ALCATEL-IND1-TIMETRA-PORT-MIB

All MIBs › ALCATEL-IND1-TIMETRA-PORT-MIB

Organization: Alcatel

Last Updated: 2008-01-01

Category: Network Interfaces, Vendor: Alcatel-Lucent

Description:

Alcatel 7750 SR service router port MIB for managing physical and logical port parameters and encapsulation types.

Imported Objects

TmnxAlarmState
TmnxMDAChanType
TmnxPortAdminStatus
tmnxChassisIndex	OBJECT-TYPE
tmnxChassisNotifyChassisId	OBJECT-TYPE
tmnxHwConformance	OBJECT-IDENTITY
tmnxHwNotification	OBJECT-IDENTITY
tmnxHwObjs	OBJECT-IDENTITY

From ALCATEL-IND1-TIMETRA-GLOBAL-MIB

timetraSRMIBModules

OBJECT-IDENTITY

From ALCATEL-IND1-TIMETRA-TC-MIB

TFCName
TItemDescription
TItemLongDescription
TMlpppQoSProfileId
TNamedItem
TNamedItemOrEmpty
TPortSchedulerCIR
TPortSchedulerPIR
TQueueId
TSecondaryShaper10GPIRRate
TmnxActionType
TmnxOperState
TmnxPortID

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowPointer
RowStatus
TEXTUAL-CONVENTION
TimeInterval
TimeStamp
TruthValue

What Is ALCATEL-IND1-TIMETRA-PORT-MIB?

This is Alcatel-Lucent's Timetra-derived enterprise MIB for managing physical and logical ports on the Alcatel-Lucent 7x50 series service routers (SR product line). It exposes hardware-oriented port data including port type, port class, administrative naming/alias, MAC addressing, encapsulation, and the timestamp of the last configuration change per port. As a hardware-status MIB it directly supports monitoring device hardware health, tracking when a port's operational state last changed (tmnxPortLastChangeTime), verifying port type/class against expected hardware, and confirming assigned MAC addresses on physical interfaces. It is a vendor enterprise extension layered on top of standard IF-MIB/ifTable style port management concepts common to carrier-grade routers. It's typically deployed by service providers monitoring the port-level hardware inventory and change history of Alcatel-Lucent 7x50 SR routers in production networks. Engineers can download the ALCATEL-IND1-TIMETRA-PORT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-TIMETRA-PORT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

What Can Be Monitored

port type and class
port name/alias/description
port MAC address assignment
port last-change timestamp
port table modification history

Supported Devices

Alcatel-Lucent 7x50 SR series service routers

Monitoring Examples

A network operations team would poll tmnxPortTable/tmnxPortEntry indexed by tmnxPortPortID to enumerate all ports, checking tmnxPortType and tmnxPortClass to confirm expected hardware configuration. Monitoring tmnxPortTableLastChange and per-port tmnxPortLastChangeTime lets an admin detect unplanned port reconfiguration events. Cross-checking tmnxPortMacAddress against tmnxPortUserAssignedMac would reveal whether an operator has manually overridden a port's factory MAC address, useful for troubleshooting duplicate-MAC issues.

OIDs

OID symbolic	OID numeric	Type	Access	Description
tmnx7710PortTDMGroupV3v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.34			The group of objects supporting management of TDM type ports specific to the Alcatel 7710 SR series systems for revision 3.0.
tmnx7710PortTDMGroupV5v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.43			The group of objects supporting management of TDM type ports specific to the revision 5.0 on Alcatel 7710 SR series systems.
INT tmnxATMIntfCellFormat	1.3.6.1.4.1.6527.3.1.2.2.11.1.1.1	INTEGER	read-write	tmnxATMIntfCellFormat is used to set the cell format (UNI or NNI) that is to be used on the ATM interface.
tmnxATMIntfEntry	1.3.6.1.4.1.6527.3.1.2.2.11.1.1		not-accessible	The Parameters for a particular ATM Cell Management Interface. Entries cannot be created or deleted via SNMP SET operations. Entries will exist in this table when ATM encapsulation is configured on the port/channel.
INT tmnxATMIntfMapping	1.3.6.1.4.1.6527.3.1.2.2.11.1.1.3	INTEGER	read-write	The value of tmnxATMIntfMapping specifies the cell mapping that is to be used on this ATM interface. When tmnxPortChanType does not have a value of 'pdhDs3 (14)', 'inconsistentValue' error will be returned to SNMP SET requests. When tmnxPortChanType has a value of 'pdhDs3 (14)', tmnxATMIntfMapping can be set to 'plcp (2)'.
I32 tmnxATMIntfMinVpValue	1.3.6.1.4.1.6527.3.1.2.2.11.1.1.2	Integer32	read-write	tmnxATMIntfMinVpValue is used to set the minimum allowable VPI value that can be used on the ATM interface for a VPC.
tmnxATMIntfTable	1.3.6.1.4.1.6527.3.1.2.2.11.1		not-accessible	The tmnxATMIntfTable has an entry for each port/channel in the system that is configured for ATM. It contains ATM cell layer configuration parameters.
tmnxATMObjs	1.3.6.1.4.1.6527.3.1.2.2.11
TMN tmnxBPGrpAssocActiveBundleID	1.3.6.1.4.1.6527.3.1.2.2.4.25.1.3	TmnxBundleID	read-only	tmnxBPGrpAssocActiveBundleID identifies the bundle that is considered the active bundle. This bundle contains the members that are part of the active aps port. A value of zero is given if no bundle is considered active.
tmnxBPGrpAssocEntry	1.3.6.1.4.1.6527.3.1.2.2.4.25.1		not-accessible	Each row displays the relationship between a Bundle Protection group and its working and protection bundle.
TMN tmnxBPGrpAssocProtectBundleID	1.3.6.1.4.1.6527.3.1.2.2.4.25.1.2	TmnxBundleID	read-only	tmnxBPGrpAssocProtectBundleID identifies the protection bundle. A value of zero is given if no protection bundle is associated with the given tmnxBundleBundleID.
tmnxBPGrpAssocTable	1.3.6.1.4.1.6527.3.1.2.2.4.25		not-accessible	The tmnxBPGrpAssocTable has an entry for each Bundle Protection Group created on the system.
TMN tmnxBPGrpAssocWorkingBundleID	1.3.6.1.4.1.6527.3.1.2.2.4.25.1.1	TmnxBundleID	read-only	tmnxBPGrpAssocWorkingBundleID identifies the working bundle. A value of zero is given if no working bundle is associated with the given tmnxBundleBundleID.
TMN tmnxBundleBundleID	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.1	TmnxBundleID	not-accessible	tmnxBundleBundleID identifies this multilink bundle. The value of this object is calculated using the TiMOS encoding scheme described in TmnxBundleID. tmnxBundleBundleID is used as an index into the ifTable and the tmnxPortTable to access an entry corresponding to this entry.
tmnxBundleEntry	1.3.6.1.4.1.6527.3.1.2.2.4.14.1		not-accessible	Each row entry represents a multilink bundle on a MDA. Entries can be created and deleted via SNMP SET operations using the tmnxBundleRowStatus object. The tmnxBundleBundleID will contain the bundle number encoded in it. The bundle number is unique for a MDA. For each tmnxBundleEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
U32 tmnxBundleFragmentThreshold	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.16	Unsigned32	read-create	The value of tmnxBundleFragmentThreshold specifies the maximum length of a fragment transmitted across the multilink bundle. Values supported within each bundle type are H/W dependent. The value of 0 specifies no fragmentation. Currently, the following values are supported depending upon the tmnxBundleType value: tmnxBundleType tmnxBundleFragmentThreshold values supported mlppp 0; 128 to 512 inclusive imagrp 128
INT tmnxBundleImaGrpAlphaValue	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.23	INTEGER	read-create	tmnxBundleImaGrpAlphaValue specifies the number of consecutive ICP cells that need to be detected before moving from the IMA Sync State to the IMA Hunt State.
G32 tmnxBundleImaGrpAvailRxCR	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.14	Gauge32	read-only	tmnxBundleImaGrpAvailRxCR specifies the available bandwidth on this IMA group in the receive direction. It only considers members that are in the Active State.
G32 tmnxBundleImaGrpAvailTxCR	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.13	Gauge32	read-only	tmnxBundleImaGrpAvailTxCR specifies the available transmit bandwidth on this IMA group. It only considers members that are in the Active State.
INT tmnxBundleImaGrpBetaValue	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.24	INTEGER	read-create	tmnxBundleImaGrpBetaValue specifies the number of consecutive errored ICP cells that need to be detected before moving from the IMA Sync State to the IMA Hunt State
U32 tmnxBundleImaGrpDiffDelayMaxObs	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.33	Unsigned32	read-only	tmnxBundleImaGrpDiffDelayMaxObs indicates the latest maximum differential delay observed between links having the least and most link propagation delay among the received links configured in this IMA group.
tmnxBundleImaGrpEntry	1.3.6.1.4.1.6527.3.1.2.2.4.21.1		not-accessible	Each row entry contains data on an IMA Group.
C32 tmnxBundleImaGrpErrorIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.19	Counter32	read-only	tmnxBundleImaGrpErrorIcpCells specifies number of ICP cells with HEC or CRC-10 errors.
TMN tmnxBundleImaGrpFeClockMode	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.27	TmnxImaGrpClockModes	read-create	tmnxBundleImaGrpFeClockMode specifies far-end transmit clock mode.
C32 tmnxBundleImaGrpFeFails	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.16	Counter32	read-only	tmnxBundleImaGrpFeFails specifies the number of reported IMA Group far-end failures since boot time.
INT tmnxBundleImaGrpGammaValue	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.25	INTEGER	read-create	tmnxBundleImaGrpGammaValue specifies the number of consecutive valid ICP cells that need to be detected before moving from the IMA pre-Sync State to the IMA Hunt State.
U32 tmnxBundleImaGrpLeastDelayLink	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.34	Unsigned32	read-only	tmnxBundleImaGrpLeastDelayLink indicates a member link which has the smallest link propagation delay. If this delay has yet to be determined or no member link has been configured, a value of zero is returned.
U32 tmnxBundleImaGrpLnkActTimer	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.1	Unsigned32	read-create	tmnxBundleImaGrpLnkActTimer specifies the Link Activation Timer used to clear an existing LIF, LODS and FRI-IMA alarm. The time specified determines how long is needed for member links to stabilize before being activated.
U32 tmnxBundleImaGrpLnkDeactTimer	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.2	Unsigned32	read-create	tmnxBundleImaGrpLnkDeactTimer specifies the Link Deactivation Timer used to raise an LIF, LODS and FRI-IMA alarm. The time specified determines how long before a member link is declared in error and is deactivated.
C32 tmnxBundleImaGrpLostRxIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.20	Counter32	read-only	tmnxBundleImaGrpLostRxIcpCells specifies the number of missing ICP cells at the expected offset.
U32 tmnxBundleImaGrpMaxConfBw	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.29	Unsigned32	read-create	tmnxBundleImaGrpMaxConfBw specifies the number of links that is used to determine the maximum configurable bandwidth that is allowed to be used for this IMA group.
TMN tmnxBundleImaGrpNeClockMode	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.26	TmnxImaGrpClockModes	read-create	tmnxBundleImaGrpNeClockMode specifies near-end transmit clock mode.
C32 tmnxBundleImaGrpNeFails	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.15	Counter32	read-only	tmnxBundleImaGrpNeFails specifies the number of reported IMA Group failures since boot time.
C32 tmnxBundleImaGrpRxIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.18	Counter32	read-only	tmnxBundleImaGrpRxIcpCells specifies number of received ICP cells for this IMA Group.
INT tmnxBundleImaGrpRxId	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.5	INTEGER	read-only	tmnxBundleImaGrpRxId specifies the IMA ID generated at group creation time used by the far-end.
INT tmnxBundleImaGrpRxOamLablVal	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.22	INTEGER	read-only	tmnxBundleImaGrpRxOamLablVal specifies far-end value received.
TMN tmnxBundleImaGrpRxRefLnk	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.7	TmnxPortID	read-only	tmnxBundleImaGrpRxRefLnk specifies the IMA bundle member that was detected to be the receive timing reference link. If no member has been detected as the reference link a value of zero is returned.
C32 tmnxBundleImaGrpSmDownSecs	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.11	Counter32	read-only	tmnxBundleImaGrpSmDownSecs specifies the number of seconds that the IMA Group State Machine is not Operational.
TMN tmnxBundleImaGrpSmFailState	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.10	TmnxImaGrpFailState	read-only	tmnxBundleImaGrpSmFailState specifies the current state of the IMA Group.
TMN tmnxBundleImaGrpSmFeState	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.9	TmnxImaGrpState	read-only	tmnxBundleImaGrpSmFeState specifies the current state of the IMA Group for the far-end.
TMN tmnxBundleImaGrpSmNeState	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.8	TmnxImaGrpState	read-only	tmnxBundleImaGrpSmNeState specifies the current state of the IMA Group for the near-end.
C32 tmnxBundleImaGrpSmOperSecs	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.12	Counter32	read-only	tmnxBundleImaGrpSmOperSecs specifies the number of seconds that the IMA Group State Machine has been in the Operational State.
INT tmnxBundleImaGrpSymmetryMode	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.3	INTEGER	read-create	tmnxBundleImaGrpSymmetryMode specifies the type of cell rate transfer over the virtual link.
tmnxBundleImaGrpTable	1.3.6.1.4.1.6527.3.1.2.2.4.21		not-accessible	The tmnxBundleImaGrpTable contains IMA Group data
TMN tmnxBundleImaGrpTestMember	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.31	TmnxPortID	read-create	tmnxBundleImaGrpTestMember specifies a member link to be used for the test pattern procedure. A value of zero indicates that no member link has been selected. When tmnxBundleImaGrpTestState does not have the value 'disabled', an attempt to set this object will be rejected with an inconsistentValue error.
INT tmnxBundleImaGrpTestPattern	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.32	INTEGER	read-create	tmnxBundleImaGrpTestPattern specifies the Transmit Test Pattern in an IMA group loopback operation. This value may only be changed when tmnxBundleImaGrpTestState is 'disabled'.
TMN tmnxBundleImaGrpTestState	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.30	TmnxImaTestState	read-create	tmnxBundleImaGrpTestState specifies the current state of the test pattern procedure. A value of 'disabled' specifies that the group is currently not running. A value of 'operating' enables the test pattern procedure. The test pattern procedure continues until it is 'disabled'.
C32 tmnxBundleImaGrpTxIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.17	Counter32	read-only	tmnxBundleImaGrpTxIcpCells specifies number of transmitted ICP cells for this IMA Group.
INT tmnxBundleImaGrpTxId	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.4	INTEGER	read-only	tmnxBundleImaGrpTxId specifies the IMA Id generated at group creation time used by the near-end.
INT tmnxBundleImaGrpTxOamLablVal	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.21	INTEGER	read-only	tmnxBundleImaGrpTxOamLablVal specifies near-end value to be transmitted.
TMN tmnxBundleImaGrpTxRefLnk	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.6	TmnxPortID	read-only	tmnxBundleImaGrpTxRefLnk specifies the IMA bundle member that was selected to be the transmit timing reference link. If no member has been selected as the reference link a value of zero is returned.
TMN tmnxBundleImaGrpVersion	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.28	TmnxImaGrpVersion	read-create	tmnxBundleImaGrpVersion specifies the IMA Version for this group.
C32 tmnxBundleInputDiscards	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.18	Counter32	read-only	tmnxBundleInputDiscards indicates the number of LCP packets that were discarded. This object is only supported for a tmnxBundleType value of mlppp.
TIM tmnxBundleLastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.15	TimeStamp	read-only	The tmnxBundleLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxBundleEntry row for this channel group.
T/F tmnxBundleLFI	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.20	TruthValue	read-create	tmnxBundleLFI specifies if Link Fragmentation and Interleaving is enabled on the multilink bundle. A value of 'false' indicates that Link Fragmentation and Interleaving is disabled on the multilink bundle while a value of 'true' indicates that Link Fragmentation and Interleaving is enabled on the multilink bundle. This object is only supported for tmnxBundleType value of mlppp. The value of tmnxBundleLFI may be modified only when no members are part of the bundle. This object cannot be set to true when tmnxBundleMlpppClassCount object value is set to enable Multiclass MLPPP on the bundle.
T/F tmnxBundleMemberActive	1.3.6.1.4.1.6527.3.1.2.2.4.15.1.2	TruthValue	read-only	tmnxBundleMemberActive is set to 'false' for one of reasons in tmnxBundleMemberDownReason.
INT tmnxBundleMemberDownReason	1.3.6.1.4.1.6527.3.1.2.2.4.15.1.3	INTEGER	read-only	tmnxBundleMemberDownReason contains the reason code for marking the member link of the bundle to down (i.e. tmnxBundleMemberActive will be set to false): none - The link is active and the value of tmnxBundleMemberActive is 'true'. outOfService - The link operational status is down. redDiffDelayExceeded - The differential delay of the link exceeded the configured value of red differential delay and tmnxBundleRedDiffDelayAction was configured as 'down'. mismatchEndPtDiscriminator - Detected inconsistent peer endpoint discriminator for the bundle. peerNotBundleMember - When the peer is either not added to the bundle or is removed from the bundle. underNegotiation - When the local end is trying to negotiate with the peer. peerInvalidMlHdrFmt - The peer does not support the required ML-PPP header format. The remote peer must support the same short/long sequence code, and at least as many classes as configured for the local bundle.
tmnxBundleMemberEntry	1.3.6.1.4.1.6527.3.1.2.2.4.15.1		not-accessible	Each row represents a port associated with a bundle. Entries can be added or removed from this table using SNMP SET operation.
tmnxBundleMemberImaEntry	1.3.6.1.4.1.6527.3.1.2.2.4.22.1		not-accessible	Each row entry represents an IMA link associated with an IMA Group.
C32 tmnxBundleMemberImaErrorIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.24	Counter32	read-only	tmnxBundleMemberImaErrorIcpCells indicates the number of ICP cells with HEC or CRC-10 errors.
TMN tmnxBundleMemberImaFeRxFailState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.6	TmnxImaLnkFailState	read-only	tmnxBundleMemberImaFeRxFailState indicates the IMA link failure reason for the far-end.
C32 tmnxBundleMemberImaFeRxNumFails	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.21	Counter32	read-only	tmnxBundleMemberImaFeRxNumFails indicates the number of times that a far-end receive alarm is set on the IMA link.
TMN tmnxBundleMemberImaFeRxState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.4	TmnxImaLnkState	read-only	tmnxBundleMemberImaFeRxState indicates the state of far-end receive IMA link.
C32 tmnxBundleMemberImaFeRxUnuseSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.17	Counter32	read-only	tmnxBundleMemberImaFeRxUnuseSecs indicates the number of unavailable seconds at the far-end receive link state machine.
C32 tmnxBundleMemberImaFeSevErrSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.11	Counter32	read-only	tmnxBundleMemberImaFeSevErrSecs indicates the number of one second intervals in which the far-end contains IMA-RDI defects.
C32 tmnxBundleMemberImaFeTxNumFails	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.20	Counter32	read-only	tmnxBundleMemberImaFeTxNumFails indicates the number of times that a far-end transmit alarm is set on the IMA link.
TMN tmnxBundleMemberImaFeTxState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.3	TmnxImaLnkState	read-only	tmnxBundleMemberImaFeTxState indicates the state of far-end transmit IMA link.
C32 tmnxBundleMemberImaFeTxUnuseSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.16	Counter32	read-only	tmnxBundleMemberImaFeTxUnuseSecs indicates the number of unavailable seconds at the far-end transmit link state machine.
C32 tmnxBundleMemberImaFeUnavailSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.13	Counter32	read-only	tmnxBundleMemberImaFeUnavailSecs indicates the number of unavailable seconds at the near-end.
C32 tmnxBundleMemberImaLstRxIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.25	Counter32	read-only	tmnxBundleMemberImaLstRxIcpCells indicates the number of lost ICP cells at the expected offset.
TMN tmnxBundleMemberImaNeRxFailState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.5	TmnxImaLnkFailState	read-only	tmnxBundleMemberImaNeRxFailState indicates the IMA link failure reason for the near-end.
C32 tmnxBundleMemberImaNeRxNumFails	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.19	Counter32	read-only	tmnxBundleMemberImaNeRxNumFails indicates the number of times that a near-end receive alarm is set on the IMA link.
TMN tmnxBundleMemberImaNeRxState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.2	TmnxImaLnkState	read-only	tmnxBundleMemberImaNeRxState indicates the state of near-end receive IMA link.
C32 tmnxBundleMemberImaNeRxUnuseSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.15	Counter32	read-only	tmnxBundleMemberImaNeRxUnuseSecs indicates the number of unavailable seconds at the near-end receive link state machine.
C32 tmnxBundleMemberImaNeSevErrSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.10	Counter32	read-only	tmnxBundleMemberImaNeSevErrSecs indicates the number of one second intervals in which thirty percent or more of the near-end ICP cells are in violation, or link defects have occurred.
C32 tmnxBundleMemberImaNeTxNumFails	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.18	Counter32	read-only	tmnxBundleMemberImaNeTxNumFails indicates the number of times that a near-end transmit alarm is set on the IMA link.
TMN tmnxBundleMemberImaNeTxState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.1	TmnxImaLnkState	read-only	tmnxBundleMemberImaNeTxState indicates the state of near-end transmit IMA link.
C32 tmnxBundleMemberImaNeTxUnuseSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.14	Counter32	read-only	tmnxBundleMemberImaNeTxUnuseSecs indicates the number of unavailable seconds at the near-end transmit link state machine.
C32 tmnxBundleMemberImaNeUnavailSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.12	Counter32	read-only	tmnxBundleMemberImaNeUnavailSecs indicates the number of unavailable seconds at the near-end.
C32 tmnxBundleMemberImaOifAnomalies	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.26	Counter32	read-only	tmnxBundleMemberImaOifAnomalies indicates the number of OIF anomalies at the near-end.
U32 tmnxBundleMemberImaRelDelay	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.29	Unsigned32	read-only	tmnxBundleMemberImaRelDelay indicates the latest measured delay on this member link relative to the member link with the least delay within the same IMA group
C32 tmnxBundleMemberImaRxIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.23	Counter32	read-only	tmnxBundleMemberImaRxIcpCells indicates the number of ICP cells that have been received on the IMA link.
INT tmnxBundleMemberImaRxLid	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.8	INTEGER	read-only	tmnxBundleMemberImaRxLid indicates the Link Identifier used on the receive IMA link.
INT tmnxBundleMemberImaRxTestPattern	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.28	INTEGER	read-only	tmnxBundleMemberImaRxTestPattern indicates the received test pattern value on this link.
TMN tmnxBundleMemberImaRxTestState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.27	TmnxImaTestState	read-only	tmnxBundleMemberImaRxTestState indicates the current state of the test pattern on this link.
tmnxBundleMemberImaTable	1.3.6.1.4.1.6527.3.1.2.2.4.22		not-accessible	The tmnxBundleMemberImaTable has an entry for an IMA link associated with an IMA Group.
C32 tmnxBundleMemberImaTxIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.22	Counter32	read-only	tmnxBundleMemberImaTxIcpCells indicates the number of ICP cells that have been transmitted on the IMA link.
INT tmnxBundleMemberImaTxLid	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.7	INTEGER	read-only	tmnxBundleMemberImaTxLid indicates the Link Identifier assigned to the transmit IMA link.
C32 tmnxBundleMemberImaViolations	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.9	Counter32	read-only	tmnxBundleMemberImaViolations indicates the number of ICP violations including errored, invalid or missing ICP cells.
ROW tmnxBundleMemberRowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.15.1.1	RowStatus	read-create	tmnxBundleMemberRowStatus controls the creation and deletion of row entries in the tmnxBundleMemberTable. tmnxPortPortID identifies the port to be associated with the bundle. A bundle entry with tmnxBundleBundleID has to exist in the tmnxBundleTable before creating an entry in this table.
tmnxBundleMemberTable	1.3.6.1.4.1.6527.3.1.2.2.4.15		not-accessible	The tmnxBundleMemberTable has an entry for a member port associated with a multilink bundle.
U32 tmnxBundleMemberUpTime	1.3.6.1.4.1.6527.3.1.2.2.4.15.1.4	Unsigned32	read-only	tmnxBundleMemberUpTime indicates the time since the bundle member is active as indicated by tmnxBundleMemberActive.
U32 tmnxBundleMinimumLinks	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.4	Unsigned32	read-create	tmnxBundleMinimumLinks is the minimum number of links that must be active for a bundle to be active. If the number of links drop below the given minimum then the multilink bundle will transition to an operation down state.
INT tmnxBundleMlpppClassCount	1.3.6.1.4.1.6527.3.1.2.2.4.26.1.3	INTEGER	read-create	The value of tmnxBundleMlpppClassCount specifies whether Multiclass MLPPP is enabled on a bundle with a tmnxBundleType of 'mlppp' and when enabled what is the number of classes to be negotiated/supported over the MLPPP bundle. The value of 0 disables multiclass MLPPP including negotiation in the PPP protocol. All other values specify the number of classes to be supported on a given multiclass bundle and enable Multiclass MLPPP negotiation on that bundle. Non-zero values supported are platform/MDA specific. The value of tmnxBundleMlpppClassCount must be set to 0 and cannot be changed when LFI is enabled on the bundle (see tmnxBundleLFI object in tmnxBundleTable). The value of tmnxBundleMlpppClassCount may be modified only when tmnxBundleNumLinks is zero. To set the value of tmnxBundleMlpppClassCount to a value greater than 4, the long sequence format must be enabled on the bundle (see tmnxBundleShortSequence object in tmnxBundleTable). Changing the value of tmnxBundleMlpppClassCount resets the values of tmnxBundleMlpppIngQoSProfId and tmnxBundleMlpppEgrQoSProfId to their defaults
TML tmnxBundleMlpppEgrQoSProfId	1.3.6.1.4.1.6527.3.1.2.2.4.26.1.5	TMlpppQoSProfileId	read-create	tmnxBundleMlpppEgrQoSProfId specifies egress QoS profile to be used for the outgoing traffic over this MLPPP bundle. The value of tmnxBundleMlpppEgrQoSProfId may be modified only when tmnxBundleNumLinks is zero. The value of tmnxBundleMlpppEgrQoSProfId of 0 indicates a default profile is used as applicable to a given H/W and the configured value of tmnxBundleMlpppClassCount.
OCT tmnxBundleMlpppEndpointID	1.3.6.1.4.1.6527.3.1.2.2.4.26.1.1	OCTET STRING	read-create	tmnxBundleMlpppEndpointID indentifies the Endpoint Discriminator identifier value within the specified tmnxBundleMlpppEndpointIDClass. The object tmnxPortAdminStatus must be set to 'outOfService' to change this value.
NUM tmnxBundleMlpppEndpointIDClass	1.3.6.1.4.1.6527.3.1.2.2.4.26.1.2	TmnxMlpppEndpointIdClass	read-create	tmnxBundleMlpppEndpointIDClass specifies the Link Control Protocol Endpoint Descriminator Class field type of the tmnxBundleMlpppEndpointID. The object tmnxPortAdminStatus must be set to 'outOfService' to change this value. Bundle DEFVAL Physical MLPPP Bundle ieee802dot1GlobalMacAddress (3) MLPPP Bundle Protection Group ipAddress (2)
tmnxBundleMlpppEntry	1.3.6.1.4.1.6527.3.1.2.2.4.26.1		not-accessible	Each row entry contains data on an MLPPP Bundle.
TML tmnxBundleMlpppIngQoSProfId	1.3.6.1.4.1.6527.3.1.2.2.4.26.1.4	TMlpppQoSProfileId	read-create	tmnxBundleMlpppIngQoSProfId specifies ingress QoS profile to be used for the incoming traffic over this MLPPP bundle. The value of tmnxBundleMlpppIngQoSProfId may be modified only when the value of tmnxBundleNumLinks is 0. The value of tmnxBundleMlpppIngQoSProfId of 0 indicates a default QoS profile is used as applicable to a given H/W and the configured value of tmnxBundleMlpppClassCount.
tmnxBundleMlpppTable	1.3.6.1.4.1.6527.3.1.2.2.4.26		not-accessible	The tmnxBundleMlpppTable contains MLPPP specific data.
U32 tmnxBundleMRRU	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.7	Unsigned32	read-create	tmnxBundleMRRU is used to configure the Max Received Reconstructed Unit (MRRU). This is the maximum frame that can be reconstructed from multilink fragments. This object is only applicable to tmnxBundleType values of mlppp or mlfr. All non applicable types have a value of zero.
U32 tmnxBundleNumActiveLinks	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.6	Unsigned32	read-only	tmnxBundleNumActiveLinks indicates the current number of active links belonging to this bundle.
U32 tmnxBundleNumLinks	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.5	Unsigned32	read-only	tmnxBundleNumLinks indicates the total number of links configured for this bundle.
U32 tmnxBundleOperMRRU	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.8	Unsigned32	read-only	tmnxBundleOperMRRU indicates the operational value of Max Received Reconstructed Unit (MRRU). This object is only applicable to tmnxBundleType values of mlppp or mlfr. All non applicable types have a value of zero.
U32 tmnxBundleOperMTU	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.10	Unsigned32	read-only	tmnxBundleOperMTU indicates the operational MTU of the bundle.
TMN tmnxBundleParentBundle	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.22	TmnxBundleID	read-create	tmnxBundleParentBundle specifies the parent to which this bundle belongs. A row for the given non zero walue of tmnxBundleParentBundle must exist for this row to be successfully created. If a bundle has no parent, its value is zero. tmnxBundleParentBundle can only be set at row creation.
U32 tmnxBundlePeerMRRU	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.9	Unsigned32	read-only	tmnxBundlePeerMRRU indicates the MRRU value sent by the peer during negotiation. This object is only applicable to tmnxBundleType values of mlppp or mlfr. All non applicable types have a value of zero.
TMN tmnxBundlePrimaryMemberPortID	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.19	TmnxPortID	read-only	tmnxBundlePrimaryMemberPortID indicates the TmnxPortID of the primary member of this bundle. The value of this object will be zero if there are no members configured in this bundle.
INT tmnxBundleProtectedType	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.21	INTEGER	read-create	tmnxBundleProtectedType identifies how this bundle is part of a tmnxBundleParentBundle. A value of 'none' identifies no protection, 'working' identifies it to be a working bundle of a tmnxBundleParentBundle and 'protection' identifies it to be a protection bundle of a tmnxBundleParentBundle. tmnxBundleProtectedType can only be set at row creation.
U32 tmnxBundleRedDiffDelay	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.11	Unsigned32	read-create	tmnxBundleRedDiffDelay configures the maximum acceptable differential delay for individual circuits within this multilink bundle. If the delay exceeds this threshold, a tmnxEqPortBndlRedDiffExceeded trap is issued. For a tmnxBundleType value of 'imagrp' a range of 0 to 50 is supported, 0 to 25 otherwise.
INT tmnxBundleRedDiffDelayAction	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.12	INTEGER	read-create	tmnxBundleRedDiffDelayAction specifies the action to be taken when the differential delay exceeds the threshold configured in tmnxBundleRedDiffDelay. For a tmnxBundleType value of 'imagrp', only the down action is supported.
ROW tmnxBundleRowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.2	RowStatus	read-create	tmnxBundleRowStatus controls the creation and deletion of row entries in the tmnxBundleTable. The manager has to first calculate the tmnxBundleBundleID based on the TiMOS encoding.
T/F tmnxBundleShortSequence	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.14	TruthValue	read-create	tmnxBundleShortSequence command specifies that the MLPPP bundle should use short (12 bit) sequence numbers. Instead of the standard long (24 bits) sequence number. This object is only applicable to tmnxBundleType values of mlppp.
tmnxBundleTable	1.3.6.1.4.1.6527.3.1.2.2.4.14		not-accessible	The tmnxBundleTable has an entry for a bundle created on the system.
INT tmnxBundleType	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.3	INTEGER	read-create	tmnxBundleType specifies the type of this multilink bundle. It provides a reference as to the type of bundle this row refers to but does not map to the direct value of bndle type defined in TmnxBundleID.
U32 tmnxBundleUpTime	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.17	Unsigned32	read-only	tmnxBundleUpTime indicates the time since the bundle is operationally 'inService'.
U32 tmnxBundleYellowDiffDelay	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.13	Unsigned32	read-create	tmnxBundleYellowDiffDelay configures the yellow warning threshold for the differential delay for the circuits within a given multilink bundle. If the delay exceeds this threshold, a tmnxEqPortBndlYellowDiffExceeded trap is issued. This object is only applicable to tmnxBundleType values of 'mlppp' or 'mlfr'. All non applicable types have a value of zero.
STR tmnxChannelIdxString	1.3.6.1.4.1.6527.3.1.2.2.4.16.1.1	DisplayString	not-accessible	tmnxChannelIdxString is an index into the table. It contains a string identifying a channel on the physical port.
TMN tmnxChannelPortID	1.3.6.1.4.1.6527.3.1.2.2.4.16.1.2	TmnxPortID	read-only	tmnxChannelPortID contains the port ID of the channel. This value is used to identify the entry for this channel in the ifTable or the tmnxPortTable.
U32 tmnxCiscoHDLCDiscardStatInPkts	1.3.6.1.4.1.6527.3.1.2.2.12.3.1.1	Unsigned32	read-only	tmnxCiscoHDLCDiscardStatInPkts indicates the number of inbound Cisco HDLC packets discarded.
U32 tmnxCiscoHDLCDiscardStatOutPkts	1.3.6.1.4.1.6527.3.1.2.2.12.3.1.2	Unsigned32	read-only	tmnxCiscoHDLCDiscardStatOutPkts indicates the number of outbound Cisco HDLC packets discarded.
U32 tmnxCiscoHDLCDownCount	1.3.6.1.4.1.6527.3.1.2.2.4.20.1.3	Unsigned32	read-create	tmnxCiscoHDLCDownCount specifies the number of 'tmnxCiscoHDLCKeepAliveInt' intervals that must pass without receiving a keepalive packet before the link is declared down. It is expected that the nodes at the two endpoints of the Cisco HDLC link are provisioned with the same values.
tmnxCiscoHDLCEntry	1.3.6.1.4.1.6527.3.1.2.2.4.20.1		not-accessible	The tmnxCiscoHDLCEntry specifies parameters for a particular interfaces running Cisco HDLC encapsulation. Entries cannot be created and deleted via SNMP SET operations.
tmnxCiscoHDLCGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.26			The group of objects supporting Cisco HDLC encapsulation on Alcatel 7750 SR series systems.
U32 tmnxCiscoHDLCKeepAliveInt	1.3.6.1.4.1.6527.3.1.2.2.4.20.1.1	Unsigned32	read-create	tmnxCiscoHDLCKeepAliveInt specifies the interval in seconds used for sending periodic keepalive packets. The default value is set to 10 seconds. A value of 0 specifies that the keepalive function is turned off. It is expected that the nodes at the two endpoints of the Cisco HDLC link are provisioned with the same values.
TMN tmnxCiscoHDLCOperState	1.3.6.1.4.1.6527.3.1.2.2.4.20.1.4	TmnxOperState	read-only	The value of tmnxCiscoHDLCOperState indicates the operational status of the Cisco HDLC protocol for this port.
U32 tmnxCiscoHDLCStatInOctets	1.3.6.1.4.1.6527.3.1.2.2.12.3.1.5	Unsigned32	read-only	tmnxCiscoHDLCStatInOctets indicates the number of inbound Cisco HDLC octets.
U32 tmnxCiscoHDLCStatInPkts	1.3.6.1.4.1.6527.3.1.2.2.12.3.1.3	Unsigned32	read-only	tmnxCiscoHDLCStatInPkts indicates the number of inbound Cisco HDLC packets.
U32 tmnxCiscoHDLCStatOutOctets	1.3.6.1.4.1.6527.3.1.2.2.12.3.1.6	Unsigned32	read-only	tmnxCiscoHDLCStatOutOctets indicates the number of outbound Cisco HDLC octets.
U32 tmnxCiscoHDLCStatOutPkts	1.3.6.1.4.1.6527.3.1.2.2.12.3.1.4	Unsigned32	read-only	tmnxCiscoHDLCStatOutPkts indicates the number of outbound Cisco HDLC packets.
tmnxCiscoHDLCStatsEntry	1.3.6.1.4.1.6527.3.1.2.2.12.3.1		not-accessible	An entry in the tmnxCiscoHDLCStatsTable.
tmnxCiscoHDLCStatsTable	1.3.6.1.4.1.6527.3.1.2.2.12.3		not-accessible	The tmnxCiscoHDLCStatsTable has an entry for each port in the system that is configured for Cisco HDLC encapsulation. It contains Cisco HDLC protocol statistics for the particular port.
tmnxCiscoHDLCTable	1.3.6.1.4.1.6527.3.1.2.2.4.20		not-accessible	The tmnxCiscoHDLCTable has an entry for each port in the system that is configured for Cisco HDLC. It contains the parameters related to Cisco HDLC protocol on this port.
U32 tmnxCiscoHDLCUpCount	1.3.6.1.4.1.6527.3.1.2.2.4.20.1.2	Unsigned32	read-create	tmnxCiscoHDLCUpCount specifies the number of continual keepalive packets that has to be received to declare the link up. It is expected that the nodes at the two endpoints of the Cisco HDLC link are provisioned with the same values.
I32 tmnxDDMAux1	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.27	Integer32	read-only	The value of tmnxDDMAux1 indicates the Manufacturer specific Auxiliary 1 information of the XFP.
I32 tmnxDDMAux1HiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.31	Integer32	read-only	The value of tmnxDDMAux1HiAlarm indicates the Manufacturer specific Auxiliary 1 hi-alarm threshold for the XFP.
I32 tmnxDDMAux1HiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.30	Integer32	read-only	The value of tmnxDDMAux1HiWarning indicates the Manufacturer specific Auxiliary 1 hi-warning threshold for the XFP.
I32 tmnxDDMAux1LowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.29	Integer32	read-only	The value of tmnxDDMAux1LowAlarm indicates the Manufacturer specific Auxiliary 1 low-alarm threshold for the XFP.
I32 tmnxDDMAux1LowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.28	Integer32	read-only	The value of tmnxDDMAux1LowWarning indicates the Manufacturer specific Auxiliary 1 low-warning threshold for the XFP.
INT tmnxDDMAux1Type	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.32	INTEGER	read-only	The value of tmnxDDMAux1Type indicates the measurement type of the Manufacturer specific Auxiliary 1 information of the XFP: none (0) - not specified. adp-bias-voltage (1) - LSB is 10mV. reserved-2 (2) - reserved for future use. tec-current (3) - LSB is 100uA. laser-temp (4) - degrees Celsius(C). laser-wavelength (5) - LSB is 0.05 nm. voltage-50 (6) - 5.0 supply voltage, LSB=100uV. voltage-33 (7) - 3.3 supply voltage, LSB=100uV. voltage-18 (8) - 1.8 supply voltage, LSB=100uV, voltage-52 (9) - -5.2 supply voltage, LSB=100uV. current-50 (10) - 5.0V supply current, LSB=100uA. reserved-11 (11) - reserved for future use. reserved-12 (12) - reserved for future use. current-33 (13) - 3.3V supply current, LSB=100uA. current-18 (14) - 1.8V supply current, LSB=100uA. current-52 (15) - -5.2V supply current, LSB=100uA.
I32 tmnxDDMAux2	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.33	Integer32	read-only	The value of tmnxDDMAux2 indicates the Manufacturer specific Auxiliary 2 information of the SFP/XFP.
I32 tmnxDDMAux2HiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.37	Integer32	read-only	The value of tmnxDDMAux2HiAlarm indicates the Manufacturer specific Auxiliary 2 hi-alarm threshold for the XFP.
I32 tmnxDDMAux2HiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.36	Integer32	read-only	The value of tmnxDDMAux2HiWarning indicates the Manufacturer specific Auxiliary 2 hi-warning threshold for the XFP.
I32 tmnxDDMAux2LowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.35	Integer32	read-only	The value of tmnxDDMAux2LowAlarm indicates the Manufacturer specific Auxiliary 2 low-alarm threshold for the XFP.
I32 tmnxDDMAux2LowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.34	Integer32	read-only	The value of tmnxDDMAux2LowWarning indicates the Manufacturer specific Auxiliary 2 low-warning threshold for the XFP.
INT tmnxDDMAux2Type	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.38	INTEGER	read-only	The value of tmnxDDMAux2Type indicates the measurement type of the Manufacturer specific Auxiliary 2 information of the XFP: none (0) - not specified. adp-bias-voltage (1) - LSB is 10mV. reserved-2 (2) - reserved for future use. tec-current (3) - LSB is 100uA. laser-temp (4) - degrees Celsius(C). laser-wavelength (5) - LSB is 0.05 nm. voltage-50 (6) - 5.0 supply voltage, LSB=100uV. voltage-33 (7) - 3.3 supply voltage, LSB=100uV. voltage-18 (8) - 1.8 supply voltage, LSB=100uV, voltage-52 (9) - -5.2 supply voltage, LSB=100uV. current-50 (10) - 5.0V supply current, LSB=100uA. reserved-11 (11) - reserved for future use. reserved-12 (12) - reserved for future use. current-33 (13) - 3.3V supply current, LSB=100uA. current-18 (14) - 1.8V supply current, LSB=100uA. current-52 (15) - -5.2V supply current, LSB=100uA.
U32 tmnxDDMExtCalRxPower0	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.45	Unsigned32	read-only	The value of tmnxDDMExtCalRxPower0 indicates the Rx_PWR(0) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalRxPower1	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.44	Unsigned32	read-only	The value of tmnxDDMExtCalRxPower1 indicates the Rx_PWR(1) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalRxPower2	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.43	Unsigned32	read-only	The value of tmnxDDMExtCalRxPower2 indicates the Rx_PWR(2) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalRxPower3	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.42	Unsigned32	read-only	The value of tmnxDDMExtCalRxPower3 indicates the Rx_PWR(3) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8462 Rev 10.2.
U32 tmnxDDMExtCalRxPower4	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.41	Unsigned32	read-only	The value of tmnxDDMExtCalRxPower4 indicates the Rx_PWR(4) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
I32 tmnxDDMExtCalTemperatureOffset	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.51	Integer32	read-only	The value of tmnxDDMExtCalTemperatureOffset indicates the T(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalTemperatureSlope	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.50	Unsigned32	read-only	The value of tmnxDDMExtCalTemperatureSlope indicates the T(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
I32 tmnxDDMExtCalTxLaserBiasOffset	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.47	Integer32	read-only	The value of tmnxDDMExtCalTxLaserBiasOffset indicates the Tx_l(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalTxLaserBiasSlope	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.46	Unsigned32	read-only	The value of tmnxDDMExtCalTxLaserBiasSlope indicates the Tx_l(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
I32 tmnxDDMExtCalTxPowerOffset	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.49	Integer32	read-only	The value of tmnxDDMExtCalTxPowerOffset indicates the Tx_PWR(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalTxPowerSlope	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.48	Unsigned32	read-only	The value of tmnxDDMExtCalTxPowerSlope indicates the Tx_PWR(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
I32 tmnxDDMExtCalVoltageOffset	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.53	Integer32	read-only	The value of tmnxDDMExtCalVoltageOffset indicates the V(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalVoltageSlope	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.52	Unsigned32	read-only	The value of tmnxDDMExtCalVoltageSlope indicates the V(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
T/F tmnxDDMExternallyCalibrated	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.40	TruthValue	read-only	The value of tmnxDDMExternallyCalibrated indicates whether the SFP was externally calibrated (true) or internally calibrated (false).
INT tmnxDDMFailedObject	1.3.6.1.4.1.6527.3.1.2.2.7.9	INTEGER	accessible-for-notify	Used by Digital Diagnostic Monitoring (DDM) Notifications, the value of tmnxDDMFailedObject indicates which object of the monitored SFP/XFP is in a failed or cleared threshold state.
BIT tmnxDDMFailedThresholds	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.39	Bits	read-only	The value of tmnxDDMFailedThresholds indicates which objects of the monitored SFP/XFP is in a failed or cleared threshold state. A set bit indicates that the specified threshold has been exceeded.
I32 tmnxDDMRxOpticalPower	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.21	Integer32	read-only	The value of tmnxDDMRxOpticalPower indicates the current Received Optical Power of the SFP/XFP in micro-Watts (uW).
I32 tmnxDDMRxOpticalPowerHiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.25	Integer32	read-only	The value of tmnxDDMRxOpticalPowerHiAlarm indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm.
I32 tmnxDDMRxOpticalPowerHiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.24	Integer32	read-only	The value of tmnxDDMRxOpticalPowerHiWarning indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-warning.
I32 tmnxDDMRxOpticalPowerLowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.23	Integer32	read-only	The value of tmnxDDMRxOpticalPowerLowAlarm indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a low-alarm.
I32 tmnxDDMRxOpticalPowerLowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.22	Integer32	read-only	The value of tmnxDDMRxOpticalPowerLowWarning indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a low-warning.
INT tmnxDDMRxOpticalPowerType	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.26	INTEGER	read-only	The value of tmnxDDMRxOpticalPowerType indicates whether the tmnxDDMRxOpticalPower was taken as an average, or as an Optical Modulation Amplitude (OMA).
I32 tmnxDDMSupplyVoltage	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.6	Integer32	read-only	The value of tmnxDDMSupplyVoltage indicates the current supply voltage of the SFP/XFP in micro-Volts (uV).
I32 tmnxDDMSupplyVoltageHiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.10	Integer32	read-only	The value of tmnxDDMSupplyVoltageHiAlarm indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a hi-alarm.
I32 tmnxDDMSupplyVoltageHiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.9	Integer32	read-only	The value of tmnxDDMSupplyVoltageHiWarning indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a hi-warning.
I32 tmnxDDMSupplyVoltageLowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.8	Integer32	read-only	The value of tmnxDDMSupplyVoltageLowAlarm indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a low-alarm.
I32 tmnxDDMSupplyVoltageLowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.7	Integer32	read-only	The value of tmnxDDMSupplyVoltageLowWarning indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a low-warning.
I32 tmnxDDMTemperature	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.1	Integer32	read-only	The value of tmnxDDMTemperature indicates the current temperature of the SFP/XFP in degrees Celsius.
I32 tmnxDDMTempHiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.5	Integer32	read-only	The value of tmnxDDMTempHiAlarm indicates the temperature of the SFP/XFP in degrees Celsius that triggers a hi-alarm.
I32 tmnxDDMTempHiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.4	Integer32	read-only	The value of tmnxDDMTempHiWarning indicates the temperature of the SFP/XFP in degrees Celsius that triggers a hi-warning.
I32 tmnxDDMTempLowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.3	Integer32	read-only	The value of tmnxDDMTempLowAlarm indicates the temperature of the SFP/XFP in degrees Celsius that triggers a low-alarm.
I32 tmnxDDMTempLowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.2	Integer32	read-only	The value of tmnxDDMTempLowWarning indicates the temperature of the SFP/XFP in degrees Celsius that triggers a low-warning.
I32 tmnxDDMTxBiasCurrent	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.11	Integer32	read-only	The value of tmnxDDMTxBiasCurrent indicates the current Transmit Bias Current of the SFP/XFP in micro-Amperes (uA).
I32 tmnxDDMTxBiasCurrentHiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.15	Integer32	read-only	The value of tmnxDDMTxBiasCurrentHiAlarm indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a hi-alarm.
I32 tmnxDDMTxBiasCurrentHiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.14	Integer32	read-only	The value of tmnxDDMTxBiasCurrentHiWarning indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a hi-warning.
I32 tmnxDDMTxBiasCurrentLowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.13	Integer32	read-only	The value of tmnxDDMTxBiasCurrentLowAlarm indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a low-alarm.
I32 tmnxDDMTxBiasCurrentLowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.12	Integer32	read-only	The value of tmnxDDMTxBiasCurrentLowWarning indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a low-warning.
I32 tmnxDDMTxOutputPower	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.16	Integer32	read-only	The value of tmnxDDMTxOutputPower indicates the current Output Power of the SFP/XFP in micro-Watts (uW).
I32 tmnxDDMTxOutputPowerHiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.20	Integer32	read-only	The value of tmnxDDMTxOutputPowerHiAlarm indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm.
I32 tmnxDDMTxOutputPowerHiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.19	Integer32	read-only	The value of tmnxDDMTxOutputPowerHiWarning indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm.
I32 tmnxDDMTxOutputPowerLowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.18	Integer32	read-only	The value of tmnxDDMTxOutputPowerLowAlarm indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a low-alarm.
I32 tmnxDDMTxOutputPowerLowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.17	Integer32	read-only	The value of tmnxDDMTxOutputPowerLowWarning indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a low-warning.
tmnxDigitalDiagMonitorEntry	1.3.6.1.4.1.6527.3.1.2.2.4.31.1		not-accessible	Each row represents a particular SFP/XFP that supports Digital Diagnostic Monitoring. Entries are created and deleted internally by the system.
tmnxDigitalDiagMonitorGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.53			The group of objects supporting the management of Digital Diagnostic Monitoring SFP/XFPs for revision 6.0 on Alcatel 7x50 SR series systems.
tmnxDigitalDiagMonitorTable	1.3.6.1.4.1.6527.3.1.2.2.4.31		not-accessible	The tmnxDigitalDiagMonitorTable has an entry for each SFP/XFP in the system that supports Digital Diagnostic Monitoring (DDM). The table is indexed by TmnxPortID. Each row in this table is dynamically added and removed internally by the system based on the presence or absence of DDM capable SFP/XFP components.
U32 tmnxDS0ChanGroupAcctPolicyId	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.10	Unsigned32	read-create	The value of tmnxDS0ChanGroupAcctPolicyId specifies an existing accounting policy to use for the ds0 channel-group. Accounting policies can only be associated with network ports or channels. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this channel-group. A zero value indicates that there is no accounting policy associated with this channel
T/F tmnxDS0ChanGroupCollectStats	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.11	TruthValue	read-create	The value of tmnxDS0ChanGroupCollectStats specifies whether or not the collection of accounting and statistical data for the network ds0 channel-group is collected. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPM will not obtain the results and write them to the billing file. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file.
INT tmnxDS0ChanGroupCRC	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.4	INTEGER	read-create	The value of tmnxDS0ChanGroupCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the error detection ability, but it also adds some performance overhead. For channel groups with encapsulation set to ATM, the default and only supported value is crc32 and applies to AAL5 CRC calculations on that channel group.
tmnxDS0ChanGroupEntry	1.3.6.1.4.1.6527.3.1.2.2.4.13.1		not-accessible	Each row entry represents one or more DS0 channels on a DS1 interface. tmnxDS0ChanGroupTimeSlots object is used to add or remove DS0 channels from the group. Entries can be created and deleted via SNMP SET operations using the tmnxDS0ChanGroupRowStatus object. For each tmnxDS0ChanGroupEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
TMN tmnxDS0ChanGroupIdleCycleFlags	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.8	TmnxDSXIdleCycleFlags	read-create	tmnxDS0ChanGroupIdleCycleFlags configures the value that the channel group transmits during idle cycle. The default value applies to HDLC channels only. For ATM and CEM channels the object does not really apply so a default value of 'none' is used and cannot be changed.
TIM tmnxDS0ChanGroupLastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.7	TimeStamp	read-only	The tmnxDS0ChanGroupLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS0ChanGroupEntry row for this channel group.
U32 tmnxDS0ChanGroupMTU	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.5	Unsigned32	read-create	The size of the largest packet which can be sent/received on the channel group, specified in octets. For groups that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent. Setting tmnxDS0ChanGroupMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1522 with mode access and encap-type bcp-null 1526 with mode access and encap-type bcp-dot1q 1502 with mode access and encap-type ipcp 4474 with mode access and encap-type frame-relay 1524 with mode access and encap-type atm 2092 with mode access and encap-type cem
U32 tmnxDS0ChanGroupOperMTU	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.6	Unsigned32	read-only	The negotiated size of the largest packet which can be sent on the channel group, specified in octets. For channel groups that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent.
TMN tmnxDS0ChanGroupPayloadFillType	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.12	TmnxDSXIdleFillType	read-create	The value of tmnxDS0ChanGroupPayloadFillType specifies the type of idle payload fill to be sent when the CEM channel group experiences an underrun. If the type is set to 'userDefinedPattern' then the value of tmnxDS0ChanGroupPayloadPattern is used to define the payload pattern. The default value depends on the encap type of the channel group: For CEM encap - 'allOnes' For all other encaps - 'notApplicable' For a ds1-unframed and e1-unframed CEM encap DS0 channel group the only supported value is 'allOnes'. For non-CEM encap channel groups the value cannot be changed.
U32 tmnxDS0ChanGroupPayloadPattern	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.13	Unsigned32	read-create	The value of tmnxDS0ChanGroupPayloadPattern specifies the idle payload fill pattern when the CEM channel group experiences an underrun and tmnxDS0ChanGroupPayloadFillType is set to 'userDefinedPattern'. The default value depends on the encap type of the channel group: For CEM encap channel group - 255 (Valid range 0..255) For non-CEM encap channel group - 0 (Valid range 0..0).
ROW tmnxDS0ChanGroupRowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.1	RowStatus	read-create	tmnxDS0ChanGroupRowStatus controls the creation and deletion of row entries in the tmnxDS0ChanGroupTable. The tmnxPortPortID for a channel group includes a group ID in the lower bits. The manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme.
T/F tmnxDS0ChanGroupScramble	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.9	TruthValue	read-create	tmnxDS0ChanGroupScramble indicates whether payload scrambling is enabled on this ATM channel. Both ends of the connection must use the same scrambling algorithm. The default value is 'true' if the tmnxPortEncapType is atmEncap for this channel, otherwise the default is 'false' and not allowed to change.
TMN tmnxDS0ChanGroupSignalFillType	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.14	TmnxDSXIdleFillType	read-create	The value of tmnxDS0ChanGroupSignalFillType specifies the type of idle signal fill to be sent when the CAS CEM channel group experiences an underrun. If the type is set to 'userDefinedPattern' then the value of tmnxDS0ChanGroupSignalPattern is used to define the signal pattern. The default value depends on the encap of the DS0 channel group and the signal-mode of the DS1/E1: For CEM encap on DS1/E1 with CAS signal mode - 'allOnes' For all other encaps or non-CAS CEM DS1/E1 - 'notApplicable' For CEM channel groups on DS1/E1 with no CAS signalling and non-CEM encap channel groups the value cannot be changed.
U32 tmnxDS0ChanGroupSignalPattern	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.15	Unsigned32	read-create	The value of tmnxDS0ChanGroupSignalPattern specifies the idle signal fill pattern when the CAS CEM channel group experiences an underrun and tmnxDS0ChanGroupSignalFillType is set to 'userDefinedPattern'. CAS ESF DS1 and CAS E1 support 4 signalling bits per timeslot (ABCD) CAS SF DS1 supports 2 signalling bits per timeslot (AB) The default value depends on the type of channel group: For CAS DS1 ESF or CAS E1 channel group - 15 (Valid range 0..15) For CAS DS1 SF channel group - 3 (Valid range 0..3) For non-CAS or non-CEM channel group - 0 (Valid range 0..0)
INT tmnxDS0ChanGroupSpeed	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.3	INTEGER	read-create	tmnxDS0ChanGroupSpeed configures the required link speed for all the time slots included in this channel group.
tmnxDS0ChanGroupTable	1.3.6.1.4.1.6527.3.1.2.2.4.13		not-accessible	The tmnxDS0ChanGroupTable has an entry for DS0 channels grouped together and belonging to a particular DS1 channel.
TMN tmnxDS0ChanGroupTimeSlots	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.2	TmnxDs0ChannelList	read-create	tmnxDS0ChanGroupTimeSlots is a bitmap which is used to add/remove DS0 timeslots from a channel group. The description for TmnxDs0ChannelList contains details of the bitmap organization. When a channel group is created on unframed DS1/E1, all timeslots as applicable to a given speed are auto-allocated and cannot be changed. When a channel group is created on a framed DS1/E1 or existing channel group's encapsulation is changed from ATM, the default of no timeslots is auto-assigned to the group. When a channel group on a framed DS1/E1 is configured for ATM encapsulation, the ATM defaults of 0x00FFFFFF (DS1) and 0XFFFEFFFE (E1) are auto-assigned and cannot be changed.
U32 tmnxDS1BerSdThreshold	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.24	Unsigned32	read-create	The value of tmnxDS1BerSdThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortDS1Alarm notification for a BER SD failure and a tmnxEqPortDS1AlarmClear notification for a BER SD failure clear. Bit error computed must reach/exceed threshold value over a pre-defined period of time for the tmnxEqPortSonetAlarm notification to be sent. The value of tmnxDS1Framing defines how the bit error is computed and what values of tmnxDS1BerSdThreshold are allowed. The following table defines this dependency: tmnxDS1Framing Bit error calculation and value supported -------------- ----------------------------------------- esf (1) each CRC error is counted as one bit error g704 (4) values supported are 1,5,10,50,100 other values bit error alarms not supported, value of tmnxDS1BerSdThreshold set to default and cannot be changed tmnxDS1BerSdThreshold value must not exceed the value of tmnxDS1BerSfThreshold.
U32 tmnxDS1BerSfThreshold	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.25	Unsigned32	read-create	The value of tmnxDS1BerSfThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortDS1Alarm notification for a BER SF failure and a tmnxEqPortDS1AlarmClear notification for a BER SF failure clear. Bit error computed must reach/exceed threshold value over a pre-defined period of time for the tmnxEqPortSonetAlarm notification to be sent. The value of tmnxDS1Framing defines how the bit errors are computed and what values of tmnxDS1BerSfThreshold are allowed. The following table defines this dependency: tmnxDS1Framing Bit error calculation and value supported -------------- ----------------------------------------- esf (1) each CRC error is counted as one bit error g704 (4) values supported are 1,5,10,50,100 other values bit error alarms not supported, value of tmnxDS1BerSfThreshold set to default and cannot be changed tmnxDS1BerSfThreshold value must not be smaller than tmnxDS1BerSdThreshold value
U32 tmnxDS1BERTDuration	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.9	Unsigned32	read-create	tmnxDS1BERTDuration is used to set the duration of the BERT test.
C64 tmnxDS1BERTErrors	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.16	Counter64	read-only	tmnxDS1BERTErrors is the number of bit errors detected during the last BERT test. It is valid only after tmnxDS1BERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
TMN tmnxDS1BERTOperStatus	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.14	TmnxDSXBertOperStatus	read-only	tmnxDS1BERTOperStatus indicates the status of the BERT test as specified by TmnxDSXBertOperStatus.
TMN tmnxDS1BERTPattern	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.8	TmnxDSXBertPattern	read-create	tmnxDS1BERTPattern object indicates the pattern used for the Bit Error Rate Test (BERT). The value of tmnxDS1BERTDuration indicates the duration of the test. Setting the value to 'none' terminates the test.
U32 tmnxDS1BERTSynched	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.15	Unsigned32	read-only	tmnxDS1BERTSynched is the number of seconds for which the BERT hardware was synchronized. This will be less than or equal to the duration of the last BERT test. It is valid only after tmnxDS1BERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
C64 tmnxDS1BERTTotalBits	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.17	Counter64	read-only	tmnxDS1BERTTotalBits is the total number of bits received during the last BERT test. Bits are only counted when the BERT hardware is synchronized. It is valid only after tmnxDS1BERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
I32 tmnxDS1BitErrorInsertionRate	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.7	Integer32	read-create	tmnxDS1BitErrorInsertionRate is used to insert bit errors for a BERT test. The number of error corresponds to 10^(-rate). A rate of 7 will cause an error rate of 10^(-7), or 1 error in every 10 million bits transmitted. If the value is set to 0, disables the insertion of bit errors into the BERT. Change in this value while the test is running is accepted but does not take effect until the test gets restarted.
TMN tmnxDS1ClockMasterPortId	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.23	TmnxPortID	read-only	The value of tmnxDS1ClockMasterPortId indicates the current clock synchronization master port id if tmnxDS1ClockSource is 'adaptive' or 'differential'.
TMN tmnxDS1ClockSource	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.13	TmnxDSXClockSource	read-create	tmnxDS1ClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed'), or from a clock recovered from the line's receive data stream ('loopTimed'), or recovered adaptively from the rate at which the data that is received and not from the physical layer ('adaptive'), or recovered from the differential timestamp in the RTP header ('differential').
TMN tmnxDS1ClockSyncState	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.22	TmnxDSXClockSyncState	read-only	The value of tmnxDS1ClockSyncState indicates the current clock synchronization state if tmnxDS1ClockSource is 'adaptive' or 'differential'.
NTF tmnxDS1E1LoopbackStarted	1.3.6.1.4.1.6527.3.1.3.2.2.0.24			The tmnxDS1E1LoopbackStarted notification is generated when a loopback is provisioned on a DS1/E1 port.
NTF tmnxDS1E1LoopbackStopped	1.3.6.1.4.1.6527.3.1.3.2.2.0.25			The tmnxDS1E1LoopbackStopped notification is generated when a loopback is removed on a DS1/E1 port. The value of tmnxSonetLoopback specifies the type of loopback that was configured and has now been removed.
tmnxDS1Entry	1.3.6.1.4.1.6527.3.1.2.2.4.12.1		not-accessible	Each row entry represents a DS1 channel on a IOM card in a chassis in the system. DS1 channel entries for DS3 ports cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when tmnxDS3ChannelChannelized is set to 'true'. DS1 channel entries for DS1 ports can be created and deleted via SNMP SET operations. For each tmnxDS1Entry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
INT tmnxDS1Framing	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.3	INTEGER	read-create	The value of tmnxDS1Framing indicates the type of framing associated with the channel: esf ESF (extended super frame) mode for T1 interfaces. sf SF (super frame) mode for T1 interfaces. g704 G.704 framing format for E1 interfaces. g704-no-crc4 G.704 framing with no CRC4 for E1 interfaces. e1-unframed E1 Unframed (G.703) mode for E1 interfaces. ds1-unframed Unframed mode for T1 interfaces. If tmnxDS1Type is set to 'ds1', the default framing is 'esf'. If tmnxDS1Type is set to 'e1', the default framing is 'g704'. Changing the value of tmnxDS1Framing resets the values of tmnxDS1BerSdThreshold and tmnxDS1BerSfThreshold to defaults and turns off reporting of berSd and berSf alarms in tmnxDS1ReportAlarm.
TMN tmnxDS1IdleCycleFlags	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.4	TmnxDSXIdleCycleFlags	read-create	tmnxDS1IdleCycleFlags configures the value that the DS1 channel transmits during idle cycle.
T/F tmnxDS1InRemoteLoop	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.19	TruthValue	read-only	tmnxDS1InRemoteLoop indicates whether the remote end has put this channel in remote loopback.
TMN tmnxDS1InsertSingleBitError	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.20	TmnxActionType	read-create	tmnxDS1InsertSingleBitError is used to insert a single bit error for a BERT test.
T/F tmnxDS1InvertData	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.6	TruthValue	read-create	Setting tmnxDS1InvertData to 'true' causes all data bits to be inverted, to guarantee ones density. It is typically used with AMI line encoding.
TIM tmnxDS1LastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.12	TimeStamp	read-only	The tmnxDS1LastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS1Entry row for this channel.
TMN tmnxDS1Loopback	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.5	TmnxDS1Loopback	read-create	tmnxDS1Loopback is used to put the channel into a loopback mode. The value of tmnxPortAdminStatus should be set to 'outOfService' in order for the loopback to be enabled. A 'line' loopback loops frames received on this port back to the remote system. A 'internal' loopback loops frames from the local system back at the framer. A 'fdlAnsi' requests loopback of type FDL ANSI T1.403. This is valid with tmnxDS1Framing set to 'esf' framing. A 'fdlBellcore' requests loopback of type FDL Bellcore TR-TSY-000312. This is valid with tmnxDS1Framing set to 'esf'. A 'inbandAnsi' requests loopback of type inband ANSI T1.403. This is valid with tmnxDS1Framing set to 'sf'.
INT tmnxDS1PortBuildout	1.3.6.1.4.1.6527.3.1.2.2.4.23.1.1	INTEGER	read-create	tmnxDS1PortBuildout configures the cable buildout length. A ds1 port has two settings for the DS1 cable buildout: a 'short' setting, for cable lengths of less than or equal to 655 feet, and a 'long' setting for cable lengths of greater than 655 feet. This object applies to copper-cable-based DS1 ports only.
I32 tmnxDS1PortDbGain	1.3.6.1.4.1.6527.3.1.2.2.4.23.1.6	Integer32	read-only	tmnxDS1PortDbGain only applies to a ds1 port configured with a 'long' buildout. tmnxDS1PortDbGain shows the number of decibels the received signal is increased to compensate for loss.
tmnxDS1PortEntry	1.3.6.1.4.1.6527.3.1.2.2.4.23.1		not-accessible	Each row entry represents a physical DS1 port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when the tmnxMDAAssignedType object is set to the DS1 MDA type The tmnxDS1PortEntry contains attributes that are unique to the 'ds1e1' TmnxPortType. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each tmnxDS1PortEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
TIM tmnxDS1PortLastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.23.1.2	TimeStamp	read-only	The tmnxDS1PortLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS1PortEntry row for this port.
INT tmnxDS1PortLbo	1.3.6.1.4.1.6527.3.1.2.2.4.23.1.5	INTEGER	read-create	tmnxDS1PortLbo configuration only applies to a ds1 port configured with a 'long' buildout. tmnxDS1PortLbo configures the number of decibels(dB) the transmission signal decreases over the line. For 'short' buildout the following values are valid: lboNotApplicable - Not applicable For 'long' buildout the following values are valid: lbo0dB - For 0 dB lboNeg7p5dB - For -7.5 dB lboNeg15p0dB - For -15.0 dB lboNeg22p5dB - For -22.5 dB The default for 'short' build out is 'lboNotApplicable' while the default for 'long' buildout is 'lbo0dB'
INT tmnxDS1PortLineLength	1.3.6.1.4.1.6527.3.1.2.2.4.23.1.4	INTEGER	read-create	tmnxDS1PortLineLength configuration only applies to a ds1 port configured with a 'short' buildout. tmnxDS1PortLineLength configures the length of the line (in feet). For line lengths longer than 655 feet configure the ds1 port buildout as 'long'. For 'long' buildout the following values are valid: lengthNotApplicable - Not applicable For 'short' buildout the following values are valid: length0To133 - For line length from 0 to 133 feet length134To266 - For line length from 134 to 266 feet length267To399 - For line length from 267 to 399 feet length400To533 - For line length from 400 to 533 feet length534To655 - For line length from 534 to 655 feet The default for 'long' buildout is 'lengthNotApplicable' while the default for 'short' buildout is 'length0To133'.
tmnxDS1PortTable	1.3.6.1.4.1.6527.3.1.2.2.4.23		not-accessible	The tmnxDS1PortTable has an entry for a DS1 physical port.
INT tmnxDS1PortType	1.3.6.1.4.1.6527.3.1.2.2.4.23.1.3	INTEGER	read-create	tmnxDS1PortType configures the type of the physical port to 'ds1', 'e1' or 'j1'.
T/F tmnxDS1RemoteLoopRespond	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.18	TruthValue	read-create	When tmnxDS1RemoteLoopRespond has a value of 'true', the channel is enabled to respond to remote loop signals. When it has a value of 'false' the port will not respond.
TMN tmnxDS1ReportAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.10	TmnxDSXReportAlarm	read-create	The value of tmnxDS1ReportAlarm determines when and if to generate notifications for this channel: ais - Reports alarm indication signal errors. ais alarms are issued by default. los - Reports loss of signal errors. los alarms are issued by default. oof - Reports out-of-frame errors. oof alarms are not issued by default. rai - Reports resource availability indicator events. rai alarms are not issued by default. looped - Reports if the far end has forced the near end to loopback. looped alarms are not issued by default. berSd - Reports DS1/E1/J1 signal degradation bit errors. berSd alarms are not issued by default. berSf - Reports DS1/E1/J1 signal failure bit errors. berSf alarms are not issued by default
TMN tmnxDS1ReportAlarmStatus	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.11	TmnxDSXReportAlarm	read-only	The value of tmnxDS1ReportAlarmStatus indicates the current alarms on this channel.
ROW tmnxDS1RowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.1	RowStatus	read-create	tmnxDS1RowStatus controls the creation and deletion of row entries in the tmnxDS1Table. For row creation, the manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme.
INT tmnxDS1SignalMode	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.21	INTEGER	read-create	The value of tmnxDS1SignalMode indicates the type of signalling associated with the channel: none - Indicates no signalling on this channel. cas - Indicates Channel Associated Signalling (CAS) on this channel. The default signalling is 'none'.
tmnxDS1Table	1.3.6.1.4.1.6527.3.1.2.2.4.12		not-accessible	The tmnxDS1Table has an entry for each DS1 channel.
INT tmnxDS1Type	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.2	INTEGER	read-only	The value of tmnxDS1Type indicates whether the DS1 channel is in DS1, E1 or J1 mode.
INT tmnxDS3Buildout	1.3.6.1.4.1.6527.3.1.2.2.4.10.1.1	INTEGER	read-create	tmnxDS3Buildout configures the T3 line buildout. A T3 port has two settings for the T3 line buildout: a short setting, which is less than 225 feet, and a long setting, which is greater than 225 feet. This object applies to copper-cable-based T3 ports only.
U32 tmnxDS3ChannelAcctPolicyId	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.36	Unsigned32	read-create	The value of tmnxDS3ChannelAcctPolicyId specifies an existing accounting policy to use for the ds3 channel. Accounting policies can only be associated with network ports or channels. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this channel. A zero value indicates that there is no accounting policy associated with this channel
U32 tmnxDS3ChannelBERTDuration	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.12	Unsigned32	read-create	tmnxDS3ChannelBERTDuration is used to set the duration of the BERT test.
C64 tmnxDS3ChannelBERTErrors	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.33	Counter64	read-only	tmnxDS3ChannelBERTErrors is the number of bit errors detected during the last BERT test. It is valid only after tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
TMN tmnxDS3ChannelBERTOperStatus	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.31	TmnxDSXBertOperStatus	read-only	tmnxDS3ChannelBERTOperStatus indicates the status of the BERT test as specified by TmnxDSXBertOperStatus.
TMN tmnxDS3ChannelBERTPattern	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.11	TmnxDSXBertPattern	read-create	tmnxDS3ChannelBERTPattern indicates the pattern used for the Bit Error Rate Test (BERT). The value of tmnxDS3ChannelBERTDuration indicates the duration of the test. Setting the value of this object to 'none' terminates the test.
U32 tmnxDS3ChannelBERTSynched	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.32	Unsigned32	read-only	tmnxDS3ChannelBERTSynched is the number of seconds for which the BERT hardware was synchronized. This will be less than or equal to the duration of the last BERT test. It is valid only after tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
C64 tmnxDS3ChannelBERTTotalBits	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.34	Counter64	read-only	tmnxDS3ChannelBERTTotalBits is the total number of bits received during the last BERT test. Bits are only counted when the BERT hardware is synchronized. It is valid only after tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
I32 tmnxDS3ChannelBitErrorInsertionRate	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.10	Integer32	read-create	tmnxDS3ChannelBitErrorInsertionRate is used to insert bit errors for a BERT test. The number of error corresponds to 10^(-rate). A rate of 7 will cause an error rate of 10^(-7), or 1 error in every 10 million bits transmitted. If the value is set to 0, it disables the insertion of bit errors into the BERT. Change in this value while the test is running is accepted but does not take effect until the test gets restarted.
INT tmnxDS3ChannelChannelized	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.5	INTEGER	read-create	tmnxDS3ChannelChannelized is used to create sub-channels of type 'ds1' or 'e1' or 'j1' on the interface. Setting the value to 'none' removes the sub-channels on the interface.
TMN tmnxDS3ChannelClockMasterPortId	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.39	TmnxPortID	read-only	The value of tmnxDS3ChannelClockMasterPortId indicates the current clock synchronization master port id if tmnxDS3ChannelClockSource is 'adaptive' or 'differential'.
TMN tmnxDS3ChannelClockSource	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.4	TmnxDSXClockSource	read-create	tmnxDS3ChannelClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed'), or from a clock recovered from the line's receive data stream ('loopTimed').
TMN tmnxDS3ChannelClockSyncState	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.38	TmnxDSXClockSyncState	read-only	The value of tmnxDS3ChannelClockSyncState indicates the current clock synchronization state if tmnxDS3ChannelClockSource is 'adaptive' or 'differential'.
T/F tmnxDS3ChannelCollectStats	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.37	TruthValue	read-create	The value of tmnxDS3ChannelCollectStats specifies whether or not the collection of accounting and statistical data for the network ds3 channel is collected. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPM will not obtain the results and write them to the billing file. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file.
INT tmnxDS3ChannelCRC	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.22	INTEGER	read-create	The value of tmnxDS3ChannelCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the error detection ability, but it also adds some performance overhead. For ATM channels, crc32 is the default and the only value supported and applies to AAL5 CRC calculation on that channel.
tmnxDS3ChannelEntry	1.3.6.1.4.1.6527.3.1.2.2.4.11.1		not-accessible	Each row entry represents a DS3 channel. Entries can be created and deleted via SNMP SET operations. The tmnxDS3ChannelEntry contains attributes that are applicable to a DS3 channel which can belong to the DS3 physical port or belong to a container on a sonet path. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each tmnxDS3ChannelEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
T/F tmnxDS3ChannelFEACLoopRespond	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.21	TruthValue	read-create	When tmnxDS3ChannelFEACLoopRespond has a value of 'true', the channel is enabled to respond to remote loop signals. When it has a value of 'false' the port will not respond.
INT tmnxDS3ChannelFraming	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.3	INTEGER	read-create	The value of tmnxDS3ChannelFraming indicates the type of framing associated with the DS3 channel. If tmnxDS3ChannelType is set to 'ds3', the default framing is 'cbit'. If tmnxDS3ChannelType is set to 'e3', the default framing is 'g751'.
TMN tmnxDS3ChannelIdleCycleFlags	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.8	TmnxDSXIdleCycleFlags	read-create	tmnxDS3ChannelIdleCycleFlags configures the value that the DS3 port transmits during idle cycle. The default value applies to HDLC channels only. For ATM channels the object does not really apply so a default value of 'none' is used and cannot be changed.
T/F tmnxDS3ChannelInFEACLoop	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.28	TruthValue	read-only	tmnxDS3ChannelInFEACLoop indicates whether the remote end has put this channel in FEAC(Far End Alarm Control) loopback.
TIM tmnxDS3ChannelLastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.27	TimeStamp	read-only	The tmnxDS3ChannelLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS3ChannelEntry row for this port.
TMN tmnxDS3ChannelLoopback	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.9	TmnxDS3Loopback	read-create	tmnxDS3ChannelLoopback is used to put the channel into a loopback mode. The value of tmnxPortAdminStatus should be set to 'outOfService' in order for the loopback to be enabled. A 'line' loopback loops frames received on this port back to the remote system. A 'internal' loopback loops the frames from the local system back at the framer. When the value is set to 'remote', a signal is sent to the remote system to provide a line loopback.
STR tmnxDS3ChannelMDLEicString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.13	DisplayString	read-create	tmnxDS3ChannelMDLEicString configures the Equipment ID Code(EIC) of the Message Data Link (MDL).
STR tmnxDS3ChannelMDLFicString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.15	DisplayString	read-create	tmnxDS3ChannelMDLFicString configures the Frame ID Code(FIC) of the Message Data Link (MDL).
STR tmnxDS3ChannelMDLGenString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.19	DisplayString	read-create	tmnxDS3ChannelMDLGenString configures the generator number string sent in the Message Data Link (MDL) test signal message.
STR tmnxDS3ChannelMDLLicString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.14	DisplayString	read-create	tmnxDS3ChannelMDLLicString configures the Location ID Code(LIC) of the Message Data Link (MDL).
BIT tmnxDS3ChannelMDLMessageType	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.20	Bits	read-create	tmnxDS3ChannelMDLMessageType configures the type of MDL message that is transmitted over the DS3 interface. If the value of this object is set to 'none', MDL messages are not transmitted. ds3Path(0) - Enables transmission of the MDL path message. An MDL path message, as defined by ANSI T1.107, is distinguished from idle and test signal messages in that it contains a facility identification code as its final data element. idleSignal(1) - Enables transmission of the MDL idle signal message. An MDL idle signal message, as defined by ANSI T1.107, is distinguished from path and test signal messages in that it contains a port number as its final data element. testSignal(2) - Enables transmission of the MDL test signal message. An MDL test signal message, as defined by ANSI T1.107, is distinguished from path and idle signal messages in that it contains a generator number as its final data element.
STR tmnxDS3ChannelMDLMonGenString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.30	DisplayString	read-only	tmnxDS3ChannelMDLMonGenString indicates the generator number string received in the Message Data Link (MDL) test signal message.
STR tmnxDS3ChannelMDLMonPortString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.29	DisplayString	read-only	tmnxDS3ChannelMDLMonPortString indicates the port number string received in the Message Data Link (MDL) idle signal message.
STR tmnxDS3ChannelMDLPfiString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.17	DisplayString	read-create	tmnxDS3ChannelMDLPfiString configures the Facility ID Code sent in the Message Data Link (MDL) Path message.
STR tmnxDS3ChannelMDLPortString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.18	DisplayString	read-create	tmnxDS3ChannelMDLPortString configures the port number string sent in the Message Data Link (MDL) idle signal message.
STR tmnxDS3ChannelMDLUnitString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.16	DisplayString	read-create	tmnxDS3ChannelMDLUnitString configures the Unit ID Code(UIC) of the Message Data Link (MDL).
U32 tmnxDS3ChannelMTU	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.23	Unsigned32	read-create	The size of the largest packet which can be sent/received on the port, specified in octets. For ports that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the sonet path. Setting tmnxDS3ChannelMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1522 with mode access and encap-type bcp-null 1526 with mode access and encap-type bcp-dot1q 1502 with mode access and encap-type ipcp 4474 with mode access and encap-type frame-relay 1524 with mode access and encap-type atm 2092 with mode access and encap-type cem
U32 tmnxDS3ChannelOperMTU	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.24	Unsigned32	read-only	The negotiated size of the largest packet which can be sent on the channel, specified in octets. For channels that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent.
TMN tmnxDS3ChannelReportAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.25	TmnxDSXReportAlarm	read-create	The value of tmnxDS3ChannelReportAlarm determines when and if to generate notifications for this channel: ais - Reports alarm indication signal errors. ais alarms are issued by default. los - Reports loss of signal errors. los alarms are issued by default. oof - Reports out-of-frame errors. oof alarms are not issued by default. rai - Reports resource availability indicator events. rai alarms are not issued by default. looped - Reports if the far end has forced the near end to loopback. looped alarms are not issued by default. berSd - Reports DS3/E3 signal degradation bit errors. berSd alarms are not issued by default. berSf - Reports DS3/E3 signal failure bit errors. berSf alarms are not issued by default
TMN tmnxDS3ChannelReportAlarmStatus	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.26	TmnxDSXReportAlarm	read-only	The value of tmnxDS3ChannelReportAlarmStatus indicates the current alarms on this port.
ROW tmnxDS3ChannelRowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.1	RowStatus	read-create	tmnxDS3ChannelRowStatus controls the creation and deletion of row entries in the tmnxDS3ChannelTable. For row creation, the manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme.
T/F tmnxDS3ChannelScramble	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.35	TruthValue	read-create	When tmnxDS3ChannelScramble indicates whether scrambling is enabled on this channel. Both ends of the connection must use the same scrambling algorithm. The default value is 'true' if the tmnxPortEncapType is atmEncap for this channel and indicates ATM payload scrambling; otherwise (tmnxPortEncapType is not atmEncap) the default is 'false' and can only be changed to true if the value of tmnxDS3ChannelSubrateCSUMode is digital-link (1)
U32 tmnxDS3ChannelSubrate	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.7	Unsigned32	read-create	tmnxDS3ChannelSubrate configures the subrate step. tmnxDS3ChannelSubrate multiplied by the granularity for a particular mode as defined by tmnxDS3ChannelSubrateCSUMode gives the absoulte subrate in kbps. ----------------------------------------------------------------------- Subrate CSU Mode\|Granularity\|Default \|Range \|Subrate speed range ----------------------------------------------------------`------------- notUsed \| N/A \| 0 \| 0 \|N/A digital-link \| 301 kbps \| 1 \| 1 to 147 \|301 kbps to 44.2 mbps -----------------------------------------------------------------------
INT tmnxDS3ChannelSubrateCSUMode	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.6	INTEGER	read-create	tmnxDS3ChannelSubrateCSUMode configures the channel service unit (CSU) compatibility mode to interoperate with existing DS3 subrate standards. This configuration applies only for a non-channelized DS3. Changing the value of tmnxDS3ChannelSubrateCSUMode to notUsed resets the value of tmnxDS3ChannelScramble to 'false'. Changing the value of tmnxDS3ChannelSubrateCSUMode resets the value of tmnxDS3ChannelSubrate to default for the mode if tmnxDS3ChannelSubrate is not provided.
tmnxDS3ChannelTable	1.3.6.1.4.1.6527.3.1.2.2.4.11		not-accessible	The tmnxDS3ChannelTable has an entry for a DS3 channel.
INT tmnxDS3ChannelType	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.2	INTEGER	read-only	The value of tmnxDS3ChannelType indicates whether the channel is in DS3 or E3 mode.
NTF tmnxDS3E3LoopbackStarted	1.3.6.1.4.1.6527.3.1.3.2.2.0.26			The tmnxDS3E3LoopbackStarted notification is generated when a loopback is provisioned on a DS3/E3 port.
NTF tmnxDS3E3LoopbackStopped	1.3.6.1.4.1.6527.3.1.3.2.2.0.27			The tmnxDS3E3LoopbackStopped notification is generated when a loopback is removed on a DS3/E3 port. The value of tmnxDS3ChannelLoopback specifies the type of loopback that was configured and has now been removed.
tmnxDS3Entry	1.3.6.1.4.1.6527.3.1.2.2.4.10.1		not-accessible	Each row entry represents a physical DS3 port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when the tmnxMDAAssignedType object is set to the DS3 MDA type The tmnxDS3Entry contains attributes that are unique to the 'ds3e3' TmnxPortType. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each tmnxDS3Entry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
TIM tmnxDS3LastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.10.1.2	TimeStamp	read-only	The tmnxDS3LastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS3Entry row for this port.
tmnxDS3Table	1.3.6.1.4.1.6527.3.1.2.2.4.10		not-accessible	The tmnxDS3Table has an entry for a DS3 physical port.
INT tmnxDS3Type	1.3.6.1.4.1.6527.3.1.2.2.4.10.1.3	INTEGER	read-create	tmnxDS3Type configures the type of the physical port to 'ds3' or 'e3'.
NTF tmnxEqDigitalDiagMonitorFailure	1.3.6.1.4.1.6527.3.1.3.2.2.0.35			Generated when an SFP/XFP that supports Digital Diagnostic Monitoring (DDM) enters a failed state.
NTF tmnxEqOobPortFailure	1.3.6.1.4.1.6527.3.1.3.2.2.0.1			Generated when the out-of-band Ethernet port has failed. On the Alcatel 7x50 SR system, the out-of-band port is the CPM management interface. This notification was made obsolete in the 2.1 release. The Out-of-band, OOB, port is what id refered to as the management port or cpm port. It has an entry in ifTable and linkup, linkDown and tmnxEqPortError notifications are sent for the management port just as for any other port in the system.
NTF tmnxEqPortBndlBadEndPtDiscr	1.3.6.1.4.1.6527.3.1.3.2.2.0.21			Generated when the port detected mismatched peer endpoint discriminator for the bundle.
NTF tmnxEqPortBndlRedDiffExceeded	1.3.6.1.4.1.6527.3.1.3.2.2.0.20			Generated when the differential delay of a port in the bundle exceeds the configured value in tmnxBundleRedDiffDelay.
NTF tmnxEqPortBndlYellowDiffExceeded	1.3.6.1.4.1.6527.3.1.3.2.2.0.19			Generated when the differential delay of a port in the bundle exceeds the configured value in tmnxBundleYellowDiffDelay.
NTF tmnxEqPortDS1Alarm	1.3.6.1.4.1.6527.3.1.3.2.2.0.17			Generated when a DS1 interface alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxDS1ReportAlarm.
NTF tmnxEqPortDS1AlarmClear	1.3.6.1.4.1.6527.3.1.3.2.2.0.18			Generated when a DS1 interface alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxDS1ReportAlarm.
NTF tmnxEqPortDS3Alarm	1.3.6.1.4.1.6527.3.1.3.2.2.0.15			Generated when a DS3 interface alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxDS3ChannelReportAlarm.
NTF tmnxEqPortDS3AlarmClear	1.3.6.1.4.1.6527.3.1.3.2.2.0.16			Generated when a DS3 interface alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxDS3ChannelReportAlarm.
NTF tmnxEqPortDuplexCfgNotCompatible	1.3.6.1.4.1.6527.3.1.3.2.2.0.33			Generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured duplex on an MDA port is not compatible with the inserted MDA.
NTF tmnxEqPortError	1.3.6.1.4.1.6527.3.1.3.2.2.0.14			Generated when an error listed in tmnxPortNotifyError is detected on the port.
NTF tmnxEqPortEtherAlarm	1.3.6.1.4.1.6527.3.1.3.2.2.0.22			tmnxEqPortEtherAlarm is generated when a ethernet port alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxPortEtherReportAlarm.
NTF tmnxEqPortEtherAlarmClear	1.3.6.1.4.1.6527.3.1.3.2.2.0.23			tmnxEqPortEtherAlarmClear is generated when a ethernet port alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxPortEtherReportAlarm.
NTF tmnxEqPortEtherLoopCleared	1.3.6.1.4.1.6527.3.1.3.2.2.0.31			The tmnxEqPortEtherLoopCleared notification is generated when down-when-looped detects an Ethernet port has stopped receiving PDUs that it transmitted and tmnxPortEtherDownWhenLoopedEnabled is set to 'true'. Setting tmnxPortEtherDownWhenLoopedEnabled to 'false' will also cause this notification to be generated if tmnxEqPortEtherLoopDetected had previously been raised.
NTF tmnxEqPortEtherLoopDetected	1.3.6.1.4.1.6527.3.1.3.2.2.0.30			The tmnxEqPortEtherLoopDetected notification is genereated when down-when-looped detects an Ethernet port is receiving PDUs that it transmitted and tmnxPortEtherDownWhenLoopedEnabled is set to 'true'.
NTF tmnxEqPortFailure	1.3.6.1.4.1.6527.3.1.3.2.2.0.2			Generated when a port has failed. This notification was made obsolete in the 2.1 release. tmnxEqPortError is used instead of tmnxEqPortFailure. Standard IETF linkDown notification is sent when a physical port failure is detected. tmnxEqPortError is sent with a ASCII reason message when port errors are detected. It was originally intended that tmnxEqPortError be used to report errors that do not cause port state change to 'down'. tmnxEqPortFailure was intended to report errors that do cause the port state change to 'down'. However, in the implementation tmnxEqPortError is used for both fatal and non-fatal errors.
NTF tmnxEqPortIngressRateCfgNotCompatible	1.3.6.1.4.1.6527.3.1.3.2.2.0.34			Generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured ingress rate on an MDA port is not compatible with the inserted MDA.
NTF tmnxEqPortSFPCorrupted	1.3.6.1.4.1.6527.3.1.3.2.2.0.11			Generated when SFP information stored in the EPROM on the SFP is corrupt. This notification was made obsolete for revision 6.0 on Alcatel 7x50 SR series systems; it was replaced by tmnxEqPortSFPStatusFailure.
NTF tmnxEqPortSFPInserted	1.3.6.1.4.1.6527.3.1.3.2.2.0.8			Generated when a SFP is inserted in the port.
NTF tmnxEqPortSFPRemoved	1.3.6.1.4.1.6527.3.1.3.2.2.0.9			Generated when a SFP is removed from the port.
NTF tmnxEqPortSFPStatusFailure	1.3.6.1.4.1.6527.3.1.3.2.2.0.36			Generated when the tmnxPortSFPStatus of an SFP/XFP results in a value other than 'not-equipped (0)', or 'operational (1)'. tmnxEqPortSFPStatusFailure obsoleted tmnxEqPortSFPCorrupted for revision 6.0 on Alcatel 7x50 SR series systems.
NTF tmnxEqPortSonetAlarm	1.3.6.1.4.1.6527.3.1.3.2.2.0.4			Generated when a SONET/SDH port alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxSonetReportAlarm.
NTF tmnxEqPortSonetAlarmClear	1.3.6.1.4.1.6527.3.1.3.2.2.0.5			Generated when a SONET/SDH port alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxSonetReportAlarm.
NTF tmnxEqPortSonetPathAlarm	1.3.6.1.4.1.6527.3.1.3.2.2.0.6			Generated when a SONET/SDH path alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxSonetPathReportAlarm.
NTF tmnxEqPortSonetPathAlarmClear	1.3.6.1.4.1.6527.3.1.3.2.2.0.7			Generated when a SONET/SDH path alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxSonetPathReportAlarm.
NTF tmnxEqPortSpeedCfgNotCompatible	1.3.6.1.4.1.6527.3.1.3.2.2.0.32			Generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured speed on an MDA port is not compatible with the inserted MDA.
NTF tmnxEqPortWrongSFP	1.3.6.1.4.1.6527.3.1.3.2.2.0.10			Generated when a wrong type of SFP optics module is plugged into a 1 Gig MDA, SONET MDA, or 100FX MDA. Because of the large variety of SFPs now supported and their different encoding schemes for compliance bits, the check for wrong SFP has been removed. As a result, tmnxEqPortWrongSFP notification is no longer generated. However, wrong SFP can be inferred from port statistics.
C32 tmnxFRDlcmiDiscardedMsgs	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.11	Counter32	read-only	tmnxFRDlcmiDiscardedMsgs indicates the number of times the LMI agent discarded a received message because it wasn't expecting it, the type of message was incorrect, or the contents of the message were invalid.
tmnxFRDlcmiEntry	1.3.6.1.4.1.6527.3.1.2.2.9.1.1		not-accessible	The Parameters for a particular Data Link Connection Management Interface. Entries cannot be created and deleted via SNMP SET operations.
C32 tmnxFRDlcmiInvRxSeqNumMsgs	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.12	Counter32	read-only	tmnxFRDlcmiInvRxSeqNumMsgs indicates the number of times the LMI agent received a message with an invalid receive sequence number: i.e. a sequence number that does not match the last transmitted sequence number of the agent.
INT tmnxFRDlcmiMode	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.1	INTEGER	read-write	tmnxFRDlcmiMode is used to set the mode of the interface. It can be set as Data terminal equipment (dte), Data circuit-terminating equipment (dce) or both as Data terminal equipment and Data circuit-terminating equipment (bidir).
INT tmnxFRDlcmiN392Dce	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.2	INTEGER	read-write	tmnxFRDlcmiN392Dce is used to configure the LMI error threshold for DCE interface.
INT tmnxFRDlcmiN393Dce	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.3	INTEGER	read-write	tmnxFRDlcmiN393Dce is used to configure the LMI monitored event count for DCE interface.
C32 tmnxFRDlcmiRxStatusEnqMsgs	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.6	Counter32	read-only	tmnxFRDlcmiRxStatusEnqMsgs indicates the number of LMI Status Enquiry messages received on this Frame Relay interface.
C32 tmnxFRDlcmiRxStatusMsgs	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.9	Counter32	read-only	tmnxFRDlcmiRxStatusMsgs indicates the number of LMI Status messages received on this Frame Relay interface.
C32 tmnxFRDlcmiStatusEnqMsgTimeouts	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.7	Counter32	read-only	tmnxFRDlcmiStatusEnqMsgTimeouts indicates the number of times the LMI agent did not receive a Status Enquiry message within the allotted time.
C32 tmnxFRDlcmiStatusMsgTimeouts	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.10	Counter32	read-only	tmnxFRDlcmiStatusMsgTimeouts indicates the number of times the LMI agent did not receive a Status message within the allotted time.
INT tmnxFRDlcmiT392Dce	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.4	INTEGER	read-write	tmnxFRDlcmiT392Dce is used to configure the polling verification timer for the Frame Relay DCE interface.
tmnxFRDlcmiTable	1.3.6.1.4.1.6527.3.1.2.2.9.1		not-accessible	The tmnxFRDlcmiTable has an entry for each port in the system that is configured for Frame Relay. It contains the parameters for the Data Link Connection Management Interface (DLCMI) for the frame relay service on this port.
C32 tmnxFRDlcmiTxStatusEnqMsgs	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.5	Counter32	read-only	tmnxFRDlcmiTxStatusEnqMsgs indicates the number of LMI Status Enquiry messages transmitted on this Frame Relay interface.
C32 tmnxFRDlcmiTxStatusMsgs	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.8	Counter32	read-only	tmnxFRDlcmiTxStatusMsgs indicates the number of LMI Status messages transmitted on this Frame Relay interface.
tmnxFRObjs	1.3.6.1.4.1.6527.3.1.2.2.9
T/F tmnxL4LoadBalancing	1.3.6.1.4.1.6527.3.1.2.2.4.19.1	TruthValue	read-write	The value of tmnxL4LoadBalancing specifies whether layer 4 information, src and dst ports, should be used in the LAG and ECMP hashing algorithm. This is the global system setting that all ports will inherit. When set to 'true', src and dst ports are used in the hashing algorithm. The per port setting of tmnxPortLoadBalanceAlgorithm can override tmnxL4LoadBalancing.
tmnxMcMlpppBundleGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.45			The group of objects supporting management of MClass MLPPP BUNDLES for revision 6.0 on the Alcatel 7x50 SR series systems.
TMN tmnxMcMlpppClassIndex	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.1	TmnxMcMlpppClassIndex	not-accessible	tmnxMcMlpppClassIndex serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxBundleBundleID, it uniquely identifies a class of a multiclass MLPPP bundle in the managed system.
C32 tmnxMcMlpppStatsEgressErrPkt	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.7	Counter32	read-only	The value of tmnxMcMlpppStatsEgressErrPkt indicates the total number of packets discarded due to segmentation errors on the bundle for the given class on egress.
C32 tmnxMcMlpppStatsEgressOct	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.5	Counter32	read-only	The value of tmnxMcMlpppStatsEgressOct indicates the total number of octets in all packets received on the bundle for the given class on egress before segmentation.
C32 tmnxMcMlpppStatsEgressPkt	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.6	Counter32	read-only	The value of tmnxMcMlpppStatsEgressPkt indicates the total number of packets forwarded on the bundle for the given class on egress towards the line.
tmnxMcMlpppStatsEntry	1.3.6.1.4.1.6527.3.1.2.2.12.4.1		not-accessible	Defines an entry in tmnxMcMlpppStatsTable. Entries are created and deleted by the system depending on the number of classes being used by a given MLPPP bundle.
C32 tmnxMcMlpppStatsIngressErrPkt	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.4	Counter32	read-only	The value of tmnxMcMlpppStatsIngressErrPkt indicates the total number of packets discarded due to reassembly errors on the bundle for the given class on ingress.
C32 tmnxMcMlpppStatsIngressOct	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.2	Counter32	read-only	The value of tmnxMcMlpppStatsIngressOct indicates the total number of octets in all packets received on the bundle for the given class on ingress before reassembly.
C32 tmnxMcMlpppStatsIngressPkt	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.3	Counter32	read-only	The value of tmnxMcMlpppStatsIngressPkt indicates the total number of packets forwarded on the bundle for the given class on ingress towards higher layer protocols.
tmnxMcMlpppStatsTable	1.3.6.1.4.1.6527.3.1.2.2.12.4		not-accessible	Defines the Alcatel 7x50 SR series Multiclass MLPPP statistics table for providing the capability of retrieving the traffic statistics for the physical queues being used for a class of a multiclass MLPPP bundle to forward the traffic.
tmnxMlBundleGroupV4v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.32			The group of objects supporting management MLBUNDLES for revision 4.0 on the Alcatel 7x50 SR series systems.
tmnxMlBundleGroupV5v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.40			The group of objects supporting management MLBUNDLES for revision 5.0 on the Alcatel 7x50 SR series systems.
tmnxMlBundleGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.48			The group of objects supporting management MLBUNDLES for revision 6.0 on the Alcatel 7x50 SR series systems.
tmnxMlBundleV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.27			The group of objects supporting management MLBUNDLES for revision 3.0 on the Alcatel 7x50 SR series systems.
tmnxMlImaBundleGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.33			The group of objects supporting management of Ima Groups and Members on the Alcatel 7x50 SR series systems.
tmnxMlpppBundleGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.49			The group of objects supporting management of MLPPP Bundles on the Alcatel 7x50 SR series systems.
tmnxNamedPoolGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.55			The group of objects supporting the Named Pool feature for revision 6.0 on Alcatel 7x50 SR series systems.
TNA tmnxObjectAppPool	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.4	TNamedItem	not-accessible	tmnxObjectAppPool specifies the name of the pool to be used/created.
ROW tmnxObjectAppPoolRowStatus	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.5	RowStatus	read-create	The object tmnxObjectAppPoolRowStatus is used to create or remove a pool application to the object.
I32 tmnxObjectAppPoolSize	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.8	Integer32	read-create	Size in percentage of buffer space. The value '-1' implies that the pool size should be computed as per fair weighing between all other pools.
I32 tmnxObjectAppResvCbs	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.6	Integer32	read-create	The percentage of pool size reserved for CBS. The value '-1' implies that the reserved CBS should be computed as the sum of the CBS requested by the entities using this pool if the application point is 'network'. For 'access' application points the value '-1' means a default of 30%.
TNA tmnxObjectAppSlopePolicy	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.7	TNamedItem	read-create	tmnxObjectAppSlopePolicy specifies the slope policy being used for this pool. The Slope policies define the nature of the RED Slopes for the high and the low priority traffic.
INT tmnxObjectAppType	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.3	INTEGER	not-accessible	The object tmnxObjectAppType specifies the nature of usage the pool would be used for. The pools could be used for access or network traffic at either ingress or egress.
TMN tmnxObjectId	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.2	TmnxPortID	not-accessible	tmnxObjectId is used to identify the specific object. If tmnxObjectType is 'mda', then the tmnxObjectId is encoded as a physical port with the port being '0'. For all other types the encoding is done as per the description of TmnxPortID.
INT tmnxObjectType	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.1	INTEGER	not-accessible	The object tmnxObjectType defines the type of object to which the pool is being setup for.
tmnxObsoleteGroupV3v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.28			The group of objects obsoleted in the 7x50 SR series 3.0 release
tmnxObsoleteGroupV5v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.36			The group of objects obsoleted in the 7x50 SR series 5.0 release
TMN tmnxPortAdminStatus	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.37	TmnxPortAdminStatus	read-write	The desired administrative status of this port.
TMN tmnxPortAlarmState	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.42	TmnxAlarmState	read-only	The value of tmnxPortAlarmState indicates the current alarm state for this port.
TNA tmnxPortAlias	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.7	TNamedItemOrEmpty	read-write	This object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. On the first instantiation of an interface, the value of tmnxPortAlias associated with that interface is the zero-length string. As and when a value is written into an instance of tmnxPortAlias through a network management set operation, then the agent must retain the supplied value in the tmnxPortAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system.
tmnxPortATMGroupV4v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.31			The group of objects supporting management of ATM interfaces for version 4.0 on Alcatel 7x50 SR series systems.
tmnxPortATMV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.23			The group of objects supporting management of ATM interfaces for version 3.0 on Alcatel 7x50 SR series systems.
INT tmnxPortBundleNumber	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.51	INTEGER	read-only	tmnxPortBundleNumber identifies the bundle for which this port is a member. If this port is not a member of any bundle, the value of tmnxPortBundleNumber will be zero.
tmnxPortCemGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.44			The group of objects supporting management of CEM encapsulation TDM type ports specific to the Alcatel 7750 and 7710 SR series systems for revision 6.0.
TMN tmnxPortChanType	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.53	TmnxMDAChanType	read-only	tmnxPortChanType is applicable only when the 'isSonet' and/or 'isTDM' bits in ALCATEL-IND1-TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. It indicates the type of the channel. For ports on Ethernet MDA's, the value of this object will be 'unknown'.
TMN tmnxPortClass	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.4	TmnxPortClass	read-only	The class of port or optical pack installed. This can be derived from tmnxPortType.
TMN tmnxPortClearAlarms	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.44	TmnxActionType	read-write	Setting this action variable causes all the alarms associated with this port to be moved from the current alarm log to the history alarm log. Primarily meant for use in development. This object will most likely be removed from the MIB before product release.
tmnxPortComp7450	1.3.6.1.4.1.6527.3.1.1.2.2.1.4
tmnxPortComp7450V4v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.4.2			The compliance statement for revision 4.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7450 SR series systems.
tmnxPortComp7450V5v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.4.3			The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7450 SR series systems.
tmnxPortComp7450V6v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.4.4			The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7450 SR series systems.
tmnxPortComp7710	1.3.6.1.4.1.6527.3.1.1.2.2.1.5
tmnxPortComp7710V3v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.5.1			The compliance statement for revision 3.0 of ALCATEL-IND1-TIMETRA-PORT-MIB.
tmnxPortComp7710V5v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.5.2			The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB.
tmnxPortComp7710V6v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.5.3			The compliance statement for revision 6.0 of ALCATEL-IND1-TIMETRA-PORT-MIB.
tmnxPortComp7750	1.3.6.1.4.1.6527.3.1.1.2.2.1.3
tmnxPortComp7750V4v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.3.2			The compliance statement for revision 4.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7750 SR series systems. tmnxMlImaBundleGroup was added as of R4.
tmnxPortComp7750V5v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.3.3			The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7750 SR series systems.
tmnxPortComp7750V6v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.3.4			The compliance statement for revision 6.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7750 SR series systems.
tmnxPortCompliances	1.3.6.1.4.1.6527.3.1.1.2.2.1
tmnxPortConformance	1.3.6.1.4.1.6527.3.1.1.2.2
TMN tmnxPortConnectorType	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.17	TmnxPortConnectorType	read-only	The type of connector installed on this port.
TIT tmnxPortConnectTypeDescription	1.3.6.1.4.1.6527.3.1.2.2.4.8.1.3	TItemDescription	read-only	A detailed description of this Alcatel 7x50 SR series port connector model.
tmnxPortConnectTypeEntry	1.3.6.1.4.1.6527.3.1.2.2.4.8.1		not-accessible	Each row entry represents an Alcatel 7x50 SR series port Connector model. Rows in this table are created by the agent at initialization and cannot be created or destroyed by SNMP Get or Set requests.
TMN tmnxPortConnectTypeIndex	1.3.6.1.4.1.6527.3.1.2.2.4.8.1.1	TmnxPortConnectorType	not-accessible	The unique index value which identifies this type of Alcatel 7x50 SR series port connector model.
TNA tmnxPortConnectTypeName	1.3.6.1.4.1.6527.3.1.2.2.4.8.1.2	TNamedItemOrEmpty	read-only	The administrative name that identifies this type of Alcatel 7x50 SR series port connector model. This name string may be used in CLI commands to specify a particular port connector model type.
T/F tmnxPortConnectTypeStatus	1.3.6.1.4.1.6527.3.1.2.2.4.8.1.4	TruthValue	read-only	When tmnxPortConnectTypeStatus has a value of 'true' it indicates that this port connector model is supported in this revision of the chassis management software. When it has a value of 'false' there is no support.
tmnxPortConnectTypeTable	1.3.6.1.4.1.6527.3.1.2.2.4.8		not-accessible	The Port Connector type table has an entry for each Alcatel 7x50 SR series port connector model.
T/F tmnxPortDDMEventSuppression	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.64	TruthValue	read-write	The value of tmnxPortDDMEventSuppression specifies whether or not an inserted SFP/XFP that supports Digital Diagnostic Monitoring raises traps and events (false) or suppresses all notifications (true).
TIT tmnxPortDescription	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.5	TItemLongDescription	read-write	A textual string containing user supplied information about the interface.
TNA tmnxPortEgrNamedPoolPlcy	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.61	TNamedItemOrEmpty	read-write	The value of tmnxPortEgrNamedPoolPlcy specifies a named pool policy associated with an port egress context. The policy governs the way named pools are created at the port level.
U32 tmnxPortEgrPoolPercentRate	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.63	Unsigned32	read-write	The value of tmnxPortEgrPoolPercentRate specifies increment or decrement of the active bandwidth associated with the egress port. This active bandwidth affects the amount of egress buffer space managed by the port.
TNA tmnxPortEgrPortSchedPlcy	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.57	TNamedItemOrEmpty	read-write	The value of tmnxPortEgrPortSchedPlcy specifies the egress QoS port-scheduler policy for this port. This object must correspond to the index of a row in ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyTable.
INT tmnxPortEncapType	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.12	INTEGER	read-write	The type of encapsulation protocol configured on this port's network interface. If tmnxPortEncapType has a value of 'nullEncap', frames received will not carry any tags or labels and as a result only one service can be configured on this port. Sometimes this is referred to as raw Ethernet packets. If tmnxPortEncapType has a value of 'qEncap', ingress frames carry 802.1q tags where each different tag can signify a different service. This is not a valid value if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'bcpNullEncap', Bcp is used on the sonet path as the NCP control protocol. The BCP IEEE 802 Tagged Frame Configuration Option (type 8) is negotiated to 'enabled'. VLAN tagged frames are allowed into the sonet path. Only a single SAP can be associated with the sonet path. 'bcpNullEncap' is valid only if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'bcpDot1qEncap', BCP is used as the NCP control protocol. The BCP IEEE 802 Tagged Frame Configuration Option (type 8) is negotiated to 'enabled'. VLAN tagged frames are allowed on the sonet path. This encapsulation type is required when multiple SAPs are defined on the sonet path where each one is service delimited by a provisioned Dot1q tag. When 'bcpDot1qEncap' is specified, BCP does not enter the 'open' state unless the far end peer also supports 'bcpDot1qEncap'. This allows a LCP negotiation to transmit configuration request and confirmation messages to enable this feature. 'bcpDot1qEncap' is a valid value only if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'ipcpEncap', BCP will not be used on this sonet path. IPCP NCP is used instead. 'ipcpEncap' is a valid only if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'frEncap', Frame Relay is the expected encapsulation. If tmnxPortEncapType has a value of 'pppAutoEncap', IPCP is automatically enabled. This encap type is only valid on ports/paths in network mode. If tmnxPortEncapType has a value of 'atmEncap', the encapsulation on the port is ATM. The 'atmEncap' is also used when mirroring ATM ports. If tmnxPortEncapType has a value of 'wanMirrorEncap', the port is used for mirroring of frame-relay and POS ports. On such ports no link management protocol would run. If tmnxPortEncapType has a value of 'ciscoHDLCEncap', the Cisco HDLC encapsulation is applied. This encap type is only valid if TmnxPortClass has a value of 'tdm' or 'sonet'. If tmnxPortEncapType has a value of 'cemEncap', encapsulation of frames will be circuit emulation. This is used to support transparent transmission of frames. This encap type is only valid if TmnxPortClass has a value of 'tdm' or 'sonet' in access mode. tmnxPortEncapType is set to 'unknown' for physical SONET/SDH and TDM ports.
tmnxPortEntry	1.3.6.1.4.1.6527.3.1.2.2.4.2.1		not-accessible	Each row entry represents a port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM tmnxMDAEntry can be deleted from the tmnxMDATable, its supported tmnxPortEntry rows must be in the proper state for removal.
T/F tmnxPortEquipped	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.35	TruthValue	read-only	Indicates if there is an optics pack installed in this port or not.
U32 tmnxPortEtherAcctPolicyId	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.7	Unsigned32	read-write	The value of the accounting policy must be defined prior to associating the policy with the ethernet port. Accounting policies can only be associated with network ports. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this port. A zero value indicates that there is no accounting policy associated with this port
INT tmnxPortEtherAutoNegotiate	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.4	INTEGER	read-write	When the value of tmnxPortEtherAutoNegotiate is 'true', the Ethernet interface will automatically negotiate link parameters with the far end (including speed and duplex), and will advertise all speeds and duplex modes supported by the interface. When the value of tmnxPortEtherAutoNegotiate is 'limited', the Ethernet interface will automatically negotiate link parameters with the far end, but will only advertise the speed and duplex mode specified by tmnxPortEtherSpeed and tmnxPortEtherDuplex. If tmnxPortEtherAutoNegotiate is 'false', the Ethernet interface won't negotiate link parameters with the far end and will instead force the speed and duplex mode to the values specified by tmnxPortEtherSpeed and tmnxPortEtherDuplex respectively.
T/F tmnxPortEtherCollectStats	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.8	TruthValue	read-write	Enable/disable the collection of accounting and statistical data for the network ethernet port. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPU will not obtain the results and write them to the billing file.
U32 tmnxPortEtherDot1qEtype	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.12	Unsigned32	read-write	The tmnxPortEtherDot1qEtype variable indicates the ethertype expected when the port's encapsulation type is dot1qEncap.
T/F tmnxPortEtherDownWhenLoopedEnabled	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.21	TruthValue	read-write	The value of tmnxPortEtherDownWhenLoopedEnabled specifies whether physical loop detection for the Ethernet port is enabled or disabled. When enabled, the port will periodically send out keep-alive PDUs with an EtherType of 0x9000. If the port receives a keep-alive that it transmitted, tmnxPortState will be set to 'linkUp' if it was previously 'up'. The port will not move back to tmnxPortState 'up' for a period of time defined by tmnxPortEtherDownWhenLoopedRetry, but will continue to periodically send out keep-alive PDUs. Every time the port receives a keep alive it sent while a loop has been detected, it will reset the time period that it will remain down as defined by tmnxPortEtherDownWhenLoopedRetry.
U32 tmnxPortEtherDownWhenLoopedKeepAlive	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.22	Unsigned32	read-write	The tmnxPortEtherDownWhenLoopedKeepAlive variable specifies the number of seconds between each keep alive PDU transmission.
U32 tmnxPortEtherDownWhenLoopedRetry	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.23	Unsigned32	read-write	The tmnxPortEtherDownWhenLoopedRetry variable specifies the minimum number of seconds the port should wait after detecting a loop before tmnxPortState can be set to 'up'. A value of 0 specifies the the port should not set tmnxPortState to 'up' until the user administratively disables and re-enables the port by setting tmnxPortAdminStatus to 'outOfService' and then to 'inService'.
INT tmnxPortEtherDownWhenLoopedState	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.24	INTEGER	read-only	The value of tmnxPortEtherDownWhenLoopedState indicates whether a physical loop has been detected on the port or not. If tmnxPortEtherDownWhenLoopedEnabled is set to 'false', this value will be 'noLoopDetected'.
INT tmnxPortEtherDuplex	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.2	INTEGER	read-write	The tmnxPortEtherDuplex variable specifies the duplex mode used by the Ethernet interface if tmnxPortEtherAutoNegotiate has a value of 'false' or 'limited'. If tmnxPortEtherAutoNegotiate has a value of 'true', the link parameters are negotiated with the far end and the tmnxPortEtherDuplex variable is ignored. A value of 'fullDuplex' sets the link to full duplex mode. A value of 'halfDuplex' sets the link to half duplex mode. tmnxPortEtherDuplex is only valid on Ethernet interfaces that support multiple duplex modes.
I32 tmnxPortEtherEgressRate	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.11	Integer32	read-write	The tmnxPortEtherEgressRate variable specifies the maximum egress bandwidth (in kilobits per second) that the Ethernet interface can generate. A value of -1 means that the limit is the actual physical limit. If the provisioned sub-rate bandwidth is larger than the actual physical bandwidth of the interface, the latter applies.
tmnxPortEtherEntry	1.3.6.1.4.1.6527.3.1.2.2.4.4.1		not-accessible	Each row entry represents an Ethernet port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM card entry can be deleted from the tmnxMDATable, its supported tmnxPortEntry and tmnxPortEtherEntry rows must be in the proper state for removal. The tmnxPortEtherEntry contains attributes that are unique to the Ethernet TmnxPortType.
C32 tmnxPortEtherHCOverPkts1519toMax	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.18	Counter32	read-only	The number of times the associated tmnxPortEtherPkts1519toMax counter has overflowed.
C64 tmnxPortEtherHCPkts1519toMax	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.19	Counter64	read-only	The total number of packets (including bad packets) received that were between 1519 octets in length and the maximum frame size, usually 12287 octets inclusive (excluding framing bits but including FCS octets). The lower 32-bits of this 64-bit counter will equal the value of tmnxPortEtherHCPkts1519toMax. The high 32-bits of this counter will equal the value of tmnxPortEtherHCOverPkts1519toMax.
I32 tmnxPortEtherIngressRate	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.14	Integer32	read-write	The tmnxPortEtherIngressRate variable specifies the maximum ingress bandwidth (in mega-bits per second) that the Ethernet interface can receive. A value of -1 means that the limit is the actual physical limit. If the provisioned sub-rate bandwidth is larger than the actual physical bandwidth of the interface, the latter applies.
T/F tmnxPortEtherLacpTunnel	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.20	TruthValue	read-write	The value of tmnxPortEtherLacpTunnel specifies whether the LACP packet tunneling for the ethernet port is enabled or disabled. When tunneling is enabled, the port will not process any LACP packets but will tunnel them through instead. Also, the port cannot be added as a member to a LAG group, and vice versa.
INT tmnxPortEtherMDIMDIX	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.9	INTEGER	read-only	The tmnxPortEtherMDIMDIX variable indicates whether the Ethernet interface is of type 'mdi' (Media Dependent Interface) or 'mdix' (Media Dependent Interface with crossover). If the agent cannot identify the type of Ethernet interface the value 'unknown (0)' is indicated. tmnxPortEtherMDIMDIX is only valid if tmnxPortClass is 'faste' or 'xcme'.
U32 tmnxPortEtherMTU	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.1	Unsigned32	read-write	The size of the largest packet which can be sent/received on the Ethernet physical interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface. Setting tmnxPortEtherMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1514 with mode access and encap-type null 1518 with mode access and encap-type dot1q 1518 with mode access and encap-type mpls 9198 with mode network
tmnxPortEthernetV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.29			The group of objects supporting management of Ethernet ports for revision 3.0 on Alcatel 7x50 SR series systems.
tmnxPortEthernetV5v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.38			The group of objects supporting management of Ethernet ports for revision 5.0 on Alcatel 7x50 SR series systems.
tmnxPortEthernetV6v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.47			The group of objects supporting management of Ethernet ports for revision 6.0 on Alcatel 7x50 SR series systems.
INT tmnxPortEtherOperDuplex	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.5	INTEGER	read-only	The tmnxPortEtherOperDuplex variable indicates the operational duplex mode of the Ethernet interface. A value of 'fullDuplex' indicates that the link is in full duplex mode. A value of 'halfDuplex' indicates that the link is in half duplex mode. tmnxPortEtherOperDuplex is only valid if tmnxPortClass is 'faste' or 'xcme'.
U32 tmnxPortEtherOperSpeed	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.6	Unsigned32	read-only	The tmnxPortEtherOperSpeed variable indicates the operational speed of the Ethernet interface in mega-bits per second (mbps). If the value of tmnxPortEtherAutoNegotiate is 'true', the link autonegotiates the link parameters with the far end side. The value of tmnxPortEtherOperSpeed is only valid if tmnxPortClass is one of the Ethernet classes.
U32 tmnxPortEtherPBBEtype	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.25	Unsigned32	read-write	The tmnxPortEtherPBBEtype variable indicates the Ethertype expected for Provider Backbone Bridging Frames.
C32 tmnxPortEtherPkts1519toMax	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.17	Counter32	read-only	The total number of packets received that were longer than 1518 octets but less than the maximum frame size for the particular medium, usually 12287 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
U32 tmnxPortEtherQinqEtype	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.13	Unsigned32	read-write	The tmnxPortEtherQinqEtype variable indicates the ethertype expected when the port's encapsulation type is qinqEncap.
BIT tmnxPortEtherReasonDownFlags	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.26	Bits	read-only	The tmnxPortEtherReasonDownFlags indicates why an ethernet port may be in the operationally 'down' state. The following reasons are detected through this object: unknown(0) - Unspecified (or unknown) linklossFwd(1) - A sap using this port has the object 'sapEthernetLLFOperStatus' set to 'fault'
TMN tmnxPortEtherReportAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.15	TmnxPortEtherReportStatus	read-write	The value of tmnxPortEtherReportAlarm determines when and if to generate tmnxEqPortEtherAlarm and tmnxEqPortEtherAlarmClear.
TMN tmnxPortEtherReportAlarmStatus	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.16	TmnxPortEtherReportStatus	read-only	The value of tmnxPortEtherReportAlarmStatus indicates the alarms on this port.
INT tmnxPortEtherSpeed	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.3	INTEGER	read-write	The tmnxPortEtherSpeed variable specifies the link speed of the Ethernet interface if tmnxPortEtherAutoNegotiate has a value of 'false' or 'limited'. If tmnxPortEtherAutoNegotiate has a value of 'true', the link parameters are negotiated with the far end and the tmnxPortEtherSpeed variable is ignored. A value of 'speed10' sets the link to 10 mbps. A value of 'speed100' sets the link to 100 mbps. A value of 'speed1000' sets the link to 1000 mbps (1 gbps). tmnxPortEtherSpeed is only valid on Ethernet interfaces that support multiple link speeds.
tmnxPortEtherTable	1.3.6.1.4.1.6527.3.1.2.2.4.4		not-accessible	The tmnxPortEtherTable has an entry for each Ethernet (faste, gige, xcme or xgige) port on each IOM card in each chassis in the TMNX system.
INT tmnxPortEtherXGigMode	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.10	INTEGER	read-write	The tmnxPortEtherXGigMode variable specifies whether the Ethernet interface is in LAN or WAN mode. tmnxPortEtherXGigMode must be 'notApplicable' if tmnxPortClass is not 'xgige'.
C64 tmnxPortFCStatsEgrDroInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.16	Counter64	read-only	The number of in-profile octets (rate below CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsEgrDroInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.14	Counter64	read-only	The number of in-profile packets (rate below CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsEgrDroOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.17	Counter64	read-only	The number of out-of-profile octets (rate above CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsEgrDroOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.15	Counter64	read-only	The number of out-of-profile packets (rate above CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsEgrFwdInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.12	Counter64	read-only	The number of in-profile octets (rate below CIR) forwarded by the egress Qchip.
C64 tmnxPortFCStatsEgrFwdInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.10	Counter64	read-only	The number of in-profile packets (rate below CIR) forwarded by the egress Qchip.
C64 tmnxPortFCStatsEgrFwdOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.13	Counter64	read-only	The number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.
C64 tmnxPortFCStatsEgrFwdOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.11	Counter64	read-only	The number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.
tmnxPortFCStatsEntry	1.3.6.1.4.1.6527.3.1.2.2.4.9.1		not-accessible	Each row entry represents a set of ingress and egress packet and octet statistics for the given network port and forwarding class. Rows in this table are created by the agent when the network port is provisioned and cannot be created or destroyed by SNMP Get or Set requests.
TFC tmnxPortFCStatsIndex	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.1	TFCName	not-accessible	The forwarding class associated with these stats on this network port.
C64 tmnxPortFCStatsIngDroInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.8	Counter64	read-only	The number of in-profile octets (rate below CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsIngDroInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.6	Counter64	read-only	The number of in-profile packets (rate below CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsIngDroOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.9	Counter64	read-only	The number of out-of-profile octets (rate above CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsIngDroOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.7	Counter64	read-only	The number of out-of-profile packets (rate above CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsIngFwdInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.4	Counter64	read-only	The number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.
C64 tmnxPortFCStatsIngFwdInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.2	Counter64	read-only	The number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.
C64 tmnxPortFCStatsIngFwdOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.5	Counter64	read-only	The number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.
C64 tmnxPortFCStatsIngFwdOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.3	Counter64	read-only	The number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.
tmnxPortFCStatsTable	1.3.6.1.4.1.6527.3.1.2.2.4.9		not-accessible	The Network Port FC Stats table has an entry for each forwarding class defined on each network port.
tmnxPortFRGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.5			The group of objects supporting management of Frame Relay DLCMI on Alcatel 7x50 SR series systems.
tmnxPortGroups	1.3.6.1.4.1.6527.3.1.1.2.2.2
tmnxPortGroupV4v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.35			The group of objects supporting management of physical port capabilities for revision 4.0 on Alcatel 7x50 SR series systems.
tmnxPortGroupV5v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.39			The group of objects supporting management of physical port capabilities for revision 5.0 on Alcatel 7x50 SR series systems.
tmnxPortGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.54			The group of objects supporting management of physical port capabilities for revision 6.0 on Alcatel 7x50 SR series systems.
U32 tmnxPortHoldTimeDown	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.15	Unsigned32	read-write	The value of tmnxPortHoldTimeDown is used to configure the hold-timer for link down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that a down transition is reported immediately. The value of tmnxPortHoldTimeDown is not applicable when tmnxPortClass has a value of 'sonet (5)'. In that case, tmnxSonetHoldTimeDown is used instead.
U32 tmnxPortHoldTimeUp	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.14	Unsigned32	read-write	The value of tmnxPortHoldTimeUp is used to configure the hold-timer for link up event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that an up transition is reported immediately. The value of tmnxPortHoldTimeUp is not applicable when tmnxPortClass has a value of 'sonet (5)'. In that case, tmnxSonetHoldTimeUp is used instead.
MAC tmnxPortHwMacAddress	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.10	MacAddress	read-only	The interface's hardware or system assigned MAC address at its protocol sub-layer. When tmnxPortUserAssignedMac has a value of 'true', the value of tmnxPortMacAddress is used instead of tmnxPortHwMacAddress. In the case of a pre-provisioned port that is not yet physically in the system, the MAC address may not be known. In this case a MAC address of all zeros is returned.
TNA tmnxPortIngNamedPoolPlcy	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.60	TNamedItemOrEmpty	read-write	The value of tmnxPortIngNamedPoolPlcy specifies a named pool policy associated with an port ingress context. The policy governs the way named pools are created at the port level.
U32 tmnxPortIngPoolPercentRate	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.62	Unsigned32	read-write	The value of tmnxPortIngPoolPercentRate specifies increment or decrement of the active bandwidth associated with the ingress port. This active bandwidth affects the amount of ingress buffer space managed by the port.
C64 tmnxPortIngrMdaQos00StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.2	Counter64	read-only	tmnxPortIngrMdaQos00StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos00StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.1	Counter64	read-only	tmnxPortIngrMdaQos00StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos01StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.4	Counter64	read-only	tmnxPortIngrMdaQos01StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos01StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.3	Counter64	read-only	tmnxPortIngrMdaQos01StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos02StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.6	Counter64	read-only	tmnxPortIngrMdaQos02StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos02StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.5	Counter64	read-only	tmnxPortIngrMdaQos02StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos03StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.8	Counter64	read-only	tmnxPortIngrMdaQos03StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos03StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.7	Counter64	read-only	tmnxPortIngrMdaQos03StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos04StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.10	Counter64	read-only	tmnxPortIngrMdaQos04StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos04StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.9	Counter64	read-only	tmnxPortIngrMdaQos04StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos05StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.12	Counter64	read-only	tmnxPortIngrMdaQos05StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos05StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.11	Counter64	read-only	tmnxPortIngrMdaQos05StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos06StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.14	Counter64	read-only	tmnxPortIngrMdaQos06StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos06StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.13	Counter64	read-only	tmnxPortIngrMdaQos06StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos07StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.16	Counter64	read-only	tmnxPortIngrMdaQos07StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos07StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.15	Counter64	read-only	tmnxPortIngrMdaQos07StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos08StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.18	Counter64	read-only	tmnxPortIngrMdaQos08StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos08StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.17	Counter64	read-only	tmnxPortIngrMdaQos08StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos09StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.20	Counter64	read-only	tmnxPortIngrMdaQos09StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos09StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.19	Counter64	read-only	tmnxPortIngrMdaQos09StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos10StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.22	Counter64	read-only	tmnxPortIngrMdaQos10StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos10StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.21	Counter64	read-only	tmnxPortIngrMdaQos10StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos11StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.24	Counter64	read-only	tmnxPortIngrMdaQos11StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos11StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.23	Counter64	read-only	tmnxPortIngrMdaQos11StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos12StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.26	Counter64	read-only	tmnxPortIngrMdaQos12StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos12StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.25	Counter64	read-only	tmnxPortIngrMdaQos12StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos13StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.28	Counter64	read-only	tmnxPortIngrMdaQos13StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos13StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.27	Counter64	read-only	tmnxPortIngrMdaQos13StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos14StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.30	Counter64	read-only	tmnxPortIngrMdaQos14StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos14StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.29	Counter64	read-only	tmnxPortIngrMdaQos14StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos15StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.32	Counter64	read-only	tmnxPortIngrMdaQos15StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos15StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.31	Counter64	read-only	tmnxPortIngrMdaQos15StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
tmnxPortIngrMdaQosStatEntry	1.3.6.1.4.1.6527.3.1.2.2.4.17.1		not-accessible	Each row entry indicates the MDA QoS discard statistics for an ethernet port located on an oversubscribed MDA. tmnxPortEtherIngressRate object in the tmnxPortEtherTable indicates the ingress rate configured for the port.
tmnxPortIngrMdaQosStatR2r1Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.14			The group of objects that describe the MDA QoS discard statistics for an ethernet port located on an oversubscribed MDA for revision 2.1 on Alcatel 7x50 SR series systems.
tmnxPortIngrMdaQosStatTable	1.3.6.1.4.1.6527.3.1.2.2.4.17		not-accessible	The table tmnxPortIngrMdaQosStatTable contains a row for each ethernet port located on an oversubscribed MDA.
T/F tmnxPortIsLeaf	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.52	TruthValue	read-only	tmnxPortIsLeaf is applicable only when the 'isSonet' and/or 'isTDM' bits in ALCATEL-IND1-TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. When the value of this object is 'true', it indicates that the channel is capable of passing traffic. The value of this object is 'false' for: 1. Physical ports on SONET/TDM MDA's 2. Intermediate channels on a channelized MDA 3. Leaf channels which belong to a bundle For ports on Ethernet MDA's or for LAG ports, the value of this object will be 'false'.
U32 tmnxPortLagId	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.13	Unsigned32	read-write	The value of tmnxPortLagId indicates which LAG or multi-link trunk (MLT) this port is assigned to. If this port is not associated with any LAG, this value will be set to zero(0). The maximum value of this object is '64', when the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5' (ESS-1/SR-1).
NUM tmnxPortLastAlarmEvent	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.43	RowPointer	read-only	The value of tmnxPortLastAlarmEvent is an object identifier whose object name and instance values point to the row entry in the ALARM-MIB that contains the most recent alarm event associated with this port. If the tmnxPortAlarmState has a value of 'alarmCleared', the most recent alarm event will be in the nlmAlarmClearedTable. If it has a value of 'alarmActive', the entry pointed to is in the nlmAlarmActiveTable. If the value of tmnxPortLastAlarmEvent is '0.0', then either there have not been any alarm events associated with this chassis since the system was last booted, or the last alarm event has aged out and its entry is no longer available in the ALARM-MIB tables.
TIM tmnxPortLastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.2	TimeStamp	read-only	The tmnxPortLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxPortEntry row for this port.
TIM tmnxPortLastClearedTime	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.58	TimeStamp	read-only	The value of tmnxPortLastClearedTime indicates the sysUpTime when the counters in the IF-MIB:ifTable were last cleared.
TIM tmnxPortLastStateChanged	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.48	TimeStamp	read-only	The tmnxPortLastStateChanged variable contains the value of the sysUpTime the last time the operational status of the port changed state.
T/F tmnxPortLinkStatus	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.36	TruthValue	read-only	Indicates whether or not the port has a physical link.
INT tmnxPortLoadBalanceAlgorithm	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.56	INTEGER	read-write	The value of tmnxPortLoadBalanceAlgorithm specifies the load balancing algorithm to be used on this port. When the value is 'includeL4', the src and dst port are used in the hashing algorithm. When it's 'excludeL4', they are not included. When the value is 'default', the port inherits the global settings in tmnxL4LoadBalancing. The value is 'notApplicable' for ports that do not pass any traffic. An attempt to modify this object when it is set to 'notApplicable' will return an inconsistentValue error.
MAC tmnxPortMacAddress	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.9	MacAddress	read-write	When tmnxPortUserAssignedMac has a value of 'true', tmnxPortMacAddress has the value that has been explicitly assigned by a SNMP SET request. When tmnxPortUserAssignedMac has a value of 'false', tmnxPortMacAddress returns the same value as tmnxPortMacAddress, the hardware or system assigned MAC address. When tmnxPortMacAddress is modified by a SET request, the agent sets tmnxPortUserAssignedMac to 'true'. Setting tmnxPortMacAddress to all zeros causes the agent to revert to using the default tmnxPortHwMacAddress and also to return tmnxPortUserAssignedMac as 'false'.
tmnxPortMIBModule	1.3.6.1.4.1.6527.1.1.3.25			This document is the SNMP MIB module to manage and provision the hardware components of the Alcatel 7x50 device. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
INT tmnxPortMode	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.11	INTEGER	read-write	The tmnxPortMode variable indicates if the interface on this port is configured as a service access port or a network access port. If the port mode equals 'access', and the tmnxMDAAssignedType is of ATM MDA family, then tmnxPortEncapType is automatically set to 'atmEncap'. If port mode equals 'access', tmnxPortEncapType must also be configured to 'qEncap' (For Ethernet MDAs) or to 'bcpNullEncap' for Sonet/SDH MDAs. Once the port's operation mode has been configured for 'access' mode, multiple services may be configured on the port. If the port mode equals 'network', tmnxPortEncapType must also be configured to 'nullEncap' (Ethernet MDAs), or 'pppAutoEncap' (Sonet/SDH MDAs) and tmnxPortEncapType is defaulted to those values on the mode change.
TNA tmnxPortName	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.6	TNamedItemOrEmpty	read-only	The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `le0' or 'sys171-2/1.
C64 tmnxPortNetEgressDroInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.8	Counter64	read-only	tmnxPortNetEgressDroInProfOcts indicates the number of conforming network egress octets dropped on this port using this queue.
C64 tmnxPortNetEgressDroInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.6	Counter64	read-only	tmnxPortNetEgressDroInProfPkts indicates the number of conforming network egress packets dropped on this port using this queue.
C64 tmnxPortNetEgressDroOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.9	Counter64	read-only	tmnxPortNetEgressDroOutProfOcts indicates the number of exceeding network egress octets dropped on this port using this queue.
C64 tmnxPortNetEgressDroOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.7	Counter64	read-only	tmnxPortNetEgressDroOutProfPkts indicates the number of exceeding network egress packets dropped on this port using this queue.
C64 tmnxPortNetEgressFwdInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.4	Counter64	read-only	tmnxPortNetEgressFwdInProfOcts indicates the number of conforming network egress octets forwarded on this port using this queue.
C64 tmnxPortNetEgressFwdInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.2	Counter64	read-only	tmnxPortNetEgressFwdInProfPkts indicates the number of conforming network egress packets forwarded on this port using this queue.
C64 tmnxPortNetEgressFwdOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.5	Counter64	read-only	tmnxPortNetEgressFwdOutProfOcts indicates the number of exceeding network egress octets forwarded on this port using this queue.
C64 tmnxPortNetEgressFwdOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.3	Counter64	read-only	tmnxPortNetEgressFwdOutProfPkts indicates the number of exceeding network egress packets forwarded on this port using this queue.
TQU tmnxPortNetEgressQueueIndex	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.1	TQueueId	not-accessible	tmnxPortNetEgressQueueIndex serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a network egress queue for the specified port in the managed system.
tmnxPortNetEgressStatsEntry	1.3.6.1.4.1.6527.3.1.2.2.12.2.1		not-accessible	Defines an entry in tmnxPortNetEgressStatsTable. Entries are created and deleted by the system depending on the queue policy being used at the specific port.
tmnxPortNetEgressStatsTable	1.3.6.1.4.1.6527.3.1.2.2.12.2		not-accessible	Defines the Alcatel 7x50 SR series network port egress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical queues being used for the ports to forward the network egress traffic.
C64 tmnxPortNetIngressDroInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.8	Counter64	read-only	tmnxPortNetIngressDroInProfOcts indicates the number of conforming network ingress octets dropped on this port using this queue.
C64 tmnxPortNetIngressDroInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.6	Counter64	read-only	tmnxPortNetIngressDroInProfPkts indicates the number of conforming network ingress packets dropped on this port using this queue.
C64 tmnxPortNetIngressDroOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.9	Counter64	read-only	tmnxPortNetIngressDroOutProfOcts indicates the number of exceeding network ingress octets dropped on this port using this queue.
C64 tmnxPortNetIngressDroOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.7	Counter64	read-only	tmnxPortNetIngressDroOutProfPkts indicates the number of exceeding network ingress packets dropped on this port using this queue.
C64 tmnxPortNetIngressFwdInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.4	Counter64	read-only	tmnxPortNetIngressFwdInProfOcts indicates the number of conforming network ingress octets forwarded on this port using this queue.
C64 tmnxPortNetIngressFwdInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.2	Counter64	read-only	tmnxPortNetIngressFwdInProfPkts indicates the number of conforming network ingress packets forwarded on this port using this queue.
C64 tmnxPortNetIngressFwdOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.5	Counter64	read-only	tmnxPortNetIngressFwdOutProfOcts indicates the number of exceeding network ingress octets forwarded on this port using this queue.
C64 tmnxPortNetIngressFwdOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.3	Counter64	read-only	tmnxPortNetIngressFwdOutProfPkts indicates the number of exceeding network ingress packets forwarded on this port using this queue.
TQU tmnxPortNetIngressQueueIndex	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.1	TQueueId	not-accessible	tmnxPortNetIngressQueueIndex serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a network ingress queue for the specified port in the managed system.
tmnxPortNetIngressStatsEntry	1.3.6.1.4.1.6527.3.1.2.2.12.1.1		not-accessible	Defines an entry in tmnxPortNetIngressStatsTable. Entries are created and deleted by the system depending on the queue policy being used at the specific port.
tmnxPortNetIngressStatsTable	1.3.6.1.4.1.6527.3.1.2.2.12.1		not-accessible	Defines the Alcatel 7x50 SR series network port ingress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical queues being used for the ports to forward the network ingress traffic.
TNA tmnxPortNetworkEgrQueues	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.50	TNamedItemOrEmpty	read-write	tmnxPortNetworkEgrQueues contains the network egress queue policy if the tmnxPortMode is network. Otherwise this object has no significance.
tmnxPortNotification	1.3.6.1.4.1.6527.3.1.3.2.2.0
tmnxPortNotificationGroupR2r1	1.3.6.1.4.1.6527.3.1.1.2.2.2.17			The group of notifications supporting the management of physical ports for revision 2.1 on Alcatel 7x50 SR series systems.
tmnxPortNotificationGroupV3v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.50			The group of notifications supporting the management of physical ports for revision 3.0 on Alcatel 7x50 SR series systems.
tmnxPortNotificationGroupV5v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.41			The group of notifications supporting the management of physical ports for revision 5.0 on Alcatel 7x50 SR series systems.
tmnxPortNotificationGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.46			The group of notifications supporting the management of physical ports for revision 6.0 on Alcatel 7x50 SR series systems.
tmnxPortNotificationObjects	1.3.6.1.4.1.6527.3.1.2.2.7
NTF tmnxPortNotifyBerSdTca	1.3.6.1.4.1.6527.3.1.3.2.2.0.12			Generated when a SONET/SDH port's signal degradation bit error rate is greater than the configured error rate threshold. This notification was made obsolete in the 2.1 release.
NTF tmnxPortNotifyBerSfTca	1.3.6.1.4.1.6527.3.1.3.2.2.0.13			Generated when a SONET/SDH port's signal failure bit error rate is greater than the configured error rate threshold. This notification was made obsolete in the 2.1 release.
TMN tmnxPortNotifyBundleId	1.3.6.1.4.1.6527.3.1.2.2.7.7	TmnxBundleID	accessible-for-notify	Used by tmnx bundle Notifications, the value indicates the bundle associated with the alarm.
INT tmnxPortNotifyDS1AlarmReason	1.3.6.1.4.1.6527.3.1.2.2.7.6	INTEGER	accessible-for-notify	Used by tmnx DS1 Port Notifications, the value of tmnxPortNotifyDS1AlarmReason indicates the reason a DS1 interface alarm has been raised.
INT tmnxPortNotifyDS3AlarmReason	1.3.6.1.4.1.6527.3.1.2.2.7.5	INTEGER	accessible-for-notify	Used by tmnx DS3 Port Notifications, the value of tmnxPortNotifyDS3AlarmReason indicates the reason a DS3 interface alarm has been raised.
INT tmnxPortNotifyError	1.3.6.1.4.1.6527.3.1.2.2.7.4	INTEGER	accessible-for-notify	Used by tmnxEqPortError notification, the value of tmnxPortNotifyError indicates the reason a port has an error.
TMN tmnxPortNotifyEtherAlarmReason	1.3.6.1.4.1.6527.3.1.2.2.7.8	TmnxPortEtherReportValue	accessible-for-notify	Used by tmnx ethernet Port Notifications, the value of tmnxPortNotifyEtherAlarmReason indicates the reason a ethernet port alarm has been raised.
tmnxPortNotifyObjsGroupR2r1	1.3.6.1.4.1.6527.3.1.1.2.2.2.18			The group of objects supporting physical port notifications for revision 2.1 on Alcatel 7x50 SR series systems.
tmnxPortNotifyObjsGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.57			The group of objects supporting physical port notifications for revision 6.0 on Alcatel 7x50 SR series systems.
tmnxPortNotifyObsoleteGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.20			The group of notifications supporting the management of physical ports made obsolete for revision 2.1 on Alcatel 7x50 SR series systems. tmnxEqPortSFPCorrupted was made obsolete for revision 6.0 on Alcatel 7x50 SR series systems.
TMN tmnxPortNotifyPortId	1.3.6.1.4.1.6527.3.1.2.2.7.1	TmnxPortID	accessible-for-notify	Used by tmnx port Notifications, the OID indicates the port or sonet path associated with the alarm.
tmnxPortNotifyPrefix	1.3.6.1.4.1.6527.3.1.3.2.2
INT tmnxPortNotifySonetAlarmReason	1.3.6.1.4.1.6527.3.1.2.2.7.2	INTEGER	accessible-for-notify	Used by tmnx sonet Port Notifications, the value of tmnxPortNotifySonetAlarmReason indicates the reason a sonet port alarm has been raised.
INT tmnxPortNotifySonetPathAlarmReason	1.3.6.1.4.1.6527.3.1.2.2.7.3	INTEGER	accessible-for-notify	Used by tmnx sonet path Notifications, the value of tmnxPortNotifySonetPathAlarmReason indicates the reason a sonet path alarm has been raised.
U32 tmnxPortNumAlarms	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.41	Unsigned32	read-only	The number of alarms currently outstanding on this port.
U32 tmnxPortNumChannels	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.49	Unsigned32	read-only	For SONET/SDH paths or TDM channels, tmnxPortNumChannels contains the number of possible immediate children. For leaf paths or channels, the value of this object will be zero. For SONET/SDH or TDM physical ports, tmnxPortNumChannels contains the total number of channels on the physical port. For all other entries in the tmnxPortTable, the value of this object will be zero.
tmnxPortObjs	1.3.6.1.4.1.6527.3.1.2.2.4
tmnxPortObsoleteGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.11			The group of objects in ALCATEL-IND1-TIMETRA-PORT-MIB which are obsoleted.
TMN tmnxPortOperStatus	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.38	TmnxPortOperStatus	read-only	The current operational status of this port.
OCT tmnxPortOpticalCompliance	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.55	OCTET STRING	read-only	tmnxPortOpticalCompliance is applicable only when the tmnxPortSFPEquipped is set to 'true'. The value of tmnxPortOpticalCompliance indicates the 8 bytes of optical compliance bits stored in SFP and XFP eeproms.
TMN tmnxPortParentPortID	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.54	TmnxPortID	read-only	tmnxPortParentPortID is applicable only when the 'isSonet' and/or 'isTDM' bits in ALCATEL-IND1-TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. For SONET or TDM channel, it indicates the port ID of its parent channel or port.
TMN tmnxPortPortID	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.1	TmnxPortID	not-accessible	tmnxPortPortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table.
TMN tmnxPortPrevState	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.40	TmnxPortState	read-only	The tmnxPortPrevState indicates the state level that the port transitioned from into the current tmnxPortState level.
tmnxPortScalarObjs	1.3.6.1.4.1.6527.3.1.2.2.4.19
tmnxPortSchedOverrideEntry	1.3.6.1.4.1.6527.3.1.2.2.4.24.1		not-accessible	Each row represents a particular port-scheduler override. Entries are created and deleted by the user.
BIT tmnxPortSchedOverrideFlags	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.21	Bits	read-create	The value of tmnxPortSchedOverrideFlags specifies the set of attributes whose values have been overridden via management on this port scheduler. Clearing a given flag will return the corresponding overridden attribute to the value defined in the port's port-scheduler policy.
TIM tmnxPortSchedOverrideLastChanged	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.3	TimeStamp	read-only	The value of tmnxPortSchedOverrideLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row.
TPO tmnxPortSchedOverrideLvl1CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.6	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl1CIR specifies the within-cir bandwidth limit for priority level 1. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl1CIR.
TPO tmnxPortSchedOverrideLvl1PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.5	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl1PIR specifies the total bandwidth limit, PIR, for priority level 1. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl1PIR.
TPO tmnxPortSchedOverrideLvl2CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.8	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl2CIR specifies the within-cir bandwidth limit for priority level 2. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl2CIR.
TPO tmnxPortSchedOverrideLvl2PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.7	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl2PIR specifies the total bandwidth limit, PIR, for priority level 2. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl2PIR.
TPO tmnxPortSchedOverrideLvl3CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.10	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl3CIR specifies the within-cir bandwidth limit for priority level 3. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl3CIR.
TPO tmnxPortSchedOverrideLvl3PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.9	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl3PIR specifies the total bandwidth limit, PIR, for priority level 3. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl3PIR.
TPO tmnxPortSchedOverrideLvl4CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.12	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl4CIR specifies the within-cir bandwidth limit for priority level 4. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl4CIR.
TPO tmnxPortSchedOverrideLvl4PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.11	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl4PIR specifies the total bandwidth limit, PIR, for priority level 4. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl4PIR.
TPO tmnxPortSchedOverrideLvl5CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.14	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl5CIR specifies the within-cir bandwidth limit for priority level 5. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl5CIR.
TPO tmnxPortSchedOverrideLvl5PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.13	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl5PIR specifies the total bandwidth limit, PIR, for priority level 5. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl5PIR.
TPO tmnxPortSchedOverrideLvl6CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.16	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl6CIR specifies the within-cir bandwidth limit for priority level 6. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl6CIR.
TPO tmnxPortSchedOverrideLvl6PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.15	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl6PIR specifies the total bandwidth limit, PIR, for priority level 6. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl6PIR.
TPO tmnxPortSchedOverrideLvl7CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.18	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl7CIR specifies the within-cir bandwidth limit for priority level 7. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl7CIR.
TPO tmnxPortSchedOverrideLvl7PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.17	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl7PIR specifies the total bandwidth limit, PIR, for priority level 7. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl7PIR.
TPO tmnxPortSchedOverrideLvl8CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.20	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl8CIR specifies the within-cir bandwidth limit for priority level 8. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl8CIR.
TPO tmnxPortSchedOverrideLvl8PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.19	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl8PIR specifies the total bandwidth limit, PIR, for priority level 8. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl8PIR.
TPO tmnxPortSchedOverrideMaxRate	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.4	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideMaxRate specifies the explicit maximum frame based bandwidth limit. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyMaxRate.
ROW tmnxPortSchedOverrideRowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.1	RowStatus	read-create	The value of tmnxPortSchedOverrideRowStatus is used for the creation and deletion of port-scheduler overrides. When tmnxPortEgrPortSchedPlcy of the tmnxPortEntry indexed by the same indices of this table is an empty string, creation will fail.
STR tmnxPortSchedOverrideSchedName	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.2	DisplayString	read-only	The value of tmnxPortSchedOverrideSchedName indicates the name of the port scheduler policy that this row entry overrides.
tmnxPortSchedOverrideTable	1.3.6.1.4.1.6527.3.1.2.2.4.24		not-accessible	The tmnxPortSchedOverrideTable has an entry for each port scheduler override configured on this system.
tmnxPortSchedV5v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.37			The group of objects supporting management of physical port virtual scheduler capabilities for revision 5.0 on Alcatel 7x50 SR series systems.
INT tmnxPortSFPConnectorCode	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.30	INTEGER	read-only	The external connector provided on the interface.
T/F tmnxPortSFPEquipped	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.34	TruthValue	read-only	Indicates if the SFP is equipped.
INT tmnxPortSFPMedia	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.33	INTEGER	read-only	The media supported for the SFP.
INT tmnxPortSFPStatus	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.65	INTEGER	read-only	The value of tmnxPortSFPStatus indicates the operational status of the inserted SFP/XFP. If tmnxPortSFPEquipped is false, the tmnxPortSFPStatus will be 'not-equipped (0)', otherwise 'operational (1)' if no failure is detected. A failure to read the SFP data will result in a 'read-error (2)', while corrupted information on the SFP will result in either 'data-corrupt (3)', or 'ddm-corrupt (4)' if an SFP read results in invalid data or DDM information respectively. An insertion of an unsupported SFP will result in 'unsupported (5)'. A trap will be raised if the value of tmnxPortSFPStatus indicates a failure; that is the tmnxPortSFPStatus is neither 'not-equipped (0)', nor 'operational (1)'.
DAT tmnxPortSFPVendorManufactureDate	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.32	DateAndTime	read-only	The vendor's date code.
U32 tmnxPortSFPVendorOUI	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.31	Unsigned32	read-only	The vendor organizationally unique identifier field (OUI) contains the IEEE company identifier for the vendor. A value of all zero indicates that the vendor OUI is unspecified.
TNA tmnxPortSFPVendorPartNum	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.46	TNamedItemOrEmpty	read-only	The vendor part number contains ASCII characters, defining the vendor part number or product name. A value of all zero indicates that the vendor PN is unspecified.
TNA tmnxPortSFPVendorSerialNum	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.45	TNamedItemOrEmpty	read-only	tmnxPortSFPVendorSerialNum contains ASCII characters, defining the vendor serial number. A value of all zero indicates that the vendor SN is unspecified.
tmnxPortSonetV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.21			The group of objects supporting management of SONET type ports for revision 3.0 on Alcatel 7x50 SR series systems.
TMN tmnxPortState	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.39	TmnxPortState	read-only	The state level of this port. A value of 'none' indicates the port is either in its initial creation state or is just about to be deleted. A value of 'ghost' represents a port that is not physically present. This state may represent a pre-provisioned port. A value of 'linkDown' represents a port that is physically present but does not have a link. The 'linkUp' state represents a port that is physically present and has physical link present. A port in 'up' state is ready to pass some kinds of traffic. The tmnxPortUpProtocols variable indicates the actual type(s) of traffic can be passed on this 'up' link.
tmnxPortStatsObjs	1.3.6.1.4.1.6527.3.1.2.2.12
tmnxPortStatsR2r1Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.16			The group of objects supporting port statistics for revision 2.1 on Alcatel 7x50 SR series systems.
tmnxPortTable	1.3.6.1.4.1.6527.3.1.2.2.4.2		not-accessible	The port table has an entry for each port on each IOM card in each chassis in the TMNX system.
TIM tmnxPortTableLastChange	1.3.6.1.4.1.6527.3.1.2.2.4.1	TimeStamp	read-only	The value of sysUpTime when the tmnxPortTable was last changed.
tmnxPortTDMGroupV4v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.30			The group of objects supporting management of TDM type ports for version 4.0 on the Alcatel 7x50 SR series systems.
tmnxPortTDMGroupV5v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.42			The group of objects supporting management of TDM type ports for version 5.0 on the Alcatel 7x50 SR series systems.
tmnxPortTDMGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.52			The group of objects supporting management of TDM type ports for version 6.0 on the Alcatel 7x50 SR series systems.
tmnxPortTDMV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.22			The group of objects supporting management of TDM type ports for revision 3.0 on the Alcatel 7x50 SR series systems.
INT tmnxPortTestAction	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.8	INTEGER	read-write	The operator sets this variable to perform the appropriate type of testing.
INT tmnxPortTestDuration	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.7	INTEGER	read-write	The number of seconds the port test is anticipated to last.
DAT tmnxPortTestEndTime	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.6	DateAndTime	read-only	The date and time the last test completed. Returns 0 if a test is in progress or no tests have yet to be run on this port.
tmnxPortTestEntry	1.3.6.1.4.1.6527.3.1.2.2.4.3.1		not-accessible	Each row entry represents a port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations.
tmnxPortTestGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.7			The group of objects supporting management of port testing on Alcatel 7x50 SR series system.
INT tmnxPortTestLastResult	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.4	INTEGER	read-only	The status of the last test executed on this port.
INT tmnxPortTestMode	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.2	INTEGER	read-write	The type of test to be executed on this port.
U32 tmnxPortTestParameter	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.3	Unsigned32	read-write	A parameter to be passed to the test program.
DAT tmnxPortTestStartTime	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.5	DateAndTime	read-only	The date and time the test started on this port. Returns 0 if tmnxPortTestState is notInTest.
INT tmnxPortTestState	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.1	INTEGER	read-only	The current testing status of this port.
tmnxPortTestTable	1.3.6.1.4.1.6527.3.1.2.2.4.3		not-accessible	The tmnxPortTestTable has an entry for each port on each IOM card in each chassis in the TMNX system.
tmnxPortToChannelEntry	1.3.6.1.4.1.6527.3.1.2.2.4.16.1		not-accessible	Each row represents a mapping of the physical port index and the channel index string to the index of the channel.
tmnxPortToChannelTable	1.3.6.1.4.1.6527.3.1.2.2.4.16		not-accessible	The tmnxPortToChannelTable is a mapping table. Given a chassis index, physical port index and channel string, it maps it to the index of the channel. This channel index can then be used as an index into the ifTable or the tmnxPortTable.
BIT tmnxPortTransceiverCode	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.26	Bits	read-only	The code for the transmission media. tmnxPortOpticalCompliance is used instead of tmnxPortTransceiverCode.tmnxPortOpticalCompliance contains the same information and is defined by an industry standard.
INT tmnxPortTransceiverDiagCapable	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.28	INTEGER	read-only	Indicates if the transceiver is capable of doing diagnostics.
U32 tmnxPortTransceiverLaserWaveLen	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.27	Unsigned32	read-only	The light wavelength transmitted by the transceiver's laser. A value of zero indicates that the port is not equipped with the transceiver.
TNA tmnxPortTransceiverModelNumber	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.29	TNamedItemOrEmpty	read-only	Model number of the transceiver.
INT tmnxPortTransceiverType	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.25	INTEGER	read-only	Type of the transceiver.
TMN tmnxPortType	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.3	TmnxPortType	read-only	The type of port or optical pack installed.
TIT tmnxPortTypeDescription	1.3.6.1.4.1.6527.3.1.2.2.4.7.1.3	TItemDescription	read-only	A detailed description of this Alcatel 7x50 SR series port model.
tmnxPortTypeEntry	1.3.6.1.4.1.6527.3.1.2.2.4.7.1		not-accessible	Each row entry represents an Alcatel 7x50 SR series port model. Rows in this table are created by the agent at initialization and cannot be created or destroyed by SNMP Get or Set requests.
TMN tmnxPortTypeIndex	1.3.6.1.4.1.6527.3.1.2.2.4.7.1.1	TmnxPortType	not-accessible	The unique index value which identifies this type of Alcatel 7x50 SR series port model.
TNA tmnxPortTypeName	1.3.6.1.4.1.6527.3.1.2.2.4.7.1.2	TNamedItemOrEmpty	read-only	The administrative name that identifies this type of Alcatel 7x50 SR series port model. This name string may be used in CLI commands to specify a particular Port model type.
T/F tmnxPortTypeStatus	1.3.6.1.4.1.6527.3.1.2.2.4.7.1.4	TruthValue	read-only	When tmnxPortTypeStatus has a value of 'true' it indicates that this port model is supported in this revision of the management software. When it has a value of 'false' there is no support.
tmnxPortTypeTable	1.3.6.1.4.1.6527.3.1.2.2.4.7		not-accessible	The Port type table has an entry for each Alcatel 7x50 SR series port model.
BIT tmnxPortUpProtocols	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.16	Bits	read-only	The tmnxPortUpProtocols variable is a bitmap that indicates what protocols can be used on this port type.
T/F tmnxPortUserAssignedMac	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.8	TruthValue	read-only	When tmnxPortUserAssignedMac has a value of 'true', the value of tmnxPortMacAddress has been explicitly assigned by a SNMP SET request. When tmnxPortUserAssignedMac is set to 'false', tmnxPortMacAddress returns the system assigned MAC address.
tmnxPortV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.25			The group of objects supporting management of physical port capabilities for revision 3.0 on Alcatel 7x50 SR series systems.
tmnxQosAppObjs	1.3.6.1.4.1.6527.3.1.2.2.10
tmnxQosAppObjsGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.6			The group of objects supporting management of Qos associations of the buffer pools to mdas, ports, channels and bundles on Alcatel 7x50 SR series systems.
tmnxQosPoolAppEntry	1.3.6.1.4.1.6527.3.1.2.2.10.2.1		not-accessible	This entry maintains the specifics about the association of a buffer pool and an object.
tmnxQosPoolAppTable	1.3.6.1.4.1.6527.3.1.2.2.10.2		not-accessible	This table maintains associations of the buffer pools with the individual objects.
NTF tmnxQosServiceDegraded	1.3.6.1.4.1.6527.3.1.3.2.2.0.3			Generated when the port is unable to provided the specified quality of service level.
tmnxScalarPortV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.24			The group of objects supporting management for general port settings for revision 3.0 on Alcatel 7x50 series systems.
T/F tmnxSonetAps	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.7	TruthValue	read-write	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
TMN tmnxSonetApsAdminStatus	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.8	TmnxPortAdminStatus	read-write	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
NUM tmnxSonetApsAdvertiseInterval	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.12	TimeInterval	read-write	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
NUM tmnxSonetApsAdvertiseTimeLeft	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.13	TimeInterval	read-only	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
OCT tmnxSonetApsAuthKey	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.10	OCTET STRING	read-write	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
NUM tmnxSonetApsHoldTime	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.14	TimeInterval	read-write	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
NUM tmnxSonetApsHoldTimeLeft	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.15	TimeInterval	read-only	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
IP tmnxSonetApsNeighborAddr	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.11	IpAddress	read-write	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
TMN tmnxSonetApsOperStatus	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.9	TmnxPortOperStatus	read-only	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
U32 tmnxSonetBerSdThreshold	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.5	Unsigned32	read-write	The value of tmnxSonetBerSdThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortSonetAlarm notification for a BER SD failure and tmnxEqPortSonetAlarmClear notification for a BER SD failure clear. tmnxSonetBerSdThreshold is the absolute value of the exponent of the rate expressed as 10e-n.
U32 tmnxSonetBerSfThreshold	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.6	Unsigned32	read-write	The value of tmnxSonetBerSfThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortSonetAlarm notification for a BER SF failure and tmnxEqPortSonetAlarmClear notification for a BER SF failure clear. tmnxSonetBerSdThreshold is the absolute value of the exponent of the rate expressed as 10e-n.
INT tmnxSonetClockSource	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.2	INTEGER	read-write	tmnxSonetClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed') or from a clock recovered from the line's receive data stream ('loopTimed').
tmnxSonetEntry	1.3.6.1.4.1.6527.3.1.2.2.4.5.1		not-accessible	Each row entry represents a packet over Sonet port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM tmnxMDAEntry can be deleted from the tmnxMDATable, its supported tmnxPortEntry rows must be in the proper state for removal. The tmnxSonetEntry contains attributes that are unique to the 'sonet' TmnxPortType. It also contains attributes that are common to all sonet paths configured on a sonet port. The tmnxPortPortID for a sonet port includes a sonet path number in the lower bits. If the sonet path number is zero, '0', it represents a single (clear) sonet path on the port that uses the full bandwidth of the sonet port. All entries in this table have the sonet path number part of their tmnxPortPortID index value set to zero.
INT tmnxSonetFraming	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.3	INTEGER	read-write	The value of tmnxSonetFraming indicates the type of framing used on this interface.
TMN tmnxSonetGroupChildType	1.3.6.1.4.1.6527.3.1.2.2.4.18.1.3	TmnxMDAChanType	read-write	tmnxSonetGroupChildType is used to configure the type of the children of this group. Based on the value of this object, entries of a certain channel type can be created in the tmnxSonetPathTable. For example, if the value of this object is set to 'sonetVt15', then 28 entries of type 'sonetVt15' can be created in the tmnxSonetPathTable.
tmnxSonetGroupEntry	1.3.6.1.4.1.6527.3.1.2.2.4.18.1		not-accessible	Each row entry represents a Tributary Unit Group(TUG3) on a path.
TNA tmnxSonetGroupName	1.3.6.1.4.1.6527.3.1.2.2.4.18.1.4	TNamedItemOrEmpty	read-only	tmnxSonetGroupName is the textual name for this sonet group.
TMN tmnxSonetGroupParentPortID	1.3.6.1.4.1.6527.3.1.2.2.4.18.1.2	TmnxPortID	read-only	tmnxSonetGroupParentPortID indicates the TmnxPortID of the parent of this group.
tmnxSonetGroupTable	1.3.6.1.4.1.6527.3.1.2.2.4.18		not-accessible	The tmnxSonetGroupTable has an entry for each Tributary Unit Group(TUG3) on a path. On a port which supports unchannelized STS-3's, rows in this table are created when a channelized STS-3 has its tmnxSonetPathChildType set to sdhTug3. On a port which does not support unchannelized STS-3's, the rows in this table are implicitly created when a STS-3 is created in the tmnxSonetPathTable. Entries in this table are implicitly deleted when the parent entry of this group is deleted from the tmnxSonetPathTable or if the tmnxSonetPathChildType of the parent is set to something other than sdhTug3.
TMN tmnxSonetGroupType	1.3.6.1.4.1.6527.3.1.2.2.4.18.1.1	TmnxMDAChanType	read-only	tmnxSonetGroupType indicates the sonet group type of this entry. For STS-3/STM-1 channelization, the value of this object will be 'sdhTug3'.
U32 tmnxSonetHoldTimeDown	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.26	Unsigned32	read-write	The value of tmnxSonetHoldTimeDown is used to configure the hold-timer for link down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that a down transition is reported immediately.
U32 tmnxSonetHoldTimeUp	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.25	Unsigned32	read-write	The value of tmnxSonetHoldTimeUp is used to configure the hold-timer for link up event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that an up transition is reported immediately.
OCT tmnxSonetJ0String	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.19	OCTET STRING	read-write	The tmnxSonetJ0String is used with the tmnxSonetSectionTraceMode variable to determine the contents of the j0 byte in the SONET Section Header. If the tmnxSonetSectionTraceMode is increment-z0, this object is ignored. If the mode is byte, then the first octet of this object is used for the J0 byte. If the mode is string, then the 16 bytes in this object are used for the J0 byte. If set to less than 16 bytes it, will be padded out to 16 with zeros. The default value is 0x01 and 15 NULLs
INT tmnxSonetLoopback	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.16	INTEGER	read-write	Activate a loopback on the SONET port. The SONET port must be in a shutdown state to activate any type of loopback.
OCT tmnxSonetMonJ0String	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.21	OCTET STRING	read-only	The tmnxSonetMonJ0String variable reports the contents of the j0 byte in the SONET Section Header.
U32 tmnxSonetMonK1Byte	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.22	Unsigned32	read-only	The tmnxSonetMonK1Byte variable reports the Automatic Protection Switching(APS) signalling status from the K1 byte in the SONET Line Overhead Header.
U32 tmnxSonetMonK2Byte	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.23	Unsigned32	read-only	The tmnxSonetMonK1Byte variable reports the Automatic Protection Switching(APS) signalling status from the K2 byte in the SONET Line Overhead Header.
U32 tmnxSonetMonS1Byte	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.20	Unsigned32	read-only	The tmnxSonetMonS1Byte variable reports the Synchronization Status Message from the S1 byte in the Line Overhead Header. A value of 0x00 indicates unknown quality. A value of 0xF0 indicates `Do not use for synchronization`. Other values are documented in Tellcordia GR253 and ITU G.707
U32 tmnxSonetPathAcctPolicyId	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.11	Unsigned32	read-create	The value of the accounting policy must be defined prior to associating the policy with the sonet path. Accounting policies can only be associated with network sonet path. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this port. A zero value indicates that there is no accounting policy associated with this port
U32 tmnxSonetPathC2Byte	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.5	Unsigned32	read-create	The tmnxSonetPathC2Byte variable is used configure the value used in the SONET/SDH C2 header byte. For paths on an MDA that does not support channelization: Setting C2 equal to 0x16 indicates scrambled sonet. Setting C2 equal to 0xCF indicates unscrambled sonet. Setting C2 equal to 0x13 indicates ATM. For paths on an MDA that supports channelization, the default value is based on the value of tmnxMDAMaxChannelization. For 'pdhDs3' or 'pdhE3' channelization, the default value is 0x04. Setting tmnxSonetPathC2Byte to a value of zero(0) causes the agent to assign the default value to this object.
TMN tmnxSonetPathChildType	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.17	TmnxMDAChanType	read-create	tmnxSonetPathChildType is used to configure the type of this path. Some typical default values are: pdhDs3 for STS-1 paths pdhE3 for TU3 paths pdhE1 for VT2 paths pdhDs1 for VT15 paths Examples of valid child path types are sonetSts3, sdhTug3, pdhDs3, pdhE3, sonetVt15, sonetVt2, pdhDs1 and pdhE1.
T/F tmnxSonetPathCollectStats	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.12	TruthValue	read-create	Enable/disable the collection of accounting and statistical data for the network sonet path. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPU will not obtain the results and write them to the billing file.
INT tmnxSonetPathCRC	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.7	INTEGER	read-create	The value of tmnxSonetPathCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the error detection ability, but it also adds some performance overhead. For paths with encapsulation set to ATM the default and only supported value is crc32 and applies to AAL5 CRC calculations on that path.
tmnxSonetPathEntry	1.3.6.1.4.1.6527.3.1.2.2.4.6.1		not-accessible	Each row entry represents a configured sonet path in a packet over Sonet port on a IOM card in a chassis in the system. The tmnxSonetPathEntry contains attributes that are unique to a sonet path of a 'sonet' TmnxPortType. The tmnxPortPortID for a sonet port includes a sonet path number in the lower bits. If the sonet path number is zero, '0', it represents a single (clear) sonet path on the port that uses the full bandwidth of the sonet port. Entries in this table that have the sonet path number part of their tmnxPortPortID index value set to zero cannot be created and deleted via SNMP SET operations. They are created by the SNMP agent when the corresponding entry in the tmnxSonetTable is created. Entries with non-zero sonet path numbers can be created and deleted via SNMP SET operations using tmnxSonetPathRowStatus. When a row is created in the tmnxSonetPathTable, the agent also creates a row with the same index values in the tmnxPortTable. In order to delete an entry, tmnxPortAdminStatus must first be set to 'outOfService'. When the tmnxSonetPathEntry is deleted, the agent also deletes the corresponding row in the tmnxPortTable.
OCT tmnxSonetPathJ1String	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.6	OCTET STRING	read-create	The tmnxSonetPathJ1String variable is used to configure the sonet path trace string to be sent in the J1 Path Overhead bytes. The bytes must be printable ASCII. If the string is less than 62 bytes, it will be padded with NULLs. For SONET framing, an additional CR (0x0D) / LF (0x0A) pair will be added by the driver. For SDH framing only 16 bytes are sent in the J1 bytes. The driver will set the MSB of the first byte, and put the first 15 bytes of the user configured string as the following bytes. The driver will set the CRC-7 of the 16 bytes into the other 7 bits of the first byte. The default value is `Alcatel 7x50 SR`. Setting a 1-byte long string containing 0xFF will restore the default. Setting the string 'zeros' will send all-zeros (ASCII NULL characters without CR/LF or CRC-7)in the J1 bytes.
TIM tmnxSonetPathLastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.2	TimeStamp	read-only	The tmnxSonetPathLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxSonetPathEntry row for this sonet path.
U32 tmnxSonetPathMonC2Byte	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.14	Unsigned32	read-only	The tmnxSonetPathC2Byte variable reports the value in the SONET/SDH C2 header byte.
OCT tmnxSonetPathMonJ1String	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.15	OCTET STRING	read-only	The tmnxSonetPathJ1String variable reports the sonet path trace string received in the J1 Path Overhead bytes.
U32 tmnxSonetPathMTU	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.3	Unsigned32	read-create	The size of the largest packet which can be sent/received on the sonet path, specified in octets. For paths that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the sonet path. Setting tmnxSonetPathMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1522 with mode access and encap-type bcp-null 1526 with mode access and encap-type bcp-dot1q 1502 with mode access and encap-type ipcp 1506 with mode access and encap-type mplscp 1524 with mode access and encap-type atm 9208 with mode network
U32 tmnxSonetPathOperMRU	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.9	Unsigned32	read-only	The negotiated size of the largest packet that can be received on the sonet path, specified in octets.
U32 tmnxSonetPathOperMTU	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.8	Unsigned32	read-only	The negotiated size of the largest packet which can be sent on the sonet path, specified in octets. For sonet paths that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the sonet path.
BIT tmnxSonetPathReportAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.10	Bits	read-create	The value of tmnxSonetPathReportAlarm determines when and if to generate tmnxEqPortSonetPathAlarm and tmnxEqPortSonetPathAlarmClear notifications for this port: pais(1) Reports path alarm indication signal errors. Not set by default. plop(2) Reports path loss of pointer (per tributary) errors. Set by default. prdi(3) Reports path remote defect indication errors. Not set by default. pb3err(4) Reports path B3 errors. Not set by default. pplm(5) Reports a path payload mismatch. As a result the path will be operationally downed. Set by default. prei(6) Reports a path error condition raised by the remote as a result of B3 errors received from this node. Not set by default. puneq(7) Reports unequipped path errors. Set by default. plcd(8) Reports path loss of codegroup delineation error. It is applicable only when the value of tmnxPortEtherXGigMode is set to 'wan'. Not set by default.
BIT tmnxSonetPathReportAlarmStatus	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.13	Bits	read-only	The bits in this object are used for indicating the alarms. The bits are explained as follows: pais(1) Indicates path alarm indication signal errors. plop(2) Indicates path loss of pointer (per tributary) errors. prdi(3) Indicates path remote defect indication errors. pb3err(4) Indicates path B3 errors. pplm(5) Indicates a path payload mismatch. prei(6) Indicates a path error condition raised by the remote as a result of B3 errors received from this node. puneq(7) Indicates a far-end unequipped error. plcd(8) Indicates a path loss of codegroup delineation error. It is applicable only when the value of tmnxPortEtherXGigMode is set to 'wan'. Not set by default.
ROW tmnxSonetPathRowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.1	RowStatus	read-create	tmnxSonetPathRowStatus controls the creation and deletion of row entries in the tmnxSonetPathTable. The tmnxPortPortID for a sonet port includes a sonet path number in the lower bits. If the sonet path number is zero, '0', it represents a single (clear) sonet path on the port that uses the full bandwidth of the sonet port. Entries in this table that have the sonet path number part of their tmnxPortPortID index value set to zero cannot be created and deleted via SNMP SET operations. They are created by the SNMP agent when the corresponding entry in the tmnxSonetTable is created. Entries with non-zero sonet path numbers can be created and deleted via SNMP SET operations. When a row is created in the tmnxSonetPathTable, the agent also creates a row with the same index values in the tmnxPortTable. In order to delete an entry, tmnxPortAdminStatus must first be set to 'outOfService'. When the tmnxSonetPathEntry is deleted, the agent also deletes the corresponding row in the tmnxPortTable for this sonet path port.
T/F tmnxSonetPathScramble	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.4	TruthValue	read-create	If the tmnxSonetPathScramble variable is set to 'true', SONET (SDH) payload scrambling is enabled on this sonet path. Both ends of the connection must use the same scrambling algorithm. If tmnxSonetPathScramble is set to 'false', scrambling is disabled. The default value for non-ATM paths is 'false'. The default value for ATM paths is 'true' If the value of tmnxSonetPathC2Byte is set to the default for the currently configured tmnxSonetPathScramble, then changing the value of tmnxSonetPathScramble for non-ATM paths causes a change to tmnxSonetPathC2Byte to a default value for a new scrambling option. The default values are as follows: scrambled non-ATM sonet/sdh path - C2 Byte value is 0x16 unscrambled non-ATM sonet/sdh path - C2 Byte value is 0xCF
tmnxSonetPathTable	1.3.6.1.4.1.6527.3.1.2.2.4.6		not-accessible	The tmnxSonetPathTable has an entry for each sonet path configured in each packet over Sonet port on each IOM card in each chassis in the TMNX system.
INT tmnxSonetPathType	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.16	INTEGER	read-create	tmnxSonetPathType specifies if the associated SONET/SDH Path is an asynchronous circuit, a virtual tributary group or a tributary unit group. ds3 - Configures the port or channel as service access(ds3) e3 - Configures the port or channel as service access(e3) vtg - Configures the path as a virtual tributary group. tug-2 - Configures the path as a tributary unit group. tug-3 - Configures the port or channel for transport network use.
BIT tmnxSonetReportAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.4	Bits	read-write	The value of tmnxSonetReportAlarm determines when and if to generate tmnxEqPortSonetAlarm and tmnxEqPortSonetAlarmClear notifications for this port: loc(1) Reports a loss of clock which causes the operational state of the port to be downed. Set by default. lais(2) Reports line alarm indication signal errors. Not set by default. lrdi(3) Reports line remote defect initiation errors. LRDIs are caused by remote LOF, LOC, and LOS. Set by default. ss1f(4) Reports section synchronization failure as reported by the S1 byte. Not set by default. sb1err(5) Reports section B1 errors. Not set by default. lb2erSd(6) Reports line signal degradation BER errors. Not set by default. lb2erSf(7) Reports line signal failure BER errors. Set by default. slof(8) Reports section loss of frame errors. Set by default slos(9) Reports section loss of signal errors. Set by default. stxptr(10) Reports a section synchronization error on the transmit side. Indicates if there is a positive or negative justification count per channel. Not set by default. srxptr(11) Reports a section synchronization error on the receive side. Indicates if there is a positive or negative justification count per path. Not set by default. lrei(12) Reports a line error condition raised by the remote as a result of B1 errors received from this node. Not set by default.
BIT tmnxSonetReportAlarmStatus	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.17	Bits	read-only	The bits in this object are used for indicating the alarms. The bits are explained as follows: loc(1) Indicates a loss of clock which causes the operational state of the port to be downed. lais(2) Indicates line alarm indication signal errors. lrdi(3) Indicates line remote defect indication errors. LRDIs are caused by remote LOF, LOC, and LOS. ss1f(4) Indicates section synchronization failure as reported by the S1 byte. sb1err(5) Indicates section B1 errors. lb2erSd(6) Indicates line signal degradation BER errors. lb2erSf(7) Indicates line signal failure BER errors. slof(8) Indicates section loss of frame errors. slos(9) Indicates section loss of signal errors. stxptr(10) Indicates a section synchronization error on the transmit side. Indicates if there is a positive or negative justification count per channel. srxptr(11) Indicates a section synchronization error on the receive side. Indicates if there is a positive or negative justification count per sonet path. lrei(12) Indicates a line error condition raised by the remote as a result of B1 errors received from this node.
NTF tmnxSonetSDHLoopbackStarted	1.3.6.1.4.1.6527.3.1.3.2.2.0.28			The tmnxSonetSDHLoopbackStarted notification is generated when a loopback is provisioned on a Sonet-SDH port.
NTF tmnxSonetSDHLoopbackStopped	1.3.6.1.4.1.6527.3.1.3.2.2.0.29			The tmnxSonetSDHLoopbackStopped notification is generated when a loopback test is removed on a Sonet-SDH port. The value of tmnxDS1Loopback specifies the type of loopback that was configured and has now been removed.
INT tmnxSonetSectionTraceMode	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.18	INTEGER	read-write	The tmnxSonetSectionTraceMode variable along with the tmnxSonetJ0String object determines the contents of the section trace bytes (j0/z0) in the SONET Section Header. If the mode is set to 'increment-z0', then the j0 byte is 0x01, and the z0 byte increments. If the mode is set to 'byte', then the j0 byte is the first octet of the tmnxSonetJ0String object and the z0 byte is 0xcc. If the mode is set to 'string', then the J0 byte is set to the 16 values in the tmnxSonetJ0String object and the z0 byte is 0xcc.
T/F tmnxSonetSingleFiber	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.24	TruthValue	read-write	tmnxSonetSingleFiber is used to enable/disable packet gathering and redirection of IP packets from a single fiber on RX port of the SONET interface and redistribute packets to other interfaces through either state routes or policy-based forwarding.
INT tmnxSonetSpeed	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.1	INTEGER	read-write	The rate of this optical facility.
tmnxSonetTable	1.3.6.1.4.1.6527.3.1.2.2.4.5		not-accessible	The tmnxSonetTable has an entry for each packet over Sonet port on each IOM card in each chassis in the TMNX system.

OID symbolic	OID numeric	Type	Access	Description
tmnxPortMIBModule	1.3.6.1.4.1.6527.1.1.3.25			This document is the SNMP MIB module to manage and provision the hardware components of the Alcatel 7x50 device. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tmnxPortConformance	1.3.6.1.4.1.6527.3.1.1.2.2
tmnxPortCompliances	1.3.6.1.4.1.6527.3.1.1.2.2.1
tmnxPortComp7750	1.3.6.1.4.1.6527.3.1.1.2.2.1.3
tmnxPortComp7750V4v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.3.2			The compliance statement for revision 4.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7750 SR series systems. tmnxMlImaBundleGroup was added as of R4.
tmnxPortComp7750V5v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.3.3			The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7750 SR series systems.
tmnxPortComp7750V6v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.3.4			The compliance statement for revision 6.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7750 SR series systems.
tmnxPortComp7450	1.3.6.1.4.1.6527.3.1.1.2.2.1.4
tmnxPortComp7450V4v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.4.2			The compliance statement for revision 4.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7450 SR series systems.
tmnxPortComp7450V5v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.4.3			The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7450 SR series systems.
tmnxPortComp7450V6v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.4.4			The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7450 SR series systems.
tmnxPortComp7710	1.3.6.1.4.1.6527.3.1.1.2.2.1.5
tmnxPortComp7710V3v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.5.1			The compliance statement for revision 3.0 of ALCATEL-IND1-TIMETRA-PORT-MIB.
tmnxPortComp7710V5v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.5.2			The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB.
tmnxPortComp7710V6v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.5.3			The compliance statement for revision 6.0 of ALCATEL-IND1-TIMETRA-PORT-MIB.
tmnxPortGroups	1.3.6.1.4.1.6527.3.1.1.2.2.2
tmnxPortFRGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.5			The group of objects supporting management of Frame Relay DLCMI on Alcatel 7x50 SR series systems.
tmnxQosAppObjsGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.6			The group of objects supporting management of Qos associations of the buffer pools to mdas, ports, channels and bundles on Alcatel 7x50 SR series systems.
tmnxPortTestGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.7			The group of objects supporting management of port testing on Alcatel 7x50 SR series system.
tmnxPortObsoleteGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.11			The group of objects in ALCATEL-IND1-TIMETRA-PORT-MIB which are obsoleted.
tmnxPortIngrMdaQosStatR2r1Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.14			The group of objects that describe the MDA QoS discard statistics for an ethernet port located on an oversubscribed MDA for revision 2.1 on Alcatel 7x50 SR series systems.
tmnxPortStatsR2r1Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.16			The group of objects supporting port statistics for revision 2.1 on Alcatel 7x50 SR series systems.
tmnxPortNotificationGroupR2r1	1.3.6.1.4.1.6527.3.1.1.2.2.2.17			The group of notifications supporting the management of physical ports for revision 2.1 on Alcatel 7x50 SR series systems.
tmnxPortNotifyObjsGroupR2r1	1.3.6.1.4.1.6527.3.1.1.2.2.2.18			The group of objects supporting physical port notifications for revision 2.1 on Alcatel 7x50 SR series systems.
tmnxPortNotifyObsoleteGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.20			The group of notifications supporting the management of physical ports made obsolete for revision 2.1 on Alcatel 7x50 SR series systems. tmnxEqPortSFPCorrupted was made obsolete for revision 6.0 on Alcatel 7x50 SR series systems.
tmnxPortSonetV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.21			The group of objects supporting management of SONET type ports for revision 3.0 on Alcatel 7x50 SR series systems.
tmnxPortTDMV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.22			The group of objects supporting management of TDM type ports for revision 3.0 on the Alcatel 7x50 SR series systems.
tmnxPortATMV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.23			The group of objects supporting management of ATM interfaces for version 3.0 on Alcatel 7x50 SR series systems.
tmnxScalarPortV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.24			The group of objects supporting management for general port settings for revision 3.0 on Alcatel 7x50 series systems.
tmnxPortV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.25			The group of objects supporting management of physical port capabilities for revision 3.0 on Alcatel 7x50 SR series systems.
tmnxCiscoHDLCGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.26			The group of objects supporting Cisco HDLC encapsulation on Alcatel 7750 SR series systems.
tmnxMlBundleV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.27			The group of objects supporting management MLBUNDLES for revision 3.0 on the Alcatel 7x50 SR series systems.
tmnxObsoleteGroupV3v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.28			The group of objects obsoleted in the 7x50 SR series 3.0 release
tmnxPortEthernetV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.29			The group of objects supporting management of Ethernet ports for revision 3.0 on Alcatel 7x50 SR series systems.
tmnxPortTDMGroupV4v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.30			The group of objects supporting management of TDM type ports for version 4.0 on the Alcatel 7x50 SR series systems.
tmnxPortATMGroupV4v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.31			The group of objects supporting management of ATM interfaces for version 4.0 on Alcatel 7x50 SR series systems.
tmnxMlBundleGroupV4v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.32			The group of objects supporting management MLBUNDLES for revision 4.0 on the Alcatel 7x50 SR series systems.
tmnxMlImaBundleGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.33			The group of objects supporting management of Ima Groups and Members on the Alcatel 7x50 SR series systems.
tmnx7710PortTDMGroupV3v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.34			The group of objects supporting management of TDM type ports specific to the Alcatel 7710 SR series systems for revision 3.0.
tmnxPortGroupV4v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.35			The group of objects supporting management of physical port capabilities for revision 4.0 on Alcatel 7x50 SR series systems.
tmnxObsoleteGroupV5v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.36			The group of objects obsoleted in the 7x50 SR series 5.0 release
tmnxPortSchedV5v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.37			The group of objects supporting management of physical port virtual scheduler capabilities for revision 5.0 on Alcatel 7x50 SR series systems.
tmnxPortEthernetV5v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.38			The group of objects supporting management of Ethernet ports for revision 5.0 on Alcatel 7x50 SR series systems.
tmnxPortGroupV5v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.39			The group of objects supporting management of physical port capabilities for revision 5.0 on Alcatel 7x50 SR series systems.
tmnxMlBundleGroupV5v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.40			The group of objects supporting management MLBUNDLES for revision 5.0 on the Alcatel 7x50 SR series systems.
tmnxPortNotificationGroupV5v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.41			The group of notifications supporting the management of physical ports for revision 5.0 on Alcatel 7x50 SR series systems.
tmnxPortTDMGroupV5v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.42			The group of objects supporting management of TDM type ports for version 5.0 on the Alcatel 7x50 SR series systems.
tmnx7710PortTDMGroupV5v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.43			The group of objects supporting management of TDM type ports specific to the revision 5.0 on Alcatel 7710 SR series systems.
tmnxPortCemGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.44			The group of objects supporting management of CEM encapsulation TDM type ports specific to the Alcatel 7750 and 7710 SR series systems for revision 6.0.
tmnxMcMlpppBundleGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.45			The group of objects supporting management of MClass MLPPP BUNDLES for revision 6.0 on the Alcatel 7x50 SR series systems.
tmnxPortNotificationGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.46			The group of notifications supporting the management of physical ports for revision 6.0 on Alcatel 7x50 SR series systems.
tmnxPortEthernetV6v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.47			The group of objects supporting management of Ethernet ports for revision 6.0 on Alcatel 7x50 SR series systems.
tmnxMlBundleGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.48			The group of objects supporting management MLBUNDLES for revision 6.0 on the Alcatel 7x50 SR series systems.
tmnxMlpppBundleGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.49			The group of objects supporting management of MLPPP Bundles on the Alcatel 7x50 SR series systems.
tmnxPortNotificationGroupV3v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.50			The group of notifications supporting the management of physical ports for revision 3.0 on Alcatel 7x50 SR series systems.
tmnxPortTDMGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.52			The group of objects supporting management of TDM type ports for version 6.0 on the Alcatel 7x50 SR series systems.
tmnxDigitalDiagMonitorGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.53			The group of objects supporting the management of Digital Diagnostic Monitoring SFP/XFPs for revision 6.0 on Alcatel 7x50 SR series systems.
tmnxPortGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.54			The group of objects supporting management of physical port capabilities for revision 6.0 on Alcatel 7x50 SR series systems.
tmnxNamedPoolGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.55			The group of objects supporting the Named Pool feature for revision 6.0 on Alcatel 7x50 SR series systems.
tmnxPortNotifyObjsGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.57			The group of objects supporting physical port notifications for revision 6.0 on Alcatel 7x50 SR series systems.
tmnxPortObjs	1.3.6.1.4.1.6527.3.1.2.2.4
TIM tmnxPortTableLastChange	1.3.6.1.4.1.6527.3.1.2.2.4.1	TimeStamp	read-only	The value of sysUpTime when the tmnxPortTable was last changed.
tmnxPortTable	1.3.6.1.4.1.6527.3.1.2.2.4.2		not-accessible	The port table has an entry for each port on each IOM card in each chassis in the TMNX system.
tmnxPortEntry	1.3.6.1.4.1.6527.3.1.2.2.4.2.1		not-accessible	Each row entry represents a port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM tmnxMDAEntry can be deleted from the tmnxMDATable, its supported tmnxPortEntry rows must be in the proper state for removal.
TMN tmnxPortPortID	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.1	TmnxPortID	not-accessible	tmnxPortPortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table.
TIM tmnxPortLastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.2	TimeStamp	read-only	The tmnxPortLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxPortEntry row for this port.
TMN tmnxPortType	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.3	TmnxPortType	read-only	The type of port or optical pack installed.
TMN tmnxPortClass	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.4	TmnxPortClass	read-only	The class of port or optical pack installed. This can be derived from tmnxPortType.
TIT tmnxPortDescription	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.5	TItemLongDescription	read-write	A textual string containing user supplied information about the interface.
TNA tmnxPortName	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.6	TNamedItemOrEmpty	read-only	The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `le0' or 'sys171-2/1.
TNA tmnxPortAlias	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.7	TNamedItemOrEmpty	read-write	This object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. On the first instantiation of an interface, the value of tmnxPortAlias associated with that interface is the zero-length string. As and when a value is written into an instance of tmnxPortAlias through a network management set operation, then the agent must retain the supplied value in the tmnxPortAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system.
T/F tmnxPortUserAssignedMac	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.8	TruthValue	read-only	When tmnxPortUserAssignedMac has a value of 'true', the value of tmnxPortMacAddress has been explicitly assigned by a SNMP SET request. When tmnxPortUserAssignedMac is set to 'false', tmnxPortMacAddress returns the system assigned MAC address.
MAC tmnxPortMacAddress	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.9	MacAddress	read-write	When tmnxPortUserAssignedMac has a value of 'true', tmnxPortMacAddress has the value that has been explicitly assigned by a SNMP SET request. When tmnxPortUserAssignedMac has a value of 'false', tmnxPortMacAddress returns the same value as tmnxPortMacAddress, the hardware or system assigned MAC address. When tmnxPortMacAddress is modified by a SET request, the agent sets tmnxPortUserAssignedMac to 'true'. Setting tmnxPortMacAddress to all zeros causes the agent to revert to using the default tmnxPortHwMacAddress and also to return tmnxPortUserAssignedMac as 'false'.
MAC tmnxPortHwMacAddress	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.10	MacAddress	read-only	The interface's hardware or system assigned MAC address at its protocol sub-layer. When tmnxPortUserAssignedMac has a value of 'true', the value of tmnxPortMacAddress is used instead of tmnxPortHwMacAddress. In the case of a pre-provisioned port that is not yet physically in the system, the MAC address may not be known. In this case a MAC address of all zeros is returned.
INT tmnxPortMode	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.11	INTEGER	read-write	The tmnxPortMode variable indicates if the interface on this port is configured as a service access port or a network access port. If the port mode equals 'access', and the tmnxMDAAssignedType is of ATM MDA family, then tmnxPortEncapType is automatically set to 'atmEncap'. If port mode equals 'access', tmnxPortEncapType must also be configured to 'qEncap' (For Ethernet MDAs) or to 'bcpNullEncap' for Sonet/SDH MDAs. Once the port's operation mode has been configured for 'access' mode, multiple services may be configured on the port. If the port mode equals 'network', tmnxPortEncapType must also be configured to 'nullEncap' (Ethernet MDAs), or 'pppAutoEncap' (Sonet/SDH MDAs) and tmnxPortEncapType is defaulted to those values on the mode change.
INT tmnxPortEncapType	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.12	INTEGER	read-write	The type of encapsulation protocol configured on this port's network interface. If tmnxPortEncapType has a value of 'nullEncap', frames received will not carry any tags or labels and as a result only one service can be configured on this port. Sometimes this is referred to as raw Ethernet packets. If tmnxPortEncapType has a value of 'qEncap', ingress frames carry 802.1q tags where each different tag can signify a different service. This is not a valid value if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'bcpNullEncap', Bcp is used on the sonet path as the NCP control protocol. The BCP IEEE 802 Tagged Frame Configuration Option (type 8) is negotiated to 'enabled'. VLAN tagged frames are allowed into the sonet path. Only a single SAP can be associated with the sonet path. 'bcpNullEncap' is valid only if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'bcpDot1qEncap', BCP is used as the NCP control protocol. The BCP IEEE 802 Tagged Frame Configuration Option (type 8) is negotiated to 'enabled'. VLAN tagged frames are allowed on the sonet path. This encapsulation type is required when multiple SAPs are defined on the sonet path where each one is service delimited by a provisioned Dot1q tag. When 'bcpDot1qEncap' is specified, BCP does not enter the 'open' state unless the far end peer also supports 'bcpDot1qEncap'. This allows a LCP negotiation to transmit configuration request and confirmation messages to enable this feature. 'bcpDot1qEncap' is a valid value only if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'ipcpEncap', BCP will not be used on this sonet path. IPCP NCP is used instead. 'ipcpEncap' is a valid only if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'frEncap', Frame Relay is the expected encapsulation. If tmnxPortEncapType has a value of 'pppAutoEncap', IPCP is automatically enabled. This encap type is only valid on ports/paths in network mode. If tmnxPortEncapType has a value of 'atmEncap', the encapsulation on the port is ATM. The 'atmEncap' is also used when mirroring ATM ports. If tmnxPortEncapType has a value of 'wanMirrorEncap', the port is used for mirroring of frame-relay and POS ports. On such ports no link management protocol would run. If tmnxPortEncapType has a value of 'ciscoHDLCEncap', the Cisco HDLC encapsulation is applied. This encap type is only valid if TmnxPortClass has a value of 'tdm' or 'sonet'. If tmnxPortEncapType has a value of 'cemEncap', encapsulation of frames will be circuit emulation. This is used to support transparent transmission of frames. This encap type is only valid if TmnxPortClass has a value of 'tdm' or 'sonet' in access mode. tmnxPortEncapType is set to 'unknown' for physical SONET/SDH and TDM ports.
U32 tmnxPortLagId	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.13	Unsigned32	read-write	The value of tmnxPortLagId indicates which LAG or multi-link trunk (MLT) this port is assigned to. If this port is not associated with any LAG, this value will be set to zero(0). The maximum value of this object is '64', when the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5' (ESS-1/SR-1).
U32 tmnxPortHoldTimeUp	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.14	Unsigned32	read-write	The value of tmnxPortHoldTimeUp is used to configure the hold-timer for link up event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that an up transition is reported immediately. The value of tmnxPortHoldTimeUp is not applicable when tmnxPortClass has a value of 'sonet (5)'. In that case, tmnxSonetHoldTimeUp is used instead.
U32 tmnxPortHoldTimeDown	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.15	Unsigned32	read-write	The value of tmnxPortHoldTimeDown is used to configure the hold-timer for link down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that a down transition is reported immediately. The value of tmnxPortHoldTimeDown is not applicable when tmnxPortClass has a value of 'sonet (5)'. In that case, tmnxSonetHoldTimeDown is used instead.
BIT tmnxPortUpProtocols	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.16	Bits	read-only	The tmnxPortUpProtocols variable is a bitmap that indicates what protocols can be used on this port type.
TMN tmnxPortConnectorType	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.17	TmnxPortConnectorType	read-only	The type of connector installed on this port.
INT tmnxPortTransceiverType	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.25	INTEGER	read-only	Type of the transceiver.
BIT tmnxPortTransceiverCode	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.26	Bits	read-only	The code for the transmission media. tmnxPortOpticalCompliance is used instead of tmnxPortTransceiverCode.tmnxPortOpticalCompliance contains the same information and is defined by an industry standard.
U32 tmnxPortTransceiverLaserWaveLen	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.27	Unsigned32	read-only	The light wavelength transmitted by the transceiver's laser. A value of zero indicates that the port is not equipped with the transceiver.
INT tmnxPortTransceiverDiagCapable	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.28	INTEGER	read-only	Indicates if the transceiver is capable of doing diagnostics.
TNA tmnxPortTransceiverModelNumber	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.29	TNamedItemOrEmpty	read-only	Model number of the transceiver.
INT tmnxPortSFPConnectorCode	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.30	INTEGER	read-only	The external connector provided on the interface.
U32 tmnxPortSFPVendorOUI	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.31	Unsigned32	read-only	The vendor organizationally unique identifier field (OUI) contains the IEEE company identifier for the vendor. A value of all zero indicates that the vendor OUI is unspecified.
DAT tmnxPortSFPVendorManufactureDate	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.32	DateAndTime	read-only	The vendor's date code.
INT tmnxPortSFPMedia	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.33	INTEGER	read-only	The media supported for the SFP.
T/F tmnxPortSFPEquipped	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.34	TruthValue	read-only	Indicates if the SFP is equipped.
T/F tmnxPortEquipped	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.35	TruthValue	read-only	Indicates if there is an optics pack installed in this port or not.
T/F tmnxPortLinkStatus	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.36	TruthValue	read-only	Indicates whether or not the port has a physical link.
TMN tmnxPortAdminStatus	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.37	TmnxPortAdminStatus	read-write	The desired administrative status of this port.
TMN tmnxPortOperStatus	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.38	TmnxPortOperStatus	read-only	The current operational status of this port.
TMN tmnxPortState	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.39	TmnxPortState	read-only	The state level of this port. A value of 'none' indicates the port is either in its initial creation state or is just about to be deleted. A value of 'ghost' represents a port that is not physically present. This state may represent a pre-provisioned port. A value of 'linkDown' represents a port that is physically present but does not have a link. The 'linkUp' state represents a port that is physically present and has physical link present. A port in 'up' state is ready to pass some kinds of traffic. The tmnxPortUpProtocols variable indicates the actual type(s) of traffic can be passed on this 'up' link.
TMN tmnxPortPrevState	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.40	TmnxPortState	read-only	The tmnxPortPrevState indicates the state level that the port transitioned from into the current tmnxPortState level.
U32 tmnxPortNumAlarms	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.41	Unsigned32	read-only	The number of alarms currently outstanding on this port.
TMN tmnxPortAlarmState	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.42	TmnxAlarmState	read-only	The value of tmnxPortAlarmState indicates the current alarm state for this port.
NUM tmnxPortLastAlarmEvent	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.43	RowPointer	read-only	The value of tmnxPortLastAlarmEvent is an object identifier whose object name and instance values point to the row entry in the ALARM-MIB that contains the most recent alarm event associated with this port. If the tmnxPortAlarmState has a value of 'alarmCleared', the most recent alarm event will be in the nlmAlarmClearedTable. If it has a value of 'alarmActive', the entry pointed to is in the nlmAlarmActiveTable. If the value of tmnxPortLastAlarmEvent is '0.0', then either there have not been any alarm events associated with this chassis since the system was last booted, or the last alarm event has aged out and its entry is no longer available in the ALARM-MIB tables.
TMN tmnxPortClearAlarms	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.44	TmnxActionType	read-write	Setting this action variable causes all the alarms associated with this port to be moved from the current alarm log to the history alarm log. Primarily meant for use in development. This object will most likely be removed from the MIB before product release.
TNA tmnxPortSFPVendorSerialNum	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.45	TNamedItemOrEmpty	read-only	tmnxPortSFPVendorSerialNum contains ASCII characters, defining the vendor serial number. A value of all zero indicates that the vendor SN is unspecified.
TNA tmnxPortSFPVendorPartNum	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.46	TNamedItemOrEmpty	read-only	The vendor part number contains ASCII characters, defining the vendor part number or product name. A value of all zero indicates that the vendor PN is unspecified.
TIM tmnxPortLastStateChanged	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.48	TimeStamp	read-only	The tmnxPortLastStateChanged variable contains the value of the sysUpTime the last time the operational status of the port changed state.
U32 tmnxPortNumChannels	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.49	Unsigned32	read-only	For SONET/SDH paths or TDM channels, tmnxPortNumChannels contains the number of possible immediate children. For leaf paths or channels, the value of this object will be zero. For SONET/SDH or TDM physical ports, tmnxPortNumChannels contains the total number of channels on the physical port. For all other entries in the tmnxPortTable, the value of this object will be zero.
TNA tmnxPortNetworkEgrQueues	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.50	TNamedItemOrEmpty	read-write	tmnxPortNetworkEgrQueues contains the network egress queue policy if the tmnxPortMode is network. Otherwise this object has no significance.
INT tmnxPortBundleNumber	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.51	INTEGER	read-only	tmnxPortBundleNumber identifies the bundle for which this port is a member. If this port is not a member of any bundle, the value of tmnxPortBundleNumber will be zero.
T/F tmnxPortIsLeaf	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.52	TruthValue	read-only	tmnxPortIsLeaf is applicable only when the 'isSonet' and/or 'isTDM' bits in ALCATEL-IND1-TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. When the value of this object is 'true', it indicates that the channel is capable of passing traffic. The value of this object is 'false' for: 1. Physical ports on SONET/TDM MDA's 2. Intermediate channels on a channelized MDA 3. Leaf channels which belong to a bundle For ports on Ethernet MDA's or for LAG ports, the value of this object will be 'false'.
TMN tmnxPortChanType	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.53	TmnxMDAChanType	read-only	tmnxPortChanType is applicable only when the 'isSonet' and/or 'isTDM' bits in ALCATEL-IND1-TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. It indicates the type of the channel. For ports on Ethernet MDA's, the value of this object will be 'unknown'.
TMN tmnxPortParentPortID	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.54	TmnxPortID	read-only	tmnxPortParentPortID is applicable only when the 'isSonet' and/or 'isTDM' bits in ALCATEL-IND1-TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. For SONET or TDM channel, it indicates the port ID of its parent channel or port.
OCT tmnxPortOpticalCompliance	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.55	OCTET STRING	read-only	tmnxPortOpticalCompliance is applicable only when the tmnxPortSFPEquipped is set to 'true'. The value of tmnxPortOpticalCompliance indicates the 8 bytes of optical compliance bits stored in SFP and XFP eeproms.
INT tmnxPortLoadBalanceAlgorithm	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.56	INTEGER	read-write	The value of tmnxPortLoadBalanceAlgorithm specifies the load balancing algorithm to be used on this port. When the value is 'includeL4', the src and dst port are used in the hashing algorithm. When it's 'excludeL4', they are not included. When the value is 'default', the port inherits the global settings in tmnxL4LoadBalancing. The value is 'notApplicable' for ports that do not pass any traffic. An attempt to modify this object when it is set to 'notApplicable' will return an inconsistentValue error.
TNA tmnxPortEgrPortSchedPlcy	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.57	TNamedItemOrEmpty	read-write	The value of tmnxPortEgrPortSchedPlcy specifies the egress QoS port-scheduler policy for this port. This object must correspond to the index of a row in ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyTable.
TIM tmnxPortLastClearedTime	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.58	TimeStamp	read-only	The value of tmnxPortLastClearedTime indicates the sysUpTime when the counters in the IF-MIB:ifTable were last cleared.
TNA tmnxPortIngNamedPoolPlcy	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.60	TNamedItemOrEmpty	read-write	The value of tmnxPortIngNamedPoolPlcy specifies a named pool policy associated with an port ingress context. The policy governs the way named pools are created at the port level.
TNA tmnxPortEgrNamedPoolPlcy	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.61	TNamedItemOrEmpty	read-write	The value of tmnxPortEgrNamedPoolPlcy specifies a named pool policy associated with an port egress context. The policy governs the way named pools are created at the port level.
U32 tmnxPortIngPoolPercentRate	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.62	Unsigned32	read-write	The value of tmnxPortIngPoolPercentRate specifies increment or decrement of the active bandwidth associated with the ingress port. This active bandwidth affects the amount of ingress buffer space managed by the port.
U32 tmnxPortEgrPoolPercentRate	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.63	Unsigned32	read-write	The value of tmnxPortEgrPoolPercentRate specifies increment or decrement of the active bandwidth associated with the egress port. This active bandwidth affects the amount of egress buffer space managed by the port.
T/F tmnxPortDDMEventSuppression	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.64	TruthValue	read-write	The value of tmnxPortDDMEventSuppression specifies whether or not an inserted SFP/XFP that supports Digital Diagnostic Monitoring raises traps and events (false) or suppresses all notifications (true).
INT tmnxPortSFPStatus	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.65	INTEGER	read-only	The value of tmnxPortSFPStatus indicates the operational status of the inserted SFP/XFP. If tmnxPortSFPEquipped is false, the tmnxPortSFPStatus will be 'not-equipped (0)', otherwise 'operational (1)' if no failure is detected. A failure to read the SFP data will result in a 'read-error (2)', while corrupted information on the SFP will result in either 'data-corrupt (3)', or 'ddm-corrupt (4)' if an SFP read results in invalid data or DDM information respectively. An insertion of an unsupported SFP will result in 'unsupported (5)'. A trap will be raised if the value of tmnxPortSFPStatus indicates a failure; that is the tmnxPortSFPStatus is neither 'not-equipped (0)', nor 'operational (1)'.
tmnxPortTestTable	1.3.6.1.4.1.6527.3.1.2.2.4.3		not-accessible	The tmnxPortTestTable has an entry for each port on each IOM card in each chassis in the TMNX system.
tmnxPortTestEntry	1.3.6.1.4.1.6527.3.1.2.2.4.3.1		not-accessible	Each row entry represents a port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations.
INT tmnxPortTestState	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.1	INTEGER	read-only	The current testing status of this port.
INT tmnxPortTestMode	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.2	INTEGER	read-write	The type of test to be executed on this port.
U32 tmnxPortTestParameter	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.3	Unsigned32	read-write	A parameter to be passed to the test program.
INT tmnxPortTestLastResult	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.4	INTEGER	read-only	The status of the last test executed on this port.
DAT tmnxPortTestStartTime	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.5	DateAndTime	read-only	The date and time the test started on this port. Returns 0 if tmnxPortTestState is notInTest.
DAT tmnxPortTestEndTime	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.6	DateAndTime	read-only	The date and time the last test completed. Returns 0 if a test is in progress or no tests have yet to be run on this port.
INT tmnxPortTestDuration	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.7	INTEGER	read-write	The number of seconds the port test is anticipated to last.
INT tmnxPortTestAction	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.8	INTEGER	read-write	The operator sets this variable to perform the appropriate type of testing.
tmnxPortEtherTable	1.3.6.1.4.1.6527.3.1.2.2.4.4		not-accessible	The tmnxPortEtherTable has an entry for each Ethernet (faste, gige, xcme or xgige) port on each IOM card in each chassis in the TMNX system.
tmnxPortEtherEntry	1.3.6.1.4.1.6527.3.1.2.2.4.4.1		not-accessible	Each row entry represents an Ethernet port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM card entry can be deleted from the tmnxMDATable, its supported tmnxPortEntry and tmnxPortEtherEntry rows must be in the proper state for removal. The tmnxPortEtherEntry contains attributes that are unique to the Ethernet TmnxPortType.
U32 tmnxPortEtherMTU	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.1	Unsigned32	read-write	The size of the largest packet which can be sent/received on the Ethernet physical interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface. Setting tmnxPortEtherMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1514 with mode access and encap-type null 1518 with mode access and encap-type dot1q 1518 with mode access and encap-type mpls 9198 with mode network
INT tmnxPortEtherDuplex	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.2	INTEGER	read-write	The tmnxPortEtherDuplex variable specifies the duplex mode used by the Ethernet interface if tmnxPortEtherAutoNegotiate has a value of 'false' or 'limited'. If tmnxPortEtherAutoNegotiate has a value of 'true', the link parameters are negotiated with the far end and the tmnxPortEtherDuplex variable is ignored. A value of 'fullDuplex' sets the link to full duplex mode. A value of 'halfDuplex' sets the link to half duplex mode. tmnxPortEtherDuplex is only valid on Ethernet interfaces that support multiple duplex modes.
INT tmnxPortEtherSpeed	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.3	INTEGER	read-write	The tmnxPortEtherSpeed variable specifies the link speed of the Ethernet interface if tmnxPortEtherAutoNegotiate has a value of 'false' or 'limited'. If tmnxPortEtherAutoNegotiate has a value of 'true', the link parameters are negotiated with the far end and the tmnxPortEtherSpeed variable is ignored. A value of 'speed10' sets the link to 10 mbps. A value of 'speed100' sets the link to 100 mbps. A value of 'speed1000' sets the link to 1000 mbps (1 gbps). tmnxPortEtherSpeed is only valid on Ethernet interfaces that support multiple link speeds.
INT tmnxPortEtherAutoNegotiate	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.4	INTEGER	read-write	When the value of tmnxPortEtherAutoNegotiate is 'true', the Ethernet interface will automatically negotiate link parameters with the far end (including speed and duplex), and will advertise all speeds and duplex modes supported by the interface. When the value of tmnxPortEtherAutoNegotiate is 'limited', the Ethernet interface will automatically negotiate link parameters with the far end, but will only advertise the speed and duplex mode specified by tmnxPortEtherSpeed and tmnxPortEtherDuplex. If tmnxPortEtherAutoNegotiate is 'false', the Ethernet interface won't negotiate link parameters with the far end and will instead force the speed and duplex mode to the values specified by tmnxPortEtherSpeed and tmnxPortEtherDuplex respectively.
INT tmnxPortEtherOperDuplex	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.5	INTEGER	read-only	The tmnxPortEtherOperDuplex variable indicates the operational duplex mode of the Ethernet interface. A value of 'fullDuplex' indicates that the link is in full duplex mode. A value of 'halfDuplex' indicates that the link is in half duplex mode. tmnxPortEtherOperDuplex is only valid if tmnxPortClass is 'faste' or 'xcme'.
U32 tmnxPortEtherOperSpeed	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.6	Unsigned32	read-only	The tmnxPortEtherOperSpeed variable indicates the operational speed of the Ethernet interface in mega-bits per second (mbps). If the value of tmnxPortEtherAutoNegotiate is 'true', the link autonegotiates the link parameters with the far end side. The value of tmnxPortEtherOperSpeed is only valid if tmnxPortClass is one of the Ethernet classes.
U32 tmnxPortEtherAcctPolicyId	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.7	Unsigned32	read-write	The value of the accounting policy must be defined prior to associating the policy with the ethernet port. Accounting policies can only be associated with network ports. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this port. A zero value indicates that there is no accounting policy associated with this port
T/F tmnxPortEtherCollectStats	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.8	TruthValue	read-write	Enable/disable the collection of accounting and statistical data for the network ethernet port. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPU will not obtain the results and write them to the billing file.
INT tmnxPortEtherMDIMDIX	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.9	INTEGER	read-only	The tmnxPortEtherMDIMDIX variable indicates whether the Ethernet interface is of type 'mdi' (Media Dependent Interface) or 'mdix' (Media Dependent Interface with crossover). If the agent cannot identify the type of Ethernet interface the value 'unknown (0)' is indicated. tmnxPortEtherMDIMDIX is only valid if tmnxPortClass is 'faste' or 'xcme'.
INT tmnxPortEtherXGigMode	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.10	INTEGER	read-write	The tmnxPortEtherXGigMode variable specifies whether the Ethernet interface is in LAN or WAN mode. tmnxPortEtherXGigMode must be 'notApplicable' if tmnxPortClass is not 'xgige'.
I32 tmnxPortEtherEgressRate	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.11	Integer32	read-write	The tmnxPortEtherEgressRate variable specifies the maximum egress bandwidth (in kilobits per second) that the Ethernet interface can generate. A value of -1 means that the limit is the actual physical limit. If the provisioned sub-rate bandwidth is larger than the actual physical bandwidth of the interface, the latter applies.
U32 tmnxPortEtherDot1qEtype	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.12	Unsigned32	read-write	The tmnxPortEtherDot1qEtype variable indicates the ethertype expected when the port's encapsulation type is dot1qEncap.
U32 tmnxPortEtherQinqEtype	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.13	Unsigned32	read-write	The tmnxPortEtherQinqEtype variable indicates the ethertype expected when the port's encapsulation type is qinqEncap.
I32 tmnxPortEtherIngressRate	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.14	Integer32	read-write	The tmnxPortEtherIngressRate variable specifies the maximum ingress bandwidth (in mega-bits per second) that the Ethernet interface can receive. A value of -1 means that the limit is the actual physical limit. If the provisioned sub-rate bandwidth is larger than the actual physical bandwidth of the interface, the latter applies.
TMN tmnxPortEtherReportAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.15	TmnxPortEtherReportStatus	read-write	The value of tmnxPortEtherReportAlarm determines when and if to generate tmnxEqPortEtherAlarm and tmnxEqPortEtherAlarmClear.
TMN tmnxPortEtherReportAlarmStatus	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.16	TmnxPortEtherReportStatus	read-only	The value of tmnxPortEtherReportAlarmStatus indicates the alarms on this port.
C32 tmnxPortEtherPkts1519toMax	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.17	Counter32	read-only	The total number of packets received that were longer than 1518 octets but less than the maximum frame size for the particular medium, usually 12287 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
C32 tmnxPortEtherHCOverPkts1519toMax	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.18	Counter32	read-only	The number of times the associated tmnxPortEtherPkts1519toMax counter has overflowed.
C64 tmnxPortEtherHCPkts1519toMax	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.19	Counter64	read-only	The total number of packets (including bad packets) received that were between 1519 octets in length and the maximum frame size, usually 12287 octets inclusive (excluding framing bits but including FCS octets). The lower 32-bits of this 64-bit counter will equal the value of tmnxPortEtherHCPkts1519toMax. The high 32-bits of this counter will equal the value of tmnxPortEtherHCOverPkts1519toMax.
T/F tmnxPortEtherLacpTunnel	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.20	TruthValue	read-write	The value of tmnxPortEtherLacpTunnel specifies whether the LACP packet tunneling for the ethernet port is enabled or disabled. When tunneling is enabled, the port will not process any LACP packets but will tunnel them through instead. Also, the port cannot be added as a member to a LAG group, and vice versa.
T/F tmnxPortEtherDownWhenLoopedEnabled	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.21	TruthValue	read-write	The value of tmnxPortEtherDownWhenLoopedEnabled specifies whether physical loop detection for the Ethernet port is enabled or disabled. When enabled, the port will periodically send out keep-alive PDUs with an EtherType of 0x9000. If the port receives a keep-alive that it transmitted, tmnxPortState will be set to 'linkUp' if it was previously 'up'. The port will not move back to tmnxPortState 'up' for a period of time defined by tmnxPortEtherDownWhenLoopedRetry, but will continue to periodically send out keep-alive PDUs. Every time the port receives a keep alive it sent while a loop has been detected, it will reset the time period that it will remain down as defined by tmnxPortEtherDownWhenLoopedRetry.
U32 tmnxPortEtherDownWhenLoopedKeepAlive	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.22	Unsigned32	read-write	The tmnxPortEtherDownWhenLoopedKeepAlive variable specifies the number of seconds between each keep alive PDU transmission.
U32 tmnxPortEtherDownWhenLoopedRetry	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.23	Unsigned32	read-write	The tmnxPortEtherDownWhenLoopedRetry variable specifies the minimum number of seconds the port should wait after detecting a loop before tmnxPortState can be set to 'up'. A value of 0 specifies the the port should not set tmnxPortState to 'up' until the user administratively disables and re-enables the port by setting tmnxPortAdminStatus to 'outOfService' and then to 'inService'.
INT tmnxPortEtherDownWhenLoopedState	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.24	INTEGER	read-only	The value of tmnxPortEtherDownWhenLoopedState indicates whether a physical loop has been detected on the port or not. If tmnxPortEtherDownWhenLoopedEnabled is set to 'false', this value will be 'noLoopDetected'.
U32 tmnxPortEtherPBBEtype	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.25	Unsigned32	read-write	The tmnxPortEtherPBBEtype variable indicates the Ethertype expected for Provider Backbone Bridging Frames.
BIT tmnxPortEtherReasonDownFlags	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.26	Bits	read-only	The tmnxPortEtherReasonDownFlags indicates why an ethernet port may be in the operationally 'down' state. The following reasons are detected through this object: unknown(0) - Unspecified (or unknown) linklossFwd(1) - A sap using this port has the object 'sapEthernetLLFOperStatus' set to 'fault'
tmnxSonetTable	1.3.6.1.4.1.6527.3.1.2.2.4.5		not-accessible	The tmnxSonetTable has an entry for each packet over Sonet port on each IOM card in each chassis in the TMNX system.
tmnxSonetEntry	1.3.6.1.4.1.6527.3.1.2.2.4.5.1		not-accessible	Each row entry represents a packet over Sonet port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM tmnxMDAEntry can be deleted from the tmnxMDATable, its supported tmnxPortEntry rows must be in the proper state for removal. The tmnxSonetEntry contains attributes that are unique to the 'sonet' TmnxPortType. It also contains attributes that are common to all sonet paths configured on a sonet port. The tmnxPortPortID for a sonet port includes a sonet path number in the lower bits. If the sonet path number is zero, '0', it represents a single (clear) sonet path on the port that uses the full bandwidth of the sonet port. All entries in this table have the sonet path number part of their tmnxPortPortID index value set to zero.
INT tmnxSonetSpeed	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.1	INTEGER	read-write	The rate of this optical facility.
INT tmnxSonetClockSource	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.2	INTEGER	read-write	tmnxSonetClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed') or from a clock recovered from the line's receive data stream ('loopTimed').
INT tmnxSonetFraming	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.3	INTEGER	read-write	The value of tmnxSonetFraming indicates the type of framing used on this interface.
BIT tmnxSonetReportAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.4	Bits	read-write	The value of tmnxSonetReportAlarm determines when and if to generate tmnxEqPortSonetAlarm and tmnxEqPortSonetAlarmClear notifications for this port: loc(1) Reports a loss of clock which causes the operational state of the port to be downed. Set by default. lais(2) Reports line alarm indication signal errors. Not set by default. lrdi(3) Reports line remote defect initiation errors. LRDIs are caused by remote LOF, LOC, and LOS. Set by default. ss1f(4) Reports section synchronization failure as reported by the S1 byte. Not set by default. sb1err(5) Reports section B1 errors. Not set by default. lb2erSd(6) Reports line signal degradation BER errors. Not set by default. lb2erSf(7) Reports line signal failure BER errors. Set by default. slof(8) Reports section loss of frame errors. Set by default slos(9) Reports section loss of signal errors. Set by default. stxptr(10) Reports a section synchronization error on the transmit side. Indicates if there is a positive or negative justification count per channel. Not set by default. srxptr(11) Reports a section synchronization error on the receive side. Indicates if there is a positive or negative justification count per path. Not set by default. lrei(12) Reports a line error condition raised by the remote as a result of B1 errors received from this node. Not set by default.
U32 tmnxSonetBerSdThreshold	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.5	Unsigned32	read-write	The value of tmnxSonetBerSdThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortSonetAlarm notification for a BER SD failure and tmnxEqPortSonetAlarmClear notification for a BER SD failure clear. tmnxSonetBerSdThreshold is the absolute value of the exponent of the rate expressed as 10e-n.
U32 tmnxSonetBerSfThreshold	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.6	Unsigned32	read-write	The value of tmnxSonetBerSfThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortSonetAlarm notification for a BER SF failure and tmnxEqPortSonetAlarmClear notification for a BER SF failure clear. tmnxSonetBerSdThreshold is the absolute value of the exponent of the rate expressed as 10e-n.
T/F tmnxSonetAps	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.7	TruthValue	read-write	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
TMN tmnxSonetApsAdminStatus	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.8	TmnxPortAdminStatus	read-write	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
TMN tmnxSonetApsOperStatus	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.9	TmnxPortOperStatus	read-only	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
OCT tmnxSonetApsAuthKey	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.10	OCTET STRING	read-write	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
IP tmnxSonetApsNeighborAddr	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.11	IpAddress	read-write	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
NUM tmnxSonetApsAdvertiseInterval	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.12	TimeInterval	read-write	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
NUM tmnxSonetApsAdvertiseTimeLeft	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.13	TimeInterval	read-only	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
NUM tmnxSonetApsHoldTime	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.14	TimeInterval	read-write	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
NUM tmnxSonetApsHoldTimeLeft	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.15	TimeInterval	read-only	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
INT tmnxSonetLoopback	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.16	INTEGER	read-write	Activate a loopback on the SONET port. The SONET port must be in a shutdown state to activate any type of loopback.
BIT tmnxSonetReportAlarmStatus	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.17	Bits	read-only	The bits in this object are used for indicating the alarms. The bits are explained as follows: loc(1) Indicates a loss of clock which causes the operational state of the port to be downed. lais(2) Indicates line alarm indication signal errors. lrdi(3) Indicates line remote defect indication errors. LRDIs are caused by remote LOF, LOC, and LOS. ss1f(4) Indicates section synchronization failure as reported by the S1 byte. sb1err(5) Indicates section B1 errors. lb2erSd(6) Indicates line signal degradation BER errors. lb2erSf(7) Indicates line signal failure BER errors. slof(8) Indicates section loss of frame errors. slos(9) Indicates section loss of signal errors. stxptr(10) Indicates a section synchronization error on the transmit side. Indicates if there is a positive or negative justification count per channel. srxptr(11) Indicates a section synchronization error on the receive side. Indicates if there is a positive or negative justification count per sonet path. lrei(12) Indicates a line error condition raised by the remote as a result of B1 errors received from this node.
INT tmnxSonetSectionTraceMode	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.18	INTEGER	read-write	The tmnxSonetSectionTraceMode variable along with the tmnxSonetJ0String object determines the contents of the section trace bytes (j0/z0) in the SONET Section Header. If the mode is set to 'increment-z0', then the j0 byte is 0x01, and the z0 byte increments. If the mode is set to 'byte', then the j0 byte is the first octet of the tmnxSonetJ0String object and the z0 byte is 0xcc. If the mode is set to 'string', then the J0 byte is set to the 16 values in the tmnxSonetJ0String object and the z0 byte is 0xcc.
OCT tmnxSonetJ0String	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.19	OCTET STRING	read-write	The tmnxSonetJ0String is used with the tmnxSonetSectionTraceMode variable to determine the contents of the j0 byte in the SONET Section Header. If the tmnxSonetSectionTraceMode is increment-z0, this object is ignored. If the mode is byte, then the first octet of this object is used for the J0 byte. If the mode is string, then the 16 bytes in this object are used for the J0 byte. If set to less than 16 bytes it, will be padded out to 16 with zeros. The default value is 0x01 and 15 NULLs
U32 tmnxSonetMonS1Byte	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.20	Unsigned32	read-only	The tmnxSonetMonS1Byte variable reports the Synchronization Status Message from the S1 byte in the Line Overhead Header. A value of 0x00 indicates unknown quality. A value of 0xF0 indicates `Do not use for synchronization`. Other values are documented in Tellcordia GR253 and ITU G.707
OCT tmnxSonetMonJ0String	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.21	OCTET STRING	read-only	The tmnxSonetMonJ0String variable reports the contents of the j0 byte in the SONET Section Header.
U32 tmnxSonetMonK1Byte	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.22	Unsigned32	read-only	The tmnxSonetMonK1Byte variable reports the Automatic Protection Switching(APS) signalling status from the K1 byte in the SONET Line Overhead Header.
U32 tmnxSonetMonK2Byte	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.23	Unsigned32	read-only	The tmnxSonetMonK1Byte variable reports the Automatic Protection Switching(APS) signalling status from the K2 byte in the SONET Line Overhead Header.
T/F tmnxSonetSingleFiber	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.24	TruthValue	read-write	tmnxSonetSingleFiber is used to enable/disable packet gathering and redirection of IP packets from a single fiber on RX port of the SONET interface and redistribute packets to other interfaces through either state routes or policy-based forwarding.
U32 tmnxSonetHoldTimeUp	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.25	Unsigned32	read-write	The value of tmnxSonetHoldTimeUp is used to configure the hold-timer for link up event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that an up transition is reported immediately.
U32 tmnxSonetHoldTimeDown	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.26	Unsigned32	read-write	The value of tmnxSonetHoldTimeDown is used to configure the hold-timer for link down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that a down transition is reported immediately.
tmnxSonetPathTable	1.3.6.1.4.1.6527.3.1.2.2.4.6		not-accessible	The tmnxSonetPathTable has an entry for each sonet path configured in each packet over Sonet port on each IOM card in each chassis in the TMNX system.
tmnxSonetPathEntry	1.3.6.1.4.1.6527.3.1.2.2.4.6.1		not-accessible	Each row entry represents a configured sonet path in a packet over Sonet port on a IOM card in a chassis in the system. The tmnxSonetPathEntry contains attributes that are unique to a sonet path of a 'sonet' TmnxPortType. The tmnxPortPortID for a sonet port includes a sonet path number in the lower bits. If the sonet path number is zero, '0', it represents a single (clear) sonet path on the port that uses the full bandwidth of the sonet port. Entries in this table that have the sonet path number part of their tmnxPortPortID index value set to zero cannot be created and deleted via SNMP SET operations. They are created by the SNMP agent when the corresponding entry in the tmnxSonetTable is created. Entries with non-zero sonet path numbers can be created and deleted via SNMP SET operations using tmnxSonetPathRowStatus. When a row is created in the tmnxSonetPathTable, the agent also creates a row with the same index values in the tmnxPortTable. In order to delete an entry, tmnxPortAdminStatus must first be set to 'outOfService'. When the tmnxSonetPathEntry is deleted, the agent also deletes the corresponding row in the tmnxPortTable.
ROW tmnxSonetPathRowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.1	RowStatus	read-create	tmnxSonetPathRowStatus controls the creation and deletion of row entries in the tmnxSonetPathTable. The tmnxPortPortID for a sonet port includes a sonet path number in the lower bits. If the sonet path number is zero, '0', it represents a single (clear) sonet path on the port that uses the full bandwidth of the sonet port. Entries in this table that have the sonet path number part of their tmnxPortPortID index value set to zero cannot be created and deleted via SNMP SET operations. They are created by the SNMP agent when the corresponding entry in the tmnxSonetTable is created. Entries with non-zero sonet path numbers can be created and deleted via SNMP SET operations. When a row is created in the tmnxSonetPathTable, the agent also creates a row with the same index values in the tmnxPortTable. In order to delete an entry, tmnxPortAdminStatus must first be set to 'outOfService'. When the tmnxSonetPathEntry is deleted, the agent also deletes the corresponding row in the tmnxPortTable for this sonet path port.
TIM tmnxSonetPathLastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.2	TimeStamp	read-only	The tmnxSonetPathLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxSonetPathEntry row for this sonet path.
U32 tmnxSonetPathMTU	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.3	Unsigned32	read-create	The size of the largest packet which can be sent/received on the sonet path, specified in octets. For paths that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the sonet path. Setting tmnxSonetPathMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1522 with mode access and encap-type bcp-null 1526 with mode access and encap-type bcp-dot1q 1502 with mode access and encap-type ipcp 1506 with mode access and encap-type mplscp 1524 with mode access and encap-type atm 9208 with mode network
T/F tmnxSonetPathScramble	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.4	TruthValue	read-create	If the tmnxSonetPathScramble variable is set to 'true', SONET (SDH) payload scrambling is enabled on this sonet path. Both ends of the connection must use the same scrambling algorithm. If tmnxSonetPathScramble is set to 'false', scrambling is disabled. The default value for non-ATM paths is 'false'. The default value for ATM paths is 'true' If the value of tmnxSonetPathC2Byte is set to the default for the currently configured tmnxSonetPathScramble, then changing the value of tmnxSonetPathScramble for non-ATM paths causes a change to tmnxSonetPathC2Byte to a default value for a new scrambling option. The default values are as follows: scrambled non-ATM sonet/sdh path - C2 Byte value is 0x16 unscrambled non-ATM sonet/sdh path - C2 Byte value is 0xCF
U32 tmnxSonetPathC2Byte	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.5	Unsigned32	read-create	The tmnxSonetPathC2Byte variable is used configure the value used in the SONET/SDH C2 header byte. For paths on an MDA that does not support channelization: Setting C2 equal to 0x16 indicates scrambled sonet. Setting C2 equal to 0xCF indicates unscrambled sonet. Setting C2 equal to 0x13 indicates ATM. For paths on an MDA that supports channelization, the default value is based on the value of tmnxMDAMaxChannelization. For 'pdhDs3' or 'pdhE3' channelization, the default value is 0x04. Setting tmnxSonetPathC2Byte to a value of zero(0) causes the agent to assign the default value to this object.
OCT tmnxSonetPathJ1String	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.6	OCTET STRING	read-create	The tmnxSonetPathJ1String variable is used to configure the sonet path trace string to be sent in the J1 Path Overhead bytes. The bytes must be printable ASCII. If the string is less than 62 bytes, it will be padded with NULLs. For SONET framing, an additional CR (0x0D) / LF (0x0A) pair will be added by the driver. For SDH framing only 16 bytes are sent in the J1 bytes. The driver will set the MSB of the first byte, and put the first 15 bytes of the user configured string as the following bytes. The driver will set the CRC-7 of the 16 bytes into the other 7 bits of the first byte. The default value is `Alcatel 7x50 SR`. Setting a 1-byte long string containing 0xFF will restore the default. Setting the string 'zeros' will send all-zeros (ASCII NULL characters without CR/LF or CRC-7)in the J1 bytes.
INT tmnxSonetPathCRC	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.7	INTEGER	read-create	The value of tmnxSonetPathCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the error detection ability, but it also adds some performance overhead. For paths with encapsulation set to ATM the default and only supported value is crc32 and applies to AAL5 CRC calculations on that path.
U32 tmnxSonetPathOperMTU	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.8	Unsigned32	read-only	The negotiated size of the largest packet which can be sent on the sonet path, specified in octets. For sonet paths that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the sonet path.
U32 tmnxSonetPathOperMRU	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.9	Unsigned32	read-only	The negotiated size of the largest packet that can be received on the sonet path, specified in octets.
BIT tmnxSonetPathReportAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.10	Bits	read-create	The value of tmnxSonetPathReportAlarm determines when and if to generate tmnxEqPortSonetPathAlarm and tmnxEqPortSonetPathAlarmClear notifications for this port: pais(1) Reports path alarm indication signal errors. Not set by default. plop(2) Reports path loss of pointer (per tributary) errors. Set by default. prdi(3) Reports path remote defect indication errors. Not set by default. pb3err(4) Reports path B3 errors. Not set by default. pplm(5) Reports a path payload mismatch. As a result the path will be operationally downed. Set by default. prei(6) Reports a path error condition raised by the remote as a result of B3 errors received from this node. Not set by default. puneq(7) Reports unequipped path errors. Set by default. plcd(8) Reports path loss of codegroup delineation error. It is applicable only when the value of tmnxPortEtherXGigMode is set to 'wan'. Not set by default.
U32 tmnxSonetPathAcctPolicyId	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.11	Unsigned32	read-create	The value of the accounting policy must be defined prior to associating the policy with the sonet path. Accounting policies can only be associated with network sonet path. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this port. A zero value indicates that there is no accounting policy associated with this port
T/F tmnxSonetPathCollectStats	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.12	TruthValue	read-create	Enable/disable the collection of accounting and statistical data for the network sonet path. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPU will not obtain the results and write them to the billing file.
BIT tmnxSonetPathReportAlarmStatus	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.13	Bits	read-only	The bits in this object are used for indicating the alarms. The bits are explained as follows: pais(1) Indicates path alarm indication signal errors. plop(2) Indicates path loss of pointer (per tributary) errors. prdi(3) Indicates path remote defect indication errors. pb3err(4) Indicates path B3 errors. pplm(5) Indicates a path payload mismatch. prei(6) Indicates a path error condition raised by the remote as a result of B3 errors received from this node. puneq(7) Indicates a far-end unequipped error. plcd(8) Indicates a path loss of codegroup delineation error. It is applicable only when the value of tmnxPortEtherXGigMode is set to 'wan'. Not set by default.
U32 tmnxSonetPathMonC2Byte	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.14	Unsigned32	read-only	The tmnxSonetPathC2Byte variable reports the value in the SONET/SDH C2 header byte.
OCT tmnxSonetPathMonJ1String	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.15	OCTET STRING	read-only	The tmnxSonetPathJ1String variable reports the sonet path trace string received in the J1 Path Overhead bytes.
INT tmnxSonetPathType	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.16	INTEGER	read-create	tmnxSonetPathType specifies if the associated SONET/SDH Path is an asynchronous circuit, a virtual tributary group or a tributary unit group. ds3 - Configures the port or channel as service access(ds3) e3 - Configures the port or channel as service access(e3) vtg - Configures the path as a virtual tributary group. tug-2 - Configures the path as a tributary unit group. tug-3 - Configures the port or channel for transport network use.
TMN tmnxSonetPathChildType	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.17	TmnxMDAChanType	read-create	tmnxSonetPathChildType is used to configure the type of this path. Some typical default values are: pdhDs3 for STS-1 paths pdhE3 for TU3 paths pdhE1 for VT2 paths pdhDs1 for VT15 paths Examples of valid child path types are sonetSts3, sdhTug3, pdhDs3, pdhE3, sonetVt15, sonetVt2, pdhDs1 and pdhE1.
tmnxPortTypeTable	1.3.6.1.4.1.6527.3.1.2.2.4.7		not-accessible	The Port type table has an entry for each Alcatel 7x50 SR series port model.
tmnxPortTypeEntry	1.3.6.1.4.1.6527.3.1.2.2.4.7.1		not-accessible	Each row entry represents an Alcatel 7x50 SR series port model. Rows in this table are created by the agent at initialization and cannot be created or destroyed by SNMP Get or Set requests.
TMN tmnxPortTypeIndex	1.3.6.1.4.1.6527.3.1.2.2.4.7.1.1	TmnxPortType	not-accessible	The unique index value which identifies this type of Alcatel 7x50 SR series port model.
TNA tmnxPortTypeName	1.3.6.1.4.1.6527.3.1.2.2.4.7.1.2	TNamedItemOrEmpty	read-only	The administrative name that identifies this type of Alcatel 7x50 SR series port model. This name string may be used in CLI commands to specify a particular Port model type.
TIT tmnxPortTypeDescription	1.3.6.1.4.1.6527.3.1.2.2.4.7.1.3	TItemDescription	read-only	A detailed description of this Alcatel 7x50 SR series port model.
T/F tmnxPortTypeStatus	1.3.6.1.4.1.6527.3.1.2.2.4.7.1.4	TruthValue	read-only	When tmnxPortTypeStatus has a value of 'true' it indicates that this port model is supported in this revision of the management software. When it has a value of 'false' there is no support.
tmnxPortConnectTypeTable	1.3.6.1.4.1.6527.3.1.2.2.4.8		not-accessible	The Port Connector type table has an entry for each Alcatel 7x50 SR series port connector model.
tmnxPortConnectTypeEntry	1.3.6.1.4.1.6527.3.1.2.2.4.8.1		not-accessible	Each row entry represents an Alcatel 7x50 SR series port Connector model. Rows in this table are created by the agent at initialization and cannot be created or destroyed by SNMP Get or Set requests.
TMN tmnxPortConnectTypeIndex	1.3.6.1.4.1.6527.3.1.2.2.4.8.1.1	TmnxPortConnectorType	not-accessible	The unique index value which identifies this type of Alcatel 7x50 SR series port connector model.
TNA tmnxPortConnectTypeName	1.3.6.1.4.1.6527.3.1.2.2.4.8.1.2	TNamedItemOrEmpty	read-only	The administrative name that identifies this type of Alcatel 7x50 SR series port connector model. This name string may be used in CLI commands to specify a particular port connector model type.
TIT tmnxPortConnectTypeDescription	1.3.6.1.4.1.6527.3.1.2.2.4.8.1.3	TItemDescription	read-only	A detailed description of this Alcatel 7x50 SR series port connector model.
T/F tmnxPortConnectTypeStatus	1.3.6.1.4.1.6527.3.1.2.2.4.8.1.4	TruthValue	read-only	When tmnxPortConnectTypeStatus has a value of 'true' it indicates that this port connector model is supported in this revision of the chassis management software. When it has a value of 'false' there is no support.
tmnxPortFCStatsTable	1.3.6.1.4.1.6527.3.1.2.2.4.9		not-accessible	The Network Port FC Stats table has an entry for each forwarding class defined on each network port.
tmnxPortFCStatsEntry	1.3.6.1.4.1.6527.3.1.2.2.4.9.1		not-accessible	Each row entry represents a set of ingress and egress packet and octet statistics for the given network port and forwarding class. Rows in this table are created by the agent when the network port is provisioned and cannot be created or destroyed by SNMP Get or Set requests.
TFC tmnxPortFCStatsIndex	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.1	TFCName	not-accessible	The forwarding class associated with these stats on this network port.
C64 tmnxPortFCStatsIngFwdInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.2	Counter64	read-only	The number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.
C64 tmnxPortFCStatsIngFwdOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.3	Counter64	read-only	The number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.
C64 tmnxPortFCStatsIngFwdInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.4	Counter64	read-only	The number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.
C64 tmnxPortFCStatsIngFwdOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.5	Counter64	read-only	The number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.
C64 tmnxPortFCStatsIngDroInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.6	Counter64	read-only	The number of in-profile packets (rate below CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsIngDroOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.7	Counter64	read-only	The number of out-of-profile packets (rate above CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsIngDroInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.8	Counter64	read-only	The number of in-profile octets (rate below CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsIngDroOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.9	Counter64	read-only	The number of out-of-profile octets (rate above CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsEgrFwdInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.10	Counter64	read-only	The number of in-profile packets (rate below CIR) forwarded by the egress Qchip.
C64 tmnxPortFCStatsEgrFwdOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.11	Counter64	read-only	The number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.
C64 tmnxPortFCStatsEgrFwdInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.12	Counter64	read-only	The number of in-profile octets (rate below CIR) forwarded by the egress Qchip.
C64 tmnxPortFCStatsEgrFwdOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.13	Counter64	read-only	The number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.
C64 tmnxPortFCStatsEgrDroInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.14	Counter64	read-only	The number of in-profile packets (rate below CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsEgrDroOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.15	Counter64	read-only	The number of out-of-profile packets (rate above CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsEgrDroInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.16	Counter64	read-only	The number of in-profile octets (rate below CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsEgrDroOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.17	Counter64	read-only	The number of out-of-profile octets (rate above CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
tmnxDS3Table	1.3.6.1.4.1.6527.3.1.2.2.4.10		not-accessible	The tmnxDS3Table has an entry for a DS3 physical port.
tmnxDS3Entry	1.3.6.1.4.1.6527.3.1.2.2.4.10.1		not-accessible	Each row entry represents a physical DS3 port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when the tmnxMDAAssignedType object is set to the DS3 MDA type The tmnxDS3Entry contains attributes that are unique to the 'ds3e3' TmnxPortType. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each tmnxDS3Entry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
INT tmnxDS3Buildout	1.3.6.1.4.1.6527.3.1.2.2.4.10.1.1	INTEGER	read-create	tmnxDS3Buildout configures the T3 line buildout. A T3 port has two settings for the T3 line buildout: a short setting, which is less than 225 feet, and a long setting, which is greater than 225 feet. This object applies to copper-cable-based T3 ports only.
TIM tmnxDS3LastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.10.1.2	TimeStamp	read-only	The tmnxDS3LastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS3Entry row for this port.
INT tmnxDS3Type	1.3.6.1.4.1.6527.3.1.2.2.4.10.1.3	INTEGER	read-create	tmnxDS3Type configures the type of the physical port to 'ds3' or 'e3'.
tmnxDS3ChannelTable	1.3.6.1.4.1.6527.3.1.2.2.4.11		not-accessible	The tmnxDS3ChannelTable has an entry for a DS3 channel.
tmnxDS3ChannelEntry	1.3.6.1.4.1.6527.3.1.2.2.4.11.1		not-accessible	Each row entry represents a DS3 channel. Entries can be created and deleted via SNMP SET operations. The tmnxDS3ChannelEntry contains attributes that are applicable to a DS3 channel which can belong to the DS3 physical port or belong to a container on a sonet path. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each tmnxDS3ChannelEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
ROW tmnxDS3ChannelRowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.1	RowStatus	read-create	tmnxDS3ChannelRowStatus controls the creation and deletion of row entries in the tmnxDS3ChannelTable. For row creation, the manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme.
INT tmnxDS3ChannelType	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.2	INTEGER	read-only	The value of tmnxDS3ChannelType indicates whether the channel is in DS3 or E3 mode.
INT tmnxDS3ChannelFraming	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.3	INTEGER	read-create	The value of tmnxDS3ChannelFraming indicates the type of framing associated with the DS3 channel. If tmnxDS3ChannelType is set to 'ds3', the default framing is 'cbit'. If tmnxDS3ChannelType is set to 'e3', the default framing is 'g751'.
TMN tmnxDS3ChannelClockSource	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.4	TmnxDSXClockSource	read-create	tmnxDS3ChannelClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed'), or from a clock recovered from the line's receive data stream ('loopTimed').
INT tmnxDS3ChannelChannelized	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.5	INTEGER	read-create	tmnxDS3ChannelChannelized is used to create sub-channels of type 'ds1' or 'e1' or 'j1' on the interface. Setting the value to 'none' removes the sub-channels on the interface.
INT tmnxDS3ChannelSubrateCSUMode	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.6	INTEGER	read-create	tmnxDS3ChannelSubrateCSUMode configures the channel service unit (CSU) compatibility mode to interoperate with existing DS3 subrate standards. This configuration applies only for a non-channelized DS3. Changing the value of tmnxDS3ChannelSubrateCSUMode to notUsed resets the value of tmnxDS3ChannelScramble to 'false'. Changing the value of tmnxDS3ChannelSubrateCSUMode resets the value of tmnxDS3ChannelSubrate to default for the mode if tmnxDS3ChannelSubrate is not provided.
U32 tmnxDS3ChannelSubrate	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.7	Unsigned32	read-create	tmnxDS3ChannelSubrate configures the subrate step. tmnxDS3ChannelSubrate multiplied by the granularity for a particular mode as defined by tmnxDS3ChannelSubrateCSUMode gives the absoulte subrate in kbps. ----------------------------------------------------------------------- Subrate CSU Mode\|Granularity\|Default \|Range \|Subrate speed range ----------------------------------------------------------`------------- notUsed \| N/A \| 0 \| 0 \|N/A digital-link \| 301 kbps \| 1 \| 1 to 147 \|301 kbps to 44.2 mbps -----------------------------------------------------------------------
TMN tmnxDS3ChannelIdleCycleFlags	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.8	TmnxDSXIdleCycleFlags	read-create	tmnxDS3ChannelIdleCycleFlags configures the value that the DS3 port transmits during idle cycle. The default value applies to HDLC channels only. For ATM channels the object does not really apply so a default value of 'none' is used and cannot be changed.
TMN tmnxDS3ChannelLoopback	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.9	TmnxDS3Loopback	read-create	tmnxDS3ChannelLoopback is used to put the channel into a loopback mode. The value of tmnxPortAdminStatus should be set to 'outOfService' in order for the loopback to be enabled. A 'line' loopback loops frames received on this port back to the remote system. A 'internal' loopback loops the frames from the local system back at the framer. When the value is set to 'remote', a signal is sent to the remote system to provide a line loopback.
I32 tmnxDS3ChannelBitErrorInsertionRate	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.10	Integer32	read-create	tmnxDS3ChannelBitErrorInsertionRate is used to insert bit errors for a BERT test. The number of error corresponds to 10^(-rate). A rate of 7 will cause an error rate of 10^(-7), or 1 error in every 10 million bits transmitted. If the value is set to 0, it disables the insertion of bit errors into the BERT. Change in this value while the test is running is accepted but does not take effect until the test gets restarted.
TMN tmnxDS3ChannelBERTPattern	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.11	TmnxDSXBertPattern	read-create	tmnxDS3ChannelBERTPattern indicates the pattern used for the Bit Error Rate Test (BERT). The value of tmnxDS3ChannelBERTDuration indicates the duration of the test. Setting the value of this object to 'none' terminates the test.
U32 tmnxDS3ChannelBERTDuration	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.12	Unsigned32	read-create	tmnxDS3ChannelBERTDuration is used to set the duration of the BERT test.
STR tmnxDS3ChannelMDLEicString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.13	DisplayString	read-create	tmnxDS3ChannelMDLEicString configures the Equipment ID Code(EIC) of the Message Data Link (MDL).
STR tmnxDS3ChannelMDLLicString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.14	DisplayString	read-create	tmnxDS3ChannelMDLLicString configures the Location ID Code(LIC) of the Message Data Link (MDL).
STR tmnxDS3ChannelMDLFicString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.15	DisplayString	read-create	tmnxDS3ChannelMDLFicString configures the Frame ID Code(FIC) of the Message Data Link (MDL).
STR tmnxDS3ChannelMDLUnitString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.16	DisplayString	read-create	tmnxDS3ChannelMDLUnitString configures the Unit ID Code(UIC) of the Message Data Link (MDL).
STR tmnxDS3ChannelMDLPfiString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.17	DisplayString	read-create	tmnxDS3ChannelMDLPfiString configures the Facility ID Code sent in the Message Data Link (MDL) Path message.
STR tmnxDS3ChannelMDLPortString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.18	DisplayString	read-create	tmnxDS3ChannelMDLPortString configures the port number string sent in the Message Data Link (MDL) idle signal message.
STR tmnxDS3ChannelMDLGenString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.19	DisplayString	read-create	tmnxDS3ChannelMDLGenString configures the generator number string sent in the Message Data Link (MDL) test signal message.
BIT tmnxDS3ChannelMDLMessageType	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.20	Bits	read-create	tmnxDS3ChannelMDLMessageType configures the type of MDL message that is transmitted over the DS3 interface. If the value of this object is set to 'none', MDL messages are not transmitted. ds3Path(0) - Enables transmission of the MDL path message. An MDL path message, as defined by ANSI T1.107, is distinguished from idle and test signal messages in that it contains a facility identification code as its final data element. idleSignal(1) - Enables transmission of the MDL idle signal message. An MDL idle signal message, as defined by ANSI T1.107, is distinguished from path and test signal messages in that it contains a port number as its final data element. testSignal(2) - Enables transmission of the MDL test signal message. An MDL test signal message, as defined by ANSI T1.107, is distinguished from path and idle signal messages in that it contains a generator number as its final data element.
T/F tmnxDS3ChannelFEACLoopRespond	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.21	TruthValue	read-create	When tmnxDS3ChannelFEACLoopRespond has a value of 'true', the channel is enabled to respond to remote loop signals. When it has a value of 'false' the port will not respond.
INT tmnxDS3ChannelCRC	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.22	INTEGER	read-create	The value of tmnxDS3ChannelCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the error detection ability, but it also adds some performance overhead. For ATM channels, crc32 is the default and the only value supported and applies to AAL5 CRC calculation on that channel.
U32 tmnxDS3ChannelMTU	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.23	Unsigned32	read-create	The size of the largest packet which can be sent/received on the port, specified in octets. For ports that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the sonet path. Setting tmnxDS3ChannelMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1522 with mode access and encap-type bcp-null 1526 with mode access and encap-type bcp-dot1q 1502 with mode access and encap-type ipcp 4474 with mode access and encap-type frame-relay 1524 with mode access and encap-type atm 2092 with mode access and encap-type cem
U32 tmnxDS3ChannelOperMTU	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.24	Unsigned32	read-only	The negotiated size of the largest packet which can be sent on the channel, specified in octets. For channels that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent.
TMN tmnxDS3ChannelReportAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.25	TmnxDSXReportAlarm	read-create	The value of tmnxDS3ChannelReportAlarm determines when and if to generate notifications for this channel: ais - Reports alarm indication signal errors. ais alarms are issued by default. los - Reports loss of signal errors. los alarms are issued by default. oof - Reports out-of-frame errors. oof alarms are not issued by default. rai - Reports resource availability indicator events. rai alarms are not issued by default. looped - Reports if the far end has forced the near end to loopback. looped alarms are not issued by default. berSd - Reports DS3/E3 signal degradation bit errors. berSd alarms are not issued by default. berSf - Reports DS3/E3 signal failure bit errors. berSf alarms are not issued by default
TMN tmnxDS3ChannelReportAlarmStatus	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.26	TmnxDSXReportAlarm	read-only	The value of tmnxDS3ChannelReportAlarmStatus indicates the current alarms on this port.
TIM tmnxDS3ChannelLastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.27	TimeStamp	read-only	The tmnxDS3ChannelLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS3ChannelEntry row for this port.
T/F tmnxDS3ChannelInFEACLoop	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.28	TruthValue	read-only	tmnxDS3ChannelInFEACLoop indicates whether the remote end has put this channel in FEAC(Far End Alarm Control) loopback.
STR tmnxDS3ChannelMDLMonPortString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.29	DisplayString	read-only	tmnxDS3ChannelMDLMonPortString indicates the port number string received in the Message Data Link (MDL) idle signal message.
STR tmnxDS3ChannelMDLMonGenString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.30	DisplayString	read-only	tmnxDS3ChannelMDLMonGenString indicates the generator number string received in the Message Data Link (MDL) test signal message.
TMN tmnxDS3ChannelBERTOperStatus	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.31	TmnxDSXBertOperStatus	read-only	tmnxDS3ChannelBERTOperStatus indicates the status of the BERT test as specified by TmnxDSXBertOperStatus.
U32 tmnxDS3ChannelBERTSynched	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.32	Unsigned32	read-only	tmnxDS3ChannelBERTSynched is the number of seconds for which the BERT hardware was synchronized. This will be less than or equal to the duration of the last BERT test. It is valid only after tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
C64 tmnxDS3ChannelBERTErrors	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.33	Counter64	read-only	tmnxDS3ChannelBERTErrors is the number of bit errors detected during the last BERT test. It is valid only after tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
C64 tmnxDS3ChannelBERTTotalBits	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.34	Counter64	read-only	tmnxDS3ChannelBERTTotalBits is the total number of bits received during the last BERT test. Bits are only counted when the BERT hardware is synchronized. It is valid only after tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
T/F tmnxDS3ChannelScramble	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.35	TruthValue	read-create	When tmnxDS3ChannelScramble indicates whether scrambling is enabled on this channel. Both ends of the connection must use the same scrambling algorithm. The default value is 'true' if the tmnxPortEncapType is atmEncap for this channel and indicates ATM payload scrambling; otherwise (tmnxPortEncapType is not atmEncap) the default is 'false' and can only be changed to true if the value of tmnxDS3ChannelSubrateCSUMode is digital-link (1)
U32 tmnxDS3ChannelAcctPolicyId	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.36	Unsigned32	read-create	The value of tmnxDS3ChannelAcctPolicyId specifies an existing accounting policy to use for the ds3 channel. Accounting policies can only be associated with network ports or channels. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this channel. A zero value indicates that there is no accounting policy associated with this channel
T/F tmnxDS3ChannelCollectStats	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.37	TruthValue	read-create	The value of tmnxDS3ChannelCollectStats specifies whether or not the collection of accounting and statistical data for the network ds3 channel is collected. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPM will not obtain the results and write them to the billing file. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file.
TMN tmnxDS3ChannelClockSyncState	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.38	TmnxDSXClockSyncState	read-only	The value of tmnxDS3ChannelClockSyncState indicates the current clock synchronization state if tmnxDS3ChannelClockSource is 'adaptive' or 'differential'.
TMN tmnxDS3ChannelClockMasterPortId	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.39	TmnxPortID	read-only	The value of tmnxDS3ChannelClockMasterPortId indicates the current clock synchronization master port id if tmnxDS3ChannelClockSource is 'adaptive' or 'differential'.
tmnxDS1Table	1.3.6.1.4.1.6527.3.1.2.2.4.12		not-accessible	The tmnxDS1Table has an entry for each DS1 channel.
tmnxDS1Entry	1.3.6.1.4.1.6527.3.1.2.2.4.12.1		not-accessible	Each row entry represents a DS1 channel on a IOM card in a chassis in the system. DS1 channel entries for DS3 ports cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when tmnxDS3ChannelChannelized is set to 'true'. DS1 channel entries for DS1 ports can be created and deleted via SNMP SET operations. For each tmnxDS1Entry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
ROW tmnxDS1RowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.1	RowStatus	read-create	tmnxDS1RowStatus controls the creation and deletion of row entries in the tmnxDS1Table. For row creation, the manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme.
INT tmnxDS1Type	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.2	INTEGER	read-only	The value of tmnxDS1Type indicates whether the DS1 channel is in DS1, E1 or J1 mode.
INT tmnxDS1Framing	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.3	INTEGER	read-create	The value of tmnxDS1Framing indicates the type of framing associated with the channel: esf ESF (extended super frame) mode for T1 interfaces. sf SF (super frame) mode for T1 interfaces. g704 G.704 framing format for E1 interfaces. g704-no-crc4 G.704 framing with no CRC4 for E1 interfaces. e1-unframed E1 Unframed (G.703) mode for E1 interfaces. ds1-unframed Unframed mode for T1 interfaces. If tmnxDS1Type is set to 'ds1', the default framing is 'esf'. If tmnxDS1Type is set to 'e1', the default framing is 'g704'. Changing the value of tmnxDS1Framing resets the values of tmnxDS1BerSdThreshold and tmnxDS1BerSfThreshold to defaults and turns off reporting of berSd and berSf alarms in tmnxDS1ReportAlarm.
TMN tmnxDS1IdleCycleFlags	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.4	TmnxDSXIdleCycleFlags	read-create	tmnxDS1IdleCycleFlags configures the value that the DS1 channel transmits during idle cycle.
TMN tmnxDS1Loopback	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.5	TmnxDS1Loopback	read-create	tmnxDS1Loopback is used to put the channel into a loopback mode. The value of tmnxPortAdminStatus should be set to 'outOfService' in order for the loopback to be enabled. A 'line' loopback loops frames received on this port back to the remote system. A 'internal' loopback loops frames from the local system back at the framer. A 'fdlAnsi' requests loopback of type FDL ANSI T1.403. This is valid with tmnxDS1Framing set to 'esf' framing. A 'fdlBellcore' requests loopback of type FDL Bellcore TR-TSY-000312. This is valid with tmnxDS1Framing set to 'esf'. A 'inbandAnsi' requests loopback of type inband ANSI T1.403. This is valid with tmnxDS1Framing set to 'sf'.
T/F tmnxDS1InvertData	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.6	TruthValue	read-create	Setting tmnxDS1InvertData to 'true' causes all data bits to be inverted, to guarantee ones density. It is typically used with AMI line encoding.
I32 tmnxDS1BitErrorInsertionRate	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.7	Integer32	read-create	tmnxDS1BitErrorInsertionRate is used to insert bit errors for a BERT test. The number of error corresponds to 10^(-rate). A rate of 7 will cause an error rate of 10^(-7), or 1 error in every 10 million bits transmitted. If the value is set to 0, disables the insertion of bit errors into the BERT. Change in this value while the test is running is accepted but does not take effect until the test gets restarted.
TMN tmnxDS1BERTPattern	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.8	TmnxDSXBertPattern	read-create	tmnxDS1BERTPattern object indicates the pattern used for the Bit Error Rate Test (BERT). The value of tmnxDS1BERTDuration indicates the duration of the test. Setting the value to 'none' terminates the test.
U32 tmnxDS1BERTDuration	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.9	Unsigned32	read-create	tmnxDS1BERTDuration is used to set the duration of the BERT test.
TMN tmnxDS1ReportAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.10	TmnxDSXReportAlarm	read-create	The value of tmnxDS1ReportAlarm determines when and if to generate notifications for this channel: ais - Reports alarm indication signal errors. ais alarms are issued by default. los - Reports loss of signal errors. los alarms are issued by default. oof - Reports out-of-frame errors. oof alarms are not issued by default. rai - Reports resource availability indicator events. rai alarms are not issued by default. looped - Reports if the far end has forced the near end to loopback. looped alarms are not issued by default. berSd - Reports DS1/E1/J1 signal degradation bit errors. berSd alarms are not issued by default. berSf - Reports DS1/E1/J1 signal failure bit errors. berSf alarms are not issued by default
TMN tmnxDS1ReportAlarmStatus	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.11	TmnxDSXReportAlarm	read-only	The value of tmnxDS1ReportAlarmStatus indicates the current alarms on this channel.
TIM tmnxDS1LastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.12	TimeStamp	read-only	The tmnxDS1LastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS1Entry row for this channel.
TMN tmnxDS1ClockSource	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.13	TmnxDSXClockSource	read-create	tmnxDS1ClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed'), or from a clock recovered from the line's receive data stream ('loopTimed'), or recovered adaptively from the rate at which the data that is received and not from the physical layer ('adaptive'), or recovered from the differential timestamp in the RTP header ('differential').
TMN tmnxDS1BERTOperStatus	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.14	TmnxDSXBertOperStatus	read-only	tmnxDS1BERTOperStatus indicates the status of the BERT test as specified by TmnxDSXBertOperStatus.
U32 tmnxDS1BERTSynched	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.15	Unsigned32	read-only	tmnxDS1BERTSynched is the number of seconds for which the BERT hardware was synchronized. This will be less than or equal to the duration of the last BERT test. It is valid only after tmnxDS1BERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
C64 tmnxDS1BERTErrors	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.16	Counter64	read-only	tmnxDS1BERTErrors is the number of bit errors detected during the last BERT test. It is valid only after tmnxDS1BERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
C64 tmnxDS1BERTTotalBits	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.17	Counter64	read-only	tmnxDS1BERTTotalBits is the total number of bits received during the last BERT test. Bits are only counted when the BERT hardware is synchronized. It is valid only after tmnxDS1BERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
T/F tmnxDS1RemoteLoopRespond	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.18	TruthValue	read-create	When tmnxDS1RemoteLoopRespond has a value of 'true', the channel is enabled to respond to remote loop signals. When it has a value of 'false' the port will not respond.
T/F tmnxDS1InRemoteLoop	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.19	TruthValue	read-only	tmnxDS1InRemoteLoop indicates whether the remote end has put this channel in remote loopback.
TMN tmnxDS1InsertSingleBitError	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.20	TmnxActionType	read-create	tmnxDS1InsertSingleBitError is used to insert a single bit error for a BERT test.
INT tmnxDS1SignalMode	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.21	INTEGER	read-create	The value of tmnxDS1SignalMode indicates the type of signalling associated with the channel: none - Indicates no signalling on this channel. cas - Indicates Channel Associated Signalling (CAS) on this channel. The default signalling is 'none'.
TMN tmnxDS1ClockSyncState	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.22	TmnxDSXClockSyncState	read-only	The value of tmnxDS1ClockSyncState indicates the current clock synchronization state if tmnxDS1ClockSource is 'adaptive' or 'differential'.
TMN tmnxDS1ClockMasterPortId	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.23	TmnxPortID	read-only	The value of tmnxDS1ClockMasterPortId indicates the current clock synchronization master port id if tmnxDS1ClockSource is 'adaptive' or 'differential'.
U32 tmnxDS1BerSdThreshold	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.24	Unsigned32	read-create	The value of tmnxDS1BerSdThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortDS1Alarm notification for a BER SD failure and a tmnxEqPortDS1AlarmClear notification for a BER SD failure clear. Bit error computed must reach/exceed threshold value over a pre-defined period of time for the tmnxEqPortSonetAlarm notification to be sent. The value of tmnxDS1Framing defines how the bit error is computed and what values of tmnxDS1BerSdThreshold are allowed. The following table defines this dependency: tmnxDS1Framing Bit error calculation and value supported -------------- ----------------------------------------- esf (1) each CRC error is counted as one bit error g704 (4) values supported are 1,5,10,50,100 other values bit error alarms not supported, value of tmnxDS1BerSdThreshold set to default and cannot be changed tmnxDS1BerSdThreshold value must not exceed the value of tmnxDS1BerSfThreshold.
U32 tmnxDS1BerSfThreshold	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.25	Unsigned32	read-create	The value of tmnxDS1BerSfThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortDS1Alarm notification for a BER SF failure and a tmnxEqPortDS1AlarmClear notification for a BER SF failure clear. Bit error computed must reach/exceed threshold value over a pre-defined period of time for the tmnxEqPortSonetAlarm notification to be sent. The value of tmnxDS1Framing defines how the bit errors are computed and what values of tmnxDS1BerSfThreshold are allowed. The following table defines this dependency: tmnxDS1Framing Bit error calculation and value supported -------------- ----------------------------------------- esf (1) each CRC error is counted as one bit error g704 (4) values supported are 1,5,10,50,100 other values bit error alarms not supported, value of tmnxDS1BerSfThreshold set to default and cannot be changed tmnxDS1BerSfThreshold value must not be smaller than tmnxDS1BerSdThreshold value
tmnxDS0ChanGroupTable	1.3.6.1.4.1.6527.3.1.2.2.4.13		not-accessible	The tmnxDS0ChanGroupTable has an entry for DS0 channels grouped together and belonging to a particular DS1 channel.
tmnxDS0ChanGroupEntry	1.3.6.1.4.1.6527.3.1.2.2.4.13.1		not-accessible	Each row entry represents one or more DS0 channels on a DS1 interface. tmnxDS0ChanGroupTimeSlots object is used to add or remove DS0 channels from the group. Entries can be created and deleted via SNMP SET operations using the tmnxDS0ChanGroupRowStatus object. For each tmnxDS0ChanGroupEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
ROW tmnxDS0ChanGroupRowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.1	RowStatus	read-create	tmnxDS0ChanGroupRowStatus controls the creation and deletion of row entries in the tmnxDS0ChanGroupTable. The tmnxPortPortID for a channel group includes a group ID in the lower bits. The manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme.
TMN tmnxDS0ChanGroupTimeSlots	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.2	TmnxDs0ChannelList	read-create	tmnxDS0ChanGroupTimeSlots is a bitmap which is used to add/remove DS0 timeslots from a channel group. The description for TmnxDs0ChannelList contains details of the bitmap organization. When a channel group is created on unframed DS1/E1, all timeslots as applicable to a given speed are auto-allocated and cannot be changed. When a channel group is created on a framed DS1/E1 or existing channel group's encapsulation is changed from ATM, the default of no timeslots is auto-assigned to the group. When a channel group on a framed DS1/E1 is configured for ATM encapsulation, the ATM defaults of 0x00FFFFFF (DS1) and 0XFFFEFFFE (E1) are auto-assigned and cannot be changed.
INT tmnxDS0ChanGroupSpeed	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.3	INTEGER	read-create	tmnxDS0ChanGroupSpeed configures the required link speed for all the time slots included in this channel group.
INT tmnxDS0ChanGroupCRC	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.4	INTEGER	read-create	The value of tmnxDS0ChanGroupCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the error detection ability, but it also adds some performance overhead. For channel groups with encapsulation set to ATM, the default and only supported value is crc32 and applies to AAL5 CRC calculations on that channel group.
U32 tmnxDS0ChanGroupMTU	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.5	Unsigned32	read-create	The size of the largest packet which can be sent/received on the channel group, specified in octets. For groups that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent. Setting tmnxDS0ChanGroupMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1522 with mode access and encap-type bcp-null 1526 with mode access and encap-type bcp-dot1q 1502 with mode access and encap-type ipcp 4474 with mode access and encap-type frame-relay 1524 with mode access and encap-type atm 2092 with mode access and encap-type cem
U32 tmnxDS0ChanGroupOperMTU	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.6	Unsigned32	read-only	The negotiated size of the largest packet which can be sent on the channel group, specified in octets. For channel groups that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent.
TIM tmnxDS0ChanGroupLastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.7	TimeStamp	read-only	The tmnxDS0ChanGroupLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS0ChanGroupEntry row for this channel group.
TMN tmnxDS0ChanGroupIdleCycleFlags	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.8	TmnxDSXIdleCycleFlags	read-create	tmnxDS0ChanGroupIdleCycleFlags configures the value that the channel group transmits during idle cycle. The default value applies to HDLC channels only. For ATM and CEM channels the object does not really apply so a default value of 'none' is used and cannot be changed.
T/F tmnxDS0ChanGroupScramble	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.9	TruthValue	read-create	tmnxDS0ChanGroupScramble indicates whether payload scrambling is enabled on this ATM channel. Both ends of the connection must use the same scrambling algorithm. The default value is 'true' if the tmnxPortEncapType is atmEncap for this channel, otherwise the default is 'false' and not allowed to change.
U32 tmnxDS0ChanGroupAcctPolicyId	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.10	Unsigned32	read-create	The value of tmnxDS0ChanGroupAcctPolicyId specifies an existing accounting policy to use for the ds0 channel-group. Accounting policies can only be associated with network ports or channels. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this channel-group. A zero value indicates that there is no accounting policy associated with this channel
T/F tmnxDS0ChanGroupCollectStats	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.11	TruthValue	read-create	The value of tmnxDS0ChanGroupCollectStats specifies whether or not the collection of accounting and statistical data for the network ds0 channel-group is collected. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPM will not obtain the results and write them to the billing file. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file.
TMN tmnxDS0ChanGroupPayloadFillType	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.12	TmnxDSXIdleFillType	read-create	The value of tmnxDS0ChanGroupPayloadFillType specifies the type of idle payload fill to be sent when the CEM channel group experiences an underrun. If the type is set to 'userDefinedPattern' then the value of tmnxDS0ChanGroupPayloadPattern is used to define the payload pattern. The default value depends on the encap type of the channel group: For CEM encap - 'allOnes' For all other encaps - 'notApplicable' For a ds1-unframed and e1-unframed CEM encap DS0 channel group the only supported value is 'allOnes'. For non-CEM encap channel groups the value cannot be changed.
U32 tmnxDS0ChanGroupPayloadPattern	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.13	Unsigned32	read-create	The value of tmnxDS0ChanGroupPayloadPattern specifies the idle payload fill pattern when the CEM channel group experiences an underrun and tmnxDS0ChanGroupPayloadFillType is set to 'userDefinedPattern'. The default value depends on the encap type of the channel group: For CEM encap channel group - 255 (Valid range 0..255) For non-CEM encap channel group - 0 (Valid range 0..0).
TMN tmnxDS0ChanGroupSignalFillType	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.14	TmnxDSXIdleFillType	read-create	The value of tmnxDS0ChanGroupSignalFillType specifies the type of idle signal fill to be sent when the CAS CEM channel group experiences an underrun. If the type is set to 'userDefinedPattern' then the value of tmnxDS0ChanGroupSignalPattern is used to define the signal pattern. The default value depends on the encap of the DS0 channel group and the signal-mode of the DS1/E1: For CEM encap on DS1/E1 with CAS signal mode - 'allOnes' For all other encaps or non-CAS CEM DS1/E1 - 'notApplicable' For CEM channel groups on DS1/E1 with no CAS signalling and non-CEM encap channel groups the value cannot be changed.
U32 tmnxDS0ChanGroupSignalPattern	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.15	Unsigned32	read-create	The value of tmnxDS0ChanGroupSignalPattern specifies the idle signal fill pattern when the CAS CEM channel group experiences an underrun and tmnxDS0ChanGroupSignalFillType is set to 'userDefinedPattern'. CAS ESF DS1 and CAS E1 support 4 signalling bits per timeslot (ABCD) CAS SF DS1 supports 2 signalling bits per timeslot (AB) The default value depends on the type of channel group: For CAS DS1 ESF or CAS E1 channel group - 15 (Valid range 0..15) For CAS DS1 SF channel group - 3 (Valid range 0..3) For non-CAS or non-CEM channel group - 0 (Valid range 0..0)
tmnxBundleTable	1.3.6.1.4.1.6527.3.1.2.2.4.14		not-accessible	The tmnxBundleTable has an entry for a bundle created on the system.
tmnxBundleEntry	1.3.6.1.4.1.6527.3.1.2.2.4.14.1		not-accessible	Each row entry represents a multilink bundle on a MDA. Entries can be created and deleted via SNMP SET operations using the tmnxBundleRowStatus object. The tmnxBundleBundleID will contain the bundle number encoded in it. The bundle number is unique for a MDA. For each tmnxBundleEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
TMN tmnxBundleBundleID	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.1	TmnxBundleID	not-accessible	tmnxBundleBundleID identifies this multilink bundle. The value of this object is calculated using the TiMOS encoding scheme described in TmnxBundleID. tmnxBundleBundleID is used as an index into the ifTable and the tmnxPortTable to access an entry corresponding to this entry.
ROW tmnxBundleRowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.2	RowStatus	read-create	tmnxBundleRowStatus controls the creation and deletion of row entries in the tmnxBundleTable. The manager has to first calculate the tmnxBundleBundleID based on the TiMOS encoding.
INT tmnxBundleType	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.3	INTEGER	read-create	tmnxBundleType specifies the type of this multilink bundle. It provides a reference as to the type of bundle this row refers to but does not map to the direct value of bndle type defined in TmnxBundleID.
U32 tmnxBundleMinimumLinks	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.4	Unsigned32	read-create	tmnxBundleMinimumLinks is the minimum number of links that must be active for a bundle to be active. If the number of links drop below the given minimum then the multilink bundle will transition to an operation down state.
U32 tmnxBundleNumLinks	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.5	Unsigned32	read-only	tmnxBundleNumLinks indicates the total number of links configured for this bundle.
U32 tmnxBundleNumActiveLinks	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.6	Unsigned32	read-only	tmnxBundleNumActiveLinks indicates the current number of active links belonging to this bundle.
U32 tmnxBundleMRRU	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.7	Unsigned32	read-create	tmnxBundleMRRU is used to configure the Max Received Reconstructed Unit (MRRU). This is the maximum frame that can be reconstructed from multilink fragments. This object is only applicable to tmnxBundleType values of mlppp or mlfr. All non applicable types have a value of zero.
U32 tmnxBundleOperMRRU	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.8	Unsigned32	read-only	tmnxBundleOperMRRU indicates the operational value of Max Received Reconstructed Unit (MRRU). This object is only applicable to tmnxBundleType values of mlppp or mlfr. All non applicable types have a value of zero.
U32 tmnxBundlePeerMRRU	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.9	Unsigned32	read-only	tmnxBundlePeerMRRU indicates the MRRU value sent by the peer during negotiation. This object is only applicable to tmnxBundleType values of mlppp or mlfr. All non applicable types have a value of zero.
U32 tmnxBundleOperMTU	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.10	Unsigned32	read-only	tmnxBundleOperMTU indicates the operational MTU of the bundle.
U32 tmnxBundleRedDiffDelay	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.11	Unsigned32	read-create	tmnxBundleRedDiffDelay configures the maximum acceptable differential delay for individual circuits within this multilink bundle. If the delay exceeds this threshold, a tmnxEqPortBndlRedDiffExceeded trap is issued. For a tmnxBundleType value of 'imagrp' a range of 0 to 50 is supported, 0 to 25 otherwise.
INT tmnxBundleRedDiffDelayAction	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.12	INTEGER	read-create	tmnxBundleRedDiffDelayAction specifies the action to be taken when the differential delay exceeds the threshold configured in tmnxBundleRedDiffDelay. For a tmnxBundleType value of 'imagrp', only the down action is supported.
U32 tmnxBundleYellowDiffDelay	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.13	Unsigned32	read-create	tmnxBundleYellowDiffDelay configures the yellow warning threshold for the differential delay for the circuits within a given multilink bundle. If the delay exceeds this threshold, a tmnxEqPortBndlYellowDiffExceeded trap is issued. This object is only applicable to tmnxBundleType values of 'mlppp' or 'mlfr'. All non applicable types have a value of zero.
T/F tmnxBundleShortSequence	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.14	TruthValue	read-create	tmnxBundleShortSequence command specifies that the MLPPP bundle should use short (12 bit) sequence numbers. Instead of the standard long (24 bits) sequence number. This object is only applicable to tmnxBundleType values of mlppp.
TIM tmnxBundleLastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.15	TimeStamp	read-only	The tmnxBundleLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxBundleEntry row for this channel group.
U32 tmnxBundleFragmentThreshold	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.16	Unsigned32	read-create	The value of tmnxBundleFragmentThreshold specifies the maximum length of a fragment transmitted across the multilink bundle. Values supported within each bundle type are H/W dependent. The value of 0 specifies no fragmentation. Currently, the following values are supported depending upon the tmnxBundleType value: tmnxBundleType tmnxBundleFragmentThreshold values supported mlppp 0; 128 to 512 inclusive imagrp 128
U32 tmnxBundleUpTime	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.17	Unsigned32	read-only	tmnxBundleUpTime indicates the time since the bundle is operationally 'inService'.
C32 tmnxBundleInputDiscards	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.18	Counter32	read-only	tmnxBundleInputDiscards indicates the number of LCP packets that were discarded. This object is only supported for a tmnxBundleType value of mlppp.
TMN tmnxBundlePrimaryMemberPortID	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.19	TmnxPortID	read-only	tmnxBundlePrimaryMemberPortID indicates the TmnxPortID of the primary member of this bundle. The value of this object will be zero if there are no members configured in this bundle.
T/F tmnxBundleLFI	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.20	TruthValue	read-create	tmnxBundleLFI specifies if Link Fragmentation and Interleaving is enabled on the multilink bundle. A value of 'false' indicates that Link Fragmentation and Interleaving is disabled on the multilink bundle while a value of 'true' indicates that Link Fragmentation and Interleaving is enabled on the multilink bundle. This object is only supported for tmnxBundleType value of mlppp. The value of tmnxBundleLFI may be modified only when no members are part of the bundle. This object cannot be set to true when tmnxBundleMlpppClassCount object value is set to enable Multiclass MLPPP on the bundle.
INT tmnxBundleProtectedType	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.21	INTEGER	read-create	tmnxBundleProtectedType identifies how this bundle is part of a tmnxBundleParentBundle. A value of 'none' identifies no protection, 'working' identifies it to be a working bundle of a tmnxBundleParentBundle and 'protection' identifies it to be a protection bundle of a tmnxBundleParentBundle. tmnxBundleProtectedType can only be set at row creation.
TMN tmnxBundleParentBundle	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.22	TmnxBundleID	read-create	tmnxBundleParentBundle specifies the parent to which this bundle belongs. A row for the given non zero walue of tmnxBundleParentBundle must exist for this row to be successfully created. If a bundle has no parent, its value is zero. tmnxBundleParentBundle can only be set at row creation.
tmnxBundleMemberTable	1.3.6.1.4.1.6527.3.1.2.2.4.15		not-accessible	The tmnxBundleMemberTable has an entry for a member port associated with a multilink bundle.
tmnxBundleMemberEntry	1.3.6.1.4.1.6527.3.1.2.2.4.15.1		not-accessible	Each row represents a port associated with a bundle. Entries can be added or removed from this table using SNMP SET operation.
ROW tmnxBundleMemberRowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.15.1.1	RowStatus	read-create	tmnxBundleMemberRowStatus controls the creation and deletion of row entries in the tmnxBundleMemberTable. tmnxPortPortID identifies the port to be associated with the bundle. A bundle entry with tmnxBundleBundleID has to exist in the tmnxBundleTable before creating an entry in this table.
T/F tmnxBundleMemberActive	1.3.6.1.4.1.6527.3.1.2.2.4.15.1.2	TruthValue	read-only	tmnxBundleMemberActive is set to 'false' for one of reasons in tmnxBundleMemberDownReason.
INT tmnxBundleMemberDownReason	1.3.6.1.4.1.6527.3.1.2.2.4.15.1.3	INTEGER	read-only	tmnxBundleMemberDownReason contains the reason code for marking the member link of the bundle to down (i.e. tmnxBundleMemberActive will be set to false): none - The link is active and the value of tmnxBundleMemberActive is 'true'. outOfService - The link operational status is down. redDiffDelayExceeded - The differential delay of the link exceeded the configured value of red differential delay and tmnxBundleRedDiffDelayAction was configured as 'down'. mismatchEndPtDiscriminator - Detected inconsistent peer endpoint discriminator for the bundle. peerNotBundleMember - When the peer is either not added to the bundle or is removed from the bundle. underNegotiation - When the local end is trying to negotiate with the peer. peerInvalidMlHdrFmt - The peer does not support the required ML-PPP header format. The remote peer must support the same short/long sequence code, and at least as many classes as configured for the local bundle.
U32 tmnxBundleMemberUpTime	1.3.6.1.4.1.6527.3.1.2.2.4.15.1.4	Unsigned32	read-only	tmnxBundleMemberUpTime indicates the time since the bundle member is active as indicated by tmnxBundleMemberActive.
tmnxPortToChannelTable	1.3.6.1.4.1.6527.3.1.2.2.4.16		not-accessible	The tmnxPortToChannelTable is a mapping table. Given a chassis index, physical port index and channel string, it maps it to the index of the channel. This channel index can then be used as an index into the ifTable or the tmnxPortTable.
tmnxPortToChannelEntry	1.3.6.1.4.1.6527.3.1.2.2.4.16.1		not-accessible	Each row represents a mapping of the physical port index and the channel index string to the index of the channel.
STR tmnxChannelIdxString	1.3.6.1.4.1.6527.3.1.2.2.4.16.1.1	DisplayString	not-accessible	tmnxChannelIdxString is an index into the table. It contains a string identifying a channel on the physical port.
TMN tmnxChannelPortID	1.3.6.1.4.1.6527.3.1.2.2.4.16.1.2	TmnxPortID	read-only	tmnxChannelPortID contains the port ID of the channel. This value is used to identify the entry for this channel in the ifTable or the tmnxPortTable.
tmnxPortIngrMdaQosStatTable	1.3.6.1.4.1.6527.3.1.2.2.4.17		not-accessible	The table tmnxPortIngrMdaQosStatTable contains a row for each ethernet port located on an oversubscribed MDA.
tmnxPortIngrMdaQosStatEntry	1.3.6.1.4.1.6527.3.1.2.2.4.17.1		not-accessible	Each row entry indicates the MDA QoS discard statistics for an ethernet port located on an oversubscribed MDA. tmnxPortEtherIngressRate object in the tmnxPortEtherTable indicates the ingress rate configured for the port.
C64 tmnxPortIngrMdaQos00StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.1	Counter64	read-only	tmnxPortIngrMdaQos00StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos00StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.2	Counter64	read-only	tmnxPortIngrMdaQos00StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos01StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.3	Counter64	read-only	tmnxPortIngrMdaQos01StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos01StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.4	Counter64	read-only	tmnxPortIngrMdaQos01StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos02StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.5	Counter64	read-only	tmnxPortIngrMdaQos02StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos02StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.6	Counter64	read-only	tmnxPortIngrMdaQos02StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos03StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.7	Counter64	read-only	tmnxPortIngrMdaQos03StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos03StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.8	Counter64	read-only	tmnxPortIngrMdaQos03StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos04StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.9	Counter64	read-only	tmnxPortIngrMdaQos04StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos04StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.10	Counter64	read-only	tmnxPortIngrMdaQos04StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos05StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.11	Counter64	read-only	tmnxPortIngrMdaQos05StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos05StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.12	Counter64	read-only	tmnxPortIngrMdaQos05StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos06StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.13	Counter64	read-only	tmnxPortIngrMdaQos06StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos06StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.14	Counter64	read-only	tmnxPortIngrMdaQos06StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos07StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.15	Counter64	read-only	tmnxPortIngrMdaQos07StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos07StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.16	Counter64	read-only	tmnxPortIngrMdaQos07StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos08StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.17	Counter64	read-only	tmnxPortIngrMdaQos08StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos08StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.18	Counter64	read-only	tmnxPortIngrMdaQos08StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos09StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.19	Counter64	read-only	tmnxPortIngrMdaQos09StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos09StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.20	Counter64	read-only	tmnxPortIngrMdaQos09StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos10StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.21	Counter64	read-only	tmnxPortIngrMdaQos10StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos10StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.22	Counter64	read-only	tmnxPortIngrMdaQos10StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos11StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.23	Counter64	read-only	tmnxPortIngrMdaQos11StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos11StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.24	Counter64	read-only	tmnxPortIngrMdaQos11StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos12StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.25	Counter64	read-only	tmnxPortIngrMdaQos12StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos12StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.26	Counter64	read-only	tmnxPortIngrMdaQos12StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos13StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.27	Counter64	read-only	tmnxPortIngrMdaQos13StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos13StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.28	Counter64	read-only	tmnxPortIngrMdaQos13StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos14StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.29	Counter64	read-only	tmnxPortIngrMdaQos14StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos14StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.30	Counter64	read-only	tmnxPortIngrMdaQos14StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos15StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.31	Counter64	read-only	tmnxPortIngrMdaQos15StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos15StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.32	Counter64	read-only	tmnxPortIngrMdaQos15StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
tmnxSonetGroupTable	1.3.6.1.4.1.6527.3.1.2.2.4.18		not-accessible	The tmnxSonetGroupTable has an entry for each Tributary Unit Group(TUG3) on a path. On a port which supports unchannelized STS-3's, rows in this table are created when a channelized STS-3 has its tmnxSonetPathChildType set to sdhTug3. On a port which does not support unchannelized STS-3's, the rows in this table are implicitly created when a STS-3 is created in the tmnxSonetPathTable. Entries in this table are implicitly deleted when the parent entry of this group is deleted from the tmnxSonetPathTable or if the tmnxSonetPathChildType of the parent is set to something other than sdhTug3.
tmnxSonetGroupEntry	1.3.6.1.4.1.6527.3.1.2.2.4.18.1		not-accessible	Each row entry represents a Tributary Unit Group(TUG3) on a path.
TMN tmnxSonetGroupType	1.3.6.1.4.1.6527.3.1.2.2.4.18.1.1	TmnxMDAChanType	read-only	tmnxSonetGroupType indicates the sonet group type of this entry. For STS-3/STM-1 channelization, the value of this object will be 'sdhTug3'.
TMN tmnxSonetGroupParentPortID	1.3.6.1.4.1.6527.3.1.2.2.4.18.1.2	TmnxPortID	read-only	tmnxSonetGroupParentPortID indicates the TmnxPortID of the parent of this group.
TMN tmnxSonetGroupChildType	1.3.6.1.4.1.6527.3.1.2.2.4.18.1.3	TmnxMDAChanType	read-write	tmnxSonetGroupChildType is used to configure the type of the children of this group. Based on the value of this object, entries of a certain channel type can be created in the tmnxSonetPathTable. For example, if the value of this object is set to 'sonetVt15', then 28 entries of type 'sonetVt15' can be created in the tmnxSonetPathTable.
TNA tmnxSonetGroupName	1.3.6.1.4.1.6527.3.1.2.2.4.18.1.4	TNamedItemOrEmpty	read-only	tmnxSonetGroupName is the textual name for this sonet group.
tmnxPortScalarObjs	1.3.6.1.4.1.6527.3.1.2.2.4.19
T/F tmnxL4LoadBalancing	1.3.6.1.4.1.6527.3.1.2.2.4.19.1	TruthValue	read-write	The value of tmnxL4LoadBalancing specifies whether layer 4 information, src and dst ports, should be used in the LAG and ECMP hashing algorithm. This is the global system setting that all ports will inherit. When set to 'true', src and dst ports are used in the hashing algorithm. The per port setting of tmnxPortLoadBalanceAlgorithm can override tmnxL4LoadBalancing.
tmnxCiscoHDLCTable	1.3.6.1.4.1.6527.3.1.2.2.4.20		not-accessible	The tmnxCiscoHDLCTable has an entry for each port in the system that is configured for Cisco HDLC. It contains the parameters related to Cisco HDLC protocol on this port.
tmnxCiscoHDLCEntry	1.3.6.1.4.1.6527.3.1.2.2.4.20.1		not-accessible	The tmnxCiscoHDLCEntry specifies parameters for a particular interfaces running Cisco HDLC encapsulation. Entries cannot be created and deleted via SNMP SET operations.
U32 tmnxCiscoHDLCKeepAliveInt	1.3.6.1.4.1.6527.3.1.2.2.4.20.1.1	Unsigned32	read-create	tmnxCiscoHDLCKeepAliveInt specifies the interval in seconds used for sending periodic keepalive packets. The default value is set to 10 seconds. A value of 0 specifies that the keepalive function is turned off. It is expected that the nodes at the two endpoints of the Cisco HDLC link are provisioned with the same values.
U32 tmnxCiscoHDLCUpCount	1.3.6.1.4.1.6527.3.1.2.2.4.20.1.2	Unsigned32	read-create	tmnxCiscoHDLCUpCount specifies the number of continual keepalive packets that has to be received to declare the link up. It is expected that the nodes at the two endpoints of the Cisco HDLC link are provisioned with the same values.
U32 tmnxCiscoHDLCDownCount	1.3.6.1.4.1.6527.3.1.2.2.4.20.1.3	Unsigned32	read-create	tmnxCiscoHDLCDownCount specifies the number of 'tmnxCiscoHDLCKeepAliveInt' intervals that must pass without receiving a keepalive packet before the link is declared down. It is expected that the nodes at the two endpoints of the Cisco HDLC link are provisioned with the same values.
TMN tmnxCiscoHDLCOperState	1.3.6.1.4.1.6527.3.1.2.2.4.20.1.4	TmnxOperState	read-only	The value of tmnxCiscoHDLCOperState indicates the operational status of the Cisco HDLC protocol for this port.
tmnxBundleImaGrpTable	1.3.6.1.4.1.6527.3.1.2.2.4.21		not-accessible	The tmnxBundleImaGrpTable contains IMA Group data
tmnxBundleImaGrpEntry	1.3.6.1.4.1.6527.3.1.2.2.4.21.1		not-accessible	Each row entry contains data on an IMA Group.
U32 tmnxBundleImaGrpLnkActTimer	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.1	Unsigned32	read-create	tmnxBundleImaGrpLnkActTimer specifies the Link Activation Timer used to clear an existing LIF, LODS and FRI-IMA alarm. The time specified determines how long is needed for member links to stabilize before being activated.
U32 tmnxBundleImaGrpLnkDeactTimer	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.2	Unsigned32	read-create	tmnxBundleImaGrpLnkDeactTimer specifies the Link Deactivation Timer used to raise an LIF, LODS and FRI-IMA alarm. The time specified determines how long before a member link is declared in error and is deactivated.
INT tmnxBundleImaGrpSymmetryMode	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.3	INTEGER	read-create	tmnxBundleImaGrpSymmetryMode specifies the type of cell rate transfer over the virtual link.
INT tmnxBundleImaGrpTxId	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.4	INTEGER	read-only	tmnxBundleImaGrpTxId specifies the IMA Id generated at group creation time used by the near-end.
INT tmnxBundleImaGrpRxId	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.5	INTEGER	read-only	tmnxBundleImaGrpRxId specifies the IMA ID generated at group creation time used by the far-end.
TMN tmnxBundleImaGrpTxRefLnk	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.6	TmnxPortID	read-only	tmnxBundleImaGrpTxRefLnk specifies the IMA bundle member that was selected to be the transmit timing reference link. If no member has been selected as the reference link a value of zero is returned.
TMN tmnxBundleImaGrpRxRefLnk	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.7	TmnxPortID	read-only	tmnxBundleImaGrpRxRefLnk specifies the IMA bundle member that was detected to be the receive timing reference link. If no member has been detected as the reference link a value of zero is returned.
TMN tmnxBundleImaGrpSmNeState	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.8	TmnxImaGrpState	read-only	tmnxBundleImaGrpSmNeState specifies the current state of the IMA Group for the near-end.
TMN tmnxBundleImaGrpSmFeState	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.9	TmnxImaGrpState	read-only	tmnxBundleImaGrpSmFeState specifies the current state of the IMA Group for the far-end.
TMN tmnxBundleImaGrpSmFailState	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.10	TmnxImaGrpFailState	read-only	tmnxBundleImaGrpSmFailState specifies the current state of the IMA Group.
C32 tmnxBundleImaGrpSmDownSecs	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.11	Counter32	read-only	tmnxBundleImaGrpSmDownSecs specifies the number of seconds that the IMA Group State Machine is not Operational.
C32 tmnxBundleImaGrpSmOperSecs	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.12	Counter32	read-only	tmnxBundleImaGrpSmOperSecs specifies the number of seconds that the IMA Group State Machine has been in the Operational State.
G32 tmnxBundleImaGrpAvailTxCR	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.13	Gauge32	read-only	tmnxBundleImaGrpAvailTxCR specifies the available transmit bandwidth on this IMA group. It only considers members that are in the Active State.
G32 tmnxBundleImaGrpAvailRxCR	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.14	Gauge32	read-only	tmnxBundleImaGrpAvailRxCR specifies the available bandwidth on this IMA group in the receive direction. It only considers members that are in the Active State.
C32 tmnxBundleImaGrpNeFails	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.15	Counter32	read-only	tmnxBundleImaGrpNeFails specifies the number of reported IMA Group failures since boot time.
C32 tmnxBundleImaGrpFeFails	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.16	Counter32	read-only	tmnxBundleImaGrpFeFails specifies the number of reported IMA Group far-end failures since boot time.
C32 tmnxBundleImaGrpTxIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.17	Counter32	read-only	tmnxBundleImaGrpTxIcpCells specifies number of transmitted ICP cells for this IMA Group.
C32 tmnxBundleImaGrpRxIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.18	Counter32	read-only	tmnxBundleImaGrpRxIcpCells specifies number of received ICP cells for this IMA Group.
C32 tmnxBundleImaGrpErrorIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.19	Counter32	read-only	tmnxBundleImaGrpErrorIcpCells specifies number of ICP cells with HEC or CRC-10 errors.
C32 tmnxBundleImaGrpLostRxIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.20	Counter32	read-only	tmnxBundleImaGrpLostRxIcpCells specifies the number of missing ICP cells at the expected offset.
INT tmnxBundleImaGrpTxOamLablVal	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.21	INTEGER	read-only	tmnxBundleImaGrpTxOamLablVal specifies near-end value to be transmitted.
INT tmnxBundleImaGrpRxOamLablVal	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.22	INTEGER	read-only	tmnxBundleImaGrpRxOamLablVal specifies far-end value received.
INT tmnxBundleImaGrpAlphaValue	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.23	INTEGER	read-create	tmnxBundleImaGrpAlphaValue specifies the number of consecutive ICP cells that need to be detected before moving from the IMA Sync State to the IMA Hunt State.
INT tmnxBundleImaGrpBetaValue	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.24	INTEGER	read-create	tmnxBundleImaGrpBetaValue specifies the number of consecutive errored ICP cells that need to be detected before moving from the IMA Sync State to the IMA Hunt State
INT tmnxBundleImaGrpGammaValue	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.25	INTEGER	read-create	tmnxBundleImaGrpGammaValue specifies the number of consecutive valid ICP cells that need to be detected before moving from the IMA pre-Sync State to the IMA Hunt State.
TMN tmnxBundleImaGrpNeClockMode	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.26	TmnxImaGrpClockModes	read-create	tmnxBundleImaGrpNeClockMode specifies near-end transmit clock mode.
TMN tmnxBundleImaGrpFeClockMode	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.27	TmnxImaGrpClockModes	read-create	tmnxBundleImaGrpFeClockMode specifies far-end transmit clock mode.
TMN tmnxBundleImaGrpVersion	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.28	TmnxImaGrpVersion	read-create	tmnxBundleImaGrpVersion specifies the IMA Version for this group.
U32 tmnxBundleImaGrpMaxConfBw	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.29	Unsigned32	read-create	tmnxBundleImaGrpMaxConfBw specifies the number of links that is used to determine the maximum configurable bandwidth that is allowed to be used for this IMA group.
TMN tmnxBundleImaGrpTestState	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.30	TmnxImaTestState	read-create	tmnxBundleImaGrpTestState specifies the current state of the test pattern procedure. A value of 'disabled' specifies that the group is currently not running. A value of 'operating' enables the test pattern procedure. The test pattern procedure continues until it is 'disabled'.
TMN tmnxBundleImaGrpTestMember	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.31	TmnxPortID	read-create	tmnxBundleImaGrpTestMember specifies a member link to be used for the test pattern procedure. A value of zero indicates that no member link has been selected. When tmnxBundleImaGrpTestState does not have the value 'disabled', an attempt to set this object will be rejected with an inconsistentValue error.
INT tmnxBundleImaGrpTestPattern	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.32	INTEGER	read-create	tmnxBundleImaGrpTestPattern specifies the Transmit Test Pattern in an IMA group loopback operation. This value may only be changed when tmnxBundleImaGrpTestState is 'disabled'.
U32 tmnxBundleImaGrpDiffDelayMaxObs	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.33	Unsigned32	read-only	tmnxBundleImaGrpDiffDelayMaxObs indicates the latest maximum differential delay observed between links having the least and most link propagation delay among the received links configured in this IMA group.
U32 tmnxBundleImaGrpLeastDelayLink	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.34	Unsigned32	read-only	tmnxBundleImaGrpLeastDelayLink indicates a member link which has the smallest link propagation delay. If this delay has yet to be determined or no member link has been configured, a value of zero is returned.
tmnxBundleMemberImaTable	1.3.6.1.4.1.6527.3.1.2.2.4.22		not-accessible	The tmnxBundleMemberImaTable has an entry for an IMA link associated with an IMA Group.
tmnxBundleMemberImaEntry	1.3.6.1.4.1.6527.3.1.2.2.4.22.1		not-accessible	Each row entry represents an IMA link associated with an IMA Group.
TMN tmnxBundleMemberImaNeTxState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.1	TmnxImaLnkState	read-only	tmnxBundleMemberImaNeTxState indicates the state of near-end transmit IMA link.
TMN tmnxBundleMemberImaNeRxState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.2	TmnxImaLnkState	read-only	tmnxBundleMemberImaNeRxState indicates the state of near-end receive IMA link.
TMN tmnxBundleMemberImaFeTxState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.3	TmnxImaLnkState	read-only	tmnxBundleMemberImaFeTxState indicates the state of far-end transmit IMA link.
TMN tmnxBundleMemberImaFeRxState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.4	TmnxImaLnkState	read-only	tmnxBundleMemberImaFeRxState indicates the state of far-end receive IMA link.
TMN tmnxBundleMemberImaNeRxFailState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.5	TmnxImaLnkFailState	read-only	tmnxBundleMemberImaNeRxFailState indicates the IMA link failure reason for the near-end.
TMN tmnxBundleMemberImaFeRxFailState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.6	TmnxImaLnkFailState	read-only	tmnxBundleMemberImaFeRxFailState indicates the IMA link failure reason for the far-end.
INT tmnxBundleMemberImaTxLid	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.7	INTEGER	read-only	tmnxBundleMemberImaTxLid indicates the Link Identifier assigned to the transmit IMA link.
INT tmnxBundleMemberImaRxLid	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.8	INTEGER	read-only	tmnxBundleMemberImaRxLid indicates the Link Identifier used on the receive IMA link.
C32 tmnxBundleMemberImaViolations	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.9	Counter32	read-only	tmnxBundleMemberImaViolations indicates the number of ICP violations including errored, invalid or missing ICP cells.
C32 tmnxBundleMemberImaNeSevErrSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.10	Counter32	read-only	tmnxBundleMemberImaNeSevErrSecs indicates the number of one second intervals in which thirty percent or more of the near-end ICP cells are in violation, or link defects have occurred.
C32 tmnxBundleMemberImaFeSevErrSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.11	Counter32	read-only	tmnxBundleMemberImaFeSevErrSecs indicates the number of one second intervals in which the far-end contains IMA-RDI defects.
C32 tmnxBundleMemberImaNeUnavailSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.12	Counter32	read-only	tmnxBundleMemberImaNeUnavailSecs indicates the number of unavailable seconds at the near-end.
C32 tmnxBundleMemberImaFeUnavailSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.13	Counter32	read-only	tmnxBundleMemberImaFeUnavailSecs indicates the number of unavailable seconds at the near-end.
C32 tmnxBundleMemberImaNeTxUnuseSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.14	Counter32	read-only	tmnxBundleMemberImaNeTxUnuseSecs indicates the number of unavailable seconds at the near-end transmit link state machine.
C32 tmnxBundleMemberImaNeRxUnuseSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.15	Counter32	read-only	tmnxBundleMemberImaNeRxUnuseSecs indicates the number of unavailable seconds at the near-end receive link state machine.
C32 tmnxBundleMemberImaFeTxUnuseSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.16	Counter32	read-only	tmnxBundleMemberImaFeTxUnuseSecs indicates the number of unavailable seconds at the far-end transmit link state machine.
C32 tmnxBundleMemberImaFeRxUnuseSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.17	Counter32	read-only	tmnxBundleMemberImaFeRxUnuseSecs indicates the number of unavailable seconds at the far-end receive link state machine.
C32 tmnxBundleMemberImaNeTxNumFails	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.18	Counter32	read-only	tmnxBundleMemberImaNeTxNumFails indicates the number of times that a near-end transmit alarm is set on the IMA link.
C32 tmnxBundleMemberImaNeRxNumFails	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.19	Counter32	read-only	tmnxBundleMemberImaNeRxNumFails indicates the number of times that a near-end receive alarm is set on the IMA link.
C32 tmnxBundleMemberImaFeTxNumFails	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.20	Counter32	read-only	tmnxBundleMemberImaFeTxNumFails indicates the number of times that a far-end transmit alarm is set on the IMA link.
C32 tmnxBundleMemberImaFeRxNumFails	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.21	Counter32	read-only	tmnxBundleMemberImaFeRxNumFails indicates the number of times that a far-end receive alarm is set on the IMA link.
C32 tmnxBundleMemberImaTxIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.22	Counter32	read-only	tmnxBundleMemberImaTxIcpCells indicates the number of ICP cells that have been transmitted on the IMA link.
C32 tmnxBundleMemberImaRxIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.23	Counter32	read-only	tmnxBundleMemberImaRxIcpCells indicates the number of ICP cells that have been received on the IMA link.
C32 tmnxBundleMemberImaErrorIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.24	Counter32	read-only	tmnxBundleMemberImaErrorIcpCells indicates the number of ICP cells with HEC or CRC-10 errors.
C32 tmnxBundleMemberImaLstRxIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.25	Counter32	read-only	tmnxBundleMemberImaLstRxIcpCells indicates the number of lost ICP cells at the expected offset.
C32 tmnxBundleMemberImaOifAnomalies	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.26	Counter32	read-only	tmnxBundleMemberImaOifAnomalies indicates the number of OIF anomalies at the near-end.
TMN tmnxBundleMemberImaRxTestState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.27	TmnxImaTestState	read-only	tmnxBundleMemberImaRxTestState indicates the current state of the test pattern on this link.
INT tmnxBundleMemberImaRxTestPattern	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.28	INTEGER	read-only	tmnxBundleMemberImaRxTestPattern indicates the received test pattern value on this link.
U32 tmnxBundleMemberImaRelDelay	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.29	Unsigned32	read-only	tmnxBundleMemberImaRelDelay indicates the latest measured delay on this member link relative to the member link with the least delay within the same IMA group
tmnxDS1PortTable	1.3.6.1.4.1.6527.3.1.2.2.4.23		not-accessible	The tmnxDS1PortTable has an entry for a DS1 physical port.
tmnxDS1PortEntry	1.3.6.1.4.1.6527.3.1.2.2.4.23.1		not-accessible	Each row entry represents a physical DS1 port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when the tmnxMDAAssignedType object is set to the DS1 MDA type The tmnxDS1PortEntry contains attributes that are unique to the 'ds1e1' TmnxPortType. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each tmnxDS1PortEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
INT tmnxDS1PortBuildout	1.3.6.1.4.1.6527.3.1.2.2.4.23.1.1	INTEGER	read-create	tmnxDS1PortBuildout configures the cable buildout length. A ds1 port has two settings for the DS1 cable buildout: a 'short' setting, for cable lengths of less than or equal to 655 feet, and a 'long' setting for cable lengths of greater than 655 feet. This object applies to copper-cable-based DS1 ports only.
TIM tmnxDS1PortLastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.23.1.2	TimeStamp	read-only	The tmnxDS1PortLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS1PortEntry row for this port.
INT tmnxDS1PortType	1.3.6.1.4.1.6527.3.1.2.2.4.23.1.3	INTEGER	read-create	tmnxDS1PortType configures the type of the physical port to 'ds1', 'e1' or 'j1'.
INT tmnxDS1PortLineLength	1.3.6.1.4.1.6527.3.1.2.2.4.23.1.4	INTEGER	read-create	tmnxDS1PortLineLength configuration only applies to a ds1 port configured with a 'short' buildout. tmnxDS1PortLineLength configures the length of the line (in feet). For line lengths longer than 655 feet configure the ds1 port buildout as 'long'. For 'long' buildout the following values are valid: lengthNotApplicable - Not applicable For 'short' buildout the following values are valid: length0To133 - For line length from 0 to 133 feet length134To266 - For line length from 134 to 266 feet length267To399 - For line length from 267 to 399 feet length400To533 - For line length from 400 to 533 feet length534To655 - For line length from 534 to 655 feet The default for 'long' buildout is 'lengthNotApplicable' while the default for 'short' buildout is 'length0To133'.
INT tmnxDS1PortLbo	1.3.6.1.4.1.6527.3.1.2.2.4.23.1.5	INTEGER	read-create	tmnxDS1PortLbo configuration only applies to a ds1 port configured with a 'long' buildout. tmnxDS1PortLbo configures the number of decibels(dB) the transmission signal decreases over the line. For 'short' buildout the following values are valid: lboNotApplicable - Not applicable For 'long' buildout the following values are valid: lbo0dB - For 0 dB lboNeg7p5dB - For -7.5 dB lboNeg15p0dB - For -15.0 dB lboNeg22p5dB - For -22.5 dB The default for 'short' build out is 'lboNotApplicable' while the default for 'long' buildout is 'lbo0dB'
I32 tmnxDS1PortDbGain	1.3.6.1.4.1.6527.3.1.2.2.4.23.1.6	Integer32	read-only	tmnxDS1PortDbGain only applies to a ds1 port configured with a 'long' buildout. tmnxDS1PortDbGain shows the number of decibels the received signal is increased to compensate for loss.
tmnxPortSchedOverrideTable	1.3.6.1.4.1.6527.3.1.2.2.4.24		not-accessible	The tmnxPortSchedOverrideTable has an entry for each port scheduler override configured on this system.
tmnxPortSchedOverrideEntry	1.3.6.1.4.1.6527.3.1.2.2.4.24.1		not-accessible	Each row represents a particular port-scheduler override. Entries are created and deleted by the user.
ROW tmnxPortSchedOverrideRowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.1	RowStatus	read-create	The value of tmnxPortSchedOverrideRowStatus is used for the creation and deletion of port-scheduler overrides. When tmnxPortEgrPortSchedPlcy of the tmnxPortEntry indexed by the same indices of this table is an empty string, creation will fail.
STR tmnxPortSchedOverrideSchedName	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.2	DisplayString	read-only	The value of tmnxPortSchedOverrideSchedName indicates the name of the port scheduler policy that this row entry overrides.
TIM tmnxPortSchedOverrideLastChanged	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.3	TimeStamp	read-only	The value of tmnxPortSchedOverrideLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row.
TPO tmnxPortSchedOverrideMaxRate	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.4	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideMaxRate specifies the explicit maximum frame based bandwidth limit. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyMaxRate.
TPO tmnxPortSchedOverrideLvl1PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.5	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl1PIR specifies the total bandwidth limit, PIR, for priority level 1. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl1PIR.
TPO tmnxPortSchedOverrideLvl1CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.6	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl1CIR specifies the within-cir bandwidth limit for priority level 1. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl1CIR.
TPO tmnxPortSchedOverrideLvl2PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.7	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl2PIR specifies the total bandwidth limit, PIR, for priority level 2. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl2PIR.
TPO tmnxPortSchedOverrideLvl2CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.8	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl2CIR specifies the within-cir bandwidth limit for priority level 2. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl2CIR.
TPO tmnxPortSchedOverrideLvl3PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.9	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl3PIR specifies the total bandwidth limit, PIR, for priority level 3. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl3PIR.
TPO tmnxPortSchedOverrideLvl3CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.10	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl3CIR specifies the within-cir bandwidth limit for priority level 3. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl3CIR.
TPO tmnxPortSchedOverrideLvl4PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.11	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl4PIR specifies the total bandwidth limit, PIR, for priority level 4. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl4PIR.
TPO tmnxPortSchedOverrideLvl4CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.12	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl4CIR specifies the within-cir bandwidth limit for priority level 4. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl4CIR.
TPO tmnxPortSchedOverrideLvl5PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.13	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl5PIR specifies the total bandwidth limit, PIR, for priority level 5. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl5PIR.
TPO tmnxPortSchedOverrideLvl5CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.14	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl5CIR specifies the within-cir bandwidth limit for priority level 5. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl5CIR.
TPO tmnxPortSchedOverrideLvl6PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.15	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl6PIR specifies the total bandwidth limit, PIR, for priority level 6. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl6PIR.
TPO tmnxPortSchedOverrideLvl6CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.16	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl6CIR specifies the within-cir bandwidth limit for priority level 6. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl6CIR.
TPO tmnxPortSchedOverrideLvl7PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.17	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl7PIR specifies the total bandwidth limit, PIR, for priority level 7. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl7PIR.
TPO tmnxPortSchedOverrideLvl7CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.18	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl7CIR specifies the within-cir bandwidth limit for priority level 7. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl7CIR.
TPO tmnxPortSchedOverrideLvl8PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.19	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl8PIR specifies the total bandwidth limit, PIR, for priority level 8. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl8PIR.
TPO tmnxPortSchedOverrideLvl8CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.20	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl8CIR specifies the within-cir bandwidth limit for priority level 8. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl8CIR.
BIT tmnxPortSchedOverrideFlags	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.21	Bits	read-create	The value of tmnxPortSchedOverrideFlags specifies the set of attributes whose values have been overridden via management on this port scheduler. Clearing a given flag will return the corresponding overridden attribute to the value defined in the port's port-scheduler policy.
tmnxBPGrpAssocTable	1.3.6.1.4.1.6527.3.1.2.2.4.25		not-accessible	The tmnxBPGrpAssocTable has an entry for each Bundle Protection Group created on the system.
tmnxBPGrpAssocEntry	1.3.6.1.4.1.6527.3.1.2.2.4.25.1		not-accessible	Each row displays the relationship between a Bundle Protection group and its working and protection bundle.
TMN tmnxBPGrpAssocWorkingBundleID	1.3.6.1.4.1.6527.3.1.2.2.4.25.1.1	TmnxBundleID	read-only	tmnxBPGrpAssocWorkingBundleID identifies the working bundle. A value of zero is given if no working bundle is associated with the given tmnxBundleBundleID.
TMN tmnxBPGrpAssocProtectBundleID	1.3.6.1.4.1.6527.3.1.2.2.4.25.1.2	TmnxBundleID	read-only	tmnxBPGrpAssocProtectBundleID identifies the protection bundle. A value of zero is given if no protection bundle is associated with the given tmnxBundleBundleID.
TMN tmnxBPGrpAssocActiveBundleID	1.3.6.1.4.1.6527.3.1.2.2.4.25.1.3	TmnxBundleID	read-only	tmnxBPGrpAssocActiveBundleID identifies the bundle that is considered the active bundle. This bundle contains the members that are part of the active aps port. A value of zero is given if no bundle is considered active.
tmnxBundleMlpppTable	1.3.6.1.4.1.6527.3.1.2.2.4.26		not-accessible	The tmnxBundleMlpppTable contains MLPPP specific data.
tmnxBundleMlpppEntry	1.3.6.1.4.1.6527.3.1.2.2.4.26.1		not-accessible	Each row entry contains data on an MLPPP Bundle.
OCT tmnxBundleMlpppEndpointID	1.3.6.1.4.1.6527.3.1.2.2.4.26.1.1	OCTET STRING	read-create	tmnxBundleMlpppEndpointID indentifies the Endpoint Discriminator identifier value within the specified tmnxBundleMlpppEndpointIDClass. The object tmnxPortAdminStatus must be set to 'outOfService' to change this value.
NUM tmnxBundleMlpppEndpointIDClass	1.3.6.1.4.1.6527.3.1.2.2.4.26.1.2	TmnxMlpppEndpointIdClass	read-create	tmnxBundleMlpppEndpointIDClass specifies the Link Control Protocol Endpoint Descriminator Class field type of the tmnxBundleMlpppEndpointID. The object tmnxPortAdminStatus must be set to 'outOfService' to change this value. Bundle DEFVAL Physical MLPPP Bundle ieee802dot1GlobalMacAddress (3) MLPPP Bundle Protection Group ipAddress (2)
INT tmnxBundleMlpppClassCount	1.3.6.1.4.1.6527.3.1.2.2.4.26.1.3	INTEGER	read-create	The value of tmnxBundleMlpppClassCount specifies whether Multiclass MLPPP is enabled on a bundle with a tmnxBundleType of 'mlppp' and when enabled what is the number of classes to be negotiated/supported over the MLPPP bundle. The value of 0 disables multiclass MLPPP including negotiation in the PPP protocol. All other values specify the number of classes to be supported on a given multiclass bundle and enable Multiclass MLPPP negotiation on that bundle. Non-zero values supported are platform/MDA specific. The value of tmnxBundleMlpppClassCount must be set to 0 and cannot be changed when LFI is enabled on the bundle (see tmnxBundleLFI object in tmnxBundleTable). The value of tmnxBundleMlpppClassCount may be modified only when tmnxBundleNumLinks is zero. To set the value of tmnxBundleMlpppClassCount to a value greater than 4, the long sequence format must be enabled on the bundle (see tmnxBundleShortSequence object in tmnxBundleTable). Changing the value of tmnxBundleMlpppClassCount resets the values of tmnxBundleMlpppIngQoSProfId and tmnxBundleMlpppEgrQoSProfId to their defaults
TML tmnxBundleMlpppIngQoSProfId	1.3.6.1.4.1.6527.3.1.2.2.4.26.1.4	TMlpppQoSProfileId	read-create	tmnxBundleMlpppIngQoSProfId specifies ingress QoS profile to be used for the incoming traffic over this MLPPP bundle. The value of tmnxBundleMlpppIngQoSProfId may be modified only when the value of tmnxBundleNumLinks is 0. The value of tmnxBundleMlpppIngQoSProfId of 0 indicates a default QoS profile is used as applicable to a given H/W and the configured value of tmnxBundleMlpppClassCount.
TML tmnxBundleMlpppEgrQoSProfId	1.3.6.1.4.1.6527.3.1.2.2.4.26.1.5	TMlpppQoSProfileId	read-create	tmnxBundleMlpppEgrQoSProfId specifies egress QoS profile to be used for the outgoing traffic over this MLPPP bundle. The value of tmnxBundleMlpppEgrQoSProfId may be modified only when tmnxBundleNumLinks is zero. The value of tmnxBundleMlpppEgrQoSProfId of 0 indicates a default profile is used as applicable to a given H/W and the configured value of tmnxBundleMlpppClassCount.
tmnxDigitalDiagMonitorTable	1.3.6.1.4.1.6527.3.1.2.2.4.31		not-accessible	The tmnxDigitalDiagMonitorTable has an entry for each SFP/XFP in the system that supports Digital Diagnostic Monitoring (DDM). The table is indexed by TmnxPortID. Each row in this table is dynamically added and removed internally by the system based on the presence or absence of DDM capable SFP/XFP components.
tmnxDigitalDiagMonitorEntry	1.3.6.1.4.1.6527.3.1.2.2.4.31.1		not-accessible	Each row represents a particular SFP/XFP that supports Digital Diagnostic Monitoring. Entries are created and deleted internally by the system.
I32 tmnxDDMTemperature	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.1	Integer32	read-only	The value of tmnxDDMTemperature indicates the current temperature of the SFP/XFP in degrees Celsius.
I32 tmnxDDMTempLowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.2	Integer32	read-only	The value of tmnxDDMTempLowWarning indicates the temperature of the SFP/XFP in degrees Celsius that triggers a low-warning.
I32 tmnxDDMTempLowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.3	Integer32	read-only	The value of tmnxDDMTempLowAlarm indicates the temperature of the SFP/XFP in degrees Celsius that triggers a low-alarm.
I32 tmnxDDMTempHiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.4	Integer32	read-only	The value of tmnxDDMTempHiWarning indicates the temperature of the SFP/XFP in degrees Celsius that triggers a hi-warning.
I32 tmnxDDMTempHiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.5	Integer32	read-only	The value of tmnxDDMTempHiAlarm indicates the temperature of the SFP/XFP in degrees Celsius that triggers a hi-alarm.
I32 tmnxDDMSupplyVoltage	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.6	Integer32	read-only	The value of tmnxDDMSupplyVoltage indicates the current supply voltage of the SFP/XFP in micro-Volts (uV).
I32 tmnxDDMSupplyVoltageLowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.7	Integer32	read-only	The value of tmnxDDMSupplyVoltageLowWarning indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a low-warning.
I32 tmnxDDMSupplyVoltageLowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.8	Integer32	read-only	The value of tmnxDDMSupplyVoltageLowAlarm indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a low-alarm.
I32 tmnxDDMSupplyVoltageHiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.9	Integer32	read-only	The value of tmnxDDMSupplyVoltageHiWarning indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a hi-warning.
I32 tmnxDDMSupplyVoltageHiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.10	Integer32	read-only	The value of tmnxDDMSupplyVoltageHiAlarm indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a hi-alarm.
I32 tmnxDDMTxBiasCurrent	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.11	Integer32	read-only	The value of tmnxDDMTxBiasCurrent indicates the current Transmit Bias Current of the SFP/XFP in micro-Amperes (uA).
I32 tmnxDDMTxBiasCurrentLowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.12	Integer32	read-only	The value of tmnxDDMTxBiasCurrentLowWarning indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a low-warning.
I32 tmnxDDMTxBiasCurrentLowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.13	Integer32	read-only	The value of tmnxDDMTxBiasCurrentLowAlarm indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a low-alarm.
I32 tmnxDDMTxBiasCurrentHiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.14	Integer32	read-only	The value of tmnxDDMTxBiasCurrentHiWarning indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a hi-warning.
I32 tmnxDDMTxBiasCurrentHiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.15	Integer32	read-only	The value of tmnxDDMTxBiasCurrentHiAlarm indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a hi-alarm.
I32 tmnxDDMTxOutputPower	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.16	Integer32	read-only	The value of tmnxDDMTxOutputPower indicates the current Output Power of the SFP/XFP in micro-Watts (uW).
I32 tmnxDDMTxOutputPowerLowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.17	Integer32	read-only	The value of tmnxDDMTxOutputPowerLowWarning indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a low-warning.
I32 tmnxDDMTxOutputPowerLowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.18	Integer32	read-only	The value of tmnxDDMTxOutputPowerLowAlarm indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a low-alarm.
I32 tmnxDDMTxOutputPowerHiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.19	Integer32	read-only	The value of tmnxDDMTxOutputPowerHiWarning indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm.
I32 tmnxDDMTxOutputPowerHiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.20	Integer32	read-only	The value of tmnxDDMTxOutputPowerHiAlarm indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm.
I32 tmnxDDMRxOpticalPower	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.21	Integer32	read-only	The value of tmnxDDMRxOpticalPower indicates the current Received Optical Power of the SFP/XFP in micro-Watts (uW).
I32 tmnxDDMRxOpticalPowerLowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.22	Integer32	read-only	The value of tmnxDDMRxOpticalPowerLowWarning indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a low-warning.
I32 tmnxDDMRxOpticalPowerLowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.23	Integer32	read-only	The value of tmnxDDMRxOpticalPowerLowAlarm indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a low-alarm.
I32 tmnxDDMRxOpticalPowerHiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.24	Integer32	read-only	The value of tmnxDDMRxOpticalPowerHiWarning indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-warning.
I32 tmnxDDMRxOpticalPowerHiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.25	Integer32	read-only	The value of tmnxDDMRxOpticalPowerHiAlarm indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm.
INT tmnxDDMRxOpticalPowerType	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.26	INTEGER	read-only	The value of tmnxDDMRxOpticalPowerType indicates whether the tmnxDDMRxOpticalPower was taken as an average, or as an Optical Modulation Amplitude (OMA).
I32 tmnxDDMAux1	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.27	Integer32	read-only	The value of tmnxDDMAux1 indicates the Manufacturer specific Auxiliary 1 information of the XFP.
I32 tmnxDDMAux1LowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.28	Integer32	read-only	The value of tmnxDDMAux1LowWarning indicates the Manufacturer specific Auxiliary 1 low-warning threshold for the XFP.
I32 tmnxDDMAux1LowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.29	Integer32	read-only	The value of tmnxDDMAux1LowAlarm indicates the Manufacturer specific Auxiliary 1 low-alarm threshold for the XFP.
I32 tmnxDDMAux1HiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.30	Integer32	read-only	The value of tmnxDDMAux1HiWarning indicates the Manufacturer specific Auxiliary 1 hi-warning threshold for the XFP.
I32 tmnxDDMAux1HiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.31	Integer32	read-only	The value of tmnxDDMAux1HiAlarm indicates the Manufacturer specific Auxiliary 1 hi-alarm threshold for the XFP.
INT tmnxDDMAux1Type	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.32	INTEGER	read-only	The value of tmnxDDMAux1Type indicates the measurement type of the Manufacturer specific Auxiliary 1 information of the XFP: none (0) - not specified. adp-bias-voltage (1) - LSB is 10mV. reserved-2 (2) - reserved for future use. tec-current (3) - LSB is 100uA. laser-temp (4) - degrees Celsius(C). laser-wavelength (5) - LSB is 0.05 nm. voltage-50 (6) - 5.0 supply voltage, LSB=100uV. voltage-33 (7) - 3.3 supply voltage, LSB=100uV. voltage-18 (8) - 1.8 supply voltage, LSB=100uV, voltage-52 (9) - -5.2 supply voltage, LSB=100uV. current-50 (10) - 5.0V supply current, LSB=100uA. reserved-11 (11) - reserved for future use. reserved-12 (12) - reserved for future use. current-33 (13) - 3.3V supply current, LSB=100uA. current-18 (14) - 1.8V supply current, LSB=100uA. current-52 (15) - -5.2V supply current, LSB=100uA.
I32 tmnxDDMAux2	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.33	Integer32	read-only	The value of tmnxDDMAux2 indicates the Manufacturer specific Auxiliary 2 information of the SFP/XFP.
I32 tmnxDDMAux2LowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.34	Integer32	read-only	The value of tmnxDDMAux2LowWarning indicates the Manufacturer specific Auxiliary 2 low-warning threshold for the XFP.
I32 tmnxDDMAux2LowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.35	Integer32	read-only	The value of tmnxDDMAux2LowAlarm indicates the Manufacturer specific Auxiliary 2 low-alarm threshold for the XFP.
I32 tmnxDDMAux2HiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.36	Integer32	read-only	The value of tmnxDDMAux2HiWarning indicates the Manufacturer specific Auxiliary 2 hi-warning threshold for the XFP.
I32 tmnxDDMAux2HiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.37	Integer32	read-only	The value of tmnxDDMAux2HiAlarm indicates the Manufacturer specific Auxiliary 2 hi-alarm threshold for the XFP.
INT tmnxDDMAux2Type	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.38	INTEGER	read-only	The value of tmnxDDMAux2Type indicates the measurement type of the Manufacturer specific Auxiliary 2 information of the XFP: none (0) - not specified. adp-bias-voltage (1) - LSB is 10mV. reserved-2 (2) - reserved for future use. tec-current (3) - LSB is 100uA. laser-temp (4) - degrees Celsius(C). laser-wavelength (5) - LSB is 0.05 nm. voltage-50 (6) - 5.0 supply voltage, LSB=100uV. voltage-33 (7) - 3.3 supply voltage, LSB=100uV. voltage-18 (8) - 1.8 supply voltage, LSB=100uV, voltage-52 (9) - -5.2 supply voltage, LSB=100uV. current-50 (10) - 5.0V supply current, LSB=100uA. reserved-11 (11) - reserved for future use. reserved-12 (12) - reserved for future use. current-33 (13) - 3.3V supply current, LSB=100uA. current-18 (14) - 1.8V supply current, LSB=100uA. current-52 (15) - -5.2V supply current, LSB=100uA.
BIT tmnxDDMFailedThresholds	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.39	Bits	read-only	The value of tmnxDDMFailedThresholds indicates which objects of the monitored SFP/XFP is in a failed or cleared threshold state. A set bit indicates that the specified threshold has been exceeded.
T/F tmnxDDMExternallyCalibrated	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.40	TruthValue	read-only	The value of tmnxDDMExternallyCalibrated indicates whether the SFP was externally calibrated (true) or internally calibrated (false).
U32 tmnxDDMExtCalRxPower4	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.41	Unsigned32	read-only	The value of tmnxDDMExtCalRxPower4 indicates the Rx_PWR(4) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalRxPower3	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.42	Unsigned32	read-only	The value of tmnxDDMExtCalRxPower3 indicates the Rx_PWR(3) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8462 Rev 10.2.
U32 tmnxDDMExtCalRxPower2	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.43	Unsigned32	read-only	The value of tmnxDDMExtCalRxPower2 indicates the Rx_PWR(2) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalRxPower1	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.44	Unsigned32	read-only	The value of tmnxDDMExtCalRxPower1 indicates the Rx_PWR(1) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalRxPower0	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.45	Unsigned32	read-only	The value of tmnxDDMExtCalRxPower0 indicates the Rx_PWR(0) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalTxLaserBiasSlope	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.46	Unsigned32	read-only	The value of tmnxDDMExtCalTxLaserBiasSlope indicates the Tx_l(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
I32 tmnxDDMExtCalTxLaserBiasOffset	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.47	Integer32	read-only	The value of tmnxDDMExtCalTxLaserBiasOffset indicates the Tx_l(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalTxPowerSlope	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.48	Unsigned32	read-only	The value of tmnxDDMExtCalTxPowerSlope indicates the Tx_PWR(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
I32 tmnxDDMExtCalTxPowerOffset	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.49	Integer32	read-only	The value of tmnxDDMExtCalTxPowerOffset indicates the Tx_PWR(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalTemperatureSlope	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.50	Unsigned32	read-only	The value of tmnxDDMExtCalTemperatureSlope indicates the T(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
I32 tmnxDDMExtCalTemperatureOffset	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.51	Integer32	read-only	The value of tmnxDDMExtCalTemperatureOffset indicates the T(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalVoltageSlope	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.52	Unsigned32	read-only	The value of tmnxDDMExtCalVoltageSlope indicates the V(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
I32 tmnxDDMExtCalVoltageOffset	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.53	Integer32	read-only	The value of tmnxDDMExtCalVoltageOffset indicates the V(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
tmnxPortNotificationObjects	1.3.6.1.4.1.6527.3.1.2.2.7
TMN tmnxPortNotifyPortId	1.3.6.1.4.1.6527.3.1.2.2.7.1	TmnxPortID	accessible-for-notify	Used by tmnx port Notifications, the OID indicates the port or sonet path associated with the alarm.
INT tmnxPortNotifySonetAlarmReason	1.3.6.1.4.1.6527.3.1.2.2.7.2	INTEGER	accessible-for-notify	Used by tmnx sonet Port Notifications, the value of tmnxPortNotifySonetAlarmReason indicates the reason a sonet port alarm has been raised.
INT tmnxPortNotifySonetPathAlarmReason	1.3.6.1.4.1.6527.3.1.2.2.7.3	INTEGER	accessible-for-notify	Used by tmnx sonet path Notifications, the value of tmnxPortNotifySonetPathAlarmReason indicates the reason a sonet path alarm has been raised.
INT tmnxPortNotifyError	1.3.6.1.4.1.6527.3.1.2.2.7.4	INTEGER	accessible-for-notify	Used by tmnxEqPortError notification, the value of tmnxPortNotifyError indicates the reason a port has an error.
INT tmnxPortNotifyDS3AlarmReason	1.3.6.1.4.1.6527.3.1.2.2.7.5	INTEGER	accessible-for-notify	Used by tmnx DS3 Port Notifications, the value of tmnxPortNotifyDS3AlarmReason indicates the reason a DS3 interface alarm has been raised.
INT tmnxPortNotifyDS1AlarmReason	1.3.6.1.4.1.6527.3.1.2.2.7.6	INTEGER	accessible-for-notify	Used by tmnx DS1 Port Notifications, the value of tmnxPortNotifyDS1AlarmReason indicates the reason a DS1 interface alarm has been raised.
TMN tmnxPortNotifyBundleId	1.3.6.1.4.1.6527.3.1.2.2.7.7	TmnxBundleID	accessible-for-notify	Used by tmnx bundle Notifications, the value indicates the bundle associated with the alarm.
TMN tmnxPortNotifyEtherAlarmReason	1.3.6.1.4.1.6527.3.1.2.2.7.8	TmnxPortEtherReportValue	accessible-for-notify	Used by tmnx ethernet Port Notifications, the value of tmnxPortNotifyEtherAlarmReason indicates the reason a ethernet port alarm has been raised.
INT tmnxDDMFailedObject	1.3.6.1.4.1.6527.3.1.2.2.7.9	INTEGER	accessible-for-notify	Used by Digital Diagnostic Monitoring (DDM) Notifications, the value of tmnxDDMFailedObject indicates which object of the monitored SFP/XFP is in a failed or cleared threshold state.
tmnxFRObjs	1.3.6.1.4.1.6527.3.1.2.2.9
tmnxFRDlcmiTable	1.3.6.1.4.1.6527.3.1.2.2.9.1		not-accessible	The tmnxFRDlcmiTable has an entry for each port in the system that is configured for Frame Relay. It contains the parameters for the Data Link Connection Management Interface (DLCMI) for the frame relay service on this port.
tmnxFRDlcmiEntry	1.3.6.1.4.1.6527.3.1.2.2.9.1.1		not-accessible	The Parameters for a particular Data Link Connection Management Interface. Entries cannot be created and deleted via SNMP SET operations.
INT tmnxFRDlcmiMode	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.1	INTEGER	read-write	tmnxFRDlcmiMode is used to set the mode of the interface. It can be set as Data terminal equipment (dte), Data circuit-terminating equipment (dce) or both as Data terminal equipment and Data circuit-terminating equipment (bidir).
INT tmnxFRDlcmiN392Dce	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.2	INTEGER	read-write	tmnxFRDlcmiN392Dce is used to configure the LMI error threshold for DCE interface.
INT tmnxFRDlcmiN393Dce	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.3	INTEGER	read-write	tmnxFRDlcmiN393Dce is used to configure the LMI monitored event count for DCE interface.
INT tmnxFRDlcmiT392Dce	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.4	INTEGER	read-write	tmnxFRDlcmiT392Dce is used to configure the polling verification timer for the Frame Relay DCE interface.
C32 tmnxFRDlcmiTxStatusEnqMsgs	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.5	Counter32	read-only	tmnxFRDlcmiTxStatusEnqMsgs indicates the number of LMI Status Enquiry messages transmitted on this Frame Relay interface.
C32 tmnxFRDlcmiRxStatusEnqMsgs	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.6	Counter32	read-only	tmnxFRDlcmiRxStatusEnqMsgs indicates the number of LMI Status Enquiry messages received on this Frame Relay interface.
C32 tmnxFRDlcmiStatusEnqMsgTimeouts	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.7	Counter32	read-only	tmnxFRDlcmiStatusEnqMsgTimeouts indicates the number of times the LMI agent did not receive a Status Enquiry message within the allotted time.
C32 tmnxFRDlcmiTxStatusMsgs	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.8	Counter32	read-only	tmnxFRDlcmiTxStatusMsgs indicates the number of LMI Status messages transmitted on this Frame Relay interface.
C32 tmnxFRDlcmiRxStatusMsgs	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.9	Counter32	read-only	tmnxFRDlcmiRxStatusMsgs indicates the number of LMI Status messages received on this Frame Relay interface.
C32 tmnxFRDlcmiStatusMsgTimeouts	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.10	Counter32	read-only	tmnxFRDlcmiStatusMsgTimeouts indicates the number of times the LMI agent did not receive a Status message within the allotted time.
C32 tmnxFRDlcmiDiscardedMsgs	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.11	Counter32	read-only	tmnxFRDlcmiDiscardedMsgs indicates the number of times the LMI agent discarded a received message because it wasn't expecting it, the type of message was incorrect, or the contents of the message were invalid.
C32 tmnxFRDlcmiInvRxSeqNumMsgs	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.12	Counter32	read-only	tmnxFRDlcmiInvRxSeqNumMsgs indicates the number of times the LMI agent received a message with an invalid receive sequence number: i.e. a sequence number that does not match the last transmitted sequence number of the agent.
tmnxQosAppObjs	1.3.6.1.4.1.6527.3.1.2.2.10
tmnxQosPoolAppTable	1.3.6.1.4.1.6527.3.1.2.2.10.2		not-accessible	This table maintains associations of the buffer pools with the individual objects.
tmnxQosPoolAppEntry	1.3.6.1.4.1.6527.3.1.2.2.10.2.1		not-accessible	This entry maintains the specifics about the association of a buffer pool and an object.
INT tmnxObjectType	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.1	INTEGER	not-accessible	The object tmnxObjectType defines the type of object to which the pool is being setup for.
TMN tmnxObjectId	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.2	TmnxPortID	not-accessible	tmnxObjectId is used to identify the specific object. If tmnxObjectType is 'mda', then the tmnxObjectId is encoded as a physical port with the port being '0'. For all other types the encoding is done as per the description of TmnxPortID.
INT tmnxObjectAppType	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.3	INTEGER	not-accessible	The object tmnxObjectAppType specifies the nature of usage the pool would be used for. The pools could be used for access or network traffic at either ingress or egress.
TNA tmnxObjectAppPool	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.4	TNamedItem	not-accessible	tmnxObjectAppPool specifies the name of the pool to be used/created.
ROW tmnxObjectAppPoolRowStatus	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.5	RowStatus	read-create	The object tmnxObjectAppPoolRowStatus is used to create or remove a pool application to the object.
I32 tmnxObjectAppResvCbs	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.6	Integer32	read-create	The percentage of pool size reserved for CBS. The value '-1' implies that the reserved CBS should be computed as the sum of the CBS requested by the entities using this pool if the application point is 'network'. For 'access' application points the value '-1' means a default of 30%.
TNA tmnxObjectAppSlopePolicy	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.7	TNamedItem	read-create	tmnxObjectAppSlopePolicy specifies the slope policy being used for this pool. The Slope policies define the nature of the RED Slopes for the high and the low priority traffic.
I32 tmnxObjectAppPoolSize	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.8	Integer32	read-create	Size in percentage of buffer space. The value '-1' implies that the pool size should be computed as per fair weighing between all other pools.
tmnxATMObjs	1.3.6.1.4.1.6527.3.1.2.2.11
tmnxATMIntfTable	1.3.6.1.4.1.6527.3.1.2.2.11.1		not-accessible	The tmnxATMIntfTable has an entry for each port/channel in the system that is configured for ATM. It contains ATM cell layer configuration parameters.
tmnxATMIntfEntry	1.3.6.1.4.1.6527.3.1.2.2.11.1.1		not-accessible	The Parameters for a particular ATM Cell Management Interface. Entries cannot be created or deleted via SNMP SET operations. Entries will exist in this table when ATM encapsulation is configured on the port/channel.
INT tmnxATMIntfCellFormat	1.3.6.1.4.1.6527.3.1.2.2.11.1.1.1	INTEGER	read-write	tmnxATMIntfCellFormat is used to set the cell format (UNI or NNI) that is to be used on the ATM interface.
I32 tmnxATMIntfMinVpValue	1.3.6.1.4.1.6527.3.1.2.2.11.1.1.2	Integer32	read-write	tmnxATMIntfMinVpValue is used to set the minimum allowable VPI value that can be used on the ATM interface for a VPC.
INT tmnxATMIntfMapping	1.3.6.1.4.1.6527.3.1.2.2.11.1.1.3	INTEGER	read-write	The value of tmnxATMIntfMapping specifies the cell mapping that is to be used on this ATM interface. When tmnxPortChanType does not have a value of 'pdhDs3 (14)', 'inconsistentValue' error will be returned to SNMP SET requests. When tmnxPortChanType has a value of 'pdhDs3 (14)', tmnxATMIntfMapping can be set to 'plcp (2)'.
tmnxPortStatsObjs	1.3.6.1.4.1.6527.3.1.2.2.12
tmnxPortNetIngressStatsTable	1.3.6.1.4.1.6527.3.1.2.2.12.1		not-accessible	Defines the Alcatel 7x50 SR series network port ingress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical queues being used for the ports to forward the network ingress traffic.
tmnxPortNetIngressStatsEntry	1.3.6.1.4.1.6527.3.1.2.2.12.1.1		not-accessible	Defines an entry in tmnxPortNetIngressStatsTable. Entries are created and deleted by the system depending on the queue policy being used at the specific port.
TQU tmnxPortNetIngressQueueIndex	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.1	TQueueId	not-accessible	tmnxPortNetIngressQueueIndex serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a network ingress queue for the specified port in the managed system.
C64 tmnxPortNetIngressFwdInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.2	Counter64	read-only	tmnxPortNetIngressFwdInProfPkts indicates the number of conforming network ingress packets forwarded on this port using this queue.
C64 tmnxPortNetIngressFwdOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.3	Counter64	read-only	tmnxPortNetIngressFwdOutProfPkts indicates the number of exceeding network ingress packets forwarded on this port using this queue.
C64 tmnxPortNetIngressFwdInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.4	Counter64	read-only	tmnxPortNetIngressFwdInProfOcts indicates the number of conforming network ingress octets forwarded on this port using this queue.
C64 tmnxPortNetIngressFwdOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.5	Counter64	read-only	tmnxPortNetIngressFwdOutProfOcts indicates the number of exceeding network ingress octets forwarded on this port using this queue.
C64 tmnxPortNetIngressDroInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.6	Counter64	read-only	tmnxPortNetIngressDroInProfPkts indicates the number of conforming network ingress packets dropped on this port using this queue.
C64 tmnxPortNetIngressDroOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.7	Counter64	read-only	tmnxPortNetIngressDroOutProfPkts indicates the number of exceeding network ingress packets dropped on this port using this queue.
C64 tmnxPortNetIngressDroInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.8	Counter64	read-only	tmnxPortNetIngressDroInProfOcts indicates the number of conforming network ingress octets dropped on this port using this queue.
C64 tmnxPortNetIngressDroOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.9	Counter64	read-only	tmnxPortNetIngressDroOutProfOcts indicates the number of exceeding network ingress octets dropped on this port using this queue.
tmnxPortNetEgressStatsTable	1.3.6.1.4.1.6527.3.1.2.2.12.2		not-accessible	Defines the Alcatel 7x50 SR series network port egress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical queues being used for the ports to forward the network egress traffic.
tmnxPortNetEgressStatsEntry	1.3.6.1.4.1.6527.3.1.2.2.12.2.1		not-accessible	Defines an entry in tmnxPortNetEgressStatsTable. Entries are created and deleted by the system depending on the queue policy being used at the specific port.
TQU tmnxPortNetEgressQueueIndex	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.1	TQueueId	not-accessible	tmnxPortNetEgressQueueIndex serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a network egress queue for the specified port in the managed system.
C64 tmnxPortNetEgressFwdInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.2	Counter64	read-only	tmnxPortNetEgressFwdInProfPkts indicates the number of conforming network egress packets forwarded on this port using this queue.
C64 tmnxPortNetEgressFwdOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.3	Counter64	read-only	tmnxPortNetEgressFwdOutProfPkts indicates the number of exceeding network egress packets forwarded on this port using this queue.
C64 tmnxPortNetEgressFwdInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.4	Counter64	read-only	tmnxPortNetEgressFwdInProfOcts indicates the number of conforming network egress octets forwarded on this port using this queue.
C64 tmnxPortNetEgressFwdOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.5	Counter64	read-only	tmnxPortNetEgressFwdOutProfOcts indicates the number of exceeding network egress octets forwarded on this port using this queue.
C64 tmnxPortNetEgressDroInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.6	Counter64	read-only	tmnxPortNetEgressDroInProfPkts indicates the number of conforming network egress packets dropped on this port using this queue.
C64 tmnxPortNetEgressDroOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.7	Counter64	read-only	tmnxPortNetEgressDroOutProfPkts indicates the number of exceeding network egress packets dropped on this port using this queue.
C64 tmnxPortNetEgressDroInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.8	Counter64	read-only	tmnxPortNetEgressDroInProfOcts indicates the number of conforming network egress octets dropped on this port using this queue.
C64 tmnxPortNetEgressDroOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.9	Counter64	read-only	tmnxPortNetEgressDroOutProfOcts indicates the number of exceeding network egress octets dropped on this port using this queue.
tmnxCiscoHDLCStatsTable	1.3.6.1.4.1.6527.3.1.2.2.12.3		not-accessible	The tmnxCiscoHDLCStatsTable has an entry for each port in the system that is configured for Cisco HDLC encapsulation. It contains Cisco HDLC protocol statistics for the particular port.
tmnxCiscoHDLCStatsEntry	1.3.6.1.4.1.6527.3.1.2.2.12.3.1		not-accessible	An entry in the tmnxCiscoHDLCStatsTable.
U32 tmnxCiscoHDLCDiscardStatInPkts	1.3.6.1.4.1.6527.3.1.2.2.12.3.1.1	Unsigned32	read-only	tmnxCiscoHDLCDiscardStatInPkts indicates the number of inbound Cisco HDLC packets discarded.
U32 tmnxCiscoHDLCDiscardStatOutPkts	1.3.6.1.4.1.6527.3.1.2.2.12.3.1.2	Unsigned32	read-only	tmnxCiscoHDLCDiscardStatOutPkts indicates the number of outbound Cisco HDLC packets discarded.
U32 tmnxCiscoHDLCStatInPkts	1.3.6.1.4.1.6527.3.1.2.2.12.3.1.3	Unsigned32	read-only	tmnxCiscoHDLCStatInPkts indicates the number of inbound Cisco HDLC packets.
U32 tmnxCiscoHDLCStatOutPkts	1.3.6.1.4.1.6527.3.1.2.2.12.3.1.4	Unsigned32	read-only	tmnxCiscoHDLCStatOutPkts indicates the number of outbound Cisco HDLC packets.
U32 tmnxCiscoHDLCStatInOctets	1.3.6.1.4.1.6527.3.1.2.2.12.3.1.5	Unsigned32	read-only	tmnxCiscoHDLCStatInOctets indicates the number of inbound Cisco HDLC octets.
U32 tmnxCiscoHDLCStatOutOctets	1.3.6.1.4.1.6527.3.1.2.2.12.3.1.6	Unsigned32	read-only	tmnxCiscoHDLCStatOutOctets indicates the number of outbound Cisco HDLC octets.
tmnxMcMlpppStatsTable	1.3.6.1.4.1.6527.3.1.2.2.12.4		not-accessible	Defines the Alcatel 7x50 SR series Multiclass MLPPP statistics table for providing the capability of retrieving the traffic statistics for the physical queues being used for a class of a multiclass MLPPP bundle to forward the traffic.
tmnxMcMlpppStatsEntry	1.3.6.1.4.1.6527.3.1.2.2.12.4.1		not-accessible	Defines an entry in tmnxMcMlpppStatsTable. Entries are created and deleted by the system depending on the number of classes being used by a given MLPPP bundle.
TMN tmnxMcMlpppClassIndex	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.1	TmnxMcMlpppClassIndex	not-accessible	tmnxMcMlpppClassIndex serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxBundleBundleID, it uniquely identifies a class of a multiclass MLPPP bundle in the managed system.
C32 tmnxMcMlpppStatsIngressOct	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.2	Counter32	read-only	The value of tmnxMcMlpppStatsIngressOct indicates the total number of octets in all packets received on the bundle for the given class on ingress before reassembly.
C32 tmnxMcMlpppStatsIngressPkt	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.3	Counter32	read-only	The value of tmnxMcMlpppStatsIngressPkt indicates the total number of packets forwarded on the bundle for the given class on ingress towards higher layer protocols.
C32 tmnxMcMlpppStatsIngressErrPkt	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.4	Counter32	read-only	The value of tmnxMcMlpppStatsIngressErrPkt indicates the total number of packets discarded due to reassembly errors on the bundle for the given class on ingress.
C32 tmnxMcMlpppStatsEgressOct	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.5	Counter32	read-only	The value of tmnxMcMlpppStatsEgressOct indicates the total number of octets in all packets received on the bundle for the given class on egress before segmentation.
C32 tmnxMcMlpppStatsEgressPkt	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.6	Counter32	read-only	The value of tmnxMcMlpppStatsEgressPkt indicates the total number of packets forwarded on the bundle for the given class on egress towards the line.
C32 tmnxMcMlpppStatsEgressErrPkt	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.7	Counter32	read-only	The value of tmnxMcMlpppStatsEgressErrPkt indicates the total number of packets discarded due to segmentation errors on the bundle for the given class on egress.
tmnxPortNotifyPrefix	1.3.6.1.4.1.6527.3.1.3.2.2
tmnxPortNotification	1.3.6.1.4.1.6527.3.1.3.2.2.0
NTF tmnxEqOobPortFailure	1.3.6.1.4.1.6527.3.1.3.2.2.0.1			Generated when the out-of-band Ethernet port has failed. On the Alcatel 7x50 SR system, the out-of-band port is the CPM management interface. This notification was made obsolete in the 2.1 release. The Out-of-band, OOB, port is what id refered to as the management port or cpm port. It has an entry in ifTable and linkup, linkDown and tmnxEqPortError notifications are sent for the management port just as for any other port in the system.
NTF tmnxEqPortFailure	1.3.6.1.4.1.6527.3.1.3.2.2.0.2			Generated when a port has failed. This notification was made obsolete in the 2.1 release. tmnxEqPortError is used instead of tmnxEqPortFailure. Standard IETF linkDown notification is sent when a physical port failure is detected. tmnxEqPortError is sent with a ASCII reason message when port errors are detected. It was originally intended that tmnxEqPortError be used to report errors that do not cause port state change to 'down'. tmnxEqPortFailure was intended to report errors that do cause the port state change to 'down'. However, in the implementation tmnxEqPortError is used for both fatal and non-fatal errors.
NTF tmnxQosServiceDegraded	1.3.6.1.4.1.6527.3.1.3.2.2.0.3			Generated when the port is unable to provided the specified quality of service level.
NTF tmnxEqPortSonetAlarm	1.3.6.1.4.1.6527.3.1.3.2.2.0.4			Generated when a SONET/SDH port alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxSonetReportAlarm.
NTF tmnxEqPortSonetAlarmClear	1.3.6.1.4.1.6527.3.1.3.2.2.0.5			Generated when a SONET/SDH port alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxSonetReportAlarm.
NTF tmnxEqPortSonetPathAlarm	1.3.6.1.4.1.6527.3.1.3.2.2.0.6			Generated when a SONET/SDH path alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxSonetPathReportAlarm.
NTF tmnxEqPortSonetPathAlarmClear	1.3.6.1.4.1.6527.3.1.3.2.2.0.7			Generated when a SONET/SDH path alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxSonetPathReportAlarm.
NTF tmnxEqPortSFPInserted	1.3.6.1.4.1.6527.3.1.3.2.2.0.8			Generated when a SFP is inserted in the port.
NTF tmnxEqPortSFPRemoved	1.3.6.1.4.1.6527.3.1.3.2.2.0.9			Generated when a SFP is removed from the port.
NTF tmnxEqPortWrongSFP	1.3.6.1.4.1.6527.3.1.3.2.2.0.10			Generated when a wrong type of SFP optics module is plugged into a 1 Gig MDA, SONET MDA, or 100FX MDA. Because of the large variety of SFPs now supported and their different encoding schemes for compliance bits, the check for wrong SFP has been removed. As a result, tmnxEqPortWrongSFP notification is no longer generated. However, wrong SFP can be inferred from port statistics.
NTF tmnxEqPortSFPCorrupted	1.3.6.1.4.1.6527.3.1.3.2.2.0.11			Generated when SFP information stored in the EPROM on the SFP is corrupt. This notification was made obsolete for revision 6.0 on Alcatel 7x50 SR series systems; it was replaced by tmnxEqPortSFPStatusFailure.
NTF tmnxPortNotifyBerSdTca	1.3.6.1.4.1.6527.3.1.3.2.2.0.12			Generated when a SONET/SDH port's signal degradation bit error rate is greater than the configured error rate threshold. This notification was made obsolete in the 2.1 release.
NTF tmnxPortNotifyBerSfTca	1.3.6.1.4.1.6527.3.1.3.2.2.0.13			Generated when a SONET/SDH port's signal failure bit error rate is greater than the configured error rate threshold. This notification was made obsolete in the 2.1 release.
NTF tmnxEqPortError	1.3.6.1.4.1.6527.3.1.3.2.2.0.14			Generated when an error listed in tmnxPortNotifyError is detected on the port.
NTF tmnxEqPortDS3Alarm	1.3.6.1.4.1.6527.3.1.3.2.2.0.15			Generated when a DS3 interface alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxDS3ChannelReportAlarm.
NTF tmnxEqPortDS3AlarmClear	1.3.6.1.4.1.6527.3.1.3.2.2.0.16			Generated when a DS3 interface alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxDS3ChannelReportAlarm.
NTF tmnxEqPortDS1Alarm	1.3.6.1.4.1.6527.3.1.3.2.2.0.17			Generated when a DS1 interface alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxDS1ReportAlarm.
NTF tmnxEqPortDS1AlarmClear	1.3.6.1.4.1.6527.3.1.3.2.2.0.18			Generated when a DS1 interface alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxDS1ReportAlarm.
NTF tmnxEqPortBndlYellowDiffExceeded	1.3.6.1.4.1.6527.3.1.3.2.2.0.19			Generated when the differential delay of a port in the bundle exceeds the configured value in tmnxBundleYellowDiffDelay.
NTF tmnxEqPortBndlRedDiffExceeded	1.3.6.1.4.1.6527.3.1.3.2.2.0.20			Generated when the differential delay of a port in the bundle exceeds the configured value in tmnxBundleRedDiffDelay.
NTF tmnxEqPortBndlBadEndPtDiscr	1.3.6.1.4.1.6527.3.1.3.2.2.0.21			Generated when the port detected mismatched peer endpoint discriminator for the bundle.
NTF tmnxEqPortEtherAlarm	1.3.6.1.4.1.6527.3.1.3.2.2.0.22			tmnxEqPortEtherAlarm is generated when a ethernet port alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxPortEtherReportAlarm.
NTF tmnxEqPortEtherAlarmClear	1.3.6.1.4.1.6527.3.1.3.2.2.0.23			tmnxEqPortEtherAlarmClear is generated when a ethernet port alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxPortEtherReportAlarm.
NTF tmnxDS1E1LoopbackStarted	1.3.6.1.4.1.6527.3.1.3.2.2.0.24			The tmnxDS1E1LoopbackStarted notification is generated when a loopback is provisioned on a DS1/E1 port.
NTF tmnxDS1E1LoopbackStopped	1.3.6.1.4.1.6527.3.1.3.2.2.0.25			The tmnxDS1E1LoopbackStopped notification is generated when a loopback is removed on a DS1/E1 port. The value of tmnxSonetLoopback specifies the type of loopback that was configured and has now been removed.
NTF tmnxDS3E3LoopbackStarted	1.3.6.1.4.1.6527.3.1.3.2.2.0.26			The tmnxDS3E3LoopbackStarted notification is generated when a loopback is provisioned on a DS3/E3 port.
NTF tmnxDS3E3LoopbackStopped	1.3.6.1.4.1.6527.3.1.3.2.2.0.27			The tmnxDS3E3LoopbackStopped notification is generated when a loopback is removed on a DS3/E3 port. The value of tmnxDS3ChannelLoopback specifies the type of loopback that was configured and has now been removed.
NTF tmnxSonetSDHLoopbackStarted	1.3.6.1.4.1.6527.3.1.3.2.2.0.28			The tmnxSonetSDHLoopbackStarted notification is generated when a loopback is provisioned on a Sonet-SDH port.
NTF tmnxSonetSDHLoopbackStopped	1.3.6.1.4.1.6527.3.1.3.2.2.0.29			The tmnxSonetSDHLoopbackStopped notification is generated when a loopback test is removed on a Sonet-SDH port. The value of tmnxDS1Loopback specifies the type of loopback that was configured and has now been removed.
NTF tmnxEqPortEtherLoopDetected	1.3.6.1.4.1.6527.3.1.3.2.2.0.30			The tmnxEqPortEtherLoopDetected notification is genereated when down-when-looped detects an Ethernet port is receiving PDUs that it transmitted and tmnxPortEtherDownWhenLoopedEnabled is set to 'true'.
NTF tmnxEqPortEtherLoopCleared	1.3.6.1.4.1.6527.3.1.3.2.2.0.31			The tmnxEqPortEtherLoopCleared notification is generated when down-when-looped detects an Ethernet port has stopped receiving PDUs that it transmitted and tmnxPortEtherDownWhenLoopedEnabled is set to 'true'. Setting tmnxPortEtherDownWhenLoopedEnabled to 'false' will also cause this notification to be generated if tmnxEqPortEtherLoopDetected had previously been raised.
NTF tmnxEqPortSpeedCfgNotCompatible	1.3.6.1.4.1.6527.3.1.3.2.2.0.32			Generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured speed on an MDA port is not compatible with the inserted MDA.
NTF tmnxEqPortDuplexCfgNotCompatible	1.3.6.1.4.1.6527.3.1.3.2.2.0.33			Generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured duplex on an MDA port is not compatible with the inserted MDA.
NTF tmnxEqPortIngressRateCfgNotCompatible	1.3.6.1.4.1.6527.3.1.3.2.2.0.34			Generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured ingress rate on an MDA port is not compatible with the inserted MDA.
NTF tmnxEqDigitalDiagMonitorFailure	1.3.6.1.4.1.6527.3.1.3.2.2.0.35			Generated when an SFP/XFP that supports Digital Diagnostic Monitoring (DDM) enters a failed state.
NTF tmnxEqPortSFPStatusFailure	1.3.6.1.4.1.6527.3.1.3.2.2.0.36			Generated when the tmnxPortSFPStatus of an SFP/XFP results in a value other than 'not-equipped (0)', or 'operational (1)'. tmnxEqPortSFPStatusFailure obsoleted tmnxEqPortSFPCorrupted for revision 6.0 on Alcatel 7x50 SR series systems.

Bits (10)
BIT tmnxDDMFailedThresholds	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.39	Bits	read-only	The value of tmnxDDMFailedThresholds indicates which objects of the monitored SFP/XFP is in a failed or cleared threshold state. A set bit indicates that the specified threshold has been exceeded.
BIT tmnxDS3ChannelMDLMessageType	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.20	Bits	read-create	tmnxDS3ChannelMDLMessageType configures the type of MDL message that is transmitted over the DS3 interface. If the value of this object is set to 'none', MDL messages are not transmitted. ds3Path(0) - Enables transmission of the MDL path message. An MDL path message, as defined by ANSI T1.107, is distinguished from idle and test signal messages in that it contains a facility identification code as its final data element. idleSignal(1) - Enables transmission of the MDL idle signal message. An MDL idle signal message, as defined by ANSI T1.107, is distinguished from path and test signal messages in that it contains a port number as its final data element. testSignal(2) - Enables transmission of the MDL test signal message. An MDL test signal message, as defined by ANSI T1.107, is distinguished from path and idle signal messages in that it contains a generator number as its final data element.
BIT tmnxPortEtherReasonDownFlags	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.26	Bits	read-only	The tmnxPortEtherReasonDownFlags indicates why an ethernet port may be in the operationally 'down' state. The following reasons are detected through this object: unknown(0) - Unspecified (or unknown) linklossFwd(1) - A sap using this port has the object 'sapEthernetLLFOperStatus' set to 'fault'
BIT tmnxPortSchedOverrideFlags	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.21	Bits	read-create	The value of tmnxPortSchedOverrideFlags specifies the set of attributes whose values have been overridden via management on this port scheduler. Clearing a given flag will return the corresponding overridden attribute to the value defined in the port's port-scheduler policy.
BIT tmnxPortTransceiverCode	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.26	Bits	read-only	The code for the transmission media. tmnxPortOpticalCompliance is used instead of tmnxPortTransceiverCode.tmnxPortOpticalCompliance contains the same information and is defined by an industry standard.
BIT tmnxPortUpProtocols	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.16	Bits	read-only	The tmnxPortUpProtocols variable is a bitmap that indicates what protocols can be used on this port type.
BIT tmnxSonetPathReportAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.10	Bits	read-create	The value of tmnxSonetPathReportAlarm determines when and if to generate tmnxEqPortSonetPathAlarm and tmnxEqPortSonetPathAlarmClear notifications for this port: pais(1) Reports path alarm indication signal errors. Not set by default. plop(2) Reports path loss of pointer (per tributary) errors. Set by default. prdi(3) Reports path remote defect indication errors. Not set by default. pb3err(4) Reports path B3 errors. Not set by default. pplm(5) Reports a path payload mismatch. As a result the path will be operationally downed. Set by default. prei(6) Reports a path error condition raised by the remote as a result of B3 errors received from this node. Not set by default. puneq(7) Reports unequipped path errors. Set by default. plcd(8) Reports path loss of codegroup delineation error. It is applicable only when the value of tmnxPortEtherXGigMode is set to 'wan'. Not set by default.
BIT tmnxSonetPathReportAlarmStatus	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.13	Bits	read-only	The bits in this object are used for indicating the alarms. The bits are explained as follows: pais(1) Indicates path alarm indication signal errors. plop(2) Indicates path loss of pointer (per tributary) errors. prdi(3) Indicates path remote defect indication errors. pb3err(4) Indicates path B3 errors. pplm(5) Indicates a path payload mismatch. prei(6) Indicates a path error condition raised by the remote as a result of B3 errors received from this node. puneq(7) Indicates a far-end unequipped error. plcd(8) Indicates a path loss of codegroup delineation error. It is applicable only when the value of tmnxPortEtherXGigMode is set to 'wan'. Not set by default.
BIT tmnxSonetReportAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.4	Bits	read-write	The value of tmnxSonetReportAlarm determines when and if to generate tmnxEqPortSonetAlarm and tmnxEqPortSonetAlarmClear notifications for this port: loc(1) Reports a loss of clock which causes the operational state of the port to be downed. Set by default. lais(2) Reports line alarm indication signal errors. Not set by default. lrdi(3) Reports line remote defect initiation errors. LRDIs are caused by remote LOF, LOC, and LOS. Set by default. ss1f(4) Reports section synchronization failure as reported by the S1 byte. Not set by default. sb1err(5) Reports section B1 errors. Not set by default. lb2erSd(6) Reports line signal degradation BER errors. Not set by default. lb2erSf(7) Reports line signal failure BER errors. Set by default. slof(8) Reports section loss of frame errors. Set by default slos(9) Reports section loss of signal errors. Set by default. stxptr(10) Reports a section synchronization error on the transmit side. Indicates if there is a positive or negative justification count per channel. Not set by default. srxptr(11) Reports a section synchronization error on the receive side. Indicates if there is a positive or negative justification count per path. Not set by default. lrei(12) Reports a line error condition raised by the remote as a result of B1 errors received from this node. Not set by default.
BIT tmnxSonetReportAlarmStatus	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.17	Bits	read-only	The bits in this object are used for indicating the alarms. The bits are explained as follows: loc(1) Indicates a loss of clock which causes the operational state of the port to be downed. lais(2) Indicates line alarm indication signal errors. lrdi(3) Indicates line remote defect indication errors. LRDIs are caused by remote LOF, LOC, and LOS. ss1f(4) Indicates section synchronization failure as reported by the S1 byte. sb1err(5) Indicates section B1 errors. lb2erSd(6) Indicates line signal degradation BER errors. lb2erSf(7) Indicates line signal failure BER errors. slof(8) Indicates section loss of frame errors. slos(9) Indicates section loss of signal errors. stxptr(10) Indicates a section synchronization error on the transmit side. Indicates if there is a positive or negative justification count per channel. srxptr(11) Indicates a section synchronization error on the receive side. Indicates if there is a positive or negative justification count per sonet path. lrei(12) Indicates a line error condition raised by the remote as a result of B1 errors received from this node.
Counter32 (43)
C32 tmnxBundleImaGrpErrorIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.19	Counter32	read-only	tmnxBundleImaGrpErrorIcpCells specifies number of ICP cells with HEC or CRC-10 errors.
C32 tmnxBundleImaGrpFeFails	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.16	Counter32	read-only	tmnxBundleImaGrpFeFails specifies the number of reported IMA Group far-end failures since boot time.
C32 tmnxBundleImaGrpLostRxIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.20	Counter32	read-only	tmnxBundleImaGrpLostRxIcpCells specifies the number of missing ICP cells at the expected offset.
C32 tmnxBundleImaGrpNeFails	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.15	Counter32	read-only	tmnxBundleImaGrpNeFails specifies the number of reported IMA Group failures since boot time.
C32 tmnxBundleImaGrpRxIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.18	Counter32	read-only	tmnxBundleImaGrpRxIcpCells specifies number of received ICP cells for this IMA Group.
C32 tmnxBundleImaGrpSmDownSecs	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.11	Counter32	read-only	tmnxBundleImaGrpSmDownSecs specifies the number of seconds that the IMA Group State Machine is not Operational.
C32 tmnxBundleImaGrpSmOperSecs	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.12	Counter32	read-only	tmnxBundleImaGrpSmOperSecs specifies the number of seconds that the IMA Group State Machine has been in the Operational State.
C32 tmnxBundleImaGrpTxIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.17	Counter32	read-only	tmnxBundleImaGrpTxIcpCells specifies number of transmitted ICP cells for this IMA Group.
C32 tmnxBundleInputDiscards	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.18	Counter32	read-only	tmnxBundleInputDiscards indicates the number of LCP packets that were discarded. This object is only supported for a tmnxBundleType value of mlppp.
C32 tmnxBundleMemberImaErrorIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.24	Counter32	read-only	tmnxBundleMemberImaErrorIcpCells indicates the number of ICP cells with HEC or CRC-10 errors.
C32 tmnxBundleMemberImaFeRxNumFails	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.21	Counter32	read-only	tmnxBundleMemberImaFeRxNumFails indicates the number of times that a far-end receive alarm is set on the IMA link.
C32 tmnxBundleMemberImaFeRxUnuseSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.17	Counter32	read-only	tmnxBundleMemberImaFeRxUnuseSecs indicates the number of unavailable seconds at the far-end receive link state machine.
C32 tmnxBundleMemberImaFeSevErrSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.11	Counter32	read-only	tmnxBundleMemberImaFeSevErrSecs indicates the number of one second intervals in which the far-end contains IMA-RDI defects.
C32 tmnxBundleMemberImaFeTxNumFails	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.20	Counter32	read-only	tmnxBundleMemberImaFeTxNumFails indicates the number of times that a far-end transmit alarm is set on the IMA link.
C32 tmnxBundleMemberImaFeTxUnuseSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.16	Counter32	read-only	tmnxBundleMemberImaFeTxUnuseSecs indicates the number of unavailable seconds at the far-end transmit link state machine.
C32 tmnxBundleMemberImaFeUnavailSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.13	Counter32	read-only	tmnxBundleMemberImaFeUnavailSecs indicates the number of unavailable seconds at the near-end.
C32 tmnxBundleMemberImaLstRxIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.25	Counter32	read-only	tmnxBundleMemberImaLstRxIcpCells indicates the number of lost ICP cells at the expected offset.
C32 tmnxBundleMemberImaNeRxNumFails	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.19	Counter32	read-only	tmnxBundleMemberImaNeRxNumFails indicates the number of times that a near-end receive alarm is set on the IMA link.
C32 tmnxBundleMemberImaNeRxUnuseSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.15	Counter32	read-only	tmnxBundleMemberImaNeRxUnuseSecs indicates the number of unavailable seconds at the near-end receive link state machine.
C32 tmnxBundleMemberImaNeSevErrSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.10	Counter32	read-only	tmnxBundleMemberImaNeSevErrSecs indicates the number of one second intervals in which thirty percent or more of the near-end ICP cells are in violation, or link defects have occurred.
C32 tmnxBundleMemberImaNeTxNumFails	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.18	Counter32	read-only	tmnxBundleMemberImaNeTxNumFails indicates the number of times that a near-end transmit alarm is set on the IMA link.
C32 tmnxBundleMemberImaNeTxUnuseSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.14	Counter32	read-only	tmnxBundleMemberImaNeTxUnuseSecs indicates the number of unavailable seconds at the near-end transmit link state machine.
C32 tmnxBundleMemberImaNeUnavailSecs	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.12	Counter32	read-only	tmnxBundleMemberImaNeUnavailSecs indicates the number of unavailable seconds at the near-end.
C32 tmnxBundleMemberImaOifAnomalies	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.26	Counter32	read-only	tmnxBundleMemberImaOifAnomalies indicates the number of OIF anomalies at the near-end.
C32 tmnxBundleMemberImaRxIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.23	Counter32	read-only	tmnxBundleMemberImaRxIcpCells indicates the number of ICP cells that have been received on the IMA link.
C32 tmnxBundleMemberImaTxIcpCells	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.22	Counter32	read-only	tmnxBundleMemberImaTxIcpCells indicates the number of ICP cells that have been transmitted on the IMA link.
C32 tmnxBundleMemberImaViolations	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.9	Counter32	read-only	tmnxBundleMemberImaViolations indicates the number of ICP violations including errored, invalid or missing ICP cells.
C32 tmnxFRDlcmiDiscardedMsgs	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.11	Counter32	read-only	tmnxFRDlcmiDiscardedMsgs indicates the number of times the LMI agent discarded a received message because it wasn't expecting it, the type of message was incorrect, or the contents of the message were invalid.
C32 tmnxFRDlcmiInvRxSeqNumMsgs	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.12	Counter32	read-only	tmnxFRDlcmiInvRxSeqNumMsgs indicates the number of times the LMI agent received a message with an invalid receive sequence number: i.e. a sequence number that does not match the last transmitted sequence number of the agent.
C32 tmnxFRDlcmiRxStatusEnqMsgs	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.6	Counter32	read-only	tmnxFRDlcmiRxStatusEnqMsgs indicates the number of LMI Status Enquiry messages received on this Frame Relay interface.
C32 tmnxFRDlcmiRxStatusMsgs	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.9	Counter32	read-only	tmnxFRDlcmiRxStatusMsgs indicates the number of LMI Status messages received on this Frame Relay interface.
C32 tmnxFRDlcmiStatusEnqMsgTimeouts	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.7	Counter32	read-only	tmnxFRDlcmiStatusEnqMsgTimeouts indicates the number of times the LMI agent did not receive a Status Enquiry message within the allotted time.
C32 tmnxFRDlcmiStatusMsgTimeouts	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.10	Counter32	read-only	tmnxFRDlcmiStatusMsgTimeouts indicates the number of times the LMI agent did not receive a Status message within the allotted time.
C32 tmnxFRDlcmiTxStatusEnqMsgs	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.5	Counter32	read-only	tmnxFRDlcmiTxStatusEnqMsgs indicates the number of LMI Status Enquiry messages transmitted on this Frame Relay interface.
C32 tmnxFRDlcmiTxStatusMsgs	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.8	Counter32	read-only	tmnxFRDlcmiTxStatusMsgs indicates the number of LMI Status messages transmitted on this Frame Relay interface.
C32 tmnxMcMlpppStatsEgressErrPkt	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.7	Counter32	read-only	The value of tmnxMcMlpppStatsEgressErrPkt indicates the total number of packets discarded due to segmentation errors on the bundle for the given class on egress.
C32 tmnxMcMlpppStatsEgressOct	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.5	Counter32	read-only	The value of tmnxMcMlpppStatsEgressOct indicates the total number of octets in all packets received on the bundle for the given class on egress before segmentation.
C32 tmnxMcMlpppStatsEgressPkt	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.6	Counter32	read-only	The value of tmnxMcMlpppStatsEgressPkt indicates the total number of packets forwarded on the bundle for the given class on egress towards the line.
C32 tmnxMcMlpppStatsIngressErrPkt	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.4	Counter32	read-only	The value of tmnxMcMlpppStatsIngressErrPkt indicates the total number of packets discarded due to reassembly errors on the bundle for the given class on ingress.
C32 tmnxMcMlpppStatsIngressOct	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.2	Counter32	read-only	The value of tmnxMcMlpppStatsIngressOct indicates the total number of octets in all packets received on the bundle for the given class on ingress before reassembly.
C32 tmnxMcMlpppStatsIngressPkt	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.3	Counter32	read-only	The value of tmnxMcMlpppStatsIngressPkt indicates the total number of packets forwarded on the bundle for the given class on ingress towards higher layer protocols.
C32 tmnxPortEtherHCOverPkts1519toMax	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.18	Counter32	read-only	The number of times the associated tmnxPortEtherPkts1519toMax counter has overflowed.
C32 tmnxPortEtherPkts1519toMax	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.17	Counter32	read-only	The total number of packets received that were longer than 1518 octets but less than the maximum frame size for the particular medium, usually 12287 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
Counter64 (69)
C64 tmnxDS1BERTErrors	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.16	Counter64	read-only	tmnxDS1BERTErrors is the number of bit errors detected during the last BERT test. It is valid only after tmnxDS1BERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
C64 tmnxDS1BERTTotalBits	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.17	Counter64	read-only	tmnxDS1BERTTotalBits is the total number of bits received during the last BERT test. Bits are only counted when the BERT hardware is synchronized. It is valid only after tmnxDS1BERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
C64 tmnxDS3ChannelBERTErrors	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.33	Counter64	read-only	tmnxDS3ChannelBERTErrors is the number of bit errors detected during the last BERT test. It is valid only after tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
C64 tmnxDS3ChannelBERTTotalBits	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.34	Counter64	read-only	tmnxDS3ChannelBERTTotalBits is the total number of bits received during the last BERT test. Bits are only counted when the BERT hardware is synchronized. It is valid only after tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
C64 tmnxPortEtherHCPkts1519toMax	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.19	Counter64	read-only	The total number of packets (including bad packets) received that were between 1519 octets in length and the maximum frame size, usually 12287 octets inclusive (excluding framing bits but including FCS octets). The lower 32-bits of this 64-bit counter will equal the value of tmnxPortEtherHCPkts1519toMax. The high 32-bits of this counter will equal the value of tmnxPortEtherHCOverPkts1519toMax.
C64 tmnxPortFCStatsEgrDroInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.16	Counter64	read-only	The number of in-profile octets (rate below CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsEgrDroInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.14	Counter64	read-only	The number of in-profile packets (rate below CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsEgrDroOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.17	Counter64	read-only	The number of out-of-profile octets (rate above CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsEgrDroOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.15	Counter64	read-only	The number of out-of-profile packets (rate above CIR) dropped by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsEgrFwdInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.12	Counter64	read-only	The number of in-profile octets (rate below CIR) forwarded by the egress Qchip.
C64 tmnxPortFCStatsEgrFwdInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.10	Counter64	read-only	The number of in-profile packets (rate below CIR) forwarded by the egress Qchip.
C64 tmnxPortFCStatsEgrFwdOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.13	Counter64	read-only	The number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.
C64 tmnxPortFCStatsEgrFwdOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.11	Counter64	read-only	The number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.
C64 tmnxPortFCStatsIngDroInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.8	Counter64	read-only	The number of in-profile octets (rate below CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsIngDroInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.6	Counter64	read-only	The number of in-profile packets (rate below CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsIngDroOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.9	Counter64	read-only	The number of out-of-profile octets (rate above CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsIngDroOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.7	Counter64	read-only	The number of out-of-profile packets (rate above CIR) dropped by the ingress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.
C64 tmnxPortFCStatsIngFwdInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.4	Counter64	read-only	The number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.
C64 tmnxPortFCStatsIngFwdInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.2	Counter64	read-only	The number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.
C64 tmnxPortFCStatsIngFwdOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.5	Counter64	read-only	The number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.
C64 tmnxPortFCStatsIngFwdOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.3	Counter64	read-only	The number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.
C64 tmnxPortIngrMdaQos00StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.2	Counter64	read-only	tmnxPortIngrMdaQos00StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos00StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.1	Counter64	read-only	tmnxPortIngrMdaQos00StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos01StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.4	Counter64	read-only	tmnxPortIngrMdaQos01StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos01StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.3	Counter64	read-only	tmnxPortIngrMdaQos01StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos02StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.6	Counter64	read-only	tmnxPortIngrMdaQos02StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos02StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.5	Counter64	read-only	tmnxPortIngrMdaQos02StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos03StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.8	Counter64	read-only	tmnxPortIngrMdaQos03StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos03StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.7	Counter64	read-only	tmnxPortIngrMdaQos03StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos04StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.10	Counter64	read-only	tmnxPortIngrMdaQos04StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos04StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.9	Counter64	read-only	tmnxPortIngrMdaQos04StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos05StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.12	Counter64	read-only	tmnxPortIngrMdaQos05StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos05StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.11	Counter64	read-only	tmnxPortIngrMdaQos05StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos06StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.14	Counter64	read-only	tmnxPortIngrMdaQos06StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos06StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.13	Counter64	read-only	tmnxPortIngrMdaQos06StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos07StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.16	Counter64	read-only	tmnxPortIngrMdaQos07StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos07StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.15	Counter64	read-only	tmnxPortIngrMdaQos07StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos08StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.18	Counter64	read-only	tmnxPortIngrMdaQos08StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos08StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.17	Counter64	read-only	tmnxPortIngrMdaQos08StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos09StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.20	Counter64	read-only	tmnxPortIngrMdaQos09StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos09StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.19	Counter64	read-only	tmnxPortIngrMdaQos09StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos10StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.22	Counter64	read-only	tmnxPortIngrMdaQos10StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos10StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.21	Counter64	read-only	tmnxPortIngrMdaQos10StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos11StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.24	Counter64	read-only	tmnxPortIngrMdaQos11StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos11StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.23	Counter64	read-only	tmnxPortIngrMdaQos11StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos12StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.26	Counter64	read-only	tmnxPortIngrMdaQos12StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos12StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.25	Counter64	read-only	tmnxPortIngrMdaQos12StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos13StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.28	Counter64	read-only	tmnxPortIngrMdaQos13StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos13StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.27	Counter64	read-only	tmnxPortIngrMdaQos13StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos14StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.30	Counter64	read-only	tmnxPortIngrMdaQos14StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos14StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.29	Counter64	read-only	tmnxPortIngrMdaQos14StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos15StatDropOcts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.32	Counter64	read-only	tmnxPortIngrMdaQos15StatDropOcts indicates the number of octets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortIngrMdaQos15StatDropPkts	1.3.6.1.4.1.6527.3.1.2.2.4.17.1.31	Counter64	read-only	tmnxPortIngrMdaQos15StatDropPkts indicates the number of packets dropped on the oversubscribed MDA for given Qos classifier result because of an overload condition on the MDA.
C64 tmnxPortNetEgressDroInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.8	Counter64	read-only	tmnxPortNetEgressDroInProfOcts indicates the number of conforming network egress octets dropped on this port using this queue.
C64 tmnxPortNetEgressDroInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.6	Counter64	read-only	tmnxPortNetEgressDroInProfPkts indicates the number of conforming network egress packets dropped on this port using this queue.
C64 tmnxPortNetEgressDroOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.9	Counter64	read-only	tmnxPortNetEgressDroOutProfOcts indicates the number of exceeding network egress octets dropped on this port using this queue.
C64 tmnxPortNetEgressDroOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.7	Counter64	read-only	tmnxPortNetEgressDroOutProfPkts indicates the number of exceeding network egress packets dropped on this port using this queue.
C64 tmnxPortNetEgressFwdInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.4	Counter64	read-only	tmnxPortNetEgressFwdInProfOcts indicates the number of conforming network egress octets forwarded on this port using this queue.
C64 tmnxPortNetEgressFwdInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.2	Counter64	read-only	tmnxPortNetEgressFwdInProfPkts indicates the number of conforming network egress packets forwarded on this port using this queue.
C64 tmnxPortNetEgressFwdOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.5	Counter64	read-only	tmnxPortNetEgressFwdOutProfOcts indicates the number of exceeding network egress octets forwarded on this port using this queue.
C64 tmnxPortNetEgressFwdOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.3	Counter64	read-only	tmnxPortNetEgressFwdOutProfPkts indicates the number of exceeding network egress packets forwarded on this port using this queue.
C64 tmnxPortNetIngressDroInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.8	Counter64	read-only	tmnxPortNetIngressDroInProfOcts indicates the number of conforming network ingress octets dropped on this port using this queue.
C64 tmnxPortNetIngressDroInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.6	Counter64	read-only	tmnxPortNetIngressDroInProfPkts indicates the number of conforming network ingress packets dropped on this port using this queue.
C64 tmnxPortNetIngressDroOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.9	Counter64	read-only	tmnxPortNetIngressDroOutProfOcts indicates the number of exceeding network ingress octets dropped on this port using this queue.
C64 tmnxPortNetIngressDroOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.7	Counter64	read-only	tmnxPortNetIngressDroOutProfPkts indicates the number of exceeding network ingress packets dropped on this port using this queue.
C64 tmnxPortNetIngressFwdInProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.4	Counter64	read-only	tmnxPortNetIngressFwdInProfOcts indicates the number of conforming network ingress octets forwarded on this port using this queue.
C64 tmnxPortNetIngressFwdInProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.2	Counter64	read-only	tmnxPortNetIngressFwdInProfPkts indicates the number of conforming network ingress packets forwarded on this port using this queue.
C64 tmnxPortNetIngressFwdOutProfOcts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.5	Counter64	read-only	tmnxPortNetIngressFwdOutProfOcts indicates the number of exceeding network ingress octets forwarded on this port using this queue.
C64 tmnxPortNetIngressFwdOutProfPkts	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.3	Counter64	read-only	tmnxPortNetIngressFwdOutProfPkts indicates the number of exceeding network ingress packets forwarded on this port using this queue.
DateAndTime (3)
DAT tmnxPortSFPVendorManufactureDate	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.32	DateAndTime	read-only	The vendor's date code.
DAT tmnxPortTestEndTime	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.6	DateAndTime	read-only	The date and time the last test completed. Returns 0 if a test is in progress or no tests have yet to be run on this port.
DAT tmnxPortTestStartTime	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.5	DateAndTime	read-only	The date and time the test started on this port. Returns 0 if tmnxPortTestState is notInTest.
DisplayString (11)
STR tmnxChannelIdxString	1.3.6.1.4.1.6527.3.1.2.2.4.16.1.1	DisplayString	not-accessible	tmnxChannelIdxString is an index into the table. It contains a string identifying a channel on the physical port.
STR tmnxDS3ChannelMDLEicString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.13	DisplayString	read-create	tmnxDS3ChannelMDLEicString configures the Equipment ID Code(EIC) of the Message Data Link (MDL).
STR tmnxDS3ChannelMDLFicString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.15	DisplayString	read-create	tmnxDS3ChannelMDLFicString configures the Frame ID Code(FIC) of the Message Data Link (MDL).
STR tmnxDS3ChannelMDLGenString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.19	DisplayString	read-create	tmnxDS3ChannelMDLGenString configures the generator number string sent in the Message Data Link (MDL) test signal message.
STR tmnxDS3ChannelMDLLicString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.14	DisplayString	read-create	tmnxDS3ChannelMDLLicString configures the Location ID Code(LIC) of the Message Data Link (MDL).
STR tmnxDS3ChannelMDLMonGenString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.30	DisplayString	read-only	tmnxDS3ChannelMDLMonGenString indicates the generator number string received in the Message Data Link (MDL) test signal message.
STR tmnxDS3ChannelMDLMonPortString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.29	DisplayString	read-only	tmnxDS3ChannelMDLMonPortString indicates the port number string received in the Message Data Link (MDL) idle signal message.
STR tmnxDS3ChannelMDLPfiString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.17	DisplayString	read-create	tmnxDS3ChannelMDLPfiString configures the Facility ID Code sent in the Message Data Link (MDL) Path message.
STR tmnxDS3ChannelMDLPortString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.18	DisplayString	read-create	tmnxDS3ChannelMDLPortString configures the port number string sent in the Message Data Link (MDL) idle signal message.
STR tmnxDS3ChannelMDLUnitString	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.16	DisplayString	read-create	tmnxDS3ChannelMDLUnitString configures the Unit ID Code(UIC) of the Message Data Link (MDL).
STR tmnxPortSchedOverrideSchedName	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.2	DisplayString	read-only	The value of tmnxPortSchedOverrideSchedName indicates the name of the port scheduler policy that this row entry overrides.
Gauge32 (2)
G32 tmnxBundleImaGrpAvailRxCR	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.14	Gauge32	read-only	tmnxBundleImaGrpAvailRxCR specifies the available bandwidth on this IMA group in the receive direction. It only considers members that are in the Active State.
G32 tmnxBundleImaGrpAvailTxCR	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.13	Gauge32	read-only	tmnxBundleImaGrpAvailTxCR specifies the available transmit bandwidth on this IMA group. It only considers members that are in the Active State.
INTEGER (78)
INT tmnxATMIntfCellFormat	1.3.6.1.4.1.6527.3.1.2.2.11.1.1.1	INTEGER	read-write	tmnxATMIntfCellFormat is used to set the cell format (UNI or NNI) that is to be used on the ATM interface.
INT tmnxATMIntfMapping	1.3.6.1.4.1.6527.3.1.2.2.11.1.1.3	INTEGER	read-write	The value of tmnxATMIntfMapping specifies the cell mapping that is to be used on this ATM interface. When tmnxPortChanType does not have a value of 'pdhDs3 (14)', 'inconsistentValue' error will be returned to SNMP SET requests. When tmnxPortChanType has a value of 'pdhDs3 (14)', tmnxATMIntfMapping can be set to 'plcp (2)'.
INT tmnxBundleImaGrpAlphaValue	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.23	INTEGER	read-create	tmnxBundleImaGrpAlphaValue specifies the number of consecutive ICP cells that need to be detected before moving from the IMA Sync State to the IMA Hunt State.
INT tmnxBundleImaGrpBetaValue	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.24	INTEGER	read-create	tmnxBundleImaGrpBetaValue specifies the number of consecutive errored ICP cells that need to be detected before moving from the IMA Sync State to the IMA Hunt State
INT tmnxBundleImaGrpGammaValue	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.25	INTEGER	read-create	tmnxBundleImaGrpGammaValue specifies the number of consecutive valid ICP cells that need to be detected before moving from the IMA pre-Sync State to the IMA Hunt State.
INT tmnxBundleImaGrpRxId	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.5	INTEGER	read-only	tmnxBundleImaGrpRxId specifies the IMA ID generated at group creation time used by the far-end.
INT tmnxBundleImaGrpRxOamLablVal	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.22	INTEGER	read-only	tmnxBundleImaGrpRxOamLablVal specifies far-end value received.
INT tmnxBundleImaGrpSymmetryMode	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.3	INTEGER	read-create	tmnxBundleImaGrpSymmetryMode specifies the type of cell rate transfer over the virtual link.
INT tmnxBundleImaGrpTestPattern	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.32	INTEGER	read-create	tmnxBundleImaGrpTestPattern specifies the Transmit Test Pattern in an IMA group loopback operation. This value may only be changed when tmnxBundleImaGrpTestState is 'disabled'.
INT tmnxBundleImaGrpTxId	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.4	INTEGER	read-only	tmnxBundleImaGrpTxId specifies the IMA Id generated at group creation time used by the near-end.
INT tmnxBundleImaGrpTxOamLablVal	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.21	INTEGER	read-only	tmnxBundleImaGrpTxOamLablVal specifies near-end value to be transmitted.
INT tmnxBundleMemberDownReason	1.3.6.1.4.1.6527.3.1.2.2.4.15.1.3	INTEGER	read-only	tmnxBundleMemberDownReason contains the reason code for marking the member link of the bundle to down (i.e. tmnxBundleMemberActive will be set to false): none - The link is active and the value of tmnxBundleMemberActive is 'true'. outOfService - The link operational status is down. redDiffDelayExceeded - The differential delay of the link exceeded the configured value of red differential delay and tmnxBundleRedDiffDelayAction was configured as 'down'. mismatchEndPtDiscriminator - Detected inconsistent peer endpoint discriminator for the bundle. peerNotBundleMember - When the peer is either not added to the bundle or is removed from the bundle. underNegotiation - When the local end is trying to negotiate with the peer. peerInvalidMlHdrFmt - The peer does not support the required ML-PPP header format. The remote peer must support the same short/long sequence code, and at least as many classes as configured for the local bundle.
INT tmnxBundleMemberImaRxLid	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.8	INTEGER	read-only	tmnxBundleMemberImaRxLid indicates the Link Identifier used on the receive IMA link.
INT tmnxBundleMemberImaRxTestPattern	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.28	INTEGER	read-only	tmnxBundleMemberImaRxTestPattern indicates the received test pattern value on this link.
INT tmnxBundleMemberImaTxLid	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.7	INTEGER	read-only	tmnxBundleMemberImaTxLid indicates the Link Identifier assigned to the transmit IMA link.
INT tmnxBundleMlpppClassCount	1.3.6.1.4.1.6527.3.1.2.2.4.26.1.3	INTEGER	read-create	The value of tmnxBundleMlpppClassCount specifies whether Multiclass MLPPP is enabled on a bundle with a tmnxBundleType of 'mlppp' and when enabled what is the number of classes to be negotiated/supported over the MLPPP bundle. The value of 0 disables multiclass MLPPP including negotiation in the PPP protocol. All other values specify the number of classes to be supported on a given multiclass bundle and enable Multiclass MLPPP negotiation on that bundle. Non-zero values supported are platform/MDA specific. The value of tmnxBundleMlpppClassCount must be set to 0 and cannot be changed when LFI is enabled on the bundle (see tmnxBundleLFI object in tmnxBundleTable). The value of tmnxBundleMlpppClassCount may be modified only when tmnxBundleNumLinks is zero. To set the value of tmnxBundleMlpppClassCount to a value greater than 4, the long sequence format must be enabled on the bundle (see tmnxBundleShortSequence object in tmnxBundleTable). Changing the value of tmnxBundleMlpppClassCount resets the values of tmnxBundleMlpppIngQoSProfId and tmnxBundleMlpppEgrQoSProfId to their defaults
INT tmnxBundleProtectedType	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.21	INTEGER	read-create	tmnxBundleProtectedType identifies how this bundle is part of a tmnxBundleParentBundle. A value of 'none' identifies no protection, 'working' identifies it to be a working bundle of a tmnxBundleParentBundle and 'protection' identifies it to be a protection bundle of a tmnxBundleParentBundle. tmnxBundleProtectedType can only be set at row creation.
INT tmnxBundleRedDiffDelayAction	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.12	INTEGER	read-create	tmnxBundleRedDiffDelayAction specifies the action to be taken when the differential delay exceeds the threshold configured in tmnxBundleRedDiffDelay. For a tmnxBundleType value of 'imagrp', only the down action is supported.
INT tmnxBundleType	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.3	INTEGER	read-create	tmnxBundleType specifies the type of this multilink bundle. It provides a reference as to the type of bundle this row refers to but does not map to the direct value of bndle type defined in TmnxBundleID.
INT tmnxDDMAux1Type	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.32	INTEGER	read-only	The value of tmnxDDMAux1Type indicates the measurement type of the Manufacturer specific Auxiliary 1 information of the XFP: none (0) - not specified. adp-bias-voltage (1) - LSB is 10mV. reserved-2 (2) - reserved for future use. tec-current (3) - LSB is 100uA. laser-temp (4) - degrees Celsius(C). laser-wavelength (5) - LSB is 0.05 nm. voltage-50 (6) - 5.0 supply voltage, LSB=100uV. voltage-33 (7) - 3.3 supply voltage, LSB=100uV. voltage-18 (8) - 1.8 supply voltage, LSB=100uV, voltage-52 (9) - -5.2 supply voltage, LSB=100uV. current-50 (10) - 5.0V supply current, LSB=100uA. reserved-11 (11) - reserved for future use. reserved-12 (12) - reserved for future use. current-33 (13) - 3.3V supply current, LSB=100uA. current-18 (14) - 1.8V supply current, LSB=100uA. current-52 (15) - -5.2V supply current, LSB=100uA.
INT tmnxDDMAux2Type	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.38	INTEGER	read-only	The value of tmnxDDMAux2Type indicates the measurement type of the Manufacturer specific Auxiliary 2 information of the XFP: none (0) - not specified. adp-bias-voltage (1) - LSB is 10mV. reserved-2 (2) - reserved for future use. tec-current (3) - LSB is 100uA. laser-temp (4) - degrees Celsius(C). laser-wavelength (5) - LSB is 0.05 nm. voltage-50 (6) - 5.0 supply voltage, LSB=100uV. voltage-33 (7) - 3.3 supply voltage, LSB=100uV. voltage-18 (8) - 1.8 supply voltage, LSB=100uV, voltage-52 (9) - -5.2 supply voltage, LSB=100uV. current-50 (10) - 5.0V supply current, LSB=100uA. reserved-11 (11) - reserved for future use. reserved-12 (12) - reserved for future use. current-33 (13) - 3.3V supply current, LSB=100uA. current-18 (14) - 1.8V supply current, LSB=100uA. current-52 (15) - -5.2V supply current, LSB=100uA.
INT tmnxDDMFailedObject	1.3.6.1.4.1.6527.3.1.2.2.7.9	INTEGER	accessible-for-notify	Used by Digital Diagnostic Monitoring (DDM) Notifications, the value of tmnxDDMFailedObject indicates which object of the monitored SFP/XFP is in a failed or cleared threshold state.
INT tmnxDDMRxOpticalPowerType	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.26	INTEGER	read-only	The value of tmnxDDMRxOpticalPowerType indicates whether the tmnxDDMRxOpticalPower was taken as an average, or as an Optical Modulation Amplitude (OMA).
INT tmnxDS0ChanGroupCRC	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.4	INTEGER	read-create	The value of tmnxDS0ChanGroupCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the error detection ability, but it also adds some performance overhead. For channel groups with encapsulation set to ATM, the default and only supported value is crc32 and applies to AAL5 CRC calculations on that channel group.
INT tmnxDS0ChanGroupSpeed	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.3	INTEGER	read-create	tmnxDS0ChanGroupSpeed configures the required link speed for all the time slots included in this channel group.
INT tmnxDS1Framing	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.3	INTEGER	read-create	The value of tmnxDS1Framing indicates the type of framing associated with the channel: esf ESF (extended super frame) mode for T1 interfaces. sf SF (super frame) mode for T1 interfaces. g704 G.704 framing format for E1 interfaces. g704-no-crc4 G.704 framing with no CRC4 for E1 interfaces. e1-unframed E1 Unframed (G.703) mode for E1 interfaces. ds1-unframed Unframed mode for T1 interfaces. If tmnxDS1Type is set to 'ds1', the default framing is 'esf'. If tmnxDS1Type is set to 'e1', the default framing is 'g704'. Changing the value of tmnxDS1Framing resets the values of tmnxDS1BerSdThreshold and tmnxDS1BerSfThreshold to defaults and turns off reporting of berSd and berSf alarms in tmnxDS1ReportAlarm.
INT tmnxDS1PortBuildout	1.3.6.1.4.1.6527.3.1.2.2.4.23.1.1	INTEGER	read-create	tmnxDS1PortBuildout configures the cable buildout length. A ds1 port has two settings for the DS1 cable buildout: a 'short' setting, for cable lengths of less than or equal to 655 feet, and a 'long' setting for cable lengths of greater than 655 feet. This object applies to copper-cable-based DS1 ports only.
INT tmnxDS1PortLbo	1.3.6.1.4.1.6527.3.1.2.2.4.23.1.5	INTEGER	read-create	tmnxDS1PortLbo configuration only applies to a ds1 port configured with a 'long' buildout. tmnxDS1PortLbo configures the number of decibels(dB) the transmission signal decreases over the line. For 'short' buildout the following values are valid: lboNotApplicable - Not applicable For 'long' buildout the following values are valid: lbo0dB - For 0 dB lboNeg7p5dB - For -7.5 dB lboNeg15p0dB - For -15.0 dB lboNeg22p5dB - For -22.5 dB The default for 'short' build out is 'lboNotApplicable' while the default for 'long' buildout is 'lbo0dB'
INT tmnxDS1PortLineLength	1.3.6.1.4.1.6527.3.1.2.2.4.23.1.4	INTEGER	read-create	tmnxDS1PortLineLength configuration only applies to a ds1 port configured with a 'short' buildout. tmnxDS1PortLineLength configures the length of the line (in feet). For line lengths longer than 655 feet configure the ds1 port buildout as 'long'. For 'long' buildout the following values are valid: lengthNotApplicable - Not applicable For 'short' buildout the following values are valid: length0To133 - For line length from 0 to 133 feet length134To266 - For line length from 134 to 266 feet length267To399 - For line length from 267 to 399 feet length400To533 - For line length from 400 to 533 feet length534To655 - For line length from 534 to 655 feet The default for 'long' buildout is 'lengthNotApplicable' while the default for 'short' buildout is 'length0To133'.
INT tmnxDS1PortType	1.3.6.1.4.1.6527.3.1.2.2.4.23.1.3	INTEGER	read-create	tmnxDS1PortType configures the type of the physical port to 'ds1', 'e1' or 'j1'.
INT tmnxDS1SignalMode	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.21	INTEGER	read-create	The value of tmnxDS1SignalMode indicates the type of signalling associated with the channel: none - Indicates no signalling on this channel. cas - Indicates Channel Associated Signalling (CAS) on this channel. The default signalling is 'none'.
INT tmnxDS1Type	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.2	INTEGER	read-only	The value of tmnxDS1Type indicates whether the DS1 channel is in DS1, E1 or J1 mode.
INT tmnxDS3Buildout	1.3.6.1.4.1.6527.3.1.2.2.4.10.1.1	INTEGER	read-create	tmnxDS3Buildout configures the T3 line buildout. A T3 port has two settings for the T3 line buildout: a short setting, which is less than 225 feet, and a long setting, which is greater than 225 feet. This object applies to copper-cable-based T3 ports only.
INT tmnxDS3ChannelChannelized	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.5	INTEGER	read-create	tmnxDS3ChannelChannelized is used to create sub-channels of type 'ds1' or 'e1' or 'j1' on the interface. Setting the value to 'none' removes the sub-channels on the interface.
INT tmnxDS3ChannelCRC	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.22	INTEGER	read-create	The value of tmnxDS3ChannelCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the error detection ability, but it also adds some performance overhead. For ATM channels, crc32 is the default and the only value supported and applies to AAL5 CRC calculation on that channel.
INT tmnxDS3ChannelFraming	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.3	INTEGER	read-create	The value of tmnxDS3ChannelFraming indicates the type of framing associated with the DS3 channel. If tmnxDS3ChannelType is set to 'ds3', the default framing is 'cbit'. If tmnxDS3ChannelType is set to 'e3', the default framing is 'g751'.
INT tmnxDS3ChannelSubrateCSUMode	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.6	INTEGER	read-create	tmnxDS3ChannelSubrateCSUMode configures the channel service unit (CSU) compatibility mode to interoperate with existing DS3 subrate standards. This configuration applies only for a non-channelized DS3. Changing the value of tmnxDS3ChannelSubrateCSUMode to notUsed resets the value of tmnxDS3ChannelScramble to 'false'. Changing the value of tmnxDS3ChannelSubrateCSUMode resets the value of tmnxDS3ChannelSubrate to default for the mode if tmnxDS3ChannelSubrate is not provided.
INT tmnxDS3ChannelType	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.2	INTEGER	read-only	The value of tmnxDS3ChannelType indicates whether the channel is in DS3 or E3 mode.
INT tmnxDS3Type	1.3.6.1.4.1.6527.3.1.2.2.4.10.1.3	INTEGER	read-create	tmnxDS3Type configures the type of the physical port to 'ds3' or 'e3'.
INT tmnxFRDlcmiMode	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.1	INTEGER	read-write	tmnxFRDlcmiMode is used to set the mode of the interface. It can be set as Data terminal equipment (dte), Data circuit-terminating equipment (dce) or both as Data terminal equipment and Data circuit-terminating equipment (bidir).
INT tmnxFRDlcmiN392Dce	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.2	INTEGER	read-write	tmnxFRDlcmiN392Dce is used to configure the LMI error threshold for DCE interface.
INT tmnxFRDlcmiN393Dce	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.3	INTEGER	read-write	tmnxFRDlcmiN393Dce is used to configure the LMI monitored event count for DCE interface.
INT tmnxFRDlcmiT392Dce	1.3.6.1.4.1.6527.3.1.2.2.9.1.1.4	INTEGER	read-write	tmnxFRDlcmiT392Dce is used to configure the polling verification timer for the Frame Relay DCE interface.
INT tmnxObjectAppType	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.3	INTEGER	not-accessible	The object tmnxObjectAppType specifies the nature of usage the pool would be used for. The pools could be used for access or network traffic at either ingress or egress.
INT tmnxObjectType	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.1	INTEGER	not-accessible	The object tmnxObjectType defines the type of object to which the pool is being setup for.
INT tmnxPortBundleNumber	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.51	INTEGER	read-only	tmnxPortBundleNumber identifies the bundle for which this port is a member. If this port is not a member of any bundle, the value of tmnxPortBundleNumber will be zero.
INT tmnxPortEncapType	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.12	INTEGER	read-write	The type of encapsulation protocol configured on this port's network interface. If tmnxPortEncapType has a value of 'nullEncap', frames received will not carry any tags or labels and as a result only one service can be configured on this port. Sometimes this is referred to as raw Ethernet packets. If tmnxPortEncapType has a value of 'qEncap', ingress frames carry 802.1q tags where each different tag can signify a different service. This is not a valid value if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'bcpNullEncap', Bcp is used on the sonet path as the NCP control protocol. The BCP IEEE 802 Tagged Frame Configuration Option (type 8) is negotiated to 'enabled'. VLAN tagged frames are allowed into the sonet path. Only a single SAP can be associated with the sonet path. 'bcpNullEncap' is valid only if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'bcpDot1qEncap', BCP is used as the NCP control protocol. The BCP IEEE 802 Tagged Frame Configuration Option (type 8) is negotiated to 'enabled'. VLAN tagged frames are allowed on the sonet path. This encapsulation type is required when multiple SAPs are defined on the sonet path where each one is service delimited by a provisioned Dot1q tag. When 'bcpDot1qEncap' is specified, BCP does not enter the 'open' state unless the far end peer also supports 'bcpDot1qEncap'. This allows a LCP negotiation to transmit configuration request and confirmation messages to enable this feature. 'bcpDot1qEncap' is a valid value only if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'ipcpEncap', BCP will not be used on this sonet path. IPCP NCP is used instead. 'ipcpEncap' is a valid only if tmnxPortClass has a value of 'sonetPath'. If tmnxPortEncapType has a value of 'frEncap', Frame Relay is the expected encapsulation. If tmnxPortEncapType has a value of 'pppAutoEncap', IPCP is automatically enabled. This encap type is only valid on ports/paths in network mode. If tmnxPortEncapType has a value of 'atmEncap', the encapsulation on the port is ATM. The 'atmEncap' is also used when mirroring ATM ports. If tmnxPortEncapType has a value of 'wanMirrorEncap', the port is used for mirroring of frame-relay and POS ports. On such ports no link management protocol would run. If tmnxPortEncapType has a value of 'ciscoHDLCEncap', the Cisco HDLC encapsulation is applied. This encap type is only valid if TmnxPortClass has a value of 'tdm' or 'sonet'. If tmnxPortEncapType has a value of 'cemEncap', encapsulation of frames will be circuit emulation. This is used to support transparent transmission of frames. This encap type is only valid if TmnxPortClass has a value of 'tdm' or 'sonet' in access mode. tmnxPortEncapType is set to 'unknown' for physical SONET/SDH and TDM ports.
INT tmnxPortEtherAutoNegotiate	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.4	INTEGER	read-write	When the value of tmnxPortEtherAutoNegotiate is 'true', the Ethernet interface will automatically negotiate link parameters with the far end (including speed and duplex), and will advertise all speeds and duplex modes supported by the interface. When the value of tmnxPortEtherAutoNegotiate is 'limited', the Ethernet interface will automatically negotiate link parameters with the far end, but will only advertise the speed and duplex mode specified by tmnxPortEtherSpeed and tmnxPortEtherDuplex. If tmnxPortEtherAutoNegotiate is 'false', the Ethernet interface won't negotiate link parameters with the far end and will instead force the speed and duplex mode to the values specified by tmnxPortEtherSpeed and tmnxPortEtherDuplex respectively.
INT tmnxPortEtherDownWhenLoopedState	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.24	INTEGER	read-only	The value of tmnxPortEtherDownWhenLoopedState indicates whether a physical loop has been detected on the port or not. If tmnxPortEtherDownWhenLoopedEnabled is set to 'false', this value will be 'noLoopDetected'.
INT tmnxPortEtherDuplex	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.2	INTEGER	read-write	The tmnxPortEtherDuplex variable specifies the duplex mode used by the Ethernet interface if tmnxPortEtherAutoNegotiate has a value of 'false' or 'limited'. If tmnxPortEtherAutoNegotiate has a value of 'true', the link parameters are negotiated with the far end and the tmnxPortEtherDuplex variable is ignored. A value of 'fullDuplex' sets the link to full duplex mode. A value of 'halfDuplex' sets the link to half duplex mode. tmnxPortEtherDuplex is only valid on Ethernet interfaces that support multiple duplex modes.
INT tmnxPortEtherMDIMDIX	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.9	INTEGER	read-only	The tmnxPortEtherMDIMDIX variable indicates whether the Ethernet interface is of type 'mdi' (Media Dependent Interface) or 'mdix' (Media Dependent Interface with crossover). If the agent cannot identify the type of Ethernet interface the value 'unknown (0)' is indicated. tmnxPortEtherMDIMDIX is only valid if tmnxPortClass is 'faste' or 'xcme'.
INT tmnxPortEtherOperDuplex	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.5	INTEGER	read-only	The tmnxPortEtherOperDuplex variable indicates the operational duplex mode of the Ethernet interface. A value of 'fullDuplex' indicates that the link is in full duplex mode. A value of 'halfDuplex' indicates that the link is in half duplex mode. tmnxPortEtherOperDuplex is only valid if tmnxPortClass is 'faste' or 'xcme'.
INT tmnxPortEtherSpeed	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.3	INTEGER	read-write	The tmnxPortEtherSpeed variable specifies the link speed of the Ethernet interface if tmnxPortEtherAutoNegotiate has a value of 'false' or 'limited'. If tmnxPortEtherAutoNegotiate has a value of 'true', the link parameters are negotiated with the far end and the tmnxPortEtherSpeed variable is ignored. A value of 'speed10' sets the link to 10 mbps. A value of 'speed100' sets the link to 100 mbps. A value of 'speed1000' sets the link to 1000 mbps (1 gbps). tmnxPortEtherSpeed is only valid on Ethernet interfaces that support multiple link speeds.
INT tmnxPortEtherXGigMode	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.10	INTEGER	read-write	The tmnxPortEtherXGigMode variable specifies whether the Ethernet interface is in LAN or WAN mode. tmnxPortEtherXGigMode must be 'notApplicable' if tmnxPortClass is not 'xgige'.
INT tmnxPortLoadBalanceAlgorithm	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.56	INTEGER	read-write	The value of tmnxPortLoadBalanceAlgorithm specifies the load balancing algorithm to be used on this port. When the value is 'includeL4', the src and dst port are used in the hashing algorithm. When it's 'excludeL4', they are not included. When the value is 'default', the port inherits the global settings in tmnxL4LoadBalancing. The value is 'notApplicable' for ports that do not pass any traffic. An attempt to modify this object when it is set to 'notApplicable' will return an inconsistentValue error.
INT tmnxPortMode	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.11	INTEGER	read-write	The tmnxPortMode variable indicates if the interface on this port is configured as a service access port or a network access port. If the port mode equals 'access', and the tmnxMDAAssignedType is of ATM MDA family, then tmnxPortEncapType is automatically set to 'atmEncap'. If port mode equals 'access', tmnxPortEncapType must also be configured to 'qEncap' (For Ethernet MDAs) or to 'bcpNullEncap' for Sonet/SDH MDAs. Once the port's operation mode has been configured for 'access' mode, multiple services may be configured on the port. If the port mode equals 'network', tmnxPortEncapType must also be configured to 'nullEncap' (Ethernet MDAs), or 'pppAutoEncap' (Sonet/SDH MDAs) and tmnxPortEncapType is defaulted to those values on the mode change.
INT tmnxPortNotifyDS1AlarmReason	1.3.6.1.4.1.6527.3.1.2.2.7.6	INTEGER	accessible-for-notify	Used by tmnx DS1 Port Notifications, the value of tmnxPortNotifyDS1AlarmReason indicates the reason a DS1 interface alarm has been raised.
INT tmnxPortNotifyDS3AlarmReason	1.3.6.1.4.1.6527.3.1.2.2.7.5	INTEGER	accessible-for-notify	Used by tmnx DS3 Port Notifications, the value of tmnxPortNotifyDS3AlarmReason indicates the reason a DS3 interface alarm has been raised.
INT tmnxPortNotifyError	1.3.6.1.4.1.6527.3.1.2.2.7.4	INTEGER	accessible-for-notify	Used by tmnxEqPortError notification, the value of tmnxPortNotifyError indicates the reason a port has an error.
INT tmnxPortNotifySonetAlarmReason	1.3.6.1.4.1.6527.3.1.2.2.7.2	INTEGER	accessible-for-notify	Used by tmnx sonet Port Notifications, the value of tmnxPortNotifySonetAlarmReason indicates the reason a sonet port alarm has been raised.
INT tmnxPortNotifySonetPathAlarmReason	1.3.6.1.4.1.6527.3.1.2.2.7.3	INTEGER	accessible-for-notify	Used by tmnx sonet path Notifications, the value of tmnxPortNotifySonetPathAlarmReason indicates the reason a sonet path alarm has been raised.
INT tmnxPortSFPConnectorCode	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.30	INTEGER	read-only	The external connector provided on the interface.
INT tmnxPortSFPMedia	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.33	INTEGER	read-only	The media supported for the SFP.
INT tmnxPortSFPStatus	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.65	INTEGER	read-only	The value of tmnxPortSFPStatus indicates the operational status of the inserted SFP/XFP. If tmnxPortSFPEquipped is false, the tmnxPortSFPStatus will be 'not-equipped (0)', otherwise 'operational (1)' if no failure is detected. A failure to read the SFP data will result in a 'read-error (2)', while corrupted information on the SFP will result in either 'data-corrupt (3)', or 'ddm-corrupt (4)' if an SFP read results in invalid data or DDM information respectively. An insertion of an unsupported SFP will result in 'unsupported (5)'. A trap will be raised if the value of tmnxPortSFPStatus indicates a failure; that is the tmnxPortSFPStatus is neither 'not-equipped (0)', nor 'operational (1)'.
INT tmnxPortTestAction	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.8	INTEGER	read-write	The operator sets this variable to perform the appropriate type of testing.
INT tmnxPortTestDuration	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.7	INTEGER	read-write	The number of seconds the port test is anticipated to last.
INT tmnxPortTestLastResult	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.4	INTEGER	read-only	The status of the last test executed on this port.
INT tmnxPortTestMode	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.2	INTEGER	read-write	The type of test to be executed on this port.
INT tmnxPortTestState	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.1	INTEGER	read-only	The current testing status of this port.
INT tmnxPortTransceiverDiagCapable	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.28	INTEGER	read-only	Indicates if the transceiver is capable of doing diagnostics.
INT tmnxPortTransceiverType	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.25	INTEGER	read-only	Type of the transceiver.
INT tmnxSonetClockSource	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.2	INTEGER	read-write	tmnxSonetClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed') or from a clock recovered from the line's receive data stream ('loopTimed').
INT tmnxSonetFraming	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.3	INTEGER	read-write	The value of tmnxSonetFraming indicates the type of framing used on this interface.
INT tmnxSonetLoopback	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.16	INTEGER	read-write	Activate a loopback on the SONET port. The SONET port must be in a shutdown state to activate any type of loopback.
INT tmnxSonetPathCRC	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.7	INTEGER	read-create	The value of tmnxSonetPathCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the error detection ability, but it also adds some performance overhead. For paths with encapsulation set to ATM the default and only supported value is crc32 and applies to AAL5 CRC calculations on that path.
INT tmnxSonetPathType	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.16	INTEGER	read-create	tmnxSonetPathType specifies if the associated SONET/SDH Path is an asynchronous circuit, a virtual tributary group or a tributary unit group. ds3 - Configures the port or channel as service access(ds3) e3 - Configures the port or channel as service access(e3) vtg - Configures the path as a virtual tributary group. tug-2 - Configures the path as a tributary unit group. tug-3 - Configures the port or channel for transport network use.
INT tmnxSonetSectionTraceMode	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.18	INTEGER	read-write	The tmnxSonetSectionTraceMode variable along with the tmnxSonetJ0String object determines the contents of the section trace bytes (j0/z0) in the SONET Section Header. If the mode is set to 'increment-z0', then the j0 byte is 0x01, and the z0 byte increments. If the mode is set to 'byte', then the j0 byte is the first octet of the tmnxSonetJ0String object and the z0 byte is 0xcc. If the mode is set to 'string', then the J0 byte is set to the 16 values in the tmnxSonetJ0String object and the z0 byte is 0xcc.
INT tmnxSonetSpeed	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.1	INTEGER	read-write	The rate of this optical facility.
Integer32 (47)
I32 tmnxATMIntfMinVpValue	1.3.6.1.4.1.6527.3.1.2.2.11.1.1.2	Integer32	read-write	tmnxATMIntfMinVpValue is used to set the minimum allowable VPI value that can be used on the ATM interface for a VPC.
I32 tmnxDDMAux1	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.27	Integer32	read-only	The value of tmnxDDMAux1 indicates the Manufacturer specific Auxiliary 1 information of the XFP.
I32 tmnxDDMAux1HiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.31	Integer32	read-only	The value of tmnxDDMAux1HiAlarm indicates the Manufacturer specific Auxiliary 1 hi-alarm threshold for the XFP.
I32 tmnxDDMAux1HiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.30	Integer32	read-only	The value of tmnxDDMAux1HiWarning indicates the Manufacturer specific Auxiliary 1 hi-warning threshold for the XFP.
I32 tmnxDDMAux1LowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.29	Integer32	read-only	The value of tmnxDDMAux1LowAlarm indicates the Manufacturer specific Auxiliary 1 low-alarm threshold for the XFP.
I32 tmnxDDMAux1LowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.28	Integer32	read-only	The value of tmnxDDMAux1LowWarning indicates the Manufacturer specific Auxiliary 1 low-warning threshold for the XFP.
I32 tmnxDDMAux2	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.33	Integer32	read-only	The value of tmnxDDMAux2 indicates the Manufacturer specific Auxiliary 2 information of the SFP/XFP.
I32 tmnxDDMAux2HiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.37	Integer32	read-only	The value of tmnxDDMAux2HiAlarm indicates the Manufacturer specific Auxiliary 2 hi-alarm threshold for the XFP.
I32 tmnxDDMAux2HiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.36	Integer32	read-only	The value of tmnxDDMAux2HiWarning indicates the Manufacturer specific Auxiliary 2 hi-warning threshold for the XFP.
I32 tmnxDDMAux2LowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.35	Integer32	read-only	The value of tmnxDDMAux2LowAlarm indicates the Manufacturer specific Auxiliary 2 low-alarm threshold for the XFP.
I32 tmnxDDMAux2LowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.34	Integer32	read-only	The value of tmnxDDMAux2LowWarning indicates the Manufacturer specific Auxiliary 2 low-warning threshold for the XFP.
I32 tmnxDDMExtCalTemperatureOffset	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.51	Integer32	read-only	The value of tmnxDDMExtCalTemperatureOffset indicates the T(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
I32 tmnxDDMExtCalTxLaserBiasOffset	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.47	Integer32	read-only	The value of tmnxDDMExtCalTxLaserBiasOffset indicates the Tx_l(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
I32 tmnxDDMExtCalTxPowerOffset	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.49	Integer32	read-only	The value of tmnxDDMExtCalTxPowerOffset indicates the Tx_PWR(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
I32 tmnxDDMExtCalVoltageOffset	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.53	Integer32	read-only	The value of tmnxDDMExtCalVoltageOffset indicates the V(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
I32 tmnxDDMRxOpticalPower	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.21	Integer32	read-only	The value of tmnxDDMRxOpticalPower indicates the current Received Optical Power of the SFP/XFP in micro-Watts (uW).
I32 tmnxDDMRxOpticalPowerHiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.25	Integer32	read-only	The value of tmnxDDMRxOpticalPowerHiAlarm indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm.
I32 tmnxDDMRxOpticalPowerHiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.24	Integer32	read-only	The value of tmnxDDMRxOpticalPowerHiWarning indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-warning.
I32 tmnxDDMRxOpticalPowerLowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.23	Integer32	read-only	The value of tmnxDDMRxOpticalPowerLowAlarm indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a low-alarm.
I32 tmnxDDMRxOpticalPowerLowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.22	Integer32	read-only	The value of tmnxDDMRxOpticalPowerLowWarning indicates the Received Optical Power of the SFP/XFP in micro-Watts (uW) that triggers a low-warning.
I32 tmnxDDMSupplyVoltage	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.6	Integer32	read-only	The value of tmnxDDMSupplyVoltage indicates the current supply voltage of the SFP/XFP in micro-Volts (uV).
I32 tmnxDDMSupplyVoltageHiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.10	Integer32	read-only	The value of tmnxDDMSupplyVoltageHiAlarm indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a hi-alarm.
I32 tmnxDDMSupplyVoltageHiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.9	Integer32	read-only	The value of tmnxDDMSupplyVoltageHiWarning indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a hi-warning.
I32 tmnxDDMSupplyVoltageLowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.8	Integer32	read-only	The value of tmnxDDMSupplyVoltageLowAlarm indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a low-alarm.
I32 tmnxDDMSupplyVoltageLowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.7	Integer32	read-only	The value of tmnxDDMSupplyVoltageLowWarning indicates the supply voltage of the SFP/XFP in micro-Volts (uV) that triggers a low-warning.
I32 tmnxDDMTemperature	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.1	Integer32	read-only	The value of tmnxDDMTemperature indicates the current temperature of the SFP/XFP in degrees Celsius.
I32 tmnxDDMTempHiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.5	Integer32	read-only	The value of tmnxDDMTempHiAlarm indicates the temperature of the SFP/XFP in degrees Celsius that triggers a hi-alarm.
I32 tmnxDDMTempHiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.4	Integer32	read-only	The value of tmnxDDMTempHiWarning indicates the temperature of the SFP/XFP in degrees Celsius that triggers a hi-warning.
I32 tmnxDDMTempLowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.3	Integer32	read-only	The value of tmnxDDMTempLowAlarm indicates the temperature of the SFP/XFP in degrees Celsius that triggers a low-alarm.
I32 tmnxDDMTempLowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.2	Integer32	read-only	The value of tmnxDDMTempLowWarning indicates the temperature of the SFP/XFP in degrees Celsius that triggers a low-warning.
I32 tmnxDDMTxBiasCurrent	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.11	Integer32	read-only	The value of tmnxDDMTxBiasCurrent indicates the current Transmit Bias Current of the SFP/XFP in micro-Amperes (uA).
I32 tmnxDDMTxBiasCurrentHiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.15	Integer32	read-only	The value of tmnxDDMTxBiasCurrentHiAlarm indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a hi-alarm.
I32 tmnxDDMTxBiasCurrentHiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.14	Integer32	read-only	The value of tmnxDDMTxBiasCurrentHiWarning indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a hi-warning.
I32 tmnxDDMTxBiasCurrentLowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.13	Integer32	read-only	The value of tmnxDDMTxBiasCurrentLowAlarm indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a low-alarm.
I32 tmnxDDMTxBiasCurrentLowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.12	Integer32	read-only	The value of tmnxDDMTxBiasCurrentLowWarning indicates the Transmit Bias Current of the SFP/XFP in micro-Amperes (uA) that triggers a low-warning.
I32 tmnxDDMTxOutputPower	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.16	Integer32	read-only	The value of tmnxDDMTxOutputPower indicates the current Output Power of the SFP/XFP in micro-Watts (uW).
I32 tmnxDDMTxOutputPowerHiAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.20	Integer32	read-only	The value of tmnxDDMTxOutputPowerHiAlarm indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm.
I32 tmnxDDMTxOutputPowerHiWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.19	Integer32	read-only	The value of tmnxDDMTxOutputPowerHiWarning indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a hi-alarm.
I32 tmnxDDMTxOutputPowerLowAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.18	Integer32	read-only	The value of tmnxDDMTxOutputPowerLowAlarm indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a low-alarm.
I32 tmnxDDMTxOutputPowerLowWarning	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.17	Integer32	read-only	The value of tmnxDDMTxOutputPowerLowWarning indicates the Output Power of the SFP/XFP in micro-Watts (uW) that triggers a low-warning.
I32 tmnxDS1BitErrorInsertionRate	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.7	Integer32	read-create	tmnxDS1BitErrorInsertionRate is used to insert bit errors for a BERT test. The number of error corresponds to 10^(-rate). A rate of 7 will cause an error rate of 10^(-7), or 1 error in every 10 million bits transmitted. If the value is set to 0, disables the insertion of bit errors into the BERT. Change in this value while the test is running is accepted but does not take effect until the test gets restarted.
I32 tmnxDS1PortDbGain	1.3.6.1.4.1.6527.3.1.2.2.4.23.1.6	Integer32	read-only	tmnxDS1PortDbGain only applies to a ds1 port configured with a 'long' buildout. tmnxDS1PortDbGain shows the number of decibels the received signal is increased to compensate for loss.
I32 tmnxDS3ChannelBitErrorInsertionRate	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.10	Integer32	read-create	tmnxDS3ChannelBitErrorInsertionRate is used to insert bit errors for a BERT test. The number of error corresponds to 10^(-rate). A rate of 7 will cause an error rate of 10^(-7), or 1 error in every 10 million bits transmitted. If the value is set to 0, it disables the insertion of bit errors into the BERT. Change in this value while the test is running is accepted but does not take effect until the test gets restarted.
I32 tmnxObjectAppPoolSize	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.8	Integer32	read-create	Size in percentage of buffer space. The value '-1' implies that the pool size should be computed as per fair weighing between all other pools.
I32 tmnxObjectAppResvCbs	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.6	Integer32	read-create	The percentage of pool size reserved for CBS. The value '-1' implies that the reserved CBS should be computed as the sum of the CBS requested by the entities using this pool if the application point is 'network'. For 'access' application points the value '-1' means a default of 30%.
I32 tmnxPortEtherEgressRate	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.11	Integer32	read-write	The tmnxPortEtherEgressRate variable specifies the maximum egress bandwidth (in kilobits per second) that the Ethernet interface can generate. A value of -1 means that the limit is the actual physical limit. If the provisioned sub-rate bandwidth is larger than the actual physical bandwidth of the interface, the latter applies.
I32 tmnxPortEtherIngressRate	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.14	Integer32	read-write	The tmnxPortEtherIngressRate variable specifies the maximum ingress bandwidth (in mega-bits per second) that the Ethernet interface can receive. A value of -1 means that the limit is the actual physical limit. If the provisioned sub-rate bandwidth is larger than the actual physical bandwidth of the interface, the latter applies.
IpAddress (1)
IP tmnxSonetApsNeighborAddr	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.11	IpAddress	read-write	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
MacAddress (2)
MAC tmnxPortHwMacAddress	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.10	MacAddress	read-only	The interface's hardware or system assigned MAC address at its protocol sub-layer. When tmnxPortUserAssignedMac has a value of 'true', the value of tmnxPortMacAddress is used instead of tmnxPortHwMacAddress. In the case of a pre-provisioned port that is not yet physically in the system, the MAC address may not be known. In this case a MAC address of all zeros is returned.
MAC tmnxPortMacAddress	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.9	MacAddress	read-write	When tmnxPortUserAssignedMac has a value of 'true', tmnxPortMacAddress has the value that has been explicitly assigned by a SNMP SET request. When tmnxPortUserAssignedMac has a value of 'false', tmnxPortMacAddress returns the same value as tmnxPortMacAddress, the hardware or system assigned MAC address. When tmnxPortMacAddress is modified by a SET request, the agent sets tmnxPortUserAssignedMac to 'true'. Setting tmnxPortMacAddress to all zeros causes the agent to revert to using the default tmnxPortHwMacAddress and also to return tmnxPortUserAssignedMac as 'false'.
OCTET STRING (7)
OCT tmnxBundleMlpppEndpointID	1.3.6.1.4.1.6527.3.1.2.2.4.26.1.1	OCTET STRING	read-create	tmnxBundleMlpppEndpointID indentifies the Endpoint Discriminator identifier value within the specified tmnxBundleMlpppEndpointIDClass. The object tmnxPortAdminStatus must be set to 'outOfService' to change this value.
OCT tmnxPortOpticalCompliance	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.55	OCTET STRING	read-only	tmnxPortOpticalCompliance is applicable only when the tmnxPortSFPEquipped is set to 'true'. The value of tmnxPortOpticalCompliance indicates the 8 bytes of optical compliance bits stored in SFP and XFP eeproms.
OCT tmnxSonetApsAuthKey	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.10	OCTET STRING	read-write	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
OCT tmnxSonetJ0String	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.19	OCTET STRING	read-write	The tmnxSonetJ0String is used with the tmnxSonetSectionTraceMode variable to determine the contents of the j0 byte in the SONET Section Header. If the tmnxSonetSectionTraceMode is increment-z0, this object is ignored. If the mode is byte, then the first octet of this object is used for the J0 byte. If the mode is string, then the 16 bytes in this object are used for the J0 byte. If set to less than 16 bytes it, will be padded out to 16 with zeros. The default value is 0x01 and 15 NULLs
OCT tmnxSonetMonJ0String	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.21	OCTET STRING	read-only	The tmnxSonetMonJ0String variable reports the contents of the j0 byte in the SONET Section Header.
OCT tmnxSonetPathJ1String	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.6	OCTET STRING	read-create	The tmnxSonetPathJ1String variable is used to configure the sonet path trace string to be sent in the J1 Path Overhead bytes. The bytes must be printable ASCII. If the string is less than 62 bytes, it will be padded with NULLs. For SONET framing, an additional CR (0x0D) / LF (0x0A) pair will be added by the driver. For SDH framing only 16 bytes are sent in the J1 bytes. The driver will set the MSB of the first byte, and put the first 15 bytes of the user configured string as the following bytes. The driver will set the CRC-7 of the 16 bytes into the other 7 bits of the first byte. The default value is `Alcatel 7x50 SR`. Setting a 1-byte long string containing 0xFF will restore the default. Setting the string 'zeros' will send all-zeros (ASCII NULL characters without CR/LF or CRC-7)in the J1 bytes.
OCT tmnxSonetPathMonJ1String	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.15	OCTET STRING	read-only	The tmnxSonetPathJ1String variable reports the sonet path trace string received in the J1 Path Overhead bytes.
RowPointer (1)
NUM tmnxPortLastAlarmEvent	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.43	RowPointer	read-only	The value of tmnxPortLastAlarmEvent is an object identifier whose object name and instance values point to the row entry in the ALARM-MIB that contains the most recent alarm event associated with this port. If the tmnxPortAlarmState has a value of 'alarmCleared', the most recent alarm event will be in the nlmAlarmClearedTable. If it has a value of 'alarmActive', the entry pointed to is in the nlmAlarmActiveTable. If the value of tmnxPortLastAlarmEvent is '0.0', then either there have not been any alarm events associated with this chassis since the system was last booted, or the last alarm event has aged out and its entry is no longer available in the ALARM-MIB tables.
RowStatus (8)
ROW tmnxBundleMemberRowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.15.1.1	RowStatus	read-create	tmnxBundleMemberRowStatus controls the creation and deletion of row entries in the tmnxBundleMemberTable. tmnxPortPortID identifies the port to be associated with the bundle. A bundle entry with tmnxBundleBundleID has to exist in the tmnxBundleTable before creating an entry in this table.
ROW tmnxBundleRowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.2	RowStatus	read-create	tmnxBundleRowStatus controls the creation and deletion of row entries in the tmnxBundleTable. The manager has to first calculate the tmnxBundleBundleID based on the TiMOS encoding.
ROW tmnxDS0ChanGroupRowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.1	RowStatus	read-create	tmnxDS0ChanGroupRowStatus controls the creation and deletion of row entries in the tmnxDS0ChanGroupTable. The tmnxPortPortID for a channel group includes a group ID in the lower bits. The manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme.
ROW tmnxDS1RowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.1	RowStatus	read-create	tmnxDS1RowStatus controls the creation and deletion of row entries in the tmnxDS1Table. For row creation, the manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme.
ROW tmnxDS3ChannelRowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.1	RowStatus	read-create	tmnxDS3ChannelRowStatus controls the creation and deletion of row entries in the tmnxDS3ChannelTable. For row creation, the manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme.
ROW tmnxObjectAppPoolRowStatus	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.5	RowStatus	read-create	The object tmnxObjectAppPoolRowStatus is used to create or remove a pool application to the object.
ROW tmnxPortSchedOverrideRowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.1	RowStatus	read-create	The value of tmnxPortSchedOverrideRowStatus is used for the creation and deletion of port-scheduler overrides. When tmnxPortEgrPortSchedPlcy of the tmnxPortEntry indexed by the same indices of this table is an empty string, creation will fail.
ROW tmnxSonetPathRowStatus	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.1	RowStatus	read-create	tmnxSonetPathRowStatus controls the creation and deletion of row entries in the tmnxSonetPathTable. The tmnxPortPortID for a sonet port includes a sonet path number in the lower bits. If the sonet path number is zero, '0', it represents a single (clear) sonet path on the port that uses the full bandwidth of the sonet port. Entries in this table that have the sonet path number part of their tmnxPortPortID index value set to zero cannot be created and deleted via SNMP SET operations. They are created by the SNMP agent when the corresponding entry in the tmnxSonetTable is created. Entries with non-zero sonet path numbers can be created and deleted via SNMP SET operations. When a row is created in the tmnxSonetPathTable, the agent also creates a row with the same index values in the tmnxPortTable. In order to delete an entry, tmnxPortAdminStatus must first be set to 'outOfService'. When the tmnxSonetPathEntry is deleted, the agent also deletes the corresponding row in the tmnxPortTable for this sonet path port.
TFCName (1)
TFC tmnxPortFCStatsIndex	1.3.6.1.4.1.6527.3.1.2.2.4.9.1.1	TFCName	not-accessible	The forwarding class associated with these stats on this network port.
TimeInterval (4)
NUM tmnxSonetApsAdvertiseInterval	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.12	TimeInterval	read-write	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
NUM tmnxSonetApsAdvertiseTimeLeft	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.13	TimeInterval	read-only	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
NUM tmnxSonetApsHoldTime	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.14	TimeInterval	read-write	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
NUM tmnxSonetApsHoldTimeLeft	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.15	TimeInterval	read-only	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
TimeStamp (12)
TIM tmnxBundleLastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.15	TimeStamp	read-only	The tmnxBundleLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxBundleEntry row for this channel group.
TIM tmnxDS0ChanGroupLastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.7	TimeStamp	read-only	The tmnxDS0ChanGroupLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS0ChanGroupEntry row for this channel group.
TIM tmnxDS1LastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.12	TimeStamp	read-only	The tmnxDS1LastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS1Entry row for this channel.
TIM tmnxDS1PortLastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.23.1.2	TimeStamp	read-only	The tmnxDS1PortLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS1PortEntry row for this port.
TIM tmnxDS3ChannelLastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.27	TimeStamp	read-only	The tmnxDS3ChannelLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS3ChannelEntry row for this port.
TIM tmnxDS3LastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.10.1.2	TimeStamp	read-only	The tmnxDS3LastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS3Entry row for this port.
TIM tmnxPortLastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.2	TimeStamp	read-only	The tmnxPortLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxPortEntry row for this port.
TIM tmnxPortLastClearedTime	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.58	TimeStamp	read-only	The value of tmnxPortLastClearedTime indicates the sysUpTime when the counters in the IF-MIB:ifTable were last cleared.
TIM tmnxPortLastStateChanged	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.48	TimeStamp	read-only	The tmnxPortLastStateChanged variable contains the value of the sysUpTime the last time the operational status of the port changed state.
TIM tmnxPortSchedOverrideLastChanged	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.3	TimeStamp	read-only	The value of tmnxPortSchedOverrideLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row.
TIM tmnxPortTableLastChange	1.3.6.1.4.1.6527.3.1.2.2.4.1	TimeStamp	read-only	The value of sysUpTime when the tmnxPortTable was last changed.
TIM tmnxSonetPathLastChangeTime	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.2	TimeStamp	read-only	The tmnxSonetPathLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxSonetPathEntry row for this sonet path.
TItemDescription (2)
TIT tmnxPortConnectTypeDescription	1.3.6.1.4.1.6527.3.1.2.2.4.8.1.3	TItemDescription	read-only	A detailed description of this Alcatel 7x50 SR series port connector model.
TIT tmnxPortTypeDescription	1.3.6.1.4.1.6527.3.1.2.2.4.7.1.3	TItemDescription	read-only	A detailed description of this Alcatel 7x50 SR series port model.
TItemLongDescription (1)
TIT tmnxPortDescription	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.5	TItemLongDescription	read-write	A textual string containing user supplied information about the interface.
TMlpppQoSProfileId (2)
TML tmnxBundleMlpppEgrQoSProfId	1.3.6.1.4.1.6527.3.1.2.2.4.26.1.5	TMlpppQoSProfileId	read-create	tmnxBundleMlpppEgrQoSProfId specifies egress QoS profile to be used for the outgoing traffic over this MLPPP bundle. The value of tmnxBundleMlpppEgrQoSProfId may be modified only when tmnxBundleNumLinks is zero. The value of tmnxBundleMlpppEgrQoSProfId of 0 indicates a default profile is used as applicable to a given H/W and the configured value of tmnxBundleMlpppClassCount.
TML tmnxBundleMlpppIngQoSProfId	1.3.6.1.4.1.6527.3.1.2.2.4.26.1.4	TMlpppQoSProfileId	read-create	tmnxBundleMlpppIngQoSProfId specifies ingress QoS profile to be used for the incoming traffic over this MLPPP bundle. The value of tmnxBundleMlpppIngQoSProfId may be modified only when the value of tmnxBundleNumLinks is 0. The value of tmnxBundleMlpppIngQoSProfId of 0 indicates a default QoS profile is used as applicable to a given H/W and the configured value of tmnxBundleMlpppClassCount.
TmnxActionType (2)
TMN tmnxDS1InsertSingleBitError	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.20	TmnxActionType	read-create	tmnxDS1InsertSingleBitError is used to insert a single bit error for a BERT test.
TMN tmnxPortClearAlarms	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.44	TmnxActionType	read-write	Setting this action variable causes all the alarms associated with this port to be moved from the current alarm log to the history alarm log. Primarily meant for use in development. This object will most likely be removed from the MIB before product release.
TmnxAlarmState (1)
TMN tmnxPortAlarmState	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.42	TmnxAlarmState	read-only	The value of tmnxPortAlarmState indicates the current alarm state for this port.
TmnxBundleID (6)
TMN tmnxBPGrpAssocActiveBundleID	1.3.6.1.4.1.6527.3.1.2.2.4.25.1.3	TmnxBundleID	read-only	tmnxBPGrpAssocActiveBundleID identifies the bundle that is considered the active bundle. This bundle contains the members that are part of the active aps port. A value of zero is given if no bundle is considered active.
TMN tmnxBPGrpAssocProtectBundleID	1.3.6.1.4.1.6527.3.1.2.2.4.25.1.2	TmnxBundleID	read-only	tmnxBPGrpAssocProtectBundleID identifies the protection bundle. A value of zero is given if no protection bundle is associated with the given tmnxBundleBundleID.
TMN tmnxBPGrpAssocWorkingBundleID	1.3.6.1.4.1.6527.3.1.2.2.4.25.1.1	TmnxBundleID	read-only	tmnxBPGrpAssocWorkingBundleID identifies the working bundle. A value of zero is given if no working bundle is associated with the given tmnxBundleBundleID.
TMN tmnxBundleBundleID	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.1	TmnxBundleID	not-accessible	tmnxBundleBundleID identifies this multilink bundle. The value of this object is calculated using the TiMOS encoding scheme described in TmnxBundleID. tmnxBundleBundleID is used as an index into the ifTable and the tmnxPortTable to access an entry corresponding to this entry.
TMN tmnxBundleParentBundle	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.22	TmnxBundleID	read-create	tmnxBundleParentBundle specifies the parent to which this bundle belongs. A row for the given non zero walue of tmnxBundleParentBundle must exist for this row to be successfully created. If a bundle has no parent, its value is zero. tmnxBundleParentBundle can only be set at row creation.
TMN tmnxPortNotifyBundleId	1.3.6.1.4.1.6527.3.1.2.2.7.7	TmnxBundleID	accessible-for-notify	Used by tmnx bundle Notifications, the value indicates the bundle associated with the alarm.
TmnxDs0ChannelList (1)
TMN tmnxDS0ChanGroupTimeSlots	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.2	TmnxDs0ChannelList	read-create	tmnxDS0ChanGroupTimeSlots is a bitmap which is used to add/remove DS0 timeslots from a channel group. The description for TmnxDs0ChannelList contains details of the bitmap organization. When a channel group is created on unframed DS1/E1, all timeslots as applicable to a given speed are auto-allocated and cannot be changed. When a channel group is created on a framed DS1/E1 or existing channel group's encapsulation is changed from ATM, the default of no timeslots is auto-assigned to the group. When a channel group on a framed DS1/E1 is configured for ATM encapsulation, the ATM defaults of 0x00FFFFFF (DS1) and 0XFFFEFFFE (E1) are auto-assigned and cannot be changed.
TmnxDS1Loopback (1)
TMN tmnxDS1Loopback	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.5	TmnxDS1Loopback	read-create	tmnxDS1Loopback is used to put the channel into a loopback mode. The value of tmnxPortAdminStatus should be set to 'outOfService' in order for the loopback to be enabled. A 'line' loopback loops frames received on this port back to the remote system. A 'internal' loopback loops frames from the local system back at the framer. A 'fdlAnsi' requests loopback of type FDL ANSI T1.403. This is valid with tmnxDS1Framing set to 'esf' framing. A 'fdlBellcore' requests loopback of type FDL Bellcore TR-TSY-000312. This is valid with tmnxDS1Framing set to 'esf'. A 'inbandAnsi' requests loopback of type inband ANSI T1.403. This is valid with tmnxDS1Framing set to 'sf'.
TmnxDS3Loopback (1)
TMN tmnxDS3ChannelLoopback	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.9	TmnxDS3Loopback	read-create	tmnxDS3ChannelLoopback is used to put the channel into a loopback mode. The value of tmnxPortAdminStatus should be set to 'outOfService' in order for the loopback to be enabled. A 'line' loopback loops frames received on this port back to the remote system. A 'internal' loopback loops the frames from the local system back at the framer. When the value is set to 'remote', a signal is sent to the remote system to provide a line loopback.
TmnxDSXBertOperStatus (2)
TMN tmnxDS1BERTOperStatus	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.14	TmnxDSXBertOperStatus	read-only	tmnxDS1BERTOperStatus indicates the status of the BERT test as specified by TmnxDSXBertOperStatus.
TMN tmnxDS3ChannelBERTOperStatus	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.31	TmnxDSXBertOperStatus	read-only	tmnxDS3ChannelBERTOperStatus indicates the status of the BERT test as specified by TmnxDSXBertOperStatus.
TmnxDSXBertPattern (2)
TMN tmnxDS1BERTPattern	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.8	TmnxDSXBertPattern	read-create	tmnxDS1BERTPattern object indicates the pattern used for the Bit Error Rate Test (BERT). The value of tmnxDS1BERTDuration indicates the duration of the test. Setting the value to 'none' terminates the test.
TMN tmnxDS3ChannelBERTPattern	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.11	TmnxDSXBertPattern	read-create	tmnxDS3ChannelBERTPattern indicates the pattern used for the Bit Error Rate Test (BERT). The value of tmnxDS3ChannelBERTDuration indicates the duration of the test. Setting the value of this object to 'none' terminates the test.
TmnxDSXClockSource (2)
TMN tmnxDS1ClockSource	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.13	TmnxDSXClockSource	read-create	tmnxDS1ClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed'), or from a clock recovered from the line's receive data stream ('loopTimed'), or recovered adaptively from the rate at which the data that is received and not from the physical layer ('adaptive'), or recovered from the differential timestamp in the RTP header ('differential').
TMN tmnxDS3ChannelClockSource	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.4	TmnxDSXClockSource	read-create	tmnxDS3ChannelClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed'), or from a clock recovered from the line's receive data stream ('loopTimed').
TmnxDSXClockSyncState (2)
TMN tmnxDS1ClockSyncState	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.22	TmnxDSXClockSyncState	read-only	The value of tmnxDS1ClockSyncState indicates the current clock synchronization state if tmnxDS1ClockSource is 'adaptive' or 'differential'.
TMN tmnxDS3ChannelClockSyncState	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.38	TmnxDSXClockSyncState	read-only	The value of tmnxDS3ChannelClockSyncState indicates the current clock synchronization state if tmnxDS3ChannelClockSource is 'adaptive' or 'differential'.
TmnxDSXIdleCycleFlags (3)
TMN tmnxDS0ChanGroupIdleCycleFlags	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.8	TmnxDSXIdleCycleFlags	read-create	tmnxDS0ChanGroupIdleCycleFlags configures the value that the channel group transmits during idle cycle. The default value applies to HDLC channels only. For ATM and CEM channels the object does not really apply so a default value of 'none' is used and cannot be changed.
TMN tmnxDS1IdleCycleFlags	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.4	TmnxDSXIdleCycleFlags	read-create	tmnxDS1IdleCycleFlags configures the value that the DS1 channel transmits during idle cycle.
TMN tmnxDS3ChannelIdleCycleFlags	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.8	TmnxDSXIdleCycleFlags	read-create	tmnxDS3ChannelIdleCycleFlags configures the value that the DS3 port transmits during idle cycle. The default value applies to HDLC channels only. For ATM channels the object does not really apply so a default value of 'none' is used and cannot be changed.
TmnxDSXIdleFillType (2)
TMN tmnxDS0ChanGroupPayloadFillType	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.12	TmnxDSXIdleFillType	read-create	The value of tmnxDS0ChanGroupPayloadFillType specifies the type of idle payload fill to be sent when the CEM channel group experiences an underrun. If the type is set to 'userDefinedPattern' then the value of tmnxDS0ChanGroupPayloadPattern is used to define the payload pattern. The default value depends on the encap type of the channel group: For CEM encap - 'allOnes' For all other encaps - 'notApplicable' For a ds1-unframed and e1-unframed CEM encap DS0 channel group the only supported value is 'allOnes'. For non-CEM encap channel groups the value cannot be changed.
TMN tmnxDS0ChanGroupSignalFillType	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.14	TmnxDSXIdleFillType	read-create	The value of tmnxDS0ChanGroupSignalFillType specifies the type of idle signal fill to be sent when the CAS CEM channel group experiences an underrun. If the type is set to 'userDefinedPattern' then the value of tmnxDS0ChanGroupSignalPattern is used to define the signal pattern. The default value depends on the encap of the DS0 channel group and the signal-mode of the DS1/E1: For CEM encap on DS1/E1 with CAS signal mode - 'allOnes' For all other encaps or non-CAS CEM DS1/E1 - 'notApplicable' For CEM channel groups on DS1/E1 with no CAS signalling and non-CEM encap channel groups the value cannot be changed.
TmnxDSXReportAlarm (4)
TMN tmnxDS1ReportAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.10	TmnxDSXReportAlarm	read-create	The value of tmnxDS1ReportAlarm determines when and if to generate notifications for this channel: ais - Reports alarm indication signal errors. ais alarms are issued by default. los - Reports loss of signal errors. los alarms are issued by default. oof - Reports out-of-frame errors. oof alarms are not issued by default. rai - Reports resource availability indicator events. rai alarms are not issued by default. looped - Reports if the far end has forced the near end to loopback. looped alarms are not issued by default. berSd - Reports DS1/E1/J1 signal degradation bit errors. berSd alarms are not issued by default. berSf - Reports DS1/E1/J1 signal failure bit errors. berSf alarms are not issued by default
TMN tmnxDS1ReportAlarmStatus	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.11	TmnxDSXReportAlarm	read-only	The value of tmnxDS1ReportAlarmStatus indicates the current alarms on this channel.
TMN tmnxDS3ChannelReportAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.25	TmnxDSXReportAlarm	read-create	The value of tmnxDS3ChannelReportAlarm determines when and if to generate notifications for this channel: ais - Reports alarm indication signal errors. ais alarms are issued by default. los - Reports loss of signal errors. los alarms are issued by default. oof - Reports out-of-frame errors. oof alarms are not issued by default. rai - Reports resource availability indicator events. rai alarms are not issued by default. looped - Reports if the far end has forced the near end to loopback. looped alarms are not issued by default. berSd - Reports DS3/E3 signal degradation bit errors. berSd alarms are not issued by default. berSf - Reports DS3/E3 signal failure bit errors. berSf alarms are not issued by default
TMN tmnxDS3ChannelReportAlarmStatus	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.26	TmnxDSXReportAlarm	read-only	The value of tmnxDS3ChannelReportAlarmStatus indicates the current alarms on this port.
TmnxImaGrpClockModes (2)
TMN tmnxBundleImaGrpFeClockMode	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.27	TmnxImaGrpClockModes	read-create	tmnxBundleImaGrpFeClockMode specifies far-end transmit clock mode.
TMN tmnxBundleImaGrpNeClockMode	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.26	TmnxImaGrpClockModes	read-create	tmnxBundleImaGrpNeClockMode specifies near-end transmit clock mode.
TmnxImaGrpFailState (1)
TMN tmnxBundleImaGrpSmFailState	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.10	TmnxImaGrpFailState	read-only	tmnxBundleImaGrpSmFailState specifies the current state of the IMA Group.
TmnxImaGrpState (2)
TMN tmnxBundleImaGrpSmFeState	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.9	TmnxImaGrpState	read-only	tmnxBundleImaGrpSmFeState specifies the current state of the IMA Group for the far-end.
TMN tmnxBundleImaGrpSmNeState	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.8	TmnxImaGrpState	read-only	tmnxBundleImaGrpSmNeState specifies the current state of the IMA Group for the near-end.
TmnxImaGrpVersion (1)
TMN tmnxBundleImaGrpVersion	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.28	TmnxImaGrpVersion	read-create	tmnxBundleImaGrpVersion specifies the IMA Version for this group.
TmnxImaLnkFailState (2)
TMN tmnxBundleMemberImaFeRxFailState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.6	TmnxImaLnkFailState	read-only	tmnxBundleMemberImaFeRxFailState indicates the IMA link failure reason for the far-end.
TMN tmnxBundleMemberImaNeRxFailState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.5	TmnxImaLnkFailState	read-only	tmnxBundleMemberImaNeRxFailState indicates the IMA link failure reason for the near-end.
TmnxImaLnkState (4)
TMN tmnxBundleMemberImaFeRxState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.4	TmnxImaLnkState	read-only	tmnxBundleMemberImaFeRxState indicates the state of far-end receive IMA link.
TMN tmnxBundleMemberImaFeTxState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.3	TmnxImaLnkState	read-only	tmnxBundleMemberImaFeTxState indicates the state of far-end transmit IMA link.
TMN tmnxBundleMemberImaNeRxState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.2	TmnxImaLnkState	read-only	tmnxBundleMemberImaNeRxState indicates the state of near-end receive IMA link.
TMN tmnxBundleMemberImaNeTxState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.1	TmnxImaLnkState	read-only	tmnxBundleMemberImaNeTxState indicates the state of near-end transmit IMA link.
TmnxImaTestState (2)
TMN tmnxBundleImaGrpTestState	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.30	TmnxImaTestState	read-create	tmnxBundleImaGrpTestState specifies the current state of the test pattern procedure. A value of 'disabled' specifies that the group is currently not running. A value of 'operating' enables the test pattern procedure. The test pattern procedure continues until it is 'disabled'.
TMN tmnxBundleMemberImaRxTestState	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.27	TmnxImaTestState	read-only	tmnxBundleMemberImaRxTestState indicates the current state of the test pattern on this link.
TmnxMcMlpppClassIndex (1)
TMN tmnxMcMlpppClassIndex	1.3.6.1.4.1.6527.3.1.2.2.12.4.1.1	TmnxMcMlpppClassIndex	not-accessible	tmnxMcMlpppClassIndex serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxBundleBundleID, it uniquely identifies a class of a multiclass MLPPP bundle in the managed system.
TmnxMDAChanType (4)
TMN tmnxPortChanType	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.53	TmnxMDAChanType	read-only	tmnxPortChanType is applicable only when the 'isSonet' and/or 'isTDM' bits in ALCATEL-IND1-TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. It indicates the type of the channel. For ports on Ethernet MDA's, the value of this object will be 'unknown'.
TMN tmnxSonetGroupChildType	1.3.6.1.4.1.6527.3.1.2.2.4.18.1.3	TmnxMDAChanType	read-write	tmnxSonetGroupChildType is used to configure the type of the children of this group. Based on the value of this object, entries of a certain channel type can be created in the tmnxSonetPathTable. For example, if the value of this object is set to 'sonetVt15', then 28 entries of type 'sonetVt15' can be created in the tmnxSonetPathTable.
TMN tmnxSonetGroupType	1.3.6.1.4.1.6527.3.1.2.2.4.18.1.1	TmnxMDAChanType	read-only	tmnxSonetGroupType indicates the sonet group type of this entry. For STS-3/STM-1 channelization, the value of this object will be 'sdhTug3'.
TMN tmnxSonetPathChildType	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.17	TmnxMDAChanType	read-create	tmnxSonetPathChildType is used to configure the type of this path. Some typical default values are: pdhDs3 for STS-1 paths pdhE3 for TU3 paths pdhE1 for VT2 paths pdhDs1 for VT15 paths Examples of valid child path types are sonetSts3, sdhTug3, pdhDs3, pdhE3, sonetVt15, sonetVt2, pdhDs1 and pdhE1.
TmnxMlpppEndpointIdClass (1)
NUM tmnxBundleMlpppEndpointIDClass	1.3.6.1.4.1.6527.3.1.2.2.4.26.1.2	TmnxMlpppEndpointIdClass	read-create	tmnxBundleMlpppEndpointIDClass specifies the Link Control Protocol Endpoint Descriminator Class field type of the tmnxBundleMlpppEndpointID. The object tmnxPortAdminStatus must be set to 'outOfService' to change this value. Bundle DEFVAL Physical MLPPP Bundle ieee802dot1GlobalMacAddress (3) MLPPP Bundle Protection Group ipAddress (2)
TmnxOperState (1)
TMN tmnxCiscoHDLCOperState	1.3.6.1.4.1.6527.3.1.2.2.4.20.1.4	TmnxOperState	read-only	The value of tmnxCiscoHDLCOperState indicates the operational status of the Cisco HDLC protocol for this port.
TmnxPortAdminStatus (2)
TMN tmnxPortAdminStatus	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.37	TmnxPortAdminStatus	read-write	The desired administrative status of this port.
TMN tmnxSonetApsAdminStatus	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.8	TmnxPortAdminStatus	read-write	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
TmnxPortClass (1)
TMN tmnxPortClass	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.4	TmnxPortClass	read-only	The class of port or optical pack installed. This can be derived from tmnxPortType.
TmnxPortConnectorType (2)
TMN tmnxPortConnectorType	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.17	TmnxPortConnectorType	read-only	The type of connector installed on this port.
TMN tmnxPortConnectTypeIndex	1.3.6.1.4.1.6527.3.1.2.2.4.8.1.1	TmnxPortConnectorType	not-accessible	The unique index value which identifies this type of Alcatel 7x50 SR series port connector model.
TmnxPortEtherReportStatus (2)
TMN tmnxPortEtherReportAlarm	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.15	TmnxPortEtherReportStatus	read-write	The value of tmnxPortEtherReportAlarm determines when and if to generate tmnxEqPortEtherAlarm and tmnxEqPortEtherAlarmClear.
TMN tmnxPortEtherReportAlarmStatus	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.16	TmnxPortEtherReportStatus	read-only	The value of tmnxPortEtherReportAlarmStatus indicates the alarms on this port.
TmnxPortEtherReportValue (1)
TMN tmnxPortNotifyEtherAlarmReason	1.3.6.1.4.1.6527.3.1.2.2.7.8	TmnxPortEtherReportValue	accessible-for-notify	Used by tmnx ethernet Port Notifications, the value of tmnxPortNotifyEtherAlarmReason indicates the reason a ethernet port alarm has been raised.
TmnxPortID (12)
TMN tmnxBundleImaGrpRxRefLnk	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.7	TmnxPortID	read-only	tmnxBundleImaGrpRxRefLnk specifies the IMA bundle member that was detected to be the receive timing reference link. If no member has been detected as the reference link a value of zero is returned.
TMN tmnxBundleImaGrpTestMember	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.31	TmnxPortID	read-create	tmnxBundleImaGrpTestMember specifies a member link to be used for the test pattern procedure. A value of zero indicates that no member link has been selected. When tmnxBundleImaGrpTestState does not have the value 'disabled', an attempt to set this object will be rejected with an inconsistentValue error.
TMN tmnxBundleImaGrpTxRefLnk	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.6	TmnxPortID	read-only	tmnxBundleImaGrpTxRefLnk specifies the IMA bundle member that was selected to be the transmit timing reference link. If no member has been selected as the reference link a value of zero is returned.
TMN tmnxBundlePrimaryMemberPortID	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.19	TmnxPortID	read-only	tmnxBundlePrimaryMemberPortID indicates the TmnxPortID of the primary member of this bundle. The value of this object will be zero if there are no members configured in this bundle.
TMN tmnxChannelPortID	1.3.6.1.4.1.6527.3.1.2.2.4.16.1.2	TmnxPortID	read-only	tmnxChannelPortID contains the port ID of the channel. This value is used to identify the entry for this channel in the ifTable or the tmnxPortTable.
TMN tmnxDS1ClockMasterPortId	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.23	TmnxPortID	read-only	The value of tmnxDS1ClockMasterPortId indicates the current clock synchronization master port id if tmnxDS1ClockSource is 'adaptive' or 'differential'.
TMN tmnxDS3ChannelClockMasterPortId	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.39	TmnxPortID	read-only	The value of tmnxDS3ChannelClockMasterPortId indicates the current clock synchronization master port id if tmnxDS3ChannelClockSource is 'adaptive' or 'differential'.
TMN tmnxObjectId	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.2	TmnxPortID	not-accessible	tmnxObjectId is used to identify the specific object. If tmnxObjectType is 'mda', then the tmnxObjectId is encoded as a physical port with the port being '0'. For all other types the encoding is done as per the description of TmnxPortID.
TMN tmnxPortNotifyPortId	1.3.6.1.4.1.6527.3.1.2.2.7.1	TmnxPortID	accessible-for-notify	Used by tmnx port Notifications, the OID indicates the port or sonet path associated with the alarm.
TMN tmnxPortParentPortID	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.54	TmnxPortID	read-only	tmnxPortParentPortID is applicable only when the 'isSonet' and/or 'isTDM' bits in ALCATEL-IND1-TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. For SONET or TDM channel, it indicates the port ID of its parent channel or port.
TMN tmnxPortPortID	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.1	TmnxPortID	not-accessible	tmnxPortPortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table.
TMN tmnxSonetGroupParentPortID	1.3.6.1.4.1.6527.3.1.2.2.4.18.1.2	TmnxPortID	read-only	tmnxSonetGroupParentPortID indicates the TmnxPortID of the parent of this group.
TmnxPortOperStatus (2)
TMN tmnxPortOperStatus	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.38	TmnxPortOperStatus	read-only	The current operational status of this port.
TMN tmnxSonetApsOperStatus	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.9	TmnxPortOperStatus	read-only	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
TmnxPortState (2)
TMN tmnxPortPrevState	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.40	TmnxPortState	read-only	The tmnxPortPrevState indicates the state level that the port transitioned from into the current tmnxPortState level.
TMN tmnxPortState	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.39	TmnxPortState	read-only	The state level of this port. A value of 'none' indicates the port is either in its initial creation state or is just about to be deleted. A value of 'ghost' represents a port that is not physically present. This state may represent a pre-provisioned port. A value of 'linkDown' represents a port that is physically present but does not have a link. The 'linkUp' state represents a port that is physically present and has physical link present. A port in 'up' state is ready to pass some kinds of traffic. The tmnxPortUpProtocols variable indicates the actual type(s) of traffic can be passed on this 'up' link.
TmnxPortType (2)
TMN tmnxPortType	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.3	TmnxPortType	read-only	The type of port or optical pack installed.
TMN tmnxPortTypeIndex	1.3.6.1.4.1.6527.3.1.2.2.4.7.1.1	TmnxPortType	not-accessible	The unique index value which identifies this type of Alcatel 7x50 SR series port model.
TNamedItem (2)
TNA tmnxObjectAppPool	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.4	TNamedItem	not-accessible	tmnxObjectAppPool specifies the name of the pool to be used/created.
TNA tmnxObjectAppSlopePolicy	1.3.6.1.4.1.6527.3.1.2.2.10.2.1.7	TNamedItem	read-create	tmnxObjectAppSlopePolicy specifies the slope policy being used for this pool. The Slope policies define the nature of the RED Slopes for the high and the low priority traffic.
TNamedItemOrEmpty (12)
TNA tmnxPortAlias	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.7	TNamedItemOrEmpty	read-write	This object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. On the first instantiation of an interface, the value of tmnxPortAlias associated with that interface is the zero-length string. As and when a value is written into an instance of tmnxPortAlias through a network management set operation, then the agent must retain the supplied value in the tmnxPortAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system.
TNA tmnxPortConnectTypeName	1.3.6.1.4.1.6527.3.1.2.2.4.8.1.2	TNamedItemOrEmpty	read-only	The administrative name that identifies this type of Alcatel 7x50 SR series port connector model. This name string may be used in CLI commands to specify a particular port connector model type.
TNA tmnxPortEgrNamedPoolPlcy	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.61	TNamedItemOrEmpty	read-write	The value of tmnxPortEgrNamedPoolPlcy specifies a named pool policy associated with an port egress context. The policy governs the way named pools are created at the port level.
TNA tmnxPortEgrPortSchedPlcy	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.57	TNamedItemOrEmpty	read-write	The value of tmnxPortEgrPortSchedPlcy specifies the egress QoS port-scheduler policy for this port. This object must correspond to the index of a row in ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyTable.
TNA tmnxPortIngNamedPoolPlcy	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.60	TNamedItemOrEmpty	read-write	The value of tmnxPortIngNamedPoolPlcy specifies a named pool policy associated with an port ingress context. The policy governs the way named pools are created at the port level.
TNA tmnxPortName	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.6	TNamedItemOrEmpty	read-only	The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `le0' or 'sys171-2/1.
TNA tmnxPortNetworkEgrQueues	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.50	TNamedItemOrEmpty	read-write	tmnxPortNetworkEgrQueues contains the network egress queue policy if the tmnxPortMode is network. Otherwise this object has no significance.
TNA tmnxPortSFPVendorPartNum	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.46	TNamedItemOrEmpty	read-only	The vendor part number contains ASCII characters, defining the vendor part number or product name. A value of all zero indicates that the vendor PN is unspecified.
TNA tmnxPortSFPVendorSerialNum	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.45	TNamedItemOrEmpty	read-only	tmnxPortSFPVendorSerialNum contains ASCII characters, defining the vendor serial number. A value of all zero indicates that the vendor SN is unspecified.
TNA tmnxPortTransceiverModelNumber	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.29	TNamedItemOrEmpty	read-only	Model number of the transceiver.
TNA tmnxPortTypeName	1.3.6.1.4.1.6527.3.1.2.2.4.7.1.2	TNamedItemOrEmpty	read-only	The administrative name that identifies this type of Alcatel 7x50 SR series port model. This name string may be used in CLI commands to specify a particular Port model type.
TNA tmnxSonetGroupName	1.3.6.1.4.1.6527.3.1.2.2.4.18.1.4	TNamedItemOrEmpty	read-only	tmnxSonetGroupName is the textual name for this sonet group.
TPortSchedulerCIR (8)
TPO tmnxPortSchedOverrideLvl1CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.6	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl1CIR specifies the within-cir bandwidth limit for priority level 1. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl1CIR.
TPO tmnxPortSchedOverrideLvl2CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.8	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl2CIR specifies the within-cir bandwidth limit for priority level 2. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl2CIR.
TPO tmnxPortSchedOverrideLvl3CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.10	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl3CIR specifies the within-cir bandwidth limit for priority level 3. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl3CIR.
TPO tmnxPortSchedOverrideLvl4CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.12	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl4CIR specifies the within-cir bandwidth limit for priority level 4. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl4CIR.
TPO tmnxPortSchedOverrideLvl5CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.14	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl5CIR specifies the within-cir bandwidth limit for priority level 5. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl5CIR.
TPO tmnxPortSchedOverrideLvl6CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.16	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl6CIR specifies the within-cir bandwidth limit for priority level 6. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl6CIR.
TPO tmnxPortSchedOverrideLvl7CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.18	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl7CIR specifies the within-cir bandwidth limit for priority level 7. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl7CIR.
TPO tmnxPortSchedOverrideLvl8CIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.20	TPortSchedulerCIR	read-create	The value of tmnxPortSchedOverrideLvl8CIR specifies the within-cir bandwidth limit for priority level 8. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl8CIR.
TPortSchedulerPIR (9)
TPO tmnxPortSchedOverrideLvl1PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.5	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl1PIR specifies the total bandwidth limit, PIR, for priority level 1. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl1PIR.
TPO tmnxPortSchedOverrideLvl2PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.7	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl2PIR specifies the total bandwidth limit, PIR, for priority level 2. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl2PIR.
TPO tmnxPortSchedOverrideLvl3PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.9	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl3PIR specifies the total bandwidth limit, PIR, for priority level 3. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl3PIR.
TPO tmnxPortSchedOverrideLvl4PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.11	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl4PIR specifies the total bandwidth limit, PIR, for priority level 4. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl4PIR.
TPO tmnxPortSchedOverrideLvl5PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.13	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl5PIR specifies the total bandwidth limit, PIR, for priority level 5. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl5PIR.
TPO tmnxPortSchedOverrideLvl6PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.15	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl6PIR specifies the total bandwidth limit, PIR, for priority level 6. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl6PIR.
TPO tmnxPortSchedOverrideLvl7PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.17	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl7PIR specifies the total bandwidth limit, PIR, for priority level 7. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl7PIR.
TPO tmnxPortSchedOverrideLvl8PIR	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.19	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideLvl8PIR specifies the total bandwidth limit, PIR, for priority level 8. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl8PIR.
TPO tmnxPortSchedOverrideMaxRate	1.3.6.1.4.1.6527.3.1.2.2.4.24.1.4	TPortSchedulerPIR	read-create	The value of tmnxPortSchedOverrideMaxRate specifies the explicit maximum frame based bandwidth limit. This object overrides ALCATEL-IND1-TIMETRA-QOS-MIB::tPortSchedulerPlcyMaxRate.
TQueueId (2)
TQU tmnxPortNetEgressQueueIndex	1.3.6.1.4.1.6527.3.1.2.2.12.2.1.1	TQueueId	not-accessible	tmnxPortNetEgressQueueIndex serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a network egress queue for the specified port in the managed system.
TQU tmnxPortNetIngressQueueIndex	1.3.6.1.4.1.6527.3.1.2.2.12.1.1.1	TQueueId	not-accessible	tmnxPortNetIngressQueueIndex serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a network ingress queue for the specified port in the managed system.
TruthValue (29)
T/F tmnxBundleLFI	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.20	TruthValue	read-create	tmnxBundleLFI specifies if Link Fragmentation and Interleaving is enabled on the multilink bundle. A value of 'false' indicates that Link Fragmentation and Interleaving is disabled on the multilink bundle while a value of 'true' indicates that Link Fragmentation and Interleaving is enabled on the multilink bundle. This object is only supported for tmnxBundleType value of mlppp. The value of tmnxBundleLFI may be modified only when no members are part of the bundle. This object cannot be set to true when tmnxBundleMlpppClassCount object value is set to enable Multiclass MLPPP on the bundle.
T/F tmnxBundleMemberActive	1.3.6.1.4.1.6527.3.1.2.2.4.15.1.2	TruthValue	read-only	tmnxBundleMemberActive is set to 'false' for one of reasons in tmnxBundleMemberDownReason.
T/F tmnxBundleShortSequence	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.14	TruthValue	read-create	tmnxBundleShortSequence command specifies that the MLPPP bundle should use short (12 bit) sequence numbers. Instead of the standard long (24 bits) sequence number. This object is only applicable to tmnxBundleType values of mlppp.
T/F tmnxDDMExternallyCalibrated	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.40	TruthValue	read-only	The value of tmnxDDMExternallyCalibrated indicates whether the SFP was externally calibrated (true) or internally calibrated (false).
T/F tmnxDS0ChanGroupCollectStats	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.11	TruthValue	read-create	The value of tmnxDS0ChanGroupCollectStats specifies whether or not the collection of accounting and statistical data for the network ds0 channel-group is collected. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPM will not obtain the results and write them to the billing file. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file.
T/F tmnxDS0ChanGroupScramble	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.9	TruthValue	read-create	tmnxDS0ChanGroupScramble indicates whether payload scrambling is enabled on this ATM channel. Both ends of the connection must use the same scrambling algorithm. The default value is 'true' if the tmnxPortEncapType is atmEncap for this channel, otherwise the default is 'false' and not allowed to change.
T/F tmnxDS1InRemoteLoop	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.19	TruthValue	read-only	tmnxDS1InRemoteLoop indicates whether the remote end has put this channel in remote loopback.
T/F tmnxDS1InvertData	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.6	TruthValue	read-create	Setting tmnxDS1InvertData to 'true' causes all data bits to be inverted, to guarantee ones density. It is typically used with AMI line encoding.
T/F tmnxDS1RemoteLoopRespond	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.18	TruthValue	read-create	When tmnxDS1RemoteLoopRespond has a value of 'true', the channel is enabled to respond to remote loop signals. When it has a value of 'false' the port will not respond.
T/F tmnxDS3ChannelCollectStats	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.37	TruthValue	read-create	The value of tmnxDS3ChannelCollectStats specifies whether or not the collection of accounting and statistical data for the network ds3 channel is collected. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPM will not obtain the results and write them to the billing file. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file.
T/F tmnxDS3ChannelFEACLoopRespond	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.21	TruthValue	read-create	When tmnxDS3ChannelFEACLoopRespond has a value of 'true', the channel is enabled to respond to remote loop signals. When it has a value of 'false' the port will not respond.
T/F tmnxDS3ChannelInFEACLoop	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.28	TruthValue	read-only	tmnxDS3ChannelInFEACLoop indicates whether the remote end has put this channel in FEAC(Far End Alarm Control) loopback.
T/F tmnxDS3ChannelScramble	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.35	TruthValue	read-create	When tmnxDS3ChannelScramble indicates whether scrambling is enabled on this channel. Both ends of the connection must use the same scrambling algorithm. The default value is 'true' if the tmnxPortEncapType is atmEncap for this channel and indicates ATM payload scrambling; otherwise (tmnxPortEncapType is not atmEncap) the default is 'false' and can only be changed to true if the value of tmnxDS3ChannelSubrateCSUMode is digital-link (1)
T/F tmnxL4LoadBalancing	1.3.6.1.4.1.6527.3.1.2.2.4.19.1	TruthValue	read-write	The value of tmnxL4LoadBalancing specifies whether layer 4 information, src and dst ports, should be used in the LAG and ECMP hashing algorithm. This is the global system setting that all ports will inherit. When set to 'true', src and dst ports are used in the hashing algorithm. The per port setting of tmnxPortLoadBalanceAlgorithm can override tmnxL4LoadBalancing.
T/F tmnxPortConnectTypeStatus	1.3.6.1.4.1.6527.3.1.2.2.4.8.1.4	TruthValue	read-only	When tmnxPortConnectTypeStatus has a value of 'true' it indicates that this port connector model is supported in this revision of the chassis management software. When it has a value of 'false' there is no support.
T/F tmnxPortDDMEventSuppression	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.64	TruthValue	read-write	The value of tmnxPortDDMEventSuppression specifies whether or not an inserted SFP/XFP that supports Digital Diagnostic Monitoring raises traps and events (false) or suppresses all notifications (true).
T/F tmnxPortEquipped	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.35	TruthValue	read-only	Indicates if there is an optics pack installed in this port or not.
T/F tmnxPortEtherCollectStats	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.8	TruthValue	read-write	Enable/disable the collection of accounting and statistical data for the network ethernet port. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPU will not obtain the results and write them to the billing file.
T/F tmnxPortEtherDownWhenLoopedEnabled	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.21	TruthValue	read-write	The value of tmnxPortEtherDownWhenLoopedEnabled specifies whether physical loop detection for the Ethernet port is enabled or disabled. When enabled, the port will periodically send out keep-alive PDUs with an EtherType of 0x9000. If the port receives a keep-alive that it transmitted, tmnxPortState will be set to 'linkUp' if it was previously 'up'. The port will not move back to tmnxPortState 'up' for a period of time defined by tmnxPortEtherDownWhenLoopedRetry, but will continue to periodically send out keep-alive PDUs. Every time the port receives a keep alive it sent while a loop has been detected, it will reset the time period that it will remain down as defined by tmnxPortEtherDownWhenLoopedRetry.
T/F tmnxPortEtherLacpTunnel	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.20	TruthValue	read-write	The value of tmnxPortEtherLacpTunnel specifies whether the LACP packet tunneling for the ethernet port is enabled or disabled. When tunneling is enabled, the port will not process any LACP packets but will tunnel them through instead. Also, the port cannot be added as a member to a LAG group, and vice versa.
T/F tmnxPortIsLeaf	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.52	TruthValue	read-only	tmnxPortIsLeaf is applicable only when the 'isSonet' and/or 'isTDM' bits in ALCATEL-IND1-TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. When the value of this object is 'true', it indicates that the channel is capable of passing traffic. The value of this object is 'false' for: 1. Physical ports on SONET/TDM MDA's 2. Intermediate channels on a channelized MDA 3. Leaf channels which belong to a bundle For ports on Ethernet MDA's or for LAG ports, the value of this object will be 'false'.
T/F tmnxPortLinkStatus	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.36	TruthValue	read-only	Indicates whether or not the port has a physical link.
T/F tmnxPortSFPEquipped	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.34	TruthValue	read-only	Indicates if the SFP is equipped.
T/F tmnxPortTypeStatus	1.3.6.1.4.1.6527.3.1.2.2.4.7.1.4	TruthValue	read-only	When tmnxPortTypeStatus has a value of 'true' it indicates that this port model is supported in this revision of the management software. When it has a value of 'false' there is no support.
T/F tmnxPortUserAssignedMac	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.8	TruthValue	read-only	When tmnxPortUserAssignedMac has a value of 'true', the value of tmnxPortMacAddress has been explicitly assigned by a SNMP SET request. When tmnxPortUserAssignedMac is set to 'false', tmnxPortMacAddress returns the system assigned MAC address.
T/F tmnxSonetAps	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.7	TruthValue	read-write	Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB.
T/F tmnxSonetPathCollectStats	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.12	TruthValue	read-create	Enable/disable the collection of accounting and statistical data for the network sonet path. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPU will not obtain the results and write them to the billing file.
T/F tmnxSonetPathScramble	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.4	TruthValue	read-create	If the tmnxSonetPathScramble variable is set to 'true', SONET (SDH) payload scrambling is enabled on this sonet path. Both ends of the connection must use the same scrambling algorithm. If tmnxSonetPathScramble is set to 'false', scrambling is disabled. The default value for non-ATM paths is 'false'. The default value for ATM paths is 'true' If the value of tmnxSonetPathC2Byte is set to the default for the currently configured tmnxSonetPathScramble, then changing the value of tmnxSonetPathScramble for non-ATM paths causes a change to tmnxSonetPathC2Byte to a default value for a new scrambling option. The default values are as follows: scrambled non-ATM sonet/sdh path - C2 Byte value is 0x16 unscrambled non-ATM sonet/sdh path - C2 Byte value is 0xCF
T/F tmnxSonetSingleFiber	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.24	TruthValue	read-write	tmnxSonetSingleFiber is used to enable/disable packet gathering and redirection of IP packets from a single fiber on RX port of the SONET interface and redistribute packets to other interfaces through either state routes or policy-based forwarding.
Unsigned32 (82)
U32 tmnxBundleFragmentThreshold	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.16	Unsigned32	read-create	The value of tmnxBundleFragmentThreshold specifies the maximum length of a fragment transmitted across the multilink bundle. Values supported within each bundle type are H/W dependent. The value of 0 specifies no fragmentation. Currently, the following values are supported depending upon the tmnxBundleType value: tmnxBundleType tmnxBundleFragmentThreshold values supported mlppp 0; 128 to 512 inclusive imagrp 128
U32 tmnxBundleImaGrpDiffDelayMaxObs	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.33	Unsigned32	read-only	tmnxBundleImaGrpDiffDelayMaxObs indicates the latest maximum differential delay observed between links having the least and most link propagation delay among the received links configured in this IMA group.
U32 tmnxBundleImaGrpLeastDelayLink	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.34	Unsigned32	read-only	tmnxBundleImaGrpLeastDelayLink indicates a member link which has the smallest link propagation delay. If this delay has yet to be determined or no member link has been configured, a value of zero is returned.
U32 tmnxBundleImaGrpLnkActTimer	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.1	Unsigned32	read-create	tmnxBundleImaGrpLnkActTimer specifies the Link Activation Timer used to clear an existing LIF, LODS and FRI-IMA alarm. The time specified determines how long is needed for member links to stabilize before being activated.
U32 tmnxBundleImaGrpLnkDeactTimer	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.2	Unsigned32	read-create	tmnxBundleImaGrpLnkDeactTimer specifies the Link Deactivation Timer used to raise an LIF, LODS and FRI-IMA alarm. The time specified determines how long before a member link is declared in error and is deactivated.
U32 tmnxBundleImaGrpMaxConfBw	1.3.6.1.4.1.6527.3.1.2.2.4.21.1.29	Unsigned32	read-create	tmnxBundleImaGrpMaxConfBw specifies the number of links that is used to determine the maximum configurable bandwidth that is allowed to be used for this IMA group.
U32 tmnxBundleMemberImaRelDelay	1.3.6.1.4.1.6527.3.1.2.2.4.22.1.29	Unsigned32	read-only	tmnxBundleMemberImaRelDelay indicates the latest measured delay on this member link relative to the member link with the least delay within the same IMA group
U32 tmnxBundleMemberUpTime	1.3.6.1.4.1.6527.3.1.2.2.4.15.1.4	Unsigned32	read-only	tmnxBundleMemberUpTime indicates the time since the bundle member is active as indicated by tmnxBundleMemberActive.
U32 tmnxBundleMinimumLinks	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.4	Unsigned32	read-create	tmnxBundleMinimumLinks is the minimum number of links that must be active for a bundle to be active. If the number of links drop below the given minimum then the multilink bundle will transition to an operation down state.
U32 tmnxBundleMRRU	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.7	Unsigned32	read-create	tmnxBundleMRRU is used to configure the Max Received Reconstructed Unit (MRRU). This is the maximum frame that can be reconstructed from multilink fragments. This object is only applicable to tmnxBundleType values of mlppp or mlfr. All non applicable types have a value of zero.
U32 tmnxBundleNumActiveLinks	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.6	Unsigned32	read-only	tmnxBundleNumActiveLinks indicates the current number of active links belonging to this bundle.
U32 tmnxBundleNumLinks	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.5	Unsigned32	read-only	tmnxBundleNumLinks indicates the total number of links configured for this bundle.
U32 tmnxBundleOperMRRU	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.8	Unsigned32	read-only	tmnxBundleOperMRRU indicates the operational value of Max Received Reconstructed Unit (MRRU). This object is only applicable to tmnxBundleType values of mlppp or mlfr. All non applicable types have a value of zero.
U32 tmnxBundleOperMTU	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.10	Unsigned32	read-only	tmnxBundleOperMTU indicates the operational MTU of the bundle.
U32 tmnxBundlePeerMRRU	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.9	Unsigned32	read-only	tmnxBundlePeerMRRU indicates the MRRU value sent by the peer during negotiation. This object is only applicable to tmnxBundleType values of mlppp or mlfr. All non applicable types have a value of zero.
U32 tmnxBundleRedDiffDelay	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.11	Unsigned32	read-create	tmnxBundleRedDiffDelay configures the maximum acceptable differential delay for individual circuits within this multilink bundle. If the delay exceeds this threshold, a tmnxEqPortBndlRedDiffExceeded trap is issued. For a tmnxBundleType value of 'imagrp' a range of 0 to 50 is supported, 0 to 25 otherwise.
U32 tmnxBundleUpTime	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.17	Unsigned32	read-only	tmnxBundleUpTime indicates the time since the bundle is operationally 'inService'.
U32 tmnxBundleYellowDiffDelay	1.3.6.1.4.1.6527.3.1.2.2.4.14.1.13	Unsigned32	read-create	tmnxBundleYellowDiffDelay configures the yellow warning threshold for the differential delay for the circuits within a given multilink bundle. If the delay exceeds this threshold, a tmnxEqPortBndlYellowDiffExceeded trap is issued. This object is only applicable to tmnxBundleType values of 'mlppp' or 'mlfr'. All non applicable types have a value of zero.
U32 tmnxCiscoHDLCDiscardStatInPkts	1.3.6.1.4.1.6527.3.1.2.2.12.3.1.1	Unsigned32	read-only	tmnxCiscoHDLCDiscardStatInPkts indicates the number of inbound Cisco HDLC packets discarded.
U32 tmnxCiscoHDLCDiscardStatOutPkts	1.3.6.1.4.1.6527.3.1.2.2.12.3.1.2	Unsigned32	read-only	tmnxCiscoHDLCDiscardStatOutPkts indicates the number of outbound Cisco HDLC packets discarded.
U32 tmnxCiscoHDLCDownCount	1.3.6.1.4.1.6527.3.1.2.2.4.20.1.3	Unsigned32	read-create	tmnxCiscoHDLCDownCount specifies the number of 'tmnxCiscoHDLCKeepAliveInt' intervals that must pass without receiving a keepalive packet before the link is declared down. It is expected that the nodes at the two endpoints of the Cisco HDLC link are provisioned with the same values.
U32 tmnxCiscoHDLCKeepAliveInt	1.3.6.1.4.1.6527.3.1.2.2.4.20.1.1	Unsigned32	read-create	tmnxCiscoHDLCKeepAliveInt specifies the interval in seconds used for sending periodic keepalive packets. The default value is set to 10 seconds. A value of 0 specifies that the keepalive function is turned off. It is expected that the nodes at the two endpoints of the Cisco HDLC link are provisioned with the same values.
U32 tmnxCiscoHDLCStatInOctets	1.3.6.1.4.1.6527.3.1.2.2.12.3.1.5	Unsigned32	read-only	tmnxCiscoHDLCStatInOctets indicates the number of inbound Cisco HDLC octets.
U32 tmnxCiscoHDLCStatInPkts	1.3.6.1.4.1.6527.3.1.2.2.12.3.1.3	Unsigned32	read-only	tmnxCiscoHDLCStatInPkts indicates the number of inbound Cisco HDLC packets.
U32 tmnxCiscoHDLCStatOutOctets	1.3.6.1.4.1.6527.3.1.2.2.12.3.1.6	Unsigned32	read-only	tmnxCiscoHDLCStatOutOctets indicates the number of outbound Cisco HDLC octets.
U32 tmnxCiscoHDLCStatOutPkts	1.3.6.1.4.1.6527.3.1.2.2.12.3.1.4	Unsigned32	read-only	tmnxCiscoHDLCStatOutPkts indicates the number of outbound Cisco HDLC packets.
U32 tmnxCiscoHDLCUpCount	1.3.6.1.4.1.6527.3.1.2.2.4.20.1.2	Unsigned32	read-create	tmnxCiscoHDLCUpCount specifies the number of continual keepalive packets that has to be received to declare the link up. It is expected that the nodes at the two endpoints of the Cisco HDLC link are provisioned with the same values.
U32 tmnxDDMExtCalRxPower0	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.45	Unsigned32	read-only	The value of tmnxDDMExtCalRxPower0 indicates the Rx_PWR(0) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalRxPower1	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.44	Unsigned32	read-only	The value of tmnxDDMExtCalRxPower1 indicates the Rx_PWR(1) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalRxPower2	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.43	Unsigned32	read-only	The value of tmnxDDMExtCalRxPower2 indicates the Rx_PWR(2) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalRxPower3	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.42	Unsigned32	read-only	The value of tmnxDDMExtCalRxPower3 indicates the Rx_PWR(3) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8462 Rev 10.2.
U32 tmnxDDMExtCalRxPower4	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.41	Unsigned32	read-only	The value of tmnxDDMExtCalRxPower4 indicates the Rx_PWR(4) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalTemperatureSlope	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.50	Unsigned32	read-only	The value of tmnxDDMExtCalTemperatureSlope indicates the T(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalTxLaserBiasSlope	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.46	Unsigned32	read-only	The value of tmnxDDMExtCalTxLaserBiasSlope indicates the Tx_l(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalTxPowerSlope	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.48	Unsigned32	read-only	The value of tmnxDDMExtCalTxPowerSlope indicates the Tx_PWR(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDDMExtCalVoltageSlope	1.3.6.1.4.1.6527.3.1.2.2.4.31.1.52	Unsigned32	read-only	The value of tmnxDDMExtCalVoltageSlope indicates the V(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2.
U32 tmnxDS0ChanGroupAcctPolicyId	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.10	Unsigned32	read-create	The value of tmnxDS0ChanGroupAcctPolicyId specifies an existing accounting policy to use for the ds0 channel-group. Accounting policies can only be associated with network ports or channels. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this channel-group. A zero value indicates that there is no accounting policy associated with this channel
U32 tmnxDS0ChanGroupMTU	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.5	Unsigned32	read-create	The size of the largest packet which can be sent/received on the channel group, specified in octets. For groups that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent. Setting tmnxDS0ChanGroupMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1522 with mode access and encap-type bcp-null 1526 with mode access and encap-type bcp-dot1q 1502 with mode access and encap-type ipcp 4474 with mode access and encap-type frame-relay 1524 with mode access and encap-type atm 2092 with mode access and encap-type cem
U32 tmnxDS0ChanGroupOperMTU	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.6	Unsigned32	read-only	The negotiated size of the largest packet which can be sent on the channel group, specified in octets. For channel groups that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent.
U32 tmnxDS0ChanGroupPayloadPattern	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.13	Unsigned32	read-create	The value of tmnxDS0ChanGroupPayloadPattern specifies the idle payload fill pattern when the CEM channel group experiences an underrun and tmnxDS0ChanGroupPayloadFillType is set to 'userDefinedPattern'. The default value depends on the encap type of the channel group: For CEM encap channel group - 255 (Valid range 0..255) For non-CEM encap channel group - 0 (Valid range 0..0).
U32 tmnxDS0ChanGroupSignalPattern	1.3.6.1.4.1.6527.3.1.2.2.4.13.1.15	Unsigned32	read-create	The value of tmnxDS0ChanGroupSignalPattern specifies the idle signal fill pattern when the CAS CEM channel group experiences an underrun and tmnxDS0ChanGroupSignalFillType is set to 'userDefinedPattern'. CAS ESF DS1 and CAS E1 support 4 signalling bits per timeslot (ABCD) CAS SF DS1 supports 2 signalling bits per timeslot (AB) The default value depends on the type of channel group: For CAS DS1 ESF or CAS E1 channel group - 15 (Valid range 0..15) For CAS DS1 SF channel group - 3 (Valid range 0..3) For non-CAS or non-CEM channel group - 0 (Valid range 0..0)
U32 tmnxDS1BerSdThreshold	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.24	Unsigned32	read-create	The value of tmnxDS1BerSdThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortDS1Alarm notification for a BER SD failure and a tmnxEqPortDS1AlarmClear notification for a BER SD failure clear. Bit error computed must reach/exceed threshold value over a pre-defined period of time for the tmnxEqPortSonetAlarm notification to be sent. The value of tmnxDS1Framing defines how the bit error is computed and what values of tmnxDS1BerSdThreshold are allowed. The following table defines this dependency: tmnxDS1Framing Bit error calculation and value supported -------------- ----------------------------------------- esf (1) each CRC error is counted as one bit error g704 (4) values supported are 1,5,10,50,100 other values bit error alarms not supported, value of tmnxDS1BerSdThreshold set to default and cannot be changed tmnxDS1BerSdThreshold value must not exceed the value of tmnxDS1BerSfThreshold.
U32 tmnxDS1BerSfThreshold	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.25	Unsigned32	read-create	The value of tmnxDS1BerSfThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortDS1Alarm notification for a BER SF failure and a tmnxEqPortDS1AlarmClear notification for a BER SF failure clear. Bit error computed must reach/exceed threshold value over a pre-defined period of time for the tmnxEqPortSonetAlarm notification to be sent. The value of tmnxDS1Framing defines how the bit errors are computed and what values of tmnxDS1BerSfThreshold are allowed. The following table defines this dependency: tmnxDS1Framing Bit error calculation and value supported -------------- ----------------------------------------- esf (1) each CRC error is counted as one bit error g704 (4) values supported are 1,5,10,50,100 other values bit error alarms not supported, value of tmnxDS1BerSfThreshold set to default and cannot be changed tmnxDS1BerSfThreshold value must not be smaller than tmnxDS1BerSdThreshold value
U32 tmnxDS1BERTDuration	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.9	Unsigned32	read-create	tmnxDS1BERTDuration is used to set the duration of the BERT test.
U32 tmnxDS1BERTSynched	1.3.6.1.4.1.6527.3.1.2.2.4.12.1.15	Unsigned32	read-only	tmnxDS1BERTSynched is the number of seconds for which the BERT hardware was synchronized. This will be less than or equal to the duration of the last BERT test. It is valid only after tmnxDS1BERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
U32 tmnxDS3ChannelAcctPolicyId	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.36	Unsigned32	read-create	The value of tmnxDS3ChannelAcctPolicyId specifies an existing accounting policy to use for the ds3 channel. Accounting policies can only be associated with network ports or channels. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this channel. A zero value indicates that there is no accounting policy associated with this channel
U32 tmnxDS3ChannelBERTDuration	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.12	Unsigned32	read-create	tmnxDS3ChannelBERTDuration is used to set the duration of the BERT test.
U32 tmnxDS3ChannelBERTSynched	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.32	Unsigned32	read-only	tmnxDS3ChannelBERTSynched is the number of seconds for which the BERT hardware was synchronized. This will be less than or equal to the duration of the last BERT test. It is valid only after tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle' the last time BERT was activated.
U32 tmnxDS3ChannelMTU	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.23	Unsigned32	read-create	The size of the largest packet which can be sent/received on the port, specified in octets. For ports that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the sonet path. Setting tmnxDS3ChannelMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1522 with mode access and encap-type bcp-null 1526 with mode access and encap-type bcp-dot1q 1502 with mode access and encap-type ipcp 4474 with mode access and encap-type frame-relay 1524 with mode access and encap-type atm 2092 with mode access and encap-type cem
U32 tmnxDS3ChannelOperMTU	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.24	Unsigned32	read-only	The negotiated size of the largest packet which can be sent on the channel, specified in octets. For channels that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent.
U32 tmnxDS3ChannelSubrate	1.3.6.1.4.1.6527.3.1.2.2.4.11.1.7	Unsigned32	read-create	tmnxDS3ChannelSubrate configures the subrate step. tmnxDS3ChannelSubrate multiplied by the granularity for a particular mode as defined by tmnxDS3ChannelSubrateCSUMode gives the absoulte subrate in kbps. ----------------------------------------------------------------------- Subrate CSU Mode\|Granularity\|Default \|Range \|Subrate speed range ----------------------------------------------------------`------------- notUsed \| N/A \| 0 \| 0 \|N/A digital-link \| 301 kbps \| 1 \| 1 to 147 \|301 kbps to 44.2 mbps -----------------------------------------------------------------------
U32 tmnxPortEgrPoolPercentRate	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.63	Unsigned32	read-write	The value of tmnxPortEgrPoolPercentRate specifies increment or decrement of the active bandwidth associated with the egress port. This active bandwidth affects the amount of egress buffer space managed by the port.
U32 tmnxPortEtherAcctPolicyId	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.7	Unsigned32	read-write	The value of the accounting policy must be defined prior to associating the policy with the ethernet port. Accounting policies can only be associated with network ports. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this port. A zero value indicates that there is no accounting policy associated with this port
U32 tmnxPortEtherDot1qEtype	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.12	Unsigned32	read-write	The tmnxPortEtherDot1qEtype variable indicates the ethertype expected when the port's encapsulation type is dot1qEncap.
U32 tmnxPortEtherDownWhenLoopedKeepAlive	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.22	Unsigned32	read-write	The tmnxPortEtherDownWhenLoopedKeepAlive variable specifies the number of seconds between each keep alive PDU transmission.
U32 tmnxPortEtherDownWhenLoopedRetry	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.23	Unsigned32	read-write	The tmnxPortEtherDownWhenLoopedRetry variable specifies the minimum number of seconds the port should wait after detecting a loop before tmnxPortState can be set to 'up'. A value of 0 specifies the the port should not set tmnxPortState to 'up' until the user administratively disables and re-enables the port by setting tmnxPortAdminStatus to 'outOfService' and then to 'inService'.
U32 tmnxPortEtherMTU	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.1	Unsigned32	read-write	The size of the largest packet which can be sent/received on the Ethernet physical interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface. Setting tmnxPortEtherMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1514 with mode access and encap-type null 1518 with mode access and encap-type dot1q 1518 with mode access and encap-type mpls 9198 with mode network
U32 tmnxPortEtherOperSpeed	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.6	Unsigned32	read-only	The tmnxPortEtherOperSpeed variable indicates the operational speed of the Ethernet interface in mega-bits per second (mbps). If the value of tmnxPortEtherAutoNegotiate is 'true', the link autonegotiates the link parameters with the far end side. The value of tmnxPortEtherOperSpeed is only valid if tmnxPortClass is one of the Ethernet classes.
U32 tmnxPortEtherPBBEtype	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.25	Unsigned32	read-write	The tmnxPortEtherPBBEtype variable indicates the Ethertype expected for Provider Backbone Bridging Frames.
U32 tmnxPortEtherQinqEtype	1.3.6.1.4.1.6527.3.1.2.2.4.4.1.13	Unsigned32	read-write	The tmnxPortEtherQinqEtype variable indicates the ethertype expected when the port's encapsulation type is qinqEncap.
U32 tmnxPortHoldTimeDown	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.15	Unsigned32	read-write	The value of tmnxPortHoldTimeDown is used to configure the hold-timer for link down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that a down transition is reported immediately. The value of tmnxPortHoldTimeDown is not applicable when tmnxPortClass has a value of 'sonet (5)'. In that case, tmnxSonetHoldTimeDown is used instead.
U32 tmnxPortHoldTimeUp	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.14	Unsigned32	read-write	The value of tmnxPortHoldTimeUp is used to configure the hold-timer for link up event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that an up transition is reported immediately. The value of tmnxPortHoldTimeUp is not applicable when tmnxPortClass has a value of 'sonet (5)'. In that case, tmnxSonetHoldTimeUp is used instead.
U32 tmnxPortIngPoolPercentRate	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.62	Unsigned32	read-write	The value of tmnxPortIngPoolPercentRate specifies increment or decrement of the active bandwidth associated with the ingress port. This active bandwidth affects the amount of ingress buffer space managed by the port.
U32 tmnxPortLagId	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.13	Unsigned32	read-write	The value of tmnxPortLagId indicates which LAG or multi-link trunk (MLT) this port is assigned to. If this port is not associated with any LAG, this value will be set to zero(0). The maximum value of this object is '64', when the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5' (ESS-1/SR-1).
U32 tmnxPortNumAlarms	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.41	Unsigned32	read-only	The number of alarms currently outstanding on this port.
U32 tmnxPortNumChannels	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.49	Unsigned32	read-only	For SONET/SDH paths or TDM channels, tmnxPortNumChannels contains the number of possible immediate children. For leaf paths or channels, the value of this object will be zero. For SONET/SDH or TDM physical ports, tmnxPortNumChannels contains the total number of channels on the physical port. For all other entries in the tmnxPortTable, the value of this object will be zero.
U32 tmnxPortSFPVendorOUI	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.31	Unsigned32	read-only	The vendor organizationally unique identifier field (OUI) contains the IEEE company identifier for the vendor. A value of all zero indicates that the vendor OUI is unspecified.
U32 tmnxPortTestParameter	1.3.6.1.4.1.6527.3.1.2.2.4.3.1.3	Unsigned32	read-write	A parameter to be passed to the test program.
U32 tmnxPortTransceiverLaserWaveLen	1.3.6.1.4.1.6527.3.1.2.2.4.2.1.27	Unsigned32	read-only	The light wavelength transmitted by the transceiver's laser. A value of zero indicates that the port is not equipped with the transceiver.
U32 tmnxSonetBerSdThreshold	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.5	Unsigned32	read-write	The value of tmnxSonetBerSdThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortSonetAlarm notification for a BER SD failure and tmnxEqPortSonetAlarmClear notification for a BER SD failure clear. tmnxSonetBerSdThreshold is the absolute value of the exponent of the rate expressed as 10e-n.
U32 tmnxSonetBerSfThreshold	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.6	Unsigned32	read-write	The value of tmnxSonetBerSfThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortSonetAlarm notification for a BER SF failure and tmnxEqPortSonetAlarmClear notification for a BER SF failure clear. tmnxSonetBerSdThreshold is the absolute value of the exponent of the rate expressed as 10e-n.
U32 tmnxSonetHoldTimeDown	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.26	Unsigned32	read-write	The value of tmnxSonetHoldTimeDown is used to configure the hold-timer for link down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that a down transition is reported immediately.
U32 tmnxSonetHoldTimeUp	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.25	Unsigned32	read-write	The value of tmnxSonetHoldTimeUp is used to configure the hold-timer for link up event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that an up transition is reported immediately.
U32 tmnxSonetMonK1Byte	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.22	Unsigned32	read-only	The tmnxSonetMonK1Byte variable reports the Automatic Protection Switching(APS) signalling status from the K1 byte in the SONET Line Overhead Header.
U32 tmnxSonetMonK2Byte	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.23	Unsigned32	read-only	The tmnxSonetMonK1Byte variable reports the Automatic Protection Switching(APS) signalling status from the K2 byte in the SONET Line Overhead Header.
U32 tmnxSonetMonS1Byte	1.3.6.1.4.1.6527.3.1.2.2.4.5.1.20	Unsigned32	read-only	The tmnxSonetMonS1Byte variable reports the Synchronization Status Message from the S1 byte in the Line Overhead Header. A value of 0x00 indicates unknown quality. A value of 0xF0 indicates `Do not use for synchronization`. Other values are documented in Tellcordia GR253 and ITU G.707
U32 tmnxSonetPathAcctPolicyId	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.11	Unsigned32	read-create	The value of the accounting policy must be defined prior to associating the policy with the sonet path. Accounting policies can only be associated with network sonet path. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this port. A zero value indicates that there is no accounting policy associated with this port
U32 tmnxSonetPathC2Byte	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.5	Unsigned32	read-create	The tmnxSonetPathC2Byte variable is used configure the value used in the SONET/SDH C2 header byte. For paths on an MDA that does not support channelization: Setting C2 equal to 0x16 indicates scrambled sonet. Setting C2 equal to 0xCF indicates unscrambled sonet. Setting C2 equal to 0x13 indicates ATM. For paths on an MDA that supports channelization, the default value is based on the value of tmnxMDAMaxChannelization. For 'pdhDs3' or 'pdhE3' channelization, the default value is 0x04. Setting tmnxSonetPathC2Byte to a value of zero(0) causes the agent to assign the default value to this object.
U32 tmnxSonetPathMonC2Byte	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.14	Unsigned32	read-only	The tmnxSonetPathC2Byte variable reports the value in the SONET/SDH C2 header byte.
U32 tmnxSonetPathMTU	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.3	Unsigned32	read-create	The size of the largest packet which can be sent/received on the sonet path, specified in octets. For paths that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the sonet path. Setting tmnxSonetPathMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical default values are: 1522 with mode access and encap-type bcp-null 1526 with mode access and encap-type bcp-dot1q 1502 with mode access and encap-type ipcp 1506 with mode access and encap-type mplscp 1524 with mode access and encap-type atm 9208 with mode network
U32 tmnxSonetPathOperMRU	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.9	Unsigned32	read-only	The negotiated size of the largest packet that can be received on the sonet path, specified in octets.
U32 tmnxSonetPathOperMTU	1.3.6.1.4.1.6527.3.1.2.2.4.6.1.8	Unsigned32	read-only	The negotiated size of the largest packet which can be sent on the sonet path, specified in octets. For sonet paths that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the sonet path.
No type (169)
tmnx7710PortTDMGroupV3v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.34			The group of objects supporting management of TDM type ports specific to the Alcatel 7710 SR series systems for revision 3.0.
tmnx7710PortTDMGroupV5v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.43			The group of objects supporting management of TDM type ports specific to the revision 5.0 on Alcatel 7710 SR series systems.
tmnxATMIntfEntry	1.3.6.1.4.1.6527.3.1.2.2.11.1.1		not-accessible	The Parameters for a particular ATM Cell Management Interface. Entries cannot be created or deleted via SNMP SET operations. Entries will exist in this table when ATM encapsulation is configured on the port/channel.
tmnxATMIntfTable	1.3.6.1.4.1.6527.3.1.2.2.11.1		not-accessible	The tmnxATMIntfTable has an entry for each port/channel in the system that is configured for ATM. It contains ATM cell layer configuration parameters.
tmnxATMObjs	1.3.6.1.4.1.6527.3.1.2.2.11
tmnxBPGrpAssocEntry	1.3.6.1.4.1.6527.3.1.2.2.4.25.1		not-accessible	Each row displays the relationship between a Bundle Protection group and its working and protection bundle.
tmnxBPGrpAssocTable	1.3.6.1.4.1.6527.3.1.2.2.4.25		not-accessible	The tmnxBPGrpAssocTable has an entry for each Bundle Protection Group created on the system.
tmnxBundleEntry	1.3.6.1.4.1.6527.3.1.2.2.4.14.1		not-accessible	Each row entry represents a multilink bundle on a MDA. Entries can be created and deleted via SNMP SET operations using the tmnxBundleRowStatus object. The tmnxBundleBundleID will contain the bundle number encoded in it. The bundle number is unique for a MDA. For each tmnxBundleEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
tmnxBundleImaGrpEntry	1.3.6.1.4.1.6527.3.1.2.2.4.21.1		not-accessible	Each row entry contains data on an IMA Group.
tmnxBundleImaGrpTable	1.3.6.1.4.1.6527.3.1.2.2.4.21		not-accessible	The tmnxBundleImaGrpTable contains IMA Group data
tmnxBundleMemberEntry	1.3.6.1.4.1.6527.3.1.2.2.4.15.1		not-accessible	Each row represents a port associated with a bundle. Entries can be added or removed from this table using SNMP SET operation.
tmnxBundleMemberImaEntry	1.3.6.1.4.1.6527.3.1.2.2.4.22.1		not-accessible	Each row entry represents an IMA link associated with an IMA Group.
tmnxBundleMemberImaTable	1.3.6.1.4.1.6527.3.1.2.2.4.22		not-accessible	The tmnxBundleMemberImaTable has an entry for an IMA link associated with an IMA Group.
tmnxBundleMemberTable	1.3.6.1.4.1.6527.3.1.2.2.4.15		not-accessible	The tmnxBundleMemberTable has an entry for a member port associated with a multilink bundle.
tmnxBundleMlpppEntry	1.3.6.1.4.1.6527.3.1.2.2.4.26.1		not-accessible	Each row entry contains data on an MLPPP Bundle.
tmnxBundleMlpppTable	1.3.6.1.4.1.6527.3.1.2.2.4.26		not-accessible	The tmnxBundleMlpppTable contains MLPPP specific data.
tmnxBundleTable	1.3.6.1.4.1.6527.3.1.2.2.4.14		not-accessible	The tmnxBundleTable has an entry for a bundle created on the system.
tmnxCiscoHDLCEntry	1.3.6.1.4.1.6527.3.1.2.2.4.20.1		not-accessible	The tmnxCiscoHDLCEntry specifies parameters for a particular interfaces running Cisco HDLC encapsulation. Entries cannot be created and deleted via SNMP SET operations.
tmnxCiscoHDLCGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.26			The group of objects supporting Cisco HDLC encapsulation on Alcatel 7750 SR series systems.
tmnxCiscoHDLCStatsEntry	1.3.6.1.4.1.6527.3.1.2.2.12.3.1		not-accessible	An entry in the tmnxCiscoHDLCStatsTable.
tmnxCiscoHDLCStatsTable	1.3.6.1.4.1.6527.3.1.2.2.12.3		not-accessible	The tmnxCiscoHDLCStatsTable has an entry for each port in the system that is configured for Cisco HDLC encapsulation. It contains Cisco HDLC protocol statistics for the particular port.
tmnxCiscoHDLCTable	1.3.6.1.4.1.6527.3.1.2.2.4.20		not-accessible	The tmnxCiscoHDLCTable has an entry for each port in the system that is configured for Cisco HDLC. It contains the parameters related to Cisco HDLC protocol on this port.
tmnxDigitalDiagMonitorEntry	1.3.6.1.4.1.6527.3.1.2.2.4.31.1		not-accessible	Each row represents a particular SFP/XFP that supports Digital Diagnostic Monitoring. Entries are created and deleted internally by the system.
tmnxDigitalDiagMonitorGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.53			The group of objects supporting the management of Digital Diagnostic Monitoring SFP/XFPs for revision 6.0 on Alcatel 7x50 SR series systems.
tmnxDigitalDiagMonitorTable	1.3.6.1.4.1.6527.3.1.2.2.4.31		not-accessible	The tmnxDigitalDiagMonitorTable has an entry for each SFP/XFP in the system that supports Digital Diagnostic Monitoring (DDM). The table is indexed by TmnxPortID. Each row in this table is dynamically added and removed internally by the system based on the presence or absence of DDM capable SFP/XFP components.
tmnxDS0ChanGroupEntry	1.3.6.1.4.1.6527.3.1.2.2.4.13.1		not-accessible	Each row entry represents one or more DS0 channels on a DS1 interface. tmnxDS0ChanGroupTimeSlots object is used to add or remove DS0 channels from the group. Entries can be created and deleted via SNMP SET operations using the tmnxDS0ChanGroupRowStatus object. For each tmnxDS0ChanGroupEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
tmnxDS0ChanGroupTable	1.3.6.1.4.1.6527.3.1.2.2.4.13		not-accessible	The tmnxDS0ChanGroupTable has an entry for DS0 channels grouped together and belonging to a particular DS1 channel.
NTF tmnxDS1E1LoopbackStarted	1.3.6.1.4.1.6527.3.1.3.2.2.0.24			The tmnxDS1E1LoopbackStarted notification is generated when a loopback is provisioned on a DS1/E1 port.
NTF tmnxDS1E1LoopbackStopped	1.3.6.1.4.1.6527.3.1.3.2.2.0.25			The tmnxDS1E1LoopbackStopped notification is generated when a loopback is removed on a DS1/E1 port. The value of tmnxSonetLoopback specifies the type of loopback that was configured and has now been removed.
tmnxDS1Entry	1.3.6.1.4.1.6527.3.1.2.2.4.12.1		not-accessible	Each row entry represents a DS1 channel on a IOM card in a chassis in the system. DS1 channel entries for DS3 ports cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when tmnxDS3ChannelChannelized is set to 'true'. DS1 channel entries for DS1 ports can be created and deleted via SNMP SET operations. For each tmnxDS1Entry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
tmnxDS1PortEntry	1.3.6.1.4.1.6527.3.1.2.2.4.23.1		not-accessible	Each row entry represents a physical DS1 port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when the tmnxMDAAssignedType object is set to the DS1 MDA type The tmnxDS1PortEntry contains attributes that are unique to the 'ds1e1' TmnxPortType. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each tmnxDS1PortEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
tmnxDS1PortTable	1.3.6.1.4.1.6527.3.1.2.2.4.23		not-accessible	The tmnxDS1PortTable has an entry for a DS1 physical port.
tmnxDS1Table	1.3.6.1.4.1.6527.3.1.2.2.4.12		not-accessible	The tmnxDS1Table has an entry for each DS1 channel.
tmnxDS3ChannelEntry	1.3.6.1.4.1.6527.3.1.2.2.4.11.1		not-accessible	Each row entry represents a DS3 channel. Entries can be created and deleted via SNMP SET operations. The tmnxDS3ChannelEntry contains attributes that are applicable to a DS3 channel which can belong to the DS3 physical port or belong to a container on a sonet path. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each tmnxDS3ChannelEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
tmnxDS3ChannelTable	1.3.6.1.4.1.6527.3.1.2.2.4.11		not-accessible	The tmnxDS3ChannelTable has an entry for a DS3 channel.
NTF tmnxDS3E3LoopbackStarted	1.3.6.1.4.1.6527.3.1.3.2.2.0.26			The tmnxDS3E3LoopbackStarted notification is generated when a loopback is provisioned on a DS3/E3 port.
NTF tmnxDS3E3LoopbackStopped	1.3.6.1.4.1.6527.3.1.3.2.2.0.27			The tmnxDS3E3LoopbackStopped notification is generated when a loopback is removed on a DS3/E3 port. The value of tmnxDS3ChannelLoopback specifies the type of loopback that was configured and has now been removed.
tmnxDS3Entry	1.3.6.1.4.1.6527.3.1.2.2.4.10.1		not-accessible	Each row entry represents a physical DS3 port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when the tmnxMDAAssignedType object is set to the DS3 MDA type The tmnxDS3Entry contains attributes that are unique to the 'ds3e3' TmnxPortType. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each tmnxDS3Entry, there will be a corresponding entry in the tmnxPortTable and the ifTable.
tmnxDS3Table	1.3.6.1.4.1.6527.3.1.2.2.4.10		not-accessible	The tmnxDS3Table has an entry for a DS3 physical port.
NTF tmnxEqDigitalDiagMonitorFailure	1.3.6.1.4.1.6527.3.1.3.2.2.0.35			Generated when an SFP/XFP that supports Digital Diagnostic Monitoring (DDM) enters a failed state.
NTF tmnxEqOobPortFailure	1.3.6.1.4.1.6527.3.1.3.2.2.0.1			Generated when the out-of-band Ethernet port has failed. On the Alcatel 7x50 SR system, the out-of-band port is the CPM management interface. This notification was made obsolete in the 2.1 release. The Out-of-band, OOB, port is what id refered to as the management port or cpm port. It has an entry in ifTable and linkup, linkDown and tmnxEqPortError notifications are sent for the management port just as for any other port in the system.
NTF tmnxEqPortBndlBadEndPtDiscr	1.3.6.1.4.1.6527.3.1.3.2.2.0.21			Generated when the port detected mismatched peer endpoint discriminator for the bundle.
NTF tmnxEqPortBndlRedDiffExceeded	1.3.6.1.4.1.6527.3.1.3.2.2.0.20			Generated when the differential delay of a port in the bundle exceeds the configured value in tmnxBundleRedDiffDelay.
NTF tmnxEqPortBndlYellowDiffExceeded	1.3.6.1.4.1.6527.3.1.3.2.2.0.19			Generated when the differential delay of a port in the bundle exceeds the configured value in tmnxBundleYellowDiffDelay.
NTF tmnxEqPortDS1Alarm	1.3.6.1.4.1.6527.3.1.3.2.2.0.17			Generated when a DS1 interface alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxDS1ReportAlarm.
NTF tmnxEqPortDS1AlarmClear	1.3.6.1.4.1.6527.3.1.3.2.2.0.18			Generated when a DS1 interface alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxDS1ReportAlarm.
NTF tmnxEqPortDS3Alarm	1.3.6.1.4.1.6527.3.1.3.2.2.0.15			Generated when a DS3 interface alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxDS3ChannelReportAlarm.
NTF tmnxEqPortDS3AlarmClear	1.3.6.1.4.1.6527.3.1.3.2.2.0.16			Generated when a DS3 interface alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxDS3ChannelReportAlarm.
NTF tmnxEqPortDuplexCfgNotCompatible	1.3.6.1.4.1.6527.3.1.3.2.2.0.33			Generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured duplex on an MDA port is not compatible with the inserted MDA.
NTF tmnxEqPortError	1.3.6.1.4.1.6527.3.1.3.2.2.0.14			Generated when an error listed in tmnxPortNotifyError is detected on the port.
NTF tmnxEqPortEtherAlarm	1.3.6.1.4.1.6527.3.1.3.2.2.0.22			tmnxEqPortEtherAlarm is generated when a ethernet port alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxPortEtherReportAlarm.
NTF tmnxEqPortEtherAlarmClear	1.3.6.1.4.1.6527.3.1.3.2.2.0.23			tmnxEqPortEtherAlarmClear is generated when a ethernet port alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxPortEtherReportAlarm.
NTF tmnxEqPortEtherLoopCleared	1.3.6.1.4.1.6527.3.1.3.2.2.0.31			The tmnxEqPortEtherLoopCleared notification is generated when down-when-looped detects an Ethernet port has stopped receiving PDUs that it transmitted and tmnxPortEtherDownWhenLoopedEnabled is set to 'true'. Setting tmnxPortEtherDownWhenLoopedEnabled to 'false' will also cause this notification to be generated if tmnxEqPortEtherLoopDetected had previously been raised.
NTF tmnxEqPortEtherLoopDetected	1.3.6.1.4.1.6527.3.1.3.2.2.0.30			The tmnxEqPortEtherLoopDetected notification is genereated when down-when-looped detects an Ethernet port is receiving PDUs that it transmitted and tmnxPortEtherDownWhenLoopedEnabled is set to 'true'.
NTF tmnxEqPortFailure	1.3.6.1.4.1.6527.3.1.3.2.2.0.2			Generated when a port has failed. This notification was made obsolete in the 2.1 release. tmnxEqPortError is used instead of tmnxEqPortFailure. Standard IETF linkDown notification is sent when a physical port failure is detected. tmnxEqPortError is sent with a ASCII reason message when port errors are detected. It was originally intended that tmnxEqPortError be used to report errors that do not cause port state change to 'down'. tmnxEqPortFailure was intended to report errors that do cause the port state change to 'down'. However, in the implementation tmnxEqPortError is used for both fatal and non-fatal errors.
NTF tmnxEqPortIngressRateCfgNotCompatible	1.3.6.1.4.1.6527.3.1.3.2.2.0.34			Generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured ingress rate on an MDA port is not compatible with the inserted MDA.
NTF tmnxEqPortSFPCorrupted	1.3.6.1.4.1.6527.3.1.3.2.2.0.11			Generated when SFP information stored in the EPROM on the SFP is corrupt. This notification was made obsolete for revision 6.0 on Alcatel 7x50 SR series systems; it was replaced by tmnxEqPortSFPStatusFailure.
NTF tmnxEqPortSFPInserted	1.3.6.1.4.1.6527.3.1.3.2.2.0.8			Generated when a SFP is inserted in the port.
NTF tmnxEqPortSFPRemoved	1.3.6.1.4.1.6527.3.1.3.2.2.0.9			Generated when a SFP is removed from the port.
NTF tmnxEqPortSFPStatusFailure	1.3.6.1.4.1.6527.3.1.3.2.2.0.36			Generated when the tmnxPortSFPStatus of an SFP/XFP results in a value other than 'not-equipped (0)', or 'operational (1)'. tmnxEqPortSFPStatusFailure obsoleted tmnxEqPortSFPCorrupted for revision 6.0 on Alcatel 7x50 SR series systems.
NTF tmnxEqPortSonetAlarm	1.3.6.1.4.1.6527.3.1.3.2.2.0.4			Generated when a SONET/SDH port alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxSonetReportAlarm.
NTF tmnxEqPortSonetAlarmClear	1.3.6.1.4.1.6527.3.1.3.2.2.0.5			Generated when a SONET/SDH port alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxSonetReportAlarm.
NTF tmnxEqPortSonetPathAlarm	1.3.6.1.4.1.6527.3.1.3.2.2.0.6			Generated when a SONET/SDH path alarm condition is detected. It is generated only when the type of alarm being raised is enabled in tmnxSonetPathReportAlarm.
NTF tmnxEqPortSonetPathAlarmClear	1.3.6.1.4.1.6527.3.1.3.2.2.0.7			Generated when a SONET/SDH path alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in tmnxSonetPathReportAlarm.
NTF tmnxEqPortSpeedCfgNotCompatible	1.3.6.1.4.1.6527.3.1.3.2.2.0.32			Generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but the currently configured speed on an MDA port is not compatible with the inserted MDA.
NTF tmnxEqPortWrongSFP	1.3.6.1.4.1.6527.3.1.3.2.2.0.10			Generated when a wrong type of SFP optics module is plugged into a 1 Gig MDA, SONET MDA, or 100FX MDA. Because of the large variety of SFPs now supported and their different encoding schemes for compliance bits, the check for wrong SFP has been removed. As a result, tmnxEqPortWrongSFP notification is no longer generated. However, wrong SFP can be inferred from port statistics.
tmnxFRDlcmiEntry	1.3.6.1.4.1.6527.3.1.2.2.9.1.1		not-accessible	The Parameters for a particular Data Link Connection Management Interface. Entries cannot be created and deleted via SNMP SET operations.
tmnxFRDlcmiTable	1.3.6.1.4.1.6527.3.1.2.2.9.1		not-accessible	The tmnxFRDlcmiTable has an entry for each port in the system that is configured for Frame Relay. It contains the parameters for the Data Link Connection Management Interface (DLCMI) for the frame relay service on this port.
tmnxFRObjs	1.3.6.1.4.1.6527.3.1.2.2.9
tmnxMcMlpppBundleGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.45			The group of objects supporting management of MClass MLPPP BUNDLES for revision 6.0 on the Alcatel 7x50 SR series systems.
tmnxMcMlpppStatsEntry	1.3.6.1.4.1.6527.3.1.2.2.12.4.1		not-accessible	Defines an entry in tmnxMcMlpppStatsTable. Entries are created and deleted by the system depending on the number of classes being used by a given MLPPP bundle.
tmnxMcMlpppStatsTable	1.3.6.1.4.1.6527.3.1.2.2.12.4		not-accessible	Defines the Alcatel 7x50 SR series Multiclass MLPPP statistics table for providing the capability of retrieving the traffic statistics for the physical queues being used for a class of a multiclass MLPPP bundle to forward the traffic.
tmnxMlBundleGroupV4v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.32			The group of objects supporting management MLBUNDLES for revision 4.0 on the Alcatel 7x50 SR series systems.
tmnxMlBundleGroupV5v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.40			The group of objects supporting management MLBUNDLES for revision 5.0 on the Alcatel 7x50 SR series systems.
tmnxMlBundleGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.48			The group of objects supporting management MLBUNDLES for revision 6.0 on the Alcatel 7x50 SR series systems.
tmnxMlBundleV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.27			The group of objects supporting management MLBUNDLES for revision 3.0 on the Alcatel 7x50 SR series systems.
tmnxMlImaBundleGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.33			The group of objects supporting management of Ima Groups and Members on the Alcatel 7x50 SR series systems.
tmnxMlpppBundleGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.49			The group of objects supporting management of MLPPP Bundles on the Alcatel 7x50 SR series systems.
tmnxNamedPoolGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.55			The group of objects supporting the Named Pool feature for revision 6.0 on Alcatel 7x50 SR series systems.
tmnxObsoleteGroupV3v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.28			The group of objects obsoleted in the 7x50 SR series 3.0 release
tmnxObsoleteGroupV5v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.36			The group of objects obsoleted in the 7x50 SR series 5.0 release
tmnxPortATMGroupV4v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.31			The group of objects supporting management of ATM interfaces for version 4.0 on Alcatel 7x50 SR series systems.
tmnxPortATMV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.23			The group of objects supporting management of ATM interfaces for version 3.0 on Alcatel 7x50 SR series systems.
tmnxPortCemGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.44			The group of objects supporting management of CEM encapsulation TDM type ports specific to the Alcatel 7750 and 7710 SR series systems for revision 6.0.
tmnxPortComp7450	1.3.6.1.4.1.6527.3.1.1.2.2.1.4
tmnxPortComp7450V4v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.4.2			The compliance statement for revision 4.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7450 SR series systems.
tmnxPortComp7450V5v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.4.3			The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7450 SR series systems.
tmnxPortComp7450V6v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.4.4			The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7450 SR series systems.
tmnxPortComp7710	1.3.6.1.4.1.6527.3.1.1.2.2.1.5
tmnxPortComp7710V3v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.5.1			The compliance statement for revision 3.0 of ALCATEL-IND1-TIMETRA-PORT-MIB.
tmnxPortComp7710V5v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.5.2			The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB.
tmnxPortComp7710V6v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.5.3			The compliance statement for revision 6.0 of ALCATEL-IND1-TIMETRA-PORT-MIB.
tmnxPortComp7750	1.3.6.1.4.1.6527.3.1.1.2.2.1.3
tmnxPortComp7750V4v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.3.2			The compliance statement for revision 4.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7750 SR series systems. tmnxMlImaBundleGroup was added as of R4.
tmnxPortComp7750V5v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.3.3			The compliance statement for revision 5.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7750 SR series systems.
tmnxPortComp7750V6v0	1.3.6.1.4.1.6527.3.1.1.2.2.1.3.4			The compliance statement for revision 6.0 of ALCATEL-IND1-TIMETRA-PORT-MIB on the Alcatel 7750 SR series systems.
tmnxPortCompliances	1.3.6.1.4.1.6527.3.1.1.2.2.1
tmnxPortConformance	1.3.6.1.4.1.6527.3.1.1.2.2
tmnxPortConnectTypeEntry	1.3.6.1.4.1.6527.3.1.2.2.4.8.1		not-accessible	Each row entry represents an Alcatel 7x50 SR series port Connector model. Rows in this table are created by the agent at initialization and cannot be created or destroyed by SNMP Get or Set requests.
tmnxPortConnectTypeTable	1.3.6.1.4.1.6527.3.1.2.2.4.8		not-accessible	The Port Connector type table has an entry for each Alcatel 7x50 SR series port connector model.
tmnxPortEntry	1.3.6.1.4.1.6527.3.1.2.2.4.2.1		not-accessible	Each row entry represents a port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM tmnxMDAEntry can be deleted from the tmnxMDATable, its supported tmnxPortEntry rows must be in the proper state for removal.
tmnxPortEtherEntry	1.3.6.1.4.1.6527.3.1.2.2.4.4.1		not-accessible	Each row entry represents an Ethernet port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM card entry can be deleted from the tmnxMDATable, its supported tmnxPortEntry and tmnxPortEtherEntry rows must be in the proper state for removal. The tmnxPortEtherEntry contains attributes that are unique to the Ethernet TmnxPortType.
tmnxPortEthernetV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.29			The group of objects supporting management of Ethernet ports for revision 3.0 on Alcatel 7x50 SR series systems.
tmnxPortEthernetV5v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.38			The group of objects supporting management of Ethernet ports for revision 5.0 on Alcatel 7x50 SR series systems.
tmnxPortEthernetV6v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.47			The group of objects supporting management of Ethernet ports for revision 6.0 on Alcatel 7x50 SR series systems.
tmnxPortEtherTable	1.3.6.1.4.1.6527.3.1.2.2.4.4		not-accessible	The tmnxPortEtherTable has an entry for each Ethernet (faste, gige, xcme or xgige) port on each IOM card in each chassis in the TMNX system.
tmnxPortFCStatsEntry	1.3.6.1.4.1.6527.3.1.2.2.4.9.1		not-accessible	Each row entry represents a set of ingress and egress packet and octet statistics for the given network port and forwarding class. Rows in this table are created by the agent when the network port is provisioned and cannot be created or destroyed by SNMP Get or Set requests.
tmnxPortFCStatsTable	1.3.6.1.4.1.6527.3.1.2.2.4.9		not-accessible	The Network Port FC Stats table has an entry for each forwarding class defined on each network port.
tmnxPortFRGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.5			The group of objects supporting management of Frame Relay DLCMI on Alcatel 7x50 SR series systems.
tmnxPortGroups	1.3.6.1.4.1.6527.3.1.1.2.2.2
tmnxPortGroupV4v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.35			The group of objects supporting management of physical port capabilities for revision 4.0 on Alcatel 7x50 SR series systems.
tmnxPortGroupV5v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.39			The group of objects supporting management of physical port capabilities for revision 5.0 on Alcatel 7x50 SR series systems.
tmnxPortGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.54			The group of objects supporting management of physical port capabilities for revision 6.0 on Alcatel 7x50 SR series systems.
tmnxPortIngrMdaQosStatEntry	1.3.6.1.4.1.6527.3.1.2.2.4.17.1		not-accessible	Each row entry indicates the MDA QoS discard statistics for an ethernet port located on an oversubscribed MDA. tmnxPortEtherIngressRate object in the tmnxPortEtherTable indicates the ingress rate configured for the port.
tmnxPortIngrMdaQosStatR2r1Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.14			The group of objects that describe the MDA QoS discard statistics for an ethernet port located on an oversubscribed MDA for revision 2.1 on Alcatel 7x50 SR series systems.
tmnxPortIngrMdaQosStatTable	1.3.6.1.4.1.6527.3.1.2.2.4.17		not-accessible	The table tmnxPortIngrMdaQosStatTable contains a row for each ethernet port located on an oversubscribed MDA.
tmnxPortMIBModule	1.3.6.1.4.1.6527.1.1.3.25			This document is the SNMP MIB module to manage and provision the hardware components of the Alcatel 7x50 device. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tmnxPortNetEgressStatsEntry	1.3.6.1.4.1.6527.3.1.2.2.12.2.1		not-accessible	Defines an entry in tmnxPortNetEgressStatsTable. Entries are created and deleted by the system depending on the queue policy being used at the specific port.
tmnxPortNetEgressStatsTable	1.3.6.1.4.1.6527.3.1.2.2.12.2		not-accessible	Defines the Alcatel 7x50 SR series network port egress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical queues being used for the ports to forward the network egress traffic.
tmnxPortNetIngressStatsEntry	1.3.6.1.4.1.6527.3.1.2.2.12.1.1		not-accessible	Defines an entry in tmnxPortNetIngressStatsTable. Entries are created and deleted by the system depending on the queue policy being used at the specific port.
tmnxPortNetIngressStatsTable	1.3.6.1.4.1.6527.3.1.2.2.12.1		not-accessible	Defines the Alcatel 7x50 SR series network port ingress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical queues being used for the ports to forward the network ingress traffic.
tmnxPortNotification	1.3.6.1.4.1.6527.3.1.3.2.2.0
tmnxPortNotificationGroupR2r1	1.3.6.1.4.1.6527.3.1.1.2.2.2.17			The group of notifications supporting the management of physical ports for revision 2.1 on Alcatel 7x50 SR series systems.
tmnxPortNotificationGroupV3v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.50			The group of notifications supporting the management of physical ports for revision 3.0 on Alcatel 7x50 SR series systems.
tmnxPortNotificationGroupV5v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.41			The group of notifications supporting the management of physical ports for revision 5.0 on Alcatel 7x50 SR series systems.
tmnxPortNotificationGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.46			The group of notifications supporting the management of physical ports for revision 6.0 on Alcatel 7x50 SR series systems.
tmnxPortNotificationObjects	1.3.6.1.4.1.6527.3.1.2.2.7
NTF tmnxPortNotifyBerSdTca	1.3.6.1.4.1.6527.3.1.3.2.2.0.12			Generated when a SONET/SDH port's signal degradation bit error rate is greater than the configured error rate threshold. This notification was made obsolete in the 2.1 release.
NTF tmnxPortNotifyBerSfTca	1.3.6.1.4.1.6527.3.1.3.2.2.0.13			Generated when a SONET/SDH port's signal failure bit error rate is greater than the configured error rate threshold. This notification was made obsolete in the 2.1 release.
tmnxPortNotifyObjsGroupR2r1	1.3.6.1.4.1.6527.3.1.1.2.2.2.18			The group of objects supporting physical port notifications for revision 2.1 on Alcatel 7x50 SR series systems.
tmnxPortNotifyObjsGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.57			The group of objects supporting physical port notifications for revision 6.0 on Alcatel 7x50 SR series systems.
tmnxPortNotifyObsoleteGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.20			The group of notifications supporting the management of physical ports made obsolete for revision 2.1 on Alcatel 7x50 SR series systems. tmnxEqPortSFPCorrupted was made obsolete for revision 6.0 on Alcatel 7x50 SR series systems.
tmnxPortNotifyPrefix	1.3.6.1.4.1.6527.3.1.3.2.2
tmnxPortObjs	1.3.6.1.4.1.6527.3.1.2.2.4
tmnxPortObsoleteGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.11			The group of objects in ALCATEL-IND1-TIMETRA-PORT-MIB which are obsoleted.
tmnxPortScalarObjs	1.3.6.1.4.1.6527.3.1.2.2.4.19
tmnxPortSchedOverrideEntry	1.3.6.1.4.1.6527.3.1.2.2.4.24.1		not-accessible	Each row represents a particular port-scheduler override. Entries are created and deleted by the user.
tmnxPortSchedOverrideTable	1.3.6.1.4.1.6527.3.1.2.2.4.24		not-accessible	The tmnxPortSchedOverrideTable has an entry for each port scheduler override configured on this system.
tmnxPortSchedV5v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.37			The group of objects supporting management of physical port virtual scheduler capabilities for revision 5.0 on Alcatel 7x50 SR series systems.
tmnxPortSonetV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.21			The group of objects supporting management of SONET type ports for revision 3.0 on Alcatel 7x50 SR series systems.
tmnxPortStatsObjs	1.3.6.1.4.1.6527.3.1.2.2.12
tmnxPortStatsR2r1Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.16			The group of objects supporting port statistics for revision 2.1 on Alcatel 7x50 SR series systems.
tmnxPortTable	1.3.6.1.4.1.6527.3.1.2.2.4.2		not-accessible	The port table has an entry for each port on each IOM card in each chassis in the TMNX system.
tmnxPortTDMGroupV4v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.30			The group of objects supporting management of TDM type ports for version 4.0 on the Alcatel 7x50 SR series systems.
tmnxPortTDMGroupV5v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.42			The group of objects supporting management of TDM type ports for version 5.0 on the Alcatel 7x50 SR series systems.
tmnxPortTDMGroupV6v0	1.3.6.1.4.1.6527.3.1.1.2.2.2.52			The group of objects supporting management of TDM type ports for version 6.0 on the Alcatel 7x50 SR series systems.
tmnxPortTDMV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.22			The group of objects supporting management of TDM type ports for revision 3.0 on the Alcatel 7x50 SR series systems.
tmnxPortTestEntry	1.3.6.1.4.1.6527.3.1.2.2.4.3.1		not-accessible	Each row entry represents a port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations.
tmnxPortTestGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.7			The group of objects supporting management of port testing on Alcatel 7x50 SR series system.
tmnxPortTestTable	1.3.6.1.4.1.6527.3.1.2.2.4.3		not-accessible	The tmnxPortTestTable has an entry for each port on each IOM card in each chassis in the TMNX system.
tmnxPortToChannelEntry	1.3.6.1.4.1.6527.3.1.2.2.4.16.1		not-accessible	Each row represents a mapping of the physical port index and the channel index string to the index of the channel.
tmnxPortToChannelTable	1.3.6.1.4.1.6527.3.1.2.2.4.16		not-accessible	The tmnxPortToChannelTable is a mapping table. Given a chassis index, physical port index and channel string, it maps it to the index of the channel. This channel index can then be used as an index into the ifTable or the tmnxPortTable.
tmnxPortTypeEntry	1.3.6.1.4.1.6527.3.1.2.2.4.7.1		not-accessible	Each row entry represents an Alcatel 7x50 SR series port model. Rows in this table are created by the agent at initialization and cannot be created or destroyed by SNMP Get or Set requests.
tmnxPortTypeTable	1.3.6.1.4.1.6527.3.1.2.2.4.7		not-accessible	The Port type table has an entry for each Alcatel 7x50 SR series port model.
tmnxPortV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.25			The group of objects supporting management of physical port capabilities for revision 3.0 on Alcatel 7x50 SR series systems.
tmnxQosAppObjs	1.3.6.1.4.1.6527.3.1.2.2.10
tmnxQosAppObjsGroup	1.3.6.1.4.1.6527.3.1.1.2.2.2.6			The group of objects supporting management of Qos associations of the buffer pools to mdas, ports, channels and bundles on Alcatel 7x50 SR series systems.
tmnxQosPoolAppEntry	1.3.6.1.4.1.6527.3.1.2.2.10.2.1		not-accessible	This entry maintains the specifics about the association of a buffer pool and an object.
tmnxQosPoolAppTable	1.3.6.1.4.1.6527.3.1.2.2.10.2		not-accessible	This table maintains associations of the buffer pools with the individual objects.
NTF tmnxQosServiceDegraded	1.3.6.1.4.1.6527.3.1.3.2.2.0.3			Generated when the port is unable to provided the specified quality of service level.
tmnxScalarPortV3v0Group	1.3.6.1.4.1.6527.3.1.1.2.2.2.24			The group of objects supporting management for general port settings for revision 3.0 on Alcatel 7x50 series systems.
tmnxSonetEntry	1.3.6.1.4.1.6527.3.1.2.2.4.5.1		not-accessible	Each row entry represents a packet over Sonet port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM tmnxMDAEntry can be deleted from the tmnxMDATable, its supported tmnxPortEntry rows must be in the proper state for removal. The tmnxSonetEntry contains attributes that are unique to the 'sonet' TmnxPortType. It also contains attributes that are common to all sonet paths configured on a sonet port. The tmnxPortPortID for a sonet port includes a sonet path number in the lower bits. If the sonet path number is zero, '0', it represents a single (clear) sonet path on the port that uses the full bandwidth of the sonet port. All entries in this table have the sonet path number part of their tmnxPortPortID index value set to zero.
tmnxSonetGroupEntry	1.3.6.1.4.1.6527.3.1.2.2.4.18.1		not-accessible	Each row entry represents a Tributary Unit Group(TUG3) on a path.
tmnxSonetGroupTable	1.3.6.1.4.1.6527.3.1.2.2.4.18		not-accessible	The tmnxSonetGroupTable has an entry for each Tributary Unit Group(TUG3) on a path. On a port which supports unchannelized STS-3's, rows in this table are created when a channelized STS-3 has its tmnxSonetPathChildType set to sdhTug3. On a port which does not support unchannelized STS-3's, the rows in this table are implicitly created when a STS-3 is created in the tmnxSonetPathTable. Entries in this table are implicitly deleted when the parent entry of this group is deleted from the tmnxSonetPathTable or if the tmnxSonetPathChildType of the parent is set to something other than sdhTug3.
tmnxSonetPathEntry	1.3.6.1.4.1.6527.3.1.2.2.4.6.1		not-accessible	Each row entry represents a configured sonet path in a packet over Sonet port on a IOM card in a chassis in the system. The tmnxSonetPathEntry contains attributes that are unique to a sonet path of a 'sonet' TmnxPortType. The tmnxPortPortID for a sonet port includes a sonet path number in the lower bits. If the sonet path number is zero, '0', it represents a single (clear) sonet path on the port that uses the full bandwidth of the sonet port. Entries in this table that have the sonet path number part of their tmnxPortPortID index value set to zero cannot be created and deleted via SNMP SET operations. They are created by the SNMP agent when the corresponding entry in the tmnxSonetTable is created. Entries with non-zero sonet path numbers can be created and deleted via SNMP SET operations using tmnxSonetPathRowStatus. When a row is created in the tmnxSonetPathTable, the agent also creates a row with the same index values in the tmnxPortTable. In order to delete an entry, tmnxPortAdminStatus must first be set to 'outOfService'. When the tmnxSonetPathEntry is deleted, the agent also deletes the corresponding row in the tmnxPortTable.
tmnxSonetPathTable	1.3.6.1.4.1.6527.3.1.2.2.4.6		not-accessible	The tmnxSonetPathTable has an entry for each sonet path configured in each packet over Sonet port on each IOM card in each chassis in the TMNX system.
NTF tmnxSonetSDHLoopbackStarted	1.3.6.1.4.1.6527.3.1.3.2.2.0.28			The tmnxSonetSDHLoopbackStarted notification is generated when a loopback is provisioned on a Sonet-SDH port.
NTF tmnxSonetSDHLoopbackStopped	1.3.6.1.4.1.6527.3.1.3.2.2.0.29			The tmnxSonetSDHLoopbackStopped notification is generated when a loopback test is removed on a Sonet-SDH port. The value of tmnxDS1Loopback specifies the type of loopback that was configured and has now been removed.
tmnxSonetTable	1.3.6.1.4.1.6527.3.1.2.2.4.5		not-accessible	The tmnxSonetTable has an entry for each packet over Sonet port on each IOM card in each chassis in the TMNX system.

RFC description

Manages port hardware components and provisioning for Alcatel 7x50 telecom service routers.

Start monitoring Alcatel-Lucent service routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-TIMETRA-PORT-MIB

This MIB depends on

Related MIBs

What Is ALCATEL-IND1-TIMETRA-PORT-MIB?

What Can Be Monitored

Supported Devices

Monitoring Examples

RFC description