BLADETYPE5-NETWORK-MIB

All MIBs › BLADETYPE5-NETWORK-MIB

Category: Network Interfaces, Vendor: HP/HPE

Description: Manages network interface configuration and statistics for HP BladeSystem Type 5 server blade modules.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BLADETYPE5-NETWORK-MIB?

BLADETYPE5-NETWORK-MIB is an HP (ProCurve/Aruba blade-switch heritage) proprietary MIB reporting hardware inventory and per-port operational status for the Bladetype5 embedded blade switch. Its objects cover hardware part number/revision/serial number, a port-operational table (state, RMON enable), a per-port 802.1x table (index, reset/reauth actions), an NTP send-request trigger, and a port-info table (speed, mode, flow control, link state, physical interface description/type/MTU/physical address). As a hardware/status MIB it lets an administrator confirm per-port link state and 802.1x status on an HP Bladetype5 blade switch. It is deployed on HP blade-server embedded switch modules (Bladetype5). Engineers can download the BLADETYPE5-NETWORK-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BLADETYPE5-NETWORK-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP blade-server embedded switch modules (Bladetype5)

Monitoring Examples

An administrator checks portInfoLink and portOperDot1xTable per port to confirm link state and 802.1x authentication status on an HP Bladetype5 blade switch module.

What Can Be Monitored

per-port link status and 802.1x authentication state

Imported Objects

From BRIDGE-MIB

BridgeId

From HP-SWITCH-PL-MIB

hpSwitchBladeType5-Mgmt
hpSwitchBladeType5-Products

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

ifIndex
sysContact
sysLocation
sysName

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
PhysAddress

How to Use in IPNetwork Monitor

Example using pktStatsAllocs OID:

Select an HP BladeSystem Type 5 embedded blade switch module as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type pktStatsAllocs into the Find box to locate it in the OID tree, then select it and click OK. It reports the total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
acConfig	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1
acl	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9
aclCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4
INT aclClearStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.12.1.1.3	INTEGER	read-write	Setting this value to clear(2) clears the stats for the ACL.
INT aclCurCfg8021pPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.17	INTEGER	read-only	The 802.1p priority to be filtered.
IP aclCurCfgDstIPAddress	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.22	IpAddress	read-only	The destination IP address to be filtered.
IP aclCurCfgDstIPMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.23	IpAddress	read-only	The address mask applied to aclCurCfgDstIPAddress for filtering.
MAC aclCurCfgDstMACAddress	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.11	MacAddress	read-only	The destination MAC address to be filtered.
MAC aclCurCfgDstMACMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.12	MacAddress	read-only	The address mask applied to aclCurCfgDstMACAddress for filtering.
INT aclCurCfgDstPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.26	INTEGER	read-only	The destination TCP/UDP port number to be filtered.
STR aclCurCfgDstPortMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.27	DisplayString	read-only	The mask applied to aclCurCfgDstPort for filtering.
OCT aclCurCfgEgressPorts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.29	OCTET STRING	read-only	The port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \| \|\| \|\| \|_ port 9 \|\| \|\| \|\| \|\|___ port 8 \|\| \|____ port 7 \|\| . . . \|\|_________ port 2 \|__________ port 1 where x: 1 - the represented port is configured for filtering. 0 - the represented port is not configured for filtering.
aclCurCfgEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1		not-accessible	Current information about a particular ACL configuration entry.
INT aclCurCfgEthernetTypeName	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.13	INTEGER	read-only	The Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be filtered.
INT aclCurCfgEthernetTypeValue	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.14	INTEGER	read-only	The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthernetTypeName is other(7), which can be any user-defined value for this object.
INT aclCurCfgEthFmt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.6	INTEGER	read-only	The packet ethernet format to be filtered.
INT aclCurCfgFilterAction	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.4	INTEGER	read-only	The action to be performed on a packet that matches the filter settings of this ACL entry.
INT aclCurCfgFilterActionSetPrio	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.5	INTEGER	read-only	The value to be used when the action to be performed is setprio for this ACL entry.
U32 aclCurCfgGroup	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.3	Unsigned32	read-only	The index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group.
U32 aclCurCfgIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.1	Unsigned32	not-accessible	The index associated with this ACL entry.
INT aclCurCfgInprofDscp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.46	INTEGER	read-only	Set in profile pkts DSCP value.
INT aclCurCfgInprofDscpEnable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.50	INTEGER	read-only	Whether in profile update DSCP for this ACL is enabled or not.
INT aclCurCfgInprofTos	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.47	INTEGER	read-only	To enable/disable setting in profile pkts based on TOS bits.
INT aclCurCfgInprofUser	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.45	INTEGER	read-only	Set in profile user defined priority for this ACL.
INT aclCurCfgInprofUserEnable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.49	INTEGER	read-only	Set in profile update method for this ACL.
INT aclCurCfgIPFmt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.8	INTEGER	read-only	The packet IP format to be filtered.
INT aclCurCfgKbitsBurst	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.44	INTEGER	read-only	The maxmium burst sizeof meter associated with this ACL entry.
U32 aclCurCfgKbitsSec	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.43	Unsigned32	read-only	The commited rate of meter associated with this ACL entry.
INT aclCurCfgMeterAction	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.41	INTEGER	read-only	Meter Action for this ACL.
INT aclCurCfgMeterEnable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.42	INTEGER	read-only	Meter state for this ACL.
INT aclCurCfgOutprofDscp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.48	INTEGER	read-only	Set out profile pkts DSCP value.
INT aclCurCfgOutprofDscpEnable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.51	INTEGER	read-only	Whether out profile update DSCP for this ACL is enabled or not.
OCT aclCurCfgPortAclBmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.1.1.2	OCTET STRING	read-only	The acls applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ acl 9 \|\| \|\| \|\| \|\|___ acl 8 \|\| \|____ acl 7 \|\| . . . \|\|_________ acl 2 \|__________ acl 1 where x : 1 - The represented acl applied to the port. 0 - The represented acl not applied to the port.
OCT aclCurCfgPortAclGrpBmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.1.1.4	OCTET STRING	read-only	The acl groups applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ aclgrp 9 \|\| \|\| \|\| \|\|___ aclgrp 8 \|\| \|____ aclgrp 7 \|\| . . . \|\|_________ aclgrp 2 \|__________ aclgrp 1 where x : 1 - The represented acl applied to the port. 0 - The represented acl not applied to the port.
I32 aclCurCfgPortIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.1.1.1	Integer32	read-only	The identifier of a particular port. This is also index to the entLogicalTable of Entity MIB.
aclCurCfgPortTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.1		not-accessible	The table of port acl groups configuration.
aclCurCfgPortTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.1.1		not-accessible	Information about a particular port acl configuration.
STR aclCurCfgProtocol	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.19	DisplayString	read-only	The protocol to be filtered.
IP aclCurCfgSrcIPAddress	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.20	IpAddress	read-only	The source IP address to be filtered.
IP aclCurCfgSrcIPMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.21	IpAddress	read-only	The address mask applied to aclCurCfgSrcIPAddress for filtering.
MAC aclCurCfgSrcMACAddress	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.9	MacAddress	read-only	The source MAC address to be filtered.
MAC aclCurCfgSrcMACMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.10	MacAddress	read-only	The address mask applied to aclCurCfgSrcMACAddress for filtering.
INT aclCurCfgSrcPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.24	INTEGER	read-only	The source TCP/UDP port number to be filtered.
STR aclCurCfgSrcPortMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.25	DisplayString	read-only	The mask applied to aclCurCfgSrcPort for filtering.
INT aclCurCfgStatistics	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.30	INTEGER	read-only	Whether statistics collection for this ACL is enabled or not.
aclCurCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1		not-accessible	The table of current ACL configuration.
INT aclCurCfgTagFmt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.7	INTEGER	read-only	The packet tag format to be filtered.
BIT aclCurCfgTCPFlags	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.28	Bits	read-only	The TCP flags to be filtered. OCTET xxxxxxxx \|\|\|\|..\|\| \|\|\|\|..\|\|_tcpFIN(7) \|\|\|\|..\|__tcpSYN(6) \|\|\|\| \|\|\|\|_____tcpACK(3) \|\|\|______tcpURG(2) \|\|_______reserved2(1) \|________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
BIT aclCurCfgTCPFlagsMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.39	Bits	read-only	The TCP flags mask. OCTET xxxxxxxx \|\|\|\|..\|\| \|\|\|\|..\|\|_tcpFIN(7) \|\|\|\|..\|__tcpSYN(6) \|\|\|\| \|\|\|\|_____tcpACK(3) \|\|\|______tcpURG(2) \|\|_______reserved2(1) \|________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
STR aclCurCfgTypeOfService	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.18	DisplayString	read-only	The type of service to be filtered.
INT aclCurCfgVLanId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.15	INTEGER	read-only	The virtual LAN identifier to be filtered.
STR aclCurCfgVLanMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.16	DisplayString	read-only	The mask applied to aclCurCfgVLanId for filtering.
aclGroup	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3
aclGroupCurCfgEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.1.1		not-accessible	Information about a particular ACL configuration.
U32 aclGroupCurCfgIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.1.1.1	Unsigned32	read-only	The index associated with this ACL Group entry.
OCT aclGroupCurCfgMemberAcls	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.1.1.2	OCTET STRING	read-only	The ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \| \|\| \|\| \|_ ACL 9 \|\| \|\| \|\| \|\|___ ACL 8 \|\| \|____ ACL 7 \|\| . . . \|\|_________ ACL 2 \|__________ ACL 1 where x: 1 - the represented ACL is a member of the group. 0 - the represented ACL is not a member of the group.
aclGroupCurCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.1		not-accessible	The table of current ACL Group configuration.
U32 aclGroupNewCfgAddAcl	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.2.1.4	Unsigned32	read-write	The index of the ACL entry to be added into this ACL group. A successful set operation on this object will also set the bit corresponding to the ACL entry in the aclGroupNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read.
INT aclGroupNewCfgDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.2.1.8	INTEGER	read-write	This is an action object to delete an ACL group. A value of other(1) is always returned when this object is read.
aclGroupNewCfgEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.2.1		not-accessible	New information about a particular ACL configuration.
U32 aclGroupNewCfgIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.2.1.1	Unsigned32	read-only	The index associated with this ACL Group entry.
OCT aclGroupNewCfgMemberAcls	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.2.1.2	OCTET STRING	read-only	The ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \| \|\| \|\| \|_ ACL 9 \|\| \|\| \|\| \|\|___ ACL 8 \|\| \|____ ACL 7 \|\| . . . \|\|_________ ACL 2 \|__________ ACL 1 where x: 1 - the represented ACL is a member of the group. 0 - the represented ACL is not a member of the group.
U32 aclGroupNewCfgRemoveAcl	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.2.1.5	Unsigned32	read-write	The index of the ACL entry to be removed from this ACL group. A successful set operation on this object will unset the bit corresponding to the ACL entry in the aclGroupNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read.
aclGroupNewCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.2		not-accessible	The table of new ACL Group configuration.
acList	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1
INT aclNewCfg8021pPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.17	INTEGER	read-write	The 802.1p priority to be filtered.
INT aclNewCfgAddEgressPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.31	INTEGER	read-write	The port to be added to the specified ACL for egress filtering. A value of zero is always returned when this object is read.
INT aclNewCfgDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.33	INTEGER	read-write	This is an action object to delete an ACL entry. A value of other(1) is always returned when this object is read.
IP aclNewCfgDstIPAddress	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.22	IpAddress	read-write	The destination IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstIPMask object, if not yet set, will be automatically set to 255.255.255.255.
IP aclNewCfgDstIPMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.23	IpAddress	read-write	The address mask to be applied to aclNewCfgDstIPAddress for filtering.
MAC aclNewCfgDstMACAddress	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.11	MacAddress	read-write	The destination MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstMACMask object, if not yet set, will be automatically set to ff:ff:ff:ff:ff.
MAC aclNewCfgDstMACMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.12	MacAddress	read-write	The address mask to be applied to aclNewCfgDstMACAddress for filtering.
INT aclNewCfgDstPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.26	INTEGER	read-write	The destination TCP/UDP port number to be filtered. Whenever this object is set the aclNewCfgSrcPortMask object, if not yet set, will be automatically set to 65535 (0xffff).
STR aclNewCfgDstPortMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.27	DisplayString	read-write	The mask to be applied to aclNewCfgDstPort for filtering.
OCT aclNewCfgEgressPorts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.29	OCTET STRING	read-only	The port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \| \|\| \|\| \|_ port 9 \|\| \|\| \|\| \|\|___ port 8 \|\| \|____ port 7 \|\| . . . \|\|_________ port 2 \|__________ port 1 where x: 1 - the represented port is configured for filtering. 0 - the represented port is not configured for filtering.
aclNewCfgEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1		not-accessible	New information about a particular ACL configuration.
INT aclNewCfgEthernetReset	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.53	INTEGER	read-write	This is an action object to reset an ACL Ethernet entry. A value of other(1) is always returned when this object is read.
INT aclNewCfgEthernetTypeName	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.13	INTEGER	read-write	The Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be filtered. If this object is set to a value other than other(7), the value of the aclNewCfgEthernetTypeValue object is automatically set, as follows: aclNewCfgEthernetTypeName aclNewCfgEthernetTypeValue none(0) 0 arp(1) 2054 (0x0806) ipv4(2) 2048 (0x0800) ipv6(3) 34525 (0x86dd) mpls(4) 34887 (0x8847) rarp(5) 32821 (0x8035) any(6) 65535 (0xffff)
INT aclNewCfgEthernetTypeValue	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.14	INTEGER	read-write	The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthernetTypeName is other(7), which can be any user-defined value for this object.
INT aclNewCfgEthFmt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.6	INTEGER	read-write	The packet ethernet format to be filtered.
INT aclNewCfgFilterAction	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.4	INTEGER	read-write	The action to be performed on a packet that matches the filter settings of this ACL entry.
INT aclNewCfgFilterActionSetPrio	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.5	INTEGER	read-write	The COS queue to be used when the action for this ACL entry is set to setprio.
U32 aclNewCfgGroup	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.3	Unsigned32	read-only	The index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group.
U32 aclNewCfgIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.1	Unsigned32	read-only	The index associated with this ACL entry.
INT aclNewCfgInprofDscp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.46	INTEGER	read-write	Set in profile pkts DSCP value.
INT aclNewCfgInprofDscpEnable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.50	INTEGER	read-write	Whether in profile update DSCP for this ACL is enabled or not.
INT aclNewCfgInprofTos	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.47	INTEGER	read-write	To enable/disable setting in profile pkts based on TOS bits.
INT aclNewCfgInprofUser	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.45	INTEGER	read-write	Set in profile user defined priority for this ACL.
INT aclNewCfgInprofUserEnable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.49	INTEGER	read-write	Set in profile update method for this ACL.
INT aclNewCfgIPFmt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.8	INTEGER	read-write	The packet IP format to be filtered.
INT aclNewCfgIpv4Reset	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.54	INTEGER	read-write	This is an action object to reset an ACL IPV4 entry. A value of other(1) is always returned when this object is read.
INT aclNewCfgKbitsBurst	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.44	INTEGER	read-write	The maxmium burst sizeof meter associated with this ACL entry.
U32 aclNewCfgKbitsSec	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.43	Unsigned32	read-write	The commited rate of meter associated with this ACL entry.
INT aclNewCfgMeterAction	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.41	INTEGER	read-write	Meter Action for this ACL.
INT aclNewCfgMeterEnable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.42	INTEGER	read-write	Meter state for this ACL.
INT aclNewCfgMeterReset	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.56	INTEGER	read-write	This is an action object to reset an ACL Meter entry. A value of other(1) is always returned when this object is read.
INT aclNewCfgOutprofDscp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.48	INTEGER	read-write	Set out profile pkts DSCP value.
INT aclNewCfgOutprofDscpEnable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.51	INTEGER	read-write	Whether out profile update DSCP for this ACL is enabled or not.
INT aclNewCfgPktfmtReset	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.60	INTEGER	read-write	This is an action object to reset an ACL Pktfmt entry. A value of other(1) is always returned when this object is read.
OCT aclNewCfgPortAclBmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.2.1.8	OCTET STRING	read-only	The acls applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ acl 9 \|\| \|\| \|\| \|\|___ acl 8 \|\| \|____ acl 7 \|\| . . . \|\|_________ acl 2 \|__________ acl 1 where x : 1 - The represented acl applied to the port. 0 - The represented acl not applied to the port.
OCT aclNewCfgPortAclGrpBmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.2.1.10	OCTET STRING	read-only	The acl groups applied to the port. The acl groups are presented in bitmap format. This string displays group number from 1 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ aclgrp 9 \|\| \|\| \|\| \|\|___ aclgrp 8 \|\| \|____ aclgrp 7 \|\| . . . \|\|_________ aclgrp 2 \|__________ aclgrp 1 where x : 1 - The represented acl group applied to the port. 0 - The represented acl group not applied to the port.
U32 aclNewCfgPortAddAcl	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.2.1.2	Unsigned32	read-write	The acl to be added to the specified port. A '0' value is returned when read.
U32 aclNewCfgPortAddAclGrp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.2.1.4	Unsigned32	read-write	The acl group to be added to the specified port. A '0' value is returned when read.
I32 aclNewCfgPortIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.2.1.1	Integer32	read-only	The identifier of a particular port. This is also index to the entLogicalTable of Entity MIB.
U32 aclNewCfgPortRemoveAcl	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.2.1.5	Unsigned32	read-write	The acl to be removed from the specified port. A '0' value is returned when read.
U32 aclNewCfgPortRemoveAclGrp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.2.1.7	Unsigned32	read-write	The acl group to be removed from the specified port. A '0' value is returned when read.
aclNewCfgPortTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.2		not-accessible	The table of port acl configuration.
aclNewCfgPortTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.2.1		not-accessible	Information about a particular port acl groups configuration.
STR aclNewCfgProtocol	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.19	DisplayString	read-write	The protocol to be filtered.
INT aclNewCfgRemarkInprofReset	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.58	INTEGER	read-write	This is an action object to reset an ACL Remark Inprof entry. A value of other(1) is always returned when this object is read.
INT aclNewCfgRemarkOutprofReset	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.59	INTEGER	read-write	This is an action object to reset an ACL Remark Outprof entry. A value of other(1) is always returned when this object is read.
INT aclNewCfgRemarkReset	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.57	INTEGER	read-write	This is an action object to reset an ACL Remark entry. A value of other(1) is always returned when this object is read.
U32 aclNewCfgRemoveEgressPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.32	Unsigned32	read-write	The port to be removed from the specified ACL. A value of zero is always returned when this object is read.
INT aclNewCfgReset	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.52	INTEGER	read-write	This is an action object to reset an ACL entry. A value of other(1) is always returned when this object is read.
IP aclNewCfgSrcIPAddress	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.20	IpAddress	read-write	The source IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set, will be automatically set to 255.255.255.255.
IP aclNewCfgSrcIPMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.21	IpAddress	read-write	The address mask to be applied to aclNewCfgSrcIPAddress for filtering.
MAC aclNewCfgSrcMACAddress	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.9	MacAddress	read-write	The source MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcMACMask object, if not yet set, will be automatically set to ff:ff:ff:ff:ff.
MAC aclNewCfgSrcMACMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.10	MacAddress	read-write	The address mask to be applied to aclNewCfgSrcMACAddress for filtering.
INT aclNewCfgSrcPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.24	INTEGER	read-write	The source TCP/UDP port number to be filtered. Whenever this object is set if the aclNewCfgSrcPortMask object is not set will be automatically set to 65535 (0xffff).
STR aclNewCfgSrcPortMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.25	DisplayString	read-write	The mask to be applied to aclNewCfgSrcPort for filtering.
INT aclNewCfgStatistics	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.30	INTEGER	read-write	Whether statistics collection for this ACL is enabled or not.
aclNewCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2		not-accessible	The table of new ACL configuration.
INT aclNewCfgTagFmt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.7	INTEGER	read-write	The packet tagging format to be filtered.
BIT aclNewCfgTCPFlags	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.28	Bits	read-write	The TCP flags to be filtered. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx \|\|\|\|..\|\| \|\|\|\|..\|\|_tcpFIN(7) \|\|\|\|..\|__tcpSYN(6) \|\|\|\| \|\|\|\|_____tcpACK(3) \|\|\|______tcpURG(2) \|\|_______reserved2(1) \|________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1;
BIT aclNewCfgTCPFlagsMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.39	Bits	read-write	The TCP flags mask. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx \|\|\|\|..\|\| \|\|\|\|..\|\|_tcpFIN(7) \|\|\|\|..\|__tcpSYN(6) \|\|\|\| \|\|\|\|_____tcpACK(3) \|\|\|______tcpURG(2) \|\|_______reserved2(1) \|________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1; Default value is 0x3f.
INT aclNewCfgTcpudpReset	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.55	INTEGER	read-write	This is an action object to reset an ACL Tcpudp entry. A value of other(1) is always returned when this object is read.
STR aclNewCfgTypeOfService	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.18	DisplayString	read-write	The type of service to be filtered.
INT aclNewCfgVLanId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.15	INTEGER	read-write	The virtual LAN identifier to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgVLanMask object, if not yet set, will be automatically set to 4095 (0xfff).
STR aclNewCfgVLanMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.16	DisplayString	read-write	The mask to be applied to aclNewCfgVLanId for filtering.
aclStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.12
C32 aclStatsHits	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.12.1.1.2	Counter32	read-only	Total number of hits for this ACL entry
I32 aclStatsIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.12.1.1.1	Integer32	read-only	The acl index.
aclStatsTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.12.1		not-accessible	The table of ACL statistics.
aclStatsTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.12.1.1		not-accessible	Statistics about a particular ACL configuration entry.
agAccess	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12
STR agAccessUserCurCfgName	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2.1.3	DisplayString	read-only	The user name.
STR agAccessUserCurCfgPswd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2.1.4	DisplayString	read-only	The character string representing the user passworde.
INT agAccessUserCurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2.1.5	INTEGER	read-only	Enable or disable a user.
agAccessUserCurCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2		not-accessible	The table of Access user configuration.
agAccessUserCurCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2.1		not-accessible	A row in the Access user configuration table.
I32 agAccessUserCurCfgUId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2.1.1	Integer32	read-only	The User identifier.
INT agAccessUserCurCos	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2.1.2	INTEGER	read-only	The user class of service.
I32 agAccessUserMaxUserID	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.1	Integer32	read-only	The maximum number of Users ID.
INT agAccessUserNewCfgDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1.6	INTEGER	read-create	This is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User
STR agAccessUserNewCfgName	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1.3	DisplayString	read-create	The user name.
STR agAccessUserNewCfgPswd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1.4	DisplayString	read-create	The character string representing the user passworde.
INT agAccessUserNewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1.5	INTEGER	read-create	Enable or disable a user.
agAccessUserNewCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3		not-accessible	The table of Access user configuration.
agAccessUserNewCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1		not-accessible	A row in the Access user configuration table.
I32 agAccessUserNewCfgUId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1.1	Integer32	read-only	The User identifier.
INT agAccessUserNewCos	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1.2	INTEGER	read-create	The user class of service.
agApply	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.8
INT agApplyConfig	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.8.2	INTEGER	read-write	When this object is read the current state is returned. idle(3) indicates that there is no apply in progess. complete(5) indicates that the last apply operation is completed. Setting the value to apply(1), will write all the changes made since the last apply to the current configuration block. If the apply is successful this variable will return the state 'complete' else it will return 'failed'. In case of failure, to read the reason for failure use the agApplyTable.
INT agApplyConfiguration	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.2	INTEGER	read-write	This is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply are written to the new_config block. other(1) is returned when this object ie read.
I32 agApplyIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.8.5.1.1	Integer32	read-only	The table index.
INT agApplyPending	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.8.1	INTEGER	read-only	This object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user then can apply the changes by setting proper value to the object agApplyConfiguration described above.
OCT agApplyString	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.8.5.1.2	OCTET STRING	read-only	A string in the apply table.
agApplyTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.8.5		not-accessible	The table of URL path for URL load balancing in the current_config.
agApplyTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.8.5.1		not-accessible	Information about an URL path for URL load balancing.
I32 agApplyTableSize	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.8.4	Integer32	read-only	The number of strings in the apply table.
STR agBootVer	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.11	DisplayString	read-only	The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available.
agCfgDump	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.5
I32 agCfgDumpIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.5.4.1.1	Integer32	read-only	The table index.
INT agCfgDumpState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.5.2	INTEGER	read-write	When this object is read the current state is returned. idle(2) indicates that there is no dump in progess. complete(4) indicates that the last dump operation is completed. Setting the value to dump(1), will start a new dump operation Dump will show the current configuration. To read the configuration dump use the agCfgDumpTable once the state of this variable returns complete. Once the agCfgDumpTable is read the state should be set back to 'idle' which frees the dump buffer and others can issue a dump command via SNMP.
OCT agCfgDumpString	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.5.4.1.2	OCTET STRING	read-only	A string in the dump table.
agCfgDumpTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.5.4		not-accessible	The table of dump strings.
agCfgDumpTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.5.4.1		not-accessible	An entry in the dump table.
I32 agCfgDumpTableSize	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.5.3	Integer32	read-only	The number of strings in the dump table.
INT agCfgSysDlight	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.53	INTEGER	read-write	Enable/disable daylight savings time.
STR agChassis	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.38	DisplayString	read-only	Chassis serial number.
INT agClearFlashDump	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.36	INTEGER	read-write	This is an action object to clear the FLASH dump. ok(1) is returned when this object is read.
agClearStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.7
INT agClrSyslogMsgs	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.9	INTEGER	read-write	Clears all current Syslog messages.
INT agConfigForNxtReset	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.8	INTEGER	read-write	The configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuration block backup(3)...backup configuration block default(4)..default configuration block
INT agCurBootNxtCliMode	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.66	INTEGER	read-only	Current boot mode.
INT agCurBootNxtCliModePrompt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.78	INTEGER	read-only	Current status of selectable CLI mode prompt.
INT agCurCfgBootp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.29	INTEGER	read-only	Enable or disable the use of BootP, as currently configured in the current_configuration block.
INT agCurCfgConsole	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.23	INTEGER	read-only	Enable or disable console output of syslog messages.
INT agCurCfgDhcp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.70	INTEGER	read-only	Enable or disable the use of DHCP, as currently configured in the current_configuration block.
INT agCurCfgHprompt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.73	INTEGER	read-only	Current status of hprompt.
INT agCurCfgHttpServerPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.17	INTEGER	read-only	The TCP port number that the HTTP server is listening to in the current_configuration block.
INT agCurCfgHttpsServerPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.49	INTEGER	read-only	The TCP port number that the HTTPS server is listening to in the current_configuration block.
I32 agCurCfgIdleCLITimeout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.55	Integer32	read-only	Set idle CLI sessions timeout.
STR agCurCfgLoginBanner	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.19	DisplayString	read-only	The user defined login banner.
STR agCurCfgLoginNotice	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.76	DisplayString	read-only	The user defined login notice.
agCurCfgMgmtNetEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.2.1		not-accessible	A row in the management network definition table.
I32 agCurCfgMgmtNetIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.2.1.1	Integer32	read-only	The index of the Management Network Definition table.
IP agCurCfgMgmtNetMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.2.1.3	IpAddress	read-only	The Management Network Mask in the current_configuration block.
IP agCurCfgMgmtNetSubnet	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.2.1.2	IpAddress	read-only	The Management Network Address in the current_configuration block.
agCurCfgMgmtNetTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.2		not-accessible	The table for Management Network definitions in the current configuration block.
INT agCurCfgNTPResyncInterval	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.4.3	INTEGER	read-only	The NTP Server resync interval in minutes.
IP agCurCfgNTPSecServer	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.4.11	IpAddress	read-only	The Secondary NTP Server Address.
IP agCurCfgNTPServer	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.4.1	IpAddress	read-only	The NTP Server Address.
INT agCurCfgNTPService	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.4.9	INTEGER	read-only	Enable/disable NTP Service.
INT agCurCfgOldDst	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.82	INTEGER	read-only	Enable or disable system DST for US.
INT agCurCfgReminders	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.59	INTEGER	read-only	Current status of reminders feature.
INT agCurCfgSnmpTimeout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.32	INTEGER	read-only	Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user.
INT agCurCfgSyslog2Fac	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.7	INTEGER	read-only	The facility of syslog2 host in the current_configuration block.
IP agCurCfgSyslog2Host	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.3	IpAddress	read-only	The second syslog host IP address, as currently configured in the current_configuration block.
INT agCurCfgSyslog2Sev	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.15	INTEGER	read-only	The severity of syslog2 host in the current configuration block.
INT agCurCfgSyslogFac	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.5	INTEGER	read-only	The facility of syslog host in the current_configuration block.
IP agCurCfgSyslogHost	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.1	IpAddress	read-only	The syslog host IP address, as currently configured in the current_configuration block.
INT agCurCfgSyslogSev	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.13	INTEGER	read-only	The severity of syslog host in the current configuration block.
INT agCurCfgSyslogTrap8021x	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.52	INTEGER	read-only	Enable or disable 802.1 related syslog and SNMP trap, in the new_configuration block.
INT agCurCfgSyslogTrapAll	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.56	INTEGER	read-only	Enable or disable all syslog and SNMP traps, as currently configured in the current_configuration block.
INT agCurCfgSyslogTrapCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.50	INTEGER	read-only	Enable or disable CFG related syslog and SNMP trap, as currently configured in the current_configuration block.
INT agCurCfgSyslogTrapCli	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.8	INTEGER	read-only	Enable or disable CLI generated error syslog and SNMP trap, as currently configured in the current_configuration block.
INT agCurCfgSyslogTrapConsole	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.2	INTEGER	read-only	Enable or disable console syslog and SNMP trap, as currently configured in the current_configuration block.
INT agCurCfgSyslogTrapIp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.32	INTEGER	read-only	Enable or disable IP related syslog and SNMP trap, as currently configured in the current_configuration block.
INT agCurCfgSyslogTrapMgmt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.6	INTEGER	read-only	Enable or disable management(flash, config, login) syslog and SNMP trap, as currently configured in the current_configuration block.
INT agCurCfgSyslogTrapNtp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.26	INTEGER	read-only	Enable or disable NTP syslog and SNMP trap, as currently configured in the current_configuration block.
INT agCurCfgSyslogTrapOspf	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.42	INTEGER	read-only	Enable or disable OSPF related syslog and SNMP trap, as currently configured in the current_configuration block.
INT agCurCfgSyslogTrapRmon	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.46	INTEGER	read-only	Enable or disable rmon related syslog and SNMP trap, as currently configured in the current_configuration block.
INT agCurCfgSyslogTrapSsh	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.20	INTEGER	read-only	Enable or disable SSH, RADIUS syslog and SNMP trap, as currently configured in the current_configuration block.
INT agCurCfgSyslogTrapStg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.10	INTEGER	read-only	Enable or disable spanning tree syslog and SNMP trap, as currently configured in the current_configuration block.
INT agCurCfgSyslogTrapSystem	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.4	INTEGER	read-only	Enable or disable system level syslog and SNMP trap, as currently configured in the current_configuration block.
INT agCurCfgSyslogTrapUfd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.48	INTEGER	read-only	Enable or disable UFD related syslog and SNMP trap, as currently configured in the current_configuration block.
INT agCurCfgSyslogTrapVlan	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.12	INTEGER	read-only	Enable or disable VLAN syslog and SNMP trap, as currently configured in the current_configuration block.
INT agCurCfgSyslogTrapVrrp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.22	INTEGER	read-only	Enable or disable VRRP syslog and SNMP trap, as currently configured in the current_configuration block.
INT agCurCfgSyslogTrapWeb	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.36	INTEGER	read-only	Enable or disable WEBUI related syslog and SNMP trap, as currently configured in the current_configuration block.
INT agCurCfgTelnetServerPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.34	INTEGER	read-only	The TCP port number that the telnet server listens for telnet sessions.
INT agCurCfgTftpServerPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.39	INTEGER	read-only	The TCP port number that the TFTP server is listening to in the current_configuration block.
INT agCurCfgUfdTrap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.57	INTEGER	read-only	The current status of the UFDFO SNMP trap.
INT agCurDaylightSavings	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.51	INTEGER	read-only	The daylight savings location.
agDiff	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.4
I32 agDiffIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.4.4.1.1	Integer32	read-only	The table index.
INT agDiffState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.4.2	INTEGER	read-write	When this object is read the current state is returned. idle(3) indicates that there is no diff in progess. complete(5) indicates that the last diff operation is completed. Setting the value to diff(1), will start a new diff operation Diff compares the new configuration with the current configuration and shows the pending configuration changes. Setting the value to flashdiff(1), will start a new diff operation. flashdiff compares new configuration with the flash configuration. To read the configuration changes use the agDiffTable once the state of this variable returns complete.
OCT agDiffString	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.4.4.1.2	OCTET STRING	read-only	A string in the diff table.
agDiffTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.4.4		not-accessible	The table of URL path for URL load balancing in the current_config.
agDiffTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.4.4.1		not-accessible	Information about an URL path for URL load balancing.
I32 agDiffTableSize	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.4.3	Integer32	read-only	The number of strings in the diff table.
agent	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1
agentConfig	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1
agentInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3
agentOper	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4
agentStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2
INT agHavePanicDump	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.84	INTEGER	read-only	This object, when read, gives the user the information whether a panic dump exist in flash.
STR agImage1Ver	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.12	DisplayString	read-only	The version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image.
STR agImage2Ver	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.13	DisplayString	read-only	The version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image.
INT agImageForNxtReset	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.9	INTEGER	read-write	The software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2
STR agLastSetErrorReason	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.16	DisplayString	read-only	The error reason of the last SET failure.
agLog	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12
INT agMgmtNetClear	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.4	INTEGER	read-write	By setting the value to delete(2), the entire table is cleared.
agMgmtNetConfig	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11
I32 agMgmtNetTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.1	Integer32	read-only	The maximum number of entries in the Management Network Table.
INT agNewBootNxtCliMode	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.67	INTEGER	read-write	Next cli boot mode.
INT agNewBootNxtCliModePrompt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.79	INTEGER	read-write	Next status of selectable CLI mode prompt.
INT agNewCfgBootp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.30	INTEGER	read-write	Enable or disable the use of BootP, in the new_configuration block.
INT agNewCfgConsole	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.24	INTEGER	read-write	Enable or disable console output of syslog messages.
INT agNewCfgDhcp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.71	INTEGER	read-write	Enable or disable the use of DHCP, in the new_configuration block.
INT agNewCfgHprompt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.75	INTEGER	read-write	New status of hpprompt.
INT agNewCfgHttpServerPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.18	INTEGER	read-write	The TCP port number that the HTTP server is listening to in the new_configuration block.
INT agNewCfgHttpsServerPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.50	INTEGER	read-write	The TCP port number that the HTTPS server is listening to in the new_configuration block.
I32 agNewCfgIdleCLITimeout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.56	Integer32	read-write	Set idle CLI sessions timeout.
STR agNewCfgLoginBanner	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.20	DisplayString	read-write	The user defined login banner.
STR agNewCfgLoginNotice	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.77	DisplayString	read-write	The user defined login notice.
INT agNewCfgMgmtNetDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.3.1.4	INTEGER	read-create	By setting the value to delete(2), the entire row is deleted.
agNewCfgMgmtNetEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.3.1		not-accessible	A row in the management network definition table.
I32 agNewCfgMgmtNetIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.3.1.1	Integer32	read-only	The index of the Management Network Definition table.
IP agNewCfgMgmtNetMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.3.1.3	IpAddress	read-create	The Management Network Mask in the new_configuration block.
IP agNewCfgMgmtNetSubnet	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.3.1.2	IpAddress	read-create	The Management Network Address in the new_configuration block.
agNewCfgMgmtNetTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.3		not-accessible	The table for Management Network definitions in the new configuration block.
INT agNewCfgNTPResyncInterval	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.4.4	INTEGER	read-write	The NTP Server resync interval in minutes.
IP agNewCfgNTPSecServer	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.4.12	IpAddress	read-write	The Secondary NTP Server Address.
IP agNewCfgNTPServer	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.4.2	IpAddress	read-write	The NTP Server Address.
INT agNewCfgNTPService	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.4.10	INTEGER	read-write	Enable/disable NTP Service.
INT agNewCfgOldDst	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.83	INTEGER	read-write	Enable or disable system DST for US.
INT agNewCfgReminders	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.60	INTEGER	read-write	Enable or disable reminders feature.
INT agNewCfgSnmpTimeout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.33	INTEGER	read-write	Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user.
INT agNewCfgSyslog2Fac	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.8	INTEGER	read-write	The facility of syslogs host in the new_configuration block.
IP agNewCfgSyslog2Host	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.4	IpAddress	read-write	The second syslog host IP address, in the new_configuration block.
INT agNewCfgSyslog2Sev	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.16	INTEGER	read-write	The severity of syslogs host in the new configuration block.
INT agNewCfgSyslogFac	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.6	INTEGER	read-write	The facility of syslog host in the new_configuration block.
IP agNewCfgSyslogHost	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.2	IpAddress	read-write	The syslog host IP address, in the new_configuration block.
INT agNewCfgSyslogSev	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.14	INTEGER	read-write	The severity of syslog host in the new configuration block.
INT agNewCfgSyslogTrap8021x	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.51	INTEGER	read-write	Enable or disable 802.1 related syslog and SNMP trap, in the new_configuration block.
INT agNewCfgSyslogTrapAll	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.55	INTEGER	read-write	Enable or disable all syslog and SNMP traps, in the new_configuration block.
INT agNewCfgSyslogTrapCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.49	INTEGER	read-write	Enable or disable CFG related syslog and SNMP trap, in the new_configuration block.
INT agNewCfgSyslogTrapCli	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.7	INTEGER	read-write	Enable or disable CLI generated error syslog and SNMP trap, in the new_configuration block.
INT agNewCfgSyslogTrapConsole	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.1	INTEGER	read-write	Enable or disable console syslog and SNMP trap, in the new_configuration block.
INT agNewCfgSyslogTrapIp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.31	INTEGER	read-write	Enable or disable IP related syslog and SNMP trap, in the new_configuration block.
INT agNewCfgSyslogTrapMgmt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.5	INTEGER	read-write	Enable or disable management(flash, config, login) syslog and SNMP trap, in the new_configuration block.
INT agNewCfgSyslogTrapNtp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.25	INTEGER	read-write	Enable or disable NTP syslog and SNMP trap, in the new_configuration block.
INT agNewCfgSyslogTrapOspf	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.41	INTEGER	read-write	Enable or disable OSPF related syslog and SNMP trap, in the new_configuration block.
INT agNewCfgSyslogTrapRmon	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.45	INTEGER	read-write	Enable or disable rmon related syslog and SNMP trap, in the new_configuration block.
INT agNewCfgSyslogTrapSsh	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.19	INTEGER	read-write	Enable or disable SSH, RADIUS syslog and SNMP trap, in the new_configuration block.
INT agNewCfgSyslogTrapStg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.9	INTEGER	read-write	Enable or disable spanning tree syslog and SNMP trap, in the new_configuration block.
INT agNewCfgSyslogTrapSystem	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.3	INTEGER	read-write	Enable or disable system level syslog and SNMP trap, in the new_configuration block.
INT agNewCfgSyslogTrapUfd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.47	INTEGER	read-write	Enable or disable UFD related syslog and SNMP trap, in the new_configuration block.
INT agNewCfgSyslogTrapVlan	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.11	INTEGER	read-write	Enable or disable VLAN syslog and SNMP trap, in the new_configuration block.
INT agNewCfgSyslogTrapVrrp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.21	INTEGER	read-write	Enable or disable VRRP syslog and SNMP trap, in the new_configuration block.
INT agNewCfgSyslogTrapWeb	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.35	INTEGER	read-write	Enable or disable WEBUI related syslog and SNMP trap, in the new_configuration block.
INT agNewCfgTelnetServerPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.35	INTEGER	read-write	The TCP port number that the telnet server listens for telnet sessions.
INT agNewCfgTftpServerPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.40	INTEGER	read-write	The TCP port number that the TFTP server is listening to in the new_configuration block.
INT agNewCfgUfdTrap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.58	INTEGER	read-write	Enable or disable sending UFDFO SNMP trap.
INT agNewDaylightSavings	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.52	INTEGER	read-write	The daylight savings location.
agNTP	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.4
agNTPOper	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.2
agPortConfig	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2
INT agPortCurCfgBroadcastThreshold	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.22	INTEGER	read-only	Current status of the port's Broadcast Threshold.
INT agPortCurCfgBroadcastThresholdRate	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.23	INTEGER	read-only	Current port's Broadcast Threshold Rate.
INT agPortCurCfgDLFThreshold	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.24	INTEGER	read-only	Current status of the port's Destination Lookup Fail Threshold.
INT agPortCurCfgDLFThresholdRate	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.25	INTEGER	read-only	Current port's Destination Lookup Fail Threshold Rate.
INT agPortCurCfgGigEthAutoNeg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.11	INTEGER	read-only	This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
INT agPortCurCfgGigEthFctl	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.14	INTEGER	read-only	This object is used to select port flow control for gigabit Ethernet connection.
INT agPortCurCfgGigEthMode	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.13	INTEGER	read-only	This object is used to select port mode for gigabit Ethernet connection.
INT agPortCurCfgGigEthSpeed	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.12	INTEGER	read-only	Selects the port speed for gigabit Ethernet connection.
I32 agPortCurCfgIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.1	Integer32	read-only	The index of the row in port configurations table.
INT agPortCurCfgLinkTrap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.18	INTEGER	read-only	Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
INT agPortCurCfgMulticastThreshold	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.20	INTEGER	read-only	Current status of the port's Multicast Threshold.
INT agPortCurCfgMulticastThresholdRate	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.21	INTEGER	read-only	Current port's Multicast Threshold Rate.
STR agPortCurCfgPortName	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.15	DisplayString	read-only	The switch port name.
INT agPortCurCfgPVID	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.6	INTEGER	read-only	The default VLAN ID for the port.
INT agPortCurCfgRmon	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.5	INTEGER	read-only	This object is used to turn RMON on or off on the port.
INT agPortCurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.2	INTEGER	read-only	This is the state of the port.
agPortCurCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2		not-accessible	The table of port configuration in the current_configuration block.
agPortCurCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1		not-accessible	A row in the port table in the current_configuration block.
INT agPortCurCfgTagPVID	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.19	INTEGER	read-only	This is PVID tag state of the port
STR agPortCurCfgType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.28	DisplayString	read-only	The switch port type.
INT agPortCurCfgVlanTag	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.3	INTEGER	read-only	This is VLAN tag state of the port
INT agPortNewCfgBroadcastThreshold	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.22	INTEGER	read-write	New status of the port's Broadcast Threshold.
INT agPortNewCfgBroadcastThresholdRate	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.23	INTEGER	read-write	New port's Broadcast Threshold Rate.
INT agPortNewCfgDLFThreshold	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.24	INTEGER	read-write	New status of the port's Destination Lookup Fail Threshold.
INT agPortNewCfgDLFThresholdRate	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.25	INTEGER	read-write	New port's Destination Lookup Fail Threshold Rate.
INT agPortNewCfgGigEthAutoNeg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.11	INTEGER	read-write	This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
INT agPortNewCfgGigEthFctl	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.14	INTEGER	read-write	This object is used to select port flow control for gigabit Ethernet connection.
INT agPortNewCfgGigEthMode	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.13	INTEGER	read-write	This object is used to select port mode for gigabit Ethernet connection.
INT agPortNewCfgGigEthSpeed	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.12	INTEGER	read-write	Selects the port speed for gigabit Ethernet connection.
I32 agPortNewCfgIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.1	Integer32	read-only	The index of the row in port configurations table.
INT agPortNewCfgLinkTrap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.18	INTEGER	read-write	Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
INT agPortNewCfgMulticastThreshold	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.20	INTEGER	read-write	New status of the port's Multicast Threshold.
INT agPortNewCfgMulticastThresholdRate	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.21	INTEGER	read-write	New port's Multicast Threshold Rate.
STR agPortNewCfgPortName	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.15	DisplayString	read-write	The switch port name.
INT agPortNewCfgPVID	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.6	INTEGER	read-write	The default VLAN ID for the port.
INT agPortNewCfgRmon	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.5	INTEGER	read-write	This object is used to turn RMON on or off on the port.
INT agPortNewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.2	INTEGER	read-write	This is the state of the port.
agPortNewCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3		not-accessible	The table of port configuration in the new_configuration block.
agPortNewCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1		not-accessible	A row in the port configuration table in the new_configuration block.
INT agPortNewCfgTagPVID	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.19	INTEGER	read-write	This is PVID tag state of the port
STR agPortNewCfgType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.28	DisplayString	read-only	The switch port type.
INT agPortNewCfgVlanTag	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.3	INTEGER	read-write	This is VLAN tag state of the port
agPortOperTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.1		not-accessible	The table of port operations.
agPortOperTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.1.1		not-accessible	A row in the port operations table.
I32 agPortTableMaxEnt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.1	Integer32	read-only	The maximum number of rows in the port configuration host table.
STR agRackId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.37	DisplayString	read-only	The rack unique identifier.
agRadiusConfig	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3
INT agReset	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.7	INTEGER	read-write	This is an action object to reboot the switch. other(1) is returned always when read. The following values are writable: coldReset(2)... warmReset(3)...
INT agRevert	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.5	INTEGER	read-write	This is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied changes will be reverted. This action will copy the current_config to the new_config block. other(1) is returned when this object is read.
INT agRevertApply	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.6	INTEGER	read-write	This is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes will be reverted. other(1) is returned when this object is read.
STR agRtcDate	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.14	DisplayString	read-write	The date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available.
STR agRtcTime	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.15	DisplayString	read-write	The time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available.
INT agSaveConfiguration	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.4	INTEGER	read-write	This is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to backup in flash and then the new configuration is saved to the active configuration in flash. When issued with notSaveActive, the active configuration is NOT saved to the flash and the active configuration is overwritten with the new configuration. ok(1) is returned always when read.
INT agSavePending	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.3	INTEGER	read-only	This object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash.
INT agSlotNumber	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.31	INTEGER	read-only	Identifies the slot in which this switch is installed. If the agent implementing this MIB is not a blade in a chassis this value has no meaning.
STR agSoftwareVersion	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.10	DisplayString	read-only	The version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if version is not available.
agSSHConfig	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13
agSyslog	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5
STR agSyslogMessage	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.11.1.2	DisplayString	read-only	The syslog message.
I32 agSyslogMsgIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.11.1.1	Integer32	read-only	The syslog message table index.
agSyslogMsgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.11		not-accessible	The table of syslog messages.
agSyslogMsgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.11.1		not-accessible	A syslog message stored on the switch.
I32 agSyslogMsgTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.10	Integer32	read-only	The maximum number of rows in the syslog message table.
agSystem	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1
agTacacsConfig	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10
INT agTacacsUserMapCurCfgMapping	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.31.1.2	INTEGER	read-only	Current Tacacs+ user privilege mappings.
agTacacsUserMapCurCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.31		not-accessible	The table of tacacs+ user map current configuration.
agTacacsUserMapCurCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.31.1		not-accessible	A row in the tacacs+ user mapping table.
I32 agTacacsUserMapCurCfgUId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.31.1.1	Integer32	read-only	The current config remote privilege identifier.
INT agTacacsUserMapNewCfgMapping	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.32.1.2	INTEGER	read-create	Set new Tacacs+ user privilege mappings.
agTacacsUserMapNewCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.32		not-accessible	The table of tacacs+ user map new configuration.
agTacacsUserMapNewCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.32.1		not-accessible	A row in the tacacs+ user mapping table.
I32 agTacacsUserMapNewCfgUId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.32.1.1	Integer32	read-only	The new config remote privilege identifier.
agTransfer	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7
INT agTransferAction	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.6	INTEGER	read-write	This is an action object to perform various FTP/TFTP Get or Put functions. The FTP/TFTP sever is specified in agTransferServer object. img-get(2) - Download switch image from a specified image file(agTransferImageFileName) on the FTP/TFTP server to the destinated storage(agTransferImage). cfg-get(3) - Download switch configuration from a specified file(agTransferCfgFileName) on the FTP/TFTP server. cfg-put(4) - Upload switch configuration to a specified file(agTransferCfgFileName) on the FTP/TFTP server. dump-put(5)- Download switch core dump to a specified file(agTransferDumpFileName) on the FTP/TFTP server. img-put(7) - Upload specified switch image to a specified image file(agTransferImageFileName) on the FTP/TFTP server. tsdump-put(5)- Download switch core dump to a specified file (agTransferTSDumpFileName) on the FTP/TFTP server. other(1) is returned always when read.
STR agTransferCfgFileName	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.4	DisplayString	read-write	The configuration file name.
STR agTransferDumpFileName	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.5	DisplayString	read-write	The core dump file name.
INT agTransferImage	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.2	INTEGER	read-write	Whether the image file should be loaded in image1 or image2 or boot in flash.
STR agTransferImageFileName	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.3	DisplayString	read-write	The image file name to be downloaded.
STR agTransferLastActionStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.7	DisplayString	read-only	The recorded status of the previous FTP/TFTP activity.
INT agTransferLastConfigurationActionStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.14	INTEGER	read-only	The status of the last configuration action using the file ftp/tftp'd from the server.
STR agTransferPassword	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.10	DisplayString	read-write	The password for FTP server.
STR agTransferServer	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.1	DisplayString	read-write	The FTP/TFTP server IP address or domain name.
STR agTransferTSDumpFileName	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.11	DisplayString	read-write	The TS dump file name.
STR agTransferUserName	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.9	DisplayString	read-write	The username for FTP server or blank for TFTP server.
INT allportsStatsAdminStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.5	INTEGER	read-only	The port Admin state.
STR allportsStatsDescr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.2	DisplayString	read-only	The port description.
STR allportsStatsInBcast	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.13	DisplayString	read-only	Broadcasts Packets In for port.
C32 allportsStatsInDiscards	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.17	Counter32	read-only	Discarded Packets for port.
I32 allportsStatsIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.1	Integer32	read-only	The port number.
C32 allportsStatsInErrors	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.19	Counter32	read-only	Error Packets for port.
STR allportsStatsInMcast	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.15	DisplayString	read-only	Multicast Packets In for port.
C32 allportsStatsInOctets	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.7	Counter32	read-only	Octets In for port.
C32 allportsStatsInPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.9	Counter32	read-only	Packets In for port.
STR allportsStatsInUcast	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.11	DisplayString	read-only	Unicast Packets In for port.
STR allportsStatsInUnknownProtos	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.21	DisplayString	read-only	Unknown protocol packets.
C32 allportsStatsipInDiscards	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.25	Counter32	read-only	Ip In Discards.
C32 allportsStatsipInHeaderErrors	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.24	Counter32	read-only	Ip In Header Errors.
C32 allportsStatsipInReceives	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.23	Counter32	read-only	Ip In Receives.
C32 allportsStatsLinkStateChange	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.26	Counter32	read-only	Number of link state changes.
INT allportsStatsOperStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.6	INTEGER	read-only	The port Operational Status.
STR allportsStatsOutBcast	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.14	DisplayString	read-only	Broadcasts Packets Out for port.
C32 allportsStatsOutDiscards	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.18	Counter32	read-only	Outbound Packets for port.
C32 allportsStatsOutErrors	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.20	Counter32	read-only	Not sent packets due to error.
STR allportsStatsOutMcast	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.16	DisplayString	read-only	Multicast Packets Out for port.
C32 allportsStatsOutOctets	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.8	Counter32	read-only	Octets Out for port.
C32 allportsStatsOutPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.10	Counter32	read-only	Packets Out for port.
STR allportsStatsOutQLen	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.22	DisplayString	read-only	Outbound Packet Queue Length.
STR allportsStatsOutUcast	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.12	DisplayString	read-only	Unicast Packets Out for port.
PHY allportsStatsPhysAddress	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.4	PhysAddress	read-only	The port MAC Address.
INT allportsStatsSpeed	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.3	INTEGER	read-only	The current operational speed of the port.
allportsStatsTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3		not-accessible	The table of all ports statistics.
allportsStatsTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1		not-accessible	A row in the table of all ports statistics.
INT arpCacheClear	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.2.2	INTEGER	read-write	Setting this value to clear(2) clears the ARP cache.
arpCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7
INT arpClearStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.9	INTEGER	read-write	Setting this to clear(1) results in clearing the ARP statistics.
INT arpCurCfgReARPPeriod	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.1	INTEGER	read-only	Re-ARP Period in seconds.
arpInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.2
IP arpInfoDestIp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.2.1.1.1	IpAddress	read-only	The destination IP address of the ARP entry.
arpInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.2.1.1		not-accessible	A row in the ARP table
INT arpInfoFlag	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.2.1.1.6	INTEGER	read-only	The flag associated with this ARP entry.
PHY arpInfoMacAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.2.1.1.2	PhysAddress	read-only	The MAC address for the ARP entry.
I32 arpInfoSrcPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.2.1.1.4	Integer32	read-only	The port number on which this entry's equivalence is effective.
arpInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.2.1		not-accessible	The table of ARP entries.
I32 arpInfoVLAN	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.2.1.1.3	Integer32	read-only	The VLAN identifier for the ARP entry.
INT arpNewCfgReARPPeriod	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.2	INTEGER	read-write	Re-ARP Period in seconds.
G32 arpStatEntries	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.2.1	Gauge32	read-only	The current number of ARP entries.
G32 arpStatHighWater	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.2.2	Gauge32	read-only	The highest number of ARP entries.
G32 arpStatMaxEntries	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.2.3	Gauge32	read-only	The maximum number of ARP entries.
arpStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.2
I32 authEapLogoffsWhileConnecting	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.13	Integer32	read-only
I32 authEapLogoffWhileAuthenticated	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.23	Integer32	read-only
I32 authEapLogoffWhileAuthenticating	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.20	Integer32	read-only
I32 authEapStartsWhileAuthenticated	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.22	Integer32	read-only
I32 authEapStartsWhileAuthenticating	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.19	Integer32	read-only
I32 authEntersAuthenticating	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.14	Integer32	read-only
I32 authEntersConnecting	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.12	Integer32	read-only
I32 authFailWhileAuthenticating	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.17	Integer32	read-only
I32 authReauthsWhileAuthenticated	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.21	Integer32	read-only
I32 authReauthsWhileAuthenticating	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.18	Integer32	read-only
I32 authSuccessesWhileAuthenticating	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.15	Integer32	read-only
I32 authTimeoutsWhileAuthenticating	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.16	Integer32	read-only
I32 backendAccessChallenges	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.25	Integer32	read-only
I32 backendAuthFails	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.29	Integer32	read-only
I32 backendAuthSuccesses	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.28	Integer32	read-only
I32 backendNonNakResponsesFromSupplicant	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.27	Integer32	read-only
I32 backendOtherRequestsToSupplicant	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.26	Integer32	read-only
I32 backendResponses	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.24	Integer32	read-only
NTF bntSFPInserted	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.51			A bntSFPInserted trap signifies that a SFP is inserted.
NTF bntSFPRemoved	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.52			A bntSFPRemoved trap signifies that a SFP is removed.
NTF bntSwApplyComplete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.27			A bntSwApplyComplete signifies that new configuration has been applied.
NTF bntSwCistNewRoot	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.43			A bntSwCistNewRoot trap signifies that the bridge has become the new root of the CIST.
NTF bntSwCistTopologyChanged	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.45			A bntSwCistTopologyChanged trap signifies that there was a CIST topology change.
NTF bntSwDefGwDown	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.3			A bntSwDefGwDown trap signifies that the default gateway is down.
NTF bntSwDefGwInService	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.4			A bntSwDefGwEnabled trap signifies that the default gateway is up and in service.
NTF bntSwDefGwNotInService	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.5			A bntSwDefGwDisabled trap signifies that the default gateway is alive but not in service.
NTF bntSwDefGwUp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.2			A bntSwDefGwUp trap signifies that the default gateway is alive.
NTF bntSwFwDownloadFailure	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.30			A bntSwFwDownloadFailure signifies that firmware downloaded failed to [image1\|image2\|boot image].
NTF bntSwFwDownloadSucess	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.29			A bntSwFwDownloadSuccess signifies that firmware has been downloaded to [image1\|image2\|boot image].
NTF bntSwLoginFailure	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.19			A bntSwLoginFailure trap signifies that someone failed to enter a valid username/password combination.
NTF bntSwSaveComplete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.28			A bntSwApplyComplete signifies that new configuration has been saved.
NTF bntSwStgNewRoot	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.42			A bntSwStgNewRoot trap signifies that the bridge has become the new root of the STG.
NTF bntSwStgTopologyChanged	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.44			A bntSwStgTopologyChanged trap signifies that there was a STG topology change.
NTF bntSwTempExceedThreshold	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.22			A bntSwTempExceedThreshold trap signifies that the switch temperature has exceeded maximum safety limits.
NTF bntSwTempReturnThreshold	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.31			A bntSwTempReturnThreshold trap signifies that the switch temperature has returned below maximum safety limits.
STR bntSwTrapDisplayString	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.1000	DisplayString	read-only	Temporary string object used to store information being sent in an BNT Switch trap.
NTF bntSwUfdfoGlobalDis	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.37			A bntSwUfdfoGlobalDis trap signifies that Global UFD is disabled.
NTF bntSwUfdfoGlobalEna	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.36			A bntSwUfdfoGlobalEna trap signifies that Global UFD is enabled.
NTF bntSwUfdfoLtDAutoDis	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.39			A bntSwUfdfoLtDAutoDis trap signifies that a LtD link is Auto Disabled.
NTF bntSwUfdfoLtDAutoEna	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.38			A bntSwUfdfoLtDAutoEna trap signifies that a LtD link is Auto Enabled.
NTF bntSwUfdfoLtMFailure	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.34			A bntSwUfdfoLtMFailure trap signifies that a LtM link is down.
NTF bntSwUfdfoLtMUP	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.35			A bntSwUfdfoLtMUP trap signifies that a LtM link is up.
bntTraps	1.3.6.1.4.1.11.2.3.7.11.33.5.2.7
INT cistBridgeForwardDelay	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.11	INTEGER	read-only	The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
INT cistBridgeMaxAge	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.10	INTEGER	read-only	The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
INT cistBridgePriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.9	INTEGER	read-only	The value of the writable portion of the Brigde Identifier comprising of the first two octets.
cistGeneralInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1
cistInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1
BRI cistInfoPortDesignatedBridge	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1.6	BridgeId	read-only	The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.
OCT cistInfoPortDesignatedPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1.7	OCTET STRING	read-only	The Port identifier of the port on the Designated Bridge for this port's segment.
INT cistInfoPortHelloTime	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1.9	INTEGER	read-only	The amount of time between the transmission of Configuration Port PDUs in seconds.
I32 cistInfoPortIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1.1	Integer32	read-only	The port number of the port for which this entry contains spanning tree configuration.
INT cistInfoPortLinkType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1.8	INTEGER	read-only	The point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port is being treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port is being treated as having a shared media connection.
I32 cistInfoPortPathCost	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1.3	Integer32	read-only	The contribution of this port to the path cost of paths towards the CIST Root which include this port.
I32 cistInfoPortPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1.2	Integer32	read-only	The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
INT cistInfoPortRole	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1.5	INTEGER	read-only	Selected Port Role of the port for this spanning tree instance.
INT cistInfoPortState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1.4	INTEGER	read-only	Current state of the Port as defined by the Common spanning tree protocol.
cistInfoPortTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2		not-accessible	The table of CIST Port information.
cistInfoPortTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1		not-accessible	Information about a particular CIST Port.
INT cistMaxHopCount	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.12	INTEGER	read-only	Indicates the maximum hop count value.
I32 cistRegionalPathCost	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.8	Integer32	read-only	The Cost of the path to the CIST Regional Root as seen from this bridge.
BRI cistRegionalRoot	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.7	BridgeId	read-only	The bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
BRI cistRoot	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.1	BridgeId	read-only	The bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
I32 cistRootForwardDelay	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.6	Integer32	read-only	The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
I32 cistRootMaxAge	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.5	Integer32	read-only	The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
I32 cistRootPathCost	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.2	Integer32	read-only	The cost of the path to the CIST Root as seen from this bridge.
I32 cistRootPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.3	Integer32	read-only	The Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge.
INT clearPortsStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.4	INTEGER	read-write	Setting this to clear(2) results in clearing the statistics for all ports.
clearStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6
dnsCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.9
INT dnsClearStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.8	INTEGER	read-write	Setting this to clear(1) results in clearing the DNS statistics.
STR dnsCurCfgDomainName	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.9.5	DisplayString	read-only	The DNS doamin name in the current_configuration block.
IP dnsCurCfgPrimaryIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.9.1	IpAddress	read-only	The DNS primary IP address in the current_configuration block.
IP dnsCurCfgSecondaryIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.9.3	IpAddress	read-only	The DNS primary IP address in the current_configuration block.
STR dnsNewCfgDomainName	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.9.6	DisplayString	read-write	The DNS doamin name in the new_configuration block.
IP dnsNewCfgPrimaryIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.9.2	IpAddress	read-write	The DNS primary IP address in the new_configuration block.
IP dnsNewCfgSecondaryIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.9.4	IpAddress	read-write	The DNS primary IP address in the new_configuration block.
C32 dnsStatInBadDnsRequests	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.14.3	Counter32	read-only	The total number of bad DNS request packets received
C32 dnsStatInGoodDnsRequests	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.14.1	Counter32	read-only	The total number of good DNS request packets received.
C32 dnsStatOutDnsRequests	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.14.2	Counter32	read-only	The total number of DNS request packets
dnsStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.14
dot1pInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6
INT dot1pInfoPortCOSq	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.2.1.3	INTEGER	read-only	The 8021p port COSq.
dot1pInfoPortEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.2.1		not-accessible	Information about 8021p Port Priority
I32 dot1pInfoPortIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.2.1.1	Integer32	read-only	The 8021p Port number for which the table is related.
INT dot1pInfoPortPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.2.1.2	INTEGER	read-only	The 8021p Port number for which the table is related.
dot1pInfoPortTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.2		not-accessible	The table of 8021p port priority configuration in the Current_config.
INT dot1pInfoPortWeight	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.2.1.4	INTEGER	read-only	The 8021p port weight.
dot1pInfoPriorityCOSEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.1.1		not-accessible	Current information about 8021p priority to COS queue.
INT dot1pInfoPriorityCOSQueue	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.1.1.2	INTEGER	read-only	The 8021p priority COSq.
dot1pInfoPriorityCOSTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.1		not-accessible	The table of current priority to COS queue information.
INT dot1pInfoPriorityCOSWeight	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.1.1.3	INTEGER	read-only	The 8021p priority weight.
INT dot1pInfoPriorityIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.1.1.1	INTEGER	read-only	The 8021p priority for which the table is related.
dot1x	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11
INT dot1xCurCfgGlobalMaxRq	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.5.6	INTEGER	read-only	Maximum number of requests (1..10)
INT dot1xCurCfgGlobalMode	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.5.1	INTEGER	read-only	Autehtication Mode forceUnauth(0), auto(1), forceAuth(2)
INT dot1xCurCfgGlobalQtPeriod	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.5.2	INTEGER	read-only	Quiet period (0..65535)
INT dot1xCurCfgGlobalRaPeriod	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.5.7	INTEGER	read-only	Reauthentication period (0..604800)
INT dot1xCurCfgGlobalReAuth	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.5.8	INTEGER	read-only
INT dot1xCurCfgGlobalSrvTmout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.5.5	INTEGER	read-only	Server timeout (1..65535)
INT dot1xCurCfgGlobalSupTmout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.5.4	INTEGER	read-only	Supplicant timeout (1..65535)
dot1xCurCfgGlobalTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.5
INT dot1xCurCfgGlobalTxPeriod	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.5.3	INTEGER	read-only	Tx period (1..65535)
dot1xCurCfgPortEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1		not-accessible	Information about 8021x Port Config
I32 dot1xCurCfgPortIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.1	Integer32	read-only	The 8021x Port number for which the table is related.
INT dot1xCurCfgPortMaxRq	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.7	INTEGER	read-only	Maximum numer of requests (1..10)
INT dot1xCurCfgPortMode	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.2	INTEGER	read-only	Port authenticaton mode forceUnauth(0), auto(1), forceAuth(2)
INT dot1xCurCfgPortQtPeriod	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.3	INTEGER	read-only	Quiet period (0-65535)
INT dot1xCurCfgPortRaPeriod	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.8	INTEGER	read-only	Reautentication period (0..604800)
INT dot1xCurCfgPortReAuth	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.9	INTEGER	read-only	ReAuthentication state off(0), on(1)
INT dot1xCurCfgPortSrvTmout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.6	INTEGER	read-only	Server timeout (1..65535)
INT dot1xCurCfgPortSupTmout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.5	INTEGER	read-only	Supplicant timeout (1..65535)
dot1xCurCfgPortTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3		not-accessible	The table of 8021x configuration in the Current_config.
INT dot1xCurCfgPortTxPeriod	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.4	INTEGER	read-only	Tx Period
INT dot1xCurStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.1	INTEGER	read-only	Dot1x status
dot1xInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5
INT dot1xInfoPortAuthMode	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.1.1.2	INTEGER	read-only	Authentication mode
INT dot1xInfoPortAuthPAEState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.1.1.5	INTEGER	read-only	Authenticator PAE State
INT dot1xInfoPortAuthStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.1.1.3	INTEGER	read-only	Authentication status
INT dot1xInfoPortBackAuthState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.1.1.6	INTEGER	read-only	Backend authenticator PAE state
INT dot1xInfoPortCtrlDir	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.1.1.4	INTEGER	read-only	Controlled Directions
dot1xInfoPortEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.1.1		not-accessible	Information about 8021x Port Config
I32 dot1xInfoPortIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.1.1.1	Integer32	read-only	The 8021x Port number for which the table is related.
dot1xInfoPortTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.1		not-accessible	The table of 8021x configuration in the Current_config.
INT dot1xNewCfgGlobalMaxRq	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.6.6	INTEGER	read-create	Maximum number of requests (1..10)
INT dot1xNewCfgGlobalMode	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.6.1	INTEGER	read-create	Authentication Mode
INT dot1xNewCfgGlobalQtPeriod	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.6.2	INTEGER	read-create	Quiet Period (0..65535)
INT dot1xNewCfgGlobalRaPeriod	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.6.7	INTEGER	read-create	Reauthentication period (1..604800)
INT dot1xNewCfgGlobalReAuth	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.6.8	INTEGER	read-create	Reauthentication status
INT dot1xNewCfgGlobalSrvTmout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.6.5	INTEGER	read-create	Server timeout (1..65535)
INT dot1xNewCfgGlobalSupTmout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.6.4	INTEGER	read-create	Supplicand timeout (1..65535)
dot1xNewCfgGlobalTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.6
INT dot1xNewCfgGlobalTxPeriod	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.6.3	INTEGER	read-create	Tx Period (1..65535)
INT dot1xNewCfgPortApplyGlobal	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.11	INTEGER	read-create	Apply Global config
INT dot1xNewCfgPortDefault	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.10	INTEGER	read-create	Port default settings
dot1xNewCfgPortEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1		not-accessible	Information about 8021x Port Config
I32 dot1xNewCfgPortIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.1	Integer32	read-only	The 8021x Port number for which the table is related.
INT dot1xNewCfgPortMaxRq	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.7	INTEGER	read-create	Maximum number of requests (1..10)
INT dot1xNewCfgPortMode	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.2	INTEGER	read-create	Port authentication mode forceUnauth(0), auto(1), forceAuth(2)
INT dot1xNewCfgPortQtPeriod	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.3	INTEGER	read-create	Quiet period (0..65535)
INT dot1xNewCfgPortRaPeriod	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.8	INTEGER	read-create	Reauthentication period (1..604800)
INT dot1xNewCfgPortReAuth	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.9	INTEGER	read-create	Reauthentication state off(0), on(1)
INT dot1xNewCfgPortSrvTmout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.6	INTEGER	read-create	Server Timeout (1..65535)
INT dot1xNewCfgPortSupTmout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.5	INTEGER	read-create	Supplicant Timeout (1..65535)
dot1xNewCfgPortTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4		not-accessible	The table of 8021x configuration in the new_config.
INT dot1xNewCfgPortTxPeriod	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.4	INTEGER	read-create	Tx Period (1..65535)
INT dot1xNewStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.2	INTEGER	read-write	Dot1x status
I32 dot1xPortStatsIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.1	Integer32	read-only	The 802.1x port stats index.
dot1xPortStatsTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2		not-accessible	The table of 802.1x port statistics.
dot1xPortStatsTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1		not-accessible	A row in the 802.1x port stats table.
INT dot1xSystemCapability	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.2.1	INTEGER	read-only	System capability
dot1xSystemInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.2
INT dot1xSystemProtoVersion	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.2.3	INTEGER	read-only	Protocol version
INT dot1xSystemStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.2.2	INTEGER	read-only	System status
I32 eapLengthErrorFramesRx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.11	Integer32	read-only
I32 eapolFramesRx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.2	Integer32	read-only
I32 eapolFramesTx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.3	Integer32	read-only
I32 eapolLogoffFramesRx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.5	Integer32	read-only
I32 eapolReqFramesTx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.9	Integer32	read-only
I32 eapolReqIdFramesTx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.8	Integer32	read-only
I32 eapolRespFramesRx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.7	Integer32	read-only
I32 eapolRespIdFramesRx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.6	Integer32	read-only
I32 eapolStartFramesRx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.4	Integer32	read-only
fdb	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12
INT fdbClear	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.1	INTEGER	read-write	Setting this value to clear(2) clears the entire master FDB.
I32 fdbCurCfgAgingTime	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.1.1	Integer32	read-only	Fdb current aging time
I32 fdbCurCfgEntryIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.3.1.1	Integer32	read-only	The fdb entry index
PHY fdbCurCfgMac	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.3.1.4	PhysAddress	read-only	Add a fdb entry.
I32 fdbCurCfgPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.3.1.3	Integer32	read-only	The MAC address port number.
fdbCurCfgStaticEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.3.1		not-accessible	A row in the fdb table.
fdbCurCfgStaticTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.3		not-accessible	The table of FDB static entries.
I32 fdbCurCfgVlan	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.3.1.2	Integer32	read-only	Add vlan for fdb entry index
fdbEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2.1		not-accessible	A row in the FDB table
fdbGeneralCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.1
fdbInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2
I32 fdbLearnedPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2.1.6	Integer32	read-only	The learned port associated with this FDB entry.
PHY fdbMacAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2.1.1	PhysAddress	read-only	The MAC address for the FDB entry.
PHY fdbNewCfgAddMac	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2.1.4	PhysAddress	read-create	Add a fdb entry.
I32 fdbNewCfgAddPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2.1.3	Integer32	read-create	The MAC address port number.
I32 fdbNewCfgAddVlan	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2.1.2	Integer32	read-create	Add vlan for fdb entry index
I32 fdbNewCfgAgingTime	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.1.2	Integer32	read-write	Fdb new aging time.
INT fdbNewCfgDelStaticEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2.1.5	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
I32 fdbNewCfgEntryIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2.1.1	Integer32	read-only	The fdb entry index
fdbNewCfgStaticEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2.1		not-accessible	A row in the fdb table.
fdbNewCfgStaticTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2		not-accessible	The table of FDB static entries.
STR fdbRefSps	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2.1.5	DisplayString	read-only	The referenced SPs associated with this FDB entry.
I32 fdbSrcPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2.1.3	Integer32	read-only	Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address.
I32 fdbSrcTrunk	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2.1.7	Integer32	read-only	Either the value '0', or the trunk number of the trunk on which a frame having a source address equal to the value of the corresponding instance has been seen. A value of '0' indicates that the source address is not associated with a trunk.
INT fdbState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2.1.4	INTEGER	read-only	The state of the FDB entry. The meanings of the values are : unknown(1) : the MAC address has not yet been learned by the switch but has only been seen as a destination address forward(2) : the MAC address has been learned by the switch trunk(3) : frames with this MAC address are forwarded to trunk group
fdbStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.1
INT fdbStatsClear	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.1.11	INTEGER	read-write	Clear FDB statistics
G32 fdbStatsCurrent	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.1.3	Gauge32	read-only	Current number of entries in the Forwarding Database.
I32 fdbStatsHiwat	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.1.4	Integer32	read-only	Highest number of entries recorded at any given time in the Forwarding Database.
I32 fdbStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2.1.8	Integer32	read-only	'1' if it is permanent '0' if it is not permanent
fdbTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2		not-accessible	The table of FDB entries.
I32 fdbVlan	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2.1.2	Integer32	read-only	The VLAN ID for the FDB entry.
IP gatewayInfoAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.3.1.2	IpAddress	read-only	The IP address of the default gateway.
gatewayInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.3.1		not-accessible	A row in the gateway information table
I32 gatewayInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.3.1.1	Integer32	read-only	The gateway number for which the information is related.
INT gatewayInfoStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.3.1.4	INTEGER	read-only	The status of the default gateway.
gatewayInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.3		not-accessible	The table containing information for the default gateways.
I32 gatewayInfoVlan	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.3.1.3	Integer32	read-only	The VLAN number for this gateway (0 for any).
geal3Stats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.15
geaportInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.7
I32 geaportInfoLogicalIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.7.1.1.1	Integer32	read-only	The logical port index.
INT geaportInfoPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.7.1.1.2	INTEGER	read-only	The GEA Port (0-based).
geaportInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.7.1		not-accessible	The table of gea port mapping.
geaportInfoTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.7.1.1		not-accessible	An entry in the geaport table mapping.
INT geaportInfoUnit	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.7.1.1.3	INTEGER	read-only	The GEA Unit.
INT generalInfoStpUplinkFast	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.7.1	INTEGER	read-only	STP uplink fast mode
INT generalInfoUplinkFastRate	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.7.2	INTEGER	read-only	STP fast uplink rate.
genInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.7
hardware	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.1
hpProLiant_GbE2c_1_10G_InterconnectSwitch	1.3.6.1.4.1.11.2.3.7.11.33.5.1.1
STR hwPartNumber	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.1.1	DisplayString	read-only	The hardware part number of the Bladetype2 Switch.
STR hwRevision	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.1.2	DisplayString	read-only	The hardware revision. If the revision is not available, a zero length string should be returned.
STR hwSerialNumber	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.1.5	DisplayString	read-only	The switch serial number.
INT icmpClearStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.10	INTEGER	read-write	Setting this to clear(1) results in clearing the ICMP statistics.
igmpCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15
INT igmpClearAllStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.2	INTEGER	read-write	Setting this to clear(1) results in clearing the IGMP statistics.
INT igmpCurCfgOnOff	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.1	INTEGER	read-only	Globally turn IGMP On/Off.
igmpFilterCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5
INT igmpFltCurCfgAction	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.1.1.4	INTEGER	read-only	The action for the IGMP filtering rule.
INT igmpFltCurCfgEnaDis	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.5	INTEGER	read-only	Enable/Disable of IGMP Filtering.
I32 igmpFltCurCfgIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.1.1.1	Integer32	read-only	The IGMP filter table index.
IP igmpFltCurCfgMcastIp1	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.1.1.2	IpAddress	read-only	Range1 Multicast IP address to be filtered.
IP igmpFltCurCfgMcastIp2	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.1.1.3	IpAddress	read-only	Range2 Multicast IP address to be filtered.
OCT igmpFltCurCfgPortFiltBmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.3.1.3	OCTET STRING	read-only	The IGMP filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ filter 9 \|\| \|\| \|\| \|\|___ filter 8 \|\| \|____ filter 7 \|\| . . . \|\|_________ filter 2 \|__________ filter 1 (as index to igmpFltCurCfgTable) where x : 1 - The represented IGMP filter rule applied to the port 0 - The represented IGMP filter rule not applied to the port
I32 igmpFltCurCfgPortIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.3.1.1	Integer32	read-only	The port index.
INT igmpFltCurCfgPortState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.3.1.2	INTEGER	read-only	Enable or disable IGMP filtering.
igmpFltCurCfgPortTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.3		not-accessible	The IGMP filtering port table in the current configuration block.
igmpFltCurCfgPortTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.3.1		not-accessible	A row in the IGMP filtering port table.
INT igmpFltCurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.1.1.5	INTEGER	read-only	The state of this IGMP filtering rule.
igmpFltCurCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.1		not-accessible	The IGMP filtering table in the current configuration block.
igmpFltCurCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.1.1		not-accessible	A row in the filtering table.
INT igmpFltNewCfgAction	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.2.1.4	INTEGER	read-create	The action for the IGMP filtering rule.
INT igmpFltNewCfgDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.2.1.6	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
INT igmpFltNewCfgEnaDis	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.6	INTEGER	read-write	Enable/Disable of IGMP Filtering.
I32 igmpFltNewCfgIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.2.1.1	Integer32	read-only	The IGMP filter table index.
IP igmpFltNewCfgMcastIp1	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.2.1.2	IpAddress	read-create	Range1 Multicast source IP address to be filtered.
IP igmpFltNewCfgMcastIp2	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.2.1.3	IpAddress	read-create	Range2 Multicast source IP address to be filtered.
I32 igmpFltNewCfgPortAddFiltRule	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.4.1.4	Integer32	read-create	This is an action object to add filtering rule to a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be added to the port. The range of the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the value '0' is returned always.
OCT igmpFltNewCfgPortFiltBmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.4.1.3	OCTET STRING	read-only	The IGMP filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ filter 9 \|\| \|\| \|\| \|\|___ filter 8 \|\| \|____ filter 7 \|\| . . . \|\|_________ filter 2 \|__________ filter 1 (as index to fltNewCfgTable) where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port
I32 igmpFltNewCfgPortIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.4.1.1	Integer32	read-only	The port index.
I32 igmpFltNewCfgPortRemFiltRule	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.4.1.5	Integer32	read-create	This is an action object to remove filtering rule from a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be removed from the port. The range of the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the value '0' is returned always.
INT igmpFltNewCfgPortState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.4.1.2	INTEGER	read-create	Enable or disable IGMP filtering.
igmpFltNewCfgPortTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.4		not-accessible	The IGMP filtering port table in the new configuration block.
igmpFltNewCfgPortTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.4.1		not-accessible	A row in the IGMP filtering port table.
INT igmpFltNewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.2.1.5	INTEGER	read-create	The state of this IGMP filtering rule.
igmpFltNewCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.2		not-accessible	The IGMP filtering table in the current configuration block.
igmpFltNewCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.2.1		not-accessible	A row in the filtering table.
igmpInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5
igmpInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1		not-accessible	Information about an IGMP group member .
STR igmpInfoExpires	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1.7	DisplayString	read-only	The expiration time for this host.
INT igmpInfoFwd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1.10	INTEGER	read-only	The IGMPv3 forwarding for this source/group IP for this host.
IP igmpInfoGroupId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1.2	IpAddress	read-only	The IP address of the IGMP group.
I32 igmpInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1.1	Integer32	read-only	The igmp group number for which the IGMP info table is related.
INT igmpInfoMode	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1.8	INTEGER	read-only	The IGMPv3 filter-mode for this host.
I32 igmpInfoPortNum	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1.6	Integer32	read-only	The Version of IGMP host.
IP igmpInfoSourceIp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1.9	IpAddress	read-only	The source IP address of the IGMP group.
igmpInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1		not-accessible	The table of IGMP group membership information.
INT igmpInfoVersion	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1.5	INTEGER	read-only	The Version of IGMP host.
I32 igmpInfoVlanId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1.3	Integer32	read-only	The VLAN ID for this IGMP group.
igmpMrtrInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2.1		not-accessible	Information about an IGMP mrouter.
STR igmpMrtrInfoExpires	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2.1.5	DisplayString	read-only	The expiration time for this mrouter.
I32 igmpMrtrInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2.1.1	Integer32	read-only	The mrouter number for which the IGMP mrouter info table is related.
I32 igmpMrtrInfoMrt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2.1.6	Integer32	read-only	The Maximum Query Response time of this IGMP mrouter.
I32 igmpMrtrInfoPortId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2.1.3	Integer32	read-only	The port on which this IGMP mrouter is attached.
INT igmpMrtrInfoQqic	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2.1.8	INTEGER	read-only	The Querier query interval code of this IGMP mrouter.
INT igmpMrtrInfoQrv	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2.1.7	INTEGER	read-only	The Querier Robustness value of this IGMP mrouter.
igmpMrtrInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2		not-accessible	The table of IGMP mrouters.
I32 igmpMrtrInfoVersion	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2.1.4	Integer32	read-only	The version of this IGMP mrouter.
I32 igmpMrtrInfoVlanId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2.1.2	Integer32	read-only	The VLAN ID on which this IGMP mrouter is attached.
INT igmpNewCfgOnOff	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.2	INTEGER	read-write	Globally turn IGMP On/Off.
igmpSnoopCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1
igmpSnoopCfgGen	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3
INT igmpSnoopCurCfgAggrEnaDis	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.27	INTEGER	read-only	Enable/Disable of IGMP Report aggregation.
INT igmpSnoopCurCfgFlood	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.29	INTEGER	read-only	Enable/Disable of flood unregistered IPMC
I32 igmpSnoopCurCfgMrto	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.3	Integer32	read-only	The value of multicast router timeout in the current config.
I32 igmpSnoopCurCfgQInterval	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.23	Integer32	read-only	IGMP Query Interval of current config.
I32 igmpSnoopCurCfgRobust	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.16	Integer32	read-only	The value of expected packet loss on subnet in the current config.
IP igmpSnoopCurCfgSrcIp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.25	IpAddress	read-only	The source ip for GSQ proxy in current config.
I32 igmpSnoopCurCfgTimeout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.1	Integer32	read-only	Set IGMP Report timeout.
OCT igmpSnoopCurCfgVlanBmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.21	OCTET STRING	read-only	The snooping vlans present in the in vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Vlan 9 \|\| \|\| \|\| \|\|___ Vlan 8 \|\| \|____ Vlan 7 \|\| . . . \|\|_________ Vlan 2 \|__________ Vlan 1 where x : 1 - The represented vlan has snoop enabled 0 - The represented vlan does not have snooping enabled.
OCT igmpSnoopCurCfgVlanFastlvBmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.14	OCTET STRING	read-only	The fastlv enabled vlans present in the in vlan map list. The fastlv enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Vlan 9 \|\| \|\| \|\| \|\|___ Vlan 8 \|\| \|____ Vlan 7 \|\| . . . \|\|_________ Vlan 2 \|__________ Vlan 1 where x : 1 - The represented vlan has fastlv enabled 0 - The represented vlan does not have fastlv enabled.
INT igmpSnoopNewCfgAggrEnaDis	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.28	INTEGER	read-write	Enable/Disable of IGMP Report aggregation.
INT igmpSnoopNewCfgFlood	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.30	INTEGER	read-write	Enable/Disable of flood unregistered IPMC
I32 igmpSnoopNewCfgMrto	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.4	Integer32	read-write	The value of multicast router timeout in the new config.
I32 igmpSnoopNewCfgQInterval	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.24	Integer32	read-write	IGMP Query Interval of new config.
I32 igmpSnoopNewCfgRobust	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.17	Integer32	read-write	The value of expected packet loss on subnet in the new config.
IP igmpSnoopNewCfgSrcIp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.26	IpAddress	read-write	The source ip for GSQ proxy in new config.
I32 igmpSnoopNewCfgTimeout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.2	Integer32	read-write	Set IGMP Report timeout.
I32 igmpSnoopNewCfgVlanAdd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.18	Integer32	read-write	The VLAN to be added to snooping vlan list. When read, 0 is returned.
OCT igmpSnoopNewCfgVlanBmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.22	OCTET STRING	read-only	The snooping vlans present in the in vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Vlan 9 \|\| \|\| \|\| \|\|___ Vlan 8 \|\| \|____ Vlan 7 \|\| . . . \|\|_________ Vlan 2 \|__________ Vlan 1 where x : 1 - The represented vlan has snoop enabled 0 - The represented vlan does not have snooping enabled.
INT igmpSnoopNewCfgVlanClear	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.20	INTEGER	read-write	Removing ALL Snooping Vlans.
I32 igmpSnoopNewCfgVlanFastlvAdd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.12	Integer32	read-write	The VLAN to be added to fastleave vlan list. When read, 0 is returned.
OCT igmpSnoopNewCfgVlanFastlvBmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.15	OCTET STRING	read-only	The fastlv enabled vlans present in the in vlan map list. The fastlv enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Vlan 9 \|\| \|\| \|\| \|\|___ Vlan 8 \|\| \|____ Vlan 7 \|\| . . . \|\|_________ Vlan 2 \|__________ Vlan 1 where x : 1 - The represented vlan has fastlv enabled 0 - The represented vlan does not have fastlv enabled.
I32 igmpSnoopNewCfgVlanFastlvRem	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.13	Integer32	read-write	The VLAN to be removed from fastleave vlan list. When read, 0 is returned.
I32 igmpSnoopNewCfgVlanRem	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.19	Integer32	read-write	The VLAN to be removed from snooping vlan list. When read, 0 is returned.
igmpSnoopStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1		not-accessible	The table of OSPF Interface Error Statistics.
igmpSnoopStatsEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1		not-accessible	Statistics for IGMP Snooping.
I32 igmpSnoopVlanIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.1	Integer32	read-only	The index of the VLAN for which these statistics apply.
igmpStaticMrtrCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4
I32 igmpStaticMrtrCurCfgIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.1.1.1	Integer32	read-only	The IGMP Multicast Router table port index.
I32 igmpStaticMrtrCurCfgPortId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.1.1.2	Integer32	read-only	The IGMP Multicast Router port in the current configuration block.
igmpStaticMrtrCurCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.1		not-accessible	The IGMP Static Multicast Router table in the current configuration block.
igmpStaticMrtrCurCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.1.1		not-accessible	A row in the Static Multicast Router table.
INT igmpStaticMrtrCurCfgVersion	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.1.1.4	INTEGER	read-only	The IGMP version of the IGMP Static Multicast Router.
I32 igmpStaticMrtrCurCfgVlanId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.1.1.3	Integer32	read-only	The IGMP Multicast Router port in the current configuration block.
INT igmpStaticMrtrNewCfgDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.2.1.5	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
I32 igmpStaticMrtrNewCfgIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.2.1.1	Integer32	read-only	The IGMP Multicast Router table port index.
I32 igmpStaticMrtrNewCfgPortId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.2.1.2	Integer32	read-create	The IGMP Multicast Router port in the new configuration block.
igmpStaticMrtrNewCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.2		not-accessible	The IGMP Static Multicast Router table in the new configuration block.
igmpStaticMrtrNewCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.2.1		not-accessible	A row in the Static Multicast Router table.
INT igmpStaticMrtrNewCfgVersion	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.2.1.4	INTEGER	read-create	The IGMP version of the IGMP Static Multicast Router.
I32 igmpStaticMrtrNewCfgVlanId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.2.1.3	Integer32	read-create	The IGMP Multicast Router port in the new configuration block.
igmpStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7
C32 igmpStatsTotalIgmpGroups	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.3	Counter32	read-only	The total number of IGMP groups.
C32 igmpStatsTotalIpmcGroups	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.4	Counter32	read-only	The total number of IPMC groups.
igmpV3SnoopCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.2
INT igmpV3SnoopCurCfgEnaDis	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.2.3	INTEGER	read-only	The current status of IGMP V3 Snooping.
INT igmpV3SnoopCurCfgExcludeEnaDis	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.2.5	INTEGER	read-only	The current status of IGMP V3 EXCLUDE filter-mode Snooping.
I32 igmpV3SnoopCurCfgSources	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.2.1	Integer32	read-only	Number of sources to snoop in a group record in current config.
INT igmpV3SnoopCurCfgV1V2EnaDis	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.2.7	INTEGER	read-only	The current status of IGMP V1/V2 Report Snooping.
INT igmpV3SnoopNewCfgEnaDis	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.2.4	INTEGER	read-write	Set Enable/Disable of IGMP V3 Snooping.
INT igmpV3SnoopNewCfgExcludeEnaDis	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.2.6	INTEGER	read-write	Set Enable/Disable of IGMP V3 EXCLUDE filter-mode Snooping.
I32 igmpV3SnoopNewCfgSources	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.2.2	Integer32	read-write	Number of sources to snoop in a group record in new config.
INT igmpV3SnoopNewCfgV1V2EnaDis	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.2.8	INTEGER	read-write	Set Enable/Disable of IGMP V1/V2 Report Snooping.
I32 illegalRx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.6	Integer32	read-only	Illegal subtype received
STR intfInfoAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.2.1.2	DisplayString	read-only	The IP address of the interface.
STR intfInfoBcastAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.2.1.4	DisplayString	read-only	The broadcast address of the interface.
intfInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.2.1		not-accessible	A row in IP interface information table.
I32 intfInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.2.1.1	Integer32	read-only	The interface number for which the information is related.
STR intfInfoNetMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.2.1.3	DisplayString	read-only	The subnet mask of the interface.
INT intfInfoStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.2.1.6	INTEGER	read-only	The status of the interface.
I32 intfInfoVlan	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.2.1.5	Integer32	read-only	The VLAN number for this interface.
I32 invalidEapolFramesRx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.10	Integer32	read-only
I32 ipAlistTableMax	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.4	Integer32	read-only	The maximum number of rows in the IP route map table.
ipBootpCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.8
INT ipClearStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.1	INTEGER	read-write	Setting this to clear(1) results in clearing the IP statistics.
INT ipCurCfgAlistAction	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.5.1.5	INTEGER	read-only	Action of the route map access list.
ipCurCfgAlistEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.5.1		not-accessible	Information about an IP route map.
I32 ipCurCfgAlistIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.5.1.2	Integer32	read-only	The access list number for which the access list is related.
U32 ipCurCfgAlistMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.5.1.4	Unsigned32	read-only	The metric of the route map access list. 4294967295 means none
INT ipCurCfgAlistNwf	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.5.1.3	INTEGER	read-only	The network filter number of the route map access list. 0 means none
I32 ipCurCfgAlistRmapIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.5.1.1	Integer32	read-only	The route map number for which the RMAP is related.
INT ipCurCfgAlistState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.5.1.6	INTEGER	read-only	Enable or disable the route map access list.
ipCurCfgAlistTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.5		not-accessible	The table of IP route map access list configuration in the current_config.
IP ipCurCfgBootpAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.8.1	IpAddress	read-only	The IP address of BOOTP server.
IP ipCurCfgBootpAddr2	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.8.3	IpAddress	read-only	The IP address of second BOOTP server.
INT ipCurCfgBootpState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.8.5	INTEGER	read-only	The state of BOOTP relay.
IP ipCurCfgGwAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.4.1.2	IpAddress	read-only	The IP address of the default gateway.
INT ipCurCfgGwArp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.4.1.6	INTEGER	read-only	The state of ARP only health checks.
ipCurCfgGwEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.4.1		not-accessible	A row in the Ip gateway table
I32 ipCurCfgGwIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.4.1.1	Integer32	read-only	The gateway number for which the information is related.
INT ipCurCfgGwInterval	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.4.1.3	INTEGER	read-only	The interval between ping attempts.
INT ipCurCfgGwRetry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.4.1.4	INTEGER	read-only	The number of failed attempts to declare the default gateway DOWN.
INT ipCurCfgGwState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.4.1.5	INTEGER	read-only	The state of the default gateway.
ipCurCfgGwTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.4		not-accessible	The table of gateways in the Current configuration Block.
IP ipCurCfgIntfAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.2.1.2	IpAddress	read-only	The IP address of the interface.
INT ipCurCfgIntfBootpRelay	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.2.1.7	INTEGER	read-only	Enable/disable BOOTP relay.
IP ipCurCfgIntfBroadcast	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.2.1.4	IpAddress	read-only	The broadcast address of the interface.
ipCurCfgIntfEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.2.1		not-accessible	A row in the Ip interface table
I32 ipCurCfgIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.2.1.1	Integer32	read-only	The interface number for which the IP information is related.
IP ipCurCfgIntfMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.2.1.3	IpAddress	read-only	The subnet mask of the interface.
INT ipCurCfgIntfState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.2.1.6	INTEGER	read-only	The state of the interface.
ipCurCfgIntfTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.2		not-accessible	The table of IP interface configuration.
INT ipCurCfgIntfVlan	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.2.1.5	INTEGER	read-only	The VLAN associated with the interface.
IP ipCurCfgNwfAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.2.1.2	IpAddress	read-only	The IP address of the network filter.
ipCurCfgNwfEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.2.1		not-accessible	Information about an IP network filter.
I32 ipCurCfgNwfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.2.1.1	Integer32	read-only	The netowrk filter number for which the NWF is related.
IP ipCurCfgNwfMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.2.1.3	IpAddress	read-only	The subnet mask of the network filter.
INT ipCurCfgNwfState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.2.1.4	INTEGER	read-only	Enable or disable the network filter.
ipCurCfgNwfTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.2		not-accessible	The table of IP network filter configuration in the current_config.
ipCurCfgRmapEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.2.1		not-accessible	Information about an IP route map.
I32 ipCurCfgRmapIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.2.1.1	Integer32	read-only	The route map number for which the RMAP is related.
U32 ipCurCfgRmapMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.2.1.3	Unsigned32	read-only	The metric of the route map. 4294967295 means none
INT ipCurCfgRmapMetricType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.2.1.8	INTEGER	read-only	The OSPF metric-type of the matched route.
INT ipCurCfgRmapPrec	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.2.1.4	INTEGER	read-only	The precedence of the route map.
INT ipCurCfgRmapState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.2.1.6	INTEGER	read-only	Enable or disable the route map.
ipCurCfgRmapTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.2		not-accessible	The table of IP route map configuration in the current_config.
IP ipCurCfgRouterID	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.14.1	IpAddress	read-only	The router ID of the switch.
ipCurCfgStaticArpEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.4.1		not-accessible	A row in the static ARP table
I32 ipCurCfgStaticArpIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.4.1.1	Integer32	read-only	The index of the static ARP table.
IP ipCurCfgStaticArpIp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.4.1.2	IpAddress	read-only	The IP address for the ARP entry.
STR ipCurCfgStaticArpMAC	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.4.1.3	DisplayString	read-only	The MAC address for the ARP entry.
I32 ipCurCfgStaticArpPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.4.1.5	Integer32	read-only	The port for the ARP entry.
ipCurCfgStaticArpTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.4		not-accessible	The table of static ARPs in the current configuration block.
INT ipCurCfgStaticArpVlan	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.4.1.4	INTEGER	read-only	The VLAN for the ARP entry.
IP ipCurCfgStaticRouteDestIp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.2.1.2	IpAddress	read-only	The destination IP address of this route.
ipCurCfgStaticRouteEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.2.1		not-accessible	A row in the static IP route table
IP ipCurCfgStaticRouteGateway	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.2.1.4	IpAddress	read-only	The destination IP address of this route.
I32 ipCurCfgStaticRouteIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.2.1.1	Integer32	read-only	The index of the static routing table.
I32 ipCurCfgStaticRouteInterface	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.2.1.5	Integer32	read-only	The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
IP ipCurCfgStaticRouteMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.2.1.3	IpAddress	read-only	The destination IP address of this route.
ipCurCfgStaticRouteTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.2		not-accessible	The table of static routes in the current configuration block.
ipForwardCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.4
INT ipFwdCurCfgDirectedBcast	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.4.1.3	INTEGER	read-only	Enable or disable forwarding directed broadcasts.
INT ipFwdCurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.4.1.1	INTEGER	read-only	IP forwarding global state.
ipFwdGeneralCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.4.1
INT ipFwdNewCfgDirectedBcast	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.4.1.4	INTEGER	read-write	Enable or disable forwarding directed broadcasts.
INT ipFwdNewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.4.1.2	INTEGER	read-write	IP forwarding global state.
ipGatewayCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2
I32 ipGatewayTableMax	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.3	Integer32	read-only	The maximum number of rows in the IP gateway table.
ipGeneralCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.14
ipInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8
IP ipInfoBootpRelayAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.5	IpAddress	read-only	The IP address of BOOTP server.
IP ipInfoBootpRelayAddr2	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.6	IpAddress	read-only	The IP address of second BOOTP server.
INT ipInfoBootpRelayState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.4	INTEGER	read-only	The state of BOOTP relay.
INT ipInfoFwdDirectedBcast	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.8	INTEGER	read-only	The state of forwarding directed broadcasts.
INT ipInfoFwdState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.7	INTEGER	read-only	IP forwarding global state.
IP ipInfoNwfAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.9.1.2	IpAddress	read-only	The IP address of the network filter.
ipInfoNwfEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.9.1		not-accessible	A row in the IP network filter information table.
I32 ipInfoNwfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.9.1.1	Integer32	read-only	The netowrk filter number for which the NWF is related.
IP ipInfoNwfMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.9.1.3	IpAddress	read-only	The subnet mask of the network filter.
INT ipInfoNwfState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.9.1.4	INTEGER	read-only	The state of the network filter.
ipInfoNwfTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.9		not-accessible	The table of IP network filter information.
STR ipInfoRmapAp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10.1.7	DisplayString	read-only	The as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is: [][ ]
ipInfoRmapEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10.1		not-accessible	Information about an IP route map.
I32 ipInfoRmapIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10.1.1	Integer32	read-only	The route map number for which the RMAP is related.
U32 ipInfoRmapLp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10.1.2	Unsigned32	read-only	The local-preference of the route map. 4294967295 means none
U32 ipInfoRmapMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10.1.3	Unsigned32	read-only	The metric of the route map. 4294967295 means none
INT ipInfoRmapMetricType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10.1.8	INTEGER	read-only	The OSPF metric-type of the matched route.
INT ipInfoRmapPrec	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10.1.4	INTEGER	read-only	The precedence of the route map.
INT ipInfoRmapState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10.1.6	INTEGER	read-only	Enable or disable the route map.
ipInfoRmapTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10		not-accessible	The table of IP route map information.
INT ipInfoRmapWeight	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10.1.5	INTEGER	read-only	The weight of the route map. 65535 means none
IP ipInfoRouterID	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.1	IpAddress	read-only	Router ID information.
ipInterfaceCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1
I32 ipInterfaceTableMax	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.1	Integer32	read-only	The maximum number of rows in the IP interface table.
ipIntfInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.2		not-accessible	The table of IP interface information.
INT ipNewCfgAlistAction	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.6.1.5	INTEGER	read-create	Action of the route map access list.
INT ipNewCfgAlistDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.6.1.7	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ipNewCfgAlistEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.6.1		not-accessible	Information about an IP route map.
I32 ipNewCfgAlistIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.6.1.2	Integer32	read-only	The access list number for which the access list is related.
U32 ipNewCfgAlistMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.6.1.4	Unsigned32	read-create	The metric of the route map access list. 16777215 means none
INT ipNewCfgAlistNwf	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.6.1.3	INTEGER	read-create	The network filter number of the route map access list. 0 means none
I32 ipNewCfgAlistRmapIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.6.1.1	Integer32	read-only	The route map number for which the RMAP is related.
INT ipNewCfgAlistState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.6.1.6	INTEGER	read-create	Enable or disable the route map access list.
ipNewCfgAlistTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.6		not-accessible	The table of IP route map access list configuration in the current_config.
IP ipNewCfgBootpAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.8.2	IpAddress	read-write	The IP address of BOOTP server.
IP ipNewCfgBootpAddr2	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.8.4	IpAddress	read-write	The IP address of second BOOTP server.
INT ipNewCfgBootpState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.8.6	INTEGER	read-write	The state of BOOTP relay.
IP ipNewCfgGwAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.5.1.2	IpAddress	read-create	The IP address of the default gateway.
INT ipNewCfgGwArp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.5.1.7	INTEGER	read-create	The state of the ARP only health checks.
INT ipNewCfgGwDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.5.1.6	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ipNewCfgGwEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.5.1		not-accessible	A row in the Ip default gateway table
I32 ipNewCfgGwIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.5.1.1	Integer32	read-only	The gateway number for which the information is related.
INT ipNewCfgGwInterval	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.5.1.3	INTEGER	read-create	The interval in seconds between ping attempts.
INT ipNewCfgGwRetry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.5.1.4	INTEGER	read-create	The number of failed attempts to declare the default gateway DOWN.
INT ipNewCfgGwState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.5.1.5	INTEGER	read-create	The state of the default gateway.
ipNewCfgGwTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.5		not-accessible	The table of gateway configuration in the new configuration block.
IP ipNewCfgIntfAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.3.1.2	IpAddress	read-create	The IP address of the interface.
INT ipNewCfgIntfBootpRelay	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.3.1.8	INTEGER	read-create	Enable/disable BOOTP relay.
INT ipNewCfgIntfDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.3.1.7	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ipNewCfgIntfEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.3.1		not-accessible	A row in the Ip interface table
I32 ipNewCfgIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.3.1.1	Integer32	read-only	The interface number for which the IP information is related.
IP ipNewCfgIntfMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.3.1.3	IpAddress	read-create	The subnet mask of the interface.
INT ipNewCfgIntfState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.3.1.6	INTEGER	read-create	The state of the interface.
ipNewCfgIntfTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.3		not-accessible	The table of interface configuration in the New Configuration Block.
INT ipNewCfgIntfVlan	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.3.1.5	INTEGER	read-create	The VLAN associated with the interface.
IP ipNewCfgNwfAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.3.1.2	IpAddress	read-create	The IP address of the network filter.
INT ipNewCfgNwfDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.3.1.5	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ipNewCfgNwfEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.3.1		not-accessible	Information about an IP network filter.
I32 ipNewCfgNwfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.3.1.1	Integer32	read-only	The netowrk filter number for which the NWF is related.
IP ipNewCfgNwfMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.3.1.3	IpAddress	read-create	The subnet mask of the network filter.
INT ipNewCfgNwfState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.3.1.4	INTEGER	read-create	Enable or disable the network filter.
ipNewCfgNwfTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.3		not-accessible	The table of IP network filter configuration in the current_config.
INT ipNewCfgRmapDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.3.1.9	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ipNewCfgRmapEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.3.1		not-accessible	Information about an IP route map.
I32 ipNewCfgRmapIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.3.1.1	Integer32	read-only	The route map number for which the RMAP is related.
U32 ipNewCfgRmapMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.3.1.3	Unsigned32	read-create	The metric of the route map. 16777215 means none
INT ipNewCfgRmapMetricType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.3.1.8	INTEGER	read-create	The OSPF metric-type of the matched route.
INT ipNewCfgRmapPrec	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.3.1.4	INTEGER	read-create	The precedence of the route map.
INT ipNewCfgRmapState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.3.1.6	INTEGER	read-create	Enable or disable the route map.
ipNewCfgRmapTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.3		not-accessible	The table of IP route map configuration in the current_config.
IP ipNewCfgRouterID	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.14.2	IpAddress	read-write	The router ID of the switch.
INT ipNewCfgStaticArpAction	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.5.1.6	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ipNewCfgStaticArpEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.5.1		not-accessible	A row in the static ARP table
I32 ipNewCfgStaticArpIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.5.1.1	Integer32	read-only	The index of the static ARP table.
IP ipNewCfgStaticArpIp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.5.1.2	IpAddress	read-create	The IP address for the ARP entry.
STR ipNewCfgStaticArpMAC	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.5.1.3	DisplayString	read-create	The MAC address for the ARP entry.
I32 ipNewCfgStaticArpPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.5.1.5	Integer32	read-create	The port for the ARP entry.
ipNewCfgStaticArpTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.5		not-accessible	The table of static ARPs in the new configuration block.
INT ipNewCfgStaticArpVlan	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.5.1.4	INTEGER	read-create	The VLAN for the ARP entry.
INT ipNewCfgStaticRouteAction	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.3.1.5	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
IP ipNewCfgStaticRouteDestIp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.3.1.2	IpAddress	read-create	The destination IP address of this route.
ipNewCfgStaticRouteEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.3.1		not-accessible	A row in the static IP route table
IP ipNewCfgStaticRouteGateway	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.3.1.4	IpAddress	read-create	The IP address of the gateway for this route.
I32 ipNewCfgStaticRouteIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.3.1.1	Integer32	read-only	The index of the static routing table.
I32 ipNewCfgStaticRouteInterface	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.3.1.6	Integer32	read-create	The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
IP ipNewCfgStaticRouteMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.3.1.3	IpAddress	read-create	The subnet mask of this route.
ipNewCfgStaticRouteTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.3		not-accessible	The table of static routes in the new configuration block.
ipNwfCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10
I32 ipNwfTableMax	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.1	Integer32	read-only	The maximum number of rows in the IP network filter table.
INT ipOspfAreaInfoAuthType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.6.1.4	INTEGER	read-only	Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
ipOspfAreaInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.6.1		not-accessible	Information about a OSPF area.
IP ipOspfAreaInfoId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.6.1.2	IpAddress	read-only	The IP Address of the OSPF area.
I32 ipOspfAreaInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.6.1.1	Integer32	read-only	The OSPF area number for which the OSPF area table is related.
INT ipOspfAreaInfoMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.6.1.6	INTEGER	read-only	Metric (1-65535)
INT ipOspfAreaInfoSpfInterval	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.6.1.3	INTEGER	read-only	The SPF interval for the OSPF area.
INT ipOspfAreaInfoStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.6.1.7	INTEGER	read-only	Status disabled(0) enabled(1)
ipOspfAreaInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.6		not-accessible	The table of OSPF Area Information.
INT ipOspfAreaInfoType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.6.1.5	INTEGER	read-only	Type of Area. transit(0) stub(1) nssa(2)
I32 ipOspfHostInfoAreaIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.10.1.3	Integer32	read-only	The area index.
I32 ipOspfHostInfoCost	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.10.1.4	Integer32	read-only	The cost of the corresponding host.
ipOspfHostInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.10.1		not-accessible	Information about a OSPF host.
I32 ipOspfHostInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.10.1.1	Integer32	read-only	The OSPF host number for which the OSPF host table is related.
IP ipOspfHostInfoIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.10.1.2	IpAddress	read-only	The IP Address of the OSPF host.
INT ipOspfHostInfoState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.10.1.5	INTEGER	read-only	Enable or disable an OSPF Host
ipOspfHostInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.10		not-accessible	The table of OSPF Host Information.
ipOspfInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11
INT ipOspfInfoDefaultRouteMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.2	INTEGER	read-only	The metric to be assigned.
INT ipOspfInfoDefaultRouteMetricType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.3	INTEGER	read-only	The AS External metric type to be assigned.
INT ipOspfInfoLsdbLimit	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.5	INTEGER	read-only	The LSDB limit for external LSA.
IP ipOspfInfoRouterID	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.4	IpAddress	read-only	The router ID of the switch.
INT ipOspfInfoState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.1	INTEGER	read-only	OSPF global state.
INT ipOspfIntfInfoArea	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.3	INTEGER	read-only	The index of the area that the interface belongs
STR ipOspfIntfInfoAuthKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.11	DisplayString	read-only	Authentication Key
INT ipOspfIntfInfoCost	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.5	INTEGER	read-only	Interface cost
INT ipOspfIntfInfoDead	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.8	INTEGER	read-only	Dead interval
ipOspfIntfInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1		not-accessible	Information about an OSPF Interface.
INT ipOspfIntfInfoHello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.7	INTEGER	read-only	Hello interval
IP ipOspfIntfInfoId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.2	IpAddress	read-only	The IP Address of the OSPF interface.
I32 ipOspfIntfInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.1	Integer32	read-only	The OSPF Interface number for which the OSPF Interface table is related.
INT ipOspfIntfInfoMdkey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.4	INTEGER	read-only	The MD5 key for the OSPF interface 0 (none) no MD5 authentication.
INT ipOspfIntfInfoPrio	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.6	INTEGER	read-only	Interface router priority
INT ipOspfIntfInfoRetra	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.10	INTEGER	read-only	Retransmit interval
INT ipOspfIntfInfoStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.12	INTEGER	read-only	Status of the interface disabled(0), enabled(1)
ipOspfIntfInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8		not-accessible	The table of OSPF Interface Information.
INT ipOspfIntfInfoTrans	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.9	INTEGER	read-only	Transit delay
ipOspfMd5keyInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.12.1		not-accessible	Information about an OSPF MD keys table.
I32 ipOspfMd5keyInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.12.1.1	Integer32	read-only	The OSPF MD5 Key number for which the OSPF MdKey table is related.
STR ipOspfMd5keyInfoKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.12.1.2	DisplayString	read-only	The character string representing the MD5 Key.
ipOspfMd5keyInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.12		not-accessible	The table of OSPF MD5 keys Information.
IP ipOspfRangeInfoAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.7.1.2	IpAddress	read-only	The IP Address of the range.
I32 ipOspfRangeInfoAreaIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.7.1.4	Integer32	read-only	The area index.
ipOspfRangeInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.7.1		not-accessible	Information about an OSPF summary range.
INT ipOspfRangeInfoHideState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.7.1.5	INTEGER	read-only	The state of the hide range.
I32 ipOspfRangeInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.7.1.1	Integer32	read-only	The range number for which the OSPF summary range table is related.
IP ipOspfRangeInfoMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.7.1.3	IpAddress	read-only	The mask of the range.
INT ipOspfRangeInfoState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.7.1.6	INTEGER	read-only	The state of the range.
ipOspfRangeInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.7		not-accessible	The table of OSPF summary range information.
ipOspfRedistributeFixedInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.2
INT ipOspfRedistributeFixedInfoMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.2.1	INTEGER	read-only	The export metric for fixed routes. A value of 0 indicates none
INT ipOspfRedistributeFixedInfoMetricType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.2.2	INTEGER	read-only	The AS External metric type for fixed routes.
OCT ipOspfRedistributeFixedInfoOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.2.3	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
ipOspfRedistributeInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11
ipOspfRedistributeRipInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.3
INT ipOspfRedistributeRipInfoMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.3.1	INTEGER	read-only	The export metric for RIP routes. A value of 0 indicates none
INT ipOspfRedistributeRipInfoMetricType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.3.2	INTEGER	read-only	The AS External metric type for RIP routes.
OCT ipOspfRedistributeRipInfoOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.3.3	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
ipOspfRedistributeStaticInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.1
INT ipOspfRedistributeStaticInfoMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.1.1	INTEGER	read-only	The metric to be assigned to static routes. A value of 0 indicates none.
INT ipOspfRedistributeStaticInfoMetricType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.1.2	INTEGER	read-only	The AS External metric type for static routes.
OCT ipOspfRedistributeStaticInfoOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.1.3	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
INT ipOspfVirtIntfInfoAreaId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.2	INTEGER	read-only	The index of the OSPF area to which this virtual interface belongs.
STR ipOspfVirtIntfInfoAuthKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.9	DisplayString	read-only	Authentication Key
INT ipOspfVirtIntfInfoDead	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.6	INTEGER	read-only	Dead interval
ipOspfVirtIntfInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1		not-accessible	Information about an OSPF virtual Interface.
INT ipOspfVirtIntfInfoHello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.5	INTEGER	read-only	Hello interval
I32 ipOspfVirtIntfInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.1	Integer32	read-only	The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related.
INT ipOspfVirtIntfInfoMdkey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.4	INTEGER	read-only	The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
IP ipOspfVirtIntfInfoNbr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.3	IpAddress	read-only	The IP Address of the OSPF neighbor for this virtual interface.
INT ipOspfVirtIntfInfoRetra	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.8	INTEGER	read-only	Retransmit interval
INT ipOspfVirtIntfInfoStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.10	INTEGER	read-only	Status disabled(0), enabled(1)
ipOspfVirtIntfInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9		not-accessible	The table of OSPF Virtual Interface Information.
INT ipOspfVirtIntfInfoTrans	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.7	INTEGER	read-only	Transit delay
ipRmapCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11
I32 ipRmapTableMax	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.1	Integer32	read-only	The maximum number of rows in the IP route map table.
IP ipRouteInfoDestIp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1.1.2	IpAddress	read-only	The destination IP address of this route.
ipRouteInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1.1		not-accessible	A row in the run-time IP route table
IP ipRouteInfoGateway	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1.1.4	IpAddress	read-only	The next-hop router address for this route.
I32 ipRouteInfoIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1.1.1	Integer32	read-only	The index of this route table.
I32 ipRouteInfoInterface	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1.1.7	Integer32	read-only	The interface number for which the destination address is applicable.
IP ipRouteInfoMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1.1.3	IpAddress	read-only	The destination IP mask of this route.
I32 ipRouteInfoMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1.1.8	Integer32	read-only	The metric of this route.
ipRouteInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1		not-accessible	The table of run-time IP routes.
INT ipRouteInfoTag	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1.1.5	INTEGER	read-only	The tag-type for this route.
INT ipRouteInfoType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1.1.6	INTEGER	read-only	The type of the route.
ipRoutingInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1
INT ipStaticArpTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.3	INTEGER	read-only	The maximum number of rows in the Static ARP table.
ipStaticRouteCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3
INT ipStaticRouteClearAll	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.7	INTEGER	read-write	When set to clear(2),clears all static routes. Otherwhise nothing is done.
IP ipStaticRouteClearAllByDestIp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.4	IpAddress	read-write	Clears all static routes with the specified destination IP address.
IP ipStaticRouteClearAllByGatewayIp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.5	IpAddress	read-write	Clears all static routes with the specified gateway IP address.
INT ipStaticRouteClearAllByInterface	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.6	INTEGER	read-write	Clears all routes on the specified inteface number.
I32 ipStaticRouteTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.1	Integer32	read-only	The maximum number of rows in the Static Route table.
ipStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8
C32 ipStatsDefaultTTL	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8.9	Counter32	read-only	ip DefaultTTL
C32 ipStatsInAddrErrors	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8.3	Counter32	read-only	ip InAddrErrors
C32 ipStatsInDelivers	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8.6	Counter32	read-only	ip InDelivers
C32 ipStatsInDiscards	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8.5	Counter32	read-only	ip InDiscards
C32 ipStatsInHdrErrors	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8.2	Counter32	read-only	ip InHdrError
C32 ipStatsInReceives	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8.1	Counter32	read-only	ip InReceive
C32 ipStatsInUnknownProtos	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8.4	Counter32	read-only	ip InUnknownProtos
C32 ipStatsOutDiscards	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8.8	Counter32	read-only	ip OutDiscards
C32 ipStatsOutRequests	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8.7	Counter32	read-only	ip OutRequests
l2GeneralCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.8
INT l2ThashCurCfgDipState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7.1.7	INTEGER	read-only	Enable or disable dip hash.
INT l2ThashCurCfgDmacState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7.1.3	INTEGER	read-only	Enable or disable dmac hash.
INT l2ThashCurCfgSipState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7.1.5	INTEGER	read-only	Enable or disable sip hash.
INT l2ThashCurCfgSmacState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7.1.1	INTEGER	read-only	Enable or disable smac hash.
INT l2ThashNewCfgDipState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7.1.8	INTEGER	read-write	Enable or disable dip hash.
INT l2ThashNewCfgDmacState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7.1.4	INTEGER	read-write	Enable or disable dmac hash.
INT l2ThashNewCfgSipState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7.1.6	INTEGER	read-write	Enable or disable sip hash.
INT l2ThashNewCfgSmacState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7.1.2	INTEGER	read-write	Enable or disable smac hash.
lacp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6
INT lacpClearStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.10	INTEGER	read-write	Setting this to clear(2) results in clearing the LACP statistics.
INT lacpCurPortActorAdminKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.7.1.4	INTEGER	read-only	The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.
INT lacpCurPortActorPortPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.7.1.3	INTEGER	read-only	The priority value assigned to this Aggregation Port. This 16-bit value is read-only.
lacpCurPortCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.7		not-accessible	The table of LACP port configuration.
lacpCurPortCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.7.1		not-accessible	A row in the LACP port configuration table.
I32 lacpCurPortCfgTableId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.7.1.1	Integer32	read-only	LACP port number.
INT lacpCurPortState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.7.1.2	INTEGER	read-only	LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer.
INT lacpCurSystemPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.1	INTEGER	read-only	A 2-octet read-write value indicating the priority value associated with the Actor's System ID.
INT lacpCurSystemTimeoutTime	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.5	INTEGER	read-only	If a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).
I32 lacpdusRx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.2	Integer32	read-only	Valid LACPDUs received
I32 lacpdusTx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.7	Integer32	read-only	LACPDUs transmitted
lacpInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4
I32 lacpInfoAggrActAdminKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.7	Integer32	read-only
I32 lacpInfoAggrActOperKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.8	Integer32	read-only
STR lacpInfoAggrActSysId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.5	DisplayString	read-only
I32 lacpInfoAggrActSysPrio	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.4	Integer32	read-only
I32 lacpInfoAggrId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.2	Integer32	read-only
I32 lacpInfoAggrIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.1	Integer32	read-only	The aggregator identifier.
INT lacpInfoAggrIndivState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.6	INTEGER	read-only
STR lacpInfoAggrMac	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.3	DisplayString	read-only
I32 lacpInfoAggrNumPorts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.13	Integer32	read-only
I32 lacpInfoAggrPartOperKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.11	Integer32	read-only
STR lacpInfoAggrPartSysId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.10	DisplayString	read-only
I32 lacpInfoAggrPartSysPrio	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.9	Integer32	read-only
STR lacpInfoAggrPorts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.14	DisplayString	read-only
INT lacpInfoAggrReadyState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.12	INTEGER	read-only
lacpInfoAggrTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1		not-accessible	The table of LACP aggregator information.
lacpInfoAggrTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1		not-accessible	Information about a LACP aggregator.
I32 lacpInfoAttAggrId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.12	Integer32	read-only
INT lacpInfoCollDetState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.17	INTEGER	read-only
lacpInfoPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2
INT lacpInfoPortActAdActiv	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.8	INTEGER	read-only
INT lacpInfoPortActAdAggr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.14	INTEGER	read-only
INT lacpInfoPortActAdColl	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.12	INTEGER	read-only
INT lacpInfoPortActAdDef	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.10	INTEGER	read-only
INT lacpInfoPortActAdDist	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.15	INTEGER	read-only
INT lacpInfoPortActAdExp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.13	INTEGER	read-only
I32 lacpInfoPortActAdminKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.6	Integer32	read-only
STR lacpInfoPortActAdPortState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.7	DisplayString	read-only	The state of Actor Administrator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregation and Distributing. If all of them are 0 then the state is showed as 0x0, else it is displayed a blank state which mean is not a NULL state
INT lacpInfoPortActAdSync	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.9	INTEGER	read-only
INT lacpInfoPortActAdTimeout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.11	INTEGER	read-only
INT lacpInfoPortActOpActiv	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.8	INTEGER	read-only
INT lacpInfoPortActOpAggr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.14	INTEGER	read-only
INT lacpInfoPortActOpColl	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.12	INTEGER	read-only
INT lacpInfoPortActOpDef	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.10	INTEGER	read-only
INT lacpInfoPortActOpDist	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.15	INTEGER	read-only
I32 lacpInfoPortActOperKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.7	Integer32	read-only
INT lacpInfoPortActOpExp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.13	INTEGER	read-only
STR lacpInfoPortActOpPortState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.7	DisplayString	read-only	The state of Actor Operator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregation and Distributing. If all of them are 0 then the state is showed as 0x0, else it is displayed a blank state which mean is not a NULL state
INT lacpInfoPortActOpSync	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.9	INTEGER	read-only
INT lacpInfoPortActOpTimeout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.11	INTEGER	read-only
I32 lacpInfoPortActPortNum	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.8	Integer32	read-only
I32 lacpInfoPortActPortPrio	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.9	Integer32	read-only
STR lacpInfoPortActSysId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.4	DisplayString	read-only
I32 lacpInfoPortActSysPrio	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.5	Integer32	read-only
INT lacpInfoPortAdminEna	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.3	INTEGER	read-only
I32 lacpInfoPortAdminIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.1	Integer32	read-only	The port identifier.
lacpInfoPortAdminTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2		not-accessible	The table of LACP port admin information.
lacpInfoPortAdminTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1		not-accessible	Admin information about a LACP port.
I32 lacpInfoPortGeneralIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.1	Integer32	read-only	The port identifier.
lacpInfoPortGeneralTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1		not-accessible	The table of LACP port general information.
lacpInfoPortGeneralTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1		not-accessible	General information about a LACP port.
INT lacpInfoPortIndivState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.10	INTEGER	read-only
INT lacpInfoPortLacpEna	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.2	INTEGER	read-only
INT lacpInfoPortMoved	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.16	INTEGER	read-only	Port Moved flag is set to true if the receive machine for a port is in the port_disabled state, and the combination of partner oper system and partner oper port number in use by the port has been used by received in an incoming LACPDU on a different port.
STR lacpInfoPortMuxState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.19	DisplayString	read-only
INT lacpInfoPortNtt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.14	INTEGER	read-only	Need to transmit flag. True indicates that there is new protocol information that should be transmitted on the link.
I32 lacpInfoPortOperIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.1	Integer32	read-only	The port identifier.
lacpInfoPortOperTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3		not-accessible	The table of LACP port oper information.
lacpInfoPortOperTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1		not-accessible	Oper information about a LACP port.
INT lacpInfoPortPartOpActiv	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.17	INTEGER	read-only
INT lacpInfoPortPartOpAggr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.23	INTEGER	read-only
INT lacpInfoPortPartOpColl	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.21	INTEGER	read-only
INT lacpInfoPortPartOpDef	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.19	INTEGER	read-only
INT lacpInfoPortPartOpDist	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.24	INTEGER	read-only
INT lacpInfoPortPartOpExp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.22	INTEGER	read-only
I32 lacpInfoPortPartOpKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.4	Integer32	read-only
I32 lacpInfoPortPartOpPortNum	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.5	Integer32	read-only
I32 lacpInfoPortPartOpPortPrio	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.6	Integer32	read-only
STR lacpInfoPortPartOpPortState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.16	DisplayString	read-only	The state of Partner Operator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregation and Distributing. If all of them are 0 then the state is showed as 0x0, else it is displayed a blank state which mean is not a NULL state
INT lacpInfoPortPartOpSync	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.18	INTEGER	read-only
STR lacpInfoPortPartOpSysId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.3	DisplayString	read-only
I32 lacpInfoPortPartOpSysPrio	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.2	Integer32	read-only
INT lacpInfoPortPartOpTimeout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.20	INTEGER	read-only
STR lacpInfoPortPerState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.20	DisplayString	read-only
INT lacpInfoPortReadyN	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.13	INTEGER	read-only	True value for Ready_N flag indicates that the wait while timer has expired and it is waiting to attach to an aggregator. There is one Ready_N value for each port.
STR lacpInfoPortRxState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.18	DisplayString	read-only
INT lacpInfoPortSelected	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.15	INTEGER	read-only	Selected flag value indicates that the selection logic has selected an appropriate Aggregator. A value of unselected indicates that no aggregator is currently selected. A value of standby indicates that although the selection logic has selected an appropriate Aggregator, aggregation restrictions currently precent the port from being enabled as part of the aggregation, and so the port is being held in standby condition.
I32 lacpInfoSelAggrId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.11	Integer32	read-only
INT lacpNewPortActorAdminKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1.4	INTEGER	read-write	The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance.
INT lacpNewPortActorPortPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1.3	INTEGER	read-write	The priority value assigned to this Aggregation Port. This 16-bit value is read-write.
lacpNewPortCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8		not-accessible	The table of LACP port configuration.
lacpNewPortCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1		not-accessible	A row in the LACP port configuration table.
I32 lacpNewPortCfgTableId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1.1	Integer32	read-only	LACP port number.
INT lacpNewPortState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1.2	INTEGER	read-write	LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer.
INT lacpNewSystemPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.2	INTEGER	read-write	A 2-octet read-write value indicating the priority value associated with the Actor's System ID.
INT lacpNewSystemTimeoutTime	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.6	INTEGER	read-write	If a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).
lacpStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3
I32 lacpStatsIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.1	Integer32	read-only	Index
lacpStatsTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1		not-accessible	The table of LACP Stats.
lacpStatsTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1		not-accessible	Lacp status info.
MAC lastEapolFrameSource	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.31	MacAddress	read-only
I32 lastEapolFrameVersion	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.30	Integer32	read-only
layer2	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2
layer2Configs	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1
layer2Info	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3
layer2Oper	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.4
layer2Stats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2
layer3	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3
layer3Configs	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1
layer3Info	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3
layer3Oper	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.4
layer3Stats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2
I32 markerpdusRx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.3	Integer32	read-only	Valid Marker PDUs received
I32 markerpdusTx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.8	Integer32	read-only	Market PDUs transmitted
I32 markerresponsepdusRx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.4	Integer32	read-only	Valid Marker Rsp PDUs received
I32 markerresponsepdusTx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.9	Integer32	read-only	Marker Rsp PDUs transmitted
I32 maxBlockInLpmTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.15.5	Integer32	read-only	Max number of blocks in LPM table
I32 maxL3TableSize	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.15.1	Integer32	read-only	Max L3 table size
I32 maxLpmTableSize	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.15.3	Integer32	read-only	Max LPM table size
mirroring	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4
mirrPortMirr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1
mpCpuStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.2
I32 mpCpuStatsUtil1Second	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.2.1	Integer32	read-only	The utilization of MP CPU over 1 second. It shows the percentage.
I32 mpCpuStatsUtil4Seconds	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.2.2	Integer32	read-only	The utilization of MP CPU over 4 seconds. It shows the percentage.
I32 mpCpuStatsUtil64Seconds	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.2.3	Integer32	read-only	The utilization of MP CPU over 64 seconds. It shows the percentage.
mstCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5
mstCistBridgeCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2
mstCistCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2
INT mstCistCurCfgBridgeForwardDelay	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2.7	INTEGER	read-only	The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
INT mstCistCurCfgBridgeMaxAge	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2.5	INTEGER	read-only	The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
INT mstCistCurCfgBridgePriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2.1	INTEGER	read-only	The value of the writable portion of the Brigde Identifier comprising of the first two octets.
INT mstCistCurCfgPortEdge	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.5	INTEGER	read-only	The value of the Edge Port parameter.
INT mstCistCurCfgPortHelloTime	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.7	INTEGER	read-only	The amount of time between the transmission of Configuration Port PDUs in seconds.
I32 mstCistCurCfgPortIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.1	Integer32	read-only	The port number of the port for which this entry contains spanning tree configuration.
INT mstCistCurCfgPortLinkType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.4	INTEGER	read-only	The administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port should be treated as having a shared media connection. A value of auto(1) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.
INT mstCistCurCfgPortPathCost	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.3	INTEGER	read-only	The contribution of this port to the path cost of paths towards the CIST Root which include this port.
INT mstCistCurCfgPortPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.2	INTEGER	read-only	The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
INT mstCistCurCfgPortStpState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.6	INTEGER	read-only	Turn port's Spanning Tree on/off.
mstCistCurCfgPortTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3		not-accessible	The table of CIST Port configuration.
mstCistCurCfgPortTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1		not-accessible	Information about a particular CIST Port configuration.
OCT mstCistCurCfgVlanBmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2.9	OCTET STRING	read-only	The vlans applied to the CIST group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4094. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ vlan 9 \|\| \|\| \|\| \|\|___ vlan 8 \|\| \|____ vlan 7 \|\| . . . \|\|_________ vlan 2 \|__________ vlan 1 where x : 1 - The represented vlan applied to the CIST group. 0 - The represented vlan not applied to the group
INT mstCistDefaultCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.1	INTEGER	read-write	Setting the value to default(1) will set the Multiple Spanning Tree and member parameters to default. default(1) is always returned when read, but it does not mean anything.
I32 mstCistNewCfgAddVlan	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2.11	Integer32	read-create	The vlan to be added to the CIST Group. A '0' value is returned when read.
INT mstCistNewCfgBridgeForwardDelay	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2.8	INTEGER	read-write	The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
INT mstCistNewCfgBridgeMaxAge	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2.6	INTEGER	read-write	The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
INT mstCistNewCfgBridgePriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2.2	INTEGER	read-write	The value of the writable portion of the Brigde Identifier comprising of the first two octets.
INT mstCistNewCfgPortEdge	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.5	INTEGER	read-create	The value of the Edge Port parameter.
INT mstCistNewCfgPortHelloTime	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.7	INTEGER	read-create	The amount of time between the transmission of Configuration Port PDUs in seconds.
I32 mstCistNewCfgPortIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.1	Integer32	read-only	The port number of the port for which this entry contains spanning tree configuration.
INT mstCistNewCfgPortLinkType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.4	INTEGER	read-create	The administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port should be treated as having a shared media connection. A value of auto(1) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.
INT mstCistNewCfgPortPathCost	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.3	INTEGER	read-create	The contribution of this port to the path cost of paths towards the CIST Root which include this port.
INT mstCistNewCfgPortPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.2	INTEGER	read-create	The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
INT mstCistNewCfgPortStpState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.6	INTEGER	read-create	Turn port's Spanning Tree on/off.
mstCistNewCfgPortTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4		not-accessible	The table of CIST Port configuration.
mstCistNewCfgPortTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1		not-accessible	Information about a particular CIST Port configuration.
OCT mstCistNewCfgVlanBmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2.10	OCTET STRING	read-only	The vlans applied to the CIST group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4094. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ vlan 9 \|\| \|\| \|\| \|\|___ vlan 8 \|\| \|____ vlan 7 \|\| . . . \|\|_________ vlan 2 \|__________ vlan 1 where x : 1 - The represented vlan applied to the CIST group. 0 - The represented vlan not applied to the group
INT mstCurCfgMaxHopCount	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.7	INTEGER	read-only	Indicates the maximum hop count value.
STR mstCurCfgRegionName	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.3	DisplayString	read-only	The Name for the Region's configuration.
INT mstCurCfgRegionVersion	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.5	INTEGER	read-only	Version of the MST Region.
INT mstCurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.1	INTEGER	read-only	Enable or disable MSTP/RSTP
INT mstCurCfgStpMode	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.9	INTEGER	read-only	The version of Spanning Tree Protocal the bridge is currently running.
mstGeneralCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1
INT mstNewCfgMaxHopCount	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.8	INTEGER	read-write	Indicates the maximum hop count value.
STR mstNewCfgRegionName	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.4	DisplayString	read-write	The Name for the Region's configuration.
INT mstNewCfgRegionVersion	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.6	INTEGER	read-write	Version of the MST Region.
INT mstNewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.2	INTEGER	read-write	Enable or disable MSTP/RSTP
INT mstNewCfgStpMode	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.10	INTEGER	read-write	The version of Spanning Tree Protocal the bridge is currently running.
STR mstpDigest	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.13	DisplayString	read-only	The digest of the mstp.
I32 noBlocksUsedInLpmTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.15.6	Integer32	read-only	Number of blocks used in LPM table
I32 noL3EntriesUsed	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.15.2	Integer32	read-only	Number of L3 entries used
I32 noLpmEntriesUsed	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.15.4	Integer32	read-only	Number of LPM entries used
INT ntpClearStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.9	INTEGER	read-write	Setting this value to clear(2) clears the stats for ntp.
INT ntpLastUpdateServer	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.7	INTEGER	read-only	The type of ntp server updated last time.
STR ntpLastUpdateTime	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.8	DisplayString	read-only	The last time updated by ntp server.
INT ntpOperSendReq	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.2.1	INTEGER	read-write	Allows the user to send requests to the NTP server.
I32 ntpPrimaryServerReqSent	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.1	Integer32	read-only	The total number of NTP requests sent to Primary NTP Server.
I32 ntpPrimaryServerRespRcvd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.2	Integer32	read-only	The total number of NTP responces received from Primary NTP Server.
I32 ntpPrimaryServerUpdates	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.3	Integer32	read-only	The total number of NTP Updates by Primary NTP Server.
I32 ntpSecondaryServerReqSent	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.4	Integer32	read-only	The total number of NTP requests sent to Secondary NTP Server.
I32 ntpSecondaryServerRespRcvd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.5	Integer32	read-only	The total number of NTP responces received from Secondary NTP Server.
I32 ntpSecondaryServerUpdates	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.6	Integer32	read-only	The total number of NTP Updates by Secondary NTP Server.
ntpStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9
STR ntpSystemCurrentTime	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.10	DisplayString	read-only	The current system time.
ospfArea	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2
INT ospfAreaBorderRouter	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.6	INTEGER	read-only	Area Border Router Role.
INT ospfAreaBoundaryRouter	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.7	INTEGER	read-only	Area Boundary Router Role.
ospfAreaChangeStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3		not-accessible	The table of OSPF Area Change Statistics.
ospfAreaChangeStatsEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3.1		not-accessible	Area Change Statistics about a OSPF area.
C32 ospfAreaErrAreaMismatch	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4.1.8	Counter32	read-only	The total number of packets received with a wrong area.
C32 ospfAreaErrAuthFailure	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4.1.2	Counter32	read-only	The total number of packets received with a wrong password in this area.
C32 ospfAreaErrDeadMismatch	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4.1.5	Counter32	read-only	The total number of packets received with a different dead interval in this area.
C32 ospfAreaErrHelloMismatch	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4.1.4	Counter32	read-only	The total number of packets received with a different hello interval in this area.
I32 ospfAreaErrIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4.1.1	Integer32	read-only	The index of the OSPF Area for which these statistics apply.
C32 ospfAreaErrNetmaskMismatch	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4.1.3	Counter32	read-only	The total number of packets received with a wrong netmask in this area.
C32 ospfAreaErrOptionsMismatch	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4.1.6	Counter32	read-only	The total number of packets received with a different options in this area.
ospfAreaErrorStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4		not-accessible	The table of OSPF Area Error Statistics.
ospfAreaErrorStatsEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4.1		not-accessible	Error Statistics for an OSPF area.
C32 ospfAreaErrUnknownNbr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4.1.7	Counter32	read-only	The total number of packets received from an unknown neighbor in this area.
I32 ospfAreaInfoAreaBorderRouter	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.9	Integer32	read-only	The Area Border Router count.
I32 ospfAreaInfoASBoundaryRouter	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.10	Integer32	read-only	The AS Boundary Router count.
INT ospfAreaInfoAuthType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.6	INTEGER	read-only	Type of authentication being used: none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
ospfAreaInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1		not-accessible	Information about a OSPF area.
IP ospfAreaInfoId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.2	IpAddress	read-only	The IP address of the OSPF area.
I32 ospfAreaInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.1	Integer32	read-only	The OSPF area number for which the OSPF info table is related.
STR ospfAreaInfoLsTypesAccepted	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.15	DisplayString	read-only	LS types accepted by this area.
I32 ospfAreaInfoNeighborsEXCHstate	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.13	Integer32	read-only	Total neighbors in EXCH state.
I32 ospfAreaInfoNeighborsFULLstate	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.14	Integer32	read-only	Total neighbors in FULL state.
I32 ospfAreaInfoNeighborsINITstate	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.12	Integer32	read-only	Total neighbors in INIT state.
I32 ospfAreaInfoSPF	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.7	Integer32	read-only	The number of times SPF ran.
INT ospfAreaInfoStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.3	INTEGER	read-only	Area Status: disabled(0), enabled(1).
ospfAreaInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2		not-accessible	The table of OSPF Area information.
I32 ospfAreaInfoTotalNeighbours	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.11	Integer32	read-only	The total number of OSPF neighbors.
C32 ospfAreaIntfBackup	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3.1.7	Counter32	read-only	The total number of Backup Designated Routers on the attatched network for this OSPF area.
C32 ospfAreaIntfDown	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3.1.3	Counter32	read-only	The total number of interfaces down in this OSPF area.
C32 ospfAreaIntfHello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3.1.2	Counter32	read-only	The total number of Hello packets sent on this OSPF area.
I32 ospfAreaIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3.1.1	Integer32	read-only	The index of the OSPF Area for which these statistics apply.
C32 ospfAreaIntfLoop	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3.1.4	Counter32	read-only	The total number of interfaces no longer connected to the attatched network in this OSPF area.
C32 ospfAreaIntfNbrChange	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3.1.8	Counter32	read-only	The total number of changes in the set of bidirectional neighbours associated with the interface in this OSPF area.
C32 ospfAreaIntfUnloop	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3.1.5	Counter32	read-only	The total number of interfaces connected to the attatched network in this OSPF area..
C32 ospfAreaIntfWaitTimer	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3.1.6	Counter32	read-only	The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF area.
C32 ospfAreaNbrAdjointOk	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.4	Counter32	read-only	The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF area.
C32 ospfAreaNbrBadRequests	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.7	Counter32	read-only	The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across this OSPF area.
C32 ospfAreaNbrBadSequence	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.8	Counter32	read-only	The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this OSPF area.
ospfAreaNbrChangeStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2		not-accessible	The table of OSPF Area Neighbour Statistics.
ospfAreaNbrChangeStatsEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1		not-accessible	Area Neighbour Change Statistics about a OSPF area.
C32 ospfAreaNbrDown	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.12	Counter32	read-only	The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) in this OSPF area.
C32 ospfAreaNbrExchangeDone	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.6	Counter32	read-only	The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF area.
C32 ospfAreaNbrhello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.2	Counter32	read-only	The total number of Hello packets received from neighbours in this OSPF area.
I32 ospfAreaNbrIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.1	Integer32	read-only	The index of the ospf Area for which these statistics apply.
C32 ospfAreaNbrLoadingDone	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.9	Counter32	read-only	The total number of link state updates received for all out-of-date portions of the database in this OSPF area.
C32 ospfAreaNbrN1way	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.10	Counter32	read-only	The total number of Hello packets received from neighbours, in which this router is not mentioned in this OSPF area.
C32 ospfAreaNbrN2way	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.13	Counter32	read-only	The total number of Hello packets received from neighbours, in which this router is mentioned in this OSPF area.
C32 ospfAreaNbrNegotiationDone	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.5	Counter32	read-only	The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF area.
C32 ospfAreaNbrRstAd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.11	Counter32	read-only	The total number of times the Neighbour adjacency has been reset across this OPSF area.
C32 ospfAreaNbrStart	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.3	Counter32	read-only	The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF area.
C32 ospfAreaRxDatabase	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.6	Counter32	read-only	The total number of Database Description packets transmitted for this OSPF area.
C32 ospfAreaRxHello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.4	Counter32	read-only	The total number of Hello packets received in this OSPF area.
C32 ospfAreaRxlsAcks	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.10	Counter32	read-only	The total number of Link State Acknowledgement packets received for this OSPF area.
C32 ospfAreaRxlsReqs	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.8	Counter32	read-only	The total number of Link State Request packets received for this OSPF area.
C32 ospfAreaRxlsUpdates	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.12	Counter32	read-only	The total number of Link State Update packets received for this OSPF area.
C32 ospfAreaRxPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.2	Counter32	read-only	The total number of OSPF packets received in this OSPF area.
I32 ospfAreaRxTxIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.1	Integer32	read-only	The index of the ospf Area for which these statistics apply.
ospfAreaRxTxStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1		not-accessible	The table of OSPF Area Rx/Tx Statistics.
ospfAreaRxTxStatsEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1		not-accessible	Rx Tx packet Statistics about a OSPF area.
I32 ospfAreaTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.6	Integer32	read-only	The maximum number of rows in the OSPF Area table.
C32 ospfAreaTxDatabase	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.7	Counter32	read-only	The total number of Database Description packets transmitted for this OSPF area.
C32 ospfAreaTxHello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.5	Counter32	read-only	The total number of Hello packets transmitted in this OSPF area.
C32 ospfAreaTxlsAcks	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.11	Counter32	read-only	The total number of Link State Acknowledgement packets transmitted for this OSPF area.
C32 ospfAreaTxlsReqs	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.9	Counter32	read-only	The total number of Link State Request packets transmitted for this OSPF area.
C32 ospfAreaTxlsUpdates	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.13	Counter32	read-only	The total number of Link State Update packets transmitted for this OSPF area.
C32 ospfAreaTxPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.3	Counter32	read-only	The total number of OSPF packets transmitted in this OSPF area.
ospfCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13
INT ospfClearStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.5	INTEGER	read-write	Setting this to clear(1) results in clearing the OSPF statistics.
C32 ospfCumIntfBackup	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.3.6	Counter32	read-only	The sum total number of Backup Designated Routers on the attatched network for all OSPF areas and interfaces.
ospfCumIntfChangeStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.3
C32 ospfCumIntfDown	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.3.2	Counter32	read-only	The sum total number of interfaces down in all OSPF areas.
C32 ospfCumIntfHello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.3.1	Counter32	read-only	The sum total number of Hello packets sent on all interfaces and areas
C32 ospfCumIntfLoop	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.3.3	Counter32	read-only	The sum total of interfaces no longer connected to the attatched network across all OSPF areas and interfaces.
C32 ospfCumIntfNbrChange	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.3.7	Counter32	read-only	The sum total number of changes in the set of bidirectional neighbours associated with any interface across all OSPF areas.
C32 ospfCumIntfUnloop	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.3.4	Counter32	read-only	The sum total number of interfaces, connected to the attatched network in all OSPF areas.
C32 ospfCumIntfWaitTimer	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.3.5	Counter32	read-only	The sum total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) across all OSPF areas and interfaces.
C32 ospfCumNbrAdjointOk	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.3	Counter32	read-only	The sum total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour across all OSPF areas and interfaces.
C32 ospfCumNbrBadRequests	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.6	Counter32	read-only	The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across all interfaces and OSPF areas.
C32 ospfCumNbrBadSequence	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.7	Counter32	read-only	The sum total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for all OSPF areas and interfaces.
ospfCumNbrChangeStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2
C32 ospfCumNbrDown	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.11	Counter32	read-only	The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) across all OSPF areas and interfaces.
C32 ospfCumNbrExchangeDone	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.5	Counter32	read-only	The sum total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, across all OSPF areas and interfaces.
C32 ospfCumNbrhello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.1	Counter32	read-only	The sum total of all Hello packets received from neighbours on all OSPF areas and interfaces.
C32 ospfCumNbrLoadingDone	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.8	Counter32	read-only	The sum total number of link state updates received for all out-of-date portions of the database across all OSPF areas and interfaces.
C32 ospfCumNbrN1way	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.9	Counter32	read-only	The sum total number of Hello packets received from neighbours, in which this router is not mentioned across all OSPF interfaces and areas.
C32 ospfCumNbrN2way	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.12	Counter32	read-only	The sum total number of Hello packets received from neighbours, in which this router is mentioned across all OSPF interfaces and areas.
C32 ospfCumNbrNegotiationDone	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.4	Counter32	read-only	The sum total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, across all OSPF areas and interfaces.
C32 ospfCumNbrRstAd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.10	Counter32	read-only	The sum total number of times the Neighbour adjacency has been reset across all OPSF areas and interfaces.
C32 ospfCumNbrStart	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.2	Counter32	read-only	The sum total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) across all OSPF areas and interfaces.
C32 ospfCumRxDatabase	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.5	Counter32	read-only	The sum total of all Database Description packets received on all OSPF areas and interfaces.
C32 ospfCumRxHello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.3	Counter32	read-only	The sum total of all Hello packets received on all OSPF areas and interfaces.
C32 ospfCumRxlsAcks	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.9	Counter32	read-only	The sum total of all Link State Acknowledgement packets received on all OSPF areas and interfaces.
C32 ospfCumRxlsReqs	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.7	Counter32	read-only	The sum total of all Link State Request packets received on all OSPF areas and interfaces.
C32 ospfCumRxlsUpdates	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.11	Counter32	read-only	The sum total of all Link State Update packets received on all OSPF areas and interfaces.
C32 ospfCumRxPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.1	Counter32	read-only	The sum total of all OSPF packets received on all OSPF areas and interfaces.
ospfCumRxTxStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1
C32 ospfCumTxDatabase	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.6	Counter32	read-only	The sum total of all Database Description packets transmitted on all OSPF areas and interfaces.
C32 ospfCumTxHello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.4	Counter32	read-only	The sum total of all Hello packets transmitted on all OSPF areas and interfaces.
C32 ospfCumTxlsAcks	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.10	Counter32	read-only	The sum total of all Link State Acknowledgement packets transmitted on all OSPF areas and interfaces.
C32 ospfCumTxlsReqs	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.8	Counter32	read-only	The sum total of all Link State Request packets transmitted on all OSPF areas and interfaces.
C32 ospfCumTxlsUpdates	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.12	Counter32	read-only	The sum total of all Link State Update packets transmitted on all OSPF areas and interfaces.
C32 ospfCumTxPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.2	Counter32	read-only	The sum total of all OSPF packets transmitted on all OSPF areas and interfaces.
INT ospfCurCfgAreaAuthType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.2.1.4	INTEGER	read-only	Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
ospfCurCfgAreaEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.2.1		not-accessible	Information about a OSPF area.
IP ospfCurCfgAreaId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.2.1.2	IpAddress	read-only	The IP Address of the OSPF area.
I32 ospfCurCfgAreaIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.2.1.1	Integer32	read-only	The OSPF area number for which the OSPF area table is related.
INT ospfCurCfgAreaMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.2.1.6	INTEGER	read-only	Metric (1-65535)
INT ospfCurCfgAreaSpfInterval	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.2.1.3	INTEGER	read-only	The SPF interval for the OSPF area.
INT ospfCurCfgAreaStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.2.1.7	INTEGER	read-only	Status disabled(0) enabled(1)
ospfCurCfgAreaTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.2		not-accessible	The table of OSPF Area configuration in the current_config.
INT ospfCurCfgAreaType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.2.1.5	INTEGER	read-only	Type of Area. transit(0) stub(1) nssa(2)
INT ospfCurCfgDefaultRouteMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.1	INTEGER	read-only	Specify the metric to be assigned.
INT ospfCurCfgDefaultRouteMetricType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.3	INTEGER	read-only	Specify the AS External metric type to be assigned.
INT ospfCurCfgFixedMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.4.1	INTEGER	read-only	The export metric for fixed routes. A value of 0 indicates none
INT ospfCurCfgFixedMetricType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.4.3	INTEGER	read-only	The AS External metric type for fixed routes.
OCT ospfCurCfgFixedOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.4.5	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ospfCurCfgHostAreaIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.12.1.3	Integer32	read-only	The area index.
INT ospfCurCfgHostCost	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.12.1.4	INTEGER	read-only	The cost of the OSPF host.
ospfCurCfgHostEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.12.1		not-accessible	Information about a OSPF host.
I32 ospfCurCfgHostIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.12.1.1	Integer32	read-only	The OSPF host number for which the OSPF host table is related.
IP ospfCurCfgHostIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.12.1.2	IpAddress	read-only	The IP Address of the OSPF host.
INT ospfCurCfgHostState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.12.1.5	INTEGER	read-only	Enable or disable an OSPF Host
ospfCurCfgHostTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.12		not-accessible	The table of OSPF Host configuration.
INT ospfCurCfgIntfArea	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.3	INTEGER	read-only	The index of the area that the interface belongs
STR ospfCurCfgIntfAuthKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.11	DisplayString	read-only	Authentication Key
INT ospfCurCfgIntfCost	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.5	INTEGER	read-only	Interface cost
INT ospfCurCfgIntfDead	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.8	INTEGER	read-only	Dead interval
ospfCurCfgIntfEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1		not-accessible	Information about an OSPF Interface.
INT ospfCurCfgIntfHello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.7	INTEGER	read-only	Hello interval
IP ospfCurCfgIntfId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.2	IpAddress	read-only	The IP Address of the OSPF interface.
I32 ospfCurCfgIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.1	Integer32	read-only	The OSPF Interface number for which the OSPF Interface table is related.
INT ospfCurCfgIntfMdkey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.4	INTEGER	read-only	The MD5 key for the OSPF interface 0 (none) no MD5 authentication.
INT ospfCurCfgIntfPrio	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.6	INTEGER	read-only	Interface router priority
INT ospfCurCfgIntfRetra	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.10	INTEGER	read-only	Retransmit interval
INT ospfCurCfgIntfStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.12	INTEGER	read-only	Status of the interface disabled(0), enabled(1)
ospfCurCfgIntfTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7		not-accessible	The table of OSPF Interface configuration in the current_config.
INT ospfCurCfgIntfTrans	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.9	INTEGER	read-only	Transit delay
I32 ospfCurCfgLSDB	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.12	Integer32	read-only	The LSDB limit for external LSA.
ospfCurCfgMdkeyEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.5.1		not-accessible	Information about an OSPF MD keys table.
I32 ospfCurCfgMdkeyIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.5.1.1	Integer32	read-only	The OSPF MD5 Key number for which the OSPF MdKey table is related.
STR ospfCurCfgMdkeyKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.5.1.2	DisplayString	read-only	The character string representing the MD5 Key.
ospfCurCfgMdkeyTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.5		not-accessible	The table of OSPF MD5 keys in the current_config.
IP ospfCurCfgRangeAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.14.1.2	IpAddress	read-only	The IP Address of the range.
I32 ospfCurCfgRangeAreaIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.14.1.4	Integer32	read-only	The area index.
ospfCurCfgRangeEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.14.1		not-accessible	Information about an OSPF summary range.
INT ospfCurCfgRangeHideState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.14.1.5	INTEGER	read-only	The state of the hide range.
I32 ospfCurCfgRangeIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.14.1.1	Integer32	read-only	The range number for which the OSPF summary range table is related.
IP ospfCurCfgRangeMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.14.1.3	IpAddress	read-only	The mask of the range.
INT ospfCurCfgRangeState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.14.1.6	INTEGER	read-only	The state of the range.
ospfCurCfgRangeTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.14		not-accessible	The table of OSPF summary range in the current configuration.
INT ospfCurCfgRipMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.5.1	INTEGER	read-only	The export metric for RIP routes. A value of 0 indicates none
INT ospfCurCfgRipMetricType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.5.3	INTEGER	read-only	The AS External metric type for RIP routes.
OCT ospfCurCfgRipOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.5.5	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
INT ospfCurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.10	INTEGER	read-only	OSPF global state.
INT ospfCurCfgStaticMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.1.1	INTEGER	read-only	The metric to be assigned to static routes. A value of 0 indicates none.
INT ospfCurCfgStaticMetricType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.1.3	INTEGER	read-only	The AS External metric type for static routes.
OCT ospfCurCfgStaticOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.1.5	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
INT ospfCurCfgVirtIntfAreaId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.2	INTEGER	read-only	The index of the OSPF area to which this virtual interface belongs.
STR ospfCurCfgVirtIntfAuthKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.9	DisplayString	read-only	Authentication Key
INT ospfCurCfgVirtIntfDead	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.6	INTEGER	read-only	Dead interval
ospfCurCfgVirtIntfEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1		not-accessible	Information about an OSPF virtual Interface.
INT ospfCurCfgVirtIntfHello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.5	INTEGER	read-only	Hello interval
I32 ospfCurCfgVirtIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.1	Integer32	read-only	The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related.
INT ospfCurCfgVirtIntfMdkey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.4	INTEGER	read-only	The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
IP ospfCurCfgVirtIntfNbr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.3	IpAddress	read-only	The IP Address of the OSPF neighbor for this virtual interface.
INT ospfCurCfgVirtIntfRetra	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.8	INTEGER	read-only	Retransmit interval
INT ospfCurCfgVirtIntfStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.10	INTEGER	read-only	Status disabled(0), enabled(1)
ospfCurCfgVirtIntfTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9		not-accessible	The table of OSPF Virtual Interface configuration in the current_config.
INT ospfCurCfgVirtIntfTrans	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.7	INTEGER	read-only	Transit delay
I32 ospfExternalLsa	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.8	Integer32	read-only	The number of external LSAs.
OCT ospfExtLsdbInfoAdvertisement	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9.1.8	OCTET STRING	read-only	The entire Link State Advertisement, including its header.
I32 ospfExtLsdbInfoAge	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9.1.6	Integer32	read-only	This field is the age of the link state adver- tisement in seconds.
I32 ospfExtLsdbInfoChecksum	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9.1.7	Integer32	read-only	This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
ospfExtLsdbInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9.1		not-accessible	A single Link State Advertisement.
I32 ospfExtLsdbInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9.1.1	Integer32	read-only	The 32 bit index in the table.
IP ospfExtLsdbInfoLsid	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9.1.3	IpAddress	read-only	The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
IP ospfExtLsdbInfoRouterId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9.1.4	IpAddress	read-only	The 32 bit number that uniquely identifies the originating router in the Autonomous System.
OCT ospfExtLsdbInfoSequence	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9.1.5	OCTET STRING	read-only	The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement - displayed here in hexazecimal.
ospfExtLsdbInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9		not-accessible	The OSPF Process's Links State Database.
INT ospfExtLsdbInfoType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9.1.2	INTEGER	read-only	The type of the link state advertisement. Each link state type has a separate advertise- ment format.
ospfGeneral	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1
ospfGeneralInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1
ospfGeneralStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1
I32 ospfHostTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.9	Integer32	read-only	The maximum number of rows in the OSPF Host table.
INT ospfIfInfoAdminStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.4	INTEGER	read-only	Admin Status of the interface: down(0), up(1).
INT ospfIfInfoArea	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.3	INTEGER	read-only	The index of the area that the interface belongs.
INT ospfIfInfoAuthType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.19	INTEGER	read-only	Type of authentication being used: none(1) - no authentication, password(2) - use password, md5(3) - use MD5 authentication.
IP ospfIfInfoBackupDesignatedRouterID	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.10	IpAddress	read-only	The OSPF Backup Designated Router ID for this OSPF interface.
IP ospfIfInfoBackupDesignatedRouterIpAddress	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.11	IpAddress	read-only	The OSPF Backup Designated Router Ip Address for this OSPF interface.
INT ospfIfInfoDead	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.13	INTEGER	read-only	The dead timer for this OSPF interface.
IP ospfIfInfoDesignatedRouterID	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.8	IpAddress	read-only	The OSPF Designated Router ID for this OSPF interface.
IP ospfIfInfoDesignatedRouterIpAddress	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.9	IpAddress	read-only	The OSPF Designated Router IP Address for this OSPF interface.
I32 ospfIfInfoEvents	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.18	Integer32	read-only	The total number of events for this OSPF interface.
INT ospfIfInfoHello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.12	INTEGER	read-only	The hello timer for this OSPF interface.
I32 ospfIfInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.1	Integer32	read-only	The OSPF interface number for which the OSPF info table is related.
IP ospfIfInfoIpAddress	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.2	IpAddress	read-only	The IP address of the OSPF interface.
INT ospfIfInfoPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.7	INTEGER	read-only	Interface router priority
INT ospfIfInfoRetransmit	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.15	INTEGER	read-only	The retransmit interval for this OSPF interface.
IP ospfIfInfoRouterID	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.5	IpAddress	read-only	The router ID of the switch.
INT ospfIfInfoState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.6	INTEGER	read-only	The state of the interface: Down(0), Loopback(1), Waiting(2), P to P(3), DR(4), BackuDR(5), DR Other(6).
I32 ospfIfInfoTotalNeighbours	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.17	Integer32	read-only	The total number of neighbours for this OSPF interface.
INT ospfIfInfoTransitDelay	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.16	INTEGER	read-only	The transit delay for this OSPF interface.
I32 ospfIfInfoWait	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.14	Integer32	read-only	The OSPF Wait interval for this OSPF interface.
IP ospfIfNbrBackupDesignatedRtr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.5.1.6	IpAddress	read-only	The IP Address of the backup designated Router for this OSPF Neighbor.
IP ospfIfNbrDesignatedRtr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.5.1.5	IpAddress	read-only	The IP Address of the Designated Router for this OSPF Neighbor.
ospfIfNbrEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.5.1		not-accessible	Information about a OSPF interface, neighbor pair.
I32 ospfIfNbrIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.5.1.1	Integer32	read-only	The OSPF Interface number for which this Interface/Nbr table is related.
IP ospfIfNbrIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.5.1.2	IpAddress	read-only	The OSPF Neighbor ID .
IP ospfIfNbrIpAddress	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.5.1.7	IpAddress	read-only	The IP Address of the OSPF Neighbor.
I32 ospfIfNbrPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.5.1.3	Integer32	read-only	The priority of the OSPF neighbor.
INT ospfIfNbrState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.5.1.4	INTEGER	read-only	The state of the OSPF neighbor.
ospfIfNbrTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.5		not-accessible	The table of OSPF Interface Neighbor information.
ospfInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4
ospfInterface	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3
C32 ospfIntfBackup	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3.1.7	Counter32	read-only	The total number of Backup Designated Routers on the attatched network for this OSPF interface.
ospfIntfChangeStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3		not-accessible	The table of OSPF Interface change Statistics.
ospfIntfChangeStatsEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3.1		not-accessible	OSPF interface Change statistics.
I32 ospfIntfCountForRouter	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.9	Integer32	read-only	The number of interfaces for this router.
C32 ospfIntfDown	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3.1.3	Counter32	read-only	The total number of times the interface was down.
C32 ospfIntfErrAreaMismatch	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4.1.8	Counter32	read-only	The total number of packets received with a wrong area.
C32 ospfIntfErrAuthFailure	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4.1.2	Counter32	read-only	The total number of packets received with a wrong password in this area.
C32 ospfIntfErrDeadMismatch	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4.1.5	Counter32	read-only	The total number of packets received with a different dead interval in this area.
C32 ospfIntfErrHelloMismatch	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4.1.4	Counter32	read-only	The total number of packets received with a different hello interval in this area.
I32 ospfIntfErrIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4.1.1	Integer32	read-only	The index of the OSPF Intf for which these statistics apply.
C32 ospfIntfErrNetmaskMismatch	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4.1.3	Counter32	read-only	The total number of packets received with a wrong netmask in this area.
C32 ospfIntfErrOptionsMismatch	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4.1.6	Counter32	read-only	The total number of packets received with a different options in this area.
ospfIntfErrorStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4		not-accessible	The table of OSPF Interface Error Statistics.
ospfIntfErrorStatsEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4.1		not-accessible	Error Statistics for an OSPF area.
C32 ospfIntfErrUnknownNbr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4.1.7	Counter32	read-only	The total number of packets received from an unknown neighbor in this area.
C32 ospfIntfHello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3.1.2	Counter32	read-only	The total number of Hello packets sent by this interface.
I32 ospfIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3.1.1	Integer32	read-only	The index of the OSPF Interface for which these statistics apply.
ospfIntfInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1		not-accessible	Information about a OSPF interface.
ospfIntfInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3		not-accessible	The table of OSPF Interface information.
C32 ospfIntfLoop	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3.1.4	Counter32	read-only	The total number of times the interface was no longer connected to the attatched network.
C32 ospfIntfNbrAdjointOk	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.4	Counter32	read-only	The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF interface.
C32 ospfIntfNbrBadRequests	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.7	Counter32	read-only	The total number of Link State Requests which have been received for a link state advertisement not contained in the database for this interface.
C32 ospfIntfNbrBadSequence	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.8	Counter32	read-only	The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this interface.
C32 ospfIntfNbrChange	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3.1.8	Counter32	read-only	The total number of changes in the set of bidirectional neighbours associated with the interface for this OSPF interface.
ospfIntfNbrChangeStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2		not-accessible	The table of OSPF Interface Neighbour change Statistics.
ospfIntfNbrChangeStatsEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1		not-accessible	OSPF interface Neighbour Change statistics.
C32 ospfIntfNbrDown	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.12	Counter32	read-only	The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) for this interface.
C32 ospfIntfNbrExchangeDone	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.6	Counter32	read-only	The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF interface.
C32 ospfIntfNbrhello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.2	Counter32	read-only	The total number of Hello packets received from neighbours in this OSPF interface.
I32 ospfIntfNbrIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.1	Integer32	read-only	The index of the OSPF Interface for which these statistics apply.
C32 ospfIntfNbrLoadingDone	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.9	Counter32	read-only	The total number of link state updates received for all out-of-date portions of the database for this OSPF interface.
C32 ospfIntfNbrN1way	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.10	Counter32	read-only	The total number of Hello packets received from neighbours, in which this router is not mentioned for this OSPF interface.
C32 ospfIntfNbrN2way	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.13	Counter32	read-only	The total number of Hello packets received from neighbours, in which this router is mentioned for this OSPF interface.
C32 ospfIntfNbrNegotiationDone	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.5	Counter32	read-only	The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF interface.
C32 ospfIntfNbrRstAd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.11	Counter32	read-only	The sum total number of times the Neighbour adjacency has been reset on this interface.
C32 ospfIntfNbrStart	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.3	Counter32	read-only	The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF interface.
C32 ospfIntfRxDatabase	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.6	Counter32	read-only	The total number of Database Description packets received for this OSPF interface.
C32 ospfIntfRxHello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.4	Counter32	read-only	The total number of Hello packets received for this OSPF interface.
C32 ospfIntfRxlsAcks	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.10	Counter32	read-only	The total number of Link State Acknowledgement packets received for this OSPF interface.
C32 ospfIntfRxlsReqs	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.8	Counter32	read-only	The total number of Link State Request packets received for this OSPF interface.
C32 ospfIntfRxlsUpdates	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.12	Counter32	read-only	The total number of Link State Update packets received for this OSPF interface.
C32 ospfIntfRxPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.2	Counter32	read-only	The total number of OSPF packets received for this OSPF interface.
I32 ospfIntfRxTxIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.1	Integer32	read-only	The OSPF interface for which these statistics apply.
ospfIntfRxTxStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1		not-accessible	The table of OSPF Interface Rx/Tx packet Statistics.
ospfIntfRxTxStatsEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1		not-accessible	OSPF interface Rx/Tx packet statistics.
I32 ospfIntfTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.5	Integer32	read-only	The maximum number of rows in the OSPF Interface table.
C32 ospfIntfTxDatabase	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.7	Counter32	read-only	The total number of Database Description packets transmitted for this OSPF interface.
C32 ospfIntfTxHello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.5	Counter32	read-only	The total number of Hello packets transmitted for this OSPF interface.
C32 ospfIntfTxlsAcks	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.11	Counter32	read-only	The total number of Link State Acknowledgement packets transmitted for this OSPF interface.
C32 ospfIntfTxlsReqs	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.9	Counter32	read-only	The total number of Link State Request packets transmitted for this OSPF interface.
C32 ospfIntfTxlsUpdates	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.13	Counter32	read-only	The total number of Link State Update packets transmitted for this OSPF interface.
C32 ospfIntfTxPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.3	Counter32	read-only	The total number of OSPF packets transmitted for this OSPF interface.
C32 ospfIntfUnloop	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3.1.5	Counter32	read-only	The total number of times the interface, connected back to the attatched network.
C32 ospfIntfWaitTimer	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3.1.6	Counter32	read-only	The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF interface.
OCT ospfLsdbInfoAdvertisement	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1.9	OCTET STRING	read-only	The entire Link State Advertisement, including its header.
I32 ospfLsdbInfoAge	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1.7	Integer32	read-only	This field is the age of the link state adver- tisement in seconds.
IP ospfLsdbInfoAreaId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1.2	IpAddress	read-only	The 32 bit identifier of the Area from which the LSA was received.
I32 ospfLsdbInfoChecksum	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1.8	Integer32	read-only	This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
ospfLsdbInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1		not-accessible	A single Link State Advertisement.
I32 ospfLsdbInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1.1	Integer32	read-only	The 32 bit index in the table.
IP ospfLsdbInfoLsid	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1.4	IpAddress	read-only	The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
IP ospfLsdbInfoRouterId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1.5	IpAddress	read-only	The 32 bit number that uniquely identifies the originating router in the Autonomous System.
OCT ospfLsdbInfoSequence	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1.6	OCTET STRING	read-only	The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement - displayed here in hexazecimal.
ospfLsdbInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8		not-accessible	The OSPF Process's Link State Database.
INT ospfLsdbInfoType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1.3	INTEGER	read-only	The type of the link state advertisement. Each link state type has a separate advertise- ment format.
I32 ospfLsTypesSupported	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.5	Integer32	read-only	The Link State Types that are supported.
I32 ospfMdkeyTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.11	Integer32	read-only	The maximum number of rows in the OSPF Mdkey table.
I32 ospfNbrInExchState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.16	Integer32	read-only	The number of neighbours in the exchange state.
I32 ospfNbrInFullState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.17	Integer32	read-only	The number of neighbours in the Full state of exchange.
I32 ospfNbrInInitState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.15	Integer32	read-only	The number of neighbours in the initial state of exchange.
INT ospfNewCfgAreaAuthType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3.1.4	INTEGER	read-write	Type of authentication being used. none(1) - no authentication password(2) - use password. md5(3) - use MD5 authentication.
INT ospfNewCfgAreaDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3.1.8	INTEGER	read-write	Delete the area no(0), yes(1)
ospfNewCfgAreaEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3.1		not-accessible	Information about a OSPF area.
IP ospfNewCfgAreaId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3.1.2	IpAddress	read-create	The IP Address of the OSPF area.
I32 ospfNewCfgAreaIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3.1.1	Integer32	read-only	The OSPF area number for which the OSPF area table is related.
INT ospfNewCfgAreaMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3.1.6	INTEGER	read-write	Metric (1-65535)
INT ospfNewCfgAreaSpfInterval	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3.1.3	INTEGER	read-write	The SPF interval for the OSPF area.
INT ospfNewCfgAreaStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3.1.7	INTEGER	read-write	Status disabled(0) enabled(1)
ospfNewCfgAreaTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3		not-accessible	The table of OSPF Area configuration in the new_config.
INT ospfNewCfgAreaType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3.1.5	INTEGER	read-write	Type of Area. transit(0) stub(1) nssa(2)
INT ospfNewCfgDefaultRouteMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.2	INTEGER	read-write	Specify the metric to be assigned.
INT ospfNewCfgDefaultRouteMetricType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.4	INTEGER	read-write	Specify the AS External metric type to be assigned.
I32 ospfNewCfgFixedAddOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.4.7	Integer32	read-write	The route map to be add into out-rmap list. When read, 0 is returned.
INT ospfNewCfgFixedMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.4.2	INTEGER	read-write	The export metric for fixed routes. A value of 0 indicates none
INT ospfNewCfgFixedMetricType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.4.4	INTEGER	read-write	The AS External metric type for fixed routes.
OCT ospfNewCfgFixedOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.4.6	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ospfNewCfgFixedRemoveOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.4.8	Integer32	read-write	The route map to be removed from out-rmap list. When read, 0 is returned.
I32 ospfNewCfgHostAreaIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.13.1.3	Integer32	read-create	The OSPF area index.
INT ospfNewCfgHostCost	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.13.1.4	INTEGER	read-create	The cost of the OSPF host.
INT ospfNewCfgHostDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.13.1.6	INTEGER	read-write	Delete the OSPF host: no(0), yes(1)
ospfNewCfgHostEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.13.1		not-accessible	Information about a OSPF host.
I32 ospfNewCfgHostIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.13.1.1	Integer32	read-only	The OSPF host number for which the OSPF host table is related.
IP ospfNewCfgHostIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.13.1.2	IpAddress	read-create	The IP Address of the OSPF host.
INT ospfNewCfgHostState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.13.1.5	INTEGER	read-create	Enable or disable an OSPF Host
ospfNewCfgHostTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.13		not-accessible	The table of OSPF Host configuration.
INT ospfNewCfgIntfArea	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.3	INTEGER	read-create	The index of the area that the interface belongs (0..2)
STR ospfNewCfgIntfAuthKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.11	DisplayString	read-create	Authentication Key
INT ospfNewCfgIntfCost	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.5	INTEGER	read-create	Interface cost(1..65535)
INT ospfNewCfgIntfDead	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.8	INTEGER	read-create	Dead interval(1..65535)
INT ospfNewCfgIntfDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.13	INTEGER	read-write	Delete the interface other(0), delete(1)
ospfNewCfgIntfEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1		not-accessible	Information about an OSPF Interface.
INT ospfNewCfgIntfHello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.7	INTEGER	read-create	Hello interval(1..65535)
IP ospfNewCfgIntfId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.2	IpAddress	read-only	The IP Address of the OSPF interface.
I32 ospfNewCfgIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.1	Integer32	read-only	The OSPF Interface number for which the OSPF Interface table is related.
INT ospfNewCfgIntfMdkey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.4	INTEGER	read-create	The MD5 key for the OSPF interface 0 (none) no MD5 authentication.
INT ospfNewCfgIntfPrio	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.6	INTEGER	read-create	Interface router priority(0..255)
INT ospfNewCfgIntfRetra	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.10	INTEGER	read-create	Retransmit interval(1..3600)
INT ospfNewCfgIntfStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.12	INTEGER	read-create	Status of the interface disabled(0), enabled(1)
ospfNewCfgIntfTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8		not-accessible	The table of OSPF Interface configuration in the new_config.
INT ospfNewCfgIntfTrans	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.9	INTEGER	read-create	Transit delay(1..3600)
I32 ospfNewCfgLSDB	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.13	Integer32	read-write	Set the LSDB limit for external LSA.
INT ospfNewCfgMdkeyDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.6.1.3	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ospfNewCfgMdkeyEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.6.1		not-accessible	Information about an OSPF MD keys table.
I32 ospfNewCfgMdkeyIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.6.1.1	Integer32	read-only	The OSPF MD5 Key number for which the OSPF MdKey table is related.
STR ospfNewCfgMdkeyKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.6.1.2	DisplayString	read-create	The character string representing the MD5 Key.
ospfNewCfgMdkeyTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.6		not-accessible	The table of OSPF MD5 keys in the new_config.
IP ospfNewCfgRangeAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.15.1.2	IpAddress	read-create	The IP Address of the range.
I32 ospfNewCfgRangeAreaIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.15.1.4	Integer32	read-create	The area index.
INT ospfNewCfgRangeDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.15.1.7	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ospfNewCfgRangeEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.15.1		not-accessible	Information about an OSPF summary range.
INT ospfNewCfgRangeHideState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.15.1.5	INTEGER	read-create	The state of the hide range.
I32 ospfNewCfgRangeIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.15.1.1	Integer32	read-only	The range number for which the OSPF summary range table is related.
IP ospfNewCfgRangeMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.15.1.3	IpAddress	read-create	The mask of the range.
INT ospfNewCfgRangeState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.15.1.6	INTEGER	read-create	The state of the range.
ospfNewCfgRangeTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.15		not-accessible	The table of OSPF summary range in the new configuration.
I32 ospfNewCfgRipAddOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.5.7	Integer32	read-write	The route map to be add into out-rmap list. When read, 0 is returned.
INT ospfNewCfgRipMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.5.2	INTEGER	read-write	The export metric for RIP routes. A value of 0 indicates none
INT ospfNewCfgRipMetricType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.5.4	INTEGER	read-write	The AS External metric type for RIP routes.
OCT ospfNewCfgRipOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.5.6	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ospfNewCfgRipRemoveOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.5.8	Integer32	read-write	The route map to be removed from out-rmap list. When read, 0 is returned.
INT ospfNewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.11	INTEGER	read-write	Globally turn OSPF on or off.
I32 ospfNewCfgStaticAddOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.1.7	Integer32	read-write	The route map to be add into out-rmap list. When read, 0 is returned.
INT ospfNewCfgStaticMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.1.2	INTEGER	read-write	The metric to be assigned to static routes. A value of 0 indicates none.
INT ospfNewCfgStaticMetricType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.1.4	INTEGER	read-write	The AS External metric type for static routes.
OCT ospfNewCfgStaticOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.1.6	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ospfNewCfgStaticRemoveOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.1.8	Integer32	read-write	The route map to be removed from out-rmap list. When read, 0 is returned.
INT ospfNewCfgVirtIntfAreaId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.2	INTEGER	read-create	The index of the OSPF area to which this virtual interface belongs.
STR ospfNewCfgVirtIntfAuthKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.9	DisplayString	read-create	Authentication Key SIZE(0..8)
INT ospfNewCfgVirtIntfDead	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.6	INTEGER	read-create	Dead interval(1..65535)
INT ospfNewCfgVirtIntfDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.11	INTEGER	read-write	Delete other(0), delete(1)
ospfNewCfgVirtIntfEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1		not-accessible	Information about an OSPF virtual Interface.
INT ospfNewCfgVirtIntfHello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.5	INTEGER	read-create	Hello interval(1..65535)
I32 ospfNewCfgVirtIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.1	Integer32	read-only	The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related.
INT ospfNewCfgVirtIntfMdkey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.4	INTEGER	read-create	The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
IP ospfNewCfgVirtIntfNbr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.3	IpAddress	read-create	The IP Address of the OSPF neighbor for this virtual interface.
INT ospfNewCfgVirtIntfRetra	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.8	INTEGER	read-create	Retransmit interval(1..3600)
INT ospfNewCfgVirtIntfStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.10	INTEGER	read-create	Status disabled(0), enabled(1)
ospfNewCfgVirtIntfTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10		not-accessible	The table of OSPF Virtual Interface configuration in the new_config.
INT ospfNewCfgVirtIntfTrans	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.7	INTEGER	read-create	Transit dela(1..3600)y
I32 ospfNewLsaReceived	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.11	Integer32	read-only	The number of new LSAs reveived.
I32 ospfNumberOfInterfacesUp	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.5	Integer32	read-only	The number of interfaces UP in area.
I32 ospfNumberOfLsdbEntries	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.8	Integer32	read-only	The number of Link State Database entries for this OSPF area.
C32 ospfProcessUptime	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.4	Counter32	read-only	The time since ospf has been started.
I32 ospfRangeTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.7	Integer32	read-only	The maximum number of rows in the OSPF Range table.
ospfRedistributeFixed	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.4
ospfRedistributeRip	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.5
ospfRedistributeStatic	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.1
ospfRouteRedistribution	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4
IP ospfRouterID	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.2	IpAddress	read-only	The router ID of the switch.
IP ospfRoutesInfoDestination	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.7.1.2	IpAddress	read-only	Destination.
ospfRoutesInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.7.1		not-accessible	OSPF routes information.
I32 ospfRoutesInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.7.1.1	Integer32	read-only	The OSPF route table entry index for which this table is related.
IP ospfRoutesInfoMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.7.1.3	IpAddress	read-only	Mask.
ospfRoutesInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.7		not-accessible	The table of OSPF routes information.
STR ospfRoutesInfoType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.7.1.5	DisplayString	read-only	Route type. Codes: IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 * - best
IP ospfRoutesInfoVia	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.7.1.4	IpAddress	read-only	Next hop.
I32 ospfStartTime	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.3	Integer32	read-only	The time when ospf has been started.
ospfStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5
INT ospfSumRangesInfoAction	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.6.1.5	INTEGER	read-only	Action propagate(0), hide(1)
INT ospfSumRangesInfoArea	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.6.1.2	INTEGER	read-only	Area.
ospfSumRangesInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.6.1		not-accessible	Summary ranges information.
I32 ospfSumRangesInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.6.1.1	Integer32	read-only	The OSPF range index for which this table is related.
INT ospfSumRangesInfoListType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.6.1.6	INTEGER	read-only	Summary address list Non-NSSA(0), NSSA(1)
IP ospfSumRangesInfoMask	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.6.1.4	IpAddress	read-only	Mask.
IP ospfSumRangesInfoNetwork	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.6.1.3	IpAddress	read-only	Network.
ospfSumRangesInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.6		not-accessible	The table of OSPF summary ranges information.
ospfTimersKickOffStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.4
C32 ospfTmrsKckOffAseExport	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.4.7	Counter32	read-only	The total number of times the ASE Export timer has been fired.
C32 ospfTmrsKckOffDbage	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.4.5	Counter32	read-only	The total number of times the Dbage has been fired.
C32 ospfTmrsKckOffHello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.4.1	Counter32	read-only	The sum total number of times the Hello timer has been fired (which triggers the send of a Hello packet) across all OPSF areas and interfaces.
C32 ospfTmrsKckOffLsaAck	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.4.4	Counter32	read-only	The sum total number of times the Lsa Ack timer has been fired across all ospf areas and interfaces.
C32 ospfTmrsKckOffLsaLock	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.4.3	Counter32	read-only	The sum total number of times the Lsa Lock timer has been fired across all OSPF areas and interfaces.
C32 ospfTmrsKckOffRetransmit	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.4.2	Counter32	read-only	The sum total number of times the Retransmit timer has been fired across all OPSF areas and interfaces.
C32 ospfTmrsKckOffSummary	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.4.6	Counter32	read-only	The total number of times the Summary timer has been fired.
I32 ospfTotalAreas	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.18	Integer32	read-only	The Total number of areas.
I32 ospfTotalLsaOriginated	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.12	Integer32	read-only	The number of LSAs originated.
I32 ospfTotalNeighbours	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.14	Integer32	read-only	The total number of OSPF neighbours.
I32 ospfTotalNssaAreas	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.20	Integer32	read-only	The Total number of NSSA areas.
I32 ospfTotalNumberOfInterfaces	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.4	Integer32	read-only	The total number of interfaces for this OSPF area.
I32 ospfTotalNumberOfLsdbEntries	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.13	Integer32	read-only	Total number of entries in the Link State Database.
I32 ospfTotalStubAreas	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.21	Integer32	read-only	The Total number of STUB areas.
I32 ospfTotalTransitAreas	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.19	Integer32	read-only	The Total number of Transit areas.
INT ospfVersion	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.1	INTEGER	read-only	OSPF version.
INT ospfVirtIntfInfoArea	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.3	INTEGER	read-only	The index of the OSPF area to which this virtual interface belongs.
IP ospfVirtIntfInfoAreaId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.16	IpAddress	read-only	Thea AreaId of the virtual interface.
STR ospfVirtIntfInfoAuth	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.12	DisplayString	read-only	Authentication.
INT ospfVirtIntfInfoCost	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.6	INTEGER	read-only	The cost of the virtual interface.
INT ospfVirtIntfInfoDead	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.9	INTEGER	read-only	Dead interval.
ospfVirtIntfInfoEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1		not-accessible	Information about an OSPF virtual interface.
INT ospfVirtIntfInfoEvents	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.13	INTEGER	read-only	Events.
INT ospfVirtIntfInfoHello	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.8	INTEGER	read-only	Hello interval.
I32 ospfVirtIntfInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.1	Integer32	read-only	The OSPF Virtual Interface number for which this table is related.
IP ospfVirtIntfInfoIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.2	IpAddress	read-only	The IP Address of this virtual interface.
IP ospfVirtIntfInfoNbr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.14	IpAddress	read-only	The IP Address of the OSPF neighbor for this virtual interface.
INT ospfVirtIntfInfoNbrState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.15	INTEGER	read-only	State down(0),attempt(1),init(2),2 way(3), exstart(4),exchange(5),loading(6),full(7)
INT ospfVirtIntfInfoRetra	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.11	INTEGER	read-only	Retransmit interval.
IP ospfVirtIntfInfoRouterId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.4	IpAddress	read-only	The Router ID.
INT ospfVirtIntfInfoState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.5	INTEGER	read-only	State disabled(0), enabled(1)
ospfVirtIntfInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4		not-accessible	The table of OSPF virtual interfaces information.
INT ospfVirtIntfInfoTrans	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.7	INTEGER	read-only	The transit delay for the virtual interface.
INT ospfVirtIntfInfoWait	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.10	INTEGER	read-only	Wait interval.
I32 ospfVirtIntfTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.8	Integer32	read-only	The maximum number of rows in the OSPF Virtual Interface table.
I32 ospfVlinkCountForRouter	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.10	Integer32	read-only	The number of virtual links for this router.
pktStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1
C32 pktStatsAllocFails	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1.3	Counter32	read-only	Total number of packet allocation failures from the packet buffer pool by the TCP/IP protocol stack.
C32 pktStatsAllocsEx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1.1	Counter32	read-only	Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.
C32 pktStatsFrees	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1.2	Counter32	read-only	Total number of times the packet buffers are freed(released) to the packet buffer pool by the TCP/IP protocol stack.
G32 pktStatsJumbos	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1.5	Gauge32	read-only	Total number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
C32 pktStatsJumbosHiWatermark	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1.8	Counter32	read-only	The highest number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
G32 pktStatsMediums	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1.4	Gauge32	read-only	Total number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
C32 pktStatsMediumsHiWatermark	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1.7	Counter32	read-only	The highest number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
G32 pktStatsSmalls	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1.6	Gauge32	read-only	Total number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack.
C32 pktStatsSmallsHiWatermark	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1.9	Counter32	read-only	The highest number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack.
INT pmCurCfgPmirrDirection	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.3.1.3	INTEGER	read-only	The type of traffic to be monitored with respect to the mirrored port.
I32 pmCurCfgPmirrMirrPortIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.3.1.2	Integer32	read-only	The mirrored port number
I32 pmCurCfgPmirrMoniPortIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.3.1.1	Integer32	read-only	The monitoring port number.
INT pmCurCfgPortMirrState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.1	INTEGER	read-only	The state of port-based port mirroring.
pmCurCfgPortMonitorEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.3.1		not-accessible	A row in the monitoring port table.
pmCurCfgPortMonitorTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.3		not-accessible	The table of monitoring ports.
INT pmNewCfgPmirrDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4.1.4	INTEGER	read-create	Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
INT pmNewCfgPmirrDirection	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4.1.3	INTEGER	read-create	The type of traffic to be monitored with respect to the mirrored port.
I32 pmNewCfgPmirrMirrPortIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4.1.2	Integer32	read-only	The mirrored port number
I32 pmNewCfgPmirrMoniPortIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4.1.1	Integer32	read-only	The monitoring port number.
INT pmNewCfgPmonDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4.1.10	INTEGER	read-create	Setting the value to delete(2) will delete the monitor port. When read, other(1) is returned.
INT pmNewCfgPortMirrState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.2	INTEGER	read-write	The state of port-based port mirroring.
pmNewCfgPortMonitorEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4.1		not-accessible	A row in the monitoring port table.
pmNewCfgPortMonitorTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4		not-accessible	The table of monitoring ports.
portInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2
INT portInfoFlowCtrl	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.4	INTEGER	read-only	The current operational flow control of the port.
I32 portInfoIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.1	Integer32	read-only	The port index.
INT portInfoLink	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.5	INTEGER	read-only	The current operational link status of the port.
INT portInfoMode	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.3	INTEGER	read-only	The current operational mode of the port.
STR portInfoPhyIfDescr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.6	DisplayString	read-only	A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
TIK portInfoPhyIfLastChange	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.11	TimeTicks	read-only	The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
I32 portInfoPhyIfMtu	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.8	Integer32	read-only	The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
INT portInfoPhyIfOperStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.10	INTEGER	read-only	The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
PHY portInfoPhyIfPhysAddress	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.9	PhysAddress	read-only	The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
INT portInfoPhyIfType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.7	INTEGER	read-only	The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
INT portInfoSpeed	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.2	INTEGER	read-only	The current operational speed of the port.
portInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1		not-accessible	The table of port information.
portInfoTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1		not-accessible	A row in the port information table.
I32 portOperDot1xIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.3.1.1	Integer32	read-only	The port index.
INT portOperDot1xReauth	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.3.1.3	INTEGER	read-write	Initiate reauthentication on port.
INT portOperDot1xReset	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.3.1.2	INTEGER	read-write	Reinitialize 802.1x access control on port.
portOperDot1xTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.3		not-accessible	The table of port operations.
portOperDot1xTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.3.1		not-accessible	A row in the port 802.1x operation table.
I32 portOperIdx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.1.1.1	Integer32	read-only	The port index.
INT portOperRmon	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.1.1.3	INTEGER	read-write	Enable/Disable RMON for port.
INT portOperState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.1.1.2	INTEGER	read-write	Enable/Disable port.
portStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3
INT portStatsClear	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.16	INTEGER	read-write	Setting this value to clear(1) clears the stats for this port.
I32 portStatsIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.1	Integer32	read-only	The port index.
C32 portStatsPhyIfInBroadcastPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.14	Counter32	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.
C32 portStatsPhyIfInDiscards	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.5	Counter32	read-only	The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
C32 portStatsPhyIfInErrors	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.6	Counter32	read-only	The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
C32 portStatsPhyIfInMulticastPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.17	Counter32	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer.
C32 portStatsPhyIfInNUcastPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.4	Counter32	read-only	The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
C32 portStatsPhyIfInOctets	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.2	Counter32	read-only	The total number of octets received on the interface, including framing characters.
C32 portStatsPhyIfInUcastPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.3	Counter32	read-only	The number of subnetwork-unicast packets delivered to a higher-layer protocol.
C32 portStatsPhyIfInUnknownProtos	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.7	Counter32	read-only	The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
C32 portStatsPhyIfOutBroadcastPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.15	Counter32	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.
C32 portStatsPhyIfOutDiscards	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.11	Counter32	read-only	The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
C32 portStatsPhyIfOutErrors	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.12	Counter32	read-only	The number of outbound packets that could not be transmitted because of errors.
C32 portStatsPhyIfOutMulticastPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.18	Counter32	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent.
C32 portStatsPhyIfOutNUcastPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.10	Counter32	read-only	The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
C32 portStatsPhyIfOutOctets	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.8	Counter32	read-only	The total number of octets transmitted out of the interface, including framing characters.
G32 portStatsPhyIfOutQLen	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.13	Gauge32	read-only	The length of the output packet queue (in packets).
C32 portStatsPhyIfOutUcastPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.9	Counter32	read-only	The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
portStatsTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1		not-accessible	The table of port statistics.
portStatsTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1		not-accessible	A row in the port stats table.
INT pvstCompatibilityCurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.8.9	INTEGER	read-only	Enable or disable PVST+ compatibility
INT pvstCompatibilityNewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.8.10	INTEGER	read-write	Enable or disable PVST+ compatibility
qos	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8
qos8021p	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1
qosConfigs	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1
INT qosCurCfgCosIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.5.1.1	INTEGER	read-only	CoSq Number
INT qosCurCfgCosNum	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.7	INTEGER	read-only	Number of CoSq.
INT qosCurCfgCosWeight	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.5.1.2	INTEGER	read-only	Weight of CoSq
qosCurCfgCosWeightEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.5.1		not-accessible	Information about a particular CoSq and Weight configuration.
qosCurCfgCosWeightTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.5		not-accessible	The table of CoSq and Weight configuration.
I32 qosCurCfgPortIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.1.1.1	Integer32	read-only	Switch Port Number
INT qosCurCfgPortPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.1.1.2	INTEGER	read-only	Switch Port Priority Should be between 0 and 7
qosCurCfgPortPriorityEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.1.1		not-accessible	Information about a particular QOS Port Priority configuration.
qosCurCfgPortPriorityTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.1		not-accessible	The table of QOS Port Priority configuration.
qosCurCfgPriorityCoSEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.3.1		not-accessible	Information about a particular Frame Priority and COSq configuration.
INT qosCurCfgPriorityCoSq	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.3.1.2	INTEGER	read-only	CoSq for a Frame Priority Should be between 0 and 7
qosCurCfgPriorityCoSTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.3		not-accessible	The table of Frame Priority and COSq configuration.
INT qosCurCfgPriorityIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.3.1.1	INTEGER	read-only	Frame priority Number
INT qosDefaultCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.9	INTEGER	read-write	Load default configuration.
qosInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.3
INT qosNewCfgCosIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.6.1.1	INTEGER	read-only	CoSq Number
INT qosNewCfgCosNum	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.8	INTEGER	read-write	Number of CoSq.
INT qosNewCfgCosWeight	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.6.1.2	INTEGER	read-write	Weight of CoSq
qosNewCfgCosWeightEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.6.1		not-accessible	Information about a particular CoSq and Weight configuration.
qosNewCfgCosWeightTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.6		not-accessible	The table of CoSq and Weight configuration.
I32 qosNewCfgPortIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.2.1.1	Integer32	read-only	Switch Port Number
INT qosNewCfgPortPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.2.1.2	INTEGER	read-write	Switch Port Priority Should be between 0 and 7
qosNewCfgPortPriorityEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.2.1		not-accessible	Information about a particular QOS Port Priority configuration.
qosNewCfgPortPriorityTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.2		not-accessible	The table of QOS Port Priority configuration.
qosNewCfgPriorityCoSEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.4.1		not-accessible	Information about a particular Frame Priority and COSq configuration.
INT qosNewCfgPriorityCoSq	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.4.1.2	INTEGER	read-write	CoSq for a Frame Priority Should be between 0 and 7
qosNewCfgPriorityCoSTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.4		not-accessible	The table of Frame Priority and COSq configuration.
INT qosNewCfgPriorityIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.4.1.1	INTEGER	read-only	Frame priority Number
qosOper	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.4
qosStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.2
STR radCurCfgAuthenSecondString	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.17	DisplayString	read-only	The second RADIUS authentication string.
STR radCurCfgAuthenString	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.13	DisplayString	read-only	The RADIUS authentication string.
INT radCurCfgBackdoor	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.15	INTEGER	read-only	Enable or disable RADIUS backdoor for telnet/ssh/http/https.
INT radCurCfgPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.5	INTEGER	read-only	Specify the RADIUS port number.
IP radCurCfgPrimaryIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.1	IpAddress	read-only	The IP address of the Primary RADIUS server.
INT radCurCfgRetries	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.9	INTEGER	read-only	Number of retries to the RADIUS server.
INT radCurCfgSecBd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.19	INTEGER	read-only	Enable or disable RADIUS secure backdoor for telnet.
IP radCurCfgSecondaryIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.3	IpAddress	read-only	The IP address of the Secondary RADIUS server.
INT radCurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.11	INTEGER	read-only	Enable or disable RADIUS authentication.
INT radCurCfgTimeout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.7	INTEGER	read-only	The maximum number of seconds before resending authentication to RADIUS server.
STR radNewCfgAuthenSecondString	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.18	DisplayString	read-write	The second RADIUS authentication string.
STR radNewCfgAuthenString	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.14	DisplayString	read-write	The RADIUS authentication string.
INT radNewCfgBackdoor	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.16	INTEGER	read-write	Enable or disable RADIUS backdoor for telnet/ssh/http/https.
INT radNewCfgPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.6	INTEGER	read-write	Speicfy the RADIUS port number.
IP radNewCfgPrimaryIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.2	IpAddress	read-write	The IP address of the Primary RADIUS server.
INT radNewCfgRetries	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.10	INTEGER	read-write	Number of retries to the RADIUS server.
INT radNewCfgSecBd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.20	INTEGER	read-write	Enable or disable RADIUS secure backdoor for telnet.
IP radNewCfgSecondaryIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.4	IpAddress	read-write	The IP address of the Secondary RADIUS server.
INT radNewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.12	INTEGER	read-write	Enable or disable RADIUS authentication.
INT radNewCfgTimeout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.8	INTEGER	read-write	The maximum number of seconds before resending authentication to RADIUS server.
rip2Cfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18
INT rip2CurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.3.1	INTEGER	read-only	RIP global state.
INT rip2CurCfgUpdatePeriod	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.3.3	INTEGER	read-only	Update Period in seconds.
rip2GeneralInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.1
rip2Info	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7
rip2InfoIntfTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2		not-accessible	The information table of RIP.
INT rip2NewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.3.2	INTEGER	read-write	Globally turn RIP on or off.
INT rip2NewCfgUpdatePeriod	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.3.4	INTEGER	read-write	Update Period in seconds.
rip2Stats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13
INT ripClearStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.4	INTEGER	read-write	Setting this to clear(1) results in clearing the RIP statistics.
INT ripCurCfgEospfMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.6.1	INTEGER	read-only	The export metric for RIP routes. A value of 0 indicates none
OCT ripCurCfgEospfOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.6.5	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
INT ripCurCfgFixedMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.4.1	INTEGER	read-only	The export metric for fixed routes. A value of 0 indicates none
OCT ripCurCfgFixedOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.4.5	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
INT ripCurCfgIntfAuth	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.11	INTEGER	read-only	Enable or disable RIP update authorization with a simple plain text password.
INT ripCurCfgIntfDefault	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.5	INTEGER	read-only	Specifies what RIP does with default routes.
ripCurCfgIntfEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1		not-accessible	Information about RIP on IP interface.
INT ripCurCfgIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.1	INTEGER	read-only	The interface number for which the RIP information is related.
STR ripCurCfgIntfKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.12	DisplayString	read-only	RIP update authentication password.
INT ripCurCfgIntfListen	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.4	INTEGER	read-only	Enable or disable listening to route updates.
INT ripCurCfgIntfMcastUpdate	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.7	INTEGER	read-only	Enable or disable multicast updates.
INT ripCurCfgIntfMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.10	INTEGER	read-only	RIP route metric for this interface.
INT ripCurCfgIntfPoisonReverse	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.8	INTEGER	read-only	RIP poison reverse.
INT ripCurCfgIntfSplitHorizon	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.13	INTEGER	read-only	RIP split horizon.
INT ripCurCfgIntfState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.9	INTEGER	read-only	Enable or disable RIP protocol.
INT ripCurCfgIntfSupply	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.3	INTEGER	read-only	Enable or disable supplying route updates.
ripCurCfgIntfTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1		not-accessible	The table of RIP on IP interface configuration in the current_config.
INT ripCurCfgIntfTrigUpdate	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.6	INTEGER	read-only	Enable or disable tirggered updates.
INT ripCurCfgIntfVersion	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.2	INTEGER	read-only	RIP version.
INT ripCurCfgOspfMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.5.1	INTEGER	read-only	The export metric for RIP routes. A value of 0 indicates none
OCT ripCurCfgOspfOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.5.5	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
INT ripCurCfgStaticMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.1.1	INTEGER	read-only	The metric to be assigned to static routes. A value of 0 indicates none.
OCT ripCurCfgStaticOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.1.5	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
ripGeneral	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.3
IP ripInfoIntfAddress	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.3	IpAddress	read-only	The interface address.
INT ripInfoIntfAuth	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.11	INTEGER	read-only	The type of Authentication used on this interface.
INT ripInfoIntfDefault	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.13	INTEGER	read-only	Specifies what RIP does with default routes.
ripInfoIntfEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1		not-accessible	Information about RIP on IP interface.
I32 ripInfoIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.1	Integer32	read-only	The interface number for which the RIP information is related.
STR ripInfoIntfKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.12	DisplayString	read-only	RIP update authentication password.
INT ripInfoIntfListen	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.5	INTEGER	read-only	The status of listening to route updates.
INT ripInfoIntfMcastUpdate	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.7	INTEGER	read-only	The status of multicast updates.
INT ripInfoIntfMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.10	INTEGER	read-only	RIP route metric for this interface.
INT ripInfoIntfPoisonReverse	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.8	INTEGER	read-only	The status of RIP poison reverse.
INT ripInfoIntfState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.4	INTEGER	read-only	The status of RIP protocol.
INT ripInfoIntfSupply	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.9	INTEGER	read-only	The status of supplying route updates.
INT ripInfoIntfTrigUpdate	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.6	INTEGER	read-only	The status of triggered updates.
INT ripInfoIntfVersion	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.2	INTEGER	read-only	RIP version.
INT ripInfoState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.1.1	INTEGER	read-only	RIP global state.
INT ripInfoUpdatePeriod	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.1.2	INTEGER	read-only	Update Period in seconds.
I32 ripNewCfgEospfAddOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.6.7	Integer32	read-write	The route map to be add into out-rmap list. When read, 0 is returned.
INT ripNewCfgEospfMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.6.2	INTEGER	read-write	The export metric for RIP routes. A value of 0 indicates none
OCT ripNewCfgEospfOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.6.6	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ripNewCfgEospfRemoveOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.6.8	Integer32	read-write	The route map to be removed from out-rmap list. When read, 0 is returned.
I32 ripNewCfgFixedAddOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.4.7	Integer32	read-write	The route map to be add into out-rmap list. When read, 0 is returned.
INT ripNewCfgFixedMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.4.2	INTEGER	read-write	The export metric for fixed routes. A value of 0 indicates none
OCT ripNewCfgFixedOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.4.6	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ripNewCfgFixedRemoveOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.4.8	Integer32	read-write	The route map to be removed from out-rmap list. When read, 0 is returned.
INT ripNewCfgIntfAuth	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.11	INTEGER	read-write	Enable or disable RIP update authorization with a simple plain text password.
INT ripNewCfgIntfDefault	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.5	INTEGER	read-create	Specifies what RIP does with default routes. The default routes action could be set to listen/supply/both/none.
ripNewCfgIntfEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1		not-accessible	Information about RIP on IP interface.
INT ripNewCfgIntfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.1	INTEGER	read-only	The interface number for which the RIP information is related.
STR ripNewCfgIntfKey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.12	DisplayString	read-create	RIP update authentication password.
INT ripNewCfgIntfListen	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.4	INTEGER	read-write	Enable or disable listening to route updates.
INT ripNewCfgIntfMcastUpdate	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.7	INTEGER	read-write	Enable or disable multicast updates.
INT ripNewCfgIntfMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.10	INTEGER	read-write	RIP route metric for this interface.
INT ripNewCfgIntfPoisonReverse	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.8	INTEGER	read-write	RIP poison reverse.
INT ripNewCfgIntfSplitHorizon	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.13	INTEGER	read-write	RIP split horizon.
INT ripNewCfgIntfState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.9	INTEGER	read-create	Enable or disable RIP protocol.
INT ripNewCfgIntfSupply	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.3	INTEGER	read-write	Enable or disable supplying route updates.
ripNewCfgIntfTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2		not-accessible	The table of RIP on IP interface configuration in the new_config.
INT ripNewCfgIntfTrigUpdate	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.6	INTEGER	read-write	Enable or disable tirggered updates.
INT ripNewCfgIntfVersion	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.2	INTEGER	read-write	RIP version.
I32 ripNewCfgOspfAddOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.5.7	Integer32	read-write	The route map to be add into out-rmap list. When read, 0 is returned.
INT ripNewCfgOspfMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.5.2	INTEGER	read-write	The export metric for RIP routes. A value of 0 indicates none
OCT ripNewCfgOspfOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.5.6	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ripNewCfgOspfRemoveOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.5.8	Integer32	read-write	The route map to be removed from out-rmap list. When read, 0 is returned.
I32 ripNewCfgStaticAddOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.1.7	Integer32	read-write	The route map to be add into out-rmap list. When read, 0 is returned.
INT ripNewCfgStaticMetric	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.1.2	INTEGER	read-write	The metric to be assigned to static routes. A value of 0 indicates none.
OCT ripNewCfgStaticOutRmapList	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.1.6	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ripNewCfgStaticRemoveOutRmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.1.8	Integer32	read-write	The route map to be removed from out-rmap list. When read, 0 is returned.
ripRedistributeEospf	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.6
ripRedistributeFixed	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.4
ripRedistributeOspf	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.5
ripRedistributeStatic	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.1
ripRouteRedistribution	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4
C32 ripStatInBadSizePkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.8	Counter32	read-only	The total number of bad size RIP packets recieved.
C32 ripStatInBadSourceIP	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.12	Counter32	read-only	The total number of RIP bad source IP recieved.
C32 ripStatInBadSourcePort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.11	Counter32	read-only	The total number of RIP bad source port recieved.
C32 ripStatInBadVersion	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.9	Counter32	read-only	The total number of RIP bad versions recieved.
C32 ripStatInBadZeros	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.10	Counter32	read-only	The total number of RIP bad zeros recieved.
C32 ripStatInPackets	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.1	Counter32	read-only	The total number of RIP packets recieved.
C32 ripStatInRequestPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.3	Counter32	read-only	The total number of RIP requests recieved.
C32 ripStatInResponsePkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.4	Counter32	read-only	The total number of RIP response recieved.
C32 ripStatInSelfRcvPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.13	Counter32	read-only	The total number of RIP packets from self received.
C32 ripStatOutPackets	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.2	Counter32	read-only	The total number of RIP packets transmitted.
C32 ripStatOutRequestPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.5	Counter32	read-only	The total number of RIP requests transmitted.
C32 ripStatOutResponsePkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.6	Counter32	read-only	The total number of RIP responses transmitted.
C32 ripStatRouteTimeout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.7	Counter32	read-only	The total number of RIP route timeouts.
INT routeClearStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.11	INTEGER	read-write	Setting this to clear(1) results in clearing the Route statistics.
G32 routeStatEntries	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.3.1	Gauge32	read-only	The current number of IP routes.
G32 routeStatHighWater	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.3.2	Gauge32	read-only	The highest number of IP routes.
G32 routeStatMaxEntries	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.3.3	Gauge32	read-only	The maximum number of IP routes.
routeStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.3
INT routeTableClear	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.2	INTEGER	read-write	Setting this value to clear(2) clears the route table.
C32 rxIgmpGenQueries	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.4	Counter32	read-only	The total number of IGMP General Query packets received on this VLAN.
C32 rxIgmpGroupSourceSpecificQueries	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.11	Counter32	read-only	The total number of IGMP Group Source Specific (GSSQ) Queries received on this VLAN.
C32 rxIgmpGrpSpecificQueries	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.5	Counter32	read-only	The total number of IGMP Group Specific Query packets received on this VLAN.
C32 rxIgmpInvalidPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.3	Counter32	read-only	The total number of invalid IGMP packets received on this VLAN.
C32 rxIgmpLeaves	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.6	Counter32	read-only	The total number of IGMP Leave packets received on this VLAN.
C32 rxIgmpReports	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.7	Counter32	read-only	The total number of IGMP Report packets received on this VLAN.
C32 rxIgmpV3CurrentStateRecords	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.12	Counter32	read-only	The total number of IGMP Current State Records (CSRs) received on this VLAN.
C32 rxIgmpV3FilterChangeRecords	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.14	Counter32	read-only	The total number of IGMP Filter Mode Change Records (FMCRs) received on this VLAN.
C32 rxIgmpV3SourceListChangeRecords	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.13	Counter32	read-only	The total number of IGMP Source List Change Records (SLCRs) received on this VLAN.
C32 rxIgmpValidPkts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.2	Counter32	read-only	The total number of valid IGMP packets received on this VLAN.
sfpInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9
INT sfpInfoApproved	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.7	INTEGER	read-only	External Port SFP/XFP Approval.
STR sfpInfoDevice	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.3	DisplayString	read-only	External Port SFP/XFP Device.
I32 sfpInfoIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.1	Integer32	read-only	The external port SFX index.
STR sfpInfoPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.2	DisplayString	read-only	External Port SFP/XFP alias.
INT sfpInfoRXSignal	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.5	INTEGER	read-only	External Port SFP/XFP RX-Signal.
sfpInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1		not-accessible	The table of external port SFP information.
sfpInfoTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1		not-accessible	A row in the external port SFP information table.
INT sfpInfoTXEnable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.4	INTEGER	read-only	External Port SFP/XFP TX-Enable.
INT sfpInfoTXFault	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.6	INTEGER	read-only	External Port SFP/XFP TX-Fault.
INT snmpClearStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.7.1	INTEGER	read-write	Setting this to clear(2) results in clearing the SNMP statistics.
INT sshCurCfgIntrval	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.1	INTEGER	read-only	Interval for generating the RSA server key.
STR sshCurCfgScpAdm	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.3	DisplayString	read-only	SCP-only admin password.
INT sshCurCfgScpApplySave	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.9	INTEGER	read-only	SCP apply and save.
INT sshCurCfgSSHPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.7	INTEGER	read-only	SSH server port number.
INT sshCurCfgStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.11	INTEGER	read-only	SSH server status.
INT sshNewCfgHKeyGen	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.5	INTEGER	read-write	This is an action object to generate the RSA host key. other(2) is returned always when read. The following values are writable: generate(1).. Generate the RSA host key.
INT sshNewCfgIntrval	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.2	INTEGER	read-write	Set Interval for generating the RSA server key.
STR sshNewCfgScpAdm	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.4	DisplayString	read-write	Set SCP-only admin password.
INT sshNewCfgScpApplySave	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.10	INTEGER	read-write	Enable/Disable the SCP apply and save.
INT sshNewCfgSKeyGen	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.6	INTEGER	read-write	This is an action object to generate the RSA server key. other(2) is returned always when read. The following values are writable: generate(1).. Generate the RSA server key.
INT sshNewCfgSSHPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.8	INTEGER	read-write	Set SSH server port number.
INT sshNewCfgStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.12	INTEGER	read-write	Turn SSH server ON/OFF.
stgCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3
INT stgCurCfgBrgForwardDelay	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.7	INTEGER	read-only	The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
INT stgCurCfgBrgHelloTime	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.6	INTEGER	read-only	The value in seconds that all bridges use for HelloTime when this bridge is acting as the root.
INT stgCurCfgBrgMaxAge	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.8	INTEGER	read-only	The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
I32 stgCurCfgIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.1	Integer32	read-only	The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
INT stgCurCfgPortEdge	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.7	INTEGER	read-only	The state of port edge.
INT stgCurCfgPortFastFwd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.8	INTEGER	read-only	The state of port fast forwarding.
I32 stgCurCfgPortIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.2	Integer32	read-only	The port identifier of a particular Spanning Tree Group.
INT stgCurCfgPortLink	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.6	INTEGER	read-only	The type of the port link.
INT stgCurCfgPortPathCost	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.5	INTEGER	read-only	The contribution of this port to the path cost of paths towards the spanning tree root which include this port.
INT stgCurCfgPortPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.4	INTEGER	read-only	The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
INT stgCurCfgPortState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.3	INTEGER	read-only	Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
stgCurCfgPortTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3		not-accessible	The table of Spanning Tree Group port configuration in the current_config.
stgCurCfgPortTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1		not-accessible	Information about port configuration of a particular Spanning Tree Group.
INT stgCurCfgPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.5	INTEGER	read-only	The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
INT stgCurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.2	INTEGER	read-only	Turn on of off Spanning Tree operation of a particular Spanning Tree Group.
I32 stgCurCfgStgIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.1	Integer32	read-only	The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
stgCurCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1		not-accessible	The table of Spanning Tree Group configuration.
stgCurCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1		not-accessible	Information about a particular Spanning Tree Group configuration.
OCT stgCurCfgVlanBmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.10	OCTET STRING	read-only	The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4095. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ vlan 9 \|\| \|\| \|\| \|\|___ vlan 8 \|\| \|____ vlan 7 \|\| . . . \|\|_________ vlan 2 \|__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree
OCT stgInfoVlanBmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.3	OCTET STRING	read-only	The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ vlan 9 \|\| \|\| \|\| \|\|___ vlan 8 \|\| \|____ vlan 7 \|\| . . . \|\|_________ vlan 2 \|__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree
I32 stgNewCfgAddVlan	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.4	Integer32	read-create	The vlan to be added to the specified Spanning Tree Group. A '0' value is returned when read.
INT stgNewCfgBrgForwardDelay	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.10	INTEGER	read-create	The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
INT stgNewCfgBrgHelloTime	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.9	INTEGER	read-create	The value in seconds that all bridges use for HelloTime when this bridge is acting as the root.
INT stgNewCfgBrgMaxAge	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.11	INTEGER	read-create	The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
INT stgNewCfgDefaultCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.3	INTEGER	read-create	Setting the value to default-config(1) will set the default configuration as recommended by IEEE 802.1D for a particular Spanning Tree Group. default-config (1) is always returned When read, but it does not mean anything.
I32 stgNewCfgIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.1	Integer32	read-only	The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
INT stgNewCfgPortEdge	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.7	INTEGER	read-create	The state of port edge.
INT stgNewCfgPortFastFwd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.8	INTEGER	read-create	The state of port fast forwarding.
I32 stgNewCfgPortIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.2	Integer32	read-only	The port identifier of a particular Spanning Tree Group.
INT stgNewCfgPortLink	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.6	INTEGER	read-create	The type of the port link.
INT stgNewCfgPortPathCost	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.5	INTEGER	read-create	The contribution of this port to the path cost of paths towards the spanning tree root which include this port.
INT stgNewCfgPortPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.4	INTEGER	read-create	The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
INT stgNewCfgPortState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.3	INTEGER	read-create	Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
stgNewCfgPortTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4		not-accessible	The table of Spanning Tree Group port configuration in the new_config.
stgNewCfgPortTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1		not-accessible	Information about port configuration of a particular Spanning Tree Group.
INT stgNewCfgPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.8	INTEGER	read-create	The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
I32 stgNewCfgRemoveVlan	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.5	Integer32	read-create	The vlan to be removed from the specified Spanning Tree Group. A '0' value is returned when read.
INT stgNewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.2	INTEGER	read-create	Turn on of off Spanning Tree operation of a particular Spanning Tree Group.
I32 stgNewCfgStgIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.1	Integer32	read-only	The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
stgNewCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2		not-accessible	The table of Spanning Tree Groups configuration in the new_config.
stgNewCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1		not-accessible	Information about a particular Spanning Tree Group configuration.
OCT stgNewCfgVlanBmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.13	OCTET STRING	read-only	The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4095. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ vlan 9 \|\| \|\| \|\| \|\|___ vlan 8 \|\| \|____ vlan 7 \|\| . . . \|\|_________ vlan 2 \|__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree
I32 stgStatsPortIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1.2	Integer32	read-only	The port identifier of a particular Spanning Tree Group.
C32 stgStatsPortRcvCfgBpdus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1.3	Counter32	read-only	Number of Configuration BPDU's received on this port.
C32 stgStatsPortRcvTcnBpdus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1.4	Counter32	read-only	Number of TCN BPDU's received on this port.
stgStatsPortTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1		not-accessible	The table of Spanning Tree Group port statistics.
stgStatsPortTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1		not-accessible	Statistics about port of a particular Spanning Tree Group.
C32 stgStatsPortXmtCfgBpdus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1.5	Counter32	read-only	Number of Configuration BPDU's trasmitted from the port.
C32 stgStatsPortXmtTcnBpdus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1.6	Counter32	read-only	Number of TCN BPDU's trasmitted from the port.
I32 stgStatsStpIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1.1	Integer32	read-only	The identifier of a particular Spanning Tree Group.
stpInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3
INT stpInfoAgingTime	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.17	INTEGER	read-only	The timeout period in seconds for aging out dynamically learned forwarding information.
INT stpInfoBrgForwardDelay	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.15	INTEGER	read-only	The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
INT stpInfoBrgHelloTime	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.14	INTEGER	read-only	The value in seconds that all bridges use for HelloTime when this bridge is acting as the root.
INT stpInfoBrgMaxAge	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.16	INTEGER	read-only	The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
INT stpInfoBrgPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.13	INTEGER	read-only	The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
BRI stpInfoDesignatedRoot	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.6	BridgeId	read-only	The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
I32 stpInfoForwardDelay	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.11	Integer32	read-only	This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database.
I32 stpInfoHelloTime	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.10	Integer32	read-only	The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
I32 stpInfoHoldTime	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.12	Integer32	read-only	This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
I32 stpInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.1	Integer32	read-only	The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
I32 stpInfoMaxAge	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.9	Integer32	read-only	The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
BRI stpInfoPortDesignatedBridge	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1.6	BridgeId	read-only	The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
I32 stpInfoPortDesignatedCost	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1.5	Integer32	read-only	The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
OCT stpInfoPortDesignatedPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1.7	OCTET STRING	read-only	The Port Identifier of the port on the Designated Bridge for this port's segment.
BRI stpInfoPortDesignatedRoot	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1.4	BridgeId	read-only	The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
C32 stpInfoPortForwardTransitions	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1.8	Counter32	read-only	The number of times this port has transitioned from the Learning state to the Forwarding state.
I32 stpInfoPortIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1.2	Integer32	read-only	The port identifier of a particular Spanning Tree Group.
I32 stpInfoPortPathCost	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1.9	Integer32	read-only	The path cost of the port.
INT stpInfoPortState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1.3	INTEGER	read-only	The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled, this object will have a value of disabled(1).
I32 stpInfoPortStpIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1.1	Integer32	read-only	The identifier of a particular Spanning Tree Group.
stpInfoPortTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2		not-accessible	The table of Spanning Tree Group port information.
stpInfoPortTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1		not-accessible	Information about port configuration for a particular Spanning Tree Group.
I32 stpInfoRootCost	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.7	Integer32	read-only	The cost of the path to the root as seen from this bridge.
I32 stpInfoRootPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.8	Integer32	read-only	The port number of the port which offers the lowest cost path from this bridge to the root bridge.
INT stpInfoState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.2	INTEGER	read-only	Turn on of off Spanning Tree operation of a particular Spanning Tree Group.
stpInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1		not-accessible	The table of Spanning Tree Group information.
stpInfoTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1		not-accessible	Information about a particular Spanning Tree Group.
TIK stpInfoTimeSinceTopChange	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.4	TimeTicks	read-only	The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
C32 stpInfoTopChanges	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.5	Counter32	read-only	The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
stpStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2
STR tacCurCfgAuthenSecondString	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.17	DisplayString	read-only	The second TACACS+ authentication string.
STR tacCurCfgAuthenString	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.13	DisplayString	read-only	The TACACS+ authentication string.
INT tacCurCfgBackdoor	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.15	INTEGER	read-only	Enable or disable TACACS+ backdoor for telnet/ssh/http/https.
INT tacCurCfgCmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.25	INTEGER	read-only	Enable/Disable Tacacs+ new prividlege level maping.
INT tacCurCfgCmdAuthor	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.19	INTEGER	read-only	Enable or disable TACACS+ command authorization.
INT tacCurCfgCmdLogging	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.21	INTEGER	read-only	Enable or disable TACACS+ command logging.
INT tacCurCfgPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.5	INTEGER	read-only	Specify the TACACS+ port number.
IP tacCurCfgPrimaryIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.1	IpAddress	read-only	The IP address of the Primary TACACS+ server.
INT tacCurCfgRetries	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.9	INTEGER	read-only	Number of retries to the TACACS+ server.
INT tacCurCfgSecBd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.23	INTEGER	read-only	Enable or disable TACACS+ secure backdoor for telnet.
IP tacCurCfgSecondaryIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.3	IpAddress	read-only	The IP address of the Secondary TACSACS server.
INT tacCurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.11	INTEGER	read-only	Enable or disable TACACS+ authentication.
INT tacCurCfgTimeout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.7	INTEGER	read-only	The maximum number of seconds before resending authentication to TACACS+ server.
STR tacNewCfgAuthenSecondString	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.18	DisplayString	read-write	The second TACACS+ authentication string.
STR tacNewCfgAuthenString	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.14	DisplayString	read-write	The TACACS+ authentication string.
INT tacNewCfgBackdoor	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.16	INTEGER	read-write	Enable or disable TACACS+ backdoor for telnet/ssh/http/https.
INT tacNewCfgCmap	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.26	INTEGER	read-write	Enable/Disable Tacacs+ new prividlege level maping.
INT tacNewCfgCmdAuthor	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.20	INTEGER	read-write	Enable or disable TACACS+ command authorization.
INT tacNewCfgCmdLogging	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.22	INTEGER	read-write	Enable or disable TACACS+ command logging.
INT tacNewCfgPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.6	INTEGER	read-write	Specify the TACACS+ port number.
IP tacNewCfgPrimaryIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.2	IpAddress	read-write	The IP address of the Primary TACACS+ server.
INT tacNewCfgRetries	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.10	INTEGER	read-write	Number of retries to the TACACS+ server.
INT tacNewCfgSecBd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.24	INTEGER	read-write	Enable or disable TACACS+ secure backdoor for telnet.
IP tacNewCfgSecondaryIpAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.4	IpAddress	read-write	The IP address of the Secondary TACACS+ server.
INT tacNewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.12	INTEGER	read-write	Enable or disable TACACS+ authentication.
INT tacNewCfgTimeout	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.8	INTEGER	read-write	The maximum number of seconds before resending authentication to TACACS+ server.
INT tcpClearStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.6	INTEGER	read-write	Setting this to clear(1) results in clearing the TCP statistics.
thash	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7
thashL2	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7.1
trunkgroup	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2
I32 trunkGroupCurCfgIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.2.1.1	Integer32	read-only	The identifier of the trunk group.
OCT trunkGroupCurCfgPorts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.2.1.2	OCTET STRING	read-only	The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group
INT trunkGroupCurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.2.1.3	INTEGER	read-only	Enable or disable a trunk group.
trunkGroupCurCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.2		not-accessible	The table of trunk group configuration.
trunkGroupCurCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.2.1		not-accessible	A row in the trunk group configuration table.
trunkGroupInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9
I32 trunkGroupInfoIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.1.1.1	Integer32	read-only	The identifier of the trunk group.
I32 trunkGroupInfoPortPortId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.2.1.2	Integer32	read-only	The Port identifier.
OCT trunkGroupInfoPorts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.1.1.3	OCTET STRING	read-only	The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group
INT trunkGroupInfoPortStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.2.1.3	INTEGER	read-only	The Port Status.
trunkGroupInfoPortTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.2		not-accessible	The table of Trunk Group Info.
trunkGroupInfoPortTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.2.1		not-accessible	A row in the Trunk Info table.
I32 trunkGroupInfoPortTrunkId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.2.1.1	Integer32	read-only	The Trunk identifier.
INT trunkGroupInfoProtocol	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.1.1.4	INTEGER	read-only	Trunk group protocol Static - static trunk group Lacp - dynamic trunk group
INT trunkGroupInfoState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.1.1.2	INTEGER	read-only	Trunk group state.
OCT trunkGroupInfoStgs	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.1.1.5	OCTET STRING	read-only	The stg list the trunk group is in. The stgs are presented in bitmap format.
trunkGroupInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.1		not-accessible	The table of trunk group information.
trunkGroupInfoTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.1.1		not-accessible	A row in trunk group information table.
I32 trunkGroupNewCfgAddPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1.3	Integer32	read-create	The port to be added in the trunk group. When read, 0 is returned.
INT trunkGroupNewCfgDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1.6	INTEGER	read-create	Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
I32 trunkGroupNewCfgIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1.1	Integer32	read-only	The identifier of the trunk group.
OCT trunkGroupNewCfgPorts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1.2	OCTET STRING	read-only	The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group
I32 trunkGroupNewCfgRemovePort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1.4	Integer32	read-create	The port to be deleted from the trunk group. when read, 0 is returned.
INT trunkGroupNewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1.5	INTEGER	read-create	Enable or disable a trunk group.
trunkGroupNewCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3		not-accessible	The table of trunk group configuration.
trunkGroupNewCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1		not-accessible	A row in the trunk group configuration table.
I32 trunkGroupTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.1	Integer32	read-only	The maximum number of entries in trunk group table.
C32 txIgmpGrpSpecificQueries	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.8	Counter32	read-only	The total number of IGMP Group Specific Query packets transmitted on this VLAN.
C32 txIgmpLeaves	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.10	Counter32	read-only	The total number of IGMP Leave packets transmitted on this VLAN.
C32 txIgmpReports	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.9	Counter32	read-only	The total number of IGMP Report packets transmitted on this VLAN.
INT udpClearStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.7	INTEGER	read-write	Setting this to clear(1) results in clearing the UDP statistics.
ufd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9
INT ufdClearStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.4.4	INTEGER	read-write	Setting this value to clear(2) clears the UFD stats.
INT ufdCurCfgGlobalState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.28	INTEGER	read-only	Current global Failover settings.
OCT ufdCurCfgLtDPorts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.9	OCTET STRING	read-only	The LtD port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to LtD 0 - The represented port does not belong to LtD
OCT ufdCurCfgLtDTrunks	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.11	OCTET STRING	read-only	The LtD trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ trunk 8 \|\| \|\| \|\| \|\|___ trunk 7 \|\| \|____ trunk 6 \|\| . . . \|\|_________ trunk 1 \|__________ reserved where x : 1 - The represented trunk belongs to LtD 0 - The represented trunk does not belong to LtD
INT ufdCurCfgLtMAdminkey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.7	INTEGER	read-only	The LtM admin key.
OCT ufdCurCfgLtMPorts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.3	OCTET STRING	read-only	The LtM port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to LtM 0 - The represented port does not belong to LtM
OCT ufdCurCfgLtMTrunks	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.5	OCTET STRING	read-only	The LtM trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ trunk 8 \|\| \|\| \|\| \|\|___ trunk 7 \|\| \|____ trunk 6 \|\| . . . \|\|_________ trunk 1 \|__________ reserved where x : 1 - The represented trunk belongs to LtM 0 - The represented trunk does not belong to LtM
INT ufdCurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.1	INTEGER	read-only	Enable or disable UFD state
ufdGeneralCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1
ufdInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8
INT ufdInfoLtDAdminkey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.10.1.1	INTEGER	read-only	The LtD admin key.
I32 ufdInfoLtDAdminkeyMaxEnt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.9	Integer32	read-only	The maximum number of rows in the LtD admin key configuration table.
ufdInfoLtDAdminkeyTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.10		not-accessible	The table of LtD admin key configuration.
ufdInfoLtDAdminkeyTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.10.1		not-accessible	A row in the LtD admin key table.
OCT ufdInfoLtDPorts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.7	OCTET STRING	read-only	The LtD port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to LtD 0 - The represented port does not belong to LtD.
INT ufdInfoLtDStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.6	INTEGER	read-only	LtD status.
INT ufdInfoLtDTrunks	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.8	INTEGER	read-only	The LtD trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ trunk 8 \|\| \|\| \|\| \|\|___ trunk 7 \|\| \|____ trunk 6 \|\| . . . \|\|_________ trunk 1 \|__________ reserved where x : 1 - The represented trunk belongs to LtD 0 - The represented trunk does not belong to LtD.
INT ufdInfoLtMAdminkey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.5	INTEGER	read-only	The LtM admin key.
OCT ufdInfoLtMPorts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.3	OCTET STRING	read-only	The LtM port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to LtM 0 - The represented port does not belong to LtM.
INT ufdInfoLtMStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.2	INTEGER	read-only	LtM Status.
OCT ufdInfoLtMTrunks	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.4	OCTET STRING	read-only	The LtM trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ trunk 8 \|\| \|\| \|\| \|\|___ trunk 7 \|\| \|____ trunk 6 \|\| . . . \|\|_________ trunk 1 \|__________ reserved where x : 1 - The represented trunk belongs to LtM 0 - The represented trunk does not belong to LtM.
INT ufdInfoState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.1	INTEGER	read-only	Uplink Failure Detection State.
INT ufdLtDAdminkeyCurCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.14.1.1	INTEGER	read-only	The LtD admin key.
ufdLtDAdminkeyCurCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.14		not-accessible	The table of LtD admin key configuration.
ufdLtDAdminkeyCurCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.14.1		not-accessible	A row in the LtD admin key table.
I32 ufdLtDAdminkeyMaxEnt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.13	Integer32	read-only	The maximum number of rows in the LtD admin key configuration table.
INT ufdLtDAdminkeyNewCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.15.1.1	INTEGER	read-only	The LtD admin key.
ufdLtDAdminkeyNewCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.15		not-accessible	The table of LtD admin key configuration.
ufdLtDAdminkeyNewCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.15.1		not-accessible	A row in the LtD admin key table.
INT ufdNewCfgAddLtDAdminkey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.26	INTEGER	read-write	The admin key to be added to LtD. A '0' value is returned when read.
INT ufdNewCfgAddLtDPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.22	INTEGER	read-write	The port to be added to LtD. A '0' value is returned when read.
INT ufdNewCfgAddLtDTrunk	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.24	INTEGER	read-write	The trunk to be added to LtM. A '0' value is returned when read.
INT ufdNewCfgAddLtMAdminkey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.20	INTEGER	read-write	The admin key to be added to LtM. A '0' value is returned when read.
INT ufdNewCfgAddLtMPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.16	INTEGER	read-write	The port to be added to LtM. A '0' value is returned when read.
INT ufdNewCfgAddLtMTrunk	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.18	INTEGER	read-write	The trunk to be added to LtM. A '0' value is returned when read.
INT ufdNewCfgGlobalState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.29	INTEGER	read-write	New global Failover settings.
OCT ufdNewCfgLtDPorts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.10	OCTET STRING	read-only	The LtD port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to LtD 0 - The represented port does not belong to LtD
OCT ufdNewCfgLtDTrunks	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.12	OCTET STRING	read-write	The LtD trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ trunk 8 \|\| \|\| \|\| \|\|___ trunk 7 \|\| \|____ trunk 6 \|\| . . . \|\|_________ trunk 1 \|__________ reserved where x : 1 - The represented trunk belongs to LtD 0 - The represented trunk does not belong to LtD
INT ufdNewCfgLtMAdminkey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.8	INTEGER	read-only	The LtM admin key.
OCT ufdNewCfgLtMPorts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.4	OCTET STRING	read-only	The LtM port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to LtM 0 - The represented port does not belong to LtM
OCT ufdNewCfgLtMTrunks	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.6	OCTET STRING	read-write	The LtM trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ trunk 8 \|\| \|\| \|\| \|\|___ trunk 7 \|\| \|____ trunk 6 \|\| . . . \|\|_________ trunk 1 \|__________ reserved where x : 1 - The represented trunk belongs to LtM 0 - The represented trunk does not belong to LtM
INT ufdNewCfgRemoveLtDAdminkey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.27	INTEGER	read-write	The admin key to be removed from LtD. A '0' value is returned when read.
INT ufdNewCfgRemoveLtDPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.23	INTEGER	read-write	The port to be removed from LtM. A '0' value is returned when read.
INT ufdNewCfgRemoveLtDTrunk	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.25	INTEGER	read-write	The trunk to be removed from LtD. A '0' value is returned when read.
INT ufdNewCfgRemoveLtMAdminkey	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.21	INTEGER	read-write	The admin key to be removed from LtM. A '0' value is returned when read.
INT ufdNewCfgRemoveLtMPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.17	INTEGER	read-write	The port to be removed from LtM. A '0' value is returned when read.
INT ufdNewCfgRemoveLtMTrunk	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.19	INTEGER	read-write	The trunk to be removed from LtM. A '0' value is returned when read.
INT ufdNewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.2	INTEGER	read-write	Enable or disable UFD state
I32 ufdNoLtDAutoDisabled	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.4.3	Integer32	read-only
I32 ufdNoLtMLinkBlockingState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.4.2	Integer32	read-only
I32 ufdNoLtMLinkFailure	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.4.1	Integer32	read-only
ufdStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.4
I32 unknownRx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.5	Integer32	read-only	Unknown version/TLV type
INT updateCurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.8.3	INTEGER	read-only	UplinkFast station update rate: packets per second
INT updateNewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.8.4	INTEGER	read-write	UplinkFast station update rate: packets per second
INT upfastCurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.8.1	INTEGER	read-only	Enable or disable uplink fast
INT upfastNewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.8.2	INTEGER	read-write	Enable or disable uplink fast
vlan	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1
OCT vlanCurCfgPorts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2.1.3	OCTET STRING	read-only	The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN
INT vlanCurCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2.1.4	INTEGER	read-only	Enable or disable a VLAN
I32 vlanCurCfgStg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2.1.6	Integer32	read-only	The Spanning Tree Group for the VLAN.
vlanCurCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2		not-accessible	The table of VLAN configuration.
vlanCurCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2.1		not-accessible	A row in the VLAN configuration table.
I32 vlanCurCfgVlanId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2.1.1	Integer32	read-only	The VLAN identifier.
STR vlanCurCfgVlanName	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2.1.2	DisplayString	read-only	The VLAN name.
vlanInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.8
INT vlanInfoId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.8.1.1.1	INTEGER	read-only	The VLAN identifier.
STR vlanInfoName	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.8.1.1.2	DisplayString	read-only	The VLAN name.
OCT vlanInfoPorts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.8.1.1.4	OCTET STRING	read-only	The port list information in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN
INT vlanInfoStatus	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.8.1.1.3	INTEGER	read-only	Enable or disable, VLAN state information
vlanInfoTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.8.1		not-accessible	The table of VLAN information.
vlanInfoTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.8.1.1		not-accessible	Information about a particular VLAN.
I32 vlanMaxEnt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.1	Integer32	read-only	The maximum number of rows in the VLAN configuration table.
I32 vlanNewCfgAddPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.5	Integer32	read-create	The port to be added to the specified VLAN. A '0' value is returned when read.
INT vlanNewCfgDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.7	INTEGER	read-create	This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN
OCT vlanNewCfgPorts	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.3	OCTET STRING	read-only	The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ port 8 \|\| \|\| \|\| \|\|___ port 7 \|\| \|____ port 6 \|\| . . . \|\|_________ port 1 \|__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN
I32 vlanNewCfgRemovePort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.6	Integer32	read-create	The port to be removed from the specified VLAN. A '0' value is returned when read.
INT vlanNewCfgState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.4	INTEGER	read-create	Enable or disable a VLAN
I32 vlanNewCfgStg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.9	Integer32	read-create	The Spanning Tree Group for the VLAN.
vlanNewCfgTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3		not-accessible	The table of VLAN configuration.
vlanNewCfgTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1		not-accessible	A row in the VLAN configuration table.
I32 vlanNewCfgVlanId	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.1	Integer32	read-only	The VLAN identifier.
STR vlanNewCfgVlanName	1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.2	DisplayString	read-create	The VLAN name.
vrrpCfg	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6
INT vrrpClearStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.2	INTEGER	read-write	Setting this to clear(2) results in clearing the VRRP statistics.
INT vrrpCurCfgGenState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.1.1	INTEGER	read-only	Enable or disable VRRP operation globally.
INT vrrpCurCfgGenTckIpIntfInc	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.1.5	INTEGER	read-only	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces.
INT vrrpCurCfgGenTckVirtRtrInc	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.1.3	INTEGER	read-only	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers.
INT vrrpCurCfgGenTckVlanPortInc	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.1.7	INTEGER	read-only	The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router.
INT vrrpCurCfgIfAuthType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.6.1.2	INTEGER	read-only	Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpCurCfgIfPasswd for authentication.
I32 vrrpCurCfgIfIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.6.1.1	Integer32	read-only	The VRRP interface index. This is eqivalent to IfIndex.
STR vrrpCurCfgIfPasswd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.6.1.3	DisplayString	read-only	The password for authentication.
vrrpCurCfgIfTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.6		not-accessible	The table of VRRP interface configuration in current_config.
vrrpCurCfgIfTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.6.1		not-accessible	Information about a VRRP interface.
IP vrrpCurCfgVirtRtrAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.3	IpAddress	read-only	The VRRP virtual router IP address.
INT vrrpCurCfgVirtRtrGrpID	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1.2	INTEGER	read-only	The VRRP virtual router identifier.
I32 vrrpCurCfgVirtRtrGrpIfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1.3	Integer32	read-only	The IfIndex that the VRRP virtual router is representing.
I32 vrrpCurCfgVirtRtrGrpIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1.1	Integer32	read-only	The VRRP virtual router table index.
INT vrrpCurCfgVirtRtrGrpInterval	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1.4	INTEGER	read-only	The time interval between VRRP advertisements in seconds.
INT vrrpCurCfgVirtRtrGrpPreempt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1.6	INTEGER	read-only	This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
INT vrrpCurCfgVirtRtrGrpPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1.5	INTEGER	read-only	The priority value to be used by the specified VRRP virtual routers.
INT vrrpCurCfgVirtRtrGrpState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1.7	INTEGER	read-only	Enable or disable the VRRP virtual router.
vrrpCurCfgVirtRtrGrpTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9		not-accessible	The table of VRRP virtual router group in current_config.
vrrpCurCfgVirtRtrGrpTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1		not-accessible	Information about a VRRP failover virtual router.
INT vrrpCurCfgVirtRtrGrpTckIpIntf	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1.10	INTEGER	read-only	Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
INT vrrpCurCfgVirtRtrGrpTckVlanPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1.11	INTEGER	read-only	Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
INT vrrpCurCfgVirtRtrID	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.2	INTEGER	read-only	The VRRP virtual router identifier.
I32 vrrpCurCfgVirtRtrIfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.4	Integer32	read-only	The IfIndex that the VRRP virtual router is representing.
I32 vrrpCurCfgVirtRtrIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.1	Integer32	read-only	The VRRP virtual router table index.
INT vrrpCurCfgVirtRtrInterval	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.5	INTEGER	read-only	The time interval between VRRP advertisements in seconds.
INT vrrpCurCfgVirtRtrPreempt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.7	INTEGER	read-only	This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
INT vrrpCurCfgVirtRtrPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.6	INTEGER	read-only	The priority value to be used by the specified VRRP virtual routers.
INT vrrpCurCfgVirtRtrState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.8	INTEGER	read-only	Enable or disable the VRRP virtual router.
vrrpCurCfgVirtRtrTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3		not-accessible	The table of VRRP virtual routers configuration in current_config.
vrrpCurCfgVirtRtrTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1		not-accessible	Information about a VRRP virtual router.
INT vrrpCurCfgVirtRtrTckIpIntf	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.11	INTEGER	read-only	Enable or disable tracking other router interfaces for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
INT vrrpCurCfgVirtRtrTckVirtRtr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.10	INTEGER	read-only	Enable or disable tracking other virtual routers for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVirtRtrInc.
INT vrrpCurCfgVirtRtrTckVlanPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.12	INTEGER	read-only	Enable or disable tracking port state of VLAN ports for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
vrrpGeneral	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.1
I32 vrrpIfTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.5	Integer32	read-only	The maximum number of entries in VRRP interface table.
vrrpInfo	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3
IP vrrpInfoVirtRtrAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1.1.4	IpAddress	read-only	The VRRP virtual router IP address.
INT vrrpInfoVirtRtrConfig	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1.1.2	INTEGER	read-only	The status of the VRRP virtual router.
INT vrrpInfoVirtRtrID	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1.1.3	INTEGER	read-only	The VRRP virtual router identifier.
I32 vrrpInfoVirtRtrIfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1.1.5	Integer32	read-only	The IfIndex that the VRRP virtual router is representing.
I32 vrrpInfoVirtRtrIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1.1.1	Integer32	read-only	The VRRP virtual router index.
INT vrrpInfoVirtRtrOwnership	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1.1.8	INTEGER	read-only	The VRRP virtual router ownership status.
INT vrrpInfoVirtRtrPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1.1.6	INTEGER	read-only	The priority value to be used by the specified VRRP virtual routers.
INT vrrpInfoVirtRtrState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1.1.7	INTEGER	read-only	The VRRP virtual router state.
vrrpInfoVirtRtrTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1		not-accessible	The table of VRRP virtual router run-time information.
vrrpInfoVirtRtrTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1.1		not-accessible	The run-time information about a VRRP virtual router.
INT vrrpNewCfgGenState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.1.2	INTEGER	read-write	Enable or disable VRRP operation globally.
INT vrrpNewCfgGenTckIpIntfInc	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.1.6	INTEGER	read-write	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces.
INT vrrpNewCfgGenTckVirtRtrInc	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.1.4	INTEGER	read-write	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers.
INT vrrpNewCfgGenTckVlanPortInc	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.1.8	INTEGER	read-write	The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router.
INT vrrpNewCfgIfAuthType	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.7.1.2	INTEGER	read-create	Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpNewCfgIfPasswd for authentication.
INT vrrpNewCfgIfDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.7.1.4	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
I32 vrrpNewCfgIfIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.7.1.1	Integer32	read-only	The VRRP interface index. This is eqivalent to IfIndex.
STR vrrpNewCfgIfPasswd	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.7.1.3	DisplayString	read-create	The password for authentication.
vrrpNewCfgIfTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.7		not-accessible	The table of VRRP interface configuration in current_config.
vrrpNewCfgIfTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.7.1		not-accessible	Information about a VRRP interface.
IP vrrpNewCfgVirtRtrAddr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.3	IpAddress	read-create	The VRRP virtual router IP address.
INT vrrpNewCfgVirtRtrDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.9	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
INT vrrpNewCfgVirtRtrGrpDelete	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.8	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
INT vrrpNewCfgVirtRtrGrpID	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.2	INTEGER	read-create	The VRRP virtual router identifier.
I32 vrrpNewCfgVirtRtrGrpIfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.3	Integer32	read-create	The IfIndex that the VRRP virtual router is representing.
I32 vrrpNewCfgVirtRtrGrpIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.1	Integer32	read-only	The VRRP virtual router table index.
INT vrrpNewCfgVirtRtrGrpInterval	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.4	INTEGER	read-create	The time interval between VRRP advertisements in seconds.
INT vrrpNewCfgVirtRtrGrpPreempt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.6	INTEGER	read-create	This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
INT vrrpNewCfgVirtRtrGrpPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.5	INTEGER	read-create	The priority value to be used by the specified VRRP virtual router.
INT vrrpNewCfgVirtRtrGrpState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.7	INTEGER	read-create	Enable or disable the VRRP virtual router.
vrrpNewCfgVirtRtrGrpTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10		not-accessible	The table of VRRP virtual router group configuration in new_config.
vrrpNewCfgVirtRtrGrpTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1		not-accessible	Information about a VRRP failover virtual router.
INT vrrpNewCfgVirtRtrGrpTckIpIntf	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.11	INTEGER	read-create	Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
INT vrrpNewCfgVirtRtrGrpTckVlanPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.12	INTEGER	read-create	Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
INT vrrpNewCfgVirtRtrID	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.2	INTEGER	read-write	The VRRP virtual router identifier.
I32 vrrpNewCfgVirtRtrIfIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.4	Integer32	read-create	The IfIndex that the VRRP virtual router is representing.
I32 vrrpNewCfgVirtRtrIndx	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.1	Integer32	read-only	The VRRP virtual router table index.
INT vrrpNewCfgVirtRtrInterval	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.5	INTEGER	read-create	The time interval between VRRP advertisements in seconds.
INT vrrpNewCfgVirtRtrPreempt	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.7	INTEGER	read-create	This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
INT vrrpNewCfgVirtRtrPriority	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.6	INTEGER	read-create	The priority value to be used by the specified VRRP virtual router.
INT vrrpNewCfgVirtRtrState	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.8	INTEGER	read-create	Enable or disable the VRRP virtual router.
vrrpNewCfgVirtRtrTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4		not-accessible	The table of VRRP virtual routers configuration in current_config.
vrrpNewCfgVirtRtrTableEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1		not-accessible	Information about a VRRP virtual router.
INT vrrpNewCfgVirtRtrTckIpIntf	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.12	INTEGER	read-create	Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
INT vrrpNewCfgVirtRtrTckVirtRtr	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.11	INTEGER	read-create	Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc.
INT vrrpNewCfgVirtRtrTckVlanPort	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.13	INTEGER	read-create	Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
vrrpOper	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.4.1
INT vrrpOperVirtRtrBackup	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.4.1.1.1.2	INTEGER	read-write	When set to a value of 'backup(2)' it forces the specified master virtual router into backup mode. 'ok(1)' is returned when the object os read.
vrrpOperVirtRtrEntry	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.4.1.1.1		not-accessible	A row in the vrrpOperVirtRtrTable
INT vrrpOperVirtRtrGroupBackup	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.4.1.2	INTEGER	read-write	When set to a value of 'backup(2)' it forces the specified master virtual router group into backup mode. 'ok(1)' is returned when the object os read.
I32 vrrpOperVirtRtrIndex	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.4.1.1.1.1	Integer32	read-only	The index for the VRRP virtual router.
vrrpOperVirtRtrTable	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.4.1.1		not-accessible	An entry in the table of virtual routers.
C32 vrrpStatBadAddress	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4.5	Counter32	read-only	The number of bad VRRP addres adv which are received.
C32 vrrpStatBadData	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4.8	Counter32	read-only	The number of bad VRRP advertisements which are received.
C32 vrrpStatBadInterval	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4.9	Counter32	read-only	The number of bad VRRP iutervals which are received.
C32 vrrpStatBadPassword	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4.6	Counter32	read-only	The number of bad VRRP advertisements which are received.
C32 vrrpStatBadVersion	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4.4	Counter32	read-only	The number of bad VRRP version adv which are received.
C32 vrrpStatBadVrid	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4.7	Counter32	read-only	The number of bad VRRP version ID adv which are received.
C32 vrrpStatInAdvers	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4.1	Counter32	read-only	The number of good VRRP advertisements which are received.
C32 vrrpStatOutAdvers	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4.2	Counter32	read-only	The number of good VRRP advertisements which are transmitted.
C32 vrrpStatOutBadAdvers	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4.3	Counter32	read-only	The number of bad VRRP advertisements which are received.
vrrpStats	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4
I32 vrrpVirtRtrGrpTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.8	Integer32	read-only	The maximum number of entries in VRRP Group table.
I32 vrrpVirtRtrTableMaxSize	1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.2	Integer32	read-only	The maximum number of entries in VRRP virtual router table.

RFC description

Network management MIB for HP BladeSystem Type 5 interconnect switches (GbE2c 1-10G); vendor-private blade switch management.

Start monitoring HP BladeSystem Type 5 embedded blade switch modules with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BLADETYPE5-NETWORK-MIB