All MIBs › A3COM-HUAWEI-DVPN-MIB
Organization: Huawei 3Com Technologies Co., Ltd.
Last Updated: 2005-07-01
Category: VPN and Security, Vendor: H3C/HH3C
Description: Manages H3C Dynamic VPN tunnel negotiation, session state, and traffic statistics for DVPN deployments.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is A3COM-HUAWEI-DVPN-MIB?
A3COM-HUAWEI-DVPN-MIB manages H3C's Dynamic Virtual Private Network (DVPN) feature, a proprietary tunnel-negotiation protocol for routers that allows on-demand VPN tunnel establishment between spoke routers without a static full-mesh configuration, as its module_desc states it is applicable to router devices. It is expected to expose tunnel negotiation/session state and per-tunnel traffic statistics for dynamically built VPN tunnels. Monitoring focuses on the DVPN software/protocol's health rather than physical hardware: tunnel up/down state and traffic counters reveal whether dynamic tunnels are being negotiated correctly and carrying traffic. Dependency: this is a proprietary H3C protocol rather than an implementation of a specific IETF VPN standard, though it may interact with underlying IPsec/GRE tunneling MIBs. Deployment is explicitly router-based, typically branch-office WAN interconnect scenarios building dynamic hub-and-spoke or full-mesh tunnel networks, where A3COM-HUAWEI-DVPN-MIB SNMP monitoring confirms tunnels are negotiated and carrying traffic as expected.
IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-DVPN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- H3C/3Com routers
Monitoring Examples
No specific table or object names were available in the sampled source for this module, so a concrete OID-level polling example is not given here to avoid inventing identifiers. In practice an operator would monitor per-tunnel negotiation/session state and traffic byte/packet counters to confirm dynamic spoke-to-spoke tunnels have been successfully established and are carrying traffic, with a tunnel stuck in a negotiating state signaling a DVPN registration or resolution failure.
What Can Be Monitored
- DVPN tunnel negotiation state
- tunnel session status
- per-tunnel traffic statistics
This MIB depends on
Related MIBs
Imported Objects
From A3COM-HUAWEI-OID-MIB
| h3cCommon | OBJECT-IDENTITY |
From IF-MIB
| ifIndex | OBJECT-TYPE |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus | |
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| h3cDvpn | 1.3.6.1.4.1.43.45.1.10.2.57 | This MIB is Dynamic Virtual Private Network(Dvpn) mib. This MIB is applicable to router. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detail information. | ||
| DVP h3cDvpnClAlgorithmSuite | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.3.1.6 | DvpnAlgorithmSuite | read-create | The algorithm suite used by the client when sending registry packets to the server. 'dvpnAlgorithmNone' is not supported here. |
| h3cDvpnClassEntry | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.3.1 | not-accessible | The entry of the h3cDvpnClassTable. | |
| h3cDvpnClassGroup | 1.3.6.1.4.1.43.45.1.10.2.57.1.4.2.4 | A collection of objects providing dvpn class information. | ||
| OCT h3cDvpnClassName | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.3.1.1 | OCTET STRING | not-accessible | The dvpn class name. It is the index of h3cDvpnClassTable. |
| I32 h3cDvpnClassNumber | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.2 | Integer32 | read-only | The number of dvpn classes. It is only used on client. |
| ROW h3cDvpnClassRowStatus | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.3.1.12 | RowStatus | read-create | The status of this conceptual row. Only 'active', 'createAndGo' and 'destroy' are supported. |
| h3cDvpnClassTable | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.3 | not-accessible | The Dvpn class table. It is only used on dvpn client. | |
| INT h3cDvpnClAuthenServerType | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.3.1.7 | INTEGER | read-create | The authentication type being used by client to server. The value is decided by the class configuration of the user. The default value is none. |
| I32 h3cDvpnClearDomainAllConection | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.21 | Integer32 | read-write | Clear all dvpn conects in the domain, the parameter is the id of the domain. |
| I32 h3cDvpnClearDvpnStaInfo | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.22 | Integer32 | read-write | Clear the statistic information of dvpn. |
| I32 h3cDvpnClientNumber | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.3 | Integer32 | read-only | The number of clients which register on the server. When a session of server to client type is built, add 1 to the value of this node. It is only used on server. |
| I32 h3cDvpnClientRegisterDumb | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.6 | Integer32 | read-write | The length of time when client dumbs, the unit is second. It is only used on client. |
| I32 h3cDvpnClientRegisterInterval | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.5 | Integer32 | read-write | The length of time between the registering of client, the unit is second. It is only used on client. |
| I32 h3cDvpnClientRegisterRetry | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.7 | Integer32 | read-write | Regist retry times of client after register fail. It is only used on client. |
| OCT h3cDvpnClPasswd | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.3.1.11 | OCTET STRING | read-create | Dvpn password. It is configured by the user. |
| OCT h3cDvpnClPreShareKey | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.3.1.8 | OCTET STRING | read-create | Dvpn PreShareKey. It is used when the method used by client when authenticating server is pre-share-key, only when the value of the key is the same as that on the server, the client can authenticate server successfully. |
| INT h3cDvpnClPwdEncrypted | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.3.1.10 | INTEGER | read-create | Dvpn password encrypted or not. |
| IP h3cDvpnClServerPriIp | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.3.1.5 | InetAddress | read-create | Dvpn server private ip address. |
| IPt h3cDvpnClServerPriIpType | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.3.1.4 | InetAddressType | read-create | Dvpn server private ip type (ipv4, ipv6). |
| IP h3cDvpnClServerPublicIp | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.3.1.3 | InetAddress | read-create | Dvpn server public ip address. |
| IPt h3cDvpnClServerPublicIpType | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.3.1.2 | InetAddressType | read-create | Dvpn server public ip type (ipv4, ipv6). |
| OCT h3cDvpnClUserName | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.3.1.9 | OCTET STRING | read-create | Dvpn UserName. It is configured by the user. |
| INT h3cDvpnCurrentDeviceRole | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.13 | INTEGER | read-only | The current role of the device. The value is decided by the configuration of the tunnel-interface. |
| U32 h3cDvpnDomainDropPkt | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.2.1.5 | Unsigned32 | read-only | The number of drop packets in this dvpn domain. |
| U32 h3cDvpnDomainEncryptErrorPkt | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.2.1.8 | Unsigned32 | read-only | The number of encrypt error packets in this dvpn domain. |
| I32 h3cDvpnDomainID | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.2.1.1 | Integer32 | not-accessible | Dvpn domain ID. |
| h3cDvpnDomainInfoEntry | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.2.1 | not-accessible | The entry of h3cDvpnDomainInfoTable. | |
| h3cDvpnDomainInfoGroup | 1.3.6.1.4.1.43.45.1.10.2.57.1.4.2.3 | A collection of objects providing dvpn domain information. | ||
| h3cDvpnDomainInfoTable | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.2 | not-accessible | The dvpn domain table. | |
| U32 h3cDvpnDomainInputPkt | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.2.1.4 | Unsigned32 | read-only | The number of input packets in this dvpn domain. |
| I32 h3cDvpnDomainNumber | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.14 | Integer32 | read-only | The number of dvpn domains. |
| U32 h3cDvpnDomainOutputErrorPkt | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.2.1.7 | Unsigned32 | read-only | The number of output error packets in this dvpn domain. |
| U32 h3cDvpnDomainOutputPkt | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.2.1.6 | Unsigned32 | read-only | The number of output packets in this dvpn domain. |
| U32 h3cDvpnDomainRedirectNum | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.2.1.3 | Unsigned32 | read-only | The number of redirect packets in this dvpn domain. |
| U32 h3cDvpnDomainSessionNum | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.2.1.2 | Unsigned32 | read-only | The number of session in this dvpn domain. |
| U32 h3cDvpnDropPkt | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.9 | Unsigned32 | read-only | The number of packets have been droped. |
| U32 h3cDvpnEncryptErrorPkt | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.12 | Unsigned32 | read-only | The number of packets have been encrypted wrongly. |
| INT h3cDvpnGlobalAuthenClientType | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.24 | INTEGER | read-write | Dvpn global authentication type being used by server to client. The value is decided by the configuration by the user. |
| h3cDvpnGlobalGroup | 1.3.6.1.4.1.43.45.1.10.2.57.1.4.2.1 | A collection of objects providing dvpn global information. | ||
| OCT h3cDvpnGlobalUserDefAAADomain | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.25 | OCTET STRING | read-write | Dvpn global AAA domain of the user. The domain will decide the authentication server which is used by the dvpn server to authenticate dvpn client. |
| U32 h3cDvpnInputPkt | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.8 | Unsigned32 | read-only | The number of recieved packets. |
| OCT h3cDvpnLocalDeviceId | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.26 | OCTET STRING | read-only | The device ID, it is a string. |
| I32 h3cDvpnMapAgeTime | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.4 | Integer32 | read-write | Dvpn map age time, the unit is second. It is only used on server. |
| NTF h3cDvpnMapBuildNotification | 1.3.6.1.4.1.43.45.1.10.2.57.1.3.0.3 | Dvpn map build notification. | ||
| TIK h3cDvpnMapBuildTime | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.5.1.4 | TimeTicks | read-only | The time of the map created, the unit is second. |
| U32 h3cDvpnMapControlId | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.5.1.15 | Unsigned32 | read-only | Dvpn map control ID. |
| NTF h3cDvpnMapDelNotification | 1.3.6.1.4.1.43.45.1.10.2.57.1.3.0.4 | Dvpn map deleted notification. | ||
| U32 h3cDvpnMapDvpnId | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.5.1.3 | Unsigned32 | read-only | The ID of the dvpn domain which the map belongs to. The dvpn ID is 0 means that the map has not been built. It has not gotten the dvpn ID at that time. |
| h3cDvpnMapEntry | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.5.1 | not-accessible | The entry of the h3cDvpnMapTable. | |
| h3cDvpnMapGroup | 1.3.6.1.4.1.43.45.1.10.2.57.1.4.2.6 | A collection of objects providing dvpn map information. | ||
| U32 h3cDvpnMapIndex | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.5.1.1 | Unsigned32 | accessible-for-notify | The index of h3cDvpnMapTable. |
| IP h3cDvpnMapLocalPriIp | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.5.1.10 | InetAddress | read-only | The private ip of map local device. |
| IPt h3cDvpnMapLocalPriIpType | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.5.1.9 | InetAddressType | read-only | The private ip type (ipv4, ipv6) of map local device. |
| IP h3cDvpnMapLocalPublicIp | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.5.1.12 | InetAddress | read-only | The public ip of map local device. |
| IPt h3cDvpnMapLocalPublicIpType | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.5.1.11 | InetAddressType | read-only | The public ip type (ipv4, ipv6) of map local device. |
| I32 h3cDvpnMapNumber | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.15 | Integer32 | read-only | The number of dvpn maps. |
| OCT h3cDvpnMapPeerDeviceId | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.5.1.2 | OCTET STRING | read-only | The identifier of peer device. It is a string. |
| IP h3cDvpnMapPeerPriIp | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.5.1.6 | InetAddress | read-only | The private ip of map peer device. |
| IPt h3cDvpnMapPeerPriIpType | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.5.1.5 | InetAddressType | read-only | The private ip type (ipv4, ipv6) of map peer device. |
| IP h3cDvpnMapPeerPublicIp | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.5.1.8 | InetAddress | read-only | The public ip of map peer device. |
| IPt h3cDvpnMapPeerPublicIpType | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.5.1.7 | InetAddressType | read-only | The public ip type (ipv4, ipv6) of map peer device. |
| INT h3cDvpnMapState | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.5.1.17 | INTEGER | read-only | mapClientInit: The client initiates the map. mapClientBegin: The client begins the process of registering to the server. mapClientAlgreq: The client requests to negotiate the algorithm. mapClientKexReq: The client requests to negotiate the key. mapClientAuthenReq: The client sends authentication information to the server. mapClientConfigReq: The client requests to get some configuration information from the server. Do not support now. mapClientReq: The client requests to register to the server. mapClientSuccess: The client registers to the server successfully. mapServerBegin: The server begins the process of receive a new register. mapServerAlgorithm:The sever begins to negotiate Algorithm. mapServerKexInit: The server replys to the algorithm negotiation packet from the client successfully and begin to negotiate key. mapServerAuthenInit: The server replys to the key negotiation packet from the client successfully and begin to authenticate client, in the case of the authentication-client method is not none. mapServerConfigInit: The server send some configuration information to client. Do not support now. mapServerInit: The server replys to the authentication packet from the client successfully and begin to receive client information. mapServerFinished: The server receives client information successfully. |
| h3cDvpnMapTable | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.5 | not-accessible | The dvpn map table. | |
| INT h3cDvpnMapTrapEnable | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.18 | INTEGER | read-write | Dvpn map trap enable or disable. |
| DVP h3cDvpnMapType | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.5.1.16 | DvpnCommunicateType | read-only | The type of the map. 'clientToclient' is not supported here. |
| I32 h3cDvpnMapUdpPort | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.5.1.14 | Integer32 | read-only | The udp port used by map peer device. |
| OCT h3cDvpnMapUserName | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.5.1.13 | OCTET STRING | read-only | The user name used by the client registering to server. If the client is not been authenticated, this is a null string. |
| h3cDvpnMibCompliance | 1.3.6.1.4.1.43.45.1.10.2.57.1.4.1.1 | The compliance statement for entities which implement the DVPN MIB. | ||
| h3cDvpnMibCompliances | 1.3.6.1.4.1.43.45.1.10.2.57.1.4.1 | |||
| h3cDvpnMibConformance | 1.3.6.1.4.1.43.45.1.10.2.57.1.4 | |||
| h3cDvpnMibGlobal | 1.3.6.1.4.1.43.45.1.10.2.57.1.1 | |||
| h3cDvpnMibGroups | 1.3.6.1.4.1.43.45.1.10.2.57.1.4.2 | |||
| h3cDvpnMibNotification | 1.3.6.1.4.1.43.45.1.10.2.57.1.3 | |||
| h3cDvpnMibObjects | 1.3.6.1.4.1.43.45.1.10.2.57.1 | |||
| h3cDvpnMibTableTroop | 1.3.6.1.4.1.43.45.1.10.2.57.1.2 | |||
| h3cDvpnNotification | 1.3.6.1.4.1.43.45.1.10.2.57.1.3.0 | |||
| h3cDvpnNotificationGroup | 1.3.6.1.4.1.43.45.1.10.2.57.1.4.2.9 | A collection of objects providing dvpn notification information. | ||
| U32 h3cDvpnOutputErrorPkt | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.11 | Unsigned32 | read-only | The number of output error packets. |
| U32 h3cDvpnOutputPkt | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.10 | Unsigned32 | read-only | The number of packets have been sent. |
| INT h3cDvpnPoAuthenClientType | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.1.1.2 | INTEGER | read-create | The authentication type used by server to client. The value is decided by the policy configuration of the user. The default value is none. |
| DVP h3cDvpnPoDataAlgorithmSuite | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.1.1.7 | DvpnAlgorithmSuite | read-create | The algorithm suite used by the session for createing ipsec sa. |
| h3cDvpnPolicyEntry | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.1.1 | not-accessible | The entry of h3cDvpnPolicyTable. | |
| h3cDvpnPolicyGroup | 1.3.6.1.4.1.43.45.1.10.2.57.1.4.2.2 | A collection of objects providing dvpn policy information. | ||
| OCT h3cDvpnPolicyName | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.1.1.1 | OCTET STRING | not-accessible | The name of Dvpn policy. |
| h3cDvpnPolicyTable | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.1 | not-accessible | The dvpn policy table. It is used on dvpn server. | |
| I32 h3cDvpnPoRefTimes | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.1.1.10 | Integer32 | read-only | The total times of the policy being used by dvpn. |
| ROW h3cDvpnPoRowStatus | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.1.1.11 | RowStatus | read-create | The status of this conceptual row. We support the characteristic of active(1),createAndGo(4),destroy(6). |
| I32 h3cDvpnPoSaSeconds | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.1.1.8 | Integer32 | read-create | The duration of DVPN IPSec security association. The unit is second. |
| DVP h3cDvpnPoSessionAlgorithmSuite | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.1.1.3 | DvpnAlgorithmSuite | read-create | The algorithm suite used when session is created. |
| I32 h3cDvpnPoSessionIdleTime | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.1.1.4 | Integer32 | read-create | The session idle time, the unit is second. |
| I32 h3cDvpnPoSessionKeepTime | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.1.1.5 | Integer32 | read-create | The session keepalive time, the unit is second. |
| I32 h3cDvpnPoSessionSetupInterval | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.1.1.6 | Integer32 | read-create | The session setup interval time, the unit is second. |
| OCT h3cDvpnPoUserDefAAADomain | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.1.1.9 | OCTET STRING | read-create | Dvpn policy AAA domain of the user. The domain will decide the authentication server which used by the dvpn server to authenticate dvpn client. |
| OCT h3cDvpnServerPreSharedKey | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.17 | OCTET STRING | read-write | The pre-shared-key of server. It is only used on server. |
| INT h3cDvpnServiceEnable | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.1 | INTEGER | read-write | Dvpn service enable or disable. If dvpn service is 'disable', dvpn service can not be used. |
| NTF h3cDvpnSessionBuildNotification | 1.3.6.1.4.1.43.45.1.10.2.57.1.3.0.1 | Dvpn session build notification. | ||
| TIK h3cDvpnSessionBuildTime | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.6.1.5 | TimeTicks | read-only | The time of the Session being built, the unit is second. |
| NTF h3cDvpnSessionDelNotification | 1.3.6.1.4.1.43.45.1.10.2.57.1.3.0.2 | Dvpn session deleted notification. | ||
| I32 h3cDvpnSessionDvpnId | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.6.1.1 | Integer32 | accessible-for-notify | The ID of the dvpn domain which the session belongs to. |
| h3cDvpnSessionEntry | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.6.1 | not-accessible | The entry of h3cDvpnSessionTable. | |
| h3cDvpnSessionGroup | 1.3.6.1.4.1.43.45.1.10.2.57.1.4.2.7 | A collection of objects providing dvpn session information. | ||
| I32 h3cDvpnSessionHisAgeTime | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.27 | Integer32 | read-write | The age-time of the h3cDvpnSessionHisTable table. The unit is hour. |
| I32 h3cDvpnSessionHisDvpnID | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.7.1.1 | Integer32 | not-accessible | The ID of the dvpn domain which the session belongs to. |
| h3cDvpnSessionHisEntry | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.7.1 | not-accessible | The entry of h3cDvpnSessionHisTable. | |
| TIK h3cDvpnSessionHisFirstUpTime | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.7.1.7 | TimeTicks | read-only | The session first online time. |
| h3cDvpnSessionHisGroup | 1.3.6.1.4.1.43.45.1.10.2.57.1.4.2.8 | A collection of objects providing dvpn session history information. | ||
| TIK h3cDvpnSessionHisLastDownTime | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.7.1.9 | TimeTicks | read-only | The session last down time. |
| TIK h3cDvpnSessionHisLastUpTime | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.7.1.8 | TimeTicks | read-only | The session last online time. |
| INT h3cDvpnSessionHisOnlineFlag | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.7.1.10 | INTEGER | read-only | If the session is online, the value is 'yes'. If the session is not online, the value is 'no'. |
| U32 h3cDvpnSessionHisOnlineNumber | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.7.1.6 | Unsigned32 | read-only | The number of the session online. |
| OCT h3cDvpnSessionHisPeerDeviceId | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.7.1.11 | OCTET STRING | read-only | The identifier of peer device. It is a string. |
| IP h3cDvpnSessionHisPeerPriIP | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.7.1.3 | InetAddress | not-accessible | The private ip of the session peer device. |
| IPt h3cDvpnSessionHisPeerPriIPType | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.7.1.2 | InetAddressType | read-only | The private ip type (ipv4, ipv6) of session peer device. |
| U32 h3cDvpnSessionHisRcvPkt | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.7.1.5 | Unsigned32 | read-only | The number of received packets on the session. |
| INT h3cDvpnSessionHisReset | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.28 | INTEGER | read-write | The reset flag of dvpn h3cDvpnSessionHisTable table. |
| U32 h3cDvpnSessionHisSendPkt | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.7.1.4 | Unsigned32 | read-only | The number of sent packets on the session. |
| h3cDvpnSessionHisTable | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.7 | not-accessible | The dvpn session history table. This table contains session's history information, include input/output packet number, up/down time, etc. This table will exist during the 'h3cDvpnSessionHisAgeTime'. | |
| INT h3cDvpnSessionInitiator | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.6.1.13 | INTEGER | read-only | The flag of initiator. |
| IP h3cDvpnSessionLocalPriIp | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.6.1.11 | InetAddress | read-only | The private ip of session local device. |
| IPt h3cDvpnSessionLocalPriIpType | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.6.1.10 | InetAddressType | read-only | The private ip type (ipv4, ipv6) of session local device. |
| IP h3cDvpnSessionLocalPubIp | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.6.1.9 | InetAddress | read-only | The public ip of session local device. |
| IPt h3cDvpnSessionLocalPubIpType | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.6.1.8 | InetAddressType | read-only | The public ip type (ipv4, ipv6) of session local device. |
| I32 h3cDvpnSessionNumber | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.16 | Integer32 | read-only | The number of dvpn sessiones including the session of all states. |
| OCT h3cDvpnSessionPeerDeviceId | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.6.1.4 | OCTET STRING | read-only | The device ID of session peer device. It is a string. |
| IP h3cDvpnSessionPeerPriIp | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.6.1.3 | InetAddress | accessible-for-notify | The private ip of the session peer device. |
| IPt h3cDvpnSessionPeerPriIpType | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.6.1.2 | InetAddressType | accessible-for-notify | The private ip type (ipv4, ipv6) of session peer device. |
| IP h3cDvpnSessionPeerPubIp | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.6.1.7 | InetAddress | read-only | The public ip of session peer device. |
| IPt h3cDvpnSessionPeerPubIpType | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.6.1.6 | InetAddressType | read-only | The public ip type (ipv4, ipv6) of session peer device. |
| INT h3cDvpnSessionPeerType | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.6.1.17 | INTEGER | read-only | The type of the session peer device. It may be client software or a router. |
| I32 h3cDvpnSessionPeerUdpPort | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.6.1.12 | Integer32 | read-only | The udp port used by session peer device . |
| INT h3cDvpnSessionState | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.6.1.15 | INTEGER | read-only | The state of the session. sessionSetupInit: The initiation of the session. sessionSetupReq: The initiator requests to negotiate the SA and so on of the session. sessionSetupSuccess: The session has been built successfully. sessionRekeyReq: The initiator requests to renegotiate the SA. sessionRekeyRep: The passive side replies with a SA renegotiation response packet successfully. |
| h3cDvpnSessionTable | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.6 | not-accessible | The dvpn session table. | |
| INT h3cDvpnSessionTrapEnable | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.19 | INTEGER | read-write | Dvpn session trap enable or disable. |
| DVP h3cDvpnSessionType | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.6.1.16 | DvpnCommunicateType | read-only | The type of the session. |
| OCT h3cDvpnSessionUserName | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.6.1.14 | OCTET STRING | read-only | The user's name. If the session type is client to client, the value of this object is a null string. |
| U32 h3cDvpnTotalRedirectNumber | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.23 | Unsigned32 | read-only | The number of redirect packets. It is only used on server. |
| I32 h3cDvpnTunnelAcl | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.4.1.2 | Integer32 | read-write | The security acl used by the tunnel. If a packet permits the rules, it will not be encrypted. |
| OCT h3cDvpnTunnelClass | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.4.1.6 | OCTET STRING | read-write | The dvpn class used by the tunnel. Only the interface type is client, it can be used. |
| INT h3cDvpnTunnelClientRegType | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.4.1.3 | INTEGER | read-write | The register type used by the client . Only the interface type is client, it can be used. undistributed: If a client send a packet to the client with this configuration, setver will only forward the packet whitout sending redirect packets. forward: The client with this configuration will only send packets forwarded by server, which means it can not initiate to build a session with other clients. undistributedandforward: The client with this configuration have the characteristics of both 'forward' and 'undistributed'. normal: The client with this configuration can build session with other clients without any restriction. |
| I32 h3cDvpnTunnelDvpnId | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.4.1.4 | Integer32 | read-write | The dvpn ID used by the tunnel. The dvpn ID is 0 means that user does not configure dvpn ID. User can not configure a dvpn ID with 0. |
| h3cDvpnTunnelEntry | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.4.1 | not-accessible | The Entry of h3cDvpnTunnelTable. | |
| h3cDvpnTunnelGroup | 1.3.6.1.4.1.43.45.1.10.2.57.1.4.2.5 | A collection of objects providing dvpn tunnel interface information. | ||
| INT h3cDvpnTunnelInterfaceType | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.4.1.1 | INTEGER | read-write | The type of dvpn tunnel (client or server). |
| OCT h3cDvpnTunnelPolicy | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.4.1.5 | OCTET STRING | read-write | The dvpn policy used by the tunnel. Only the interface type is server, it can be used. |
| h3cDvpnTunnelTable | 1.3.6.1.4.1.43.45.1.10.2.57.1.2.4 | not-accessible | The dvpn tunnel table. | |
| INT h3cDvpnVersion | 1.3.6.1.4.1.43.45.1.10.2.57.1.1.20 | INTEGER | read-only | Dvpn version. |
RFC description
Huawei dynamic VPN management for routers supporting encryption algorithms, key management, and IPsec tunnel configuration.
Start monitoring H3C/3Com routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.