FN100-MIB

All MIBs › FN100-MIB

Category: Network Interfaces, Vendor: Fibronics (Legacy)

Description: Fibronics 100BASE-T Fast Ethernet MIB for managing Fibronics Fast Ethernet hubs, switches, and network adapters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FN100-MIB?

FN100-MIB is Fibronics' vendor-specific MIB for its FN100 line of 100BASE-T Fast Ethernet hubs, switches, and network adapters. It exposes protocol- and trunking-related configuration objects for switch ports, including per-interface bridge protocol settings (BPDU suppression, RIP listening) and link trunking/aggregation state. It supports monitoring hardware/software configuration status of switch ports rather than raw traffic counters: sfprotoBridge, sfprotoSuppressBpdu, and sfprotoRipListen indicate whether spanning-tree BPDUs or RIP routing updates are processed on a port, while sftrunkState reports whether a trunked link aggregation group is currently active. As a legacy vendor-specific MIB it builds on standard ifIndex-style indexing conventions rather than importing other enterprise MIBs directly. It was deployed in mid-1990s Fast Ethernet LAN environments using Fibronics FN100 switching hardware. Engineers can download the FN100-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in FN100-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy Fast Ethernet hub/switch (enterprise OID 3, CMU-registered) — Enterprise OID 3 resolves to Carnegie Mellon University (cmu), not Fibronics (enterprise OID 22, used elsewhere in this corpus) as previously described; the sibling FN10-MIB, sharing the same enterprise OID, was correctly left unattributed to any specific vendor.

Monitoring Examples

Polling sfprotoTable/sfprotoEntry by sfprotoIfIndex lets an operator check sfprotoBridge, sfprotoSuppressBpdu, and sfprotoTrunking settings per port to confirm switch protocol behavior matches the intended network design. The sftrunkTable/sftrunkEntry, indexed by sftrunkIfIndex, reports sftrunkState, revealing whether a configured link aggregation trunk between two FN100 switches is up or down. An unexpected sftrunkState change to down on a port expected to be part of an active trunk would indicate a failed link or misconfigured trunk member.

What Can Be Monitored

per-port bridge/BPDU suppression settings
RIP listening state
port trunking configuration
trunk link aggregation state
spanning tree protocol settings per port

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
TimeTicks
enterprises
mgmt

From RFC1213-MIB

DisplayString
PhysAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
cmu	1.3.6.1.4.1.3
systems	1.3.6.1.4.1.3.1
cmuSNMP	1.3.6.1.4.1.3.1.1
cmuKip	1.3.6.1.4.1.3.1.2
cmuRouter	1.3.6.1.4.1.3.1.3
mibs	1.3.6.1.4.1.3.2
sigma	1.3.6.1.4.1.97
sys	1.3.6.1.4.1.97.1
INT sysID	1.3.6.1.4.1.97.1.1	INTEGER	read-only
TIK sysReset	1.3.6.1.4.1.97.1.2	TimeTicks	read-write
INT sysTrapAck	1.3.6.1.4.1.97.1.3	INTEGER	read-write
TIK sysTrapTime	1.3.6.1.4.1.97.1.4	TimeTicks	read-write
TIK sysTrapRetry	1.3.6.1.4.1.97.1.5	TimeTicks	read-write
INT sysTrapPort	1.3.6.1.4.1.97.1.6	INTEGER	read-write
platform	1.3.6.1.4.1.97.5
es_1fe	1.3.6.1.4.1.97.5.3
sfhw	1.3.6.1.4.1.97.5.3.1
OCT sfhwDiagCode	1.3.6.1.4.1.97.5.3.1.1	OCTET STRING	read-only
STR sfhwManufData	1.3.6.1.4.1.97.5.3.1.2	DisplayString	read-only
INT sfhwPortCount	1.3.6.1.4.1.97.5.3.1.3	INTEGER	read-only
sfhwPortTable	1.3.6.1.4.1.97.5.3.1.4		not-accessible
sfhwPortEntry	1.3.6.1.4.1.97.5.3.1.4.1		not-accessible
INT sfhwPortIndex	1.3.6.1.4.1.97.5.3.1.4.1.1	INTEGER	read-only
INT sfhwPortType	1.3.6.1.4.1.97.5.3.1.4.1.2	INTEGER	read-only
INT sfhwPortSubType	1.3.6.1.4.1.97.5.3.1.4.1.3	INTEGER	read-only
INT sfhwPortDiagPassed	1.3.6.1.4.1.97.5.3.1.4.1.4	INTEGER	read-only
OCT sfhwAddr	1.3.6.1.4.1.97.5.3.1.4.1.5	OCTET STRING	read-only
sfsw	1.3.6.1.4.1.97.5.3.2
INT sfswNumber	1.3.6.1.4.1.97.5.3.2.1	INTEGER	read-only
sfswFilesetTable	1.3.6.1.4.1.97.5.3.2.2		not-accessible
sfswFileset	1.3.6.1.4.1.97.5.3.2.2.1		not-accessible
INT sfswIndex	1.3.6.1.4.1.97.5.3.2.2.1.1	INTEGER	read-only
STR sfswDesc	1.3.6.1.4.1.97.5.3.2.2.1.2	DisplayString	read-only
INT sfswCount	1.3.6.1.4.1.97.5.3.2.2.1.3	INTEGER	read-only
OCT sfswType	1.3.6.1.4.1.97.5.3.2.2.1.4	OCTET STRING	read-only
OCT sfswSizes	1.3.6.1.4.1.97.5.3.2.2.1.5	OCTET STRING	read-only
OCT sfswStarts	1.3.6.1.4.1.97.5.3.2.2.1.6	OCTET STRING	read-only
OCT sfswBases	1.3.6.1.4.1.97.5.3.2.2.1.7	OCTET STRING	read-only
INT sfswFlashBank	1.3.6.1.4.1.97.5.3.2.2.1.8	INTEGER	read-only
sfadmin	1.3.6.1.4.1.97.5.3.3
OCT sfadminFatalErr	1.3.6.1.4.1.97.5.3.3.1	OCTET STRING	read-only
OCT sfadminAnyPass	1.3.6.1.4.1.97.5.3.3.2	OCTET STRING	read-write
OCT sfadminGetPass	1.3.6.1.4.1.97.5.3.3.3	OCTET STRING	read-write
IP sfadminNMSIPAddr	1.3.6.1.4.1.97.5.3.3.4	IpAddress	read-write
INT sfadminAlarmDynamic	1.3.6.1.4.1.97.5.3.3.5	INTEGER	read-write
INT sfadminAlarmAddressChange	1.3.6.1.4.1.97.5.3.3.6	INTEGER	read-write
INT sfadminStorageFailure	1.3.6.1.4.1.97.5.3.3.7	INTEGER	read-only
IP sfadminAuthenticationFailure	1.3.6.1.4.1.97.5.3.3.8	IpAddress	read-only
CTR sfadminMPReceiveCongests	1.3.6.1.4.1.97.5.3.3.9	Counter	read-only
CTR sfadminArpEntries	1.3.6.1.4.1.97.5.3.3.10	Counter	read-only
CTR sfadminArpStatics	1.3.6.1.4.1.97.5.3.3.11	Counter	read-only
CTR sfadminArpOverflows	1.3.6.1.4.1.97.5.3.3.12	Counter	read-only
CTR sfadminIpEntries	1.3.6.1.4.1.97.5.3.3.13	Counter	read-only
CTR sfadminIpStatics	1.3.6.1.4.1.97.5.3.3.14	Counter	read-only
INT sfadminStaticPreference	1.3.6.1.4.1.97.5.3.3.15	INTEGER	read-write
INT sfadminRipPreference	1.3.6.1.4.1.97.5.3.3.16	INTEGER	read-write
CTR sfadminRipRouteDiscards	1.3.6.1.4.1.97.5.3.3.17	Counter	read-only
INT sfadminRebootConfig	1.3.6.1.4.1.97.5.3.3.18	INTEGER	read-write
INT sfadminTempOK	1.3.6.1.4.1.97.5.3.3.19	INTEGER	read-only
INT sfadminDisableButton	1.3.6.1.4.1.97.5.3.3.20	INTEGER	read-write
INT sfadminButtonSelection	1.3.6.1.4.1.97.5.3.3.21	INTEGER	read-write
INT sfadminLEDProgramOption	1.3.6.1.4.1.97.5.3.3.22	INTEGER	read-write
OCT sfadminVirtualSwitch1	1.3.6.1.4.1.97.5.3.3.23	OCTET STRING	read-write
OCT sfadminVirtualSwitch2	1.3.6.1.4.1.97.5.3.3.24	OCTET STRING	read-write
OCT sfadminVirtualSwitch3	1.3.6.1.4.1.97.5.3.3.25	OCTET STRING	read-write
OCT sfadminVirtualSwitch4	1.3.6.1.4.1.97.5.3.3.26	OCTET STRING	read-write
INT sfadminDefaultVirtualSwitch	1.3.6.1.4.1.97.5.3.3.27	INTEGER	read-write	Default virtual switch number when accessing the MIB via SNMP. Set this attribute prior to accessing the Bridge MIB records.
sfswdis	1.3.6.1.4.1.97.5.3.4
OCT sfswdisDesc	1.3.6.1.4.1.97.5.3.4.1	OCTET STRING	read-only
INT sfswdisAccess	1.3.6.1.4.1.97.5.3.4.2	INTEGER	read-write
INT sfswdisWriteStatus	1.3.6.1.4.1.97.5.3.4.3	INTEGER	read-only
IP sfswdisConfigIp	1.3.6.1.4.1.97.5.3.4.4	IpAddress	read-write
INT sfswdisConfigRetryTime	1.3.6.1.4.1.97.5.3.4.5	INTEGER	read-write
INT sfswdisConfigTotalTimeout	1.3.6.1.4.1.97.5.3.4.6	INTEGER	read-write
sfaddr	1.3.6.1.4.1.97.5.3.5
CTR sfaddrDynamics	1.3.6.1.4.1.97.5.3.5.1	Counter	read-only
GAU sfaddrDynamicMax	1.3.6.1.4.1.97.5.3.5.2	Gauge	read-write
INT sfaddrFlags	1.3.6.1.4.1.97.5.3.5.3	INTEGER	read-write
OCT sfaddrMAC	1.3.6.1.4.1.97.5.3.5.4	OCTET STRING	read-write
INT sfaddrPort	1.3.6.1.4.1.97.5.3.5.5	INTEGER	read-write
INT sfaddrOperation	1.3.6.1.4.1.97.5.3.5.6	INTEGER	read-write
INT sfaddrIndex	1.3.6.1.4.1.97.5.3.5.7	INTEGER	read-write
INT sfaddrNext	1.3.6.1.4.1.97.5.3.5.8	INTEGER	read-write
INT sfaddrBlockSize	1.3.6.1.4.1.97.5.3.5.9	INTEGER	read-write
OCT sfaddrBlock	1.3.6.1.4.1.97.5.3.5.10	OCTET STRING	read-write
OCT sfaddrAlarmMAC	1.3.6.1.4.1.97.5.3.5.11	OCTET STRING	read-only
INT sfaddrDbFullBuckets	1.3.6.1.4.1.97.5.3.5.12	INTEGER	read-only
INT sfaddrDbMaxFullBuckets	1.3.6.1.4.1.97.5.3.5.13	INTEGER	read-write
INT sfaddrDbMaxSize	1.3.6.1.4.1.97.5.3.5.14	INTEGER	read-only
INT sfaddrDbBuckets	1.3.6.1.4.1.97.5.3.5.15	INTEGER	read-only
INT sfaddrDbSearchDepth	1.3.6.1.4.1.97.5.3.5.16	INTEGER	read-write
OCT sfaddrDbDistribution	1.3.6.1.4.1.97.5.3.5.17	OCTET STRING	read-only
sfaddrDbTable	1.3.6.1.4.1.97.5.3.5.18		not-accessible
sfaddrDbEntry	1.3.6.1.4.1.97.5.3.5.18.1		not-accessible
OCT sfaddrDbBucketAddress	1.3.6.1.4.1.97.5.3.5.18.1.1	OCTET STRING	read-only
INT sfaddrDbBucketEntCnt	1.3.6.1.4.1.97.5.3.5.18.1.2	INTEGER	read-only
OCT sfaddrDbBucketEntries	1.3.6.1.4.1.97.5.3.5.18.1.3	OCTET STRING	read-only
sfif	1.3.6.1.4.1.97.5.3.6
sfifTable	1.3.6.1.4.1.97.5.3.6.1		not-accessible
sfifEntry	1.3.6.1.4.1.97.5.3.6.1.1		not-accessible
INT sfifIndex	1.3.6.1.4.1.97.5.3.6.1.1.1	INTEGER	read-only
INT sfifRxCnt	1.3.6.1.4.1.97.5.3.6.1.1.2	INTEGER	read-only
INT sfifTxCnt	1.3.6.1.4.1.97.5.3.6.1.1.3	INTEGER	read-only
INT sfifTxStormCnt	1.3.6.1.4.1.97.5.3.6.1.1.4	INTEGER	read-write
TIK sfifTxStormTime	1.3.6.1.4.1.97.5.3.6.1.1.5	TimeTicks	read-write
INT sfifFilterFloodSourceSame	1.3.6.1.4.1.97.5.3.6.1.1.6	INTEGER	read-write
INT sfifFunction	1.3.6.1.4.1.97.5.3.6.1.1.7	INTEGER	read-only
OCT sfifRxPacket	1.3.6.1.4.1.97.5.3.6.1.1.8	OCTET STRING	read-only
CTR sfifRxHwFCSs	1.3.6.1.4.1.97.5.3.6.1.1.9	Counter	read-only
CTR sfifRxQueues	1.3.6.1.4.1.97.5.3.6.1.1.10	Counter	read-only
OCT sfifTxPacket	1.3.6.1.4.1.97.5.3.6.1.1.11	OCTET STRING	read-only
CTR sfifTxStorms	1.3.6.1.4.1.97.5.3.6.1.1.12	Counter	read-only
TIK sfifStatisticsTime	1.3.6.1.4.1.97.5.3.6.1.1.13	TimeTicks	read-only
IP sfifIpAddr	1.3.6.1.4.1.97.5.3.6.1.1.14	IpAddress	read-write
IP sfifIpGroupAddr	1.3.6.1.4.1.97.5.3.6.1.1.15	IpAddress	read-write
CTR sfifRxForwardChars	1.3.6.1.4.1.97.5.3.6.1.1.16	Counter	read-only
CTR sfifRxFilteredChars	1.3.6.1.4.1.97.5.3.6.1.1.17	Counter	read-only
INT sfifSpeed	1.3.6.1.4.1.97.5.3.6.1.1.18	INTEGER	read-write
INT sfifMgntRxQueueSize	1.3.6.1.4.1.97.5.3.6.1.1.19	INTEGER	read-write
INT sfifVirtualSwitchID	1.3.6.1.4.1.97.5.3.6.1.1.20	INTEGER	read-only
INT sfifTPLinkOK	1.3.6.1.4.1.97.5.3.6.1.1.21	INTEGER	read-only
INT sfifLedOn	1.3.6.1.4.1.97.5.3.6.1.1.22	INTEGER	read-only
CTR sfifTxCollisions	1.3.6.1.4.1.97.5.3.6.1.1.23	Counter	read-only
INT sfifFuseOkay	1.3.6.1.4.1.97.5.3.6.1.1.24	INTEGER	read-only
CTR sfifCrashEvents	1.3.6.1.4.1.97.5.3.6.1.1.25	Counter	read-write
TIK sfifCrashTime	1.3.6.1.4.1.97.5.3.6.1.1.26	TimeTicks	read-write
TIK sfifMinimumUpTime	1.3.6.1.4.1.97.5.3.6.1.1.27	TimeTicks	read-write
INT sfifDMAFlowControlEnable	1.3.6.1.4.1.97.5.3.6.1.1.28	INTEGER	read-write
INT sfifDMARetryCount	1.3.6.1.4.1.97.5.3.6.1.1.29	INTEGER	read-write
INT sfifDMARetryBufferCount	1.3.6.1.4.1.97.5.3.6.1.1.30	INTEGER	read-write
CTR sfifDMAPeakRetries	1.3.6.1.4.1.97.5.3.6.1.1.31	Counter	read-only
CTR sfifDMATotalRetries	1.3.6.1.4.1.97.5.3.6.1.1.32	Counter	read-only
CTR sfifDMAPackets	1.3.6.1.4.1.97.5.3.6.1.1.33	Counter	read-only
CTR sfifDMADroppedPackets	1.3.6.1.4.1.97.5.3.6.1.1.34	Counter	read-only
STR sfifDescr	1.3.6.1.4.1.97.5.3.6.1.1.35	DisplayString	read-write
CTR sfifMgtDroppedPackets	1.3.6.1.4.1.97.5.3.6.1.1.36	Counter	read-only
CTR sfifLinkStatusOutages	1.3.6.1.4.1.97.5.3.6.1.1.37	Counter	read-only
INT sfifLocalFilter	1.3.6.1.4.1.97.5.3.6.1.1.38	INTEGER	read-write
sfuart	1.3.6.1.4.1.97.5.3.7
sfuartTable	1.3.6.1.4.1.97.5.3.7.1		not-accessible
sfuartEntry	1.3.6.1.4.1.97.5.3.7.1.1		not-accessible
INT sfuartIndex	1.3.6.1.4.1.97.5.3.7.1.1.1	INTEGER	read-only
INT sfuartBaud	1.3.6.1.4.1.97.5.3.7.1.1.2	INTEGER	read-write
CTR sfuartAlignmentErrors	1.3.6.1.4.1.97.5.3.7.1.1.3	Counter	read-only
CTR sfuartOverrunErrors	1.3.6.1.4.1.97.5.3.7.1.1.4	Counter	read-only
sfdebug	1.3.6.1.4.1.97.5.3.8
INT sfdebugStringID	1.3.6.1.4.1.97.5.3.8.1	INTEGER	read-only
OCT sfdebugString	1.3.6.1.4.1.97.5.3.8.2	OCTET STRING	read-only
sfdebugTable	1.3.6.1.4.1.97.5.3.8.3		not-accessible
sfdebugEntry	1.3.6.1.4.1.97.5.3.8.3.1		not-accessible
INT sfdebugIndex	1.3.6.1.4.1.97.5.3.8.3.1.1	INTEGER	read-only
INT sfdebugOperation	1.3.6.1.4.1.97.5.3.8.3.1.2	INTEGER	read-write
INT sfdebugBase	1.3.6.1.4.1.97.5.3.8.3.1.3	INTEGER	read-write
INT sfdebugLength	1.3.6.1.4.1.97.5.3.8.3.1.4	INTEGER	read-write
OCT sfdebugData	1.3.6.1.4.1.97.5.3.8.3.1.5	OCTET STRING	read-write
sfproto	1.3.6.1.4.1.97.5.3.9
sfprotoTable	1.3.6.1.4.1.97.5.3.9.1		not-accessible	This table contains configuration information specify- ing the types of protocols used to bridge, route, translate, and filter frames for each port.
sfprotoEntry	1.3.6.1.4.1.97.5.3.9.1.1		not-accessible	Each entry in this table specifies which protocols are used by a particular port in the ES/1.
INT sfprotoIfIndex	1.3.6.1.4.1.97.5.3.9.1.1.1	INTEGER	read-only	Identifies the interface (port) to which this entry's information belongs. The value of this variable corresponds to ifIndex, as well as most of the other port identification values in related MIBs.
INT sfprotoBridge	1.3.6.1.4.1.97.5.3.9.1.1.2	INTEGER	read-write	Defines the bridging method to be applied to frames received at, or destined for, this port. Ethernet and FDDI ports may be configured for transparent, srt, or none. Token Ring ports may be configured for any of the four options. The UART may only be configured to none.
INT sfprotoSuppressBpdu	1.3.6.1.4.1.97.5.3.9.1.1.3	INTEGER	read-write	Allows transmission of spanning tree protocol packets to be suppressed. If normal(1), 802.1d spanning tree packets and source-routing spanning tree packets are transmitted as usual. If suppressed(2), these packets are not transmitted. This option may be needed for in- teroperability with non-802.1d spanning tree protocols (e.g., DEC LanBridge 100).
INT sfprotoRipListen	1.3.6.1.4.1.97.5.3.9.1.1.4	INTEGER	read-write	Specifies whether the port should listen for internet Routing Information Protocol (RFC-1058) packets, in order to build the routing table for the unit.
INT sfprotoTrunking	1.3.6.1.4.1.97.5.3.9.1.1.5	INTEGER	read-write	Specifies whether SMC's trunking protocol (an extension to the standard Spanning Tree) is to be used over this port.
sftrunk	1.3.6.1.4.1.97.5.3.10
sftrunkTable	1.3.6.1.4.1.97.5.3.10.1		not-accessible	This table describes the trunking status and attributes of the interfaces that are configured for bridge trunking.
sftrunkEntry	1.3.6.1.4.1.97.5.3.10.1.1		not-accessible	An entry exists in this table for each physical interface (port) that is configured for trunking.
INT sftrunkIfIndex	1.3.6.1.4.1.97.5.3.10.1.1.1	INTEGER	read-only	Identifies a physical interface (port) which is configured for LAN trunking. The value of this variable corresponds to ifIndex, as well as most of the other port identification values in related MIBs.
INT sftrunkState	1.3.6.1.4.1.97.5.3.10.1.1.2	INTEGER	read-only	If closed(1) then this link has not yet received any Trunking PDUs. If oneway(2) then incoming Trunking PDUs do not indicate that our PDUs are being successfully received by the far end. If joined(3) then this link is actively participating in the trunk group. If helddown(4) then an error has been detected and the link is being held out-of-service until the error clears.
OCT sftrunkRemoteBridgeId	1.3.6.1.4.1.97.5.3.10.1.1.3	OCTET STRING	read-only	The bridge ID of the remote bridge.
IP sftrunkRemoteIp	1.3.6.1.4.1.97.5.3.10.1.1.4	IpAddress	read-only	The IP address of the remote bridge, as reported by that bridge for administrative purposes.
INT sftrunkLastError	1.3.6.1.4.1.97.5.3.10.1.1.5	INTEGER	read-only	The reason for failure when the link is in helddown state.
INT sftrunkLinkOrdinal	1.3.6.1.4.1.97.5.3.10.1.1.6	INTEGER	read-only	The position of this link within the trunk group.
INT sftrunkLinkCount	1.3.6.1.4.1.97.5.3.10.1.1.7	INTEGER	read-only	The number of links within the trunk group.
INT sftrunkLastChange	1.3.6.1.4.1.97.5.3.10.1.1.8	INTEGER	read-only	The number of seconds since sftrunkState changed.
sfworkGroup	1.3.6.1.4.1.97.5.3.11
INT sfworkGroupNextIndex	1.3.6.1.4.1.97.5.3.11.1	INTEGER	read-only	The next available workgroup index to be used. When creating a new workgroup, it is recommended to read the value of the variable and use it to key into the workgroup table.
INT sfworkGroupCurrentCounts	1.3.6.1.4.1.97.5.3.11.2	INTEGER	read-only	The total number of workgroups currently defined.
INT sfworkGroupMaxCount	1.3.6.1.4.1.97.5.3.11.3	INTEGER	read-only	The maximum number of workgroups allowed.
sfworkGroupTable	1.3.6.1.4.1.97.5.3.11.4		not-accessible	This table contains work group definitions for the interfaces.
sfworkGroupEntry	1.3.6.1.4.1.97.5.3.11.4.1		not-accessible	Each entry in this table contains a definition of a work group.
INT sfworkGroupIndex	1.3.6.1.4.1.97.5.3.11.4.1.1	INTEGER	read-only	An integer that identifies the work group, used as an index to this table.
STR sfworkGroupName	1.3.6.1.4.1.97.5.3.11.4.1.2	DisplayString	read-write	A 1-16 character work group name.
INT sfworkGroupType	1.3.6.1.4.1.97.5.3.11.4.1.3	INTEGER	read-write	The type of work group.
OCT sfworkGroupPort	1.3.6.1.4.1.97.5.3.11.4.1.4	OCTET STRING	read-write	A list of all ports within the group. The first octet specified ports 1-8, the second 9-16, etc.

RFC description

FN100-MIB provides management objects for Fujitsu Nonstop system monitoring and fault management.

Start monitoring Legacy Fast Ethernet hub/switch (enterprise OID 3, CMU-registered) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FN100-MIB

What Is FN100-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description