F10-FIPSNOOPING-MIB

All MIBs › F10-FIPSNOOPING-MIB

Organization: Dell Inc.

Last Updated: 2011-12-08

Category: VPN and Security, Vendor: Dell/DNOS

Description: Dell Force10 MIB for First-hop IP security snooping (DHCP snooping, ARP inspection) configuration and statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is F10-FIPSNOOPING-MIB?

F10-FIPSNOOPING-MIB is a Dell Force10 (Dell Networking OS) proprietary MIB configuring FIP (FCoE Initialization Protocol) Snooping per the T11 FCoE standard, and monitoring resulting FCoE sessions. Its objects cover a global admin mode, FC-MAP value, a stats-clear action, a per-VLAN configuration table (admin mode, FC-MAP, stats-clear), a per-interface table (FCF port-mode flag, stats-clear), and a session table (VLAN index, FCF/ENode MAC address, login type, FCoE MAC address, tentative index, FCID, ENode/FCF interface, session time/expiry time). As a configuration/status MIB it lets a SAN administrator confirm active FCoE sessions and their FCF/ENode binding on a Dell Force10 switch. It is deployed on Dell Force10 (Dell Networking OS) FCoE-capable switches. Engineers can download the F10-FIPSNOOPING-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in F10-FIPSNOOPING-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell Force10 (Dell Networking OS) FCoE-capable switches

Monitoring Examples

A SAN administrator checks dF10FIPSSessionTable to confirm an active FCoE session's FCF/ENode MAC binding and remaining session time on a Dell Force10 switch.

What Can Be Monitored

FIP snooping configuration and FCoE session status

Imported Objects

From FORCE10-SMI

f10Mgmt

OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From Q-BRIDGE-MIB

dot1qVlanIndex

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
MacAddress

How to Use in IPNetwork Monitor

Example using dF10FIPSVlanVlanRequests OID:

Select a Dell Force10 FCoE-capable switch (FIP Snooping) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type dF10FIPSVlanVlanRequests into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of VLAN Request messages received on the VLAN. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF dF10AclInstallationFailureTrap	1.3.6.1.4.1.6027.3.22.4.0.7			This trap is sent when there is a problem in installing the ACL entries due to no space or hardware failure
NTF dF10ENodeDroppedTrap	1.3.6.1.4.1.6027.3.22.4.0.5			This trap is sent when a new ENode discovered is dropped, as the maximum allowed ENodes limit in the system is already reached.
NTF dF10FcfDroppedTrap	1.3.6.1.4.1.6027.3.22.4.0.4			This trap is sent when a new FCF discovered (Discovery Advertisement is received from FCF) is dropped, as the maximum allowed FCFs limit in a VLAN is already reached.
INT dF10FIPSAdminMode	1.3.6.1.4.1.6027.3.22.1.1	INTEGER	read-write	This enables or disables FIP Snooping on the system.
dF10FIPSCfgGroup	1.3.6.1.4.1.6027.3.22.1
dF10FIPSCfgObjectGroup	1.3.6.1.4.1.6027.3.22.5.2.1			This group represents a collection of objects providing the FIPS system information.
U32 dF10FIPSENodeActiveSessions	1.3.6.1.4.1.6027.3.22.2.2.1.7	Unsigned32	read-only	Number of FCoE virtual connections successfully established by the ENode with FCFs.
U32 dF10FIPSENodeConnectedFCFsCount	1.3.6.1.4.1.6027.3.22.2.2.1.6	Unsigned32	read-only	Number of FCFs to which this ENode has FCoE virtual connections established.
dF10FIPSENodeEntry	1.3.6.1.4.1.6027.3.22.2.2.1		not-accessible	Represents an entry in FIP Snooping ENodes table.
U32 dF10FIPSENodeIntf	1.3.6.1.4.1.6027.3.22.2.2.1.3	Unsigned32	read-only	Interface to which the ENode is connected.
MAC dF10FIPSENodeMacAddr	1.3.6.1.4.1.6027.3.22.2.2.1.2	MacAddress	not-accessible	MAC address of the ENode.
U32 dF10FIPSENodeMaxFCoESize	1.3.6.1.4.1.6027.3.22.2.2.1.5	Unsigned32	read-only	Maximum FCoE PDU size the ENode MAC intends to use for FCoE traffic. This is equivalent to the maximum Ethernet frame payload the ENode intends to send.
OCT dF10FIPSENodeNameID	1.3.6.1.4.1.6027.3.22.2.2.1.4	OCTET STRING	read-only	Name ID of the ENode.
dF10FIPSENodeObjectGroup	1.3.6.1.4.1.6027.3.22.5.2.5			This group represents a collection of objects providing the FIPS ENode information.
U32 dF10FIPSENodeRejectedSessions	1.3.6.1.4.1.6027.3.22.2.2.1.9	Unsigned32	read-only	Number of virtual connections originted from ENode which are rejected by FCFs.
dF10FIPSENodeTable	1.3.6.1.4.1.6027.3.22.2.2		not-accessible	A table for FIP Snooping discovered ENode entries.
DAT dF10FIPSENodeTimeSinceDiscovered	1.3.6.1.4.1.6027.3.22.2.2.1.10	DateAndTime	read-only	Time elapsed since the ENode is discovered.
U32 dF10FIPSENodeVlanIndex	1.3.6.1.4.1.6027.3.22.2.2.1.1	Unsigned32	not-accessible	FCoE Vlan in which the enode is present.
U32 dF10FIPSENodeWaitingSessions	1.3.6.1.4.1.6027.3.22.2.2.1.8	Unsigned32	read-only	Number of FCoE virtual connections initiated by ENode and waiting for FCF acceptance.
INT dF10FIPSFCFAddressingMode	1.3.6.1.4.1.6027.3.22.2.3.1.6	INTEGER	read-only	Addressing mode(s) supported by the FCF.
I32 dF10FIPSFCFConfiguredFKA	1.3.6.1.4.1.6027.3.22.2.3.1.10	Integer32	read-only	FIP keepalive interval (FKA_ADV_PERIOD) in seconds configured on the FCF multiplied by five. For example, if the FKA_ADV period configured on the FCF is 80 seconds, the value of this field is 400 seconds.
U32 dF10FIPSFCFConnectedENodesCount	1.3.6.1.4.1.6027.3.22.2.3.1.12	Unsigned32	read-only	Number of ENodes to which FCF has FCoE virtual connections established.
I32 dF10FIPSFCFDbit	1.3.6.1.4.1.6027.3.22.2.3.1.8	Integer32	read-only	This reflects the value of D bit value provided by the most recently received Discovery Advertisement from the FCF.
dF10FIPSFCFEntry	1.3.6.1.4.1.6027.3.22.2.3.1		not-accessible	Represents an entry in FIP Snooping FCFs table.
U32 dF10FIPSFCFExpiryTime	1.3.6.1.4.1.6027.3.22.2.3.1.14	Unsigned32	read-only	This indicates the timer value in seconds to monitor the status of the FCF. FCF entry and all its associated virtual sessions will be removed when the value reaches 0. This value is reset to 'Configured FKA-ADV' every time a Discovery Advertisement is received from the FCF-MAC.
OCT dF10FIPSFCFFabricName	1.3.6.1.4.1.6027.3.22.2.3.1.5	OCTET STRING	read-only	Fabric Name identifying the Fabric.
U32 dF10FIPSFCFIntf	1.3.6.1.4.1.6027.3.22.2.3.1.3	Unsigned32	read-only	Inteface on which FCF is discovered.
I32 dF10FIPSFCFIsAvailableForLogin	1.3.6.1.4.1.6027.3.22.2.3.1.9	Integer32	read-only	This reflects the value of the A bit provided by the most recently received Discovery Advertisement from the FCF. This provides the information that the transmitting FCF is available for FIP FLOGI/FDISC from ENodes. This is informational and shall have no effect on existing logins.
MAC dF10FIPSFCFMacAddr	1.3.6.1.4.1.6027.3.22.2.3.1.2	MacAddress	not-accessible	MAC address of the FCF.
OCT dF10FIPSFCFNameID	1.3.6.1.4.1.6027.3.22.2.3.1.4	OCTET STRING	read-only	Name Identifer of the FCF.
dF10FIPSFCFObjectGroup	1.3.6.1.4.1.6027.3.22.5.2.6			This group represents a collection of objects providing the FIPS FCF information.
I32 dF10FIPSFCFPriority	1.3.6.1.4.1.6027.3.22.2.3.1.7	Integer32	read-only	This is the priority assigned to FCF. The highest priority value is 0 and the lowest priority value is 255.
U32 dF10FIPSFCFSessions	1.3.6.1.4.1.6027.3.22.2.3.1.13	Unsigned32	read-only	Total number of FCoE virtual connections successfully established by the ENodes with this FCF.
dF10FIPSFCFTable	1.3.6.1.4.1.6027.3.22.2.3		not-accessible	A table for FIP Snooping discovered FCF entries.
DAT dF10FIPSFCFTimeSinceDiscovered	1.3.6.1.4.1.6027.3.22.2.3.1.11	DateAndTime	read-only	Time elapsed since the FCF is discovered.
U32 dF10FIPSFCFVlanIndex	1.3.6.1.4.1.6027.3.22.2.3.1.1	Unsigned32	not-accessible	FCoE Vlan in which the FCF is present.
OCT dF10FIPSFCMAP	1.3.6.1.4.1.6027.3.22.1.2	OCTET STRING	read-write	This object configures the FC-MAP value on the system. Default value is 0x0EFC00.
MAC dF10FIPSFCoEMacAddr	1.3.6.1.4.1.6027.3.22.2.1.1.5	MacAddress	not-accessible	MAC address assigned to the VN_Port on the ENode.
C32 dF10FIPSIntfClearVirtLinks	1.3.6.1.4.1.6027.3.22.3.2.1.17	Counter32	read-only	Number of Clear Virtual Links messages received on the interface.
dF10FIPSIntfEntry	1.3.6.1.4.1.6027.3.22.1.4.1		not-accessible	FCF trust mode configuration for an interface.
C32 dF10FIPSIntfFcfDiscAdvTimeouts	1.3.6.1.4.1.6027.3.22.3.2.1.19	Counter32	read-only	Number of ACTIVE sessions timed out due to Discovery Advertisements timer expiry from FCFs on this interface.
C32 dF10FIPSIntfFDiscAccepts	1.3.6.1.4.1.6027.3.22.3.2.1.13	Counter32	read-only	Number of Fabric Discovery accept messages received on the interface.
C32 dF10FIPSIntfFDiscRejects	1.3.6.1.4.1.6027.3.22.3.2.1.14	Counter32	read-only	Number of Fabric Discovery reject messages received on the interface.
C32 dF10FIPSIntfFDiscs	1.3.6.1.4.1.6027.3.22.3.2.1.6	Counter32	read-only	Number of Fabric Discovery logins received on the interface.
C32 dF10FIPSIntfFLogiAccepts	1.3.6.1.4.1.6027.3.22.3.2.1.11	Counter32	read-only	Number of Fabric Login accept messages received on the interface.
C32 dF10FIPSIntfFLogiRejects	1.3.6.1.4.1.6027.3.22.3.2.1.12	Counter32	read-only	Number of Fabric Login reject messages received on the interface.
C32 dF10FIPSIntfFLogis	1.3.6.1.4.1.6027.3.22.3.2.1.5	Counter32	read-only	Number of Fabric Logins received on the interface.
C32 dF10FIPSIntfFLogoutAccepts	1.3.6.1.4.1.6027.3.22.3.2.1.15	Counter32	read-only	Number of Fabric Logout accept messages received on the interface.
C32 dF10FIPSIntfFLogoutRejects	1.3.6.1.4.1.6027.3.22.3.2.1.16	Counter32	read-only	Number of Fabric Logout reject messages received on the interface.
C32 dF10FIPSIntfFLogouts	1.3.6.1.4.1.6027.3.22.3.2.1.7	Counter32	read-only	Number of Fabric Logouts received on the interface.
C32 dF10FIPSIntfMCDiscAdverts	1.3.6.1.4.1.6027.3.22.3.2.1.9	Counter32	read-only	Number of Multicast Discovery Advertisement messages received on the interface.
C32 dF10FIPSIntfMCDiscSolicits	1.3.6.1.4.1.6027.3.22.3.2.1.3	Counter32	read-only	Number of Multicast Discovery Solicitation messages received on the interface.
dF10FIPSIntfObjectGroup	1.3.6.1.4.1.6027.3.22.5.2.3			This group represents a collection of objects providing the FIPS interface information.
INT dF10FIPSIntfPortModeFcf	1.3.6.1.4.1.6027.3.22.1.4.1.2	INTEGER	read-write	Sets/disables FCF port mode on an interface.
C32 dF10FIPSIntfSeshDenyENodeLmtRch	1.3.6.1.4.1.6027.3.22.3.2.1.22	Counter32	read-only	Number of sessions that are denied to be created on this interface form a new ENode/host as the number of ENodes/hosts count reached the maximum allowed limit in the system.
C32 dF10FIPSIntfSeshDenyFcfLmtRch	1.3.6.1.4.1.6027.3.22.3.2.1.21	Counter32	read-only	Number of sessions that are denied to be created on this interface form a new FCF as the number of FCFs count reached the maximum allowed limit in the system.
C32 dF10FIPSIntfSeshDenySysLmtRch	1.3.6.1.4.1.6027.3.22.3.2.1.23	Counter32	read-only	Number of sessions that are denied to be created as the number of sessions count reached the maximum allowed limit supported in the system. This is a global counter.
C32 dF10FIPSIntfSeshFailsDueToHwCfg	1.3.6.1.4.1.6027.3.22.3.2.1.20	Counter32	read-only	Number of sessions on this interface that failed while configuring the hardware.
INT dF10FIPSIntfStatsClear	1.3.6.1.4.1.6027.3.22.1.4.1.3	INTEGER	read-write	Clear FIP Snooping statistics on this interface. This is write-only value. It always returns '0' on request
dF10FIPSIntfStatsEntry	1.3.6.1.4.1.6027.3.22.3.2.1		not-accessible	FIP Snooping control traffic statistics on this interface.
dF10FIPSIntfStatsObjectGroup	1.3.6.1.4.1.6027.3.22.5.2.8			This group represents a collection of objects providing the FIPS Interface Statistics information.
dF10FIPSIntfStatsTable	1.3.6.1.4.1.6027.3.22.3.2		not-accessible	A table containing per-port, per-VLAN statistics for traffic received. Separate objects are provided for both the most-significant and least-significant bits of statistics counters for ports that are associated with this transparent bridge. The most-significant bit objects are only required on high capacity interfaces, as defined in the conformance clauses for these objects. This mechanism is provided as a way to read 64-bit counters for agents which support only SNMPv1. Note that the reporting of most-significant and least- significant counter bits separately runs the risk of missing an overflow of the lower bits in the interval between sampling. The manager must be aware of this possibility, even within the same varbindlist, when interpreting the results of a request or asynchronous notification.
dF10FIPSIntfTable	1.3.6.1.4.1.6027.3.22.1.4		not-accessible	A table providing configuration for trusted FCF interface mode.
C32 dF10FIPSIntfUnicastDiscAdverts	1.3.6.1.4.1.6027.3.22.3.2.1.10	Counter32	read-only	Number of Unicast Discovery Advertisement messages received on the interface.
C32 dF10FIPSIntfUnicastDiscSolicits	1.3.6.1.4.1.6027.3.22.3.2.1.4	Counter32	read-only	Number of Unicast Discovery Solicitation messages received on the interface.
C32 dF10FIPSIntfVlanNotifications	1.3.6.1.4.1.6027.3.22.3.2.1.2	Counter32	read-only	Number of VLAN Notification messages received on the interface.
C32 dF10FIPSIntfVlanRequests	1.3.6.1.4.1.6027.3.22.3.2.1.1	Counter32	read-only	Number of VLAN Request messages received on the interface.
C32 dF10FIPSIntfVnPortKeepAlives	1.3.6.1.4.1.6027.3.22.3.2.1.8	Counter32	read-only	Number of VN_Port keepalive messages received on the interface.
C32 dF10FIPSIntfVnPortSeshTimeouts	1.3.6.1.4.1.6027.3.22.3.2.1.18	Counter32	read-only	Number of Virtual sessions removed due to session timer expiry.
dF10FIPSMibCompliance	1.3.6.1.4.1.6027.3.22.5.1.1			The compliance statement for Dell Networking OS product which implement the Dell Networking OS FIP Snooping MIB.
dF10FIPSMibCompliances	1.3.6.1.4.1.6027.3.22.5.1
dF10FIPSMibConformance	1.3.6.1.4.1.6027.3.22.5
dF10FIPSMibGroups	1.3.6.1.4.1.6027.3.22.5.2
dF10FipSnooping	1.3.6.1.4.1.6027.3.22			The Dell Networking OS Private MIB for FIP Snooping feature. This MIB module is for configuring FIP snooping related objects and monitoring related FCoE sessions. Terminologies used in this MIB are defined by the T11 FCoE standard. Refer to www.t11.org. This MIB also supports configuration of the following objects: - Port role configuration to identify FCF facing or FCF connected interface - FC-MAP value used by the FCF operating in FPMA mode
dF10FIPSNotifications	1.3.6.1.4.1.6027.3.22.4
U32 dF10FIPSSessionENodeIntf	1.3.6.1.4.1.6027.3.22.2.1.1.8	Unsigned32	read-only	Interface to which the ENode is connected.
MAC dF10FIPSSessionENodeMacAddr	1.3.6.1.4.1.6027.3.22.2.1.1.3	MacAddress	not-accessible	MAC address of the ENode from which the session originated.
dF10FIPSSessionEntry	1.3.6.1.4.1.6027.3.22.2.1.1		not-accessible	Represents an entry in FIP Snooping session table.
I32 dF10FIPSSessionExpiryTime	1.3.6.1.4.1.6027.3.22.2.1.1.11	Integer32	read-only	This is virtual connection/session expiry interval. This is used to monitor the status of the session. Session entry is removed when the value reaches 0. This value is reset to 450 secs (5*90secs) every time an associated VN_Port FKA is received from the ENode. This is ignored (marked as NA) if the D-bit is set to one in the FCF Discovery Advertisements.
U32 dF10FIPSSessionFCFIntf	1.3.6.1.4.1.6027.3.22.2.1.1.9	Unsigned32	read-only	Interface on which the FCF is discovered.
MAC dF10FIPSSessionFCFMacAddr	1.3.6.1.4.1.6027.3.22.2.1.1.2	MacAddress	not-accessible	MAC address of the FCF to which the session is established.
OCT dF10FIPSSessionFCID	1.3.6.1.4.1.6027.3.22.2.1.1.7	OCTET STRING	not-accessible	FCID created by FCF for this virtual session.
INT dF10FIPSSessionLoginType	1.3.6.1.4.1.6027.3.22.2.1.1.4	INTEGER	not-accessible	Type of login requested by ENode.
dF10FIPSSessionObjectGroup	1.3.6.1.4.1.6027.3.22.5.2.4			This group represents a collection of objects providing the FIPS Session information.
OCT dF10FIPSSessionState	1.3.6.1.4.1.6027.3.22.2.1.1.12	OCTET STRING	read-only	This is the state of the virtual session. The state is displayed as TENTATIVE during the process of ENode login to FCF (using FLOGI or FDESC). It displays ACTIVE after ENode and FCF establish a successful virtual connection.
dF10FIPSSessionTable	1.3.6.1.4.1.6027.3.22.2.1		not-accessible	A table for FIP Snooping Session entries.
U32 dF10FIPSSessionTentativeIndex	1.3.6.1.4.1.6027.3.22.2.1.1.6	Unsigned32	not-accessible	Index to the tentavtive session.
DAT dF10FIPSSessionTime	1.3.6.1.4.1.6027.3.22.2.1.1.10	DateAndTime	read-only	Time elapsed after this successful virtual session is established by ENode with FCF.
U32 dF10FIPSSessionVlanIndex	1.3.6.1.4.1.6027.3.22.2.1.1.1	Unsigned32	not-accessible	FCoE Vlan in which the session is established.
dF10FIPSStatisticsGroup	1.3.6.1.4.1.6027.3.22.3
INT dF10FIPSStatsClear	1.3.6.1.4.1.6027.3.22.1.5	INTEGER	read-write	Clear all FIP Snooping statistics in the system. This is write-only value. It always returns '0' on request.
dF10FIPSStatusGroup	1.3.6.1.4.1.6027.3.22.2
MAC dF10FIPSTrapMacAddr	1.3.6.1.4.1.6027.3.22.4.1.2	MacAddress	accessible-for-notify	This object refers to the FCF or Enode MAC Address for which the FIP Snooping trap is being sent.
dF10FIPSTrapObjects	1.3.6.1.4.1.6027.3.22.4.1
dF10FIPSTrapObjectsGroup	1.3.6.1.4.1.6027.3.22.5.2.10			This group represents a collection of objects providing the FIPS Trap object information.
dF10FIPSTraps	1.3.6.1.4.1.6027.3.22.4.0
dF10FIPSTrapsObjectGroup	1.3.6.1.4.1.6027.3.22.5.2.9			This group represents a collection of objects providing the FIPS Trap information.
U32 dF10FIPSTrapVlanIndex	1.3.6.1.4.1.6027.3.22.4.1.1	Unsigned32	accessible-for-notify	This object refers to the Vlan Index for which the FIP Snooping trap is being sent.
INT dF10FIPSVlanAdminMode	1.3.6.1.4.1.6027.3.22.1.3.1.1	INTEGER	read-write	This enables or disables FIP Snooping on a selected Vlan interface.
dF10FIPSVlanCfgEntry	1.3.6.1.4.1.6027.3.22.1.3.1		not-accessible	Represents entry for a FIP Snooping Vlan.
dF10FIPSVlanCfgObjectGroup	1.3.6.1.4.1.6027.3.22.5.2.2			This group represents a collection of objects providing the FIPS vlan information.
dF10FIPSVlanCfgTable	1.3.6.1.4.1.6027.3.22.1.3		not-accessible	A table of the FIP Snooping Vlan configuration entries.
C32 dF10FIPSVlanClearVirtLinks	1.3.6.1.4.1.6027.3.22.3.1.1.17	Counter32	read-only	Number of Clear Virtual Link request packets snooped in the VLAN.
C32 dF10FIPSVlanFcfDiscAdvTimeouts	1.3.6.1.4.1.6027.3.22.3.1.1.19	Counter32	read-only	Number of ACTIVE sessions timed out due to Discovery Advertisements timer expiry from FCFs in the VLAN.
OCT dF10FIPSVlanFCMAP	1.3.6.1.4.1.6027.3.22.1.3.1.2	OCTET STRING	read-write	This object configures the FC-MAP value associated with the FIP snooping Vlan. Default value is 0x0EFC00.
C32 dF10FIPSVlanFDiscAccepts	1.3.6.1.4.1.6027.3.22.3.1.1.13	Counter32	read-only	Number of Fabric Discovery accept packets snooped in the VLAN.
C32 dF10FIPSVlanFDiscRejects	1.3.6.1.4.1.6027.3.22.3.1.1.14	Counter32	read-only	Number of Fabric Discovery reject packets snooped in the VLAN.
C32 dF10FIPSVlanFDiscs	1.3.6.1.4.1.6027.3.22.3.1.1.6	Counter32	read-only	Number of Fabric Discovery Login messages snooped in the VLAN.
C32 dF10FIPSVlanFLogiAccepts	1.3.6.1.4.1.6027.3.22.3.1.1.11	Counter32	read-only	Number of Fabric Login accept packets snooped in the VLAN.
C32 dF10FIPSVlanFLogiRejects	1.3.6.1.4.1.6027.3.22.3.1.1.12	Counter32	read-only	Number of Fabric Login reject packets snooped in the VLAN.
C32 dF10FIPSVlanFLogis	1.3.6.1.4.1.6027.3.22.3.1.1.5	Counter32	read-only	Number of Fabric Login messages snooped in the VLAN.
C32 dF10FIPSVlanFLogoutAccepts	1.3.6.1.4.1.6027.3.22.3.1.1.15	Counter32	read-only	Number of Fabric Logouts accept packets snooped in the VLAN.
C32 dF10FIPSVlanFLogoutRejects	1.3.6.1.4.1.6027.3.22.3.1.1.16	Counter32	read-only	Number of Fabric Logouts reject packets snooped in the VLAN.
C32 dF10FIPSVlanFLogouts	1.3.6.1.4.1.6027.3.22.3.1.1.7	Counter32	read-only	Number of Fabric Logout messages snooped in the VLAN.
C32 dF10FIPSVlanMCDiscAdverts	1.3.6.1.4.1.6027.3.22.3.1.1.9	Counter32	read-only	Number of Multicast Discovery Advertisement messages snooped in the VLAN.
C32 dF10FIPSVlanMCDiscSolicits	1.3.6.1.4.1.6027.3.22.3.1.1.3	Counter32	read-only	Number of Multicast Discovery Solicitation messages snooped in the VLAN.
C32 dF10FIPSVlanSeshDenyENodeLmtRch	1.3.6.1.4.1.6027.3.22.3.1.1.22	Counter32	read-only	Number of sessions that are denied to be created for the new ENode as the number of ENodes reached the maximum allowed limit supported by the system.
C32 dF10FIPSVlanSeshDenyFcfLmtRch	1.3.6.1.4.1.6027.3.22.3.1.1.21	Counter32	read-only	Number of sessions that are denied to be created for the new FCF as the number of FCFs reached the maximum allowed limit supported in the VLAN.
C32 dF10FIPSVlanSeshDenySysLmtRch	1.3.6.1.4.1.6027.3.22.3.1.1.23	Counter32	read-only	Number of session create requests denied as the number of sessions reached the maximum allowed limit supported by the system.
C32 dF10FIPSVlanSeshFailsDueToHwCfg	1.3.6.1.4.1.6027.3.22.3.1.1.20	Counter32	read-only	Number of sessions in the VLAN that failed while configuring the hardware.
INT dF10FIPSVlanStatsClear	1.3.6.1.4.1.6027.3.22.1.3.1.3	INTEGER	read-write	Clear FIP Snooping statistics on this Vlan. This is write-only value. It always returns '0' on request
dF10FIPSVlanStatsEntry	1.3.6.1.4.1.6027.3.22.3.1.1		not-accessible	FIP Snooping control traffic statistics of a VLAN.
dF10FIPSVlanStatsObjectGroup	1.3.6.1.4.1.6027.3.22.5.2.7			This group represents a collection of objects providing the FIPS Vlan Statistics information.
dF10FIPSVlanStatsTable	1.3.6.1.4.1.6027.3.22.3.1		not-accessible	A table containing per-port, per-VLAN statistics for traffic received. Separate objects are provided for both the most-significant and least-significant bits of statistics counters for ports that are associated with this transparent bridge. The most-significant bit objects are only required on high capacity interfaces, as defined in the conformance clauses for these objects. This mechanism is provided as a way to read 64-bit counters for agents which support only SNMPv1. Note that the reporting of most-significant and least- significant counter bits separately runs the risk of missing an overflow of the lower bits in the interval between sampling. The manager must be aware of this possibility, even within the same varbindlist, when interpreting the results of a request or asynchronous notification.
C32 dF10FIPSVlanUnicastDiscAdverts	1.3.6.1.4.1.6027.3.22.3.1.1.10	Counter32	read-only	Number of Unicast Discovery Advertisement packets snooped in the VLAN.
C32 dF10FIPSVlanUnicastDiscSolicits	1.3.6.1.4.1.6027.3.22.3.1.1.4	Counter32	read-only	Number of Unicast Discovery Solicitation messages snooped in the VLAN.
C32 dF10FIPSVlanVlanNotifications	1.3.6.1.4.1.6027.3.22.3.1.1.2	Counter32	read-only	Number of VLAN Notification messages received on the VLAN.
C32 dF10FIPSVlanVlanRequestsEx	1.3.6.1.4.1.6027.3.22.3.1.1.1	Counter32	read-only	Number of VLAN Request messages received on the VLAN.
C32 dF10FIPSVlanVnPortKeepAlives	1.3.6.1.4.1.6027.3.22.3.1.1.8	Counter32	read-only	Number of VN_Port keep alive messages snooped in the VLAN.
C32 dF10FIPSVlanVnPortSeshTimeouts	1.3.6.1.4.1.6027.3.22.3.1.1.18	Counter32	read-only	Number of virtual sessions removed due to session timer expiry in the VLAN.
NTF dF10MaxENodesLmtRchTrap	1.3.6.1.4.1.6027.3.22.4.0.2			This trap is sent when number of ENodes reached maximum allowed limit in the system.
NTF dF10MaxFcfsInVlanLmtRchTrap	1.3.6.1.4.1.6027.3.22.4.0.1			This trap is sent when number of FCFs reached maximum allowed limit in VLAN.
NTF dF10MaxSessionLmtRchTrap	1.3.6.1.4.1.6027.3.22.4.0.3			This trap is sent when number of sessions reached maximum allowed limit in the system.
NTF dF10SessionRequestDroppedTrap	1.3.6.1.4.1.6027.3.22.4.0.6			This trap is sent when a new session request received is dropped, as the maximum allowed session limit in system is already reached.

RFC description

Dell Networking FIP snooping MIB for Fibre Channel over Ethernet (FCoE) management, FCF port roles, and FC-MAP configuration.

Start monitoring Dell Force10 FCoE-capable switch (FIP Snooping) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download F10-FIPSNOOPING-MIB