All MIBs › DFL2560-MIB
Organization: D-Link Corporation
Last Updated: 2010-09-02
Category: VPN and Security, Vendor: D-Link
Description: Manages D-Link DFL-2560 enterprise firewall security configuration and traffic monitoring.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is DFL2560-MIB?
DFL2560-MIB is a D-Link proprietary MIB for the DFL-2560 series enterprise unified threat management (UTM) firewall, covering system performance, connection tracking, and per-interface traffic statistics. It exposes performance counters such as CPU load, forwarded bits/packets, connection buffer usage, and protocol-specific state counters (TCP SYN/open/FIN, UDP, ICMP, and other packets), along with per-interface statistics in dfl2560IfStatsTable. Its central use is monitoring both hardware and software load on the firewall: dfl2560SysCpuLoad reveals processing strain, dfl2560SysConns and the TCP/UDP/ICMP state counters reveal connection-table pressure or potential DoS/flood activity, and buffer usage indicates whether the appliance is nearing capacity. It sits under D-Link's netdefendMgmt/utmFirewall enterprise branch and is largely self-contained, with no strong dependency on other standard MIBs evident from the object set. It is deployed at network edges or data center perimeters where the DFL-2560 firewall appliance provides UTM security services. Engineers can download the DFL2560-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in DFL2560-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- D-Link DFL-2560 UTM firewall appliance
Monitoring Examples
An administrator would poll dfl2560SysCpuLoad and dfl2560SysBuffUse together to detect whether the firewall is under CPU or memory/buffer pressure during high traffic periods. Watching dfl2560SysConns alongside dfl2560SysPscTcpSyn versus dfl2560SysPscTcpOpen can reveal a SYN-flood pattern if half-open connections spike disproportionately to fully established ones. Polling dfl2560IfStatsTable per interface shows forwarded packet/byte rates on each link, helping identify which interface is saturated when dfl2560SysForwardedBits climbs sharply.
What Can Be Monitored
- CPU load
- forwarded bits/packets
- connection buffer usage
- active connection count
- TCP SYN/open/FIN counters
- UDP/ICMP packet counters
- per-interface traffic statistics
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| enterprises |
From SNMPv2-TC
| DisplayString |
How to Use in IPNetwork Monitor
Example using dfl2560SysForwardedBits OID:
Select a D-Link DFL-2560 UTM firewall appliance as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type dfl2560SysForwardedBits into the Find box to locate it in the OID tree, then select it and click OK. The number of bits forwarded through the gateway. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| dlink | 1.3.6.1.4.1.171 | |||
| netdefendMgmt | 1.3.6.1.4.1.171.20 | |||
| utmFirewall | 1.3.6.1.4.1.171.20.2 | |||
| dfl2560 | 1.3.6.1.4.1.171.20.2.4 | |||
| dfl2560OS | 1.3.6.1.4.1.171.20.2.4.1 | |||
| dfl2560OSStats | 1.3.6.1.4.1.171.20.2.4.1.2 | |||
| dfl2560System | 1.3.6.1.4.1.171.20.2.4.1.2.1 | |||
| G32 dfl2560SysCpuLoad | 1.3.6.1.4.1.171.20.2.4.1.2.1.1 | Gauge32 | read-only | The system cpu load. |
| C32 dfl2560SysForwardedBitsEx | 1.3.6.1.4.1.171.20.2.4.1.2.1.2 | Counter32 | read-only | The number of bits forwarded through the gateway. |
| C32 dfl2560SysForwardedPackets | 1.3.6.1.4.1.171.20.2.4.1.2.1.3 | Counter32 | read-only | Total number of forwarded packets. |
| G32 dfl2560SysBuffUse | 1.3.6.1.4.1.171.20.2.4.1.2.1.4 | Gauge32 | read-only | The current number of buffers in use. |
| G32 dfl2560SysConns | 1.3.6.1.4.1.171.20.2.4.1.2.1.5 | Gauge32 | read-only | The numer of connections. |
| dfl2560SysPerStateCounters | 1.3.6.1.4.1.171.20.2.4.1.2.1.6 | |||
| G32 dfl2560SysPscTcpSyn | 1.3.6.1.4.1.171.20.2.4.1.2.1.6.1 | Gauge32 | read-only | Number of TCP connections in the SYN state. |
| G32 dfl2560SysPscTcpOpen | 1.3.6.1.4.1.171.20.2.4.1.2.1.6.2 | Gauge32 | read-only | Number of TCP connections in the OPEN state. |
| G32 dfl2560SysPscTcpFin | 1.3.6.1.4.1.171.20.2.4.1.2.1.6.3 | Gauge32 | read-only | Number of TCP connections in the FIN state. |
| G32 dfl2560SysPscUdp | 1.3.6.1.4.1.171.20.2.4.1.2.1.6.4 | Gauge32 | read-only | Number of UDP connections. |
| G32 dfl2560SysPscIcmp | 1.3.6.1.4.1.171.20.2.4.1.2.1.6.5 | Gauge32 | read-only | Number of ICMP connections. |
| G32 dfl2560SysPscOther | 1.3.6.1.4.1.171.20.2.4.1.2.1.6.6 | Gauge32 | read-only | Number of other connections. |
| dfl2560IfStatsTable | 1.3.6.1.4.1.171.20.2.4.1.2.1.7 | not-accessible | A table of DFL-2560 specific interfaces statistics | |
| dfl2560IfStatsEntry | 1.3.6.1.4.1.171.20.2.4.1.2.1.7.1 | not-accessible | The row in a table of DFL-2560 specific interface statistics | |
| I32 dfl2560IfStatsIndex | 1.3.6.1.4.1.171.20.2.4.1.2.1.7.1.1 | Integer32 | not-accessible | Index of a row in dfl2560SysIfStatsTable |
| STR dfl2560IfName | 1.3.6.1.4.1.171.20.2.4.1.2.1.7.1.2 | DisplayString | read-only | The name of the interface. |
| C32 dfl2560IfFragsIn | 1.3.6.1.4.1.171.20.2.4.1.2.1.7.1.3 | Counter32 | read-only | Number of IP packet fragments received in the interface. |
| C32 dfl2560IfFragReassOk | 1.3.6.1.4.1.171.20.2.4.1.2.1.7.1.4 | Counter32 | read-only | Number of complete IP packets successfully reassembled from the fragments received in the interface. |
| C32 dfl2560IfFragReassFail | 1.3.6.1.4.1.171.20.2.4.1.2.1.7.1.5 | Counter32 | read-only | Number of packets that could not be reassembled, either due to resource starvation, illegal fragmentation, or just packet loss. |
| C32 dfl2560IfPktsInCnt | 1.3.6.1.4.1.171.20.2.4.1.2.1.7.1.6 | Counter32 | read-only | Number of packets received by the interface. |
| C32 dfl2560IfPktsOutCnt | 1.3.6.1.4.1.171.20.2.4.1.2.1.7.1.7 | Counter32 | read-only | Number of packets sent by the interface |
| C32 dfl2560IfBitsInCnt | 1.3.6.1.4.1.171.20.2.4.1.2.1.7.1.8 | Counter32 | read-only | Number of bits received by the interface |
| C32 dfl2560IfBitsOutCnt | 1.3.6.1.4.1.171.20.2.4.1.2.1.7.1.9 | Counter32 | read-only | Number of bits sent by the interface |
| C32 dfl2560IfPktsTotCnt | 1.3.6.1.4.1.171.20.2.4.1.2.1.7.1.10 | Counter32 | read-only | Totat number of packets transmited by the interface |
| C32 dfl2560IfBitsTotCnt | 1.3.6.1.4.1.171.20.2.4.1.2.1.7.1.11 | Counter32 | read-only | Totat number of bits transmited by the interface |
| C64 dfl2560IfHCPktsInCnt | 1.3.6.1.4.1.171.20.2.4.1.2.1.7.1.12 | Counter64 | read-only | Number of packets received by the interface. This object is a 64-bit version of dfl2560IfPktsInCnt. |
| C64 dfl2560IfHCPktsOutCnt | 1.3.6.1.4.1.171.20.2.4.1.2.1.7.1.13 | Counter64 | read-only | Number of packets sent by the interface. This object is a 64-bit version of dfl2560IfPktsOutCnt. |
| C64 dfl2560IfHCBitsInCnt | 1.3.6.1.4.1.171.20.2.4.1.2.1.7.1.14 | Counter64 | read-only | Number of bits received by the interface. This object is a 64-bit version of dfl2560IfBitsInCnt. |
| C64 dfl2560IfHCBitsOutCnt | 1.3.6.1.4.1.171.20.2.4.1.2.1.7.1.15 | Counter64 | read-only | Number of bits sent by the interface. This object is a 64-bit version of dfl2560IfBitsOutCnt. |
| C64 dfl2560IfHCPktsTotCnt | 1.3.6.1.4.1.171.20.2.4.1.2.1.7.1.16 | Counter64 | read-only | Totat number of packets transmited by the interface. This object is a 64-bit version of dfl2560IfPktsTotCnt. |
| C64 dfl2560IfHCBitsTotCnt | 1.3.6.1.4.1.171.20.2.4.1.2.1.7.1.17 | Counter64 | read-only | Totat number of bits transmited by the interface. This object is a 64-bit version of dfl2560IfBitsTotCnt. |
| dfl2560IfRxRingTable | 1.3.6.1.4.1.171.20.2.4.1.2.1.8 | not-accessible | A table of DFL-2560 specific interface Rx ring statistics | |
| dfl2560IfRxRingEntry | 1.3.6.1.4.1.171.20.2.4.1.2.1.8.1 | not-accessible | The row in a table of DFL-2560 specific interface Rx ring statistics. | |
| I32 dfl2560IfRxRingIndex | 1.3.6.1.4.1.171.20.2.4.1.2.1.8.1.1 | Integer32 | not-accessible | Index of a row in dfl2560IfRxRingTable. |
| C32 dfl2560IfRxRingFifoErrors | 1.3.6.1.4.1.171.20.2.4.1.2.1.8.1.2 | Counter32 | read-only | Rx Ring number of FIFO errors. |
| G32 dfl2560IfRxDespools | 1.3.6.1.4.1.171.20.2.4.1.2.1.8.1.3 | Gauge32 | read-only | Number of despool events per second. |
| G32 dfl2560IfRxAvgUse | 1.3.6.1.4.1.171.20.2.4.1.2.1.8.1.4 | Gauge32 | read-only | Rx Ring average usage. |
| G32 dfl2560IfRxRingSaturation | 1.3.6.1.4.1.171.20.2.4.1.2.1.8.1.5 | Gauge32 | read-only | Rx Ring sturation. Percentage of ring use per despool event when the ring has been more than half full. |
| G32 dfl2560RxRingFlooded | 1.3.6.1.4.1.171.20.2.4.1.2.1.8.1.6 | Gauge32 | read-only | Rx Ring number of despool events for which the ring has been completely flooded |
| dfl2560IfTxRingTable | 1.3.6.1.4.1.171.20.2.4.1.2.1.9 | not-accessible | A table of DFL-2560 specific interface Tx ring statistics | |
| dfl2560IfTxRingEntry | 1.3.6.1.4.1.171.20.2.4.1.2.1.9.1 | not-accessible | The row in a table of DFL-2560 specific interface Tx ring statistics. | |
| I32 dfl2560IfTxRingIndex | 1.3.6.1.4.1.171.20.2.4.1.2.1.9.1.1 | Integer32 | not-accessible | Index of a row in dfl2560IfRxRingTable. |
| G32 dfl2560IfTxDespools | 1.3.6.1.4.1.171.20.2.4.1.2.1.9.1.2 | Gauge32 | read-only | Tx Ring number of despool event per second (polls when there is at least one buffer in the ring) |
| G32 dfl2560IfTxAvgUse | 1.3.6.1.4.1.171.20.2.4.1.2.1.9.1.3 | Gauge32 | read-only | Tx Ring number of despool events when the ring has been completely flooded |
| G32 dfl2560IfTxRingSaturation | 1.3.6.1.4.1.171.20.2.4.1.2.1.9.1.4 | Gauge32 | read-only | Tx Ring percentage of use per despool event when the ring has been more than half full. |
| G32 dfl2560RxTingFlooded | 1.3.6.1.4.1.171.20.2.4.1.2.1.9.1.5 | Gauge32 | read-only | Tx Ring number of despool events for in which the ring has been completely flooded |
| dfl2560IfVlanStatsTable | 1.3.6.1.4.1.171.20.2.4.1.2.1.10 | not-accessible | A table of DFL-2560 VLAN statistics | |
| dfl2560IfVlanStatsEntry | 1.3.6.1.4.1.171.20.2.4.1.2.1.10.1 | not-accessible | The row in a table of dfl2560IfVlanStatsTable. Each has an index equal to the ifIndex of the corresponding physical interface | |
| I32 dfl2560IfVlanIndex | 1.3.6.1.4.1.171.20.2.4.1.2.1.10.1.1 | Integer32 | not-accessible | Extended index of a row in dfl2560IfVlanStatsTable. |
| C32 dfl2560IfVlanUntaggedInPkts | 1.3.6.1.4.1.171.20.2.4.1.2.1.10.1.2 | Counter32 | read-only | Number of untaged packets untagged packets received by the interface. |
| C32 dfl2560IfVlanUntaggedOutPkts | 1.3.6.1.4.1.171.20.2.4.1.2.1.10.1.3 | Counter32 | read-only | Number of untagged packets sent by the interface. |
| C32 dfl2560IfVlanUntaggedTotPkts | 1.3.6.1.4.1.171.20.2.4.1.2.1.10.1.4 | Counter32 | read-only | Total number of untagged packets processed by the interface. |
| C32 dfl2560IfVlanUntaggedInOctets | 1.3.6.1.4.1.171.20.2.4.1.2.1.10.1.5 | Counter32 | read-only | Total number of octects in untagged packets received by the interface. |
| C32 dfl2560IfVlanUntaggedOutOctets | 1.3.6.1.4.1.171.20.2.4.1.2.1.10.1.6 | Counter32 | read-only | Total number of octects in untagged packets sent by the interface. |
| C32 dfl2560IfVlanUntaggedTotOctets | 1.3.6.1.4.1.171.20.2.4.1.2.1.10.1.7 | Counter32 | read-only | Total number of octects in untagged packets processed by the interface. |
| dfl2560HWSensorTable | 1.3.6.1.4.1.171.20.2.4.1.2.1.11 | not-accessible | Table of hardware sensors. | |
| dfl2560HWSensorEntry | 1.3.6.1.4.1.171.20.2.4.1.2.1.11.1 | not-accessible | Entry of table of hardware sensors. | |
| I32 dfl2560HWSensorIndex | 1.3.6.1.4.1.171.20.2.4.1.2.1.11.1.1 | Integer32 | not-accessible | Index of the entries of the sensor table. |
| STR dfl2560HWSensorName | 1.3.6.1.4.1.171.20.2.4.1.2.1.11.1.2 | DisplayString | read-only | The description of the sensor. |
| G32 dfl2560HWSensorValue | 1.3.6.1.4.1.171.20.2.4.1.2.1.11.1.3 | Gauge32 | read-only | The value of the sensor. |
| STR dfl2560HWSensorUnit | 1.3.6.1.4.1.171.20.2.4.1.2.1.11.1.4 | DisplayString | read-only | The description of the unit of the value mesured by sensor. |
| G32 dfl2560SysMemUsage | 1.3.6.1.4.1.171.20.2.4.1.2.1.12 | Gauge32 | read-only | The current memory usage. |
| dfl2560SysTCPUsage | 1.3.6.1.4.1.171.20.2.4.1.2.1.13 | |||
| G32 dfl2560SysTCPRecvSmall | 1.3.6.1.4.1.171.20.2.4.1.2.1.13.1 | Gauge32 | read-only | Small TCP receive windows usage. |
| G32 dfl2560SysTCPRecvLarge | 1.3.6.1.4.1.171.20.2.4.1.2.1.13.2 | Gauge32 | read-only | Large TCP receive windows usage. |
| G32 dfl2560SysTCPSendSmall | 1.3.6.1.4.1.171.20.2.4.1.2.1.13.3 | Gauge32 | read-only | Small TCP send windows usage. |
| G32 dfl2560SysTCPSendLarge | 1.3.6.1.4.1.171.20.2.4.1.2.1.13.4 | Gauge32 | read-only | Large TCP send windows usage. |
| G32 dfl2560SysTimerUsage | 1.3.6.1.4.1.171.20.2.4.1.2.1.14 | Gauge32 | read-only | The current number of timers in use. |
| G32 dfl2560SysConnOPS | 1.3.6.1.4.1.171.20.2.4.1.2.1.15 | Gauge32 | read-only | The number of connections opened per second. |
| G32 dfl2560SysConnCPS | 1.3.6.1.4.1.171.20.2.4.1.2.1.16 | Gauge32 | read-only | The number of connections closed per second. |
| C64 dfl2560SysHCForwardedBits | 1.3.6.1.4.1.171.20.2.4.1.2.1.17 | Counter64 | read-only | The number of bits forwarded through the gateway. |
| dfl2560VPN | 1.3.6.1.4.1.171.20.2.4.1.2.2 | |||
| dfl2560IPsec | 1.3.6.1.4.1.171.20.2.4.1.2.2.1 | |||
| dfl2560IPsecGlobal | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1 | |||
| G32 dfl2560IPsecPhaseOneActive | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.1 | Gauge32 | read-only | Number of Phase-1 active negotiations |
| G32 dfl2560IPsecPhaseOneAggrModeDone | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.2 | Gauge32 | read-only | Number of Phase-1 aggressive mode negotiations. |
| G32 dfl2560IPsecQuickModeActive | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.3 | Gauge32 | read-only | Number of quick mode active negotiations. |
| C32 dfl2560IPsecPhaseOneDone | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.4 | Counter32 | read-only | Number of Phase-1 negotiations done. |
| C32 dfl2560IPsecPhaseOneFailed | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.5 | Counter32 | read-only | Number of Phase-1 negotiations failed. |
| C32 dfl2560IPsecPhaseOneRekeyed | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.6 | Counter32 | read-only | Number of Phase-1 negotiations rekeyed. |
| C32 dfl2560IPsecQuickModeDone | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.7 | Counter32 | read-only | Number of quick mode negotiations done. |
| C32 dfl2560IPsecQuickModeFailed | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.8 | Counter32 | read-only | Number of quick mode negotiations failed. |
| C32 dfl2560IPsecInfoDone | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.9 | Counter32 | read-only | Number of informational exchanges done. (Not available in IKEv1 implementations) |
| C32 dfl2560IPsecInfoFailed | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.10 | Counter32 | read-only | Number of informational exchanges failed. (Not available in IKEv1 implementations) |
| C64 dfl2560IPsecInOctetsComp | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.11 | Counter64 | read-only | Total octets in before decompression. |
| C64 dfl2560IPsecInOctetsUncomp | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.12 | Counter64 | read-only | Total octets in after decompression. |
| C64 dfl2560IPsecOutOctetsComp | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.13 | Counter64 | read-only | Total octets out after compression. |
| C64 dfl2560IPsecOutOctetsUncomp | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.14 | Counter64 | read-only | Total octets out before compression. |
| C64 dfl2560IPsecForwardedOctetsComp | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.15 | Counter64 | read-only | Total octets forwarded after compression. |
| C64 dfl2560IPsecForwardedOctetsUcomp | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.16 | Counter64 | read-only | Total octets forwarded before compression. |
| C64 dfl2560IPsecInPackets | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.17 | Counter64 | read-only | Total packets in. |
| C64 dfl2560IPsecOutPackets | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.18 | Counter64 | read-only | Total packets Out. |
| C64 dfl2560IPsecForwardedPackets | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.19 | Counter64 | read-only | Total packets forwarded. |
| G32 dfl2560IPsecActiveTransforms | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.20 | Gauge32 | read-only | Number of currently active transforms. |
| C32 dfl2560IPsecTotalTransforms | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.21 | Counter32 | read-only | Total number of transform records created. |
| C32 dfl2560IPsecOutOfTransforms | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.22 | Counter32 | read-only | Number of packets dropped due to no available transform object. (Not available in IKEv1 implementations) |
| C32 dfl2560IPsecTotalRekeys | 1.3.6.1.4.1.171.20.2.4.1.2.2.1.1.23 | Counter32 | read-only | Total number of rekeys performed. |
| dfl2560Rules | 1.3.6.1.4.1.171.20.2.4.1.2.3 | |||
| dfl2560RuleUseTable | 1.3.6.1.4.1.171.20.2.4.1.2.3.2 | not-accessible | A list of general rules usage statistics. | |
| dfl2560RuleUseEntry | 1.3.6.1.4.1.171.20.2.4.1.2.3.2.1 | not-accessible | The statistics over a rule usage. | |
| I32 dfl2560RuleIndex | 1.3.6.1.4.1.171.20.2.4.1.2.3.2.1.1 | Integer32 | not-accessible | The rule usage index. |
| STR dfl2560RuleName | 1.3.6.1.4.1.171.20.2.4.1.2.3.2.1.2 | DisplayString | read-only | The name of the rule. |
| C32 dfl2560RuleUse | 1.3.6.1.4.1.171.20.2.4.1.2.3.2.1.3 | Counter32 | read-only | The number of times o rule was used. |
| dfl2560IPPools | 1.3.6.1.4.1.171.20.2.4.1.2.4 | |||
| I32 dfl2560IPPoolsNumber | 1.3.6.1.4.1.171.20.2.4.1.2.4.1 | Integer32 | read-only | The number of ip pools |
| dfl2560IPPoolTable | 1.3.6.1.4.1.171.20.2.4.1.2.4.2 | not-accessible | A list of IP pools | |
| dfl2560IPPoolEntry | 1.3.6.1.4.1.171.20.2.4.1.2.4.2.1 | not-accessible | The attributes of an ip pool | |
| I32 dfl2560IPPoolIndex | 1.3.6.1.4.1.171.20.2.4.1.2.4.2.1.1 | Integer32 | not-accessible | The ip pool index |
| STR dfl2560IPPoolName | 1.3.6.1.4.1.171.20.2.4.1.2.4.2.1.2 | DisplayString | read-only | The ip pool name |
| G32 dfl2560IPPoolPrepare | 1.3.6.1.4.1.171.20.2.4.1.2.4.2.1.3 | Gauge32 | read-only | Number of IP pool objects in prepare mode. |
| G32 dfl2560IPPoolFree | 1.3.6.1.4.1.171.20.2.4.1.2.4.2.1.4 | Gauge32 | read-only | Number of available IPs in the pool. |
| G32 dfl2560IPPoolMisses | 1.3.6.1.4.1.171.20.2.4.1.2.4.2.1.5 | Gauge32 | read-only | Mumber of missed IP pool negotiations for other reasons than lack of available IP numbers. |
| G32 dfl2560IPPoolClientFails | 1.3.6.1.4.1.171.20.2.4.1.2.4.2.1.6 | Gauge32 | read-only | Number of failed IP pool transactions. |
| G32 dfl2560IPPoolUsed | 1.3.6.1.4.1.171.20.2.4.1.2.4.2.1.7 | Gauge32 | read-only | Number of IP numbers in use from the pool. |
| dfl2560DHCPServer | 1.3.6.1.4.1.171.20.2.4.1.2.5 | |||
| G32 dfl2560DHCPTotalRejected | 1.3.6.1.4.1.171.20.2.4.1.2.5.1 | Gauge32 | read-only | Total number of rejected packets (all rules). |
| dfl2560DHCPRuleTable | 1.3.6.1.4.1.171.20.2.4.1.2.5.2 | not-accessible | A list of all DHCP server rules usage statistics. | |
| dfl2560DHCPRuleEntry | 1.3.6.1.4.1.171.20.2.4.1.2.5.2.1 | not-accessible | The attributes of a DHCP server rule statistics. | |
| I32 dfl2560DHCPRuleIndex | 1.3.6.1.4.1.171.20.2.4.1.2.5.2.1.1 | Integer32 | not-accessible | The DHCP server rule index |
| STR dfl2560DHCPRuleName | 1.3.6.1.4.1.171.20.2.4.1.2.5.2.1.2 | DisplayString | read-only | The DHCP server rule name. |
| G32 dfl2560DHCPRuleUsage | 1.3.6.1.4.1.171.20.2.4.1.2.5.2.1.3 | Gauge32 | read-only | Number of used IPs in the pool. |
| G32 dfl2560DHCPRuleUsagePercent | 1.3.6.1.4.1.171.20.2.4.1.2.5.2.1.4 | Gauge32 | read-only | The percentage of the used IPs in relation to the IP pool size. |
| G32 dfl2560DHCPActiveClients | 1.3.6.1.4.1.171.20.2.4.1.2.5.2.1.5 | Gauge32 | read-only | Number of currently active clients. |
| G32 dfl2560DHCPActiveClientsPercent | 1.3.6.1.4.1.171.20.2.4.1.2.5.2.1.6 | Gauge32 | read-only | The number of currently active clients as a percentage of the pool size. |
| G32 dfl2560DHCPRejectedRequests | 1.3.6.1.4.1.171.20.2.4.1.2.5.2.1.7 | Gauge32 | read-only | Number of rejected requests matching the current rule. |
| G32 dfl2560DHCPTotalLeases | 1.3.6.1.4.1.171.20.2.4.1.2.5.2.1.8 | Gauge32 | read-only | Total number of leases in the pool. |
| dfl2560UserAuth | 1.3.6.1.4.1.171.20.2.4.1.2.6 | |||
| G32 dfl2560UserAuthHTTPUsers | 1.3.6.1.4.1.171.20.2.4.1.2.6.1 | Gauge32 | read-only | Number of currently logged in HTTP users. |
| G32 dfl2560UserAuthXAUTHUsers | 1.3.6.1.4.1.171.20.2.4.1.2.6.2 | Gauge32 | read-only | Number of currently logged in XAUTH users. |
| G32 dfl2560UserAuthHTTPSUsers | 1.3.6.1.4.1.171.20.2.4.1.2.6.3 | Gauge32 | read-only | Number of currently logged in HTTPS users. |
| G32 dfl2560UserAuthPPPUsers | 1.3.6.1.4.1.171.20.2.4.1.2.6.4 | Gauge32 | read-only | Number of currently logged in PPP users. |
| G32 dfl2560UserAuthEAPUsers | 1.3.6.1.4.1.171.20.2.4.1.2.6.5 | Gauge32 | read-only | Number of currently logged in EAP users. |
| dfl2560UserAuthRuleUseTable | 1.3.6.1.4.1.171.20.2.4.1.2.6.6 | not-accessible | Table of user authentication rule usage. | |
| dfl2560UserAuthRuleUseEntry | 1.3.6.1.4.1.171.20.2.4.1.2.6.6.1 | not-accessible | The attributes of an authentication rule usage statistics. | |
| I32 dfl2560UserAuthRuleIndex | 1.3.6.1.4.1.171.20.2.4.1.2.6.6.1.1 | Integer32 | not-accessible | The rule usage index. |
| STR dfl2560UserAuthRuleName | 1.3.6.1.4.1.171.20.2.4.1.2.6.6.1.2 | DisplayString | read-only | The name of the rule. |
| C32 dfl2560UserAuthRuleUse | 1.3.6.1.4.1.171.20.2.4.1.2.6.6.1.3 | Counter32 | read-only | The number of times o rule was used. |
| dfl2560LinkMonitor | 1.3.6.1.4.1.171.20.2.4.1.2.7 | |||
| I32 dfl2560LinkMonGrp | 1.3.6.1.4.1.171.20.2.4.1.2.7.1 | Integer32 | read-only | The number of groups of monitored links |
| dfl2560LinkMonGrpTable | 1.3.6.1.4.1.171.20.2.4.1.2.7.2 | not-accessible | Table of link monitor groups. | |
| dfl2560LinkMonGrpEntry | 1.3.6.1.4.1.171.20.2.4.1.2.7.2.1 | not-accessible | The attributes of a link monitor group | |
| I32 dfl2560LinkMonGrpIndex | 1.3.6.1.4.1.171.20.2.4.1.2.7.2.1.1 | Integer32 | not-accessible | The index row in the table of link monitor groups. |
| STR dfl2560LinkMonGrpName | 1.3.6.1.4.1.171.20.2.4.1.2.7.2.1.2 | DisplayString | read-only | The link monitor group name. |
| G32 dfl2560LinkMonGrpHostsUp | 1.3.6.1.4.1.171.20.2.4.1.2.7.2.1.3 | Gauge32 | read-only | The percentage of monitored hosts available. |
| dfl2560LinkMonHostTable | 1.3.6.1.4.1.171.20.2.4.1.2.7.3 | not-accessible | Table of link monitored hosts in a link monnitor group. | |
| dfl2560LinkMonHostEntry | 1.3.6.1.4.1.171.20.2.4.1.2.7.3.1 | not-accessible | The attributes of a monitored host. | |
| I32 dfl2560LinkMonHostIndex | 1.3.6.1.4.1.171.20.2.4.1.2.7.3.1.1 | Integer32 | not-accessible | The index an host in the table of link monitor hosts. |
| STR dfl2560LinkMonHostId | 1.3.6.1.4.1.171.20.2.4.1.2.7.3.1.2 | DisplayString | read-only | The monitored host identifier. |
| G32 dfl2560LinkMonHostShortTermLoss | 1.3.6.1.4.1.171.20.2.4.1.2.7.3.1.3 | Gauge32 | read-only | The percentage of short term losst packets. |
| C32 dfl2560LinkMonHostPacketsLost | 1.3.6.1.4.1.171.20.2.4.1.2.7.3.1.4 | Counter32 | read-only | Total number of lost monitoring packets. |
| dfl2560Pipes | 1.3.6.1.4.1.171.20.2.4.1.2.8 | |||
| G32 dfl2560PipeUsers | 1.3.6.1.4.1.171.20.2.4.1.2.8.1 | Gauge32 | read-only | The current number of users, as defined by the grouping settings of each pipe, being tracked in the pipes system. Note that this value corresponds to the number of users active in each time slice of 1/20th of a second, and not to the number of users having open connections. |
| dfl2560PipeTable | 1.3.6.1.4.1.171.20.2.4.1.2.8.2 | not-accessible | Table of pipes | |
| dfl2560PipeEntry | 1.3.6.1.4.1.171.20.2.4.1.2.8.2.1 | not-accessible | A entry of the pipes table | |
| I32 dfl2560PipeIndex | 1.3.6.1.4.1.171.20.2.4.1.2.8.2.1.1 | Integer32 | not-accessible | The pipe index |
| STR dfl2560PipeName | 1.3.6.1.4.1.171.20.2.4.1.2.8.2.1.2 | DisplayString | read-only | The name of the pipe |
| I32 dfl2560PipeMinPrec | 1.3.6.1.4.1.171.20.2.4.1.2.8.2.1.3 | Integer32 | read-only | The minimum of the range of pipe precedences. |
| I32 dfl2560PipeMaxPrec | 1.3.6.1.4.1.171.20.2.4.1.2.8.2.1.4 | Integer32 | read-only | The maximum of the range of pipe precedences. |
| I32 dfl2560PipeDefPrec | 1.3.6.1.4.1.171.20.2.4.1.2.8.2.1.5 | Integer32 | read-only | The precedence assigned to a packet for which has not one allready done by a Pipe Rule. |
| I32 dfl2560PipeNumPrec | 1.3.6.1.4.1.171.20.2.4.1.2.8.2.1.6 | Integer32 | read-only | The number of pipe precedences |
| G32 dfl2560PipeNumUsers | 1.3.6.1.4.1.171.20.2.4.1.2.8.2.1.7 | Gauge32 | read-only | The current number of users, as defined by the grouping settings of each pipe, being tracked in the pipes system. This value corresponds to the number of users active in each time slice and not to the number of users having open connections. |
| G32 dfl2560PipeCurrentBps | 1.3.6.1.4.1.171.20.2.4.1.2.8.2.1.8 | Gauge32 | read-only | The current throughput of a pipe, in bits per second, as a sum of the corresponding values for all precedences. |
| G32 dfl2560PipeCurrentPps | 1.3.6.1.4.1.171.20.2.4.1.2.8.2.1.9 | Gauge32 | read-only | The current throughput of a pipe, in packets per second, as a sum of the corresponding values for all precedences. |
| C32 dfl2560PipeDelayedPackets | 1.3.6.1.4.1.171.20.2.4.1.2.8.2.1.10 | Counter32 | read-only | The number of times packets have been delayed as a result of a pipe, or pipe user having used up its allotted bandwidth. Note that one single packet may be delayed several times; if a pipe is really full, this count may exceed the number of packets actually passing through the pipe. |
| C32 dfl2560PipeDropedPackets | 1.3.6.1.4.1.171.20.2.4.1.2.8.2.1.11 | Counter32 | read-only | The number of packets dropped by a pipe. Packets are dropped when CorePlus is running out of packet buffers. This occurs when excessive amounts of packets need to be queued for later delivery. The packet dropped is always the one that has been queued the longest time globally, which means that the connection suffering from packet loss will be the one most overloading the system. |
| dfl2560PipePrecTable | 1.3.6.1.4.1.171.20.2.4.1.2.8.3 | not-accessible | There is a one to many relation between a pipe and its precedences. The number of precedences is a instance attribute of each pipe. This table extends the pipes table in order to express the relation between a pipe and the respective precedences. | |
| dfl2560PipePrecEntry | 1.3.6.1.4.1.171.20.2.4.1.2.8.3.1 | not-accessible | An entry of the table of pipe pecedences. These table entries are chracterized by been indexed by two values. The first index the same as the pipe index of the corresponding row in table of pipes and the second index is the index of the set of precedences of the corresponding pipe. | |
| I32 dfl2560PipePrecIndex | 1.3.6.1.4.1.171.20.2.4.1.2.8.3.1.1 | Integer32 | not-accessible | Index of a precedence of a specific pipe. This is the second index of the entries of pipe precedence table described by object dfl2560PipePrecEntry. |
| I32 dfl2560PipePrec | 1.3.6.1.4.1.171.20.2.4.1.2.8.3.1.2 | Integer32 | read-only | The precedence value |
| G32 dfl2560PipePrecBps | 1.3.6.1.4.1.171.20.2.4.1.2.8.3.1.3 | Gauge32 | read-only | The current throughput of the pipe, in bits per second, with the corresponding precedence. |
| G32 dfl2560PipePrecTotalPps | 1.3.6.1.4.1.171.20.2.4.1.2.8.3.1.4 | Gauge32 | read-only | The current throughput of the pipe precedence, in packets per second. |
| G32 dfl2560PipePrecReservedBps | 1.3.6.1.4.1.171.20.2.4.1.2.8.3.1.5 | Gauge32 | read-only | The current bandwidth allocated to the precedence. |
| G32 dfl2560PipePrecDynLimBps | 1.3.6.1.4.1.171.20.2.4.1.2.8.3.1.6 | Gauge32 | read-only | The current bandwidth limit limit applied the precedence. |
| G32 dfl2560PipePrecDynUsrLimBps | 1.3.6.1.4.1.171.20.2.4.1.2.8.3.1.7 | Gauge32 | read-only | The current precedence bandwidth limit per user of the pipe. |
| C32 dfl2560PipePrecDelayedPackets | 1.3.6.1.4.1.171.20.2.4.1.2.8.3.1.8 | Counter32 | read-only | The number of times packets have been delayed as a result of a precedence, or pipe user having used up its allotted bandwidth. Note that one single packet may be delayed several times; if a pipe is really full, this count may exceed the number of packets of this precedence actually passing through the pipe. |
| C32 dfl2560PipePrecDropedPackets | 1.3.6.1.4.1.171.20.2.4.1.2.8.3.1.9 | Counter32 | read-only | The number of pipe dropped packets with the corresponding precedence. |
| dfl2560ALG | 1.3.6.1.4.1.171.20.2.4.1.2.9 | |||
| G32 dfl2560AlgSessions | 1.3.6.1.4.1.171.20.2.4.1.2.9.1 | Gauge32 | read-only | Total ALG sessions |
| G32 dfl2560AlgConnections | 1.3.6.1.4.1.171.20.2.4.1.2.9.2 | Gauge32 | read-only | Total ALG connections |
| G32 dfl2560AlgTCPStreams | 1.3.6.1.4.1.171.20.2.4.1.2.9.3 | Gauge32 | read-only | Total ALG TCP streams |
| dfl2560HttpAlg | 1.3.6.1.4.1.171.20.2.4.1.2.9.4 | |||
| dfl2560HttpAlgTable | 1.3.6.1.4.1.171.20.2.4.1.2.9.4.1 | not-accessible | Table of HTTP ALG objects. | |
| dfl2560HttpAlgEntry | 1.3.6.1.4.1.171.20.2.4.1.2.9.4.1.1 | not-accessible | A row of the table of HTTP ALG objects. | |
| I32 dfl2560HttpAlgIndex | 1.3.6.1.4.1.171.20.2.4.1.2.9.4.1.1.1 | Integer32 | not-accessible | The index of an entry of the Table of HTTP ALG objects. |
| STR dfl2560HttpAlgName | 1.3.6.1.4.1.171.20.2.4.1.2.9.4.1.1.2 | DisplayString | read-only | The name of an HTTP ALG object. |
| G32 dfl2560HttpAlgTotalRequested | 1.3.6.1.4.1.171.20.2.4.1.2.9.4.1.1.3 | Gauge32 | read-only | Total number of URL requests. |
| G32 dfl2560HttpAlgTotalAllowed | 1.3.6.1.4.1.171.20.2.4.1.2.9.4.1.1.4 | Gauge32 | read-only | Total number of allowed URL requests. |
| G32 dfl2560HttpAlgTotalBlocked | 1.3.6.1.4.1.171.20.2.4.1.2.9.4.1.1.5 | Gauge32 | read-only | Total number of blocked URL requests. |
| dfl2560HttpAlgCntFltTable | 1.3.6.1.4.1.171.20.2.4.1.2.9.4.2 | not-accessible | Table of HTTP ALG content filtering rules. | |
| dfl2560HttpAlgCntFltEntry | 1.3.6.1.4.1.171.20.2.4.1.2.9.4.2.1 | not-accessible | Entry of the table of HTTP ALG content filtering rules. | |
| I32 dfl2560HttpAlgCntFltIndex | 1.3.6.1.4.1.171.20.2.4.1.2.9.4.2.1.1 | Integer32 | not-accessible | The index of an entry of the Table of HTTP ALG content filtering objects. |
| STR dfl2560HttpAlgCntFltName | 1.3.6.1.4.1.171.20.2.4.1.2.9.4.2.1.2 | DisplayString | read-only | The name of the a HTTP ALG content fitering. |
| G32 dfl2560HttpAlgCntFltRequests | 1.3.6.1.4.1.171.20.2.4.1.2.9.4.2.1.3 | Gauge32 | read-only | Total number of URLs intercepted by a content filtering object. |
| G32 dfl2560HttpAlgCntFltAllowed | 1.3.6.1.4.1.171.20.2.4.1.2.9.4.2.1.4 | Gauge32 | read-only | Total number of URLs intercepted and allowed by a content filtering object. |
| G32 dfl2560HttpAlgCntFltBlocked | 1.3.6.1.4.1.171.20.2.4.1.2.9.4.2.1.5 | Gauge32 | read-only | Total number of URLs intercepted and blocked by a content filtering object. |
| dfl2560SmtpAlg | 1.3.6.1.4.1.171.20.2.4.1.2.9.5 | |||
| dfl2560SmtpAlgTable | 1.3.6.1.4.1.171.20.2.4.1.2.9.5.1 | not-accessible | Table of SMTP ALG objects. | |
| dfl2560SmtpAlgEntry | 1.3.6.1.4.1.171.20.2.4.1.2.9.5.1.1 | not-accessible | A row of the table of SMTP ALG objects. | |
| I32 dfl2560SmtpAlgIndex | 1.3.6.1.4.1.171.20.2.4.1.2.9.5.1.1.1 | Integer32 | not-accessible | The index of an entry of the Table of SMTP ALG objects. |
| STR dfl2560SmtpAlgName | 1.3.6.1.4.1.171.20.2.4.1.2.9.5.1.1.2 | DisplayString | read-only | The name of an SMTP ALG object. |
| G32 dfl2560SmtpAlgTotCheckedSes | 1.3.6.1.4.1.171.20.2.4.1.2.9.5.1.1.3 | Gauge32 | read-only | Total sessions checked by the SMTP ALG of corresponding index. |
| G32 dfl2560SmtpAlgTotSpamSes | 1.3.6.1.4.1.171.20.2.4.1.2.9.5.1.1.4 | Gauge32 | read-only | Total spam sessions detected by the SMTP ALG of corresponding index. |
| G32 dfl2560SmtpAlgTotDroppedSes | 1.3.6.1.4.1.171.20.2.4.1.2.9.5.1.1.5 | Gauge32 | read-only | Total deroped sessions for the SMTP ALG of corresponding index. |
| dfl2560SmtpAlgDnsBlTable | 1.3.6.1.4.1.171.20.2.4.1.2.9.5.2 | not-accessible | Table of SMTP ALG DNS balck list objects. | |
| dfl2560SmtpAlgDnsBlEntry | 1.3.6.1.4.1.171.20.2.4.1.2.9.5.2.1 | not-accessible | A row of the table of SMTP ALG DNS black list objects. | |
| I32 dfl2560SmtpAlgDnsBlIndex | 1.3.6.1.4.1.171.20.2.4.1.2.9.5.2.1.1 | Integer32 | not-accessible | The index of an entry of the SMTP ALG DNS black list objects. |
| STR dfl2560SmtpAlgDnsBlName | 1.3.6.1.4.1.171.20.2.4.1.2.9.5.2.1.2 | DisplayString | read-only | The SMTP DNS black list name. |
| G32 dfl2560SmtpAlgDnsBlChecked | 1.3.6.1.4.1.171.20.2.4.1.2.9.5.2.1.3 | Gauge32 | read-only | Total sessions checked againt SMTP ALG DNS black list of corresponding index |
| G32 dfl2560SmtpAlgDnsBlMatched | 1.3.6.1.4.1.171.20.2.4.1.2.9.5.2.1.4 | Gauge32 | read-only | Total sessions that matched SMTP ALG DNS black list of corresponding index |
| G32 dfl2560SmtpAlgDnsBlFailChecks | 1.3.6.1.4.1.171.20.2.4.1.2.9.5.2.1.5 | Gauge32 | read-only | Total failed checks for the SMTP ALG DNS black list of corresponding index |
| dfl2560DHCPRelay | 1.3.6.1.4.1.171.20.2.4.1.2.11 | |||
| G32 dfl2560DHCPRelayCurClients | 1.3.6.1.4.1.171.20.2.4.1.2.11.1 | Gauge32 | read-only | Total DHCP relay active relayed clients. |
| G32 dfl2560DHCPRelayCurTrans | 1.3.6.1.4.1.171.20.2.4.1.2.11.2 | Gauge32 | read-only | Ongoing DHCP relay transactions. |
| G32 dfl2560DHCPRelayRejected | 1.3.6.1.4.1.171.20.2.4.1.2.11.3 | Gauge32 | read-only | Total DHCP relay packets rejected. |
| dfl2560DHCPRelayRuleTable | 1.3.6.1.4.1.171.20.2.4.1.2.11.4 | not-accessible | Table of DHCP relay rules. | |
| dfl2560DHCPRelayRuleEntry | 1.3.6.1.4.1.171.20.2.4.1.2.11.4.1 | not-accessible | Entry of the table of DHCP relay rules | |
| I32 dfl2560DHCPRelayRuleIndex | 1.3.6.1.4.1.171.20.2.4.1.2.11.4.1.1 | Integer32 | not-accessible | Index of the table of DHCP relay rules. |
| STR dfl2560DHCPRelayRuleName | 1.3.6.1.4.1.171.20.2.4.1.2.11.4.1.2 | DisplayString | read-only | Display name of a DHCP relay rule |
| G32 dfl2560DHCPRelayRuleHits | 1.3.6.1.4.1.171.20.2.4.1.2.11.4.1.3 | Gauge32 | read-only | Number of the times the DHCP relay rule with corresponding index was used. |
| G32 dfl2560DHCPRelayRuleCurClients | 1.3.6.1.4.1.171.20.2.4.1.2.11.4.1.4 | Gauge32 | read-only | Number of ctive relayed clients by the DHCP relay rule with corresponding index. |
| G32 dfl2560DHCPRelayRuleRejCliPkts | 1.3.6.1.4.1.171.20.2.4.1.2.11.4.1.5 | Gauge32 | read-only | Number of client packets rejected by a rule. |
| G32 dfl2560DHCPRelayRuleRejSrvPkts | 1.3.6.1.4.1.171.20.2.4.1.2.11.4.1.6 | Gauge32 | read-only | Number of DHCP server packets rejected by the DHCP relay rule with the corresponding index. |
| dfl2560HA | 1.3.6.1.4.1.171.20.2.4.1.2.12 | |||
| G32 dfl2560HASyncSendQueueLength | 1.3.6.1.4.1.171.20.2.4.1.2.12.1 | Gauge32 | read-only | Size of the queue used for the High Availability sync interface. |
| G32 dfl2560HASyncSendQueueUsagePkt | 1.3.6.1.4.1.171.20.2.4.1.2.12.2 | Gauge32 | read-only | High Availability Sync interface queue usage in number of packets. |
| G32 dfl2560HASyncSendQueueUsageOct | 1.3.6.1.4.1.171.20.2.4.1.2.12.3 | Gauge32 | read-only | High Availability Sync interface queue usage in number of octects. |
| C32 dfl2560HASyncSentPackets | 1.3.6.1.4.1.171.20.2.4.1.2.12.4 | Counter32 | read-only | Number High Availability packets sent on Sync. |
| C32 dfl2560HASyncSendResentPackets | 1.3.6.1.4.1.171.20.2.4.1.2.12.5 | Counter32 | read-only | Number of High Availability packets resent on Sync. |
| dfl2560reg | 1.3.6.1.4.1.171.20.2.4.2 | |||
| dfl2560MibModules | 1.3.6.1.4.1.171.20.2.4.2.1 | |||
| dfl2560_MIB | 1.3.6.1.4.1.171.20.2.4.2.1.2 | The MIB module for D-Link DFL-2560 series product. | ||
| dfl2560MibConfs | 1.3.6.1.4.1.171.20.2.4.2.2 | |||
| dfl2560StatsConformance | 1.3.6.1.4.1.171.20.2.4.2.2.1 | |||
| dfl2560StatsCompliance | 1.3.6.1.4.1.171.20.2.4.2.2.1.1 | Module Compliance | ||
| dfl2560MibObjectGroups | 1.3.6.1.4.1.171.20.2.4.2.3 | |||
| dfl2560StatsRegGroups | 1.3.6.1.4.1.171.20.2.4.2.3.1 | |||
| dfl2560SystemObjectGroup | 1.3.6.1.4.1.171.20.2.4.2.3.1.1 | System statistics Group | ||
| dfl2560IPsecObjectGroup | 1.3.6.1.4.1.171.20.2.4.2.3.1.2 | IPsec Group | ||
| dfl2560StateCountersGroup | 1.3.6.1.4.1.171.20.2.4.2.3.1.3 | Per state counters | ||
| dfl2560IPPoolGroup | 1.3.6.1.4.1.171.20.2.4.2.3.1.4 | IP pool entry objects group | ||
| dfl2560DHCPServerGroup | 1.3.6.1.4.1.171.20.2.4.2.3.1.5 | DHCP server rules objects. | ||
| dfl2560RuleUseGroup | 1.3.6.1.4.1.171.20.2.4.2.3.1.6 | Rule use objects. | ||
| dfl2560UserAuthGroup | 1.3.6.1.4.1.171.20.2.4.2.3.1.7 | User auth objects. | ||
| dfl2560IfStatsGroup | 1.3.6.1.4.1.171.20.2.4.2.3.1.8 | DFL-2560 interface statistics group. | ||
| dfl2560LinkMonitorGroup | 1.3.6.1.4.1.171.20.2.4.2.3.1.9 | DFL-2560 link monitor statistics group | ||
| dfl2560PipesObjectGroup | 1.3.6.1.4.1.171.20.2.4.2.3.1.10 | DFL-2560 pipes statistics group | ||
| dfl2560DHCPRelayObjectGroup | 1.3.6.1.4.1.171.20.2.4.2.3.1.12 | DFL-2560 DHCP relay statistics group | ||
| dfl2560AlgGroup | 1.3.6.1.4.1.171.20.2.4.2.3.1.13 | DFL-2560 HTTP ALG statistics group | ||
| dfl2560HAGroup | 1.3.6.1.4.1.171.20.2.4.2.3.1.14 | DFL-2560 HA statistics group | ||
| dfl2560IfVlanGroup | 1.3.6.1.4.1.171.20.2.4.2.3.1.15 | DFL-2560 VLAN statistics group | ||
| dfl2560SmtpAlgGroup | 1.3.6.1.4.1.171.20.2.4.2.3.1.16 | Clavister SMTP ALG objects group | ||
| dfl2560SysTCPGroup | 1.3.6.1.4.1.171.20.2.4.2.3.1.17 | DFL-2560 TCP buffer usage group |
RFC description
Vendor management MIB for D-Link DFL2560 series security appliances; manages firewall configuration, status, and security policies.
Start monitoring D-Link DFL-2560 UTM firewall appliance with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.