BLADETYPE2-NETWORK-MIB

All MIBs › BLADETYPE2-NETWORK-MIB

Organization: Hewlett Packard Company

Last Updated: 2003-12-05

Category: Network Interfaces, Vendor: HP/HPE

Description: Manages network interface configuration and statistics for HP BladeSystem Type 2 server blade modules.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BLADETYPE2-NETWORK-MIB?

BLADETYPE2-NETWORK-MIB is HP's proprietary MIB for Layer 3 (IP) configuration, statistics, and status on HP BladeSystem Type 2 embedded network switch modules. It exposes IP interface configuration — address, subnet mask, broadcast address, VLAN mapping, BOOTP relay setting, and interface state — split between currently active and newly staged configuration tables. It is used to monitor the software/network-layer operational status of blade switch interfaces, particularly whether an IP interface is up (ipCurCfgIntfState) and whether a staged configuration change has taken effect, rather than physical hardware health. It follows conventions similar to standard IP-MIB and IF-MIB addressing/indexing schemes. It is deployed within the L3-capable embedded switch modules of HP BladeSystem enclosures, routing traffic between blade server VLANs in enterprise data centers. Engineers can download the BLADETYPE2-NETWORK-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BLADETYPE2-NETWORK-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP BladeSystem Type 2 embedded network switch module

Monitoring Examples

An administrator would poll ipCurCfgIntfTable/ipCurCfgIntfEntry, checking ipCurCfgIntfState per ipCurCfgIntfIndex to detect an IP interface that has unexpectedly gone down, and ipCurCfgIntfAddr/ipCurCfgIntfMask/ipCurCfgIntfVlan to confirm correct addressing and VLAN binding. Comparing entries in ipNewCfgIntfTable against the active ipCurCfgIntfTable after a configuration push reveals whether a pending change has actually been committed to the running configuration.

What Can Be Monitored

IP interface address and subnet mask
interface VLAN assignment
interface operational state (up/down)
BOOTP relay configuration
pending vs. active configuration state

Imported Objects

From HP-SWITCH-PL-MIB

hpSwitchBladeType2-Mgmt

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
PhysAddress

How to Use in IPNetwork Monitor

Example using ripStatInPkts OID:

Select an HP BladeSystem Type 2 embedded network switch module as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ripStatInPkts into the Find box to locate it in the OID tree, then select it and click OK. The total number of good RIP packets recieved. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
layer3	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3			The MIB module for the Layer 3 configuration, statistics and information .
layer3Configs	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1
ipInterfaceCfg	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1
I32 ipInterfaceTableMax	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.1	Integer32	read-only	The maximum number of rows in the IP interface table.
ipCurCfgIntfTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.2		not-accessible	The table of IP interface configuration.
ipCurCfgIntfEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.2.1		not-accessible	A row in the Ip interface table
I32 ipCurCfgIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.2.1.1	Integer32	read-only	The interface number for which the IP information is related.
IP ipCurCfgIntfAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.2.1.2	IpAddress	read-only	The IP address of the interface.
IP ipCurCfgIntfMask	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.2.1.3	IpAddress	read-only	The subnet mask of the interface.
IP ipCurCfgIntfBroadcast	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.2.1.4	IpAddress	read-only	The broadcast address of the interface.
INT ipCurCfgIntfVlan	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.2.1.5	INTEGER	read-only	The VLAN associated with the interface.
INT ipCurCfgIntfState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.2.1.6	INTEGER	read-only	The state of the interface.
INT ipCurCfgIntfBootpRelay	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.2.1.7	INTEGER	read-only	Enable/disable BOOTP relay.
ipNewCfgIntfTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3		not-accessible	The table of interface configuration in the New Configuration Block.
ipNewCfgIntfEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3.1		not-accessible	A row in the Ip interface table
I32 ipNewCfgIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3.1.1	Integer32	read-only	The interface number for which the IP information is related.
IP ipNewCfgIntfAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3.1.2	IpAddress	read-create	The IP address of the interface.
IP ipNewCfgIntfMask	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3.1.3	IpAddress	read-create	The subnet mask of the interface.
IP ipNewCfgIntfBroadcast	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3.1.4	IpAddress	read-create	The broadcast address of the interface.
INT ipNewCfgIntfVlan	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3.1.5	INTEGER	read-create	The VLAN associated with the interface.
INT ipNewCfgIntfState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3.1.6	INTEGER	read-create	The state of the interface.
INT ipNewCfgIntfDelete	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3.1.7	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
INT ipNewCfgIntfBootpRelay	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3.1.8	INTEGER	read-create	Enable/disable BOOTP relay.
ipGatewayCfg	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2
I32 ipGatewayTableMax	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.3	Integer32	read-only	The maximum number of rows in the IP gateway table.
ipCurCfgGwTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.4		not-accessible	The table of gateways in the Current configuration Block.
ipCurCfgGwEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.4.1		not-accessible	A row in the Ip gateway table
I32 ipCurCfgGwIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.4.1.1	Integer32	read-only	The gateway number for which the information is related.
IP ipCurCfgGwAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.4.1.2	IpAddress	read-only	The IP address of the default gateway.
INT ipCurCfgGwInterval	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.4.1.3	INTEGER	read-only	The interval between ping attempts.
INT ipCurCfgGwRetry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.4.1.4	INTEGER	read-only	The number of failed attempts to declare the default gateway DOWN.
INT ipCurCfgGwState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.4.1.5	INTEGER	read-only	The state of the default gateway.
INT ipCurCfgGwArp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.4.1.6	INTEGER	read-only	The state of ARP only health checks.
ipNewCfgGwTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.5		not-accessible	The table of gateway configuration in the new configuration block.
ipNewCfgGwEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.5.1		not-accessible	A row in the Ip default gateway table
I32 ipNewCfgGwIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.5.1.1	Integer32	read-only	The gateway number for which the information is related.
IP ipNewCfgGwAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.5.1.2	IpAddress	read-create	The IP address of the default gateway.
INT ipNewCfgGwInterval	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.5.1.3	INTEGER	read-create	The interval in seconds between ping attempts.
INT ipNewCfgGwRetry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.5.1.4	INTEGER	read-create	The number of failed attempts to declare the default gateway DOWN.
INT ipNewCfgGwState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.5.1.5	INTEGER	read-create	The state of the default gateway.
INT ipNewCfgGwDelete	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.5.1.6	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
INT ipNewCfgGwArp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.5.1.7	INTEGER	read-create	The state of the ARP only health checks.
ipStaticRouteCfg	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3
I32 ipStaticRouteTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.1	Integer32	read-only	The maximum number of rows in the Static Route table.
ipCurCfgStaticRouteTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.2		not-accessible	The table of static routes in the current configuration block.
ipCurCfgStaticRouteEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.2.1		not-accessible	A row in the static IP route table
I32 ipCurCfgStaticRouteIndx	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.2.1.1	Integer32	read-only	The index of the static routing table.
IP ipCurCfgStaticRouteDestIp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.2.1.2	IpAddress	read-only	The destination IP address of this route.
IP ipCurCfgStaticRouteMask	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.2.1.3	IpAddress	read-only	The destination IP address of this route.
IP ipCurCfgStaticRouteGateway	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.2.1.4	IpAddress	read-only	The destination IP address of this route.
I32 ipCurCfgStaticRouteInterface	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.2.1.5	Integer32	read-only	The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
ipNewCfgStaticRouteTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.3		not-accessible	The table of static routes in the new configuration block.
ipNewCfgStaticRouteEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.3.1		not-accessible	A row in the static IP route table
I32 ipNewCfgStaticRouteIndx	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.3.1.1	Integer32	read-only	The index of the static routing table.
IP ipNewCfgStaticRouteDestIp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.3.1.2	IpAddress	read-create	The destination IP address of this route.
IP ipNewCfgStaticRouteMask	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.3.1.3	IpAddress	read-create	The subnet mask of this route.
IP ipNewCfgStaticRouteGateway	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.3.1.4	IpAddress	read-create	The IP address of the gateway for this route.
INT ipNewCfgStaticRouteAction	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.3.1.5	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
I32 ipNewCfgStaticRouteInterface	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.3.1.6	Integer32	read-create	The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
ipForwardCfg	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.4
ipFwdGeneralCfg	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.4.1
INT ipFwdCurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.4.1.1	INTEGER	read-only	IP forwarding global state.
INT ipFwdNewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.4.1.2	INTEGER	read-write	IP forwarding global state.
INT ipFwdCurCfgDirectedBcast	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.4.1.3	INTEGER	read-only	Enable or disable forwarding directed broadcasts.
INT ipFwdNewCfgDirectedBcast	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.4.1.4	INTEGER	read-write	Enable or disable forwarding directed broadcasts.
ripCfg	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5
INT ripCurCfgSupply	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.1	INTEGER	read-only	Enable or disable supplying route updates.
INT ripNewCfgSupply	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.2	INTEGER	read-write	Enable or disable supplying route updates.
INT ripCurCfgListen	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.3	INTEGER	read-only	Enable or disable listening to route updates.
INT ripNewCfgListen	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.4	INTEGER	read-write	Enable or disable listening to route updates.
INT ripCurCfgDefListen	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.5	INTEGER	read-only	Enable or disable listening to default routes.
INT ripNewCfgDefListen	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.6	INTEGER	read-write	Enable or disable listening to default routes.
INT ripCurCfgStaticSupply	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.7	INTEGER	read-only	Enable or disable supplying static route updates.
INT ripNewCfgStaticSupply	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.8	INTEGER	read-write	Enable or disable supplying static route updates.
INT ripCurCfgUpdatePeriod	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.9	INTEGER	read-only	Update Period in seconds.
INT ripNewCfgUpdatePeriod	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.10	INTEGER	read-write	Update period in seconds.
INT ripCurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.11	INTEGER	read-only	RIP global state.
INT ripNewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.12	INTEGER	read-write	Globally turn RIP on or off.
INT ripCurCfgPoisonReverse	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.13	INTEGER	read-only	RIP poison reverse.
INT ripNewCfgPoisonReverse	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.14	INTEGER	read-write	RIP poison reverse.
INT ripCurCfgSplitHorizon	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.15	INTEGER	read-only	RIP split horizon.
INT ripNewCfgSplitHorizon	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.16	INTEGER	read-write	RIP split horizon.
vrrpCfg	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6
vrrpGeneral	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1
INT vrrpCurCfgGenState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.1	INTEGER	read-only	Enable or disable VRRP operation globally.
INT vrrpNewCfgGenState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.2	INTEGER	read-write	Enable or disable VRRP operation globally.
INT vrrpCurCfgGenTckVirtRtrInc	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.3	INTEGER	read-only	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers.
INT vrrpNewCfgGenTckVirtRtrInc	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.4	INTEGER	read-write	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers.
INT vrrpCurCfgGenTckIpIntfInc	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.5	INTEGER	read-only	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces.
INT vrrpNewCfgGenTckIpIntfInc	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.6	INTEGER	read-write	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces.
INT vrrpCurCfgGenTckVlanPortInc	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.7	INTEGER	read-only	The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router.
INT vrrpNewCfgGenTckVlanPortInc	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.8	INTEGER	read-write	The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router.
INT vrrpCurCfgGenTckL4PortInc	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.9	INTEGER	read-only	The increment of VRRP virtual router priority. The priority is adjusted by tracking the Layer 4 port states. This is valid when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgGenTckL4PortInc	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.10	INTEGER	read-write	The increment of VRRP virtual router priority. The priority is adjusted by tracking the Layer 4 port states. This is valid when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgGenTckRServerInc	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.11	INTEGER	read-only	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of real servers under the virtual server which is configured as a VRRP virtual router.
INT vrrpNewCfgGenTckRServerInc	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.12	INTEGER	read-write	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of real servers under the virtual server which is configured as a VRRP virtual router.
INT vrrpCurCfgGenTckHsrpInc	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.13	INTEGER	read-only	The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements.
INT vrrpNewCfgGenTckHsrpInc	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.14	INTEGER	read-write	The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements.
INT vrrpCurCfgGenHotstandby	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.15	INTEGER	read-only	Enable or disable hotstandby processing.
INT vrrpNewCfgGenHotstandby	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.16	INTEGER	read-write	Enable or disable hotstandby processing.
INT vrrpCurCfgGenTckHsrvInc	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.17	INTEGER	read-only	The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements by VLAN.
INT vrrpNewCfgGenTckHsrvInc	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.18	INTEGER	read-write	The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements by VLAN.
I32 vrrpVirtRtrTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.2	Integer32	read-only	The maximum number of entries in VRRP virtual router table.
vrrpCurCfgVirtRtrTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3		not-accessible	The table of VRRP virtual routers configuration in current_config.
vrrpCurCfgVirtRtrTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1		not-accessible	Information about a VRRP virtual router.
I32 vrrpCurCfgVirtRtrIndx	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.1	Integer32	read-only	The VRRP virtual router table index.
INT vrrpCurCfgVirtRtrID	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.2	INTEGER	read-only	The VRRP virtual router identifier.
IP vrrpCurCfgVirtRtrAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.3	IpAddress	read-only	The VRRP virtual router IP address.
I32 vrrpCurCfgVirtRtrIfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.4	Integer32	read-only	The IfIndex that the VRRP virtual router is representing.
INT vrrpCurCfgVirtRtrInterval	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.5	INTEGER	read-only	The time interval between VRRP advertisements in seconds.
INT vrrpCurCfgVirtRtrPriority	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.6	INTEGER	read-only	The priority value to be used by the specified VRRP virtual routers.
INT vrrpCurCfgVirtRtrPreempt	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.7	INTEGER	read-only	This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
INT vrrpCurCfgVirtRtrState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.8	INTEGER	read-only	Enable or disable the VRRP virtual router.
INT vrrpCurCfgVirtRtrSharing	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.9	INTEGER	read-only	Enable or disable load sharing of non-master virtual router.
INT vrrpCurCfgVirtRtrTckVirtRtr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.10	INTEGER	read-only	Enable or disable tracking other virtual routers for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVirtRtrInc.
INT vrrpCurCfgVirtRtrTckIpIntf	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.11	INTEGER	read-only	Enable or disable tracking other router interfaces for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
INT vrrpCurCfgVirtRtrTckVlanPort	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.12	INTEGER	read-only	Enable or disable tracking port state of VLAN ports for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
INT vrrpCurCfgVirtRtrTckL4Port	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.13	INTEGER	read-only	Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgVirtRtrTckRServer	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.14	INTEGER	read-only	Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgVirtRtrTckHsrp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.15	INTEGER	read-only	Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgVirtRtrTckHsrv	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.16	INTEGER	read-only	Enable or disable tracking HSRP advertisements by VLAN for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router.
vrrpNewCfgVirtRtrTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4		not-accessible	The table of VRRP virtual routers configuration in current_config.
vrrpNewCfgVirtRtrTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1		not-accessible	Information about a VRRP virtual router.
I32 vrrpNewCfgVirtRtrIndx	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.1	Integer32	read-only	The VRRP virtual router table index.
INT vrrpNewCfgVirtRtrID	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.2	INTEGER	read-write	The VRRP virtual router identifier.
IP vrrpNewCfgVirtRtrAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.3	IpAddress	read-create	The VRRP virtual router IP address.
I32 vrrpNewCfgVirtRtrIfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.4	Integer32	read-create	The IfIndex that the VRRP virtual router is representing.
INT vrrpNewCfgVirtRtrInterval	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.5	INTEGER	read-create	The time interval between VRRP advertisements in seconds.
INT vrrpNewCfgVirtRtrPriority	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.6	INTEGER	read-create	The priority value to be used by the specified VRRP virtual router.
INT vrrpNewCfgVirtRtrPreempt	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.7	INTEGER	read-create	This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
INT vrrpNewCfgVirtRtrState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.8	INTEGER	read-create	Enable or disable the VRRP virtual router.
INT vrrpNewCfgVirtRtrDelete	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.9	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
INT vrrpNewCfgVirtRtrSharing	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.10	INTEGER	read-create	Enable or disable load sharing of non-master virtual router.
INT vrrpNewCfgVirtRtrTckVirtRtr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.11	INTEGER	read-create	Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc.
INT vrrpNewCfgVirtRtrTckIpIntf	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.12	INTEGER	read-create	Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
INT vrrpNewCfgVirtRtrTckVlanPort	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.13	INTEGER	read-create	Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
INT vrrpNewCfgVirtRtrTckL4Port	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.14	INTEGER	read-create	Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgVirtRtrTckRServer	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.15	INTEGER	read-create	Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgVirtRtrTckHsrp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.16	INTEGER	read-create	Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgVirtRtrTckHsrv	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.17	INTEGER	read-create	Enable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router.
I32 vrrpIfTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.5	Integer32	read-only	The maximum number of entries in VRRP interface table.
vrrpCurCfgIfTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.6		not-accessible	The table of VRRP interface configuration in current_config.
vrrpCurCfgIfTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.6.1		not-accessible	Information about a VRRP interface.
I32 vrrpCurCfgIfIndx	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.6.1.1	Integer32	read-only	The VRRP interface index. This is eqivalent to IfIndex.
INT vrrpCurCfgIfAuthType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.6.1.2	INTEGER	read-only	Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpCurCfgIfPasswd for authentication.
STR vrrpCurCfgIfPasswd	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.6.1.3	DisplayString	read-only	The password for authentication.
vrrpNewCfgIfTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.7		not-accessible	The table of VRRP interface configuration in current_config.
vrrpNewCfgIfTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.7.1		not-accessible	Information about a VRRP interface.
I32 vrrpNewCfgIfIndx	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.7.1.1	Integer32	read-only	The VRRP interface index. This is eqivalent to IfIndex.
INT vrrpNewCfgIfAuthType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.7.1.2	INTEGER	read-create	Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpNewCfgIfPasswd for authentication.
STR vrrpNewCfgIfPasswd	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.7.1.3	DisplayString	read-create	The password for authentication.
INT vrrpNewCfgIfDelete	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.7.1.4	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
I32 vrrpVirtRtrGrpTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.8	Integer32	read-only	The maximum number of entries in VRRP Group table.
vrrpCurCfgVirtRtrGrpTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9		not-accessible	The table of VRRP virtual router group in current_config.
vrrpCurCfgVirtRtrGrpTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1		not-accessible	Information about a VRRP failover virtual router.
I32 vrrpCurCfgVirtRtrGrpIndx	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.1	Integer32	read-only	The VRRP virtual router table index.
INT vrrpCurCfgVirtRtrGrpID	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.2	INTEGER	read-only	The VRRP virtual router identifier.
I32 vrrpCurCfgVirtRtrGrpIfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.3	Integer32	read-only	The IfIndex that the VRRP virtual router is representing.
INT vrrpCurCfgVirtRtrGrpInterval	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.4	INTEGER	read-only	The time interval between VRRP advertisements in seconds.
INT vrrpCurCfgVirtRtrGrpPriority	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.5	INTEGER	read-only	The priority value to be used by the specified VRRP virtual routers.
INT vrrpCurCfgVirtRtrGrpPreempt	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.6	INTEGER	read-only	This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
INT vrrpCurCfgVirtRtrGrpState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.7	INTEGER	read-only	Enable or disable the VRRP virtual router.
INT vrrpCurCfgVirtRtrGrpSharing	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.8	INTEGER	read-only	Enable or disable load sharing of non-master virtual router.
INT vrrpCurCfgVirtRtrGrpTckVirtRtr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.9	INTEGER	read-only	Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVirtRtrInc.
INT vrrpCurCfgVirtRtrGrpTckIpIntf	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.10	INTEGER	read-only	Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
INT vrrpCurCfgVirtRtrGrpTckVlanPort	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.11	INTEGER	read-only	Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
INT vrrpCurCfgVirtRtrGrpTckL4Port	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.12	INTEGER	read-only	Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgVirtRtrGrpTckRServer	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.13	INTEGER	read-only	Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgVirtRtrGrpTckHsrp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.14	INTEGER	read-only	Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgVirtRtrGrpTckHsrv	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.15	INTEGER	read-only	Enable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router.
vrrpNewCfgVirtRtrGrpTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10		not-accessible	The table of VRRP virtual router group configuration in new_config.
vrrpNewCfgVirtRtrGrpTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1		not-accessible	Information about a VRRP failover virtual router.
I32 vrrpNewCfgVirtRtrGrpIndx	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.1	Integer32	read-only	The VRRP virtual router table index.
INT vrrpNewCfgVirtRtrGrpID	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.2	INTEGER	read-create	The VRRP virtual router identifier.
I32 vrrpNewCfgVirtRtrGrpIfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.3	Integer32	read-create	The IfIndex that the VRRP virtual router is representing.
INT vrrpNewCfgVirtRtrGrpInterval	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.4	INTEGER	read-create	The time interval between VRRP advertisements in seconds.
INT vrrpNewCfgVirtRtrGrpPriority	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.5	INTEGER	read-create	The priority value to be used by the specified VRRP virtual router.
INT vrrpNewCfgVirtRtrGrpPreempt	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.6	INTEGER	read-create	This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
INT vrrpNewCfgVirtRtrGrpState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.7	INTEGER	read-create	Enable or disable the VRRP virtual router.
INT vrrpNewCfgVirtRtrGrpDelete	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.8	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
INT vrrpNewCfgVirtRtrGrpSharing	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.9	INTEGER	read-create	Enable or disable load sharing of non-master virtual router.
INT vrrpNewCfgVirtRtrGrpTckVirtRtr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.10	INTEGER	read-create	Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc.
INT vrrpNewCfgVirtRtrGrpTckIpIntf	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.11	INTEGER	read-create	Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
INT vrrpNewCfgVirtRtrGrpTckVlanPort	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.12	INTEGER	read-create	Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
INT vrrpNewCfgVirtRtrGrpTckL4Port	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.13	INTEGER	read-create	Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgVirtRtrGrpTckRServer	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.14	INTEGER	read-create	Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgVirtRtrGrpTckHsrp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.15	INTEGER	read-create	Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgVirtRtrGrpTckHsrv	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.16	INTEGER	read-create	Enable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router.
arpCfg	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7
INT arpCurCfgReARPPeriod	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.1	INTEGER	read-only	Re-ARP Period in seconds.
INT arpNewCfgReARPPeriod	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.2	INTEGER	read-write	Re-ARP Period in seconds.
INT ipStaticArpTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.3	INTEGER	read-only	The maximum number of rows in the Static ARP table.
ipCurCfgStaticArpTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.4		not-accessible	The table of static ARPs in the current configuration block.
ipCurCfgStaticArpEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.4.1		not-accessible	A row in the static ARP table
I32 ipCurCfgStaticArpIndx	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.4.1.1	Integer32	read-only	The index of the static ARP table.
IP ipCurCfgStaticArpIp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.4.1.2	IpAddress	read-only	The IP address for the ARP entry.
PHY ipCurCfgStaticArpMAC	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.4.1.3	PhysAddress	read-only	The MAC address for the ARP entry.
INT ipCurCfgStaticArpVlan	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.4.1.4	INTEGER	read-only	The VLAN for the ARP entry.
I32 ipCurCfgStaticArpPort	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.4.1.5	Integer32	read-only	The port for the ARP entry.
ipNewCfgStaticArpTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.5		not-accessible	The table of static ARPs in the new configuration block.
ipNewCfgStaticArpEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.5.1		not-accessible	A row in the static ARP table
I32 ipNewCfgStaticArpIndx	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.5.1.1	Integer32	read-only	The index of the static ARP table.
IP ipNewCfgStaticArpIp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.5.1.2	IpAddress	read-create	The IP address for the ARP entry.
PHY ipNewCfgStaticArpMAC	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.5.1.3	PhysAddress	read-create	The MAC address for the ARP entry.
INT ipNewCfgStaticArpVlan	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.5.1.4	INTEGER	read-create	The VLAN for the ARP entry.
I32 ipNewCfgStaticArpPort	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.5.1.5	Integer32	read-create	The port for the ARP entry.
INT ipNewCfgStaticArpAction	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.5.1.6	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ipBootpCfg	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.8
IP ipCurCfgBootpAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.8.1	IpAddress	read-only	The IP address of BOOTP server.
IP ipNewCfgBootpAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.8.2	IpAddress	read-write	The IP address of BOOTP server.
IP ipCurCfgBootpAddr2	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.8.3	IpAddress	read-only	The IP address of second BOOTP server.
IP ipNewCfgBootpAddr2	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.8.4	IpAddress	read-write	The IP address of second BOOTP server.
INT ipCurCfgBootpState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.8.5	INTEGER	read-only	The state of BOOTP relay.
INT ipNewCfgBootpState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.8.6	INTEGER	read-write	The state of BOOTP relay.
INT ipCurCfgDhcpOpt82State	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.8.7	INTEGER	read-only	The state of DHCP relay agent information.
INT ipNewCfgDhcpOpt82State	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.8.8	INTEGER	read-write	The state of DHCP relay agent information.
dnsCfg	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.9
IP dnsCurCfgPrimaryIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.9.1	IpAddress	read-only	The DNS primary IP address in the current_configuration block.
IP dnsNewCfgPrimaryIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.9.2	IpAddress	read-write	The DNS primary IP address in the new_configuration block.
IP dnsCurCfgSecondaryIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.9.3	IpAddress	read-only	The DNS primary IP address in the current_configuration block.
IP dnsNewCfgSecondaryIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.9.4	IpAddress	read-write	The DNS primary IP address in the new_configuration block.
STR dnsCurCfgDomainName	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.9.5	DisplayString	read-only	The DNS doamin name in the current_configuration block.
STR dnsNewCfgDomainName	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.9.6	DisplayString	read-write	The DNS doamin name in the new_configuration block.
ipNwfCfg	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10
I32 ipNwfTableMax	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.1	Integer32	read-only	The maximum number of rows in the IP network filter table.
ipCurCfgNwfTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.2		not-accessible	The table of IP network filter configuration in the current_config.
ipCurCfgNwfEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.2.1		not-accessible	Information about an IP network filter.
I32 ipCurCfgNwfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.2.1.1	Integer32	read-only	The netowrk filter number for which the NWF is related.
IP ipCurCfgNwfAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.2.1.2	IpAddress	read-only	The IP address of the network filter.
IP ipCurCfgNwfMask	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.2.1.3	IpAddress	read-only	The subnet mask of the network filter.
INT ipCurCfgNwfState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.2.1.4	INTEGER	read-only	Enable or disable the network filter.
ipNewCfgNwfTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.3		not-accessible	The table of IP network filter configuration in the current_config.
ipNewCfgNwfEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.3.1		not-accessible	Information about an IP network filter.
I32 ipNewCfgNwfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.3.1.1	Integer32	read-only	The netowrk filter number for which the NWF is related.
IP ipNewCfgNwfAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.3.1.2	IpAddress	read-create	The IP address of the network filter.
IP ipNewCfgNwfMask	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.3.1.3	IpAddress	read-create	The subnet mask of the network filter.
INT ipNewCfgNwfState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.3.1.4	INTEGER	read-create	Enable or disable the network filter.
INT ipNewCfgNwfDelete	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.3.1.5	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ipRmapCfg	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11
I32 ipRmapTableMax	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.1	Integer32	read-only	The maximum number of rows in the IP route map table.
ipCurCfgRmapTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2		not-accessible	The table of IP route map configuration in the current_config.
ipCurCfgRmapEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2.1		not-accessible	Information about an IP route map.
I32 ipCurCfgRmapIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2.1.1	Integer32	read-only	The route map number for which the RMAP is related.
U32 ipCurCfgRmapLp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2.1.2	Unsigned32	read-only	The local-preference of the route map. 4294967295 means none
U32 ipCurCfgRmapMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2.1.3	Unsigned32	read-only	The metric of the route map. 4294967295 means none
INT ipCurCfgRmapPrec	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2.1.4	INTEGER	read-only	The precedence of the route map.
INT ipCurCfgRmapWeight	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2.1.5	INTEGER	read-only	The weight of the route map. 65535 means none
INT ipCurCfgRmapState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2.1.6	INTEGER	read-only	Enable or disable the route map.
STR ipCurCfgRmapAp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2.1.7	DisplayString	read-only	The as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is: [][ ]
INT ipCurCfgRmapMetricType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2.1.8	INTEGER	read-only	The OSPF metric-type of the matched route.
ipNewCfgRmapTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3		not-accessible	The table of IP route map configuration in the current_config.
ipNewCfgRmapEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1		not-accessible	Information about an IP route map.
I32 ipNewCfgRmapIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1.1	Integer32	read-only	The route map number for which the RMAP is related.
U32 ipNewCfgRmapLp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1.2	Unsigned32	read-create	The local-preference of the route map. 4294967295 means none
U32 ipNewCfgRmapMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1.3	Unsigned32	read-create	The metric of the route map. 4294967295 means none
INT ipNewCfgRmapPrec	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1.4	INTEGER	read-create	The precedence of the route map.
INT ipNewCfgRmapWeight	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1.5	INTEGER	read-create	The weight of the route map. 65535 means none
INT ipNewCfgRmapState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1.6	INTEGER	read-create	Enable or disable the route map.
STR ipNewCfgRmapAp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1.7	DisplayString	read-create	The as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is: [][ ]
INT ipNewCfgRmapMetricType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1.8	INTEGER	read-create	The OSPF metric-type of the matched route.
INT ipNewCfgRmapDelete	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1.9	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
I32 ipAlistTableMax	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.4	Integer32	read-only	The maximum number of rows in the IP route map table.
ipCurCfgAlistTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.5		not-accessible	The table of IP route map access list configuration in the current_config.
ipCurCfgAlistEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.5.1		not-accessible	Information about an IP route map.
I32 ipCurCfgAlistRmapIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.5.1.1	Integer32	read-only	The route map number for which the RMAP is related.
I32 ipCurCfgAlistIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.5.1.2	Integer32	read-only	The access list number for which the access list is related.
INT ipCurCfgAlistNwf	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.5.1.3	INTEGER	read-only	The network filter number of the route map access list. 0 means none
U32 ipCurCfgAlistMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.5.1.4	Unsigned32	read-only	The metric of the route map access list. 4294967295 means none
INT ipCurCfgAlistAction	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.5.1.5	INTEGER	read-only	Action of the route map access list.
INT ipCurCfgAlistState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.5.1.6	INTEGER	read-only	Enable or disable the route map access list.
ipNewCfgAlistTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.6		not-accessible	The table of IP route map access list configuration in the current_config.
ipNewCfgAlistEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.6.1		not-accessible	Information about an IP route map.
I32 ipNewCfgAlistRmapIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.6.1.1	Integer32	read-only	The route map number for which the RMAP is related.
I32 ipNewCfgAlistIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.6.1.2	Integer32	read-only	The access list number for which the access list is related.
INT ipNewCfgAlistNwf	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.6.1.3	INTEGER	read-create	The network filter number of the route map access list. 0 means none
U32 ipNewCfgAlistMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.6.1.4	Unsigned32	read-create	The metric of the route map access list. 4294967295 means none
INT ipNewCfgAlistAction	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.6.1.5	INTEGER	read-create	Action of the route map access list.
INT ipNewCfgAlistState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.6.1.6	INTEGER	read-create	Enable or disable the route map access list.
INT ipNewCfgAlistDelete	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.6.1.7	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
I32 ipAspathTableMax	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.7	Integer32	read-only	The maximum number of rows in the IP route map table.
ipCurCfgAspathTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.8		not-accessible	The table of IP route map access path configuration.
ipCurCfgAspathEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.8.1		not-accessible	Information about an IP route map.
I32 ipCurCfgAspathRmapIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.8.1.1	Integer32	read-only	The route map number for which the RMAP is related.
I32 ipCurCfgAspathIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.8.1.2	Integer32	read-only	The access path number for which the access list is related.
INT ipCurCfgAspathAS	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.8.1.3	INTEGER	read-only	The AS number of the route map access path. 0 means none
INT ipCurCfgAspathAction	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.8.1.4	INTEGER	read-only	Action of the route map access path.
INT ipCurCfgAspathState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.8.1.5	INTEGER	read-only	Enable or disable the route map access path.
ipNewCfgAspathTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.9		not-accessible	The table of IP route map access path configuration
ipNewCfgAspathEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.9.1		not-accessible	Information about an IP route map.
I32 ipNewCfgAspathRmapIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.9.1.1	Integer32	read-only	The route map number for which the RMAP is related.
I32 ipNewCfgAspathIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.9.1.2	Integer32	read-only	The access path number for which the access list is related.
INT ipNewCfgAspathAS	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.9.1.3	INTEGER	read-create	The AS number of the route map access path. 0 means none
INT ipNewCfgAspathAction	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.9.1.4	INTEGER	read-create	Action of the route map access path.
INT ipNewCfgAspathState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.9.1.5	INTEGER	read-create	Enable or disable the route map access path.
INT ipNewCfgAspathDelete	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.9.1.6	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ospfCfg	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13
ospfGeneral	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1
INT ospfCurCfgDefaultRouteMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.1	INTEGER	read-only	Specify the metric to be assigned.
INT ospfNewCfgDefaultRouteMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.2	INTEGER	read-write	Specify the metric to be assigned.
INT ospfCurCfgDefaultRouteMetricType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.3	INTEGER	read-only	Specify the AS External metric type to be assigned.
INT ospfNewCfgDefaultRouteMetricType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.4	INTEGER	read-write	Specify the AS External metric type to be assigned.
I32 ospfIntfTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.5	Integer32	read-only	The maximum number of rows in the OSPF Interface table.
I32 ospfAreaTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.6	Integer32	read-only	The maximum number of rows in the OSPF Area table.
I32 ospfRangeTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.7	Integer32	read-only	The maximum number of rows in the OSPF Range table.
I32 ospfVirtIntfTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.8	Integer32	read-only	The maximum number of rows in the OSPF Virtual Interface table.
I32 ospfHostTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.9	Integer32	read-only	The maximum number of rows in the OSPF Host table.
INT ospfCurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.10	INTEGER	read-only	OSPF global state.
INT ospfNewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.11	INTEGER	read-write	Globally turn OSPF on or off.
ospfCurCfgAreaTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.2		not-accessible	The table of OSPF Area configuration in the current_config.
ospfCurCfgAreaEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.2.1		not-accessible	Information about a OSPF area.
I32 ospfCurCfgAreaIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.2.1.1	Integer32	read-only	The OSPF area number for which the OSPF area table is related.
IP ospfCurCfgAreaId	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.2.1.2	IpAddress	read-only	The IP Address of the OSPF area.
INT ospfCurCfgAreaSpfInterval	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.2.1.3	INTEGER	read-only	The SPF interval for the OSPF area.
INT ospfCurCfgAreaAuthType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.2.1.4	INTEGER	read-only	Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
INT ospfCurCfgAreaType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.2.1.5	INTEGER	read-only	Type of Area. transit(0) stub(1) nssa(2)
INT ospfCurCfgAreaMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.2.1.6	INTEGER	read-only	Metric (1-65535)
INT ospfCurCfgAreaStatus	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.2.1.7	INTEGER	read-only	Status disabled(0) enabled(1)
ospfNewCfgAreaTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3		not-accessible	The table of OSPF Area configuration in the new_config.
ospfNewCfgAreaEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3.1		not-accessible	Information about a OSPF area.
I32 ospfNewCfgAreaIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3.1.1	Integer32	read-only	The OSPF area number for which the OSPF area table is related.
IP ospfNewCfgAreaId	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3.1.2	IpAddress	read-create	The IP Address of the OSPF area.
INT ospfNewCfgAreaSpfInterval	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3.1.3	INTEGER	read-write	The SPF interval for the OSPF area.
INT ospfNewCfgAreaAuthType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3.1.4	INTEGER	read-write	Type of authentication being used. none(1) - no authentication password(2) - use password. md5(3) - use MD5 authentication.
INT ospfNewCfgAreaType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3.1.5	INTEGER	read-write	Type of Area. transit(0) stub(1) nssa(2)
INT ospfNewCfgAreaMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3.1.6	INTEGER	read-write	Metric (1-65535)
INT ospfNewCfgAreaStatus	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3.1.7	INTEGER	read-write	Status disabled(0) enabled(1)
INT ospfNewCfgAreaDelete	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3.1.8	INTEGER	read-write	Delete the area no(0), yes(1)
ospfRouteRedistribution	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4
ospfRedistributeStatic	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.1
INT ospfCurCfgStaticMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.1.1	INTEGER	read-only	The metric to be assigned to static routes. A value of 0 indicates none.
INT ospfNewCfgStaticMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.1.2	INTEGER	read-write	The metric to be assigned to static routes. A value of 0 indicates none.
INT ospfCurCfgStaticMetricType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.1.3	INTEGER	read-only	The AS External metric type for static routes.
INT ospfNewCfgStaticMetricType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.1.4	INTEGER	read-write	The AS External metric type for static routes.
OCT ospfCurCfgStaticOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.1.5	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
OCT ospfNewCfgStaticOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.1.6	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ospfNewCfgStaticAddOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.1.7	Integer32	read-write	The route map to be add into out-rmap list. When read, 0 is returned.
I32 ospfNewCfgStaticRemoveOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.1.8	Integer32	read-write	The route map to be removed from out-rmap list. When read, 0 is returned.
ospfRedistributeFixed	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.4
INT ospfCurCfgFixedMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.4.1	INTEGER	read-only	The export metric for fixed routes. A value of 0 indicates none
INT ospfNewCfgFixedMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.4.2	INTEGER	read-write	The export metric for fixed routes. A value of 0 indicates none
INT ospfCurCfgFixedMetricType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.4.3	INTEGER	read-only	The AS External metric type for fixed routes.
INT ospfNewCfgFixedMetricType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.4.4	INTEGER	read-write	The AS External metric type for fixed routes.
OCT ospfCurCfgFixedOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.4.5	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
OCT ospfNewCfgFixedOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.4.6	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ospfNewCfgFixedAddOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.4.7	Integer32	read-write	The route map to be add into out-rmap list. When read, 0 is returned.
I32 ospfNewCfgFixedRemoveOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.4.8	Integer32	read-write	The route map to be removed from out-rmap list. When read, 0 is returned.
ospfRedistributeRip	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5
INT ospfCurCfgRipMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.1	INTEGER	read-only	The export metric for RIP routes. A value of 0 indicates none
INT ospfNewCfgRipMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.2	INTEGER	read-write	The export metric for RIP routes. A value of 0 indicates none
INT ospfCurCfgRipMetricType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.3	INTEGER	read-only	The AS External metric type for RIP routes.
INT ospfNewCfgRipMetricType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.4	INTEGER	read-write	The AS External metric type for RIP routes.
OCT ospfCurCfgRipOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.5	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
OCT ospfNewCfgRipOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.6	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ospfNewCfgRipAddOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.7	Integer32	read-write	The route map to be add into out-rmap list. When read, 0 is returned.
I32 ospfNewCfgRipRemoveOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.8	Integer32	read-write	The route map to be removed from out-rmap list. When read, 0 is returned.
ospfCurCfgMdkeyTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.5		not-accessible	The table of OSPF MD5 keys in the current_config.
ospfCurCfgMdkeyEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.5.1		not-accessible	Information about an OSPF MD keys table.
I32 ospfCurCfgMdkeyIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.5.1.1	Integer32	read-only	The OSPF MD5 Key number for which the OSPF MdKey table is related.
STR ospfCurCfgMdkeyKey	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.5.1.2	DisplayString	read-only	The character string representing the MD5 Key.
ospfNewCfgMdkeyTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.6		not-accessible	The table of OSPF MD5 keys in the new_config.
ospfNewCfgMdkeyEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.6.1		not-accessible	Information about an OSPF MD keys table.
I32 ospfNewCfgMdkeyIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.6.1.1	Integer32	read-only	The OSPF MD5 Key number for which the OSPF MdKey table is related.
STR ospfNewCfgMdkeyKey	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.6.1.2	DisplayString	read-create	The character string representing the MD5 Key.
INT ospfNewCfgMdkeyDelete	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.6.1.3	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ospfCurCfgIntfTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7		not-accessible	The table of OSPF Interface configuration in the current_config.
ospfCurCfgIntfEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1		not-accessible	Information about an OSPF Interface.
I32 ospfCurCfgIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.1	Integer32	read-only	The OSPF Interface number for which the OSPF Interface table is related.
IP ospfCurCfgIntfId	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.2	IpAddress	read-only	The IP Address of the OSPF interface.
INT ospfCurCfgIntfArea	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.3	INTEGER	read-only	The index of the area that the interface belongs
INT ospfCurCfgIntfMdkey	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.4	INTEGER	read-only	The MD5 key for the OSPF interface 0 (none) no MD5 authentication.
INT ospfCurCfgIntfCost	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.5	INTEGER	read-only	Interface cost
INT ospfCurCfgIntfPrio	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.6	INTEGER	read-only	Interface router priority
INT ospfCurCfgIntfHello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.7	INTEGER	read-only	Hello interval
INT ospfCurCfgIntfDead	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.8	INTEGER	read-only	Dead interval
INT ospfCurCfgIntfTrans	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.9	INTEGER	read-only	Transit delay
INT ospfCurCfgIntfRetra	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.10	INTEGER	read-only	Retransmit interval
STR ospfCurCfgIntfAuthKey	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.11	DisplayString	read-only	Authentication Key
INT ospfCurCfgIntfStatus	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.12	INTEGER	read-only	Status of the interface disabled(0), enabled(1)
ospfNewCfgIntfTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8		not-accessible	The table of OSPF Interface configuration in the new_config.
ospfNewCfgIntfEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1		not-accessible	Information about an OSPF Interface.
I32 ospfNewCfgIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.1	Integer32	read-only	The OSPF Interface number for which the OSPF Interface table is related.
IP ospfNewCfgIntfId	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.2	IpAddress	read-only	The IP Address of the OSPF interface.
INT ospfNewCfgIntfArea	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.3	INTEGER	read-create	The index of the area that the interface belongs (0..2)
INT ospfNewCfgIntfMdkey	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.4	INTEGER	read-create	The MD5 key for the OSPF interface 0 (none) no MD5 authentication.
INT ospfNewCfgIntfCost	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.5	INTEGER	read-create	Interface cost(1..65535)
INT ospfNewCfgIntfPrio	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.6	INTEGER	read-create	Interface router priority(0..255)
INT ospfNewCfgIntfHello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.7	INTEGER	read-create	Hello interval(1..65535)
INT ospfNewCfgIntfDead	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.8	INTEGER	read-create	Dead interval(1..65535)
INT ospfNewCfgIntfTrans	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.9	INTEGER	read-create	Transit delay(1..3600)
INT ospfNewCfgIntfRetra	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.10	INTEGER	read-create	Retransmit interval(1..3600)
STR ospfNewCfgIntfAuthKey	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.11	DisplayString	read-create	Authentication Key
INT ospfNewCfgIntfStatus	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.12	INTEGER	read-create	Status of the interface disabled(0), enabled(1)
INT ospfNewCfgIntfDelete	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.13	INTEGER	read-write	Delete the interface other(0), delete(1)
ospfCurCfgVirtIntfTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9		not-accessible	The table of OSPF Virtual Interface configuration in the current_config.
ospfCurCfgVirtIntfEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1		not-accessible	Information about an OSPF virtual Interface.
I32 ospfCurCfgVirtIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.1	Integer32	read-only	The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related.
INT ospfCurCfgVirtIntfAreaId	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.2	INTEGER	read-only	The index of the OSPF area to which this virtual interface belongs.
IP ospfCurCfgVirtIntfNbr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.3	IpAddress	read-only	The IP Address of the OSPF neighbor for this virtual interface.
INT ospfCurCfgVirtIntfMdkey	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.4	INTEGER	read-only	The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
INT ospfCurCfgVirtIntfHello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.5	INTEGER	read-only	Hello interval
INT ospfCurCfgVirtIntfDead	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.6	INTEGER	read-only	Dead interval
INT ospfCurCfgVirtIntfTrans	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.7	INTEGER	read-only	Transit delay
INT ospfCurCfgVirtIntfRetra	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.8	INTEGER	read-only	Retransmit interval
STR ospfCurCfgVirtIntfAuthKey	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.9	DisplayString	read-only	Authentication Key
INT ospfCurCfgVirtIntfStatus	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.10	INTEGER	read-only	Status disabled(0), enabled(1)
ospfNewCfgVirtIntfTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10		not-accessible	The table of OSPF Virtual Interface configuration in the new_config.
ospfNewCfgVirtIntfEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1		not-accessible	Information about an OSPF virtual Interface.
I32 ospfNewCfgVirtIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.1	Integer32	read-only	The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related.
INT ospfNewCfgVirtIntfAreaId	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.2	INTEGER	read-create	The index of the OSPF area to which this virtual interface belongs.
IP ospfNewCfgVirtIntfNbr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.3	IpAddress	read-create	The IP Address of the OSPF neighbor for this virtual interface.
INT ospfNewCfgVirtIntfMdkey	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.4	INTEGER	read-create	The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
INT ospfNewCfgVirtIntfHello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.5	INTEGER	read-create	Hello interval(1..65535)
INT ospfNewCfgVirtIntfDead	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.6	INTEGER	read-create	Dead interval(1..65535)
INT ospfNewCfgVirtIntfTrans	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.7	INTEGER	read-create	Transit dela(1..3600)y
INT ospfNewCfgVirtIntfRetra	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.8	INTEGER	read-create	Retransmit interval(1..3600)
STR ospfNewCfgVirtIntfAuthKey	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.9	DisplayString	read-create	Authentication Key SIZE(0..8)
INT ospfNewCfgVirtIntfStatus	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.10	INTEGER	read-create	Status disabled(0), enabled(1)
INT ospfNewCfgVirtIntfDelete	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.11	INTEGER	read-write	Delete other(0), delete(1)
I32 ospfMdkeyTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.11	Integer32	read-only	The maximum number of rows in the OSPF Mdkey table.
ospfCurCfgHostTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.12		not-accessible	The table of OSPF Host configuration.
ospfCurCfgHostEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.12.1		not-accessible	Information about a OSPF host.
I32 ospfCurCfgHostIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.12.1.1	Integer32	read-only	The OSPF host number for which the OSPF host table is related.
IP ospfCurCfgHostIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.12.1.2	IpAddress	read-only	The IP Address of the OSPF host.
I32 ospfCurCfgHostAreaIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.12.1.3	Integer32	read-only	The area index.
INT ospfCurCfgHostCost	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.12.1.4	INTEGER	read-only	The cost of the OSPF host.
INT ospfCurCfgHostState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.12.1.5	INTEGER	read-only	Enable or disable an OSPF Host
ospfNewCfgHostTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.13		not-accessible	The table of OSPF Host configuration.
ospfNewCfgHostEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.13.1		not-accessible	Information about a OSPF host.
I32 ospfNewCfgHostIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.13.1.1	Integer32	read-only	The OSPF host number for which the OSPF host table is related.
IP ospfNewCfgHostIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.13.1.2	IpAddress	read-create	The IP Address of the OSPF host.
I32 ospfNewCfgHostAreaIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.13.1.3	Integer32	read-create	The OSPF area index.
INT ospfNewCfgHostCost	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.13.1.4	INTEGER	read-create	The cost of the OSPF host.
INT ospfNewCfgHostState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.13.1.5	INTEGER	read-create	Enable or disable an OSPF Host
INT ospfNewCfgHostDelete	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.13.1.6	INTEGER	read-write	Delete the OSPF host: no(0), yes(1)
ospfCurCfgRangeTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.14		not-accessible	The table of OSPF summary range in the current configuration.
ospfCurCfgRangeEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.14.1		not-accessible	Information about an OSPF summary range.
I32 ospfCurCfgRangeIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.14.1.1	Integer32	read-only	The range number for which the OSPF summary range table is related.
IP ospfCurCfgRangeAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.14.1.2	IpAddress	read-only	The IP Address of the range.
IP ospfCurCfgRangeMask	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.14.1.3	IpAddress	read-only	The mask of the range.
I32 ospfCurCfgRangeAreaIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.14.1.4	Integer32	read-only	The area index.
INT ospfCurCfgRangeHideState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.14.1.5	INTEGER	read-only	The state of the hide range.
INT ospfCurCfgRangeState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.14.1.6	INTEGER	read-only	The state of the range.
ospfNewCfgRangeTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.15		not-accessible	The table of OSPF summary range in the new configuration.
ospfNewCfgRangeEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.15.1		not-accessible	Information about an OSPF summary range.
I32 ospfNewCfgRangeIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.15.1.1	Integer32	read-only	The range number for which the OSPF summary range table is related.
IP ospfNewCfgRangeAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.15.1.2	IpAddress	read-create	The IP Address of the range.
IP ospfNewCfgRangeMask	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.15.1.3	IpAddress	read-create	The mask of the range.
I32 ospfNewCfgRangeAreaIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.15.1.4	Integer32	read-create	The area index.
INT ospfNewCfgRangeHideState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.15.1.5	INTEGER	read-create	The state of the hide range.
INT ospfNewCfgRangeState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.15.1.6	INTEGER	read-create	The state of the range.
INT ospfNewCfgRangeDelete	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.15.1.7	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ipGeneralCfg	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.14
IP ipCurCfgRouterID	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.14.1	IpAddress	read-only	The router ID of the switch.
IP ipNewCfgRouterID	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.14.2	IpAddress	read-write	The router ID of the switch.
igmpCfg	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15
INT igmpCurCfgOnOff	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.1	INTEGER	read-only	Globally turn IGMP On/Off.
INT igmpNewCfgOnOff	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.2	INTEGER	read-write	Globally turn IGMP On/Off.
igmpSnoopCfgGen	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3
igmpSnoopCfg	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1
I32 igmpSnoopCurCfgTimeout	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.1	Integer32	read-only	Set IGMP Report timeout.
I32 igmpSnoopNewCfgTimeout	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.2	Integer32	read-write	Set IGMP Report timeout.
I32 igmpSnoopCurCfgMrto	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.3	Integer32	read-only	The value of multicast router timeout in the current config.
I32 igmpSnoopNewCfgMrto	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.4	Integer32	read-write	The value of multicast router timeout in the new config.
I32 igmpSnoopNewCfgVlanFastlvAdd	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.12	Integer32	read-write	The VLAN to be added to fastleave vlan list. When read, 0 is returned.
I32 igmpSnoopNewCfgVlanFastlvRem	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.13	Integer32	read-write	The VLAN to be removed from fastleave vlan list. When read, 0 is returned.
OCT igmpSnoopCurCfgVlanFastlvBmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.14	OCTET STRING	read-only	The fastlv enabled vlans present in the in vlan map list. The fastlv enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Vlan 9 \|\| \|\| \|\| \|\|___ Vlan 8 \|\| \|____ Vlan 7 \|\| . . . \|\|_________ Vlan 2 \|__________ Vlan 1 where x : 1 - The represented vlan has fastlv enabled 0 - The represented vlan does not have fastlv enabled.
OCT igmpSnoopNewCfgVlanFastlvBmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.15	OCTET STRING	read-only	The fastlv enabled vlans present in the in vlan map list. The fastlv enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Vlan 9 \|\| \|\| \|\| \|\|___ Vlan 8 \|\| \|____ Vlan 7 \|\| . . . \|\|_________ Vlan 2 \|__________ Vlan 1 where x : 1 - The represented vlan has fastlv enabled 0 - The represented vlan does not have fastlv enabled.
I32 igmpSnoopCurCfgRobust	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.16	Integer32	read-only	The value of expected packet loss on subnet in the current config.
I32 igmpSnoopNewCfgRobust	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.17	Integer32	read-write	The value of expected packet loss on subnet in the new config.
I32 igmpSnoopNewCfgVlanAdd	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.18	Integer32	read-write	The VLAN to be added to snooping vlan list. When read, 0 is returned.
I32 igmpSnoopNewCfgVlanRem	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.19	Integer32	read-write	The VLAN to be removed from snooping vlan list. When read, 0 is returned.
INT igmpSnoopNewCfgVlanClear	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.20	INTEGER	read-write	Removing ALL Snooping Vlans.
OCT igmpSnoopCurCfgVlanBmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.21	OCTET STRING	read-only	The snooping vlans present in the in vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Vlan 9 \|\| \|\| \|\| \|\|___ Vlan 8 \|\| \|____ Vlan 7 \|\| . . . \|\|_________ Vlan 2 \|__________ Vlan 1 where x : 1 - The represented vlan has snoop enabled 0 - The represented vlan does not have snooping enabled.
OCT igmpSnoopNewCfgVlanBmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.22	OCTET STRING	read-only	The snooping vlans present in the in vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Vlan 9 \|\| \|\| \|\| \|\|___ Vlan 8 \|\| \|____ Vlan 7 \|\| . . . \|\|_________ Vlan 2 \|__________ Vlan 1 where x : 1 - The represented vlan has snoop enabled 0 - The represented vlan does not have snooping enabled.
I32 igmpSnoopCurCfgQInterval	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.23	Integer32	read-only	IGMP Query Interval of current config.
I32 igmpSnoopNewCfgQInterval	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.24	Integer32	read-write	IGMP Query Interval of new config.
IP igmpSnoopCurCfgSrcIp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.25	IpAddress	read-only	The source ip for GSQ proxy in current config.
IP igmpSnoopNewCfgSrcIp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.26	IpAddress	read-write	The source ip for GSQ proxy in new config.
INT igmpSnoopCurCfgAggrEnaDis	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.27	INTEGER	read-only	Enable/Disable of IGMP Report aggregation.
INT igmpSnoopNewCfgAggrEnaDis	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.28	INTEGER	read-write	Enable/Disable of IGMP Report aggregation.
igmpStaticMrtrCfg	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4
igmpStaticMrtrCurCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.1		not-accessible	The IGMP Static Multicast Router table in the current configuration block.
igmpStaticMrtrCurCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.1.1		not-accessible	A row in the Static Multicast Router table.
I32 igmpStaticMrtrCurCfgIndx	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.1.1.1	Integer32	read-only	The IGMP Multicast Router table port index.
I32 igmpStaticMrtrCurCfgPortId	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.1.1.2	Integer32	read-only	The IGMP Multicast Router port in the current configuration block.
I32 igmpStaticMrtrCurCfgVlanId	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.1.1.3	Integer32	read-only	The IGMP Multicast Router port in the current configuration block.
INT igmpStaticMrtrCurCfgVersion	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.1.1.4	INTEGER	read-only	The IGMP version of the IGMP Static Multicast Router.
igmpStaticMrtrNewCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.2		not-accessible	The IGMP Static Multicast Router table in the new configuration block.
igmpStaticMrtrNewCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.2.1		not-accessible	A row in the Static Multicast Router table.
I32 igmpStaticMrtrNewCfgIndx	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.2.1.1	Integer32	read-only	The IGMP Multicast Router table port index.
I32 igmpStaticMrtrNewCfgPortId	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.2.1.2	Integer32	read-create	The IGMP Multicast Router port in the new configuration block.
I32 igmpStaticMrtrNewCfgVlanId	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.2.1.3	Integer32	read-create	The IGMP Multicast Router port in the new configuration block.
INT igmpStaticMrtrNewCfgVersion	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.2.1.4	INTEGER	read-create	The IGMP version of the IGMP Static Multicast Router.
INT igmpStaticMrtrNewCfgDelete	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.2.1.5	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
igmpFilterCfg	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5
igmpFltCurCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.1		not-accessible	The IGMP filtering table in the current configuration block.
igmpFltCurCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.1.1		not-accessible	A row in the filtering table.
I32 igmpFltCurCfgIndx	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.1.1.1	Integer32	read-only	The IGMP filter table index.
IP igmpFltCurCfgMcastIp1	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.1.1.2	IpAddress	read-only	Range1 Multicast IP address to be filtered.
IP igmpFltCurCfgMcastIp2	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.1.1.3	IpAddress	read-only	Range2 Multicast IP address to be filtered.
INT igmpFltCurCfgAction	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.1.1.4	INTEGER	read-only	The action for the IGMP filtering rule.
INT igmpFltCurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.1.1.5	INTEGER	read-only	The state of this IGMP filtering rule.
igmpFltNewCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.2		not-accessible	The IGMP filtering table in the current configuration block.
igmpFltNewCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.2.1		not-accessible	A row in the filtering table.
I32 igmpFltNewCfgIndx	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.2.1.1	Integer32	read-create	The IGMP filter table index.
IP igmpFltNewCfgMcastIp1	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.2.1.2	IpAddress	read-create	Range1 Multicast source IP address to be filtered.
IP igmpFltNewCfgMcastIp2	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.2.1.3	IpAddress	read-create	Range2 Multicast source IP address to be filtered.
INT igmpFltNewCfgAction	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.2.1.4	INTEGER	read-create	The action for the IGMP filtering rule.
INT igmpFltNewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.2.1.5	INTEGER	read-create	The state of this IGMP filtering rule.
INT igmpFltNewCfgDelete	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.2.1.6	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
igmpFltCurCfgPortTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.3		not-accessible	The IGMP filtering port table in the current configuration block.
igmpFltCurCfgPortTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.3.1		not-accessible	A row in the IGMP filtering port table.
I32 igmpFltCurCfgPortIndx	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.3.1.1	Integer32	read-only	The port index.
INT igmpFltCurCfgPortState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.3.1.2	INTEGER	read-only	Enable or disable IGMP filtering.
OCT igmpFltCurCfgPortFiltBmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.3.1.3	OCTET STRING	read-only	The IGMP filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ filter 9 \|\| \|\| \|\| \|\|___ filter 8 \|\| \|____ filter 7 \|\| . . . \|\|_________ filter 2 \|__________ filter 1 (as index to igmpFltCurCfgTable) where x : 1 - The represented IGMP filter rule applied to the port 0 - The represented IGMP filter rule not applied to the port
igmpFltNewCfgPortTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.4		not-accessible	The IGMP filtering port table in the new configuration block.
igmpFltNewCfgPortTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.4.1		not-accessible	A row in the IGMP filtering port table.
I32 igmpFltNewCfgPortIndx	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.4.1.1	Integer32	read-only	The port index.
INT igmpFltNewCfgPortState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.4.1.2	INTEGER	read-create	Enable or disable IGMP filtering.
OCT igmpFltNewCfgPortFiltBmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.4.1.3	OCTET STRING	read-only	The IGMP filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ filter 9 \|\| \|\| \|\| \|\|___ filter 8 \|\| \|____ filter 7 \|\| . . . \|\|_________ filter 2 \|__________ filter 1 (as index to fltNewCfgTable) where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port
I32 igmpFltNewCfgPortAddFiltRule	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.4.1.4	Integer32	read-create	This is an action object to add filtering rule to a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be added to the port. The range of the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the value '0' is returned always.
I32 igmpFltNewCfgPortRemFiltRule	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.4.1.5	Integer32	read-create	This is an action object to remove filtering rule from a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be removed from the port. The range of the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the value '0' is returned always.
INT igmpFltCurCfgEnaDis	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.5	INTEGER	read-only	Enable/Disable of IGMP Filtering.
INT igmpFltNewCfgEnaDis	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.6	INTEGER	read-write	Enable/Disable of IGMP Filtering.
rip2Cfg	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18
ripCurCfgIntfTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1		not-accessible	The table of RIP on IP interface configuration in the current_config.
ripCurCfgIntfEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1		not-accessible	Information about RIP on IP interface.
INT ripCurCfgIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.1	INTEGER	read-only	The interface number for which the RIP information is related.
INT ripCurCfgIntfVersion	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.2	INTEGER	read-only	RIP version.
INT ripCurCfgIntfSupply	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.3	INTEGER	read-only	Enable or disable supplying route updates.
INT ripCurCfgIntfListen	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.4	INTEGER	read-only	Enable or disable listening to route updates.
INT ripCurCfgIntfDefault	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.5	INTEGER	read-only	Specifies what RIP does with default routes.
INT ripCurCfgIntfTrigUpdate	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.6	INTEGER	read-only	Enable or disable tirggered updates.
INT ripCurCfgIntfMcastUpdate	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.7	INTEGER	read-only	Enable or disable multicast updates.
INT ripCurCfgIntfPoisonReverse	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.8	INTEGER	read-only	RIP poison reverse.
INT ripCurCfgIntfState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.9	INTEGER	read-only	Enable or disable RIP protocol.
INT ripCurCfgIntfMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.10	INTEGER	read-only	RIP route metric for this interface.
INT ripCurCfgIntfAuth	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.11	INTEGER	read-only	Enable or disable RIP update authorization with a simple plain text password.
STR ripCurCfgIntfKey	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.12	DisplayString	read-only	RIP update authencation password.
INT ripCurCfgIntfSplitHorizon	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.13	INTEGER	read-only	RIP split horizon.
ripNewCfgIntfTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2		not-accessible	The table of RIP on IP interface configuration in the new_config.
ripNewCfgIntfEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1		not-accessible	Information about RIP on IP interface.
INT ripNewCfgIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.1	INTEGER	read-only	The interface number for which the RIP information is related.
INT ripNewCfgIntfVersion	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.2	INTEGER	read-write	RIP version.
INT ripNewCfgIntfSupply	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.3	INTEGER	read-write	Enable or disable supplying route updates.
INT ripNewCfgIntfListen	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.4	INTEGER	read-write	Enable or disable listening to route updates.
INT ripNewCfgIntfDefault	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.5	INTEGER	read-create	Specifies what RIP does with default routes. The default routes action could be set to listen/supply/both/none.
INT ripNewCfgIntfTrigUpdate	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.6	INTEGER	read-write	Enable or disable tirggered updates.
INT ripNewCfgIntfMcastUpdate	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.7	INTEGER	read-write	Enable or disable multicast updates.
INT ripNewCfgIntfPoisonReverse	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.8	INTEGER	read-write	RIP poison reverse.
INT ripNewCfgIntfState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.9	INTEGER	read-create	Enable or disable RIP protocol.
INT ripNewCfgIntfMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.10	INTEGER	read-write	RIP route metric for this interface.
INT ripNewCfgIntfAuth	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.11	INTEGER	read-write	Enable or disable RIP update authorization with a simple plain text password.
STR ripNewCfgIntfKey	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.12	DisplayString	read-create	RIP update authencation password.
INT ripNewCfgIntfSplitHorizon	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.13	INTEGER	read-write	RIP split horizon.
ripGeneral	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.3
INT rip2CurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.3.1	INTEGER	read-only	RIP global state.
INT rip2NewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.3.2	INTEGER	read-write	Globally turn RIP on or off.
INT rip2CurCfgUpdatePeriod	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.3.3	INTEGER	read-only	Update Period in seconds.
INT rip2NewCfgUpdatePeriod	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.3.4	INTEGER	read-write	Update Period in seconds.
ripRouteRedistribution	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4
ripRedistributeStatic	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.1
INT ripCurCfgStaticMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.1.1	INTEGER	read-only	The metric to be assigned to static routes. A value of 0 indicates none.
INT ripNewCfgStaticMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.1.2	INTEGER	read-write	The metric to be assigned to static routes. A value of 0 indicates none.
OCT ripCurCfgStaticOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.1.5	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
OCT ripNewCfgStaticOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.1.6	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ripNewCfgStaticAddOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.1.7	Integer32	read-write	The route map to be add into out-rmap list. When read, 0 is returned.
I32 ripNewCfgStaticRemoveOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.1.8	Integer32	read-write	The route map to be removed from out-rmap list. When read, 0 is returned.
ripRedistributeFixed	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.4
INT ripCurCfgFixedMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.4.1	INTEGER	read-only	The export metric for fixed routes. A value of 0 indicates none
INT ripNewCfgFixedMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.4.2	INTEGER	read-write	The export metric for fixed routes. A value of 0 indicates none
OCT ripCurCfgFixedOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.4.5	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
OCT ripNewCfgFixedOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.4.6	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ripNewCfgFixedAddOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.4.7	Integer32	read-write	The route map to be add into out-rmap list. When read, 0 is returned.
I32 ripNewCfgFixedRemoveOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.4.8	Integer32	read-write	The route map to be removed from out-rmap list. When read, 0 is returned.
ripRedistributeOspf	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.5
INT ripCurCfgOspfMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.5.1	INTEGER	read-only	The export metric for RIP routes. A value of 0 indicates none
INT ripNewCfgOspfMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.5.2	INTEGER	read-write	The export metric for RIP routes. A value of 0 indicates none
OCT ripCurCfgOspfOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.5.5	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
OCT ripNewCfgOspfOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.5.6	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ripNewCfgOspfAddOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.5.7	Integer32	read-write	The route map to be add into out-rmap list. When read, 0 is returned.
I32 ripNewCfgOspfRemoveOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.5.8	Integer32	read-write	The route map to be removed from out-rmap list. When read, 0 is returned.
ripRedistributeEospf	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.6
INT ripCurCfgEospfMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.6.1	INTEGER	read-only	The export metric for RIP routes. A value of 0 indicates none
INT ripNewCfgEospfMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.6.2	INTEGER	read-write	The export metric for RIP routes. A value of 0 indicates none
OCT ripCurCfgEospfOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.6.5	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
OCT ripNewCfgEospfOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.6.6	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ripNewCfgEospfAddOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.6.7	Integer32	read-write	The route map to be add into out-rmap list. When read, 0 is returned.
I32 ripNewCfgEospfRemoveOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.6.8	Integer32	read-write	The route map to be removed from out-rmap list. When read, 0 is returned.
layer3Stats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2
ripStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.1
C32 ripStatInPktsEx	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.1.1	Counter32	read-only	The total number of good RIP packets recieved.
C32 ripStatOutPkts	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.1.2	Counter32	read-only	The total number of RIP packets transmitted.
C32 ripStatInErrorPkts	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.1.3	Counter32	read-only	The total number of error RIP packets recieved.
C32 ripStatRoutesAgedOut	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.1.4	Counter32	read-only	The total number of RIP routes which have aged out.
arpStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.2
G32 arpStatEntries	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.2.1	Gauge32	read-only	The current number of ARP entries.
G32 arpStatHighWater	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.2.2	Gauge32	read-only	The highest number of ARP entries.
G32 arpStatMaxEntries	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.2.3	Gauge32	read-only	The maximum number of ARP entries.
routeStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.3
G32 routeStatEntries	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.3.1	Gauge32	read-only	The current number of IP routes.
G32 routeStatHighWater	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.3.2	Gauge32	read-only	The highest number of IP routes.
G32 routeStatMaxEntries	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.3.3	Gauge32	read-only	The maximum number of IP routes.
vrrpStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4
C32 vrrpStatInAdvers	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4.1	Counter32	read-only	The number of good VRRP advertisements which are received.
C32 vrrpStatOutAdvers	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4.2	Counter32	read-only	The number of good VRRP advertisements which are transmitted.
C32 vrrpStatOutBadAdvers	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4.3	Counter32	read-only	The number of bad VRRP advertisements which are received.
C32 vrrpStatBadVersion	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4.4	Counter32	read-only	The number of bad VRRP version adv which are received.
C32 vrrpStatBadAddress	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4.5	Counter32	read-only	The number of bad VRRP addres adv which are received.
C32 vrrpStatBadPassword	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4.6	Counter32	read-only	The number of bad VRRP advertisements which are received.
C32 vrrpStatBadVrid	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4.7	Counter32	read-only	The number of bad VRRP version ID adv which are received.
C32 vrrpStatBadData	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4.8	Counter32	read-only	The number of bad VRRP advertisements which are received.
C32 vrrpStatBadInterval	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4.9	Counter32	read-only	The number of bad VRRP iutervals which are received.
ospfStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5
ospfGeneralStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1
ospfCumRxTxStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1
C32 ospfCumRxPkts	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.1	Counter32	read-only	The sum total of all OSPF packets received on all OSPF areas and interfaces.
C32 ospfCumTxPkts	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.2	Counter32	read-only	The sum total of all OSPF packets transmitted on all OSPF areas and interfaces.
C32 ospfCumRxHello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.3	Counter32	read-only	The sum total of all Hello packets received on all OSPF areas and interfaces.
C32 ospfCumTxHello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.4	Counter32	read-only	The sum total of all Hello packets transmitted on all OSPF areas and interfaces.
C32 ospfCumRxDatabase	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.5	Counter32	read-only	The sum total of all Database Description packets received on all OSPF areas and interfaces.
C32 ospfCumTxDatabase	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.6	Counter32	read-only	The sum total of all Database Description packets transmitted on all OSPF areas and interfaces.
C32 ospfCumRxlsReqs	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.7	Counter32	read-only	The sum total of all Link State Request packets received on all OSPF areas and interfaces.
C32 ospfCumTxlsReqs	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.8	Counter32	read-only	The sum total of all Link State Request packets transmitted on all OSPF areas and interfaces.
C32 ospfCumRxlsAcks	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.9	Counter32	read-only	The sum total of all Link State Acknowledgement packets received on all OSPF areas and interfaces.
C32 ospfCumTxlsAcks	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.10	Counter32	read-only	The sum total of all Link State Acknowledgement packets transmitted on all OSPF areas and interfaces.
C32 ospfCumRxlsUpdates	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.11	Counter32	read-only	The sum total of all Link State Update packets received on all OSPF areas and interfaces.
C32 ospfCumTxlsUpdates	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.12	Counter32	read-only	The sum total of all Link State Update packets transmitted on all OSPF areas and interfaces.
ospfCumNbrChangeStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2
C32 ospfCumNbrhello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.1	Counter32	read-only	The sum total of all Hello packets received from neighbours on all OSPF areas and interfaces.
C32 ospfCumNbrStart	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.2	Counter32	read-only	The sum total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) across all OSPF areas and interfaces.
C32 ospfCumNbrAdjointOk	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.3	Counter32	read-only	The sum total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour across all OSPF areas and interfaces.
C32 ospfCumNbrNegotiationDone	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.4	Counter32	read-only	The sum total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, across all OSPF areas and interfaces.
C32 ospfCumNbrExchangeDone	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.5	Counter32	read-only	The sum total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, across all OSPF areas and interfaces.
C32 ospfCumNbrBadRequests	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.6	Counter32	read-only	The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across all interfaces and OSPF areas.
C32 ospfCumNbrBadSequence	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.7	Counter32	read-only	The sum total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for all OSPF areas and interfaces.
C32 ospfCumNbrLoadingDone	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.8	Counter32	read-only	The sum total number of link state updates received for all out-of-date portions of the database across all OSPF areas and interfaces.
C32 ospfCumNbrN1way	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.9	Counter32	read-only	The sum total number of Hello packets received from neighbours, in which this router is not mentioned across all OSPF interfaces and areas.
C32 ospfCumNbrRstAd	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.10	Counter32	read-only	The sum total number of times the Neighbour adjacency has been reset across all OPSF areas and interfaces.
C32 ospfCumNbrDown	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.11	Counter32	read-only	The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) across all OSPF areas and interfaces.
C32 ospfCumNbrN2way	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.12	Counter32	read-only	The sum total number of Hello packets received from neighbours, in which this router is mentioned across all OSPF interfaces and areas.
ospfCumIntfChangeStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.3
C32 ospfCumIntfHello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.3.1	Counter32	read-only	The sum total number of Hello packets sent on all interfaces and areas
C32 ospfCumIntfDown	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.3.2	Counter32	read-only	The sum total number of interfaces down in all OSPF areas.
C32 ospfCumIntfLoop	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.3.3	Counter32	read-only	The sum total of interfaces no longer connected to the attatched network across all OSPF areas and interfaces.
C32 ospfCumIntfUnloop	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.3.4	Counter32	read-only	The sum total number of interfaces, connected to the attatched network in all OSPF areas.
C32 ospfCumIntfWaitTimer	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.3.5	Counter32	read-only	The sum total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) across all OSPF areas and interfaces.
C32 ospfCumIntfBackup	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.3.6	Counter32	read-only	The sum total number of Backup Designated Routers on the attatched network for all OSPF areas and interfaces.
C32 ospfCumIntfNbrChange	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.3.7	Counter32	read-only	The sum total number of changes in the set of bidirectional neighbours associated with any interface across all OSPF areas.
ospfTimersKickOffStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.4
C32 ospfTmrsKckOffHello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.4.1	Counter32	read-only	The sum total number of times the Hello timer has been fired (which triggers the send of a Hello packet) across all OPSF areas and interfaces.
C32 ospfTmrsKckOffRetransmit	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.4.2	Counter32	read-only	The sum total number of times the Retransmit timer has been fired across all OPSF areas and interfaces.
C32 ospfTmrsKckOffLsaLock	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.4.3	Counter32	read-only	The sum total number of times the Lsa Lock timer has been fired across all OSPF areas and interfaces.
C32 ospfTmrsKckOffLsaAck	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.4.4	Counter32	read-only	The sum total number of times the Lsa Ack timer has been fired across all ospf areas and interfaces.
C32 ospfTmrsKckOffDbage	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.4.5	Counter32	read-only	The total number of times the Dbage has been fired.
C32 ospfTmrsKckOffSummary	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.4.6	Counter32	read-only	The total number of times the Summary timer has been fired.
C32 ospfTmrsKckOffAseExport	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.4.7	Counter32	read-only	The total number of times the ASE Export timer has been fired.
ospfArea	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2
ospfAreaRxTxStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1		not-accessible	The table of OSPF Area Rx/Tx Statistics.
ospfAreaRxTxStatsEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1		not-accessible	Rx Tx packet Statistics about a OSPF area.
I32 ospfAreaRxTxIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.1	Integer32	read-only	The index of the ospf Area for which these statistics apply.
C32 ospfAreaRxPkts	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.2	Counter32	read-only	The total number of OSPF packets received in this OSPF area.
C32 ospfAreaTxPkts	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.3	Counter32	read-only	The total number of OSPF packets transmitted in this OSPF area.
C32 ospfAreaRxHello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.4	Counter32	read-only	The total number of Hello packets received in this OSPF area.
C32 ospfAreaTxHello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.5	Counter32	read-only	The total number of Hello packets transmitted in this OSPF area.
C32 ospfAreaRxDatabase	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.6	Counter32	read-only	The total number of Database Description packets transmitted for this OSPF area.
C32 ospfAreaTxDatabase	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.7	Counter32	read-only	The total number of Database Description packets transmitted for this OSPF area.
C32 ospfAreaRxlsReqs	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.8	Counter32	read-only	The total number of Link State Request packets received for this OSPF area.
C32 ospfAreaTxlsReqs	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.9	Counter32	read-only	The total number of Link State Request packets transmitted for this OSPF area.
C32 ospfAreaRxlsAcks	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.10	Counter32	read-only	The total number of Link State Acknowledgement packets received for this OSPF area.
C32 ospfAreaTxlsAcks	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.11	Counter32	read-only	The total number of Link State Acknowledgement packets transmitted for this OSPF area.
C32 ospfAreaRxlsUpdates	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.12	Counter32	read-only	The total number of Link State Update packets received for this OSPF area.
C32 ospfAreaTxlsUpdates	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.13	Counter32	read-only	The total number of Link State Update packets transmitted for this OSPF area.
ospfAreaNbrChangeStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2		not-accessible	The table of OSPF Area Neighbour Statistics.
ospfAreaNbrChangeStatsEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1		not-accessible	Area Neighbour Change Statistics about a OSPF area.
I32 ospfAreaNbrIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.1	Integer32	read-only	The index of the ospf Area for which these statistics apply.
C32 ospfAreaNbrhello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.2	Counter32	read-only	The total number of Hello packets received from neighbours in this OSPF area.
C32 ospfAreaNbrStart	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.3	Counter32	read-only	The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF area.
C32 ospfAreaNbrAdjointOk	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.4	Counter32	read-only	The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF area.
C32 ospfAreaNbrNegotiationDone	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.5	Counter32	read-only	The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF area.
C32 ospfAreaNbrExchangeDone	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.6	Counter32	read-only	The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF area.
C32 ospfAreaNbrBadRequests	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.7	Counter32	read-only	The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across this OSPF area.
C32 ospfAreaNbrBadSequence	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.8	Counter32	read-only	The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this OSPF area.
C32 ospfAreaNbrLoadingDone	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.9	Counter32	read-only	The total number of link state updates received for all out-of-date portions of the database in this OSPF area.
C32 ospfAreaNbrN1way	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.10	Counter32	read-only	The total number of Hello packets received from neighbours, in which this router is not mentioned in this OSPF area.
C32 ospfAreaNbrRstAd	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.11	Counter32	read-only	The total number of times the Neighbour adjacency has been reset across this OPSF area.
C32 ospfAreaNbrDown	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.12	Counter32	read-only	The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) in this OSPF area.
C32 ospfAreaNbrN2way	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.13	Counter32	read-only	The total number of Hello packets received from neighbours, in which this router is mentioned in this OSPF area.
ospfAreaChangeStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3		not-accessible	The table of OSPF Area Change Statistics.
ospfAreaChangeStatsEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3.1		not-accessible	Area Change Statistics about a OSPF area.
I32 ospfAreaIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3.1.1	Integer32	read-only	The index of the OSPF Area for which these statistics apply.
C32 ospfAreaIntfHello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3.1.2	Counter32	read-only	The total number of Hello packets sent on this OSPF area.
C32 ospfAreaIntfDown	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3.1.3	Counter32	read-only	The total number of interfaces down in this OSPF area.
C32 ospfAreaIntfLoop	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3.1.4	Counter32	read-only	The total number of interfaces no longer connected to the attatched network in this OSPF area.
C32 ospfAreaIntfUnloop	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3.1.5	Counter32	read-only	The total number of interfaces connected to the attatched network in this OSPF area..
C32 ospfAreaIntfWaitTimer	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3.1.6	Counter32	read-only	The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF area.
C32 ospfAreaIntfBackup	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3.1.7	Counter32	read-only	The total number of Backup Designated Routers on the attatched network for this OSPF area.
C32 ospfAreaIntfNbrChange	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3.1.8	Counter32	read-only	The total number of changes in the set of bidirectional neighbours associated with the interface in this OSPF area.
ospfAreaErrorStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.4		not-accessible	The table of OSPF Area Error Statistics.
ospfAreaErrorStatsEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.4.1		not-accessible	Error Statistics for an OSPF area.
I32 ospfAreaErrIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.4.1.1	Integer32	read-only	The index of the OSPF Area for which these statistics apply.
C32 ospfAreaErrAuthFailure	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.4.1.2	Counter32	read-only	The total number of packets received with a wrong password in this area.
C32 ospfAreaErrNetmaskMismatch	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.4.1.3	Counter32	read-only	The total number of packets received with a wrong netmask in this area.
C32 ospfAreaErrHelloMismatch	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.4.1.4	Counter32	read-only	The total number of packets received with a different hello interval in this area.
C32 ospfAreaErrDeadMismatch	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.4.1.5	Counter32	read-only	The total number of packets received with a different dead interval in this area.
C32 ospfAreaErrOptionsMismatch	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.4.1.6	Counter32	read-only	The total number of packets received with a different options in this area.
C32 ospfAreaErrUnknownNbr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.4.1.7	Counter32	read-only	The total number of packets received from an unknown neighbor in this area.
ospfInterface	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3
ospfIntfRxTxStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1		not-accessible	The table of OSPF Interface Rx/Tx packet Statistics.
ospfIntfRxTxStatsEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1		not-accessible	OSPF interface Rx/Tx packet statistics.
I32 ospfIntfRxTxIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.1	Integer32	read-only	The OSPF interface for which these statistics apply.
C32 ospfIntfRxPkts	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.2	Counter32	read-only	The total number of OSPF packets received for this OSPF interface.
C32 ospfIntfTxPkts	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.3	Counter32	read-only	The total number of OSPF packets transmitted for this OSPF interface.
C32 ospfIntfRxHello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.4	Counter32	read-only	The total number of Hello packets received for this OSPF interface.
C32 ospfIntfTxHello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.5	Counter32	read-only	The total number of Hello packets transmitted for this OSPF interface.
C32 ospfIntfRxDatabase	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.6	Counter32	read-only	The total number of Database Description packets received for this OSPF interface.
C32 ospfIntfTxDatabase	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.7	Counter32	read-only	The total number of Database Description packets transmitted for this OSPF interface.
C32 ospfIntfRxlsReqs	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.8	Counter32	read-only	The total number of Link State Request packets received for this OSPF interface.
C32 ospfIntfTxlsReqs	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.9	Counter32	read-only	The total number of Link State Request packets transmitted for this OSPF interface.
C32 ospfIntfRxlsAcks	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.10	Counter32	read-only	The total number of Link State Acknowledgement packets received for this OSPF interface.
C32 ospfIntfTxlsAcks	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.11	Counter32	read-only	The total number of Link State Acknowledgement packets transmitted for this OSPF interface.
C32 ospfIntfRxlsUpdates	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.12	Counter32	read-only	The total number of Link State Update packets received for this OSPF interface.
C32 ospfIntfTxlsUpdates	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.13	Counter32	read-only	The total number of Link State Update packets transmitted for this OSPF interface.
ospfIntfNbrChangeStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2		not-accessible	The table of OSPF Interface Neighbour change Statistics.
ospfIntfNbrChangeStatsEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1		not-accessible	OSPF interface Neighbour Change statistics.
I32 ospfIntfNbrIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.1	Integer32	read-only	The index of the OSPF Interface for which these statistics apply.
C32 ospfIntfNbrhello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.2	Counter32	read-only	The total number of Hello packets received from neighbours in this OSPF interface.
C32 ospfIntfNbrStart	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.3	Counter32	read-only	The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF interface.
C32 ospfIntfNbrAdjointOk	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.4	Counter32	read-only	The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF interface.
C32 ospfIntfNbrNegotiationDone	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.5	Counter32	read-only	The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF interface.
C32 ospfIntfNbrExchangeDone	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.6	Counter32	read-only	The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF interface.
C32 ospfIntfNbrBadRequests	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.7	Counter32	read-only	The total number of Link State Requests which have been received for a link state advertisement not contained in the database for this interface.
C32 ospfIntfNbrBadSequence	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.8	Counter32	read-only	The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this interface.
C32 ospfIntfNbrLoadingDone	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.9	Counter32	read-only	The total number of link state updates received for all out-of-date portions of the database for this OSPF interface.
C32 ospfIntfNbrN1way	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.10	Counter32	read-only	The total number of Hello packets received from neighbours, in which this router is not mentioned for this OSPF interface.
C32 ospfIntfNbrRstAd	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.11	Counter32	read-only	The sum total number of times the Neighbour adjacency has been reset on this interface.
C32 ospfIntfNbrDown	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.12	Counter32	read-only	The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) for this interface.
C32 ospfIntfNbrN2way	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.13	Counter32	read-only	The total number of Hello packets received from neighbours, in which this router is mentioned for this OSPF interface.
ospfIntfChangeStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3		not-accessible	The table of OSPF Interface change Statistics.
ospfIntfChangeStatsEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3.1		not-accessible	OSPF interface Change statistics.
I32 ospfIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3.1.1	Integer32	read-only	The index of the OSPF Interface for which these statistics apply.
C32 ospfIntfHello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3.1.2	Counter32	read-only	The total number of Hello packets sent by this interface.
C32 ospfIntfDown	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3.1.3	Counter32	read-only	The total number of times the interface was down.
C32 ospfIntfLoop	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3.1.4	Counter32	read-only	The total number of times the interface was no longer connected to the attatched network.
C32 ospfIntfUnloop	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3.1.5	Counter32	read-only	The total number of times the interface, connected back to the attatched network.
C32 ospfIntfWaitTimer	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3.1.6	Counter32	read-only	The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF interface.
C32 ospfIntfBackup	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3.1.7	Counter32	read-only	The total number of Backup Designated Routers on the attatched network for this OSPF interface.
C32 ospfIntfNbrChange	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3.1.8	Counter32	read-only	The total number of changes in the set of bidirectional neighbours associated with the interface for this OSPF interface.
ospfIntfErrorStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.4		not-accessible	The table of OSPF Interface Error Statistics.
ospfIntfErrorStatsEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.4.1		not-accessible	Error Statistics for an OSPF area.
I32 ospfIntfErrIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.4.1.1	Integer32	read-only	The index of the OSPF Intf for which these statistics apply.
C32 ospfIntfErrAuthFailure	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.4.1.2	Counter32	read-only	The total number of packets received with a wrong password in this area.
C32 ospfIntfErrNetmaskMismatch	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.4.1.3	Counter32	read-only	The total number of packets received with a wrong netmask in this area.
C32 ospfIntfErrHelloMismatch	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.4.1.4	Counter32	read-only	The total number of packets received with a different hello interval in this area.
C32 ospfIntfErrDeadMismatch	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.4.1.5	Counter32	read-only	The total number of packets received with a different dead interval in this area.
C32 ospfIntfErrOptionsMismatch	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.4.1.6	Counter32	read-only	The total number of packets received with a different options in this area.
C32 ospfIntfErrUnknownNbr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.4.1.7	Counter32	read-only	The total number of packets received from an unknown neighbor in this area.
clearStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.6
INT ipClearStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.6.1	INTEGER	read-write	Setting this to clear(1) results in clearing the IP statistics.
ifStatsTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.6.2		not-accessible	The table of Interface Statistics.
ifStatsEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.6.2.1		not-accessible	IP Interface statistics.
I32 ifStatsIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.6.2.1.1	Integer32	read-only	The index of the IP interface for which these statistics apply.
INT ifClearStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.6.2.1.2	INTEGER	read-write	Setting this to clear(1) results in clearing the statistics for this IP interface (if) stats.
igmpStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7
igmpSnoopStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1		not-accessible	The table of OSPF Interface Error Statistics.
igmpSnoopStatsEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1		not-accessible	Statistics for IGMP Snooping.
I32 igmpSnoopVlanIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.1	Integer32	read-only	The index of the VLAN for which these statistics apply.
C32 rxIgmpValidPkts	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.2	Counter32	read-only	The total number of valid IGMP packets received on this VLAN.
C32 rxIgmpInvalidPkts	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.3	Counter32	read-only	The total number of invalid IGMP packets received on this VLAN.
C32 rxIgmpGenQueries	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.4	Counter32	read-only	The total number of IGMP General Query packets received on this VLAN.
C32 rxIgmpGrpSpecificQueries	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.5	Counter32	read-only	The total number of IGMP Group Specific Query packets received on this VLAN.
C32 rxIgmpLeaves	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.6	Counter32	read-only	The total number of IGMP Leave packets received on this VLAN.
C32 rxIgmpReports	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.7	Counter32	read-only	The total number of IGMP Report packets received on this VLAN.
C32 txIgmpGrpSpecificQueries	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.8	Counter32	read-only	The total number of IGMP Group Specific Query packets transmitted on this VLAN.
C32 txIgmpReports	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.9	Counter32	read-only	The total number of IGMP Report packets transmitted on this VLAN.
C32 txIgmpLeaves	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.10	Counter32	read-only	The total number of IGMP Leave packets transmitted on this VLAN.
INT igmpClearVlanStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.11	INTEGER	read-write	Setting this to clear(1) results in clearing the statistics for this snooping VLAN.
INT igmpClearAllStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.2	INTEGER	read-write	Setting this to clear(1) results in clearing the IGMP statistics.
rip2Stats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13
C32 ripStatInPackets	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.1	Counter32	read-only	The total number of RIP packets recieved.
C32 ripStatOutPackets	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.2	Counter32	read-only	The total number of RIP packets transmitted.
C32 ripStatInRequestPkts	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.3	Counter32	read-only	The total number of RIP requests recieved.
C32 ripStatInResponsePkts	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.4	Counter32	read-only	The total number of RIP response recieved.
C32 ripStatOutRequestPkts	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.5	Counter32	read-only	The total number of RIP requests transmitted.
C32 ripStatOutResponsePkts	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.6	Counter32	read-only	The total number of RIP responses transmitted.
C32 ripStatRouteTimeout	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.7	Counter32	read-only	The total number of RIP route timeouts.
C32 ripStatInBadSizePkts	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.8	Counter32	read-only	The total number of bad size RIP packets recieved.
C32 ripStatInBadVersion	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.9	Counter32	read-only	The total number of RIP bad versions recieved.
C32 ripStatInBadZeros	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.10	Counter32	read-only	The total number of RIP bad zeros recieved.
C32 ripStatInBadSourcePort	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.11	Counter32	read-only	The total number of RIP bad source port recieved.
C32 ripStatInBadSourceIP	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.12	Counter32	read-only	The total number of RIP bad source IP recieved.
C32 ripStatInSelfRcvPkts	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.13	Counter32	read-only	The total number of RIP packets from self received.
dnsStats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.14
C32 dnsStatInGoodDnsRequests	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.14.1	Counter32	read-only	The total number of good DNS request packets received.
C32 dnsStatOutDnsRequests	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.14.2	Counter32	read-only	The total number of DNS request packets
C32 dnsStatInBadDnsRequests	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.14.3	Counter32	read-only	The total number of bad DNS request packets received
geal3Stats	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.15
I32 maxL3TableSize	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.15.1	Integer32	read-only	Max L3 table size
I32 noL3EntriesUsed	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.15.2	Integer32	read-only	Number of L3 entries used
I32 maxLpmTableSize	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.15.3	Integer32	read-only	Max LPM table size
I32 noLpmEntriesUsed	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.15.4	Integer32	read-only	Number of LPM entries used
I32 maxBlockInLpmTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.15.5	Integer32	read-only	Max number of blocks in LPM table
I32 noBlocksUsedInLpmTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.15.6	Integer32	read-only	Number of blocks used in LPM table
layer3Info	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3
ipRoutingInfo	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1
ipRouteInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1		not-accessible	The table of run-time IP routes.
ipRouteInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1.1		not-accessible	A row in the run-time IP route table
I32 ipRouteInfoIndx	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1.1.1	Integer32	read-only	The index of this route table.
IP ipRouteInfoDestIp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1.1.2	IpAddress	read-only	The destination IP address of this route.
IP ipRouteInfoMask	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1.1.3	IpAddress	read-only	The destination IP mask of this route.
IP ipRouteInfoGateway	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1.1.4	IpAddress	read-only	The next-hop router address for this route.
INT ipRouteInfoTag	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1.1.5	INTEGER	read-only	The tag-type for this route.
INT ipRouteInfoType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1.1.6	INTEGER	read-only	The type of the route.
I32 ipRouteInfoInterface	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1.1.7	Integer32	read-only	The interface number for which the destination address is applicable.
I32 ipRouteInfoMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1.1.8	Integer32	read-only	The metric of this route.
INT routeTableClear	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.2	INTEGER	read-write	Setting this value to clear(2) clears the route table.
arpInfo	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2
arpInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2.1		not-accessible	The table of ARP entries.
arpInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2.1.1		not-accessible	A row in the ARP table
IP arpInfoDestIp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2.1.1.1	IpAddress	read-only	The destination IP address of the ARP entry.
PHY arpInfoMacAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2.1.1.2	PhysAddress	read-only	The MAC address for the ARP entry.
I32 arpInfoVLAN	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2.1.1.3	Integer32	read-only	The VLAN identifier for the ARP entry.
I32 arpInfoSrcPort	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2.1.1.4	Integer32	read-only	The port number on which this entry's equivalence is effective.
I32 arpInfoRefPorts	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2.1.1.5	Integer32	read-only	The rference ports associated with this ARP entry.
INT arpInfoFlag	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2.1.1.6	INTEGER	read-only	The flag associated with this ARP entry.
INT arpCacheClear	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2.2	INTEGER	read-write	Setting this value to clear(2) clears the ARP cache.
vrrpInfo	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3
vrrpInfoVirtRtrTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1		not-accessible	The table of VRRP virtual router run-time information.
vrrpInfoVirtRtrTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1		not-accessible	The run-time information about a VRRP virtual router.
I32 vrrpInfoVirtRtrIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.1	Integer32	read-only	The VRRP virtual router index.
INT vrrpInfoVirtRtrConfig	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.2	INTEGER	read-only	The status of the VRRP virtual router.
INT vrrpInfoVirtRtrID	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.3	INTEGER	read-only	The VRRP virtual router identifier.
IP vrrpInfoVirtRtrAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.4	IpAddress	read-only	The VRRP virtual router IP address.
I32 vrrpInfoVirtRtrIfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.5	Integer32	read-only	The IfIndex that the VRRP virtual router is representing.
INT vrrpInfoVirtRtrPriority	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.6	INTEGER	read-only	The priority value to be used by the specified VRRP virtual routers.
INT vrrpInfoVirtRtrState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.7	INTEGER	read-only	The VRRP virtual router state.
INT vrrpInfoVirtRtrOwnership	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.8	INTEGER	read-only	The VRRP virtual router ownership status.
INT vrrpInfoVirtRtrServer	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.9	INTEGER	read-only	The VRRP server state identifies virtual routers that support Layer 4 services.
INT vrrpInfoVirtRtrProxy	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.10	INTEGER	read-only	The VRRP proxy state identifies virtual proxy routers.
ospfInfo	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4
ospfGeneralInfo	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1
INT ospfVersion	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.1	INTEGER	read-only	OSPF version.
IP ospfRouterID	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.2	IpAddress	read-only	The router ID of the switch.
I32 ospfStartTime	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.3	Integer32	read-only	The time when ospf has been started.
C32 ospfProcessUptime	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.4	Counter32	read-only	The time since ospf has been started.
I32 ospfLsTypesSupported	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.5	Integer32	read-only	The Link State Types that are supported.
INT ospfAreaBorderRouter	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.6	INTEGER	read-only	Area Border Router Role.
INT ospfAreaBoundaryRouter	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.7	INTEGER	read-only	Area Boundary Router Role.
I32 ospfExternalLsa	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.8	Integer32	read-only	The number of external LSAs.
I32 ospfIntfCountForRouter	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.9	Integer32	read-only	The number of interfaces for this router.
I32 ospfVlinkCountForRouter	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.10	Integer32	read-only	The number of virtual links for this router.
I32 ospfNewLsaReceived	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.11	Integer32	read-only	The number of new LSAs reveived.
I32 ospfTotalLsaOriginated	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.12	Integer32	read-only	The number of LSAs originated.
I32 ospfTotalNumberOfLsdbEntries	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.13	Integer32	read-only	Total number of entries in the Link State Database.
I32 ospfTotalNeighbours	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.14	Integer32	read-only	The total number of OSPF neighbours.
I32 ospfNbrInInitState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.15	Integer32	read-only	The number of neighbours in the initial state of exchange.
I32 ospfNbrInExchState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.16	Integer32	read-only	The number of neighbours in the exchange state.
I32 ospfNbrInFullState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.17	Integer32	read-only	The number of neighbours in the Full state of exchange.
I32 ospfTotalAreas	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.18	Integer32	read-only	The Total number of areas.
I32 ospfTotalTransitAreas	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.19	Integer32	read-only	The Total number of Transit areas.
I32 ospfTotalNssaAreas	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.20	Integer32	read-only	The Total number of NSSA areas.
ospfAreaInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2		not-accessible	The table of OSPF Area information.
ospfAreaInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1		not-accessible	Information about a OSPF area.
I32 ospfAreaInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.1	Integer32	read-only	The OSPF area number for which the OSPF info table is related.
IP ospfAreaInfoId	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.2	IpAddress	read-only	The IP address of the OSPF area.
INT ospfAreaInfoStatus	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.3	INTEGER	read-only	Area Status: disabled(0), enabled(1).
I32 ospfTotalNumberOfInterfaces	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.4	Integer32	read-only	The total number of interfaces for this OSPF area.
I32 ospfNumberOfInterfacesUp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.5	Integer32	read-only	The number of interfaces UP in area.
INT ospfAreaInfoAuthType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.6	INTEGER	read-only	Type of authentication being used: none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
I32 ospfAreaInfoSPF	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.7	Integer32	read-only	The number of times SPF ran.
I32 ospfNumberOfLsdbEntries	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.8	Integer32	read-only	The number of Link State Database entries for this OSPF area.
I32 ospfAreaInfoAreaBorderRouter	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.9	Integer32	read-only	The Area Border Router count.
I32 ospfAreaInfoASBoundaryRouter	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.10	Integer32	read-only	The AS Boundary Router count.
I32 ospfAreaInfoTotalNeighbours	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.11	Integer32	read-only	The total number of OSPF neighbors.
ospfIntfInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3		not-accessible	The table of OSPF Interface information.
ospfIntfInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1		not-accessible	Information about a OSPF interface.
I32 ospfIfInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.1	Integer32	read-only	The OSPF interface number for which the OSPF info table is related.
IP ospfIfInfoIpAddress	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.2	IpAddress	read-only	The IP address of the OSPF interface.
INT ospfIfInfoArea	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.3	INTEGER	read-only	The index of the area that the interface belongs.
INT ospfIfInfoAdminStatus	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.4	INTEGER	read-only	Admin Status of the interface: down(0), up(1).
IP ospfIfInfoRouterID	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.5	IpAddress	read-only	The router ID of the switch.
INT ospfIfInfoState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.6	INTEGER	read-only	The state of the interface: Down(0), Loopback(1), Waiting(2), P to P(3), DR(4), BackuDR(5), DR Other(6).
INT ospfIfInfoPriority	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.7	INTEGER	read-only	Interface router priority
IP ospfIfInfoDesignatedRouterID	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.8	IpAddress	read-only	The OSPF Designated Router ID for this OSPF interface.
IP ospfIfInfoDesignatedRouterIpAddress	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.9	IpAddress	read-only	The OSPF Designated Router IP Address for this OSPF interface.
IP ospfIfInfoBackupDesignatedRouterID	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.10	IpAddress	read-only	The OSPF Backup Designated Router ID for this OSPF interface.
IP ospfIfInfoBackupDesignatedRouterIpAddress	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.11	IpAddress	read-only	The OSPF Backup Designated Router Ip Address for this OSPF interface.
INT ospfIfInfoHello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.12	INTEGER	read-only	The hello timer for this OSPF interface.
INT ospfIfInfoDead	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.13	INTEGER	read-only	The dead timer for this OSPF interface.
I32 ospfIfInfoWait	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.14	Integer32	read-only	The OSPF Wait interval for this OSPF interface.
INT ospfIfInfoRetransmit	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.15	INTEGER	read-only	The retransmit interval for this OSPF interface.
INT ospfIfInfoTransitDelay	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.16	INTEGER	read-only	The transit delay for this OSPF interface.
I32 ospfIfInfoTotalNeighbours	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.17	Integer32	read-only	The total number of neighbours for this OSPF interface.
I32 ospfIfInfoEvents	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.18	Integer32	read-only	The total number of events for this OSPF interface.
INT ospfIfInfoAuthType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.19	INTEGER	read-only	Type of authentication being used: none(1) - no authentication, password(2) - use password
ospfIfNbrTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.5		not-accessible	The table of OSPF Interface Neighbor information.
ospfIfNbrEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.5.1		not-accessible	Information about a OSPF interface, neighbor pair.
I32 ospfIfNbrIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.5.1.1	Integer32	read-only	The OSPF Interface number for which this Interface/Nbr table is related.
IP ospfIfNbrIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.5.1.2	IpAddress	read-only	The OSPF Neighbor ID .
I32 ospfIfNbrPriority	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.5.1.3	Integer32	read-only	The priority of the OSPF neighbor.
INT ospfIfNbrState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.5.1.4	INTEGER	read-only	The state of the OSPF neighbor.
IP ospfIfNbrDesignatedRtr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.5.1.5	IpAddress	read-only	The IP Address of the Designated Router for this OSPF Neighbor.
IP ospfIfNbrBackupDesignatedRtr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.5.1.6	IpAddress	read-only	The IP Address of the backup designated Router for this OSPF Neighbor.
IP ospfIfNbrIpAddress	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.5.1.7	IpAddress	read-only	The IP Address of the OSPF Neighbor.
igmpInfo	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5
igmpInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.1		not-accessible	The table of IGMP group membership information.
igmpInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.1.1		not-accessible	Information about an IGMP group member .
I32 igmpInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.1.1.1	Integer32	read-only	The igmp group number for which the IGMP info table is related.
IP igmpInfoGroupId	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.1.1.2	IpAddress	read-only	The IP address of the IGMP group.
I32 igmpInfoVlanId	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.1.1.3	Integer32	read-only	The VLAN ID for this IGMP group.
INT igmpInfoVersion	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.1.1.5	INTEGER	read-only	The Version of IGMP host.
I32 igmpInfoPortNum	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.1.1.6	Integer32	read-only	The Version of IGMP host.
STR igmpInfoExpires	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.1.1.7	DisplayString	read-only	The expiration time for this host.
igmpMrtrInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.2		not-accessible	The table of IGMP mrouters.
igmpMrtrInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.2.1		not-accessible	Information about an IGMP mrouter.
I32 igmpMrtrInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.2.1.1	Integer32	read-only	The mrouter number for which the IGMP mrouter info table is related.
I32 igmpMrtrInfoVlanId	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.2.1.2	Integer32	read-only	The VLAN ID on which this IGMP mrouter is attached.
I32 igmpMrtrInfoPortId	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.2.1.3	Integer32	read-only	The port on which this IGMP mrouter is attached.
I32 igmpMrtrInfoVersion	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.2.1.4	Integer32	read-only	The version of this IGMP mrouter.
STR igmpMrtrInfoExpires	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.2.1.5	DisplayString	read-only	The expiration time for this mrouter.
I32 igmpMrtrInfoMrt	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.2.1.6	Integer32	read-only	The Maximum Query Response time of this IGMP mrouter.
rip2Info	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7
rip2GeneralInfo	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.1
INT ripInfoState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.1.1	INTEGER	read-only	RIP global state.
INT ripInfoUpdatePeriod	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.1.2	INTEGER	read-only	Update Period in seconds.
rip2InfoIntfTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2		not-accessible	The information table of RIP.
ripInfoIntfEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1		not-accessible	Information about RIP on IP interface.
I32 ripInfoIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.1	Integer32	read-only	The interface number for which the RIP information is related.
INT ripInfoIntfVersion	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.2	INTEGER	read-only	RIP version.
IP ripInfoIntfAddress	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.3	IpAddress	read-only	The interface address.
INT ripInfoIntfState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.4	INTEGER	read-only	The status of RIP protocol.
INT ripInfoIntfListen	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.5	INTEGER	read-only	The status of listening to route updates.
INT ripInfoIntfTrigUpdate	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.6	INTEGER	read-only	The status of triggered updates.
INT ripInfoIntfMcastUpdate	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.7	INTEGER	read-only	The status of multicast updates.
INT ripInfoIntfPoisonReverse	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.8	INTEGER	read-only	The status of RIP poison reverse.
INT ripInfoIntfSupply	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.9	INTEGER	read-only	The status of supplying route updates.
INT ripInfoIntfMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.10	INTEGER	read-only	RIP route metric for this interface.
INT ripInfoIntfAuth	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.11	INTEGER	read-only	The type of Authentication used on this interface.
STR ripInfoIntfKey	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.12	DisplayString	read-only	RIP update authentication password.
INT ripInfoIntfDefault	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.13	INTEGER	read-only	Specifies what RIP does with default routes.
ipInfo	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8
IP ipInfoRouterID	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.1	IpAddress	read-only	Router ID information.
ipIntfInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.2		not-accessible	The table of IP interface information.
intfInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.2.1		not-accessible	A row in IP interface information table.
I32 intfInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.2.1.1	Integer32	read-only	The interface number for which the information is related.
STR intfInfoAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.2.1.2	DisplayString	read-only	The IP address of the interface.
STR intfInfoNetMask	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.2.1.3	DisplayString	read-only	The subnet mask of the interface.
STR intfInfoBcastAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.2.1.4	DisplayString	read-only	The broadcast address of the interface.
I32 intfInfoVlan	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.2.1.5	Integer32	read-only	The VLAN number for this interface.
INT intfInfoStatus	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.2.1.6	INTEGER	read-only	The status of the interface.
gatewayInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.3		not-accessible	The table containing information for the default gateways.
gatewayInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.3.1		not-accessible	A row in the gateway information table
I32 gatewayInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.3.1.1	Integer32	read-only	The gateway number for which the information is related.
IP gatewayInfoAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.3.1.2	IpAddress	read-only	The IP address of the default gateway.
INT gatewayInfoStatus	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.3.1.4	INTEGER	read-only	The status of the default gateway.
INT ipInfoBootpRelayState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.4	INTEGER	read-only	The state of BOOTP relay.
IP ipInfoBootpRelayAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.5	IpAddress	read-only	The IP address of BOOTP server.
IP ipInfoBootpRelayAddr2	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.6	IpAddress	read-only	The IP address of second BOOTP server.
INT ipInfoFwdState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.7	INTEGER	read-only	IP forwarding global state.
INT ipInfoFwdDirectedBcast	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.8	INTEGER	read-only	The state of forwarding directed broadcasts.
ipInfoNwfTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.9		not-accessible	The table of IP network filter information.
ipInfoNwfEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.9.1		not-accessible	A row in the IP network filter information table.
I32 ipInfoNwfIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.9.1.1	Integer32	read-only	The netowrk filter number for which the NWF is related.
IP ipInfoNwfAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.9.1.2	IpAddress	read-only	The IP address of the network filter.
IP ipInfoNwfMask	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.9.1.3	IpAddress	read-only	The subnet mask of the network filter.
INT ipInfoNwfState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.9.1.4	INTEGER	read-only	The state of the network filter.
ipInfoRmapTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10		not-accessible	The table of IP route map information.
ipInfoRmapEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10.1		not-accessible	Information about an IP route map.
I32 ipInfoRmapIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10.1.1	Integer32	read-only	The route map number for which the RMAP is related.
U32 ipInfoRmapLp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10.1.2	Unsigned32	read-only	The local-preference of the route map. 4294967295 means none
U32 ipInfoRmapMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10.1.3	Unsigned32	read-only	The metric of the route map. 4294967295 means none
INT ipInfoRmapPrec	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10.1.4	INTEGER	read-only	The precedence of the route map.
INT ipInfoRmapWeight	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10.1.5	INTEGER	read-only	The weight of the route map. 65535 means none
INT ipInfoRmapState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10.1.6	INTEGER	read-only	Enable or disable the route map.
STR ipInfoRmapAp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10.1.7	DisplayString	read-only	The as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is: [][ ]
INT ipInfoRmapMetricType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10.1.8	INTEGER	read-only	The OSPF metric-type of the matched route.
ipOspfInfo	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11
INT ipOspfInfoState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.1	INTEGER	read-only	OSPF global state.
INT ipOspfInfoDefaultRouteMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.2	INTEGER	read-only	The metric to be assigned.
INT ipOspfInfoDefaultRouteMetricType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.3	INTEGER	read-only	The AS External metric type to be assigned.
IP ipOspfInfoRouterID	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.4	IpAddress	read-only	The router ID of the switch.
INT ipOspfInfoLsdbLimit	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.5	INTEGER	read-only	The LSDB limit for external LSA.
ipOspfAreaInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.6		not-accessible	The table of OSPF Area Information.
ipOspfAreaInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.6.1		not-accessible	Information about a OSPF area.
I32 ipOspfAreaInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.6.1.1	Integer32	read-only	The OSPF area number for which the OSPF area table is related.
IP ipOspfAreaInfoId	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.6.1.2	IpAddress	read-only	The IP Address of the OSPF area.
INT ipOspfAreaInfoSpfInterval	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.6.1.3	INTEGER	read-only	The SPF interval for the OSPF area.
INT ipOspfAreaInfoAuthType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.6.1.4	INTEGER	read-only	Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
INT ipOspfAreaInfoType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.6.1.5	INTEGER	read-only	Type of Area. transit(0) stub(1) nssa(2)
INT ipOspfAreaInfoMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.6.1.6	INTEGER	read-only	Metric (1-65535)
INT ipOspfAreaInfoStatus	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.6.1.7	INTEGER	read-only	Status disabled(0) enabled(1)
ipOspfRangeInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.7		not-accessible	The table of OSPF summary range information.
ipOspfRangeInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.7.1		not-accessible	Information about an OSPF summary range.
I32 ipOspfRangeInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.7.1.1	Integer32	read-only	The range number for which the OSPF summary range table is related.
IP ipOspfRangeInfoAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.7.1.2	IpAddress	read-only	The IP Address of the range.
IP ipOspfRangeInfoMask	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.7.1.3	IpAddress	read-only	The mask of the range.
I32 ipOspfRangeInfoAreaIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.7.1.4	Integer32	read-only	The area index.
INT ipOspfRangeInfoHideState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.7.1.5	INTEGER	read-only	The state of the hide range.
INT ipOspfRangeInfoState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.7.1.6	INTEGER	read-only	The state of the range.
ipOspfIntfInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8		not-accessible	The table of OSPF Interface Information.
ipOspfIntfInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1		not-accessible	Information about an OSPF Interface.
I32 ipOspfIntfInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.1	Integer32	read-only	The OSPF Interface number for which the OSPF Interface table is related.
IP ipOspfIntfInfoId	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.2	IpAddress	read-only	The IP Address of the OSPF interface.
INT ipOspfIntfInfoArea	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.3	INTEGER	read-only	The index of the area that the interface belongs
INT ipOspfIntfInfoMdkey	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.4	INTEGER	read-only	The MD5 key for the OSPF interface 0 (none) no MD5 authentication.
INT ipOspfIntfInfoCost	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.5	INTEGER	read-only	Interface cost
INT ipOspfIntfInfoPrio	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.6	INTEGER	read-only	Interface router priority
INT ipOspfIntfInfoHello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.7	INTEGER	read-only	Hello interval
INT ipOspfIntfInfoDead	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.8	INTEGER	read-only	Dead interval
INT ipOspfIntfInfoTrans	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.9	INTEGER	read-only	Transit delay
INT ipOspfIntfInfoRetra	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.10	INTEGER	read-only	Retransmit interval
STR ipOspfIntfInfoAuthKey	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.11	DisplayString	read-only	Authentication Key
INT ipOspfIntfInfoStatus	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.12	INTEGER	read-only	Status of the interface disabled(0), enabled(1)
ipOspfVirtIntfInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9		not-accessible	The table of OSPF Virtual Interface Information.
ipOspfVirtIntfInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1		not-accessible	Information about an OSPF virtual Interface.
I32 ipOspfVirtIntfInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.1	Integer32	read-only	The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related.
INT ipOspfVirtIntfInfoAreaId	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.2	INTEGER	read-only	The index of the OSPF area to which this virtual interface belongs.
IP ipOspfVirtIntfInfoNbr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.3	IpAddress	read-only	The IP Address of the OSPF neighbor for this virtual interface.
INT ipOspfVirtIntfInfoMdkey	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.4	INTEGER	read-only	The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
INT ipOspfVirtIntfInfoHello	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.5	INTEGER	read-only	Hello interval
INT ipOspfVirtIntfInfoDead	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.6	INTEGER	read-only	Dead interval
INT ipOspfVirtIntfInfoTrans	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.7	INTEGER	read-only	Transit delay
INT ipOspfVirtIntfInfoRetra	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.8	INTEGER	read-only	Retransmit interval
STR ipOspfVirtIntfInfoAuthKey	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.9	DisplayString	read-only	Authentication Key
INT ipOspfVirtIntfInfoStatus	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.10	INTEGER	read-only	Status disabled(0), enabled(1)
ipOspfHostInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.10		not-accessible	The table of OSPF Host Information.
ipOspfHostInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.10.1		not-accessible	Information about a OSPF host.
I32 ipOspfHostInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.10.1.1	Integer32	read-only	The OSPF host number for which the OSPF host table is related.
IP ipOspfHostInfoIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.10.1.2	IpAddress	read-only	The IP Address of the OSPF host.
I32 ipOspfHostInfoAreaIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.10.1.3	Integer32	read-only	The area index.
I32 ipOspfHostInfoCost	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.10.1.4	Integer32	read-only	The cost of the corresponding host.
INT ipOspfHostInfoState	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.10.1.5	INTEGER	read-only	Enable or disable an OSPF Host
ipOspfRedistributeInfo	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11
ipOspfRedistributeStaticInfo	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.1
INT ipOspfRedistributeStaticInfoMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.1.1	INTEGER	read-only	The metric to be assigned to static routes. A value of 0 indicates none.
INT ipOspfRedistributeStaticInfoMetricType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.1.2	INTEGER	read-only	The AS External metric type for static routes.
OCT ipOspfRedistributeStaticInfoOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.1.3	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
ipOspfRedistributeFixedInfo	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.2
INT ipOspfRedistributeFixedInfoMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.2.1	INTEGER	read-only	The export metric for fixed routes. A value of 0 indicates none
INT ipOspfRedistributeFixedInfoMetricType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.2.2	INTEGER	read-only	The AS External metric type for fixed routes.
OCT ipOspfRedistributeFixedInfoOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.2.3	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
ipOspfRedistributeRipInfo	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.3
INT ipOspfRedistributeRipInfoMetric	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.3.1	INTEGER	read-only	The export metric for RIP routes. A value of 0 indicates none
INT ipOspfRedistributeRipInfoMetricType	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.3.2	INTEGER	read-only	The AS External metric type for RIP routes.
OCT ipOspfRedistributeRipInfoOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.3.3	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
ipOspfMd5keyInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.12		not-accessible	The table of OSPF MD5 keys Information.
ipOspfMd5keyInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.12.1		not-accessible	Information about an OSPF MD keys table.
I32 ipOspfMd5keyInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.12.1.1	Integer32	read-only	The OSPF MD5 Key number for which the OSPF MdKey table is related.
STR ipOspfMd5keyInfoKey	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.12.1.2	DisplayString	read-only	The character string representing the MD5 Key.
layer3Oper	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.4
vrrpOper	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.4.1
vrrpOperVirtRtrTable	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.4.1.1		not-accessible	An entry in the table of virtual routers.
vrrpOperVirtRtrEntry	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.4.1.1.1		not-accessible	A row in the vrrpOperVirtRtrTable
I32 vrrpOperVirtRtrIndex	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.4.1.1.1.1	Integer32	read-only	The index for the VRRP virtual router.
INT vrrpOperVirtRtrBackup	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.4.1.1.1.2	INTEGER	read-write	When set to a value of 'backup(2)' it forces the specified master virtual router into backup mode. 'ok(1)' is returned when the object os read.
INT vrrpOperVirtRtrGroupBackup	1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.4.1.2	INTEGER	read-write	When set to a value of 'backup(2)' it forces the specified master virtual router group into backup mode. 'ok(1)' is returned when the object os read.

RFC description

Provides Layer 3 configuration, statistics and management for Hewlett Packard switch blade systems.

Start monitoring HP BladeSystem Type 2 embedded network switch modules with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BLADETYPE2-NETWORK-MIB