ALCATEL-IND1-NETSEC-MIB

All MIBs › ALCATEL-IND1-NETSEC-MIB

Organization: Alcatel IND

Last Updated: 2010-05-13

Category: VPN and Security, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch network security MIB for managing ARP/DHCP inspection, IP source guard, and spoofing prevention.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-NETSEC-MIB?

ALCATEL-IND1-NETSEC-MIB is an Alcatel (Alcatel-Lucent) enterprise MIB for the OmniSwitch 'Birds of Prey' product line, covering the EtherBreaker network-security feature that performs ARP/DHCP inspection, IP source guard, and spoofing prevention. It exposes configuration data for port-range groups and monitoring groups, alongside fault/anomaly data describing detected security events. Its monitoring value centers on software/security-service status rather than physical hardware -- the anomaly and anomaly-state objects indicate whether the switch's built-in intrusion/spoofing detection has flagged suspicious activity on a group of interfaces, functioning as a security health signal for the switch. It belongs to the broader Alcatel IND1 enterprise MIB family used across the OmniSwitch line alongside other alcatelIND1* modules. It is typically deployed on Alcatel OmniSwitch campus/edge switches to protect Layer 2/3 access ports against ARP and DHCP-based attacks. Engineers can download the ALCATEL-IND1-NETSEC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-NETSEC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel OmniSwitch (Birds of Prey product line) switches

Monitoring Examples

The alaNetSecPortRangeGroupTable/alaNetSecPortRangeGroupEntry rows define named port ranges via alaNetSecPortRangeGroupStartIfId and alaNetSecPortRangeGroupEndIfId, while alaNetSecMonitoringGroupTable ties a named monitoring group to specific anomaly types through alaNetSecMonitoringGroupAnomaly. An administrator would poll alaNetSecMonitoringGroupAnomalyState to see whether an anomaly such as an ARP spoofing attempt or DHCP snooping violation has been detected on the interfaces in that group. A transition of this state to an alarmed value would reveal an active attack or misbehaving host on the monitored port range.

What Can Be Monitored

port range group configuration
monitoring group anomaly type
anomaly detection state
ARP/DHCP inspection activity

Imported Objects

From ALCATEL-IND1-BASE

softentIND1NetSec

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using alaNetSecPortStatsLastIngress OID:

Select an Alcatel-Lucent Enterprise OmniSwitch switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type alaNetSecPortStatsLastIngress into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the count of Indexed Ingress packets observed during last 5 seconds. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1NETSECMIB	1.3.6.1.4.1.6486.801.1.2.1.48.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Configuration and monitoring of the EtherBreaker feature. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1NETSECMIBNotifications	1.3.6.1.4.1.6486.801.1.2.1.48.1.0			Branch For NETSEC MIB Subsystem Notifications.
NTF alaNetSecPortTrapAnomaly	1.3.6.1.4.1.6486.801.1.2.1.48.1.0.1			Trap for an anomaly detected on a port.
NTF alaNetSecPortTrapQuarantine	1.3.6.1.4.1.6486.801.1.2.1.48.1.0.2			Trap for an anomalous port quarantine.
alcatelIND1NETSECMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.48.1.1
alaNetSecPortRangeConfig	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.1
alaNetSecPortRangeGroupTable	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.1.1		not-accessible	Table for collecting port-range and monitoring-group associations. A port belongs to at most one monitoring-group.
alaNetSecPortRangeGroupEntry	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.1.1.1		not-accessible	Each entry is identified by a unique port-range.
NUM alaNetSecPortRangeGroupStartIfId	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.1.1.1.1	InterfaceIndex	not-accessible	Starting interface index of a port-range
NUM alaNetSecPortRangeGroupEndIfId	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.1.1.1.2	InterfaceIndex	not-accessible	Ending interface index of a port-range
STR alaNetSecPortRangeGroupName	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.1.1.1.3	SnmpAdminString	read-create	Name of monitoring-group with which this port-range is associated.
ROW alaNetSecPortRangeGroupRowStatus	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.1.1.1.4	RowStatus	read-create	identifies state of this entry. CREATEANDGO will only work, if the name of alaNetSecPortRangeGroupName is part of the create request
alaNetSecMonitoringGroupConfig	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.2
alaNetSecMonitoringGroupTable	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.2.1		not-accessible	Table for collecting monitoring-groups' anomaly configurations
alaNetSecMonitoringGroupEntry	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.2.1.1		not-accessible	Each entry identifies configuration of a monitoring-group's anomaly-type's parameter
STR alaNetSecMonitoringGroupName	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.2.1.1.1	SnmpAdminString	not-accessible	name of the monitoring-group
ALA alaNetSecMonitoringGroupAnomaly	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.2.1.1.2	AlaAnomalyType	not-accessible	monitoring-group's anomaly-type
ALA alaNetSecMonitoringGroupAnomalyState	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.2.1.1.3	AlaNetsecStatus	read-create	State of detecting indexed anomaly.
ALA alaNetSecMonitoringGroupAnomalyLog	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.2.1.1.4	AlaNetsecStatus	read-create	State of logging upon detecting anomaly.
ALA alaNetSecMonitoringGroupAnomalyTrap	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.2.1.1.5	AlaNetsecStatus	read-create	State of sending traps upon detecting anomaly.
ALA alaNetSecMonitoringGroupAnomalyQuarantine	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.2.1.1.6	AlaNetsecStatus	read-create	State of Quarantining anomalous port upon detecting anomaly.
I32 alaNetSecMonitoringGroupAnomalyCount	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.2.1.1.7	Integer32	read-create	Count of packets that must be seen during monitoring period to initiate anomaly detection check. Default value varies as below with anomaly: Anomaly Count ------- ----- ARP address scan 50 ARP flood 90 ARP poisoning 6 ARP Failure 6 ICMP address scan 30 ICMP Flood 90 ICMP Unreachable 20 TCP port Scan 20 TCP address scan 30 SYN flood 90 SYN Failure 10 SYN-ACK Scan 2 FIN Scan 6 FIN-ACK Diff 5 RST Count 50
I32 alaNetSecMonitoringGroupAnomalySensitivity	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.2.1.1.8	Integer32	read-create	Sensitivity of Anomaly Check to deviation from expected behavior.
I32 alaNetSecMonitoringGroupAnomalyPeriod	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.2.1.1.9	Integer32	read-create	Time in seconds to monitor packets before checking for anomaly.
ROW alaNetSecMonitoringGroupRowStatus	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.2.1.1.10	RowStatus	read-create	CREATEANDGO will only work if, besides RowStatus, at least one of State, Log, Trap, Quarantine, Count, Sensitivity or Period is part of the request.
alaNetSecPortStats	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.3
alaNetSecPortStatsTable	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.3.1		not-accessible	Table for reporting port specific statistics
alaNetSecPortStatsEntry	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.3.1.1		not-accessible	Stats are collected on a basis
NUM alaNetSecPortStatsIfId	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.3.1.1.1	InterfaceIndex	not-accessible	Interface Index of the port
ALA alaNetSecPortStatsPacket	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.3.1.1.2	AlaPacketType	not-accessible	Packet type
C32 alaNetSecPortStatsLastIngressEx	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.3.1.1.3	Counter32	read-only	Count of Indexed Ingress packets observed during last 5 seconds
C32 alaNetSecPortStatsLastEgress	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.3.1.1.4	Counter32	read-only	Count of Indexed Egress packets observed during last 5 seconds
C32 alaNetSecPortStatsTotalIngress	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.3.1.1.5	Counter32	read-only	Count of Indexed Ingress packets observed since monitoring was enabled, Counter will loop back from zero upon reaching the maximum
C32 alaNetSecPortStatsTotalEgress	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.3.1.1.6	Counter32	read-only	Count of Indexed Egress packets observed since monitoring was enabled. Counter will loop back from zero upon reaching the maximum
alaNetSecPortAnomalyStats	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.4
alaNetSecPortAnomalyStatsTable	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.4.1		not-accessible	Table for reporting Anomaly statistics
alaNetSecPortAnomalyStatsEntry	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.4.1.1		not-accessible	Stats are collected on a basis
NUM alaNetSecPortAnomalyStatsIfId	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.4.1.1.1	InterfaceIndex	not-accessible	Interface Index of the port
ALA alaNetSecPortAnomalyStatsAnomaly	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.4.1.1.2	AlaAnomalyType	not-accessible	Anomaly type
ALA alaNetSecPortAnomalyStatsPacket	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.4.1.1.3	AlaPacketType	not-accessible	Packet type
C32 alaNetSecPortAnomalyStatsCurrentIngress	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.4.1.1.4	Counter32	read-only	Count of Indexed packets ingress during current monitoring period.
C32 alaNetSecPortAnomalyStatsCurrentEgress	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.4.1.1.5	Counter32	read-only	Count of Indexed packets egress during current monitoring period.
C32 alaNetSecPortAnomalyStatsLastIngress	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.4.1.1.6	Counter32	read-only	Count of Indexed packets ingress during last monitoring period.
C32 alaNetSecPortAnomalyStatsLastEgress	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.4.1.1.7	Counter32	read-only	Count of Indexed packets egress during last monitoring period.
alaNetSecPortAnomalySummary	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.5
alaNetSecPortAnomalySummaryTable	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.5.1		not-accessible	Table for reporting Anomaly summaries
alaNetSecPortAnomalySummaryEntry	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.5.1.1		not-accessible	Summary are reported on a basis
NUM alaNetSecPortAnomalySummaryIfId	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.5.1.1.1	InterfaceIndex	not-accessible	Interface Index of port
ALA alaNetSecPortAnomalySummaryAnomaly	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.5.1.1.2	AlaAnomalyType	not-accessible	Anomaly type
C32 alaNetSecPortAnomalySummaryObserved	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.5.1.1.3	Counter32	read-only	Count of observations for indexed anomaly on indexed port since monitoring was enabled.
C32 alaNetSecPortAnomalySummaryDetected	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.5.1.1.4	Counter32	read-only	Count of detections for indexed anomaly on indexed port since monitoring was enabled.
alaNetSecPortOp	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.6
alaNetSecPortOpTable	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.6.1		not-accessible	Table for reporting port anomaly operation parameters
alaNetSecPortOpEntry	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.6.1.1		not-accessible	Each entry is identified by a unique port, and anomaly-type combination
NUM alaNetSecPortOpIfId	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.6.1.1.1	InterfaceIndex	not-accessible	interface index of port
ALA alaNetSecPortOpAnomaly	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.6.1.1.2	AlaAnomalyType	not-accessible	anomaly-type
ALA alaNetSecPortOpState	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.6.1.1.3	AlaNetsecStatus	read-only	state of anomaly
ALA alaNetSecPortOpLog	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.6.1.1.4	AlaNetsecStatus	read-only	Logging state of anomaly
ALA alaNetSecPortOpTrap	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.6.1.1.5	AlaNetsecStatus	read-only	Trap state of anomaly
ALA alaNetSecPortOpQuarantine	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.6.1.1.6	AlaNetsecStatus	read-only	Quarantine state of anomaly
I32 alaNetSecPortOpCount	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.6.1.1.7	Integer32	read-only	activation-count being used by netsec on the indexed object
I32 alaNetSecPortOpSensitivity	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.6.1.1.8	Integer32	read-only	sensitivity being used by netsec on the indexed object
I32 alaNetSecPortOpPeriod	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.6.1.1.9	Integer32	read-only	monitoring period being used by netsec on the indexed object
alaNetSecGroupOp	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.7
alaNetSecGroupOpTable	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.7.1		not-accessible	Table for reporting group anomaly operation parameters
alaNetSecGroupOpEntry	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.7.1.1		not-accessible	Each entry is identified by a unique group, and anomaly-type combination
STR alaNetSecGroupOpName	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.7.1.1.1	SnmpAdminString	not-accessible	name of the group
ALA alaNetSecGroupOpAnomaly	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.7.1.1.2	AlaAnomalyType	not-accessible	anomaly-type
ALA alaNetSecGroupOpState	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.7.1.1.3	AlaNetsecStatus	read-only	state of anomaly
ALA alaNetSecGroupOpLog	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.7.1.1.4	AlaNetsecStatus	read-only	Logging state of anomaly
ALA alaNetSecGroupOpTrap	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.7.1.1.5	AlaNetsecStatus	read-only	Trap state of anomaly
ALA alaNetSecGroupOpQuarantine	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.7.1.1.6	AlaNetsecStatus	read-only	Quarantine state of anomaly
I32 alaNetSecGroupOpCount	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.7.1.1.7	Integer32	read-only	activation-count being used by netsec on the indexed object
I32 alaNetSecGroupOpSensitivity	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.7.1.1.8	Integer32	read-only	sensitivity being used by netsec on the indexed object
I32 alaNetSecGroupOpPeriod	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.7.1.1.9	Integer32	read-only	monitoring period being used by netsec on the indexed object
alaNetSecGroup	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.8
alaNetSecGroupTable	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.8.1		not-accessible	Table of groups configured
alaNetSecGroupEntry	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.8.1.1		not-accessible	Each entry identifies a configured group
STR alaNetSecGroupName	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.8.1.1.1	SnmpAdminString	not-accessible	Name of configured group
T/F alaNetSecGroupMemberPorts	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.8.1.1.2	TruthValue	read-only	Yes if there are ports in this group.
T/F alaNetSecGroupAnomalyCfg	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.8.1.1.3	TruthValue	read-only	Yes if any of this group's anomaly has a non-default configuration.
alaNetSecPortTrapsObj	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.9
NUM alaNetSecPortTrapInfoIfId	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.9.1	InterfaceIndex	accessible-for-notify	Interface index of port on which anomaly is detected
ALA alaNetSecPortTrapInfoAnomaly	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.9.2	AlaAnomalyType	accessible-for-notify	Type of anomaly detected on the interface
INT alaNetSecPortTrapInfoType	1.3.6.1.4.1.6486.801.1.2.1.48.1.1.9.3	INTEGER	accessible-for-notify	Nature of anomaly. Informs if system attached to interface is source or target of the anomaly.
alcatelIND1NETSECMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.48.1.2			Branch for NETSEC application conformance information
alcatelIND1NETSECMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.48.1.2.1			Branch for NETSEC application units of conformance
alaNetSecPortRangeComplianceGroup	1.3.6.1.4.1.6486.801.1.2.1.48.1.2.1.1			Collection of objects for management at port range level
alaNetSecMonitoringGroupComplianceGroup	1.3.6.1.4.1.6486.801.1.2.1.48.1.2.1.2			Collection of objects for management at port group level
alaNetSecPortTrapsComplianceGroup	1.3.6.1.4.1.6486.801.1.2.1.48.1.2.1.3			Traps
alaNetSecPortStatsComplianceGroup	1.3.6.1.4.1.6486.801.1.2.1.48.1.2.1.4			Port Statistics Collection
alaNetSecPortAnomalyStatsComplianceGroup	1.3.6.1.4.1.6486.801.1.2.1.48.1.2.1.5			Port Anomaly Statistics Collection
alaNetSecPortAnomalySummaryComplianceGroup	1.3.6.1.4.1.6486.801.1.2.1.48.1.2.1.6			Anomaly summary Collection
alaNetSecPortOpComplianceGroup	1.3.6.1.4.1.6486.801.1.2.1.48.1.2.1.7			Port operation parameter value Collection
alaNetSecGroupOpComplianceGroup	1.3.6.1.4.1.6486.801.1.2.1.48.1.2.1.8			Group operation parameter value Collection
alaNetSecGroupComplianceGroup	1.3.6.1.4.1.6486.801.1.2.1.48.1.2.1.9			Monitoring Group port membership Collection
alaNetSecMonitoringGroupEntryGroup	1.3.6.1.4.1.6486.801.1.2.1.48.1.2.1.10			Entry identifies configuration of a monitoring-group's anomaly-type's parameter group.
alaNetSecPortRangeGroupEntryGroup	1.3.6.1.4.1.6486.801.1.2.1.48.1.2.1.11			Entry is identified by a unique port-range group.
alaNetSecPortTrapAnomalyGroup	1.3.6.1.4.1.6486.801.1.2.1.48.1.2.1.12			Trap for an anomaly detected on a port group.
alcatelIND1NETSECMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.48.1.2.2			Branch for NETSEC application compliance statements
alcatelIND1NETSECMIBCompliance	1.3.6.1.4.1.6486.801.1.2.1.48.1.2.2.1			Compliance statement for NetSec.

RFC description

Alcatel-Lucent enterprise-specific SNMP MIB for Birds Of Prey Product Line configuration and monitoring of network security features and EtherBreaker functionality. Provides management information for security-related objects and network protection capabilities on Alcatel-Lucent networking devices.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-NETSEC-MIB