All MIBs › DFL1660-MIB
Organization: D-Link Corporation
Last Updated: 2010-09-02
Category: VPN and Security, Vendor: D-Link
Description: Manages D-Link DFL-1660 firewall/UTM security appliance configuration and security policies.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is DFL1660-MIB?
DFL1660-MIB is a D-Link vendor-specific MIB written for the DFL-1660 series firewall/UTM security appliance. It exposes hardware health through dfl1660HWSensorTable (indexed sensor name/value/unit entries for temperature, fan, and voltage sensors), traffic and policy visibility through dfl1660RuleUseTable and the per-interface dfl1660IfStatsTable/dfl1660IfVlanStatsTable/dfl1660IfRxRingTable/dfl1660IfTxRingTable, and application-layer gateway state via dfl1660HttpAlgTable and dfl1660SmtpAlgTable, alongside traffic-shaping objects in dfl1660PipeTable/dfl1660PipePrecTable and DHCP service tables (dfl1660DHCPRelayRuleTable, dfl1660DHCPRuleTable, dfl1660IPPoolTable). This combination of hardware sensors, per-rule hit counters, and ALG/DHCP state makes it useful for both physical health monitoring and security-policy effectiveness checks on the appliance. It is self-contained and does not depend on other vendor MIBs beyond standard SNMPv2-SMI/TC imports. It is deployed on D-Link DFL-1660 firewall appliances protecting small-to-midsize network perimeters, and security teams typically perform a DFL1660-MIB download from D-Link to load the module into their monitoring system.
IPNetwork Monitor allows you to monitor SNMP objects defined in DFL1660-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- D-Link DFL-1660 firewall/UTM security appliance
Monitoring Examples
An operator polls dfl1660HWSensorTable for the appliance's fan and temperature sensor values and cross-checks dfl1660RuleUseTable hit counts for a critical security rule; a fan sensor reading of zero combined with a rising temperature sensor value would flag imminent thermal risk to the firewall hardware.
What Can Be Monitored
- hardware sensor table readings (temperature/fan/voltage)
- firewall rule usage counters
- traffic shaping pipe/precedence table entries
- interface RX/TX ring and VLAN statistics
- DHCP relay/rule and IP pool table entries
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| enterprises |
From SNMPv2-TC
| DisplayString |
How to Use in IPNetwork Monitor
Example using dfl1660SysForwardedBits OID:
Select a D-Link DFL-1660 firewall/UTM security appliance as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type dfl1660SysForwardedBits into the Find box to locate it in the OID tree, then select it and click OK. The number of bits forwarded through the gateway. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| dlink | 1.3.6.1.4.1.171 | |||
| netdefendMgmt | 1.3.6.1.4.1.171.20 | |||
| utmFirewall | 1.3.6.1.4.1.171.20.2 | |||
| dfl1660 | 1.3.6.1.4.1.171.20.2.3 | |||
| dfl1660OS | 1.3.6.1.4.1.171.20.2.3.1 | |||
| dfl1660OSStats | 1.3.6.1.4.1.171.20.2.3.1.2 | |||
| dfl1660System | 1.3.6.1.4.1.171.20.2.3.1.2.1 | |||
| G32 dfl1660SysCpuLoad | 1.3.6.1.4.1.171.20.2.3.1.2.1.1 | Gauge32 | read-only | The system cpu load. |
| C32 dfl1660SysForwardedBitsEx | 1.3.6.1.4.1.171.20.2.3.1.2.1.2 | Counter32 | read-only | The number of bits forwarded through the gateway. |
| C32 dfl1660SysForwardedPackets | 1.3.6.1.4.1.171.20.2.3.1.2.1.3 | Counter32 | read-only | Total number of forwarded packets. |
| G32 dfl1660SysBuffUse | 1.3.6.1.4.1.171.20.2.3.1.2.1.4 | Gauge32 | read-only | The current number of buffers in use. |
| G32 dfl1660SysConns | 1.3.6.1.4.1.171.20.2.3.1.2.1.5 | Gauge32 | read-only | The numer of connections. |
| dfl1660SysPerStateCounters | 1.3.6.1.4.1.171.20.2.3.1.2.1.6 | |||
| G32 dfl1660SysPscTcpSyn | 1.3.6.1.4.1.171.20.2.3.1.2.1.6.1 | Gauge32 | read-only | Number of TCP connections in the SYN state. |
| G32 dfl1660SysPscTcpOpen | 1.3.6.1.4.1.171.20.2.3.1.2.1.6.2 | Gauge32 | read-only | Number of TCP connections in the OPEN state. |
| G32 dfl1660SysPscTcpFin | 1.3.6.1.4.1.171.20.2.3.1.2.1.6.3 | Gauge32 | read-only | Number of TCP connections in the FIN state. |
| G32 dfl1660SysPscUdp | 1.3.6.1.4.1.171.20.2.3.1.2.1.6.4 | Gauge32 | read-only | Number of UDP connections. |
| G32 dfl1660SysPscIcmp | 1.3.6.1.4.1.171.20.2.3.1.2.1.6.5 | Gauge32 | read-only | Number of ICMP connections. |
| G32 dfl1660SysPscOther | 1.3.6.1.4.1.171.20.2.3.1.2.1.6.6 | Gauge32 | read-only | Number of other connections. |
| dfl1660IfStatsTable | 1.3.6.1.4.1.171.20.2.3.1.2.1.7 | not-accessible | A table of DFL-1660 specific interfaces statistics | |
| dfl1660IfStatsEntry | 1.3.6.1.4.1.171.20.2.3.1.2.1.7.1 | not-accessible | The row in a table of DFL-1660 specific interface statistics | |
| I32 dfl1660IfStatsIndex | 1.3.6.1.4.1.171.20.2.3.1.2.1.7.1.1 | Integer32 | not-accessible | Index of a row in dfl1660SysIfStatsTable |
| STR dfl1660IfName | 1.3.6.1.4.1.171.20.2.3.1.2.1.7.1.2 | DisplayString | read-only | The name of the interface. |
| C32 dfl1660IfFragsIn | 1.3.6.1.4.1.171.20.2.3.1.2.1.7.1.3 | Counter32 | read-only | Number of IP packet fragments received in the interface. |
| C32 dfl1660IfFragReassOk | 1.3.6.1.4.1.171.20.2.3.1.2.1.7.1.4 | Counter32 | read-only | Number of complete IP packets successfully reassembled from the fragments received in the interface. |
| C32 dfl1660IfFragReassFail | 1.3.6.1.4.1.171.20.2.3.1.2.1.7.1.5 | Counter32 | read-only | Number of packets that could not be reassembled, either due to resource starvation, illegal fragmentation, or just packet loss. |
| C32 dfl1660IfPktsInCnt | 1.3.6.1.4.1.171.20.2.3.1.2.1.7.1.6 | Counter32 | read-only | Number of packets received by the interface. |
| C32 dfl1660IfPktsOutCnt | 1.3.6.1.4.1.171.20.2.3.1.2.1.7.1.7 | Counter32 | read-only | Number of packets sent by the interface |
| C32 dfl1660IfBitsInCnt | 1.3.6.1.4.1.171.20.2.3.1.2.1.7.1.8 | Counter32 | read-only | Number of bits received by the interface |
| C32 dfl1660IfBitsOutCnt | 1.3.6.1.4.1.171.20.2.3.1.2.1.7.1.9 | Counter32 | read-only | Number of bits sent by the interface |
| C32 dfl1660IfPktsTotCnt | 1.3.6.1.4.1.171.20.2.3.1.2.1.7.1.10 | Counter32 | read-only | Totat number of packets transmited by the interface |
| C32 dfl1660IfBitsTotCnt | 1.3.6.1.4.1.171.20.2.3.1.2.1.7.1.11 | Counter32 | read-only | Totat number of bits transmited by the interface |
| C64 dfl1660IfHCPktsInCnt | 1.3.6.1.4.1.171.20.2.3.1.2.1.7.1.12 | Counter64 | read-only | Number of packets received by the interface. This object is a 64-bit version of dfl1660IfPktsInCnt. |
| C64 dfl1660IfHCPktsOutCnt | 1.3.6.1.4.1.171.20.2.3.1.2.1.7.1.13 | Counter64 | read-only | Number of packets sent by the interface. This object is a 64-bit version of dfl1660IfPktsOutCnt. |
| C64 dfl1660IfHCBitsInCnt | 1.3.6.1.4.1.171.20.2.3.1.2.1.7.1.14 | Counter64 | read-only | Number of bits received by the interface. This object is a 64-bit version of dfl1660IfBitsInCnt. |
| C64 dfl1660IfHCBitsOutCnt | 1.3.6.1.4.1.171.20.2.3.1.2.1.7.1.15 | Counter64 | read-only | Number of bits sent by the interface. This object is a 64-bit version of dfl1660IfBitsOutCnt. |
| C64 dfl1660IfHCPktsTotCnt | 1.3.6.1.4.1.171.20.2.3.1.2.1.7.1.16 | Counter64 | read-only | Totat number of packets transmited by the interface. This object is a 64-bit version of dfl1660IfPktsTotCnt. |
| C64 dfl1660IfHCBitsTotCnt | 1.3.6.1.4.1.171.20.2.3.1.2.1.7.1.17 | Counter64 | read-only | Totat number of bits transmited by the interface. This object is a 64-bit version of dfl1660IfBitsTotCnt. |
| dfl1660IfRxRingTable | 1.3.6.1.4.1.171.20.2.3.1.2.1.8 | not-accessible | A table of DFL-1660 specific interface Rx ring statistics | |
| dfl1660IfRxRingEntry | 1.3.6.1.4.1.171.20.2.3.1.2.1.8.1 | not-accessible | The row in a table of DFL-1660 specific interface Rx ring statistics. | |
| I32 dfl1660IfRxRingIndex | 1.3.6.1.4.1.171.20.2.3.1.2.1.8.1.1 | Integer32 | not-accessible | Index of a row in dfl1660IfRxRingTable. |
| C32 dfl1660IfRxRingFifoErrors | 1.3.6.1.4.1.171.20.2.3.1.2.1.8.1.2 | Counter32 | read-only | Rx Ring number of FIFO errors. |
| G32 dfl1660IfRxDespools | 1.3.6.1.4.1.171.20.2.3.1.2.1.8.1.3 | Gauge32 | read-only | Number of despool events per second. |
| G32 dfl1660IfRxAvgUse | 1.3.6.1.4.1.171.20.2.3.1.2.1.8.1.4 | Gauge32 | read-only | Rx Ring average usage. |
| G32 dfl1660IfRxRingSaturation | 1.3.6.1.4.1.171.20.2.3.1.2.1.8.1.5 | Gauge32 | read-only | Rx Ring sturation. Percentage of ring use per despool event when the ring has been more than half full. |
| G32 dfl1660RxRingFlooded | 1.3.6.1.4.1.171.20.2.3.1.2.1.8.1.6 | Gauge32 | read-only | Rx Ring number of despool events for which the ring has been completely flooded |
| dfl1660IfTxRingTable | 1.3.6.1.4.1.171.20.2.3.1.2.1.9 | not-accessible | A table of DFL-1660 specific interface Tx ring statistics | |
| dfl1660IfTxRingEntry | 1.3.6.1.4.1.171.20.2.3.1.2.1.9.1 | not-accessible | The row in a table of DFL-1660 specific interface Tx ring statistics. | |
| I32 dfl1660IfTxRingIndex | 1.3.6.1.4.1.171.20.2.3.1.2.1.9.1.1 | Integer32 | not-accessible | Index of a row in dfl1660IfRxRingTable. |
| G32 dfl1660IfTxDespools | 1.3.6.1.4.1.171.20.2.3.1.2.1.9.1.2 | Gauge32 | read-only | Tx Ring number of despool event per second (polls when there is at least one buffer in the ring) |
| G32 dfl1660IfTxAvgUse | 1.3.6.1.4.1.171.20.2.3.1.2.1.9.1.3 | Gauge32 | read-only | Tx Ring number of despool events when the ring has been completely flooded |
| G32 dfl1660IfTxRingSaturation | 1.3.6.1.4.1.171.20.2.3.1.2.1.9.1.4 | Gauge32 | read-only | Tx Ring percentage of use per despool event when the ring has been more than half full. |
| G32 dfl1660RxTingFlooded | 1.3.6.1.4.1.171.20.2.3.1.2.1.9.1.5 | Gauge32 | read-only | Tx Ring number of despool events for in which the ring has been completely flooded |
| dfl1660IfVlanStatsTable | 1.3.6.1.4.1.171.20.2.3.1.2.1.10 | not-accessible | A table of DFL-1660 VLAN statistics | |
| dfl1660IfVlanStatsEntry | 1.3.6.1.4.1.171.20.2.3.1.2.1.10.1 | not-accessible | The row in a table of dfl1660IfVlanStatsTable. Each has an index equal to the ifIndex of the corresponding physical interface | |
| I32 dfl1660IfVlanIndex | 1.3.6.1.4.1.171.20.2.3.1.2.1.10.1.1 | Integer32 | not-accessible | Extended index of a row in dfl1660IfVlanStatsTable. |
| C32 dfl1660IfVlanUntaggedInPkts | 1.3.6.1.4.1.171.20.2.3.1.2.1.10.1.2 | Counter32 | read-only | Number of untaged packets untagged packets received by the interface. |
| C32 dfl1660IfVlanUntaggedOutPkts | 1.3.6.1.4.1.171.20.2.3.1.2.1.10.1.3 | Counter32 | read-only | Number of untagged packets sent by the interface. |
| C32 dfl1660IfVlanUntaggedTotPkts | 1.3.6.1.4.1.171.20.2.3.1.2.1.10.1.4 | Counter32 | read-only | Total number of untagged packets processed by the interface. |
| C32 dfl1660IfVlanUntaggedInOctets | 1.3.6.1.4.1.171.20.2.3.1.2.1.10.1.5 | Counter32 | read-only | Total number of octects in untagged packets received by the interface. |
| C32 dfl1660IfVlanUntaggedOutOctets | 1.3.6.1.4.1.171.20.2.3.1.2.1.10.1.6 | Counter32 | read-only | Total number of octects in untagged packets sent by the interface. |
| C32 dfl1660IfVlanUntaggedTotOctets | 1.3.6.1.4.1.171.20.2.3.1.2.1.10.1.7 | Counter32 | read-only | Total number of octects in untagged packets processed by the interface. |
| dfl1660HWSensorTable | 1.3.6.1.4.1.171.20.2.3.1.2.1.11 | not-accessible | Table of hardware sensors. | |
| dfl1660HWSensorEntry | 1.3.6.1.4.1.171.20.2.3.1.2.1.11.1 | not-accessible | Entry of table of hardware sensors. | |
| I32 dfl1660HWSensorIndex | 1.3.6.1.4.1.171.20.2.3.1.2.1.11.1.1 | Integer32 | not-accessible | Index of the entries of the sensor table. |
| STR dfl1660HWSensorName | 1.3.6.1.4.1.171.20.2.3.1.2.1.11.1.2 | DisplayString | read-only | The description of the sensor. |
| G32 dfl1660HWSensorValue | 1.3.6.1.4.1.171.20.2.3.1.2.1.11.1.3 | Gauge32 | read-only | The value of the sensor. |
| STR dfl1660HWSensorUnit | 1.3.6.1.4.1.171.20.2.3.1.2.1.11.1.4 | DisplayString | read-only | The description of the unit of the value mesured by sensor. |
| G32 dfl1660SysMemUsage | 1.3.6.1.4.1.171.20.2.3.1.2.1.12 | Gauge32 | read-only | The current memory usage. |
| dfl1660SysTCPUsage | 1.3.6.1.4.1.171.20.2.3.1.2.1.13 | |||
| G32 dfl1660SysTCPRecvSmall | 1.3.6.1.4.1.171.20.2.3.1.2.1.13.1 | Gauge32 | read-only | Small TCP receive windows usage. |
| G32 dfl1660SysTCPRecvLarge | 1.3.6.1.4.1.171.20.2.3.1.2.1.13.2 | Gauge32 | read-only | Large TCP receive windows usage. |
| G32 dfl1660SysTCPSendSmall | 1.3.6.1.4.1.171.20.2.3.1.2.1.13.3 | Gauge32 | read-only | Small TCP send windows usage. |
| G32 dfl1660SysTCPSendLarge | 1.3.6.1.4.1.171.20.2.3.1.2.1.13.4 | Gauge32 | read-only | Large TCP send windows usage. |
| G32 dfl1660SysTimerUsage | 1.3.6.1.4.1.171.20.2.3.1.2.1.14 | Gauge32 | read-only | The current number of timers in use. |
| G32 dfl1660SysConnOPS | 1.3.6.1.4.1.171.20.2.3.1.2.1.15 | Gauge32 | read-only | The number of connections opened per second. |
| G32 dfl1660SysConnCPS | 1.3.6.1.4.1.171.20.2.3.1.2.1.16 | Gauge32 | read-only | The number of connections closed per second. |
| C64 dfl1660SysHCForwardedBits | 1.3.6.1.4.1.171.20.2.3.1.2.1.17 | Counter64 | read-only | The number of bits forwarded through the gateway. |
| dfl1660VPN | 1.3.6.1.4.1.171.20.2.3.1.2.2 | |||
| dfl1660IPsec | 1.3.6.1.4.1.171.20.2.3.1.2.2.1 | |||
| dfl1660IPsecGlobal | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1 | |||
| G32 dfl1660IPsecPhaseOneActive | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.1 | Gauge32 | read-only | Number of Phase-1 active negotiations |
| G32 dfl1660IPsecPhaseOneAggrModeDone | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.2 | Gauge32 | read-only | Number of Phase-1 aggressive mode negotiations. |
| G32 dfl1660IPsecQuickModeActive | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.3 | Gauge32 | read-only | Number of quick mode active negotiations. |
| C32 dfl1660IPsecPhaseOneDone | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.4 | Counter32 | read-only | Number of Phase-1 negotiations done. |
| C32 dfl1660IPsecPhaseOneFailed | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.5 | Counter32 | read-only | Number of Phase-1 negotiations failed. |
| C32 dfl1660IPsecPhaseOneRekeyed | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.6 | Counter32 | read-only | Number of Phase-1 negotiations rekeyed. |
| C32 dfl1660IPsecQuickModeDone | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.7 | Counter32 | read-only | Number of quick mode negotiations done. |
| C32 dfl1660IPsecQuickModeFailed | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.8 | Counter32 | read-only | Number of quick mode negotiations failed. |
| C32 dfl1660IPsecInfoDone | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.9 | Counter32 | read-only | Number of informational exchanges done. (Not available in IKEv1 implementations) |
| C32 dfl1660IPsecInfoFailed | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.10 | Counter32 | read-only | Number of informational exchanges failed. (Not available in IKEv1 implementations) |
| C64 dfl1660IPsecInOctetsComp | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.11 | Counter64 | read-only | Total octets in before decompression. |
| C64 dfl1660IPsecInOctetsUncomp | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.12 | Counter64 | read-only | Total octets in after decompression. |
| C64 dfl1660IPsecOutOctetsComp | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.13 | Counter64 | read-only | Total octets out after compression. |
| C64 dfl1660IPsecOutOctetsUncomp | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.14 | Counter64 | read-only | Total octets out before compression. |
| C64 dfl1660IPsecForwardedOctetsComp | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.15 | Counter64 | read-only | Total octets forwarded after compression. |
| C64 dfl1660IPsecForwardedOctetsUcomp | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.16 | Counter64 | read-only | Total octets forwarded before compression. |
| C64 dfl1660IPsecInPackets | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.17 | Counter64 | read-only | Total packets in. |
| C64 dfl1660IPsecOutPackets | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.18 | Counter64 | read-only | Total packets Out. |
| C64 dfl1660IPsecForwardedPackets | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.19 | Counter64 | read-only | Total packets forwarded. |
| G32 dfl1660IPsecActiveTransforms | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.20 | Gauge32 | read-only | Number of currently active transforms. |
| C32 dfl1660IPsecTotalTransforms | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.21 | Counter32 | read-only | Total number of transform records created. |
| C32 dfl1660IPsecOutOfTransforms | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.22 | Counter32 | read-only | Number of packets dropped due to no available transform object. (Not available in IKEv1 implementations) |
| C32 dfl1660IPsecTotalRekeys | 1.3.6.1.4.1.171.20.2.3.1.2.2.1.1.23 | Counter32 | read-only | Total number of rekeys performed. |
| dfl1660Rules | 1.3.6.1.4.1.171.20.2.3.1.2.3 | |||
| dfl1660RuleUseTable | 1.3.6.1.4.1.171.20.2.3.1.2.3.2 | not-accessible | A list of general rules usage statistics. | |
| dfl1660RuleUseEntry | 1.3.6.1.4.1.171.20.2.3.1.2.3.2.1 | not-accessible | The statistics over a rule usage. | |
| I32 dfl1660RuleIndex | 1.3.6.1.4.1.171.20.2.3.1.2.3.2.1.1 | Integer32 | not-accessible | The rule usage index. |
| STR dfl1660RuleName | 1.3.6.1.4.1.171.20.2.3.1.2.3.2.1.2 | DisplayString | read-only | The name of the rule. |
| C32 dfl1660RuleUse | 1.3.6.1.4.1.171.20.2.3.1.2.3.2.1.3 | Counter32 | read-only | The number of times o rule was used. |
| dfl1660IPPools | 1.3.6.1.4.1.171.20.2.3.1.2.4 | |||
| I32 dfl1660IPPoolsNumber | 1.3.6.1.4.1.171.20.2.3.1.2.4.1 | Integer32 | read-only | The number of ip pools |
| dfl1660IPPoolTable | 1.3.6.1.4.1.171.20.2.3.1.2.4.2 | not-accessible | A list of IP pools | |
| dfl1660IPPoolEntry | 1.3.6.1.4.1.171.20.2.3.1.2.4.2.1 | not-accessible | The attributes of an ip pool | |
| I32 dfl1660IPPoolIndex | 1.3.6.1.4.1.171.20.2.3.1.2.4.2.1.1 | Integer32 | not-accessible | The ip pool index |
| STR dfl1660IPPoolName | 1.3.6.1.4.1.171.20.2.3.1.2.4.2.1.2 | DisplayString | read-only | The ip pool name |
| G32 dfl1660IPPoolPrepare | 1.3.6.1.4.1.171.20.2.3.1.2.4.2.1.3 | Gauge32 | read-only | Number of IP pool objects in prepare mode. |
| G32 dfl1660IPPoolFree | 1.3.6.1.4.1.171.20.2.3.1.2.4.2.1.4 | Gauge32 | read-only | Number of available IPs in the pool. |
| G32 dfl1660IPPoolMisses | 1.3.6.1.4.1.171.20.2.3.1.2.4.2.1.5 | Gauge32 | read-only | Mumber of missed IP pool negotiations for other reasons than lack of available IP numbers. |
| G32 dfl1660IPPoolClientFails | 1.3.6.1.4.1.171.20.2.3.1.2.4.2.1.6 | Gauge32 | read-only | Number of failed IP pool transactions. |
| G32 dfl1660IPPoolUsed | 1.3.6.1.4.1.171.20.2.3.1.2.4.2.1.7 | Gauge32 | read-only | Number of IP numbers in use from the pool. |
| dfl1660DHCPServer | 1.3.6.1.4.1.171.20.2.3.1.2.5 | |||
| G32 dfl1660DHCPTotalRejected | 1.3.6.1.4.1.171.20.2.3.1.2.5.1 | Gauge32 | read-only | Total number of rejected packets (all rules). |
| dfl1660DHCPRuleTable | 1.3.6.1.4.1.171.20.2.3.1.2.5.2 | not-accessible | A list of all DHCP server rules usage statistics. | |
| dfl1660DHCPRuleEntry | 1.3.6.1.4.1.171.20.2.3.1.2.5.2.1 | not-accessible | The attributes of a DHCP server rule statistics. | |
| I32 dfl1660DHCPRuleIndex | 1.3.6.1.4.1.171.20.2.3.1.2.5.2.1.1 | Integer32 | not-accessible | The DHCP server rule index |
| STR dfl1660DHCPRuleName | 1.3.6.1.4.1.171.20.2.3.1.2.5.2.1.2 | DisplayString | read-only | The DHCP server rule name. |
| G32 dfl1660DHCPRuleUsage | 1.3.6.1.4.1.171.20.2.3.1.2.5.2.1.3 | Gauge32 | read-only | Number of used IPs in the pool. |
| G32 dfl1660DHCPRuleUsagePercent | 1.3.6.1.4.1.171.20.2.3.1.2.5.2.1.4 | Gauge32 | read-only | The percentage of the used IPs in relation to the IP pool size. |
| G32 dfl1660DHCPActiveClients | 1.3.6.1.4.1.171.20.2.3.1.2.5.2.1.5 | Gauge32 | read-only | Number of currently active clients. |
| G32 dfl1660DHCPActiveClientsPercent | 1.3.6.1.4.1.171.20.2.3.1.2.5.2.1.6 | Gauge32 | read-only | The number of currently active clients as a percentage of the pool size. |
| G32 dfl1660DHCPRejectedRequests | 1.3.6.1.4.1.171.20.2.3.1.2.5.2.1.7 | Gauge32 | read-only | Number of rejected requests matching the current rule. |
| G32 dfl1660DHCPTotalLeases | 1.3.6.1.4.1.171.20.2.3.1.2.5.2.1.8 | Gauge32 | read-only | Total number of leases in the pool. |
| dfl1660UserAuth | 1.3.6.1.4.1.171.20.2.3.1.2.6 | |||
| G32 dfl1660UserAuthHTTPUsers | 1.3.6.1.4.1.171.20.2.3.1.2.6.1 | Gauge32 | read-only | Number of currently logged in HTTP users. |
| G32 dfl1660UserAuthXAUTHUsers | 1.3.6.1.4.1.171.20.2.3.1.2.6.2 | Gauge32 | read-only | Number of currently logged in XAUTH users. |
| G32 dfl1660UserAuthHTTPSUsers | 1.3.6.1.4.1.171.20.2.3.1.2.6.3 | Gauge32 | read-only | Number of currently logged in HTTPS users. |
| G32 dfl1660UserAuthPPPUsers | 1.3.6.1.4.1.171.20.2.3.1.2.6.4 | Gauge32 | read-only | Number of currently logged in PPP users. |
| G32 dfl1660UserAuthEAPUsers | 1.3.6.1.4.1.171.20.2.3.1.2.6.5 | Gauge32 | read-only | Number of currently logged in EAP users. |
| dfl1660UserAuthRuleUseTable | 1.3.6.1.4.1.171.20.2.3.1.2.6.6 | not-accessible | Table of user authentication rule usage. | |
| dfl1660UserAuthRuleUseEntry | 1.3.6.1.4.1.171.20.2.3.1.2.6.6.1 | not-accessible | The attributes of an authentication rule usage statistics. | |
| I32 dfl1660UserAuthRuleIndex | 1.3.6.1.4.1.171.20.2.3.1.2.6.6.1.1 | Integer32 | not-accessible | The rule usage index. |
| STR dfl1660UserAuthRuleName | 1.3.6.1.4.1.171.20.2.3.1.2.6.6.1.2 | DisplayString | read-only | The name of the rule. |
| C32 dfl1660UserAuthRuleUse | 1.3.6.1.4.1.171.20.2.3.1.2.6.6.1.3 | Counter32 | read-only | The number of times o rule was used. |
| dfl1660LinkMonitor | 1.3.6.1.4.1.171.20.2.3.1.2.7 | |||
| I32 dfl1660LinkMonGrp | 1.3.6.1.4.1.171.20.2.3.1.2.7.1 | Integer32 | read-only | The number of groups of monitored links |
| dfl1660LinkMonGrpTable | 1.3.6.1.4.1.171.20.2.3.1.2.7.2 | not-accessible | Table of link monitor groups. | |
| dfl1660LinkMonGrpEntry | 1.3.6.1.4.1.171.20.2.3.1.2.7.2.1 | not-accessible | The attributes of a link monitor group | |
| I32 dfl1660LinkMonGrpIndex | 1.3.6.1.4.1.171.20.2.3.1.2.7.2.1.1 | Integer32 | not-accessible | The index row in the table of link monitor groups. |
| STR dfl1660LinkMonGrpName | 1.3.6.1.4.1.171.20.2.3.1.2.7.2.1.2 | DisplayString | read-only | The link monitor group name. |
| G32 dfl1660LinkMonGrpHostsUp | 1.3.6.1.4.1.171.20.2.3.1.2.7.2.1.3 | Gauge32 | read-only | The percentage of monitored hosts available. |
| dfl1660LinkMonHostTable | 1.3.6.1.4.1.171.20.2.3.1.2.7.3 | not-accessible | Table of link monitored hosts in a link monnitor group. | |
| dfl1660LinkMonHostEntry | 1.3.6.1.4.1.171.20.2.3.1.2.7.3.1 | not-accessible | The attributes of a monitored host. | |
| I32 dfl1660LinkMonHostIndex | 1.3.6.1.4.1.171.20.2.3.1.2.7.3.1.1 | Integer32 | not-accessible | The index an host in the table of link monitor hosts. |
| STR dfl1660LinkMonHostId | 1.3.6.1.4.1.171.20.2.3.1.2.7.3.1.2 | DisplayString | read-only | The monitored host identifier. |
| G32 dfl1660LinkMonHostShortTermLoss | 1.3.6.1.4.1.171.20.2.3.1.2.7.3.1.3 | Gauge32 | read-only | The percentage of short term losst packets. |
| C32 dfl1660LinkMonHostPacketsLost | 1.3.6.1.4.1.171.20.2.3.1.2.7.3.1.4 | Counter32 | read-only | Total number of lost monitoring packets. |
| dfl1660Pipes | 1.3.6.1.4.1.171.20.2.3.1.2.8 | |||
| G32 dfl1660PipeUsers | 1.3.6.1.4.1.171.20.2.3.1.2.8.1 | Gauge32 | read-only | The current number of users, as defined by the grouping settings of each pipe, being tracked in the pipes system. Note that this value corresponds to the number of users active in each time slice of 1/20th of a second, and not to the number of users having open connections. |
| dfl1660PipeTable | 1.3.6.1.4.1.171.20.2.3.1.2.8.2 | not-accessible | Table of pipes | |
| dfl1660PipeEntry | 1.3.6.1.4.1.171.20.2.3.1.2.8.2.1 | not-accessible | A entry of the pipes table | |
| I32 dfl1660PipeIndex | 1.3.6.1.4.1.171.20.2.3.1.2.8.2.1.1 | Integer32 | not-accessible | The pipe index |
| STR dfl1660PipeName | 1.3.6.1.4.1.171.20.2.3.1.2.8.2.1.2 | DisplayString | read-only | The name of the pipe |
| I32 dfl1660PipeMinPrec | 1.3.6.1.4.1.171.20.2.3.1.2.8.2.1.3 | Integer32 | read-only | The minimum of the range of pipe precedences. |
| I32 dfl1660PipeMaxPrec | 1.3.6.1.4.1.171.20.2.3.1.2.8.2.1.4 | Integer32 | read-only | The maximum of the range of pipe precedences. |
| I32 dfl1660PipeDefPrec | 1.3.6.1.4.1.171.20.2.3.1.2.8.2.1.5 | Integer32 | read-only | The precedence assigned to a packet for which has not one allready done by a Pipe Rule. |
| I32 dfl1660PipeNumPrec | 1.3.6.1.4.1.171.20.2.3.1.2.8.2.1.6 | Integer32 | read-only | The number of pipe precedences |
| G32 dfl1660PipeNumUsers | 1.3.6.1.4.1.171.20.2.3.1.2.8.2.1.7 | Gauge32 | read-only | The current number of users, as defined by the grouping settings of each pipe, being tracked in the pipes system. This value corresponds to the number of users active in each time slice and not to the number of users having open connections. |
| G32 dfl1660PipeCurrentBps | 1.3.6.1.4.1.171.20.2.3.1.2.8.2.1.8 | Gauge32 | read-only | The current throughput of a pipe, in bits per second, as a sum of the corresponding values for all precedences. |
| G32 dfl1660PipeCurrentPps | 1.3.6.1.4.1.171.20.2.3.1.2.8.2.1.9 | Gauge32 | read-only | The current throughput of a pipe, in packets per second, as a sum of the corresponding values for all precedences. |
| C32 dfl1660PipeDelayedPackets | 1.3.6.1.4.1.171.20.2.3.1.2.8.2.1.10 | Counter32 | read-only | The number of times packets have been delayed as a result of a pipe, or pipe user having used up its allotted bandwidth. Note that one single packet may be delayed several times; if a pipe is really full, this count may exceed the number of packets actually passing through the pipe. |
| C32 dfl1660PipeDropedPackets | 1.3.6.1.4.1.171.20.2.3.1.2.8.2.1.11 | Counter32 | read-only | The number of packets dropped by a pipe. Packets are dropped when CorePlus is running out of packet buffers. This occurs when excessive amounts of packets need to be queued for later delivery. The packet dropped is always the one that has been queued the longest time globally, which means that the connection suffering from packet loss will be the one most overloading the system. |
| dfl1660PipePrecTable | 1.3.6.1.4.1.171.20.2.3.1.2.8.3 | not-accessible | There is a one to many relation between a pipe and its precedences. The number of precedences is a instance attribute of each pipe. This table extends the pipes table in order to express the relation between a pipe and the respective precedences. | |
| dfl1660PipePrecEntry | 1.3.6.1.4.1.171.20.2.3.1.2.8.3.1 | not-accessible | An entry of the table of pipe pecedences. These table entries are chracterized by been indexed by two values. The first index the same as the pipe index of the corresponding row in table of pipes and the second index is the index of the set of precedences of the corresponding pipe. | |
| I32 dfl1660PipePrecIndex | 1.3.6.1.4.1.171.20.2.3.1.2.8.3.1.1 | Integer32 | not-accessible | Index of a precedence of a specific pipe. This is the second index of the entries of pipe precedence table described by object dfl1660PipePrecEntry. |
| I32 dfl1660PipePrec | 1.3.6.1.4.1.171.20.2.3.1.2.8.3.1.2 | Integer32 | read-only | The precedence value |
| G32 dfl1660PipePrecBps | 1.3.6.1.4.1.171.20.2.3.1.2.8.3.1.3 | Gauge32 | read-only | The current throughput of the pipe, in bits per second, with the corresponding precedence. |
| G32 dfl1660PipePrecTotalPps | 1.3.6.1.4.1.171.20.2.3.1.2.8.3.1.4 | Gauge32 | read-only | The current throughput of the pipe precedence, in packets per second. |
| G32 dfl1660PipePrecReservedBps | 1.3.6.1.4.1.171.20.2.3.1.2.8.3.1.5 | Gauge32 | read-only | The current bandwidth allocated to the precedence. |
| G32 dfl1660PipePrecDynLimBps | 1.3.6.1.4.1.171.20.2.3.1.2.8.3.1.6 | Gauge32 | read-only | The current bandwidth limit limit applied the precedence. |
| G32 dfl1660PipePrecDynUsrLimBps | 1.3.6.1.4.1.171.20.2.3.1.2.8.3.1.7 | Gauge32 | read-only | The current precedence bandwidth limit per user of the pipe. |
| C32 dfl1660PipePrecDelayedPackets | 1.3.6.1.4.1.171.20.2.3.1.2.8.3.1.8 | Counter32 | read-only | The number of times packets have been delayed as a result of a precedence, or pipe user having used up its allotted bandwidth. Note that one single packet may be delayed several times; if a pipe is really full, this count may exceed the number of packets of this precedence actually passing through the pipe. |
| C32 dfl1660PipePrecDropedPackets | 1.3.6.1.4.1.171.20.2.3.1.2.8.3.1.9 | Counter32 | read-only | The number of pipe dropped packets with the corresponding precedence. |
| dfl1660ALG | 1.3.6.1.4.1.171.20.2.3.1.2.9 | |||
| G32 dfl1660AlgSessions | 1.3.6.1.4.1.171.20.2.3.1.2.9.1 | Gauge32 | read-only | Total ALG sessions |
| G32 dfl1660AlgConnections | 1.3.6.1.4.1.171.20.2.3.1.2.9.2 | Gauge32 | read-only | Total ALG connections |
| G32 dfl1660AlgTCPStreams | 1.3.6.1.4.1.171.20.2.3.1.2.9.3 | Gauge32 | read-only | Total ALG TCP streams |
| dfl1660HttpAlg | 1.3.6.1.4.1.171.20.2.3.1.2.9.4 | |||
| dfl1660HttpAlgTable | 1.3.6.1.4.1.171.20.2.3.1.2.9.4.1 | not-accessible | Table of HTTP ALG objects. | |
| dfl1660HttpAlgEntry | 1.3.6.1.4.1.171.20.2.3.1.2.9.4.1.1 | not-accessible | A row of the table of HTTP ALG objects. | |
| I32 dfl1660HttpAlgIndex | 1.3.6.1.4.1.171.20.2.3.1.2.9.4.1.1.1 | Integer32 | not-accessible | The index of an entry of the Table of HTTP ALG objects. |
| STR dfl1660HttpAlgName | 1.3.6.1.4.1.171.20.2.3.1.2.9.4.1.1.2 | DisplayString | read-only | The name of an HTTP ALG object. |
| G32 dfl1660HttpAlgTotalRequested | 1.3.6.1.4.1.171.20.2.3.1.2.9.4.1.1.3 | Gauge32 | read-only | Total number of URL requests. |
| G32 dfl1660HttpAlgTotalAllowed | 1.3.6.1.4.1.171.20.2.3.1.2.9.4.1.1.4 | Gauge32 | read-only | Total number of allowed URL requests. |
| G32 dfl1660HttpAlgTotalBlocked | 1.3.6.1.4.1.171.20.2.3.1.2.9.4.1.1.5 | Gauge32 | read-only | Total number of blocked URL requests. |
| dfl1660HttpAlgCntFltTable | 1.3.6.1.4.1.171.20.2.3.1.2.9.4.2 | not-accessible | Table of HTTP ALG content filtering rules. | |
| dfl1660HttpAlgCntFltEntry | 1.3.6.1.4.1.171.20.2.3.1.2.9.4.2.1 | not-accessible | Entry of the table of HTTP ALG content filtering rules. | |
| I32 dfl1660HttpAlgCntFltIndex | 1.3.6.1.4.1.171.20.2.3.1.2.9.4.2.1.1 | Integer32 | not-accessible | The index of an entry of the Table of HTTP ALG content filtering objects. |
| STR dfl1660HttpAlgCntFltName | 1.3.6.1.4.1.171.20.2.3.1.2.9.4.2.1.2 | DisplayString | read-only | The name of the a HTTP ALG content fitering. |
| G32 dfl1660HttpAlgCntFltRequests | 1.3.6.1.4.1.171.20.2.3.1.2.9.4.2.1.3 | Gauge32 | read-only | Total number of URLs intercepted by a content filtering object. |
| G32 dfl1660HttpAlgCntFltAllowed | 1.3.6.1.4.1.171.20.2.3.1.2.9.4.2.1.4 | Gauge32 | read-only | Total number of URLs intercepted and allowed by a content filtering object. |
| G32 dfl1660HttpAlgCntFltBlocked | 1.3.6.1.4.1.171.20.2.3.1.2.9.4.2.1.5 | Gauge32 | read-only | Total number of URLs intercepted and blocked by a content filtering object. |
| dfl1660SmtpAlg | 1.3.6.1.4.1.171.20.2.3.1.2.9.5 | |||
| dfl1660SmtpAlgTable | 1.3.6.1.4.1.171.20.2.3.1.2.9.5.1 | not-accessible | Table of SMTP ALG objects. | |
| dfl1660SmtpAlgEntry | 1.3.6.1.4.1.171.20.2.3.1.2.9.5.1.1 | not-accessible | A row of the table of SMTP ALG objects. | |
| I32 dfl1660SmtpAlgIndex | 1.3.6.1.4.1.171.20.2.3.1.2.9.5.1.1.1 | Integer32 | not-accessible | The index of an entry of the Table of SMTP ALG objects. |
| STR dfl1660SmtpAlgName | 1.3.6.1.4.1.171.20.2.3.1.2.9.5.1.1.2 | DisplayString | read-only | The name of an SMTP ALG object. |
| G32 dfl1660SmtpAlgTotCheckedSes | 1.3.6.1.4.1.171.20.2.3.1.2.9.5.1.1.3 | Gauge32 | read-only | Total sessions checked by the SMTP ALG of corresponding index. |
| G32 dfl1660SmtpAlgTotSpamSes | 1.3.6.1.4.1.171.20.2.3.1.2.9.5.1.1.4 | Gauge32 | read-only | Total spam sessions detected by the SMTP ALG of corresponding index. |
| G32 dfl1660SmtpAlgTotDroppedSes | 1.3.6.1.4.1.171.20.2.3.1.2.9.5.1.1.5 | Gauge32 | read-only | Total deroped sessions for the SMTP ALG of corresponding index. |
| dfl1660SmtpAlgDnsBlTable | 1.3.6.1.4.1.171.20.2.3.1.2.9.5.2 | not-accessible | Table of SMTP ALG DNS balck list objects. | |
| dfl1660SmtpAlgDnsBlEntry | 1.3.6.1.4.1.171.20.2.3.1.2.9.5.2.1 | not-accessible | A row of the table of SMTP ALG DNS black list objects. | |
| I32 dfl1660SmtpAlgDnsBlIndex | 1.3.6.1.4.1.171.20.2.3.1.2.9.5.2.1.1 | Integer32 | not-accessible | The index of an entry of the SMTP ALG DNS black list objects. |
| STR dfl1660SmtpAlgDnsBlName | 1.3.6.1.4.1.171.20.2.3.1.2.9.5.2.1.2 | DisplayString | read-only | The SMTP DNS black list name. |
| G32 dfl1660SmtpAlgDnsBlChecked | 1.3.6.1.4.1.171.20.2.3.1.2.9.5.2.1.3 | Gauge32 | read-only | Total sessions checked againt SMTP ALG DNS black list of corresponding index |
| G32 dfl1660SmtpAlgDnsBlMatched | 1.3.6.1.4.1.171.20.2.3.1.2.9.5.2.1.4 | Gauge32 | read-only | Total sessions that matched SMTP ALG DNS black list of corresponding index |
| G32 dfl1660SmtpAlgDnsBlFailChecks | 1.3.6.1.4.1.171.20.2.3.1.2.9.5.2.1.5 | Gauge32 | read-only | Total failed checks for the SMTP ALG DNS black list of corresponding index |
| dfl1660DHCPRelay | 1.3.6.1.4.1.171.20.2.3.1.2.11 | |||
| G32 dfl1660DHCPRelayCurClients | 1.3.6.1.4.1.171.20.2.3.1.2.11.1 | Gauge32 | read-only | Total DHCP relay active relayed clients. |
| G32 dfl1660DHCPRelayCurTrans | 1.3.6.1.4.1.171.20.2.3.1.2.11.2 | Gauge32 | read-only | Ongoing DHCP relay transactions. |
| G32 dfl1660DHCPRelayRejected | 1.3.6.1.4.1.171.20.2.3.1.2.11.3 | Gauge32 | read-only | Total DHCP relay packets rejected. |
| dfl1660DHCPRelayRuleTable | 1.3.6.1.4.1.171.20.2.3.1.2.11.4 | not-accessible | Table of DHCP relay rules. | |
| dfl1660DHCPRelayRuleEntry | 1.3.6.1.4.1.171.20.2.3.1.2.11.4.1 | not-accessible | Entry of the table of DHCP relay rules | |
| I32 dfl1660DHCPRelayRuleIndex | 1.3.6.1.4.1.171.20.2.3.1.2.11.4.1.1 | Integer32 | not-accessible | Index of the table of DHCP relay rules. |
| STR dfl1660DHCPRelayRuleName | 1.3.6.1.4.1.171.20.2.3.1.2.11.4.1.2 | DisplayString | read-only | Display name of a DHCP relay rule |
| G32 dfl1660DHCPRelayRuleHits | 1.3.6.1.4.1.171.20.2.3.1.2.11.4.1.3 | Gauge32 | read-only | Number of the times the DHCP relay rule with corresponding index was used. |
| G32 dfl1660DHCPRelayRuleCurClients | 1.3.6.1.4.1.171.20.2.3.1.2.11.4.1.4 | Gauge32 | read-only | Number of ctive relayed clients by the DHCP relay rule with corresponding index. |
| G32 dfl1660DHCPRelayRuleRejCliPkts | 1.3.6.1.4.1.171.20.2.3.1.2.11.4.1.5 | Gauge32 | read-only | Number of client packets rejected by a rule. |
| G32 dfl1660DHCPRelayRuleRejSrvPkts | 1.3.6.1.4.1.171.20.2.3.1.2.11.4.1.6 | Gauge32 | read-only | Number of DHCP server packets rejected by the DHCP relay rule with the corresponding index. |
| dfl1660HA | 1.3.6.1.4.1.171.20.2.3.1.2.12 | |||
| G32 dfl1660HASyncSendQueueLength | 1.3.6.1.4.1.171.20.2.3.1.2.12.1 | Gauge32 | read-only | Size of the queue used for the High Availability sync interface. |
| G32 dfl1660HASyncSendQueueUsagePkt | 1.3.6.1.4.1.171.20.2.3.1.2.12.2 | Gauge32 | read-only | High Availability Sync interface queue usage in number of packets. |
| G32 dfl1660HASyncSendQueueUsageOct | 1.3.6.1.4.1.171.20.2.3.1.2.12.3 | Gauge32 | read-only | High Availability Sync interface queue usage in number of octects. |
| C32 dfl1660HASyncSentPackets | 1.3.6.1.4.1.171.20.2.3.1.2.12.4 | Counter32 | read-only | Number High Availability packets sent on Sync. |
| C32 dfl1660HASyncSendResentPackets | 1.3.6.1.4.1.171.20.2.3.1.2.12.5 | Counter32 | read-only | Number of High Availability packets resent on Sync. |
| dfl1660reg | 1.3.6.1.4.1.171.20.2.3.2 | |||
| dfl1660MibModules | 1.3.6.1.4.1.171.20.2.3.2.1 | |||
| dfl1660_MIB | 1.3.6.1.4.1.171.20.2.3.2.1.2 | The MIB module for D-Link DFL-1660 series product. | ||
| dfl1660MibConfs | 1.3.6.1.4.1.171.20.2.3.2.2 | |||
| dfl1660StatsConformance | 1.3.6.1.4.1.171.20.2.3.2.2.1 | |||
| dfl1660StatsCompliance | 1.3.6.1.4.1.171.20.2.3.2.2.1.1 | Module Compliance | ||
| dfl1660MibObjectGroups | 1.3.6.1.4.1.171.20.2.3.2.3 | |||
| dfl1660StatsRegGroups | 1.3.6.1.4.1.171.20.2.3.2.3.1 | |||
| dfl1660SystemObjectGroup | 1.3.6.1.4.1.171.20.2.3.2.3.1.1 | System statistics Group | ||
| dfl1660IPsecObjectGroup | 1.3.6.1.4.1.171.20.2.3.2.3.1.2 | IPsec Group | ||
| dfl1660StateCountersGroup | 1.3.6.1.4.1.171.20.2.3.2.3.1.3 | Per state counters | ||
| dfl1660IPPoolGroup | 1.3.6.1.4.1.171.20.2.3.2.3.1.4 | IP pool entry objects group | ||
| dfl1660DHCPServerGroup | 1.3.6.1.4.1.171.20.2.3.2.3.1.5 | DHCP server rules objects. | ||
| dfl1660RuleUseGroup | 1.3.6.1.4.1.171.20.2.3.2.3.1.6 | Rule use objects. | ||
| dfl1660UserAuthGroup | 1.3.6.1.4.1.171.20.2.3.2.3.1.7 | User auth objects. | ||
| dfl1660IfStatsGroup | 1.3.6.1.4.1.171.20.2.3.2.3.1.8 | DFL-1660 interface statistics group. | ||
| dfl1660LinkMonitorGroup | 1.3.6.1.4.1.171.20.2.3.2.3.1.9 | DFL-1660 link monitor statistics group | ||
| dfl1660PipesObjectGroup | 1.3.6.1.4.1.171.20.2.3.2.3.1.10 | DFL-1660 pipes statistics group | ||
| dfl1660DHCPRelayObjectGroup | 1.3.6.1.4.1.171.20.2.3.2.3.1.12 | DFL-1660 DHCP relay statistics group | ||
| dfl1660AlgGroup | 1.3.6.1.4.1.171.20.2.3.2.3.1.13 | DFL-1660 HTTP ALG statistics group | ||
| dfl1660HAGroup | 1.3.6.1.4.1.171.20.2.3.2.3.1.14 | DFL-1660 HA statistics group | ||
| dfl1660IfVlanGroup | 1.3.6.1.4.1.171.20.2.3.2.3.1.15 | DFL-1660 VLAN statistics group | ||
| dfl1660SmtpAlgGroup | 1.3.6.1.4.1.171.20.2.3.2.3.1.16 | Clavister SMTP ALG objects group | ||
| dfl1660SysTCPGroup | 1.3.6.1.4.1.171.20.2.3.2.3.1.17 | DFL-1660 TCP buffer usage group |
RFC description
D-Link DFL-1660 series firewall system statistics, monitoring CPU load, memory, and connection metrics.
Start monitoring D-Link DFL-1660 firewall/UTM security appliance with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.