BASEBRDD-MIB-MIB

All MIBs › BASEBRDD-MIB-MIB

Category: Network Interfaces, VLAN and Bridging

Description: Provides supplementary bridging and routing management objects extending the BASEBRDD-MIB module.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BASEBRDD-MIB-MIB?

BASEBRDD-MIB-MIB is a supplementary bridging/routing extension that layers Dell/DMTF-style hardware inventory and environmental objects (manufacturer, product, version, serial number, and temperature probes) onto the base BASEBRDD-MIB bridging module. Its objects mix DMTF component identification data (dMTFComponentIDTable) with Dell-specific temperature probe monitoring (dellTemperatureProbeTable), suggesting it is used on Dell-branded network appliances that also expose bridging functionality. The clear hardware-monitoring role here is environmental: dellTemperatureProbeState reports the health/state of onboard temperature sensors, letting an operator detect overheating conditions, while the component ID table provides serial number and version data useful for asset and firmware-version tracking. It explicitly depends on and extends the base BASEBRDD-MIB bridging module, and follows DMTF standard MIF/component-ID conventions for its inventory fields. It is deployed on Dell network appliances or embedded systems management boards where bridging and basic hardware health reporting coexist. Engineers can download the BASEBRDD-MIB-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BASEBRDD-MIB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell network appliances
DMTF-compliant managed devices

Monitoring Examples

An operator would poll dellTemperatureProbeTable/dellTemperatureProbeEntry for dellTemperatureProbeState to detect an over-temperature or sensor-fault condition, using tempParentIndexAtt1 to associate the probe with its parent component. dMTFComponentIDTable/dMTFComponentIDEntry fields like serialNumberAtt4 and versionAtt3 would be polled during inventory audits to confirm firmware/hardware revision levels across deployed units.

What Can Be Monitored

temperature probe state
component serial number
hardware/firmware version
manufacturer and product identity

Imported Objects

From DMTF-DMI-MIB

DmiDate
DmiInteger64
dmiCompId	OBJECT-TYPE
dmiEventAssociatedGroup	OBJECT-TYPE
dmiEventDateTime	OBJECT-TYPE
dmiEventSeverity	OBJECT-TYPE
dmiEventStateKey	OBJECT-TYPE
dmiEventSubSystem	OBJECT-TYPE
dmiEventSystem	OBJECT-TYPE

From HOST-RESOURCES-MIB

InternationalDisplayString

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
enterprises

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

Counter64

OIDs

OID symbolic	OID numeric	Type	Access	Description
dmtf	1.3.6.1.4.1.412
dmtfStdMifs	1.3.6.1.4.1.412.2
dmtfServiceLayerMIF	1.3.6.1.4.1.412.2.1
dMTFComponentIDTable	1.3.6.1.4.1.412.2.1.1		not-accessible	This group defines the attributes common to all components. This group is required.
dMTFComponentIDEntry	1.3.6.1.4.1.412.2.1.1.1		not-accessible	This group defines the attributes common to all components. This group is required.
STR manufacturerAtt1	1.3.6.1.4.1.412.2.1.1.1.1	DmiDisplaystring	read-only	Manufacturer of this system.
STR productAtt2	1.3.6.1.4.1.412.2.1.1.1.2	DmiDisplaystring	read-only	Product name for this system.
STR versionAtt3	1.3.6.1.4.1.412.2.1.1.1.3	DmiDisplaystring	read-only	Version number of this system.
STR serialNumberAtt4	1.3.6.1.4.1.412.2.1.1.1.4	DmiDisplaystring	read-only	Serial number for this system.
DMI installationAtt5	1.3.6.1.4.1.412.2.1.1.1.5	DmiDate	read-only	The time and date when this component was installed.
INT verifyAtt6	1.3.6.1.4.1.412.2.1.1.1.6	INTEGER	read-only	A code that provides a level of verification that the component is still installed and working.
dmtfSystemsMIF	1.3.6.1.4.1.412.2.4
dMTFGeneralInformationTable	1.3.6.1.4.1.412.2.4.1		not-accessible	This group defines general information about this system.
dMTFGeneralInformationEntry	1.3.6.1.4.1.412.2.4.1.1		not-accessible	This group defines general information about this system.
STR systemNameAtt1	1.3.6.1.4.1.412.2.4.1.1.1	DmiDisplaystring	read-write	A name to identify this system.
STR systemLocationAtt2	1.3.6.1.4.1.412.2.4.1.1.2	DmiDisplaystring	read-write	The physical location of this system.
STR systemPrimaryUserNameAtt3	1.3.6.1.4.1.412.2.4.1.1.3	DmiDisplaystring	read-write	The name of the primary user or owner of this system.
STR systemPrimaryUserPhoneAtt4	1.3.6.1.4.1.412.2.4.1.1.4	DmiDisplaystring	read-write	The phone number of the primary user of this system.
DMI systemBootupTimeAtt5	1.3.6.1.4.1.412.2.4.1.1.5	DmiDate	read-only	The time at which the system was last booted.
DMI systemDateTimeAtt6	1.3.6.1.4.1.412.2.4.1.1.6	DmiDate	read-write	The actual system date and time.
dMTFOperatingSystemTable	1.3.6.1.4.1.412.2.4.2		not-accessible	This group defines general information about operating systems installed on this system.
dMTFOperatingSystemEntry	1.3.6.1.4.1.412.2.4.2.1		not-accessible	This group defines general information about operating systems installed on this system.
INT dMTFOperatingSystemState	1.3.6.1.4.1.412.2.4.2.1.0	INTEGER	read-write
NUM operatingSystemIndexAtt1	1.3.6.1.4.1.412.2.4.2.1.1	DmiInteger	read-only	The index into the operating system table.
STR operatingSystemNameAtt2	1.3.6.1.4.1.412.2.4.2.1.2	DmiDisplaystring	read-only	The name of this operating system.
STR operatingSystemVersionAtt3	1.3.6.1.4.1.412.2.4.2.1.3	DmiDisplaystring	read-only	The version number of this operating system.
INT primaryOperatingSystemAtt4	1.3.6.1.4.1.412.2.4.2.1.4	INTEGER	read-only	If true, this is the primary operating system.
INT operatingSystemBootDeviceStorageTypeAtt5	1.3.6.1.4.1.412.2.4.2.1.5	INTEGER	read-only	An index into the Disks Table to indicate the device from which this operating system was booted. To fully access the Disks Table, this index must be combined with the attribute Boot Device Index.
NUM operatingSystemBootDeviceIndexAtt6	1.3.6.1.4.1.412.2.4.2.1.6	DmiInteger	read-only	An index into the Disks Table.
NUM operatingSystemBootPartitionIndexAtt7	1.3.6.1.4.1.412.2.4.2.1.7	DmiInteger	read-only	An index into the Partition table indicating the partition from which this operating system booted.
STR operatingSystemDescriptionAtt8	1.3.6.1.4.1.412.2.4.2.1.8	DmiDisplaystring	read-only	A description of this operating system.
dMTFSystemBIOSTable	1.3.6.1.4.1.412.2.4.3		not-accessible	This group defines the attributes for the System BIOS.
dMTFSystemBIOSEntry	1.3.6.1.4.1.412.2.4.3.1		not-accessible	This group defines the attributes for the System BIOS.
INT dMTFSystemBIOSState	1.3.6.1.4.1.412.2.4.3.1.0	INTEGER	read-write
NUM bIOSIndexAtt1	1.3.6.1.4.1.412.2.4.3.1.1	DmiInteger	read-only	The index into the system BIOS table.
STR bIOSManufacturerAtt2	1.3.6.1.4.1.412.2.4.3.1.2	DmiDisplaystring	read-only	The name of the company that wrote this System BIOS.
STR bIOSVersionAtt3	1.3.6.1.4.1.412.2.4.3.1.3	DmiDisplaystring	read-only	The version number or version string of this BIOS.
NUM bIOSROMSizeAtt4	1.3.6.1.4.1.412.2.4.3.1.4	DmiInteger	read-only	The physical size of this BIOS ROM device in kilobytes.
NUM bIOSStartingAddressAtt5	1.3.6.1.4.1.412.2.4.3.1.5	DmiInteger64	read-only	The starting physical address for the memory which the BIOS occupies.
NUM bIOSEndingAddressAtt6	1.3.6.1.4.1.412.2.4.3.1.6	DmiInteger64	read-only	The ending physical address for the memory which the BIOS occupies.
STR bIOSLoaderVersionAtt7	1.3.6.1.4.1.412.2.4.3.1.7	DmiDisplaystring	read-only	The BIOS flash loader version number or string.
DMI bIOSReleaseDateAtt8	1.3.6.1.4.1.412.2.4.3.1.8	DmiDate	read-only	The BIOS release date.
INT primaryBIOSAtt9	1.3.6.1.4.1.412.2.4.3.1.9	INTEGER	read-only	If true, this is the primary System BIOS.
dMTFProcessorTable	1.3.6.1.4.1.412.2.4.5		not-accessible	This group defines the attributes for each and every processor installed in this system.
dMTFProcessorEntry	1.3.6.1.4.1.412.2.4.5.1		not-accessible	This group defines the attributes for each and every processor installed in this system.
INT dMTFProcessorState	1.3.6.1.4.1.412.2.4.5.1.0	INTEGER	read-write
NUM processorIndexAtt1	1.3.6.1.4.1.412.2.4.5.1.1	DmiInteger	read-only	An index into the processor table.
INT processorTypeAtt2	1.3.6.1.4.1.412.2.4.5.1.2	INTEGER	read-only	The type of processor currently in the system.
INT processorFamilyAtt3	1.3.6.1.4.1.412.2.4.5.1.3	INTEGER	read-only	The family of processors to which this processor belongs.
STR processorVersionInformationAtt4	1.3.6.1.4.1.412.2.4.5.1.4	DmiDisplaystring	read-only	The version number or string for this processor.
NUM maximumSpeedAtt5	1.3.6.1.4.1.412.2.4.5.1.5	DmiInteger	read-only	The maximum processor speed supported by this system in MHz.
NUM currentSpeedAtt6	1.3.6.1.4.1.412.2.4.5.1.6	DmiInteger	read-only	The current speed (in MHz) of this processor.
INT processorUpgradeAtt7	1.3.6.1.4.1.412.2.4.5.1.7	INTEGER	read-only	The method by which this processor can be upgraded, if upgrades are supported.
NUM fRUGroupIndexAtt8	1.3.6.1.4.1.412.2.4.5.1.8	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU.
NUM operationalGroupIndexAtt9	1.3.6.1.4.1.412.2.4.5.1.9	DmiInteger	read-only	The index into the Operational State Table for this device if applicable.
NUM level1CacheIndexAtt10	1.3.6.1.4.1.412.2.4.5.1.10	DmiInteger	read-only	An index into the System Cache table that identifies the entry that describes the L1 cache for this processor. If more than one processor points to the same cache entry this means they share that cache.
NUM level2CacheIndexAtt11	1.3.6.1.4.1.412.2.4.5.1.11	DmiInteger	read-only	An index into the System Cache table that identifies the entry that describes the L2 cache for this processor If more than one processor points to the same cache entry this means they share that cache.
NUM level3CacheIndexAtt12	1.3.6.1.4.1.412.2.4.5.1.12	DmiInteger	read-only	An index into the System Cache table that identifies the entry that describes the L3 cache for this processor. If more than one processor points to the same cache entry this means they share that cache.
dMTFSystemCacheTable	1.3.6.1.4.1.412.2.4.9		not-accessible	This group defines the attributes for different System Caches installed in this system.
dMTFSystemCacheEntry	1.3.6.1.4.1.412.2.4.9.1		not-accessible	This group defines the attributes for different System Caches installed in this system.
INT dMTFSystemCacheState	1.3.6.1.4.1.412.2.4.9.1.0	INTEGER	read-write
NUM systemCacheIndexAtt1	1.3.6.1.4.1.412.2.4.9.1.1	DmiInteger	read-only	An index into the System Cache table.
INT systemCacheLevelAtt2	1.3.6.1.4.1.412.2.4.9.1.2	INTEGER	read-only	Is this the primary System Cache, or a subsidiary cache?
NUM systemCacheSpeedAtt3	1.3.6.1.4.1.412.2.4.9.1.3	DmiInteger	read-only	The speed of this System Cache module in nanoseconds.
NUM systemCacheSizeAtt4	1.3.6.1.4.1.412.2.4.9.1.4	DmiInteger	read-only	The size of this System Cache module in kilobytes.
INT systemCacheWritePolicyAtt5	1.3.6.1.4.1.412.2.4.9.1.5	INTEGER	read-only	Is this a write-back or a write-through cache?
INT systemCacheErrorCorrectionAtt6	1.3.6.1.4.1.412.2.4.9.1.6	INTEGER	read-only	The error correction scheme supported by this cache component.
NUM fRUGroupIndexAtt7_1	1.3.6.1.4.1.412.2.4.9.1.7	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU.
NUM operationalGroupIndexAtt8_2	1.3.6.1.4.1.412.2.4.9.1.8	DmiInteger	read-only	The index into the Operational State Table for this device.
INT systemCacheTypeAtt9	1.3.6.1.4.1.412.2.4.9.1.9	INTEGER	read-only	This defines the system cache type.
NUM lineSizeAtt10	1.3.6.1.4.1.412.2.4.9.1.10	DmiInteger	read-only	The size, in bytes, of a single cache bucket or line.
INT volatilityAtt11	1.3.6.1.4.1.412.2.4.9.1.11	INTEGER	read-only	This defines the volatility of the cache.
INT replacementPolicyAtt12	1.3.6.1.4.1.412.2.4.9.1.12	INTEGER	read-only	The algorithm used by the cache to determine which cache lines or buckets should be re-used.
INT readPolicyAtt13	1.3.6.1.4.1.412.2.4.9.1.13	INTEGER	read-only	The policy that shall be employed by the cache for handling read requests.
NUM flushTimerAtt14	1.3.6.1.4.1.412.2.4.9.1.14	DmiInteger	read-only	The maximum amount of time, in seconds, dirty lines or buckets may remain in the cache before they are flushed. A value of zero indicated that a cache flush is not controlled by a flushing timer.
INT associativityAtt15	1.3.6.1.4.1.412.2.4.9.1.15	INTEGER	read-only	This defines the system cache associativity (direct-mapped, 2-way, 4-way, etc).
dMTFParallelPortsTable	1.3.6.1.4.1.412.2.4.10		not-accessible	This group defines the attributes for parallel ports in this system.
dMTFParallelPortsEntry	1.3.6.1.4.1.412.2.4.10.1		not-accessible	This group defines the attributes for parallel ports in this system.
INT dMTFParallelPortsState	1.3.6.1.4.1.412.2.4.10.1.0	INTEGER	read-write
NUM parallelPortIndexAtt1	1.3.6.1.4.1.412.2.4.10.1.1	DmiInteger	read-only	An index into the parallel ports table.
NUM parallelBaseIOAddressAtt2	1.3.6.1.4.1.412.2.4.10.1.2	DmiInteger64	read-only	Base I/O address for this parallel port.
NUM iRQUsedAtt3_1	1.3.6.1.4.1.412.2.4.10.1.3	DmiInteger	read-only	IRQ number that is being used by this parallel port.
STR logicalNameAtt4_1	1.3.6.1.4.1.412.2.4.10.1.4	DmiDisplaystring	read-only	The logical name of the I/O device on this parallel port, under this operating environment.
INT connectorTypeAtt5_1	1.3.6.1.4.1.412.2.4.10.1.5	INTEGER	read-only	The connector used to interface with the I/O device on this parallel port.
INT connectorPinoutAtt6	1.3.6.1.4.1.412.2.4.10.1.6	INTEGER	read-only	The pinout used by the I/O device on this parallel port.
INT dMASupportAtt7	1.3.6.1.4.1.412.2.4.10.1.7	INTEGER	read-only	If true, DMA is supported.
NUM parallelPortCapabilitiesAtt8	1.3.6.1.4.1.412.2.4.10.1.8	DmiInteger	read-only	Capabilities of this parallel port. This is a bit field mask with the bits defined as follows: Bit 0 (2^0) set = XT/AT compatible, Bit 1 (2^1) set = PS/2 compatible, Bit 2 (2^2) set = ECP, Bit 3 (2^3) set = EPP, Bit 4 (2^4) set = PC-98, Bit 5 (2^5) set = PC-98-Hireso, Bit 6 (2^6) set = PC-H98
NUM operationalGroupIndexAtt9_1	1.3.6.1.4.1.412.2.4.10.1.9	DmiInteger	read-only	The index into the Operational State Table for this device.
INT parallelPortSecuritySettingsAtt10	1.3.6.1.4.1.412.2.4.10.1.10	INTEGER	read-only	Attribute describing the current hardware security settings on this device
dMTFSerialPortsTable	1.3.6.1.4.1.412.2.4.11		not-accessible	This group defines the attributes for serial ports in this system.
dMTFSerialPortsEntry	1.3.6.1.4.1.412.2.4.11.1		not-accessible	This group defines the attributes for serial ports in this system.
INT dMTFSerialPortsState	1.3.6.1.4.1.412.2.4.11.1.0	INTEGER	read-write
NUM serialPortIndexAtt1	1.3.6.1.4.1.412.2.4.11.1.1	DmiInteger	read-only	An index into the serial ports table.
NUM serialBaseIOAddressAtt2	1.3.6.1.4.1.412.2.4.11.1.2	DmiInteger64	read-only	Base I/O address for this serial port.
NUM iRQUsedAtt3	1.3.6.1.4.1.412.2.4.11.1.3	DmiInteger	read-only	IRQ number that is being used by this serial port.
STR logicalNameAtt4	1.3.6.1.4.1.412.2.4.11.1.4	DmiDisplaystring	read-only	The logical name of this serial port under this operating environment.
INT connectorTypeAtt5	1.3.6.1.4.1.412.2.4.11.1.5	INTEGER	read-only	The connector used to interface with the I/O device on this serial port.
NUM maximumSpeedAtt6	1.3.6.1.4.1.412.2.4.11.1.6	DmiInteger	read-only	Maximum transfer speed of the device on this serial port in bits per second.
INT serialPortCapabilitiesAtt7	1.3.6.1.4.1.412.2.4.11.1.7	INTEGER	read-only	The capabilities of this Serial port.
NUM operationalGroupIndexAtt8_1	1.3.6.1.4.1.412.2.4.11.1.8	DmiInteger	read-only	The index into the Operational State Table for this device.
INT serialPortSecuritySettingsAtt9	1.3.6.1.4.1.412.2.4.11.1.9	INTEGER	read-only	Attribute describing the current hardware security settings on this device
dMTFPowerSupplyTable	1.3.6.1.4.1.412.2.4.16		not-accessible	This group defines various attributes for power supplies in this system.
NTF dMTFPowerSupplyEvt1	1.3.6.1.4.1.412.2.4.16.0.1			powerSupplyStatusChange
NTF dMTFPowerSupplyEvt2	1.3.6.1.4.1.412.2.4.16.0.2			powerControlRequest
dMTFPowerSupplyEntry	1.3.6.1.4.1.412.2.4.16.1		not-accessible	This group defines various attributes for power supplies in this system.
INT dMTFPowerSupplyState	1.3.6.1.4.1.412.2.4.16.1.0	INTEGER	read-write
NUM powerSupplyIndexAtt1	1.3.6.1.4.1.412.2.4.16.1.1	DmiInteger	read-only	The index number of the current power supply.
NUM fRUGroupIndexAtt2_1	1.3.6.1.4.1.412.2.4.16.1.2	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU.
NUM operationalGroupIndexAtt3_1	1.3.6.1.4.1.412.2.4.16.1.3	DmiInteger	read-only	The index into the Operational State table for this device.
NUM powerUnitIndexAtt4	1.3.6.1.4.1.412.2.4.16.1.4	DmiInteger	read-only	This is the ID of the Power Unit (logical power supply) to which this Power Supply belongs. This value matches up with the Power Unit Table Index attribute defined in the Power Unit Global Table.
INT powerSupplyTypeAtt5	1.3.6.1.4.1.412.2.4.16.1.5	INTEGER	read-only	This attribute describes the type of Power Supply, e.g. Linear, Switching, Battery, etc.
STR inputVoltageCapabilityDescriptionAtt6	1.3.6.1.4.1.412.2.4.16.1.6	DmiDisplaystring	read-only	An expanded description of the Input Voltage Capability for this Power Supply.
NUM range1InputVoltageLowAtt7	1.3.6.1.4.1.412.2.4.16.1.7	DmiInteger	read-only	The low voltage of Input Voltage Range 1 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown'.
NUM range1InputVoltageHighAtt8	1.3.6.1.4.1.412.2.4.16.1.8	DmiInteger	read-only	The high voltage of Input Voltage Range 1 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown'.
NUM range1VoltageProbeIndexAtt9	1.3.6.1.4.1.412.2.4.16.1.9	DmiInteger	read-only	Index into the Voltage Probe table identifying the voltage probe monitoring this input range. 0 indicates no probe provided.
NUM range1ElectricalCurrentProbeIndexAtt10	1.3.6.1.4.1.412.2.4.16.1.10	DmiInteger	read-only	Index into the Elelctrical Current Probe table identifying the Electrical current probe monitoring this input range. 0 indicates no probe provided.
NUM range2InputVoltageLowAtt11	1.3.6.1.4.1.412.2.4.16.1.11	DmiInteger	read-only	The low voltage of Input Voltage Range 2 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown'.
NUM range2InputVoltageHighAtt12	1.3.6.1.4.1.412.2.4.16.1.12	DmiInteger	read-only	The high voltage of Input Voltage Range 2 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown'
NUM range2VoltageProbeIndexAtt13	1.3.6.1.4.1.412.2.4.16.1.13	DmiInteger	read-only	Index into the Voltage Probe table identifying the voltage probe monitoring this input range. 0 indicates no probe provided.
NUM range2CurrentProbeIndexAtt14	1.3.6.1.4.1.412.2.4.16.1.14	DmiInteger	read-only	Index into the Current Probe table identifying the current probe monitoring this input range. 0 indicates no probe provided.
INT activeInputVoltageRangeAtt15	1.3.6.1.4.1.412.2.4.16.1.15	INTEGER	read-only	The value of this attribute indicates which input voltage range of this Power Supply is currently active.
INT inputVoltageRangeSwitchingAtt16	1.3.6.1.4.1.412.2.4.16.1.16	INTEGER	read-only	This attribute describes the kind of input voltage range switching that is implemented in this power supply.
NUM range1InputFrequencyLowAtt17	1.3.6.1.4.1.412.2.4.16.1.17	DmiInteger	read-only	The frequency at the low end of this power supply's Input Frequency Range 1. A value of zero implies DC. A value of 0x80000000 denotes 'unknown'
NUM range1InputFrequencyHighAtt18	1.3.6.1.4.1.412.2.4.16.1.18	DmiInteger	read-only	The frequency at the high end of this power supply's Input Frequency Range 1. A value of zero implies DC. A value of 0x80000000 denotes 'unknown'
NUM range2InputFrequencyLowAtt19	1.3.6.1.4.1.412.2.4.16.1.19	DmiInteger	read-only	The frequency at the low end of this power supply's Input Frequency Range 2. A value of zero implies DC. A value of 0x80000000 denotes 'unknown'
NUM range2InputFrequencyHighAtt20	1.3.6.1.4.1.412.2.4.16.1.20	DmiInteger	read-only	The frequency at the high end of this power supply's Input Frequency Range 2. A value of zero implies DC. A value of 0x80000000 denotes 'unknown'
NUM totalOutputPowerAtt21	1.3.6.1.4.1.412.2.4.16.1.21	DmiInteger	read-only	This attribute value represents the total output power of this power supply in milliWatts. 0x80000000 denotes 'unknown'
INT dMTFPowerSupplyEvSys	1.3.6.1.4.1.412.2.4.16.6	INTEGER	not-accessible	The major functional aspect of the product causing the fault.
INT dMTFPowerSupplyEvSub	1.3.6.1.4.1.412.2.4.16.7	INTEGER	not-accessible	The minor functional aspect of the product causing the fault.
dMTFCoolingDeviceTable	1.3.6.1.4.1.412.2.4.17		not-accessible	This group defines various attributes for cooling devices in this system.
NTF dMTFCoolingDeviceEvt1	1.3.6.1.4.1.412.2.4.17.0.1			coolingDeviceStatusChange
NTF dMTFCoolingDeviceEvt2	1.3.6.1.4.1.412.2.4.17.0.2			temperatureFault
dMTFCoolingDeviceEntry	1.3.6.1.4.1.412.2.4.17.1		not-accessible	This group defines various attributes for cooling devices in this system.
INT dMTFCoolingDeviceState	1.3.6.1.4.1.412.2.4.17.1.0	INTEGER	read-write
NUM coolingDeviceTableIndexAtt1	1.3.6.1.4.1.412.2.4.17.1.1	DmiInteger	read-only	An index into the cooling device table.
NUM fRUGroupIndexAtt2	1.3.6.1.4.1.412.2.4.17.1.2	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU.
NUM operationalGroupIndexAtt3	1.3.6.1.4.1.412.2.4.17.1.3	DmiInteger	read-only	The index into the Operational State table for this device.
NUM coolingUnitIndexAtt4	1.3.6.1.4.1.412.2.4.17.1.4	DmiInteger	read-only	This is the ID of the Cooling Unit (logical cooling device) of which this Cooling Device is a part. This value matches up with the Cooling Unit Table Index attribute defined in the Cooling Unit Global Table.
INT coolingDeviceTypeAtt5	1.3.6.1.4.1.412.2.4.17.1.5	INTEGER	read-only	The type of Cooling Device that this is e.g. Fan, Heat Pipe, etc.
NUM temperatureProbeIndexAtt6	1.3.6.1.4.1.412.2.4.17.1.6	DmiInteger	read-only	Index into the Temperature Probe table identifying the temperatu e probe monitoring this cooling device. 0 indicates no probe provided.
INT dMTFCoolingDeviceEvSys	1.3.6.1.4.1.412.2.4.17.6	INTEGER	not-accessible	The major functional aspect of the product causing the fault.
INT dMTFCoolingDeviceEvSub	1.3.6.1.4.1.412.2.4.17.7	INTEGER	not-accessible	The minor functional aspect of the product causing the fault.
dMTFSystemSlotsTable	1.3.6.1.4.1.412.2.4.18		not-accessible	This group defines the attributes for the different system expansion slots supported in this system.
dMTFSystemSlotsEntry	1.3.6.1.4.1.412.2.4.18.1		not-accessible	This group defines the attributes for the different system expansion slots supported in this system.
INT dMTFSystemSlotsState	1.3.6.1.4.1.412.2.4.18.1.0	INTEGER	read-write
NUM slotIndexAtt1	1.3.6.1.4.1.412.2.4.18.1.1	DmiInteger	read-only	An index into the system slot table. This is the hardware ID number for each expansion slot, whether it is occupied or not (starting with 1).
NUM slotTypeAtt2	1.3.6.1.4.1.412.2.4.18.1.2	DmiInteger64	read-only	The bus type supported in this slot. This is a bit field with the following definitions: Bit 0 (2^0), if 1, it is a long-length card; if 0, it is a short-length card, Bit 1 (2^1) if set, indicates ISA, Bit 2 (2^2) indicates EISA, Bit 3 (2^3) indicates MCA, Bit 4 (2^4) indicates PCI, Bit 5 (2^5) indicates VL, Bit 6 (2^6) indicates PCMCIA, Bit 7 (2^7) refers to NuBus, Bit 8 (2^8) indicates PC-98/C20, Bit 9 (2^9) indicates PC-98/C24, Bit 10 (2^10) indicates PC-98/E, Bit 11 (2^
INT slotWidthAtt3	1.3.6.1.4.1.412.2.4.18.1.3	INTEGER	read-only	The maximum bus width of cards accepted in this slot.
INT currentUsageAtt4	1.3.6.1.4.1.412.2.4.18.1.4	INTEGER	read-only	Is this slot is currently in use?
STR slotDescriptionAtt5	1.3.6.1.4.1.412.2.4.18.1.5	DmiDisplaystring	read-only	The card currently occupying this slot.
INT slotCategoryAtt6	1.3.6.1.4.1.412.2.4.18.1.6	INTEGER	read-only	The word 'slot' is used to refer to bus slots. The last case (motherboard) refers to situations where a functional element is integrated onto, say, a motherboard and connects to a bus without a connector. It still takes up an expansion site on the bus but this is termed a 'virtual slot' as opposed to a physical slot (see the attribute 'Virtual Slot'). Virtual slots are in effect permanently occupied expansion sites. This attribute establishes which category of physical slot this table entry is defining.
INT virtualSlotAtt7	1.3.6.1.4.1.412.2.4.18.1.7	INTEGER	read-only	This attribute indicates whether this is a 'virtual slot' or not. A 'virtual slot' is an expansion site that is permanently occupied because of the level of integration of an expandable component. An example of a virtual slot is an I/O bus position taken up by a LAN controller that is integrated onto a motherboard. A slot with the 'Slot Category' of Motherboard is typically a Virtual Slot.
NUM resourceUserIDAtt8	1.3.6.1.4.1.412.2.4.18.1.8	DmiInteger	read-only	Value used to locate the rows in the System Resources 2 table for the resources associated with this slot or expansion site. 0 = 'unspecified .
dMTFFRUTable	1.3.6.1.4.1.412.2.4.29		not-accessible	A Field Replaceable Unit (FRU), is defined as a hardware component which is designed to be separately removable for replacement or repair. For the purposes of this definition, a motherboard and a fixed hard disk are FRUs, whereas a fixed hard disk platter or a chip fixed in place on the motherboard are not FRUs since they are not designed to be separately removable. Each instance within the FRU table should contain the device group and instance data for the associated hardware component.
dMTFFRUEntry	1.3.6.1.4.1.412.2.4.29.1		not-accessible	A Field Replaceable Unit (FRU), is defined as a hardware component which is designed to be separately removable for replacement or repair. For the purposes of this definition, a motherboard and a fixed hard disk are FRUs, whereas a fixed hard disk platter or a chip fixed in place on the motherboard are not FRUs since they are not designed to be separately removable. Each instance within the FRU table should contain the device group and instance data for the associated hardware component.
INT dMTFFRUState	1.3.6.1.4.1.412.2.4.29.1.0	INTEGER	read-write
NUM fRUIndexAtt1	1.3.6.1.4.1.412.2.4.29.1.1	DmiInteger	read-only	The index into the Field Replaceable Unit table.
NUM deviceGroupIndexAtt2	1.3.6.1.4.1.412.2.4.29.1.2	DmiInteger	read-only	The group ID of the group referencing this Field Replaceable Unit instance.
STR descriptionAtt3	1.3.6.1.4.1.412.2.4.29.1.3	DmiDisplaystring	read-only	A clear description of this Field Replaceable Unit.
STR manufacturerAtt4	1.3.6.1.4.1.412.2.4.29.1.4	DmiDisplaystring	read-only	The name of the company manufacturing or providing this Field Replaceable Unit.
STR modelAtt5	1.3.6.1.4.1.412.2.4.29.1.5	DmiDisplaystring	read-only	The manufacturer's model number for this Field Replaceable Unit.
STR partNumberAtt6	1.3.6.1.4.1.412.2.4.29.1.6	DmiDisplaystring	read-only	A part number by which a replacement part can be ordered for this Field Replaceable Unit.
STR fRUSerialNumberAtt7	1.3.6.1.4.1.412.2.4.29.1.7	DmiDisplaystring	read-only	The manufacturer's serial number for this Field Replaceable Unit.
STR revisionLevelAtt8	1.3.6.1.4.1.412.2.4.29.1.8	DmiDisplaystring	read-only	The revision level of this Field Replaceable Unit.
DMI warrantyStartDateAtt9	1.3.6.1.4.1.412.2.4.29.1.9	DmiDate	read-only	The start date of the service warranty for this Field Replaceabl Unit.
NUM warrantyDurationAtt10	1.3.6.1.4.1.412.2.4.29.1.10	DmiInteger	read-only	The total duration of this Field Replaceable Unit warranty in months.
STR supportPhoneNumberAtt11	1.3.6.1.4.1.412.2.4.29.1.11	DmiDisplaystring	read-only	The phone number(s) for support for this Field Replaceable Unit.
STR fRUInternetUniformResourceLocatorAtt12	1.3.6.1.4.1.412.2.4.29.1.12	DmiDisplaystring	read-only	The Internet Uniform Resource Locator string that can be used through a World Wide Web browser to obtain further information about this FRU
dMTFOperationalStateTable	1.3.6.1.4.1.412.2.4.30		not-accessible	This group provides the operational state, usage, and availabili y status,and administrative state indicators for specific Device Group instances
dMTFOperationalStateEntry	1.3.6.1.4.1.412.2.4.30.1		not-accessible	This group provides the operational state, usage, and availabili y status,and administrative state indicators for specific Device Group instances
INT dMTFOperationalStateState	1.3.6.1.4.1.412.2.4.30.1.0	INTEGER	read-write
NUM operationalStateInstanceIndexAtt1	1.3.6.1.4.1.412.2.4.30.1.1	DmiInteger	read-only	The Index into the Operational State table.
NUM deviceGroupIndexAtt2_1	1.3.6.1.4.1.412.2.4.30.1.2	DmiInteger	read-only	The group ID of the group referencing this instance.
INT operationalStatusAtt3	1.3.6.1.4.1.412.2.4.30.1.3	INTEGER	read-only	The operational status of the Device Group instance.
INT usageStateAtt4	1.3.6.1.4.1.412.2.4.30.1.4	INTEGER	read-only	The usage state of the Device Group instance.
INT availabilityStatusAtt5	1.3.6.1.4.1.412.2.4.30.1.5	INTEGER	read-only	The availability status of the Device Group instance.
INT administrativeStateAtt6	1.3.6.1.4.1.412.2.4.30.1.6	INTEGER	read-only	The administrative state of the Device Group instance.
NUM fatalErrorCountAtt7	1.3.6.1.4.1.412.2.4.30.1.7	DmiCounter	read-only	The accumulated Fatal or Non-recoverable error count for this Device Group instance.
NUM majorErrorCountAtt8	1.3.6.1.4.1.412.2.4.30.1.8	DmiCounter	read-only	The accumulated Major or Critical error count for this Device Group instance.
NUM warningErrorCountAtt9	1.3.6.1.4.1.412.2.4.30.1.9	DmiCounter	read-only	The accumulated Warning or Non-Critical error count for this Device Group instance.
INT currentErrorStatusAtt10	1.3.6.1.4.1.412.2.4.30.1.10	INTEGER	read-only	This attribute presents the current error status for this Device Group instance. The most critical error status in effect should be presented. I.e. if a part of the Device Group instance is 'Critical', while other status is 'Non-critical' then the status'Critical' should be reported.
INT devicePredictedFailureStatusAtt11	1.3.6.1.4.1.412.2.4.30.1.11	INTEGER	read-only	Enumeration describing the current Device Predicted Failure Status (e.g.: the S.M.A.R.T. status of the device).
dMTFPhysicalMemoryArrayTable	1.3.6.1.4.1.412.2.4.33		not-accessible	This group represents an array of physical memory as a collectio of one or more Memory Devices associated in sets and partitions.
NTF dMTFPhysicalMemoryArrayEvt1	1.3.6.1.4.1.412.2.4.33.0.1			memoryError
NTF dMTFPhysicalMemoryArrayEvt2	1.3.6.1.4.1.412.2.4.33.0.2			initializationFailure
dMTFPhysicalMemoryArrayEntry	1.3.6.1.4.1.412.2.4.33.1		not-accessible	This group represents an array of physical memory as a collectio of one or more Memory Devices associated in sets and partitions.
INT dMTFPhysicalMemoryArrayState	1.3.6.1.4.1.412.2.4.33.1.0	INTEGER	read-write
NUM memoryArrayTableIndexAtt1	1.3.6.1.4.1.412.2.4.33.1.1	DmiInteger	read-only	A unique number that identifies this row.
INT memoryArrayLocationAtt2	1.3.6.1.4.1.412.2.4.33.1.2	INTEGER	read-only	The physical location of the Memory Array, whether on the system board or an add-on board.
INT memoryArrayUseAtt3	1.3.6.1.4.1.412.2.4.33.1.3	INTEGER	read-only	What this Memory Array is used for.
NUM maximumMemoryCapacityAtt4	1.3.6.1.4.1.412.2.4.33.1.4	DmiInteger	read-only	The maximum memory capacity, in kilobytes, on this array. 0x80000000denotes 'unknown'.
NUM numberOfMemoryDeviceSocketsAtt5	1.3.6.1.4.1.412.2.4.33.1.5	DmiInteger	read-only	The number of SIMM slots or sockets available for Memory Devices in this array. 0x80000000 denotes 'unknown'.
NUM numberOfMemoryDeviceSocketsUsedAtt6	1.3.6.1.4.1.412.2.4.33.1.6	DmiInteger	read-only	The number of SIMM slots or sockets in use for Memory Devices in this array. 0x80000000 denotes 'unknown'.
INT memoryErrorCorrectionAtt7	1.3.6.1.4.1.412.2.4.33.1.7	INTEGER	read-only	The main hardware error correction or detection method supported by this Memory Array.
INT arrayErrorTypeAtt8	1.3.6.1.4.1.412.2.4.33.1.8	INTEGER	read-only	The type of error that is associated with the current status reported in Operational State for this Memory Array.
INT lastErrorUpdateAtt9	1.3.6.1.4.1.412.2.4.33.1.9	INTEGER	read-only	System state during which last error status was collected.
INT errorOperationAtt10	1.3.6.1.4.1.412.2.4.33.1.10	INTEGER	read-only	The memory access operation that caused the current error.
NUM errorDataSizeAtt11	1.3.6.1.4.1.412.2.4.33.1.11	DmiInteger	read-only	The size of the data transfer that caused the error, in bits. Zero indicates no error, 0x80000000 denotes 'unknown'.
STR errorDataAtt12	1.3.6.1.4.1.412.2.4.33.1.12	DmiOctetstring	read-only	Data captured during the erroneous Memory Array access. The data occupy the first n bytes of the octet string required to hold 'Error Data Size' bits of the data. Data are stored least-significant byte first.
STR vendorSyndromeAtt13	1.3.6.1.4.1.412.2.4.33.1.13	DmiOctetstring	read-only	Vendor-specific syndrome or CRC data associated with the erroneous access.
NUM errorAddressAtt14	1.3.6.1.4.1.412.2.4.33.1.14	DmiInteger64	read-only	Physical address of the error based on the addressing of the bus that the Memory Array is connected to. 0x8000 0000 0000 0000 denotes 'unknown'.
NUM errorResolutionAtt15	1.3.6.1.4.1.412.2.4.33.1.15	DmiInteger	read-only	Range in bytes that the error can be determined to be within, when an Error Address is given. 0x80000000 denotes 'unknown'.
NUM fRUGroupIndexAtt16	1.3.6.1.4.1.412.2.4.33.1.16	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU.
NUM operationalGroupIndexAtt17	1.3.6.1.4.1.412.2.4.33.1.17	DmiInteger	read-only	The index into the Operational State Table for this Memory Array. The Operational State row is used to hold the overall error count and error status for this array.
INT dMTFPhysicalMemoryArrayEvSys	1.3.6.1.4.1.412.2.4.33.6	INTEGER	not-accessible	The major functional aspect of the product causing the fault.
INT dMTFPhysicalMemoryArrayEvSub	1.3.6.1.4.1.412.2.4.33.7	INTEGER	not-accessible	The minor functional aspect of the product causing the fault.
dMTFMemoryArrayMappedAddressesTable	1.3.6.1.4.1.412.2.4.34		not-accessible	This table presents ranges of physical addresses that are mapped to a given Memory Array.
dMTFMemoryArrayMappedAddressesEntry	1.3.6.1.4.1.412.2.4.34.1		not-accessible	This table presents ranges of physical addresses that are mapped to a given Memory Array.
INT dMTFMemoryArrayMappedAddressesState	1.3.6.1.4.1.412.2.4.34.1.0	INTEGER	read-write
NUM memoryArrayMappedAddressesTableIndexAtt1	1.3.6.1.4.1.412.2.4.34.1.1	DmiInteger	read-only	A unique number that identifies this row.
NUM memoryArrayIndexAtt2	1.3.6.1.4.1.412.2.4.34.1.2	DmiInteger	read-only	The ID of the Memory Array that this address range is mapped to. Multiple address ranges may be mapped to a Memory Array.
NUM mappedRangeStartingAddressAtt3	1.3.6.1.4.1.412.2.4.34.1.3	DmiInteger	read-only	The physical starting address, in kilobytes, of a range of memory mapped to the specified Memory Array. 0x80000000 denotes 'unknown'.
NUM mappedRangeEndingAddressAtt4	1.3.6.1.4.1.412.2.4.34.1.4	DmiInteger	read-only	The physical ending address of the last kilobyte of a range of addresses mapped to the specified Memory Array. 0x80000000 denotes 'unknown'.
NUM partitionIDAtt5	1.3.6.1.4.1.412.2.4.34.1.5	DmiInteger	read-only	Identifies a Memory Partition associated with the Memory Array specified by Memory Array Table Index. 0x80000000 denotes 'unknown'.
NUM partitionWidthAtt6	1.3.6.1.4.1.412.2.4.34.1.6	DmiInteger	read-only	The number of Memory Devices that form a single row of memory for the partition. 0x80000000 denotes 'unknown'.
NUM operationalGroupIndexAtt7	1.3.6.1.4.1.412.2.4.34.1.7	DmiInteger	read-only	The index into the Operational State Table for this Memory Range. Generally, there will be a 1:1 correspondence between a mapped range and a partition. In which case, the Operational State will be for the partition as well. In the case that there is more than one mapped range for a partion, it will be necessary to check the Operational State entries for each range to determine the overall status of the partition.
dMTFMemoryDeviceTable	1.3.6.1.4.1.412.2.4.35		not-accessible	This group presents information about individual memory devices in the system. A memory device can be a SIMM, a SIPP, or a single chip, or an entire card-based on the resolution to which a memory error can be determined and whether the device is replaceable as a unit.
dMTFMemoryDeviceEntry	1.3.6.1.4.1.412.2.4.35.1		not-accessible	This group presents information about individual memory devices in the system. A memory device can be a SIMM, a SIPP, or a single chip, or an entire card-based on the resolution to which a memory error can be determined and whether the device is replaceable as a unit.
INT dMTFMemoryDeviceState	1.3.6.1.4.1.412.2.4.35.1.0	INTEGER	read-write
NUM memoryDeviceTableIndexAtt1	1.3.6.1.4.1.412.2.4.35.1.1	DmiInteger	read-only	A unique number that identifies this row.
NUM memoryArrayIndexAtt2_1	1.3.6.1.4.1.412.2.4.35.1.2	DmiInteger	read-only	The ID of the Memory Array that this Memory Device is a part of.
STR deviceLocatorAtt3	1.3.6.1.4.1.412.2.4.35.1.3	DmiDisplaystring	read-only	A string identifying the physically labeled socket or board position where the memory device is located. Eg. 'SIMM 3' or 'IC12'.
STR bankLocatorAtt4	1.3.6.1.4.1.412.2.4.35.1.4	DmiDisplaystring	read-only	A string identifying the physically labeled bank where the memory device is located. Eg. 'Bank 0' or 'A'.
NUM sizeAtt5	1.3.6.1.4.1.412.2.4.35.1.5	DmiInteger	read-only	Size of this memory device, in bytes.
INT formFactorAtt6	1.3.6.1.4.1.412.2.4.35.1.6	INTEGER	read-only	Implementation form factor for this memory device.
NUM totalWidthAtt7	1.3.6.1.4.1.412.2.4.35.1.7	DmiInteger	read-only	Total width of this memory device, including check or error correction bits, in bits. If there are no error correction bits, the value in this attribute should match that specified in Data Width. 0x80000000 denotes 'unknown'.
NUM dataWidthAtt8	1.3.6.1.4.1.412.2.4.35.1.8	DmiInteger	read-only	Data width of this memory device, in bits. A data width of 0 and a Total Width of 8 would indicate that the device is solely being used to provide eight error correction bits. 0x80000000 denotes 'unknown'.
INT memoryTypeAtt9	1.3.6.1.4.1.412.2.4.35.1.9	INTEGER	read-only	Type of memory used in this memory device.
INT typeDetailAtt10	1.3.6.1.4.1.412.2.4.35.1.10	INTEGER	read-only	Additional detail on the device type.
NUM deviceSetAtt11	1.3.6.1.4.1.412.2.4.35.1.11	DmiInteger	read-only	This attribute is used to identify when the Memory Device is one of a set of Memory Devices that must be populated with all devices of the same type and size, and which set the device belongs to. For example, when one SIMM belongs to a set of four. 0 indicates the Memory Device isn't part of a set. 0x80000000 denotes 'unknown'.
INT deviceErrorTypeAtt12	1.3.6.1.4.1.412.2.4.35.1.12	INTEGER	read-only	The type of error that is associated with the current status reported in Operational State for this Memory Device.
INT errorGranularityAtt13	1.3.6.1.4.1.412.2.4.35.1.13	INTEGER	read-only	Specifies whether the current error's location can be resolved to the partition or device level.
INT lastErrorUpdateAtt14	1.3.6.1.4.1.412.2.4.35.1.14	INTEGER	read-only	System state during which the last error update was collected.
INT errorOperationAtt15	1.3.6.1.4.1.412.2.4.35.1.15	INTEGER	read-only	The memory access operation that caused the current error.
NUM errorDataSizeAtt16	1.3.6.1.4.1.412.2.4.35.1.16	DmiInteger	read-only	The size of the data transfer that caused the error,in bits. Zero indicates no error, 0x80000000 denotes 'unknown'.
STR errorDataAtt17	1.3.6.1.4.1.412.2.4.35.1.17	DmiOctetstring	read-only	Data captured during the erroneous Memory Array access. The data occupies the first n bytes of the octet string required to hold 'Error Data Size' bits of the data. Data is stored least-significant byte first.
STR vendorSyndromeAtt18	1.3.6.1.4.1.412.2.4.35.1.18	DmiOctetstring	read-only	Vendor-specific syndrome or CRC data associated with the erroneous access.
NUM deviceErrorAddressAtt19	1.3.6.1.4.1.412.2.4.35.1.19	DmiInteger	read-only	Physical address of the error relative to the start of the device, in bytes. 0x80000000 denotes 'unknown'.
NUM arrayErrorAddressAtt20	1.3.6.1.4.1.412.2.4.35.1.20	DmiInteger	read-only	Physical address of the kilobyte where the error is located, relative to the bus for the Memory Array. 0x80000000 denotes 'unknown'.
NUM errorResolutionAtt21	1.3.6.1.4.1.412.2.4.35.1.21	DmiInteger	read-only	Range in bytes that the error can be determined to be within,whe an Error Address is given. 0x80000000 denotes 'unknown'.
NUM fRUGroupIndexAtt22	1.3.6.1.4.1.412.2.4.35.1.22	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU.
NUM operationalGroupIndexAtt23	1.3.6.1.4.1.412.2.4.35.1.23	DmiInteger	read-only	The index into the Operational State Table for this device.
dMTFMemoryDeviceMappedAddressesTable	1.3.6.1.4.1.412.2.4.36		not-accessible	This table presents ranges of physical addresses that are mapped to a given Memory Device Set.
dMTFMemoryDeviceMappedAddressesEntry	1.3.6.1.4.1.412.2.4.36.1		not-accessible	This table presents ranges of physical addresses that are mapped to a given Memory Device Set.
INT dMTFMemoryDeviceMappedAddressesState	1.3.6.1.4.1.412.2.4.36.1.0	INTEGER	read-write
NUM memoryDeviceMappedAddressesTableIndexAtt1	1.3.6.1.4.1.412.2.4.36.1.1	DmiInteger	read-only	A unique number that identifies this row.
NUM memoryDeviceSetIDAtt2	1.3.6.1.4.1.412.2.4.36.1.2	DmiInteger	read-only	The row in the Memory Device table that this address range is for. This matches with a Memory Device Table Index. There may be multiple rows in Memory Device Mapped addresses for a single Memory Device.
NUM partitionAtt3	1.3.6.1.4.1.412.2.4.36.1.3	DmiInteger	read-only	Identifies the Memory partition in the Memory Array Mapped Addresses table that this Memory Device is part of. Partition number should be positive. 0x80000000 denotes 'unknown'.
NUM mappedRangeStartingAddressAtt4	1.3.6.1.4.1.412.2.4.36.1.4	DmiInteger	read-only	The physical starting address, in kilobytes, of a range of memory mapped to the specified Memory Device set. The address is specified relative to the bus that the device is connected to. 0x80000000 denotes 'unknown .
NUM mappedRangeEndingAddressAtt5	1.3.6.1.4.1.412.2.4.36.1.5	DmiInteger	read-only	The physical ending address of the last kilobyte of a range of addresses mapped to the specified Memory Device. The address is specified relative to the bus that the device is connected to. 0x80000000 denotes 'unknown .
NUM partitionRowPositionAtt6	1.3.6.1.4.1.412.2.4.36.1.6	DmiInteger	read-only	This specifies the position of the device in a row of the partition. For example, if it takes two 8-bit memory devices to form a 16-bit row, then a value of '2'in this attribute means the device is the second device. 0 is an invalid return value. 0x80000000 denotes 'unknown'.
NUM interleavePositionAtt7	1.3.6.1.4.1.412.2.4.36.1.7	DmiInteger	read-only	The position of this device in an interleave. 0 indicates non-interleaved. 1 indicates the first position 2 the second, and so on. For example, in a 2:1 interleave, a value of '1' would indicate the device is in the 'even' position, in a 4:1 interleave this would be the first of four possible positions). 0x80000000 denotes 'unknown' or'unsupported'.
NUM dataDepthAtt8	1.3.6.1.4.1.412.2.4.36.1.8	DmiInteger	read-only	The maximum number of consecutive rows accessed from this device in a single interleaved transfer. For example, if a device transfers two rows each time it is read, its Interleaved Data Depth would be 2. If that device is 2:1 interleaved and in Interleave Position '1', then the rows mapped to that device would be rows 1,2,5,6,9,10, etc. If the device is not part of an interleave, this value should be 0. 0x80000000 denotes 'unknown'.
dMTFSystemResources2Table	1.3.6.1.4.1.412.2.4.37		not-accessible	This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system.
dMTFSystemResources2Entry	1.3.6.1.4.1.412.2.4.37.1		not-accessible	This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system.
INT dMTFSystemResources2State	1.3.6.1.4.1.412.2.4.37.1.0	INTEGER	read-write
NUM systemResourcesIndexAtt1	1.3.6.1.4.1.412.2.4.37.1.1	DmiInteger	read-only	A number that uniquely identifies the rows in this table.
NUM resourceUserAtt2	1.3.6.1.4.1.412.2.4.37.1.2	DmiInteger	read-only	A unique number for each different 'resource user' that has resources specified in this table.
NUM resourceSetAtt3	1.3.6.1.4.1.412.2.4.37.1.3	DmiInteger	read-only	A number used as the ID of a set of Memory, I/O, DMA and/or INT resources for the resource user.
INT resourceAssignmentAtt4	1.3.6.1.4.1.412.2.4.37.1.4	INTEGER	read-only	Describes the state of the assignment of this set of resources. (Note: This value must be the same for all resources within a given set.)
INT resourceTypeAtt5	1.3.6.1.4.1.412.2.4.37.1.5	INTEGER	read-only	The type of resource described by this row.
NUM resourceNumberAtt6	1.3.6.1.4.1.412.2.4.37.1.6	DmiInteger	read-only	DMA or IRQ number - 0 for Memory and I/O ranges. This is the interrupt or DMA number relative to the bus that the interrupt is sourced from.
NUM resourceInfoIDAtt7	1.3.6.1.4.1.412.2.4.37.1.7	DmiInteger	read-only	ID of the row in the 'Info' table for this type of system resource. E.g. if this Resource Type is 'I/O' then this would be an index into the 'System Resource I/O Info' table.
NUM startAddressAtt8	1.3.6.1.4.1.412.2.4.37.1.8	DmiInteger64	read-only	Starting physical address for this memory range, or the minimum base address if this attribute is being used to describe a programmable range. 0 for IRQ and DMA resources.
NUM endAddressAtt9	1.3.6.1.4.1.412.2.4.37.1.9	DmiInteger64	read-only	Ending physical address (address of last byte) for this memory range, or the maximum configurable base address if this attribute is being used to describe a programmable range. 0 for IRQ and DMA resources.
NUM resourceSizeAtt10	1.3.6.1.4.1.412.2.4.37.1.10	DmiInteger	read-only	jNumber of consecutive bytes that a memory or I/O resource consumes. 0 for IRQ and DMA resources.
NUM baseAlignmentAtt11	1.3.6.1.4.1.412.2.4.37.1.11	DmiInteger	read-only	Alignment of Start Address, in bytes. Indicates the granularity of the increments in which a programmable range can be set.
INT shareableAtt12	1.3.6.1.4.1.412.2.4.37.1.12	INTEGER	read-only	Indicates whether the resource is shareable.
INT sharedAtt13	1.3.6.1.4.1.412.2.4.37.1.13	INTEGER	read-only	Indicates whether this resource, or a portion of this resource, is shared with another device.
dMTFSystemResourceDeviceInfoTable	1.3.6.1.4.1.412.2.4.38		not-accessible	This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system.
dMTFSystemResourceDeviceInfoEntry	1.3.6.1.4.1.412.2.4.38.1		not-accessible	This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system.
INT dMTFSystemResourceDeviceInfoState	1.3.6.1.4.1.412.2.4.38.1.0	INTEGER	read-write
NUM resourceUserAtt1	1.3.6.1.4.1.412.2.4.38.1.1	DmiInteger	read-only	A number that uniquely identifies this device. This number may be derived from the 'device number' that is assigned by 'Plug N Play', or may be uniquely assigned by the component instrumentation.
NUM deviceIDAtt2	1.3.6.1.4.1.412.2.4.38.1.2	DmiInteger	read-only	Physical Device ID from Config manager info. Equal to the CISTPL-MANFID field for PCMCIA devices. 0xFFFFFFFF = Unknown
NUM deviceSerialNumberAtt3	1.3.6.1.4.1.412.2.4.38.1.3	DmiInteger	read-only	Device Serial Number from Config manager info. 0 = Undefined
NUM logicalDeviceIDClassCodeAtt4	1.3.6.1.4.1.412.2.4.38.1.4	DmiInteger	read-only	Logical device ID for PnP ISA devices, Class code for PCI devices, CISTPL-FUNCID for PCMCIA devices. 0xFFFFFFFF = Undefined, 0 = reserved
NUM deviceFlagsAtt5	1.3.6.1.4.1.412.2.4.38.1.5	DmiInteger	read-only	Device flags from config manager info. Bit 0: 1 = device has been initialized, Bit 1: 1 = device is enabled, Bit 2: 1 = device config has been locked, Bit 3: 1 = device has temporary config resources assigned, Bit 4: 1 = device is reconfigurable
NUM deviceNumberAtt6	1.3.6.1.4.1.412.2.4.38.1.6	DmiInteger	read-only	Device Number for PCI Devices, Logical Device number for PnP Devices. 0 otherwise.
NUM functionNumberAtt7	1.3.6.1.4.1.412.2.4.38.1.7	DmiInteger	read-only	Function Number for PCI & EISA Devices. 0 otherwise.
NUM busTypeAtt8	1.3.6.1.4.1.412.2.4.38.1.8	DmiInteger	read-only	Bus number (0-255) for PCI Devices, Slot number for EISA and PnP Devices, Card logical socket number for PCMCIA devices. Zero otherwise.
NUM cMReservedAtt9	1.3.6.1.4.1.412.2.4.38.1.9	DmiInteger	read-only	Data from the Reserved field of the Configuration Manager bus access structure, or 0.
dMTFSystemResourceMemoryInfoTable	1.3.6.1.4.1.412.2.4.39		not-accessible	This group presents additional information about memory resource that have been defined in the System Resources table.
dMTFSystemResourceMemoryInfoEntry	1.3.6.1.4.1.412.2.4.39.1		not-accessible	This group presents additional information about memory resource that have been defined in the System Resources table.
INT dMTFSystemResourceMemoryInfoState	1.3.6.1.4.1.412.2.4.39.1.0	INTEGER	read-write
NUM systemResourceMemoryInfoIndexAtt1	1.3.6.1.4.1.412.2.4.39.1.1	DmiInteger	read-only	A number the uniquely identifies rows in this table.
INT iSAPCMCIARangeDescriptorAtt2	1.3.6.1.4.1.412.2.4.39.1.2	INTEGER	read-only	For PnP ISA/PCMCIA memory range descriptor compatibility.
INT eISARangeDescriptorAtt3	1.3.6.1.4.1.412.2.4.39.1.3	INTEGER	read-only	For PnP EISA memory range descriptor compatibility.
INT decodeSupportAtt4	1.3.6.1.4.1.412.2.4.39.1.4	INTEGER	read-only	For PnP memory range descriptor compatibility.
INT cacheableAtt5	1.3.6.1.4.1.412.2.4.39.1.5	INTEGER	read-only	Indicates whether it is allowable for this memory range to be cached or not.
INT cacheTypeAtt6	1.3.6.1.4.1.412.2.4.39.1.6	INTEGER	read-only	Indicates Cache Type that is compatible with this resource.
INT readWriteAtt7	1.3.6.1.4.1.412.2.4.39.1.7	INTEGER	read-only	Indicates the read-write accessibility of this memory resource.
dMTFSystemResourceIOInfoTable	1.3.6.1.4.1.412.2.4.40		not-accessible	This group presents additional information about I/O resources that have been defined in the System Resources table.
dMTFSystemResourceIOInfoEntry	1.3.6.1.4.1.412.2.4.40.1		not-accessible	This group presents additional information about I/O resources that have been defined in the System Resources table.
INT dMTFSystemResourceIOInfoState	1.3.6.1.4.1.412.2.4.40.1.0	INTEGER	read-write
NUM systemResourceIOInfoIndexAtt1	1.3.6.1.4.1.412.2.4.40.1.1	DmiInteger	read-only	A number the uniquely identifies rows in this table.
INT iODecodeAtt2	1.3.6.1.4.1.412.2.4.40.1.2	INTEGER	read-only	Number of bits used for I/O decode
dMTFSystemResourceIRQInfoTable	1.3.6.1.4.1.412.2.4.41		not-accessible	This group presents additional information about I/O resources that have been defined in the System Resources table.
dMTFSystemResourceIRQInfoEntry	1.3.6.1.4.1.412.2.4.41.1		not-accessible	This group presents additional information about I/O resources that have been defined in the System Resources table.
INT dMTFSystemResourceIRQInfoState	1.3.6.1.4.1.412.2.4.41.1.0	INTEGER	read-write
NUM systemResourceIRQInfoIndexAtt1	1.3.6.1.4.1.412.2.4.41.1.1	DmiInteger	read-only	A number the uniquely identifies rows in this table.
INT triggerTypeAtt2	1.3.6.1.4.1.412.2.4.41.1.2	INTEGER	read-only	The trigger type for this interrupt.
INT triggerLevelAtt3	1.3.6.1.4.1.412.2.4.41.1.3	INTEGER	read-only	The trigger level for this interrupt.
dMTFSystemResourceDMAInfoTable	1.3.6.1.4.1.412.2.4.42		not-accessible	This group presents additional information about DMA resources that have been defined in the System Resources table.
dMTFSystemResourceDMAInfoEntry	1.3.6.1.4.1.412.2.4.42.1		not-accessible	This group presents additional information about DMA resources that have been defined in the System Resources table.
INT dMTFSystemResourceDMAInfoState	1.3.6.1.4.1.412.2.4.42.1.0	INTEGER	read-write
NUM systemResourceDMAInfoIndexAtt1	1.3.6.1.4.1.412.2.4.42.1.1	DmiInteger	read-only	A number the uniquely identifies rows in this table.
INT dMATransferWidthAtt2	1.3.6.1.4.1.412.2.4.42.1.2	INTEGER	read-only	Width of DMA transfers supported
INT dMAAddressSizeAtt3	1.3.6.1.4.1.412.2.4.42.1.3	INTEGER	read-only	The width of the DMA address.
NUM dMAMaximumTransferSizeAtt4	1.3.6.1.4.1.412.2.4.42.1.4	DmiInteger	read-only	The maximum number of bytes that can be transferred by this DMA Channel.
INT dMATransferPreferenceAtt5	1.3.6.1.4.1.412.2.4.42.1.5	INTEGER	read-only	DMA transfer type preference.
INT busMasterAtt6	1.3.6.1.4.1.412.2.4.42.1.6	INTEGER	read-only	Indicates whether the device is using DMA is a bus master.
INT byteModeAtt7	1.3.6.1.4.1.412.2.4.42.1.7	INTEGER	read-only	Indicates whether DMA may execute in 'count by byte' mode.
INT wordModeAtt8	1.3.6.1.4.1.412.2.4.42.1.8	INTEGER	read-only	Indicates whether DMA may execute in 'count by word' mode.
INT channelTimingAtt9	1.3.6.1.4.1.412.2.4.42.1.9	INTEGER	read-only	DMA channel speed support.
INT typeCTimingAtt10	1.3.6.1.4.1.412.2.4.42.1.10	INTEGER	read-only	Indicates whether C type (burst) timing is supported.
dMTFSystemHardwareSecurityTable	1.3.6.1.4.1.412.2.4.49		not-accessible	This group describes the system-wide hardware security settings.
dMTFSystemHardwareSecurityEntry	1.3.6.1.4.1.412.2.4.49.1		not-accessible	This group describes the system-wide hardware security settings.
INT powerOnPasswordStatusAtt1	1.3.6.1.4.1.412.2.4.49.1.1	INTEGER	read-only	The current power-on password setting on the system.
INT keyboardPasswordStatusAtt2	1.3.6.1.4.1.412.2.4.49.1.2	INTEGER	read-only	The current keyboard password setting on the system
INT administratorPasswordStatisAtt3	1.3.6.1.4.1.412.2.4.49.1.3	INTEGER	read-only	The current administrator password setting on the system. This password is required to make hardware configuration changes to the system.
INT frontPanelResetStatusAtt4	1.3.6.1.4.1.412.2.4.49.1.4	INTEGER	read-only	The present status of the front panel reset button capability. If Enabled, the machine can be reset via the front panel reset button. If Disabled, the reset button, if available, is inoperative.
dMTFSystemPowerControlsTable	1.3.6.1.4.1.412.2.4.51		not-accessible	This group defines attributes for controlling the main power supply to the system.
dMTFSystemPowerControlsEntry	1.3.6.1.4.1.412.2.4.51.1		not-accessible	This group defines attributes for controlling the main power supply to the system.
INT powerControlRequestAtt1	1.3.6.1.4.1.412.2.4.51.1.1	INTEGER	read-write	Reading the value of this attribute gives the value of the last valid power control request that was written into it. Writing a valid value into it causes the appropriate power control action to be executed immediately. Writing an invalid or unimplemented value causes no change.
INT timedPowerOnAvailableAtt2	1.3.6.1.4.1.412.2.4.51.1.2	INTEGER	read-only	Defines whether a timed power-on facility is available.
NUM timeToNextScheduledPowerOnAtt3	1.3.6.1.4.1.412.2.4.51.1.3	DmiInteger	read-write	The number of seconds until the next timed power-on is scheduled to occur. A value of 0 means that if the system is powered off, no automatic timed poweron will occur. A value of 0x80000000 denotes 'unknown'.
dMTFVoltageProbeTable	1.3.6.1.4.1.412.2.4.53		not-accessible	This group defines the attributes for the voltage probes in this system.
NTF dMTFVoltageProbeEvt1	1.3.6.1.4.1.412.2.4.53.0.1			powerSupplyStatusChange
dMTFVoltageProbeEntry	1.3.6.1.4.1.412.2.4.53.1		not-accessible	This group defines the attributes for the voltage probes in this system.
INT dMTFVoltageProbeState	1.3.6.1.4.1.412.2.4.53.1.0	INTEGER	read-write
NUM voltageProbeIndexAtt1	1.3.6.1.4.1.412.2.4.53.1.1	DmiInteger	read-only	Index into this voltage probe table.
INT voltageProbeLocationAtt2	1.3.6.1.4.1.412.2.4.53.1.2	INTEGER	read-only	Identifies the physical location of the voltage probe.
STR voltageProbeDescriptionAtt3	1.3.6.1.4.1.412.2.4.53.1.3	DmiDisplaystring	read-only	Additional descriptive information about the voltage probe or probe's location.
INT voltageStatusAtt4	1.3.6.1.4.1.412.2.4.53.1.4	INTEGER	read-only	Defines the status of the voltage monitored by this voltage probe.
NUM voltageProbeVoltageLevelAtt5	1.3.6.1.4.1.412.2.4.53.1.5	DmiInteger	read-only	The current voltage level of this voltage probe in millivolts. 0x8000000 denotes 'unknown'.
NUM monitoredVoltageNominalLevelAtt6	1.3.6.1.4.1.412.2.4.53.1.6	DmiInteger	read-only	The nominal voltage level of the voltage monitored by this probe in millivolts. 0x80000000 denotes 'unknown'.
NUM monitoredVoltageNormalMaximumAtt7	1.3.6.1.4.1.412.2.4.53.1.7	DmiInteger	read-only	The normal maximum voltage level of the voltage monitored by this probe in millivolts. 0x80000000 denotes 'unknown'.
NUM monitoredVoltageNormalMinimumAtt8	1.3.6.1.4.1.412.2.4.53.1.8	DmiInteger	read-only	The normal minimum voltage level of the voltage monitored by this probe in millivolts. 0x80000000 denotes 'unknown'.
NUM voltageProbeMaximumAtt9	1.3.6.1.4.1.412.2.4.53.1.9	DmiInteger	read-only	The maximum voltage level specified to be readable by this probe in millivolts. 0x80000000 denotes 'unknown'.
NUM voltageProbeMinimumAtt10	1.3.6.1.4.1.412.2.4.53.1.10	DmiInteger	read-only	The minimum voltage level specified to be readable by this probe in millivolts. 0x80000000 denotes 'unknown'.
NUM voltageLevelLowerThresholdNonCriticalAtt11	1.3.6.1.4.1.412.2.4.53.1.11	DmiInteger	read-write	The lower non-critical threshold for the voltage level set by the user, in millivolts. 0x80000000 denotes 'unknown'.
NUM voltageLevelUpperThresholdNonCriticalAtt12	1.3.6.1.4.1.412.2.4.53.1.12	DmiInteger	read-write	The upper non-critical threshold for the voltage probe, in millivolts. 0x80000000 denotes 'unknown'.
NUM voltageLevelLowerThresholdCriticalAtt13	1.3.6.1.4.1.412.2.4.53.1.13	DmiInteger	read-write	The lower critical threshold for the voltage probe, in millivolt . 0x80000000 denotes 'unknown'.
NUM voltageLevelUpperThresholdCriticalAtt14	1.3.6.1.4.1.412.2.4.53.1.14	DmiInteger	read-write	The upper critical threshold for the voltage probe, in millivolt . 0x80000000 denotes 'unknown'.
NUM voltageLevelLowerThresholdNonRecoverableAtt15	1.3.6.1.4.1.412.2.4.53.1.15	DmiInteger	read-write	The lower non-recoverable threshold for the voltage probe, in millivolts. 0x80000000 denotes 'unknown'.
NUM voltageLevelUpperThresholdNonRecoverableAtt16	1.3.6.1.4.1.412.2.4.53.1.16	DmiInteger	read-write	The upper non-recoverable threshold for the voltage probe, in millivolts. 0x80000000 denotes 'unknown'.
NUM voltageProbeResolutionAtt17	1.3.6.1.4.1.412.2.4.53.1.17	DmiInteger	read-write	The resolution for the reading from this voltage probe, in tenths of millivolts. '0x80000000 denotes 'unknown'.
NUM voltageProbeToleranceAtt18	1.3.6.1.4.1.412.2.4.53.1.18	DmiInteger	read-write	The tolerance for the reading from this voltage probe, in plus/minus millivolts. 0x80000000 denotes 'unknown'.
NUM voltageProbeAccuracyAtt19	1.3.6.1.4.1.412.2.4.53.1.19	DmiInteger	read-write	The accuracy for the reading from this voltage probe, in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown'.
NUM fRUGroupIndexAtt20_2	1.3.6.1.4.1.412.2.4.53.1.20	DmiInteger	read-only	Index into the FRU table
NUM operationalGroupIndexAtt21_2	1.3.6.1.4.1.412.2.4.53.1.21	DmiInteger	read-only	Index into the Operational State table
INT dMTFVoltageProbeEvSys	1.3.6.1.4.1.412.2.4.53.6	INTEGER	not-accessible	The major functional aspect of the product causing the fault.
INT dMTFVoltageProbeEvSub	1.3.6.1.4.1.412.2.4.53.7	INTEGER	not-accessible	The minor functional aspect of the product causing the fault.
dMTFTemperatureProbeTable	1.3.6.1.4.1.412.2.4.54		not-accessible	This group defines the attributes for the temperature probes in this system.
NTF dMTFTemperatureProbeEvt1	1.3.6.1.4.1.412.2.4.54.0.1			coolingDeviceStatusChange
dMTFTemperatureProbeEntry	1.3.6.1.4.1.412.2.4.54.1		not-accessible	This group defines the attributes for the temperature probes in this system.
INT dMTFTemperatureProbeState	1.3.6.1.4.1.412.2.4.54.1.0	INTEGER	read-write
NUM temperatureProbeTableIndexAtt1	1.3.6.1.4.1.412.2.4.54.1.1	DmiInteger	read-only	Index into this temperature probe table.
INT temperatureProbeLocationAtt2	1.3.6.1.4.1.412.2.4.54.1.2	INTEGER	read-only	Identifies the physical location of the temperature probe.
STR temperatureProbeDescriptionAtt3	1.3.6.1.4.1.412.2.4.54.1.3	DmiDisplaystring	read-only	Additional descriptive information about the temperature probe or probe's location.
INT temperatureStatusAtt4	1.3.6.1.4.1.412.2.4.54.1.4	INTEGER	read-only	Defines the status of the temperature monitored by this temperat re probe.
NUM temperatureProbeTemperatureReadingAtt5	1.3.6.1.4.1.412.2.4.54.1.5	DmiInteger	read-only	The present temperature reading of this temperature probe in 1/10th degrees C. 0x8000000 denotes 'unknown'.
NUM monitoredTemperatureNominalReadingAtt6	1.3.6.1.4.1.412.2.4.54.1.6	DmiInteger	read-only	The nominal temperature reading of the temperature monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.
NUM monitoredTemperatureNormalMaximumAtt7	1.3.6.1.4.1.412.2.4.54.1.7	DmiInteger	read-only	The normal maximum temperature reading of the temperature monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.
NUM monitoredTemperatureNormalMinimumAtt8	1.3.6.1.4.1.412.2.4.54.1.8	DmiInteger	read-only	The normal minimum temperature reading of the temperature monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.
NUM temperatureProbeMaximumAtt9	1.3.6.1.4.1.412.2.4.54.1.9	DmiInteger	read-only	The maximum temperature reading specified to be readable by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.
NUM temperatureProbeMinimumAtt10	1.3.6.1.4.1.412.2.4.54.1.10	DmiInteger	read-only	The minimum temperature reading specified to be readable by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.
NUM temperatureReadingLowerThresholdNonCriticalAtt11	1.3.6.1.4.1.412.2.4.54.1.11	DmiInteger	read-write	The lower non-critical threshold for the temperature reading set by the user, in 1/10th degrees C. 0x80000000 denotes 'unknown'.
NUM temperatureReadingUpperThresholdNonCriticalAtt12	1.3.6.1.4.1.412.2.4.54.1.12	DmiInteger	read-write	The upper non-critical threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown'.
NUM temperatureReadingLowerThresholdCriticalAtt13	1.3.6.1.4.1.412.2.4.54.1.13	DmiInteger	read-write	The lower critical threshold for the temperature probe, in 1/10 degrees C. 0x80000000 denotes 'unknown'.
NUM temperatureReadingUpperThresholdCriticalAtt14	1.3.6.1.4.1.412.2.4.54.1.14	DmiInteger	read-write	The upper critical threshold for the temperature probe, in /10th degrees C. 0x80000000 denotes 'unknown'.
NUM temperatureReadingLowerThresholdNonRecoverableAtt15	1.3.6.1.4.1.412.2.4.54.1.15	DmiInteger	read-write	The lower non-recoverable threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown'.
NUM temperatureReadingUpperThresholdNonRecoverableAtt16	1.3.6.1.4.1.412.2.4.54.1.16	DmiInteger	read-write	The upper non-recoverable threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown'.
NUM temperatureProbeResolutionAtt17	1.3.6.1.4.1.412.2.4.54.1.17	DmiInteger	read-write	The resolution for the reading from this temperature probe, in tenths of 1/10th degrees C. '0x80000000 denotes 'unknown'.
NUM temperatureProbeToleranceAtt18	1.3.6.1.4.1.412.2.4.54.1.18	DmiInteger	read-write	The tolerance for the reading from this temperature probe, in plus/minus 1/10 degrees C. 0x80000000 denotes 'unknown'.
NUM temperatureProbeAccuracyAtt19	1.3.6.1.4.1.412.2.4.54.1.19	DmiInteger	read-write	The accuracy for the reading from this temperature probe, in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown' or'unsupport d'.
NUM fRUGroupIndexAtt20_1	1.3.6.1.4.1.412.2.4.54.1.20	DmiInteger	read-only	Index into the FRU table. A value of -1 indicates that this device is not an FRU.
NUM operationalGroupIndexAtt21_1	1.3.6.1.4.1.412.2.4.54.1.21	DmiInteger	read-only	Index into the Operational State table
INT dMTFTemperatureProbeEvSys	1.3.6.1.4.1.412.2.4.54.6	INTEGER	not-accessible	The major functional aspect of the product causing the fault.
INT dMTFTemperatureProbeEvSub	1.3.6.1.4.1.412.2.4.54.7	INTEGER	not-accessible	The minor functional aspect of the product causing the fault.
dMTFElectricalCurrentProbeTable	1.3.6.1.4.1.412.2.4.55		not-accessible	This group defines the attributes for the current probes in this system.
NTF dMTFElectricalCurrentProbeEvt1	1.3.6.1.4.1.412.2.4.55.0.1			powerSupplyStatusChange
NTF dMTFElectricalCurrentProbeEvt2	1.3.6.1.4.1.412.2.4.55.0.2			coolingDeviceStatusChange
dMTFElectricalCurrentProbeEntry	1.3.6.1.4.1.412.2.4.55.1		not-accessible	This group defines the attributes for the current probes in this system.
INT dMTFElectricalCurrentProbeState	1.3.6.1.4.1.412.2.4.55.1.0	INTEGER	read-write
NUM electricalCurrentProbeTableIndexAtt1	1.3.6.1.4.1.412.2.4.55.1.1	DmiInteger	read-only	Index into this electrical current probe table.
INT electricalCurrentProbeLocationAtt2	1.3.6.1.4.1.412.2.4.55.1.2	INTEGER	read-only	Identifies the physical location of the electrical current probe.
STR electricalCurrentProbeDescriptionAtt3	1.3.6.1.4.1.412.2.4.55.1.3	DmiDisplaystring	read-only	Additional descriptive information about the electrical current probe or probe's location.
INT electricalCurrentStatusAtt4	1.3.6.1.4.1.412.2.4.55.1.4	INTEGER	read-only	Defines the status of the electrical current monitored by this electrical current probe.
NUM electricalCurrentProbeReadingAtt5	1.3.6.1.4.1.412.2.4.55.1.5	DmiInteger	read-only	The present electrical current reading of this probe in milliamp . 0x8000000 denotes 'unknown'.
NUM monitoredElectricalCurrentNominalReadingAtt6	1.3.6.1.4.1.412.2.4.55.1.6	DmiInteger	read-only	The nominal electrical current reading of the current monitored by this probe in milliamps. 0x80000000 denotes 'unknown'.
NUM monitoredElectricalCurrentNormalMaximumAtt7	1.3.6.1.4.1.412.2.4.55.1.7	DmiInteger	read-only	The normal maximum electrical current reading of the current monitored by this probe in milliamps. 0x80000000 denotes 'unknown'.
NUM monitoredElectricalCurrentNormalMinimumAtt8	1.3.6.1.4.1.412.2.4.55.1.8	DmiInteger	read-only	The normal minimum electrical current reading of the current monitored by this probe in milliamps. 0x80000000 denotes 'unknown'.
NUM electricalCurrentProbeMaximumAtt9	1.3.6.1.4.1.412.2.4.55.1.9	DmiInteger	read-only	The maximum electrical current reading specified to be readable by this probe in milliamps. 0x80000000 denotes 'unknown'.
NUM electricalCurrentProbeMinimumAtt10	1.3.6.1.4.1.412.2.4.55.1.10	DmiInteger	read-only	The minimum electrical current reading specified to be readable by this probe in milliamps. 0x80000000 denotes 'unknown'.
NUM electricalCurrentReadingLowerThresholdNonCriticalAtt11	1.3.6.1.4.1.412.2.4.55.1.11	DmiInteger	read-write	The lower non-critical threshold for the electrical current reading set by the user, in milliamps. 0x80000000 denotes 'unknown'.
NUM electricalCurrentReadingUpperThresholdNonCriticalAtt12	1.3.6.1.4.1.412.2.4.55.1.12	DmiInteger	read-write	The upper non-critical threshold for the electrical current reading, in milliamps. 0x80000000 denotes 'unknown'.
NUM electricalCurrentReadingLowerThresholdCriticalAtt13	1.3.6.1.4.1.412.2.4.55.1.13	DmiInteger	read-write	The lower critical threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'.
NUM currentReadingUpperThresholdCriticalAtt14	1.3.6.1.4.1.412.2.4.55.1.14	DmiInteger	read-write	The upper critical threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'.
NUM electricalCurrentReadingLowerThresholdNonRecoverabAtt15	1.3.6.1.4.1.412.2.4.55.1.15	DmiInteger	read-write	The lower non-recoverable threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'.
NUM electricalCurrentReadingUpperThresholdNonRecoverabAtt16	1.3.6.1.4.1.412.2.4.55.1.16	DmiInteger	read-write	The upper non-recoverable threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'.
NUM electricalCurrentProbeResolutionAtt17	1.3.6.1.4.1.412.2.4.55.1.17	DmiInteger	read-write	The resolution for the reading from this electrical current probe, in tenths of milliamps. '0x80000000 denotes 'unknown'.
NUM electricalCurrentProbeToleranceAtt18	1.3.6.1.4.1.412.2.4.55.1.18	DmiInteger	read-write	The tolerance for the reading from this electrical current probe, in plus/minus milliamps. 0x80000000 denotes 'unknown'.
NUM electricalCurrentProbeAccuracyAtt19	1.3.6.1.4.1.412.2.4.55.1.19	DmiInteger	read-write	The accuracy for the reading from this electrical current probe, in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown'.
NUM fRUGroupIndexAtt20	1.3.6.1.4.1.412.2.4.55.1.20	DmiInteger	read-only	Index into the FRU table
NUM operationalGroupIndexAtt21	1.3.6.1.4.1.412.2.4.55.1.21	DmiInteger	read-only	Index into the Operational State table
INT dMTFElectricalCurrentProbeEvSys	1.3.6.1.4.1.412.2.4.55.6	INTEGER	not-accessible	The major functional aspect of the product causing the fault.
INT dMTFElectricalCurrentProbeEvSub	1.3.6.1.4.1.412.2.4.55.7	INTEGER	not-accessible	The minor functional aspect of the product causing the fault.
dMTFPhysicalContainerGlobalTableTable	1.3.6.1.4.1.412.2.4.63		not-accessible	This group of attributes describes the fields in a row ofthe Physical Container Global Table. This table lists all of the containers (e.g. chassis, sub-chassis, etc.) included within the component whose structure is being described
NTF dMTFPhysicalContainerGlobalTableEvt1	1.3.6.1.4.1.412.2.4.63.0.1			securitySettingsChange
NTF dMTFPhysicalContainerGlobalTableEvt2	1.3.6.1.4.1.412.2.4.63.0.2			powerSupplyStatusChange
NTF dMTFPhysicalContainerGlobalTableEvt3	1.3.6.1.4.1.412.2.4.63.0.3			coolingDeviceStatusChange
NTF dMTFPhysicalContainerGlobalTableEvt4	1.3.6.1.4.1.412.2.4.63.0.4			physicalDeviceStatusChange
NTF dMTFPhysicalContainerGlobalTableEvt5	1.3.6.1.4.1.412.2.4.63.0.5			logicalDeviceStatusChange
NTF dMTFPhysicalContainerGlobalTableEvt6	1.3.6.1.4.1.412.2.4.63.0.6			containerSecurityBreach
NTF dMTFPhysicalContainerGlobalTableEvt7	1.3.6.1.4.1.412.2.4.63.0.7			configurationError
dMTFPhysicalContainerGlobalTableEntry	1.3.6.1.4.1.412.2.4.63.1		not-accessible	This group of attributes describes the fields in a row ofthe Physical Container Global Table. This table lists all of the containers (e.g. chassis, sub-chassis, etc.) included within the component whose structure is being described
INT dMTFPhysicalContainerGlobalTableState	1.3.6.1.4.1.412.2.4.63.1.0	INTEGER	read-write
INT containerOrChassisTypeAtt1	1.3.6.1.4.1.412.2.4.63.1.1	INTEGER	read-only	The type of container or chassis.
STR assetTagAtt2	1.3.6.1.4.1.412.2.4.63.1.2	DmiDisplaystring	read-write	The Container asset tag string. This asset tag string is writeable by the system administrator.
INT chassisLockPresentAtt3	1.3.6.1.4.1.412.2.4.63.1.3	INTEGER	read-only	If true, a chassis lock is present on the Container.
INT bootupStateAtt4	1.3.6.1.4.1.412.2.4.63.1.4	INTEGER	read-only	The current state of this system when it booted.
INT powerStateAtt5	1.3.6.1.4.1.412.2.4.63.1.5	INTEGER	read-only	The current state of the power supply or battery(s) for this system.
INT thermalStateAtt6	1.3.6.1.4.1.412.2.4.63.1.6	INTEGER	read-only	The current thermal state of this Container.
NUM fRUGroupIndexAtt7	1.3.6.1.4.1.412.2.4.63.1.7	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU.
NUM operationalGroupIndexAtt8	1.3.6.1.4.1.412.2.4.63.1.8	DmiInteger	read-only	The index into the Operational State table for this device if applicable.
NUM containerIndexAtt9	1.3.6.1.4.1.412.2.4.63.1.9	DmiInteger	read-only	A unique index for the Physical Container in Physical Container Global Table.
STR containerNameAtt10	1.3.6.1.4.1.412.2.4.63.1.10	DmiDisplaystring	read-write	This is any 64-octet long name that the user or system administr tor wishes to give this specific physical container.
STR containerLocationAtt11	1.3.6.1.4.1.412.2.4.63.1.11	DmiDisplaystring	read-write	This attribute is a string name for the location of the containe . This attribute is Read-Write and may be set to any appropriate value by the user. The string may be 128 octets long.
INT containerSecurityStatusAtt12	1.3.6.1.4.1.412.2.4.63.1.12	INTEGER	read-only	This attribute describes whether the Container is physically secure or not. This includes the state of the door lock, or the boot devices or the keyboard or mouse.
INT dMTFPhysicalContainerGlobalTableEvSys	1.3.6.1.4.1.412.2.4.63.6	INTEGER	not-accessible	The major functional aspect of the product causing the fault.
INT dMTFPhysicalContainerGlobalTableEvSub	1.3.6.1.4.1.412.2.4.63.7	INTEGER	not-accessible	The minor functional aspect of the product causing the fault.
dMTFPowerUnitGlobalTableTable	1.3.6.1.4.1.412.2.4.66		not-accessible	This global table describes all of the Power Units in this system component. The unique index of each Power Unit is the key into this table. A Power Unit is composed of potentially more than one Power Supply in a redundant configuration. Individual power supplies are described in the 'Power Supply' standard group. In that group, each individual power supply entry will point to a Power Unit in this table by using the index of the row in this table that describes the Power Unit. If a Power Unit is redunda
dMTFPowerUnitGlobalTableEntry	1.3.6.1.4.1.412.2.4.66.1		not-accessible	This global table describes all of the Power Units in this system component. The unique index of each Power Unit is the key into this table. A Power Unit is composed of potentially more than one Power Supply in a redundant configuration. Individual power supplies are described in the 'Power Supply' standard group. In that group, each individual power supply entry will point to a Power Unit in this table by using the index of the row in this table that describes the Power Unit. If a Power Unit is redunda
INT dMTFPowerUnitGlobalTableState	1.3.6.1.4.1.412.2.4.66.1.0	INTEGER	read-write
NUM powerUnitIndexAtt1	1.3.6.1.4.1.412.2.4.66.1.1	DmiInteger	read-only	The unique index given to each Power Unit being described by this table. This unique index is the key into this table.
INT powerUnitRedundancyStatusAtt2	1.3.6.1.4.1.412.2.4.66.1.2	INTEGER	read-only	Gives the redundancy status of the Power Unit. 'Fully Redundant means that all of the configured redundancy is still available; 'Degraded Redundancy' means that some failures have been experienced but some reduced amount of redundancy is still available; 'Redundancy Lost' means that a sufficie t number of failures have been experienced that no redundancy is available and the next failure experienced within the Power Unit will cause overall Power Unit failure.
dmtfDynOids	1.3.6.1.4.1.412.3
dmiDynOid386845712	1.3.6.1.4.1.412.3.386845712
dmiDynOid73111109	1.3.6.1.4.1.412.3.386845712.73111109
dmiDynOid3922453424	1.3.6.1.4.1.412.3.386845712.73111109.3922453424
iNTELMIFTOMIBTable	1.3.6.1.4.1.412.3.386845712.73111109.3922453424.1737102472		not-accessible	This group maps the DMI attributes to SNMP.
iNTELMIFTOMIBEntry	1.3.6.1.4.1.412.3.386845712.73111109.3922453424.1737102472.1		not-accessible	This group maps the DMI attributes to SNMP.
STR dellBaseBoardMIBAtt1	1.3.6.1.4.1.412.3.386845712.73111109.3922453424.1737102472.1.1	DmiDisplaystring	read-only	The MIB name that defines this MIF
STR mIBOIDAtt2	1.3.6.1.4.1.412.3.386845712.73111109.3922453424.1737102472.1.2	DmiDisplaystring	read-only	The MIB OID that corresponds to this MIF
NUM disableTrapsAtt3	1.3.6.1.4.1.412.3.386845712.73111109.3922453424.1737102472.1.3	DmiInteger	read-only	Setting this value to 1 disables trap generation.
dell	1.3.6.1.4.1.674
server2	1.3.6.1.4.1.674.10891
dellTemperatureProbeTable	1.3.6.1.4.1.674.10891.300		not-accessible	This group defines the attributes for the temperature probes this system.
NTF dellTemperatureProbeEvt1	1.3.6.1.4.1.674.10891.300.0.1			coolingDeviceStatusChange
dellTemperatureProbeEntry	1.3.6.1.4.1.674.10891.300.1		not-accessible	This group defines the attributes for the temperature probes this system.
INT dellTemperatureProbeState	1.3.6.1.4.1.674.10891.300.1.0	INTEGER	read-write
NUM tempParentIndexAtt1	1.3.6.1.4.1.674.10891.300.1.1	DmiInteger	read-only	An index into the chassis table.
NUM tempIndexAtt2	1.3.6.1.4.1.674.10891.300.1.2	DmiInteger	read-only	index into this temperature probe table.
INT tempTypeAtt3	1.3.6.1.4.1.674.10891.300.1.3	INTEGER	read-only	Defines the type of the temperature probe.
INT tempStatusAtt4	1.3.6.1.4.1.674.10891.300.1.4	INTEGER	read-only	Current status of the temperature probe.
NUM tempReadingAtt5	1.3.6.1.4.1.674.10891.300.1.5	DmiInteger	read-only	The reading of the temperature probe in tenths of degrees.
STR tempMinWarnAtt6	1.3.6.1.4.1.674.10891.300.1.6	DmiDisplaystring	read-write	The lower warning threshold for the temperature probe set by the user.
STR tempMaxWarnAtt7	1.3.6.1.4.1.674.10891.300.1.7	DmiDisplaystring	read-write	The upper warning threshold for the temperature probe set by the user.
NUM tempMinFailAtt8	1.3.6.1.4.1.674.10891.300.1.8	DmiInteger	read-only	The lower failure threshold for the temperature probe.
NUM tempMaxFailAtt9	1.3.6.1.4.1.674.10891.300.1.9	DmiInteger	read-only	The upper failure threshold for the temperature probe.
STR tempLocationAtt10	1.3.6.1.4.1.674.10891.300.1.10	DmiDisplaystring	read-only	The location of this temperature probe within the system.
INT dellTemperatureProbeEvSys	1.3.6.1.4.1.674.10891.300.6	INTEGER	not-accessible
INT dellTemperatureProbeEvSub	1.3.6.1.4.1.674.10891.300.7	INTEGER	not-accessible
INT dellTemperatureProbeEvSol	1.3.6.1.4.1.674.10891.300.8	INTEGER	not-accessible
dellFanSensorTable	1.3.6.1.4.1.674.10891.301		not-accessible	This group defines the attributes for the fan probes this system.
NTF dellFanSensorEvt1	1.3.6.1.4.1.674.10891.301.0.1			coolingDeviceStatusChange
dellFanSensorEntry	1.3.6.1.4.1.674.10891.301.1		not-accessible	This group defines the attributes for the fan probes this system.
INT dellFanSensorState	1.3.6.1.4.1.674.10891.301.1.0	INTEGER	read-write
NUM fansParentIndexAtt1	1.3.6.1.4.1.674.10891.301.1.1	DmiInteger	read-only	An index into the chassis table.
NUM fansIndexAtt2	1.3.6.1.4.1.674.10891.301.1.2	DmiInteger	read-only	index into this fan probe table.
INT fansTypeAtt3	1.3.6.1.4.1.674.10891.301.1.3	INTEGER	read-only	Defines the type of the fan probe.
INT fansStatusAtt4	1.3.6.1.4.1.674.10891.301.1.4	INTEGER	read-only	Current status of the fan probe.
NUM fansReadingAtt5	1.3.6.1.4.1.674.10891.301.1.5	DmiInteger	read-only	The reading of the fan probe in RPM (or boolean).
STR fansWarningMinAtt6	1.3.6.1.4.1.674.10891.301.1.6	DmiDisplaystring	read-write	The lower warning threshold for the fan probe set by the user.
STR fansMaxWarnAtt7	1.3.6.1.4.1.674.10891.301.1.7	DmiDisplaystring	read-write	The upper warning threshold for the fan probe set by the user.
NUM fansMinFailAtt8	1.3.6.1.4.1.674.10891.301.1.8	DmiInteger	read-only	The lower failure threshold for the fan probe.
NUM fansMaxFailAtt9	1.3.6.1.4.1.674.10891.301.1.9	DmiInteger	read-only	The upper failure threshold for the fan probe.
STR fansLocationAtt10	1.3.6.1.4.1.674.10891.301.1.10	DmiDisplaystring	read-only	The location of this fan probe within the system.
INT dellFanSensorEvSys	1.3.6.1.4.1.674.10891.301.6	INTEGER	not-accessible
INT dellFanSensorEvSub	1.3.6.1.4.1.674.10891.301.7	INTEGER	not-accessible
INT dellFanSensorEvSol	1.3.6.1.4.1.674.10891.301.8	INTEGER	not-accessible
dellVoltageProbeTable	1.3.6.1.4.1.674.10891.302		not-accessible	The Voltage group contains the data on all the voltage probes in a system.
NTF dellVoltageProbeEvt1	1.3.6.1.4.1.674.10891.302.0.1			powerSupplyStatusChange
dellVoltageProbeEntry	1.3.6.1.4.1.674.10891.302.1		not-accessible	The Voltage group contains the data on all the voltage probes in a system.
INT dellVoltageProbeState	1.3.6.1.4.1.674.10891.302.1.0	INTEGER	read-write
NUM voltParentIndexAtt1	1.3.6.1.4.1.674.10891.302.1.1	DmiInteger	read-only	The chassis this voltage probe is connected to.
NUM voltIndexAtt2	1.3.6.1.4.1.674.10891.302.1.2	DmiInteger	read-only	the index of the voltage probe within the chassis.
INT voltTypeAtt3	1.3.6.1.4.1.674.10891.302.1.3	INTEGER	read-only	The type of voltage probe
INT voltStatusAtt4	1.3.6.1.4.1.674.10891.302.1.4	INTEGER	read-only	Status of the voltage probe.
NUM voltReadingAtt5	1.3.6.1.4.1.674.10891.302.1.5	DmiInteger	read-only	Current reading of the voltage probe, in millivolts.
STR voltMinWarnAtt6	1.3.6.1.4.1.674.10891.302.1.6	DmiDisplaystring	read-write	lower warning threshold value for this voltage probe.
STR voltMaxWarnAtt7	1.3.6.1.4.1.674.10891.302.1.7	DmiDisplaystring	read-write	upper warning threshold value for this voltage probe.
NUM voltMinFailAtt8	1.3.6.1.4.1.674.10891.302.1.8	DmiInteger	read-only	lower failure threshold value for this voltage probe.
NUM voltMaxFailAtt9	1.3.6.1.4.1.674.10891.302.1.9	DmiInteger	read-only	upper failure threshold value for this voltage probe.
STR voltLocationAtt10	1.3.6.1.4.1.674.10891.302.1.10	DmiDisplaystring	read-only	the location of this voltage probe within the system.
INT dellVoltageProbeEvSys	1.3.6.1.4.1.674.10891.302.6	INTEGER	not-accessible
INT dellVoltageProbeEvSub	1.3.6.1.4.1.674.10891.302.7	INTEGER	not-accessible
INT dellVoltageProbeEvSol	1.3.6.1.4.1.674.10891.302.8	INTEGER	not-accessible
dellCurrentProbeTable	1.3.6.1.4.1.674.10891.303		not-accessible	The Current group contains the data on all the Current probes in a system.
NTF dellCurrentProbeEvt1	1.3.6.1.4.1.674.10891.303.0.1			powerSupplyStatusChange
dellCurrentProbeEntry	1.3.6.1.4.1.674.10891.303.1		not-accessible	The Current group contains the data on all the Current probes in a system.
INT dellCurrentProbeState	1.3.6.1.4.1.674.10891.303.1.0	INTEGER	read-write
NUM ampParentIndexAtt1	1.3.6.1.4.1.674.10891.303.1.1	DmiInteger	read-only	The chassis this current probe is connected to.
NUM ampIndexAtt2	1.3.6.1.4.1.674.10891.303.1.2	DmiInteger	read-only	the index of the current probe within the chassis.
INT ampTypeAtt3	1.3.6.1.4.1.674.10891.303.1.3	INTEGER	read-only	The type of current probe
INT ampStatusAtt4	1.3.6.1.4.1.674.10891.303.1.4	INTEGER	read-only	Status of the current probe.
NUM ampReadingAtt5	1.3.6.1.4.1.674.10891.303.1.5	DmiInteger	read-only	Current reading of the current probe in milliamps.
STR ampMinWarnAtt6	1.3.6.1.4.1.674.10891.303.1.6	DmiDisplaystring	read-write	lower warning threshold value for this current probe.
STR ampMaxWarnAtt7	1.3.6.1.4.1.674.10891.303.1.7	DmiDisplaystring	read-write	upper warning threshold value for this current probe.
NUM ampMinFailAtt8	1.3.6.1.4.1.674.10891.303.1.8	DmiInteger	read-only	lower failure threshold value for this current probe.
NUM ampMaxFailAtt9	1.3.6.1.4.1.674.10891.303.1.9	DmiInteger	read-only	upper failure threshold value for this current probe.
STR ampLocationAtt10	1.3.6.1.4.1.674.10891.303.1.10	DmiDisplaystring	read-only	the location of this current probe within the system.
INT dellCurrentProbeEvSys	1.3.6.1.4.1.674.10891.303.6	INTEGER	not-accessible
INT dellCurrentProbeEvSub	1.3.6.1.4.1.674.10891.303.7	INTEGER	not-accessible
INT dellCurrentProbeEvSol	1.3.6.1.4.1.674.10891.303.8	INTEGER	not-accessible
dellRedundantPowerSupplyTable	1.3.6.1.4.1.674.10891.304		not-accessible	The Power Supply group contains the data on all the redundant power supplies in a system.
dellRedundantPowerSupplyEntry	1.3.6.1.4.1.674.10891.304.1		not-accessible	The Power Supply group contains the data on all the redundant power supplies in a system.
INT dellRedundantPowerSupplyState	1.3.6.1.4.1.674.10891.304.1.0	INTEGER	read-write
NUM pwrSupplyParentIndexAtt1	1.3.6.1.4.1.674.10891.304.1.1	DmiInteger	read-only	The chassis this power supply is connected to.
NUM pwrSupplyIndexAtt2	1.3.6.1.4.1.674.10891.304.1.2	DmiInteger	read-only	The index within the chassis of this power supply.
INT pwrSupplyTypeAtt3	1.3.6.1.4.1.674.10891.304.1.3	INTEGER	read-only	The type of power supply.
INT pwrSupplyStatusAtt4	1.3.6.1.4.1.674.10891.304.1.4	INTEGER	read-only	The current status of this power supply.
STR pwrSupplyOnlineAtt5	1.3.6.1.4.1.674.10891.304.1.5	DmiDisplaystring	read-write	The current online status of this power supply. Setting this value to FALSE will turn off the power supply, setting it to TRUE will turn on the power supply.
STR pwrLocationAtt6	1.3.6.1.4.1.674.10891.304.1.6	DmiDisplaystring	read-only	the location of this power supply within the system.
dellGlobalPowerUnitTable	1.3.6.1.4.1.674.10891.305		not-accessible	This group contains the global status for the power supplies in the system.
NTF dellGlobalPowerUnitEvt1	1.3.6.1.4.1.674.10891.305.0.1			powerSupplyRedundancyChange
NTF dellGlobalPowerUnitEvt2	1.3.6.1.4.1.674.10891.305.0.2			powerSupplyStatusChange
dellGlobalPowerUnitEntry	1.3.6.1.4.1.674.10891.305.1		not-accessible	This group contains the global status for the power supplies in the system.
INT dellGlobalPowerUnitState	1.3.6.1.4.1.674.10891.305.1.0	INTEGER	read-write
INT pwrUnitStatusAtt1	1.3.6.1.4.1.674.10891.305.1.1	INTEGER	read-only	The current redundancy status of the power unit.
NUM pwrUnitGlobalLevelAtt2	1.3.6.1.4.1.674.10891.305.1.2	DmiInteger	read-only	The current global power level usage, in percent.
STR pwrUnitGlobalMaxWarnAtt3	1.3.6.1.4.1.674.10891.305.1.3	DmiDisplaystring	read-write	Warning threshold, in percent
NUM pwrUnitLevel33vAtt4	1.3.6.1.4.1.674.10891.305.1.4	DmiInteger	read-only	The current 3.3v power level usage, in percent.
STR pwrUnitMaxWarn33vAtt5	1.3.6.1.4.1.674.10891.305.1.5	DmiDisplaystring	read-write	Warning threshold, in percent
NUM pwrUnitLevel5vAtt6	1.3.6.1.4.1.674.10891.305.1.6	DmiInteger	read-only	The current 5v power level usage, in percent.
STR pwrUnitMaxWarn5vAtt7	1.3.6.1.4.1.674.10891.305.1.7	DmiDisplaystring	read-write	Warning threshold, in percent
NUM pwrUnitLevel12vAtt8	1.3.6.1.4.1.674.10891.305.1.8	DmiInteger	read-only	The current 12v power level usage, in percent.
STR pwrUnitMaxWarn12vAtt9	1.3.6.1.4.1.674.10891.305.1.9	DmiDisplaystring	read-write	Warning threshold, in percent
STR pwrUnitUidAtt10	1.3.6.1.4.1.674.10891.305.1.10	DmiDisplaystring	read-only	The unique ID for this power supply unit.
NUM pwrUnitIndexAtt11	1.3.6.1.4.1.674.10891.305.1.11	DmiInteger	read-only	The index into the power supply unit table.
INT dellGlobalPowerUnitEvSys	1.3.6.1.4.1.674.10891.305.6	INTEGER	not-accessible
INT dellGlobalPowerUnitEvSub	1.3.6.1.4.1.674.10891.305.7	INTEGER	not-accessible
INT dellGlobalPowerUnitEvSol	1.3.6.1.4.1.674.10891.305.8	INTEGER	not-accessible
dellSystemChassisExtensionTable	1.3.6.1.4.1.674.10891.306		not-accessible	Global status of devices in chassis.
NTF dellSystemChassisExtensionEvt1	1.3.6.1.4.1.674.10891.306.0.1			memoryECCError
dellSystemChassisExtensionEntry	1.3.6.1.4.1.674.10891.306.1		not-accessible	Global status of devices in chassis.
INT dellSystemChassisExtensionState	1.3.6.1.4.1.674.10891.306.1.0	INTEGER	read-write
NUM chassIndexAtt1	1.3.6.1.4.1.674.10891.306.1.1	DmiInteger	read-only	Physical container index
INT chassGlobStatusAtt2	1.3.6.1.4.1.674.10891.306.1.2	INTEGER	read-only	Global status of all devices in chassis.
INT chassTempStatusAtt3	1.3.6.1.4.1.674.10891.306.1.3	INTEGER	read-only	Global status of temperature probes.
STR chassTempProbesAtt4	1.3.6.1.4.1.674.10891.306.1.4	DmiOctetstring	read-only	This contains the statuses of all temp probes in the system, one probe per octet. The value of each octet is the value of the status field.
INT chassFansStatusAtt5	1.3.6.1.4.1.674.10891.306.1.5	INTEGER	read-only	Global status of fan sensors.
STR chassFansProbesAtt6	1.3.6.1.4.1.674.10891.306.1.6	DmiOctetstring	read-only	This contains the statuses of all fan probes in the system, one probe per octet. The value of each octet is the value of the status field.
INT chassVoltStatusAtt7	1.3.6.1.4.1.674.10891.306.1.7	INTEGER	read-only	Global status of voltage probes.
STR chassVoltProbesAtt8	1.3.6.1.4.1.674.10891.306.1.8	DmiOctetstring	read-only	This contains the statuses of all volt probes in the system, one probe per octet. The value of each octet is the value of the status field.
INT chassAmpStatusAtt9	1.3.6.1.4.1.674.10891.306.1.9	INTEGER	read-only	Global status of current probes.
STR chassAmpProbesAtt10	1.3.6.1.4.1.674.10891.306.1.10	DmiOctetstring	read-only	This contains the statuses of all amp probes in the system, one probe per octet. The value of each octet is the value of the status field.
INT chassPsStatusAtt11	1.3.6.1.4.1.674.10891.306.1.11	INTEGER	read-only	Global status of power supplies.
STR chassPwrSuppliesAtt12	1.3.6.1.4.1.674.10891.306.1.12	DmiOctetstring	read-only	This contains the statuses of all power supplies in the system, one probe per octet. The value of each octet is the value of the status field.
STR chassServiceTagAtt13	1.3.6.1.4.1.674.10891.306.1.13	DmiDisplaystring	read-only	This is the service tag for this chassis, if it exists.
STR chassUidAtt14	1.3.6.1.4.1.674.10891.306.1.14	DmiDisplaystring	read-only	This is the Unique ID for this chassis, if it exists.
STR chassBackPlaneUidAtt15	1.3.6.1.4.1.674.10891.306.1.15	DmiDisplaystring	read-only	This is the Unique ID for the backplane in this chassis.
STR chassIdentifyAtt16	1.3.6.1.4.1.674.10891.306.1.16	DmiDisplaystring	read-write	This attribute is used to visually identify a disk pod or other chassis by causing its lights to flash. Setting this value to non-zero turns on the identify, setting it back to zero turns it off.
STR chassFanControlAtt17	1.3.6.1.4.1.674.10891.306.1.17	DmiDisplaystring	read-write	This attribute is used to control the fan speed in a chassis. If the value is 0, then fan control is notavailable. A value of 2 indicates maximum cooling. Avalue of 1 indicates minimize fan noise (and speed).
STR chassLEDConfigAtt18	1.3.6.1.4.1.674.10891.306.1.18	DmiDisplaystring	read-write	This attribute is used to configure which fault conditionscause the fault LED to flash. If the value is 0, thenthis feature is not available. A value of 16 indicatesflash for failure conditions. A value of 8 indicatesfla h for failure and warning conditions.
STR chassFaultClearAtt19	1.3.6.1.4.1.674.10891.306.1.19	DmiDisplaystring	read-write	This attribute is used to clear the hard drive fault LED.If this value is non-zero, then it is available. Writingany value to this attribut will clear the hard drive faultLED.
STR chassThermalShutdownAtt20	1.3.6.1.4.1.674.10891.306.1.20	DmiDisplaystring	read-write	This attribute is used to enable thermal shutdown of a chassis. If the value is -1, then thermal shutdown is notenabled. A value of 5 will shutdown on failures, a value of 4will shutdown on failures and warnings.
INT chassMemStatusAtt21	1.3.6.1.4.1.674.10891.306.1.21	INTEGER	read-only	Global status of Memory Devices.
STR chassMemDevicesAtt22	1.3.6.1.4.1.674.10891.306.1.22	DmiOctetstring	read-only	This contains the statuses of all memory devices in the system, one device per octet. The value of each octet is the value of the status field.
INT dellSystemChassisExtensionEvSys	1.3.6.1.4.1.674.10891.306.6	INTEGER	not-accessible
INT dellSystemChassisExtensionEvSub	1.3.6.1.4.1.674.10891.306.7	INTEGER	not-accessible
INT dellSystemChassisExtensionEvSol	1.3.6.1.4.1.674.10891.306.8	INTEGER	not-accessible
dellEsmLogTable	1.3.6.1.4.1.674.10891.307		not-accessible	ESM Event Log.
dellEsmLogEntry	1.3.6.1.4.1.674.10891.307.1		not-accessible	ESM Event Log.
INT dellEsmLogState	1.3.6.1.4.1.674.10891.307.1.0	INTEGER	read-write
NUM esmLogIndexAtt1	1.3.6.1.4.1.674.10891.307.1.1	DmiInteger	read-only	KEY: The index to this log.
STR esmLogDataAtt2	1.3.6.1.4.1.674.10891.307.1.2	DmiDisplaystring	read-write	The event log data for the ESM.
dellPOSTLogTable	1.3.6.1.4.1.674.10891.308		not-accessible	POST Codes Event Log.
dellPOSTLogEntry	1.3.6.1.4.1.674.10891.308.1		not-accessible	POST Codes Event Log.
INT dellPOSTLogState	1.3.6.1.4.1.674.10891.308.1.0	INTEGER	read-write
NUM postLogIndexAtt1	1.3.6.1.4.1.674.10891.308.1.1	DmiInteger	read-only	KEY: The index into the post log.
STR postLogDataAtt2	1.3.6.1.4.1.674.10891.308.1.2	DmiOctetstring	read-only	The event log data.
dellSecurityTable	1.3.6.1.4.1.674.10891.309		not-accessible	Security Group - contains user database: Used by both DSA and Baseboard components.
dellSecurityEntry	1.3.6.1.4.1.674.10891.309.1		not-accessible	Security Group - contains user database: Used by both DSA and Baseboard components.
INT dellSecurityState	1.3.6.1.4.1.674.10891.309.1.0	INTEGER	read-write
NUM userIndexAtt1	1.3.6.1.4.1.674.10891.309.1.1	DmiInteger	read-only	Keyed ID for this group.
STR userNameAtt2	1.3.6.1.4.1.674.10891.309.1.2	DmiDisplaystring	read-only	User name. First user name is 'create', allows creation.
STR userControlAtt3	1.3.6.1.4.1.674.10891.309.1.3	DmiDisplaystring	read-write	User control. Used for creating/deleting/editing users.
STR requestAtt4	1.3.6.1.4.1.674.10891.309.1.4	DmiDisplaystring	read-write	Request field used for sets.
dellDialupTable	1.3.6.1.4.1.674.10891.310		not-accessible	Dialup Control - contains information used by the ESM dialup interface.
dellDialupEntry	1.3.6.1.4.1.674.10891.310.1		not-accessible	Dialup Control - contains information used by the ESM dialup interface.
INT dialupCapabilityAtt1	1.3.6.1.4.1.674.10891.310.1.1	INTEGER	read-only	Specifies if this system supports dialup.
STR callbackNumberAtt2	1.3.6.1.4.1.674.10891.310.1.2	DmiDisplaystring	read-write	The number to callback when a dialup connection is established.
dellFirmwareTable	1.3.6.1.4.1.674.10891.311		not-accessible	Firmware Information - Contains version/status of firmware.
dellFirmwareEntry	1.3.6.1.4.1.674.10891.311.1		not-accessible	Firmware Information - Contains version/status of firmware.
INT dellFirmwareState	1.3.6.1.4.1.674.10891.311.1.0	INTEGER	read-write
NUM firmwareChassisIndexAtt1	1.3.6.1.4.1.674.10891.311.1.1	DmiInteger	read-only	Firmware chassis index
NUM firmwareIndexAtt2	1.3.6.1.4.1.674.10891.311.1.2	DmiInteger	read-only	Index into the firmware information table
INT firmwareTypeAtt3	1.3.6.1.4.1.674.10891.311.1.3	INTEGER	read-write	The type of this firmware.
STR firmwareVersionAtt4	1.3.6.1.4.1.674.10891.311.1.4	DmiDisplaystring	read-only	Version level of this firmware
INT firmwareStatusAtt5	1.3.6.1.4.1.674.10891.311.1.5	INTEGER	read-only	Current status of this firmware, if applicable
dellSystemResetTable	1.3.6.1.4.1.674.10891.312		not-accessible	This group defines whether System Control functions are availabl and enabled.
NTF dellSystemResetEvt1	1.3.6.1.4.1.674.10891.312.0.1			systemUp
dellSystemResetEntry	1.3.6.1.4.1.674.10891.312.1		not-accessible	This group defines whether System Control functions are availabl and enabled.
NUM automaticCapabilitiesAtt1	1.3.6.1.4.1.674.10891.312.1.1	DmiInteger	read-only	Indicates which Automatic Capabilities are available for the current operating system. Encoding is as follows: 0x1 = Supports Reboot 0x2 = Supports Power Cycle 0x4 = Supports Notification 0x8 = Supports Configurable Timer If value is nonzero, Watchdog is supported.
STR automaticSettingsAtt2	1.3.6.1.4.1.674.10891.312.1.2	DmiDisplaystring	read-write	Indicates which Automatic Settings are enabled by the user. Encoding is as follows: 0x1 = Enabled w/ Reboot 0x2 = Enabled w/ Power Cycle 0x4 = Enabled w/ Notification If value is nonzero, Watchdog is Enabled.
STR notificationNumberAtt3	1.3.6.1.4.1.674.10891.312.1.3	DmiDisplaystring	read-write	The number to dial when the watchdog timer elapses.
NUM manualCapabilitiesAtt4	1.3.6.1.4.1.674.10891.312.1.4	DmiInteger	read-only	Describes which system reset actions may occur.Bit encodings: 0x1 = Reboot 0x2 = Power Off 0x4 = Power Cycle 0x8 = Shutdown OS
STR manualControlAtt5	1.3.6.1.4.1.674.10891.312.1.5	DmiDisplaystring	read-write	Setting this value will immediately perform one of the following functions. Encoding as follows: Bit encoding: 0x1 = Reboot 0x2 = Power Off 0x4 = Power Cycle 0x8 = Shutdown OS
STR automaticSystemResetTimerAtt6	1.3.6.1.4.1.674.10891.312.1.6	DmiDisplaystring	read-write	Automatic System Reset Timer in seconds. Minimum value is 20 seconds.
INT dellSystemResetEvSys	1.3.6.1.4.1.674.10891.312.6	INTEGER	not-accessible
INT dellSystemResetEvSub	1.3.6.1.4.1.674.10891.312.7	INTEGER	not-accessible
INT dellSystemResetEvSol	1.3.6.1.4.1.674.10891.312.8	INTEGER	not-accessible
dELLSystemsManagementSoftwareTable	1.3.6.1.4.1.674.10891.400		not-accessible	This group defines the attributes of the management software which instruments this component.
dELLSystemsManagementSoftwareEntry	1.3.6.1.4.1.674.10891.400.1		not-accessible	This group defines the attributes of the management software which instruments this component.
STR productAtt1	1.3.6.1.4.1.674.10891.400.1.1	DmiDisplaystring	read-only	The name of the Systems Management Software product that instruments this component.
STR versionAtt2	1.3.6.1.4.1.674.10891.400.1.2	DmiDisplaystring	read-only	The version for the Systems Management Software.
NUM buildNumberAtt3	1.3.6.1.4.1.674.10891.400.1.3	DmiInteger	read-only	The build number of this Systems Management Software product.
STR descriptionAtt4	1.3.6.1.4.1.674.10891.400.1.4	DmiDisplaystring	read-only	A description of this Systems Management Software product.
NUM supportedProtocolsAtt5	1.3.6.1.4.1.674.10891.400.1.5	DmiInteger	read-only	This is a bit map field which is used to list protocols which can be used to access the systems management information. This is a bit map where a value of 1 indicates that the protocol is supported. Values are based on the Protocol-Type enum. Mappers will be listed in this list, but not as preferred protocols.
INT preferredProtocolAtt6	1.3.6.1.4.1.674.10891.400.1.6	INTEGER	read-only	This is a field which is used to indicate which protocol is the preferred method for gathering management information. This is value is set by the instrumentation based on performance and features of protocols available.
STR dMIRPCTypesAtt7	1.3.6.1.4.1.674.10891.400.1.7	DmiDisplaystring	read-only	This field describes the RPC type, if any, for instance DCE:ncac -ip-tcp or ONC:tcpip. A semi-colon may seperate multiple supports, such as DCE:ncasn-ip-tcp;ONC:tcpip. This field should be empty if DMI RPC is not supported.
dELLSystemsSummaryInformationTable	1.3.6.1.4.1.674.10891.402		not-accessible	This group provides minimal summarization information about a system.
dELLSystemsSummaryInformationEntry	1.3.6.1.4.1.674.10891.402.1		not-accessible	This group provides minimal summarization information about a system.
INT operatingSystemAtt1	1.3.6.1.4.1.674.10891.402.1.1	INTEGER	read-only	This is the operating system which is installed and running on the system.
INT systemClassAtt2	1.3.6.1.4.1.674.10891.402.1.2	INTEGER	read-only	This is the system type which is installed and running the instrumentation.
dellMemoryPrefailureTable	1.3.6.1.4.1.674.10891.403		not-accessible	This group provides information about a memory prefailure condition described in the operational state of the memory device.
dellMemoryPrefailureEntry	1.3.6.1.4.1.674.10891.403.1		not-accessible	This group provides information about a memory prefailure condition described in the operational state of the memory device.
INT dellMemoryPrefailureState	1.3.6.1.4.1.674.10891.403.1.0	INTEGER	read-write
NUM memoryDeviceIndexAtt1	1.3.6.1.4.1.674.10891.403.1.1	DmiInteger	read-only	This is the index into the memory device table.
NUM resetMemoryDeviceErrorCountAndPrefailureStatusAtt2	1.3.6.1.4.1.674.10891.403.1.2	DmiInteger	read-write	Writing a non-zero value to this field will reset the memory device prefailure status and error count.

RFC description

SNMP MIB module for managing and monitoring BASEBRDD network devices. Provides access to device performance metrics and operational parameters through standard SNMP management interfaces.

Start monitoring Dell server/network appliance hardware (baseboard management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BASEBRDD-MIB-MIB

What Is BASEBRDD-MIB-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description