HP-ICF-VG-RPTR

All MIBs › HP-ICF-VG-RPTR

Organization: Hewlett Packard Company, Network Infrastructure Solutions

Last Updated: 2000-11-03

Category: Network Interfaces, Vendor: HP/HPE

Description:

HP ICF SNMP MIB for IEEE 802.12 100VG-AnyLAN repeater management on HP ProCurve voice-grade concentrators.

Imported Objects

hpicfObjectModules	OBJECT-IDENTITY
hpicfVg	OBJECT-IDENTITY
hpicfVgRptrTrapsPrefix	OBJECT-IDENTITY

From ICF-VG-RPTR

icfVgPortStatus

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TruthValue

What Is HP-ICF-VG-RPTR?

HP-ICF-VG-RPTR provides Hewlett-Packard-specific extensions to the standard IEEE 802.12 Repeater MIB for 100VG-AnyLAN repeaters/concentrators, an HP-championed legacy voice-grade LAN technology. It exposes port and repeater-level configuration and statistics for this now-obsolete 100VG-AnyLAN hub/repeater hardware. Its monitoring relevance is chiefly hardware/link status — port link state, repeater health, and traffic counters on legacy voice-grade concentrator hardware. It explicitly extends the standard 802.12 Repeater MIB, layering HP-specific objects on top of that IEEE-defined base. It would have been deployed in legacy HP voice-grade LAN installations from the 1990s, where HP-ICF-VG-RPTR SNMP monitoring is now of primarily historical/legacy-equipment interest.

IPNetwork Monitor allows you to monitor SNMP objects defined in HP-ICF-VG-RPTR. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

What Can Be Monitored

repeater port link status
port traffic/error counters
repeater operational status

Supported Devices

HP 100VG-AnyLAN repeater/concentrator (legacy)

Monitoring Examples

No concrete object names were present in the sampled source beyond the module's stated purpose, so specifics cannot be confirmed here. In combination with the base 802.12 Repeater MIB, such extensions would typically be used to poll per-port link and error-counter objects on a 100VG-AnyLAN repeater to detect a failed or degraded port on this legacy concentrator hardware.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpicfVgRptrBasicGroup	1.3.6.1.4.1.11.2.14.10.2.11.1.2.2			HP specific extensions to the 802.12 Repeater MIB providing status and configuration of 802.12 repeaters.
hpicfVgRptrBasicTraps	1.3.6.1.4.1.11.2.14.10.2.11.1.2.7			A collection of notifications used to indicate port status changes on 802.12 repeaters.
hpicfVgRptrCompliance	1.3.6.1.4.1.11.2.14.10.2.11.1.1.2			The compliance statement for HP 802.12 repeaters.
hpicfVgRptrCompliances	1.3.6.1.4.1.11.2.14.10.2.11.1.1
hpicfVgRptrConformance	1.3.6.1.4.1.11.2.14.10.2.11.1
hpicfVgRptrGroups	1.3.6.1.4.1.11.2.14.10.2.11.1.2
hpicfVgRptrMib	1.3.6.1.4.1.11.2.14.10.2.11			This MIB module contains objects that provide HP-specific extensions to the 802.12 Repeater MIB.
hpicfVgRptrMonitorGroup	1.3.6.1.4.1.11.2.14.10.2.11.1.2.4			HP specific extensions to the 802.12 Repeater MIB providing global counters for 802.12 repeaters.
hpicfVgRptrPreDot12BasicGroup	1.3.6.1.4.1.11.2.14.10.2.11.1.2.1			******* THIS GROUP IS OBSOLETE ******* HP specific extensions to the 802.12 Repeater MIB providing status and configuration of pre-standard 802.12 repeaters.
hpicfVgRptrPreDot12Compliance	1.3.6.1.4.1.11.2.14.10.2.11.1.1.1			******* THIS COMPLIANCE IS OBSOLETE ******* The compliance statement for pre-standard HP 100VG repeaters.
hpicfVgRptrPreDot12MonitorGroup	1.3.6.1.4.1.11.2.14.10.2.11.1.2.3			******* THIS GROUP IS OBSOLETE ******* HP specific extensions to the 802.12 Repeater MIB providing global counters for pre-standard 802.12 repeaters.
hpicfVgRptrRedundantUplinkGroup	1.3.6.1.4.1.11.2.14.10.2.11.1.2.6			A collection of objects for configuring redundant uplinks on 802.12 repeaters.
hpicfVgRptrRedundantUplinkTraps	1.3.6.1.4.1.11.2.14.10.2.11.1.2.8			A collection of notifications used to indicate status changes on the redundant uplinks on 802.12 repeaters.
hpicfVgRptrXcvrGroup	1.3.6.1.4.1.11.2.14.10.2.11.1.2.5			A collection of objects for configuring and monitoring tranceivers on 802.12 repeaters.
hpVgBasic	1.3.6.1.4.1.11.2.14.11.3.1
hpVgBasicGlobal	1.3.6.1.4.1.11.2.14.11.3.1.1
hpVgBasicGroup	1.3.6.1.4.1.11.2.14.11.3.1.2
hpVgBasicGroupEntry	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1		not-accessible	An entry in the table, containing HP extensions for a specific group.
hpVgBasicGroupTable	1.3.6.1.4.1.11.2.14.11.3.1.2.1		not-accessible	HP specific extensions to the vgBasicGroupTable.
hpVgBasicPort	1.3.6.1.4.1.11.2.14.11.3.1.3
hpVgBasicPortEntry	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1		not-accessible	HP extended information about a specific vg port.
hpVgBasicPortTable	1.3.6.1.4.1.11.2.14.11.3.1.3.1		not-accessible	HP specific extensions to the vg port table.
STR hpVgEntityName	1.3.6.1.4.1.11.2.14.11.3.1.1.1	DisplayString	read-only	The local name of this 100BaseVG repeater. This is the same value as hpicfEntityName in the case where there is Distributed Management Protocol to access this device. For SNMPv1, this name is appended to the agent community name to obtain a community name to use to specify that the agent should proxy to this repeater. For example, if this agent has a community with a community name of 'public', and the value of this object is 'repeater1', the community 'public/repeater1' will specify that the agent should proxy to the public community of the repeater1 box to obtain management information about this repeater. If an agent receives a management request where the localEntity is not specified, it will default to the local repeater on which this agent is executing.
I32 hpVgGrpGroupIndex	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.1	Integer32	not-accessible	The group within the repeater for which this entry contains information. This object has the same value as the corresponding instance of icfVgGroupIndex.
OCT hpVgGrpPortsAdminStatus	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.2	OCTET STRING	read-only	The hpVgGrpPortsAdminStatus is a bit map of the state of the icfVgPortAdminStatus object for all of the ports in this group. The object has a one bit for each port for which the value of icfVgPortAdminStatus is equal to 'enabled(1)' and a zero bit for each port for which the value of icfVgPortAdminStatus is equal to 'disabled(2)'. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpVgGrpPortsCascaded	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.5	OCTET STRING	read-only	The hpVgGrpPortsCascaded is a bit map which indicates which ports in this group have trained as cascaded repeater ports. The object has a one bit for each port which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to 'active(1)'. 3. The value of the 'R' bit in the corresponding instance of the icfVgPortTrainingResult object is equal to one. The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpVgGrpPortsInTraining	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.4	OCTET STRING	read-only	The hpVgGrpPortsInTraining is a bit map which indicates which ports in this group are currently in the training state. The object has a one bit for each port which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to 'training(3)'. The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpVgGrpPortsPromiscuous	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.6	OCTET STRING	read-only	The hpVgGrpPortsPromiscuous is a bit map which indicates which ports in this group have trained for promiscuous operation. The object has a one bit for each port which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to 'active(1)'. 3. The value of the 'PP' field in the corresponding instance of the icfVgPortTrainingResult object is equal to 01. The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpVgGrpPortsTrained	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.3	OCTET STRING	read-only	The hpVgGrpPortsTrained is a bit map which indicates which ports in this group are currently online. The object has a one bit for each port for which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to 'active(1)'. The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
NTF hpVgLossOfActiveTrap	1.3.6.1.4.1.11.2.14.12.3.0.2			An hpVgLossOfActiveTrap is sent whenever an enabled port transitions from the active state to either the inactive or training state. The new value of the port's status is returned in the trap.
hpVgMonCounters	1.3.6.1.4.1.11.2.14.11.3.2.1.1
C32 hpVgMonGlbBroadcastFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.6	Counter32	read-only	This object is a count of the total number of broadcast packets that have been received on all ports in this repeater. This counter is a summation of the values of the icfVgPortBroadcastFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbDataErrorFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.9	Counter32	read-only	This object is a count of the total number of errored frames received on all ports in this repeater. This counter is a summation of the values of the icfVgPortDataErrorFrames counter for all of the ports in this repeater.
C64 hpVgMonGlbHCHighPriorityOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.13	Counter64	read-only	This object is a count of the total number of octets contained in high priority frames that have been received on all ports of this repeater. This counter is a summation of the values of the icfVgPortHighPriorityOctets counter for all of the ports in this repeater. This counter is a 64 bit version of hpVgMonGlbHighPriorityOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
C64 hpVgMonGlbHCNormPriorityOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.14	Counter64	read-only	This object is a count of the total number of octets contained in normal priority frames that have been received on all ports of this repeater. This counter is a summation of the values of the icfVgPortNormPriorityOctets counter for all of the ports in this repeater. This counter is a 64 bit version of hpVgMonGlbNormPriorityOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
C64 hpVgMonGlbHCReadableOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.11	Counter64	read-only	This object is a count of the total number of octets contained in good frames that have been received on all ports in this repeater. This counter is the summation of the values of the icfVgPortReadableOctets counter for all of the ports in this repeater. This counter is a 64 bit version of hpVgMonGlbReadableOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
C64 hpVgMonGlbHCUnreadableOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.12	Counter64	read-only	This object is a count of the total number of octets contained in invalid frames that have been received on all ports in this repeater. This counter is the summation of the values of icfVgPortUnreadableOctets counter for all of the ports in this repeater. This counter is a 64 bit version of hpVgMonGlbUnreadableOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
C32 hpVgMonGlbHighPriorityFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.4	Counter32	read-only	This object is a count of the total number of high priority frames that have been received on all ports in this repeater. This counter is a summation of the values of the icfVgPortHighPriorityFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbHighPriorityOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.5	Counter32	read-only	This object is a count of the total number of octets contained in high priority frames that have been received on all ports of this repeater. This counter is a summation of the values of the icfVgPortHighPriorityOctets counter for all of the ports in this repeater. Note that this counter will roll over very quickly. It is provided for backward compatibility for Network Management protocols that do not support 64 bit counters (e.g. SNMP version 1).
C32 hpVgMonGlbIPMFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.8	Counter32	read-only	This object is a count of the total number of frames that have been received on all ports in this repeater with an invalid packet marker. This counter is a summation of the values of the icfVgPortIPMFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbMulticastFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.7	Counter32	read-only	This object is a count of the total number of multicast packets that have been received on all ports in this repeater. This counter is a summation of the values of the icfVgPortMulticastFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbNormPriorityFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.15	Counter32	read-only	This object is a count of the total number of normal priority frames received on all ports in this repeater. This counter is a summation of the values of the icfVgPortNormPriorityFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbNormPriorityOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.16	Counter32	read-only	This object is a count of the total number of normal priority octets received on all ports in this repeater. This counter is a summation of the values of the icfVgPortNormPriorityOctets counter for all of the ports in this repeater.
C32 hpVgMonGlbNullAddressedFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.17	Counter32	read-only	This object is a count of the total number of null addressed packets that have been received on all ports. This counter is a summation of the values of the icfVgPortNullAddressedFrames counter for the ports in this repeater.
C32 hpVgMonGlbOversizeFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.18	Counter32	read-only	This object is a count of the total number of oversized frames that have been received on all ports. This counter is a summation of the values of the icfVgPortOversizeFrames counter for the ports in this repeater.
C32 hpVgMonGlbPriorityPromotions	1.3.6.1.4.1.11.2.14.11.3.2.1.1.10	Counter32	read-only	This object is a count of the total number of times the priority promotion timer has expired on any port in this repeater. This counter is a summation of the values of the icfVgPortPriorityPromotions counter for all of the ports in this repeater.
C32 hpVgMonGlbReadableFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.1	Counter32	read-only	This object is the total number of good frames of valid frame length that have been received on all ports in this repeater. This counter is the summation of the values of the icfVgPortReadableFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbReadableOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.2	Counter32	read-only	This object is a count of the total number of octets contained in good frames that have been received on all ports in this repeater. This counter is the summation of the values of the icfVgPortReadableOctets counter for all of the ports in this repeater. Note that this counter will roll over very quickly. It is provided for backward compatibility for Network Management protocols that do not support 64 bit counters (e.g. SNMP version 1).
C32 hpVgMonGlbTransitionToTrainings	1.3.6.1.4.1.11.2.14.11.3.2.1.1.19	Counter32	read-only	This object is a count of the total number of transitions to training on all ports. This counter is a summation of the values of the icfVgPortTransitionToTrainings counter for the ports in this repeater.
C32 hpVgMonGlbUnreadableOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.3	Counter32	read-only	This object is a count of the total number of octets contained in invalid frames that have been received on all ports in this repeater. This counter is the summation of the values of icfVgPortUnreadableOctets counter for all of the ports in this repeater. Note that this counter will roll over very quickly. It is provided for backward compatibility for Network Management protocols that do not support 64 bit counters (e.g. SNMP version 1).
hpVgMonitor	1.3.6.1.4.1.11.2.14.11.3.2
hpVgMonitorGlobal	1.3.6.1.4.1.11.2.14.11.3.2.1
hpVgMonitorGroup	1.3.6.1.4.1.11.2.14.11.3.2.2
hpVgMonitorPort	1.3.6.1.4.1.11.2.14.11.3.2.3
INT hpVgNullAddrTraining	1.3.6.1.4.1.11.2.14.11.3.1.1.4	INTEGER	read-write	This object is used to control whether the repeater will allow completion of training by end-nodes using null MAC addresses. The 802.12 standard is written to disallow such training. However, some end-nodes may use this configuration at power-up before any software is loaded. If so, the user may see frequent training occurring on the repeater because of this. In addition, some end-node applications may not work when initial training fails due to the locking out of null MAC addresses. The default setting of this object is to allow null MAC addresses to train. This is recommended for most situations, despite the fact that it contradicts the 802.12 standard. For repeaters that have First Learned address security on this hub, disallowing null-address training provides the most extensive security until the ports' authorized addresses are learned. However, if this creates problems for the end-node applications, it may be necessary to instead explicitly assign the ports' authorized addresses and configure this object to allow null-address training.
I32 hpVgPortAssociatedXcvrIndex	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.5	Integer32	read-write	This object is the index into the transceiver table, hpVgXcvrTable. The transceiver entry defines which transceiver is connected to the port. This object will be set to 0 if the port is not currently associated with a transceiver
I32 hpVgPortGroupIndex	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.1	Integer32	not-accessible	The group that contains the port for which this entry contains information.
I32 hpVgPortIndex	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.2	Integer32	not-accessible	The port within the group for which this entry contains information.
I32 hpVgPortNumAssociatedXcvrs	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.6	Integer32	read-only	This object is the number of transceivers that are currently associated with this port via the hpVgXcvrTable.
T/F hpVgPortPolarityReversed	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.3	TruthValue	read-only	This object is used to indicate that the hub port was wired with the positive/negative polarity of its wire pairs reversed. Note that the port will continue to operate in this state, with the hub inverting the polarity internally.
T/F hpVgPortWireSkewError	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.4	TruthValue	read-only	This object is used to indicate that a wire skew error has been detected on this port.
T/F hpVgRedundantUpLinksFlag	1.3.6.1.4.1.11.2.14.11.3.1.1.2	TruthValue	read-write	This object is used to indicate that the hub is configured with redundant uplink ports.
NTF hpVgRedundantUplinkTrap	1.3.6.1.4.1.11.2.14.12.3.0.1			An hpVgRedundantUplinkTrap is sent anytime one of the tranceivers being used in a redundant uplink transitions from one of the 'unknown', 'inUse' or 'standby' states to either the 'silent' or 'linkFailure' state. The hpVgXcvrState is the new value of the tranceiver state for the tranceiver that made the transition.
C32 hpVgXcvrAbandonments	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.6	Counter32	read-only	The total number of times the corresponding instance of the hpVgXcvrState object has entered the 'abandoned' state. For downlink ports this object will have the value 0.
I32 hpVgXcvrAssociatedPort	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.4	Integer32	read-write	The port within the group that this transceiver is associated with. There may be multiple transceivers associated with a single port. Also, a transceiver may be moved between ports.
hpVgXcvrEntry	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1		not-accessible	An entry in the transceiver table
I32 hpVgXcvrGroupIndex	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.1	Integer32	not-accessible	The group within the repeater for which this entry contains information. This object has the same value as the corresponding instance of icfVgGroupIndex.
I32 hpVgXcvrIndex	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.2	Integer32	not-accessible	The transceiver within the group for which this entry contains information.
T/F hpVgXcvrIsMovable	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.7	TruthValue	read-only	A true value indicates that the transceiver can be associated with a single port from a set of multiple ports. A false value indicates that a transceiver can only be associated with a single, fixed, port
INT hpVgXcvrState	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.5	INTEGER	read-only	This object is set to 'unknown' if the transceiver is not present or its status cannot be determined. 'inUse' indicates that the transceiver is currently selected for use by its associated port. 'standby' indicates the associated port is using another tranceiver, but this tranceiver could be used if needed. 'silent' indicates that the tranceiver is not detecting any tones on the link. 'linkFailure' indicates that the tranceiver was unable to train for some reason.
hpVgXcvrTable	1.3.6.1.4.1.11.2.14.11.3.1.1.3		not-accessible	A table containing information about transceivers. All uplink, downlink, and redundent links are represented in this table
INT hpVgXcvrType	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.3	INTEGER	read-only	The type of physical media supported by this transceiver. One of the following values: other undefined unknown true state not known pmdMissing PMD device not attached utp4 4-pair unshielded twisted pair stp2 2-pair shielded twisted pair fibre 802.12 fibre optic cabling This object may be 'unknown' if the implementation is not capable of identifying the PMD media type, or whether or not the PMD is even present.

OID symbolic	OID numeric	Type	Access	Description
hpicfVgRptrMib	1.3.6.1.4.1.11.2.14.10.2.11			This MIB module contains objects that provide HP-specific extensions to the 802.12 Repeater MIB.
hpicfVgRptrConformance	1.3.6.1.4.1.11.2.14.10.2.11.1
hpicfVgRptrCompliances	1.3.6.1.4.1.11.2.14.10.2.11.1.1
hpicfVgRptrPreDot12Compliance	1.3.6.1.4.1.11.2.14.10.2.11.1.1.1			******* THIS COMPLIANCE IS OBSOLETE ******* The compliance statement for pre-standard HP 100VG repeaters.
hpicfVgRptrCompliance	1.3.6.1.4.1.11.2.14.10.2.11.1.1.2			The compliance statement for HP 802.12 repeaters.
hpicfVgRptrGroups	1.3.6.1.4.1.11.2.14.10.2.11.1.2
hpicfVgRptrPreDot12BasicGroup	1.3.6.1.4.1.11.2.14.10.2.11.1.2.1			******* THIS GROUP IS OBSOLETE ******* HP specific extensions to the 802.12 Repeater MIB providing status and configuration of pre-standard 802.12 repeaters.
hpicfVgRptrBasicGroup	1.3.6.1.4.1.11.2.14.10.2.11.1.2.2			HP specific extensions to the 802.12 Repeater MIB providing status and configuration of 802.12 repeaters.
hpicfVgRptrPreDot12MonitorGroup	1.3.6.1.4.1.11.2.14.10.2.11.1.2.3			******* THIS GROUP IS OBSOLETE ******* HP specific extensions to the 802.12 Repeater MIB providing global counters for pre-standard 802.12 repeaters.
hpicfVgRptrMonitorGroup	1.3.6.1.4.1.11.2.14.10.2.11.1.2.4			HP specific extensions to the 802.12 Repeater MIB providing global counters for 802.12 repeaters.
hpicfVgRptrXcvrGroup	1.3.6.1.4.1.11.2.14.10.2.11.1.2.5			A collection of objects for configuring and monitoring tranceivers on 802.12 repeaters.
hpicfVgRptrRedundantUplinkGroup	1.3.6.1.4.1.11.2.14.10.2.11.1.2.6			A collection of objects for configuring redundant uplinks on 802.12 repeaters.
hpicfVgRptrBasicTraps	1.3.6.1.4.1.11.2.14.10.2.11.1.2.7			A collection of notifications used to indicate port status changes on 802.12 repeaters.
hpicfVgRptrRedundantUplinkTraps	1.3.6.1.4.1.11.2.14.10.2.11.1.2.8			A collection of notifications used to indicate status changes on the redundant uplinks on 802.12 repeaters.
hpVgBasic	1.3.6.1.4.1.11.2.14.11.3.1
hpVgBasicGlobal	1.3.6.1.4.1.11.2.14.11.3.1.1
STR hpVgEntityName	1.3.6.1.4.1.11.2.14.11.3.1.1.1	DisplayString	read-only	The local name of this 100BaseVG repeater. This is the same value as hpicfEntityName in the case where there is Distributed Management Protocol to access this device. For SNMPv1, this name is appended to the agent community name to obtain a community name to use to specify that the agent should proxy to this repeater. For example, if this agent has a community with a community name of 'public', and the value of this object is 'repeater1', the community 'public/repeater1' will specify that the agent should proxy to the public community of the repeater1 box to obtain management information about this repeater. If an agent receives a management request where the localEntity is not specified, it will default to the local repeater on which this agent is executing.
T/F hpVgRedundantUpLinksFlag	1.3.6.1.4.1.11.2.14.11.3.1.1.2	TruthValue	read-write	This object is used to indicate that the hub is configured with redundant uplink ports.
hpVgXcvrTable	1.3.6.1.4.1.11.2.14.11.3.1.1.3		not-accessible	A table containing information about transceivers. All uplink, downlink, and redundent links are represented in this table
hpVgXcvrEntry	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1		not-accessible	An entry in the transceiver table
I32 hpVgXcvrGroupIndex	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.1	Integer32	not-accessible	The group within the repeater for which this entry contains information. This object has the same value as the corresponding instance of icfVgGroupIndex.
I32 hpVgXcvrIndex	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.2	Integer32	not-accessible	The transceiver within the group for which this entry contains information.
INT hpVgXcvrType	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.3	INTEGER	read-only	The type of physical media supported by this transceiver. One of the following values: other undefined unknown true state not known pmdMissing PMD device not attached utp4 4-pair unshielded twisted pair stp2 2-pair shielded twisted pair fibre 802.12 fibre optic cabling This object may be 'unknown' if the implementation is not capable of identifying the PMD media type, or whether or not the PMD is even present.
I32 hpVgXcvrAssociatedPort	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.4	Integer32	read-write	The port within the group that this transceiver is associated with. There may be multiple transceivers associated with a single port. Also, a transceiver may be moved between ports.
INT hpVgXcvrState	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.5	INTEGER	read-only	This object is set to 'unknown' if the transceiver is not present or its status cannot be determined. 'inUse' indicates that the transceiver is currently selected for use by its associated port. 'standby' indicates the associated port is using another tranceiver, but this tranceiver could be used if needed. 'silent' indicates that the tranceiver is not detecting any tones on the link. 'linkFailure' indicates that the tranceiver was unable to train for some reason.
C32 hpVgXcvrAbandonments	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.6	Counter32	read-only	The total number of times the corresponding instance of the hpVgXcvrState object has entered the 'abandoned' state. For downlink ports this object will have the value 0.
T/F hpVgXcvrIsMovable	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.7	TruthValue	read-only	A true value indicates that the transceiver can be associated with a single port from a set of multiple ports. A false value indicates that a transceiver can only be associated with a single, fixed, port
INT hpVgNullAddrTraining	1.3.6.1.4.1.11.2.14.11.3.1.1.4	INTEGER	read-write	This object is used to control whether the repeater will allow completion of training by end-nodes using null MAC addresses. The 802.12 standard is written to disallow such training. However, some end-nodes may use this configuration at power-up before any software is loaded. If so, the user may see frequent training occurring on the repeater because of this. In addition, some end-node applications may not work when initial training fails due to the locking out of null MAC addresses. The default setting of this object is to allow null MAC addresses to train. This is recommended for most situations, despite the fact that it contradicts the 802.12 standard. For repeaters that have First Learned address security on this hub, disallowing null-address training provides the most extensive security until the ports' authorized addresses are learned. However, if this creates problems for the end-node applications, it may be necessary to instead explicitly assign the ports' authorized addresses and configure this object to allow null-address training.
hpVgBasicGroup	1.3.6.1.4.1.11.2.14.11.3.1.2
hpVgBasicGroupTable	1.3.6.1.4.1.11.2.14.11.3.1.2.1		not-accessible	HP specific extensions to the vgBasicGroupTable.
hpVgBasicGroupEntry	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1		not-accessible	An entry in the table, containing HP extensions for a specific group.
I32 hpVgGrpGroupIndex	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.1	Integer32	not-accessible	The group within the repeater for which this entry contains information. This object has the same value as the corresponding instance of icfVgGroupIndex.
OCT hpVgGrpPortsAdminStatus	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.2	OCTET STRING	read-only	The hpVgGrpPortsAdminStatus is a bit map of the state of the icfVgPortAdminStatus object for all of the ports in this group. The object has a one bit for each port for which the value of icfVgPortAdminStatus is equal to 'enabled(1)' and a zero bit for each port for which the value of icfVgPortAdminStatus is equal to 'disabled(2)'. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpVgGrpPortsTrained	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.3	OCTET STRING	read-only	The hpVgGrpPortsTrained is a bit map which indicates which ports in this group are currently online. The object has a one bit for each port for which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to 'active(1)'. The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpVgGrpPortsInTraining	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.4	OCTET STRING	read-only	The hpVgGrpPortsInTraining is a bit map which indicates which ports in this group are currently in the training state. The object has a one bit for each port which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to 'training(3)'. The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpVgGrpPortsCascaded	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.5	OCTET STRING	read-only	The hpVgGrpPortsCascaded is a bit map which indicates which ports in this group have trained as cascaded repeater ports. The object has a one bit for each port which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to 'active(1)'. 3. The value of the 'R' bit in the corresponding instance of the icfVgPortTrainingResult object is equal to one. The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpVgGrpPortsPromiscuous	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.6	OCTET STRING	read-only	The hpVgGrpPortsPromiscuous is a bit map which indicates which ports in this group have trained for promiscuous operation. The object has a one bit for each port which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to 'active(1)'. 3. The value of the 'PP' field in the corresponding instance of the icfVgPortTrainingResult object is equal to 01. The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
hpVgBasicPort	1.3.6.1.4.1.11.2.14.11.3.1.3
hpVgBasicPortTable	1.3.6.1.4.1.11.2.14.11.3.1.3.1		not-accessible	HP specific extensions to the vg port table.
hpVgBasicPortEntry	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1		not-accessible	HP extended information about a specific vg port.
I32 hpVgPortGroupIndex	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.1	Integer32	not-accessible	The group that contains the port for which this entry contains information.
I32 hpVgPortIndex	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.2	Integer32	not-accessible	The port within the group for which this entry contains information.
T/F hpVgPortPolarityReversed	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.3	TruthValue	read-only	This object is used to indicate that the hub port was wired with the positive/negative polarity of its wire pairs reversed. Note that the port will continue to operate in this state, with the hub inverting the polarity internally.
T/F hpVgPortWireSkewError	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.4	TruthValue	read-only	This object is used to indicate that a wire skew error has been detected on this port.
I32 hpVgPortAssociatedXcvrIndex	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.5	Integer32	read-write	This object is the index into the transceiver table, hpVgXcvrTable. The transceiver entry defines which transceiver is connected to the port. This object will be set to 0 if the port is not currently associated with a transceiver
I32 hpVgPortNumAssociatedXcvrs	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.6	Integer32	read-only	This object is the number of transceivers that are currently associated with this port via the hpVgXcvrTable.
hpVgMonitor	1.3.6.1.4.1.11.2.14.11.3.2
hpVgMonitorGlobal	1.3.6.1.4.1.11.2.14.11.3.2.1
hpVgMonCounters	1.3.6.1.4.1.11.2.14.11.3.2.1.1
C32 hpVgMonGlbReadableFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.1	Counter32	read-only	This object is the total number of good frames of valid frame length that have been received on all ports in this repeater. This counter is the summation of the values of the icfVgPortReadableFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbReadableOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.2	Counter32	read-only	This object is a count of the total number of octets contained in good frames that have been received on all ports in this repeater. This counter is the summation of the values of the icfVgPortReadableOctets counter for all of the ports in this repeater. Note that this counter will roll over very quickly. It is provided for backward compatibility for Network Management protocols that do not support 64 bit counters (e.g. SNMP version 1).
C32 hpVgMonGlbUnreadableOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.3	Counter32	read-only	This object is a count of the total number of octets contained in invalid frames that have been received on all ports in this repeater. This counter is the summation of the values of icfVgPortUnreadableOctets counter for all of the ports in this repeater. Note that this counter will roll over very quickly. It is provided for backward compatibility for Network Management protocols that do not support 64 bit counters (e.g. SNMP version 1).
C32 hpVgMonGlbHighPriorityFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.4	Counter32	read-only	This object is a count of the total number of high priority frames that have been received on all ports in this repeater. This counter is a summation of the values of the icfVgPortHighPriorityFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbHighPriorityOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.5	Counter32	read-only	This object is a count of the total number of octets contained in high priority frames that have been received on all ports of this repeater. This counter is a summation of the values of the icfVgPortHighPriorityOctets counter for all of the ports in this repeater. Note that this counter will roll over very quickly. It is provided for backward compatibility for Network Management protocols that do not support 64 bit counters (e.g. SNMP version 1).
C32 hpVgMonGlbBroadcastFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.6	Counter32	read-only	This object is a count of the total number of broadcast packets that have been received on all ports in this repeater. This counter is a summation of the values of the icfVgPortBroadcastFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbMulticastFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.7	Counter32	read-only	This object is a count of the total number of multicast packets that have been received on all ports in this repeater. This counter is a summation of the values of the icfVgPortMulticastFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbIPMFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.8	Counter32	read-only	This object is a count of the total number of frames that have been received on all ports in this repeater with an invalid packet marker. This counter is a summation of the values of the icfVgPortIPMFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbDataErrorFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.9	Counter32	read-only	This object is a count of the total number of errored frames received on all ports in this repeater. This counter is a summation of the values of the icfVgPortDataErrorFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbPriorityPromotions	1.3.6.1.4.1.11.2.14.11.3.2.1.1.10	Counter32	read-only	This object is a count of the total number of times the priority promotion timer has expired on any port in this repeater. This counter is a summation of the values of the icfVgPortPriorityPromotions counter for all of the ports in this repeater.
C64 hpVgMonGlbHCReadableOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.11	Counter64	read-only	This object is a count of the total number of octets contained in good frames that have been received on all ports in this repeater. This counter is the summation of the values of the icfVgPortReadableOctets counter for all of the ports in this repeater. This counter is a 64 bit version of hpVgMonGlbReadableOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
C64 hpVgMonGlbHCUnreadableOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.12	Counter64	read-only	This object is a count of the total number of octets contained in invalid frames that have been received on all ports in this repeater. This counter is the summation of the values of icfVgPortUnreadableOctets counter for all of the ports in this repeater. This counter is a 64 bit version of hpVgMonGlbUnreadableOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
C64 hpVgMonGlbHCHighPriorityOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.13	Counter64	read-only	This object is a count of the total number of octets contained in high priority frames that have been received on all ports of this repeater. This counter is a summation of the values of the icfVgPortHighPriorityOctets counter for all of the ports in this repeater. This counter is a 64 bit version of hpVgMonGlbHighPriorityOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
C64 hpVgMonGlbHCNormPriorityOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.14	Counter64	read-only	This object is a count of the total number of octets contained in normal priority frames that have been received on all ports of this repeater. This counter is a summation of the values of the icfVgPortNormPriorityOctets counter for all of the ports in this repeater. This counter is a 64 bit version of hpVgMonGlbNormPriorityOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
C32 hpVgMonGlbNormPriorityFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.15	Counter32	read-only	This object is a count of the total number of normal priority frames received on all ports in this repeater. This counter is a summation of the values of the icfVgPortNormPriorityFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbNormPriorityOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.16	Counter32	read-only	This object is a count of the total number of normal priority octets received on all ports in this repeater. This counter is a summation of the values of the icfVgPortNormPriorityOctets counter for all of the ports in this repeater.
C32 hpVgMonGlbNullAddressedFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.17	Counter32	read-only	This object is a count of the total number of null addressed packets that have been received on all ports. This counter is a summation of the values of the icfVgPortNullAddressedFrames counter for the ports in this repeater.
C32 hpVgMonGlbOversizeFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.18	Counter32	read-only	This object is a count of the total number of oversized frames that have been received on all ports. This counter is a summation of the values of the icfVgPortOversizeFrames counter for the ports in this repeater.
C32 hpVgMonGlbTransitionToTrainings	1.3.6.1.4.1.11.2.14.11.3.2.1.1.19	Counter32	read-only	This object is a count of the total number of transitions to training on all ports. This counter is a summation of the values of the icfVgPortTransitionToTrainings counter for the ports in this repeater.
hpVgMonitorGroup	1.3.6.1.4.1.11.2.14.11.3.2.2
hpVgMonitorPort	1.3.6.1.4.1.11.2.14.11.3.2.3
NTF hpVgRedundantUplinkTrap	1.3.6.1.4.1.11.2.14.12.3.0.1			An hpVgRedundantUplinkTrap is sent anytime one of the tranceivers being used in a redundant uplink transitions from one of the 'unknown', 'inUse' or 'standby' states to either the 'silent' or 'linkFailure' state. The hpVgXcvrState is the new value of the tranceiver state for the tranceiver that made the transition.
NTF hpVgLossOfActiveTrap	1.3.6.1.4.1.11.2.14.12.3.0.2			An hpVgLossOfActiveTrap is sent whenever an enabled port transitions from the active state to either the inactive or training state. The new value of the port's status is returned in the trap.

Counter32 (16)
C32 hpVgMonGlbBroadcastFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.6	Counter32	read-only	This object is a count of the total number of broadcast packets that have been received on all ports in this repeater. This counter is a summation of the values of the icfVgPortBroadcastFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbDataErrorFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.9	Counter32	read-only	This object is a count of the total number of errored frames received on all ports in this repeater. This counter is a summation of the values of the icfVgPortDataErrorFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbHighPriorityFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.4	Counter32	read-only	This object is a count of the total number of high priority frames that have been received on all ports in this repeater. This counter is a summation of the values of the icfVgPortHighPriorityFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbHighPriorityOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.5	Counter32	read-only	This object is a count of the total number of octets contained in high priority frames that have been received on all ports of this repeater. This counter is a summation of the values of the icfVgPortHighPriorityOctets counter for all of the ports in this repeater. Note that this counter will roll over very quickly. It is provided for backward compatibility for Network Management protocols that do not support 64 bit counters (e.g. SNMP version 1).
C32 hpVgMonGlbIPMFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.8	Counter32	read-only	This object is a count of the total number of frames that have been received on all ports in this repeater with an invalid packet marker. This counter is a summation of the values of the icfVgPortIPMFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbMulticastFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.7	Counter32	read-only	This object is a count of the total number of multicast packets that have been received on all ports in this repeater. This counter is a summation of the values of the icfVgPortMulticastFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbNormPriorityFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.15	Counter32	read-only	This object is a count of the total number of normal priority frames received on all ports in this repeater. This counter is a summation of the values of the icfVgPortNormPriorityFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbNormPriorityOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.16	Counter32	read-only	This object is a count of the total number of normal priority octets received on all ports in this repeater. This counter is a summation of the values of the icfVgPortNormPriorityOctets counter for all of the ports in this repeater.
C32 hpVgMonGlbNullAddressedFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.17	Counter32	read-only	This object is a count of the total number of null addressed packets that have been received on all ports. This counter is a summation of the values of the icfVgPortNullAddressedFrames counter for the ports in this repeater.
C32 hpVgMonGlbOversizeFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.18	Counter32	read-only	This object is a count of the total number of oversized frames that have been received on all ports. This counter is a summation of the values of the icfVgPortOversizeFrames counter for the ports in this repeater.
C32 hpVgMonGlbPriorityPromotions	1.3.6.1.4.1.11.2.14.11.3.2.1.1.10	Counter32	read-only	This object is a count of the total number of times the priority promotion timer has expired on any port in this repeater. This counter is a summation of the values of the icfVgPortPriorityPromotions counter for all of the ports in this repeater.
C32 hpVgMonGlbReadableFrames	1.3.6.1.4.1.11.2.14.11.3.2.1.1.1	Counter32	read-only	This object is the total number of good frames of valid frame length that have been received on all ports in this repeater. This counter is the summation of the values of the icfVgPortReadableFrames counter for all of the ports in this repeater.
C32 hpVgMonGlbReadableOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.2	Counter32	read-only	This object is a count of the total number of octets contained in good frames that have been received on all ports in this repeater. This counter is the summation of the values of the icfVgPortReadableOctets counter for all of the ports in this repeater. Note that this counter will roll over very quickly. It is provided for backward compatibility for Network Management protocols that do not support 64 bit counters (e.g. SNMP version 1).
C32 hpVgMonGlbTransitionToTrainings	1.3.6.1.4.1.11.2.14.11.3.2.1.1.19	Counter32	read-only	This object is a count of the total number of transitions to training on all ports. This counter is a summation of the values of the icfVgPortTransitionToTrainings counter for the ports in this repeater.
C32 hpVgMonGlbUnreadableOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.3	Counter32	read-only	This object is a count of the total number of octets contained in invalid frames that have been received on all ports in this repeater. This counter is the summation of the values of icfVgPortUnreadableOctets counter for all of the ports in this repeater. Note that this counter will roll over very quickly. It is provided for backward compatibility for Network Management protocols that do not support 64 bit counters (e.g. SNMP version 1).
C32 hpVgXcvrAbandonments	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.6	Counter32	read-only	The total number of times the corresponding instance of the hpVgXcvrState object has entered the 'abandoned' state. For downlink ports this object will have the value 0.
Counter64 (4)
C64 hpVgMonGlbHCHighPriorityOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.13	Counter64	read-only	This object is a count of the total number of octets contained in high priority frames that have been received on all ports of this repeater. This counter is a summation of the values of the icfVgPortHighPriorityOctets counter for all of the ports in this repeater. This counter is a 64 bit version of hpVgMonGlbHighPriorityOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
C64 hpVgMonGlbHCNormPriorityOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.14	Counter64	read-only	This object is a count of the total number of octets contained in normal priority frames that have been received on all ports of this repeater. This counter is a summation of the values of the icfVgPortNormPriorityOctets counter for all of the ports in this repeater. This counter is a 64 bit version of hpVgMonGlbNormPriorityOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
C64 hpVgMonGlbHCReadableOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.11	Counter64	read-only	This object is a count of the total number of octets contained in good frames that have been received on all ports in this repeater. This counter is the summation of the values of the icfVgPortReadableOctets counter for all of the ports in this repeater. This counter is a 64 bit version of hpVgMonGlbReadableOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
C64 hpVgMonGlbHCUnreadableOctets	1.3.6.1.4.1.11.2.14.11.3.2.1.1.12	Counter64	read-only	This object is a count of the total number of octets contained in invalid frames that have been received on all ports in this repeater. This counter is the summation of the values of icfVgPortUnreadableOctets counter for all of the ports in this repeater. This counter is a 64 bit version of hpVgMonGlbUnreadableOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
DisplayString (1)
STR hpVgEntityName	1.3.6.1.4.1.11.2.14.11.3.1.1.1	DisplayString	read-only	The local name of this 100BaseVG repeater. This is the same value as hpicfEntityName in the case where there is Distributed Management Protocol to access this device. For SNMPv1, this name is appended to the agent community name to obtain a community name to use to specify that the agent should proxy to this repeater. For example, if this agent has a community with a community name of 'public', and the value of this object is 'repeater1', the community 'public/repeater1' will specify that the agent should proxy to the public community of the repeater1 box to obtain management information about this repeater. If an agent receives a management request where the localEntity is not specified, it will default to the local repeater on which this agent is executing.
INTEGER (3)
INT hpVgNullAddrTraining	1.3.6.1.4.1.11.2.14.11.3.1.1.4	INTEGER	read-write	This object is used to control whether the repeater will allow completion of training by end-nodes using null MAC addresses. The 802.12 standard is written to disallow such training. However, some end-nodes may use this configuration at power-up before any software is loaded. If so, the user may see frequent training occurring on the repeater because of this. In addition, some end-node applications may not work when initial training fails due to the locking out of null MAC addresses. The default setting of this object is to allow null MAC addresses to train. This is recommended for most situations, despite the fact that it contradicts the 802.12 standard. For repeaters that have First Learned address security on this hub, disallowing null-address training provides the most extensive security until the ports' authorized addresses are learned. However, if this creates problems for the end-node applications, it may be necessary to instead explicitly assign the ports' authorized addresses and configure this object to allow null-address training.
INT hpVgXcvrState	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.5	INTEGER	read-only	This object is set to 'unknown' if the transceiver is not present or its status cannot be determined. 'inUse' indicates that the transceiver is currently selected for use by its associated port. 'standby' indicates the associated port is using another tranceiver, but this tranceiver could be used if needed. 'silent' indicates that the tranceiver is not detecting any tones on the link. 'linkFailure' indicates that the tranceiver was unable to train for some reason.
INT hpVgXcvrType	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.3	INTEGER	read-only	The type of physical media supported by this transceiver. One of the following values: other undefined unknown true state not known pmdMissing PMD device not attached utp4 4-pair unshielded twisted pair stp2 2-pair shielded twisted pair fibre 802.12 fibre optic cabling This object may be 'unknown' if the implementation is not capable of identifying the PMD media type, or whether or not the PMD is even present.
Integer32 (8)
I32 hpVgGrpGroupIndex	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.1	Integer32	not-accessible	The group within the repeater for which this entry contains information. This object has the same value as the corresponding instance of icfVgGroupIndex.
I32 hpVgPortAssociatedXcvrIndex	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.5	Integer32	read-write	This object is the index into the transceiver table, hpVgXcvrTable. The transceiver entry defines which transceiver is connected to the port. This object will be set to 0 if the port is not currently associated with a transceiver
I32 hpVgPortGroupIndex	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.1	Integer32	not-accessible	The group that contains the port for which this entry contains information.
I32 hpVgPortIndex	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.2	Integer32	not-accessible	The port within the group for which this entry contains information.
I32 hpVgPortNumAssociatedXcvrs	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.6	Integer32	read-only	This object is the number of transceivers that are currently associated with this port via the hpVgXcvrTable.
I32 hpVgXcvrAssociatedPort	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.4	Integer32	read-write	The port within the group that this transceiver is associated with. There may be multiple transceivers associated with a single port. Also, a transceiver may be moved between ports.
I32 hpVgXcvrGroupIndex	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.1	Integer32	not-accessible	The group within the repeater for which this entry contains information. This object has the same value as the corresponding instance of icfVgGroupIndex.
I32 hpVgXcvrIndex	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.2	Integer32	not-accessible	The transceiver within the group for which this entry contains information.
OCTET STRING (5)
OCT hpVgGrpPortsAdminStatus	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.2	OCTET STRING	read-only	The hpVgGrpPortsAdminStatus is a bit map of the state of the icfVgPortAdminStatus object for all of the ports in this group. The object has a one bit for each port for which the value of icfVgPortAdminStatus is equal to 'enabled(1)' and a zero bit for each port for which the value of icfVgPortAdminStatus is equal to 'disabled(2)'. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpVgGrpPortsCascaded	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.5	OCTET STRING	read-only	The hpVgGrpPortsCascaded is a bit map which indicates which ports in this group have trained as cascaded repeater ports. The object has a one bit for each port which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to 'active(1)'. 3. The value of the 'R' bit in the corresponding instance of the icfVgPortTrainingResult object is equal to one. The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpVgGrpPortsInTraining	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.4	OCTET STRING	read-only	The hpVgGrpPortsInTraining is a bit map which indicates which ports in this group are currently in the training state. The object has a one bit for each port which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to 'training(3)'. The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpVgGrpPortsPromiscuous	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.6	OCTET STRING	read-only	The hpVgGrpPortsPromiscuous is a bit map which indicates which ports in this group have trained for promiscuous operation. The object has a one bit for each port which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to 'active(1)'. 3. The value of the 'PP' field in the corresponding instance of the icfVgPortTrainingResult object is equal to 01. The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
OCT hpVgGrpPortsTrained	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.3	OCTET STRING	read-only	The hpVgGrpPortsTrained is a bit map which indicates which ports in this group are currently online. The object has a one bit for each port for which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to 'active(1)'. The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
TruthValue (4)
T/F hpVgPortPolarityReversed	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.3	TruthValue	read-only	This object is used to indicate that the hub port was wired with the positive/negative polarity of its wire pairs reversed. Note that the port will continue to operate in this state, with the hub inverting the polarity internally.
T/F hpVgPortWireSkewError	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.4	TruthValue	read-only	This object is used to indicate that a wire skew error has been detected on this port.
T/F hpVgRedundantUpLinksFlag	1.3.6.1.4.1.11.2.14.11.3.1.1.2	TruthValue	read-write	This object is used to indicate that the hub is configured with redundant uplink ports.
T/F hpVgXcvrIsMovable	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.7	TruthValue	read-only	A true value indicates that the transceiver can be associated with a single port from a set of multiple ports. A false value indicates that a transceiver can only be associated with a single, fixed, port
No type (31)
hpicfVgRptrBasicGroup	1.3.6.1.4.1.11.2.14.10.2.11.1.2.2			HP specific extensions to the 802.12 Repeater MIB providing status and configuration of 802.12 repeaters.
hpicfVgRptrBasicTraps	1.3.6.1.4.1.11.2.14.10.2.11.1.2.7			A collection of notifications used to indicate port status changes on 802.12 repeaters.
hpicfVgRptrCompliance	1.3.6.1.4.1.11.2.14.10.2.11.1.1.2			The compliance statement for HP 802.12 repeaters.
hpicfVgRptrCompliances	1.3.6.1.4.1.11.2.14.10.2.11.1.1
hpicfVgRptrConformance	1.3.6.1.4.1.11.2.14.10.2.11.1
hpicfVgRptrGroups	1.3.6.1.4.1.11.2.14.10.2.11.1.2
hpicfVgRptrMib	1.3.6.1.4.1.11.2.14.10.2.11			This MIB module contains objects that provide HP-specific extensions to the 802.12 Repeater MIB.
hpicfVgRptrMonitorGroup	1.3.6.1.4.1.11.2.14.10.2.11.1.2.4			HP specific extensions to the 802.12 Repeater MIB providing global counters for 802.12 repeaters.
hpicfVgRptrPreDot12BasicGroup	1.3.6.1.4.1.11.2.14.10.2.11.1.2.1			******* THIS GROUP IS OBSOLETE ******* HP specific extensions to the 802.12 Repeater MIB providing status and configuration of pre-standard 802.12 repeaters.
hpicfVgRptrPreDot12Compliance	1.3.6.1.4.1.11.2.14.10.2.11.1.1.1			******* THIS COMPLIANCE IS OBSOLETE ******* The compliance statement for pre-standard HP 100VG repeaters.
hpicfVgRptrPreDot12MonitorGroup	1.3.6.1.4.1.11.2.14.10.2.11.1.2.3			******* THIS GROUP IS OBSOLETE ******* HP specific extensions to the 802.12 Repeater MIB providing global counters for pre-standard 802.12 repeaters.
hpicfVgRptrRedundantUplinkGroup	1.3.6.1.4.1.11.2.14.10.2.11.1.2.6			A collection of objects for configuring redundant uplinks on 802.12 repeaters.
hpicfVgRptrRedundantUplinkTraps	1.3.6.1.4.1.11.2.14.10.2.11.1.2.8			A collection of notifications used to indicate status changes on the redundant uplinks on 802.12 repeaters.
hpicfVgRptrXcvrGroup	1.3.6.1.4.1.11.2.14.10.2.11.1.2.5			A collection of objects for configuring and monitoring tranceivers on 802.12 repeaters.
hpVgBasic	1.3.6.1.4.1.11.2.14.11.3.1
hpVgBasicGlobal	1.3.6.1.4.1.11.2.14.11.3.1.1
hpVgBasicGroup	1.3.6.1.4.1.11.2.14.11.3.1.2
hpVgBasicGroupEntry	1.3.6.1.4.1.11.2.14.11.3.1.2.1.1		not-accessible	An entry in the table, containing HP extensions for a specific group.
hpVgBasicGroupTable	1.3.6.1.4.1.11.2.14.11.3.1.2.1		not-accessible	HP specific extensions to the vgBasicGroupTable.
hpVgBasicPort	1.3.6.1.4.1.11.2.14.11.3.1.3
hpVgBasicPortEntry	1.3.6.1.4.1.11.2.14.11.3.1.3.1.1		not-accessible	HP extended information about a specific vg port.
hpVgBasicPortTable	1.3.6.1.4.1.11.2.14.11.3.1.3.1		not-accessible	HP specific extensions to the vg port table.
NTF hpVgLossOfActiveTrap	1.3.6.1.4.1.11.2.14.12.3.0.2			An hpVgLossOfActiveTrap is sent whenever an enabled port transitions from the active state to either the inactive or training state. The new value of the port's status is returned in the trap.
hpVgMonCounters	1.3.6.1.4.1.11.2.14.11.3.2.1.1
hpVgMonitor	1.3.6.1.4.1.11.2.14.11.3.2
hpVgMonitorGlobal	1.3.6.1.4.1.11.2.14.11.3.2.1
hpVgMonitorGroup	1.3.6.1.4.1.11.2.14.11.3.2.2
hpVgMonitorPort	1.3.6.1.4.1.11.2.14.11.3.2.3
NTF hpVgRedundantUplinkTrap	1.3.6.1.4.1.11.2.14.12.3.0.1			An hpVgRedundantUplinkTrap is sent anytime one of the tranceivers being used in a redundant uplink transitions from one of the 'unknown', 'inUse' or 'standby' states to either the 'silent' or 'linkFailure' state. The hpVgXcvrState is the new value of the tranceiver state for the tranceiver that made the transition.
hpVgXcvrEntry	1.3.6.1.4.1.11.2.14.11.3.1.1.3.1		not-accessible	An entry in the transceiver table
hpVgXcvrTable	1.3.6.1.4.1.11.2.14.11.3.1.1.3		not-accessible	A table containing information about transceivers. All uplink, downlink, and redundent links are represented in this table

RFC description

Manages HP 100VG repeater platform with extensions for 802.12 Ethernet repeater monitoring.

Start monitoring HP 100VG-AnyLAN repeater/concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HP-ICF-VG-RPTR

This MIB depends on

Related MIBs

What Is HP-ICF-VG-RPTR?

What Can Be Monitored

Supported Devices

Monitoring Examples

RFC description