INTEL-LAN-ADAPTERS-MIB-3

All MIBs › INTEL-LAN-ADAPTERS-MIB-3

Category: Network Interfaces, Vendor: Intel

Description: Intel LAN adapter version 3 MIB providing further enhanced SNMP objects for Intel Ethernet NIC teaming and advanced features.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is INTEL-LAN-ADAPTERS-MIB-3?

INTEL-LAN-ADAPTERS-MIB-3 is a vendor-specific MIB from Intel Corporation (version 3) for managing Intel Ethernet network interface adapters, including advanced NIC teaming/bonding features. It belongs to the network interface card/driver-level hardware management category. It exposes basic agent/version identification objects (company, description, operatingSystem, mibVersionSupported, agentExtensionVersion) alongside a generic adapter attributes table describing each installed adapter's identity and type. Its primary monitoring value is tracking the software/hardware status of installed NICs - which adapters are present, their type, driver/agent version, and overall status - helping administrators confirm the correct driver/agent version is running and that all expected adapters are recognized by the OS. It has no significant dependency on other SNMP MIBs beyond standard enterprise-tree conventions, and is deployed on Windows or NetWare servers/workstations fitted with Intel Ethernet adapters, particularly in environments using Intel's adapter teaming software. Engineers can download the INTEL-LAN-ADAPTERS-MIB-3 file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in INTEL-LAN-ADAPTERS-MIB-3. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Intel Ethernet network interface card (NIC)
server/workstation with Intel LAN adapters
Intel Ethernet network adapters/NICs (Advanced Network Services / PROSet teaming agent)

Monitoring Examples

An administrator can poll genericAdaptersAttrTable/genericAdapterAttrEntry, using adapterIndex to enumerate installed cards and reading adapterName and adapterType to confirm which Intel NIC models are present and correctly identified by the driver. Checking mibVersionSupported and agentExtensionVersion against expected values would reveal an out-of-date SNMP agent extension after a driver upgrade, and the top-level status object gives a quick agent-health check.

What Can Be Monitored

installed adapter name/type
adapter index/enumeration
agent/driver version
agent extension version
overall adapter status

Imported Objects

From RFC1155-SMI

Counter
Gauge
IpAddress
TimeTicks
enterprises

From RFC1212-MIB

OBJECT-TYPE

From RFC1215-MIB

TRAP-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
CTR adapterCollisions	1.3.6.1.4.1.343.2.7.2.2.1.3.1.10	Counter	read-only	Total number of single collisions.
STR adapterDriverDate	1.3.6.1.4.1.343.2.7.2.2.1.2.1.5	DisplayString	read-only	Adapter driver creation date (in mm/dd/yy format).
STR adapterDriverInfo	1.3.6.1.4.1.343.2.7.2.2.1.2.1.2	DisplayString	read-only	Additional information about the adapter. Includes name of the NIC.
INT adapterDriverLoadStatus	1.3.6.1.4.1.343.2.7.2.2.1.1.1.4	INTEGER	read-only	Load status of the driver: -'loaded' if the driver is loaded on the NIC; 'notLoaded' otherwise. A status of 'notLoaded' means that the NIC is missing (via 'hotRemove') or the driver is not fully loaded for some reason.
STR adapterDriverName	1.3.6.1.4.1.343.2.7.2.2.1.2.1.1	DisplayString	read-only	Name of the adapter driver.
STR adapterDriverPath	1.3.6.1.4.1.343.2.7.2.2.1.2.1.4	DisplayString	read-only	Adapter driver path name.
STR adapterDriverSize	1.3.6.1.4.1.343.2.7.2.2.1.2.1.6	DisplayString	read-only	Adapter driver file size.
STR adapterDriverVersion	1.3.6.1.4.1.343.2.7.2.2.1.2.1.3	DisplayString	read-only	Adapter driver version number.
NUM adapterIndex	1.3.6.1.4.1.343.2.7.2.2.1.1.1.1	InterfaceIndex	read-only	A unique value, greater than or equal to zero, for each interface.
STR adapterIpAddress	1.3.6.1.4.1.343.2.7.2.2.1.2.1.7	DisplayString	read-only	Adapter IP address
STR adapterName	1.3.6.1.4.1.343.2.7.2.2.1.1.1.2	DisplayString	read-only	Name of the adapter interface. There is a unique name for each instance.
CTR adapterRxBytes	1.3.6.1.4.1.343.2.7.2.2.1.3.1.3	Counter	read-only	Total number of bytes received.
CTR adapterRxDropped	1.3.6.1.4.1.343.2.7.2.2.1.3.1.7	Counter	read-only	Total number of receive packets dropped due to overrun.
CTR adapterRxErrors	1.3.6.1.4.1.343.2.7.2.2.1.3.1.5	Counter	read-only	Total number of packets received with errors (packets that failed to reach the protocol).
CTR adapterRxMulticast	1.3.6.1.4.1.343.2.7.2.2.1.3.1.9	Counter	read-only	Total number of Multicast packets received.
CTR adapterRxPackets	1.3.6.1.4.1.343.2.7.2.2.1.3.1.1	Counter	read-only	Total number of packets received.
adaptersTables	1.3.6.1.4.1.343.2.7.2.2
CTR adapterTxBytes	1.3.6.1.4.1.343.2.7.2.2.1.3.1.4	Counter	read-only	Total number of bytes transmitted.
CTR adapterTxDropped	1.3.6.1.4.1.343.2.7.2.2.1.3.1.8	Counter	read-only	Total number of transmit packets dropped due to successive collisions.
CTR adapterTxErrors	1.3.6.1.4.1.343.2.7.2.2.1.3.1.6	Counter	read-only	Total number of packets that failed to transmit.
CTR adapterTxPackets	1.3.6.1.4.1.343.2.7.2.2.1.3.1.2	Counter	read-only	Total number of packets transmitted.
INT adapterType	1.3.6.1.4.1.343.2.7.2.2.1.1.1.3	INTEGER	read-only	Type of adapter (member, stand-alone, or virtual).
STR agentExtensionVersion	1.3.6.1.4.1.343.2.7.2.1.6	DisplayString	read-only	Version of the SNMP extension agent.
NTF ansAddedTrap	1.3.6.1.4.1.343.2.7.2.3.3.1.0.8			Team has been added.
ansAttrEntry	1.3.6.1.4.1.343.2.7.2.2.4.1.1		not-accessible	ANS attributes. There is one 'entry' for each team
ansAttrTable	1.3.6.1.4.1.343.2.7.2.2.4.1		not-accessible	ANS attributes.
ansAttrTables	1.3.6.1.4.1.343.2.7.2.2.4
ansEvents	1.3.6.1.4.1.343.2.7.2.3.3
INT ansId	1.3.6.1.4.1.343.2.7.2.2.4.1.1.1	INTEGER	read-only	ANS ID. A unique value.
INT ansMemberAnsId	1.3.6.1.4.1.343.2.7.2.2.5.1.1.2	INTEGER	read-only	ID of the ANS to which the Adapter belongs.
ansMemberAttrEntry	1.3.6.1.4.1.343.2.7.2.2.5.1.1		not-accessible	Attributes common to all iANS-TeamMember Adapters. There is one 'entry' for each team member adapter.
NUM ansMemberIndex	1.3.6.1.4.1.343.2.7.2.2.5.1.1.1	InterfaceIndex	read-only	A unique value for each member. The value is non-negative and identical to the value of the physical adapter associated with this member.
ansMembersAttrTable	1.3.6.1.4.1.343.2.7.2.2.5.1		not-accessible	Attributes common to all iANS-TeamMember Adapters.
ansMembersAttrTables	1.3.6.1.4.1.343.2.7.2.2.5
INT ansNumberOfMembers	1.3.6.1.4.1.343.2.7.2.2.4.1.1.2	INTEGER	read-only	Number of member adapters in the team.
INT ansNumberOfVirtualAdapters	1.3.6.1.4.1.343.2.7.2.2.4.1.1.3	INTEGER	read-only	Number of virtual adapters in the team.
NTF ansRemovedTrap	1.3.6.1.4.1.343.2.7.2.3.3.1.0.9			Team has been removed.
INT ansTeamAggrSelectionMode	1.3.6.1.4.1.343.2.7.2.2.4.3.1.14	INTEGER	read-only	Indicates aggregation selection mode when in IEEE 802.3AD mode.
ansTeamAttrEntry	1.3.6.1.4.1.343.2.7.2.2.4.3.1		not-accessible	ANS team attributes. Appears only when adapter teaming exist. There is one 'entry' for each team.
INT ansTeamCurrentPrimaryIndex	1.3.6.1.4.1.343.2.7.2.2.4.3.1.10	INTEGER	read-only	Index of the current primary member adapter.
CTR ansTeamFailoverCounter	1.3.6.1.4.1.343.2.7.2.2.4.3.1.12	Counter	read-write	Failover counter - that is, the number of failovers the team suffered. This value can be reset by the user - that is, it can be set to zero only; no other value is permitted.
NTF ansTeamFailoverTrap	1.3.6.1.4.1.343.2.7.2.3.3.1.0.7			The primary team member has been changed.
INT ansTeamLinkState	1.3.6.1.4.1.343.2.7.2.2.4.3.1.3	INTEGER	read-only	Team link state. Aggregation of the link state of all team members ( 0 = some up).
INT ansTeamLoadBalanceRefresh	1.3.6.1.4.1.343.2.7.2.2.4.3.1.7	INTEGER	read-only	In seconds. If available, the number of seconds that passes before the software resets or refreshes the current load across team members.
ansTeamMemberAttrEntry	1.3.6.1.4.1.343.2.7.2.2.5.2.1		not-accessible	Attributes of iANS-TeamMember Adapters related to adapter teaming. Appears only if adapter teaming exists.
CTR ansTeamMemberFailureCounter	1.3.6.1.4.1.343.2.7.2.2.5.2.1.2	Counter	read-write	Failure counter - that is, the number of failovers from this member. This value can be reset by the user - that is, it can be set to zero only; no other value is permitted.
INT ansTeamMemberPriority	1.3.6.1.4.1.343.2.7.2.2.5.2.1.3	INTEGER	read-only	Priority of the team member.
ansTeamMembersAttrTable	1.3.6.1.4.1.343.2.7.2.2.5.2		not-accessible	Attributes common to all iANS-TeamMember Adapters.
INT ansTeamMemberState	1.3.6.1.4.1.343.2.7.2.2.5.2.1.1	INTEGER	read-only	iANS-TeamMember adapter state.
INT ansTeamMode	1.3.6.1.4.1.343.2.7.2.2.4.3.1.2	INTEGER	read-only	Team mode.
STR ansTeamName	1.3.6.1.4.1.343.2.7.2.2.4.3.1.1	DisplayString	read-only	Unique ANS team name
INT ansTeamPreferredPrimaryIndex	1.3.6.1.4.1.343.2.7.2.2.4.3.1.9	INTEGER	read-only	Index of the preferred primary member adapter.
INT ansTeamPreviousPrimaryIndex	1.3.6.1.4.1.343.2.7.2.2.4.3.1.11	INTEGER	read-only	Index of the previous primary member adapter.
INT ansTeamProbesMode	1.3.6.1.4.1.343.2.7.2.2.4.3.1.6	INTEGER	read-only	Mode of probe usage.
INT ansTeamProbesSendTime	1.3.6.1.4.1.343.2.7.2.2.4.3.1.8	INTEGER	read-only	In seconds. If available, the interval in seconds during which probe packets are sent.
INT ansTeamProbesState	1.3.6.1.4.1.343.2.7.2.2.4.3.1.5	INTEGER	read-only	If enabled, the ANS uses probes to check on its members.
INT ansTeamRlbSupport	1.3.6.1.4.1.343.2.7.2.2.4.3.1.15	INTEGER	read-only	Indicates whether 'receive load balancing support' is enabled when in AdaptiveLoadBalancing teaming mode. (If disabled, only the transmission is balanced.)
ansTeamsAttrTable	1.3.6.1.4.1.343.2.7.2.2.4.3		not-accessible	ANS team attributes.
INT ansTeamSlaCompatible	1.3.6.1.4.1.343.2.7.2.2.4.3.1.13	INTEGER	read-only	Indicates compatibility with Static Link Aggregation mode when in IEEE 802.3AD mode.
GAU ansTeamSpeed	1.3.6.1.4.1.343.2.7.2.2.4.3.1.4	Gauge	read-only	Team speed.Speed of the current primary member (in Mbps).
INT ansTrapEnable	1.3.6.1.4.1.343.2.7.2.3.3.2	INTEGER	read-write	Indicates whether team traps are enabled. The user can set this value.
ansTraps	1.3.6.1.4.1.343.2.7.2.3.3.1
ansVlanAttrEntry	1.3.6.1.4.1.343.2.7.2.2.4.2.1		not-accessible	ANS VLAN attributes. Appears only if VLAN is active. There is one 'entry' for each Vlan.
INT ansVlanGvrpSupport	1.3.6.1.4.1.343.2.7.2.2.4.2.1.2	INTEGER	read-only	Indicates whether GVRP is enabled.
ansVlansAttrTable	1.3.6.1.4.1.343.2.7.2.2.4.2		not-accessible	ANS attributes.
INT ansVlanTaggingType	1.3.6.1.4.1.343.2.7.2.2.4.2.1.1	INTEGER	read-only	Tagging type of the VLAN adapter.
STR company	1.3.6.1.4.1.343.2.7.2.1.1	DisplayString	read-only	Company that provided this MIB - Intel(R) Corporation.
component_description	1.3.6.1.4.1.343.2.7.2.1
STR description	1.3.6.1.4.1.343.2.7.2.1.2	DisplayString	read-only	Description of this component - Intel(R) Network Adapter(s), Advanced Management.
events	1.3.6.1.4.1.343.2.7.2.3
genericAdapterAttrEntry	1.3.6.1.4.1.343.2.7.2.2.1.1.1		not-accessible	Attributes common to all kinds of adapters. There is one 'entry' for each physical or virtual adapter.
genericAdapterDriverAttrEntry	1.3.6.1.4.1.343.2.7.2.2.1.2.1		not-accessible	Attributes common to all kinds of adapter drivers. There is one 'entry' for each adapter driver
genericAdaptersAttrTable	1.3.6.1.4.1.343.2.7.2.2.1.1		not-accessible	Attributes common to all kinds of adapters.
genericAdaptersAttrTables	1.3.6.1.4.1.343.2.7.2.2.1
genericAdaptersDriversAttrTable	1.3.6.1.4.1.343.2.7.2.2.1.2		not-accessible	Attributes common to all kinds of adapter drivers.
genericAdaptersTrafficStatsAttrTable	1.3.6.1.4.1.343.2.7.2.2.1.3		not-accessible	Traffic stats common to all kinds of adapters.
genericAdapterTrafficStatsAttrEntry	1.3.6.1.4.1.343.2.7.2.2.1.3.1		not-accessible	Traffic stats common to all kinds of adapters. There is one 'entry' for each adapter instance.
intel	1.3.6.1.4.1.343
intel_lan_adapters	1.3.6.1.4.1.343.2.7.2
STR mibVersion1_4_3	1.3.6.1.4.1.343.2.7.2.1.4	DisplayString	read-only	Version of this MIB - the empty string is always returned.
STR mibVersionSupported	1.3.6.1.4.1.343.2.7.2.1.5	DisplayString	read-only	Version of the MIB supported by the agent. 1.x.y indicates that every MIB version of that template is supported by the agent.
nic_products	1.3.6.1.4.1.343.2.7
STR operatingSystem	1.3.6.1.4.1.343.2.7.2.1.3	DisplayString	read-only	Operating System of the server on which the SNMP agent is executed.
physicalAdapterAttrEntry	1.3.6.1.4.1.343.2.7.2.2.2.1.1		not-accessible	Attributes common to all Physical Adapters. There is one 'entry' for each standalone or member adapter.
physicalAdapterAttrOffloadEntry	1.3.6.1.4.1.343.2.7.2.2.2.2.1		not-accessible	Attributes of offloading-enabled physical adapters. There is one 'entry' for each SNMP-compliant physical adapter.
INT physicalAdapterAutoNegotiation	1.3.6.1.4.1.343.2.7.2.2.2.1.1.6	INTEGER	read-only	Physical adapter autonegotiation mode. This value appears only if it is available - that is, only if the driver is compliant with SNMP; otherwise, NO_SUCH_NAME is returned.
PHY physicalAdapterCurrentNA	1.3.6.1.4.1.343.2.7.2.2.2.1.1.10	PhysAddress	read-only	Current MAC address of the physical adapter(in hex notation).
INT physicalAdapterDplxMode	1.3.6.1.4.1.343.2.7.2.2.2.1.1.5	INTEGER	read-only	Physical Adapter Duplex Mode. Appears only for an SNMP-compliant adapter with link up.
INT physicalAdapterExpressTeamBundleId	1.3.6.1.4.1.343.2.7.2.2.2.1.1.14	INTEGER	read-only	Unique value to identify the express team in the system.
INT physicalAdapterExpressTeamed	1.3.6.1.4.1.343.2.7.2.2.2.1.1.13	INTEGER	read-only	Physical Adapter Express team status. Appears only for an adapter with express teaming capability.
NUM physicalAdapterIndex	1.3.6.1.4.1.343.2.7.2.2.2.1.1.1	InterfaceIndex	read-only	A unique value, greater than or equal to zero, for each interface.
INT physicalAdapterIpv4RxChecksumOffLoadEnable	1.3.6.1.4.1.343.2.7.2.2.2.2.1.4	INTEGER	read-only	When enabled, IPv4 for 'receive' checksums are performed in hardware.
INT physicalAdapterIpv4TCPSegmentationOffLoadEnable	1.3.6.1.4.1.343.2.7.2.2.2.2.1.6	INTEGER	read-only	When enabled, TCP Segmentation is performed in hardware.
INT physicalAdapterIpv4TxChecksumOffLoadEnable	1.3.6.1.4.1.343.2.7.2.2.2.2.1.5	INTEGER	read-only	When enabled, IPv4 for 'receive' checksums are performed in hardware.
INT physicalAdapterIrq	1.3.6.1.4.1.343.2.7.2.2.2.1.1.9	INTEGER	read-only	Physical adapter Interrupt Request number.
INT physicalAdapterLinkStatus	1.3.6.1.4.1.343.2.7.2.2.2.1.1.2	INTEGER	read-only	Physical adapter link status. Appears only if available - that is, only if the driver is compliant with SNMP; otherwise, NO_SUCH_NAME is returned.
CTR physicalAdapterLinkStatusChangesCounter	1.3.6.1.4.1.343.2.7.2.2.2.1.1.3	Counter	read-write	Number of changes in physical adapter link status. Any change ('up-to-down' or 'down- to-up') is counted. This value can be reset (to zero) by the user; no other value is permitted. This value appears only if it is available - that is, only if the driver is compliant with SNMP; otherwise, NO_SUCH_NAME is returned.
INT physicalAdapterOnlineDiagStatus	1.3.6.1.4.1.343.2.7.2.2.2.1.1.12	INTEGER	read-only	The Online Diagnostics Status of the Physical Adapter. Online Diagnostics consist of Link Test and other Hardware Tests.
INT physicalAdapterPciBus	1.3.6.1.4.1.343.2.7.2.2.2.1.1.7	INTEGER	read-only	Physical adapter PCI bus number.
INT physicalAdapterPciSlot	1.3.6.1.4.1.343.2.7.2.2.2.1.1.8	INTEGER	read-only	Physical adapter PCI slot number.
PHY physicalAdapterPermanentNA	1.3.6.1.4.1.343.2.7.2.2.2.1.1.11	PhysAddress	read-only	Permanent MAC address of the physical adapter(in hex notation).
physicalAdaptersAttrOffloadTable	1.3.6.1.4.1.343.2.7.2.2.2.2		not-accessible	Attributes of offloading-enabled physical adapters. There is one 'entry' for each SNMP-compliant physical adapter.
physicalAdaptersAttrTable	1.3.6.1.4.1.343.2.7.2.2.2.1		not-accessible	Attributes common to all Physical Adapters.
physicalAdaptersAttrTables	1.3.6.1.4.1.343.2.7.2.2.2
GAU physicalAdapterSpeed	1.3.6.1.4.1.343.2.7.2.2.2.1.1.4	Gauge	read-only	Physical adapter speed (in Mbps). Appears only for an SNMP-compliant adapter with link up.
CTR physicalAdapterTcpRxChecksumBad	1.3.6.1.4.1.343.2.7.2.2.2.2.1.2	Counter	read-only	Number of bad 'receive' checksums.
INT physicalAdapterTcpRxChecksumOffLoadEnable	1.3.6.1.4.1.343.2.7.2.2.2.2.1.1	INTEGER	read-only	When enabled, TCP for 'receive' checksums are performed in hardware.
INT physicalAdapterTcpTxChecksumOffLoadEnable	1.3.6.1.4.1.343.2.7.2.2.2.2.1.3	INTEGER	read-only	When enabled, TCP for 'transmit' checksums are performed in hardware.
products	1.3.6.1.4.1.343.2
INT status	1.3.6.1.4.1.343.2.7.2.1.7	INTEGER	read-only	Indicates status and functionality of the adapter(s) - whether the base driver and ANS are loaded.
INT virtualAdapterAnsId	1.3.6.1.4.1.343.2.7.2.2.3.1.1.2	INTEGER	read-only	ID of the team to which the adapter belongs.
virtualAdapterAttrEntry	1.3.6.1.4.1.343.2.7.2.2.3.1.1		not-accessible	Attributes common to all iANS-virtual adapters. There is one 'entry' for each virtual adapter
NUM virtualAdapterIndex	1.3.6.1.4.1.343.2.7.2.2.3.1.1.1	InterfaceIndex	read-only	A unique value, greater than or equal to zero, for each interface.
virtualAdaptersAttrTable	1.3.6.1.4.1.343.2.7.2.2.3.1		not-accessible	Attributes common to all iANS-virtual adapters.
virtualAdaptersAttrTables	1.3.6.1.4.1.343.2.7.2.2.3
virtualAdaptersVlanAttrTable	1.3.6.1.4.1.343.2.7.2.2.3.2		not-accessible	Attributes common to all iANS-virtual adapters VLANs.
virtualAdapterVlanAttrEntry	1.3.6.1.4.1.343.2.7.2.2.3.2.1		not-accessible	VLAN attributes.Appears for virtual adapters that support VLANs only. There is one 'entry' for each VLAN.
INT virtualAdapterVlanId	1.3.6.1.4.1.343.2.7.2.2.3.2.1.1	INTEGER	read-only	ID for this virtual adapter VLAN.

RFC description

Intel Network Adapter advanced management information base for LAN interface monitoring.

Start monitoring Intel Ethernet network adapters/NICs with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download INTEL-LAN-ADAPTERS-MIB-3

What Is INTEL-LAN-ADAPTERS-MIB-3?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description