ALCOMA-MIB

All MIBs › ALCOMA-MIB

Category: Network Interfaces

Description: ALCOMA point-to-point microwave link MIB for managing radio link parameters, modulation, and signal statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCOMA-MIB?

ALCOMA-MIB is a vendor-specific MIB from Alcoma, a manufacturer of point-to-point microwave radio links, used to manage and monitor its microwave link products. It exposes data organized around radio link supervision, configuration, status, and historical statistics, covering signal-level and power parameters such as receive level, transmit power, and inter-site link status. It is explicitly used to monitor the hardware status of the radio equipment - received signal level (alLRX-Level), transmit power (alLTX-PWR), and general link/hardware status and alarms (alLStatus, alLHistory) are critical indicators of microwave link health and equipment degradation. As a proprietary microwave radio MIB it shows no apparent dependency on other standard MIBs beyond generic SNMP framework conventions. It is typically deployed on Alcoma point-to-point microwave radio terminals used in wireless backhaul links for telecom and enterprise networks. Engineers can download the ALCOMA-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCOMA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcoma point-to-point microwave radio link terminals

Monitoring Examples

An admin would poll alLRX-Level and alLTX-PWR to track the received signal strength and transmit power of a microwave link, where a drop in RX level could indicate a misaligned antenna, fog/rain fade, or equipment fault. alLStatus and alLHistory provide current and historical link status/alarm records useful for diagnosing intermittent link outages. alLSupervisor and alLConfiguration expose supervisory and configuration parameters for the radio hardware, such as those grouped under alLIAISL for inter-site link supervision.

What Can Be Monitored

receive signal level
transmit power
link status
link history/alarms
inter-site link supervision parameters

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
aisFromLineAlarmOff	1.3.6.1.4.1.12140.0.18
aisFromLineAlarmOn	1.3.6.1.4.1.12140.0.17
aisToLineAlarmOff	1.3.6.1.4.1.12140.0.20
aisToLineAlarmOn	1.3.6.1.4.1.12140.0.19
aisToPdhAlarmOff	1.3.6.1.4.1.12140.0.22
aisToPdhAlarmOn	1.3.6.1.4.1.12140.0.21
INT alAIS1	1.3.6.1.4.1.12140.1.1.2.9.3	INTEGER	read-only	AIS to line 1.
INT alAISL1	1.3.6.1.4.1.12140.1.1.2.9.4	INTEGER	read-only	AIS from line 1.
INT alCA	1.3.6.1.4.1.12140.1.1.1.4	INTEGER	read-only	Non-standard command activate.
alcoma	1.3.6.1.4.1.12140
INT alEHW	1.3.6.1.4.1.12140.1.1.1.1	INTEGER	read-only	Hardware error.
INT alESL	1.3.6.1.4.1.12140.1.1.1.3	INTEGER	read-only	Signal error on lines.
INT alESR	1.3.6.1.4.1.12140.1.1.1.2	INTEGER	read-only	Signal error in radio.
INT alILOSS1	1.3.6.1.4.1.12140.1.1.2.9.2	INTEGER	read-only	Ignore LOSS on line 1.
alL_General	1.3.6.1.4.1.12140.1.1.2.1
alL_IDU	1.3.6.1.4.1.12140.1.1.2.5
alL_Line1	1.3.6.1.4.1.12140.1.1.2.9
alL_Line10	1.3.6.1.4.1.12140.1.1.2.18
alL_Line11	1.3.6.1.4.1.12140.1.1.2.19
alL_Line12	1.3.6.1.4.1.12140.1.1.2.20
alL_Line2	1.3.6.1.4.1.12140.1.1.2.10
alL_Line3	1.3.6.1.4.1.12140.1.1.2.11
alL_Line4	1.3.6.1.4.1.12140.1.1.2.12
alL_Line5	1.3.6.1.4.1.12140.1.1.2.13
alL_Line6	1.3.6.1.4.1.12140.1.1.2.14
alL_Line7	1.3.6.1.4.1.12140.1.1.2.15
alL_Line8	1.3.6.1.4.1.12140.1.1.2.16
alL_Line9	1.3.6.1.4.1.12140.1.1.2.17
alL_Modem	1.3.6.1.4.1.12140.1.1.2.3
alL_MUX	1.3.6.1.4.1.12140.1.1.2.6
alL_ODU	1.3.6.1.4.1.12140.1.1.2.2
alL_PDH1	1.3.6.1.4.1.12140.1.1.2.7
alL_Supply	1.3.6.1.4.1.12140.1.1.2.4
INT alLAIS10	1.3.6.1.4.1.12140.1.1.2.18.3	INTEGER	read-only	AIS to line 10.
INT alLAIS11	1.3.6.1.4.1.12140.1.1.2.19.3	INTEGER	read-only	AIS to line 11.
INT alLAIS12	1.3.6.1.4.1.12140.1.1.2.20.3	INTEGER	read-only	AIS to line 12.
INT alLAIS2	1.3.6.1.4.1.12140.1.1.2.10.3	INTEGER	read-only	AIS to line 2.
INT alLAIS3	1.3.6.1.4.1.12140.1.1.2.11.3	INTEGER	read-only	AIS to line 3.
INT alLAIS4	1.3.6.1.4.1.12140.1.1.2.12.3	INTEGER	read-only	AIS to line 4.
INT alLAIS5	1.3.6.1.4.1.12140.1.1.2.13.3	INTEGER	read-only	AIS to line 5.
INT alLAIS6	1.3.6.1.4.1.12140.1.1.2.14.3	INTEGER	read-only	AIS to line 6.
INT alLAIS7	1.3.6.1.4.1.12140.1.1.2.15.3	INTEGER	read-only	AIS to line 7.
INT alLAIS8	1.3.6.1.4.1.12140.1.1.2.16.3	INTEGER	read-only	AIS to line 8.
INT alLAIS9	1.3.6.1.4.1.12140.1.1.2.17.3	INTEGER	read-only	AIS to line 9.
INT alLAISL10	1.3.6.1.4.1.12140.1.1.2.18.4	INTEGER	read-only	AIS from line 10.
INT alLAISL11	1.3.6.1.4.1.12140.1.1.2.19.4	INTEGER	read-only	AIS from line 11.
INT alLAISL12	1.3.6.1.4.1.12140.1.1.2.20.4	INTEGER	read-only	AIS from line 12.
INT alLAISL2	1.3.6.1.4.1.12140.1.1.2.10.4	INTEGER	read-only	AIS from line 2.
INT alLAISL3	1.3.6.1.4.1.12140.1.1.2.11.4	INTEGER	read-only	AIS from line 3.
INT alLAISL4	1.3.6.1.4.1.12140.1.1.2.12.4	INTEGER	read-only	AIS from line 4.
INT alLAISL5	1.3.6.1.4.1.12140.1.1.2.13.4	INTEGER	read-only	AIS from line 5.
INT alLAISL6	1.3.6.1.4.1.12140.1.1.2.14.4	INTEGER	read-only	AIS from line 6.
INT alLAISL7	1.3.6.1.4.1.12140.1.1.2.15.4	INTEGER	read-only	AIS from line 7.
INT alLAISL8	1.3.6.1.4.1.12140.1.1.2.16.4	INTEGER	read-only	AIS from line 8.
INT alLAISL9	1.3.6.1.4.1.12140.1.1.2.17.4	INTEGER	read-only	AIS from line 9.
INT alLAISPDH	1.3.6.1.4.1.12140.1.1.2.7.2	INTEGER	read-only	AIS to PDH1 frame.
STR alLast_Message	1.3.6.1.4.1.12140.1.1.4.1	DisplayString	read-only	Message giving more detailed information on change of alarms status.
INT alLBattery	1.3.6.1.4.1.12140.1.1.2.5.3	INTEGER	read-only	RAM backup battery voltage.
INT alLBER_10E4	1.3.6.1.4.1.12140.1.1.2.6.2	INTEGER	read-only	BER > 10E-4.
INT alLBER_10E6	1.3.6.1.4.1.12140.1.1.2.6.1	INTEGER	read-only	BER > 10E-6.
INT alLCommIDU	1.3.6.1.4.1.12140.1.1.2.5.4	INTEGER	read-only	Communication status with blocks of IDU.
INT alLCommRMT	1.3.6.1.4.1.12140.1.1.2.5.5	INTEGER	read-only	Communication status with remote station.
INT alLConfiguration	1.3.6.1.4.1.12140.1.1.2.1.2	INTEGER	read-only	IDU configuration.
INT alLCurrent_ODU	1.3.6.1.4.1.12140.1.1.2.4.4	INTEGER	read-only	ODU current range.
INT alLEEPROM	1.3.6.1.4.1.12140.1.1.2.5.1	INTEGER	read-only	EEPROM memory status.
INT alLFrame	1.3.6.1.4.1.12140.1.1.2.6.3	INTEGER	read-only	Frame LOSS.
INT alLHistory	1.3.6.1.4.1.12140.1.1.2.1.4	INTEGER	read-only	History alarm status.
INT alLIAISL	1.3.6.1.4.1.12140.1.1.2.1.5	INTEGER	read-only	Automatic AIS ignored.
INT alLILEVPWR	1.3.6.1.4.1.12140.1.1.2.1.6	INTEGER	read-only	Low RX or TX level alarms ignored.
INT alLILOSS10	1.3.6.1.4.1.12140.1.1.2.18.2	INTEGER	read-only	Ignore LOSS on line 10.
INT alLILOSS11	1.3.6.1.4.1.12140.1.1.2.19.2	INTEGER	read-only	Ignore LOSS on line 11.
INT alLILOSS12	1.3.6.1.4.1.12140.1.1.2.20.2	INTEGER	read-only	Ignore LOSS on line 12.
INT alLILOSS2	1.3.6.1.4.1.12140.1.1.2.10.2	INTEGER	read-only	Ignore LOSS on line 2.
INT alLILOSS3	1.3.6.1.4.1.12140.1.1.2.11.2	INTEGER	read-only	Ignore LOSS on line 3.
INT alLILOSS4	1.3.6.1.4.1.12140.1.1.2.12.2	INTEGER	read-only	Ignore LOSS on line 4.
INT alLILOSS5	1.3.6.1.4.1.12140.1.1.2.13.2	INTEGER	read-only	Ignore LOSS on line 5.
INT alLILOSS6	1.3.6.1.4.1.12140.1.1.2.14.2	INTEGER	read-only	Ignore LOSS on line 6.
INT alLILOSS7	1.3.6.1.4.1.12140.1.1.2.15.2	INTEGER	read-only	Ignore LOSS on line 7.
INT alLILOSS8	1.3.6.1.4.1.12140.1.1.2.16.2	INTEGER	read-only	Ignore LOSS on line 8.
INT alLILOSS9	1.3.6.1.4.1.12140.1.1.2.17.2	INTEGER	read-only	Ignore LOSS on line 9.
INT alLInput	1.3.6.1.4.1.12140.1.1.2.4.5	INTEGER	read-only	Input voltage low.
INT alLLB1	1.3.6.1.4.1.12140.1.1.2.9.5	INTEGER	read-only	Line loopback on line 1.
INT alLLLB10	1.3.6.1.4.1.12140.1.1.2.18.5	INTEGER	read-only	Line loopback on line 10.
INT alLLLB11	1.3.6.1.4.1.12140.1.1.2.19.5	INTEGER	read-only	Line loopback on line 11.
INT alLLLB12	1.3.6.1.4.1.12140.1.1.2.20.5	INTEGER	read-only	Line loopback on line 12.
INT alLLLB2	1.3.6.1.4.1.12140.1.1.2.10.5	INTEGER	read-only	Line loopback on line 2.
INT alLLLB3	1.3.6.1.4.1.12140.1.1.2.11.5	INTEGER	read-only	Line loopback on line 3.
INT alLLLB4	1.3.6.1.4.1.12140.1.1.2.12.5	INTEGER	read-only	Line loopback on line 4.
INT alLLLB5	1.3.6.1.4.1.12140.1.1.2.13.5	INTEGER	read-only	Line loopback on line 5.
INT alLLLB6	1.3.6.1.4.1.12140.1.1.2.14.5	INTEGER	read-only	Line loopback on line 6.
INT alLLLB7	1.3.6.1.4.1.12140.1.1.2.15.5	INTEGER	read-only	Line loopback on line 7.
INT alLLLB8	1.3.6.1.4.1.12140.1.1.2.16.5	INTEGER	read-only	Line loopback on line 8.
INT alLLLB9	1.3.6.1.4.1.12140.1.1.2.17.5	INTEGER	read-only	Line loopback on line 9.
INT alLLLBPDH	1.3.6.1.4.1.12140.1.1.2.7.3	INTEGER	read-only	Line loopback on PDH1 frame.
INT alLLOSS10	1.3.6.1.4.1.12140.1.1.2.18.1	INTEGER	read-only	LOSS on line 10.
INT alLLOSS11	1.3.6.1.4.1.12140.1.1.2.19.1	INTEGER	read-only	LOSS on line 11.
INT alLLOSS12	1.3.6.1.4.1.12140.1.1.2.20.1	INTEGER	read-only	LOSS on line 12.
INT alLLOSS2	1.3.6.1.4.1.12140.1.1.2.10.1	INTEGER	read-only	LOSS on line 2.
INT alLLOSS3	1.3.6.1.4.1.12140.1.1.2.11.1	INTEGER	read-only	LOSS on line 3.
INT alLLOSS4	1.3.6.1.4.1.12140.1.1.2.12.1	INTEGER	read-only	LOSS on line 4.
INT alLLOSS5	1.3.6.1.4.1.12140.1.1.2.13.1	INTEGER	read-only	LOSS on line 5.
INT alLLOSS6	1.3.6.1.4.1.12140.1.1.2.14.1	INTEGER	read-only	LOSS on line 6.
INT alLLOSS7	1.3.6.1.4.1.12140.1.1.2.15.1	INTEGER	read-only	LOSS on line 7.
INT alLLOSS8	1.3.6.1.4.1.12140.1.1.2.16.1	INTEGER	read-only	LOSS on line 8.
INT alLLOSS9	1.3.6.1.4.1.12140.1.1.2.17.1	INTEGER	read-only	LOSS on line 9.
INT alLMode_TX	1.3.6.1.4.1.12140.1.1.2.2.3	INTEGER	read-only	Mode of power control.
INT alLODU_LB	1.3.6.1.4.1.12140.1.1.2.2.4	INTEGER	read-only	ODU line-loopback.
INT alLOSS1	1.3.6.1.4.1.12140.1.1.2.9.1	INTEGER	read-only	LOSS on line 1.
INT alLPDHFrame	1.3.6.1.4.1.12140.1.1.2.7.1	INTEGER	read-only	PDH1 frame LOSS.
INT alLQuality	1.3.6.1.4.1.12140.1.1.2.3.1	INTEGER	read-only	Quality of 4-level modulation.
INT alLRAM	1.3.6.1.4.1.12140.1.1.2.5.2	INTEGER	read-only	RAM memory status.
INT alLRLB10	1.3.6.1.4.1.12140.1.1.2.18.6	INTEGER	read-only	Radio loopback on line 10.
INT alLRLB11	1.3.6.1.4.1.12140.1.1.2.19.6	INTEGER	read-only	Radio loopback on line 11.
INT alLRLB12	1.3.6.1.4.1.12140.1.1.2.20.6	INTEGER	read-only	Radio loopback on line 12.
INT alLRLB2	1.3.6.1.4.1.12140.1.1.2.10.6	INTEGER	read-only	Radio loopback on line 2.
INT alLRLB3	1.3.6.1.4.1.12140.1.1.2.11.6	INTEGER	read-only	Radio loopback on line 3.
INT alLRLB4	1.3.6.1.4.1.12140.1.1.2.12.6	INTEGER	read-only	Radio loopback on line 4.
INT alLRLB5	1.3.6.1.4.1.12140.1.1.2.13.6	INTEGER	read-only	Radio loopback on line 5.
INT alLRLB6	1.3.6.1.4.1.12140.1.1.2.14.6	INTEGER	read-only	Radio loopback on line 6.
INT alLRLB7	1.3.6.1.4.1.12140.1.1.2.15.6	INTEGER	read-only	Radio loopback on line 7.
INT alLRLB8	1.3.6.1.4.1.12140.1.1.2.16.6	INTEGER	read-only	Radio loopback on line 8.
INT alLRLB9	1.3.6.1.4.1.12140.1.1.2.17.6	INTEGER	read-only	Radio loopback on line 9.
INT alLRLBPDH	1.3.6.1.4.1.12140.1.1.2.7.4	INTEGER	read-only	Radio loopback on PDH1 frame.
INT alLRX_Level	1.3.6.1.4.1.12140.1.1.2.2.1	INTEGER	read-only	Signal receiver level.
INT alLStatus	1.3.6.1.4.1.12140.1.1.2.1.3	INTEGER	read-only	Station alarm status.
INT alLSupervisor	1.3.6.1.4.1.12140.1.1.2.1.1	INTEGER	read-only	Active supervisor.
INT alLTX_PWR	1.3.6.1.4.1.12140.1.1.2.2.2	INTEGER	read-only	Transmitter power level.
INT alLVoltage_24V	1.3.6.1.4.1.12140.1.1.2.4.3	INTEGER	read-only	Voltage 24V low.
INT alLVoltage_5V	1.3.6.1.4.1.12140.1.1.2.4.1	INTEGER	read-only	Voltage 5V high.
INT alLVoltage_5Vor15V	1.3.6.1.4.1.12140.1.1.2.4.2	INTEGER	read-only	Voltage 5V or 15V low.
alMP	1.3.6.1.4.1.12140.2
INT alMPActiveACM	1.3.6.1.4.1.12140.2.4.7	INTEGER	read-only	Activation ACM.
INT alMPAIS1	1.3.6.1.4.1.12140.2.8.3	INTEGER	read-only	AIS to line 1.
INT alMPAISL1	1.3.6.1.4.1.12140.2.8.4	INTEGER	read-only	AIS from line 1.
STR alMPBER	1.3.6.1.4.1.12140.2.7.1	DisplayString	read-only	Value of BER.
INT alMPBER_10E4	1.3.6.1.4.1.12140.2.7.3	INTEGER	read-only	BER > 10E-4.
INT alMPBER_10E6	1.3.6.1.4.1.12140.2.7.2	INTEGER	read-only	BER > 10E-6.
U32 alMPByteRX2	1.3.6.1.4.1.12140.2.9.8	Unsigned32	read-only	Received bytes count of line 2.
U32 alMPByteRX3	1.3.6.1.4.1.12140.2.10.8	Unsigned32	read-only	Received bytes count of line 3.
U32 alMPByteRX4	1.3.6.1.4.1.12140.2.11.8	Unsigned32	read-only	Received bytes count of line 4.
U32 alMPByteTX2	1.3.6.1.4.1.12140.2.9.10	Unsigned32	read-only	Transmitted bytes count of line 2.
U32 alMPByteTX3	1.3.6.1.4.1.12140.2.10.10	Unsigned32	read-only	Transmitted bytes count of line 3.
U32 alMPByteTX4	1.3.6.1.4.1.12140.2.11.10	Unsigned32	read-only	Transmitted bytes count of line 4.
INT alMPCA	1.3.6.1.4.1.12140.2.1.4	INTEGER	read-only	Non-standard command activate.
U32 alMPCollision2	1.3.6.1.4.1.12140.2.9.12	Unsigned32	read-only	Collision count of line 2.
U32 alMPCollision3	1.3.6.1.4.1.12140.2.10.12	Unsigned32	read-only	Collision count of line 3.
U32 alMPCollision4	1.3.6.1.4.1.12140.2.11.12	Unsigned32	read-only	Collision count of line 4.
INT alMPCommRMT	1.3.6.1.4.1.12140.2.6.3	INTEGER	read-only	Communication status with remote station.
INT alMPConfiguration	1.3.6.1.4.1.12140.2.2.2	INTEGER	read-only	IDU configuration.
INT alMPEEPROM	1.3.6.1.4.1.12140.2.6.1	INTEGER	read-only	EEPROM memory status.
INT alMPEHW	1.3.6.1.4.1.12140.2.1.1	INTEGER	read-only	Hardware error.
U32 alMPError2	1.3.6.1.4.1.12140.2.9.11	Unsigned32	read-only	Error count of line 2.
U32 alMPError3	1.3.6.1.4.1.12140.2.10.11	Unsigned32	read-only	Error count of line 3.
U32 alMPError4	1.3.6.1.4.1.12140.2.11.11	Unsigned32	read-only	Error count of line 4.
INT alMPESL	1.3.6.1.4.1.12140.2.1.3	INTEGER	read-only	Signal error on lines.
INT alMPESR	1.3.6.1.4.1.12140.2.1.2	INTEGER	read-only	Signal error in radio.
INT alMPFlow2	1.3.6.1.4.1.12140.2.9.6	INTEGER	read-only	Flow control of line 2.
INT alMPFlow3	1.3.6.1.4.1.12140.2.10.6	INTEGER	read-only	Flow control of line 3.
INT alMPFlow4	1.3.6.1.4.1.12140.2.11.6	INTEGER	read-only	Flow control of line 4.
INT alMPFrame	1.3.6.1.4.1.12140.2.7.4	INTEGER	read-only	Frame LOSS.
alMPGeneral	1.3.6.1.4.1.12140.2.2
INT alMPHistory	1.3.6.1.4.1.12140.2.2.4	INTEGER	read-only	History alarm status.
INT alMPIAISL	1.3.6.1.4.1.12140.2.2.5	INTEGER	read-only	Automatic AIS ignored.
INT alMPILEVPWR	1.3.6.1.4.1.12140.2.2.6	INTEGER	read-only	Low RX or TX level alarms ignored.
INT alMPILOSS1	1.3.6.1.4.1.12140.2.8.2	INTEGER	read-only	Ignore LOSS on line 1.
INT alMPILOSS2	1.3.6.1.4.1.12140.2.9.2	INTEGER	read-only	Ignore LOSS on line 2.
INT alMPILOSS3	1.3.6.1.4.1.12140.2.10.2	INTEGER	read-only	Ignore LOSS on line 3.
INT alMPILOSS4	1.3.6.1.4.1.12140.2.11.2	INTEGER	read-only	Ignore LOSS on line 4.
INT alMPInput	1.3.6.1.4.1.12140.2.5.1	INTEGER	read-only	Input voltage low.
alMPLine1	1.3.6.1.4.1.12140.2.8
alMPLine2	1.3.6.1.4.1.12140.2.9
alMPLine3	1.3.6.1.4.1.12140.2.10
alMPLine4	1.3.6.1.4.1.12140.2.11
INT alMPLink2	1.3.6.1.4.1.12140.2.9.3	INTEGER	read-only	Link status line 2.
INT alMPLink3	1.3.6.1.4.1.12140.2.10.3	INTEGER	read-only	Link status line 3.
INT alMPLink4	1.3.6.1.4.1.12140.2.11.3	INTEGER	read-only	Link status line 4.
INT alMPLLB1	1.3.6.1.4.1.12140.2.8.5	INTEGER	read-only	Line loopback on line 1.
INT alMPLOSS1	1.3.6.1.4.1.12140.2.8.1	INTEGER	read-only	LOSS on line 1.
INT alMPLOSS2	1.3.6.1.4.1.12140.2.9.1	INTEGER	read-only	LOSS on line 2.
INT alMPLOSS3	1.3.6.1.4.1.12140.2.10.1	INTEGER	read-only	LOSS on line 3.
INT alMPLOSS4	1.3.6.1.4.1.12140.2.11.1	INTEGER	read-only	LOSS on line 4.
INT alMPMode_TX	1.3.6.1.4.1.12140.2.3.7	INTEGER	read-only	Mode of power control.
alMPModem	1.3.6.1.4.1.12140.2.4
alMPMUX	1.3.6.1.4.1.12140.2.7
alMPODU	1.3.6.1.4.1.12140.2.3
INT alMPODU_LB	1.3.6.1.4.1.12140.2.3.8	INTEGER	read-only	ODU line-loopback.
U32 alMPPktRX2	1.3.6.1.4.1.12140.2.9.7	Unsigned32	read-only	Received packets count of line 2.
U32 alMPPktRX3	1.3.6.1.4.1.12140.2.10.7	Unsigned32	read-only	Received packets count of line 3.
U32 alMPPktRX4	1.3.6.1.4.1.12140.2.11.7	Unsigned32	read-only	Received packets count of line 4.
U32 alMPPktTX2	1.3.6.1.4.1.12140.2.9.9	Unsigned32	read-only	Transmitted packets count of line 2.
U32 alMPPktTX3	1.3.6.1.4.1.12140.2.10.9	Unsigned32	read-only	Transmitted packets count of line 3.
U32 alMPPktTX4	1.3.6.1.4.1.12140.2.11.9	Unsigned32	read-only	Transmitted packets count of line 4.
INT alMPQAM	1.3.6.1.4.1.12140.2.4.6	INTEGER	read-only	Low transnission rate of link.
INT alMPQuality	1.3.6.1.4.1.12140.2.4.1	INTEGER	read-only	Quality of signal.
INT alMPQualityAlrm	1.3.6.1.4.1.12140.2.4.3	INTEGER	read-only	Alarm quality of signal.
INT alMPRAM	1.3.6.1.4.1.12140.2.6.2	INTEGER	read-only	RAM memory status.
INT alMPRate	1.3.6.1.4.1.12140.2.4.5	INTEGER	read-only	Transmision rate of link.
alMPRDG	1.3.6.1.4.1.12140.2.6
INT alMPRLB1	1.3.6.1.4.1.12140.2.8.6	INTEGER	read-only	Radio loopback on line 1.
INT alMPRX_Level	1.3.6.1.4.1.12140.2.3.4	INTEGER	read-only	Signal receiver level [dB].
INT alMPRX_LevelAlrm	1.3.6.1.4.1.12140.2.3.6	INTEGER	read-only	Alarm signal receiver level.
STR alMPSNR	1.3.6.1.4.1.12140.2.4.2	DisplayString	read-only	Signal noise ratio.
INT alMPSNRAlrm	1.3.6.1.4.1.12140.2.4.4	INTEGER	read-only	Alarm signal noise ratio.
INT alMPSpeed2	1.3.6.1.4.1.12140.2.9.4	INTEGER	read-only	Speed of line 2.
INT alMPSpeed3	1.3.6.1.4.1.12140.2.10.4	INTEGER	read-only	Speed of line 3.
INT alMPSpeed4	1.3.6.1.4.1.12140.2.11.4	INTEGER	read-only	Speed of line 4.
INT alMPStatus	1.3.6.1.4.1.12140.2.2.3	INTEGER	read-only	Station alarm status.
INT alMPStatusACM	1.3.6.1.4.1.12140.2.4.8	INTEGER	read-only	Actual ACM status.
alMPStatusLED	1.3.6.1.4.1.12140.2.1
INT alMPSupervisor	1.3.6.1.4.1.12140.2.2.1	INTEGER	read-only	Active supervisor.
alMPSupply	1.3.6.1.4.1.12140.2.5
INT alMPTemperature	1.3.6.1.4.1.12140.2.3.9	INTEGER	read-only	Temperature ODU.
STR alMPTuneRX	1.3.6.1.4.1.12140.2.3.2	DisplayString	read-only	Receiver frequency [MHz].
STR alMPTuneTX	1.3.6.1.4.1.12140.2.3.1	DisplayString	read-only	Transmitter frequency [MHz].
INT alMPTX_PWR	1.3.6.1.4.1.12140.2.3.3	INTEGER	read-only	Transmitter power level [dB].
INT alMPTX_PWRAlrm	1.3.6.1.4.1.12140.2.3.5	INTEGER	read-only	Alarm transmitter power level.
INT alMPType2	1.3.6.1.4.1.12140.2.9.5	INTEGER	read-only	Communication type of line 2.
INT alMPType3	1.3.6.1.4.1.12140.2.10.5	INTEGER	read-only	Communication type of line 3.
INT alMPType4	1.3.6.1.4.1.12140.2.11.5	INTEGER	read-only	Communication type of line 4.
alNMS	1.3.6.1.4.1.12140.1.2
alR_General	1.3.6.1.4.1.12140.1.1.3.1
alR_IDU	1.3.6.1.4.1.12140.1.1.3.5
alR_Line1	1.3.6.1.4.1.12140.1.1.3.9
alR_Line10	1.3.6.1.4.1.12140.1.1.3.18
alR_Line11	1.3.6.1.4.1.12140.1.1.3.19
alR_Line12	1.3.6.1.4.1.12140.1.1.3.20
alR_Line2	1.3.6.1.4.1.12140.1.1.3.10
alR_Line3	1.3.6.1.4.1.12140.1.1.3.11
alR_Line4	1.3.6.1.4.1.12140.1.1.3.12
alR_Line5	1.3.6.1.4.1.12140.1.1.3.13
alR_Line6	1.3.6.1.4.1.12140.1.1.3.14
alR_Line7	1.3.6.1.4.1.12140.1.1.3.15
alR_Line8	1.3.6.1.4.1.12140.1.1.3.16
alR_Line9	1.3.6.1.4.1.12140.1.1.3.17
alR_Modem	1.3.6.1.4.1.12140.1.1.3.3
alR_MUX	1.3.6.1.4.1.12140.1.1.3.6
alR_ODU	1.3.6.1.4.1.12140.1.1.3.2
alR_PDH1	1.3.6.1.4.1.12140.1.1.3.7
alR_Supply	1.3.6.1.4.1.12140.1.1.3.4
alRADIO_RELAY_LINK	1.3.6.1.4.1.12140.1.1
INT alRAIS1	1.3.6.1.4.1.12140.1.1.3.9.3	INTEGER	read-only	AIS to line 1.
INT alRAIS10	1.3.6.1.4.1.12140.1.1.3.18.3	INTEGER	read-only	AIS to line 10.
INT alRAIS11	1.3.6.1.4.1.12140.1.1.3.19.3	INTEGER	read-only	AIS to line 11.
INT alRAIS12	1.3.6.1.4.1.12140.1.1.3.20.3	INTEGER	read-only	AIS to line 12.
INT alRAIS2	1.3.6.1.4.1.12140.1.1.3.10.3	INTEGER	read-only	AIS to line 2.
INT alRAIS3	1.3.6.1.4.1.12140.1.1.3.11.3	INTEGER	read-only	AIS to line 3.
INT alRAIS4	1.3.6.1.4.1.12140.1.1.3.12.3	INTEGER	read-only	AIS to line 4.
INT alRAIS5	1.3.6.1.4.1.12140.1.1.3.13.3	INTEGER	read-only	AIS to line 5.
INT alRAIS6	1.3.6.1.4.1.12140.1.1.3.14.3	INTEGER	read-only	AIS to line 6.
INT alRAIS7	1.3.6.1.4.1.12140.1.1.3.15.3	INTEGER	read-only	AIS to line 7.
INT alRAIS8	1.3.6.1.4.1.12140.1.1.3.16.3	INTEGER	read-only	AIS to line 8.
INT alRAIS9	1.3.6.1.4.1.12140.1.1.3.17.3	INTEGER	read-only	AIS to line 9.
INT alRAISL1	1.3.6.1.4.1.12140.1.1.3.9.4	INTEGER	read-only	AIS from line 1.
INT alRAISL10	1.3.6.1.4.1.12140.1.1.3.18.4	INTEGER	read-only	AIS from line 10.
INT alRAISL11	1.3.6.1.4.1.12140.1.1.3.19.4	INTEGER	read-only	AIS from line 11.
INT alRAISL12	1.3.6.1.4.1.12140.1.1.3.20.4	INTEGER	read-only	AIS from line 12.
INT alRAISL2	1.3.6.1.4.1.12140.1.1.3.10.4	INTEGER	read-only	AIS from line 2.
INT alRAISL3	1.3.6.1.4.1.12140.1.1.3.11.4	INTEGER	read-only	AIS from line 3.
INT alRAISL4	1.3.6.1.4.1.12140.1.1.3.12.4	INTEGER	read-only	AIS from line 4.
INT alRAISL5	1.3.6.1.4.1.12140.1.1.3.13.4	INTEGER	read-only	AIS from line 5.
INT alRAISL6	1.3.6.1.4.1.12140.1.1.3.14.4	INTEGER	read-only	AIS from line 6.
INT alRAISL7	1.3.6.1.4.1.12140.1.1.3.15.4	INTEGER	read-only	AIS from line 7.
INT alRAISL8	1.3.6.1.4.1.12140.1.1.3.16.4	INTEGER	read-only	AIS from line 8.
INT alRAISL9	1.3.6.1.4.1.12140.1.1.3.17.4	INTEGER	read-only	AIS from line 9.
INT alRAISPDH	1.3.6.1.4.1.12140.1.1.3.7.2	INTEGER	read-only	AIS to frame PDH1.
INT alRBattery	1.3.6.1.4.1.12140.1.1.3.5.3	INTEGER	read-only	RAM backup battery voltage.
INT alRBER_10E4	1.3.6.1.4.1.12140.1.1.3.6.2	INTEGER	read-only	BER > 10E-4.
INT alRBER_10E6	1.3.6.1.4.1.12140.1.1.3.6.1	INTEGER	read-only	BER > 10E-6.
INT alRCommIDU	1.3.6.1.4.1.12140.1.1.3.5.4	INTEGER	read-only	Communication status with blocks of IDU.
INT alRCommRMT	1.3.6.1.4.1.12140.1.1.3.5.5	INTEGER	read-only	Communication status with remote station.
INT alRConfiguration	1.3.6.1.4.1.12140.1.1.3.1.2	INTEGER	read-only	IDU configuration.
INT alRCurrent_ODU	1.3.6.1.4.1.12140.1.1.3.4.4	INTEGER	read-only	ODU current range.
INT alREEPROM	1.3.6.1.4.1.12140.1.1.3.5.1	INTEGER	read-only	EEPROM memory status.
INT alRFrame	1.3.6.1.4.1.12140.1.1.3.6.3	INTEGER	read-only	Frame LOSS.
INT alRHistory	1.3.6.1.4.1.12140.1.1.3.1.4	INTEGER	read-only	History alarm status.
INT alRIAISL	1.3.6.1.4.1.12140.1.1.3.1.5	INTEGER	read-only	Automatic AIS ignored.
INT alRILEVPWR	1.3.6.1.4.1.12140.1.1.3.1.6	INTEGER	read-only	Low RX or TX level alarms ignored.
INT alRILOSS1	1.3.6.1.4.1.12140.1.1.3.9.2	INTEGER	read-only	Ignore LOSS on line 1.
INT alRILOSS10	1.3.6.1.4.1.12140.1.1.3.18.2	INTEGER	read-only	Ignore LOSS on line 10.
INT alRILOSS11	1.3.6.1.4.1.12140.1.1.3.19.2	INTEGER	read-only	Ignore LOSS on line 11.
INT alRILOSS12	1.3.6.1.4.1.12140.1.1.3.20.2	INTEGER	read-only	Ignore LOSS on line 12.
INT alRILOSS2	1.3.6.1.4.1.12140.1.1.3.10.2	INTEGER	read-only	Ignore LOSS on line 2.
INT alRILOSS3	1.3.6.1.4.1.12140.1.1.3.11.2	INTEGER	read-only	Ignore LOSS on line 3.
INT alRILOSS4	1.3.6.1.4.1.12140.1.1.3.12.2	INTEGER	read-only	Ignore LOSS on line 4.
INT alRILOSS5	1.3.6.1.4.1.12140.1.1.3.13.2	INTEGER	read-only	Ignore LOSS on line 5.
INT alRILOSS6	1.3.6.1.4.1.12140.1.1.3.14.2	INTEGER	read-only	Ignore LOSS on line 6.
INT alRILOSS7	1.3.6.1.4.1.12140.1.1.3.15.2	INTEGER	read-only	Ignore LOSS on line 7.
INT alRILOSS8	1.3.6.1.4.1.12140.1.1.3.16.2	INTEGER	read-only	Ignore LOSS on line 8.
INT alRILOSS9	1.3.6.1.4.1.12140.1.1.3.17.2	INTEGER	read-only	Ignore LOSS on line 9.
INT alRInput	1.3.6.1.4.1.12140.1.1.3.4.5	INTEGER	read-only	Input voltage low.
INT alRLB1	1.3.6.1.4.1.12140.1.1.2.9.6	INTEGER	read-only	Radio loopback on line 1.
INT alRLLB1	1.3.6.1.4.1.12140.1.1.3.9.5	INTEGER	read-only	Line loopback on line 1.
INT alRLLB10	1.3.6.1.4.1.12140.1.1.3.18.5	INTEGER	read-only	Line loopback on line 10.
INT alRLLB11	1.3.6.1.4.1.12140.1.1.3.19.5	INTEGER	read-only	Line loopback on line 11.
INT alRLLB12	1.3.6.1.4.1.12140.1.1.3.20.5	INTEGER	read-only	Line loopback on line 12.
INT alRLLB2	1.3.6.1.4.1.12140.1.1.3.10.5	INTEGER	read-only	Line loopback on line 2.
INT alRLLB3	1.3.6.1.4.1.12140.1.1.3.11.5	INTEGER	read-only	Line loopback on line 3.
INT alRLLB4	1.3.6.1.4.1.12140.1.1.3.12.5	INTEGER	read-only	Line loopback on line 4.
INT alRLLB5	1.3.6.1.4.1.12140.1.1.3.13.5	INTEGER	read-only	Line loopback on line 5.
INT alRLLB6	1.3.6.1.4.1.12140.1.1.3.14.5	INTEGER	read-only	Line loopback on line 6.
INT alRLLB7	1.3.6.1.4.1.12140.1.1.3.15.5	INTEGER	read-only	Line loopback on line 7.
INT alRLLB8	1.3.6.1.4.1.12140.1.1.3.16.5	INTEGER	read-only	Line loopback on line 8.
INT alRLLB9	1.3.6.1.4.1.12140.1.1.3.17.5	INTEGER	read-only	Line loopback on line 9.
INT alRLLBPDH	1.3.6.1.4.1.12140.1.1.3.7.3	INTEGER	read-only	Line loopback on PDH1 frame.
INT alRLOSS1	1.3.6.1.4.1.12140.1.1.3.9.1	INTEGER	read-only	LOSS on line 1.
INT alRLOSS10	1.3.6.1.4.1.12140.1.1.3.18.1	INTEGER	read-only	LOSS on line 10.
INT alRLOSS11	1.3.6.1.4.1.12140.1.1.3.19.1	INTEGER	read-only	LOSS on line 11.
INT alRLOSS12	1.3.6.1.4.1.12140.1.1.3.20.1	INTEGER	read-only	LOSS on line 12.
INT alRLOSS2	1.3.6.1.4.1.12140.1.1.3.10.1	INTEGER	read-only	LOSS on line 2.
INT alRLOSS3	1.3.6.1.4.1.12140.1.1.3.11.1	INTEGER	read-only	LOSS on line 3.
INT alRLOSS4	1.3.6.1.4.1.12140.1.1.3.12.1	INTEGER	read-only	LOSS on line 4.
INT alRLOSS5	1.3.6.1.4.1.12140.1.1.3.13.1	INTEGER	read-only	LOSS on line 5.
INT alRLOSS6	1.3.6.1.4.1.12140.1.1.3.14.1	INTEGER	read-only	LOSS on line 6.
INT alRLOSS7	1.3.6.1.4.1.12140.1.1.3.15.1	INTEGER	read-only	LOSS on line 7.
INT alRLOSS8	1.3.6.1.4.1.12140.1.1.3.16.1	INTEGER	read-only	LOSS on line 8.
INT alRLOSS9	1.3.6.1.4.1.12140.1.1.3.17.1	INTEGER	read-only	LOSS on line 9.
INT alRMode_TX	1.3.6.1.4.1.12140.1.1.3.2.3	INTEGER	read-only	Mode of power control.
INT alRODU_LB	1.3.6.1.4.1.12140.1.1.3.2.4	INTEGER	read-only	ODU line-loopback.
INT alRPDHFrame	1.3.6.1.4.1.12140.1.1.3.7.1	INTEGER	read-only	PDH1 frame LOSS.
INT alRQuality	1.3.6.1.4.1.12140.1.1.3.3.1	INTEGER	read-only	Quality of 4-level modulation.
INT alRRAM	1.3.6.1.4.1.12140.1.1.3.5.2	INTEGER	read-only	RAM memory status.
INT alRRLB1	1.3.6.1.4.1.12140.1.1.3.9.6	INTEGER	read-only	Radio loopback on line 1.
INT alRRLB10	1.3.6.1.4.1.12140.1.1.3.18.6	INTEGER	read-only	Radio loopback on line 10.
INT alRRLB11	1.3.6.1.4.1.12140.1.1.3.19.6	INTEGER	read-only	Radio loopback on line 11.
INT alRRLB12	1.3.6.1.4.1.12140.1.1.3.20.6	INTEGER	read-only	Radio loopback on line 12.
INT alRRLB2	1.3.6.1.4.1.12140.1.1.3.10.6	INTEGER	read-only	Radio loopback on line 2.
INT alRRLB3	1.3.6.1.4.1.12140.1.1.3.11.6	INTEGER	read-only	Radio loopback on line 3.
INT alRRLB4	1.3.6.1.4.1.12140.1.1.3.12.6	INTEGER	read-only	Radio loopback on line 4.
INT alRRLB5	1.3.6.1.4.1.12140.1.1.3.13.6	INTEGER	read-only	Radio loopback on line 5.
INT alRRLB6	1.3.6.1.4.1.12140.1.1.3.14.6	INTEGER	read-only	Radio loopback on line 6.
INT alRRLB7	1.3.6.1.4.1.12140.1.1.3.15.6	INTEGER	read-only	Radio loopback on line 7.
INT alRRLB8	1.3.6.1.4.1.12140.1.1.3.16.6	INTEGER	read-only	Radio loopback on line 8.
INT alRRLB9	1.3.6.1.4.1.12140.1.1.3.17.6	INTEGER	read-only	Radio loopback on line 9.
INT alRRLBPDH	1.3.6.1.4.1.12140.1.1.3.7.4	INTEGER	read-only	Radio loopback on PDH1 frame.
alRRLTrap	1.3.6.1.4.1.12140.1.1.4
INT alRRX_Level	1.3.6.1.4.1.12140.1.1.3.2.1	INTEGER	read-only	Signal receiver level.
INT alRStatus	1.3.6.1.4.1.12140.1.1.3.1.3	INTEGER	read-only	Station alarm status.
INT alRSupervisor	1.3.6.1.4.1.12140.1.1.3.1.1	INTEGER	read-only	Active supervisor.
INT alRTX_PWR	1.3.6.1.4.1.12140.1.1.3.2.2	INTEGER	read-only	Transmitter power level.
INT alRVoltage_24V	1.3.6.1.4.1.12140.1.1.3.4.3	INTEGER	read-only	Voltage 24V low.
INT alRVoltage_5V	1.3.6.1.4.1.12140.1.1.3.4.1	INTEGER	read-only	Voltage 5V high.
INT alRVoltage_5Vor15V	1.3.6.1.4.1.12140.1.1.3.4.2	INTEGER	read-only	Voltage 5V or 15V low.
alStatusLED	1.3.6.1.4.1.12140.1.1.1
ber4EAlarmOff	1.3.6.1.4.1.12140.0.14
ber4EAlarmOn	1.3.6.1.4.1.12140.0.13
ber6EAlarmOff	1.3.6.1.4.1.12140.0.12
ber6EAlarmOn	1.3.6.1.4.1.12140.0.11
generalERR	1.3.6.1.4.1.12140.0.4
generalOFF	1.3.6.1.4.1.12140.0.1
generalOK	1.3.6.1.4.1.12140.0.2
generalWAR	1.3.6.1.4.1.12140.0.3
inputSupplyAlarmOff	1.3.6.1.4.1.12140.0.16
inputSupplyAlarmOn	1.3.6.1.4.1.12140.0.15
STR lineID	1.3.6.1.4.1.12140.1.2.1.7	DisplayString	read-only	Line ID number.
local_station	1.3.6.1.4.1.12140.1.1.2
lossAtFrameAlarmOff	1.3.6.1.4.1.12140.0.28
lossAtFrameAlarmOn	1.3.6.1.4.1.12140.0.27
lossAtLineAlarmOff	1.3.6.1.4.1.12140.0.24
lossAtLineAlarmOn	1.3.6.1.4.1.12140.0.23
lossAtPdhAlarmOff	1.3.6.1.4.1.12140.0.26
lossAtPdhAlarmOn	1.3.6.1.4.1.12140.0.25
STR mgmtGWaddr	1.3.6.1.4.1.12140.1.2.1.6	DisplayString	read-only	IP address of Management Gateway.
STR mwRouteID	1.3.6.1.4.1.12140.1.2.1.3	DisplayString	read-only	Identification of microwave route.
STR nmsTrapTime	1.3.6.1.4.1.12140.1.2.1.1	DisplayString	read-only	Time of alarms scan.
products	1.3.6.1.4.1.12140.1
receiverLowAlarmOff	1.3.6.1.4.1.12140.0.6
receiverLowAlarmOn	1.3.6.1.4.1.12140.0.5
remote_station	1.3.6.1.4.1.12140.1.1.3
signalQualityAlarmOff	1.3.6.1.4.1.12140.0.10
signalQualityAlarmOn	1.3.6.1.4.1.12140.0.9
STR stationID	1.3.6.1.4.1.12140.1.2.1.4	DisplayString	read-only	Identification of Radio Relay Link station.
STR stationName	1.3.6.1.4.1.12140.1.2.1.5	DisplayString	read-only	Name of Radio Relay Link station.
transmitterLowAlarmOff	1.3.6.1.4.1.12140.0.8
transmitterLowAlarmOn	1.3.6.1.4.1.12140.0.7
trapParam	1.3.6.1.4.1.12140.1.2.1
traps	1.3.6.1.4.1.12140.0
STR trapSequence	1.3.6.1.4.1.12140.1.2.1.2	DisplayString	read-only	Number of trap sequence.

RFC description

Manages ALCOMA radio relay link and network management systems with status indicators and configuration controls.

Start monitoring Alcoma microwave radio link terminals with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCOMA-MIB

What Is ALCOMA-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description