167 modules in Network Interfaces
| Module | Description |
|---|---|
| A3COM-HUAWEI-3GMODEM-MIB | Manages 3G modem interfaces on H3C devices, providing connection status, signal quality, and data counters. |
| A3COM-HUAWEI-EFM-COMMON-MIB | Defines common Ethernet in the First Mile (EFM/IEEE 802.3ah) objects shared by H3C OAM MIB modules. |
| A3COM-HUAWEI-LswINF-MIB | Monitors physical and logical interface status, speed, and error counters on H3C LAN switch platforms. |
| A3COM-SWITCHING-SYSTEMS-TOKEN-RING-MIB | Manages Token Ring network interfaces and ring parameters on 3Com SuperStack switching systems, including MAC statistics and ring station information. |
| ACC-ASPORT | Manages asynchronous serial port configuration on ACC/Ericsson access routers, including baud rate, flow control, modem control, and port mode settings. |
| ACC-ENET | Manages Ethernet interface configuration and statistics on ACC/Ericsson routers, including MAC address, duplex settings, and per-interface counters. |
| ACC-FR | Manages Frame Relay interface configuration on ACC/Ericsson routers, including DLCI management, LMI protocol settings, and traffic statistics. |
| ACC-ISDN | Manages ISDN interface configuration on ACC/Ericsson access routers, including switch type, TEI management, and SPID provisioning for BRI/PRI circuits. |
| ACC-LAPB | Manages LAPB (Link Access Procedure Balanced) X.25 data link layer configuration on ACC/Ericsson routers, covering frame parameters and error recovery. |
| Adapter-1030-MIB | Manages a generic 1030-series network adapter, providing interface configuration, link status, and basic traffic statistics. |
| ADSL-LINE-EXT-MIB IPNM ✓ | Adds extension objects for ADSL line management, supplementing ADSL-LINE-MIB with further objects for administering Asymmetric Digital Subscriber Line interfaces. |
| ADSL-LINE-MIB IPNM ✓ | Manages Asymmetric DSL (ADSL) line interfaces conforming to ANSI T1E1.413 and ITU-T G.992.1/G.992.2, including line configuration, status, and performance data. |
| ADSL2-LINE-MIB IPNM ✓ | Manages ADSL2 (G.992.3/G.992.4) and ADSL2+ (G.992.5) line interfaces, extending the original ADSL-LINE-MIB with enhanced line profile and performance objects. |
| ADTRAN-IF-PERF-HISTORY-MIB | Provides 15-minute and 24-hour interface performance history intervals on ADTRAN devices for SLA reporting. |
| AGGREGATED-EXT-MIB | Extends aggregated link management with additional LAG/LACP configuration and status objects beyond the base IEEE standard. |
| AISLCANALOG-MIB | Manages analog port parameters on AI-series Serial Line Card modules including modem and voice port configuration. |
| ALANTEC-MIB | Alantec (Nortel) proprietary MIB for managing fast Ethernet switch port configuration and statistics. |
| ALCATEL-IND1-PORT-MIB | Alcatel OmniSwitch port management MIB for configuring speed, duplex, flow control, and physical port parameters. |
| ALCATEL-IND1-TIMETRA-PORT-MIB | Alcatel 7750 SR service router port MIB for managing physical and logical port parameters and encapsulation types. |
| ALCOMA-MIB | ALCOMA point-to-point microwave link MIB for managing radio link parameters, modulation, and signal statistics. |
| ALU-MICROWAVE-MIB | Alcatel-Lucent microwave radio link MIB for managing point-to-point microwave system parameters and performance. |
| Amperion-MIB | Amperion broadband over powerline (BPL) network interface and link management. |
| ASANTE-AH1012-MIB | Manages Asante AH1012 Ethernet hub port status, counters, and configuration. |
| ASANTE-HUB1012-MIB | Provides SNMP management of Asante HUB1012 Ethernet repeater ports and statistics. |
| ASANTE-SWITCH-MIB | Manages Asante Technologies Ethernet switches for port control and traffic monitoring. |
| ASCEND-LANMODEM-MIB | Manages LAN-attached modem interfaces and connection parameters on Ascend access equipment. |
| ASCEND-MIBT1NET-MIB | Manages T1 WAN interface configuration, framing, and performance statistics on Ascend equipment. |
| ASCEND-WAN-MIB | Manages WAN link configuration, encapsulation, and performance statistics on Ascend equipment. |
| AT-ISDN-MIB | Manages ISDN interface configuration, B-channel status, and call connection statistics on Allied Telesis router products. |
| AtiL2-MIB | Provides Layer 2 switch management objects including VLAN configuration, port settings, and MAC tables on Allied Telesyn devices. |
| ATM-MIB IPNM ✓ | Defines managed objects for managing Asynchronous Transfer Mode (ATM) interfaces, virtual connections, and ATM cross-connects. |
| ATM-TC-MIB IPNM ✓ | Provides textual conventions and OBJECT-IDENTITY definitions used by MIB modules for managing ATM-based interfaces, devices, networks, and services. |
| ATM2-MIB IPNM ✓ | Defines supplemental managed objects for ATM interface management beyond the base ATM-MIB, adding support for ATM Switched and Permanent Virtual Connections. |
| AVICI-SONET-MIB | Monitors SONET/SDH interface performance, path overhead, and alarm conditions on Avici backbone router line cards. |
| BASEBRDD-MIB | Manages base bridging and routing functions on a multi-function access device, covering forwarding and spanning tree. |
| BASEBRDD-MIB-MIB | Provides supplementary bridging and routing management objects extending the BASEBRDD-MIB module. |
| BDCOM-INTERFACES | Defines interface type registrations and supplementary interface objects for BDCOM networking equipment. |
| BIANCA-BRICK-SIF-MIB | Manages synchronous interface (SIF) configuration and status on bintec elmeg BIANCA/BRICK routers. |
| BLADETYPE2-NETWORK-MIB | Manages network interface configuration and statistics for HP BladeSystem Type 2 server blade modules. |
| BLADETYPE4-NETWORK-MIB | Manages network interface configuration and statistics for HP BladeSystem Type 4 server blade modules. |
| BLADETYPE5-NETWORK-MIB | Manages network interface configuration and statistics for HP BladeSystem Type 5 server blade modules. |
| BLADETYPE6-NETWORK-MIB | Manages network interface configuration and statistics for HP BladeSystem Type 6 server blade modules. |
| BRIDGE-OPT-MIB | Manages bridge protocol options and spanning tree configuration for LAN bridge devices. |
| BTI8xx-INTERFACE-MIB | Manages line interface configuration and performance monitoring on BTI Systems BTI8xx optical devices. |
| BUNDLE-MIB | Manages link bundling (bonding/aggregation) configuration and member interface status for multi-link connections. |
| CHAR-MIB | Implements RFC 1658 character stream device management for terminal servers and character-oriented network port hardware. |
| CHARACTER-MIB IPNM ✓ | Defines managed objects for character stream devices and their sessions, covering terminal servers and similar character-oriented port hardware. |
| CHIPENET-MIB | Manages Chipcom (3Com) Ethernet interface configuration and traffic statistics on modular hub and switch platforms. |
| CHIPFDDINET-MIB | Manages Chipcom (3Com) FDDI (Fiber Distributed Data Interface) network interface configuration and ring statistics. |
| CHIPTRNET-MIB | Manages Chipcom (3Com) transparent bridging and network interconnection on legacy campus LAN equipment. |
| CIE1000-LLDP-MIB | Manages IEEE 802.1AB LLDP neighbor discovery and LLDP-MED configuration on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-PORT-MIB | Manages physical port configuration including speed, duplex, and operational status on Cisco IE1000 industrial Ethernet switches. |
| CIENA-CES-EXT-LAG-MIB | Manages extended Link Aggregation Group (LAG) features on Ciena CES Carrier Ethernet switches. |
| CIENA-CES-PORT-MIB | Manages physical port configuration, state, and statistics on Ciena CES Carrier Ethernet switches. |
| CIENA-WS-PORT-MIB | Manages client and line port configuration and status on Ciena WaveServer optical platforms. |
| CIENA-WS-XCVR-MIB | Monitors transceiver modules including optical power and type on Ciena WaveServer platforms. |
| CISCO-ATM-IF-MIB | Manages ATM interface parameters and per-interface statistics on Cisco ATM devices. |
| CISCO-ATM-VIRTUAL-IF-MIB | Manages virtual ATM interfaces and subinterface parameters on Cisco ATM devices. |
| CISCO-CAS-IF-EXT-MIB | Extends Channel Associated Signaling (CAS) interface management with additional Cisco-specific objects. |
| CISCO-CAS-IF-MIB | Manages CAS (Channel Associated Signaling) T1/E1 telephony interface configuration on Cisco gateways. |
| CISCO-CLASS-BASED-QOS-MIB IPNM ✓ | Provides read access to Quality of Service (QoS) configuration and statistics for Cisco platforms that support the Modular QoS Command-Line Interface (MQC). |
| CISCO-DOT3-OAM-MIB | Manages IEEE 802.3ah Ethernet OAM on Cisco devices, monitoring OAM discovery, link events, and remote loopback operations. |
| CISCO-DS0-CROSS-CONNECT-MIB | Manages DS0 time-slot cross-connect configurations on Cisco voice gateways and digital cross-connect systems. |
| CISCO-DS1-EXT-MIB | Provides Cisco-specific extensions to DS1/T1 interface management, adding proprietary performance and configuration objects. |
| CISCO-DS3-MIB | Provides Cisco-specific management objects for DS3/T3 interfaces, supplementing RFC 2496 with additional performance and framing controls. |
| CISCO-EIGRP-MIB IPNM ✓ | Provides SNMP management of EIGRP routing processes over IPv4 and IPv6, including interface, neighbor, topology, and traffic statistics tables. |
| CISCO-ETHER-CFM-MIB | Manages Ethernet Connectivity Fault Management (IEEE 802.1ag CFM) on Cisco devices, providing objects and notifications for end-to-end Ethernet OAM fault detection. |
| CISCO-EVC-MIB | Provides management objects for configuring and monitoring Ethernet Virtual Circuits (EVCs) on Cisco carrier Ethernet devices. |
| CISCO-FRAME-RELAY-MIB IPNM ✓ | Provides management objects for Frame Relay interface operations on Cisco devices. |
| CISCO-IF-EXTENSION-MIB IPNM ✓ | Provides Cisco-specific extensions to the standard interfaces MIB including link debounce and carrier-delay settings. |
| CISCO-MGX82XX-DSX1-MIB | Manages DS1/T1 interface configuration and performance statistics on Cisco MGX 8200 WAN switch line cards. |
| CISCO-MGX82XX-DSX3-MIB | Manages DS3/T3 interface configuration and performance statistics on Cisco MGX 8200 WAN switch line cards. |
| CISCO-MGX82XX-SONET-MIB | Manages SONET interface configuration and performance monitoring on Cisco MGX 8200 WAN switch line cards. |
| CISCO-MGX82XX-VIRTUAL-PORT-MIB | Manages virtual port configuration for ATM and Frame Relay connections on Cisco MGX 8200 WAN switches. |
| CISCO-MODEM-MGMT-MIB | Manages analog modem configuration, call statistics, and line quality on Cisco access server platforms. |
| CISCO-POP-MGMT-MIB IPNM ✓ | Manages Point of Presence (PoP) resources including access concentrators and subscriber sessions on Cisco platforms. |
| CISCO-SDWAN-OPER-SYSTEM-MIB | Provides operational system-level statistics and health metrics for Cisco SD-WAN vEdge and vManage nodes. |
| CISCO-SONET-MIB | Provides comprehensive SONET/SDH interface management including path, section, and line layer performance monitoring. |
| CISCO-SRP-MIB | Manages Spatial Reuse Protocol (SRP/DPT) ring interfaces and topology discovery on Cisco dynamic packet transport rings. |
| CISCO-SVC-INTERFACE-MIB | Manages supervisor virtual circuit (SVC) interfaces providing configuration and status for internal switch fabric connections. |
| CISCO-VOICE-ANALOG-IF-MIB | Manages Cisco analog voice interfaces including FXS, FXO, and E&M ports for POTS connectivity. |
| CISCO-WAN-3G-MIB | Manages Cisco WAN 3G cellular interfaces on MGX platform for mobile broadband WAN connectivity. |
| CISCO-WAN-BBIF-PORT-MIB | Manages Cisco WAN broadband interface port configuration and status on MGX service modules. |
| CISCO-WAN-CELL-EXT-MIB | Extends Cisco WAN cellular interface management with additional 3G/4G modem configuration objects. |
| CISCOME1200-MIB | Manages Cisco ME 1200 Metro Ethernet switch configuration, interfaces, and service provisioning. |
| CPQNIC-MIB | Monitors Compaq/HP ProLiant server network interface card health, link status, and throughput. |
| CPQNUNIF-MIB | Provides unified network management objects for Compaq/HP ProLiant server NIC teaming and bonding. |
| CTIF-EXT-MIB | Extends standard IF-MIB with Cabletron-specific interface attributes including duplex mode and flow control status. |
| DOCS-BPI-MIB IPNM ✓ | Defines managed objects for the DOCSIS 1.0 Baseline Privacy Interface (BPI) on cable modems and cable modem termination systems. |
| DOCS-CABLE-DEVICE-MIB IPNM ✓ | Manages DOCSIS-compliant cable modems and CMTS devices, covering device access control, software downloads, IP/MAC filtering, and CPE management. |
| DOCS-IETF-BPI2-MIB IPNM ✓ | Defines managed objects for the DOCSIS Baseline Privacy Plus (BPI+) interface, extending BPI with enhanced security including digital certificates. |
| DOCS-IF-MIB IPNM ✓ | Manages DOCSIS-compliant Radio Frequency (RF) interfaces on cable modems and cable modem termination systems, covering upstream/downstream channel configuration and statistics. |
| DOCS-QOS-MIB IPNM ✓ | Defines managed objects for QoS management of DOCSIS 1.1/2.0 compliant cable modems and CMTS devices, including packet classification and service flow parameters. |
| DOT12-RPTR-MIB IPNM ✓ | Defines managed objects for IEEE 802.12 (100VG-AnyLAN) repeater devices, providing monitoring and control of demand-priority network repeaters. |
| DOT3-EPON-MIB IPNM ✓ | Defines managed objects for Ethernet Passive Optical Network (EPON) interfaces per IEEE 802.3ah. |
| DOT3-OAM-MIB IPNM ✓ | Defines managed objects for IEEE 802.3ah Ethernet Operations, Administration, and Maintenance (OAM), including link monitoring, remote loopback, and fault signaling. |
| DS1-MIB IPNM ✓ | Defines managed objects for DS1, E1, DS2, and E2 interfaces, providing configuration, status, and performance monitoring for T1/E1 digital circuits. |
| DS3-MIB IPNM ✓ | Defines managed objects for DS3 and E3 interfaces, providing configuration, status, and performance monitoring for T3/E3 digital circuits. |
| EFM-CU-MIB IPNM ✓ | Defines managed objects for Ethernet in the First Mile Copper (EFMCu) interfaces, managing DSL-based Ethernet links over copper per IEEE 802.3ah. |
| EtherLike-MIB IPNM ✓ | Defines managed objects for Ethernet-like network interfaces, providing detailed Ethernet-specific statistics beyond what IF-MIB offers, such as alignment errors and FCS errors. |
| EXTREME-EAPS-MIB | Covers Ethernet Automatic Protection Switching (EAPS) on Extreme Networks devices, which delivers sub-second failover to keep Ethernet ring topologies fault-tolerant. |
| EXTREME-NP-MIB | Provides management objects for Extreme Networks network processor (NP) card information, covering hardware status and statistics of switching ASICs. |
| EXTREME-POE-MIB | Manages Power over Ethernet (PoE) on Extreme Networks switches, monitoring power sourcing equipment status, power consumption, and per-port PoE settings. |
| EXTREME-PORT-MIB | Extreme Networks MIB for detailed port configuration and statistics, including speed, duplex, load sharing, and port health on ExtremeXOS. |
| EXTREME-POS-MIB | Extreme Networks MIB for Packet over SONET/SDH (POS) interface management on Extreme Networks routing platforms. |
| FC-MGMT-MIB IPNM ✓ | Manages Fibre Channel interfaces and connectivity, including port names (WWNs), node associations, service classes, and higher-layer protocol bindings. |
| FDDI-SMT73-MIB IPNM ✓ | Standard FDDI SMT 7.3 MIB (RFC 1512) for managing FDDI ring parameters, stations, paths, and ports. |
| FIBRE-CHANNEL-FE-MIB IPNM ✓ | Defines managed objects for monitoring Fibre Channel interface information, including port status, errors, and performance counters. |
| FN10-MIB | Fibronics 10BASE-T network equipment MIB providing port, hub, and connectivity management objects for Fibronics 10Mbps devices. |
| FN100-MIB | Fibronics 100BASE-T Fast Ethernet MIB for managing Fibronics Fast Ethernet hubs, switches, and network adapters. |
| FRAME-RELAY-DTE-MIB IPNM ✓ | Covers managed objects for Frame Relay Data Terminal Equipment (DTE) interfaces, including DLCI status and error statistics. |
| FRNETSERV-MIB IPNM ✓ | Defines managed objects for Frame Relay network service, covering the management and monitoring of Frame Relay service interfaces and virtual circuits. |
| HC-PerfHist-TC-MIB IPNM ✓ | Extends PerfHist-TC-MIB with high-capacity (64-bit) textual conventions for 15-minute and 24-hour performance history data on high-speed interfaces. |
| HDSL2-SHDSL-LINE-MIB IPNM ✓ | Covers configuration and performance monitoring of HDSL2 and G.SHDSL line interfaces, both symmetric high-bit-rate DSL technologies. |
| HP-ICF-8023-RPTR | HP ICF SNMP MIB for IEEE 802.3 repeater/hub management on HP ProCurve network concentrators. |
| HP-ICF-GENERIC-RPTR | HP ICF SNMP MIB for generic repeater/hub management on HP ProCurve concentrators and network repeaters. |
| HP-ICF-TRANSCEIVER-MIB | HP ICF SNMP MIB for optical transceiver diagnostics including DOM data such as temperature, voltage, and optical power on HP ProCurve switches. |
| HP-ICF-VG-RPTR | HP ICF SNMP MIB for IEEE 802.12 100VG-AnyLAN repeater management on HP ProCurve voice-grade concentrators. |
| HPN-ICF-LswINF-MIB | Handles configuration of Layer 2 switch ports on HP/Comware switches, covering speed, duplex mode, and flow control. |
| IANA-MAU-MIB IPNM ✓ | Defines dot3MauType object identities and textual conventions for Ethernet medium attachment unit (MAU) types used in the MAU-MIB. |
| IANAifType-MIB IPNM ✓ | Defines the IANAifType textual convention, an IANA-maintained enumeration of network interface types used in the IF-MIB ifType object. |
| IEEE8023-LAG-MIB | IEEE 802.3ad Link Aggregation MIB for managing and monitoring LACP port channels, including aggregator configuration, port membership, and aggregation group status. |
| IF-MIB IPNM ✓ | Defines managed objects for managing network interfaces, including interface status, error counters, and packet send/receive statistics for every interface on a network node. |
| IGMP-STD-MIB IPNM ✓ | Defines managed objects for the Internet Group Management Protocol (IGMP), covering interface configuration and the multicast group membership cache. |
| IMA-MIB IPNM ✓ | Defines managed objects for Inverse Multiplexing for ATM (IMA), which aggregates multiple T1/E1 physical links into a single higher-bandwidth ATM logical link. |
| INTEGRATED-SERVICES-MIB IPNM ✓ | Defines managed objects for the Integrated Services model, covering interface attributes and resource allocation by reservation protocols such as RSVP. |
| INTEL-LAN-ADAPTERS-MIB | Intel LAN adapter MIB providing SNMP objects for monitoring Intel Ethernet network interface card statistics and configuration. |
| INTEL-LAN-ADAPTERS-MIB-2 | Intel LAN adapter version 2 MIB providing enhanced SNMP monitoring objects for Intel Ethernet NIC performance and diagnostics. |
| INTEL-LAN-ADAPTERS-MIB-3 | Intel LAN adapter version 3 MIB providing further enhanced SNMP objects for Intel Ethernet NIC teaming and advanced features. |
| INTEL-LAN-ADAPTERS-MIB-4 | Intel LAN adapter version 4 MIB providing the latest SNMP management objects for Intel Ethernet NIC configuration and statistics. |
| INTELETHEREXPRESSTMPRO100BLANADAPTER-MIB | Intel EtherExpress PRO/100 BLA (Blade) LAN adapter MIB providing SNMP objects for blade network interface card statistics. |
| IPOA-MIB IPNM ✓ | Defines managed objects for Classical IP and ARP over ATM, supporting the management of IP-over-ATM interfaces and address resolution. |
| IPV6-MIB IPNM ✓ | Defines managed objects for basic management of IPv6 entities, including the IPv6 General group for IPv6 interfaces and address management. |
| IPV6-TC IPNM ✓ | Defines IPv6-related textual conventions including IPv6 addresses, address prefixes, and interface identifiers for use in IPv6 network management MIBs. |
| ITOUCH-ETHERNET-MIB | iTouch Ethernet MIB providing SNMP objects for Ethernet interface statistics and configuration on iTouch networking devices. |
| JUNIPER-IF-MIB | Defines extended interface managed objects for Juniper Networks devices, supplementing the standard IF-MIB with vendor-specific attributes. |
| LAG-MIB | IEEE 802.3ad Link Aggregation Group (LAG) MIB for managing LACP-based link bundles, member port states, and aggregator parameters. |
| LANART-AGENT | LANART Corporation agent MIB defining top-level management objects for LANART network connectivity equipment. |
| LANART-MIB | LANART Corporation MIB for managing LANART network equipment including repeaters and network interface devices. |
| LANCAST-MIB | MIB from Lancast Inc. for managing port and device status on its media converters and network equipment. |
| MAU-MIB IPNM ✓ | Defines managed objects for IEEE 802.3 Medium Attachment Units (MAUs), providing link type, speed, duplex mode, and auto-negotiation information for Ethernet ports. |
| MDS-IF-LN-MIB | GE MDS licensed narrowband radio interface MIB defining signal quality, frequency, and link statistics for GE MDS narrowband radios. |
| MDS-IF-LW-MIB | GE MDS licensed wideband radio interface MIB providing RF performance and link management objects for GE MDS wideband radios. |
| MDS-IF-NX-MIB | GE MDS NX-series radio interface MIB defining wireless link performance and configuration objects for GE MDS NX platform devices. |
| MPLS-L3VPN-STD-MIB IPNM ✓ | Manages MPLS/BGP Layer 3 Virtual Private Networks (L3VPNs), including VRF configuration, routing, and associated interface bindings. |
| MPLS-LSR-MIB IPNM ✓ | Defines managed objects for MPLS Label Switching Routers, modeling incoming-to-outgoing label mappings on MPLS-enabled interfaces. |
| MPLS-LSR-STD-MIB IPNM ✓ | Manages MPLS Label Switching Router (LSR) functions, modeling incoming-to-outgoing label mappings via cross-connect entries on MPLS-enabled interfaces (RFC 3813). |
| MSIPRIP2-MIB IPNM ✓ | Microsoft MIB for managing RIP Version 2 routing protocol on Windows systems, including interface configuration and statistics. |
| NAT-MIB IPNM ✓ | Manages Network Address Translator (NAT) devices, covering NAT session bindings, address/port mappings, and per-interface NAT statistics. |
| OSPF-MIB IPNM ✓ | Defines managed objects for managing the Open Shortest Path First (OSPF) routing protocol, including areas, interfaces, neighbors, and link-state database information. |
| OSPFV3-MIB IPNM ✓ | Defines managed objects for managing OSPFv3, the version of OSPF designed for IPv6 networks, covering areas, interfaces, neighbors, and the link-state database. |
| PerfHist-TC-MIB IPNM ✓ | Defines textual conventions for 15-minute and 24-hour performance history counting used in telecommunications interface MIBs. |
| POWER-ETHERNET-MIB IPNM ✓ | Defines managed objects for managing IEEE 802.3af Power over Ethernet (PoE) Power Sourcing Equipment (PSE), including per-port power allocation and status. |
| PPP-IP-NCP-MIB IPNM ✓ | Defines managed objects for the PPP IP Network Control Protocol, providing IP-layer information and configuration for each PPP link. |
| PPP-LCP-MIB IPNM ✓ | Defines managed objects for the PPP Link Control Protocol (LCP), including link statistics counters and LCP option configuration for PPP interfaces. |
| PW-TDM-MIB IPNM ✓ | Defines managed objects for managing pseudowire encapsulation of TDM circuits (T1, E1, T3, E3, NxDS0) over packet-switched networks. |
| RFC1213-MIB IPNM ✓ | Defines MIB-II, the core set of managed objects for network management of TCP/IP-based devices, organized into groups including System, Interfaces, IP, ICMP, TCP, UDP, and SNMP. |
| RIPv2-MIB IPNM ✓ | Defines managed objects for managing the Routing Information Protocol version 2 (RIPv2), including interface configuration and peer status information. |
| RS-232-MIB IPNM ✓ | Defines managed objects for RS-232-like hardware character port interfaces, including asynchronous and synchronous serial ports. |
| SCSI-MIB IPNM ✓ | Manages Small Computer System Interface (SCSI) entities independent of the interconnect layer, covering SCSI instances, devices, ports, and logical units. |
| SNMP-REPEATER-MIB IPNM ✓ | Defines managed objects for monitoring and managing IEEE 802.3 repeater (hub) devices, including port statistics and operational status. |
| SONET-MIB IPNM ✓ | Defines managed objects for managing SONET/SDH interfaces, including line, section, and path-level configuration and performance monitoring. |
| SOURCE-ROUTING-MIB IPNM ✓ | Defines managed objects for source routing bridges used in Token Ring networks. |
| TOKEN-RING-RMON-MIB IPNM ✓ | Extends the RMON MIB with Token Ring-specific statistics, history, ring station monitoring, and source routing statistics for IEEE 802.5 networks. |
| VDSL-LINE-MIB IPNM ✓ | Manages Very High Speed DSL (VDSL) line interfaces, providing configuration and monitoring of VDSL physical-layer parameters (RFC 3728). |
| VDSL2-LINE-MIB IPNM ✓ | Manages VDSL2 line interfaces per ITU-T G.993.2, also applicable to ADSL, ADSL2, and ADSL2+ interfaces for unified xDSL management (RFC 5650). |
| VDSL2-LINE-TC-MIB IPNM ✓ | Defines textual conventions for managing VDSL2 interfaces, also applicable to ADSL, ADSL2, and ADSL2+ management. |