A3COM-HUAWEI-3GMODEM-MIB

All MIBs › A3COM-HUAWEI-3GMODEM-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2009-04-30

Category: Network Interfaces, Vendor: H3C/HH3C

Description: Manages 3G modem interfaces on H3C devices, providing connection status, signal quality, and data counters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is A3COM-HUAWEI-3GMODEM-MIB?

A3COM-HUAWEI-3GMODEM-MIB is a joint 3Com/H3C (Huawei-3Com) enterprise MIB for managing 3G wireless WAN cards and their UIM (a SIM-like User Identification Module) inserted into H3C routers and switches. It exposes an inventory table of installed wireless cards, including model name, manufacturer, description, serial number, hardware/firmware version, and PRL (Preferred Roaming List) version, tied to the router interface the card serves. Monitoring focus is on hardware and software identity/version status: administrators verify the correct card model, firmware version, and PRL version are installed and check the associated interface index to correlate the modem with its logical WAN interface. It is a proprietary H3C extension, not based on a shared IETF cellular-modem MIB standard. Deployment context is enterprise branch routers using inserted 3G wireless WAN cards as a backup or primary uplink. Engineers can download the A3COM-HUAWEI-3GMODEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-3GMODEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C (3Com/Huawei-3Com) router with 3G wireless WAN card

Monitoring Examples

An admin polls h3cWirelessCardTable indexed by h3cWirelessCardIndex to read h3cWirelessCardFirmwareVersion and h3cWirelessCardPRLVersion, confirming the installed card's firmware and roaming list are current. h3cWirelessCardInterfaceIndex ties the card to its logical WAN interface so an operator can correlate modem inventory (h3cWirelessCardModelName, h3cWirelessCardSerialNumber) with the interface's up/down state.

What Can Be Monitored

wireless card model/manufacturer
hardware/firmware version
PRL version
serial number
associated interface index

Imported Objects

From A3COM-HUAWEI-OID-MIB

h3cCommon

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using h3cWirelessCardModemStatus OID:

Select an H3C router with a 3G WAN card as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type h3cWirelessCardModemStatus into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The status of modem. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is anything other than 'onLine', since that indicates the condition this object reports has changed to one worth investigating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3c3GCdma	1.3.6.1.4.1.43.45.1.10.2.98.1.3
I32 h3c3GCdma1xRttCurrentRssi	1.3.6.1.4.1.43.45.1.10.2.98.1.3.1.1.1	Integer32	read-only	The Received Signal Strength Indicator(RSSI) of CDMA 1xRTT.
h3c3GCdma1xRttEntry	1.3.6.1.4.1.43.45.1.10.2.98.1.3.1.1		not-accessible	An entry of h3c3GCdma1xRttTable.
I32 h3c3GCdma1xRttRssiMediumThreshold	1.3.6.1.4.1.43.45.1.10.2.98.1.3.1.1.2	Integer32	read-write	The medium signal threshold of CMDA 1xRTT RSSI. The absolute value of h3c3GCdma1xRttRssiMediumThreshold should be less than or equal to the absolute value of h3c3GCdma1xRttRssiWeakThreshold. (\|h3c3GCdma1xRttRssiMediumThreshold\| <= \|h3c3GCdma1xRttRssiWeakThreshold\|).
I32 h3c3GCdma1xRttRssiWeakThreshold	1.3.6.1.4.1.43.45.1.10.2.98.1.3.1.1.3	Integer32	read-write	The weak signal threshold of CMDA 1xRTT RSSI. The absolute value of h3c3GCdma1xRttRssiMediumThreshold should be less than or equal to the absolute value of h3c3GCdma1xRttRssiWeakThreshold. (\|h3c3GCdma1xRttRssiMediumThreshold\| <= \|h3c3GCdma1xRttRssiWeakThreshold\|).
h3c3GCdma1xRttTable	1.3.6.1.4.1.43.45.1.10.2.98.1.3.1		not-accessible	CDMA 1xRTT table.
I32 h3c3GCdmaEvDoCurrentRssi	1.3.6.1.4.1.43.45.1.10.2.98.1.3.2.1.1	Integer32	read-only	The Received Signal Strength Indicator(RSSI) of CDMA EvDo.
h3c3GCdmaEvDoEntry	1.3.6.1.4.1.43.45.1.10.2.98.1.3.2.1		not-accessible	An entry of h3c3GCdmaEvDoTable.
I32 h3c3GCdmaEvDoRssiMediumThreshold	1.3.6.1.4.1.43.45.1.10.2.98.1.3.2.1.2	Integer32	read-write	The medium signal threshold of CMDA EvDo RSSI. The absolute value of h3c3GCdmaEvDoRssiMediumThreshold should be less than or equal to the absolute value of h3c3GCdmaEvDoRssiWeakThreshold. (\|h3c3GCdmaEvDoRssiMediumThreshold\| <= \|h3c3GCdmaEvDoRssiWeakThreshold\|).
I32 h3c3GCdmaEvDoRssiWeakThreshold	1.3.6.1.4.1.43.45.1.10.2.98.1.3.2.1.3	Integer32	read-write	The weak signal threshold of CMDA EvDo RSSI. The absolute value of h3c3GCdmaEvDoRssiMediumThreshold should be less than or equal to the absolute value of h3c3GCdmaEvDoRssiWeakThreshold. (\|h3c3GCdmaEvDoRssiMediumThreshold\| <= \|h3c3GCdmaEvDoRssiWeakThreshold\|).
h3c3GCdmaEvDoTable	1.3.6.1.4.1.43.45.1.10.2.98.1.3.2		not-accessible	CDMA EvDo table.
I32 h3c3GCurrentRssiBind	1.3.6.1.4.1.43.45.1.10.2.98.2.5	Integer32	accessible-for-notify	The current RSSI which binded in the notifications.
INT h3c3GCurrentService	1.3.6.1.4.1.43.45.1.10.2.98.2.4	INTEGER	accessible-for-notify	The current service type which binded in the notifications.
h3c3GGsm	1.3.6.1.4.1.43.45.1.10.2.98.1.4
STR h3c3GGsmApn	1.3.6.1.4.1.43.45.1.10.2.98.1.4.1.1.6	SnmpAdminString	read-write	The Access Point Name(APN) of GSM.
STR h3c3GGsmCellId	1.3.6.1.4.1.43.45.1.10.2.98.1.4.1.1.11	SnmpAdminString	read-only	The ID of cell.
I32 h3c3GGsmCurrentRssi	1.3.6.1.4.1.43.45.1.10.2.98.1.4.1.1.1	Integer32	read-only	The Received Signal Strength Indicator(RSSI) of GSM.
STR h3c3GGsmImei	1.3.6.1.4.1.43.45.1.10.2.98.1.4.1.1.5	SnmpAdminString	read-only	The International Mobile Equipment Identity(IMEI) of GSM.
STR h3c3GGsmImsi	1.3.6.1.4.1.43.45.1.10.2.98.1.4.1.1.4	SnmpAdminString	read-only	The International Mobile Subscriber Identity(IMSI) of GSM.
h3c3GGsmInfoEntry	1.3.6.1.4.1.43.45.1.10.2.98.1.4.1.1		not-accessible	An entry of h3c3GGsmInfoTable.
h3c3GGsmInfoTable	1.3.6.1.4.1.43.45.1.10.2.98.1.4.1		not-accessible	GSM information table.
STR h3c3GGsmLac	1.3.6.1.4.1.43.45.1.10.2.98.1.4.1.1.10	SnmpAdminString	read-only	The Location Area Code(LAC) of GSM.
STR h3c3GGsmMobileNetworkName	1.3.6.1.4.1.43.45.1.10.2.98.1.4.1.1.9	SnmpAdminString	read-only	The mobile network name of GSM.
INT h3c3GGsmNetworkSelectionMode	1.3.6.1.4.1.43.45.1.10.2.98.1.4.1.1.8	INTEGER	read-only	The network selection mode of GSM.
INT h3c3GGsmPacketSessionStatus	1.3.6.1.4.1.43.45.1.10.2.98.1.4.1.1.7	INTEGER	read-only	The packet session status of GSM.
I32 h3c3GGsmRssiMediumThreshold	1.3.6.1.4.1.43.45.1.10.2.98.1.4.1.1.2	Integer32	read-write	The medium signal threshold of GSM RSSI. The absolute value of h3c3GGsmRssiMediumThreshold should be less than or equal to the absolute value of h3c3GGsmRssiWeakThreshold. (\|h3c3GGsmRssiMediumThreshold\| <= \|h3c3GGsmRssiWeakThreshold\|).
I32 h3c3GGsmRssiWeakThreshold	1.3.6.1.4.1.43.45.1.10.2.98.1.4.1.1.3	Integer32	read-write	The weak signal threshold of GSM RSSI. The absolute value of h3c3GGsmRssiMediumThreshold should be less than or equal to the absolute value of h3c3GGsmRssiWeakThreshold. (\|h3c3GGsmRssiMediumThreshold\| <= \|h3c3GGsmRssiWeakThreshold\|).
INT h3c3GGsmSimStatus	1.3.6.1.4.1.43.45.1.10.2.98.1.4.1.1.12	INTEGER	read-only	The status of SIM.
STR h3c3GImsiBind	1.3.6.1.4.1.43.45.1.10.2.98.2.6	SnmpAdminString	accessible-for-notify	The IMSI which binded in the notifications.
h3c3GModem	1.3.6.1.4.1.43.45.1.10.2.98			The information about the wireless card and the UIM (User Identification Module).
h3c3GModemObjects	1.3.6.1.4.1.43.45.1.10.2.98.1
h3c3GModemTrap	1.3.6.1.4.1.43.45.1.10.2.98.2
h3c3GModemTrapPrefix	1.3.6.1.4.1.43.45.1.10.2.98.3.0
h3c3GModemTraps	1.3.6.1.4.1.43.45.1.10.2.98.3
NTF h3c3GRssiMediumSignalTrap	1.3.6.1.4.1.43.45.1.10.2.98.3.0.7			A h3c3GRssiMediumSignalTrap notification is generated when the current RSSI falls or rises to a value between the medium and weak signal thresholds.
NTF h3c3GRssiStrongSignalTrap	1.3.6.1.4.1.43.45.1.10.2.98.3.0.6			A h3c3GRssiStrongSignalTrap notification is generated when current RSSI exceeds the medium signal threshold.
NTF h3c3GRssiWeakSignalTrap	1.3.6.1.4.1.43.45.1.10.2.98.3.0.8			A h3c3GRssiWeakSignalTrap notification is generated when current RSSI falls below the weak signal threshold.
INT h3cAccessMedia	1.3.6.1.4.1.43.45.1.10.2.98.2.3	INTEGER	accessible-for-notify	The current access media.
NTF h3cAccessMediaChanged	1.3.6.1.4.1.43.45.1.10.2.98.3.0.5			A h3cAccessMediaChanged notification is generated when access media is changed.
STR h3cDeviceOUI	1.3.6.1.4.1.43.45.1.10.2.98.2.2	SnmpAdminString	accessible-for-notify	The OUI (Organizational Unique Identifier) of the current device.
STR h3cDevSerialNumber	1.3.6.1.4.1.43.45.1.10.2.98.2.1	SnmpAdminString	accessible-for-notify	The serial number of the current device.
h3cUIM	1.3.6.1.4.1.43.45.1.10.2.98.1.2
STR h3cUIMImsi	1.3.6.1.4.1.43.45.1.10.2.98.1.2.1.1.3	SnmpAdminString	read-only	The IMSI (International Mobile Subscriber Identification Number) about this UIM. If this information is unknown to the agent, then this object will be returned a zero-length string.
I32 h3cUIMIndex	1.3.6.1.4.1.43.45.1.10.2.98.1.2.1.1.1	Integer32	not-accessible	The index for this entry.
h3cUIMInfoEntry	1.3.6.1.4.1.43.45.1.10.2.98.1.2.1.1		not-accessible	The information about the UIM.
h3cUIMInfoTable	1.3.6.1.4.1.43.45.1.10.2.98.1.2.1		not-accessible	This table contains one row per UIM.
STR h3cUIMOldPin	1.3.6.1.4.1.43.45.1.10.2.98.1.2.1.1.9	SnmpAdminString	accessible-for-notify	The old PIN for this UIM.
STR h3cUIMPin	1.3.6.1.4.1.43.45.1.10.2.98.1.2.1.1.4	SnmpAdminString	read-only	The PIN about this UIM. If this information is unknown to the agent, then this object will be returned a zero-length string.
NTF h3cUIMPinChanged	1.3.6.1.4.1.43.45.1.10.2.98.3.0.4			A h3cUIMPinInvalid notification is generated when UIM PIN is changed.
NTF h3cUIMPinInvalid	1.3.6.1.4.1.43.45.1.10.2.98.3.0.3			A h3cUIMPinInvalid notification is generated when UIM PIN is invalid.
STR h3cUIMProvider	1.3.6.1.4.1.43.45.1.10.2.98.1.2.1.1.6	SnmpAdminString	read-only	The provider of mobile network. If this information is unknown to the agent, then this object will be returned a zero-length string.
I32 h3cUIMSignal	1.3.6.1.4.1.43.45.1.10.2.98.1.2.1.1.7	Integer32	read-only	The intensity of the signal about this UIM. A value of '99' means no signal.
H3C h3cUIMStatus	1.3.6.1.4.1.43.45.1.10.2.98.1.2.1.1.2	H3cUIMStatusType	read-only	The status about this UIM.
U32 h3cUIMTryPinPukTimes	1.3.6.1.4.1.43.45.1.10.2.98.1.2.1.1.8	Unsigned32	read-only	The number of remaining times for unlocking PIN or PUK. The value is associated the same instance of h3cUIMStatus. If this information is unknown to the agent, then this object will be returned 4294967295.
U32 h3cUIMVoltage	1.3.6.1.4.1.43.45.1.10.2.98.1.2.1.1.5	Unsigned32	read-only	The voltage about this UIM. If this information is unknown to the agent, then this object will be returned 4294967295.
h3cWirelessCard	1.3.6.1.4.1.43.45.1.10.2.98.1.1
STR h3cWirelessCardCMIIID	1.3.6.1.4.1.43.45.1.10.2.98.1.1.1.1.6	SnmpAdminString	read-only	The card ID of CMII (Ministry of Information Industry of China).
INT h3cWirelessCardCurRoamingStatus	1.3.6.1.4.1.43.45.1.10.2.98.1.1.1.1.13	INTEGER	read-only	The status of roaming.
INT h3cWirelessCardCurServiceStatus	1.3.6.1.4.1.43.45.1.10.2.98.1.1.1.1.12	INTEGER	read-only	The status of service.
STR h3cWirelessCardDescription	1.3.6.1.4.1.43.45.1.10.2.98.1.1.1.1.4	SnmpAdminString	read-only	The textual description of this card.
h3cWirelessCardEntry	1.3.6.1.4.1.43.45.1.10.2.98.1.1.1.1		not-accessible	Information about a particular wireless card.
STR h3cWirelessCardFirmwareVersion	1.3.6.1.4.1.43.45.1.10.2.98.1.1.1.1.8	SnmpAdminString	read-only	The vendor-specific firmware version string for this card.
STR h3cWirelessCardHardwareVersion	1.3.6.1.4.1.43.45.1.10.2.98.1.1.1.1.7	SnmpAdminString	read-only	The vendor-specific hardware version string for this card.
I32 h3cWirelessCardIndex	1.3.6.1.4.1.43.45.1.10.2.98.1.1.1.1.1	Integer32	read-only	The index for this entry.
NTF h3cWirelessCardInserted	1.3.6.1.4.1.43.45.1.10.2.98.3.0.1			A h3cWirelessCardInserted notification is generated when a wireless card is inserted.
NUM h3cWirelessCardInterfaceIndex	1.3.6.1.4.1.43.45.1.10.2.98.1.1.1.1.10	InterfaceIndex	read-only	The interface index in IF-MIB of this card.
STR h3cWirelessCardMfgName	1.3.6.1.4.1.43.45.1.10.2.98.1.1.1.1.3	SnmpAdminString	read-only	The name of the manufacturer of this card.
STR h3cWirelessCardModelName	1.3.6.1.4.1.43.45.1.10.2.98.1.1.1.1.2	SnmpAdminString	read-only	The model name of this card.
INT h3cWirelessCardModemStatusEx	1.3.6.1.4.1.43.45.1.10.2.98.1.1.1.1.11	INTEGER	read-only	The status of modem.
STR h3cWirelessCardPRLVersion	1.3.6.1.4.1.43.45.1.10.2.98.1.1.1.1.9	SnmpAdminString	read-only	The preferred roaming list version for this card.
NTF h3cWirelessCardPulledOut	1.3.6.1.4.1.43.45.1.10.2.98.3.0.2			A h3cWirelessCardPulledOut notification is generated when a wireless card is pulled out.
STR h3cWirelessCardSerialNumber	1.3.6.1.4.1.43.45.1.10.2.98.1.1.1.1.5	SnmpAdminString	read-only	The vendor-specific serial number string for this card.
h3cWirelessCardTable	1.3.6.1.4.1.43.45.1.10.2.98.1.1.1		not-accessible	This table contains one row per wireless card.

RFC description

3Com/Huawei vendor-private MIB for managing 3G modem modules and wireless connectivity on 3Com/Huawei devices.

Start monitoring H3C routers with 3G WAN cards with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download A3COM-HUAWEI-3GMODEM-MIB