ITOUCH-ETHERNET-MIB

All MIBs › ITOUCH-ETHERNET-MIB

Category: Network Interfaces, Vendor: iTouch

Description: iTouch Ethernet MIB providing SNMP objects for Ethernet interface statistics and configuration on iTouch networking devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ITOUCH-ETHERNET-MIB?

ITOUCH-ETHERNET-MIB is a vendor-specific SNMP module from Allied Telesis for their iTouch line of routers and switches, part of the broader iTouch enterprise MIB family. It exposes Ethernet interface-level data such as physical/link configuration and traffic statistics for ports on the device. Because it reports per-port counters and interface settings, it is used to monitor interface hardware status—link up/down state, traffic and error counters, and duplex/speed configuration—functioning as an interface health and performance monitoring aid for these devices. It commonly complements the standard IF-MIB/RFC1213 interface tables rather than replacing them. It is typically deployed on legacy Allied Telesis iTouch routers/switches needing basic per-port Ethernet visibility. Engineers can download the ITOUCH-ETHERNET-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ITOUCH-ETHERNET-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Allied Telesis iTouch routers/switches
MRV Communications In-Reach terminal servers (formerly iTouch Communications)

Monitoring Examples

No sample object names were supplied for this MIB, so specific table/object names cannot be confirmed here. Based on the description, an admin would typically poll interface-level tables analogous to ifTable-style entries for per-port Ethernet counters (bytes, packets, errors) and link status to detect a failing or flapping port. Because no object list was provided, exact object names beyond this general expectation cannot be cited.

What Can Be Monitored

Ethernet interface link status
interface traffic counters
interface error counters
port speed/duplex configuration

Imported Objects

From ITOUCH-MIB

iTouch

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter

OIDs

OID symbolic	OID numeric	Type	Access	Description
CTR etherAlignmentErrors	1.3.6.1.4.1.33.11.1.1.2	Counter	read-only	A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check.
etherEntry	1.3.6.1.4.1.33.11.1.1		not-accessible	Generic status and parameter values for an Ethernet interface.
CTR etherFCSErrors	1.3.6.1.4.1.33.11.1.1.3	Counter	read-only	A count of frames received on a particular interface that are an integral number of octets in length that do not pass the FCS check.
INT etherIndex	1.3.6.1.4.1.33.11.1.1.1	INTEGER	read-only	An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
CTR etherMulticastBytesIn	1.3.6.1.4.1.33.11.3.1.2	Counter	read-only	A count of frames successfully received on a particular interface and for which the destination address multicast bit was set. Bytes that are counted by an instance of this object are also counted by the corresponding instance of the ifInOctets object.
CTR etherMulticastBytesOut	1.3.6.1.4.1.33.11.3.1.3	Counter	read-only	A count of successfully frames successfully transmitted on a particular interface and for which the destination address multicast bit was set. Bytes that are counted by an instance of this object are also counted by the corresponding instance of the ifOutOctets object.
etherMulticastEntry	1.3.6.1.4.1.33.11.3.1		not-accessible	EtherMulticast status and parameter values for an Ethernet interface.
INT etherMulticastIndex	1.3.6.1.4.1.33.11.3.1.1	INTEGER	read-only	An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
etherMulticastTable	1.3.6.1.4.1.33.11.3		not-accessible	A list of etherMulticast entries.
etherTable	1.3.6.1.4.1.33.11.1		not-accessible	A list of generic entries.
etherTxEntry	1.3.6.1.4.1.33.11.2.1		not-accessible	Transmit status and parameter values for an Ethernet interface.
INT etherTxIndex	1.3.6.1.4.1.33.11.2.1.1	INTEGER	read-only	An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
CTR etherTxMultipleCollisionFrames	1.3.6.1.4.1.33.11.2.1.3	Counter	read-only	A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts or ifOutNUcastPkts object and is not counted by the corresponding instance of the etherTxSingleCollisionFrames object.
CTR etherTxSingleCollisionFrames	1.3.6.1.4.1.33.11.2.1.2	Counter	read-only	A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts or ifOutNUcastPkts object and is not counted by the corresponding instance of the etherTxMultipleCollisionFrames object.
etherTxTable	1.3.6.1.4.1.33.11.2		not-accessible	A list of Ethernet transmit entries.
etherXTxEntry	1.3.6.1.4.1.33.11.4.1		not-accessible	Extended transmit status and parameter values for an Ethernet interface.
CTR etherXTxExcessiveCollisions	1.3.6.1.4.1.33.11.4.1.2	Counter	read-only	A count of frames for which transmission on a particular interface fails due to excessive collisions.
INT etherXTxIndex	1.3.6.1.4.1.33.11.4.1.1	INTEGER	read-only	An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
etherXTxTable	1.3.6.1.4.1.33.11.4		not-accessible	A list of Ethernet extended transmit entries.
xEthernet	1.3.6.1.4.1.33.11

RFC description

iTouch Ethernet interface MIB for generic Ethernet port status, error counters, and configuration monitoring.

Start monitoring MRV Communications In-Reach terminal servers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ITOUCH-ETHERNET-MIB

What Is ITOUCH-ETHERNET-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description