AISLCANALOG-MIB

All MIBs › AISLCANALOG-MIB

Organization: Applied Innovation Inc.

Last Updated: 2000-02-18

Category: Network Interfaces

Description: Manages analog port parameters on AI-series Serial Line Card modules including modem and voice port configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is AISLCANALOG-MIB?

AISLCANALOG-MIB is a vendor-specific MIB for AI-series Serial Line Card (SLC) modules, managing analog input points such as modem and voice port configuration on those cards. It exposes a table of analog input points with scanning enable/disable, descriptive text, and alarm-related configuration including trap enable, normal/high/low alarm severities and associated state-text messages. Its monitoring focus is on the operational status of analog line/voice ports - whether scanning is active, whether a point is in a high or low alarm condition, and the severity/description of that alarm state - which is effectively a software/configuration-driven view of analog hardware port health. It is a self-contained vendor MIB for the AI-series SLC hardware line, without an apparent dependency on standard IETF MIBs. It is typically deployed on AI-series remote terminal units or access devices with analog serial line cards used for modem or voice-grade analog circuits. Engineers can download the AISLCANALOG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in AISLCANALOG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

AI-series Serial Line Card (SLC) analog module

Monitoring Examples

An operator would walk aiSLCAnalogInputTable/aiSLCAnalogInputEntry via aislcainPointNumber, checking aislcainScanningEnabled to confirm the point is actively monitored and aislcainDescription to identify it. If an analog input crosses a threshold, aislcainHighAlarmSeverity or aislcainLowAlarmSeverity along with aislcainHighAlarmStateText/aislcainLowAlarmStateText would report the alarm condition and its severity, versus aislcainNormalStateText when back in range. A point stuck reporting its high-alarm state text would indicate a persistent analog circuit issue such as an out-of-range modem or voice signal.

What Can Be Monitored

analog input scanning status
point description
high/low alarm severity
alarm state text
normal state status
trap enable status

Imported Objects

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
aii	1.3.6.1.4.1.539
INT aislcainAnalogAlarmState	1.3.6.1.4.1.539.28.1.1.46	INTEGER	read-only	The point's current alarm state, or normal(5).
INT aislcainAnalogStatus	1.3.6.1.4.1.539.28.1.1.44	INTEGER	read-only	The current alarm status of the analog input.
STR aislcainCurrentStateText	1.3.6.1.4.1.539.28.1.1.45	DisplayString	read-only	Textual description of the point's current state. This is either aislcainNormalStateText or aislcainAlarmStateText.
STR aislcainCurrentValuemA	1.3.6.1.4.1.539.28.1.1.27	DisplayString	read-only	The current input value in mA.
STR aislcainCurrentValueuu	1.3.6.1.4.1.539.28.1.1.26	DisplayString	read-only	The current input value in user-defined units.
STR aislcainDescription	1.3.6.1.4.1.539.28.1.1.3	DisplayString	read-write	Textual description of the point. Maximum length is 80 characters.
STR aislcainHighAlarmHysteresisuu	1.3.6.1.4.1.539.28.1.1.20	DisplayString	read-write	The amount by which the input must drop below the High Alarm Threshold before the High Alarm will be cleared.
INT aislcainHighAlarmMinPeriod	1.3.6.1.4.1.539.28.1.1.19	INTEGER	read-write	The minimum number of seconds the input(s) should be energized when the input exceeds the high alarm threshold.
INT aislcainHighAlarmSeverity	1.3.6.1.4.1.539.28.1.1.6	INTEGER	read-write	Severity of the point's alarm state, or notReported(5) if the point does not generate an alarm.
STR aislcainHighAlarmStateText	1.3.6.1.4.1.539.28.1.1.7	DisplayString	read-write	Textual description of the point's alarm state. Maximum length is 80 characters.
STR aislcainHighAlarmThresholdIntervaluu	1.3.6.1.4.1.539.28.1.1.18	DisplayString	read-write	The high alarm level threshold interval in user-defined units. When the high alarm is active, each time the input rises another interval higher, a new alarm is sent.
STR aislcainHighAlarmThresholduu	1.3.6.1.4.1.539.28.1.1.17	DisplayString	read-write	The high alarm level in user-defined units.
INT aislcainHighLimitScan	1.3.6.1.4.1.539.28.1.1.16	INTEGER	read-write	If enabled, the high limit threshold will be checked when the input is scanned.
STR aislcainLastChangeTime	1.3.6.1.4.1.539.28.1.1.28	DisplayString	read-only	Textural representation of the time of the most recent output change. 24-hour format YYYY-MM-DD HH:MM:SS.
STR aislcainLowAlarmHysteresisuu	1.3.6.1.4.1.539.28.1.1.25	DisplayString	read-write	The amount by which the input must rise above the Low Alarm Threshold before the Low Alarm will be cleared.
INT aislcainLowAlarmMinPeriod	1.3.6.1.4.1.539.28.1.1.24	INTEGER	read-write	The minimum number of seconds the input(s) should be energized when the input falls below the low alarm threshold.
INT aislcainLowAlarmSeverity	1.3.6.1.4.1.539.28.1.1.8	INTEGER	read-write	Severity of the point's alarm state, or notReported(5) if the point does not generate an alarm.
STR aislcainLowAlarmStateText	1.3.6.1.4.1.539.28.1.1.9	DisplayString	read-write	Textual description of the point's alarm state. Maximum length is 80 characters.
STR aislcainLowAlarmThresholdIntervaluu	1.3.6.1.4.1.539.28.1.1.23	DisplayString	read-write	The low alarm level threshold interval in user-defined units. When the low alarm is active, each time the input drops another interval lower, a new alarm is sent.
STR aislcainLowAlarmThresholduu	1.3.6.1.4.1.539.28.1.1.22	DisplayString	read-write	The low alarm level in user-defined units.
INT aislcainLowLimitScan	1.3.6.1.4.1.539.28.1.1.21	INTEGER	read-write	If enabled, the low limit threshold will be checked when the input is scanned.
STR aislcainMaxInputmA	1.3.6.1.4.1.539.28.1.1.14	DisplayString	read-write	The current in mA corresponding to the maximum input in user-defined units.
STR aislcainMaxInputuu	1.3.6.1.4.1.539.28.1.1.15	DisplayString	read-write	The maximum value in user-defined units corresponding to the maximum input in mA.
STR aislcainMinInputmA	1.3.6.1.4.1.539.28.1.1.12	DisplayString	read-write	The current in mA corresponding to the minimum input in user-defined units.
STR aislcainMinInputuu	1.3.6.1.4.1.539.28.1.1.13	DisplayString	read-write	The minimum value in user-defined units corresponding to the minimum input in mA.
STR aislcainNormalStateText	1.3.6.1.4.1.539.28.1.1.10	DisplayString	read-write	Textual description of the point's normal state. Maximum length is 80 characters.
INT aislcainNormalStateTrap	1.3.6.1.4.1.539.28.1.1.5	INTEGER	read-write	If enabled, transitions from an alarm state to the normal state will generate an SNMP trap or TL1 message.
NUM aislcainPointNumber	1.3.6.1.4.1.539.28.1.1.1	PositiveInteger	read-only	Input point number to which this table row applies.
INT aislcainScanningEnabled	1.3.6.1.4.1.539.28.1.1.2	INTEGER	read-write	Enable or disable scanning of the input.
STR aislcaintl1AccessID	1.3.6.1.4.1.539.28.1.1.29	DisplayString	read-write	Unique TL1 access identifier for this point. Maximum length is 22 characters.
INT aislcaintl1AccessIDType	1.3.6.1.4.1.539.28.1.1.31	INTEGER	read-write	Identifies the point as either an equipment(1) alarm condition or an environmental(2) alarm.
STR aislcaintl1HighAlarmConditionDesc	1.3.6.1.4.1.539.28.1.1.39	DisplayString	read-write	Textual description of the alarm condition, used only when aislcaintl1AccessIDType is equipment(1). Maximum length is 64 characters.
STR aislcaintl1HighAlarmConditionType	1.3.6.1.4.1.539.28.1.1.38	DisplayString	read-write	String indicating the type of alarm condition, used only when aislcaintl1AccessIDType is equipment(1). Maximum length is 20 characters.
STR aislcaintl1HighAlarmMessage	1.3.6.1.4.1.539.28.1.1.33	DisplayString	read-write	Textual description of the alarm, used only when aislcaintl1AccessIDType is environmental(2). Maximum length is 40 characters.
INT aislcaintl1HighAlarmNotificationCode	1.3.6.1.4.1.539.28.1.1.36	INTEGER	read-write	Severity of the point's alarm state.
INT aislcaintl1HighAlarmServiceAffecting	1.3.6.1.4.1.539.28.1.1.37	INTEGER	read-write	Indicates whether or not the alarm affects the functioning of the equipment. This is only meaningful when aislcaintl1AccessIDType is equipment(1).
STR aislcaintl1HighAlarmType	1.3.6.1.4.1.539.28.1.1.32	DisplayString	read-write	String indicating the type of alarm, used only when aislcaintl1AccessIDType is environmental(2). Maximum length is 10 characters.
STR aislcaintl1LowAlarmConditionDesc	1.3.6.1.4.1.539.28.1.1.43	DisplayString	read-write	Textual description of the alarm condition, used only when aislcaintl1AccessIDType is equipment(1). Maximum length is 64 characters.
STR aislcaintl1LowAlarmConditionType	1.3.6.1.4.1.539.28.1.1.42	DisplayString	read-write	String indicating the type of alarm condition, used only when aislcaintl1AccessIDType is equipment(1). Maximum length is 20 characters.
STR aislcaintl1LowAlarmMessage	1.3.6.1.4.1.539.28.1.1.35	DisplayString	read-write	Textual description of the alarm, used only when aislcaintl1AccessIDType is environmental(2). Maximum length is 40 characters.
INT aislcaintl1LowAlarmNotificationCode	1.3.6.1.4.1.539.28.1.1.40	INTEGER	read-write	Severity of the point's alarm state.
INT aislcaintl1LowAlarmServiceAffecting	1.3.6.1.4.1.539.28.1.1.41	INTEGER	read-write	Indicates whether or not the alarm affects the functioning of the equipment. This is only meaningful when aislcaintl1AccessIDType is equipment(1).
STR aislcaintl1LowAlarmType	1.3.6.1.4.1.539.28.1.1.34	DisplayString	read-write	String indicating the type of alarm, used only when aislcaintl1AccessIDType is environmental(2). Maximum length is 10 characters.
T/F aislcaintl1Provisioned	1.3.6.1.4.1.539.28.1.1.30	TruthValue	read-write	Enable TL1 management of this point.
INT aislcainTrapEnable	1.3.6.1.4.1.539.28.1.1.4	INTEGER	read-write	Enable or disable alarm traps.
STR aislcainUserUnits	1.3.6.1.4.1.539.28.1.1.11	DisplayString	read-write	The user-defined units for this input (e.g. degC, degF, etc.).
aiSLCAnalog	1.3.6.1.4.1.539.28			MIB module for SLCs with analog input points.
aiSLCAnalogInputEntry	1.3.6.1.4.1.539.28.1.1		not-accessible	Entry of aiSLCAnalogInputTable.
aiSLCAnalogInputTable	1.3.6.1.4.1.539.28.1		not-accessible	Table of analog inputs points indexed by point number. Includes description, configuration and status information.

RFC description

Applied Innovation SLC analog input monitoring with alarm thresholds, scanning, and TL1 integration.

Start monitoring Applied Innovation Smart Line Card (SLC) network access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download AISLCANALOG-MIB

What Is AISLCANALOG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description