HUAWEI-TS-MIB

All MIBs › HUAWEI-TS-MIB

Category: Domain: System Management, Vendor: Huawei

Description: Huawei TS (Terminal Services) MIB for managing console and VTY terminal session configurations and access controls.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-TS-MIB?

HUAWEI-TS-MIB is a Huawei proprietary MIB for managing Terminal Services on Huawei network devices, covering configuration and monitoring of console and VTY (virtual terminal) sessions used for remote and local device administration. It exposes a terminal-server application table tracking IP address, port, application type, session state, and socket buffer sizing for each terminal service instance, plus a trap group for terminal-service events. This is primarily a software/service-status MIB used to confirm that management access channels (console/VTY) are configured and operating correctly, letting an administrator verify session state and detect abnormal terminal-server behavior such as a stuck or unresponsive TTY session. It relies on standard SNMP/IP conventions and Huawei's private enterprise tree rather than a specific external MIB dependency. It is typically deployed on Huawei routers and switches wherever remote terminal access (Telnet/console redirection) is used for device management. Engineers can download the HUAWEI-TS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-TS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei routers and switches

Monitoring Examples

An administrator would poll tsAppTable, keyed by tsAppID, to check tsAppIPAddress, tsAppPort, and tsAppTtyServerState for each configured terminal application, confirming that a VTY line is in the expected listening or connected state. An unexpectedly stalled tsAppTtyServerState combined with a full tsAppSocketRecvBufSize could indicate a hung terminal session consuming a VTY line and blocking new administrative logins. Monitoring tsTrap notifications would alert operators in real time when a terminal-service session starts, stops, or errors out.

What Can Be Monitored

terminal/VTY session state
configured IP address and port per terminal app
socket receive buffer size
terminal service trap events

Imported Objects

From HUAWEI-3COM-OID-MIB

huawei	OBJECT-IDENTITY
mlsr	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

IpAddress

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
terminalServer	1.3.6.1.4.1.2011.2.33.1
INT tsAppClearStatistic	1.3.6.1.4.1.2011.2.33.1.1.1.15	INTEGER	write-only	Clear APP's statistic information.
tsAppEntry	1.3.6.1.4.1.2011.2.33.1.1.1		not-accessible	Management information about how to set the application.
INT tsAppID	1.3.6.1.4.1.2011.2.33.1.1.1.1	INTEGER	read-only	Set the ID of application.
IP tsAppIPAddress	1.3.6.1.4.1.2011.2.33.1.1.1.2	IpAddress	read-write	Set the IP Address of UNIX that offer terminal server,0 indicate no ip address.
STR tsAppLastRecvTime	1.3.6.1.4.1.2011.2.33.1.1.1.13	DisplayString	read-only	Display the time when the tty received from socket for last time.
STR tsAppLastSendTime	1.3.6.1.4.1.2011.2.33.1.1.1.14	DisplayString	read-only	Display the time when the tty sent from socket for last time.
INT tsAppLocalPort	1.3.6.1.4.1.2011.2.33.1.1.1.7	INTEGER	read-only	Display the port of router,0 indicate no port.
STR tsAppName	1.3.6.1.4.1.2011.2.33.1.1.1.5	DisplayString	read-write	Set the name of application.
INT tsAppPort	1.3.6.1.4.1.2011.2.33.1.1.1.3	INTEGER	read-write	Set the port of application,0 indicate no port.
INT tsAppSocketRecvBufSize	1.3.6.1.4.1.2011.2.33.1.1.1.9	INTEGER	read-only	Display the size of recvbuf for socket.
INT tsAppSocketSendBufSize	1.3.6.1.4.1.2011.2.33.1.1.1.10	INTEGER	read-only	Display the size of sendbuf for socket.
INT tsAppSockRecvByte	1.3.6.1.4.1.2011.2.33.1.1.1.11	INTEGER	read-only	Display the byte number that has already received from socket.
INT tsAppSockSendByte	1.3.6.1.4.1.2011.2.33.1.1.1.12	INTEGER	read-only	Display the byte number that has already sent from socket.
IP tsAppSourceIP	1.3.6.1.4.1.2011.2.33.1.1.1.6	IpAddress	read-write	Set the tcp/ip that will be bound,0 indicate no source ip.
ENT tsAppStatus	1.3.6.1.4.1.2011.2.33.1.1.1.17	EntryStatus	read-write	set the state on terminal server.If you will create a row,the values of tsAppIPAddress,tsAppPort,tsAppType,tsAppName must be not null. You can delete a exist row and you can modify a exist row.If you modify a row under the status of row,you change the status from valid to undercreation.when you have changed them,you change the status to valid
NTF tsAppStatusTrap	1.3.6.1.4.1.2011.2.33.1.10.1			send a value when the state of application change.
tsAppTable	1.3.6.1.4.1.2011.2.33.1.1		not-accessible	A table containing how to set the application.
INT tsAppTtyServerState	1.3.6.1.4.1.2011.2.33.1.1.1.8	INTEGER	read-only	Display the connection-state on the UNIX.
INT tsAppType	1.3.6.1.4.1.2011.2.33.1.1.1.4	INTEGER	read-write	Set the type of application.
INT tsAppUnixIndex	1.3.6.1.4.1.2011.2.33.1.1.1.16	INTEGER	read-only	Display the channel number.
INT tsAsyModeTtyAppID	1.3.6.1.4.1.2011.2.33.1.2.1.4	INTEGER	read-write	Set the application ID,-1 indicate no app.
INT tsAsyModeTtyDisconnect	1.3.6.1.4.1.2011.2.33.1.2.1.5	INTEGER	write-only	Disconnect current VTY's tcp.
tsAsyModeTtyEntry	1.3.6.1.4.1.2011.2.33.1.2.1		not-accessible	Management information about how to set the tty mode on interface.
INT tsAsyModeTtyFlowCtrlState	1.3.6.1.4.1.2011.2.33.1.2.1.7	INTEGER	read-only	Display whether set flow control mode.
INT tsAsyModeTtyID	1.3.6.1.4.1.2011.2.33.1.2.1.1	INTEGER	read-only	Set the tty ID.
INT tsAsyModeTtyIFIndex	1.3.6.1.4.1.2011.2.33.1.2.1.3	INTEGER	read-write	Select the current interface.
ENT tsAsyModeTtyStatus	1.3.6.1.4.1.2011.2.33.1.2.1.8	EntryStatus	read-write	Set the tty state in the interface.It can create a new row and delete a row.But when creat a new row,the application must be set.If you modify a row under the status of row, you change the status from valid to undercreation.when you have changed them,you change the status to valid.And if you will create a row,the values of tsAsyModeTtyIFIndex,tsAsyModeTtyAppID must be not null.
tsAsyModeTtyTable	1.3.6.1.4.1.2011.2.33.1.2		not-accessible	A table containing how to set the tty mode on interface.
INT tsAsyModeTtyVtyID	1.3.6.1.4.1.2011.2.33.1.2.1.2	INTEGER	read-only	Set the vty ID.
INT tsAsyModeTtyVtyState	1.3.6.1.4.1.2011.2.33.1.2.1.6	INTEGER	read-only	Display the state of the unix.
NTF tsClearSuccessTrap	1.3.6.1.4.1.2011.2.33.1.10.4			Clear statistic successfully.
INT tsClearTtyAll	1.3.6.1.4.1.2011.2.33.1.7	INTEGER	write-only	Clear the information of the app and tty.
INT tsDebugTtyAll	1.3.6.1.4.1.2011.2.33.1.3.1.36	INTEGER	read-write	Open/close specify tty's all debug information.
INT tsDebugTtyBrief	1.3.6.1.4.1.2011.2.33.1.3.1.37	INTEGER	read-write	Open/close tty brief debug information.
INT tsDebugTtyError	1.3.6.1.4.1.2011.2.33.1.9.1	INTEGER	read-write	tty exception error information.
tsDebugTtyGroup	1.3.6.1.4.1.2011.2.33.1.9
INT tsDebugTtyManage	1.3.6.1.4.1.2011.2.33.1.9.2	INTEGER	read-write	manage channel debug information.
INT tsDebugTtySock	1.3.6.1.4.1.2011.2.33.1.3.1.38	INTEGER	read-write	socket data debug information.
INT tsDebugTtyTimeStamp	1.3.6.1.4.1.2011.2.33.1.3.1.39	INTEGER	read-write	dataflow timestamp debug information.
INT tsDebugTtyTty	1.3.6.1.4.1.2011.2.33.1.3.1.40	INTEGER	read-write	Open/close the debug tty switch of the tty.
NTF tsDisconnectSuccessTrap	1.3.6.1.4.1.2011.2.33.1.10.5			Disconnect vty successfully.
INT tsEnable	1.3.6.1.4.1.2011.2.33.1.5	INTEGER	read-write	Decide whether to have the function of terminal server.
INT tsEnableTrap	1.3.6.1.4.1.2011.2.33.1.6	INTEGER	read-write	Decide whether to send terminal server trap.
NTF tsExceptionTrap	1.3.6.1.4.1.2011.2.33.1.10.3			send a Exception when the terminal server has exception.
INT tsLoginTty	1.3.6.1.4.1.2011.2.33.1.8	INTEGER	read-write	Enable HWTTY EXEC Authentication.
tsTrap	1.3.6.1.4.1.2011.2.33.1.10
INT tsTtyAutoLink	1.3.6.1.4.1.2011.2.33.1.3.1.3	INTEGER	read-write	Set auto link interval(second).
INT tsTtyBufferRate	1.3.6.1.4.1.2011.2.33.1.3.1.24	INTEGER	read-only	Display the rate of flow control(%).
INT tsTtyBufferSize	1.3.6.1.4.1.2011.2.33.1.3.1.2	INTEGER	read-write	Set the buffer size(byte).
INT tsTtyClearStatistic	1.3.6.1.4.1.2011.2.33.1.3.1.35	INTEGER	write-only	Clear TTY's statistic information.
INT tsTtyCloseLink	1.3.6.1.4.1.2011.2.33.1.3.1.4	INTEGER	read-write	Set auto close link interval(second).
INT tsTtyConnPrint	1.3.6.1.4.1.2011.2.33.1.3.1.5	INTEGER	read-write	Print connection information.
INT tsTtyCurrentAppID	1.3.6.1.4.1.2011.2.33.1.3.1.32	INTEGER	read-only	Display the ID of the current vty.
INT tsTtyCurrentAppRecv	1.3.6.1.4.1.2011.2.33.1.3.1.33	INTEGER	read-only	Display the byte number of the app that received.
INT tsTtyCurrentAppSend	1.3.6.1.4.1.2011.2.33.1.3.1.34	INTEGER	read-only	Display the byte number of the app that sent.
INT tsTtyCurrentVtyID	1.3.6.1.4.1.2011.2.33.1.3.1.29	INTEGER	read-only	Display the ID of the current vty.
INT tsTtyCurrentVtyRecv	1.3.6.1.4.1.2011.2.33.1.3.1.30	INTEGER	read-only	Display the byte number of the vty that received.
INT tsTtyCurrentVtySend	1.3.6.1.4.1.2011.2.33.1.3.1.31	INTEGER	read-only	Display the byte number of the vty that sent.
INT tsTtyDelay	1.3.6.1.4.1.2011.2.33.1.3.1.6	INTEGER	read-write	Print connection information(second).
tsTtyEntry	1.3.6.1.4.1.2011.2.33.1.3.1		not-accessible	Management information about how to set something about the tty.
INT tsTtyID	1.3.6.1.4.1.2011.2.33.1.3.1.1	INTEGER	read-only	Set the tty ID.
STR tsTtyLastRecvTime	1.3.6.1.4.1.2011.2.33.1.3.1.27	DisplayString	read-only	Display the last time of the tty that received.
STR tsTtyLastSendTime	1.3.6.1.4.1.2011.2.33.1.3.1.28	DisplayString	read-only	Display the last time of the tty that sent.
INT tsTtyLogoPrint	1.3.6.1.4.1.2011.2.33.1.3.1.7	INTEGER	read-write	Display the logo of terminal server.
tsTtyManageEntry	1.3.6.1.4.1.2011.2.33.1.4.1		not-accessible	Management information about how to bind tcp/ip.
INT tsTtyManageItemNum	1.3.6.1.4.1.2011.2.33.1.4.1.4	INTEGER	read-only	Display the number of unix item.
IP tsTtyManageLocalIP	1.3.6.1.4.1.2011.2.33.1.4.1.3	IpAddress	read-only	Display the Local IP address.
tsTtyManageTable	1.3.6.1.4.1.2011.2.33.1.4		not-accessible	A table containing the information about the channel.
INT tsTtyManageUnixIndex	1.3.6.1.4.1.2011.2.33.1.4.1.1	INTEGER	read-only	An index for unix.
INT tsTtyManageUnixSockid	1.3.6.1.4.1.2011.2.33.1.4.1.2	INTEGER	read-only	Display the sock ID that the channel is using.
INT tsTtyMenuKey1	1.3.6.1.4.1.2011.2.33.1.3.1.8	INTEGER	read-write	Set the hotkey to start-up terminal server.
INT tsTtyMenuKey2	1.3.6.1.4.1.2011.2.33.1.3.1.9	INTEGER	read-write	Set the hotkey to start-up terminal server.
INT tsTtyMenuKey3	1.3.6.1.4.1.2011.2.33.1.3.1.10	INTEGER	read-write	Set the hotkey to start-up terminal server.
INT tsTtyReadBlock	1.3.6.1.4.1.2011.2.33.1.3.1.11	INTEGER	read-write	Set read TTY data block.
INT tsTtyRecvBytes	1.3.6.1.4.1.2011.2.33.1.3.1.25	INTEGER	read-only	Display the byte number of the tty that has received.
INT tsTtyRedrawkey1	1.3.6.1.4.1.2011.2.33.1.3.1.12	INTEGER	read-write	Set redraw screen hot-key.
INT tsTtyRedrawkey2	1.3.6.1.4.1.2011.2.33.1.3.1.13	INTEGER	read-write	Set redraw screen hot-key.
INT tsTtyRedrawkey3	1.3.6.1.4.1.2011.2.33.1.3.1.14	INTEGER	read-write	Set redraw screen hot-key.
INT tsTtyResetKey1	1.3.6.1.4.1.2011.2.33.1.3.1.15	INTEGER	read-write	Set reset hot-key.
INT tsTtyResetKey2	1.3.6.1.4.1.2011.2.33.1.3.1.16	INTEGER	read-write	Set reset hot-key.
INT tsTtyResetKey3	1.3.6.1.4.1.2011.2.33.1.3.1.17	INTEGER	read-write	Set reset hot-key.
INT tsTtySendBytes	1.3.6.1.4.1.2011.2.33.1.3.1.26	INTEGER	read-only	Display the byte number of the tty that has sent.
NTF tsTtyStatusTrap	1.3.6.1.4.1.2011.2.33.1.10.2			send a value when the state of tty change.
tsTtyTable	1.3.6.1.4.1.2011.2.33.1.3		not-accessible	A table containing how to set something about the tty.If the tty no set,you can't set the values
INT tsTtyTcpNoDelay	1.3.6.1.4.1.2011.2.33.1.3.1.18	INTEGER	read-write	Set tcp NODELAY option.
INT tsTtyTcpRecvBufferSize	1.3.6.1.4.1.2011.2.33.1.3.1.19	INTEGER	read-write	Set tcp recv buffer size(byte).
INT tsTtyTcpSendBufferSize	1.3.6.1.4.1.2011.2.33.1.3.1.20	INTEGER	read-write	Set tcp send buffer size(byte).
INT tsTtyTestKey1	1.3.6.1.4.1.2011.2.33.1.3.1.21	INTEGER	read-write	Set test hot-key.
INT tsTtyTestKey2	1.3.6.1.4.1.2011.2.33.1.3.1.22	INTEGER	read-write	Set test hot-key.
INT tsTtyTestKey3	1.3.6.1.4.1.2011.2.33.1.3.1.23	INTEGER	read-write	Set test hot-key.

RFC description

Manages Terminal Server functionality for serial router connection and remote device access.

Start monitoring Huawei routers and switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-TS-MIB

What Is HUAWEI-TS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description