All MIBs › DFL800-MIB
Organization: D-Link Corporation
Last Updated: 2010-09-02
Category: VPN and Security, Vendor: D-Link
Description: Manages D-Link DFL-800 network security appliance firewall rules and VPN configuration.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is DFL800-MIB?
DFL800-MIB is D-Link's proprietary MIB for the DFL-800 series NetDefend network security appliance, a UTM firewall/VPN gateway product, exposing system performance and firewall/session statistics for the device. Its objects span hardware/software performance monitoring (CPU load, buffer usage) and firewall-specific traffic data (forwarded bits/packets, active connections, per-protocol packet-state counters, per-interface statistics). As a monitoring target it is notable for direct CPU load and connection-state visibility, letting an administrator watch dfl800SysCpuLoad for processing overload, dfl800SysBuffUse for buffer/memory pressure, and dfl800SysConns for session-table saturation, all classic hardware/software health indicators for a security appliance under heavy load or attack. It sits under D-Link's ipsFirewall/netdefendMgmt enterprise subtree and is largely self-contained, though it complements standard IF-MIB interface counters for full traffic visibility. It is deployed on DFL-800 firewall/VPN appliances protecting small-to-midsize office or branch networks. Engineers can download the DFL800-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in DFL800-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- D-Link DFL-800 NetDefend firewall/VPN appliance
Monitoring Examples
An administrator would poll dfl800SysCpuLoad and dfl800SysBuffUse on a regular interval to detect the appliance struggling under high traffic or a DoS condition, and check dfl800SysConns alongside the per-protocol counters dfl800SysPscTcpSyn/dfl800SysPscTcpOpen/dfl800SysPscTcpFin to see whether an unusual spike in half-open TCP sessions indicates a SYN flood. The dfl800IfStatsTable would be walked per interface to correlate forwarded packet/bit counts (dfl800SysForwardedBits, dfl800SysForwardedPackets) with expected traffic patterns, and dfl800SysPscIcmp/dfl800SysPscUdp/dfl800SysPscOther would reveal an abnormal shift in protocol mix suggesting a scan or flood.
What Can Be Monitored
- CPU load
- buffer usage
- active connection count
- forwarded packets/bits
- TCP/UDP/ICMP session-state counters
- per-interface traffic statistics
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| enterprises |
From SNMPv2-TC
| DisplayString |
How to Use in IPNetwork Monitor
Example using dfl800SysForwardedBits OID:
Select a D-Link DFL-800 NetDefend firewall/VPN appliance as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type dfl800SysForwardedBits into the Find box to locate it in the OID tree, then select it and click OK. The number of bits forwarded through the gateway. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| dlink | 1.3.6.1.4.1.171 | |||
| netdefendMgmt | 1.3.6.1.4.1.171.20 | |||
| ipsFirewall | 1.3.6.1.4.1.171.20.1 | |||
| dfl800 | 1.3.6.1.4.1.171.20.1.2 | |||
| dfl800OS | 1.3.6.1.4.1.171.20.1.2.1 | |||
| dfl800OSStats | 1.3.6.1.4.1.171.20.1.2.1.2 | |||
| dfl800System | 1.3.6.1.4.1.171.20.1.2.1.2.1 | |||
| G32 dfl800SysCpuLoad | 1.3.6.1.4.1.171.20.1.2.1.2.1.1 | Gauge32 | read-only | The system cpu load. |
| C32 dfl800SysForwardedBitsEx | 1.3.6.1.4.1.171.20.1.2.1.2.1.2 | Counter32 | read-only | The number of bits forwarded through the gateway. |
| C32 dfl800SysForwardedPackets | 1.3.6.1.4.1.171.20.1.2.1.2.1.3 | Counter32 | read-only | Total number of forwarded packets. |
| G32 dfl800SysBuffUse | 1.3.6.1.4.1.171.20.1.2.1.2.1.4 | Gauge32 | read-only | The current number of buffers in use. |
| G32 dfl800SysConns | 1.3.6.1.4.1.171.20.1.2.1.2.1.5 | Gauge32 | read-only | The numer of connections. |
| dfl800SysPerStateCounters | 1.3.6.1.4.1.171.20.1.2.1.2.1.6 | |||
| G32 dfl800SysPscTcpSyn | 1.3.6.1.4.1.171.20.1.2.1.2.1.6.1 | Gauge32 | read-only | Number of TCP connections in the SYN state. |
| G32 dfl800SysPscTcpOpen | 1.3.6.1.4.1.171.20.1.2.1.2.1.6.2 | Gauge32 | read-only | Number of TCP connections in the OPEN state. |
| G32 dfl800SysPscTcpFin | 1.3.6.1.4.1.171.20.1.2.1.2.1.6.3 | Gauge32 | read-only | Number of TCP connections in the FIN state. |
| G32 dfl800SysPscUdp | 1.3.6.1.4.1.171.20.1.2.1.2.1.6.4 | Gauge32 | read-only | Number of UDP connections. |
| G32 dfl800SysPscIcmp | 1.3.6.1.4.1.171.20.1.2.1.2.1.6.5 | Gauge32 | read-only | Number of ICMP connections. |
| G32 dfl800SysPscOther | 1.3.6.1.4.1.171.20.1.2.1.2.1.6.6 | Gauge32 | read-only | Number of other connections. |
| dfl800IfStatsTable | 1.3.6.1.4.1.171.20.1.2.1.2.1.7 | not-accessible | A table of DFL-800 specific interfaces statistics | |
| dfl800IfStatsEntry | 1.3.6.1.4.1.171.20.1.2.1.2.1.7.1 | not-accessible | The row in a table of DFL-800 specific interface statistics | |
| I32 dfl800IfStatsIndex | 1.3.6.1.4.1.171.20.1.2.1.2.1.7.1.1 | Integer32 | not-accessible | Index of a row in dfl800SysIfStatsTable |
| STR dfl800IfName | 1.3.6.1.4.1.171.20.1.2.1.2.1.7.1.2 | DisplayString | read-only | The name of the interface. |
| C32 dfl800IfFragsIn | 1.3.6.1.4.1.171.20.1.2.1.2.1.7.1.3 | Counter32 | read-only | Number of IP packet fragments received in the interface. |
| C32 dfl800IfFragReassOk | 1.3.6.1.4.1.171.20.1.2.1.2.1.7.1.4 | Counter32 | read-only | Number of complete IP packets successfully reassembled from the fragments received in the interface. |
| C32 dfl800IfFragReassFail | 1.3.6.1.4.1.171.20.1.2.1.2.1.7.1.5 | Counter32 | read-only | Number of packets that could not be reassembled, either due to resource starvation, illegal fragmentation, or just packet loss. |
| C32 dfl800IfPktsInCnt | 1.3.6.1.4.1.171.20.1.2.1.2.1.7.1.6 | Counter32 | read-only | Number of packets received by the interface. |
| C32 dfl800IfPktsOutCnt | 1.3.6.1.4.1.171.20.1.2.1.2.1.7.1.7 | Counter32 | read-only | Number of packets sent by the interface |
| C32 dfl800IfBitsInCnt | 1.3.6.1.4.1.171.20.1.2.1.2.1.7.1.8 | Counter32 | read-only | Number of bits received by the interface |
| C32 dfl800IfBitsOutCnt | 1.3.6.1.4.1.171.20.1.2.1.2.1.7.1.9 | Counter32 | read-only | Number of bits sent by the interface |
| C32 dfl800IfPktsTotCnt | 1.3.6.1.4.1.171.20.1.2.1.2.1.7.1.10 | Counter32 | read-only | Totat number of packets transmited by the interface |
| C32 dfl800IfBitsTotCnt | 1.3.6.1.4.1.171.20.1.2.1.2.1.7.1.11 | Counter32 | read-only | Totat number of bits transmited by the interface |
| C64 dfl800IfHCPktsInCnt | 1.3.6.1.4.1.171.20.1.2.1.2.1.7.1.12 | Counter64 | read-only | Number of packets received by the interface. This object is a 64-bit version of dfl800IfPktsInCnt. |
| C64 dfl800IfHCPktsOutCnt | 1.3.6.1.4.1.171.20.1.2.1.2.1.7.1.13 | Counter64 | read-only | Number of packets sent by the interface. This object is a 64-bit version of dfl800IfPktsOutCnt. |
| C64 dfl800IfHCBitsInCnt | 1.3.6.1.4.1.171.20.1.2.1.2.1.7.1.14 | Counter64 | read-only | Number of bits received by the interface. This object is a 64-bit version of dfl800IfBitsInCnt. |
| C64 dfl800IfHCBitsOutCnt | 1.3.6.1.4.1.171.20.1.2.1.2.1.7.1.15 | Counter64 | read-only | Number of bits sent by the interface. This object is a 64-bit version of dfl800IfBitsOutCnt. |
| C64 dfl800IfHCPktsTotCnt | 1.3.6.1.4.1.171.20.1.2.1.2.1.7.1.16 | Counter64 | read-only | Totat number of packets transmited by the interface. This object is a 64-bit version of dfl800IfPktsTotCnt. |
| C64 dfl800IfHCBitsTotCnt | 1.3.6.1.4.1.171.20.1.2.1.2.1.7.1.17 | Counter64 | read-only | Totat number of bits transmited by the interface. This object is a 64-bit version of dfl800IfBitsTotCnt. |
| dfl800IfRxRingTable | 1.3.6.1.4.1.171.20.1.2.1.2.1.8 | not-accessible | A table of DFL-800 specific interface Rx ring statistics | |
| dfl800IfRxRingEntry | 1.3.6.1.4.1.171.20.1.2.1.2.1.8.1 | not-accessible | The row in a table of DFL-800 specific interface Rx ring statistics. | |
| I32 dfl800IfRxRingIndex | 1.3.6.1.4.1.171.20.1.2.1.2.1.8.1.1 | Integer32 | not-accessible | Index of a row in dfl800IfRxRingTable. |
| C32 dfl800IfRxRingFifoErrors | 1.3.6.1.4.1.171.20.1.2.1.2.1.8.1.2 | Counter32 | read-only | Rx Ring number of FIFO errors. |
| G32 dfl800IfRxDespools | 1.3.6.1.4.1.171.20.1.2.1.2.1.8.1.3 | Gauge32 | read-only | Number of despool events per second. |
| G32 dfl800IfRxAvgUse | 1.3.6.1.4.1.171.20.1.2.1.2.1.8.1.4 | Gauge32 | read-only | Rx Ring average usage. |
| G32 dfl800IfRxRingSaturation | 1.3.6.1.4.1.171.20.1.2.1.2.1.8.1.5 | Gauge32 | read-only | Rx Ring sturation. Percentage of ring use per despool event when the ring has been more than half full. |
| G32 dfl800RxRingFlooded | 1.3.6.1.4.1.171.20.1.2.1.2.1.8.1.6 | Gauge32 | read-only | Rx Ring number of despool events for which the ring has been completely flooded |
| dfl800IfTxRingTable | 1.3.6.1.4.1.171.20.1.2.1.2.1.9 | not-accessible | A table of DFL-800 specific interface Tx ring statistics | |
| dfl800IfTxRingEntry | 1.3.6.1.4.1.171.20.1.2.1.2.1.9.1 | not-accessible | The row in a table of DFL-800 specific interface Tx ring statistics. | |
| I32 dfl800IfTxRingIndex | 1.3.6.1.4.1.171.20.1.2.1.2.1.9.1.1 | Integer32 | not-accessible | Index of a row in dfl800IfRxRingTable. |
| G32 dfl800IfTxDespools | 1.3.6.1.4.1.171.20.1.2.1.2.1.9.1.2 | Gauge32 | read-only | Tx Ring number of despool event per second (polls when there is at least one buffer in the ring) |
| G32 dfl800IfTxAvgUse | 1.3.6.1.4.1.171.20.1.2.1.2.1.9.1.3 | Gauge32 | read-only | Tx Ring number of despool events when the ring has been completely flooded |
| G32 dfl800IfTxRingSaturation | 1.3.6.1.4.1.171.20.1.2.1.2.1.9.1.4 | Gauge32 | read-only | Tx Ring percentage of use per despool event when the ring has been more than half full. |
| G32 dfl800RxTingFlooded | 1.3.6.1.4.1.171.20.1.2.1.2.1.9.1.5 | Gauge32 | read-only | Tx Ring number of despool events for in which the ring has been completely flooded |
| dfl800IfVlanStatsTable | 1.3.6.1.4.1.171.20.1.2.1.2.1.10 | not-accessible | A table of DFL-800 VLAN statistics | |
| dfl800IfVlanStatsEntry | 1.3.6.1.4.1.171.20.1.2.1.2.1.10.1 | not-accessible | The row in a table of dfl800IfVlanStatsTable. Each has an index equal to the ifIndex of the corresponding physical interface | |
| I32 dfl800IfVlanIndex | 1.3.6.1.4.1.171.20.1.2.1.2.1.10.1.1 | Integer32 | not-accessible | Extended index of a row in dfl800IfVlanStatsTable. |
| C32 dfl800IfVlanUntaggedInPkts | 1.3.6.1.4.1.171.20.1.2.1.2.1.10.1.2 | Counter32 | read-only | Number of untaged packets untagged packets received by the interface. |
| C32 dfl800IfVlanUntaggedOutPkts | 1.3.6.1.4.1.171.20.1.2.1.2.1.10.1.3 | Counter32 | read-only | Number of untagged packets sent by the interface. |
| C32 dfl800IfVlanUntaggedTotPkts | 1.3.6.1.4.1.171.20.1.2.1.2.1.10.1.4 | Counter32 | read-only | Total number of untagged packets processed by the interface. |
| C32 dfl800IfVlanUntaggedInOctets | 1.3.6.1.4.1.171.20.1.2.1.2.1.10.1.5 | Counter32 | read-only | Total number of octects in untagged packets received by the interface. |
| C32 dfl800IfVlanUntaggedOutOctets | 1.3.6.1.4.1.171.20.1.2.1.2.1.10.1.6 | Counter32 | read-only | Total number of octects in untagged packets sent by the interface. |
| C32 dfl800IfVlanUntaggedTotOctets | 1.3.6.1.4.1.171.20.1.2.1.2.1.10.1.7 | Counter32 | read-only | Total number of octects in untagged packets processed by the interface. |
| dfl800HWSensorTable | 1.3.6.1.4.1.171.20.1.2.1.2.1.11 | not-accessible | Table of hardware sensors. | |
| dfl800HWSensorEntry | 1.3.6.1.4.1.171.20.1.2.1.2.1.11.1 | not-accessible | Entry of table of hardware sensors. | |
| I32 dfl800HWSensorIndex | 1.3.6.1.4.1.171.20.1.2.1.2.1.11.1.1 | Integer32 | not-accessible | Index of the entries of the sensor table. |
| STR dfl800HWSensorName | 1.3.6.1.4.1.171.20.1.2.1.2.1.11.1.2 | DisplayString | read-only | The description of the sensor. |
| G32 dfl800HWSensorValue | 1.3.6.1.4.1.171.20.1.2.1.2.1.11.1.3 | Gauge32 | read-only | The value of the sensor. |
| STR dfl800HWSensorUnit | 1.3.6.1.4.1.171.20.1.2.1.2.1.11.1.4 | DisplayString | read-only | The description of the unit of the value mesured by sensor. |
| G32 dfl800SysMemUsage | 1.3.6.1.4.1.171.20.1.2.1.2.1.12 | Gauge32 | read-only | The current memory usage. |
| dfl800SysTCPUsage | 1.3.6.1.4.1.171.20.1.2.1.2.1.13 | |||
| G32 dfl800SysTCPRecvSmall | 1.3.6.1.4.1.171.20.1.2.1.2.1.13.1 | Gauge32 | read-only | Small TCP receive windows usage. |
| G32 dfl800SysTCPRecvLarge | 1.3.6.1.4.1.171.20.1.2.1.2.1.13.2 | Gauge32 | read-only | Large TCP receive windows usage. |
| G32 dfl800SysTCPSendSmall | 1.3.6.1.4.1.171.20.1.2.1.2.1.13.3 | Gauge32 | read-only | Small TCP send windows usage. |
| G32 dfl800SysTCPSendLarge | 1.3.6.1.4.1.171.20.1.2.1.2.1.13.4 | Gauge32 | read-only | Large TCP send windows usage. |
| G32 dfl800SysTimerUsage | 1.3.6.1.4.1.171.20.1.2.1.2.1.14 | Gauge32 | read-only | The current number of timers in use. |
| G32 dfl800SysConnOPS | 1.3.6.1.4.1.171.20.1.2.1.2.1.15 | Gauge32 | read-only | The number of connections opened per second. |
| G32 dfl800SysConnCPS | 1.3.6.1.4.1.171.20.1.2.1.2.1.16 | Gauge32 | read-only | The number of connections closed per second. |
| C64 dfl800SysHCForwardedBits | 1.3.6.1.4.1.171.20.1.2.1.2.1.17 | Counter64 | read-only | The number of bits forwarded through the gateway. |
| dfl800VPN | 1.3.6.1.4.1.171.20.1.2.1.2.2 | |||
| dfl800IPsec | 1.3.6.1.4.1.171.20.1.2.1.2.2.1 | |||
| dfl800IPsecGlobal | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1 | |||
| G32 dfl800IPsecPhaseOneActive | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.1 | Gauge32 | read-only | Number of Phase-1 active negotiations |
| G32 dfl800IPsecPhaseOneAggrModeDone | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.2 | Gauge32 | read-only | Number of Phase-1 aggressive mode negotiations. |
| G32 dfl800IPsecQuickModeActive | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.3 | Gauge32 | read-only | Number of quick mode active negotiations. |
| C32 dfl800IPsecPhaseOneDone | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.4 | Counter32 | read-only | Number of Phase-1 negotiations done. |
| C32 dfl800IPsecPhaseOneFailed | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.5 | Counter32 | read-only | Number of Phase-1 negotiations failed. |
| C32 dfl800IPsecPhaseOneRekeyed | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.6 | Counter32 | read-only | Number of Phase-1 negotiations rekeyed. |
| C32 dfl800IPsecQuickModeDone | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.7 | Counter32 | read-only | Number of quick mode negotiations done. |
| C32 dfl800IPsecQuickModeFailed | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.8 | Counter32 | read-only | Number of quick mode negotiations failed. |
| C32 dfl800IPsecInfoDone | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.9 | Counter32 | read-only | Number of informational exchanges done. (Not available in IKEv1 implementations) |
| C32 dfl800IPsecInfoFailed | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.10 | Counter32 | read-only | Number of informational exchanges failed. (Not available in IKEv1 implementations) |
| C64 dfl800IPsecInOctetsComp | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.11 | Counter64 | read-only | Total octets in before decompression. |
| C64 dfl800IPsecInOctetsUncomp | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.12 | Counter64 | read-only | Total octets in after decompression. |
| C64 dfl800IPsecOutOctetsComp | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.13 | Counter64 | read-only | Total octets out after compression. |
| C64 dfl800IPsecOutOctetsUncomp | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.14 | Counter64 | read-only | Total octets out before compression. |
| C64 dfl800IPsecForwardedOctetsComp | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.15 | Counter64 | read-only | Total octets forwarded after compression. |
| C64 dfl800IPsecForwardedOctetsUcomp | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.16 | Counter64 | read-only | Total octets forwarded before compression. |
| C64 dfl800IPsecInPackets | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.17 | Counter64 | read-only | Total packets in. |
| C64 dfl800IPsecOutPackets | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.18 | Counter64 | read-only | Total packets Out. |
| C64 dfl800IPsecForwardedPackets | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.19 | Counter64 | read-only | Total packets forwarded. |
| G32 dfl800IPsecActiveTransforms | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.20 | Gauge32 | read-only | Number of currently active transforms. |
| C32 dfl800IPsecTotalTransforms | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.21 | Counter32 | read-only | Total number of transform records created. |
| C32 dfl800IPsecOutOfTransforms | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.22 | Counter32 | read-only | Number of packets dropped due to no available transform object. (Not available in IKEv1 implementations) |
| C32 dfl800IPsecTotalRekeys | 1.3.6.1.4.1.171.20.1.2.1.2.2.1.1.23 | Counter32 | read-only | Total number of rekeys performed. |
| dfl800Rules | 1.3.6.1.4.1.171.20.1.2.1.2.3 | |||
| dfl800RuleUseTable | 1.3.6.1.4.1.171.20.1.2.1.2.3.2 | not-accessible | A list of general rules usage statistics. | |
| dfl800RuleUseEntry | 1.3.6.1.4.1.171.20.1.2.1.2.3.2.1 | not-accessible | The statistics over a rule usage. | |
| I32 dfl800RuleIndex | 1.3.6.1.4.1.171.20.1.2.1.2.3.2.1.1 | Integer32 | not-accessible | The rule usage index. |
| STR dfl800RuleName | 1.3.6.1.4.1.171.20.1.2.1.2.3.2.1.2 | DisplayString | read-only | The name of the rule. |
| C32 dfl800RuleUse | 1.3.6.1.4.1.171.20.1.2.1.2.3.2.1.3 | Counter32 | read-only | The number of times o rule was used. |
| dfl800IPPools | 1.3.6.1.4.1.171.20.1.2.1.2.4 | |||
| I32 dfl800IPPoolsNumber | 1.3.6.1.4.1.171.20.1.2.1.2.4.1 | Integer32 | read-only | The number of ip pools |
| dfl800IPPoolTable | 1.3.6.1.4.1.171.20.1.2.1.2.4.2 | not-accessible | A list of IP pools | |
| dfl800IPPoolEntry | 1.3.6.1.4.1.171.20.1.2.1.2.4.2.1 | not-accessible | The attributes of an ip pool | |
| I32 dfl800IPPoolIndex | 1.3.6.1.4.1.171.20.1.2.1.2.4.2.1.1 | Integer32 | not-accessible | The ip pool index |
| STR dfl800IPPoolName | 1.3.6.1.4.1.171.20.1.2.1.2.4.2.1.2 | DisplayString | read-only | The ip pool name |
| G32 dfl800IPPoolPrepare | 1.3.6.1.4.1.171.20.1.2.1.2.4.2.1.3 | Gauge32 | read-only | Number of IP pool objects in prepare mode. |
| G32 dfl800IPPoolFree | 1.3.6.1.4.1.171.20.1.2.1.2.4.2.1.4 | Gauge32 | read-only | Number of available IPs in the pool. |
| G32 dfl800IPPoolMisses | 1.3.6.1.4.1.171.20.1.2.1.2.4.2.1.5 | Gauge32 | read-only | Mumber of missed IP pool negotiations for other reasons than lack of available IP numbers. |
| G32 dfl800IPPoolClientFails | 1.3.6.1.4.1.171.20.1.2.1.2.4.2.1.6 | Gauge32 | read-only | Number of failed IP pool transactions. |
| G32 dfl800IPPoolUsed | 1.3.6.1.4.1.171.20.1.2.1.2.4.2.1.7 | Gauge32 | read-only | Number of IP numbers in use from the pool. |
| dfl800DHCPServer | 1.3.6.1.4.1.171.20.1.2.1.2.5 | |||
| G32 dfl800DHCPTotalRejected | 1.3.6.1.4.1.171.20.1.2.1.2.5.1 | Gauge32 | read-only | Total number of rejected packets (all rules). |
| dfl800DHCPRuleTable | 1.3.6.1.4.1.171.20.1.2.1.2.5.2 | not-accessible | A list of all DHCP server rules usage statistics. | |
| dfl800DHCPRuleEntry | 1.3.6.1.4.1.171.20.1.2.1.2.5.2.1 | not-accessible | The attributes of a DHCP server rule statistics. | |
| I32 dfl800DHCPRuleIndex | 1.3.6.1.4.1.171.20.1.2.1.2.5.2.1.1 | Integer32 | not-accessible | The DHCP server rule index |
| STR dfl800DHCPRuleName | 1.3.6.1.4.1.171.20.1.2.1.2.5.2.1.2 | DisplayString | read-only | The DHCP server rule name. |
| G32 dfl800DHCPRuleUsage | 1.3.6.1.4.1.171.20.1.2.1.2.5.2.1.3 | Gauge32 | read-only | Number of used IPs in the pool. |
| G32 dfl800DHCPRuleUsagePercent | 1.3.6.1.4.1.171.20.1.2.1.2.5.2.1.4 | Gauge32 | read-only | The percentage of the used IPs in relation to the IP pool size. |
| G32 dfl800DHCPActiveClients | 1.3.6.1.4.1.171.20.1.2.1.2.5.2.1.5 | Gauge32 | read-only | Number of currently active clients. |
| G32 dfl800DHCPActiveClientsPercent | 1.3.6.1.4.1.171.20.1.2.1.2.5.2.1.6 | Gauge32 | read-only | The number of currently active clients as a percentage of the pool size. |
| G32 dfl800DHCPRejectedRequests | 1.3.6.1.4.1.171.20.1.2.1.2.5.2.1.7 | Gauge32 | read-only | Number of rejected requests matching the current rule. |
| G32 dfl800DHCPTotalLeases | 1.3.6.1.4.1.171.20.1.2.1.2.5.2.1.8 | Gauge32 | read-only | Total number of leases in the pool. |
| dfl800UserAuth | 1.3.6.1.4.1.171.20.1.2.1.2.6 | |||
| G32 dfl800UserAuthHTTPUsers | 1.3.6.1.4.1.171.20.1.2.1.2.6.1 | Gauge32 | read-only | Number of currently logged in HTTP users. |
| G32 dfl800UserAuthXAUTHUsers | 1.3.6.1.4.1.171.20.1.2.1.2.6.2 | Gauge32 | read-only | Number of currently logged in XAUTH users. |
| G32 dfl800UserAuthHTTPSUsers | 1.3.6.1.4.1.171.20.1.2.1.2.6.3 | Gauge32 | read-only | Number of currently logged in HTTPS users. |
| G32 dfl800UserAuthPPPUsers | 1.3.6.1.4.1.171.20.1.2.1.2.6.4 | Gauge32 | read-only | Number of currently logged in PPP users. |
| G32 dfl800UserAuthEAPUsers | 1.3.6.1.4.1.171.20.1.2.1.2.6.5 | Gauge32 | read-only | Number of currently logged in EAP users. |
| dfl800UserAuthRuleUseTable | 1.3.6.1.4.1.171.20.1.2.1.2.6.6 | not-accessible | Table of user authentication rule usage. | |
| dfl800UserAuthRuleUseEntry | 1.3.6.1.4.1.171.20.1.2.1.2.6.6.1 | not-accessible | The attributes of an authentication rule usage statistics. | |
| I32 dfl800UserAuthRuleIndex | 1.3.6.1.4.1.171.20.1.2.1.2.6.6.1.1 | Integer32 | not-accessible | The rule usage index. |
| STR dfl800UserAuthRuleName | 1.3.6.1.4.1.171.20.1.2.1.2.6.6.1.2 | DisplayString | read-only | The name of the rule. |
| C32 dfl800UserAuthRuleUse | 1.3.6.1.4.1.171.20.1.2.1.2.6.6.1.3 | Counter32 | read-only | The number of times o rule was used. |
| dfl800LinkMonitor | 1.3.6.1.4.1.171.20.1.2.1.2.7 | |||
| I32 dfl800LinkMonGrp | 1.3.6.1.4.1.171.20.1.2.1.2.7.1 | Integer32 | read-only | The number of groups of monitored links |
| dfl800LinkMonGrpTable | 1.3.6.1.4.1.171.20.1.2.1.2.7.2 | not-accessible | Table of link monitor groups. | |
| dfl800LinkMonGrpEntry | 1.3.6.1.4.1.171.20.1.2.1.2.7.2.1 | not-accessible | The attributes of a link monitor group | |
| I32 dfl800LinkMonGrpIndex | 1.3.6.1.4.1.171.20.1.2.1.2.7.2.1.1 | Integer32 | not-accessible | The index row in the table of link monitor groups. |
| STR dfl800LinkMonGrpName | 1.3.6.1.4.1.171.20.1.2.1.2.7.2.1.2 | DisplayString | read-only | The link monitor group name. |
| G32 dfl800LinkMonGrpHostsUp | 1.3.6.1.4.1.171.20.1.2.1.2.7.2.1.3 | Gauge32 | read-only | The percentage of monitored hosts available. |
| dfl800LinkMonHostTable | 1.3.6.1.4.1.171.20.1.2.1.2.7.3 | not-accessible | Table of link monitored hosts in a link monnitor group. | |
| dfl800LinkMonHostEntry | 1.3.6.1.4.1.171.20.1.2.1.2.7.3.1 | not-accessible | The attributes of a monitored host. | |
| I32 dfl800LinkMonHostIndex | 1.3.6.1.4.1.171.20.1.2.1.2.7.3.1.1 | Integer32 | not-accessible | The index an host in the table of link monitor hosts. |
| STR dfl800LinkMonHostId | 1.3.6.1.4.1.171.20.1.2.1.2.7.3.1.2 | DisplayString | read-only | The monitored host identifier. |
| G32 dfl800LinkMonHostShortTermLoss | 1.3.6.1.4.1.171.20.1.2.1.2.7.3.1.3 | Gauge32 | read-only | The percentage of short term losst packets. |
| C32 dfl800LinkMonHostPacketsLost | 1.3.6.1.4.1.171.20.1.2.1.2.7.3.1.4 | Counter32 | read-only | Total number of lost monitoring packets. |
| dfl800Pipes | 1.3.6.1.4.1.171.20.1.2.1.2.8 | |||
| G32 dfl800PipeUsers | 1.3.6.1.4.1.171.20.1.2.1.2.8.1 | Gauge32 | read-only | The current number of users, as defined by the grouping settings of each pipe, being tracked in the pipes system. Note that this value corresponds to the number of users active in each time slice of 1/20th of a second, and not to the number of users having open connections. |
| dfl800PipeTable | 1.3.6.1.4.1.171.20.1.2.1.2.8.2 | not-accessible | Table of pipes | |
| dfl800PipeEntry | 1.3.6.1.4.1.171.20.1.2.1.2.8.2.1 | not-accessible | A entry of the pipes table | |
| I32 dfl800PipeIndex | 1.3.6.1.4.1.171.20.1.2.1.2.8.2.1.1 | Integer32 | not-accessible | The pipe index |
| STR dfl800PipeName | 1.3.6.1.4.1.171.20.1.2.1.2.8.2.1.2 | DisplayString | read-only | The name of the pipe |
| I32 dfl800PipeMinPrec | 1.3.6.1.4.1.171.20.1.2.1.2.8.2.1.3 | Integer32 | read-only | The minimum of the range of pipe precedences. |
| I32 dfl800PipeMaxPrec | 1.3.6.1.4.1.171.20.1.2.1.2.8.2.1.4 | Integer32 | read-only | The maximum of the range of pipe precedences. |
| I32 dfl800PipeDefPrec | 1.3.6.1.4.1.171.20.1.2.1.2.8.2.1.5 | Integer32 | read-only | The precedence assigned to a packet for which has not one allready done by a Pipe Rule. |
| I32 dfl800PipeNumPrec | 1.3.6.1.4.1.171.20.1.2.1.2.8.2.1.6 | Integer32 | read-only | The number of pipe precedences |
| G32 dfl800PipeNumUsers | 1.3.6.1.4.1.171.20.1.2.1.2.8.2.1.7 | Gauge32 | read-only | The current number of users, as defined by the grouping settings of each pipe, being tracked in the pipes system. This value corresponds to the number of users active in each time slice and not to the number of users having open connections. |
| G32 dfl800PipeCurrentBps | 1.3.6.1.4.1.171.20.1.2.1.2.8.2.1.8 | Gauge32 | read-only | The current throughput of a pipe, in bits per second, as a sum of the corresponding values for all precedences. |
| G32 dfl800PipeCurrentPps | 1.3.6.1.4.1.171.20.1.2.1.2.8.2.1.9 | Gauge32 | read-only | The current throughput of a pipe, in packets per second, as a sum of the corresponding values for all precedences. |
| C32 dfl800PipeDelayedPackets | 1.3.6.1.4.1.171.20.1.2.1.2.8.2.1.10 | Counter32 | read-only | The number of times packets have been delayed as a result of a pipe, or pipe user having used up its allotted bandwidth. Note that one single packet may be delayed several times; if a pipe is really full, this count may exceed the number of packets actually passing through the pipe. |
| C32 dfl800PipeDropedPackets | 1.3.6.1.4.1.171.20.1.2.1.2.8.2.1.11 | Counter32 | read-only | The number of packets dropped by a pipe. Packets are dropped when CorePlus is running out of packet buffers. This occurs when excessive amounts of packets need to be queued for later delivery. The packet dropped is always the one that has been queued the longest time globally, which means that the connection suffering from packet loss will be the one most overloading the system. |
| dfl800PipePrecTable | 1.3.6.1.4.1.171.20.1.2.1.2.8.3 | not-accessible | There is a one to many relation between a pipe and its precedences. The number of precedences is a instance attribute of each pipe. This table extends the pipes table in order to express the relation between a pipe and the respective precedences. | |
| dfl800PipePrecEntry | 1.3.6.1.4.1.171.20.1.2.1.2.8.3.1 | not-accessible | An entry of the table of pipe pecedences. These table entries are chracterized by been indexed by two values. The first index the same as the pipe index of the corresponding row in table of pipes and the second index is the index of the set of precedences of the corresponding pipe. | |
| I32 dfl800PipePrecIndex | 1.3.6.1.4.1.171.20.1.2.1.2.8.3.1.1 | Integer32 | not-accessible | Index of a precedence of a specific pipe. This is the second index of the entries of pipe precedence table described by object dfl800PipePrecEntry. |
| I32 dfl800PipePrec | 1.3.6.1.4.1.171.20.1.2.1.2.8.3.1.2 | Integer32 | read-only | The precedence value |
| G32 dfl800PipePrecBps | 1.3.6.1.4.1.171.20.1.2.1.2.8.3.1.3 | Gauge32 | read-only | The current throughput of the pipe, in bits per second, with the corresponding precedence. |
| G32 dfl800PipePrecTotalPps | 1.3.6.1.4.1.171.20.1.2.1.2.8.3.1.4 | Gauge32 | read-only | The current throughput of the pipe precedence, in packets per second. |
| G32 dfl800PipePrecReservedBps | 1.3.6.1.4.1.171.20.1.2.1.2.8.3.1.5 | Gauge32 | read-only | The current bandwidth allocated to the precedence. |
| G32 dfl800PipePrecDynLimBps | 1.3.6.1.4.1.171.20.1.2.1.2.8.3.1.6 | Gauge32 | read-only | The current bandwidth limit limit applied the precedence. |
| G32 dfl800PipePrecDynUsrLimBps | 1.3.6.1.4.1.171.20.1.2.1.2.8.3.1.7 | Gauge32 | read-only | The current precedence bandwidth limit per user of the pipe. |
| C32 dfl800PipePrecDelayedPackets | 1.3.6.1.4.1.171.20.1.2.1.2.8.3.1.8 | Counter32 | read-only | The number of times packets have been delayed as a result of a precedence, or pipe user having used up its allotted bandwidth. Note that one single packet may be delayed several times; if a pipe is really full, this count may exceed the number of packets of this precedence actually passing through the pipe. |
| C32 dfl800PipePrecDropedPackets | 1.3.6.1.4.1.171.20.1.2.1.2.8.3.1.9 | Counter32 | read-only | The number of pipe dropped packets with the corresponding precedence. |
| dfl800ALG | 1.3.6.1.4.1.171.20.1.2.1.2.9 | |||
| G32 dfl800AlgSessions | 1.3.6.1.4.1.171.20.1.2.1.2.9.1 | Gauge32 | read-only | Total ALG sessions |
| G32 dfl800AlgConnections | 1.3.6.1.4.1.171.20.1.2.1.2.9.2 | Gauge32 | read-only | Total ALG connections |
| G32 dfl800AlgTCPStreams | 1.3.6.1.4.1.171.20.1.2.1.2.9.3 | Gauge32 | read-only | Total ALG TCP streams |
| dfl800HttpAlg | 1.3.6.1.4.1.171.20.1.2.1.2.9.4 | |||
| dfl800HttpAlgTable | 1.3.6.1.4.1.171.20.1.2.1.2.9.4.1 | not-accessible | Table of HTTP ALG objects. | |
| dfl800HttpAlgEntry | 1.3.6.1.4.1.171.20.1.2.1.2.9.4.1.1 | not-accessible | A row of the table of HTTP ALG objects. | |
| I32 dfl800HttpAlgIndex | 1.3.6.1.4.1.171.20.1.2.1.2.9.4.1.1.1 | Integer32 | not-accessible | The index of an entry of the Table of HTTP ALG objects. |
| STR dfl800HttpAlgName | 1.3.6.1.4.1.171.20.1.2.1.2.9.4.1.1.2 | DisplayString | read-only | The name of an HTTP ALG object. |
| G32 dfl800HttpAlgTotalRequested | 1.3.6.1.4.1.171.20.1.2.1.2.9.4.1.1.3 | Gauge32 | read-only | Total number of URL requests. |
| G32 dfl800HttpAlgTotalAllowed | 1.3.6.1.4.1.171.20.1.2.1.2.9.4.1.1.4 | Gauge32 | read-only | Total number of allowed URL requests. |
| G32 dfl800HttpAlgTotalBlocked | 1.3.6.1.4.1.171.20.1.2.1.2.9.4.1.1.5 | Gauge32 | read-only | Total number of blocked URL requests. |
| dfl800HttpAlgCntFltTable | 1.3.6.1.4.1.171.20.1.2.1.2.9.4.2 | not-accessible | Table of HTTP ALG content filtering rules. | |
| dfl800HttpAlgCntFltEntry | 1.3.6.1.4.1.171.20.1.2.1.2.9.4.2.1 | not-accessible | Entry of the table of HTTP ALG content filtering rules. | |
| I32 dfl800HttpAlgCntFltIndex | 1.3.6.1.4.1.171.20.1.2.1.2.9.4.2.1.1 | Integer32 | not-accessible | The index of an entry of the Table of HTTP ALG content filtering objects. |
| STR dfl800HttpAlgCntFltName | 1.3.6.1.4.1.171.20.1.2.1.2.9.4.2.1.2 | DisplayString | read-only | The name of the a HTTP ALG content fitering. |
| G32 dfl800HttpAlgCntFltRequests | 1.3.6.1.4.1.171.20.1.2.1.2.9.4.2.1.3 | Gauge32 | read-only | Total number of URLs intercepted by a content filtering object. |
| G32 dfl800HttpAlgCntFltAllowed | 1.3.6.1.4.1.171.20.1.2.1.2.9.4.2.1.4 | Gauge32 | read-only | Total number of URLs intercepted and allowed by a content filtering object. |
| G32 dfl800HttpAlgCntFltBlocked | 1.3.6.1.4.1.171.20.1.2.1.2.9.4.2.1.5 | Gauge32 | read-only | Total number of URLs intercepted and blocked by a content filtering object. |
| dfl800SmtpAlg | 1.3.6.1.4.1.171.20.1.2.1.2.9.5 | |||
| dfl800SmtpAlgTable | 1.3.6.1.4.1.171.20.1.2.1.2.9.5.1 | not-accessible | Table of SMTP ALG objects. | |
| dfl800SmtpAlgEntry | 1.3.6.1.4.1.171.20.1.2.1.2.9.5.1.1 | not-accessible | A row of the table of SMTP ALG objects. | |
| I32 dfl800SmtpAlgIndex | 1.3.6.1.4.1.171.20.1.2.1.2.9.5.1.1.1 | Integer32 | not-accessible | The index of an entry of the Table of SMTP ALG objects. |
| STR dfl800SmtpAlgName | 1.3.6.1.4.1.171.20.1.2.1.2.9.5.1.1.2 | DisplayString | read-only | The name of an SMTP ALG object. |
| G32 dfl800SmtpAlgTotCheckedSes | 1.3.6.1.4.1.171.20.1.2.1.2.9.5.1.1.3 | Gauge32 | read-only | Total sessions checked by the SMTP ALG of corresponding index. |
| G32 dfl800SmtpAlgTotSpamSes | 1.3.6.1.4.1.171.20.1.2.1.2.9.5.1.1.4 | Gauge32 | read-only | Total spam sessions detected by the SMTP ALG of corresponding index. |
| G32 dfl800SmtpAlgTotDroppedSes | 1.3.6.1.4.1.171.20.1.2.1.2.9.5.1.1.5 | Gauge32 | read-only | Total deroped sessions for the SMTP ALG of corresponding index. |
| dfl800SmtpAlgDnsBlTable | 1.3.6.1.4.1.171.20.1.2.1.2.9.5.2 | not-accessible | Table of SMTP ALG DNS balck list objects. | |
| dfl800SmtpAlgDnsBlEntry | 1.3.6.1.4.1.171.20.1.2.1.2.9.5.2.1 | not-accessible | A row of the table of SMTP ALG DNS black list objects. | |
| I32 dfl800SmtpAlgDnsBlIndex | 1.3.6.1.4.1.171.20.1.2.1.2.9.5.2.1.1 | Integer32 | not-accessible | The index of an entry of the SMTP ALG DNS black list objects. |
| STR dfl800SmtpAlgDnsBlName | 1.3.6.1.4.1.171.20.1.2.1.2.9.5.2.1.2 | DisplayString | read-only | The SMTP DNS black list name. |
| G32 dfl800SmtpAlgDnsBlChecked | 1.3.6.1.4.1.171.20.1.2.1.2.9.5.2.1.3 | Gauge32 | read-only | Total sessions checked againt SMTP ALG DNS black list of corresponding index |
| G32 dfl800SmtpAlgDnsBlMatched | 1.3.6.1.4.1.171.20.1.2.1.2.9.5.2.1.4 | Gauge32 | read-only | Total sessions that matched SMTP ALG DNS black list of corresponding index |
| G32 dfl800SmtpAlgDnsBlFailChecks | 1.3.6.1.4.1.171.20.1.2.1.2.9.5.2.1.5 | Gauge32 | read-only | Total failed checks for the SMTP ALG DNS black list of corresponding index |
| dfl800DHCPRelay | 1.3.6.1.4.1.171.20.1.2.1.2.11 | |||
| G32 dfl800DHCPRelayCurClients | 1.3.6.1.4.1.171.20.1.2.1.2.11.1 | Gauge32 | read-only | Total DHCP relay active relayed clients. |
| G32 dfl800DHCPRelayCurTrans | 1.3.6.1.4.1.171.20.1.2.1.2.11.2 | Gauge32 | read-only | Ongoing DHCP relay transactions. |
| G32 dfl800DHCPRelayRejected | 1.3.6.1.4.1.171.20.1.2.1.2.11.3 | Gauge32 | read-only | Total DHCP relay packets rejected. |
| dfl800DHCPRelayRuleTable | 1.3.6.1.4.1.171.20.1.2.1.2.11.4 | not-accessible | Table of DHCP relay rules. | |
| dfl800DHCPRelayRuleEntry | 1.3.6.1.4.1.171.20.1.2.1.2.11.4.1 | not-accessible | Entry of the table of DHCP relay rules | |
| I32 dfl800DHCPRelayRuleIndex | 1.3.6.1.4.1.171.20.1.2.1.2.11.4.1.1 | Integer32 | not-accessible | Index of the table of DHCP relay rules. |
| STR dfl800DHCPRelayRuleName | 1.3.6.1.4.1.171.20.1.2.1.2.11.4.1.2 | DisplayString | read-only | Display name of a DHCP relay rule |
| G32 dfl800DHCPRelayRuleHits | 1.3.6.1.4.1.171.20.1.2.1.2.11.4.1.3 | Gauge32 | read-only | Number of the times the DHCP relay rule with corresponding index was used. |
| G32 dfl800DHCPRelayRuleCurClients | 1.3.6.1.4.1.171.20.1.2.1.2.11.4.1.4 | Gauge32 | read-only | Number of ctive relayed clients by the DHCP relay rule with corresponding index. |
| G32 dfl800DHCPRelayRuleRejCliPkts | 1.3.6.1.4.1.171.20.1.2.1.2.11.4.1.5 | Gauge32 | read-only | Number of client packets rejected by a rule. |
| G32 dfl800DHCPRelayRuleRejSrvPkts | 1.3.6.1.4.1.171.20.1.2.1.2.11.4.1.6 | Gauge32 | read-only | Number of DHCP server packets rejected by the DHCP relay rule with the corresponding index. |
| dfl800HA | 1.3.6.1.4.1.171.20.1.2.1.2.12 | |||
| G32 dfl800HASyncSendQueueLength | 1.3.6.1.4.1.171.20.1.2.1.2.12.1 | Gauge32 | read-only | Size of the queue used for the High Availability sync interface. |
| G32 dfl800HASyncSendQueueUsagePkt | 1.3.6.1.4.1.171.20.1.2.1.2.12.2 | Gauge32 | read-only | High Availability Sync interface queue usage in number of packets. |
| G32 dfl800HASyncSendQueueUsageOct | 1.3.6.1.4.1.171.20.1.2.1.2.12.3 | Gauge32 | read-only | High Availability Sync interface queue usage in number of octects. |
| C32 dfl800HASyncSentPackets | 1.3.6.1.4.1.171.20.1.2.1.2.12.4 | Counter32 | read-only | Number High Availability packets sent on Sync. |
| C32 dfl800HASyncSendResentPackets | 1.3.6.1.4.1.171.20.1.2.1.2.12.5 | Counter32 | read-only | Number of High Availability packets resent on Sync. |
| dfl800reg | 1.3.6.1.4.1.171.20.1.2.2 | |||
| dfl800MibModules | 1.3.6.1.4.1.171.20.1.2.2.1 | |||
| dfl800_MIB | 1.3.6.1.4.1.171.20.1.2.2.1.2 | The MIB module for D-Link DFL-800 series product. | ||
| dfl800MibConfs | 1.3.6.1.4.1.171.20.1.2.2.2 | |||
| dfl800StatsConformance | 1.3.6.1.4.1.171.20.1.2.2.2.1 | |||
| dfl800StatsCompliance | 1.3.6.1.4.1.171.20.1.2.2.2.1.1 | Module Compliance | ||
| dfl800MibObjectGroups | 1.3.6.1.4.1.171.20.1.2.2.3 | |||
| dfl800StatsRegGroups | 1.3.6.1.4.1.171.20.1.2.2.3.1 | |||
| dfl800SystemObjectGroup | 1.3.6.1.4.1.171.20.1.2.2.3.1.1 | System statistics Group | ||
| dfl800IPsecObjectGroup | 1.3.6.1.4.1.171.20.1.2.2.3.1.2 | IPsec Group | ||
| dfl800StateCountersGroup | 1.3.6.1.4.1.171.20.1.2.2.3.1.3 | Per state counters | ||
| dfl800IPPoolGroup | 1.3.6.1.4.1.171.20.1.2.2.3.1.4 | IP pool entry objects group | ||
| dfl800DHCPServerGroup | 1.3.6.1.4.1.171.20.1.2.2.3.1.5 | DHCP server rules objects. | ||
| dfl800RuleUseGroup | 1.3.6.1.4.1.171.20.1.2.2.3.1.6 | Rule use objects. | ||
| dfl800UserAuthGroup | 1.3.6.1.4.1.171.20.1.2.2.3.1.7 | User auth objects. | ||
| dfl800IfStatsGroup | 1.3.6.1.4.1.171.20.1.2.2.3.1.8 | DFL-800 interface statistics group. | ||
| dfl800LinkMonitorGroup | 1.3.6.1.4.1.171.20.1.2.2.3.1.9 | DFL-800 link monitor statistics group | ||
| dfl800PipesObjectGroup | 1.3.6.1.4.1.171.20.1.2.2.3.1.10 | DFL-800 pipes statistics group | ||
| dfl800DHCPRelayObjectGroup | 1.3.6.1.4.1.171.20.1.2.2.3.1.12 | DFL-800 DHCP relay statistics group | ||
| dfl800AlgGroup | 1.3.6.1.4.1.171.20.1.2.2.3.1.13 | DFL-800 HTTP ALG statistics group | ||
| dfl800HAGroup | 1.3.6.1.4.1.171.20.1.2.2.3.1.14 | DFL-800 HA statistics group | ||
| dfl800IfVlanGroup | 1.3.6.1.4.1.171.20.1.2.2.3.1.15 | DFL-800 VLAN statistics group | ||
| dfl800SmtpAlgGroup | 1.3.6.1.4.1.171.20.1.2.2.3.1.16 | Clavister SMTP ALG objects group | ||
| dfl800SysTCPGroup | 1.3.6.1.4.1.171.20.1.2.2.3.1.17 | DFL-800 TCP buffer usage group |
RFC description
D-Link DFL-800 series firewall device management and performance statistics.
Start monitoring D-Link DFL-800 NetDefend firewall/VPN appliance with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.