All MIBs › ACC-ASPORT
Category: Network Interfaces, Vendor: ACC/Ericsson
Description:
Manages asynchronous serial port configuration on ACC/Ericsson access routers, including baud rate, flow control, modem control, and port mode settings.
Imported Objects
From ACC-MIB
| DisplayString | |
| IfIndex | |
| RowStatus | |
| SmdsAddress | |
| accBRG | OBJECT-IDENTITY |
From ACC-SYSTEM
| accTrapLogSeqNum | OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| OBJECT-TYPE |
What Is ACC-ASPORT?
ACC-ASPORT is an enterprise MIB from ACC (later part of Ericsson) targeting the asynchronous serial port subsystem on ACC access/WAN routers. It exposes configuration-oriented data such as per-port baud rate, flow-control method, modem-control signaling, and operating mode rather than high-volume traffic counters. In a monitoring context it is used mainly to verify device configuration status: confirming a console or dial-backup async port is set to the expected mode and that modem control lines are behaving as configured, which matters when that port is the only path into a router during an outage. It has no strong dependency on other MIBs beyond general SNMPv2 conventions, though it complements standard interface and serial-line MIBs for a complete port picture. It would be deployed on legacy ACC/Ericsson branch-office or WAN access routers that use async ports for management or backup dial-up connectivity. Network engineers evaluating or troubleshooting this functionality can download the ACC-ASPORT file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ACC-ASPORT. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- async port operating mode
- baud rate setting
- flow control method
- modem control signal state
Supported Devices
- ACC/Ericsson WAN access router
Monitoring Examples
No object names were provided for this module, so specifics can't be grounded to real identifiers; based on its description, the MIB would expose a per-port configuration table (baud rate, flow control, modem control, port mode) indexed by port number. An administrator would poll that table's modem-control and mode fields to confirm a dial-backup port is armed and its baud rate matches the attached modem, catching a misconfigured or disabled backup path before it's needed during a WAN outage.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| accAsPort | 1.3.6.1.4.1.5.1.1.10 | |||
| accConsole | 1.3.6.1.4.1.5.1.1.10.2 | |||
| accConsoleParms | 1.3.6.1.4.1.5.1.1.10.2.1 | |||
| INT accConsoleSpeed | 1.3.6.1.4.1.5.1.1.10.2.1.5 | INTEGER | read-write | Baud rate for this port; {1200, 2400, 4800, 7200, 9600 } are permitted. |
| accNaTraps | 1.3.6.1.4.1.5.1.1.10.2.1.6 | |||
| NTF accSwLevlTrap | 1.3.6.1.4.1.5.1.1.10.2.1.6.0.1 | software has changed to requested level. it requires a reset for the changes to take place SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accNaTrapMsg } PCAUSE-DEFAULT: 7 | ||
| NTF accNaInvKeyTrap | 1.3.6.1.4.1.5.1.1.10.2.1.6.0.2 | Software reg key entered by use is not valid. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accNaTrapMsg } PCAUSE-DEFAULT: 7 | ||
| NTF accNaLogBufTrap | 1.3.6.1.4.1.5.1.1.10.2.1.6.0.3 | trap log buffer change requires a reset. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accNaTrapMsg } PCAUSE-DEFAULT: 7 | ||
| STR accNaTrapMsg | 1.3.6.1.4.1.5.1.1.10.2.1.6.1 | DisplayString | read-write | TrapMessage for Na Traps; |
RFC description
Vendor-private MIB for ACC (American Communication Company) ASPort devices; manages asynchronous serial port configuration and monitoring.
Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.