INTELETHEREXPRESSTMPRO100BLANADAPTER-MIB

All MIBs › INTELETHEREXPRESSTMPRO100BLANADAPTER-MIB

Category: Domain: Server Hardware, Network Interfaces, Vendor: Intel

Description: Intel EtherExpress PRO/100 BLA (Blade) LAN adapter MIB providing SNMP objects for blade network interface card statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is INTELETHEREXPRESSTMPRO100BLANADAPTER-MIB?

INTELETHEREXPRESSTMPRO100BLANADAPTER-MIB is a vendor-specific MIB for Intel's EtherExpress PRO/100 Blade LAN Adapter (BLA), following Intel's common DMI-style component-registration MIB pattern seen across several Intel management modules. It exposes hardware inventory objects - manufacturer, product name, firmware/driver version, and serial number - together with installation/verification flags and system resource description and device count fields. Its monitoring emphasis is hardware identification and installation-status verification: confirming the correct adapter model and firmware revision are installed, tracking serial numbers for asset purposes, and checking that the card enumerated successfully after boot. It shares the Intel/DMI component-registration convention used across the related LANDesk Server Manager MIB family. It is deployed on servers fitted with Intel EtherExpress PRO/100 blade LAN adapter cards, typically managed through Intel LANDesk Server Manager. Engineers can download the INTELETHEREXPRESSTMPRO100BLANADAPTER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in INTELETHEREXPRESSTMPRO100BLANADAPTER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Intel EtherExpress PRO/100 blade LAN adapter (server NIC)

Monitoring Examples

a1Manufacturer, a1Product, and a1Version identify the specific PRO/100 BLA adapter model and its firmware/driver revision, while a1SerialNumber supports asset tracking. a1Installation and a1Verify flag whether the adapter was properly detected and installed, and a2DeviceCount alongside eSystemResourcesDescription/tSystemResourcesDescription reveals how many adapter instances are present, useful for spotting a card that failed to enumerate after a reboot.

What Can Be Monitored

adapter manufacturer/product/version
serial number
installation and verification status
device/adapter count
system resource description

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
STR a10BootRomDescription	1.3.6.1.4.1.343.2.6.4.1.1.10.1.1	DmiDisplaystring	read-only	This is the description of the software contained in the boot ROM.
STR a10BootRomVersion	1.3.6.1.4.1.343.2.6.4.1.1.10.1.2	DmiDisplaystring	read-only	This is the version number of the boot ROM software.
INT a10RemoteBootProtocolType	1.3.6.1.4.1.343.2.6.4.1.1.10.1.3	INTEGER	read-only	This is the type of remote boot protocol supported by this ROM.
STR a10RemoteBootProtocolVersion	1.3.6.1.4.1.343.2.6.4.1.1.10.1.4	DmiDisplaystring	read-only	The version of the remote boot protocol supported by this ROM.
STR a11CapabilityDescription	1.3.6.1.4.1.343.2.6.4.1.1.11.1.2	DmiDisplaystring	read-only	This is a clear description of a property or special feature of the ROM, e.g. 'virus protection'.
NUM a11CapabilityIndex	1.3.6.1.4.1.343.2.6.4.1.1.11.1.1	DmiInteger	read-only	This is an arbitrary number assigned to each capability.Capabili y Index usually starts with 1 and increments for each additional capability.
STR a11CapabilityStatus	1.3.6.1.4.1.343.2.6.4.1.1.11.1.3	DmiDisplaystring	read-only	The current state or value associated with the capability or special feature, e.g. 'enabled', 'active', etc.
DMI a12DriverDate	1.3.6.1.4.1.343.2.6.4.1.1.12.1.2	DmiDateX	read-only	The timestamp of the LAN adapter driver.
STR a12DriverFilename	1.3.6.1.4.1.343.2.6.4.1.1.12.1.1	DmiDisplaystring	read-only	The filename of the LAN adapter driver.
STR a12InstrumentationVersion	1.3.6.1.4.1.343.2.6.4.1.1.12.1.4	DmiDisplaystring	read-only	The version number of component instrumentation.
STR a12MifAndInstrumentationFilename	1.3.6.1.4.1.343.2.6.4.1.1.12.1.3	DmiDisplaystring	read-only
STR a12MifVersion	1.3.6.1.4.1.343.2.6.4.1.1.12.1.5	DmiDisplaystring	read-only	This is the version of the MIF file
INT a151IndicationEnable	1.3.6.1.4.1.343.2.6.4.1.1.151.1.2	INTEGER	read-write	Used to control indications
NUM a151PortIndex	1.3.6.1.4.1.343.2.6.4.1.1.151.1.1	DmiInteger	read-only	This attribute is the ordinal of the network port within the network adapter, i.e. the 'port number'.
NUM a151TotalHostErrorsThreshold	1.3.6.1.4.1.343.2.6.4.1.1.151.1.8	DmiCounter64X	read-write	This is a threshold value used to trigger indications when the total number of host errors exceed this value
INT a151TotalHostIndicationEnable	1.3.6.1.4.1.343.2.6.4.1.1.151.1.7	INTEGER	read-write	Used to control indications
NUM a151TotalReceiveErrorsThreshold	1.3.6.1.4.1.343.2.6.4.1.1.151.1.6	DmiCounter64X	read-write	This is a threshold value used to trigger indications when the total number of receive errors exceed this value
INT a151TotalReceiveIndicationEnable	1.3.6.1.4.1.343.2.6.4.1.1.151.1.5	INTEGER	read-write	Used to control indications
NUM a151TotalTransmitErrorsThreshold	1.3.6.1.4.1.343.2.6.4.1.1.151.1.4	DmiCounter64X	read-write	This is a threshold value used to trigger indications when the total number of transfer errors exceed this value
INT a151TotalTransmitIndicationEnable	1.3.6.1.4.1.343.2.6.4.1.1.151.1.3	INTEGER	read-write	Used to control indications
NUM a151TotalWireErrorsThreshold	1.3.6.1.4.1.343.2.6.4.1.1.151.1.10	DmiCounter64X	read-write	This is a threshold value used to trigger indications when the total number of wire errors exceed this value
INT a151TotalWireIndicationEnable	1.3.6.1.4.1.343.2.6.4.1.1.151.1.9	INTEGER	read-write	Used to control indications
INT a152Errstatus	1.3.6.1.4.1.343.2.6.4.1.1.152.1.5	INTEGER	read-only	current error status
INT a152Errstatustype	1.3.6.1.4.1.343.2.6.4.1.1.152.1.6	INTEGER	read-only	Indicates the type of detection that set the current error status.
NUM a152Fatalcount	1.3.6.1.4.1.343.2.6.4.1.1.152.1.2	DmiCounter	read-only	Count of all fatal errors since system startup.
NUM a152Majorcount	1.3.6.1.4.1.343.2.6.4.1.1.152.1.3	DmiCounter	read-only	Count of all major errors since system startup.
NUM a152Selfid	1.3.6.1.4.1.343.2.6.4.1.1.152.1.1	DmiInteger	read-only	Instance identifer. A unique number that identifies this row.
NUM a152Warningcount	1.3.6.1.4.1.343.2.6.4.1.1.152.1.4	DmiCounter	read-only	Count of all warning errors since system startup.
NUM a153DisableTrap	1.3.6.1.4.1.343.2.6.4.1.1.153.1.3	DmiInteger	read-write	Used to dissable the SNMP trap
STR a153MibName	1.3.6.1.4.1.343.2.6.4.1.1.153.1.1	DmiDisplaystring	read-only	The MIB name that defines this MIF
STR a153MibOid	1.3.6.1.4.1.343.2.6.4.1.1.153.1.2	DmiDisplaystring	read-only	The MIB OID that corresponds to this MIF
DMI a1Installation	1.3.6.1.4.1.343.2.6.4.1.1.1.1.5	DmiDateX	read-only	The date of the install of this component.
STR a1Manufacturer	1.3.6.1.4.1.343.2.6.4.1.1.1.1.1	DmiDisplaystring	read-only	Manufacturer of this component.
STR a1Product	1.3.6.1.4.1.343.2.6.4.1.1.1.1.2	DmiDisplaystring	read-only	Product name for this component.
STR a1SerialNumber	1.3.6.1.4.1.343.2.6.4.1.1.1.1.4	DmiDisplaystring	not-accessible	Serial number for this component.
INT a1Verify	1.3.6.1.4.1.343.2.6.4.1.1.1.1.6	INTEGER	read-only	A code that provides a level of verification that the component is still installed and working.
STR a1Version	1.3.6.1.4.1.343.2.6.4.1.1.1.1.3	DmiDisplaystring	not-accessible	Version number of this component.
NUM a2DeviceCount	1.3.6.1.4.1.343.2.6.4.1.1.2.1.1	DmiInteger	read-only	A count of the number of different hardware devices represented in this table.
NUM a2SystemResourceCount	1.3.6.1.4.1.343.2.6.4.1.1.2.1.2	DmiInteger	read-only	A count of the total number of system resources on this system.
NUM a3DeviceId	1.3.6.1.4.1.343.2.6.4.1.1.3.1.1	DmiInteger	read-only	On systems that implement a PnP-like subsystem, the device ID should be the ID used by that subsystem. On systems that do not have inherent device numbering, then the instrumentation supporting the system resources group should devise a device number scheme. In either case, the table will naturally group all of the resources associated with a device.
NUM a3GroupId	1.3.6.1.4.1.343.2.6.4.1.1.3.1.7	DmiInteger	read-only	This attribute is a 'back pointer' to a group within this MIF, if applicable. If the back pointer is not known, either because the device is not represented by a group, or the actual device type is not known, then the value of this attribute will be 0.
NUM a3ResourceBase	1.3.6.1.4.1.343.2.6.4.1.1.3.1.4	DmiInteger	read-only	The starting address of the system resource in the appropriate address space.
NUM a3ResourceFlags	1.3.6.1.4.1.343.2.6.4.1.1.3.1.6	DmiInteger	not-accessible	This attribute contains fields representing the status of this resource entry. The meaning of this field varies according to the Resource Type field in this group.
NUM a3ResourceNumber	1.3.6.1.4.1.343.2.6.4.1.1.3.1.2	DmiInteger	read-only	This attribute is the ordinal of the resource within a device. Within the table, any device may have one or more resources.
NUM a3ResourceSize	1.3.6.1.4.1.343.2.6.4.1.1.3.1.5	DmiInteger	read-only	The size of the system resource.
INT a3ResourceType	1.3.6.1.4.1.343.2.6.4.1.1.3.1.3	INTEGER	read-only	The type of system resource represented by this entry.
INT a4ConnectorType	1.3.6.1.4.1.343.2.6.4.1.1.4.1.4	INTEGER	read-only	This is the type of connector currently being used to physically attach this port to the LAN.
STR a4CurrentNetworkAddress	1.3.6.1.4.1.343.2.6.4.1.1.4.1.3	DmiDisplaystring	read-only	This is the node address that can be modified by software, sometimes referred to as the Locally Administered Address (LAA).
NUM a4DataRate	1.3.6.1.4.1.343.2.6.4.1.1.4.1.5	DmiInteger	read-only	This is the rate at which data is transferred over the LAN in Mbps.
STR a4PermanentNetworkAddress	1.3.6.1.4.1.343.2.6.4.1.1.4.1.2	DmiDisplaystring	read-only	This is the node address stored permanently in the adapter.
NUM a4PortIndex	1.3.6.1.4.1.343.2.6.4.1.1.4.1.1	DmiInteger	read-only	This attribute is the ordinal of the network port within the network adapter, i.e. the 'port number'.
NUM a4TotalBytesReceived	1.3.6.1.4.1.343.2.6.4.1.1.4.1.9	DmiCounter64X	read-only	This is the total number of bytes received.
NUM a4TotalBytesTransmitted	1.3.6.1.4.1.343.2.6.4.1.1.4.1.7	DmiCounter64X	read-only	This is the total number of bytes transmitted.
NUM a4TotalHostErrors	1.3.6.1.4.1.343.2.6.4.1.1.4.1.12	DmiCounter64X	read-only	This is the total number of errors due to problems with the network adapter host interface (e.g. overrun / underrun errors).
NUM a4TotalPacketsReceived	1.3.6.1.4.1.343.2.6.4.1.1.4.1.8	DmiCounter64X	read-only	This is the total number packets received.
NUM a4TotalPacketsTransmitted	1.3.6.1.4.1.343.2.6.4.1.1.4.1.6	DmiCounter64X	read-only	This is the total number of packets transmitted.
NUM a4TotalReceiveErrors	1.3.6.1.4.1.343.2.6.4.1.1.4.1.11	DmiCounter64X	read-only	This is the total number of receive errors of any type.
NUM a4TotalTransmitErrors	1.3.6.1.4.1.343.2.6.4.1.1.4.1.10	DmiCounter64X	read-only	This is the total number of transmit errors of any type.
NUM a4TotalWireErrors	1.3.6.1.4.1.343.2.6.4.1.1.4.1.13	DmiCounter64X	read-only	This is the total number of either receive or transmit errors due to problems with the network (e.g. receive CRC Errors).
INT a5AddressType	1.3.6.1.4.1.343.2.6.4.1.1.5.1.3	INTEGER	not-accessible	This is the type of alternate address, e.g. multicast, functiona , etc.
STR a5AlternateAddress	1.3.6.1.4.1.343.2.6.4.1.1.5.1.4	DmiDisplaystring	not-accessible	This is the actual alternate address value.
NUM a5AlternateAddressIndex	1.3.6.1.4.1.343.2.6.4.1.1.5.1.1	DmiInteger	not-accessible	This is an arbitrary number assigned to each alternate address. The Alternate Address Index usually starts with 1 and increments for each alternate address.
NUM a5PortIndex	1.3.6.1.4.1.343.2.6.4.1.1.5.1.2	DmiInteger	not-accessible	The value of the Port Index attribute for the network port that uses this alternate address, i.e. the 'port number'.
NUM a6DriverIndex	1.3.6.1.4.1.343.2.6.4.1.1.6.1.1	DmiInteger	read-only	This is an arbitrary number assigned to each device driver. Driver Index usually starts with 1 and increments for each additional device driver.
STR a6DriverInterfaceDescription	1.3.6.1.4.1.343.2.6.4.1.1.6.1.8	DmiDisplaystring	read-only	An expanded description of the driver interface specification in use.
INT a6DriverInterfaceType	1.3.6.1.4.1.343.2.6.4.1.1.6.1.6	INTEGER	read-only	This is the specification or network operating system to which this LAN driver conforms, e.g. IPX, NDIS, etc.
STR a6DriverInterfaceVersion	1.3.6.1.4.1.343.2.6.4.1.1.6.1.7	DmiDisplaystring	read-only	This is the version of the driver interface specification, e.g. for NDIS, this attribute could be 2.01, 3.0, etc.
NUM a6DriverSize	1.3.6.1.4.1.343.2.6.4.1.1.6.1.5	DmiInteger	read-only	This is the resident memory size of the driver in bytes.
STR a6DriverSoftwareDescription	1.3.6.1.4.1.343.2.6.4.1.1.6.1.4	DmiDisplaystring	read-only	This is an expanded description of the device driver software.
STR a6DriverSoftwareName	1.3.6.1.4.1.343.2.6.4.1.1.6.1.2	DmiDisplaystring	read-only	This is the sign-on name of the driver.
STR a6DriverSoftwareVersion	1.3.6.1.4.1.343.2.6.4.1.1.6.1.3	DmiDisplaystring	read-only	This is the revision level of the driver software.
INT a7BusType	1.3.6.1.4.1.343.2.6.4.1.1.7.1.4	INTEGER	read-only	This is the type of bus used to interface the adapter to the host.
INT a7BusWidth	1.3.6.1.4.1.343.2.6.4.1.1.7.1.5	INTEGER	read-only	This is the width (in bits) of the data path used to interface the adapter to the host.
NUM a7NetworkAdapterRamSize	1.3.6.1.4.1.343.2.6.4.1.1.7.1.3	DmiInteger	read-only	This is the total size of adapter RAM in Kb.
INT a7NetworkTopology	1.3.6.1.4.1.343.2.6.4.1.1.7.1.1	INTEGER	read-only	This is the network media access method/topology supported by this adapter.
INT a7TransmissionCapability	1.3.6.1.4.1.343.2.6.4.1.1.7.1.2	INTEGER	read-only	The transmission capabilities of the adapter.
INT a8AdministrativeState	1.3.6.1.4.1.343.2.6.4.1.1.8.1.6	INTEGER	read-only	The administrative state of the Device Group instance.
INT a8AvailabilityStatus	1.3.6.1.4.1.343.2.6.4.1.1.8.1.5	INTEGER	read-only	The availability status of the Device Group instance.
NUM a8DeviceGroupIndex	1.3.6.1.4.1.343.2.6.4.1.1.8.1.2	DmiInteger	read-only	The group ID of the group referencing this instance.
NUM a8FatalErrorCount	1.3.6.1.4.1.343.2.6.4.1.1.8.1.7	DmiCounter	read-only	The accumulated fatal error count for this Device Group Instance
NUM a8MajorErrorCount	1.3.6.1.4.1.343.2.6.4.1.1.8.1.8	DmiCounter	read-only	The accumulated major error count for this Device Group Instance
NUM a8OperationalStateInstanceIndex	1.3.6.1.4.1.343.2.6.4.1.1.8.1.1	DmiInteger	read-only	The Index into the Operational State table.
INT a8OperationalStatus	1.3.6.1.4.1.343.2.6.4.1.1.8.1.3	INTEGER	read-only	The operational status of the Device group instance.
INT a8UsageState	1.3.6.1.4.1.343.2.6.4.1.1.8.1.4	INTEGER	read-only	The usage state of the Device Group instance.
NUM a8WarningErrorCount	1.3.6.1.4.1.343.2.6.4.1.1.8.1.9	DmiCounter	read-only	The accumulated warning error count for this Device Group Instance.
NUM a9999ComponentId	1.3.6.1.4.1.343.2.6.4.1.1.9999.1.5	DmiInteger	read-only	Component ID of the component that caused this error
NUM a9999ErrorGroupId	1.3.6.1.4.1.343.2.6.4.1.1.9999.1.3	DmiInteger	read-only	Group ID of the errorControl Group
NUM a9999ErrorInstanceId	1.3.6.1.4.1.343.2.6.4.1.1.9999.1.4	DmiInteger	read-only	Instance ID of the errorControl Group
NUM a9999ErrorStatus	1.3.6.1.4.1.343.2.6.4.1.1.9999.1.2	DmiInteger	read-only	Error Status Code
STR a9999ErrorTime	1.3.6.1.4.1.343.2.6.4.1.1.9999.1.1	DisplayString	read-only	The Date & Time when the error occured
NUM a9999GroupId	1.3.6.1.4.1.343.2.6.4.1.1.9999.1.6	DmiInteger	read-only	Group ID of the Group that caused this error
NUM a9999InstanceId	1.3.6.1.4.1.343.2.6.4.1.1.9999.1.7	DmiInteger	read-only	Instance ID of the Group that caused this error
NUM a9999ParentGroupId	1.3.6.1.4.1.343.2.6.4.1.1.9999.1.11	DmiInteger	read-only	Group ID of parent of Group that caused this error
NUM a9999ParentInstanceId	1.3.6.1.4.1.343.2.6.4.1.1.9999.1.12	DmiInteger	read-only	Instance ID of parent of Group that caused this error
NUM a9999VendorCode1	1.3.6.1.4.1.343.2.6.4.1.1.9999.1.8	DmiInteger	read-only	Vendor specific code 1
NUM a9999VendorCode2	1.3.6.1.4.1.343.2.6.4.1.1.9999.1.9	DmiInteger	read-only	Vendor specific code 2
OCT a9999VendorText	1.3.6.1.4.1.343.2.6.4.1.1.9999.1.10	OCTET STRING	read-only	Vendor specific octet string info
STR a9Description	1.3.6.1.4.1.343.2.6.4.1.1.9.1.3	DmiDisplaystring	read-only	A clear description of this Field Replaceable Unit.
NUM a9DeviceGroupIndex	1.3.6.1.4.1.343.2.6.4.1.1.9.1.2	DmiInteger	read-only	The group ID of the group referencing this Field Replaceable Unit instance.
NUM a9FruIndex	1.3.6.1.4.1.343.2.6.4.1.1.9.1.1	DmiInteger	read-only	The index into the Field Replaceable Unit table.
STR a9FruSerialNumber	1.3.6.1.4.1.343.2.6.4.1.1.9.1.7	DmiDisplaystring	not-accessible	The manufacturer's serial number for this Field Replaceable Unit.
STR a9Manufacturer	1.3.6.1.4.1.343.2.6.4.1.1.9.1.4	DmiDisplaystring	read-only	The name of the company manufacturing or providing this Field Replaceable Unit.
STR a9Model	1.3.6.1.4.1.343.2.6.4.1.1.9.1.5	DmiDisplaystring	read-only	The manufacturer's model number for this Field Replaceable Unit.
STR a9PartNumber	1.3.6.1.4.1.343.2.6.4.1.1.9.1.6	DmiDisplaystring	not-accessible	A part number by which a replacement part can be ordered for this Field Replaceable Unit.
STR a9RevisionLevel	1.3.6.1.4.1.343.2.6.4.1.1.9.1.8	DmiDisplaystring	not-accessible	The revision level of this Field Replaceable Unit.
STR a9SupportPhoneNumber	1.3.6.1.4.1.343.2.6.4.1.1.9.1.11	DmiDisplaystring	read-only	The phone number(s) for support for this Field Replaceable Unit.
NUM a9WarrantyDuration	1.3.6.1.4.1.343.2.6.4.1.1.9.1.10	DmiInteger	read-only	The total duration of this Field Replaceable Unit Warranty in months. (9999 = Lifetime).
DMI a9WarrantyStartDate	1.3.6.1.4.1.343.2.6.4.1.1.9.1.9	DmiDateX	read-only	The start date of the service Warranty for this Field Replaceabl Unit.
dmtfGroups	1.3.6.1.4.1.343.2.6.4.1.1
e100b	1.3.6.1.4.1.343.2.6.4.1
NTF e100bEventError	1.3.6.1.4.1.343.2.6.4.1.1.9999.1.0.1			DMI Service Layer generated event for E100B Adapter
e802AlternateAddressGroup	1.3.6.1.4.1.343.2.6.4.1.1.5.1		not-accessible
eBootRomCapabilities	1.3.6.1.4.1.343.2.6.4.1.1.11.1		not-accessible
eBootRomConfiguration	1.3.6.1.4.1.343.2.6.4.1.1.10.1		not-accessible
eComponentid	1.3.6.1.4.1.343.2.6.4.1.1.1.1		not-accessible
eErrorcontrol	1.3.6.1.4.1.343.2.6.4.1.1.152.1		not-accessible
eFruTable	1.3.6.1.4.1.343.2.6.4.1.1.9.1		not-accessible
eIndication_control_group	1.3.6.1.4.1.343.2.6.4.1.1.151.1		not-accessible
eIntellanadapterextensionsgroup	1.3.6.1.4.1.343.2.6.4.1.1.12.1		not-accessible
eMiftomib	1.3.6.1.4.1.343.2.6.4.1.1.153.1		not-accessible
eNetworkAdapter802PortGroup	1.3.6.1.4.1.343.2.6.4.1.1.4.1		not-accessible
eNetworkAdapterDriverGroup	1.3.6.1.4.1.343.2.6.4.1.1.6.1		not-accessible
eNetworkAdapterHardwareGroup	1.3.6.1.4.1.343.2.6.4.1.1.7.1		not-accessible
eOperationalState	1.3.6.1.4.1.343.2.6.4.1.1.8.1		not-accessible
eSystemResources	1.3.6.1.4.1.343.2.6.4.1.1.3.1		not-accessible
eSystemResourcesDescription	1.3.6.1.4.1.343.2.6.4.1.1.2.1		not-accessible
eTrapGroup	1.3.6.1.4.1.343.2.6.4.1.1.9999.1		not-accessible
intel	1.3.6.1.4.1.343
nic	1.3.6.1.4.1.343.2.6.4
products	1.3.6.1.4.1.343.2
server_products	1.3.6.1.4.1.343.2.6
t802AlternateAddressGroup	1.3.6.1.4.1.343.2.6.4.1.1.5		not-accessible	Contains objects related to alternate addresses for each network adapter port.
tBootRomCapabilities	1.3.6.1.4.1.343.2.6.4.1.1.11		not-accessible	This group describes the capabilities or special features supported by this ROM.
tBootRomConfiguration	1.3.6.1.4.1.343.2.6.4.1.1.10		not-accessible	This group describes the characteristics of the boot ROM.
tComponentid	1.3.6.1.4.1.343.2.6.4.1.1.1		not-accessible	This group defines attributes common to all components. This group is required.
tErrorcontrol	1.3.6.1.4.1.343.2.6.4.1.1.152		not-accessible	Indication control and status for the parent group
tFruTable	1.3.6.1.4.1.343.2.6.4.1.1.9		not-accessible	A Field Replaceable Unit (FRU), is defined as a hardware component which is designed to be separately removable
tIndication_control_group	1.3.6.1.4.1.343.2.6.4.1.1.151		not-accessible	This group defines the indication control settings for the LAN instrumentation
tIntellanadapterextensionsgroup	1.3.6.1.4.1.343.2.6.4.1.1.12		not-accessible	These attributes provide extended information for use with Intel software.
tMiftomib	1.3.6.1.4.1.343.2.6.4.1.1.153		not-accessible	This group defines attributes required for DMI to SNMP translati n
tNetworkAdapter802PortGroup	1.3.6.1.4.1.343.2.6.4.1.1.4		not-accessible	Contains objects related to each of the network ports on the network adapter.
tNetworkAdapterDriverGroup	1.3.6.1.4.1.343.2.6.4.1.1.6		not-accessible	Contains objects related to the network adapter device drivers currently in use.
tNetworkAdapterHardwareGroup	1.3.6.1.4.1.343.2.6.4.1.1.7		not-accessible	Contains objects related to the network adapter hardware.
tOperationalState	1.3.6.1.4.1.343.2.6.4.1.1.8		not-accessible	This group provides the operational state, usage, availability status, and administrative state indicators for specific Device Group instances.
tSystemResources	1.3.6.1.4.1.343.2.6.4.1.1.3		not-accessible	The System Resources group contains hardware descriptions which are commonly used on PC style computers such as IRQs, IO ports, and memory address ranges.
tSystemResourcesDescription	1.3.6.1.4.1.343.2.6.4.1.1.2		not-accessible	The System Resources Description group describes the number of entries in the System Resources Group.
tTrapGroup	1.3.6.1.4.1.343.2.6.4.1.1.9999		not-accessible	This group defines attributes needed for Trap definition. This group does not exist in MIF file

RFC description

Intel EtherExpress TMPro 100 LAN adapter management MIB defining device attributes and status monitoring.

Start monitoring Intel LAN adapters with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download INTELETHEREXPRESSTMPRO100BLANADAPTER-MIB

What Is INTELETHEREXPRESSTMPRO100BLANADAPTER-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description