All MIBs › COMTEK-VMS-NM-SYSMGR-MIB
Category: Domain: System Management
Description: Comtek VMS network manager system management MIB providing objects for process, resource, and system health monitoring.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is COMTEK-VMS-NM-SYSMGR-MIB?
COMTEK-VMS-NM-SYSMGR-MIB is a Comtek enterprise MIB for the VMS network manager's system manager component, exposing core system health data for the managed node. It covers node and hardware identity (node name, hardware name), boot time, running software version, and detailed memory statistics including total memory size, page size, free pages, and used-page percentage, plus swap space size and free swap. This is squarely a hardware/software health MIB: sSyiBootTime doubles as an uptime indicator, sSyiVersion tracks the running software release, and the memory/swap objects (sSyiPgFree, sSyiPgUsedPercent, sSyiSwpFree) let an operator catch memory exhaustion or excessive swapping before it causes an outage, while sSyiActiveCpuCnt versus sSyiAvailCpuCnt shows whether all CPU resources are online. The module appears self-contained under the comtekVmsNMSysMgrMib branch with no notable dependency on external standard MIBs. It is deployed on Comtek VMS-managed network elements where the VMS network manager provides centralized system health monitoring across a fleet of devices, with COMTEK-VMS-NM-SYSMGR-MIB SNMP monitoring covering memory, swap, and CPU status at each node.
IPNetwork Monitor allows you to monitor SNMP objects defined in COMTEK-VMS-NM-SYSMGR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Comtek VMS-managed network elements
Monitoring Examples
An operator would poll sSyiPgFree and sSyiPgUsedPercent on a Comtek VMS node to check for memory pressure, and cross-reference sSyiSwpFree to see if the system has started swapping, both leading indicators of an impending performance problem. Comparing sSyiActiveCpuCnt against sSyiAvailCpuCnt would reveal whether a CPU has gone offline. A recent, unexpectedly low sSyiBootTime value would flag that the node rebooted unexpectedly, worth correlating with sSyiVersion to confirm whether a software upgrade caused it.
What Can Be Monitored
- system uptime/boot time
- software version
- CPU count (available vs active)
- memory size and free pages
- memory used percentage
- swap space size and free swap
This MIB depends on
Related MIBs
Imported Objects
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| comtek | 1.3.6.1.4.1.597 | |||
| comtekVms | 1.3.6.1.4.1.597.4 | |||
| comtekVmsNMSysMgrMib | 1.3.6.1.4.1.597.4.3 | |||
| comtekVmsNMVmsMonMib | 1.3.6.1.4.1.597.4.15 | |||
| sCfg | 1.3.6.1.4.1.597.4.3.5 | |||
| INT sCfgAllPsData | 1.3.6.1.4.1.597.4.3.5.22 | INTEGER | read-write | This variable controls the amount of data that is available in the process statistics table (sPsTbl). If this flag is set to no(2), only the process statistics that are contained in the process control block (PCB) or job information block (JIB) for each process are available (data in the process header (PHD) may also be available). Setting this flag to yes makes all statistics in the sPsTbl available but incurs an additional performance overhead (to retrieve out swapped processes and deliver kernel mode ASTs to all processes). Configuration variable: AllPsData Set-requests: Take effect immediately. Changes to this value are written to the sCfgFile. |
| INT sCfgCOMOQueueLimit | 1.3.6.1.4.1.597.4.3.5.36 | INTEGER | read-write | The number of processes in COMO state at which excessive outswapped compute queue (sCOMOQue) traps begin to be sent. A value of 0 disables these traps. Configuration Variable: COMOQueue Set-requests: Take effect immediately Changes to this value are written to the sCfgFile. |
| INT sCfgCOMQueueLimit | 1.3.6.1.4.1.597.4.3.5.35 | INTEGER | read-write | The number of processes in COM state at which excessive compute queue (sCOMQue) traps begin to be sent. A value of 0 disables these traps. Configuration Variable: COMQueue Set-requests: Take effect immediately Changes to this value are written to the sCfgFile. |
| INT sCfgControlTermProc | 1.3.6.1.4.1.597.4.3.5.25 | INTEGER | read-only | Flag which may be used to disable process termination by the sCfgTermProc variable. Setting this variable to enabled(1) allows the sCfgTermProc variable to be set to true(1) to terminate the NM*SysMgr process. Setting this variable to disabled(2) prevents the sCfgTermProc variable from being set. Configuration Variable: ControlTermProc |
| INT sCfgCpuLimit | 1.3.6.1.4.1.597.4.3.5.7 | INTEGER | read-write | The percentage of CPU utilization at which excessive CPU utilization (sCpuUsage) traps begin to be sent. A value of 0 disables these traps. Configuration Variable: CpuUtil Set-requests: Take effect immediately Changes to this value are written to the sCfgFile. |
| INT sCfgCritAlarm | 1.3.6.1.4.1.597.4.3.5.19 | INTEGER | read-write | The number of minutes between repeat traps for a given critical process missing condition. Setting this variable to 0 causes only the first instance to generate a trap. Configuration Variable: RptCritAlarm Set-requests: Take effect on next timer expiration Changes to this value are written to the sCfgFile. |
| INT sCfgCritDisksOnly | 1.3.6.1.4.1.597.4.3.5.60 | INTEGER | read-write | Flag which may be used to instruct NM*SysMgr to gather disk statistics either on all available disks or only on disks listed in the Critical Disk file (COMTEK$SYSMGR_CRITDSK). If this flag is set to TRUE(1), the disk table (sDskTbl) will only contain data on disks listed in the Critical Disk file. If this flag is set to FALSE(2), the disk table (sDskTbl) will contain data on all available disks. Configuration Variable: CritDisksOnly Set-requests: Take effect on next timer expiration Changes to this value are written to the sCfgFile. |
| STR sCfgCritDsk | 1.3.6.1.4.1.597.4.3.5.30 | DisplayString | read-write | Name of the file currently being used to identify critical disk space and operations per second trap thresholds for individual disks. This file contains: disk name (required) percent full or number of free blocks (optional) operations per second (optional) The disk name may take the form of a physical disk name (including the leading underscore (_) and trailing colon (:)), a logical volume name, or, for shadowed disks, the name of the virtual unit. If two entries specify the same disk (one by physical name and the other by logical volume name), only the entry for the physcial disk name will be used for that disk. Once the disk usage exceeds the specified percent full or the number of free blocks drops below the specified free disk blocks, disk full (sDskFull) traps will begin to be sent. Disk busy (sDskOpSec) traps are sent if the number of operations per second exceeds the limit specified for this disk. The following are valid entries in the critical disk file: _ALPHA$DKA0:,blocks=652829 disk$alphasys,percent=99,ops=120 _DSA1:,ops=300 This file is associated with the system logical name COMTEK$SYSMGR_CRITDSK. Changing this variable redefines the COMTEK$SYSMGR_CRITDSK logical name. NM*SysMgr must be reinitialized (by setting the variable sCfgReinitSubagent to true) before a new critical disk file is used. If a set-request is performed on this variable and the specified file name does not exist, is not accessible by the subagent, or contains invalid data, the file name is not changed, an error is returned, and a sSwErr trap is generated describing the error. Set-requests: Take effect only after reinitialization (sCfgReinitSubagent) NOTE: To make changes to this value permanent across system reboots, the definition of this logical name must also be changed in the system startup procedures. |
| STR sCfgCritFile | 1.3.6.1.4.1.597.4.3.5.3 | DisplayString | read-write | Name of the file currently being used to identify critical processes. This file is associated with the logical name COMTEK$SYSMGR_CRITPROC. Changing this variable redefines the COMTEK$SYSMGR_CRITPROC logical name. NM*SysMgr must be reinitialized (by setting the variable sCfgReinitSubagent to true) before the new critical process file is used. If a set-request is performed on this variable and the specified file name does not exist, is not accessible by the subagent, or contains invalid data, the file name is not changed, an error is returned, and a sSwErr trap is generated describing the error. Set-requests: Take effect only after reinitialization (sCfgReinitSubagent) NOTE: To make changes to this value permanent across system reboots, the definition of this logical name must also be changed in the system startup procedures. |
| STR sCfgCritQue | 1.3.6.1.4.1.597.4.3.5.31 | DisplayString | read-write | Name of the file currently being used to identify queues to be monitored. This file is associated with the logical name COMTEK$SYSMGR_QUEUE. Changing this variable redefines the COMTEK$SYSMGR_QUEUE logical name. NM*SysMgr must be reinitialized (by setting the variable sCfgReinitSubagent to true) before the new queue file is used. If a set-request is performed on this variable and the specified file name does not exist, is not accessible by the subagent, or contains invalid data, the file name is not changed, an error is returned, and a sSwErr trap is generated describing the error. Set-requests: Take effect only after reinitialization (sCfgReinitSubagent) NOTE: To make changes to this value permanent across system reboots, the definition of this logical name must also be changed in the system startup procedures. |
| INT sCfgCritTimer | 1.3.6.1.4.1.597.4.3.5.17 | INTEGER | read-write | The number of minutes between critical process table (sCritTbl) updates. A value of 0 disables critical process missing processing. Configuration Variable: CritTimer Set-requests: Take effect on next timer expiration Changes to this value are written to the sCfgFile. |
| INT sCfgDskAlarm | 1.3.6.1.4.1.597.4.3.5.18 | INTEGER | read-write | The number of minutes between repeat traps for disk (sDskFull), page file (sPgFull), or swap file full (sSwpFull) conditions. A value of 0 causes only the initial instance of the disk, page file, or swap file full condition to trigger a trap. Configuration Variable: RptDskAlarm Set-requests: Take effect on next timer expiration Changes to this value are written to the sCfgFile. |
| INT sCfgDskLimit | 1.3.6.1.4.1.597.4.3.5.10 | INTEGER | read-write | The percentage of disk space utilization at which excessive disk utilization (sDskFull) traps begin to be sent. If this variable is set to a value other than zero, it is used to determine when to send sDskFull traps for disks not specified in the critical disk table (see sCfgCritDsk). This value and sCfgDskMinFreeBlks are mutually exclusive, i.e., only one of these values is in effect at any given time. If neither value is specified in the configuration file, then the default value of sCfgDskLimit is used for disk monitoring and sCfgDskMinFreeBlks is set to zero. To disable default disk full monitoring, both of these values must be zero. Set-requests to this value will fail unless sCfgDskMinFreeBlks is set to zero. Configuration Variable: DskUse Set-requests: Take effect immediately Changes to this value are written to the sCfgFile. |
| INT sCfgDskMinFreeBlks | 1.3.6.1.4.1.597.4.3.5.33 | INTEGER | read-write | The minimum number of disk blocks that must be free on a disk. When the number of free blocks on a disk drops below this level, excessive disk utilization (sDskFull) traps begin to be sent. If this variable is set to a value other than zero, it is used to determine when to send sDskFull traps for disks not specified in the critical disk table (see sCfgCritDsk). This value and sCfgDskLimit are mutually exclusive, i.e., only one of these values is in effect at any given time. If neither value is specified in the configuration file, then the default value of sCfgDskLimit is used for disk monitoring and sCfgDskMinFreeBlks is set to zero. To disable default disk full monitoring, both of these values must be zero. Set-requests to this value will fail unless sCfgDskLimit is set to zero. Configuration Variable: DskMinFreeBlks Set-requests: Take effect immediately Changes to this value are written to the sCfgFile. |
| INT sCfgDskOps | 1.3.6.1.4.1.597.4.3.5.9 | INTEGER | read-write | The threshold at which excessive disk busy traps (sDskOpSec) begin to be sent. This value is expressed in terms of disk operations (reads and writes) per second. At expiration of each sCfgDskTimer interval, the number of disk operations during the intervening interval is computed. A trap is sent if the number of operations during that interval exceeds the this limit. A value of 0 disables disk busy traps. Different thresholds may be set on individual disks by specifying an OpSec limit in the critical disk file. Configuration Variable: DskOps Set-requests: Take effect immediately Changes to this value are written to the sCfgFile. |
| INT sCfgDskTimer | 1.3.6.1.4.1.597.4.3.5.14 | INTEGER | read-write | The number of minutes between updates of the disk table (sDskTbl) data. A value of 0 disables gathering of disk related data. Configuration Variable: DskTimer Set-requests: Take effect on next timer expiration Changes to this value are written to the sCfgFile. |
| STR sCfgFile | 1.3.6.1.4.1.597.4.3.5.1 | DisplayString | read-write | Name of the file currently being used for NM*SysMgr initialization parameters. This file is identified by the logical name COMTEK$SYSMGR_CONFIG. Changing this variable redefines the COMTEK$SYSMGR_CONFIG logical name. NM*SysMgr must be reinitialized (by setting the variable sCfgReinitSubagent to true) before the new configuration file is used. If a set-request is performed on this variable and the specified file name does not exist, is not accessible by the subagent, or contains invalid data, the file name is not changed, and an error is returned, and a sSwErr trap is generated describing the error. Set-requests: Take effect only after reinitialization (sCfgReinitSubagent) NOTE: To make changes to this value permanent across system reboots, the definition of this logical name must also be changed in the system startup procedures. |
| STR sCfgHostName | 1.3.6.1.4.1.597.4.3.5.21 | DisplayString | read-only | The name of the host that the subagent is communicating with. This is the host name where the NM*Master Agent resides. This variable is not currently used. Configuration Variable: Host |
| INT sCfgHwErrTimer | 1.3.6.1.4.1.597.4.3.5.15 | INTEGER | read-write | The number of minutes between updates of the hardware error table (sHwErrTbl) data. A value of 0 disables gathering of hardware error data. Configuration Variable: HwErrTimer Set-requests: Take effect on next timer expiration Changes to this value are written to the sCfgFile. |
| INT sCfgHwErrTraps | 1.3.6.1.4.1.597.4.3.5.6 | INTEGER | read-write | Flag which determines if hardware error traps (sHwErr) should be sent. Setting this variable to enabled(1) causes a trap to be sent for every error detected. Setting this variable to disabled(2) disables hardware error traps from being sent. Configuration Variable: HwErrTrap Set-requests: Take effect immediately Changes to this value are written to the sCfgFile. |
| INT sCfgIntLimit | 1.3.6.1.4.1.597.4.3.5.8 | INTEGER | read-write | The percentage of interrupt CPU utilization at which excessive interrupt utilization (sIntUsage) traps begin to be sent. A value of 0 disables these traps. Configuration Variable: IntUtil Set-requests: Take effect immediately Changes to this value are written to the sCfgFile. |
| INT sCfgLocalDisksOnly | 1.3.6.1.4.1.597.4.3.5.59 | INTEGER | read-write | Flag which may be used to instruct NM*SysMgr to gather disk statistics either on all available disks or only on local disks. A disk is considered to be local if the variable sDskRemote for the disk is FALSE(2), indicating that the disk is not remote. If this flag is set to TRUE(1), the disk table (sDskTbl) will only contain data on local disks. If this flag is set to FALSE(2), the disk table (sDskTbl) will contain data on all available disks. Configuration Variable: LocalDisksOnly Set-requests: Take effect on next timer expiration Changes to this value are written to the sCfgFile. |
| STR sCfgLogFile | 1.3.6.1.4.1.597.4.3.5.2 | DisplayString | read-only | Name of the log file currently being used by NM*SysMgr. If this process is run interactively, this variable will have the value SYS$OUTPUT: (standard output). |
| INT sCfgMaxTrapSec | 1.3.6.1.4.1.597.4.3.5.29 | INTEGER | read-write | This value specifies the maximum number of traps per second that may be sent. A value of zero disables trap throttling, allowing all traps to be sent as they are generated. It is recommended that this value and sCfgTrapTblSize be tuned to each operational environment. Configuration Variable: MaxTrapSec Set-requests: Take effect immediately. Changes to this value are written to the sCfgFile. |
| INT sCfgMemLimit | 1.3.6.1.4.1.597.4.3.5.34 | INTEGER | read-write | The percentage of physical memory utilization at which excessive memory utilization (sMemFull) traps begin to be sent. A value of 0 disables these traps. Configuration Variable: MemUse Set-requests: Take effect immediately Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomCards | 1.3.6.1.4.1.597.4.3.5.37 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom CARDS class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving CARDS opcom messages. Configuration Variable: Cards Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomCentral | 1.3.6.1.4.1.597.4.3.5.38 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom CENTRAL class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving CENTRAL opcom messages. Configuration Variable: Central Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomCluster | 1.3.6.1.4.1.597.4.3.5.39 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom CLUSTERclass messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving CLUSTER opcom messages. Configuration Variable: Cluster Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomDevices | 1.3.6.1.4.1.597.4.3.5.40 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom DEVICES class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving DEVICES opcom messages. Configuration Variable: Devices Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomDisks | 1.3.6.1.4.1.597.4.3.5.41 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom DISKS class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving DISKS opcom messages. Configuration Variable: Disks Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomFilter | 1.3.6.1.4.1.597.4.3.5.58 | INTEGER | read-write | Flag which determines if NM*SysMgr will drop opcom messages that match filter criteria or drop all opcom messages except those that match filter criteria. Configuration Variable: Filter Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomLicense | 1.3.6.1.4.1.597.4.3.5.42 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom LICENSE class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving LICENSE opcom messages. Configuration Variable: License Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomNetwork | 1.3.6.1.4.1.597.4.3.5.43 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom NETWORK class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving NETWORK opcom messages. Configuration Variable: Network Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomOper1 | 1.3.6.1.4.1.597.4.3.5.44 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom OPER1 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER1 opcom messages. Configuration Variable: Oper1 Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomOper10 | 1.3.6.1.4.1.597.4.3.5.53 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom OPER10 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER10 opcom messages. Configuration Variable: Oper10 Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomOper11 | 1.3.6.1.4.1.597.4.3.5.54 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom OPER11 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER11 opcom messages. Configuration Variable: Oper11 Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomOper12 | 1.3.6.1.4.1.597.4.3.5.55 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom OPER12 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER12 opcom messages. Configuration Variable: Oper12 Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomOper2 | 1.3.6.1.4.1.597.4.3.5.45 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom OPER2 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER2 opcom messages. Configuration Variable: Oper2 Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomOper3 | 1.3.6.1.4.1.597.4.3.5.46 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom OPER3 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER3 opcom messages. Configuration Variable: Oper3 Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomOper4 | 1.3.6.1.4.1.597.4.3.5.47 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom OPER4 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER4 opcom messages. Configuration Variable: Oper4 Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomOper5 | 1.3.6.1.4.1.597.4.3.5.48 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom OPER5 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER5 opcom messages. Configuration Variable: Oper5 Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomOper6 | 1.3.6.1.4.1.597.4.3.5.49 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom OPER6 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER6 opcom messages. Configuration Variable: Oper6 Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomOper7 | 1.3.6.1.4.1.597.4.3.5.50 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom OPER7 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER7 opcom messages. Configuration Variable: Oper7 Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomOper8 | 1.3.6.1.4.1.597.4.3.5.51 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom OPER8 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER8 opcom messages. Configuration Variable: Oper8 Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomOper9 | 1.3.6.1.4.1.597.4.3.5.52 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom OPER9 class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving OPER9 opcom messages. Configuration Variable: Oper9 Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomPrinter | 1.3.6.1.4.1.597.4.3.5.56 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom PRINTER class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving PRINTER opcom messages. Configuration Variable: Printer Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgOpcomSecurity | 1.3.6.1.4.1.597.4.3.5.24 | INTEGER | read-write | Flag which determines if the opcom security messages are to be sent as opcom traps. Setting this variable to enabled(1) causes opcom trap messages to be sent for security messages. Configuration Variable: OpcomSecurity Set-requests: Take effect at next process start-up Changes to this value are written to the tCfgFile. |
| INT sCfgOpcomTapes | 1.3.6.1.4.1.597.4.3.5.57 | INTEGER | read-write | Flag which determines if NM*SysMgr will receive opcom TAPES class messages. Setting this variable to disabled(2) disables NM*SysMgr from receiving TAPES opcom messages. Configuration Variable: Tapes Set-requests: Take effect on next process start-up Changes to this value are written to the sCfgFile. |
| INT sCfgPgLimit | 1.3.6.1.4.1.597.4.3.5.11 | INTEGER | read-write | The percentage of page file utilization at which excessive page file utilization (sPgFull) traps begin to be sent. A value of 0 disables these traps. Configuration Variable: PgUse Set-requests: Take effect immediately Changes to this value are written to the sCfgFile. |
| INT sCfgPsTimer | 1.3.6.1.4.1.597.4.3.5.13 | INTEGER | read-write | The number of minutes between updates of the process statistics table (sPsTbl) data. A value of 0 disables gathering of process related data. Configuration Variable: PsTimer Set-requests: Take effect on next timer expiration Changes to this value are written to the sCfgFile. |
| INT sCfgQueTimer | 1.3.6.1.4.1.597.4.3.5.32 | INTEGER | read-write | The number of minutes between updates of the queue statistics table (sQTbl) data. A value of 0 disables gathering of queue related data. Configuration Variable: QueTimer Set-requests: Take effect on next timer expiration Changes to this value are written to the sCfgFile. |
| INT sCfgReinitSubagent | 1.3.6.1.4.1.597.4.3.5.4 | INTEGER | read-write | Flag which may be set to force the NM*SysMgr Subagent to reinitialize. Reinitialization involves resetting the process configuration using the parameters contained in the sCfgFile and resetting the critical process, critical disk, and critical queue data as specified in the sCfgCritFile, sCfgCritDsk, and sCfgCritQue files and sending the sWarmStart trap. |
| INT sCfgSwpLimit | 1.3.6.1.4.1.597.4.3.5.12 | INTEGER | read-write | The percentage of swap file utilization at which excessive swap file utilization (sSwpFull) traps begin to be sent. A value of 0 disables these traps. Configuration Variable: SwpUse Set-requests: Take effect immediately Changes to this value are written to the sCfgFile. |
| INT sCfgSysInfoTimer | 1.3.6.1.4.1.597.4.3.5.16 | INTEGER | read-write | The number of minutes between updates of the system information (sSyi) data. A value of 0 disables gathering of system information data. Configuration Variable: SysInfoTimer Set-requests: Take effect on next timer expiration Changes to this value are written to the sCfgFile. |
| INT sCfgTermProc | 1.3.6.1.4.1.597.4.3.5.26 | INTEGER | read-write | Flag which may be used to shutdown the NM*SysMgr process. Setting this flag to true causes the NM*SysMgr process to respond to the set-request, send the sTermProc trap, close the connection to the NM*Master Agent, and shutdown. If the sCfgControlTermProc flag state is disabled(2), the sCfgTermProc variable can not be set. Set-requests: Take effect immediately if sCfgControlTermProc is enabled(2) |
| INT sCfgTimeout | 1.3.6.1.4.1.597.4.3.5.23 | INTEGER | read-only | This variable identifies the time-out value that is to be used by the subagent during subtree registration. If this value is set to zero, the default value (saDefaultTimeout) contained in the NM*Master Agent will be used. If the value specified exceeds the current maximum that NM*Master will permit (saMaxTimeout), the maximum value will be used. This value is specified in seconds. Configuration Variable: Timeout |
| INT sCfgTraps | 1.3.6.1.4.1.597.4.3.5.5 | INTEGER | read-write | Flag which determines if any trap messages are sent to the NM*Master Agent. Setting this variable to disabled(2) disables all traps from being sent. Configuration Variable: Traps Set-requests: Take effect immediately Changes to this value are written to the sCfgFile. |
| INT sCfgTrapTblSize | 1.3.6.1.4.1.597.4.3.5.20 | INTEGER | read-write | The maximum number of traps to be retained. Traps that are retained may be resent (see sTrapResendSeqNum) unless too many subsequent traps have been generated. This variable controls how many traps are retained in NM*SysMgr's internal trap table. Configuration Variable: TrapTableSize Set-Requests: Take effect immediately Changes to this value are written to the sCfgFile. |
| TIK sCfgUpTime | 1.3.6.1.4.1.597.4.3.5.28 | TimeTicks | read-only | Subagent up time. |
| STR sCfgVersion | 1.3.6.1.4.1.597.4.3.5.27 | DisplayString | read-only | Current version of the NM*SysMgr Subagent software. |
| INT sCompFifteen | 1.3.6.1.4.1.597.4.3.1.2.6.6 | INTEGER | read-only | Number of ticks spent in Compatibility mode during the past fifteen minutes. |
| INT sCompFive | 1.3.6.1.4.1.597.4.3.1.2.5.6 | INTEGER | read-only | Number of ticks spent in Compatibility mode during the past five minutes. |
| INT sCompOne | 1.3.6.1.4.1.597.4.3.1.2.4.6 | INTEGER | read-only | Number of interval timer ticks in Compatibility mode for all CPUs during the last one minute interval. |
| sCpu | 1.3.6.1.4.1.597.4.3.1.2 | |||
| sCpuLoadFifteenMinute | 1.3.6.1.4.1.597.4.3.1.2.6 | |||
| sCpuLoadFiveMinute | 1.3.6.1.4.1.597.4.3.1.2.5 | |||
| sCpuLoadOneMinute | 1.3.6.1.4.1.597.4.3.1.2.4 | |||
| INT sCpuPercentUsed | 1.3.6.1.4.1.597.4.3.1.2.1 | INTEGER | read-only | The percent utilization of all CPUs, i.e., the percent of time the combined CPUs were not idle during the last one minute interval. |
| INT sCpuTicks | 1.3.6.1.4.1.597.4.3.1.2.3 | INTEGER | read-only | Number of interval timer ticks that have occurred since the last time CPU statistics were gathered (approximately one minute). This value is the sum of the one minute mode tick counters. This number has been normalized to account for all active CPUs on the system. This value may be used with the one minute CPU mode times to determine the percent of time spent in each CPU mode. |
| INT sCritCnt | 1.3.6.1.4.1.597.4.3.2.2.1 | INTEGER | read-only | Number of critical process table entries. |
| INT sCritCurCnt | 1.3.6.1.4.1.597.4.3.2.2.3.1.4 | INTEGER | read-only | The current number of copies of this process running on the system. |
| sCritEntry | 1.3.6.1.4.1.597.4.3.2.2.3.1 | not-accessible | A row in the critical process table. | |
| INT sCritIndex | 1.3.6.1.4.1.597.4.3.2.2.3.1.1 | INTEGER | read-only | Location in the critical process table. |
| sCritInfo | 1.3.6.1.4.1.597.4.3.2.2 | |||
| STR sCritName | 1.3.6.1.4.1.597.4.3.2.2.3.1.2 | DisplayString | read-only | Name of a critical process. Critical process names may contain * and % wildcard characters. |
| INT sCritReqCnt | 1.3.6.1.4.1.597.4.3.2.2.3.1.3 | INTEGER | read-only | Minimum number of copies of this process required to be running on the system. |
| sCritTbl | 1.3.6.1.4.1.597.4.3.2.2.3 | not-accessible | Table of critical process information. | |
| TIK sCritTime | 1.3.6.1.4.1.597.4.3.2.2.2 | TimeTicks | read-only | Subagent up time (sCfgUpTime) when critical process statistics (sCritTbl) were last gathered. sCfgCritTimer specifies how often critical process statistics are gathered. |
| sDsk | 1.3.6.1.4.1.597.4.3.1.3 | |||
| INT sDskDevChar | 1.3.6.1.4.1.597.4.3.1.3.3.1.13 | INTEGER | read-only | The disk device-independent characteristics of the disk. This value is a bit vector which, when set, corresponds to the following characteristic: Bit Description 0 REC (Device is record oriented) 1 CCL (Device is a carriage control device) 2 TRM (Device is a terminal) 3 DIR (Device is directory structured) 4 SDI (Device is single-directory structured) 5 SQD (Device is sequential and block oriented) 6 SPL (Device is being spooled) 7 OPR (Device is an operator) 8 RCT (Disk contains Revector Cache Table. This bit is set for every DAA disk) 13 NET (Device is a network device) 14 FOD (Device is files oriented) 15 DUA (Device is dual ported) 16 SHR (Device is shareable) 17 GEN (Device is a generic device) 18 AVL (Device is available for use) 19 MNT (Device is mounted) 20 MBX (Device is a mailbox) 21 DMT (Device is marked for dismount) 22 ELG (Device has error logging enabled) 23 ALL (Device is allocated) 24 FOR (Device is mounted foreign) 25 SWL (Devoce is software write locked) 26 IDV (Device can provide input) 27 ODV (Device can provide output) 28 RND (Device allows random access) 29 RTM (Device is a real-time device) 30 RCK (Device has read-checking enabled) 31 WCK (Device has write-checking enabled) |
| sDskEntry | 1.3.6.1.4.1.597.4.3.1.3.3.1 | not-accessible | A row in the disk table. | |
| INT sDskFreeBlocks | 1.3.6.1.4.1.597.4.3.1.3.3.1.10 | INTEGER | read-only | The number of free blocks on the disk. |
| INT sDskIndex | 1.3.6.1.4.1.597.4.3.1.3.3.1.1 | INTEGER | read-only | Location in the disk table. |
| STR sDskLogVolName | 1.3.6.1.4.1.597.4.3.1.3.3.1.14 | DisplayString | read-only | The logical name of the volume or volume set. |
| INT sDskMaxBlocks | 1.3.6.1.4.1.597.4.3.1.3.3.1.11 | INTEGER | read-only | The maximum number of blocks on the volume. |
| STR sDskMediaName | 1.3.6.1.4.1.597.4.3.1.3.3.1.8 | DisplayString | read-only | The name of the volume type. |
| INT sDskMountCnt | 1.3.6.1.4.1.597.4.3.1.3.3.1.5 | INTEGER | read-only | The mount count for the volume. |
| STR sDskName | 1.3.6.1.4.1.597.4.3.1.3.3.1.2 | DisplayString | read-only | Device name. |
| INT sDskOpCnt | 1.3.6.1.4.1.597.4.3.1.3.3.1.9 | INTEGER | read-only | The operation count for the volume. |
| INT sDskOps | 1.3.6.1.4.1.597.4.3.1.3.3.1.4 | INTEGER | read-only | The average number of disk operations per second during the last disk statistics update interval. (The disk statistics update frequency is determined by the variable sCfgDskTimer.) |
| INT sDskQueueLength | 1.3.6.1.4.1.597.4.3.1.3.3.1.19 | INTEGER | read-only | I/O queue length for this disk. |
| INT sDskRefCnt | 1.3.6.1.4.1.597.4.3.1.3.3.1.6 | INTEGER | read-only | The number of channels assigned to the device. |
| INT sDskRemote | 1.3.6.1.4.1.597.4.3.1.3.3.1.20 | INTEGER | read-only | A value of true(1) indicates that the device is a remote device; a value of false(2) indicates that it is not a remote device. A remote device is a device that is not directly connected to the local node, but instead is visible through the VMScluster system. |
| CTR sDskShdCount | 1.3.6.1.4.1.597.4.3.1.3.3.1.17 | Counter | read-only | The number of shadow set members that make up this virtual unit. If this number is zero, then this is not a virtual disk. This number indicates the number of shadow set entries that will be found in the (sShdTbl) for this disk. |
| INT sDskStatus | 1.3.6.1.4.1.597.4.3.1.3.3.1.12 | INTEGER | read-only | The device unit status for the physical disk or virtual disk. This value is a bit vector which, when set, corresponds to the following states: Bit Description 0 TIM (time-out is enabled) 1 INT (Interrupt is expected) 2 ERLOGIP (Error log in progress on unit) 3 CANCEL (I/O on unit is canceled) 4 ONLINE (Unit is online) 5 POWER (Power failed while unit busy) 6 TIMOUT (Unit timed out) 7 INTTYPE (Receiver interrupt) 8 BSY (Unit is busy) 9 MOUNTING (Device is being mounted) 10 DEADMO (Deallocate at dismount) 11 VALID (Volume is software valid) 12 UNLOAD (Unload volume at dismount) 13 TEMPLATE (Template UCB) 14 MNTVERIP (Mount verification is in progress) 15 WRONGVOL (Wrong volume detected during mount verification) 16 DELETEUCB (Delete this UCB when reference count equals 0) 17 LCL_VALID (Volume is valid on local node) 18 SUPMVMSG (Suppress mount verification messages if they indicate success) 19 MNTVERPEND (Mount verification is pending on the device and the device is busy) 20 DISMOUNT (Dismount in progress) 21 CLUTRAN (VAXcluster state transition in progress) 22 WRTLOCKMV (Write-locked mount verification in progress) 23 SVPN_END (Last byte used from page is mapped by a system virtual page number ) 24 ALTBSY (Unit is busy via an alternate startup path) 25 SNAPSHOT (Restart verification is in progress) A sDskStatus trap message is sent when a device transitions into the POWER, TIMOUT, or MNTVERIP state. |
| sDskTbl | 1.3.6.1.4.1.597.4.3.1.3.3 | not-accessible | Table of disk information. | |
| INT sDskTblCnt | 1.3.6.1.4.1.597.4.3.1.3.1 | INTEGER | read-only | Number of entries in the disk table. |
| TIK sDskTblTime | 1.3.6.1.4.1.597.4.3.1.3.2 | TimeTicks | read-only | Subagent up time (sCfgUpTime) when disk statistics (sDskTbl) were last gathered. sCfgDskTimer controls how often disk statistics are gathered. |
| INT sDskTransCnt | 1.3.6.1.4.1.597.4.3.1.3.3.1.7 | INTEGER | read-only | The transaction count for the volume. |
| INT sDskTrapBlocks | 1.3.6.1.4.1.597.4.3.1.3.3.1.16 | INTEGER | read-only | The minimum number of free disk blocks required for this disk. If the actual number of free blocks on the disk drops below this level, disk utilization (sDskFull) traps begin to be sent for this disk. A value of 0 indicates that either a percent full is being used for this disk (see sDskTrapPercent) or the system default disk use limit (identified by sCfgDskLimit), or the system default disk minimum free block limit (identified by sCfgDskMinFreeBlks) for the system is being used. Disks which have a specific usage limit set are contained in the critical disk file. See sCfgCritDsk for more information about this file. |
| INT sDskTrapOpSec | 1.3.6.1.4.1.597.4.3.1.3.3.1.18 | INTEGER | read-only | The number of operations per second at which excessive disk (sDskOpSec) traps begin to be sent for this disk. A value of 0 indicates that the system default disk operations per second limit (identified by sCfgDskOps), is being used. Disks which have a specific limit set are contained in the critical disk file. If both this value and sCfgDskOps are zero, disk operations per second traps are disabled. See sCfgCritDsk for more information about the critical disk file. |
| INT sDskTrapPercent | 1.3.6.1.4.1.597.4.3.1.3.3.1.15 | INTEGER | read-only | The percentage of disk space utilization at which excessive disk utilization (sDskFull) traps begin to be sent for this disk. A value of 0 indicates that either a disk block free count is being used for this disk (see sDskTrapBlocks), or the system default disk use limit (identified by sCfgDskLimit), or the system default disk minimum free block limit (identified by sCfgDskMinFreeBlks) for the system is being used. Disks which have a specific usage limit set are contained in the critical disk file. See sCfgCritDsk for more information about this file. |
| INT sDskUsedPercent | 1.3.6.1.4.1.597.4.3.1.3.3.1.3 | INTEGER | read-only | The disk percent full. |
| sErrInfo | 1.3.6.1.4.1.597.4.3.4 | |||
| INT sExecFifteen | 1.3.6.1.4.1.597.4.3.1.2.6.2 | INTEGER | read-only | Number of ticks spent in Executive mode during the past fifteen minutes. |
| INT sExecFive | 1.3.6.1.4.1.597.4.3.1.2.5.2 | INTEGER | read-only | Number of ticks spent in Executive mode during the past five minutes. |
| INT sExecOne | 1.3.6.1.4.1.597.4.3.1.2.4.2 | INTEGER | read-only | Number of interval timer ticks in Executive mode for all CPUs during the last one minute interval. |
| INT sHwErrCnt | 1.3.6.1.4.1.597.4.3.4.1.3.1.3 | INTEGER | read-only | Number of errors reported by the device since last reboot of the system. |
| INT sHwErrDeviceCnt | 1.3.6.1.4.1.597.4.3.4.1.1 | INTEGER | read-only | Number of devices reporting errors. |
| STR sHwErrDeviceName | 1.3.6.1.4.1.597.4.3.4.1.3.1.2 | DisplayString | read-only | Name of the device. |
| sHwErrEntry | 1.3.6.1.4.1.597.4.3.4.1.3.1 | not-accessible | A row in the hardware error table. | |
| INT sHwErrIndex | 1.3.6.1.4.1.597.4.3.4.1.3.1.1 | INTEGER | read-only | Location in the hardware error table. |
| sHwErrInfo | 1.3.6.1.4.1.597.4.3.4.1 | |||
| TIK sHwErrLastTime | 1.3.6.1.4.1.597.4.3.4.1.3.1.4 | TimeTicks | read-only | sCfgUpTime when the latest error was detected by the NM*SysMgr Subagent. |
| sHwErrTbl | 1.3.6.1.4.1.597.4.3.4.1.3 | not-accessible | Table of hardware errors. | |
| TIK sHwErrTime | 1.3.6.1.4.1.597.4.3.4.1.2 | TimeTicks | read-only | Subagent up time (sCfgUpTime) when hardware error statistics were last gathered. |
| INT sIntPercentUsed | 1.3.6.1.4.1.597.4.3.1.2.2 | INTEGER | read-only | The percent of time the combined CPUs spent in interrupt mode during the last one minute interval. |
| INT sIntrFifteen | 1.3.6.1.4.1.597.4.3.1.2.6.5 | INTEGER | read-only | Number of ticks spent in Interrupt mode during the past fifteen minutes. |
| INT sIntrFive | 1.3.6.1.4.1.597.4.3.1.2.5.5 | INTEGER | read-only | Number of ticks spent in Interrupt mode during the past five minutes. |
| INT sIntrOne | 1.3.6.1.4.1.597.4.3.1.2.4.5 | INTEGER | read-only | Time in Interrupt mode for all CPUs during the last one minute interval. This value indicates the number of interval timer ticks in Kernel mode on the Interrupt stack. |
| INT sKernelFifteen | 1.3.6.1.4.1.597.4.3.1.2.6.1 | INTEGER | read-only | Number of ticks spent in Kernel mode during the past fifteen minutes. |
| INT sKernelFive | 1.3.6.1.4.1.597.4.3.1.2.5.1 | INTEGER | read-only | Number of ticks spent in Kernel mode during the past five minutes. |
| INT sKernelOne | 1.3.6.1.4.1.597.4.3.1.2.4.1 | INTEGER | read-only | Time in Kernel mode for all CPUs during the last one minute interval. This value indicates the number of ticks in kernel mode on the kernel stack, when no spinlock busy wait is active. |
| INT sNullFifteen | 1.3.6.1.4.1.597.4.3.1.2.6.8 | INTEGER | read-only | Number of ticks the CPUs were idle during the past fifteen minutes. |
| INT sNullFive | 1.3.6.1.4.1.597.4.3.1.2.5.8 | INTEGER | read-only | Number of ticks the CPUs were idle during the past five minutes. |
| INT sNullOne | 1.3.6.1.4.1.597.4.3.1.2.4.8 | INTEGER | read-only | CPU idle time for all CPUs during the last one minute interval. This value is measured in interval timer ticks. |
| STR sOpcomFive | 1.3.6.1.4.1.597.4.3.4.7 | DisplayString | read-only | Part 5 of an opcom message. |
| STR sOpcomFour | 1.3.6.1.4.1.597.4.3.4.6 | DisplayString | read-only | Part 4 of an opcom message. |
| STR sOpcomOne | 1.3.6.1.4.1.597.4.3.4.3 | DisplayString | read-only | The first 255 characters of the text of the most recent message in the operator log. For opcom messages that exceed 255 characters, the remainder of the message will be contained in sOpcomTwo, sOpcomThree, sOpcomFour, sOpcomFive, sOpcomSix, and sOpcomSeven depending on the length of the message. All operator log messages are sent as sOpcomMessage traps and retained in the internal trap table. To retrieve a previous message, resend the trap (see sTrapResendSeqNum). |
| INT sOpcomReplyId | 1.3.6.1.4.1.597.4.3.4.8 | INTEGER | read-write | Request number to be associated with the operator reply. This number identifies a previous Opcom request. This variable is reset to zero when a reply is successfully sent. (See sOpcomReplySend.) |
| INT sOpcomReplySend | 1.3.6.1.4.1.597.4.3.4.11 | INTEGER | read-write | Flag which is used to trigger sending of an operator reply message. To send an operator reply, set the sOpcomReplyId, sOpcomReplyStatus, and sOpcomReplyText variables and then set the sOpcomReplySend to true. All opcom reply variables will be reset following a successful send. |
| INT sOpcomReplyStatus | 1.3.6.1.4.1.597.4.3.4.9 | INTEGER | read-write | Completion status to accompany opcom reply. This variable is reset to noStatus when a reply is successfully sent. (See sOpcomReplySend.) |
| STR sOpcomReplyText | 1.3.6.1.4.1.597.4.3.4.10 | DisplayString | read-write | Text to be sent for an operator reply message. This variable is reset to null when a reply is successfully sent. (See sOpcomReplySend.) |
| STR sOpcomSeven | 1.3.6.1.4.1.597.4.3.4.13 | DisplayString | read-only | Part 7 of an opcom message. |
| STR sOpcomSix | 1.3.6.1.4.1.597.4.3.4.12 | DisplayString | read-only | Part 6 of an opcom message. |
| STR sOpcomThree | 1.3.6.1.4.1.597.4.3.4.5 | DisplayString | read-only | Part 3 of an opcom message. |
| STR sOpcomTwo | 1.3.6.1.4.1.597.4.3.4.4 | DisplayString | read-only | Part 2 of an opcom message. |
| sProcesses | 1.3.6.1.4.1.597.4.3.2 | |||
| sProcInfo | 1.3.6.1.4.1.597.4.3.2.1 | |||
| CTR sPsAvailProcSlots | 1.3.6.1.4.1.597.4.3.2.1.10 | Counter | read-only | Count of Available Process Slots. |
| CTR sPsBatch | 1.3.6.1.4.1.597.4.3.2.1.8 | Counter | read-only | Count of batch processes. |
| INT sPsCnt | 1.3.6.1.4.1.597.4.3.2.1.1 | INTEGER | read-only | Number of processes currently running of the system. |
| INT sPsCOMOQueue | 1.3.6.1.4.1.597.4.3.2.1.5 | INTEGER | read-only | Number of outswapped processes that are waiting to compute, i.e., the number of processes with a sPsState of COMO. |
| INT sPsCOMQueue | 1.3.6.1.4.1.597.4.3.2.1.4 | INTEGER | read-only | Number of processes that are waiting to compute, i.e., the number of processes with a sPsState of COM. |
| TIK sPsCpuTime | 1.3.6.1.4.1.597.4.3.2.1.3.1.6 | TimeTicks | read-only | The process' accumulated CPU time. If sCfgAllPsData is set to no(2), this value may be zero. |
| INT sPsDirectIO | 1.3.6.1.4.1.597.4.3.2.1.3.1.5 | INTEGER | read-only | The count of the direct I/O operations performed by this process. If sCfgAllPsData is set to no(2), this value may be zero. |
| sPsEntry | 1.3.6.1.4.1.597.4.3.2.1.3.1 | not-accessible | A row in the process table. | |
| STR sPsImageName | 1.3.6.1.4.1.597.4.3.2.1.3.1.11 | DisplayString | read-only | The directory specification and image file name. If sCfgAllPsData is set to no(2), this value may be zero. |
| CTR sPsInteractive | 1.3.6.1.4.1.597.4.3.2.1.9 | Counter | read-only | Count of Interactive processes. |
| STR sPsLoginTime | 1.3.6.1.4.1.597.4.3.2.1.3.1.12 | DisplayString | read-only | The time at which the process was created. This value is in dd-mmm-yyyy hh:mm:ss.cc format. If sCfgAllPsData is set to no(2), this value may be zero. |
| INT sPsMode | 1.3.6.1.4.1.597.4.3.2.1.3.1.14 | INTEGER | read-only | The mode of the process. |
| CTR sPsNetwork | 1.3.6.1.4.1.597.4.3.2.1.7 | Counter | read-only | Count of network processes. |
| CTR sPsOther | 1.3.6.1.4.1.597.4.3.2.1.6 | Counter | read-only | Count of other mode processes i.e., those processes that are not network, batch or interactive. |
| INT sPsPgFaults | 1.3.6.1.4.1.597.4.3.2.1.3.1.7 | INTEGER | read-only | The total number of page faults incurred by the process. If sCfgAllPsData is set to no(2), this value may be zero. |
| INT sPsPgTblCnt | 1.3.6.1.4.1.597.4.3.2.1.3.1.13 | INTEGER | read-only | The number of pages the process has in its working set. |
| STR sPsPhysTerm | 1.3.6.1.4.1.597.4.3.2.1.3.1.10 | DisplayString | read-only | The physical device name of the terminal associated with the process. |
| INT sPsPID | 1.3.6.1.4.1.597.4.3.2.1.3.1.1 | INTEGER | read-only | The VMS process identification (PID) of the process. |
| INT sPsPriority | 1.3.6.1.4.1.597.4.3.2.1.3.1.4 | INTEGER | read-only | The current priority of the process. |
| STR sPsProcName | 1.3.6.1.4.1.597.4.3.2.1.3.1.2 | DisplayString | read-only | The process name. |
| INT sPsRWState | 1.3.6.1.4.1.597.4.3.2.1.3.1.15 | INTEGER | read-only | The resource wait state of the process. This variable is only meaningful when a process is in the MWAIT state (i.e., when sPsState is set to MWAIT(2)), otherwise this variable contains no data. The above listed resource wait states have the following meanings: AST - AST wait MBX - Mailbox full NPG - Nonpaged dynamic memory PFF - Page file full PAG - Paged dynamic memory MPE - Modified page list empty MPB - Modified page writer busy SCS - Distributed lock manager wait CLU - VMScluster transition CAP - CPU capability CSV - VMScluster server process PSXFRK - POSIX fork creation MUTEX - Locked resource |
| INT sPsState | 1.3.6.1.4.1.597.4.3.2.1.3.1.3 | INTEGER | read-only | The state of the process. |
| sPsTbl | 1.3.6.1.4.1.597.4.3.2.1.3 | not-accessible | Table of process information. | |
| TIK sPsTime | 1.3.6.1.4.1.597.4.3.2.1.2 | TimeTicks | read-only | Subagent up time (sCfgUpTime) when process statistics (sPsTbl) were last gathered. sCfgPsTimer controls how often process statistics are gathered. |
| STR sPsUsername | 1.3.6.1.4.1.597.4.3.2.1.3.1.9 | DisplayString | read-only | The owner username of the process. This string is always blank padded to a length of 12 characters. |
| INT sPsWorkSetSize | 1.3.6.1.4.1.597.4.3.2.1.3.1.8 | INTEGER | read-only | The current working set size (in pages) of the process. If sCfgAllPsData is set to no(2), this value may be zero. |
| sQEntry | 1.3.6.1.4.1.597.4.3.1.5.4.1 | not-accessible | A row in the queue entry table. | |
| INT sQEntryCount | 1.3.6.1.4.1.597.4.3.1.5.3.1.5 | INTEGER | read-only | Number of current queue entries. This number also identifies the number of rows in the sQEntryTbl for this queue. |
| STR sQEntryJobname | 1.3.6.1.4.1.597.4.3.1.5.4.1.2 | DisplayString | read-only | The job name of this queue entry. |
| INT sQEntryJobStatus | 1.3.6.1.4.1.597.4.3.1.5.4.1.3 | INTEGER | read-only | Queue status indicates the current settings of the queue status flags. This value is a bit vector which, when set, corresponds to the following characteristic: Bit Description 0 Job is aborting 1 Job is executing 2 Job is holding for /HOLD 3 Job is inaccessible 4 Job was refused by symbiont 5 Job will requeue after abort (intentionally not documented) 6 Job started execution at least once (intentionally not documented) 7 Job was retained by /RETAIN 8 Job is starting 9 Job is holding for /AFTER 10 Job is suspended by STOP/QUEUE command 11 Job is pending 12 Job does not yet exist in db or is being removed from db 13 Current job on stalled queue 14 Job was processed by the symbiont but further processing is necessary 15 Job has been completely processed |
| INT sQEntryNum | 1.3.6.1.4.1.597.4.3.1.5.4.1.1 | INTEGER | read-only | The queue entry number of this job. |
| sQEntryTbl | 1.3.6.1.4.1.597.4.3.1.5.4 | not-accessible | Table of queue entry information. | |
| INT sQIndex | 1.3.6.1.4.1.597.4.3.1.5.3.1.1 | INTEGER | read-only | Location in the queue table. |
| sQMan | 1.3.6.1.4.1.597.4.3.1.5.11 | |||
| INT sQManCount | 1.3.6.1.4.1.597.4.3.1.5.11.1 | INTEGER | read-only | Number of entries in the queue manager table. |
| INT sQManIndex | 1.3.6.1.4.1.597.4.3.1.5.11.2.1.1 | INTEGER | read-only | Location in the queue manager table. |
| STR sQManName | 1.3.6.1.4.1.597.4.3.1.5.11.2.1.2 | DisplayString | read-only | Name of the queue manager. |
| INT sQManStatus | 1.3.6.1.4.1.597.4.3.1.5.11.2.1.3 | INTEGER | read-only | Queue manager status indicates the current settings of the queue manger status flags. This value is a bit vector which, when set, corresponds to the following characteristic: Bit Description 0 Start pending 1 Starting 2 Running 3 Failover 4 Stopping 5 Stopped |
| sQManTbl | 1.3.6.1.4.1.597.4.3.1.5.11.2 | not-accessible | Table of queue manager information. | |
| sQManTblEntry | 1.3.6.1.4.1.597.4.3.1.5.11.2.1 | not-accessible | A row in the queue manager table. | |
| INT sQMonitor | 1.3.6.1.4.1.597.4.3.1.5.3.1.3 | INTEGER | read-write | Indicates if the queue and its entries are currently being monitored. A value of true(1) indicates that this queue and its entries are currently being monitored. A value of false(2) indicates that monitoring is currently disabled on this queue and its entries. |
| STR sQName | 1.3.6.1.4.1.597.4.3.1.5.3.1.2 | DisplayString | read-only | Name of the queue. |
| INT sQStatus | 1.3.6.1.4.1.597.4.3.1.5.3.1.4 | INTEGER | read-only | Queue status indicates the current settings of the queue status flags. This value is a bit vector which, when set, corresponds to the following characteristic: Bit Description 0 Queue is aligning 1 Queue is idle: no jobs executing and none available for execution 2 Lowercase device 3 Queue is doing /OPERATOR (intentionally not documented) 4 Queue is paused 5 Queue is pausing 6 Remote device 7 Incomplete remote request to reset (OBSOLETE) 8 Queue is resuming from paused state 9 /DEVICE=SERVER or reported to be a served queue by the symbiont 10 Device is stalled 11 Queue is starting 12 Queue is stopped 13 Queue is stopping 14 Device is unavailable 15 Queue is closed 16 Queue is executing as many jobs as it is capable of executing 17 Queue does not yet exist in db or is being removed from db 18 At least one job is executing, but the queue is capable of executing more 19 Queue is not able to accept or process jobs; its QSIs are inactive 20 AUTOSTART queue explicitly stopped 21 Queue will be stopped when work currently in progress has completed |
| sQTbl | 1.3.6.1.4.1.597.4.3.1.5.3 | not-accessible | Table of queue information. | |
| sQTblEntry | 1.3.6.1.4.1.597.4.3.1.5.3.1 | not-accessible | A row in the queue table. | |
| sQue | 1.3.6.1.4.1.597.4.3.1.5 | |||
| sQueBatch | 1.3.6.1.4.1.597.4.3.1.5.5 | |||
| INT sQueBatchExecuting | 1.3.6.1.4.1.597.4.3.1.5.5.2 | INTEGER | read-only | Number of executing jobs in the batch queue. |
| INT sQueBatchHolding | 1.3.6.1.4.1.597.4.3.1.5.5.4 | INTEGER | read-only | Number of holding jobs in the batch queue. |
| INT sQueBatchPending | 1.3.6.1.4.1.597.4.3.1.5.5.1 | INTEGER | read-only | Number of pending jobs in the batch queue. |
| INT sQueBatchRetained | 1.3.6.1.4.1.597.4.3.1.5.5.5 | INTEGER | read-only | Number of retained jobs in the batch queue. |
| INT sQueBatchTimed | 1.3.6.1.4.1.597.4.3.1.5.5.3 | INTEGER | read-only | Number of timed jobs in the batch queue. |
| INT sQueCnt | 1.3.6.1.4.1.597.4.3.1.5.1 | INTEGER | read-only | Number of queues currently being monitored. This number is the number of queue names found in the sCfgQueFile file. |
| sQueGeneric | 1.3.6.1.4.1.597.4.3.1.5.6 | |||
| INT sQueGenericExecuting | 1.3.6.1.4.1.597.4.3.1.5.6.2 | INTEGER | read-only | Number of executing jobs in generic queues. |
| INT sQueGenericHolding | 1.3.6.1.4.1.597.4.3.1.5.6.4 | INTEGER | read-only | Number of holding jobs in generic queues. |
| INT sQueGenericPending | 1.3.6.1.4.1.597.4.3.1.5.6.1 | INTEGER | read-only | Number of pending jobs in generic queues. |
| INT sQueGenericRetained | 1.3.6.1.4.1.597.4.3.1.5.6.5 | INTEGER | read-only | Number of retained jobs in generic queues. |
| INT sQueGenericTimed | 1.3.6.1.4.1.597.4.3.1.5.6.3 | INTEGER | read-only | Number of timed jobs in generic queues. |
| sQuePrinter | 1.3.6.1.4.1.597.4.3.1.5.7 | |||
| INT sQuePrinterExecuting | 1.3.6.1.4.1.597.4.3.1.5.7.2 | INTEGER | read-only | Number of executing jobs in printer queues. |
| INT sQuePrinterHolding | 1.3.6.1.4.1.597.4.3.1.5.7.4 | INTEGER | read-only | Number of holding jobs in printer queues. |
| INT sQuePrinterPending | 1.3.6.1.4.1.597.4.3.1.5.7.1 | INTEGER | read-only | Number of pending jobs in printer queues. |
| INT sQuePrinterRetained | 1.3.6.1.4.1.597.4.3.1.5.7.5 | INTEGER | read-only | Number of retained jobs in printer queues. |
| INT sQuePrinterTimed | 1.3.6.1.4.1.597.4.3.1.5.7.3 | INTEGER | read-only | Number of timed jobs in printer queues. |
| sQueServer | 1.3.6.1.4.1.597.4.3.1.5.8 | |||
| INT sQueServerExecuting | 1.3.6.1.4.1.597.4.3.1.5.8.2 | INTEGER | read-only | Number of executing jobs in server queues. |
| INT sQueServerHolding | 1.3.6.1.4.1.597.4.3.1.5.8.4 | INTEGER | read-only | Number of holding jobs in server queues. |
| INT sQueServerPending | 1.3.6.1.4.1.597.4.3.1.5.8.1 | INTEGER | read-only | Number of pending jobs in server queues. |
| INT sQueServerRetained | 1.3.6.1.4.1.597.4.3.1.5.8.5 | INTEGER | read-only | Number of retained jobs in server queues. |
| INT sQueServerTimed | 1.3.6.1.4.1.597.4.3.1.5.8.3 | INTEGER | read-only | Number of timed jobs in server queues. |
| sQueSymbiont | 1.3.6.1.4.1.597.4.3.1.5.9 | |||
| INT sQueSymbiontExecuting | 1.3.6.1.4.1.597.4.3.1.5.9.2 | INTEGER | read-only | Number of executing jobs in symbiont queues. |
| INT sQueSymbiontHolding | 1.3.6.1.4.1.597.4.3.1.5.9.4 | INTEGER | read-only | Number of holding jobs in symbiont queues. |
| INT sQueSymbiontPending | 1.3.6.1.4.1.597.4.3.1.5.9.1 | INTEGER | read-only | Number of pending jobs in symbiont queues. |
| INT sQueSymbiontRetained | 1.3.6.1.4.1.597.4.3.1.5.9.5 | INTEGER | read-only | Number of retained jobs in symbiont queues. |
| INT sQueSymbiontTimed | 1.3.6.1.4.1.597.4.3.1.5.9.3 | INTEGER | read-only | Number of timed jobs in symbiont queues. |
| sQueTerminal | 1.3.6.1.4.1.597.4.3.1.5.10 | |||
| INT sQueTerminalExecuting | 1.3.6.1.4.1.597.4.3.1.5.10.2 | INTEGER | read-only | Number of executing jobs in terminal queues. |
| INT sQueTerminalHolding | 1.3.6.1.4.1.597.4.3.1.5.10.4 | INTEGER | read-only | Number of holding jobs in terminal queues. |
| INT sQueTerminalPending | 1.3.6.1.4.1.597.4.3.1.5.10.1 | INTEGER | read-only | Number of pending jobs in terminal queues. |
| INT sQueTerminalRetained | 1.3.6.1.4.1.597.4.3.1.5.10.5 | INTEGER | read-only | Number of retained jobs in terminal queues. |
| INT sQueTerminalTimed | 1.3.6.1.4.1.597.4.3.1.5.10.3 | INTEGER | read-only | Number of timed jobs in terminal queues. |
| TIK sQueTime | 1.3.6.1.4.1.597.4.3.1.5.2 | TimeTicks | read-only | Subagent up time (sCfgUpTime) when queue statistics (sQTbl) were last gathered. sCfgQueTimer controls how often queue statistics are gathered. |
| sResources | 1.3.6.1.4.1.597.4.3.1 | |||
| sShd | 1.3.6.1.4.1.597.4.3.1.4 | |||
| INT sShdCopy | 1.3.6.1.4.1.597.4.3.1.4.1.1.4 | INTEGER | read-only | Indicator for shadow set catch-up copying. A value of true(1) indicates that this member is in a catch-up copy state. |
| sShdEntry | 1.3.6.1.4.1.597.4.3.1.4.1.1 | not-accessible | A row in the shadow table. The combination of the sDskIndex and sShdIndex indices relates each shadow set table entry (sShdEntry) to its virtual unit entry in the disk table (sDskTbl). | |
| INT sShdFail | 1.3.6.1.4.1.597.4.3.1.4.1.1.3 | INTEGER | read-only | Indicator for shadow set member failure. A value of true(1) indicates that this member has failed out of the shadow set. |
| INT sShdIndex | 1.3.6.1.4.1.597.4.3.1.4.1.1.1 | INTEGER | read-only | Location in the shadow set table. |
| INT sShdMerge | 1.3.6.1.4.1.597.4.3.1.4.1.1.5 | INTEGER | read-only | Indicator for shadow set member merge. A value of true(1) indicates that this member is in a merge state. |
| STR sShdName | 1.3.6.1.4.1.597.4.3.1.4.1.1.2 | DisplayString | read-only | Device name of the shadow set disk. |
| sShdTbl | 1.3.6.1.4.1.597.4.3.1.4.1 | not-accessible | Table of shadow set information. | |
| INT sSpinFifteen | 1.3.6.1.4.1.597.4.3.1.2.6.7 | INTEGER | read-only | Number of ticks spent in Spin mode during the past fifteen minutes. |
| INT sSpinFive | 1.3.6.1.4.1.597.4.3.1.2.5.7 | INTEGER | read-only | Number of ticks spent in Spin mode during the past five minutes. |
| INT sSpinOne | 1.3.6.1.4.1.597.4.3.1.2.4.7 | INTEGER | read-only | Number of interval timer ticks in mpsynch mode (i.e., Kernel mode on kernel or interrupt stack, when spinlock busy wait is active) for all CPUs during the last one minute interval. |
| INT sSuprFifteen | 1.3.6.1.4.1.597.4.3.1.2.6.3 | INTEGER | read-only | Number of ticks spent in Supervisor mode during the past fifteen minutes. |
| INT sSuprFive | 1.3.6.1.4.1.597.4.3.1.2.5.3 | INTEGER | read-only | Number of ticks spent in Supervisor mode during the past five minutes. |
| INT sSuprOne | 1.3.6.1.4.1.597.4.3.1.2.4.3 | INTEGER | read-only | Number of interval timer ticks in Supervisor mode for all CPUs during the last one minute interval. |
| STR sSwErrFile | 1.3.6.1.4.1.597.4.3.4.2.2 | DisplayString | read-only | The file name of the software element which generated the latest software status code. |
| sSwErrInfo | 1.3.6.1.4.1.597.4.3.4.2 | |||
| TIK sSwErrLastTime | 1.3.6.1.4.1.597.4.3.4.2.4 | TimeTicks | read-only | sCfgUpTime when the most recent software status code was generated. |
| INT sSwErrLineNum | 1.3.6.1.4.1.597.4.3.4.2.3 | INTEGER | read-only | The line number in the file which generated the latest software status code. |
| STR sSwErrMessage | 1.3.6.1.4.1.597.4.3.4.2.5 | DisplayString | read-only | Description of the latest software error. |
| INT sSwErrStatus | 1.3.6.1.4.1.597.4.3.4.2.1 | INTEGER | read-only | The latest software status code. |
| sSyi | 1.3.6.1.4.1.597.4.3.1.1 | |||
| INT sSyiActiveCpuCnt | 1.3.6.1.4.1.597.4.3.1.1.7 | INTEGER | read-only | Number of active CPUs. |
| INT sSyiAvailCpuCnt | 1.3.6.1.4.1.597.4.3.1.1.6 | INTEGER | read-only | The number of CPUs which were available at system bootstrap. This value is static. |
| STR sSyiBootTime | 1.3.6.1.4.1.597.4.3.1.1.3 | DisplayString | read-only | The date and time when the system was booted. This value is in the form dd-mmm-yyyy hh:mm:ss.cc. |
| INT sSyiCpuPgSize | 1.3.6.1.4.1.597.4.3.1.1.14 | INTEGER | read-only | The number of CPU-specific bytes per page in the system. On VAX systems, this value is always 512. On Alpha systems, CPU page size varies from system to system. |
| STR sSyiHwName | 1.3.6.1.4.1.597.4.3.1.1.2 | DisplayString | read-only | The hardware model name. |
| INT sSyiMemFreePg | 1.3.6.1.4.1.597.4.3.1.1.16 | INTEGER | read-only | Number of free pages of physical memory on the system. |
| INT sSyiMemSize | 1.3.6.1.4.1.597.4.3.1.1.5 | INTEGER | read-only | The total number of pages of physical memory in the system configuration. This value is static. |
| INT sSyiMemUsed | 1.3.6.1.4.1.597.4.3.1.1.17 | INTEGER | read-only | Physical memory percentage used. |
| STR sSyiNodeName | 1.3.6.1.4.1.597.4.3.1.1.1 | DisplayString | read-only | The name of the node. |
| INT sSyiPgFree | 1.3.6.1.4.1.597.4.3.1.1.9 | INTEGER | read-only | The number of free pages in the currently installed page files. |
| INT sSyiPgSize | 1.3.6.1.4.1.597.4.3.1.1.8 | INTEGER | read-only | The number of pages in the currently installed page files. |
| INT sSyiPgUsedPercent | 1.3.6.1.4.1.597.4.3.1.1.10 | INTEGER | read-only | The percent full of the currently installed page files. |
| INT sSyiSwpFree | 1.3.6.1.4.1.597.4.3.1.1.12 | INTEGER | read-only | The number of free pages in the currently installed swapping files. |
| INT sSyiSwpSize | 1.3.6.1.4.1.597.4.3.1.1.11 | INTEGER | read-only | The number of pages in the currently installed swapping files. |
| INT sSyiSwpUsedPercent | 1.3.6.1.4.1.597.4.3.1.1.13 | INTEGER | read-only | The percent full of the currently installed swapping files. |
| TIK sSyiTime | 1.3.6.1.4.1.597.4.3.1.1.15 | TimeTicks | read-only | Subagent up time (sCfgUpTime) when system information (sSyi) was last gathered. sCfgSysInfoTimer controls how often system statistics are gathered. |
| STR sSyiVersion | 1.3.6.1.4.1.597.4.3.1.1.4 | DisplayString | read-only | The software version number of the OpenVMS operating system running on the node. |
| sTrapInfo | 1.3.6.1.4.1.597.4.3.3 | |||
| INT sTrapLastSeqNumSent | 1.3.6.1.4.1.597.4.3.3.4 | INTEGER | read-only | Sequence number of the last trap sent. This value may be compared to sTrapNextSeqNum to determine if a backlog of traps exists. If this value is one less than sTrapNextSeqNum, then no backlog exists. A backlog of traps may exist if more traps are generated per second than may be sent (as specified by the variable sCfgMaxTrapSec). |
| CTR sTrapLostCount | 1.3.6.1.4.1.597.4.3.3.5 | Counter | read-only | This variable indicates the number of traps that have been lost. A trap is considered to be lost if it is overwritten in the internal trap table before it is sent to the NMS. This may occur if the trap table is not large enough (see sCfgTrapTblSize) to hold all of unsent traps. How quickly traps are sent to the NMS is governed by the sCfgMaxTrapSec variable. To prevent trap loss, set these two variables so that the trap backlog does not overflow the trap table and so that traps do not flood the network. |
| INT sTrapNextSeqNum | 1.3.6.1.4.1.597.4.3.3.1 | INTEGER | read-only | The next sequence number in the trap table. When this variable is sent as part of a trap, it identifies the sequence number assigned to that trap. This is a 32-bit value and will wrap after 4294967295. |
| INT sTrapResendSeqNum | 1.3.6.1.4.1.597.4.3.3.3 | INTEGER | read-write | Sequence number of a trap message to be resent to the manager. Setting this variable to a trap sequence number causes the specified trap message to be resent. If the set-request contains a number that is not available (the number of items retained in the trap table is dependent on the value of sCfgTrapTblSize), an error indicator will be returned. |
| TIK sTrapTime | 1.3.6.1.4.1.597.4.3.3.2 | TimeTicks | read-only | Subagent up time (sCfgUpTime) when the trap was created. |
| INT sUserFifteen | 1.3.6.1.4.1.597.4.3.1.2.6.4 | INTEGER | read-only | Number of ticks spent in User mode during the past fifteen minutes. |
| INT sUserFive | 1.3.6.1.4.1.597.4.3.1.2.5.4 | INTEGER | read-only | Number of ticks spent in User mode during the past five minutes. |
| INT sUserOne | 1.3.6.1.4.1.597.4.3.1.2.4.4 | INTEGER | read-only | Number of interval timer ticks in User mode for all CPUs during the last one minute interval. |
| vmsCluster | 1.3.6.1.4.1.597.4.15.8 | |||
| INT vmsClusterCpuBusy | 1.3.6.1.4.1.597.4.15.8.3 | INTEGER | read-only | Count of clock ticks (10-millisecond units) spent in all CPU modes since system was booted. |
| CTR vmsClusterDeqIncoming | 1.3.6.1.4.1.597.4.15.8.13 | Counter | read-only | Count of unlock requests (incoming). |
| CTR vmsClusterDeqLocal | 1.3.6.1.4.1.597.4.15.8.12 | Counter | read-only | Count of unlock requests (local). |
| CTR vmsClusterDeqOutgoing | 1.3.6.1.4.1.597.4.15.8.14 | Counter | read-only | Count of unlock requests (outgoing). |
| CTR vmsClusterEnqConversionsIncoming | 1.3.6.1.4.1.597.4.15.8.10 | Counter | read-only | Count of lock conversion requests (incoming). |
| CTR vmsClusterEnqConversionsLocal | 1.3.6.1.4.1.597.4.15.8.9 | Counter | read-only | Count of lock conversion requests (local). |
| CTR vmsClusterEnqConversionsOutgoing | 1.3.6.1.4.1.597.4.15.8.11 | Counter | read-only | Count of lock conversion requests (outgoing). |
| INT vmsClusterFreeListSize | 1.3.6.1.4.1.597.4.15.8.4 | INTEGER | read-only | Number of pages currently on the free list. |
| CTR vmsClusterNewEnqIncoming | 1.3.6.1.4.1.597.4.15.8.7 | Counter | read-only | Count of new lock requests that originate on other systems and are performed on this system (incoming). |
| CTR vmsClusterNewEnqLocal | 1.3.6.1.4.1.597.4.15.8.6 | Counter | read-only | Count of new lock requests that originate and are performed on the system. |
| CTR vmsClusterNewEnqOutgoing | 1.3.6.1.4.1.597.4.15.8.8 | Counter | read-only | Count of new lock requests that originate on this system and are performed on other systems (outgoing). |
| INT vmsClusterTotalLocks | 1.3.6.1.4.1.597.4.15.8.5 | INTEGER | read-only | Total of all incoming, outgoing, and local ENQs, DEQs, and conversions. |
| INT vmsClusterUpdateInterval | 1.3.6.1.4.1.597.4.15.8.2 | INTEGER | read-write | How often cluster statistics are to be gathered. A value of 0 disables gathering of cluster statistics. This value is expressed in minutes. |
| TIK vmsClusterUpdateTime | 1.3.6.1.4.1.597.4.15.8.1 | TimeTicks | read-only | Time when cluster statistics were last updated. |
| vmsDecnet | 1.3.6.1.4.1.597.4.15.6 | |||
| CTR vmsDecnetArriveLocalPkt | 1.3.6.1.4.1.597.4.15.6.3 | Counter | read-only | Count of arriving local packets. |
| CTR vmsDecnetArriveTransPkt | 1.3.6.1.4.1.597.4.15.6.5 | Counter | read-only | Count of arriving transit packets. |
| CTR vmsDecnetDepartLocalPkt | 1.3.6.1.4.1.597.4.15.6.4 | Counter | read-only | Count of departing local packets. |
| CTR vmsDecnetReceiveBufFail | 1.3.6.1.4.1.597.4.15.6.7 | Counter | read-only | Count of receiver buffer failures . |
| CTR vmsDecnetTransCongestLoss | 1.3.6.1.4.1.597.4.15.6.6 | Counter | read-only | Count of packets lost because of transit congestion. |
| INT vmsDecnetUpdateInterval | 1.3.6.1.4.1.597.4.15.6.2 | INTEGER | read-write | How often DECnet statistics are to be gathered. A value of 0 disables gathering of DECnet statistics. This value is expressed in minutes. |
| TIK vmsDecnetUpdateTime | 1.3.6.1.4.1.597.4.15.6.1 | TimeTicks | read-only | Time when DECnet statistics were last gathered. |
| vmsDlock | 1.3.6.1.4.1.597.4.15.11 | |||
| CTR vmsDlockBlockingASTsIncoming | 1.3.6.1.4.1.597.4.15.11.13 | Counter | read-only | Count of lock manager blocking ASTs (incoming). |
| CTR vmsDlockBlockingASTsLocal | 1.3.6.1.4.1.597.4.15.11.12 | Counter | read-only | Count of lock manager blocking ASTs (local). |
| CTR vmsDlockBlockingASTsOutgoing | 1.3.6.1.4.1.597.4.15.11.14 | Counter | read-only | Count of lock manager blocking ASTs (outgoing). |
| CTR vmsDlockDeadlockMessage | 1.3.6.1.4.1.597.4.15.11.17 | Counter | read-only | Count of incoming and outgoing lock manager messages required for deadlock detection. |
| CTR vmsDlockDirFuncIncoming | 1.3.6.1.4.1.597.4.15.11.15 | Counter | read-only | Count of directory functions (incoming). |
| CTR vmsDlockDirFuncOutgoing | 1.3.6.1.4.1.597.4.15.11.16 | Counter | read-only | Count of directory functions (outgoing). |
| CTR vmsDlockLockConversionsIncoming | 1.3.6.1.4.1.597.4.15.11.7 | Counter | read-only | Count of lock conversion requests (incoming). |
| CTR vmsDlockLockConversionsLocal | 1.3.6.1.4.1.597.4.15.11.6 | Counter | read-only | Count of lock conversion requests (local). |
| CTR vmsDlockLockConversionsOutgoing | 1.3.6.1.4.1.597.4.15.11.8 | Counter | read-only | Count of lock conversion requests (outgoing). |
| CTR vmsDlockNewLocksIncoming | 1.3.6.1.4.1.597.4.15.11.4 | Counter | read-only | Count of new lock requests originating on another system and performed on this system (incoming). |
| CTR vmsDlockNewLocksLocal | 1.3.6.1.4.1.597.4.15.11.3 | Counter | read-only | Count of new lock requests that originate and are performed on this system (local). |
| CTR vmsDlockNewLocksOutgoing | 1.3.6.1.4.1.597.4.15.11.5 | Counter | read-only | Count of new lock requests originating on this system and performed on another system (outgoing). |
| CTR vmsDlockUnlocksIncoming | 1.3.6.1.4.1.597.4.15.11.10 | Counter | read-only | Count of unlock requests (incoming). |
| CTR vmsDlockUnlocksLocal | 1.3.6.1.4.1.597.4.15.11.9 | Counter | read-only | Count of unlock requests (local). |
| CTR vmsDlockUnlocksOutgoing | 1.3.6.1.4.1.597.4.15.11.11 | Counter | read-only | Count of unlock requests (outgoing). |
| INT vmsDlockUpdateInterval | 1.3.6.1.4.1.597.4.15.11.2 | INTEGER | read-write | How often Lock statistics are to be gathered. A value of 0 disables gathering of dlock statistics. This value is expressed in minutes. |
| TIK vmsDlockUpdateTime | 1.3.6.1.4.1.597.4.15.11.1 | TimeTicks | read-only | Time when Distributed Lock statistics were last updated. |
| vmsFcp | 1.3.6.1.4.1.597.4.15.3 | |||
| CTR vmsFcpAllocation | 1.3.6.1.4.1.597.4.15.3.4 | Counter | read-only | Count of QIO requests that caused allocation of disk space. |
| CTR vmsFcpCPUTick | 1.3.6.1.4.1.597.4.15.3.9 | Counter | read-only | Count of clock ticks (10-millisecond units) of CPU time used by the file system. |
| CTR vmsFcpCreate | 1.3.6.1.4.1.597.4.15.3.5 | Counter | read-only | Count of new files created. |
| CTR vmsFcpDiskRead | 1.3.6.1.4.1.597.4.15.3.6 | Counter | read-only | Count of read I/O operations from the disk by the file system. |
| CTR vmsFcpDiskWrite | 1.3.6.1.4.1.597.4.15.3.7 | Counter | read-only | Count of write I/O operations to the disk by the file system. |
| CTR vmsFcpErase | 1.3.6.1.4.1.597.4.15.3.14 | Counter | read-only | Count of erase I/O operations issued. |
| CTR vmsFcpFCPCall | 1.3.6.1.4.1.597.4.15.3.3 | Counter | read-only | Count of QIO requests received by the file system. |
| CTR vmsFcpLookup | 1.3.6.1.4.1.597.4.15.3.12 | Counter | read-only | Count of file name lookup operations in file directories. |
| CTR vmsFcpOpen | 1.3.6.1.4.1.597.4.15.3.13 | Counter | read-only | Count of files opened. |
| CTR vmsFcpPageFault | 1.3.6.1.4.1.597.4.15.3.10 | Counter | read-only | Count of page faults for the file system. |
| INT vmsFcpUpdateInterval | 1.3.6.1.4.1.597.4.15.3.2 | INTEGER | read-write | How often FCP statistics are to be gathered. A value of 0 disables gathering of File System statistics. This value is expressed in minutes. |
| TIK vmsFcpUpdateTime | 1.3.6.1.4.1.597.4.15.3.1 | TimeTicks | read-only | Time when FCP statistics were last updated. |
| CTR vmsFcpVolumeLockWait | 1.3.6.1.4.1.597.4.15.3.8 | Counter | read-only | Number of times a wait state was entered by the XQP due to volume lock contention. |
| CTR vmsFcpWindowTurn | 1.3.6.1.4.1.597.4.15.3.11 | Counter | read-only | Count of file-map window misses. |
| vmsFile | 1.3.6.1.4.1.597.4.15.2 | |||
| CTR vmsFileBitmapAttempt | 1.3.6.1.4.1.597.4.15.2.16 | Counter | read-only | Count of attempts on storage bitmap cache. |
| CTR vmsFileBitmapHit | 1.3.6.1.4.1.597.4.15.2.15 | Counter | read-only | Count of hits on storage bitmap cache. |
| CTR vmsFileDirDataAttempt | 1.3.6.1.4.1.597.4.15.2.6 | Counter | read-only | Count of attempts on directory data cache. |
| CTR vmsFileDirDataHit | 1.3.6.1.4.1.597.4.15.2.5 | Counter | read-only | Count of hits on directory data cache. |
| CTR vmsFileDirFCBAttempt | 1.3.6.1.4.1.597.4.15.2.4 | Counter | read-only | Count of attempts on directory FCB cache. |
| CTR vmsFileDirFCBHit | 1.3.6.1.4.1.597.4.15.2.3 | Counter | read-only | Count of hits on directory FCB cache. |
| CTR vmsFileExtentAttempt | 1.3.6.1.4.1.597.4.15.2.12 | Counter | read-only | Count of attempts on extent cache. |
| CTR vmsFileExtentHit | 1.3.6.1.4.1.597.4.15.2.11 | Counter | read-only | Count of hits on extent cache. |
| CTR vmsFileFileHdrAttempt | 1.3.6.1.4.1.597.4.15.2.8 | Counter | read-only | Count of attempts on file header cache. |
| CTR vmsFileFileHdrHit | 1.3.6.1.4.1.597.4.15.2.7 | Counter | read-only | Count of hits on file header cache. |
| CTR vmsFileFileIdAttempt | 1.3.6.1.4.1.597.4.15.2.10 | Counter | read-only | Count of attempts on file ID cache. |
| CTR vmsFileFileIdHit | 1.3.6.1.4.1.597.4.15.2.9 | Counter | read-only | Count of hits on file ID cache. |
| CTR vmsFileQuotaAttempt | 1.3.6.1.4.1.597.4.15.2.14 | Counter | read-only | Count of attempts on quota cache. |
| CTR vmsFileQuotaHit | 1.3.6.1.4.1.597.4.15.2.13 | Counter | read-only | Count of hits on quota cache. |
| INT vmsFileUpdateInterval | 1.3.6.1.4.1.597.4.15.2.2 | INTEGER | read-write | How often File System statistics are to be gathered. A value of 0 disables gathering of File System statistics. This value is expressed in minutes. |
| TIK vmsFileUpdateTime | 1.3.6.1.4.1.597.4.15.2.1 | TimeTicks | read-only | Time when File System statistics were last updated. |
| vmsIo | 1.3.6.1.4.1.597.4.15.4 | |||
| CTR vmsIoBufferedIO | 1.3.6.1.4.1.597.4.15.4.4 | Counter | read-only | Count of buffered I/O operations. |
| CTR vmsIoDirectIO | 1.3.6.1.4.1.597.4.15.4.3 | Counter | read-only | Count of direct I/O operations. |
| CTR vmsIoFileOpen | 1.3.6.1.4.1.597.4.15.4.8 | Counter | read-only | Count of files opened . |
| CTR vmsIoFreePageCount | 1.3.6.1.4.1.597.4.15.4.15 | Counter | read-only | Number of pages currently on free-page list. |
| CTR vmsIoInswap | 1.3.6.1.4.1.597.4.15.4.14 | Counter | read-only | Count of working sets read into memory from the swap file. |
| CTR vmsIoLogNameTranslation | 1.3.6.1.4.1.597.4.15.4.7 | Counter | read-only | Count of logical name translations. |
| CTR vmsIoMailboxWrite | 1.3.6.1.4.1.597.4.15.4.5 | Counter | read-only | Count of write-to-mailbox requests. |
| CTR vmsIoModifiedPageCount | 1.3.6.1.4.1.597.4.15.4.16 | Counter | read-only | Number of pages currently on modified-page list. |
| CTR vmsIoPageFault | 1.3.6.1.4.1.597.4.15.4.9 | Counter | read-only | Count of page faults for all working sets . |
| CTR vmsIoPageRead | 1.3.6.1.4.1.597.4.15.4.10 | Counter | read-only | Count of pages read from disk as a result of page faults. |
| CTR vmsIoPageReadIO | 1.3.6.1.4.1.597.4.15.4.11 | Counter | read-only | Count of read I/O operations from disk as a result of page faults. |
| CTR vmsIoPageWrite | 1.3.6.1.4.1.597.4.15.4.12 | Counter | read-only | Count of pages written to the page file. |
| CTR vmsIoPageWriteIO | 1.3.6.1.4.1.597.4.15.4.13 | Counter | read-only | Count of write I/O operations to the page file. |
| CTR vmsIoSplitTransfer | 1.3.6.1.4.1.597.4.15.4.6 | Counter | read-only | Count of split transfers. |
| INT vmsIoUpdateInterval | 1.3.6.1.4.1.597.4.15.4.2 | INTEGER | read-write | How often I/O statistics are to be gathered. A value of 0 disables gathering of I/O statistics. This value is expressed in minutes. |
| TIK vmsIoUpdateTime | 1.3.6.1.4.1.597.4.15.4.1 | TimeTicks | read-only | Time when I/O statistics were last updated. |
| vmsLock | 1.3.6.1.4.1.597.4.15.10 | |||
| CTR vmsLockBlockingASTs | 1.3.6.1.4.1.597.4.15.10.6 | Counter | read-only | Count of blocking ASTs queued. |
| CTR vmsLockConvertedEnqs | 1.3.6.1.4.1.597.4.15.10.4 | Counter | read-only | Count of converted ENQ (lock) requests. |
| INT vmsLockCurrentLocks | 1.3.6.1.4.1.597.4.15.10.11 | INTEGER | read-only | Number of locks currently in the system. |
| INT vmsLockCurrentResources | 1.3.6.1.4.1.597.4.15.10.12 | INTEGER | read-only | Number of resources currently in the system. |
| CTR vmsLockDeadlockSearches | 1.3.6.1.4.1.597.4.15.10.9 | Counter | read-only | Count of times that a deadlock search was performed. |
| CTR vmsLockDeadlocksFound | 1.3.6.1.4.1.597.4.15.10.10 | Counter | read-only | Count of times that a deadlock was found. |
| CTR vmsLockDeqs | 1.3.6.1.4.1.597.4.15.10.5 | Counter | read-only | Count of DEQ (unlock) requests. |
| CTR vmsLockEnqsNotQueued | 1.3.6.1.4.1.597.4.15.10.8 | Counter | read-only | Count of times a lock could not be granted immediately and got an error status instead of waiting. |
| CTR vmsLockEnqWaits | 1.3.6.1.4.1.597.4.15.10.7 | Counter | read-only | Count of times a lock could not be granted immediately and waited. |
| CTR vmsLockNewEnqs | 1.3.6.1.4.1.597.4.15.10.3 | Counter | read-only | Count of new ENQ (lock) requests. |
| INT vmsLockUpdateInterval | 1.3.6.1.4.1.597.4.15.10.2 | INTEGER | read-write | How often Lock statistics are to be gathered. A value of 0 disables gathering of lock statistics. This value is expressed in minutes. |
| TIK vmsLockUpdateTime | 1.3.6.1.4.1.597.4.15.10.1 | TimeTicks | read-only | Time when Lock statistics were last updated. |
| INT vmsModeCompat | 1.3.6.1.4.1.597.4.15.1.4.1.8 | INTEGER | read-only | Number of clock ticks this CPU has spent in Compatibility mode since the system was booted. |
| CTR vmsModeCpuCount | 1.3.6.1.4.1.597.4.15.1.3 | Counter | read-only | Number of entries in the CPU Mode table (i.e., the number of CPUs being monitored). |
| INT vmsModeCpuId | 1.3.6.1.4.1.597.4.15.1.4.1.1 | INTEGER | read-only | CPU ID for mode data in this row in the mode table. |
| INT vmsModeExec | 1.3.6.1.4.1.597.4.15.1.4.1.3 | INTEGER | read-only | Number of clock ticks this CPU has spent in Executive mode since the system was booted. |
| INT vmsModeIdle | 1.3.6.1.4.1.597.4.15.1.4.1.9 | INTEGER | read-only | Number of clock ticks this CPU has spent executing the NULL process since the system was booted. |
| INT vmsModeInter | 1.3.6.1.4.1.597.4.15.1.4.1.6 | INTEGER | read-only | Number of clock ticks (10-millisecond units) this CPU has spent on the Interrupt stack since the system was booted. |
| INT vmsModeKernel | 1.3.6.1.4.1.597.4.15.1.4.1.2 | INTEGER | read-only | Number of clock ticks this CPU has spent in kernel mode (excluding interrupt stack time) since the system was booted. |
| INT vmsModeMPSync | 1.3.6.1.4.1.597.4.15.1.4.1.7 | INTEGER | read-only | Number of clock ticks this CPU has spent synchronizing multiple CPUs since the system was booted. |
| vmsModes | 1.3.6.1.4.1.597.4.15.1 | |||
| INT vmsModeSuper | 1.3.6.1.4.1.597.4.15.1.4.1.4 | INTEGER | read-only | Number of clock ticks this CPU has spent in Supervisor mode since the system was booted. |
| vmsModeTable | 1.3.6.1.4.1.597.4.15.1.4 | not-accessible | Table description. | |
| vmsModeTableEntry | 1.3.6.1.4.1.597.4.15.1.4.1 | not-accessible | Row in table description. | |
| INT vmsModeUpdateInterval | 1.3.6.1.4.1.597.4.15.1.2 | INTEGER | read-write | How often CPU mode statistics are to be gathered. A value of 0 disables gathering of CPU mode statistics. This value is expressed in minutes. |
| TIK vmsModeUpdateTime | 1.3.6.1.4.1.597.4.15.1.1 | TimeTicks | read-only | Time when CPU mode statistics were last gathered. |
| INT vmsModeUser | 1.3.6.1.4.1.597.4.15.1.4.1.5 | INTEGER | read-only | Number of clock ticks this CPU has spent in User mode (excluding compatibility-mode time) since the system was booted. |
| vmsMscp | 1.3.6.1.4.1.597.4.15.9 | |||
| CTR vmsMscp16_31BlockIOs | 1.3.6.1.4.1.597.4.15.9.13 | Counter | read-only | Count of I/O requests with a length of 16 to 31 blocks. |
| CTR vmsMscp1BlockIOs | 1.3.6.1.4.1.597.4.15.9.9 | Counter | read-only | Count of I/O requests with a length of one block. |
| CTR vmsMscp2_3BlockIOs | 1.3.6.1.4.1.597.4.15.9.10 | Counter | read-only | Count of I/O requests with a length of 2 to 3 blocks. |
| CTR vmsMscp32_63BlockIOs | 1.3.6.1.4.1.597.4.15.9.14 | Counter | read-only | Count of I/O requests with a length of 32 to 63 blocks. |
| CTR vmsMscp4_7BlockIOs | 1.3.6.1.4.1.597.4.15.9.11 | Counter | read-only | Count of I/O requests with a length of 4 to 7 blocks. |
| CTR vmsMscp64andOverBlockIOs | 1.3.6.1.4.1.597.4.15.9.15 | Counter | read-only | Count of I/O requests with a length equal to or greater than 64 blocks. |
| CTR vmsMscp8_15BlockIOs | 1.3.6.1.4.1.597.4.15.9.12 | Counter | read-only | Count of I/O requests with a length of 8 to 15 blocks. |
| CTR vmsMscpBufferWaits | 1.3.6.1.4.1.597.4.15.9.8 | Counter | read-only | Count of requests that had to wait for MSCP buffer memory. |
| CTR vmsMscpFragments | 1.3.6.1.4.1.597.4.15.9.6 | Counter | read-only | Count of extra fragments issued by the server. |
| CTR vmsMscpReads | 1.3.6.1.4.1.597.4.15.9.4 | Counter | read-only | Count of requests for Read I/O transfers by remote processors. |
| CTR vmsMscpRequests | 1.3.6.1.4.1.597.4.15.9.3 | Counter | read-only | Count of requests for I/O transfers by remote processors. |
| CTR vmsMscpSplits | 1.3.6.1.4.1.597.4.15.9.7 | Counter | read-only | Count of fragmented requests issued by the server. |
| INT vmsMscpUpdateInterval | 1.3.6.1.4.1.597.4.15.9.2 | INTEGER | read-write | How often MSCP Server statistics are to be gathered. A value of 0 disables gathering of mscp statistics. This value is expressed in minutes. |
| TIK vmsMscpUpdateTime | 1.3.6.1.4.1.597.4.15.9.1 | TimeTicks | read-only | Time when MSCP Server statistics were last updated. |
| CTR vmsMscpWrites | 1.3.6.1.4.1.597.4.15.9.5 | Counter | read-only | Count of requests for Write I/O transfers by remote processors. |
| vmsPage | 1.3.6.1.4.1.597.4.15.5 | |||
| CTR vmsPageDemandZeroFault | 1.3.6.1.4.1.597.4.15.5.10 | Counter | read-only | Count of zero-filled pages allocated as a result of faults. |
| CTR vmsPageFault | 1.3.6.1.4.1.597.4.15.5.3 | Counter | read-only | Count of page faults for all working sets. |
| CTR vmsPageFreeListFault | 1.3.6.1.4.1.597.4.15.5.8 | Counter | read-only | Count of pages read from the free list as a result of page faults. |
| CTR vmsPageFreePageCount | 1.3.6.1.4.1.597.4.15.5.14 | Counter | read-only | Number of pages currently on free-page list. |
| CTR vmsPageGlobalValidFault | 1.3.6.1.4.1.597.4.15.5.11 | Counter | read-only | Count of page faults for which the reference page was found to be valid in the system global page tables. |
| CTR vmsPageModifiedPageCount | 1.3.6.1.4.1.597.4.15.5.15 | Counter | read-only | Number of pages currently on modified-page. |
| CTR vmsPageModListFault | 1.3.6.1.4.1.597.4.15.5.9 | Counter | read-only | Count of pages read from the modified list as a result of page faults. |
| CTR vmsPageRead | 1.3.6.1.4.1.597.4.15.5.4 | Counter | read-only | Count of pages read from disk as a result of page faults. |
| CTR vmsPageReadIO | 1.3.6.1.4.1.597.4.15.5.5 | Counter | read-only | Count of read I/Os as a result of operations from disk page faults. |
| CTR vmsPageSystemFault | 1.3.6.1.4.1.597.4.15.5.13 | Counter | read-only | Count of page faults for which the referenced page is in system space. |
| INT vmsPageUpdateInterval | 1.3.6.1.4.1.597.4.15.5.2 | INTEGER | read-write | How often Page statistics are to be gathered. A value of 0 disables gathering of Page statistics. This value is expressed in minutes. |
| TIK vmsPageUpdateTime | 1.3.6.1.4.1.597.4.15.5.1 | TimeTicks | read-only | Time when page statistics were last updated. |
| CTR vmsPageWrite | 1.3.6.1.4.1.597.4.15.5.6 | Counter | read-only | Count of pages written to the page file. |
| CTR vmsPageWriteIO | 1.3.6.1.4.1.597.4.15.5.7 | Counter | read-only | Count of write I/O operations to the page file. |
| CTR vmsPageWrtInProgressFault | 1.3.6.1.4.1.597.4.15.5.12 | Counter | read-only | Count of pages read that were in the process of being written back to disk when faulted. |
| vmsStates | 1.3.6.1.4.1.597.4.15.7 | |||
| CTR vmsStatesCEF | 1.3.6.1.4.1.597.4.15.7.5 | Counter | read-only | Number of processes in Common Event Flag Wait State (CEF). |
| CTR vmsStatesCOLPG | 1.3.6.1.4.1.597.4.15.7.3 | Counter | read-only | Number of processes in Collided Page Wait State (COLPG). |
| CTR vmsStatesCOM | 1.3.6.1.4.1.597.4.15.7.14 | Counter | read-only | Number of processes in Compute State (COM). |
| CTR vmsStatesCOMO | 1.3.6.1.4.1.597.4.15.7.15 | Counter | read-only | Number of Outswapped processes in Compute State (COMO). |
| CTR vmsStatesCUR | 1.3.6.1.4.1.597.4.15.7.16 | Counter | read-only | Number of current processes (CUR). |
| CTR vmsStatesFPG | 1.3.6.1.4.1.597.4.15.7.13 | Counter | read-only | Number of processes in Free Page Wait State (FPG). |
| CTR vmsStatesHIB | 1.3.6.1.4.1.597.4.15.7.9 | Counter | read-only | Number of processes in Hibernate State (HIB). |
| CTR vmsStatesHIBO | 1.3.6.1.4.1.597.4.15.7.10 | Counter | read-only | Number of Outswapped processes in Hibernate State (HIBO). |
| CTR vmsStatesLEF | 1.3.6.1.4.1.597.4.15.7.7 | Counter | read-only | Number of processes in Local Event Flag Wait State (LEF). |
| CTR vmsStatesLEFO | 1.3.6.1.4.1.597.4.15.7.8 | Counter | read-only | Number of Outswapped processes in Local Event Flag Wait State (LEFO). |
| CTR vmsStatesMWAIT | 1.3.6.1.4.1.597.4.15.7.4 | Counter | read-only | Number of processes in Miscellaneous Resource Wait State (MWAIT). |
| CTR vmsStatesPFW | 1.3.6.1.4.1.597.4.15.7.6 | Counter | read-only | Number of processes in Page Fault Wait State (PFW). |
| CTR vmsStatesSUSP | 1.3.6.1.4.1.597.4.15.7.11 | Counter | read-only | Number of processes in Suspended State (SUSP). |
| CTR vmsStatesSUSPO | 1.3.6.1.4.1.597.4.15.7.12 | Counter | read-only | Number of Outswapped processes in Suspended State (SUSPO). |
| INT vmsStatesUpdateInterval | 1.3.6.1.4.1.597.4.15.7.2 | INTEGER | read-write | How often Process State data are to be gathered. A value of 0 disables gathering of Process State statistics. This value is expressed in minutes. |
| TIK vmsStatesUpdateTime | 1.3.6.1.4.1.597.4.15.7.1 | TimeTicks | read-only | Time when Process State data was last updated. |
| vmsSystem | 1.3.6.1.4.1.597.4.15.12 | |||
| CTR vmsSystemBufferedIOs | 1.3.6.1.4.1.597.4.15.12.11 | Counter | read-only | Count of buffered I/O operations. |
| CTR vmsSystemCpuBusy | 1.3.6.1.4.1.597.4.15.12.3 | Counter | read-only | Count of clock ticks (10-millisecond units) spent in all CPU modes since system was booted. |
| CTR vmsSystemDirectIOs | 1.3.6.1.4.1.597.4.15.12.10 | Counter | read-only | Count of direct I/O operations. |
| INT vmsSystemFreePageCount | 1.3.6.1.4.1.597.4.15.12.8 | INTEGER | read-only | Number of pages currently on free-page list. |
| INT vmsSystemModifiedPageCount | 1.3.6.1.4.1.597.4.15.12.9 | INTEGER | read-only | Number of pages currently on modified-page list. |
| INT vmsSystemOtherStates | 1.3.6.1.4.1.597.4.15.12.4 | INTEGER | read-only | Number of processes in states other than LEF, LEFO, HIB, HIBO, COM, COMO, PFW, and MWAIT. |
| CTR vmsSystemPageFaults | 1.3.6.1.4.1.597.4.15.12.6 | Counter | read-only | Count of page faults for all working sets. |
| INT vmsSystemProcessCount | 1.3.6.1.4.1.597.4.15.12.5 | INTEGER | read-only | Number of processes in the system. |
| CTR vmsSystemReadIOs | 1.3.6.1.4.1.597.4.15.12.7 | Counter | read-only | Count of read I/Os resulting from disk page faults. |
| INT vmsSystemUpdateInterval | 1.3.6.1.4.1.597.4.15.12.2 | INTEGER | read-write | How often system statistics are to be gathered. A value of 0 disables gathering of system statistics. This value is expressed in minutes. |
| TIK vmsSystemUpdateTime | 1.3.6.1.4.1.597.4.15.12.1 | TimeTicks | read-only | Time when system statistics were last updated. |
| INT vmsTotalComp | 1.3.6.1.4.1.597.4.15.1.5.7 | INTEGER | read-only | Total clock ticks all CPUs have spent in Compatibility mode since the system was booted. |
| INT vmsTotalExec | 1.3.6.1.4.1.597.4.15.1.5.2 | INTEGER | read-only | Total clock ticks all CPUs have spent in Executive mode since the system was booted. |
| INT vmsTotalIdle | 1.3.6.1.4.1.597.4.15.1.5.8 | INTEGER | read-only | Total clock ticks all CPUs have spent executing the NULL process since the system was booted. |
| INT vmsTotalInter | 1.3.6.1.4.1.597.4.15.1.5.5 | INTEGER | read-only | Total clock ticks (10-millisecond units) all CPUs have spent on the Interrupt stack since the system was booted. |
| INT vmsTotalKernel | 1.3.6.1.4.1.597.4.15.1.5.1 | INTEGER | read-only | Total number of clock ticks all CPUs have spent in kernel mode (excluding interrupt stack time) since the system was booted. |
| vmsTotalModes | 1.3.6.1.4.1.597.4.15.1.5 | |||
| INT vmsTotalMPSync | 1.3.6.1.4.1.597.4.15.1.5.6 | INTEGER | read-only | Total clock ticks all CPUs have spent synchronizing multiple CPUs since the system was booted. |
| INT vmsTotalSuper | 1.3.6.1.4.1.597.4.15.1.5.3 | INTEGER | read-only | Total clock ticks all CPUs have spent in Supervisor mode since the system was booted. |
| INT vmsTotalUser | 1.3.6.1.4.1.597.4.15.1.5.4 | INTEGER | read-only | Total clock ticks all CPUs have spent in User mode (excluding compatibility-mode time) since the system was booted. |
RFC description
Monitors VMS system resources, processes, CPU, disk, and queue information for COMTEK management systems.
Start monitoring Comtek VMS-managed network element with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.