BDCOM-INTERFACES

All MIBs › BDCOM-INTERFACES

Category: Network Interfaces, Vendor: BDCOM

Description: Defines interface type registrations and supplementary interface objects for BDCOM networking equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BDCOM-INTERFACES?

BDCOM-INTERFACES is a BDCOM (Chinese networking-equipment vendor) proprietary MIB extending standard interface statistics with Cisco-IOS-style 'show interface' detail. Its interface table, keyed by ifIndex, records hardware type, line protocol state, last-input/output/output-hang times, input/output bits-per-second and packets-per-second, runts/giants/CRC/frame/overrun/ignored/abort input errors, reset/restart counts, keepalive setting, last-down reason, carrier transitions, reliability, and delay. As a performance/status MIB it lets an administrator diagnose an interface's error type and stability using familiar 'show interface'-style counters on a BDCOM device. It is deployed on BDCOM networking equipment. Engineers can download the BDCOM-INTERFACES file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BDCOM-INTERFACES. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

BDCOM networking equipment

Monitoring Examples

An administrator checks bdlocIfInCRC and bdlocIfCarTrans to diagnose a flapping or error-prone interface on a BDCOM device.

What Can Be Monitored

interface error counters and stability statistics

Imported Objects

From BDCOM-SMI

bdlocal

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter

From RFC1213-MIB

DisplayString
ifIndex

OIDs

OID symbolic	OID numeric	Type	Access	Description
bdlFSIPEntry	1.3.6.1.4.1.3320.2.2.2.1		not-accessible	A collection of objects specific to 4T, HSSI, Mx serial or FSIP.
bdlFSIPTable	1.3.6.1.4.1.3320.2.2.2		not-accessible	A list of card entries for 4T, HSSI, Mx serial or FSIP.
bdlifEntry	1.3.6.1.4.1.3320.2.2.1.1		not-accessible	A collection of additional objects in the BDCom interface.
bdlifTable	1.3.6.1.4.1.3320.2.2.1		not-accessible	A list of interface entries.
bdlinterfaces	1.3.6.1.4.1.3320.2.2
CTR bdlocIfapolloInOctets	1.3.6.1.4.1.3320.2.2.1.1.68	Counter	read-only	Apollo protocol input octet count
CTR bdlocIfapolloInPkts	1.3.6.1.4.1.3320.2.2.1.1.66	Counter	read-only	Apollo protocol input packet count
CTR bdlocIfapolloOutOctets	1.3.6.1.4.1.3320.2.2.1.1.69	Counter	read-only	Apollo protocol output octet count
CTR bdlocIfapolloOutPkts	1.3.6.1.4.1.3320.2.2.1.1.67	Counter	read-only	Apollo protocol output packet count
CTR bdlocIfappletalkInOctets	1.3.6.1.4.1.3320.2.2.1.1.60	Counter	read-only	Appletalk protocol input octet count
CTR bdlocIfappletalkInPkts	1.3.6.1.4.1.3320.2.2.1.1.58	Counter	read-only	Appletalk protocol input packet count
CTR bdlocIfappletalkOutOctets	1.3.6.1.4.1.3320.2.2.1.1.61	Counter	read-only	Appletalk protocol output octet count
CTR bdlocIfappletalkOutPkts	1.3.6.1.4.1.3320.2.2.1.1.59	Counter	read-only	Appletalk protocol output packet count
CTR bdlocIfarpInOctets	1.3.6.1.4.1.3320.2.2.1.1.108	Counter	read-only	Arp protocol input octet count
CTR bdlocIfarpInPkts	1.3.6.1.4.1.3320.2.2.1.1.106	Counter	read-only	Arp protocol input packet count
CTR bdlocIfarpOutOctets	1.3.6.1.4.1.3320.2.2.1.1.109	Counter	read-only	Arp protocol output octet count
CTR bdlocIfarpOutPkts	1.3.6.1.4.1.3320.2.2.1.1.107	Counter	read-only	Arp protocol output packet count
CTR bdlocIfbridgedInOctets	1.3.6.1.4.1.3320.2.2.1.1.76	Counter	read-only	Bridged protocol input octet count
CTR bdlocIfbridgedInPkts	1.3.6.1.4.1.3320.2.2.1.1.74	Counter	read-only	Bridged protocol input packet count
CTR bdlocIfbridgedOutOctets	1.3.6.1.4.1.3320.2.2.1.1.77	Counter	read-only	Bridged protocol output octet count
CTR bdlocIfbridgedOutPkts	1.3.6.1.4.1.3320.2.2.1.1.75	Counter	read-only	Bridged protocol output packet count
INT bdlocIfCarTrans	1.3.6.1.4.1.3320.2.2.1.1.21	INTEGER	read-only	Number of times interface saw the carrier signal transition.
CTR bdlocIfchaosInOctets	1.3.6.1.4.1.3320.2.2.1.1.84	Counter	read-only	Choas protocol input octet count
CTR bdlocIfchaosInPkts	1.3.6.1.4.1.3320.2.2.1.1.82	Counter	read-only	Choas protocol input packet count
CTR bdlocIfchaosOutOctets	1.3.6.1.4.1.3320.2.2.1.1.85	Counter	read-only	Choas protocol output octet count
CTR bdlocIfchaosOutPkts	1.3.6.1.4.1.3320.2.2.1.1.83	Counter	read-only	Choas protocol output packet count
CTR bdlocIfclnsInOctets	1.3.6.1.4.1.3320.2.2.1.1.56	Counter	read-only	CLNS protocol input byte count
CTR bdlocIfclnsInPkts	1.3.6.1.4.1.3320.2.2.1.1.54	Counter	read-only	CLNS protocol input packet count
CTR bdlocIfclnsOutOctets	1.3.6.1.4.1.3320.2.2.1.1.57	Counter	read-only	CLNS protocol output byte count
CTR bdlocIfclnsOutPkts	1.3.6.1.4.1.3320.2.2.1.1.55	Counter	read-only	CLNS protocol output packet count
INT bdlocIfCollisions	1.3.6.1.4.1.3320.2.2.1.1.25	INTEGER	read-only	The number of output collisions detected on this interface.
CTR bdlocIfdecnetInOctets	1.3.6.1.4.1.3320.2.2.1.1.48	Counter	read-only	Decnet protocol input byte count
CTR bdlocIfdecnetInPkts	1.3.6.1.4.1.3320.2.2.1.1.46	Counter	read-only	Decnet protocol input packet count
CTR bdlocIfdecnetOutOctets	1.3.6.1.4.1.3320.2.2.1.1.49	Counter	read-only	Decnet protocol output byte count
CTR bdlocIfdecnetOutPkts	1.3.6.1.4.1.3320.2.2.1.1.47	Counter	read-only	Decnet protocol output packet count
INT bdlocIfDelay	1.3.6.1.4.1.3320.2.2.1.1.23	INTEGER	read-only	The amount of delay in microseconds of the interface. Used by IGRP.
STR bdlocIfDescr	1.3.6.1.4.1.3320.2.2.1.1.28	DisplayString	read-write	User configurable interface description.
CTR bdlocIfDribbleInputs	1.3.6.1.4.1.3320.2.2.1.1.114	Counter	read-only	The number of good packets received with the dribble condition present
CTR bdlocIfFastInOctets	1.3.6.1.4.1.3320.2.2.1.1.36	Counter	read-only	Octet count for Inbound traffic routed with fast switching
CTR bdlocIfFastInPkts	1.3.6.1.4.1.3320.2.2.1.1.34	Counter	read-only	Packet count for Inbound traffic routed with fast switching
CTR bdlocIfFastOutOctets	1.3.6.1.4.1.3320.2.2.1.1.37	Counter	read-only	Octet count for Outbound traffic routed with fast switching
CTR bdlocIfFastOutPkts	1.3.6.1.4.1.3320.2.2.1.1.35	Counter	read-only	Packet count for Outbound traffic routed with fast switching
INT bdlocIfFSIPcts	1.3.6.1.4.1.3320.2.2.2.1.4	INTEGER	read-only	Is the CTS signal up or down
INT bdlocIfFSIPdcd	1.3.6.1.4.1.3320.2.2.2.1.6	INTEGER	read-only	Is the DCD signal up or down
INT bdlocIfFSIPdsr	1.3.6.1.4.1.3320.2.2.2.1.7	INTEGER	read-only	Is the DSR signal up or down
INT bdlocIfFSIPdtr	1.3.6.1.4.1.3320.2.2.2.1.5	INTEGER	read-only	Is the DTR signal up or down
INT bdlocIfFSIPIndex	1.3.6.1.4.1.3320.2.2.2.1.1	INTEGER	read-only	Interface index of this card corresponding to its ifIndex
INT bdlocIfFSIPportType	1.3.6.1.4.1.3320.2.2.2.1.10	INTEGER	read-only	Cable Type of 4T, HSSI, Mx serial or FSIP
INT bdlocIfFSIPrts	1.3.6.1.4.1.3320.2.2.2.1.3	INTEGER	read-only	Is the RTS signal up or down
INT bdlocIfFSIPrxClockrate	1.3.6.1.4.1.3320.2.2.2.1.8	INTEGER	read-only	Received clock rate
INT bdlocIfFSIPrxClockrateHi	1.3.6.1.4.1.3320.2.2.2.1.9	INTEGER	read-only	Use when received clock rate is greater than 2^32 (gigabits).
INT bdlocIfFSIPtype	1.3.6.1.4.1.3320.2.2.2.1.2	INTEGER	read-only	Is this FSIP line DCE or DTE
STR bdlocIfHardType	1.3.6.1.4.1.3320.2.2.1.1.1	DisplayString	read-only	Returns the type of interface.
INT bdlocIfInAbort	1.3.6.1.4.1.3320.2.2.1.1.16	INTEGER	read-only	Number of input packets which were aborted.
INT bdlocIfInBitsSec	1.3.6.1.4.1.3320.2.2.1.1.6	INTEGER	read-only	Five minute exponentially-decayed moving average of input bits per second.
INT bdlocIfInCRC	1.3.6.1.4.1.3320.2.2.1.1.12	INTEGER	read-only	Number of input packets which had cyclic redundancy checksum errors.
INT bdlocIfInFrame	1.3.6.1.4.1.3320.2.2.1.1.13	INTEGER	read-only	Number of input packet which were misaligned.
INT bdlocIfInGiants	1.3.6.1.4.1.3320.2.2.1.1.11	INTEGER	read-only	Number of input packets which were larger then the physical media permitted.
INT bdlocIfInIgnored	1.3.6.1.4.1.3320.2.2.1.1.15	INTEGER	read-only	Number of input packets which were simply ignored by this interface.
INT bdlocIfInOverrun	1.3.6.1.4.1.3320.2.2.1.1.14	INTEGER	read-only	Count of input which arrived too quickly for the to hardware receive.
INT bdlocIfInPktsSec	1.3.6.1.4.1.3320.2.2.1.1.7	INTEGER	read-only	Five minute exponentially-decayed moving average of input packets per second.
INT bdlocIfInputQueueDrops	1.3.6.1.4.1.3320.2.2.1.1.26	INTEGER	read-only	The number of packets dropped because the input queue was full.
INT bdlocIfInRunts	1.3.6.1.4.1.3320.2.2.1.1.10	INTEGER	read-only	Number of packets input which were smaller then the allowable physical media permitted.
CTR bdlocIfipInOctets	1.3.6.1.4.1.3320.2.2.1.1.44	Counter	read-only	ip protocol input octet count
CTR bdlocIfipInPkts	1.3.6.1.4.1.3320.2.2.1.1.42	Counter	read-only	ip protocol input packet count
CTR bdlocIfipOutOctets	1.3.6.1.4.1.3320.2.2.1.1.45	Counter	read-only	ip protocol output octet count
CTR bdlocIfipOutPkts	1.3.6.1.4.1.3320.2.2.1.1.43	Counter	read-only	ip protocol output packet count
INT bdlocIfKeep	1.3.6.1.4.1.3320.2.2.1.1.19	INTEGER	read-only	Boolean whether keepalives are enabled on this interface.
CTR bdlocIflanmanInOctets	1.3.6.1.4.1.3320.2.2.1.1.96	Counter	read-only	LanMan protocol input octet count
CTR bdlocIflanmanInPkts	1.3.6.1.4.1.3320.2.2.1.1.94	Counter	read-only	LanMan protocol input packet count
CTR bdlocIflanmanOutOctets	1.3.6.1.4.1.3320.2.2.1.1.97	Counter	read-only	LanMan protocol output octet count
CTR bdlocIflanmanOutPkts	1.3.6.1.4.1.3320.2.2.1.1.95	Counter	read-only	LanMan protocol output packet count
INT bdlocIfLastIn	1.3.6.1.4.1.3320.2.2.1.1.3	INTEGER	read-only	Elapsed time in milliseconds since last line protocol input packet was received.
INT bdlocIfLastOut	1.3.6.1.4.1.3320.2.2.1.1.4	INTEGER	read-only	Elapsed time in milliseconds since last line protocol output packet was transmitted.
INT bdlocIfLastOutHang	1.3.6.1.4.1.3320.2.2.1.1.5	INTEGER	read-only	Elapsed time in milliseconds since last line protocol output packet could not be successfully transmitted.
INT bdlocIfLineProt	1.3.6.1.4.1.3320.2.2.1.1.2	INTEGER	read-only	Boolean whether interface line protocol is up or not.
INT bdlocIfLoad	1.3.6.1.4.1.3320.2.2.1.1.24	INTEGER	read-only	The loading factor of the interface. Used by IGRP.
CTR bdlocIfmopInOctets	1.3.6.1.4.1.3320.2.2.1.1.92	Counter	read-only	MOP protocol input octet count
CTR bdlocIfmopInPkts	1.3.6.1.4.1.3320.2.2.1.1.90	Counter	read-only	MOP protocol input packet count
CTR bdlocIfmopOutOctets	1.3.6.1.4.1.3320.2.2.1.1.93	Counter	read-only	MOP protocol output octet count
CTR bdlocIfmopOutPkts	1.3.6.1.4.1.3320.2.2.1.1.91	Counter	read-only	MOP protocol output packet count
CTR bdlocIfnovellInOctets	1.3.6.1.4.1.3320.2.2.1.1.64	Counter	read-only	Novell protocol input octet count
CTR bdlocIfnovellInPkts	1.3.6.1.4.1.3320.2.2.1.1.62	Counter	read-only	Novell protocol input packet count
CTR bdlocIfnovellOutOctets	1.3.6.1.4.1.3320.2.2.1.1.65	Counter	read-only	Novell protocol output octet count
CTR bdlocIfnovellOutPkts	1.3.6.1.4.1.3320.2.2.1.1.63	Counter	read-only	Novell protocol output packet count
CTR bdlocIfotherInOctets	1.3.6.1.4.1.3320.2.2.1.1.40	Counter	read-only	Other protocol input octet count
CTR bdlocIfotherInPkts	1.3.6.1.4.1.3320.2.2.1.1.38	Counter	read-only	Other protocol input packet count
CTR bdlocIfotherOutOctets	1.3.6.1.4.1.3320.2.2.1.1.41	Counter	read-only	Other protocol output octet count
CTR bdlocIfotherOutPkts	1.3.6.1.4.1.3320.2.2.1.1.39	Counter	read-only	Other protocol output packet count
INT bdlocIfOutBitsSec	1.3.6.1.4.1.3320.2.2.1.1.8	INTEGER	read-only	Five minute exponentially-decayed moving average of output bits per second.
INT bdlocIfOutPktsSec	1.3.6.1.4.1.3320.2.2.1.1.9	INTEGER	read-only	Five minute exponentially-decayed moving average of output packets per second.
INT bdlocIfOutputQueueDrops	1.3.6.1.4.1.3320.2.2.1.1.27	INTEGER	read-only	The number of packets dropped because the output queue was full.
CTR bdlocIfprobeInOctets	1.3.6.1.4.1.3320.2.2.1.1.112	Counter	read-only	Probe protocol input octet count
CTR bdlocIfprobeInPkts	1.3.6.1.4.1.3320.2.2.1.1.110	Counter	read-only	Probe protocol input packet count
CTR bdlocIfprobeOutOctets	1.3.6.1.4.1.3320.2.2.1.1.113	Counter	read-only	Probe protocol output octet count
CTR bdlocIfprobeOutPkts	1.3.6.1.4.1.3320.2.2.1.1.111	Counter	read-only	Probe protocol output packet count
CTR bdlocIfpupInOctets	1.3.6.1.4.1.3320.2.2.1.1.88	Counter	read-only	PUP protocol input octet count
CTR bdlocIfpupInPkts	1.3.6.1.4.1.3320.2.2.1.1.86	Counter	read-only	PUP protocol input packet count
CTR bdlocIfpupOutOctets	1.3.6.1.4.1.3320.2.2.1.1.89	Counter	read-only	PUP protocol output octet count
CTR bdlocIfpupOutPkts	1.3.6.1.4.1.3320.2.2.1.1.87	Counter	read-only	PUP protocol output packet count
STR bdlocIfReason	1.3.6.1.4.1.3320.2.2.1.1.20	DisplayString	read-only	Reason for interface last status change.
INT bdlocIfReliab	1.3.6.1.4.1.3320.2.2.1.1.22	INTEGER	read-only	The reliability of the interface. Used by IGRP.
INT bdlocIfResets	1.3.6.1.4.1.3320.2.2.1.1.17	INTEGER	read-only	Number of times the interface internally reset.
INT bdlocIfRestarts	1.3.6.1.4.1.3320.2.2.1.1.18	INTEGER	read-only	Number of times interface needed to be completely restarted.
CTR bdlocIfSlowInOctets	1.3.6.1.4.1.3320.2.2.1.1.32	Counter	read-only	Octet count for Inbound traffic routed with slow switching
CTR bdlocIfSlowInPkts	1.3.6.1.4.1.3320.2.2.1.1.30	Counter	read-only	Packet count for Inbound traffic routed with slow switching
CTR bdlocIfSlowOutOctets	1.3.6.1.4.1.3320.2.2.1.1.33	Counter	read-only	Octet count for Outbound traffic routed with slow switching
CTR bdlocIfSlowOutPkts	1.3.6.1.4.1.3320.2.2.1.1.31	Counter	read-only	Packet count for Outbound traffic routed with slow switching
CTR bdlocIfspanInOctets	1.3.6.1.4.1.3320.2.2.1.1.104	Counter	read-only	Spanning tree input octet packet count
CTR bdlocIfspanInPkts	1.3.6.1.4.1.3320.2.2.1.1.102	Counter	read-only	Spanning tree input protocol packet count
CTR bdlocIfspanOutOctets	1.3.6.1.4.1.3320.2.2.1.1.105	Counter	read-only	Spanning tree output octet packet count
CTR bdlocIfspanOutPkts	1.3.6.1.4.1.3320.2.2.1.1.103	Counter	read-only	Spanning tree output protocol packet count
CTR bdlocIfsrbInOctets	1.3.6.1.4.1.3320.2.2.1.1.80	Counter	read-only	SRB protocol input octet count
CTR bdlocIfsrbInPkts	1.3.6.1.4.1.3320.2.2.1.1.78	Counter	read-only	SRB protocol input packet count
CTR bdlocIfsrbOutOctets	1.3.6.1.4.1.3320.2.2.1.1.81	Counter	read-only	SRB protocol output octet count
CTR bdlocIfsrbOutPkts	1.3.6.1.4.1.3320.2.2.1.1.79	Counter	read-only	SRB protocol output packet count
CTR bdlocIfstunInOctets	1.3.6.1.4.1.3320.2.2.1.1.100	Counter	read-only	STUN protocol input octet count
CTR bdlocIfstunInPkts	1.3.6.1.4.1.3320.2.2.1.1.98	Counter	read-only	STUN protocol input packet count
CTR bdlocIfstunOutOctets	1.3.6.1.4.1.3320.2.2.1.1.101	Counter	read-only	STUN protocol output octet count
CTR bdlocIfstunOutPkts	1.3.6.1.4.1.3320.2.2.1.1.99	Counter	read-only	STUN protocol output packet count
CTR bdlocIfvinesInOctets	1.3.6.1.4.1.3320.2.2.1.1.72	Counter	read-only	Vines protocol input octet count
CTR bdlocIfvinesInPkts	1.3.6.1.4.1.3320.2.2.1.1.70	Counter	read-only	Vines protocol input packet count
CTR bdlocIfvinesOutOctets	1.3.6.1.4.1.3320.2.2.1.1.73	Counter	read-only	Vines protocol output octet count
CTR bdlocIfvinesOutPkts	1.3.6.1.4.1.3320.2.2.1.1.71	Counter	read-only	Vines protocol output packet count
CTR bdlocIfxnsInOctets	1.3.6.1.4.1.3320.2.2.1.1.52	Counter	read-only	XNS protocol input byte count
CTR bdlocIfxnsInPkts	1.3.6.1.4.1.3320.2.2.1.1.50	Counter	read-only	XNS protocol input packet count
CTR bdlocIfxnsOutOctets	1.3.6.1.4.1.3320.2.2.1.1.53	Counter	read-only	XNS protocol output byte count
CTR bdlocIfxnsOutPkts	1.3.6.1.4.1.3320.2.2.1.1.51	Counter	read-only	XNS protocol output packet count

RFC description

Provides additional interface statistics and monitoring for BDCOM network devices including traffic and error counters.

Start monitoring BDCOM networking equipment (switches/routers) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BDCOM-INTERFACES

What Is BDCOM-INTERFACES?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description