INTEL-LAN-ADAPTERS-MIB

All MIBs › INTEL-LAN-ADAPTERS-MIB

Organization: Intel Corp

Last Updated: 2012-10-31

Category: Network Interfaces, Vendor: Intel

Description: Intel LAN adapter MIB providing SNMP objects for monitoring Intel Ethernet network interface card statistics and configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is INTEL-LAN-ADAPTERS-MIB?

INTEL-LAN-ADAPTERS-MIB is an Intel-specific MIB for managing and monitoring Intel Ethernet LAN adapters (NICs) via SNMP, part of Intel's private enterprise MIB tree for its legacy network-adapter management agent. It exposes agent/adapter identity information (company, description, operatingSystem, mibVersionSupported, agentExtensionVersion) and a generic adapter attribute table listing each installed adapter's index, name, and type. It supports software/hardware status monitoring at the network-interface layer — the status object and genericAdaptersAttrTable let an operator confirm which adapters the host recognizes, cross-check agent and MIB version compatibility (mibVersion1-4-3, agentExtensionVersion), and detect if the host's adapter management agent is outdated or unresponsive relative to the installed hardware. It predates and stands independent of later IETF standards but conceptually parallels the standard IF-MIB for interface identification; it is primarily a legacy vendor-specific host-agent MIB. It's deployed on servers and workstations equipped with Intel Ethernet adapters, historically polled by NMS tools using Intel's SNMP agent, with INTEL-LAN-ADAPTERS-MIB SNMP monitoring providing adapter inventory and status checks.

IPNetwork Monitor allows you to monitor SNMP objects defined in INTEL-LAN-ADAPTERS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Server/workstation host fitted with Intel Ethernet LAN adapter(s)

Monitoring Examples

Walking genericAdaptersAttrTable/genericAdapterAttrEntry by adapterIndex returns each adapterName and adapterType, letting an admin confirm exactly which Intel NIC models are installed on a host. Cross-checking operatingSystem and mibVersionSupported against agentExtensionVersion helps catch a case where the SNMP agent's reported version is out of step with the installed adapter driver, a common cause of inconsistent monitoring data.

What Can Be Monitored

installed adapter name and type
adapter/agent MIB version
host operating system
adapter/agent status

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
PhysAddress
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using adapterRxPackets OID:

Select a Server/workstation host with Intel Ethernet LAN adapter (s) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type adapterRxPackets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the total number of packets received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
C32 adapterCollisions	1.3.6.1.4.1.343.2.7.2.2.1.3.1.10	Counter32	read-only	Total number of single collisions.
STR adapterDriverDate	1.3.6.1.4.1.343.2.7.2.2.1.2.1.5	DisplayString	read-only	Adapter driver creation date (in mm/dd/yy format).
STR adapterDriverInfo	1.3.6.1.4.1.343.2.7.2.2.1.2.1.2	DisplayString	read-only	Additional information about the adapter. Includes name of the NIC.
INT adapterDriverLoadStatus	1.3.6.1.4.1.343.2.7.2.2.1.1.1.4	INTEGER	read-only	Load status of the driver: -'loaded' if the driver is loaded on the NIC; 'notLoaded' otherwise. A status of 'notLoaded' means that the NIC is missing (via 'hotRemove') or the driver is not fully loaded for some reason.
STR adapterDriverName	1.3.6.1.4.1.343.2.7.2.2.1.2.1.1	DisplayString	read-only	Name of the adapter driver.
STR adapterDriverPath	1.3.6.1.4.1.343.2.7.2.2.1.2.1.4	DisplayString	read-only	Adapter driver path name.
STR adapterDriverSize	1.3.6.1.4.1.343.2.7.2.2.1.2.1.6	DisplayString	read-only	Adapter driver file size.
STR adapterDriverVersion	1.3.6.1.4.1.343.2.7.2.2.1.2.1.3	DisplayString	read-only	Adapter driver version number.
NUM adapterIndex	1.3.6.1.4.1.343.2.7.2.2.1.1.1.1	InterfaceIndex	read-only	A unique value, greater than or equal to zero, for each interface.
STR adapterIpAddress	1.3.6.1.4.1.343.2.7.2.2.1.2.1.7	DisplayString	read-only	Adapter IP address
STR adapterName	1.3.6.1.4.1.343.2.7.2.2.1.1.1.2	DisplayString	read-only	Name of the adapter interface. There is a unique name for each instance.
C32 adapterRxBytes	1.3.6.1.4.1.343.2.7.2.2.1.3.1.3	Counter32	read-only	Total number of bytes received.
C32 adapterRxDropped	1.3.6.1.4.1.343.2.7.2.2.1.3.1.7	Counter32	read-only	Total number of receive packets dropped due to overrun.
C32 adapterRxErrors	1.3.6.1.4.1.343.2.7.2.2.1.3.1.5	Counter32	read-only	Total number of packets received with errors (packets that failed to reach the protocol).
C32 adapterRxMulticast	1.3.6.1.4.1.343.2.7.2.2.1.3.1.9	Counter32	read-only	Total number of Multicast packets received.
C32 adapterRxPacketsEx	1.3.6.1.4.1.343.2.7.2.2.1.3.1.1	Counter32	read-only	Total number of packets received.
adaptersTables	1.3.6.1.4.1.343.2.7.2.2
C32 adapterTxBytes	1.3.6.1.4.1.343.2.7.2.2.1.3.1.4	Counter32	read-only	Total number of bytes transmitted.
C32 adapterTxDropped	1.3.6.1.4.1.343.2.7.2.2.1.3.1.8	Counter32	read-only	Total number of transmit packets dropped due to successive collisions.
C32 adapterTxErrors	1.3.6.1.4.1.343.2.7.2.2.1.3.1.6	Counter32	read-only	Total number of packets that failed to transmit.
C32 adapterTxPackets	1.3.6.1.4.1.343.2.7.2.2.1.3.1.2	Counter32	read-only	Total number of packets transmitted.
INT adapterType	1.3.6.1.4.1.343.2.7.2.2.1.1.1.3	INTEGER	read-only	Type of adapter (member, stand-alone, or virtual).
STR agentExtensionVersion	1.3.6.1.4.1.343.2.7.2.1.6	DisplayString	read-only	Version of the SNMP extension agent.
NTF ansAddedTrap	1.3.6.1.4.1.343.2.7.2.3.3.1.2			Team has been added.
ansAttrEntry	1.3.6.1.4.1.343.2.7.2.2.4.1.1		not-accessible	ANS attributes. There is one 'entry' for each team
ansAttrTable	1.3.6.1.4.1.343.2.7.2.2.4.1		not-accessible	ANS attributes.
ansAttrTables	1.3.6.1.4.1.343.2.7.2.2.4
ansEvents	1.3.6.1.4.1.343.2.7.2.3.3
ansGroup	1.3.6.1.4.1.3183.1.6.1			A collection of objects for ans group
ansGroups	1.3.6.1.4.1.3183.1.6
I32 ansId	1.3.6.1.4.1.343.2.7.2.2.4.1.1.1	Integer32	read-only	ANS ID. A unique value.
I32 ansMemberAnsId	1.3.6.1.4.1.343.2.7.2.2.5.1.1.2	Integer32	read-only	ID of the ANS to which the Adapter belongs.
ansMemberAttrEntry	1.3.6.1.4.1.343.2.7.2.2.5.1.1		not-accessible	Attributes common to all iANS-TeamMember Adapters. There is one 'entry' for each team member adapter.
NUM ansMemberIndex	1.3.6.1.4.1.343.2.7.2.2.5.1.1.1	InterfaceIndex	read-only	A unique value for each member. The value is non-negative and identical to the value of the physical adapter associated with this member.
ansMembersAttrTable	1.3.6.1.4.1.343.2.7.2.2.5.1		not-accessible	Attributes common to all iANS-TeamMember Adapters.
ansMembersAttrTables	1.3.6.1.4.1.343.2.7.2.2.5
ansNotificationGroup	1.3.6.1.4.1.3183.1.7.1			A collection of notification for ans notification
ansNotificationGroups	1.3.6.1.4.1.3183.1.7
I32 ansNumberOfMembers	1.3.6.1.4.1.343.2.7.2.2.4.1.1.2	Integer32	read-only	Number of member adapters in the team.
I32 ansNumberOfVirtualAdapters	1.3.6.1.4.1.343.2.7.2.2.4.1.1.3	Integer32	read-only	Number of virtual adapters in the team.
NTF ansRemovedTrap	1.3.6.1.4.1.343.2.7.2.3.3.1.3			Team has been removed.
INT ansTeamAggrSelectionMode	1.3.6.1.4.1.343.2.7.2.2.4.3.1.14	INTEGER	read-only	Indicates aggregation selection mode when in IEEE 802.3AD mode.
ansTeamAttrEntry	1.3.6.1.4.1.343.2.7.2.2.4.3.1		not-accessible	ANS team attributes. Appears only when adapter teaming exist. There is one 'entry' for each team.
INT ansTeamCurrentPrimaryIndex	1.3.6.1.4.1.343.2.7.2.2.4.3.1.10	INTEGER	read-only	Index of the current primary member adapter.
C32 ansTeamFailoverCounter	1.3.6.1.4.1.343.2.7.2.2.4.3.1.12	Counter32	read-only	Failover counter - that is, the number of failovers the team suffered. This value can be reset by the user - that is, it can be set to zero only; no other value is permitted.
NTF ansTeamFailoverTrap	1.3.6.1.4.1.343.2.7.2.3.3.1.1			The primary team member has been changed.
INT ansTeamLinkState	1.3.6.1.4.1.343.2.7.2.2.4.3.1.3	INTEGER	read-only	Team link state. Aggregation of the link state of all team members ( 0 = some up).
INT ansTeamLoadBalanceRefresh	1.3.6.1.4.1.343.2.7.2.2.4.3.1.7	INTEGER	read-only	In seconds. If available, the number of seconds that passes before the software resets or refreshes the current load across team members.
ansTeamMemberAttrEntry	1.3.6.1.4.1.343.2.7.2.2.5.2.1		not-accessible	Attributes of iANS-TeamMember Adapters related to adapter teaming. Appears only if adapter teaming exists.
C32 ansTeamMemberFailureCounter	1.3.6.1.4.1.343.2.7.2.2.5.2.1.2	Counter32	read-only	Failure counter - that is, the number of failovers from this member. This value can be reset by the user - that is, it can be set to zero only; no other value is permitted.
INT ansTeamMemberPriority	1.3.6.1.4.1.343.2.7.2.2.5.2.1.3	INTEGER	read-only	Priority of the team member.
ansTeamMembersAttrTable	1.3.6.1.4.1.343.2.7.2.2.5.2		not-accessible	Attributes common to all iANS-TeamMember Adapters.
INT ansTeamMemberState	1.3.6.1.4.1.343.2.7.2.2.5.2.1.1	INTEGER	read-only	iANS-TeamMember adapter state.
INT ansTeamMode	1.3.6.1.4.1.343.2.7.2.2.4.3.1.2	INTEGER	read-only	Team mode.
STR ansTeamName	1.3.6.1.4.1.343.2.7.2.2.4.3.1.1	DisplayString	read-only	Unique ANS team name
INT ansTeamPreferredPrimaryIndex	1.3.6.1.4.1.343.2.7.2.2.4.3.1.9	INTEGER	read-only	Index of the preferred primary member adapter.
INT ansTeamPreviousPrimaryIndex	1.3.6.1.4.1.343.2.7.2.2.4.3.1.11	INTEGER	read-only	Index of the previous primary member adapter.
INT ansTeamProbesMode	1.3.6.1.4.1.343.2.7.2.2.4.3.1.6	INTEGER	read-only	Mode of probe usage.
INT ansTeamProbesSendTime	1.3.6.1.4.1.343.2.7.2.2.4.3.1.8	INTEGER	read-only	In seconds. If available, the interval in seconds during which probe packets are sent.
INT ansTeamProbesState	1.3.6.1.4.1.343.2.7.2.2.4.3.1.5	INTEGER	read-only	If enabled, the ANS uses probes to check on its members.
INT ansTeamRlbSupport	1.3.6.1.4.1.343.2.7.2.2.4.3.1.15	INTEGER	read-only	Indicates whether 'receive load balancing support' is enabled when in AdaptiveLoadBalancing teaming mode. (If disabled, only the transmission is balanced.)
ansTeamsAttrTable	1.3.6.1.4.1.343.2.7.2.2.4.3		not-accessible	ANS team attributes.
INT ansTeamSlaCompatible	1.3.6.1.4.1.343.2.7.2.2.4.3.1.13	INTEGER	read-only	Indicates compatibility with Static Link Aggregation mode when in IEEE 802.3AD mode.
G32 ansTeamSpeed	1.3.6.1.4.1.343.2.7.2.2.4.3.1.4	Gauge32	read-only	Team speed.Speed of the current primary member (in Mbps).
INT ansTrapEnable	1.3.6.1.4.1.343.2.7.2.3.3.2	INTEGER	read-write	Indicates whether team traps are enabled. The user can set this value.
ansTraps	1.3.6.1.4.1.343.2.7.2.3.3.1
ansVlanAttrEntry	1.3.6.1.4.1.343.2.7.2.2.4.2.1		not-accessible	ANS VLAN attributes. Appears only if VLAN is active. There is one 'entry' for each Vlan.
ansVlansAttrTable	1.3.6.1.4.1.343.2.7.2.2.4.2		not-accessible	ANS attributes.
INT ansVlanTaggingType	1.3.6.1.4.1.343.2.7.2.2.4.2.1.1	INTEGER	read-only	Tagging type of the VLAN adapter.
STR company	1.3.6.1.4.1.343.2.7.2.1.1	DisplayString	read-only	Company that provided this MIB - Intel(R) Corporation.
component_description	1.3.6.1.4.1.343.2.7.2.1
STR description	1.3.6.1.4.1.343.2.7.2.1.2	DisplayString	read-only	Description of this component - Intel(R) Network Adapter(s), Advanced Management.
events	1.3.6.1.4.1.343.2.7.2.3
genericAdapterAttrEntry	1.3.6.1.4.1.343.2.7.2.2.1.1.1		not-accessible	Attributes common to all kinds of adapters. There is one 'entry' for each physical or virtual adapter.
genericAdapterDriverAttrEntry	1.3.6.1.4.1.343.2.7.2.2.1.2.1		not-accessible	Attributes common to all kinds of adapter drivers. There is one 'entry' for each adapter driver
genericAdaptersAttrTable	1.3.6.1.4.1.343.2.7.2.2.1.1		not-accessible	Attributes common to all kinds of adapters.
genericAdaptersAttrTables	1.3.6.1.4.1.343.2.7.2.2.1
genericAdaptersDriversAttrTable	1.3.6.1.4.1.343.2.7.2.2.1.2		not-accessible	Attributes common to all kinds of adapter drivers.
genericAdaptersTrafficStatsAttrTable	1.3.6.1.4.1.343.2.7.2.2.1.3		not-accessible	Traffic stats common to all kinds of adapters.
genericAdapterTrafficStatsAttrEntry	1.3.6.1.4.1.343.2.7.2.2.1.3.1		not-accessible	Traffic stats common to all kinds of adapters. There is one 'entry' for each adapter instance.
intel	1.3.6.1.4.1.343
intel_lan_adapters	1.3.6.1.4.1.343.2.7.2
intellan	1.3.6.1.4.1.3183			The MIB module for Intel LAN SNMP agent.
intellan_compliance	1.3.6.1.4.1.3183.1.10.1			Compliance statements for the Intel Lan Agent.
intellan_conformance	1.3.6.1.4.1.3183.1
intellanCompliances	1.3.6.1.4.1.3183.1.10
STR mibVersion1_4_3	1.3.6.1.4.1.343.2.7.2.1.4	DisplayString	read-only	Version of this MIB - the empty string is always returned.
STR mibVersionSupported	1.3.6.1.4.1.343.2.7.2.1.5	DisplayString	read-only	Version of the MIB supported by the agent. 1.x.y indicates that every MIB version of that template is supported by the agent.
miscGroup	1.3.6.1.4.1.3183.1.3.1			A collection of objects for misc. group
miscGroups	1.3.6.1.4.1.3183.1.3
nic_products	1.3.6.1.4.1.343.2.7
STR operatingSystem	1.3.6.1.4.1.343.2.7.2.1.3	DisplayString	read-only	Operating System of the server on which the SNMP agent is executed.
phyAdapterGroup	1.3.6.1.4.1.3183.1.1.1			A collection of objects for phyiscal adapter group
phyAdapterGroups	1.3.6.1.4.1.3183.1.1
phyAdapterNotificationGroup	1.3.6.1.4.1.3183.1.2.1			A collection of notification for physical adapter notification
phyAdapterNotificationGroups	1.3.6.1.4.1.3183.1.2
INT physicalAdapterAddedRemovedTrapEnable	1.3.6.1.4.1.343.2.7.2.3.1.3	INTEGER	read-write	Indicates whether a physical adapter's 'added' and 'removed' traps are enabled. The user can set this value.
NTF physicalAdapterAddedTrap	1.3.6.1.4.1.343.2.7.2.3.1.1.3			Adapter has been installed.
physicalAdapterAttrEntry	1.3.6.1.4.1.343.2.7.2.2.2.1.1		not-accessible	Attributes common to all Physical Adapters. There is one 'entry' for each standalone or member adapter.
physicalAdapterAttrOffloadEntry	1.3.6.1.4.1.343.2.7.2.2.2.2.1		not-accessible	Attributes of offloading-enabled physical adapters. There is one 'entry' for each SNMP-compliant physical adapter.
INT physicalAdapterAutoNegotiation	1.3.6.1.4.1.343.2.7.2.2.2.1.1.6	INTEGER	read-only	Physical adapter autonegotiation mode. This value appears only if it is available - that is, only if the driver is compliant with SNMP; otherwise, NO_SUCH_NAME is returned.
PHY physicalAdapterCurrentNA	1.3.6.1.4.1.343.2.7.2.2.2.1.1.10	PhysAddress	read-only	Current MAC address of the physical adapter(in hex notation).
INT physicalAdapterDplxMode	1.3.6.1.4.1.343.2.7.2.2.2.1.1.5	INTEGER	read-only	Physical Adapter Duplex Mode. Appears only for an SNMP-compliant adapter with link up.
I32 physicalAdapterExpressTeamBundleId	1.3.6.1.4.1.343.2.7.2.2.2.1.1.14	Integer32	read-only	Unique value to identify the express team in the system.
INT physicalAdapterExpressTeamed	1.3.6.1.4.1.343.2.7.2.2.2.1.1.13	INTEGER	read-only	Physical Adapter Express team status. Appears only for an adapter with express teaming capability.
NUM physicalAdapterIndex	1.3.6.1.4.1.343.2.7.2.2.2.1.1.1	InterfaceIndex	read-only	A unique value, greater than or equal to zero, for each interface.
INT physicalAdapterIpv4RxChecksumOffLoadEnable	1.3.6.1.4.1.343.2.7.2.2.2.2.1.4	INTEGER	read-only	When enabled, IPv4 for 'receive' checksums are performed in hardware.
INT physicalAdapterIpv4TCPSegmentationOffLoadEnable	1.3.6.1.4.1.343.2.7.2.2.2.2.1.6	INTEGER	read-only	When enabled, TCP Segmentation is performed in hardware.
INT physicalAdapterIpv4TxChecksumOffLoadEnable	1.3.6.1.4.1.343.2.7.2.2.2.2.1.5	INTEGER	read-only	When enabled, IPv4 for 'receive' checksums are performed in hardware.
I32 physicalAdapterIrq	1.3.6.1.4.1.343.2.7.2.2.2.1.1.9	Integer32	read-only	Physical adapter Interrupt Request number.
NTF physicalAdapterLinkDownTrap	1.3.6.1.4.1.343.2.7.2.3.1.1.2			Adapter has reached a link down state.
INT physicalAdapterLinkStatus	1.3.6.1.4.1.343.2.7.2.2.2.1.1.2	INTEGER	read-only	Physical adapter link status. Appears only if available - that is, only if the driver is compliant with SNMP; otherwise, NO_SUCH_NAME is returned.
C32 physicalAdapterLinkStatusChangesCounter	1.3.6.1.4.1.343.2.7.2.2.2.1.1.3	Counter32	read-only	Number of changes in physical adapter link status. Any change ('up-to-down' or 'down- to-up') is counted. This value can be reset (to zero) by the user; no other value is permitted. This value appears only if it is available - that is, only if the driver is compliant with SNMP; otherwise, NO_SUCH_NAME is returned.
INT physicalAdapterLinkUpDownTrapEnable	1.3.6.1.4.1.343.2.7.2.3.1.2	INTEGER	read-write	Indicates whether a physical adapter's link up and link down traps are enabled. The user can set this value.
NTF physicalAdapterLinkUpTrap	1.3.6.1.4.1.343.2.7.2.3.1.1.1			Adapter has reached a linkup state.
NTF physicalAdapterOnlineDiagFailedTrap	1.3.6.1.4.1.343.2.7.2.3.1.1.6			Adapter's online diagnostics failed. Online diagnostics might fail because of link loss or other hardware issues.
INT physicalAdapterOnlineDiagPassedFailedTrapEnable	1.3.6.1.4.1.343.2.7.2.3.1.4	INTEGER	read-write	Indicates whether physicalAdapterOnlineDiag 'passed' and 'failed' are enabled.
NTF physicalAdapterOnlineDiagPassedTrap	1.3.6.1.4.1.343.2.7.2.3.1.1.5			Adapter's online diagnostics passed.
INT physicalAdapterOnlineDiagStatus	1.3.6.1.4.1.343.2.7.2.2.2.1.1.12	INTEGER	read-only	The Online Diagnostics Status of the Physical Adapter. Online Diagnostics consist of Link Test and other Hardware Tests.
I32 physicalAdapterPciBus	1.3.6.1.4.1.343.2.7.2.2.2.1.1.7	Integer32	read-only	Physical adapter PCI bus number.
I32 physicalAdapterPciSlot	1.3.6.1.4.1.343.2.7.2.2.2.1.1.8	Integer32	read-only	Physical adapter PCI slot number.
PHY physicalAdapterPermanentNA	1.3.6.1.4.1.343.2.7.2.2.2.1.1.11	PhysAddress	read-only	Permanent MAC address of the physical adapter(in hex notation).
NTF physicalAdapterRemovedTrap	1.3.6.1.4.1.343.2.7.2.3.1.1.4			Adapter has been uninstalled.
physicalAdaptersAttrOffloadTable	1.3.6.1.4.1.343.2.7.2.2.2.2		not-accessible	Attributes of offloading-enabled physical adapters. There is one 'entry' for each SNMP-compliant physical adapter.
physicalAdaptersAttrTable	1.3.6.1.4.1.343.2.7.2.2.2.1		not-accessible	Attributes common to all Physical Adapters.
physicalAdaptersAttrTables	1.3.6.1.4.1.343.2.7.2.2.2
physicalAdaptersEvents	1.3.6.1.4.1.343.2.7.2.3.1
G32 physicalAdapterSpeed	1.3.6.1.4.1.343.2.7.2.2.2.1.1.4	Gauge32	read-only	Physical adapter speed (in Mbps). Appears only for an SNMP-compliant adapter with link up.
physicalAdaptersTraps	1.3.6.1.4.1.343.2.7.2.3.1.1
C32 physicalAdapterTcpRxChecksumBad	1.3.6.1.4.1.343.2.7.2.2.2.2.1.2	Counter32	read-only	Number of bad 'receive' checksums.
INT physicalAdapterTcpRxChecksumOffLoadEnable	1.3.6.1.4.1.343.2.7.2.2.2.2.1.1	INTEGER	read-only	When enabled, TCP for 'receive' checksums are performed in hardware.
INT physicalAdapterTcpTxChecksumOffLoadEnable	1.3.6.1.4.1.343.2.7.2.2.2.2.1.3	INTEGER	read-only	When enabled, TCP for 'transmit' checksums are performed in hardware.
products	1.3.6.1.4.1.343.2
INT status	1.3.6.1.4.1.343.2.7.2.1.7	INTEGER	read-only	Indicates status and functionality of the adapter(s) - whether the base driver and ANS are loaded.
teamGroup	1.3.6.1.4.1.3183.1.8.1			A collection of objects for team group
teamGroups	1.3.6.1.4.1.3183.1.8
NTF teamMemberAddedTrap	1.3.6.1.4.1.343.2.7.2.3.4.1.1			Member has been added to a team.
NTF teamMemberRemovedTrap	1.3.6.1.4.1.343.2.7.2.3.4.1.2			Member has been removed from a team.
teamMembersEvents	1.3.6.1.4.1.343.2.7.2.3.4
teamMembersTraps	1.3.6.1.4.1.343.2.7.2.3.4.1
INT teamMemberTrapEnable	1.3.6.1.4.1.343.2.7.2.3.4.2	INTEGER	read-write	Indicates whether traps for members are enabled. The user can set this value.
teamNotificationGroup	1.3.6.1.4.1.3183.1.9.1			A collection of notification for team notification
teamNotificationGroups	1.3.6.1.4.1.3183.1.9
NTF virtualAdapterAddedTrap	1.3.6.1.4.1.343.2.7.2.3.2.1.1			Virtual adapter has been added to a team.
I32 virtualAdapterAnsId	1.3.6.1.4.1.343.2.7.2.2.3.1.1.2	Integer32	read-only	ID of the team to which the adapter belongs.
virtualAdapterAttrEntry	1.3.6.1.4.1.343.2.7.2.2.3.1.1		not-accessible	Attributes common to all iANS-virtual adapters. There is one 'entry' for each virtual adapter
NUM virtualAdapterIndex	1.3.6.1.4.1.343.2.7.2.2.3.1.1.1	InterfaceIndex	read-only	A unique value, greater than or equal to zero, for each interface.
NTF virtualAdapterRemovedTrap	1.3.6.1.4.1.343.2.7.2.3.2.1.2			Virtual adapter has been removed from a team.
virtualAdaptersAttrTable	1.3.6.1.4.1.343.2.7.2.2.3.1		not-accessible	Attributes common to all iANS-virtual adapters.
virtualAdaptersAttrTables	1.3.6.1.4.1.343.2.7.2.2.3
virtualAdaptersEvents	1.3.6.1.4.1.343.2.7.2.3.2
INT virtualAdaptersTrapEnable	1.3.6.1.4.1.343.2.7.2.3.2.2	INTEGER	read-write	Indicates whether virtual adapter traps are enabled. The user can set this value.
virtualAdaptersTraps	1.3.6.1.4.1.343.2.7.2.3.2.1
virtualAdaptersVlanAttrTable	1.3.6.1.4.1.343.2.7.2.2.3.2		not-accessible	Attributes common to all iANS-virtual adapters VLANs.
virtualAdapterVlanAttrEntry	1.3.6.1.4.1.343.2.7.2.2.3.2.1		not-accessible	VLAN attributes.Appears for virtual adapters that support VLANs only. There is one 'entry' for each VLAN.
INT virtualAdapterVlanId	1.3.6.1.4.1.343.2.7.2.2.3.2.1.1	INTEGER	read-only	ID for this virtual adapter VLAN.
vtAdapterGroup	1.3.6.1.4.1.3183.1.4.1			A collection of objects for virtual adapter group
vtAdapterGroups	1.3.6.1.4.1.3183.1.4
vtAdapterNotificationGroup	1.3.6.1.4.1.3183.1.5.1			A collection of notification for virtual adapter notification
vtAdapterNotificationGroups	1.3.6.1.4.1.3183.1.5

RFC description

Intel LAN adapter SNMP agent management with NIC product monitoring and statistics.

Start monitoring Server/workstation host with Intel Ethernet LAN adapter(s) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download INTEL-LAN-ADAPTERS-MIB