HUAWEI-BGP-VPN-MIB

All MIBs › HUAWEI-BGP-VPN-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2015-02-10

Category: MPLS and Traffic Engineering, Protocol: BGP, Routing Protocols, Technology: VPN, VPN and Security, Vendor: Huawei

Description: Huawei BGP VPN MIB for managing BGP/MPLS IP VPN instances, route targets, and VRF configuration on PE routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-BGP-VPN-MIB?

HUAWEI-BGP-VPN-MIB is a Huawei enterprise MIB for managing BGP/MPLS IP VPN (RFC 4364-style L3VPN) deployments on Huawei PE (provider edge) routers, covering VPN instance (VRF) definitions, route-target import/export policies, and related BGP VPN configuration. Its data centers on configuration and state of VPN instances rather than raw interface counters, tracking which VRFs exist, how route targets are attached to them, and the associated BGP VPN address-family settings. For monitoring purposes it lets an operator confirm a VRF's configuration and operational status is correct, and would reveal software/configuration faults such as a missing or misconfigured route target that prevents routes from being imported into a customer VPN. It is explicitly built to work alongside standard BGP and MPLS/VPN MIBs and depends conceptually on the BGP4-MIB and MPLS-related standards for underlying routing and label-switching state. This MIB is deployed in service-provider networks running Huawei PE routers that offer BGP/MPLS VPN services to enterprise customers. Engineers can download the HUAWEI-BGP-VPN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-BGP-VPN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei PE (provider edge) routers

Monitoring Examples

No sample objects were provided for this module; a realistic scenario, consistent with its stated purpose, would involve an operator polling the VPN-instance and route-target configuration tables to confirm a customer VRF has the expected import/export route targets, where a missing or incorrect route target would explain why routes from one customer site are not appearing in another site's VRF.

What Can Be Monitored

VPN instance (VRF) configuration
route target import/export policy
BGP VPN address-family settings

Imported Objects

From ENTITY-MIB

entPhysicalIndex

OBJECT-TYPE

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From IF-MIB

ifIndex	OBJECT-TYPE
ifName	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From MPLS-L3VPN-STD-MIB

mplsL3VpnVrfConfMidRteThresh	OBJECT-TYPE
mplsL3VpnVrfPerfCurrNumRoutes	OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using hwBgpPeerPrefixRcvCounter OID:

Select a Huawei PE (provider edge) router (BGP/MPLS L3VPN) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hwBgpPeerPrefixRcvCounter into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of prefixes received from the remote BGP peer. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwBgpMIB	1.3.6.1.4.1.2011.5.25.177			The Mib module for management of BGP/VPN. Huawei Technologies co.,Ltd. Supplementary information may be available at: http://www.huawei.com
hwBgpObjects	1.3.6.1.4.1.2011.5.25.177.1
hwBgpPeers	1.3.6.1.4.1.2011.5.25.177.1.1
hwBgpPeerAddrFamilyTable	1.3.6.1.4.1.2011.5.25.177.1.1.1		not-accessible	BGP Peer Address Family Table. This table contains information about the address family for BGP peers.
hwBgpPeerAddrFamilyEntry	1.3.6.1.4.1.2011.5.25.177.1.1.1.1		not-accessible	The information about the address family for BGP peers.
U32 hwBgpPeerInstanceId	1.3.6.1.4.1.2011.5.25.177.1.1.1.1.1	Unsigned32	not-accessible	The index of the instance for the remote BGP peer.
HWB hwBgpPeerAddrFamilyAfi	1.3.6.1.4.1.2011.5.25.177.1.1.1.1.2	HWBgpAfi	not-accessible	The index of the address family for the remote BGP peer.
HWB hwBgpPeerAddrFamilySafi	1.3.6.1.4.1.2011.5.25.177.1.1.1.1.3	HWBgpSafi	not-accessible	The index of the sub-address family for the remote peer.
IPt hwBgpPeerType	1.3.6.1.4.1.2011.5.25.177.1.1.1.1.4	InetAddressType	not-accessible	The type of the address family for the remote BGP peer.
IP hwBgpPeerIPAddr	1.3.6.1.4.1.2011.5.25.177.1.1.1.1.5	InetAddress	not-accessible	The IP address of the remote BGP peer.
OCT hwBgpPeerVrfName	1.3.6.1.4.1.2011.5.25.177.1.1.1.1.6	OCTET STRING	read-only	The name of the VPN instance.
hwBgpPeerTable	1.3.6.1.4.1.2011.5.25.177.1.1.2		not-accessible	BGP Peer Table. This table contains information about the connections for BGP peers.
hwBgpPeerEntry	1.3.6.1.4.1.2011.5.25.177.1.1.2.1		not-accessible	The information about the connections with BGP peers.
U32 hwBgpPeerNegotiatedVersion	1.3.6.1.4.1.2011.5.25.177.1.1.2.1.1	Unsigned32	read-only	The version negotiated with the remote BGP peer.
U32 hwBgpPeerRemoteAs	1.3.6.1.4.1.2011.5.25.177.1.1.2.1.2	Unsigned32	read-only	The AS number of the remote BGP peer.
IP hwBgpPeerRemoteAddr	1.3.6.1.4.1.2011.5.25.177.1.1.2.1.4	InetAddress	read-only	The IP address of the remote BGP peer.
INT hwBgpPeerState	1.3.6.1.4.1.2011.5.25.177.1.1.2.1.5	INTEGER	read-only	The status of the remote BGP peer, including: 1: Idle(1) 2: Connect(2) 3: Active(3) 4: Opensent(4) 5: Openconfirm(5) 6: Established(6)
U32 hwBgpPeerFsmEstablishedCounter	1.3.6.1.4.1.2011.5.25.177.1.1.2.1.6	Unsigned32	read-write	The Counter That Records the Times the Remote BGP Peer Is Correctly Connected The counter is increased by one if the remote BGP peer is correctly connected once. The counter could be set to zero.
G32 hwBgpPeerFsmEstablishedTime	1.3.6.1.4.1.2011.5.25.177.1.1.2.1.7	Gauge32	read-only	The counter that records the times the remote BGP peer is correctly connected.
INT hwBgpPeerGRStatus	1.3.6.1.4.1.2011.5.25.177.1.1.2.1.8	INTEGER	accessible-for-notify	Graceful restart status of the BGP peer, including: 1: peerNotBeingHelped, indicating that the BGP peer will not be helped during restarting. 2: peerRestarting, indicating that the BGP peer is detected restarting. 3: peerFinishRestart, indicating that the BGP peer finishes the latest GR. 4: peerHelping, indicating that the BGP peer is helping the local end to perform GR.
OCT hwBgpPeerLastError	1.3.6.1.4.1.2011.5.25.177.1.1.2.1.9	OCTET STRING	read-only	The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode.
U32 hwBgpPeerUnAvaiReason	1.3.6.1.4.1.2011.5.25.177.1.1.2.1.10	Unsigned32	read-only	Bgp peer down reason including: 1: Configuration lead peer down(1) 2: Receive notification(2) 3: Receive error packet(3) 4: Hold timer expire(4) 5: Remote peer not reachable(5) 6: Direct connect-interface down(6) 7: Route limit(7)
hwBgpPeerRouteTable	1.3.6.1.4.1.2011.5.25.177.1.1.3		not-accessible	Route table for BGP Peers This table contains routing information about the BGP peers.
hwBgpPeerRouteEntry	1.3.6.1.4.1.2011.5.25.177.1.1.3.1		not-accessible	The routing information about the BGP peers.
C32 hwBgpPeerPrefixRcvCounterEx	1.3.6.1.4.1.2011.5.25.177.1.1.3.1.1	Counter32	read-only	The number of prefixes received from the remote BGP peer.
C32 hwBgpPeerPrefixActiveCounter	1.3.6.1.4.1.2011.5.25.177.1.1.3.1.2	Counter32	read-only	The number of active prefixes received from the remote BGP peer.
C32 hwBgpPeerPrefixAdvCounter	1.3.6.1.4.1.2011.5.25.177.1.1.3.1.3	Counter32	read-only	The number of prefixes sent to the remote BGP peer.
hwBgpPeerMessageTable	1.3.6.1.4.1.2011.5.25.177.1.1.4		not-accessible	Protocol Packet Table for BGP Peers This table contains information about the protocol packets of BGP peers.
hwBgpPeerMessageEntry	1.3.6.1.4.1.2011.5.25.177.1.1.4.1		not-accessible	The information about the protocol packets of the BGP peers.
C32 hwBgpPeerInTotalMsgCounter	1.3.6.1.4.1.2011.5.25.177.1.1.4.1.1	Counter32	read-only	The total number of protocol packets received from the remote BGP peer.
C32 hwBgpPeerOutTotalMsgCounter	1.3.6.1.4.1.2011.5.25.177.1.1.4.1.2	Counter32	read-only	The total number of protocol packets sent to the remote BGP peer.
C32 hwBgpPeerInOpenMsgCounter	1.3.6.1.4.1.2011.5.25.177.1.1.4.1.3	Counter32	read-only	The total number of Open packets received from the remote BGP peer.
C32 hwBgpPeerInUpdateMsgCounter	1.3.6.1.4.1.2011.5.25.177.1.1.4.1.4	Counter32	read-only	The total number of Update packets received from the remote BGP peer.
C32 hwBgpPeerInNotificationMsgCounter	1.3.6.1.4.1.2011.5.25.177.1.1.4.1.5	Counter32	read-only	The total number of Notification packets received from the remote BGP peer.
C32 hwBgpPeerInKeepAliveMsgCounter	1.3.6.1.4.1.2011.5.25.177.1.1.4.1.6	Counter32	read-only	The total number of Keepalive packets received from the remote BGP peer.
C32 hwBgpPeerInRouteFreshMsgCounter	1.3.6.1.4.1.2011.5.25.177.1.1.4.1.7	Counter32	read-only	The total number of Route-Refresh packets received from the remote BGP peer.
C32 hwBgpPeerOutOpenMsgCounter	1.3.6.1.4.1.2011.5.25.177.1.1.4.1.8	Counter32	read-only	The total number of Open packets sent to the remote BGP peer.
C32 hwBgpPeerOutUpdateMsgCounter	1.3.6.1.4.1.2011.5.25.177.1.1.4.1.9	Counter32	read-only	The total number of Update packets sent to the remote BGP peer.
C32 hwBgpPeerOutNotificationMsgCounter	1.3.6.1.4.1.2011.5.25.177.1.1.4.1.10	Counter32	read-only	The total number of Notification packets sent to the remote BGP peer.
C32 hwBgpPeerOutKeepAliveMsgCounter	1.3.6.1.4.1.2011.5.25.177.1.1.4.1.11	Counter32	read-only	The total number of Keepalive packets sent to the remote BGP peer.
C32 hwBgpPeerOutRouteFreshMsgCounter	1.3.6.1.4.1.2011.5.25.177.1.1.4.1.12	Counter32	read-only	The total number of Route-Refresh packets sent to the remote BGP peer.
hwBgpPeerConfigTable	1.3.6.1.4.1.2011.5.25.177.1.1.5		not-accessible	BGP Peer Configuration Table. This table contains the configurations of BGP peers.
hwBgpPeerConfigEntry	1.3.6.1.4.1.2011.5.25.177.1.1.5.1		not-accessible	This object indicates the configurations of BGP peers.
U32 hwBgpPeerConfigRouteLimitNum	1.3.6.1.4.1.2011.5.25.177.1.1.5.1.1	Unsigned32	read-only	This object indicates the maximum number of routes received from the BGP peer.
U32 hwBgpPeerConfigRouteLimitThreshold	1.3.6.1.4.1.2011.5.25.177.1.1.5.1.2	Unsigned32	read-only	This object indicates the alarm threshold (%) of the maximum number of routes received from the BGP peer.
hwBgpPeerSessionTable	1.3.6.1.4.1.2011.5.25.177.1.1.6		not-accessible	BGP Peer Session Table. This table contains BGP peer session informations.
hwBgpPeerSessionEntry	1.3.6.1.4.1.2011.5.25.177.1.1.6.1		not-accessible	The information about the BGP peer sessions.
OCT hwBgpPeerSessionVrfName	1.3.6.1.4.1.2011.5.25.177.1.1.6.1.1	OCTET STRING	accessible-for-notify	Bgp Vrf id.
IPt hwBgpPeerSessionRemoteAddrType	1.3.6.1.4.1.2011.5.25.177.1.1.6.1.2	InetAddressType	accessible-for-notify	Bgp peer session remote address type.
IP hwBgpPeerSessionRemoteAddr	1.3.6.1.4.1.2011.5.25.177.1.1.6.1.3	InetAddress	accessible-for-notify	Bgp peer session remote address.
IPt hwBgpPeerSessionLocalAddrType	1.3.6.1.4.1.2011.5.25.177.1.1.6.1.4	InetAddressType	read-only	Bgp peer session local address type.
IP hwBgpPeerSessionLocalAddr	1.3.6.1.4.1.2011.5.25.177.1.1.6.1.5	InetAddress	read-only	Bgp peer session local address.
INT hwBgpPeerSessionUnavailableType	1.3.6.1.4.1.2011.5.25.177.1.1.6.1.6	INTEGER	read-only	Bgp peer unavailable type including: 1: Up To Down(1) 2: Always Down(2)
OCT hwBgpPeerSessionLocalIfName	1.3.6.1.4.1.2011.5.25.177.1.1.6.1.7	OCTET STRING	read-only	Bgp peer session local IFName.
INT hwBgpPeerSessionReason	1.3.6.1.4.1.2011.5.25.177.1.1.6.1.8	INTEGER	read-only	Bgp peer down reason including: 1: Configuration lead peer down(1) 2: Receive notification(2) 3: Receive error packet(3) 4: Hold timer expire(4) 5: Remote peer not reachable(5) 6: Direct connect-interface down(6) 7: Route limit(7) 8: Peer is not up for a specified long time(8) 100: Alarm clear(100)
hwBgpRoute	1.3.6.1.4.1.2011.5.25.177.1.2
hwBgpRouteLimitTable	1.3.6.1.4.1.2011.5.25.177.1.2.1
INT hwBgpRouteLimitindex	1.3.6.1.4.1.2011.5.25.177.1.2.1.1	INTEGER	accessible-for-notify	The index of bgp route limit, including: 1.ipv4(1): total ipv4 routes number. 2.ipv6(2): total ipv6 routes number. 3.ipv4vrf(3): ipv4 vrf routes number. 4.ipv6vrf(4): ipv6 vrf routes number. 5.ipv4public(5): ipv4 public routes number. 6.ipv6public(6): ipv6 public routes number. 7.l2ad(7): l2ad routes number.
U32 hwBgpRouteCurNum	1.3.6.1.4.1.2011.5.25.177.1.2.1.2	Unsigned32	accessible-for-notify	The current number of bgp routes.
U32 hwBgpRouteMaxNum	1.3.6.1.4.1.2011.5.25.177.1.2.1.3	Unsigned32	accessible-for-notify	The maximum number of bgp routes.
U32 hwBgpRouteThreshold	1.3.6.1.4.1.2011.5.25.177.1.2.1.4	Unsigned32	accessible-for-notify	The threshold number of bgp routes.
hwBgpTraps	1.3.6.1.4.1.2011.5.25.177.1.3
NTF hwBgpPeerRouteNumThresholdExceed	1.3.6.1.4.1.2011.5.25.177.1.3.1			This notification is generated when the number of routes received from the BGP peer exceeds the alarm threshold.
NTF hwBgpPeerRouteNumThresholdClear	1.3.6.1.4.1.2011.5.25.177.1.3.2			This notification is generated when the number of routes received from the BGP peer decreases below the alarm threshold.
NTF hwBgpPeerGRStatusChange	1.3.6.1.4.1.2011.5.25.177.1.3.3			This notification is generated when the graceful restart status described by hwBgpPeerGRStatus changes.
NTF hwBgpPeerUnavailable	1.3.6.1.4.1.2011.5.25.177.1.3.4			This notification is generated when bgp peer session state change from up to down.
NTF hwBgpPeerAvailable	1.3.6.1.4.1.2011.5.25.177.1.3.5			This notification is generated when bgp peer session state change from down to up.
NTF hwBgpPeerRouteExceed	1.3.6.1.4.1.2011.5.25.177.1.3.6			This notification is generated when bgp peer session route number exceed.
NTF hwBgpPeerRouteExceedClear	1.3.6.1.4.1.2011.5.25.177.1.3.7			This notification is generated when bgp peer session route number exceed clear.
NTF hwL3vpnVrfRouteMidThreshCleared	1.3.6.1.4.1.2011.5.25.177.1.3.8			This notification is generated when the number of routes contained by the specified VRF exceeds the value indicated by mplsL3VpnVrfMidRouteThreshold, and then falls below this value. A single notification MUST be generated when this threshold is exceeded, and no other notifications of this type should be issued until the value of mplsL3VpnVrfPerfCurrNumRoutes has fallen below that of mplsL3VpnVrfConfMidRteThresh.
NTF hwBgpPeerEstablished	1.3.6.1.4.1.2011.5.25.177.1.3.9			The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.
NTF hwBgpPeerBackwardTransition	1.3.6.1.4.1.2011.5.25.177.1.3.10			The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.
NTF hwBgpRouteThresholdExceed	1.3.6.1.4.1.2011.5.25.177.1.3.11			This notification is generated when the number of bgp routes exceeds the threshold.
NTF hwBgpRouteThresholdClear	1.3.6.1.4.1.2011.5.25.177.1.3.12			This notification is generated when the number of routes decreases below the threshold.
NTF hwBgpRouteMaxExceed	1.3.6.1.4.1.2011.5.25.177.1.3.13			This notification is generated when the number of routes exceeds the maximum number.
NTF hwBgpRouteMaxClear	1.3.6.1.4.1.2011.5.25.177.1.3.14			This notification is generated when the number of routes decreases below the maximum number.
NTF hwBgpPeerSessionExceed	1.3.6.1.4.1.2011.5.25.177.1.3.15			This notification is generated when the number of peer sessions exceeds the maximum number.
NTF hwBgpPeerSessionExceedClear	1.3.6.1.4.1.2011.5.25.177.1.3.16			This notification is generated when the number of peer sessions decreases below the maximum number.
hwBgpScalars	1.3.6.1.4.1.2011.5.25.177.1.4
U32 hwBgpPeerSessionNum	1.3.6.1.4.1.2011.5.25.177.1.4.1	Unsigned32	read-only	The total number of BGP peer sessions configured.
U32 hwIBgpPeerSessionNum	1.3.6.1.4.1.2011.5.25.177.1.4.2	Unsigned32	read-only	The total number of Internal BGP peer sessions configured.
U32 hwEBgpPeerSessionNum	1.3.6.1.4.1.2011.5.25.177.1.4.3	Unsigned32	read-only	The total number of External BGP peer sessions configured.
U32 hwBgpPeerSessionMaxNum	1.3.6.1.4.1.2011.5.25.177.1.4.4	Unsigned32	read-only	The max number of BGP peer sessions configured.
hwBgpVpnObjects	1.3.6.1.4.1.2011.5.25.177.2
hwBgpVpnTunnelTable	1.3.6.1.4.1.2011.5.25.177.2.1		not-accessible	This object indicates the VPN-tunnel bearing relation table that shows detailed information about the tunnel that bears the VPN service.
hwBgpVpnTunnelEntry	1.3.6.1.4.1.2011.5.25.177.2.1.1		not-accessible	This object indicates detailed information about the tunnel bearing VPN services. This object can be queried, but not be set or created.
OCT hwBgpVpnTunnelVrfName	1.3.6.1.4.1.2011.5.25.177.2.1.1.1	OCTET STRING	not-accessible	This object indicates the VRF name.
IP hwBgpVpnTunnelPublicNetNextHop	1.3.6.1.4.1.2011.5.25.177.2.1.1.2	IpAddress	not-accessible	This object indicates the next hop in the public network.
U32 hwBgpVpnTunnelId	1.3.6.1.4.1.2011.5.25.177.2.1.1.3	Unsigned32	not-accessible	The value of this object identifies the tunnel ID.
IP hwBgpVpnTunnelDestAddr	1.3.6.1.4.1.2011.5.25.177.2.1.1.4	IpAddress	read-only	This object indicates the destination address of the tunnel.
U32 hwBgpVpnTunnelType	1.3.6.1.4.1.2011.5.25.177.2.1.1.5	Unsigned32	read-only	The value of this object identifies the tunnel type.
IP hwBgpVpnTunnelSrcAddr	1.3.6.1.4.1.2011.5.25.177.2.1.1.6	IpAddress	read-only	This object indicates the source address of the tunnel.
OCT hwBgpVpnTunnelOutIfName	1.3.6.1.4.1.2011.5.25.177.2.1.1.7	OCTET STRING	read-only	This object indicates the name of the outgoing interface for the tunnel.
U32 hwBgpVpnTunnelIsLoadBalance	1.3.6.1.4.1.2011.5.25.177.2.1.1.8	Unsigned32	read-only	The value of this object identifies whether load balancing is performed.
U32 hwBgpVpnTunnelLspIndex	1.3.6.1.4.1.2011.5.25.177.2.1.1.9	Unsigned32	read-only	The value of this object identifies the index of the primary LSP for the tunnel.
OCT hwBgpVpnTunnelLspOutIfName	1.3.6.1.4.1.2011.5.25.177.2.1.1.10	OCTET STRING	read-only	This object indicates the name of the outgoing interface for the primary LSP of the tunnel.
U32 hwBgpVpnTunnelLspOutLabel	1.3.6.1.4.1.2011.5.25.177.2.1.1.11	Unsigned32	read-only	The value of this object identifies the outgoing label for the primary LSP of the tunnel.
IP hwBgpVpnTunnelLspNextHop	1.3.6.1.4.1.2011.5.25.177.2.1.1.12	IpAddress	read-only	This object indicates the next hop for the primary LSP of the tunnel.
IP hwBgpVpnTunnelLspFec	1.3.6.1.4.1.2011.5.25.177.2.1.1.13	IpAddress	read-only	This object indicates the FEC for the primary LSP of the tunnel.
IP hwBgpVpnTunnelLspFecPfxLen	1.3.6.1.4.1.2011.5.25.177.2.1.1.14	IpAddress	read-only	This object indicates the length of the FEC for the primary LSP of the tunnel.
U32 hwBgpVpnTunnelLspIsBackup	1.3.6.1.4.1.2011.5.25.177.2.1.1.15	Unsigned32	read-only	The value of this object identifies whether the LSP is the backup LSP.
I32 hwBgpVpnTunnelSignalProtocol	1.3.6.1.4.1.2011.5.25.177.2.1.1.16	Integer32	read-only	The value of this object identifies signaling protocol type of the tunnel.
I32 hwBgpVpnTunnelSessionTunnelId	1.3.6.1.4.1.2011.5.25.177.2.1.1.17	Integer32	read-only	The value of this object identifies ID of the tunnel configured through the command.
OCT hwBgpVpnTunnelTunnelName	1.3.6.1.4.1.2011.5.25.177.2.1.1.18	OCTET STRING	read-only	This object indicates the tunnel name.
hwBgpVpnServiceIdTable	1.3.6.1.4.1.2011.5.25.177.2.2		not-accessible	This object indicates the Service-id of the L3VPN services.
hwBgpVpnServiceIdEntry	1.3.6.1.4.1.2011.5.25.177.2.2.1		not-accessible	This object indicates detailed information about the Service-id of L3VPN services. This object can be queried, set but not created.
OCT hwBgpVpnServiceIdVrfName	1.3.6.1.4.1.2011.5.25.177.2.2.1.1	OCTET STRING	not-accessible	This object indicates the VRF name.
U32 hwBgpVpnServiceIdValue	1.3.6.1.4.1.2011.5.25.177.2.2.1.2	Unsigned32	read-write	The value of this object identifies the Service-id.
hwBgpVpnScalars	1.3.6.1.4.1.2011.5.25.177.2.3
U32 hwConfiguredVrfs	1.3.6.1.4.1.2011.5.25.177.2.3.1	Unsigned32	read-only	The number of VRFs that are configured on this node.
U32 hwConfiguredIpv4Vrfs	1.3.6.1.4.1.2011.5.25.177.2.3.2	Unsigned32	read-only	The number of IPv4-family VRFs that are configured on this node.
U32 hwConfiguredIpv6Vrfs	1.3.6.1.4.1.2011.5.25.177.2.3.3	Unsigned32	read-only	The number of IPv6-family VRFs that are configured on this node.
hwBgpConformance	1.3.6.1.4.1.2011.5.25.177.3
hwBgpCompliances	1.3.6.1.4.1.2011.5.25.177.3.1
hwBgpCompliance	1.3.6.1.4.1.2011.5.25.177.3.1.1			The compliance statement for Huawei-BGP-VPN MIB
hwBgpGroups	1.3.6.1.4.1.2011.5.25.177.3.2
hwBgpPeerAddrFamily	1.3.6.1.4.1.2011.5.25.177.3.2.1			Address Family Group for BGP peers This table contains members of the address family for BGP peers
hwBgpPeer	1.3.6.1.4.1.2011.5.25.177.3.2.2			BGP Peer Group. This table contains members of the connections with BGP peers.
hwBgpPeerRoute	1.3.6.1.4.1.2011.5.25.177.3.2.3			Route Group for BGP Peers This table contains members of the routes with BGP peers.
hwBgpPeerMessage	1.3.6.1.4.1.2011.5.25.177.3.2.4			Protocol Packet Group for BGP Peers This table contains members of the protocol packets with BGP peers.
hwBgpPeerConfig	1.3.6.1.4.1.2011.5.25.177.3.2.5			Configuration Group for BGP Peers. This table contains members of the configurations of BGP peers.
hwBgpTrap	1.3.6.1.4.1.2011.5.25.177.3.2.6			Trap Group for BGP Peers. This table contains members of the traps of BGP peers.
hwBgpVpnConformance	1.3.6.1.4.1.2011.5.25.177.5
hwBgpVpnCompliances	1.3.6.1.4.1.2011.5.25.177.5.1
hwBgpVpnCompliance	1.3.6.1.4.1.2011.5.25.177.5.1.1			The compliance statement for Route Management MIB.
hwBgpVpnExtGroups	1.3.6.1.4.1.2011.5.25.177.5.2
hwBgpVpnTunnelGroup	1.3.6.1.4.1.2011.5.25.177.5.2.1			Description.
hwBgpVpnServiceIdGroup	1.3.6.1.4.1.2011.5.25.177.5.2.2			This object indicates the Service-id of the L3VPN services.
hwTnl2VpnTrapObjects	1.3.6.1.4.1.2011.5.25.177.6
hwTnl2VpnTrapTable	1.3.6.1.4.1.2011.5.25.177.6.1		not-accessible	Tnl2Vpn Trap table. This table contains the trap information. This table is only used for sending trap messages and does not support the get/getnext/set operation.
hwTnl2VpnTrapEntry	1.3.6.1.4.1.2011.5.25.177.6.1.1		not-accessible	This object indicates detailed information about the trap message.
U32 hwVpnId	1.3.6.1.4.1.2011.5.25.177.6.1.1.1	Unsigned32	accessible-for-notify	This object indicates the VPN index.
IP hwVpnPublicNextHop	1.3.6.1.4.1.2011.5.25.177.6.1.1.2	IpAddress	accessible-for-notify	This object indicates the public next-hop address.
U32 hwTunnelReachablityEvent	1.3.6.1.4.1.2011.5.25.177.6.1.1.3	Unsigned32	accessible-for-notify	This object indicates whether the tunnel is reachable. 1--tunnel reachable. 2--tunnel unreachable.
U32 hwVpnTrapCkeyValue	1.3.6.1.4.1.2011.5.25.177.6.1.1.4	Unsigned32	accessible-for-notify	This object indicates the ckey value. This value is used for getting next-hop information.
hwTnl2VpnTrapConformance	1.3.6.1.4.1.2011.5.25.177.7
hwTnl2VpnTrapConformances	1.3.6.1.4.1.2011.5.25.177.7.1
hwTnl2VpnTrapCompliance	1.3.6.1.4.1.2011.5.25.177.7.1.1			The compliance statement for Huawei-BGP-VPN MIB.
hwTnl2VpnTrapGroups	1.3.6.1.4.1.2011.5.25.177.7.2
hwTnl2VpnTrapGroup	1.3.6.1.4.1.2011.5.25.177.7.2.1			Description.
hwTnl2VpnTrapNotificationGroup	1.3.6.1.4.1.2011.5.25.177.7.2.2			Description.
hwTnl2VpnTrapNotification	1.3.6.1.4.1.2011.5.25.177.8
NTF hwTnl2VpnTrapEvent	1.3.6.1.4.1.2011.5.25.177.8.1			This trap indicates whether the tunnel used by a VPN is reachable, If the tunnel is unreachable, a trap is sent to notify the user, hwTunnelReachablityEvent is 2. If the tunnel is reachable, a trap is sent to notify the user, hwTunnelReachablityEvent is 1.
hwPeerDistributeObjects	1.3.6.1.4.1.2011.5.25.177.9
U32 hwBgpTotalRouteNumber	1.3.6.1.4.1.2011.5.25.177.9.1	Unsigned32	read-only	The total number of BGP routes.
hwOsNodeTable	1.3.6.1.4.1.2011.5.25.177.9.2		not-accessible	Table contains some statistic information entries orgnized by os-node.
hwOsNodeEntry	1.3.6.1.4.1.2011.5.25.177.9.2.1		not-accessible	Every entry contains some statistic infomation on specific os-node.
U32 hwCurrSlot	1.3.6.1.4.1.2011.5.25.177.9.2.1.1	Unsigned32	read-only	The index of specific slot.
U32 hwPeerNumber	1.3.6.1.4.1.2011.5.25.177.9.2.1.4	Unsigned32	read-only	The number of the neighbors on the specific os-group.
U32 hwRouteNumber	1.3.6.1.4.1.2011.5.25.177.9.2.1.5	Unsigned32	read-only	The number of the routes on the specific os-group.
hwDistributeTable	1.3.6.1.4.1.2011.5.25.177.9.3		not-accessible	Table contains some information entries orgnized by distribute-instance.
hwDistributeEntry	1.3.6.1.4.1.2011.5.25.177.9.3.1		not-accessible	Every entry contains some infomation on specific distribute-instance.
U32 hwDistributeLocId	1.3.6.1.4.1.2011.5.25.177.9.3.1.1	Unsigned32	accessible-for-notify	The id of specific distribute-instance.
OCT hwDistributeName	1.3.6.1.4.1.2011.5.25.177.9.3.1.2	OCTET STRING	accessible-for-notify	The name of specific distribute-instance.
OCT hwMigrateSrcSlot	1.3.6.1.4.1.2011.5.25.177.9.3.1.3	OCTET STRING	accessible-for-notify	The source slot name the distribute-instances is from when migration happens.
OCT hwMigrateDestSlot	1.3.6.1.4.1.2011.5.25.177.9.3.1.4	OCTET STRING	accessible-for-notify	The destination slot name the distribute-instances is aboute to go when migration happens.
INT hwMigrateReason	1.3.6.1.4.1.2011.5.25.177.9.3.1.5	INTEGER	accessible-for-notify	The reason of a migration when it happens.
hwPeerDistributeTraps	1.3.6.1.4.1.2011.5.25.177.9.4
hwRpkiObjects	1.3.6.1.4.1.2011.5.25.177.11
hwRpkiSessions	1.3.6.1.4.1.2011.5.25.177.11.1
hwRpkiSessionTable	1.3.6.1.4.1.2011.5.25.177.11.1.1		not-accessible	RPKI Session Table. This table contains information about the RPKI sessions.
hwRpkiSessionEntry	1.3.6.1.4.1.2011.5.25.177.11.1.1.1		not-accessible	The information about the RPKI session.
MPL hwRpkiSessionVrfName	1.3.6.1.4.1.2011.5.25.177.11.1.1.1.1	MplsL3VpnName	not-accessible	The index of the instance for the session.
IPt hwRpkiSessionType	1.3.6.1.4.1.2011.5.25.177.11.1.1.1.2	InetAddressType	not-accessible	The type of the address family for the remote session.
IP hwSessionIPAddr	1.3.6.1.4.1.2011.5.25.177.11.1.1.1.3	InetAddress	not-accessible	The IP address of the session.
U32 hwRpkiSessionRoaLimitNum	1.3.6.1.4.1.2011.5.25.177.11.1.1.1.4	Unsigned32	read-only	The IP address of the session.
hwRpkiTraps	1.3.6.1.4.1.2011.5.25.177.11.2
NTF hwRpkiSessionRoaExceed	1.3.6.1.4.1.2011.5.25.177.11.2.1			This notification is generated when rpki session ROA number exceed.
NTF hwRpkiSessionRoaExceedClear	1.3.6.1.4.1.2011.5.25.177.11.2.2			This notification is generated when rpki session ROA number exceed clear.
hwRpkiConformance	1.3.6.1.4.1.2011.5.25.177.11.3
hwRpkiCompliances	1.3.6.1.4.1.2011.5.25.177.11.3.1
hwRpkiCompliance	1.3.6.1.4.1.2011.5.25.177.11.3.1.1			The compliance statement for Huawei-BGP-VPN MIB
hwRpkiGroups	1.3.6.1.4.1.2011.5.25.177.11.3.2
hwRpkiSession	1.3.6.1.4.1.2011.5.25.177.11.3.2.1			Session Group for RPKI sessions This table contains members of session for RPKI
hwRpkiTrap	1.3.6.1.4.1.2011.5.25.177.11.3.2.2			Trap Group for RPKI Sessions. This table contains members of the traps of RPKI Sessions.

RFC description

Huawei vendor-private MIB managing BGP/MPLS VPN configuration and monitoring, defines objects for BGP peer address families, VPN tunnel relationships, and L3VPN service IDs.

Start monitoring Huawei PE (provider edge) router (BGP/MPLS L3VPN) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-BGP-VPN-MIB