CISCO-WAN-3G-MIB

All MIBs › CISCO-WAN-3G-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2013-08-12

Category: Network Interfaces, Vendor: Cisco Devices

Description: Manages Cisco WAN 3G cellular interfaces on MGX platform for mobile broadband WAN connectivity.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-WAN-3G-MIB?

The CISCO-WAN-3G-MIB is a Cisco module for managing and monitoring 3G/4G LTE cellular WAN interfaces on Cisco routers, used for mobile broadband backup or primary WAN connectivity. It exposes data on modem operating state, current and previous cellular service type, roaming status, connection status, and notification objects carrying radio-service and signal-strength information. Its monitoring value is centered on hardware/link status: it reveals whether the cellular modem is connected, what radio technology (e.g., LTE vs. 1xRTT) it is currently using, whether the device is roaming, and its signal strength, functioning much like link-health monitoring for a cellular physical interface. It is a cellular-specific extension that complements the standard IF-MIB, since the cellular interface also appears as a regular ifEntry. It is deployed on Cisco routers with 3G/4G WAN interface modules used for branch-office cellular backup or primary connectivity. Engineers can download the CISCO-WAN-3G-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-WAN-3G-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco routers with 3G/4G LTE WAN interface modules

Monitoring Examples

An engineer polls c3gWanCommonTable/c3gWanCommonEntry for a given interface to check c3gModemState and c3gConnectionStatus, confirming the cellular modem is registered and connected, and monitors c3gRoamingStatus to catch unexpected roaming. A c3gNotifRssi trap showing degraded signal strength combined with c3gCurrentServiceType falling back from LTE to 1xRTT would explain a branch office's WAN backup link running at reduced throughput.

What Can Be Monitored

cellular modem state
connection status
current/previous service type (radio technology)
roaming status
signal strength (RSSI)

Imported Objects

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From ENTITY-MIB

entPhysicalIndex	OBJECT-TYPE
entPhysicalName	OBJECT-TYPE

From IF-MIB

ifIndex

OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using c3gCdmaTotalCallDuration OID:

Select a Cisco routers with 3G/4G LTE WAN interface module as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type c3gCdmaTotalCallDuration into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the total duration of all calls. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in seconds), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
U32 c3g1xRttBandClass	1.3.6.1.4.1.9.9.661.1.2.6.2.1.2	Unsigned32	read-only	This object contains 1xRTT band class.
STR c3gAaaPassword	1.3.6.1.4.1.9.9.661.1.2.5.2.1.3	DisplayString	read-write	This object indicates the password for AAA.
STR c3gAccountActivationDate	1.3.6.1.4.1.9.9.661.1.2.3.1.3	DisplayString	read-only	Modem account activation date.
INT c3gAuthStatus	1.3.6.1.4.1.9.9.661.1.2.2.1.10	INTEGER	read-only	Connection authentication status: unknown(1) - authentication status is unknown notAuthenticated(2) - not yet authenticated. authenticated(3) - authenticated. failed(4) - authentication failed. authenticationDisabled(5) - authentication disabled
I32 c3gBandClassIndex	1.3.6.1.4.1.9.9.661.1.2.6.2.1.1	Integer32	not-accessible	Band class index, combined with entPhysicalIndex to access the band class table.
C3G c3gCapability	1.3.6.1.4.1.9.9.661.1.1.1.2	C3gServiceCapability	read-only	Cellular service capability. It currently includes the 2G, 3G and 4G-LTE standard.
U32 c3gCarrierToInterferenceRatio	1.3.6.1.4.1.9.9.661.1.2.6.3.1.12	Unsigned32	read-only	Carrier to interference ratio. Carrier-to-Interference ratio (C/I) is the ratio of power in an RF carrier to the interference power in the channel.
c3gCdma1xRttBandClassEntry	1.3.6.1.4.1.9.9.661.1.2.6.2.1		not-accessible	An entry (conceptual row) in the c3gCdma1xRttBandClassTable.
c3gCdma1xRttBandClassTable	1.3.6.1.4.1.9.9.661.1.2.6.2		not-accessible	Cellular 3G CDMA 1xRTT band class table. This table contains band class information for each available band.
c3gCdma1xRttRadioEntry	1.3.6.1.4.1.9.9.661.1.2.6.1.1		not-accessible	An entry (conceptual row) in the c3gCdma1xRttRadioTable.
c3gCdma1xRttRadioTable	1.3.6.1.4.1.9.9.661.1.2.6.1		not-accessible	Cellular 3G CDMA 1xRTT radio table.
c3gCdmaConnectionEntry	1.3.6.1.4.1.9.9.661.1.2.2.1		not-accessible	An entry (conceptual row) in the c3gCdmaConnectionTable.
c3gCdmaConnectionTable	1.3.6.1.4.1.9.9.661.1.2.2		not-accessible	Cellular 3G CDMA connection table. This table describes logical connections/calls over wireless link, the wireless link is described in c3gCdmaSessionTable.
U32 c3gCdmaCurrentCallDuration	1.3.6.1.4.1.9.9.661.1.2.2.1.18	Unsigned32	read-only	Current call duration.
INT c3gCdmaCurrentCallStatus	1.3.6.1.4.1.9.9.661.1.2.2.1.17	INTEGER	read-only	Current call status.
INT c3gCdmaCurrentCallType	1.3.6.1.4.1.9.9.661.1.2.2.1.19	INTEGER	read-only	Current call type.
C64 c3gCdmaCurrentReceived	1.3.6.1.4.1.9.9.661.1.2.2.1.16	Counter64	read-only	Current number of bytes received by modem for current connection.
INT c3gCdmaCurrentRoamingStatus	1.3.6.1.4.1.9.9.661.1.2.4.1.3	INTEGER	read-only	Current 1xRTT roaming status, roaming is a general term in wireless telecommunications that refers to the extending of connectivity service in a location that is different from the home location where the service was registered: unknown(1) - roaming status is unknown. home(2) - connectivity service in home location. roamingWithSid(3) - roaming with SID. roamingWithoutSid(4) - roaming without SID
STR c3gCdmaCurrentServiceStatus	1.3.6.1.4.1.9.9.661.1.2.4.1.1	DisplayString	read-only	Current service status.
C64 c3gCdmaCurrentTransmitted	1.3.6.1.4.1.9.9.661.1.2.2.1.15	Counter64	read-only	Current number of bytes transmitted by modem for current connection.
c3gCdmaEvDoBandClassEntry	1.3.6.1.4.1.9.9.661.1.2.6.4.1		not-accessible	An entry (conceptual row) in the c3gCdmaEvDoBandClassTable.
c3gCdmaEvDoBandClassTable	1.3.6.1.4.1.9.9.661.1.2.6.4		not-accessible	Cellular 3G CDMA EV-DO band class table. This table contains band class information for each available band.
c3gCdmaEvDoRadioEntry	1.3.6.1.4.1.9.9.661.1.2.6.3.1		not-accessible	An entry (conceptual row) in the c3gCdmaEvDoRadioTable.
c3gCdmaEvDoRadioTable	1.3.6.1.4.1.9.9.661.1.2.6.3		not-accessible	Cellular 3G CDMA EV-DO radio table.
OCT c3gCdmaHistory1xRttRssiPerHour	1.3.6.1.4.1.9.9.661.1.2.6.5.1.3	OCTET STRING	read-only	Per-hour 1xRTT weakest RSSI value history. This object contains a per-hour history of 1xRTT weakest RSSI values for the last 72 hours. The octet in the string is the weakest RSSI value measured in an hour interval.
OCT c3gCdmaHistory1xRttRssiPerMinute	1.3.6.1.4.1.9.9.661.1.2.6.5.1.2	OCTET STRING	read-only	Per-minute 1xRTT weakest RSSI value history. This object contains a per-minute history of 1xRTT weakest RSSI values for the last 60 minutes. The octet in the string is the weakest RSSI value measured in a minute interval.
OCT c3gCdmaHistory1xRttRssiPerSecond	1.3.6.1.4.1.9.9.661.1.2.6.5.1.1	OCTET STRING	read-only	Per-second 1xRTT RSSI history. This object contains a per-second history of 1xRTT RSSI values for the last 60 seconds.
c3gCdmaHistoryEntry	1.3.6.1.4.1.9.9.661.1.2.6.5.1		not-accessible	An entry (conceptual row) in the c3gCdmaHistoryTable.
OCT c3gCdmaHistoryEvDoRssiPerHour	1.3.6.1.4.1.9.9.661.1.2.6.5.1.6	OCTET STRING	read-only	Per-hour EV-DO weakest RSSI value history. This object contains a per-hour history of EV-DO weakest RSSI values for the last 72 hours. The octet in the string is the weakest RSSI value measured in an hour interval.
OCT c3gCdmaHistoryEvDoRssiPerMinute	1.3.6.1.4.1.9.9.661.1.2.6.5.1.5	OCTET STRING	read-only	Per-minute EV-DO weakest RSSI value history. This object contains a per-minute history of EV-DO weakest RSSI values for the last 60 minutes. The octet in the string is the weakest RSSI value measured in a minute interval.
OCT c3gCdmaHistoryEvDoRssiPerSecond	1.3.6.1.4.1.9.9.661.1.2.6.5.1.4	OCTET STRING	read-only	Per-second EV-DO RSSI history. This object contains a per-second history of EV-DO RSSI values for the last 60 seconds.
c3gCdmaHistoryTable	1.3.6.1.4.1.9.9.661.1.2.6.5		not-accessible	Cellular 3G CDMA history table. The history of RSSI are carried in an octet of string. Each octet in the octet string has a value from 0 to 150 and the 255 value is reserved to indicate an uninitialized (Invalid) value. The format of the octet string with n octets is as following: [ octet 0 is latest, octet 1 is latest-1, . . octet n-2 is oldest-1, octet n-1 is oldest ] To convert the provided value into dBm the following formula should be used: dBm = (-1)*value;
INT c3gCdmaHybridModePreference	1.3.6.1.4.1.9.9.661.1.2.4.1.2	INTEGER	read-write	This object indicates the hybrid mode preference: unknown(1) - preference unknown hybrid(2) - connect to EV-DO/1xRTT services evDoOnly(3) - connect to only EV-DO service oneXRttOnly(4) - connect to only 1xRTT service
c3gCdmaIdentityEntry	1.3.6.1.4.1.9.9.661.1.2.3.1		not-accessible	An entry (conceptual row) in the c3gCdmaIdentityTable.
c3gCdmaIdentityTable	1.3.6.1.4.1.9.9.661.1.2.3		not-accessible	Cellular 3G CDMA identity table.
INT c3gCdmaLastCallDisconnReason	1.3.6.1.4.1.9.9.661.1.2.2.1.20	INTEGER	read-only	Last call disconnect reason: unknown(1) - Unknown modemOffline(2) - Modem offline modemCdmaLocTilPowCyc(3) - Modem CDMA locked till power cycle noService(4) - No service abnormalCallEnd(5) - Abnormal call end baseStatIntercept(6) - Base station intercept baseStatRelease(7) - Base station release baseStatReleaseNoReas(8) - Base station release (No reason) baseStatReleaseSoRej(9) - Base station release (SO reject) incomingCall(10) - Incoming call baseStatAlertStop(11) - Base station alert stop clientEndedCall(12) - Client ended call activationEndedOtasp(13) - Activation ended OTASP (Over- The-Air Service Provisioning) ndssFailure(14) - NDSS (Network and Distributed System Security) failure maxAccesProbTransmit(15) - Max access probes transmitted persistTestFailure(16) - Persistence test failure ruimNotPresent(17) - RUIM (Removable User Identity Module) not present accessAttemptInProg(18) - Access attempt in progress reasonUnspecified(19) - Reason unspecified recdRetryOrder(20) - Recd retry order modemLocked(21) - Modem Locked gpsCallEnded(22) - GPS call ended smsCallEnded(23) - SMS (Short Message Service) call ended noConcurrentService(24) - No concurrent service noResponseFromBs(25) - No response from BS (Base station) rejectedByBs(26) - Rejected by BS notCompatConcurServ(27) - Not compatible concurrent service accessBlockedByBs(28) - Access blocked by BS alreadyOnTraffChann(29) - Already on Traffic channel emergencyCall(30) - Emergency call dataCallEnded(31) - Data call ended busyHdr(32) - Busy (HDR) billingOrAuthErrHdr(33) - Billing or Auth error (HDR) sysChangeDueToPrlHdr(34) - System change due to PRL (HDR) hdrExitDueToPrl(35) - HDR exit due to PRL (HDR) noSessionHdr(36) - No Session (HDR) callEndedHdr(37) - Call ended (HDR)
INT c3gCdmaLastConnError	1.3.6.1.4.1.9.9.661.1.2.2.1.21	INTEGER	read-only	Last connect error: none(1) - None invalidClientId(2) - Invalid client ID badCallType(3) - Bad call type badServiceType(4) - Bad service type expectingNumber(5) - Expecting number nullNumberBuffer(6) - Null number buffer invalidDigits(7) - Invalid digits outOfRangeNumber(8) - Out of range number nullAalphaBuffer(9) - Null alpha buffer outOfRangeAlphaNumber(10) - Out of range alpha number invalidOtaspActivatCode(11) - Invalid OTASP activation code modemOffline(12) - Modem offline modemLocked(13) - Modem locked unsupportedFlash(14) - Unsupported flash dialedNumberProhibited(15) - Dialed number prohibited onlyE911Calls(16) - Only E911 calls modemInUse(17) - Modem in use unsupportedServiceType(18) - Unsupported service type wrongCallType(19) - Wrong call type invalidCommandCallState(20) - Invalid command (call state) invalidCommandModemState(21) - Invalid command (modem state) noValidService(22) - No valid service cannotAnswerIncomingCall(23) - Cannot answer incoming call badPrivacySetting(24) - Bad privacy setting noCommandBuffers(25) - No command buffers communicationProblem(26) - Communication problem unspecifiedError(27) - Unspecified error invalidLastActiveNetwork(28) - Invalid last active network noCollocatedHdr(29) - No collocated HDR uimNotPresent(30) - UIM (User Identity Module) not present
c3gCdmaNetworkEntry	1.3.6.1.4.1.9.9.661.1.2.4.1		not-accessible	An entry (conceptual row) in the c3gCdmaNetworkTable.
c3gCdmaNetworkTable	1.3.6.1.4.1.9.9.661.1.2.4		not-accessible	Cellular 3G CDMA network table.
INT c3gCdmaPinSecurityStatus	1.3.6.1.4.1.9.9.661.1.2.7.1.1.1	INTEGER	read-write	CDMA Personal Identification Number (PIN) security: unknown(1) - PIN security unknown locked(2) - PIN security is locked unlocked(3) - PIN security is unlocked
INT c3gCdmaPowerUpLockStatus	1.3.6.1.4.1.9.9.661.1.2.7.1.1.2	INTEGER	read-write	CDMA power up lock: unknown(1) - power up lock unknown enabled(2) - power up lock enabled disabled(3) - power up lock disabled
c3gCdmaProfile	1.3.6.1.4.1.9.9.661.1.2.5
c3gCdmaProfileCommonEntry	1.3.6.1.4.1.9.9.661.1.2.5.1.1		not-accessible	An entry (conceptual row) in the c3gCdmaProfileCommonTable.
c3gCdmaProfileCommonTable	1.3.6.1.4.1.9.9.661.1.2.5.1		not-accessible	Cellular 3G CDMA profile common table.
c3gCdmaProfileEntry	1.3.6.1.4.1.9.9.661.1.2.5.2.1		not-accessible	An entry (conceptual row) in the c3gCdmaProfileTable.
I32 c3gCdmaProfileIndex	1.3.6.1.4.1.9.9.661.1.2.5.2.1.1	Integer32	not-accessible	Profile index, combined with entPhysicalIndex to access the profile table c3gCdmaProfileTable.
c3gCdmaProfileTable	1.3.6.1.4.1.9.9.661.1.2.5.2		not-accessible	Cellular 3G CDMA profile table.
c3gCdmaRadio	1.3.6.1.4.1.9.9.661.1.2.6
INT c3gCdmaRoamingPreference	1.3.6.1.4.1.9.9.661.1.2.3.1.4	INTEGER	read-write	This object indicates the roaming preference: unknown(1) - preference unknown home(2) - home networks only affiliated(3) - roaming on affiliated networks any(4) - roaming on any network
c3gCdmaSecurity	1.3.6.1.4.1.9.9.661.1.2.7
c3gCdmaSecurityEntry	1.3.6.1.4.1.9.9.661.1.2.7.1.1		not-accessible	An entry (conceptual row) in the c3gCdmaSecurityTable.
c3gCdmaSecurityTable	1.3.6.1.4.1.9.9.661.1.2.7.1		not-accessible	Cellular 3G CDMA security table.
c3gCdmaSessionEntry	1.3.6.1.4.1.9.9.661.1.2.1.1		not-accessible	An entry (conceptual row) in the c3gCdmaSessionTable.
c3gCdmaSessionTable	1.3.6.1.4.1.9.9.661.1.2.1		not-accessible	This table describes wireless session (link) created when a modem connects to a particular cellular network. One or more logical calls can be placed over wireless session(link). These logical calls are represented in the c3gCdmaConnectionTable.
C64 c3gCdmaTotalCallDurationEx	1.3.6.1.4.1.9.9.661.1.2.1.1.1	Counter64	read-only	Total duration of all calls.
C64 c3gCdmaTotalReceived	1.3.6.1.4.1.9.9.661.1.2.1.1.3	Counter64	read-only	Total data received for all calls. It is the total amount of data received by modem, not to be confused with the number of bytes received from the interface.
C64 c3gCdmaTotalTransmitted	1.3.6.1.4.1.9.9.661.1.2.1.1.2	Counter64	read-only	Total data transmitted for all calls. It is the total amount of data transmitted by modem, not to be confused with the number of bytes transmitted through the interface.
U32 c3gColorCode	1.3.6.1.4.1.9.9.661.1.2.2.1.5	Unsigned32	read-only	Color code. A sync channel may be used by the base station to communicate administrative information to a mobile station. For example, a base station may transmit a base station ID to a user, a color code and administrative information identifying system status.
INT c3gConnectionStatus	1.3.6.1.4.1.9.9.661.1.1.1.8	INTEGER	read-only	Indicates the current connection status.
NTF c3gConnectionStatusChangedNotif	1.3.6.1.4.1.9.9.661.0.5			Notification for connection status change event. Objects c3gConnectionStatus and c3gCurrentServiceType will be included in the notification. Users can use object c3gConnectionStatusChangedNotifFlag to control what connection status changes will cause the generation of this notification.
BIT c3gConnectionStatusChangedNotifFlag	1.3.6.1.4.1.9.9.661.1.1.1.24	Bits	read-write	This object is the flag bitmap to control the generation of notification c3gConnectionStatusChangedNotif. e.g. setting bit 0 (error(0)) to 1 and bit 4 (disconnected(4)) to 1 will cause the notification c3gConnectionStatusChangedNotif to be generated when object c3gConnetionStatus changes the status to error or disconnected. The default value of this object is '00'H.
I32 c3gCurrent1xRttChannelNumber	1.3.6.1.4.1.9.9.661.1.2.6.1.1.3	Integer32	read-only	Current 1xRTT channel number. Current channel number to which the modem is attached to the base station. Value of '-1' indicates 'No Service'.
INT c3gCurrent1xRttChannelState	1.3.6.1.4.1.9.9.661.1.2.6.1.1.4	INTEGER	read-only	Current 1xRTT channel state. Indicates whether the modem is scanning or has acquired the channel.
C3G c3gCurrent1xRttEcIo	1.3.6.1.4.1.9.9.661.1.2.6.1.1.2	C3gEcIo	read-only	Current 1xRTT Ec/Io value.
C3G c3gCurrent1xRttRssi	1.3.6.1.4.1.9.9.661.1.2.6.1.1.1	C3gRssi	read-only	Current 1xRTT RSSI value.
U32 c3gCurrentActiveDataProfile	1.3.6.1.4.1.9.9.661.1.2.5.1.1.2	Unsigned32	read-write	The current active data profile.
INT c3gCurrentCallSetupMode	1.3.6.1.4.1.9.9.661.1.2.4.1.7	INTEGER	read-write	Current call setup mode. The 1xEV-DO system supports packet data connections to a public or private data network using either mobile IP or simple IP protocol. For simple IP protocol, moving from the coverage area of one PDSN to another PDSN constitutes a change in packet data session. For mobile IP protocol, a packet data session can span several PDSNs as long as the user continuously maintains mobility bindings at the Home Agent (the IP address is persistent). The modes are: unknown(1) - mode is unknown simpleIpOnly(2) - simple IP only mobileIpPreferWithSipFallback(3) - prefer mobile IP with simple IP as fallback mode mobileIpOnly(4) - mobile IP only
I32 c3gCurrentEvDoChannelNumber	1.3.6.1.4.1.9.9.661.1.2.6.3.1.3	Integer32	read-only	Current EV-DO channel number. Current channel number to which the modem is attached to the base station. Value of '-1' indicates 'No Service'.
C3G c3gCurrentEvDoEcIo	1.3.6.1.4.1.9.9.661.1.2.6.3.1.2	C3gEcIo	read-only	Current EV-DO Ec/Io value.
C3G c3gCurrentEvDoRssi	1.3.6.1.4.1.9.9.661.1.2.6.3.1.1	C3gRssi	read-only	Current EV-DO RSSI value.
C3G c3gCurrentGsmEcIo	1.3.6.1.4.1.9.9.661.1.3.4.1.1.2	C3gEcIo	read-only	The GPRS, UMTS or LTE Ec/Io value.
C3G c3gCurrentGsmRssi	1.3.6.1.4.1.9.9.661.1.3.4.1.1.1	C3gRssi	read-only	The GPRS/UMTS/LTE RSSI value.
INT c3gCurrentIdleDigitalMode	1.3.6.1.4.1.9.9.661.1.2.4.1.4	INTEGER	read-only	Current idle digital mode: unknown(1) - service is unknown noService(2) - no service amps(3) - Advanced Mobile Phone Service (AMPS) cdma(4) - Code Division Multiple Access (CDMA) gsm(5) - Global System for Mobile communications (GSM) hdr(6) - High Data Rate (HDR) wcdma(7) - Wideband Code-Division Multiple-Access (WCDMA) gps(8) - Global Positioning System (GPS) lte(9) - Long Term Evolution (LTE)
I32 c3gCurrentNid	1.3.6.1.4.1.9.9.661.1.2.4.1.6	Integer32	read-write	Current Network Identification (NID), NID is a 16-bit numeric identifiers used by cellular systems. Value of '-1' indicates NID is 'Not Applicable'.
C3G c3gCurrentServiceType	1.3.6.1.4.1.9.9.661.1.1.1.5	C3gServiceCapability	read-only	This object indicates the current service type when service type changes.
I32 c3gCurrentSid	1.3.6.1.4.1.9.9.661.1.2.4.1.5	Integer32	read-write	Current System Identifier (SID), SID is a 15-bit numeric identifiers used by cellular systems to identify the home system of a cellular telephone and by the cellular telephone to determine its roaming status. Value of '-1' indicates SID is 'Not Applicable'.
STR c3gCurrentSystemTime	1.3.6.1.4.1.9.9.661.1.1.1.7	DisplayString	read-only	Cellular current system time received from base station.
NTF c3gEcIoAbateNotif	1.3.6.1.4.1.9.9.661.0.9			If Ec/Io goes above c3gEcIoAbateNotifThreshold and the service bit in c3gEcIoAbateNotifFlag is set, this notification will be generated. Object c3gNotifRadioService will indicate which service generates this notification and the associated Ec/Io will be reported in c3gNotifEcIo. Please note that c3gNotifEcIo is used to indicate the Ec/Io value that triggers the notification, user should go to the corresponding radio table to get the current Ec/Io value.
C3G c3gEcIoAbateNotifFlag	1.3.6.1.4.1.9.9.661.1.1.1.28	C3gServiceCapability	read-write	This object is the flag bitmap to control the generation of notification c3gEcIoAbateNotif. Each bit represents a service as defined in C3gServiceCapability, set the bit value to 1 to enable (and 0 to disable) the generation of notification c3gEcIoAbateNotif for that service. The default value of this object is all bits are 0.
C3G c3gEcIoAbateNotifThreshold	1.3.6.1.4.1.9.9.661.1.1.1.16	C3gEcIo	read-write	The threshold value that if EcIo goes above the threshold and the service bit in c3gEcIoAbateNotifFlag is set, the c3gEcIoAbateNotif notification for that service will be sent. The absolute value of c3gEcIoAbateNotifThreshold should be less than or equal to the absolute value of c3gEcIoOnsetNotifThreshold (\|c3gEcIoAbateNotifThreshold\| <= \|c3gEcIoOnsetNotifThreshold\|). e.g. setting c3gEcIoOnsetNotifThreshold to -15 dB and then setting c3gEcIoAbateNotifThreshold to -10 dB is not allowed and will be rejected.
NTF c3gEcIoOnsetNotif	1.3.6.1.4.1.9.9.661.0.8			If Ec/Io goes below c3gEcIoOnsetNotifThreshold and the service bit in c3gEcIoOnsetNotifFlag is set, this notification will be generated. Object c3gNotifRadioService will indicate which service generates this notification and the associated Ec/Io will be reported in c3gNotifEcIo. Please note that c3gNotifEcIo is used to indicate the Ec/Io value that triggers the notification, user should go to the corresponding radio table to get the current Ec/Io value.
C3G c3gEcIoOnsetNotifFlag	1.3.6.1.4.1.9.9.661.1.1.1.27	C3gServiceCapability	read-write	This object is the flag bitmap to control the generation of notification c3gEcIoOnsetNotif. Each bit represents a service as defined in C3gServiceCapability, set the bit value to 1 to enable (and 0 to disable) the generation of notification c3gEcIoOnsetNotif for that service. The default value of this object is all bits are 0.
C3G c3gEcIoOnsetNotifThreshold	1.3.6.1.4.1.9.9.661.1.1.1.15	C3gEcIo	read-write	The EcIo onset threshold value. If EcIo goes below the threshold and the service bit in c3gEcIoOnsetNotifFlag is set, the c3gEcIoOnsetNotif notification for that service will be sent. The absolute value of c3gEcIoAbateNotifThreshold should be less than or equal to the absolute value of c3gEcIoOnsetNotifThreshold (\|c3gEcIoAbateNotifThreshold\| <= \|c3gEcIoOnsetNotifThreshold\|). e.g. setting c3gEcIoAbateNotifThreshold to -15 dB and then setting c3gEcIoOnsetNotifThreshold to -10 dB is not allowed and will be rejected.
STR c3gEsn	1.3.6.1.4.1.9.9.661.1.2.3.1.1	DisplayString	read-only	This object indicates Electronic Serial Number (ESN).
U32 c3gEvDoBandClass	1.3.6.1.4.1.9.9.661.1.2.6.4.1.1	Unsigned32	read-only	This object contains EV-DO band class.
STR c3gFsn	1.3.6.1.4.1.9.9.661.1.3.1.1.5	DisplayString	read-only	Forward Sequence Number (FSN), a message acknowledgement method using sequence number in the forward direction.
T/F c3gGpsState	1.3.6.1.4.1.9.9.661.1.1.1.31	TruthValue	read-write	This object is used to determine or enable/disable the GPS state.
U32 c3gGsmChannelNumber	1.3.6.1.4.1.9.9.661.1.3.4.1.1.4	Unsigned32	read-only	Channel number to which the modem is attached. This is only applicable in 3G technology mode. Refer CISCO-WAN-CELL-EXT-MIB for the LTE uplink and downlink channel values
INT c3gGsmChv1	1.3.6.1.4.1.9.9.661.1.3.5.1.1.1	INTEGER	read-write	Card Holder Verification 1 (CHV1), if enabled, the PIN will be verified, if disabled, the PIN will not be verified.
STR c3gGsmCountry	1.3.6.1.4.1.9.9.661.1.3.2.1.8	DisplayString	read-only	Country code. Country code string is given by the base station.
INT c3gGsmCurrentBand	1.3.6.1.4.1.9.9.661.1.3.4.1.1.3	INTEGER	read-only	GPRS/UMTS/LTE band to which the modem is attached. Refer CISCO-WAN-CELL-EXT-MIB for LTE band number when in LTE mode.
U32 c3gGsmCurrentCellId	1.3.6.1.4.1.9.9.661.1.3.2.1.13	Unsigned32	read-only	Cell Identifier of current cell. Cell ID is given by the base station.
U32 c3gGsmCurrentPrimaryScramblingCode	1.3.6.1.4.1.9.9.661.1.3.2.1.14	Unsigned32	read-only	Primary scrambling code of current cell. The primary scrambling code is typically identified through symbol-by-symbol correlation over the CPICH (Common Pilot Channel) with all codes within the code group, after the primary scrambling code has been identified, the Primary CCPCH can be detected and the system and cell specific BCH information can be read.
INT c3gGsmCurrentRoamingStatus	1.3.6.1.4.1.9.9.661.1.3.2.1.6	INTEGER	read-only	This object indicates whether the modem is in the home network or is roaming.
INT c3gGsmCurrentService	1.3.6.1.4.1.9.9.661.1.3.2.1.4	INTEGER	read-only	Current service type: unknown(1) - service type is unknown invalid(2) - no service circuitSwitched(3) - circuit switched service packetSwitched(4) - packet switched service combined(5) - combination of circuit and packet switched service
INT c3gGsmCurrentServiceError	1.3.6.1.4.1.9.9.661.1.3.2.1.3	INTEGER	read-only	Current service error: unknown(1) - Unknown none(2) - None imsiUnknownInHlr(3) - IMSI unknown in HLR (Home Location Register) illegalMs(4) - Illegal MS (Mobile Station) imsiUnknownInVlr(5) - IMSI unknown in VLR (Visitor Location Register) imeiNotAccepted(6) - IMEI not accepted illegalMe(7) - Illegal ME (Mobile Entity) gprsServNotAllowed(8) - GPRS services not allowed gprsNonGprsServNotAllow(9) - GPRS and non-GPRS services not allowed msIdentUnknown(10) - MS identity unknown implicitlyDetached(11) - Implicitly detached plmnNotAllowed(12) - PLMN not allowed lacNotAllowed(13) - LAC not allowed roamingNotAllowed(14) - Roaming not allowed gprsServNotAllowInPlmn(15) - GPRS services not allowed in this PLMN noSuitableCellInLa(16) - No suitable cells in LA (Location Area) mscTempNotReachable(17) - MSC (Mobile Switching Center) temporarily not reachable networkFailure(18) - Network failure macFailure(19) - MAC failure synchFailure(20) - Synch failure congestion(21) - Congestion gsmAuthenNotAccept(22) - GSM/LTE Authentication not accepted servOptionNotSupport(23) - Service option not supported reqServOptionNotSub(24) - Requested service option not subscribed servOptionOutOfOrder(25) - Service option out of order callCannotIdentified(26) - Call cannot be identified noPdpContextActivated(27) - No PDP context activated invalidMandatInfo(28) - Invalid mandatory info unpsecProtErr(29) - Unspecified protocol error
INT c3gGsmCurrentServiceStatus	1.3.6.1.4.1.9.9.661.1.3.2.1.2	INTEGER	read-only	Current Service Status: unknown(1) - current service status is unknown noService(2) - no service normal(3) - service status is normal emergencyOnly(4) - emergency service only
c3gGsmHistoryEntry	1.3.6.1.4.1.9.9.661.1.3.4.3.1		not-accessible	An entry (conceptual row) in the c3gGsmHistoryTable.
OCT c3gGsmHistoryRssiPerHour	1.3.6.1.4.1.9.9.661.1.3.4.3.1.3	OCTET STRING	read-only	Per-hour weakest RSSI value history. This object contains a per-hour history of weakest RSSI values for the last 72 hours. The octet in the string is the weakest RSSI value measured in an hour interval.
OCT c3gGsmHistoryRssiPerMinute	1.3.6.1.4.1.9.9.661.1.3.4.3.1.2	OCTET STRING	read-only	Per-minute weakest RSSI value history. This object contains a per-minute history of weakest RSSI values for the last 60 minutes. The octet in the string is the weakest RSSI value measured in a minute interval.
OCT c3gGsmHistoryRssiPerSecond	1.3.6.1.4.1.9.9.661.1.3.4.3.1.1	OCTET STRING	read-only	Per-second RSSI history. This object contains a per-second history of RSSI values for the last 60 seconds.
c3gGsmHistoryTable	1.3.6.1.4.1.9.9.661.1.3.4.3		not-accessible	Cellular 3G GSM/4G-LTE RSSI history table. The history of RSSI are carried in an octet of string. Each octet in the octet string has a value from 0 to 150 and the 255 value is reserved to indicate an uninitialized (Invalid) value. The format of the octet string with n octets is as following: [ octet 0 is latest, octet 1 is latest-1, . . octet n-2 is oldest-1, octet n-1 is oldest ] To convert the provided value into dBm the following formula should be used: dBm = (-1)*value;
c3gGsmIdentityEntry	1.3.6.1.4.1.9.9.661.1.3.1.1		not-accessible	An entry (conceptual row) in the c3gGsmIdentityTable.
c3gGsmIdentityTable	1.3.6.1.4.1.9.9.661.1.3.1		not-accessible	.
U32 c3gGsmLac	1.3.6.1.4.1.9.9.661.1.3.2.1.1	Unsigned32	read-only	Location Area Code (LAC), also called as Tracking Area Code (TAC) in LTE standard. LAC/TAC is given by the base station.
I32 c3gGsmMcc	1.3.6.1.4.1.9.9.661.1.3.2.1.10	Integer32	read-write	Mobile Country Code (MCC). Value of '-1' indicates MCC is 'Not Applicable'.
C3G c3gGsmMinGprsQosDelay	1.3.6.1.4.1.9.9.661.1.3.3.7.1.2	C3gGprsQosDelay	read-create	Minimum GPRS QoS delay classes.
c3gGsmMinGprsQosEntry	1.3.6.1.4.1.9.9.661.1.3.3.7.1		not-accessible	An entry (conceptual row) in the c3gGsmMinGprsQosTable.
C3G c3gGsmMinGprsQosMeanRate	1.3.6.1.4.1.9.9.661.1.3.3.7.1.5	C3gGprsQosMeanRate	read-create	Minimum GPRS QoS mean rate.
C3G c3gGsmMinGprsQosPeakRate	1.3.6.1.4.1.9.9.661.1.3.3.7.1.4	C3gGprsQosPeakRate	read-create	Minimum GPRS QoS peak rate.
C3G c3gGsmMinGprsQosPrecedence	1.3.6.1.4.1.9.9.661.1.3.3.7.1.1	C3gGprsQosPrecedence	read-create	Minimum GPRS QoS precedence.
C3G c3gGsmMinGprsQosReliability	1.3.6.1.4.1.9.9.661.1.3.3.7.1.3	C3gGprsQosReliability	read-create	Minimum GPRS QoS reliability.
ROW c3gGsmMinGprsQosRowStatus	1.3.6.1.4.1.9.9.661.1.3.3.7.1.6	RowStatus	read-create	The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table.
c3gGsmMinGprsQosTable	1.3.6.1.4.1.9.9.661.1.3.3.7		not-accessible	Minimum acceptable GPRS QoS table. This table contains minimum acceptable GPRS QoS parameters which is checked by the MT (Mobile Termination) against the negotiated profile returned in the Activate PDP Context Accept message. The minimum acceptable GPRS QoS profile is optional. This table is applicable only in 3G technology mode.
C3G c3gGsmMinUmtsQosBer	1.3.6.1.4.1.9.9.661.1.3.3.4.1.10	C3gUmtsQosBer	read-create	Minimum UMTS residual bit error ratio.
U32 c3gGsmMinUmtsQosDelay	1.3.6.1.4.1.9.9.661.1.3.3.4.1.11	Unsigned32	read-create	Minimum UMTS transfer delay in ms, the valid range is between 1 and 4000 ms. Value of '0' indicates the QoS delay is unspecified.
c3gGsmMinUmtsQosEntry	1.3.6.1.4.1.9.9.661.1.3.3.4.1		not-accessible	An entry (conceptual row) in the c3gGsmMinUmtsQosTable.
C3G c3gGsmMinUmtsQosErroneousSdu	1.3.6.1.4.1.9.9.661.1.3.3.4.1.7	C3gUmtsQosErroneousSdu	read-create	Minimum UMTS QoS Delivery of Erroneous SDU.
C3G c3gGsmMinUmtsQosGuaDownLinkBitRate	1.3.6.1.4.1.9.9.661.1.3.3.4.1.5	C3gUmtsQosLinkBitRate	read-create	Minimum UMTS QoS guaranteed downlink bit rate.
C3G c3gGsmMinUmtsQosGuaUpLinkBitRate	1.3.6.1.4.1.9.9.661.1.3.3.4.1.4	C3gUmtsQosLinkBitRate	read-create	Minimum UMTS QoS guaranteed uplink bit rate.
C3G c3gGsmMinUmtsQosMaxDownLinkBitRate	1.3.6.1.4.1.9.9.661.1.3.3.4.1.3	C3gUmtsQosLinkBitRate	read-create	Minimum UMTS QoS maximum downlink bit rate.
U32 c3gGsmMinUmtsQosMaxSduSize	1.3.6.1.4.1.9.9.661.1.3.3.4.1.8	Unsigned32	read-create	Minimum UMTS maximum SDU size, the valid range is between 1 and 1520 bytes. Value of '0' indicates the maximum SDU size is unspecified.
C3G c3gGsmMinUmtsQosMaxUpLinkBitRate	1.3.6.1.4.1.9.9.661.1.3.3.4.1.2	C3gUmtsQosLinkBitRate	read-create	Minimum UMTS QoS maximum uplink bit rate.
C3G c3gGsmMinUmtsQosOrder	1.3.6.1.4.1.9.9.661.1.3.3.4.1.6	C3gUmtsQosOrder	read-create	Minimum UMTS QoS deliver order.
C3G c3gGsmMinUmtsQosPriority	1.3.6.1.4.1.9.9.661.1.3.3.4.1.12	C3gUmtsQosPriority	read-create	Minimum UMTS QoS traffic handling priority.
ROW c3gGsmMinUmtsQosRowStatus	1.3.6.1.4.1.9.9.661.1.3.3.4.1.15	RowStatus	read-create	The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table.
C3G c3gGsmMinUmtsQosSer	1.3.6.1.4.1.9.9.661.1.3.3.4.1.9	C3gUmtsQosSer	read-create	Minimum UMTS QoS SDU error ratio.
C3G c3gGsmMinUmtsQosSignalIndication	1.3.6.1.4.1.9.9.661.1.3.3.4.1.14	C3gUmtsQosSignalIndication	read-create	Minimum UMTS QoS signalling indication.
C3G c3gGsmMinUmtsQosSrcStatDescriptor	1.3.6.1.4.1.9.9.661.1.3.3.4.1.13	C3gUmtsQosSrcStatDescriptor	read-create	Minimum UMTS QoS source statistics descriptor.
c3gGsmMinUmtsQosTable	1.3.6.1.4.1.9.9.661.1.3.3.4		not-accessible	Minimum acceptable UMTS QoS table. This table contains minimum acceptable UMTS QoS parameters which is checked by the MT (Mobile Termination) against the negotiated profile returned in the Activate PDP Context Accept message. The minimum acceptable UMTS QoS profile is optional. This table is applicable only in 3G technology mode.
C3G c3gGsmMinUmtsQosTrafficClass	1.3.6.1.4.1.9.9.661.1.3.3.4.1.1	C3gUmtsQosTrafficClass	read-create	Minimum UMTS QoS traffic classes.
I32 c3gGsmMnc	1.3.6.1.4.1.9.9.661.1.3.2.1.11	Integer32	read-write	Mobile Network Code (MNC). Value of '-1' indicates MNC is 'Not Applicable'.
C3G c3gGsmNearbyCellEcIoMeasurement	1.3.6.1.4.1.9.9.661.1.3.4.2.1.4	C3gEcIo	read-only	Nearby cell Ec/Io measurement.
c3gGsmNearbyCellEntry	1.3.6.1.4.1.9.9.661.1.3.4.2.1		not-accessible	An entry (conceptual row) in the c3gGsmNearbyCellTable.
I32 c3gGsmNearbyCellIndex	1.3.6.1.4.1.9.9.661.1.3.4.2.1.1	Integer32	not-accessible	Nearby cell index, combined with entPhysicalIndex to access the Nearby cell table c3gGsmNearbyCellTable.
U32 c3gGsmNearbyCellPrimaryScramblingCode	1.3.6.1.4.1.9.9.661.1.3.4.2.1.2	Unsigned32	read-only	Nearby cell primary scrambling code.
I32 c3gGsmNearbyCellRscp	1.3.6.1.4.1.9.9.661.1.3.4.2.1.3	Integer32	read-only	Nearby cell Received Signal Code Power (RSCP).
c3gGsmNearbyCellTable	1.3.6.1.4.1.9.9.661.1.3.4.2		not-accessible	Cellular GSM/4G-LTE nearby cell table. Object c3gGsmNumberOfNearbyCell indicates the total number of nearby cell in this table.
C3G c3gGsmNegoGprsQosDelay	1.3.6.1.4.1.9.9.661.1.3.3.8.1.2	C3gGprsQosDelay	read-only	Negotiated GPRS QoS delay classes.
c3gGsmNegoGprsQosEntry	1.3.6.1.4.1.9.9.661.1.3.3.8.1		not-accessible	An entry (conceptual row) in the c3gGsmNegoGprsQosTable.
C3G c3gGsmNegoGprsQosMeanRate	1.3.6.1.4.1.9.9.661.1.3.3.8.1.5	C3gGprsQosMeanRate	read-only	Negotiated GPRS QoS mean rate.
C3G c3gGsmNegoGprsQosPeakRate	1.3.6.1.4.1.9.9.661.1.3.3.8.1.4	C3gGprsQosPeakRate	read-only	Negotiated GPRS QoS peak rate.
C3G c3gGsmNegoGprsQosPrecedence	1.3.6.1.4.1.9.9.661.1.3.3.8.1.1	C3gGprsQosPrecedence	read-only	Negotiated GPRS QoS precedence.
C3G c3gGsmNegoGprsQosReliability	1.3.6.1.4.1.9.9.661.1.3.3.8.1.3	C3gGprsQosReliability	read-only	Negotiated GPRS QoS reliability.
c3gGsmNegoGprsQosTable	1.3.6.1.4.1.9.9.661.1.3.3.8		not-accessible	Negotiated GPRS QoS table. This table contains negotiated GPRS QoS parameters returned in the Activate PDP Context Accept message. The objects in this table are valid only if the value of object c3gGsmPacketSessionStatus defined in c3gGsmPacketSessionTable is 'active'. This table is applicable only in 3G technology mode.
C3G c3gGsmNegoUmtsQosBer	1.3.6.1.4.1.9.9.661.1.3.3.5.1.10	C3gUmtsQosBer	read-only	Negotiated UMTS QoS residual bit error ratio.
U32 c3gGsmNegoUmtsQosDelay	1.3.6.1.4.1.9.9.661.1.3.3.5.1.11	Unsigned32	read-only	Negotiated UMTS QoS transfer delay in ms, the valid range is between 1 and 4000 ms. Value of '0' indicates the QoS delay is subscribed.
c3gGsmNegoUmtsQosEntry	1.3.6.1.4.1.9.9.661.1.3.3.5.1		not-accessible	An entry (conceptual row) in the c3gGsmNegoUmtsQosTable.
C3G c3gGsmNegoUmtsQosErroneousSdu	1.3.6.1.4.1.9.9.661.1.3.3.5.1.7	C3gUmtsQosErroneousSdu	read-only	Negotiated UMTS QoS Delivery of Erroneous SDU.
C3G c3gGsmNegoUmtsQosGuaDownLinkBitRate	1.3.6.1.4.1.9.9.661.1.3.3.5.1.5	C3gUmtsQosLinkBitRate	read-only	Negotiated UMTS QoS guaranteed downlink bit rate.
C3G c3gGsmNegoUmtsQosGuaUpLinkBitRate	1.3.6.1.4.1.9.9.661.1.3.3.5.1.4	C3gUmtsQosLinkBitRate	read-only	Negotiated UMTS QoS guaranteed uplink bit rate.
C3G c3gGsmNegoUmtsQosMaxDownLinkBitRate	1.3.6.1.4.1.9.9.661.1.3.3.5.1.3	C3gUmtsQosLinkBitRate	read-only	Negotiated UMTS QoS maximum downlink bit rate.
U32 c3gGsmNegoUmtsQosMaxSduSize	1.3.6.1.4.1.9.9.661.1.3.3.5.1.8	Unsigned32	read-only	Negotiated UMTS QoS maximum SDU size, the valid range is between 1 and 1520 bytes. Value of '0' indicates the maximum SDU size is subscribed.
C3G c3gGsmNegoUmtsQosMaxUpLinkBitRate	1.3.6.1.4.1.9.9.661.1.3.3.5.1.2	C3gUmtsQosLinkBitRate	read-only	Negotiated UMTS QoS maximum uplink bit rate.
C3G c3gGsmNegoUmtsQosOrder	1.3.6.1.4.1.9.9.661.1.3.3.5.1.6	C3gUmtsQosOrder	read-only	Negotiated UMTS QoS deliver order.
C3G c3gGsmNegoUmtsQosPriority	1.3.6.1.4.1.9.9.661.1.3.3.5.1.12	C3gUmtsQosPriority	read-only	Negotiated UMTS QoS traffic handling priority.
C3G c3gGsmNegoUmtsQosSer	1.3.6.1.4.1.9.9.661.1.3.3.5.1.9	C3gUmtsQosSer	read-only	Negotiated UMTS QoS SDU error ratio.
C3G c3gGsmNegoUmtsQosSignalIndication	1.3.6.1.4.1.9.9.661.1.3.3.5.1.14	C3gUmtsQosSignalIndication	read-only	Negotiated UMTS QoS signalling indication.
C3G c3gGsmNegoUmtsQosSrcStatDescriptor	1.3.6.1.4.1.9.9.661.1.3.3.5.1.13	C3gUmtsQosSrcStatDescriptor	read-only	Negotiated UMTS QoS source statistics descriptor.
c3gGsmNegoUmtsQosTable	1.3.6.1.4.1.9.9.661.1.3.3.5		not-accessible	Negotiated UMTS QoS table. This table contains negotiated UMTS QoS parameters returned in the Activate PDP Context Accept message. The objects in this table are valid only if the value of object c3gGsmPacketSessionStatus defined in c3gGsmPacketSessionTable is 'active'. This table is applicable only in 3G technology mode.
C3G c3gGsmNegoUmtsQosTrafficClass	1.3.6.1.4.1.9.9.661.1.3.3.5.1.1	C3gUmtsQosTrafficClass	read-only	Negotiated UMTS QoS traffic classes.
STR c3gGsmNetwork	1.3.6.1.4.1.9.9.661.1.3.2.1.9	DisplayString	read-only	Network code. Network Code string is given by the base station.
c3gGsmNetworkEntry	1.3.6.1.4.1.9.9.661.1.3.2.1		not-accessible	An entry (conceptual row) in the c3gGsmNetworkTable.
INT c3gGsmNetworkSelectionMode	1.3.6.1.4.1.9.9.661.1.3.2.1.7	INTEGER	read-write	Network selection mode. Can be manual selection mode or automatic selection mode. Set to automatic by default.
c3gGsmNetworkTable	1.3.6.1.4.1.9.9.661.1.3.2		not-accessible	Cellular GSM Network table. This table is applicable in both 3G and 4G-LTE technology mode
U32 c3gGsmNumberOfNearbyCell	1.3.6.1.4.1.9.9.661.1.3.4.1.1.5	Unsigned32	read-only	This object indicates the current total number of nearby cell in the c3gGsmNearbyCellTable. User can poll this object to get the total number of nearby cell before polling c3gGsmNearbyCellTable.
U32 c3gGsmNumberOfRetriesRemaining	1.3.6.1.4.1.9.9.661.1.3.5.1.1.4	Unsigned32	read-only	Indicates the number of attempts remaining in case the SIM is locked. If the number of retries becomes zero, the SIM is blocked and becomes unusable.
INT c3gGsmPacketService	1.3.6.1.4.1.9.9.661.1.3.2.1.5	INTEGER	read-only	Packet Service type: unknown(1) - service type is unknown. none(2) - no service. gprs(3) - General Packet Radio Service (GPRS). edge(4) - Enhanced Data rates for GSM Evolution (EDGE). umtsWcdma(5) - Universal Mobile Telecommunications System (UMTS) / Wideband Code-Division Multiple-Access (W-CDMA). hsdpa(6) - High-Speed Downlink Packet Access (HSDPA) hsdpa(7) - High-Speed Uplink Packet Access (HSUPA) hspa(8) - High-Speed Packet Access (HSPA) hspaPlus(9) - High-Speed Packet Access (HSPA) Plus lte(10) - Long Term Evolution
c3gGsmPacketSessionEntry	1.3.6.1.4.1.9.9.661.1.3.3.2.1		not-accessible	An entry (conceptual row) in the c3gGsmPacketSessionTable.
INT c3gGsmPacketSessionStatus	1.3.6.1.4.1.9.9.661.1.3.3.2.1.1	INTEGER	read-only	This object indicates PDP session status of the profile. This is active when the call is established and PDP contextr has become active.
c3gGsmPacketSessionTable	1.3.6.1.4.1.9.9.661.1.3.3.2		not-accessible	Cellular 3G GSM packet session table. This table is applicable in only 3G technology mode. Refer CISCO-WAN-CELL-EXT-MIB when in 4G-LTE mode.
STR c3gGsmPdpAddress	1.3.6.1.4.1.9.9.661.1.3.3.2.1.3	DisplayString	read-only	Current session PDP context/EPS Bearer address. PDP type is obtained from c3gGsmPdpType.
c3gGsmPdpProfile	1.3.6.1.4.1.9.9.661.1.3.3
STR c3gGsmPdpProfileAddr	1.3.6.1.4.1.9.9.661.1.3.3.1.1.3	DisplayString	read-create	Configured PDP/EPS Bearer address. PDP type is defined in c3gGsmPdpProfileType.
STR c3gGsmPdpProfileApn	1.3.6.1.4.1.9.9.661.1.3.3.1.1.4	DisplayString	read-create	This object indicates profile Access Point Name (APN). This information is provided by the service provider.
INT c3gGsmPdpProfileAuthenType	1.3.6.1.4.1.9.9.661.1.3.3.1.1.5	INTEGER	read-create	This object indicates PDP authentication type supported. CHAP and PAP are supported in GSM. The type of authentication to be used is provided by the service provider.
c3gGsmPdpProfileEntry	1.3.6.1.4.1.9.9.661.1.3.3.1.1		not-accessible	An entry (conceptual row) in the c3gGsmPdpProfileTable.
I32 c3gGsmPdpProfileIndex	1.3.6.1.4.1.9.9.661.1.3.3.1.1.1	Integer32	not-accessible	Profile index, combined with entPhysicalIndex to access profile table.
STR c3gGsmPdpProfilePassword	1.3.6.1.4.1.9.9.661.1.3.3.1.1.7	DisplayString	read-create	This object indicates the password to be used for PDP authentication. This information is provided by the service provider.
ROW c3gGsmPdpProfileRowStatus	1.3.6.1.4.1.9.9.661.1.3.3.1.1.8	RowStatus	read-create	The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table.
c3gGsmPdpProfileTable	1.3.6.1.4.1.9.9.661.1.3.3.1		not-accessible	Cellular GSM PDP profiles table. Cellular device contains multiple profile entries which can be used to establish cellular data connections (PDP contexts). Users can choose any of available PDP profiles to establish data connections. Data connections are described in c3gGsmPacketSessionTable. This table is applicable in only 3G technology mode. Refer CISCO-WAN-CELL-EXT-MIB when in 4G-LTE mode.
C3G c3gGsmPdpProfileType	1.3.6.1.4.1.9.9.661.1.3.3.1.1.2	C3gPdpType	read-create	This object indicates configured Packet Data Protocol (PDP) type.
STR c3gGsmPdpProfileUsername	1.3.6.1.4.1.9.9.661.1.3.3.1.1.6	DisplayString	read-create	This object indicates the username to be used for PDP authentication. This information is provided by the service provider.
C3G c3gGsmPdpType	1.3.6.1.4.1.9.9.661.1.3.3.2.1.2	C3gPdpType	read-only	This object indicates current session PDP type.
STR c3gGsmPlmnAbbr	1.3.6.1.4.1.9.9.661.1.3.2.1.17	DisplayString	read-only	PLMN abbreviated number.
INT c3gGsmPlmnSelection	1.3.6.1.4.1.9.9.661.1.3.2.1.15	INTEGER	read-write	Public Land Mobile Network (PLMN) selection. Can be manual selection mode or automatic selection mode. Set to automatic by default.
U32 c3gGsmRac	1.3.6.1.4.1.9.9.661.1.3.2.1.12	Unsigned32	read-only	Routing Area Code (RAC). RAC is given by the base station.
c3gGsmRadio	1.3.6.1.4.1.9.9.661.1.3.4
c3gGsmRadioEntry	1.3.6.1.4.1.9.9.661.1.3.4.1.1		not-accessible	An entry (conceptual row) in the c3gGsmRadioTable.
c3gGsmRadioTable	1.3.6.1.4.1.9.9.661.1.3.4.1		not-accessible	Cellular 3G GSM/4G-LTE radio table.
STR c3gGsmRegPlmn	1.3.6.1.4.1.9.9.661.1.3.2.1.16	DisplayString	read-only	Registered PLMN.
C3G c3gGsmReqGprsQosDelay	1.3.6.1.4.1.9.9.661.1.3.3.6.1.2	C3gGprsQosDelay	read-create	Request GPRS QoS delay classes.
c3gGsmReqGprsQosEntry	1.3.6.1.4.1.9.9.661.1.3.3.6.1		not-accessible	An entry (conceptual row) in the c3gGsmReqGprsQosTable.
C3G c3gGsmReqGprsQosMeanRate	1.3.6.1.4.1.9.9.661.1.3.3.6.1.5	C3gGprsQosMeanRate	read-create	Request GPRS QoS mean rate.
C3G c3gGsmReqGprsQosPeakRate	1.3.6.1.4.1.9.9.661.1.3.3.6.1.4	C3gGprsQosPeakRate	read-create	Request GPRS QoS peak rate.
C3G c3gGsmReqGprsQosPrecedence	1.3.6.1.4.1.9.9.661.1.3.3.6.1.1	C3gGprsQosPrecedence	read-create	Request GPRS QoS precedence.
C3G c3gGsmReqGprsQosReliability	1.3.6.1.4.1.9.9.661.1.3.3.6.1.3	C3gGprsQosReliability	read-create	Request GPRS QoS reliability.
ROW c3gGsmReqGprsQosRowStatus	1.3.6.1.4.1.9.9.661.1.3.3.6.1.6	RowStatus	read-create	The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table.
c3gGsmReqGprsQosTable	1.3.6.1.4.1.9.9.661.1.3.3.6		not-accessible	Requested GPRS QoS parameters table. This table contains GPRS QoS parameters requested by modem to the cellular network via PDP Context Request message. The requested GPRS QoS profile is optional. This table is applicable only in 3G technology mode.
C3G c3gGsmReqUmtsQosBer	1.3.6.1.4.1.9.9.661.1.3.3.3.1.11	C3gUmtsQosBer	read-create	Request UMTS QoS residual bit error ratio.
U32 c3gGsmReqUmtsQosDelay	1.3.6.1.4.1.9.9.661.1.3.3.3.1.12	Unsigned32	read-create	Request UMTS QoS transfer delay in ms, the valid range is between 1 and 4000 ms. Value of '0' indicates the QoS delay is unspecified.
c3gGsmReqUmtsQosEntry	1.3.6.1.4.1.9.9.661.1.3.3.3.1		not-accessible	An entry (conceptual row) in the c3gGsmReqUmtsQosTable.
C3G c3gGsmReqUmtsQosErroneousSdu	1.3.6.1.4.1.9.9.661.1.3.3.3.1.8	C3gUmtsQosErroneousSdu	read-create	Request UMTS QoS Delivery of Erroneous SDU.
C3G c3gGsmReqUmtsQosGuaDownLinkBitRate	1.3.6.1.4.1.9.9.661.1.3.3.3.1.6	C3gUmtsQosLinkBitRate	read-create	Request UMTS QoS guaranteed downlink bit rate.
C3G c3gGsmReqUmtsQosGuaUpLinkBitRate	1.3.6.1.4.1.9.9.661.1.3.3.3.1.5	C3gUmtsQosLinkBitRate	read-create	Request UMTS QoS guaranteed uplink bit rate.
C3G c3gGsmReqUmtsQosMaxDownLinkBitRate	1.3.6.1.4.1.9.9.661.1.3.3.3.1.4	C3gUmtsQosLinkBitRate	read-create	Request UMTS QoS maximum downlink bit rate.
U32 c3gGsmReqUmtsQosMaxSduSize	1.3.6.1.4.1.9.9.661.1.3.3.3.1.9	Unsigned32	read-create	Request UMTS QoS maximum SDU size, the valid range is between 1 and 1520 bytes. Value of '0' indicates the maximum SDU size is unspecified.
C3G c3gGsmReqUmtsQosMaxUpLinkBitRate	1.3.6.1.4.1.9.9.661.1.3.3.3.1.3	C3gUmtsQosLinkBitRate	read-create	Request UMTS QoS maximum uplink bit rate.
C3G c3gGsmReqUmtsQosOrder	1.3.6.1.4.1.9.9.661.1.3.3.3.1.7	C3gUmtsQosOrder	read-create	Request UMTS QoS deliver order.
C3G c3gGsmReqUmtsQosPriority	1.3.6.1.4.1.9.9.661.1.3.3.3.1.13	C3gUmtsQosPriority	read-create	Request UMTS QoS traffic handling priority.
ROW c3gGsmReqUmtsQosRowStatus	1.3.6.1.4.1.9.9.661.1.3.3.3.1.16	RowStatus	read-create	The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table.
C3G c3gGsmReqUmtsQosSer	1.3.6.1.4.1.9.9.661.1.3.3.3.1.10	C3gUmtsQosSer	read-create	Request UMTS QoS SDU error ratio.
C3G c3gGsmReqUmtsQosSignalIndication	1.3.6.1.4.1.9.9.661.1.3.3.3.1.15	C3gUmtsQosSignalIndication	read-create	Request UMTS QoS signalling indication.
C3G c3gGsmReqUmtsQosSrcStatDescriptor	1.3.6.1.4.1.9.9.661.1.3.3.3.1.14	C3gUmtsQosSrcStatDescriptor	read-create	Request UMTS QoS source statistics descriptor.
c3gGsmReqUmtsQosTable	1.3.6.1.4.1.9.9.661.1.3.3.3		not-accessible	Requested UMTS QoS parameters table. This table contains UMTS QoS parameters requested by modem to the cellular network via PDP Context Activation Request message. The requested UMTS QoS profile is optional. This table is applicable only in 3G technology mode.
C3G c3gGsmReqUmtsQosTrafficClass	1.3.6.1.4.1.9.9.661.1.3.3.3.1.2	C3gUmtsQosTrafficClass	read-create	Request UMTS QoS traffic classes.
INT c3gGsmRoamingPreference	1.3.6.1.4.1.9.9.661.1.3.1.1.7	INTEGER	read-write	This object indicates the roaming preference.
c3gGsmSecurity	1.3.6.1.4.1.9.9.661.1.3.5
c3gGsmSecurityEntry	1.3.6.1.4.1.9.9.661.1.3.5.1.1		not-accessible	An entry (conceptual row) in the c3gGsmSecurityTable.
c3gGsmSecurityTable	1.3.6.1.4.1.9.9.661.1.3.5.1		not-accessible	Cellular 3G GSM/4G-LTE security table.
STR c3gGsmServiceProvider	1.3.6.1.4.1.9.9.661.1.3.2.1.18	DisplayString	read-only	Service provider.
INT c3gGsmSimStatus	1.3.6.1.4.1.9.9.661.1.3.5.1.1.2	INTEGER	read-only	SIM status. Indicates whether the SIM is present or removed from the SIM socket, and its current status.
INT c3gGsmSimUserOperationRequired	1.3.6.1.4.1.9.9.661.1.3.5.1.1.3	INTEGER	read-only	If the SIM is protected (for example, because of CHV1 enabled), it will indicate the type of user operation required.
C64 c3gGsmTotalByteReceived	1.3.6.1.4.1.9.9.661.1.3.2.1.20	Counter64	read-only	Total number of bytes received for all calls. It is the total number of bytes received by modem, not to be confused with the number of bytes received from the interface.
C64 c3gGsmTotalByteTransmitted	1.3.6.1.4.1.9.9.661.1.3.2.1.19	Counter64	read-only	Total number of bytes transmitted for all calls. It is the total number of bytes transmitted by modem, not to be confused with the number of bytes transmitted through the interface.
INT c3gHdrAtState	1.3.6.1.4.1.9.9.661.1.2.2.1.2	INTEGER	read-only	High Data Rate (HDR) Access Terminal (AT) state.
U32 c3gHdrColorCode	1.3.6.1.4.1.9.9.661.1.2.6.3.1.6	Unsigned32	read-only	Color code of the sector.
INT c3gHdrDdtmPreference	1.3.6.1.4.1.9.9.661.1.2.1.1.4	INTEGER	read-write	HDR Data Dedicated Transmission Mode (DDTM) preference: unknown(1) - DDTM preference is unknown off(2) - DDTM preference set to OFF on(3) - DDTM preference set to ON noChange(4) - DDTM preference is no change
U32 c3gHdrDrc	1.3.6.1.4.1.9.9.661.1.2.2.1.11	Unsigned32	read-only	High Data Rate (HDR) Data Rate Control (DRC). AT provides requests for data transmissions by sending a Data Rate Control, DRC, message via a specific channel referred to as the DRC channel.
U32 c3gHdrDrcCover	1.3.6.1.4.1.9.9.661.1.2.2.1.12	Unsigned32	read-only	HDR DRC cover. The DRC cover is a coding applied to identify the sector from which the data is to be transmitted. In one embodiment, the DRC cover is a Walsh code applied to the DRC value, wherein a unique code corresponds to each sector in the Active Set of the AT.
INT c3gHdrRri	1.3.6.1.4.1.9.9.661.1.2.2.1.13	INTEGER	read-only	HDR Rate Request Indicator (RRI). RRI provides the structure of a frame currently being transmitted when frames are transmitted at different rates. Services at different rates are reliably provided by the RRI: unknown(1) - RRI unknown pilotOnly(2) - pilot channel only rri9dot6kbps(3) - RRI is 9.6 Kbit/s rri19dot2kbps(4) - RRI is 19.2 Kbit/s rri38dot4kbps(5) - RRI is 38.4 Kbit/s rri76dot8kbps(6) - RRI is 76.8 Kbit/s rri153dot6kbps(7) - RRI is 153.6 Kbit/s
U32 c3gHdrSessionDuration	1.3.6.1.4.1.9.9.661.1.2.2.1.7	Unsigned32	read-only	HDR connection session duration. It is the duration between c3gHdrSessionStart and c3gHdrSessionEnd.
U32 c3gHdrSessionEnd	1.3.6.1.4.1.9.9.661.1.2.2.1.9	Unsigned32	read-only	HDR connection session ending time.
U32 c3gHdrSessionStart	1.3.6.1.4.1.9.9.661.1.2.2.1.8	Unsigned32	read-only	HDR connection session starting time.
INT c3gHdrSessionState	1.3.6.1.4.1.9.9.661.1.2.2.1.3	INTEGER	read-only	High Data Rate (HDR) session state.
IP c3gHomeAddr	1.3.6.1.4.1.9.9.661.1.2.5.2.1.10	InetAddress	read-write	A unicast routable address assigned to a Mobile Node, used as the permanent address of the Mobile Node.
IPt c3gHomeAddrType	1.3.6.1.4.1.9.9.661.1.2.5.2.1.9	InetAddressType	read-write	A value that represents the type of the IP Address stored in the object c3gHomeAddr.
STR c3gIccId	1.3.6.1.4.1.9.9.661.1.3.1.1.3	DisplayString	read-only	This object indicates the Integrated Circuit Card ID (ICCID). The ICCID is defined by the ITU-T recommendation E.118. ICCIDs are stored in the SIM cards and are also engraved or printed on the SIM card body during a process called personalization.
STR c3gImei	1.3.6.1.4.1.9.9.661.1.3.1.1.2	DisplayString	read-only	International Mobile Equipment Identifier (IMEI), a unique 15 or 17 digit code used to identify an individual mobile station to a GSM, UMTS or LTE network.
STR c3gImsi	1.3.6.1.4.1.9.9.661.1.3.1.1.1	DisplayString	read-only	International Mobile Subscriber Identifier (IMSI), a unique 15-digit code used to identify an individual user on a GSM/LTE network.
INT c3gLbsFixtype	1.3.6.1.4.1.9.9.661.1.4.1.1.1.10	INTEGER	read-only	The type of location fix in Location Base service. none - default case, while LBS is not enabled. twoDimension - 2D location fix. threeDimension - 3D location fix.
U32 c3gLbsHeading	1.3.6.1.4.1.9.9.661.1.4.1.1.1.15	Unsigned32	read-only	The compass direction toward which the GPS receiver is (or should be) moving.
I32 c3gLbsHeight	1.3.6.1.4.1.9.9.661.1.4.1.1.1.12	Integer32	read-only	This object indicates the GPS height parameter returned by the GPS device while performing location fix.
T/F c3gLbsHeightValid	1.3.6.1.4.1.9.9.661.1.4.1.1.1.11	TruthValue	read-only	This object indicates whether the height returned by the GPS device is valid during location fix.
U32 c3gLbsHepe	1.3.6.1.4.1.9.9.661.1.4.1.1.1.18	Unsigned32	read-only	Horizontal Estimated Position Error returned by the GPS satellite for current position of the GPS device.
STR c3gLbsLatitude	1.3.6.1.4.1.9.9.661.1.4.1.1.1.4	SnmpAdminString	read-only	Location base service Latitude.
INT c3gLbsLocFixError	1.3.6.1.4.1.9.9.661.1.4.1.1.1.3	INTEGER	read-only	Location base service fix error code.
U32 c3gLbsLocUncertaintyA	1.3.6.1.4.1.9.9.661.1.4.1.1.1.8	Unsigned32	read-only	GPS Uncertainty parameter A, value in meters for the Uncertainty info returned by the GPS device while doing a location fix.
U32 c3gLbsLocUncertaintyAngle	1.3.6.1.4.1.9.9.661.1.4.1.1.1.7	Unsigned32	read-only	GPS Uncertainty parameter Angle, in degrees for the Uncertainty info returned by the GPS device while doing a location fix.
U32 c3gLbsLocUncertaintyPos	1.3.6.1.4.1.9.9.661.1.4.1.1.1.9	Unsigned32	read-only	GPS Uncertainty parameter position, value in meters for the Uncertainty info returned by the GPS device while doing a location fix.
U32 c3gLbsLocUncertaintyVertical	1.3.6.1.4.1.9.9.661.1.4.1.1.1.13	Unsigned32	read-only	GPS parameter vertical velocity parameter returned by the GPS device while performing location fix.
STR c3gLbsLongitude	1.3.6.1.4.1.9.9.661.1.4.1.1.1.5	SnmpAdminString	read-only	Location base service longitude.
INT c3gLbsModeSelected	1.3.6.1.4.1.9.9.661.1.4.1.1.1.1	INTEGER	read-only	Mode of Location base service selected. unKnown - mode selection unkown standAlone - Standalone mode msBased - MS-Based mode msAssist - MS-Assist mode reserved - reserved for future use
G32 c3gLbsNumSatellites	1.3.6.1.4.1.9.9.661.1.4.1.1.1.19	Gauge32	read-only	Number of GPS satellites in vision to the modem while GPS tracking is on.
INT c3gLbsState	1.3.6.1.4.1.9.9.661.1.4.1.1.1.2	INTEGER	read-only	Location base service state. gpsDisabled - GPS is disabled gpsEnabled - GPS is enabled gpsLocError - GPS encounters error gpsAcquiring - GPS is acquiring fix
STR c3gLbsTimeStamp	1.3.6.1.4.1.9.9.661.1.4.1.1.1.6	SnmpAdminString	read-only	Location base service timestamp.
U32 c3gLbsVelocityHorizontal	1.3.6.1.4.1.9.9.661.1.4.1.1.1.16	Unsigned32	read-only	Horizontal Velocity in meters per second the GPS device is heading. This is the value returned by the GPS satellite relative to the last horizontal location of the GPS device. If at Time X satellite sees the location of GPS device is L1 and then at Time Y satellite sees the location is L2 then speed is (L2 - L1) / ( Y - X).
T/F c3gLbsVelocityValid	1.3.6.1.4.1.9.9.661.1.4.1.1.1.14	TruthValue	read-only	This object indicates whether the Velocity value returned by the GPS device is valid.
U32 c3gLbsVelocityVertical	1.3.6.1.4.1.9.9.661.1.4.1.1.1.17	Unsigned32	read-only	Vertical Velocity in meters per second the GPS device is heading. This is the value returned by the GPS satellite relative to the last vertical location of the GPS device. If at Time X satellite sees the location of GPS device is L1 and then at Time Y satellite sees the location is L2 then speed is (L2 - L1) / ( Y - X).
STR c3gMdn	1.3.6.1.4.1.9.9.661.1.2.3.1.6	DisplayString	read-write	Mobile Directory Number (MDN), a dialable number assigned to a wireless phone.
U32 c3gMnAaaSpi	1.3.6.1.4.1.9.9.661.1.2.5.2.1.7	Unsigned32	read-write	Mobile Node (MN) Authentication Authorization Accounting (AAA) Security Parameter Index (SPI).
INT c3gMnAaaSs	1.3.6.1.4.1.9.9.661.1.2.5.2.1.6	INTEGER	read-write	Mobile Node (MN) Authentication Authorization Accounting (AAA) Shared Secret (SS) setting: set(1) - shared secret is set notSet(2) - shared secret is not set
U32 c3gMnHaSpi	1.3.6.1.4.1.9.9.661.1.2.5.2.1.5	Unsigned32	read-write	Mobile Node (MN) Home Agent (HA) Security Parameter Index (SPI).
INT c3gMnHaSs	1.3.6.1.4.1.9.9.661.1.2.5.2.1.4	INTEGER	read-write	Mobile Node (MN) Home Agent (HA) Shared Secret (SS) setting: set(1) - shared secret is set notSet(2) - shared secret is not set
I32 c3gMobileIpErrorCode	1.3.6.1.4.1.9.9.661.1.2.2.1.14	Integer32	read-only	Mobile IP error code (please refer to RFC 2002).
INT c3gModemActivationStatus	1.3.6.1.4.1.9.9.661.1.2.3.1.2	INTEGER	read-only	Modem activation status.
NTF c3gModemDownNotif	1.3.6.1.4.1.9.9.661.0.2			This is the notification that the modem has not been detected by host interface, or has been disconnected from host interface. Users can enable or disable the generation of this notification by using object c3gModemDownNotifEnabled.
T/F c3gModemDownNotifEnabled	1.3.6.1.4.1.9.9.661.1.1.1.21	TruthValue	read-write	This object is used to enable/disable the generation of modem down notification c3gModemDownNotif.
INT c3gModemReset	1.3.6.1.4.1.9.9.661.1.1.1.19	INTEGER	read-write	This object is used to reset or power-cycle the modem.
INT c3gModemState	1.3.6.1.4.1.9.9.661.1.1.1.3	INTEGER	read-only	Cellular modem state, up(2) indicates modem can be detected and down(3) indicates modem can not be detected.
INT c3gModemStatus	1.3.6.1.4.1.9.9.661.1.3.1.1.6	INTEGER	read-only	Modem status: unknown(1) - modem status is unknown offLine(2) - modem is off line onLine(3) - modem is on line lowPowerMode(4) - modem is in the low power mode
NTF c3gModemTemperAbateNotif	1.3.6.1.4.1.9.9.661.0.11			If modem temperature goes below c3gModemTemperAbateNotifThreshold and the value of c3gModemTemperAbateNotifEnabled is 'true', this notification will be generated and the current value of c3gModemTemperature will be included in this notification.
T/F c3gModemTemperAbateNotifEnabled	1.3.6.1.4.1.9.9.661.1.1.1.30	TruthValue	read-write	This object is used to enable/disable the generation of c3gModemTemperAbateNotif notification.
C3G c3gModemTemperAbateNotifThreshold	1.3.6.1.4.1.9.9.661.1.1.1.18	C3gTemperature	read-write	The modem temperature abate threshold value. If modem temperature goes below the threshold and the value of c3gModemTemperAbateNotifEnabled is 'true', the c3gModemTemperAbateNotif notification will be sent. The value of c3gModemTemperAbateNotifThreshold should be less than or equal to the value of c3gModemTemperOnsetNotifThreshold. e.g. setting c3gModemTemperAbateNotifThreshold to 50 degree Celsius and then setting c3gModemTemperOnsetNotifThreshold to 40 degree Celsius is not allowed and will be rejected.
NTF c3gModemTemperAbateRecoveryNotif	1.3.6.1.4.1.9.9.661.0.13			This trap is generated as a recovery notification for c3gModemTemperAbateNotif.This trap is generated when the current value of c3gModemTemperature goes above c3gModemTemperAbateNotifThreshold once it has generated the c3gModemTemperAbateNotif and the value of c3gModemTemperAbateNotifEnabled is 'true' c3gModemTemperature contains the current value of modem temperature
C3G c3gModemTemperature	1.3.6.1.4.1.9.9.661.1.1.1.12	C3gTemperature	read-only	The modem temperature.
NTF c3gModemTemperOnsetNotif	1.3.6.1.4.1.9.9.661.0.10			If modem temperature goes above c3gModemTemperOnsetNotifThreshold and the value of c3gModemTemperOnsetNotifEnabled is 'true', this notification will be generated and the current value of c3gModemTemperature will be included in this notification.
T/F c3gModemTemperOnsetNotifEnabled	1.3.6.1.4.1.9.9.661.1.1.1.29	TruthValue	read-write	This object is used to enable/disable the generation of c3gModemTemperOnsetNotif notification.
C3G c3gModemTemperOnsetNotifThreshold	1.3.6.1.4.1.9.9.661.1.1.1.17	C3gTemperature	read-write	The modem temperature onset threshold value. If modem temperature goes above the threshold and the value of c3gModemTemperOnsetNotifEnabled is 'true', the c3gModemTemperOnsetNotif notification will be sent. The value of c3gModemTemperAbateNotifThreshold should be less than or equal to the value of c3gModemTemperOnsetNotifThreshold. e.g. setting c3gModemTemperAbateNotifThreshold to 50 degree Celsius and then setting c3gModemTemperOnsetNotifThreshold to 40 degree Celsius is not allowed and will be rejected.
NTF c3gModemTemperOnsetRecoveryNotif	1.3.6.1.4.1.9.9.661.0.12			This trap is generated as a recovery notification for c3gModemTemperOnsetNotif.This trap is generated when the current value of c3gModemTemperature goes below c3gModemTemperOnsetNotifThreshold once it has generated the c3gModemTemperOnsetNotif and the value of c3gModemTemperOnsetNotifEnabled is 'true'. c3gModemTemperature contains the current value of modem temperature.
NTF c3gModemUpNotif	1.3.6.1.4.1.9.9.661.0.1			This is the notification that the modem has been detected by host interface. Users can enable or disable the generation of this notification by using object c3gModemUpNotifEnabled.
T/F c3gModemUpNotifEnabled	1.3.6.1.4.1.9.9.661.1.1.1.20	TruthValue	read-write	This object is used to enable/disable the generation of modem up notification c3gModemUpNotif.
STR c3gMsid	1.3.6.1.4.1.9.9.661.1.2.3.1.7	DisplayString	read-write	Mobile Station Identifier (MSID), MSID is utilized to distinguish the mobile station being programmed from other mobile stations during messaging and paging processes, including the downloading of programming information to the mobile station.
STR c3gMsisdn	1.3.6.1.4.1.9.9.661.1.3.1.1.4	DisplayString	read-write	This object indicates the Mobile Subscriber Integrated Services Digital Network Number (MSISDN). It is a number uniquely identifying a subscription in a GSM, UMTS or LTE mobile network. It represents the telephone number to the SIM card in a mobile/cellular phone.
STR c3gMsl	1.3.6.1.4.1.9.9.661.1.2.3.1.8	DisplayString	read-write	Mobile Subscriber Lock (MSL).
STR c3gNai	1.3.6.1.4.1.9.9.661.1.2.5.2.1.2	DisplayString	read-write	Network Access Identifier (NAI). NAI is required to identify the mobile user and the network the mobile user intended to access. The NAI is provided by the mobile node to the dialed ISP during PPP authentication.
NTF c3gNetworkChangedNotif	1.3.6.1.4.1.9.9.661.0.4			Notification for network change event. Objects c3gCurrentSid, c3gCurrentNid, c3gGsmMcc, c3gGsmMnc and c3gRoamingStatus will be included in the notification. Users can enable or disable the generation of this notification by using object c3gNetworkChangedNotifEnabled.
T/F c3gNetworkChangedNotifEnabled	1.3.6.1.4.1.9.9.661.1.1.1.23	TruthValue	read-write	This object is used to enable/disable the generation of network changed notification c3gNetworkChangedNotif.
C3G c3gNotifEcIo	1.3.6.1.4.1.9.9.661.1.1.1.11	C3gEcIo	read-only	This object is used as one of the var-bind object when notification for Ec/Io is generated. The relevant Ec/Io will be copied into c3gNotifEcIo which corresponds to the service indicated in c3gNotifRadioService object. This object will reflect the value of one of the following objects: c3gCurrent1xRttEcIo, c3gCurrentEvDoEcIo and c3gCurrentGsmEcIo. User should not use this object to get the current Ec/Io value as this object is used to indicate the Ec/Io value that triggers c3gEcIoOnsetNotif or c3gEcIoAbateNotif notification.
C3G c3gNotifRadioService	1.3.6.1.4.1.9.9.661.1.1.1.9	C3gServiceCapability	read-only	This object is used as one of the var-bind object when notification for RSSI or Ec/Io is generated. This object indicates which service generates the notification.
C3G c3gNotifRssi	1.3.6.1.4.1.9.9.661.1.1.1.10	C3gRssi	read-only	This object is used as one of the var-bind object when notification for RSSI is generated. The relevant RSSI will be copied into c3gNotifRssi which corresponds to the service indicated in c3gNotifRadioService object. This object will reflect the value of one of the following objects: c3gCurrent1xRttRssi, c3gCurrentEvDoRssi and c3gCurrentGsmRssi. User should not use this object to get the current RSSI value as this object is used to indicate the RSSI value that triggers c3gRssiOnsetNotif or c3gRssiAbateNotif notification.
U32 c3gNumberOfDataProfileConfigurable	1.3.6.1.4.1.9.9.661.1.2.5.1.1.1	Unsigned32	read-write	The number of data profiles configurable.
STR c3gOutgoingCallNumber	1.3.6.1.4.1.9.9.661.1.2.2.1.1	DisplayString	read-only	Phone number of outgoing call.
U32 c3gPnOffset	1.3.6.1.4.1.9.9.661.1.2.6.3.1.7	Unsigned32	read-only	PN offset. PN offset is a time offset from the beginning of the well-known pseudo-random noise sequence that is used to spread the signal from the base station.
C3G c3gPreviousServiceType	1.3.6.1.4.1.9.9.661.1.1.1.4	C3gServiceCapability	read-only	This object indicates the previous service type when service type changes.
IP c3gPriHaAddr	1.3.6.1.4.1.9.9.661.1.2.5.2.1.12	InetAddress	read-write	The primary home agent address.
IPt c3gPriHaAddrType	1.3.6.1.4.1.9.9.661.1.2.5.2.1.11	InetAddressType	read-write	A value that represents the type of the IP Address stored in the object c3gPriHaAddr.
U32 c3gPrlVersion	1.3.6.1.4.1.9.9.661.1.2.3.1.5	Unsigned32	read-only	Preferred Roaming List (PRL) version.
U32 c3gRati	1.3.6.1.4.1.9.9.661.1.2.2.1.6	Unsigned32	read-only	Random Access Terminal Identifier (RATI). AT transmits a UATI request message to the ANC using the RATI to make a UATI allocation request.
INT c3gReverseTunnelPreference	1.3.6.1.4.1.9.9.661.1.2.5.2.1.8	INTEGER	read-write	Reverse tunnel preference.
INT c3gRoamingStatus	1.3.6.1.4.1.9.9.661.1.1.1.6	INTEGER	read-only	Cellular current roaming status.
NTF c3gRssiAbateNotif	1.3.6.1.4.1.9.9.661.0.7			If RSSI goes above c3gRssiAbateNotifThreshold and the service bit in c3gRssiAbateNotifFlag is set, this notification will be generated. Object c3gNotifRadioService will indicate which service generates this notification and the associated RSSI will be reported in c3gNotifRssi. Please note that c3gNotifRssi is used to indicate the RSSI value that triggers the notification, user should go to the corresponding radio table to get the current RSSI value.
C3G c3gRssiAbateNotifFlag	1.3.6.1.4.1.9.9.661.1.1.1.26	C3gServiceCapability	read-write	This object is the flag bitmap to control the generation of notification c3gRssiAbateNotif. Each bit represents a service as defined in C3gServiceCapability, set the bit value to 1 to enable (and 0 to disable) the generation of notification c3gRssiAbateNotif for that service. The default value of this object is all bits are 0.
C3G c3gRssiAbateNotifThreshold	1.3.6.1.4.1.9.9.661.1.1.1.14	C3gRssi	read-write	The RSSI abate threshold value. If RSSI goes above the threshold and the service bit in c3gRssiAbateNotifFlag is set, the c3gRssiAbateNotif notification for that service will be sent. The absolute value of c3gRssiAbateNotifThreshold should be less than or equal to the absolute value of c3gRssiOnsetNotifThreshold (\|c3gRssiAbateNotifThreshold\| <= \|c3gRssiOnsetNotifThreshold\|). e.g. setting c3gRssiAbateNotifThreshold to -115 dBm and then setting c3gRssiOnsetNotifThreshold to -110 dBm is not allowed and will be rejected.
NTF c3gRssiOnsetNotif	1.3.6.1.4.1.9.9.661.0.6			If RSSI goes below c3gRssiOnsetNotifThreshold and the service bit in c3gRssiOnsetNotifFlag is set, this notification will be generated. Object c3gNotifRadioService will indicate which service generates this notification and the associated RSSI will be reported in c3gNotifRssi. Please note that c3gNotifRssi is used to indicate the RSSI value that triggers the notification, user should go to the corresponding radio table to get the current RSSI value.
C3G c3gRssiOnsetNotifFlag	1.3.6.1.4.1.9.9.661.1.1.1.25	C3gServiceCapability	read-write	This object is the flag bitmap to control the generation of notification c3gRssiOnsetNotif. Each bit represents a service as defined in C3gServiceCapability, set the bit value to 1 to enable (and 0 to disable) the generation of notification c3gRssiOnsetNotif for that service. The default value of this object is all bits are 0.
C3G c3gRssiOnsetNotifThreshold	1.3.6.1.4.1.9.9.661.1.1.1.13	C3gRssi	read-write	The RSSI onset threshold value. If RSSI goes below the threshold and the service bit in c3gRssiOnsetNotifFlag is set, the c3gRssiOnsetNotif notification for that service will be sent. The absolute value of c3gRssiAbateNotifThreshold should be less than or equal to the absolute value of c3gRssiOnsetNotifThreshold (\|c3gRssiAbateNotifThreshold\| <= \|c3gRssiOnsetNotifThreshold\|). e.g. setting c3gRssiAbateNotifThreshold to -115 dBm and then setting c3gRssiOnsetNotifThreshold to -110 dBm is not allowed and will be rejected.
I32 c3gRxDiversityGainControl	1.3.6.1.4.1.9.9.661.1.2.6.3.1.9	Integer32	read-only	Received diversity for the modem. value of '-1' indicates the received diversity is unavailable.
I32 c3gRxMainGainControl	1.3.6.1.4.1.9.9.661.1.2.6.3.1.8	Integer32	read-only	Received main gain control for the modem. value of '-1' indicates the received main gain control is unavailable.
IP c3gSecHaAddr	1.3.6.1.4.1.9.9.661.1.2.5.2.1.14	InetAddress	read-write	The secondary home agent address.
IPt c3gSecHaAddrType	1.3.6.1.4.1.9.9.661.1.2.5.2.1.13	InetAddressType	read-write	A value that represents the type of the IP Address stored in the object c3gSecHaAddr.
STR c3gSectorId	1.3.6.1.4.1.9.9.661.1.2.6.3.1.4	DisplayString	read-only	Sector ID of the base station to which the modem is attached.
NTF c3gServiceChangedNotif	1.3.6.1.4.1.9.9.661.0.3			Notification for service change event. Objects c3gPreviousServiceType and c3gCurrentServiceType will be included in the notification. Users can enable or disable the generation of this notification by using object c3gServiceChangedNotifEnabled.
T/F c3gServiceChangedNotifEnabled	1.3.6.1.4.1.9.9.661.1.1.1.22	TruthValue	read-write	This object is used to enable/disable the generation of service changed notification c3gServiceChangedNotif.
STR c3gServingBaseStationLatitude	1.3.6.1.4.1.9.9.661.1.2.4.1.11	DisplayString	read-only	Latitude of the serving base station.
STR c3gServingBaseStationLongitude	1.3.6.1.4.1.9.9.661.1.2.4.1.10	DisplayString	read-only	Longitude of the serving base station.
STR c3gSipPassword	1.3.6.1.4.1.9.9.661.1.2.4.1.9	DisplayString	read-write	Simple IP (SIP) password.
STR c3gSipUsername	1.3.6.1.4.1.9.9.661.1.2.4.1.8	DisplayString	read-write	Simple IP (SIP) user name.
STR c3gSmsArchiveUrl	1.3.6.1.4.1.9.9.661.1.5.1.1.1.8	SnmpAdminString	read-only	URL of the sms archive directory on the ftp server. The url will be of this format ftp://x.y.z.k/user/dirname
c3gSmsCommonEntry	1.3.6.1.4.1.9.9.661.1.5.1.1.1		not-accessible	An entry contains counters for the SMS messages received, placed, errored and archived on CDMA, GSM or LTE based modems.
c3gSmsCommonTable	1.3.6.1.4.1.9.9.661.1.5.1.1		not-accessible	This table contains Cellular SMS management MIB objects.
G32 c3gSmsInSmsArchiveCount	1.3.6.1.4.1.9.9.661.1.5.1.1.1.6	Gauge32	read-only	Number of successful archive of Incoming SMS messages since router reload. Each SMS message occupies x bytes of space. So if the incoming message is huge, then it is archived as multiple of x bytes but still called as one SMS message. This is the difference between c3gSmsInSmsArchiveCount and c3gSmsInSmsArchived.
G32 c3gSmsInSmsArchived	1.3.6.1.4.1.9.9.661.1.5.1.1.1.17	Gauge32	read-only	Number of Incoming SMS messages that are successfully archived since router reload.
G32 c3gSmsInSmsArchiveErrorCount	1.3.6.1.4.1.9.9.661.1.5.1.1.1.7	Gauge32	read-only	The number of Incoming SMS messages that could not be archived since device was reloaded.
C32 c3gSmsInSmsCallBack	1.3.6.1.4.1.9.9.661.1.5.1.1.1.13	Counter32	read-only	Number of incoming SMS messages that triggered callback.
C32 c3gSmsInSmsCount	1.3.6.1.4.1.9.9.661.1.5.1.1.1.10	Counter32	read-only	Number of SMS messages which have been received successfully and stored in router. These SMS's are a mirror copy of SMS stored in Modem or SIM
C32 c3gSmsInSmsDeleted	1.3.6.1.4.1.9.9.661.1.5.1.1.1.11	Counter32	read-only	Number of SMS messages which have been deleted since router boot up. This does not include SMS messages that are already archived.
C64 c3gSmsInSmsStorageMax	1.3.6.1.4.1.9.9.661.1.5.1.1.1.12	Counter64	read-only	Number of SMS message records space allocated in the router's DRAM to store Incoming SMS messages.
G32 c3gSmsInSmsStorageUnused	1.3.6.1.4.1.9.9.661.1.5.1.1.1.5	Gauge32	read-only	The number of SMS messages record space left unused in the Incoming SMS message storage. This is equal to c3gSmsInSmsStorageMax - c3gSmsInSmsStorageUsed.
G32 c3gSmsInSmsStorageUsed	1.3.6.1.4.1.9.9.661.1.5.1.1.1.4	Gauge32	read-only	Number of SMS message records space used in the Incoming SMS message storage. One standard SMS message (cdma or gsm) occupies 1 unit of record storage space. A big SMS message can span 'n' sms record space but still be called as 1 SMS message. Storage used can be greater than or equal to total number of Incoming SMS received.
G32 c3gSmsOutSmsArchiveCount	1.3.6.1.4.1.9.9.661.1.5.1.1.1.15	Gauge32	read-only	Number of successfull archive of outgoing SMS messages since router reload.
G32 c3gSmsOutSmsArchiveErrorCount	1.3.6.1.4.1.9.9.661.1.5.1.1.1.16	Gauge32	read-only	Number of failed archive of outgoing SMS messages since router reload.
C32 c3gSmsOutSmsCount	1.3.6.1.4.1.9.9.661.1.5.1.1.1.2	Counter32	read-only	Number of SMS messages which have been sent successfully.
C32 c3gSmsOutSmsErrorCount	1.3.6.1.4.1.9.9.661.1.5.1.1.1.3	Counter32	read-only	Number of SMS message that could not be sent.
G32 c3gSmsOutSmsPendingCount	1.3.6.1.4.1.9.9.661.1.5.1.1.1.14	Gauge32	read-only	Number of outgoing SMS messages that are in pending queue of the router.
INT c3gSmsOutSmsStatus	1.3.6.1.4.1.9.9.661.1.5.1.1.1.9	INTEGER	read-only	Status of the last send operation of outgoing SMS message to the network.
T/F c3gSmsServiceAvailable	1.3.6.1.4.1.9.9.661.1.5.1.1.1.1	TruthValue	read-only	This object indicates the availability of SMS Service.
INT c3gStandard	1.3.6.1.4.1.9.9.661.1.1.1.1	INTEGER	read-only	Cellular Standard: GSM (Global System for Mobile communications, 3GPP), CDMA (Code Division Multiple Access, 3GPP-2). GSM standard also include 4G-LTE technology mode
U32 c3gSubnetMask	1.3.6.1.4.1.9.9.661.1.2.6.3.1.5	Unsigned32	read-only	Subnet mask of the sector, not to be confused with the IP subnet mask.
I32 c3gTxGainAdjust	1.3.6.1.4.1.9.9.661.1.2.6.3.1.11	Integer32	read-only	Transmit gain adjust.
I32 c3gTxTotalPower	1.3.6.1.4.1.9.9.661.1.2.6.3.1.10	Integer32	read-only	Transmit total power.
STR c3gUati	1.3.6.1.4.1.9.9.661.1.2.2.1.4	DisplayString	read-only	Unicast Access Terminal Identifier (UATI), AT seeking access to the 1 times EV-DO system receives a UATI allocated from the system after setting up a radio traffic channel with a base station.
c3gWanCdma	1.3.6.1.4.1.9.9.661.1.2
c3gWanCommonEntry	1.3.6.1.4.1.9.9.661.1.1.1		not-accessible	An entry (conceptual row) in the c3gWanCommonTable.
c3gWanCommonTable	1.3.6.1.4.1.9.9.661.1.1		not-accessible	Cellular common objects table which is technology independent.
c3gWanGsm	1.3.6.1.4.1.9.9.661.1.3
c3gWanLbs	1.3.6.1.4.1.9.9.661.1.4
c3gWanLbsCommon	1.3.6.1.4.1.9.9.661.1.4.1
c3gWanLbsCommonEntry	1.3.6.1.4.1.9.9.661.1.4.1.1.1		not-accessible	This entry contains information about the Cellular Location Based service variables returned by the wireless modem.
c3gWanLbsCommonTable	1.3.6.1.4.1.9.9.661.1.4.1.1		not-accessible	This table contains information about the Cellular Location Based service feature. This GPS data is provided by the wireless modem upon GPS configuration.
I32 c3gWanLbsSatelliteAzimuth	1.3.6.1.4.1.9.9.661.1.4.2.1.1.4	Integer32	read-only	Azimuth of the current satellite in context referenced by the Satellite InfoIndex. Azimuth is the degree of rotation of the satellites dish on its vertical plane.
I32 c3gWanLbsSatelliteElevation	1.3.6.1.4.1.9.9.661.1.4.2.1.1.3	Integer32	read-only	Angle of Elevation between the GPS antenna pointing direction, directly towards the satellite, and the local horizontal plane. It is the up-down angle
c3gWanLbsSatelliteInfo	1.3.6.1.4.1.9.9.661.1.4.2
c3gWanLbsSatelliteInfoEntry	1.3.6.1.4.1.9.9.661.1.4.2.1.1		not-accessible	This table provides information about each satellite's elevation, azimuth, Signal to Noise ratio (SNR) and its reference number local to the router.
I32 c3gWanLbsSatelliteInfoIndex	1.3.6.1.4.1.9.9.661.1.4.2.1.1.1	Integer32	not-accessible	An index that is assigned to each satellite under a modem and in combination with entPhysicalIndex uniquely identify it. This index is assigned arbitrarily by the engine and is not saved over reboots.
ROW c3gWanLbsSatelliteInfoRowStatus	1.3.6.1.4.1.9.9.661.1.4.2.1.1.7	RowStatus	read-create	The status of this conceptual row. This object is used to manage creation, modification and deletion of rows in this table.
I32 c3gWanLbsSatelliteInfoSignalNoiseRatio	1.3.6.1.4.1.9.9.661.1.4.2.1.1.5	Integer32	read-only	Signal to Noise Ratio(SNR) of received GPS signal. SNR is refered to as the signal strength in GPS standards.
c3gWanLbsSatelliteInfoTable	1.3.6.1.4.1.9.9.661.1.4.2.1		not-accessible	This table provides information on each satellite that is visible to the modem during the location fix. These satellites guide the device to acquire a 2D or 3D location fix.
I32 c3gWanLbsSatelliteNumber	1.3.6.1.4.1.9.9.661.1.4.2.1.1.2	Integer32	read-only	Each Satellite is assigned a unique number within this device.This object can be used to locate a particular satellite under a modem.
T/F c3gWanLbsSatelliteUsed	1.3.6.1.4.1.9.9.661.1.4.2.1.1.6	TruthValue	read-only	Is this satellite in line of sight to the modem used in calculating the GPS location?
c3gWanSms	1.3.6.1.4.1.9.9.661.1.5.1
c3gWanSmsCommon	1.3.6.1.4.1.9.9.661.1.5
ciscoWan3gMIB	1.3.6.1.4.1.9.9.661			This MIB module provides network management support for Cisco cellular 3G and 4G LTE WAN products. * ABBREVIATIONS, ACRONYMS, AND SYMBOLS * 1xRTT - 1 times Radio Transmission Technology. 3G - Third generation of mobile phones standards and technologies. 4G - Fourth generation of mobile phones standards and technologies Azimuth - Angle of rotation of a satellite Dish. BER - Bit Error Ratio. BS - Base Station. CDMA - Code Division Multiple Access. dB - decibel. dBm - power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). CnS - Control and Status proprietary protocol for managing the control and status of the modem. Ec/Io - ratio of received pilot energy, Ec, to total received energy or the total power spectral density, Io. EDGE - Enhanced Data rate for GSM Evolution. EPS - Evolved Packet System EVDO - EVolution Data Optimized. FDD - Frequency Division Duplexing GPRS - General Packet Radio Service. GSM - Global System for Mobile communications. GPS - Global Positioning System. HSDPA - High Speed Downlink Packet Access. HSPA - High Speed Packet Access. HSUPA - High Speed Uplink Packet Access. LBS - Location Based Service. LTE - Long Term Evolution MT - Mobile Termination. PDP - Packet Data Protocol. PLMN - Public Land Mobile Network. QoS - Quality of Service. RSSI - Received Signal Strength Indication. SDU - Service Data Unit. SER - SDU Error Ratio. SIM - Subscriber Identity Module. SMS - Short Messaging Service. SNR - Signal to Noise Ratio. TDD - Time Division Duplexing UMTS - Universal Mobile Telecommunication System. WCDMA - Wideband Code Division Multiple Access.
ciscoWan3gMIBCdmaObjectGroup	1.3.6.1.4.1.9.9.661.2.2.2			A collection of objects for Cellular 3G CDMA.
ciscoWan3gMIBCommonObjectGroup	1.3.6.1.4.1.9.9.661.2.2.1			A collection of common objects for Cellular interface.
ciscoWan3gMIBCompliance	1.3.6.1.4.1.9.9.661.2.1.1			This is a default module-compliance containing default object groups.
ciscoWan3gMIBCompliance1	1.3.6.1.4.1.9.9.661.2.1.2			The compliance statement for the CISCO-WAN-3G-MIB.
ciscoWan3gMIBCompliance1Rev1	1.3.6.1.4.1.9.9.661.2.1.4			The compliance statement for the CISCO-WAN-3G-MIB.
ciscoWan3gMIBComplianceRev1	1.3.6.1.4.1.9.9.661.2.1.3			This is a default module-compliance containing default object groups.
ciscoWan3gMIBCompliances	1.3.6.1.4.1.9.9.661.2.1
ciscoWan3gMIBConform	1.3.6.1.4.1.9.9.661.2
ciscoWan3gMIBGroups	1.3.6.1.4.1.9.9.661.2.2
ciscoWan3gMIBGsmObjectGroup	1.3.6.1.4.1.9.9.661.2.2.3			A collection of objects for Cellular 3G GSM and LTE.
ciscoWan3gMIBLbsObjectGroup	1.3.6.1.4.1.9.9.661.2.2.5			A collection of common objects for Cellular Location Based Service.
ciscoWan3gMIBNotificationGroup	1.3.6.1.4.1.9.9.661.2.2.4			A collection of objects for Cellular WAN notifications. ciscoWan3gMIBNotificationGroup object is superseded by ciscoWan3gMIBNotificationGroupRev1.
ciscoWan3gMIBNotificationGroupRev1	1.3.6.1.4.1.9.9.661.2.2.7			A collection of objects for Cellular WAN notifications.
ciscoWan3gMIBNotifs	1.3.6.1.4.1.9.9.661.0
ciscoWan3gMIBObjects	1.3.6.1.4.1.9.9.661.1
ciscoWan3gMIBSmsObjectGroup	1.3.6.1.4.1.9.9.661.2.2.6			A collection of common objects for Cellular Short Messaging Service.

RFC description

Cisco MIB (RFC-based) for managing 3G and 4G LTE cellular WAN products and network interfaces. Supports monitoring of cellular connection status, signal strength, and technology parameters (CDMA, GSM, UMTS, HSPA, LTE).

Start monitoring Cisco routers with 3G/4G LTE WAN interface modules with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-WAN-3G-MIB