All MIBs › CISCO-ATM-VIRTUAL-IF-MIB
Organization: Cisco Systems, Inc.
Last Updated: 2002-10-11
Category: ATM, Network Interfaces
Description: Manages virtual ATM interfaces and subinterface parameters on Cisco ATM devices.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CISCO-ATM-VIRTUAL-IF-MIB?
CISCO-ATM-VIRTUAL-IF-MIB is a Cisco vendor-specific MIB (under CISCO-SMI/ciscoMgmt) that manages ATM virtual interfaces layered on top of Cisco physical ATM interfaces. Its central caviTable uses RowStatus-driven create/delete semantics (createAndGo) to provision virtual interfaces of type uni or nni, with each created entry producing a corresponding ifTable row of ifType atmVirtual(149); companion tables caviStatEgressTable/caviStatIngressTable and caviEgressIntervalTable/caviIngressIntervalTable then track cumulative and interval-based traffic statistics for those virtual interfaces. It depends on IF-MIB for ifIndex/InterfaceIndex linkage and on ATM-TC-MIB for the AtmVpIdentifier textual convention, tying virtual-interface objects into the standard interface and ATM data models. This makes it useful both for provisioning ATM sub-interfaces remotely and for monitoring their traffic once created, since virtual interfaces don't otherwise appear distinctly in a purely physical-interface view. It is deployed on Cisco IOS routers and ATM switches offering multiple virtual ATM interfaces per physical port, and the CISCO-ATM-VIRTUAL-IF-MIB MIB is the module engineers load to manage this feature.
IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-ATM-VIRTUAL-IF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco ATM-capable routers/switches (Cisco IOS ATM WAN platforms)
Monitoring Examples
An operator polls caviStatEgressTable and caviStatIngressTable for a provisioned virtual ATM interface's ifIndex; a sudden drop in ingress cell/frame counts while the corresponding caviTable row status remains active would suggest the ATM virtual circuit has stopped receiving traffic despite still being administratively provisioned.
What Can Be Monitored
- virtual ATM interface creation/row status (caviTable)
- per-VC egress/ingress interval statistics
- egress/ingress cumulative statistics counters
- ATM virtual interface type (UNI/NNI) configuration
- ifTable linkage for atmVirtual interfaces
This MIB depends on
Related MIBs
Imported Objects
From ATM-TC-MIB
| AtmVpIdentifier |
From CISCO-SMI
| ciscoMgmt | OBJECT-IDENTITY |
From IF-MIB
| InterfaceIndex | |
| ifIndex | OBJECT-TYPE |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus |
How to Use in IPNetwork Monitor
Example using caviEgrRcvClp0Cells OID:
Select a Cisco ATM-capable routers/switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type caviEgrRcvClp0Cells into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of CLP-0 cells received from switch at the traffic management and policing device. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| caviConfig | 1.3.6.1.4.1.9.9.129.1.1 | |||
| C32 caviEgrClp0DiscCells | 1.3.6.1.4.1.9.9.129.1.2.1.1.3 | Counter32 | read-only | The number of CLP-0 cells discarded due to policing. |
| C32 caviEgrClp1DiscCells | 1.3.6.1.4.1.9.9.129.1.2.1.1.4 | Counter32 | read-only | The number of CLP-1 cells discarded due to policing. |
| caviEgressHighSpeedStatMIBGroup | 1.3.6.1.4.1.9.9.129.3.2.3 | These statistics apply to ingress ATM virtual interfaces with speed of OC12 or higher. | ||
| caviEgressHighSpeedStatMIBGroup1 | 1.3.6.1.4.1.9.9.129.3.2.9 | These statistics apply to ingress ATM virtual interfaces with speed of OC12 or higher. | ||
| caviEgressIntervalEntry | 1.3.6.1.4.1.9.9.129.1.2.2.1 | not-accessible | An entry for egress ATM virtual interface interval statistics. In addition to the current 15-minute interval bucket, the previous 24 hours worth of 15-minute interval buckets are collected for each ATM virtual interface. Statistics are being collected before and after the traffic management and policing device, in egress direction. | |
| caviEgressIntervalMIBGroup | 1.3.6.1.4.1.9.9.129.3.2.4 | These are objects related to the ATM virtual interface interval statistics group. | ||
| caviEgressIntervalMIBGroup1 | 1.3.6.1.4.1.9.9.129.3.2.10 | These are objects related to the ATM virtual interface interval statistics group. | ||
| U32 caviEgressIntervalNumber | 1.3.6.1.4.1.9.9.129.1.2.2.1.1 | Unsigned32 | read-only | A number used to uniquely identify a ATM virtual interface's interval statistics. 0 is used to identify the current 15-minute interval. 1-96 identify the previous 24 hours of 15-minute interval buckets. |
| caviEgressIntervalTable | 1.3.6.1.4.1.9.9.129.1.2.2 | not-accessible | This table reflects interval statistics associated with each of the ATM virtual interfaces in egress direction. | |
| caviEgressStatMIBGroup | 1.3.6.1.4.1.9.9.129.3.2.2 | These are objects related to the ATM virtual interface statistics group caviStatistics. | ||
| caviEgressStatMIBGroup1 | 1.3.6.1.4.1.9.9.129.3.2.8 | These are objects related to the ATM virtual interface statistics group caviStatistics. | ||
| C32 caviEgrRcvClp0CellsEx | 1.3.6.1.4.1.9.9.129.1.2.1.1.1 | Counter32 | read-only | The number of CLP-0 cells received from switch at the traffic management and policing device. |
| C32 caviEgrRcvClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.1.1.2 | Counter32 | read-only | The number of CLP-1 cells received from switch at the traffic management and policing device. |
| C32 caviEgrRcvEFCICells | 1.3.6.1.4.1.9.9.129.1.2.1.1.10 | Counter32 | read-only | The number of EFCI cells received from the switch at traffic management and policing device. |
| C32 caviEgrRcvOAMCells | 1.3.6.1.4.1.9.9.129.1.2.1.1.7 | Counter32 | read-only | The number of OAM cells received from the switch at the traffic management and policing device. |
| C32 caviEgrRMCells | 1.3.6.1.4.1.9.9.129.1.2.1.1.8 | Counter32 | read-only | The number of RM cells transmitted to the network from the switch. |
| C32 caviEgrXmtClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.1.1.5 | Counter32 | read-only | The number of CLP-0 cells transmitted to the network after traffic management and policing. |
| C32 caviEgrXmtClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.1.1.6 | Counter32 | read-only | The number of CLP-1 cells transmitted to the network after traffic management and policing. |
| C32 caviEgrXmtEFCICells | 1.3.6.1.4.1.9.9.129.1.2.1.1.9 | Counter32 | read-only | The number of EFCI cells transmitted to the network after traffic management and policing. |
| C32 caviEgrXmtOAMCells | 1.3.6.1.4.1.9.9.129.1.2.1.1.11 | Counter32 | read-only | The number of OAM loopback cells transmitted to network after traffic management and policing. |
| caviEntry | 1.3.6.1.4.1.9.9.129.1.1.1.1 | not-accessible | An entry in the caviTable table for each ATM virtual interface. An entry in this table can only be created if values for all objects in a row are provided. The caviVpiNum object is applicable only to interfaces of caviIfType vnni (3) or vuni (4). The caviMinVpiNum and caviMaxVpiNum are applicable only to interfaces of caviIfType evuni(5) or evnni(6). | |
| U32 caviFileId | 1.3.6.1.4.1.9.9.129.1.1.1.1.6 | Unsigned32 | read-create | The ID of the file that holds module specific configuration parameters for this ATM virtual interface. |
| C64 caviHEgrClp0DiscCells | 1.3.6.1.4.1.9.9.129.1.2.1.1.22 | Counter64 | read-only | The 64 bit version of the number of CLP-0 cells discarded due to policing. |
| C64 caviHEgrClp1DiscCells | 1.3.6.1.4.1.9.9.129.1.2.1.1.23 | Counter64 | read-only | The 64 bit version of the number of CLP-1 cells discarded due to policing. |
| C64 caviHEgrRcvClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.1.1.20 | Counter64 | read-only | The 64 bit version of the number of CLP-0 cells received from switch at the traffic management and policing device. |
| C64 caviHEgrRcvClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.1.1.21 | Counter64 | read-only | The 64 bit version of the number of CLP-1 cells received from switch at the traffic management and policing device. |
| C64 caviHEgrXmtClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.1.1.12 | Counter64 | read-only | The 64-bit version of caviEgrXmtClp0Cells. |
| C64 caviHEgrXmtClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.1.1.13 | Counter64 | read-only | The 64-bit version of caviEgrXmtClp1Cells. |
| C32 caviHighEgrClp0DiscCells | 1.3.6.1.4.1.9.9.129.1.2.1.1.16 | Counter32 | read-only | The Upper 32 bit of the number of CLP-0 cells discarded due to policing. |
| C32 caviHighEgrClp1DiscCells | 1.3.6.1.4.1.9.9.129.1.2.1.1.17 | Counter32 | read-only | The Upper 32 bit of the number of CLP-1 cells discarded due to policing. |
| C32 caviHighEgrRcvClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.1.1.14 | Counter32 | read-only | The Upper 32 bit of the number of CLP-0 cells received from switch at the traffic management and policing device. |
| C32 caviHighEgrRcvClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.1.1.15 | Counter32 | read-only | The Upper 32 bit of the number of CLP-1 cells received from switch at the traffic management and policing device. |
| C32 caviHighEgrXmtClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.1.1.18 | Counter32 | read-only | The Upper 32 bit of the number of CLP-0 cells transmitted to the network after traffic management and policing. |
| C32 caviHighEgrXmtClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.1.1.19 | Counter32 | read-only | The Upper 32 bit of the number of CLP-1 cells transmitted to the network after traffic management and policing. |
| C32 caviHighIngClp0DiscCells | 1.3.6.1.4.1.9.9.129.1.2.3.1.16 | Counter32 | read-only | The upper 32 bits of the number of CLP-0 cells discarded due to policing in ingress direction. |
| C32 caviHighIngClp1DiscCells | 1.3.6.1.4.1.9.9.129.1.2.3.1.17 | Counter32 | read-only | The upper 32 bits of the number of CLP-1 cells discarded due to policing in ingress direction. |
| C32 caviHighIngRcvClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.3.1.14 | Counter32 | read-only | The upper 32 bits of the number of CLP-0 cells received from network at the traffic management and policing device in ingress direction. |
| C32 caviHighIngRcvClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.3.1.15 | Counter32 | read-only | The upper 32 bits of the number of CLP-1 cells received from network at the traffic management and policing device in ingress direction. |
| C32 caviHighIngXmtClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.3.1.18 | Counter32 | read-only | The upper 32 bits of the number of CLP-0 cells transmitted to the switch after traffic management and policing in ingress direction. |
| C32 caviHighIngXmtClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.3.1.19 | Counter32 | read-only | The upper 32 bits of the number of CLP-1 cells transmitted to the switch after traffic management and policing in ingress direction. |
| C32 caviHighIntEgrClp0DiscCells | 1.3.6.1.4.1.9.9.129.1.2.2.1.15 | Counter32 | read-only | The upper 32 bits of the number of CLP-0 cells discarded due to policing during a 15 minute interval. |
| C32 caviHighIntEgrClp1DiscCells | 1.3.6.1.4.1.9.9.129.1.2.2.1.16 | Counter32 | read-only | The upper 32 bits of the number of CLP-1 cells discarded due to policing during a 15 minute interval. |
| C32 caviHighIntEgrRcvClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.2.1.13 | Counter32 | read-only | The upper 32 bits of the number of CLP-0 cells received from switch at the traffic management and policing device during a 15 minute interval. |
| C32 caviHighIntEgrRcvClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.2.1.14 | Counter32 | read-only | The upper 32 bits of the number of CLP-1 cells received from switch at the traffic management and policing device during a 15 minute interval. |
| C32 caviHighIntEgrXmtClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.2.1.17 | Counter32 | read-only | The upper 32 bits of the number of CLP-0 cells transmitted to the network after traffic management and policing during a 15 minute interval. |
| C32 caviHighIntEgrXmtClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.2.1.18 | Counter32 | read-only | The upper 32 bits of the number of CLP-1 cells transmitted to the network after traffic management and policing during a 15 minute interval. |
| C32 caviHighIntIngClp0DiscCells | 1.3.6.1.4.1.9.9.129.1.2.4.1.15 | Counter32 | read-only | The upper 32 bits of the number of CLP-0 cells discarded due to policing in ingress direction, during a 15-minute interval. |
| C32 caviHighIntIngClp1DiscCells | 1.3.6.1.4.1.9.9.129.1.2.4.1.16 | Counter32 | read-only | The upper 32 bits of the number of CLP-1 cells discarded due to policing in ingress direction, during a 15-minute interval. |
| C32 caviHighIntIngRcvClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.4.1.13 | Counter32 | read-only | The upper 32 bits of the number of CLP-0 cells received from network at the traffic management and policing device in ingress direction, during a 15-minute interval. |
| C32 caviHighIntIngRcvClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.4.1.14 | Counter32 | read-only | The upper 32 bits of the number of CLP-1 cells received from network at the traffic management and policing device in ingress direction, during a 15-minute interval. |
| C32 caviHighIntIngXmtClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.4.1.17 | Counter32 | read-only | The upper 32 bits of the number of CLP-0 cells transmitted to the switch after traffic management and policing in ingress direction, during a 15-minute interval. |
| C32 caviHighIntIngXmtClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.4.1.18 | Counter32 | read-only | The upper 32 bits of the number of CLP-1 cells transmitted to the switch after traffic management and policing in ingress direction, during a 15-minute interval. |
| C64 caviHIngClp0DiscCells | 1.3.6.1.4.1.9.9.129.1.2.3.1.20 | Counter64 | read-only | The 64 bit version of the number of CLP-0 cells discarded due to policing in ingress direction. |
| C64 caviHIngClp1DiscCells | 1.3.6.1.4.1.9.9.129.1.2.3.1.21 | Counter64 | read-only | The 64 bit version of the number of CLP-1 cells discarded due to policing in ingress direction. |
| C64 caviHIngRcvClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.3.1.12 | Counter64 | read-only | The 64-bit version of caviIngRcvClp0Cells in ingress direction. |
| C64 caviHIngRcvClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.3.1.13 | Counter64 | read-only | The 64-bit version of caviIngRcvClp1Cells in ingress direction. |
| C64 caviHIngXmtClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.3.1.22 | Counter64 | read-only | The 64 bit version of the number of CLP-0 cells transmitted to the switch after traffic management and policing in ingress direction. |
| C64 caviHIngXmtClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.3.1.23 | Counter64 | read-only | The 64 bit version of the number of CLP-1 cells transmitted to the switch after traffic management and policing in ingress direction. |
| C64 caviHIntEgrClp0DiscCells | 1.3.6.1.4.1.9.9.129.1.2.2.1.21 | Counter64 | read-only | The 64 bit version of the number of CLP-0 cells discarded due to policing during a 15 minute interval. |
| C64 caviHIntEgrClp1DiscCells | 1.3.6.1.4.1.9.9.129.1.2.2.1.22 | Counter64 | read-only | The 64 bit version of the number of CLP-1 cells discarded due to policing during a 15 minute interval. |
| C64 caviHIntEgrRcvClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.2.1.19 | Counter64 | read-only | The 64 bit version of the number of CLP-0 cells received from switch at the traffic management and policing device during a 15 minute interval. |
| C64 caviHIntEgrRcvClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.2.1.20 | Counter64 | read-only | The 64 bit version of the number of CLP-1 cells received from switch at the traffic management and policing device during a 15 minute interval. |
| C64 caviHIntEgrXmtClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.2.1.23 | Counter64 | read-only | The 64 bit version of the number of CLP-0 cells transmitted to the network after traffic management and policing during a 15 minute interval. |
| C64 caviHIntEgrXmtClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.2.1.24 | Counter64 | read-only | The 64 bit version of the number of CLP-1 cells transmitted to the network after traffic management and policing during a 15 minute interval. |
| C64 caviHIntIngClp0DiscCells | 1.3.6.1.4.1.9.9.129.1.2.4.1.21 | Counter64 | read-only | The 64 bit version of the number of CLP-0 cells discarded due to policing in ingress direction, during a 15-minute interval. |
| C64 caviHIntIngClp1DiscCells | 1.3.6.1.4.1.9.9.129.1.2.4.1.22 | Counter64 | read-only | The 64 bit version of the number of CLP-1 cells discarded due to policing in ingress direction, during a 15-minute interval. |
| C64 caviHIntIngRcvClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.4.1.19 | Counter64 | read-only | The 64-bit version of the number of CLP-0 cells received from network at the traffic management and policing device in ingress direction, during a 15-minute interval. |
| C64 caviHIntIngRcvClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.4.1.20 | Counter64 | read-only | The 64-bit version of the number of CLP-1 cells received from network at the traffic management and policing device in ingress direction, during a 15-minute interval. |
| C64 caviHIntIngXmtClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.4.1.23 | Counter64 | read-only | The 64 bit version of the number of CLP-0 cells transmitted to the switch after traffic management and policing in ingress direction, during a 15-minute interval. |
| C64 caviHIntIngXmtClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.4.1.24 | Counter64 | read-only | The 64 bit version of the number of CLP-1 cells transmitted to the switch after traffic management and policing in ingress direction, during a 15-minute interval. |
| INT caviIfType | 1.3.6.1.4.1.9.9.129.1.1.1.1.7 | INTEGER | read-create | This object reflects the type of ATM virtual interface that can be configured within a physical interface. The supported types of virtual interfaces and their description is shown below: uni : Only one virtual interface of uni type can be configured within a physical interface. The ATM cells used in this interface would use a 8 bit VPI and a 4 bit GFC. nni : Only one virtual interface of nni type can be configured within a physical interface.The ATM cells used in this interface would use a 12 bit VPI. vnni: Multiple virtual interfaces of vnni type can be configured within a physical interface. However, all cells sent on this interface belong to a single VPI (defined by caviVpiNum) and the cells use a 12 bit VPI. vuni: Multiple virtual interfaces of vuni type can be configured within a physical interface. However, all cells sent on this interface belong to a single VPI (defined by caviVpiNum) and the cells use a 8 bit VPI and a 4 bit GFC. evuni: Multiple virtual interfaces of evuni type can be configured within a physical interface. However, all cells sent on this interface belong to a range of VPI (defined by caviMinVpiNum & caviMaxVpiNum) and the cells use a 8 bit VPI and a 4 bit GFC. evnni: Multiple virtual interfaces of evuni type can be configured within a physical interface. However, all cells sent on this interface belong to a range of VPI (defined by caviMinVpiNum & caviMaxVpiNum) and the cells use a 12 bit VPI. |
| I32 caviIndex | 1.3.6.1.4.1.9.9.129.1.1.1.1.1 | Integer32 | not-accessible | A unique value for the ATM virtual interface. |
| C32 caviIngClp0DiscCells | 1.3.6.1.4.1.9.9.129.1.2.3.1.3 | Counter32 | read-only | The number of CLP-0 cells discarded due to policing in ingress direction. |
| C32 caviIngClp1DiscCells | 1.3.6.1.4.1.9.9.129.1.2.3.1.4 | Counter32 | read-only | The number of CLP-1 cells discarded due to policing in ingress direction. |
| caviIngHighSpeedStatMIBGroup1 | 1.3.6.1.4.1.9.9.129.3.2.12 | These statistics apply to ingress ATM virtual interfaces with speed of OC12 or higher. | ||
| caviIngHighSpeedStatMIBGroup2 | 1.3.6.1.4.1.9.9.129.3.2.14 | These statistics apply to ingress ATM virtual interfaces with speed of OC12 or higher. | ||
| C32 caviIngRcvClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.3.1.1 | Counter32 | read-only | The number of CLP-0 cells received from network at the traffic management and policing device in ingress direction. |
| C32 caviIngRcvClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.3.1.2 | Counter32 | read-only | The number of CLP-1 cells received from network at the traffic management and policing device in ingress direction. |
| C32 caviIngRcvEFCICells | 1.3.6.1.4.1.9.9.129.1.2.3.1.10 | Counter32 | read-only | The number of EFCI cells received from the network at traffic management and policing device in ingress direction. |
| C32 caviIngRcvOAMCells | 1.3.6.1.4.1.9.9.129.1.2.3.1.7 | Counter32 | read-only | The number of OAM cells received from the network at the traffic management and policing device in ingress direction. |
| caviIngressHighSpeedStatMIBGroup | 1.3.6.1.4.1.9.9.129.3.2.6 | These statistics apply to ingress ATM virtual interfaces with speed of OC12 or higher. | ||
| caviIngressIntervalEntry | 1.3.6.1.4.1.9.9.129.1.2.4.1 | not-accessible | An entry for ingress ATM virtual interface interval statistics. In addition to the current 15-minute interval bucket, the previous 24 hours worth of 15-minute interval buckets are collected for each ATM virtual interface. Statistics are being collected before and after the traffic management and policing device, in ingress direction. | |
| U32 caviIngressIntervalNumber | 1.3.6.1.4.1.9.9.129.1.2.4.1.1 | Unsigned32 | not-accessible | A number used to uniquely identify a ATM virtual interface's interval statistics. 0 is used to identify the current 15-minute interval, which is currently being updated. 1-96 identify the previous 24 hours of 15-minute interval buckets, where interval 1 representing the most recent 15-minute interval and interval 96 representing the least recent 15-minute interval |
| caviIngressIntervalStatMIBGroup | 1.3.6.1.4.1.9.9.129.3.2.13 | These are objects related to the ingress ATM virtual interface statistics. | ||
| caviIngressIntervalTable | 1.3.6.1.4.1.9.9.129.1.2.4 | not-accessible | This table reflects interval statistics associated with each of the ATM virtual interfaces on the ingress side. | |
| caviIngressStatMIBGroup | 1.3.6.1.4.1.9.9.129.3.2.5 | These are objects related to the ingress ATM virtual interface statistics. | ||
| caviIngressStatMIBGroup1 | 1.3.6.1.4.1.9.9.129.3.2.11 | These are objects related to the ingress ATM virtual interface statistics. | ||
| C32 caviIngRMCells | 1.3.6.1.4.1.9.9.129.1.2.3.1.8 | Counter32 | read-only | The number of RM cells transmitted to the switch from the network in ingress direction. |
| C32 caviIngXmtClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.3.1.5 | Counter32 | read-only | The number of CLP-0 cells transmitted to the switch after traffic management and policing in ingress direction. |
| C32 caviIngXmtClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.3.1.6 | Counter32 | read-only | The number of CLP-1 cells transmitted to the switch after traffic management and policing in ingress direction. |
| C32 caviIngXmtEFCICells | 1.3.6.1.4.1.9.9.129.1.2.3.1.9 | Counter32 | read-only | The number of EFCI cells transmitted to the switch after traffic management and policing in ingress direction. |
| C32 caviIngXmtOAMCells | 1.3.6.1.4.1.9.9.129.1.2.3.1.11 | Counter32 | read-only | The number of OAM loopback cells transmitted to switch after traffic management and policing in ingress direction. |
| C32 caviIntEgrClp0DiscCells | 1.3.6.1.4.1.9.9.129.1.2.2.1.4 | Counter32 | read-only | The number of CLP-0 cells discarded due to policing during a 15 minute interval. |
| C32 caviIntEgrClp1DiscCells | 1.3.6.1.4.1.9.9.129.1.2.2.1.5 | Counter32 | read-only | The number of CLP-1 cells discarded due to policing during a 15 minute interval. |
| C32 caviIntEgrRcvClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.2.1.2 | Counter32 | read-only | The number of CLP-0 cells received from switch at the traffic management and policing device during a 15 minute interval. |
| C32 caviIntEgrRcvClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.2.1.3 | Counter32 | read-only | The number of CLP-1 cells received from switch at the traffic management and policing device during a 15 minute interval. |
| C32 caviIntEgrRcvEFCICells | 1.3.6.1.4.1.9.9.129.1.2.2.1.11 | Counter32 | read-only | The number of EFCI cells received from the switch at traffic management and policing device during a 15 minute interval. |
| C32 caviIntEgrRcvOAMCells | 1.3.6.1.4.1.9.9.129.1.2.2.1.8 | Counter32 | read-only | The number of OAM cells received from the switch at the traffic management and policing device during a 15 minute interval. |
| C32 caviIntEgrRMCells | 1.3.6.1.4.1.9.9.129.1.2.2.1.9 | Counter32 | read-only | The number of RM cells transmitted to the network from the switch during a 15 minute interval. |
| C32 caviIntEgrXmtClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.2.1.6 | Counter32 | read-only | The number of CLP-0 cells transmitted to the network after traffic management and policing during a 15 minute interval. |
| C32 caviIntEgrXmtClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.2.1.7 | Counter32 | read-only | The number of CLP-1 cells transmitted to the network after traffic management and policing during a 15 minute interval. |
| C32 caviIntEgrXmtEFCICells | 1.3.6.1.4.1.9.9.129.1.2.2.1.10 | Counter32 | read-only | The number of EFCI cells transmitted to the network after traffic management and policing during a 15 minute interval. |
| C32 caviIntEgrXmtOAMCells | 1.3.6.1.4.1.9.9.129.1.2.2.1.12 | Counter32 | read-only | The number of OAM loopback cells transmitted to network after traffic management and policing during a 15 minute interval. |
| C32 caviIntIngClp0DiscCells | 1.3.6.1.4.1.9.9.129.1.2.4.1.4 | Counter32 | read-only | The number of CLP-0 cells discarded due to policing in ingress direction, during a 15-minute interval. |
| C32 caviIntIngClp1DiscCells | 1.3.6.1.4.1.9.9.129.1.2.4.1.5 | Counter32 | read-only | The number of CLP-1 cells discarded due to policing in ingress direction, during a 15-minute interval . |
| C32 caviIntIngRcvClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.4.1.2 | Counter32 | read-only | The number of CLP-0 cells received from network at the traffic management and policing device in ingress direction, during a 15-minute interval. |
| C32 caviIntIngRcvClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.4.1.3 | Counter32 | read-only | The number of CLP-1 cells received from network at the traffic management and policing device in ingress direction, during a 15-minute interval. |
| C32 caviIntIngRcvEFCICells | 1.3.6.1.4.1.9.9.129.1.2.4.1.11 | Counter32 | read-only | The number of EFCI cells received from the network at traffic management and policing device in ingress direction, during a 15-minute interval. |
| C32 caviIntIngRcvOAMCells | 1.3.6.1.4.1.9.9.129.1.2.4.1.8 | Counter32 | read-only | The number of OAM cells received from the network at the traffic management and policing device in ingress direction, during a 15-minute interval. |
| C32 caviIntIngRMCells | 1.3.6.1.4.1.9.9.129.1.2.4.1.9 | Counter32 | read-only | The number of RM cells transmitted to the switch from the network in ingress direction, during a 15-minute interval. |
| C32 caviIntIngXmtClp0Cells | 1.3.6.1.4.1.9.9.129.1.2.4.1.6 | Counter32 | read-only | The number of CLP-0 cells transmitted to the switch after traffic management and policing in ingress direction, during a 15-minute interval. |
| C32 caviIntIngXmtClp1Cells | 1.3.6.1.4.1.9.9.129.1.2.4.1.7 | Counter32 | read-only | The number of CLP-1 cells transmitted to the switch after traffic management and policing in ingress direction, during a 15-minute interval. |
| C32 caviIntIngXmtEFCICells | 1.3.6.1.4.1.9.9.129.1.2.4.1.10 | Counter32 | read-only | The number of EFCI cells transmitted to the switch after traffic management and policing in ingress direction, during a 15-minute interval. |
| C32 caviIntIngXmtOAMCells | 1.3.6.1.4.1.9.9.129.1.2.4.1.12 | Counter32 | read-only | The number of OAM loopback cells transmitted to switch after traffic management and policing in ingress direction, during a 15-minute interval. |
| U32 caviMaxRate | 1.3.6.1.4.1.9.9.129.1.1.1.1.5 | Unsigned32 | read-create | ATM virtual interface's maximum cell rate. If bandwidth is available, the interface will be allocated bandwidth upto this value. The total bandwidth of connections configured over this interface cannot exceed this value. The value of this object can't exceed the 'ifSpeed' or 'ifHighSpeed' value in ifTable for the associated 'caviPhyIfIndex'. ATM cell bandwidths for various physical lines are: OC192 line : 22605280 cells/sec OC48 line : 5651320 cells/sec OC12 line : 1412830 cells/sec OC3 line : 353207 cells/sec T3 line : 96000 cells/sec E3 line : 80000 cells/sec. |
| OID caviMaxVpiNum | 1.3.6.1.4.1.9.9.129.1.1.1.1.11 | AtmVpIdentifier | read-create | This object is mandatory while configuring this ATM virtual interface as caviIfType evuni(5) or evnni(6). The range of VPI accepted by the agent depends on caviIfType. The evuni accepts a range from 0 to 255, while the evnni accepts a range from 0 to 4095. The agent rejects a SET on this object for any interface other than a evuni/evnni. A GET operation for interfaces other than a evuni/evnni would always yield 0 |
| caviMIBCompliance | 1.3.6.1.4.1.9.9.129.3.1.1 | The Compliance statement for cisco AtmVirtualIf management group. | ||
| caviMIBComplianceRev1 | 1.3.6.1.4.1.9.9.129.3.1.2 | Compliance statement for cisco AtmVirtualIf management group with support for virtual user and network ports | ||
| caviMIBComplianceRev2 | 1.3.6.1.4.1.9.9.129.3.1.3 | Compliance statement for cisco AtmVirtualIf management group with support for virtual user and network ports | ||
| caviMIBComplianceRev3 | 1.3.6.1.4.1.9.9.129.3.1.4 | Compliance statement for cisco AtmVirtualIf management group with support for virtual user and network ports | ||
| caviMIBCompliances | 1.3.6.1.4.1.9.9.129.3.1 | |||
| caviMIBConformance | 1.3.6.1.4.1.9.9.129.3 | |||
| caviMIBGroup | 1.3.6.1.4.1.9.9.129.3.2.1 | These are objects related to ciscoAtmVirtualIf configuration group. | ||
| caviMIBGroupRev1 | 1.3.6.1.4.1.9.9.129.3.2.7 | Definition of additional objects caviMinVpiNum and caviMaxVpiNum, which are required to support the evuni and evnni functionality. | ||
| caviMIBGroups | 1.3.6.1.4.1.9.9.129.3.2 | |||
| U32 caviMinRate | 1.3.6.1.4.1.9.9.129.1.1.1.1.4 | Unsigned32 | read-create | ATM virtual interface's guaranteed cell rate. This is the guaranteed bandwidth allocated for the interface. The sum of caviMinRate of all ATM virtual interfaces configured on a single physical line, must not exceed the bandwidth of the physical line. Creation of a row is rejected when the sum of caviMinRate of all existing ATM virtual interfaces exceeds the physical line bandwidth. The value of this object can't exceed the 'ifSpeed' or 'ifHighSpeed' value in ifTable for the associated 'caviPhyIfIndex'. ATM cell bandwidths for various physical lines are: OC192 line : 22605280 cells/sec OC48 line : 5651320 cells/sec OC12 line : 1412830 cells/sec OC3 line : 353207 cells/sec T3 line : 96000 cells/sec E3 line : 80000 cells/sec. |
| OID caviMinVpiNum | 1.3.6.1.4.1.9.9.129.1.1.1.1.10 | AtmVpIdentifier | read-create | This object is mandatory while configuring this ATM virtual interface as caviIfType evuni(5) or evnni(6). The range of VPI accepted by the agent depends on caviIfType. The evuni accepts a range from 0 to 255, while the evnni accepts a range from 0 to 4095. The object specifies the minimum VPI for a evuni/evnni interface. The agent ignores a SET on this object for any interface other than a evuni/evnni. A GET operation for interfaces other than a evuni/evnni would always yield 0 |
| NUM caviPhyIfIndex | 1.3.6.1.4.1.9.9.129.1.1.1.1.2 | InterfaceIndex | read-create | This object identifies the interface number ( 'ifIndex' ) assigned to sonet(39),ds3(30),ds1(18),atmIma(107). |
| ROW caviRowStatus | 1.3.6.1.4.1.9.9.129.1.1.1.1.9 | RowStatus | read-create | This object allows create and delete operations on caviTable entries. An entry is created in the table by setting this object to createAndGo(4). An entry is deleted from the table by setting this object to destroy(6). An entry in this table may be modified after creation. |
| caviStatEgressEntry | 1.3.6.1.4.1.9.9.129.1.2.1.1 | not-accessible | An entry for egress ATM virtual interface statistics. In all the following descriptions, CLP-0 means Cell Loss Priority = 0, CLP-1 means Cell Loss Priority = 1. Statistics are being collected before and after the traffic management and policing device. | |
| caviStatEgressTable | 1.3.6.1.4.1.9.9.129.1.2.1 | not-accessible | This table reflects real time statistics associated with each of the ATM virtual interfaces on the egress side. Ingress direction means coming from network into switch, Egress direction means going from switch into the network. | |
| caviStatIngressEntry | 1.3.6.1.4.1.9.9.129.1.2.3.1 | not-accessible | An entry for egress ATM virtual interface statistics. In all the following descriptions, CLP-0 means Cell Loss Priority = 0, CLP-1 means Cell Loss Priority = 1. Statistics are being collected before and after the traffic management and policing device. | |
| caviStatIngressTable | 1.3.6.1.4.1.9.9.129.1.2.3 | not-accessible | This table reflects real time statistics associated with each of the ATM virtual interfaces on the ingress side. | |
| caviStatistics | 1.3.6.1.4.1.9.9.129.1.2 | |||
| caviTable | 1.3.6.1.4.1.9.9.129.1.1.1 | not-accessible | This table is used for creating ATM virtual Interfaces. The ATM virtual interfaces are created on physical interfaces. For each entry created in this table, there will be an entry created in the ifTable with ifType atmVirtual(149). For each entry deleted from this table, the corresponding entry from ifTable will be deleted. The ifIndex value for ifType atmVirtual(149) is used for indexing to atmInterfaceConfTable for getting information on a ATM virtual interface. | |
| NUM caviViIfIndex | 1.3.6.1.4.1.9.9.129.1.1.1.1.3 | InterfaceIndex | read-only | This object identifies the ATM virtual interface number ('ifIndex') assigned to this entry, and is used to identify corresponding rows in the IF-MIB. Note that re-inititalization of the management agent may cause a client's 'caviViIfIndex' to change. |
| OID caviVpiNum | 1.3.6.1.4.1.9.9.129.1.1.1.1.8 | AtmVpIdentifier | read-create | This object is used when configuring ATM virtual interfaces of caviIftype vuni(4) or vnni (3). A non-zero value is required for vuni / vnni operation. The value set in this object for other type of caviIfTypes would be ignored by the agent. The GET operation on this object would return 0 for caviIfTypes other than vuni/vnni. |
| ciscoAtmVirtualIfMIB | 1.3.6.1.4.1.9.9.129 | The MIB module to manage ATM Virtual interface objects. ATM virtual interfaces are configured on a physical line. | ||
| ciscoAtmVirtualIfMIBObjects | 1.3.6.1.4.1.9.9.129.1 |
RFC description
Manages ATM Virtual interface objects configured on Cisco physical lines with ingress and egress performance counters.
Start monitoring Cisco ATM-capable routers/switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.