CIENA-CES-CFM-MIB

All MIBs › CIENA-CES-CFM-MIB

Organization: Ciena Corp.

Last Updated: 2017-06-07

Category: Vendor: Ciena

Description: Manages IEEE 802.1ag Connectivity Fault Management (CFM) OAM on Ciena CES switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CIENA-CES-CFM-MIB?

CIENA-CES-CFM-MIB is a Ciena enterprise MIB that instruments IEEE 802.1ag Connectivity Fault Management (CFM) Operations, Administration and Maintenance (OAM) on Ciena Carrier Ethernet Switch (CES) platforms. It exposes fault, configuration, and statistical data related to Continuity Check Messages (CCM), loopback/linktrace exchanges, and service-level fault reporting between Maintenance End Points (MEPs). Its primary monitoring value is software/protocol health rather than physical hardware: operators use it to track CCM error counters, dropped or malformed CCM frames, frame-loss measurements, and active service faults, which together reveal whether Ethernet OAM sessions are healthy or a link/service has silently failed. It builds on the IEEE 802.1ag CFM standard and is typically used alongside other Ciena CES MIBs (RAPS, LAG, OAM) for end-to-end Carrier Ethernet fault management. It is deployed in service-provider and enterprise Carrier Ethernet networks where CES switches provide Layer 2 transport and rapid fault detection is required for SLA compliance. Engineers can download the CIENA-CES-CFM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CIENA-CES-CFM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ciena Carrier Ethernet Switch (CES)

Monitoring Examples

An operator would poll cienaCesCfmGlobalCCMStatsRxTotalErrorCCM and cienaCesCfmGlobalCCMStatsRxTotalMalformedCCM to detect CFM protocol problems, and cienaCesCfmGlobalCCMStatsRxDropCCMBlockedbyOppMep or cienaCesCfmGlobalCCMStatsRxDropCCMServiceDisabled to see why CCMs are being discarded. A rising cienaCesCfmFrameLossMsgFrameLossFar value combined with a populated cienaCesCfmServiceFaultDesc/cienaCesCfmServiceFaultMep pair indicates a specific MEP is experiencing frame loss or a service fault that should trigger a trap-driven alert. These counters let an admin distinguish a genuine link failure from a misconfigured or leaking CFM domain.

What Can Be Monitored

CCM error/malformed frame counts
dropped CCM reasons (admin disable, blocked by opposite MEP, leakage)
far-end frame loss measurements
active service fault descriptions
MEP fault status
CFM protocol health

Imported Objects

From CIENA-GLOBAL-MIB

cienaGlobalMacAddress	OBJECT-TYPE
cienaGlobalSeverity	OBJECT-TYPE

From CIENA-SMI

cienaCesConfig	OBJECT-IDENTITY
cienaCesNotifications	OBJECT-IDENTITY
cienaCesStatistics	OBJECT-IDENTITY

From CIENA-TC

CienaGlobalState
CienaMacAddress
CienaStatsClear

From SNMPv2-SMI

Counter32
Counter64
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF cienaCesCfmAverageDelayFaultTrapClear	1.3.6.1.4.1.1271.2.2.5.0.4			A notification is sent whenever average delay comes back to normal. Setting the cienaCesCfmDelayFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgAverageDelayThreshold, and cienaCesCfmDelayMsgAverageDelay.
NTF cienaCesCfmAverageDelayFaultTrapSet	1.3.6.1.4.1.1271.2.2.5.0.3			A notification is sent whenever average delay goes above delay-threshold during a delay measurement test. Setting the cienaCesCfmDelayFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgAverageDelayThreshold, and cienaCesCfmDelayMsgAverageDelay.
NTF cienaCesCfmAverageDelayVariationTrapClear	1.3.6.1.4.1.1271.2.2.5.0.20			A notification is sent whenever Average Delay Variation comes back below the threshold level during a Delay Variation measurement test. Setting the cienaCesCfmDelayVariationFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgAverageDelayVariationThreshold, and cienaCesCfmDelayMsgAverageDelayVariation.
NTF cienaCesCfmAverageDelayVariationTrapSet	1.3.6.1.4.1.1271.2.2.5.0.19			A notification is sent whenever Average Delay Variation goes above Average Delay Variation threshold during a Delay Variation measurement test. Setting the cienaCesCfmDelayVariationFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgAverageDelayVariationThreshold, and cienaCesCfmDelayMsgAverageDelayVariation.
NTF cienaCesCfmAverageJitterTrapClear	1.3.6.1.4.1.1271.2.2.5.0.8			A notification is sent whenever average jitter comes back to normal. Setting the cienaCesCfmJitterFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgAverageJitterThreshold, and cienaCesCfmDelayMsgAverageJitter.
NTF cienaCesCfmAverageJitterTrapSet	1.3.6.1.4.1.1271.2.2.5.0.7			A notification is sent whenever average jitter goes above average jitter-threshold during a jitter measurement test. Setting the cienaCesCfmJitterFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgAverageJitterThreshold, and cienaCesCfmDelayMsgAverageJitter.
cienaCesCfmDelay	1.3.6.1.4.1.1271.2.1.4.1.5
U32 cienaCesCfmDelayMsgAverageDelay	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.8	Unsigned32	read-only	This object indicates the average delay.
INT cienaCesCfmDelayMsgAverageDelayThreshold	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.4	INTEGER	read-only	This object indicates the threshold for the average delay in microseconds.
U32 cienaCesCfmDelayMsgAverageDelayVariation	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.14	Unsigned32	read-only	This object indicates the Average Inter Frame Delay Variation.
I32 cienaCesCfmDelayMsgAverageDelayVariationThreshold	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.17	Integer32	read-only	This object indicates the threshold value for average Inter Frame Delay Variation. A value of -1 disables the generation of faults. A value of 0 or greater is compared to the Average Delay Variation measured in the test and a fault is generated if the threshold is exceeded.
U32 cienaCesCfmDelayMsgAverageJitter	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.9	Unsigned32	read-only	This object indicates the average jitter.
INT cienaCesCfmDelayMsgAverageJitterThreshold	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.5	INTEGER	read-only	This object indicates the threshold value for average jitter in microseconds.
U32 cienaCesCfmDelayMsgCount	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.20	Unsigned32	read-only	This object specifies the number of DMM messages that will be transmitted for one Iteration.
U32 cienaCesCfmDelayMsgDuration	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.23	Unsigned32	read-only	This object specifies the duration of time the test took in seconds to complete one iteration.
cienaCesCfmDelayMsgEntry	1.3.6.1.4.1.1271.2.1.4.1.5.1.1		not-accessible	An entry (conceptual row) in the cienaCesCfmDelayMsgTable.
U32 cienaCesCfmDelayMsgIterations	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.21	Unsigned32	read-only	This object specifies the number of iterations the test has to be conducted. A zero value means that test is continuous, and iterations are infinite.
INT cienaCesCfmDelayMsgLocalMEPId	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.1	INTEGER	not-accessible	This object is used to specify the local MEP ID.
U32 cienaCesCfmDelayMsgMaximumDelay	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.10	Unsigned32	read-only	This object indicates the maximum delay.
INT cienaCesCfmDelayMsgMaximumDelayThreshold	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.6	INTEGER	read-only	This object indicates the threshold for the maximum delay.
U32 cienaCesCfmDelayMsgMaximumDelayVariation	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.15	Unsigned32	read-only	This object indicates the Maximum Inter Frame Delay Variation.
I32 cienaCesCfmDelayMsgMaximumDelayVariationThreshold	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.18	Integer32	read-only	This object indicates the threshold value for maximum Inter Frame Delay Variation. A value of -1 disables the generation of faults. A value of 0 or greater is compared to the Maximum Delay Variation measured in the test and a fault is generated if the threshold is exceeded.
U32 cienaCesCfmDelayMsgMaximumJitter	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.11	Unsigned32	read-only	This object indicates the maximum jitter.
INT cienaCesCfmDelayMsgMaximumJitterThreshold	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.7	INTEGER	read-only	This object indicates the threshold value for maximum jitter.
U32 cienaCesCfmDelayMsgMinimumDelay	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.12	Unsigned32	read-only	This object indicates the minimum delay.
U32 cienaCesCfmDelayMsgMinimumDelayVariation	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.16	Unsigned32	read-only	This object indicates the Minimum Inter Frame Delay Variation.
U32 cienaCesCfmDelayMsgMinimumJitter	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.13	Unsigned32	read-only	This object indicates the minimum jitter.
U32 cienaCesCfmDelayMsgPriority	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.19	Unsigned32	read-only	This object specifies the priority that will be encoded in the DMM message.
U32 cienaCesCfmDelayMsgRepeatDelay	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.22	Unsigned32	read-only	This object specifies the delay in minutes between consecutive test iterations.
STR cienaCesCfmDelayMsgServiceName	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.3	DisplayString	read-only	This object indicates the service associated with the delay message.
cienaCesCfmDelayMsgTable	1.3.6.1.4.1.1271.2.1.4.1.5.1		not-accessible	The (conceptual) table listing the configuration parameters for the DelayMeasurementMsg.
U32 cienaCesCfmDelayMsgTargetMEPID	1.3.6.1.4.1.1271.2.1.4.1.5.1.1.2	Unsigned32	read-only	This object is used to specify the MEP ID.
ETH cienaCesCfmEtherType	1.3.6.1.4.1.1271.2.1.4.1.11.2	EthType	read-only	This object indicates the Ethertype value used for CFM frames.
NTF cienaCesCfmFaultTrapClear	1.3.6.1.4.1.1271.2.2.5.0.2			A notification is sent whenever the fault is resolved and cleared. Setting the cienaCesCfmFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmServiceName, cienaCesCfmServiceType, cienaCesCfmServiceValue, cienaCesCfmServiceAdminState, cienaCesCfmServiceOperState, cienaCesCfmServiceMdLevel, cienaCesCfmServiceVsPbtName, cienaCesCfmServiceFaultTime, cienaCesCfmServiceFaultType, cienaCesCfmServiceFaultDesc, and cienaCesCfmServiceFaultMep.
NTF cienaCesCfmFaultTrapSet	1.3.6.1.4.1.1271.2.2.5.0.1			A notification is sent whenever the fault is detected. Setting the cienaCesCfmFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmServiceName, cienaCesCfmServiceType, cienaCesCfmServiceValue, cienaCesCfmServiceAdminState, cienaCesCfmServiceOperState, cienaCesCfmServiceMdLevel, cienaCesCfmServiceFaultTime, cienaCesCfmServiceFaultType, cienaCesCfmServiceFaultDesc, cienaCesCfmServiceFaultMep, and cienaCesCfmServiceVsPbtName.
cienaCesCfmFrameBudgetGlobal	1.3.6.1.4.1.1271.2.1.4.1.10
cienaCesCfmFrameBudgetGlobalEntry	1.3.6.1.4.1.1271.2.1.4.1.10.2.1		not-accessible	An entry (conceptual row) in the cienaCesCfmGlobalFrameBudgetTable.
C32 cienaCesCfmFrameBudgetGlobalSlot	1.3.6.1.4.1.1271.2.1.4.1.10.2.1.1	Counter32	read-only	This object indicates the global CFM frame budget for the slot.
cienaCesCfmFrameBudgetGlobalTable	1.3.6.1.4.1.1271.2.1.4.1.10.2		not-accessible	The (conceptual) table listing the configuration parameters for the CFM global frame budget table.
cienaCesCfmFrameLoss	1.3.6.1.4.1.1271.2.1.4.1.6
NTF cienaCesCfmFrameLossFarTrapClear	1.3.6.1.4.1.1271.2.2.5.0.14			A notification is sent whenever frame-loss-far returns to normal during a frame loss measurement test. Setting the cienaCesCfmFrameLossFarFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmFrameLossMsgServiceName, cienaCesCfmFrameLossMsgLocalMEPId, cienaCesCfmFrameLossMsgFarLossThreshold, and cienaCesCfmFrameLossMsgFrameLossFar.
NTF cienaCesCfmFrameLossFarTrapSet	1.3.6.1.4.1.1271.2.2.5.0.13			A notification is sent whenever frame-loss-far goes above frame-loss-far threshold during a frame loss measurement test. Setting the cienaCesCfmFrameLossFarFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmFrameLossMsgServiceName, cienaCesCfmFrameLossMsgLocalMEPId, cienaCesCfmFrameLossMsgFarLossThreshold, and cienaCesCfmFrameLossMsgFrameLossFar.
cienaCesCfmFrameLossMsgEntry	1.3.6.1.4.1.1271.2.1.4.1.6.1.1		not-accessible	An entry (conceptual row) in the cienaCesCfmFrameLossMsgTable.
INT cienaCesCfmFrameLossMsgFarLossThreshold	1.3.6.1.4.1.1271.2.1.4.1.6.1.1.4	INTEGER	read-only	This object indicates the threshold value for the far-end frame loss.
U32 cienaCesCfmFrameLossMsgFrameLossFar	1.3.6.1.4.1.1271.2.1.4.1.6.1.1.7	Unsigned32	read-only	This object indicates the far-end frame loss. For a MEP, far-end frame loss refers to frame loss associated with the egress data frames.
U32 cienaCesCfmFrameLossMsgFrameLossNear	1.3.6.1.4.1.1271.2.1.4.1.6.1.1.6	Unsigned32	read-only	This object indicates the near-end frame loss. For a MEP, near-end frame loss refers to frame loss associated with the ingress data frames.
INT cienaCesCfmFrameLossMsgLocalMEPId	1.3.6.1.4.1.1271.2.1.4.1.6.1.1.1	INTEGER	not-accessible	This object is used to specify the local MEP ID at the source.
INT cienaCesCfmFrameLossMsgNearLossThreshold	1.3.6.1.4.1.1271.2.1.4.1.6.1.1.3	INTEGER	read-only	Indicates the threshold value for the near-end frame loss.
STR cienaCesCfmFrameLossMsgServiceName	1.3.6.1.4.1.1271.2.1.4.1.6.1.1.5	DisplayString	read-only	This object indicates the service associated with the frame loss measurement message (LMM).
cienaCesCfmFrameLossMsgTable	1.3.6.1.4.1.1271.2.1.4.1.6.1		not-accessible	The (conceptual) table listing the configuration parameters for the FrameLossMeasurementMsg.
U32 cienaCesCfmFrameLossMsgTargetMEPID	1.3.6.1.4.1.1271.2.1.4.1.6.1.1.2	Unsigned32	read-only	This object is used to specify the MEP ID.
NTF cienaCesCfmFrameLossNearTrapClear	1.3.6.1.4.1.1271.2.2.5.0.12			A notification is sent whenever frame-loss-near returns to normal during a frame loss measurement test. Setting the cienaCesCfmFrameLossNearFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaCesCfmFrameLossMsgServiceName, cienaCesCfmFrameLossMsgLocalMEPId, cienaCesCfmFrameLossMsgNearLossThreshold, and cienaCesCfmFrameLossMsgFrameLossNear.
NTF cienaCesCfmFrameLossNearTrapSet	1.3.6.1.4.1.1271.2.2.5.0.11			A notification is sent whenever frame-loss-near goes above frame-loss-near threshold during a frame loss measurement test. Setting the cienaCesCfmFrameLossNearFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmFrameLossMsgServiceName,cienaCesCfmFrameLossMsgLocalMEPId, cienaCesCfmFrameLossMsgNearLossThreshold, and cienaCesCfmFrameLossMsgFrameLossNear.
cienaCesCfmGlobal	1.3.6.1.4.1.1271.2.1.4.1.11
cienaCesCfmGlobalCCMStats	1.3.6.1.4.1.1271.2.3.4.1.1.4
C64 cienaCesCfmGlobalCCMStatsRxDropAdminDisable	1.3.6.1.4.1.1271.2.3.4.1.1.4.15	Counter64	read-only	The number of CCM frames dropped because of a disabled administrative state.
C64 cienaCesCfmGlobalCCMStatsRxDropCCMBlockedbyOppMep	1.3.6.1.4.1.1271.2.3.4.1.1.4.17	Counter64	read-only	The number of invalid CCM frames dropped because CCM was blocked by opposite MEP.
C64 cienaCesCfmGlobalCCMStatsRxDropCCMLeakage	1.3.6.1.4.1.1271.2.3.4.1.1.4.18	Counter64	read-only	The number of CCM frames dropped because of CCM leakage.
C64 cienaCesCfmGlobalCCMStatsRxDropCCMServiceDisabled	1.3.6.1.4.1.1271.2.3.4.1.1.4.20	Counter64	read-only	The number of CCM frames received and dropped because the service was disabled.
C64 cienaCesCfmGlobalCCMStatsRxDropCCMTooLong	1.3.6.1.4.1.1271.2.3.4.1.1.4.19	Counter64	read-only	The number of invalid CCM received frames dropped because CCM was too long.
C64 cienaCesCfmGlobalCCMStatsRxDropSTPstatenotForwarding	1.3.6.1.4.1.1271.2.3.4.1.1.4.16	Counter64	read-only	The number of CCM frames dropped because STP state was not forwarding.
C64 cienaCesCfmGlobalCCMStatsRxInvalidCCMInterval	1.3.6.1.4.1.1271.2.3.4.1.1.4.7	Counter64	read-only	The number of MAID Xcon CFM frames received.
C64 cienaCesCfmGlobalCCMStatsRxInvalidFirstTlvOffset	1.3.6.1.4.1.1271.2.3.4.1.1.4.8	Counter64	read-only	The number of frames dropped when the mode is administratively disabled.
C64 cienaCesCfmGlobalCCMStatsRxInvalidInterfaceStatusTlv	1.3.6.1.4.1.1271.2.3.4.1.1.4.11	Counter64	read-only	The number of invalid CCM frames received with invalid interface status TLV.
C64 cienaCesCfmGlobalCCMStatsRxInvalidLogicalInterface	1.3.6.1.4.1.1271.2.3.4.1.1.4.12	Counter64	read-only	The number of invalid CCM frames received with invalid logical interface status TLV.
C64 cienaCesCfmGlobalCCMStatsRxInvalidMAID	1.3.6.1.4.1.1271.2.3.4.1.1.4.6	Counter64	read-only	The number of MD level CFM frames received.
C64 cienaCesCfmGlobalCCMStatsRxInvalidPBTEncapTunnel	1.3.6.1.4.1.1271.2.3.4.1.1.4.14	Counter64	read-only	The number of invalid CCM frames received on invalid PBB-TE encapsulation tunnel.
C64 cienaCesCfmGlobalCCMStatsRxInvalidPortStatusTlv	1.3.6.1.4.1.1271.2.3.4.1.1.4.9	Counter64	read-only	The number of CCM frames received with invalid port status TLV.
C64 cienaCesCfmGlobalCCMStatsRxInvalidServiceInstance	1.3.6.1.4.1.1271.2.3.4.1.1.4.13	Counter64	read-only	The number of invalid CCM frames received on invalid service instance.
C64 cienaCesCfmGlobalCCMStatsRxTotalCCM	1.3.6.1.4.1.1271.2.3.4.1.1.4.3	Counter64	read-only	The number of valid frames received.
C64 cienaCesCfmGlobalCCMStatsRxTotalCCMSequenceErrors	1.3.6.1.4.1.1271.2.3.4.1.1.4.5	Counter64	read-only	The number of errored CCM frames received in sequence.
C64 cienaCesCfmGlobalCCMStatsRxTotalErrorCCM	1.3.6.1.4.1.1271.2.3.4.1.1.4.21	Counter64	read-only	The number of CCM frames received with Error CCM fault.
C64 cienaCesCfmGlobalCCMStatsRxTotalMalformedCCM	1.3.6.1.4.1.1271.2.3.4.1.1.4.22	Counter64	read-only	The number of malformed CCM frames received.
C64 cienaCesCfmGlobalCCMStatsRxTotalMEPCCM	1.3.6.1.4.1.1271.2.3.4.1.1.4.23	Counter64	read-only	The number of CCM frames received by CFM MEPs.
C64 cienaCesCfmGlobalCCMStatsRxTotalMIPCCM	1.3.6.1.4.1.1271.2.3.4.1.1.4.24	Counter64	read-only	The number of CCM frames received by CFM MIPs.
C64 cienaCesCfmGlobalCCMStatsTxTotalCCM	1.3.6.1.4.1.1271.2.3.4.1.1.4.1	Counter64	read-only	The total number of CCM frames sent.
C64 cienaCesCfmGlobalCCMStatsTxTotalCCMFlooded	1.3.6.1.4.1.1271.2.3.4.1.1.4.2	Counter64	read-only	The total number of flooded CCM frames sent.
C32 cienaCesCfmGlobalControlModuleFrameBudget	1.3.6.1.4.1.1271.2.1.4.1.10.1	Counter32	read-only	Control Module Frame Budget.
cienaCesCfmGlobalDelayMeasurementStats	1.3.6.1.4.1.1271.2.3.4.1.1.7
C64 cienaCesCfmGlobalDelayMeasurementStatsRxTotalDMM	1.3.6.1.4.1.1271.2.3.4.1.1.7.3	Counter64	read-only	The number of DMM frames received.
C64 cienaCesCfmGlobalDelayMeasurementStatsRxTotalDMR	1.3.6.1.4.1.1271.2.3.4.1.1.7.4	Counter64	read-only	The number of DMR frames received.
C64 cienaCesCfmGlobalDelayMeasurementStatsTxTotalDMM	1.3.6.1.4.1.1271.2.3.4.1.1.7.1	Counter64	read-only	The number of DMM frames transmitted.
C64 cienaCesCfmGlobalDelayMeasurementStatsTxTotalDMR	1.3.6.1.4.1.1271.2.3.4.1.1.7.2	Counter64	read-only	The number of DMR frames transmitted.
cienaCesCfmGlobalFrameBudget	1.3.6.1.4.1.1271.2.3.4.1.1.2
C32 cienaCesCfmGlobalFrameBudgetControlModule	1.3.6.1.4.1.1271.2.3.4.1.1.2.1	Counter32	read-only	Control Module Frame Budget is deprecated because it is moved from statistics to node definitions.
C32 cienaCesCfmGlobalFrameBudgetSlot1	1.3.6.1.4.1.1271.2.3.4.1.1.2.2	Counter32	read-only	Slot1 Frame Budget.
C32 cienaCesCfmGlobalFrameBudgetSlot10	1.3.6.1.4.1.1271.2.3.4.1.1.2.11	Counter32	read-only	Slot10 Frame Budget.
C32 cienaCesCfmGlobalFrameBudgetSlot2	1.3.6.1.4.1.1271.2.3.4.1.1.2.3	Counter32	read-only	Slot2 Frame Budget.
C32 cienaCesCfmGlobalFrameBudgetSlot3	1.3.6.1.4.1.1271.2.3.4.1.1.2.4	Counter32	read-only	Slot3 Frame Budget.
C32 cienaCesCfmGlobalFrameBudgetSlot4	1.3.6.1.4.1.1271.2.3.4.1.1.2.5	Counter32	read-only	Slot4 Frame Budget.
C32 cienaCesCfmGlobalFrameBudgetSlot5	1.3.6.1.4.1.1271.2.3.4.1.1.2.6	Counter32	read-only	Slot5 Frame Budget.
C32 cienaCesCfmGlobalFrameBudgetSlot6	1.3.6.1.4.1.1271.2.3.4.1.1.2.7	Counter32	read-only	Slot6 Frame Budget.
C32 cienaCesCfmGlobalFrameBudgetSlot7	1.3.6.1.4.1.1271.2.3.4.1.1.2.8	Counter32	read-only	Slot7 Frame Budget.
C32 cienaCesCfmGlobalFrameBudgetSlot8	1.3.6.1.4.1.1271.2.3.4.1.1.2.9	Counter32	read-only	Slot8 Frame Budget.
C32 cienaCesCfmGlobalFrameBudgetSlot9	1.3.6.1.4.1.1271.2.3.4.1.1.2.10	Counter32	read-only	Slot9 Frame Budget.
cienaCesCfmGlobalLinkTraceStats	1.3.6.1.4.1.1271.2.3.4.1.1.6
C64 cienaCesCfmGlobalLinkTraceStatsRxLTMInvalidFirstTLVOffset	1.3.6.1.4.1.1271.2.3.4.1.1.6.6	Counter64	read-only	The number of linktrace messages received with an invalid first TLV offset.
C64 cienaCesCfmGlobalLinkTraceStatsRxLTRInvalidFirstTLVOffset	1.3.6.1.4.1.1271.2.3.4.1.1.6.7	Counter64	read-only	The number of linktrace replies received with an invalid first TLV offset.
C64 cienaCesCfmGlobalLinkTraceStatsRxLTRInvalidRelayAction	1.3.6.1.4.1.1271.2.3.4.1.1.6.8	Counter64	read-only	The number of linktrace replies received with an invalid relay action.
C64 cienaCesCfmGlobalLinkTraceStatsRxTotalLTM	1.3.6.1.4.1.1271.2.3.4.1.1.6.3	Counter64	read-only	The number of linktrace messages received.
C64 cienaCesCfmGlobalLinkTraceStatsRxTotalLTR	1.3.6.1.4.1.1271.2.3.4.1.1.6.4	Counter64	read-only	The number of linktrace replies received.
C64 cienaCesCfmGlobalLinkTraceStatsRxTotalUnexpectedLTR	1.3.6.1.4.1.1271.2.3.4.1.1.6.5	Counter64	read-only	The number of unexpected linktrace replies received.
C64 cienaCesCfmGlobalLinkTraceStatsRxUnresolvedLTM	1.3.6.1.4.1.1271.2.3.4.1.1.6.9	Counter64	read-only	The number of linktrace messages received that could not be resolved.
C64 cienaCesCfmGlobalLinkTraceStatsRxUnresolvedLTR	1.3.6.1.4.1.1271.2.3.4.1.1.6.10	Counter64	read-only	The number of linktrace replies received that could not be resolved.
C64 cienaCesCfmGlobalLinkTraceStatsTxTotalLTM	1.3.6.1.4.1.1271.2.3.4.1.1.6.1	Counter64	read-only	The number of linktrace messages transmitted.
C64 cienaCesCfmGlobalLinkTraceStatsTxTotalLTR	1.3.6.1.4.1.1271.2.3.4.1.1.6.2	Counter64	read-only	The number of linktrace replies transmitted.
cienaCesCfmGlobalLoopbackStats	1.3.6.1.4.1.1271.2.3.4.1.1.5
C64 cienaCesCfmGlobalLoopbackStatsRxLBMInvalidFirstTLVOffset	1.3.6.1.4.1.1271.2.3.4.1.1.5.9	Counter64	read-only	The total number of loopback message frames received with invalid TLV offset.
C64 cienaCesCfmGlobalLoopbackStatsRxLBRInvalidFirstTLVOffset	1.3.6.1.4.1.1271.2.3.4.1.1.5.10	Counter64	read-only	The total number of loopback reply frames received with invalid first TLV offset.
C64 cienaCesCfmGlobalLoopbackStatsRxTotalContentMismatchLBR	1.3.6.1.4.1.1271.2.3.4.1.1.5.7	Counter64	read-only	The total number of content mismatch loopback reply frames sent.
C64 cienaCesCfmGlobalLoopbackStatsRxTotalInOrderLBR	1.3.6.1.4.1.1271.2.3.4.1.1.5.5	Counter64	read-only	The total number of in order loopback reply frames received.
C64 cienaCesCfmGlobalLoopbackStatsRxTotalLBM	1.3.6.1.4.1.1271.2.3.4.1.1.5.3	Counter64	read-only	The total number of loopback message frames received.
C64 cienaCesCfmGlobalLoopbackStatsRxTotalLBR	1.3.6.1.4.1.1271.2.3.4.1.1.5.4	Counter64	read-only	The total number of loopback reply frames received.
C64 cienaCesCfmGlobalLoopbackStatsRxTotalMalformedLBM	1.3.6.1.4.1.1271.2.3.4.1.1.5.13	Counter64	read-only	The total number of malformed loopback messages received.
C64 cienaCesCfmGlobalLoopbackStatsRxTotalOutOfOrderLBR	1.3.6.1.4.1.1271.2.3.4.1.1.5.6	Counter64	read-only	The total number of out of order loopback reply frames received.
C64 cienaCesCfmGlobalLoopbackStatsRxTotalUnexpectedLBR	1.3.6.1.4.1.1271.2.3.4.1.1.5.8	Counter64	read-only	The total number of unexpected loopback reply frames received.
C64 cienaCesCfmGlobalLoopbackStatsRxUnresolvedLBM	1.3.6.1.4.1.1271.2.3.4.1.1.5.11	Counter64	read-only	The total number of unresolved loopback message frames received.
C64 cienaCesCfmGlobalLoopbackStatsRxUnresolvedLBR	1.3.6.1.4.1.1271.2.3.4.1.1.5.12	Counter64	read-only	The total number of unresolved loopback reply frames received.
C64 cienaCesCfmGlobalLoopbackStatsTxTotalLBM	1.3.6.1.4.1.1271.2.3.4.1.1.5.1	Counter64	read-only	The number of loopback message frames sent.
C64 cienaCesCfmGlobalLoopbackStatsTxTotalLBR	1.3.6.1.4.1.1271.2.3.4.1.1.5.2	Counter64	read-only	The total number of loopback reply frames sent.
cienaCesCfmGlobalLossMeasurementStats	1.3.6.1.4.1.1271.2.3.4.1.1.8
C64 cienaCesCfmGlobalLossMeasurementStatsRxTotalLMM	1.3.6.1.4.1.1271.2.3.4.1.1.8.3	Counter64	read-only	The number of LMM frames received.
C64 cienaCesCfmGlobalLossMeasurementStatsRxTotalLMR	1.3.6.1.4.1.1271.2.3.4.1.1.8.4	Counter64	read-only	The number of LMR frames received.
C64 cienaCesCfmGlobalLossMeasurementStatsTxTotalLMM	1.3.6.1.4.1.1271.2.3.4.1.1.8.1	Counter64	read-only	The number of LMM frames transmitted.
C64 cienaCesCfmGlobalLossMeasurementStatsTxTotalLMR	1.3.6.1.4.1.1271.2.3.4.1.1.8.2	Counter64	read-only	The number of LMR frames transmitted.
cienaCesCfmGlobalMIBObjects	1.3.6.1.4.1.1271.2.3.4.1.1
I32 cienaCesCfmGlobalSLMDefaultCount	1.3.6.1.4.1.1271.2.1.4.1.11.5	Integer32	read-only	The global default count for synthetic loss measurement tests.
I32 cienaCesCfmGlobalSLMDefaultInterval	1.3.6.1.4.1.1271.2.1.4.1.11.6	Integer32	read-only	The global default interval for synthetic loss measurement tests. The value ranges from 3 to 7. The values 3-7 represent indices to CFM intervals as follows: 3 --> 100ms, 4 --> 1sec, 5 --> 10sec, 6 --> 1min, 7 --> 10min.
I32 cienaCesCfmGlobalSLMDefaultTimeout	1.3.6.1.4.1.1271.2.1.4.1.11.7	Integer32	read-only	The global default timeout for synthetic loss measurement tests.
cienaCesCfmGlobalStats	1.3.6.1.4.1.1271.2.3.4.1.1.3
CIE cienaCesCfmGlobalStatsClear	1.3.6.1.4.1.1271.2.3.4.1.1.1	CienaStatsClear	read-write	Setting this object clears CFM statistics globally.
C64 cienaCesCfmGlobalStatsRxDropInvalidEtype	1.3.6.1.4.1.1271.2.3.4.1.1.3.7	Counter64	read-only	The number of frames dropped when the mode is administratively disabled.
C64 cienaCesCfmGlobalStatsRxDropInvalidOpCode	1.3.6.1.4.1.1271.2.3.4.1.1.3.8	Counter64	read-only	The number of received invalid opcode frames dropped.
C64 cienaCesCfmGlobalStatsRxDropL2DAHeaderLevelMismatch	1.3.6.1.4.1.1271.2.3.4.1.1.3.9	Counter64	read-only	The number of frames dropped when the system is not in STP forwarding mode.
C64 cienaCesCfmGlobalStatsRxTotalFrames	1.3.6.1.4.1.1271.2.3.4.1.1.3.6	Counter64	read-only	The number of frames received.
C64 cienaCesCfmGlobalStatsRxTotalMalformedFrames	1.3.6.1.4.1.1271.2.3.4.1.1.3.10	Counter64	read-only	The number of malformed CFM frames received.
C64 cienaCesCfmGlobalStatsTxFloodedframes	1.3.6.1.4.1.1271.2.3.4.1.1.3.2	Counter64	read-only	The number of flooded frames sent.
C64 cienaCesCfmGlobalStatsTxFloodignoredHighLevelMepExist	1.3.6.1.4.1.1271.2.3.4.1.1.3.4	Counter64	read-only	This counter is incremented when there is a MEP at a higher MD level than the frame's MD level that blocks the frame from being flooded.
C64 cienaCesCfmGlobalStatsTxFloodignoredInvalidLevel	1.3.6.1.4.1.1271.2.3.4.1.1.3.3	Counter64	read-only	This counter is incremented when the frame's destination MAC is not the expected multicast destination MAC for the frame's MD level.
C64 cienaCesCfmGlobalStatsTxFloodignoredSTPState	1.3.6.1.4.1.1271.2.3.4.1.1.3.5	Counter64	read-only	This counter is incremented when the STP state of the ingress or egress port is something other than forwarding.
C64 cienaCesCfmGlobalStatsTxTotalFrames	1.3.6.1.4.1.1271.2.3.4.1.1.3.1	Counter64	read-only	The number of CFM frames sent.
cienaCesCfmGlobalSyntheticLossMeasurementStats	1.3.6.1.4.1.1271.2.3.4.1.1.9
C64 cienaCesCfmGlobalSyntheticLossMeasurementStatsRxDropSLM	1.3.6.1.4.1.1271.2.3.4.1.1.9.9	Counter64	read-only	The total number of synthetic loss messages dropped due to lack of responder resources.
C64 cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalInvalidSLM	1.3.6.1.4.1.1271.2.3.4.1.1.9.7	Counter64	read-only	The total number of invalid synthetic loss messages received.
C64 cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalInvalidSLR	1.3.6.1.4.1.1271.2.3.4.1.1.9.8	Counter64	read-only	The total number of invalid synthetic loss replies received.
C64 cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalSLM	1.3.6.1.4.1.1271.2.3.4.1.1.9.3	Counter64	read-only	The total number of synthetic loss messages received.
C64 cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalSLR	1.3.6.1.4.1.1271.2.3.4.1.1.9.4	Counter64	read-only	The total number of synthetic loss replies received.
C64 cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalValidSLM	1.3.6.1.4.1.1271.2.3.4.1.1.9.5	Counter64	read-only	The total number of valid synthetic loss messages received.
C64 cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalValidSLR	1.3.6.1.4.1.1271.2.3.4.1.1.9.6	Counter64	read-only	The total number of valid synthetic loss replies received.
C64 cienaCesCfmGlobalSyntheticLossMeasurementStatsTxTotalSLM	1.3.6.1.4.1.1271.2.3.4.1.1.9.1	Counter64	read-only	The total number of synthetic loss messages transmitted.
C64 cienaCesCfmGlobalSyntheticLossMeasurementStatsTxTotalSLR	1.3.6.1.4.1.1271.2.3.4.1.1.9.2	Counter64	read-only	The total number of synthetic loss replies transmitted.
cienaCesCfmMaintenance	1.3.6.1.4.1.1271.2.1.4.1.8
cienaCesCfmMaintenanceDomainEntry	1.3.6.1.4.1.1271.2.1.4.1.8.1.1		not-accessible	An entry (conceptual row) in the cienaCesCfmMaintenanceDomainTable.
U32 cienaCesCfmMaintenanceDomainIndex	1.3.6.1.4.1.1271.2.1.4.1.8.1.1.1	Unsigned32	read-only	This object indicates the unique index in the table.
INT cienaCesCfmMaintenanceDomainLevel	1.3.6.1.4.1.1271.2.1.4.1.8.1.1.2	INTEGER	read-only	This object indicates the maintenance domain level.
STR cienaCesCfmMaintenanceDomainName	1.3.6.1.4.1.1271.2.1.4.1.8.1.1.3	DisplayString	read-only	This object indicates the maintenance domain name.
U32 cienaCesCfmMaintenanceDomainServiceCount	1.3.6.1.4.1.1271.2.1.4.1.8.1.1.4	Unsigned32	read-only	This object indicates the number of CFM services mapped to this maintenance domain.
cienaCesCfmMaintenanceDomainTable	1.3.6.1.4.1.1271.2.1.4.1.8.1		not-accessible	The (conceptual) table listing the configuration parameters for the CFM maintenance domain table.
NTF cienaCesCfmMaximumDelayFaultTrapClear	1.3.6.1.4.1.1271.2.2.5.0.6			A notification is sent whenever maximum delay comes back to normal. Setting the cienaCesCfmDelayFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgMaximumDelayThreshold, and cienaCesCfmDelayMsgMaximumDelay.
NTF cienaCesCfmMaximumDelayFaultTrapSet	1.3.6.1.4.1.1271.2.2.5.0.5			A notification is sent whenever maximum delay goes above delay-threshold during a delay measurement test. Setting the cienaCesCfmDelayFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgMaximumDelayThreshold, and cienaCesCfmDelayMsgMaximumDelay.
NTF cienaCesCfmMaximumDelayVariationTrapClear	1.3.6.1.4.1.1271.2.2.5.0.22			A notification is sent whenever Maximum Delay Variation comes back below the threshold level during a Delay Variation measurement test. Setting the cienaCesCfmDelayVariationFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgMaximumDelayVariationThreshold, and cienaCesCfmDelayMsgMaximumDelayVariation.
NTF cienaCesCfmMaximumDelayVariationTrapSet	1.3.6.1.4.1.1271.2.2.5.0.21			A notification is sent whenever Maximum Delay Variation goes above Maximum Delay Variation threshold during a Delay Variation measurement test. Setting the cienaCesCfmDelayVariationFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgMaximumDelayVariationThreshold, and cienaCesCfmDelayMsgMaximumDelayVariation.
NTF cienaCesCfmMaximumJitterTrapClear	1.3.6.1.4.1.1271.2.2.5.0.10			A notification is sent whenever maximum jitter comes back to normal. Setting the cienaCesCfmJitterFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity,cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgMaximumJitterThreshold, and cienaCesCfmDelayMsgMaximumJitter.
NTF cienaCesCfmMaximumJitterTrapSet	1.3.6.1.4.1.1271.2.2.5.0.9			A notification is sent whenever maximum jitter goes above maximum jitter-threshold during a jitter measurement test. Setting the cienaCesCfmJitterFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmDelayMsgServiceName, cienaCesCfmDelayMsgLocalMEPId, cienaCesCfmDelayMsgMaximumJitterThreshold, and cienaCesCfmDelayMsgMaximumJitter.
cienaCesCfmMEP	1.3.6.1.4.1.1271.2.1.4.1.3
CIE cienaCesCfmMEPAdminState	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.3	CienaGlobalState	read-only	This object is used to specify the administrative state of the CFM MEP.
INT cienaCesCfmMEPCCMPriority	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.7	INTEGER	read-only	This object indicates the priority of CCM messages transmitted.
CIE cienaCesCfmMEPCCMState	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.6	CienaGlobalState	read-only	This object indicates the CCM transmission for the service specified by cienaCesCfmServiceType.
INT cienaCesCfmMEPDirection	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.5	INTEGER	read-only	This object is used to specify the MEP direction of the service.
INT cienaCesCfmMEPEncapsulation	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.16	INTEGER	read-only	This object is used to specify the encapsulation applied to the service and port.
cienaCesCfmMEPEntry	1.3.6.1.4.1.1271.2.1.4.1.3.1.1		not-accessible	An entry (conceptual row) in the cienaCesCfmMEPTable.
I32 cienaCesCfmMEPHoldTime	1.3.6.1.4.1.1271.2.1.4.1.11.3	Integer32	read-only	This object indicates the time to hold a MEP in an inactive state.
U32 cienaCesCfmMEPId	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.1	Unsigned32	not-accessible	This MIB object is used as the index in the table and indicates the MEP ID for the given service.
U32 cienaCesCfmMepInterfaceIndex	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.2	Unsigned32	read-only	This object is used as the index in the table and indicates the MEP interface index for the given service.
NUM cienaCesCfmMepInterfaceType	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.1	CienaCesCfmInterfaceType	read-only	This object is used as the index in the table and indicates the MEP interface for the given service.
INT cienaCesCfmMEPL2XformType	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.20	INTEGER	read-only	This object indicates the type of MEP L2 transform. no-op(1) type indicates that there is no MEP level transform. auto(2) type indicates that the MEP inherits the sub-port vtag-stack.
U32 cienaCesCfmMEPLeadPortSlotIndex	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.17	Unsigned32	read-only	This object is used as to specify the agent slot that the MEP is in.
U32 cienaCesCfmMEPLiIndex	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.10	Unsigned32	read-only	This object indicates the logical interface index for creating the MEP.
INT cienaCesCfmMEPLiType	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.9	INTEGER	read-only	This object indicates the logical interface type on which the MEP is created.
STR cienaCesCfmMEPLogicalPortName	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.14	DisplayString	read-only	This object indicates the logical port name assigned to the given service and port.
INT cienaCesCfmMEPLTMPriority	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.8	INTEGER	read-only	This object indicates the priority received on the given service and port.
MAC cienaCesCfmMEPMacAddr	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.2	MacAddress	read-only	This object indicates the MAC address received on the given service and MEP ID.
CIE cienaCesCfmMEPOperState	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.4	CienaGlobalState	read-only	This object is used to specify the operational state of the CFM MEP.
U32 cienaCesCfmMEPPBTBvid	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.18	Unsigned32	read-only	This object indicates the BVID assigned to the given service and port.
U32 cienaCesCfmMEPPBTEtype	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.19	Unsigned32	read-only	This object indicates the Ethertype assigned to the given service and port.
STR cienaCesCfmMEPServiceName	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.11	DisplayString	read-only	This object is used to specify the service name assigned to this port.
T/F cienaCesCfmMEPSignalDegradeMonitoringStatus	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.21	TruthValue	read-only	This object enables/disables signal degrading monitoring on the mep.
INT cienaCesCfmMEPSignalDegradeTriggerMode	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.22	INTEGER	read-only	This object sets the signal degrade trigger mode on the mep. nearEnd: In this mode, near end frame loss shall be compared with cienaCesCfmSyntheticLossSessionSdSetThreshold and cienaCesCfmSyntheticLossSessionSdClearThreshold. nearFarEnd: In this mode, both near end and far end frame loss shall be compared with cienaCesCfmSyntheticLossSessionSdSetThreshold and cienaCesCfmSyntheticLossSessionSdClearThreshold.
cienaCesCfmMepStats	1.3.6.1.4.1.1271.2.3.4.1.3
cienaCesCfmMepStatsEntry	1.3.6.1.4.1.1271.2.3.4.1.3.1.1		not-accessible	An entry (conceptual row) in the cienaCesCfmMepStatsTable.
U32 cienaCesCfmMepStatsLastDMMNumOfDmmToSend	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.39	Unsigned32	read-only	This object indicates the number of DMMs to send for the last DMM for the CFM MEP.
U32 cienaCesCfmMepStatsLastDMMPriority	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.37	Unsigned32	read-only	This object indicates the last DMM priority for the CFM MEP.
U32 cienaCesCfmMepStatsLastDMMRepeatInterval	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.38	Unsigned32	read-only	This object indicates the last DMM repeat interval for the CFM MEP.
ADR cienaCesCfmMepStatsLastDMMTargetMacAddress	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.36	CienaMacAddress	read-only	This object indicates the last DMM target MAC address for the CFM MEP.
U32 cienaCesCfmMepStatsLastDMMTargetRemoteMepId	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.35	Unsigned32	read-only	This object indicates the last DMM target remote MEP ID for the CFM MEP.
U32 cienaCesCfmMepStatsLastLBMCount	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.28	Unsigned32	read-only	This object indicates the last loopback message count.
U32 cienaCesCfmMepStatsLastLBMFirstSeqNum	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.29	Unsigned32	read-only	This object indicates the last loopback message first sequence number.
U32 cienaCesCfmMepStatsLastLBMPriority	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.27	Unsigned32	read-only	This object indicates the last loopback message priority.
ADR cienaCesCfmMepStatsLastLBMTargetMacAddress	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.26	CienaMacAddress	read-only	This object indicates the target MAC address for the last loopback message.
U32 cienaCesCfmMepStatsLastLBMTargetRemoteMepId	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.25	Unsigned32	read-only	This object indicates the remote MEP ID of the last loopback message.
U32 cienaCesCfmMepStatsLastLMMNumOfLmmToSend	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.44	Unsigned32	read-only	This object indicates the number of LMMs to send for the last LMM for the CFM MEP.
U32 cienaCesCfmMepStatsLastLMMPriority	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.42	Unsigned32	read-only	This object indicates the last LMM priority for the CFM MEP.
U32 cienaCesCfmMepStatsLastLMMRepeatInterval	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.43	Unsigned32	read-only	This object indicates the last LMM repeat interval for the CFM MEP.
ADR cienaCesCfmMepStatsLastLMMTargetMacAddress	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.41	CienaMacAddress	read-only	This object indicates the last LMM target MAC Address for the CFM MEP.
U32 cienaCesCfmMepStatsLastLMMTargetRemoteMepId	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.40	Unsigned32	read-only	This object indicates the last LMM target remote MEP ID for the CFM MEP.
U32 cienaCesCfmMepStatsLastLTMInitialTTL	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.34	Unsigned32	read-only	This object indicates the last linktrace message initial TTL of the CFM MEP.
U32 cienaCesCfmMepStatsLastLTMPriority	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.32	Unsigned32	read-only	This object indicates the last linktrace message priority of the CFM MEP.
U32 cienaCesCfmMepStatsLastLTMSeqNum	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.33	Unsigned32	read-only	This object indicates the last linktrace message sequence number of the CFM MEP.
ADR cienaCesCfmMepStatsLastLTMTargetMacAddress	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.31	CienaMacAddress	read-only	This object indicates the target MAC address of the the last linktrace message.
U32 cienaCesCfmMepStatsLastLTMTargetRemoteMepId	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.30	Unsigned32	read-only	This object indicates the last linktrace message target remote MEP ID.
C32 cienaCesCfmMepStatsNextLBMSeqNumber	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.45	Counter32	read-only	This object indicates the next LBM sequence number received on the given service and port.
C32 cienaCesCfmMepStatsNextLTMSeqNumber	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.46	Counter32	read-only	This object indicates the next LTM sequence number received on the given service and port.
C64 cienaCesCfmMepStatsRxCCMDroppedWithMalformedTlv	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.61	Counter64	read-only	The total number of CCMs received by the CFM MEP which were dropped because of malformed TLV.
C64 cienaCesCfmMepStatsRxCCMWithErrorCCMFault	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.55	Counter64	read-only	The total number of CCMs with Error CCM fault received by the CFM MEP.
C64 cienaCesCfmMepStatsRxCCMWithRDI0	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.58	Counter64	read-only	The total number of CCMs with RDI bit 0 received by the CFM MEP.
C64 cienaCesCfmMepStatsRxCCMWithRDI1	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.59	Counter64	read-only	The total number of CCMs with RDI bit set received by the CFM MEP.
C64 cienaCesCfmMepStatsRxCCMWithRMEPLOCFault	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.57	Counter64	read-only	The total number of CCMs with RMEP LOC fault received by the CFM MEP.
C64 cienaCesCfmMepStatsRxCCMWithSequenceNumberMismatch	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.60	Counter64	read-only	The total number of CCMs with sequence number mismatch received by the CFM MEP.
C64 cienaCesCfmMepStatsRxCCMWithXCONFault	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.56	Counter64	read-only	The total number of CCMs with XCON fault received by the CFM MEP.
C64 cienaCesCfmMepStatsRxContentMismatchLoopbackReply	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.10	Counter64	read-only	The total number of content mismatched loopback replies received by the CFM MEP.
C64 cienaCesCfmMepStatsRxDelayMeasurementMessage	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.19	Counter64	read-only	The total number of DMM messages received by the CFM MEP.
C64 cienaCesCfmMepStatsRxDelayMeasurementReply	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.20	Counter64	read-only	The total number of DMM replies received by the CFM MEP.
C64 cienaCesCfmMepStatsRxInorderLoopbackReply	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.8	Counter64	read-only	The total number of in-order loopback replies received by the CFM MEP.
C64 cienaCesCfmMepStatsRxInvalidSyntheticLossMeasurementMessage	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.53	Counter64	read-only	The total number invalid of synthetic loss messages received by the CFM MEP.
C64 cienaCesCfmMepStatsRxInvalidSyntheticLossMeasurementReply	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.54	Counter64	read-only	The total number invalid of synthetic loss replies received by the CFM MEP.
C64 cienaCesCfmMepStatsRxLinktraceMessage	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.14	Counter64	read-only	The total number of linktrace messages received by the CFM MEP.
C64 cienaCesCfmMepStatsRxLinktraceReply	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.15	Counter64	read-only	The total number of linktrace replies received by the CFM MEP.
C64 cienaCesCfmMepStatsRxLoopbackMessages	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.7	Counter64	read-only	The total number of loopback messages received by the CFM MEP.
C64 cienaCesCfmMepStatsRxLossMeasurementMessage	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.23	Counter64	read-only	The total number of LMM messages received by the CFM MEP.
C64 cienaCesCfmMepStatsRxLossMeasurementReply	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.24	Counter64	read-only	The total number of LMM replies received by the CFM MEP.
C64 cienaCesCfmMepStatsRxOutoforderLoopbackReply	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.9	Counter64	read-only	The total number of out-of-order loopback replies received by the CFM MEP.
C64 cienaCesCfmMepStatsRxSyntheticLossMeasurementMessage	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.49	Counter64	read-only	The total number of synthetic loss messages received by the CFM MEP.
C64 cienaCesCfmMepStatsRxSyntheticLossMeasurementReply	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.50	Counter64	read-only	The total number of synthetic loss replies received by the CFM MEP.
C64 cienaCesCfmMepStatsRxTotalCCM	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.4	Counter64	read-only	The total number of CCM messages received by the CFM MEP.
C64 cienaCesCfmMepStatsRxUnexpectedLinktraceReply	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.16	Counter64	read-only	The total number of unexpected linktrace replies received by the CFM MEP.
C64 cienaCesCfmMepStatsRxUnexpectedLoopbackReply	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.11	Counter64	read-only	The total number of unexpected loopback replies received by the CFM MEP.
C64 cienaCesCfmMepStatsRxValidSyntheticLossMeasurementMessage	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.51	Counter64	read-only	The total number valid of synthetic loss messages received by the CFM MEP.
C64 cienaCesCfmMepStatsRxValidSyntheticLossMeasurementReply	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.52	Counter64	read-only	The total number valid of synthetic loss replies received by the CFM MEP.
cienaCesCfmMepStatsTable	1.3.6.1.4.1.1271.2.3.4.1.3.1		not-accessible	The (conceptual) table listing the configuration parameters for the CFM MEP table.
C64 cienaCesCfmMepStatsToTxLoopbackMessages	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.62	Counter64	read-only	The total number of loopback messages left to be transmitted by the CFM MEP.
C64 cienaCesCfmMepStatsTxDelayMeasurementMessage	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.17	Counter64	read-only	The total number of DMM messages transmitted by the CFM MEP.
C64 cienaCesCfmMepStatsTxDelayMeasurementReply	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.18	Counter64	read-only	The total number of DMM replies transmitted by the CFM MEP.
C64 cienaCesCfmMepStatsTxLinktraceMessage	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.12	Counter64	read-only	The total number of linktrace messages transmitted by the CFM MEP.
C64 cienaCesCfmMepStatsTxLinktraceReply	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.13	Counter64	read-only	The total number of linktrace replies transmitted by the CFM MEP.
C64 cienaCesCfmMepStatsTxLoopbackMessages	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.5	Counter64	read-only	The total number of loopback messages transmitted by the CFM MEP.
C64 cienaCesCfmMepStatsTxLoopbackReply	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.6	Counter64	read-only	The total number of loopback replies transmitted by the CFM MEP.
C64 cienaCesCfmMepStatsTxLossMeasurementMessage	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.21	Counter64	read-only	The total number of LMM messages transmitted by the CFM MEP.
C64 cienaCesCfmMepStatsTxLossMeasurementReply	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.22	Counter64	read-only	The total number of LMM replies transmitted by the CFM MEP.
C64 cienaCesCfmMepStatsTxSyntheticLossMeasurementMessage	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.47	Counter64	read-only	The total number of synthetic loss messages transmitted by the CFM MEP.
C64 cienaCesCfmMepStatsTxSyntheticLossMeasurementReply	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.48	Counter64	read-only	The total number of synthetic loss replies transmitted by the CFM MEP.
C64 cienaCesCfmMepStatsTxTotalCCM	1.3.6.1.4.1.1271.2.3.4.1.3.1.1.3	Counter64	read-only	The total number of CCM messages transmitted by the CFM MEP.
U32 cienaCesCfmMEPSubPortIndex	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.15	Unsigned32	read-only	This object is used to specify the CFM sub-port index.
STR cienaCesCfmMEPSubPortName	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.12	DisplayString	read-only	This object indicates the sub-port, PBB-TE service or MPLS VC name assigned to the given service and port.
cienaCesCfmMEPTable	1.3.6.1.4.1.1271.2.1.4.1.3.1		not-accessible	The (conceptual) table listing the configuration parameters for the CFM MEP table.
STR cienaCesCfmMEPVsPbtName	1.3.6.1.4.1.1271.2.1.4.1.3.1.1.13	DisplayString	read-only	This object indicates the virtual switch or PBB-TE tunnel assigned to the given service and port.
cienaCesCfmMIB	1.3.6.1.4.1.1271.2.1.4			This module defines the CFM configuration and notification objects.
cienaCesCfmMIBObjects	1.3.6.1.4.1.1271.2.3.4.1
cienaCesCfmNotifMIBNotification	1.3.6.1.4.1.1271.2.2.5.0
cienaCesCfmNotifMIBNotificationPrefix	1.3.6.1.4.1.1271.2.2.5
cienaCesCfmRemoteMEP	1.3.6.1.4.1.1271.2.1.4.1.4
CIE cienaCesCfmRemoteMEPAdminState	1.3.6.1.4.1.1271.2.1.4.1.4.1.1.3	CienaGlobalState	read-only	This object is used to specify the administrative state of the remote MEP state machine.
T/F cienaCesCfmRemoteMEPCCMErrorFlag	1.3.6.1.4.1.1271.2.1.4.1.4.1.1.8	TruthValue	read-only	This object is used to specify the MEP CCM error flag.
INT cienaCesCfmRemoteMEPCCMLevel	1.3.6.1.4.1.1271.2.1.4.1.4.1.1.14	INTEGER	read-only	This object indicates the remote MEP CCM level.
cienaCesCfmRemoteMEPEntry	1.3.6.1.4.1.1271.2.1.4.1.4.1.1		not-accessible	An entry (conceptual row) in the cienaCesCfmRemoteMEPTable.
T/F cienaCesCfmRemoteMEPFailureFlag	1.3.6.1.4.1.1271.2.1.4.1.4.1.1.7	TruthValue	read-only	This object is used to specify the remote MEP failure flag.
INT cienaCesCfmRemoteMEPHoldState	1.3.6.1.4.1.1271.2.1.4.1.4.1.1.15	INTEGER	read-only	This object indicates the hold state for the remote MEP entry.
U32 cienaCesCfmRemoteMEPID	1.3.6.1.4.1.1271.2.1.4.1.4.1.1.1	Unsigned32	not-accessible	This object is used as an index in the table and is used to specify the MEP ID.
T/F cienaCesCfmRemoteMEPKLastMacStatus	1.3.6.1.4.1.1271.2.1.4.1.4.1.1.6	TruthValue	read-only	This object is used to specify the last MAC status received.
INT cienaCesCfmRemoteMEPLastInterfaceStatus	1.3.6.1.4.1.1271.2.1.4.1.4.1.1.13	INTEGER	read-only	This object is used as to specify the remote MEP interface status.
INT cienaCesCfmRemoteMEPLastPortStatus	1.3.6.1.4.1.1271.2.1.4.1.4.1.1.12	INTEGER	read-only	This object is used as to specify the remote MEP last port status.
MAC cienaCesCfmRemoteMEPMacAddr	1.3.6.1.4.1.1271.2.1.4.1.4.1.1.2	MacAddress	read-only	This object is used to specify the MAC address of the logical port where the remote MEP is configured.
INT cienaCesCfmRemoteMEPOperState	1.3.6.1.4.1.1271.2.1.4.1.4.1.1.4	INTEGER	read-only	This object is used to specify the operational state of the remote MEP state machine.
T/F cienaCesCfmRemoteMEPRDIErrorFlag	1.3.6.1.4.1.1271.2.1.4.1.4.1.1.9	TruthValue	read-only	This object is used to specify the MEP RDI error flag.
STR cienaCesCfmRemoteMEPServiceName	1.3.6.1.4.1.1271.2.1.4.1.4.1.1.11	DisplayString	read-only	This object is used to specify the service name of the remote MEP.
U32 cienaCesCfmRemoteMepStatsCCMSeqErrors	1.3.6.1.4.1.1271.2.3.4.1.3.2.1.3	Unsigned32	read-only	This object is used to show the number of MEP CCM frames sequence errors.
CIE cienaCesCfmRemoteMepStatsClear	1.3.6.1.4.1.1271.2.3.4.1.3.2.1.4	CienaStatsClear	read-write	Setting this object to clear(1) resets the statistics for the remote MEP for this service.
cienaCesCfmRemoteMepStatsEntry	1.3.6.1.4.1.1271.2.3.4.1.3.2.1		not-accessible	An entry (conceptual row) in the cienaCesCfmMepStatsTable.
U32 cienaCesCfmRemoteMepStatsLastSeqNum	1.3.6.1.4.1.1271.2.3.4.1.3.2.1.2	Unsigned32	read-only	This object is used to show the last sequence number.
C32 cienaCesCfmRemoteMepStatsRxTotalCCM	1.3.6.1.4.1.1271.2.3.4.1.3.2.1.1	Counter32	read-only	This object is used to show the number of MEP CCM frames received.
cienaCesCfmRemoteMepStatsTable	1.3.6.1.4.1.1271.2.3.4.1.3.2		not-accessible	The (conceptual) table listing the configuration parameters for the CFM remote MEP table.
STR cienaCesCfmRemoteMEPSubPortName	1.3.6.1.4.1.1271.2.1.4.1.4.1.1.10	DisplayString	read-only	The object indicates the subport name of the remote MEP.
cienaCesCfmRemoteMEPTable	1.3.6.1.4.1.1271.2.1.4.1.4.1		not-accessible	The (conceptual) table listing the display parameters for the remote MEP table.
TIK cienaCesCfmRemoteMEPTime	1.3.6.1.4.1.1271.2.1.4.1.4.1.1.5	TimeTicks	read-only	This object is used to specify the time at which the remote MEP state machine last entered RMEP_FAILED or RMEP_OK states.
cienaCesCfmService	1.3.6.1.4.1.1271.2.1.4.1.2
CIE cienaCesCfmServiceAdminState	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.4	CienaGlobalState	read-only	This object indicates the administrative state of CFM for this service type.
U32 cienaCesCfmServiceAlarmPriority	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.20	Unsigned32	read-only	This MIB object indicates the alarm priority for a given service. The value ranges from 1 to 5. The value 1-5 represent the priority according to faults: 1 --> RDI, 2 --> Mac Status, 3 --> Remote Mep, 4 --> Error Ccm, 5 --> Xcon Ccm.
INT cienaCesCfmServiceAlarmTime	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.9	INTEGER	read-only	This MIB object indicates the time interval that a service fault detected by cienaCesCfmServiceType must be present prior to triggering a fault alarm.
T/F cienaCesCfmServiceCCMErrorFlag	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.14	TruthValue	read-only	This MIB object indicates whether the CCM error flag is set.
INT cienaCesCfmServiceCCMInterval	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.10	INTEGER	read-only	This MIB object identifies the CCM transmission interval index for the service specified by cienaCesCfmServiceType. This determines the frequency at which CCMs are transmitted. The length of the interval increases exponentially with the index value. When the interval is zero (0), CCM transmission is disabled from all MEPs in the MA.
INT cienaCesCfmServiceCCMLossBucketInterval	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.25	INTEGER	read-only	This object indicates the interval in minutes that each of the 96 CCM loss history buckets spans. The default is 15 minutes, which means the default history covers 24 hours.
CIE cienaCesCfmServiceCCMLossStatsState	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.24	CienaGlobalState	read-only	This object indicates the operational state of CCM loss accounting for RMEPs learned by this service type.
T/F cienaCesCfmServiceCCMRxStats	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.38	TruthValue	read-only	Controls cfm rx debug stats for the service.
CIE cienaCesCfmServiceCCMTxState	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.29	CienaGlobalState	read-only	This MIB object indicates the administrative state of the CCM Tx.
T/F cienaCesCfmServiceChargedAgainstGlobalBudget	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.35	TruthValue	read-only	This MIB object reflects if this service is charged against the global frame budget.
C32 cienaCesCfmServiceControlModuleFrameBudget	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.36	Counter32	read-only	CFM frame budget for the control timing module for the given service.
T/F cienaCesCfmServiceCrossConnectErrorFlag	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.15	TruthValue	read-only	This MIB object indicates whether the cross-connect error flag is set.
INT cienaCesCfmServiceDMMInterval	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.22	INTEGER	read-only	This MIB object indicates the DMM transmission interval index for the service specified by cienaCesCfmServiceType. This determines the frequency at which DMMs are transmitted. The length of the interval increases exponentially with the index value. The value ranges from 3 to 7. The values 3-7 represent indices to CFM intervals as follows: 3 --> 100ms, 4 --> 1sec, 5 --> 10sec, 6 --> 1min, 7 --> 10min.
cienaCesCfmServiceEntry	1.3.6.1.4.1.1271.2.1.4.1.2.1.1		not-accessible	An entry (conceptual row) in the cienaCesCfmServiceTable.
STR cienaCesCfmServiceFaultDesc	1.3.6.1.4.1.1271.2.1.4.1.7.1.1.3	DisplayString	accessible-for-notify	This object indicates the description of the fault.
INT cienaCesCfmServiceFaultMep	1.3.6.1.4.1.1271.2.1.4.1.7.1.1.4	INTEGER	accessible-for-notify	This object indicates the MEP ID of the MEP reporting the fault.
cienaCesCfmServiceFaultNotifAttrs	1.3.6.1.4.1.1271.2.1.4.1.7
cienaCesCfmServiceFaultNotifEntry	1.3.6.1.4.1.1271.2.1.4.1.7.1.1		not-accessible	An entry (conceptual row) in the cienaCesCfmServiceFaultNotifTable.
cienaCesCfmServiceFaultNotifTable	1.3.6.1.4.1.1271.2.1.4.1.7.1		not-accessible	The (conceptual) table listing the configuration parameters for the CFM service table.
CIE cienaCesCfmServiceFaultState	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.8	CienaGlobalState	read-only	When this object's state is disabled it suppresses all the corresponding CFM service related traps.
TIK cienaCesCfmServiceFaultTime	1.3.6.1.4.1.1271.2.1.4.1.7.1.1.1	TimeTicks	accessible-for-notify	This object indicates the time at which the fault occurred.
INT cienaCesCfmServiceFaultType	1.3.6.1.4.1.1271.2.1.4.1.7.1.1.2	INTEGER	accessible-for-notify	This object indicates the type of fault.
cienaCesCfmServiceFrameBudget	1.3.6.1.4.1.1271.2.1.4.1.9
cienaCesCfmServiceFrameBudgetEntry	1.3.6.1.4.1.1271.2.1.4.1.9.1.1		not-accessible	An entry (conceptual row) in the cienaCesCfmServiceFrameBudgetTable.
C32 cienaCesCfmServiceFrameBudgetSlot	1.3.6.1.4.1.1271.2.1.4.1.9.1.1.2	Counter32	read-only	This object indicates the CFM frame budget for the slot for the given service.
cienaCesCfmServiceFrameBudgetTable	1.3.6.1.4.1.1271.2.1.4.1.9.1		not-accessible	The (conceptual) table listing the configuration parameters for the CFM service frame budget table.
U32 cienaCesCfmServiceIndex	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.1	Unsigned32	not-accessible	A unique identifier for a CFM domain entry.
T/F cienaCesCfmServiceInstabilityFlag	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.32	TruthValue	read-only	This MIB object shows the instability defect flag.
STR cienaCesCfmServiceLastFaultCCM	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.12	CfmDisplayString	read-only	This MIB object shows the last received CCM fault.
INT cienaCesCfmServiceLMMInterval	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.23	INTEGER	read-only	This MIB object indicates the LMM transmission interval index for the service specified by cienaCesCfmServiceType. This determines the frequency at which LMMs are transmitted. The length of the interval increases exponentially with the index value. The value ranges from 1 to 7. The values 1-7 represent indices to CFM intervals as follows: 1 --> 3.33ms, 2 --> 10ms, 3 --> 100ms, 4 --> 1sec, 5 --> 10sec, 6 --> 1min, 7 --> 10min.
INT cienaCesCfmServiceMdLevel	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.7	INTEGER	read-only	This MIB object indicates the maintenance domain level associated with the CFM service.
T/F cienaCesCfmServiceMulticastDa	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.37	TruthValue	read-only	This object indicates if multicast DA mode is enabled for the service. This object is relevant when the cienaCesCfmServiceType is PBT.
STR cienaCesCfmServiceName	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.6	DisplayString	read-only	This MIB object indicates the CFM service name.
U32 cienaCesCfmServiceNextMepId	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.19	Unsigned32	read-only	This MIB object indicates the next MEP ID for the given service.
C32 cienaCesCfmServiceNumActiveMEP	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.18	Counter32	read-only	This MIB object shows the number of active MEPs.
U32 cienaCesCfmServiceNumCCMForFault	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.21	Unsigned32	read-only	This MIB object indicates the number of CCM frames that must go undelivered for the PBB-TE tunnel before declaring the PBB-TE tunnel as operationally down. This object is only applicable if cienaCesCfmServiceType is set to pbtTunnel, else this object should be ignored.
C32 cienaCesCfmServiceNumMEP	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.16	Counter32	read-only	This MIB object shows the total number of MEPs.
C32 cienaCesCfmServiceNumRemoteMEP	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.17	Counter32	read-only	This MIB object shows the total number of remote MEPs.
CIE cienaCesCfmServiceOperState	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.5	CienaGlobalState	read-only	This object indicates the operational state of CFM for this service type.
T/F cienaCesCfmServicePortStatusFlag	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.30	TruthValue	read-only	This MIB object shows the port status defect flag.
T/F cienaCesCfmServiceRDIFlag	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.31	TruthValue	read-only	This MIB object shows the RDI defect flag.
INT cienaCesCfmServiceResetTime	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.11	INTEGER	read-only	This MIB object indicates the time interval during which no service faults can be detected before the service will reset a fault alarm.
T/F cienaCesCfmServiceRMEPAging	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.33	TruthValue	read-only	Controls automatic remote MEP aging for the service.
T/F cienaCesCfmServiceRMEPDiscovery	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.34	TruthValue	read-only	Controls automatic remote MEP discovery for the service.
T/F cienaCesCfmServiceRMEPFailureFlag	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.13	TruthValue	read-only	This MIB object indicates whether the RMEP failure flag is set.
U32 cienaCesCfmServiceRMEPHoldTime	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.28	Unsigned32	read-only	This MIB object indicates the remote MEP hold time in milliseconds.
cienaCesCfmServiceStats	1.3.6.1.4.1.1271.2.3.4.1.2
CIE cienaCesCfmServiceStatsClear	1.3.6.1.4.1.1271.2.3.4.1.2.1.1.15	CienaStatsClear	read-write	To clear statistics for a given service, set this object to clear(1). During GET this object returns none(0)
cienaCesCfmServiceStatsEntry	1.3.6.1.4.1.1271.2.3.4.1.2.1.1		not-accessible	An entry (conceptual row) in the CienaCesCfmServiceTable.
cienaCesCfmServiceStatsTable	1.3.6.1.4.1.1271.2.3.4.1.2.1		not-accessible	The (conceptual) table listing the statistics for a given CFM service.
C64 cienaCesCfmServiceStatsTotalRx	1.3.6.1.4.1.1271.2.3.4.1.2.1.1.2	Counter64	read-only	The total CFM frames received for the service.
C64 cienaCesCfmServiceStatsTotalRxContentMismatchLBR	1.3.6.1.4.1.1271.2.3.4.1.2.1.1.13	Counter64	read-only	The total number of content mismatched loopback replies received.
C64 cienaCesCfmServiceStatsTotalRxInorderLBR	1.3.6.1.4.1.1271.2.3.4.1.2.1.1.11	Counter64	read-only	The total number of in-order loopback replies received.
C64 cienaCesCfmServiceStatsTotalRxLBM	1.3.6.1.4.1.1271.2.3.4.1.2.1.1.10	Counter64	read-only	The total number of loopback messages received for the CFM service.
C64 cienaCesCfmServiceStatsTotalRxLTM	1.3.6.1.4.1.1271.2.3.4.1.2.1.1.5	Counter64	read-only	The total number of link trace messages received for the CFM service.
C64 cienaCesCfmServiceStatsTotalRxLTR	1.3.6.1.4.1.1271.2.3.4.1.2.1.1.6	Counter64	read-only	The total number of linktrace replies received for the CFM service.
C64 cienaCesCfmServiceStatsTotalRxOutOforderLBR	1.3.6.1.4.1.1271.2.3.4.1.2.1.1.12	Counter64	read-only	The total number of out-of-order loopback replies received.
C64 cienaCesCfmServiceStatsTotalRxUnexpectedLBR	1.3.6.1.4.1.1271.2.3.4.1.2.1.1.14	Counter64	read-only	The total number of unexpectecd loopback replies received.
C64 cienaCesCfmServiceStatsTotalRxUnexpectedLTR	1.3.6.1.4.1.1271.2.3.4.1.2.1.1.7	Counter64	read-only	The total number of unexpected linktrace replies received for the CFM service.
C64 cienaCesCfmServiceStatsTotalTx	1.3.6.1.4.1.1271.2.3.4.1.2.1.1.1	Counter64	read-only	The total CFM frames sent for the service.
C64 cienaCesCfmServiceStatsTotalTxLBM	1.3.6.1.4.1.1271.2.3.4.1.2.1.1.8	Counter64	read-only	The total number of loopback messages transmitted for the CFM service.
C64 cienaCesCfmServiceStatsTotalTxLBR	1.3.6.1.4.1.1271.2.3.4.1.2.1.1.9	Counter64	read-only	The total number of loopback replies transmitted for the CFM service.
C64 cienaCesCfmServiceStatsTotalTxLTM	1.3.6.1.4.1.1271.2.3.4.1.2.1.1.3	Counter64	read-only	The total number of linktrace messages transmitted for the CFM service.
C64 cienaCesCfmServiceStatsTotalTxLTR	1.3.6.1.4.1.1271.2.3.4.1.2.1.1.4	Counter64	read-only	The total number of linktrace replies transmitted for the CFM service.
cienaCesCfmServiceTable	1.3.6.1.4.1.1271.2.1.4.1.2.1		not-accessible	The (conceptual) table listing the configuration parameters for the CFM service table.
INT cienaCesCfmServiceTlvSenderIdType	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.27	INTEGER	read-only	This MIB object indicates the sender ID TLV Type.
INT cienaCesCfmServiceType	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.2	INTEGER	read-only	This object is used to specify the service type. The meaning of cienaCesCfmServiceValue depends on the value of this MIB object. This MIB object along with cienaCesCfmServiceValue must be unique for each entry in this table.
INT cienaCesCfmServiceValue	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.3	INTEGER	read-only	This object is used to specify the service value. The meaning of this object depends on the value of cienaCesCfmServiceType. This MIB object along with cienaCesCfmServiceType must be unique for each entry in this table.
STR cienaCesCfmServiceVsPbtName	1.3.6.1.4.1.1271.2.1.4.1.7.1.1.5	DisplayString	accessible-for-notify	This object indicates the virtual switch or PBB-TE tunnel assigned to the given service.
T/F cienaCesCfmServiceY1731	1.3.6.1.4.1.1271.2.1.4.1.2.1.1.26	TruthValue	read-only	This object indicates whether Y.1731 is enabled for the service.
INT cienaCesCfmSlotIndex	1.3.6.1.4.1.1271.2.1.4.1.9.1.1.1	INTEGER	not-accessible	This object indicates the slot number.
CIE cienaCesCfmState	1.3.6.1.4.1.1271.2.1.4.1.11.1	CienaGlobalState	read-only	This object indicates the globally configured CFM state.
cienaCesCfmStatisticsMIBObjects	1.3.6.1.4.1.1271.2.3.4
cienaCesCfmSyntheticLoss	1.3.6.1.4.1.1271.2.1.4.1.12
cienaCesCfmSyntheticLossResponderEntry	1.3.6.1.4.1.1271.2.1.4.1.12.2.1		not-accessible	An entry (conceptual row) in the cienaCesCfmSyntheticLossResponderTable.
MAC cienaCesCfmSyntheticLossResponderLocalMac	1.3.6.1.4.1.1271.2.1.4.1.12.2.1.6	MacAddress	read-only	This object identifies the MAC address of the local mep.
I32 cienaCesCfmSyntheticLossResponderLocalMEPId	1.3.6.1.4.1.1271.2.1.4.1.12.2.1.2	Integer32	not-accessible	This object specifies the local mep id of the SLM responder.
U32 cienaCesCfmSyntheticLossResponderNumSLMReceived	1.3.6.1.4.1.1271.2.1.4.1.12.2.1.8	Unsigned32	read-only	This object specifies the number of SLM frames received by this responder.
U32 cienaCesCfmSyntheticLossResponderNumSLRSent	1.3.6.1.4.1.1271.2.1.4.1.12.2.1.9	Unsigned32	read-only	This object specifies the number of SLR frames sent by this responder.
MAC cienaCesCfmSyntheticLossResponderRemoteMac	1.3.6.1.4.1.1271.2.1.4.1.12.2.1.7	MacAddress	read-only	This object identifies the MAC address of the remote mep.
I32 cienaCesCfmSyntheticLossResponderRemoteMEPId	1.3.6.1.4.1.1271.2.1.4.1.12.2.1.3	Integer32	not-accessible	This object specifies the remote mep id of the SLM responder.
U32 cienaCesCfmSyntheticLossResponderServiceIndex	1.3.6.1.4.1.1271.2.1.4.1.12.2.1.1	Unsigned32	not-accessible	This object specifies the service index of the SLM responder.
STR cienaCesCfmSyntheticLossResponderServiceName	1.3.6.1.4.1.1271.2.1.4.1.12.2.1.5	DisplayString	read-only	This object specifies the service name of the SLM responder.
cienaCesCfmSyntheticLossResponderTable	1.3.6.1.4.1.1271.2.1.4.1.12.2		not-accessible	The (conceptual) table lists the Synthetic Loss Measurement (SLM) responders.
U32 cienaCesCfmSyntheticLossResponderTestId	1.3.6.1.4.1.1271.2.1.4.1.12.2.1.4	Unsigned32	not-accessible	This object specifies the test ID of the SLM responder.
I32 cienaCesCfmSyntheticLossSessionAvgFrameLossFar	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.23	Integer32	read-only	This object specifies the average Far Loss Threshold of the test session.
I32 cienaCesCfmSyntheticLossSessionAvgFrameLossNear	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.20	Integer32	read-only	This object specifies the average Near Loss Threshold of the test session.
U32 cienaCesCfmSyntheticLossSessionCount	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.7	Unsigned32	read-only	This object specifies the number of SLM messages that will be transmitted during this session.
U32 cienaCesCfmSyntheticLossSessionDuration	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.13	Unsigned32	read-only	This object specifies the duration of time the test took in milliseconds to complete one iteration.
cienaCesCfmSyntheticLossSessionEntry	1.3.6.1.4.1.1271.2.1.4.1.12.1.1		not-accessible	An entry in the cienaCesCfmSyntheticLossSessionTable.
I32 cienaCesCfmSyntheticLossSessionFrameLossFar	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.19	Integer32	read-only	This object specifies the Far Loss Threshold in the latest test iteration.
I32 cienaCesCfmSyntheticLossSessionFrameLossNear	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.18	Integer32	read-only	This object specifies the Near Loss Threshold in the latest test iteration.
CFM cienaCesCfmSyntheticLossSessionFrameLossRatioFar	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.27	CfmFrameLossRatio	read-only	This object specifies the Frame Loss Ratio in percentile of loss at Farend in the last iteration of the completed test.
CFM cienaCesCfmSyntheticLossSessionFrameLossRatioNear	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.26	CfmFrameLossRatio	read-only	This object specifies the Frame Loss Ratio in percentile of loss at Nearend in the last iteration of the completed test.
U32 cienaCesCfmSyntheticLossSessionFrameSize	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.11	Unsigned32	read-only	This object specifies the size in bytes of the CFM base frame. If this object specifies zero there is no padding.
U32 cienaCesCfmSyntheticLossSessionIterations	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.9	Unsigned32	read-only	This object specifies the number of iterations the test has to be conducted. Each test iteration is defined by . Whereas, the test sessions is defined by test iterations over . If this object specifies zero, it means that test is continuous, and iterations are infinite.
I32 cienaCesCfmSyntheticLossSessionLocalMEPId	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.2	Integer32	not-accessible	This object specifies the local mep id of the SLM message.
I32 cienaCesCfmSyntheticLossSessionLossFarThreshold	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.15	Integer32	read-only	This object represents the Far Loss Threshold Fault for the Synthetic Loss Measurement test. A value of -1 disables the generation of faults. A value of 0 or greater is compared to the synthetic loss near result of the test and a fault is generated if the threshold is exceeded.
I32 cienaCesCfmSyntheticLossSessionLossNearThreshold	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.14	Integer32	read-only	This object represents the Near Loss Threshold Fault for the Synthetic Loss Measurement test. A value of -1 disables the generation of faults. A value of 0 or greater is compared to the synthetic loss near result of the test and a fault is generated if the threshold is exceeded.
I32 cienaCesCfmSyntheticLossSessionMaxFrameLossFar	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.25	Integer32	read-only	This object specifies the maximum Far Loss Threshold of the test session.
I32 cienaCesCfmSyntheticLossSessionMaxFrameLossNear	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.22	Integer32	read-only	This object specifies the maximum Near Loss Threshold of the test session.
I32 cienaCesCfmSyntheticLossSessionMinFrameLossFar	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.24	Integer32	read-only	This object specifies the minimum Far Loss Threshold of the test session.
I32 cienaCesCfmSyntheticLossSessionMinFrameLossNear	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.21	Integer32	read-only	This object specifies the minimum Near Loss Threshold of the test session.
U32 cienaCesCfmSyntheticLossSessionNumSLMSent	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.16	Unsigned32	read-only	This object specifies the number of SLM messages sent in the latest test iteration.
U32 cienaCesCfmSyntheticLossSessionNumSLRReceived	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.17	Unsigned32	read-only	This object specifies the number of SLR messages received in the latest test iteration.
U32 cienaCesCfmSyntheticLossSessionPriority	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.6	Unsigned32	read-only	This object specifies the priority that will be encoded in the SLM message.
U32 cienaCesCfmSyntheticLossSessionRepeatDelay	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.10	Unsigned32	read-only	This object specifies the delay in minutes between consecutive test iterations.
I32 cienaCesCfmSyntheticLossSessionSdClearThreshold	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.29	Integer32	read-only	This object represents the signal degrade clear threshold value for the synthetic loss measurement test. A value of 0 or greater is compared to the frame loss result and a fault is cleared, if loss is equal to or below this threshold. A value of -1 disables the generation of signal degrade fault notification This object works in conjunction with cienaCesCfmSyntheticLossSessionSdSetThreshold. If one object is given non-default value, other should be also set to non-default value.
I32 cienaCesCfmSyntheticLossSessionSdSetThreshold	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.28	Integer32	read-only	This object represents the signal degrade set threshold value for the synthetic loss measurement test. A value of 0 or greater is compared to the frame loss result and fault is set, if the loss exceeds this threshold. A value of -1 disables the generation of signal degrade fault notification. This object works in conjunction with cienaCesCfmSyntheticLossSessionSdClearThreshold. If one object is given non-default value, other should be also set to non-default value.
U32 cienaCesCfmSyntheticLossSessionServiceIndex	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.1	Unsigned32	not-accessible	This object specifies the service index of the SLM message.
STR cienaCesCfmSyntheticLossSessionServiceName	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.5	DisplayString	read-only	This object specifies the service name of the SLM message.
NTF cienaCesCfmSyntheticLossSessionSignalDegradeFaultTrapClear	1.3.6.1.4.1.1271.2.2.5.0.24			A notification is sent whenever the signal degrade fault is cleared during a Synthetic Loss Measurement test.
NTF cienaCesCfmSyntheticLossSessionSignalDegradeFaultTrapSet	1.3.6.1.4.1.1271.2.2.5.0.23			A notification is sent whenever the signal degrade fault is detected during a Synthetic Loss Measurement test.
U32 cienaCesCfmSyntheticLossSessionSLMInterval	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.8	Unsigned32	read-only	This object specifies the message interval at which SLMs will be transmitted. The values 3-7 represent indices to CFM intervals as follows: 3 --> 100ms, 4 --> 1sec, 5 --> 10sec, 6 --> 1min, 7 --> 10min.
cienaCesCfmSyntheticLossSessionTable	1.3.6.1.4.1.1271.2.1.4.1.12.1		not-accessible	The (conceptual) table listing the configuration parameters for the SyntheticLossMeasurement(SLM) message.
I32 cienaCesCfmSyntheticLossSessionTargetMEPId	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.3	Integer32	not-accessible	This object specifies the target mepid of the SLM message.
U32 cienaCesCfmSyntheticLossSessionTestId	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.4	Unsigned32	not-accessible	This object specifies the test ID of the SLM message.
U32 cienaCesCfmSyntheticLossSessionTimeout	1.3.6.1.4.1.1271.2.1.4.1.12.1.1.12	Unsigned32	read-only	This object specifies the timeout interval in milliseconds within which the source should receive a SLR for a corresponding SLM Msg.
ETH cienaCesCfmY1731EtherType	1.3.6.1.4.1.1271.2.1.4.1.11.4	EthType	read-only	This object indicates the optional alternate Ethertype for Y.1731 frames.
NTF cienaCesSyntheticLossSessionFarFaultClearTrap	1.3.6.1.4.1.1271.2.2.5.0.18			A notification is sent whenever the fault is cleared during a Synthetic Loss Measurement test with a far loss threshold fault.Setting the cienaCesCfmSyntheticLossFarFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable Bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmSyntheticLossSessionServiceName, cienaCesCfmSyntheticLossSessionFrameLossFar,cienaCesCfmSyntheticLossSessionLossFarThreshold
NTF cienaCesSyntheticLossSessionFarFaultTrap	1.3.6.1.4.1.1271.2.2.5.0.16			A notification is sent whenever the fault is detected during a Synthetic Loss Measurement test with a far loss threshold fault. Setting the cienaCesCfmSyntheticLossFarFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaCesCfmSyntheticLossSessionServiceName, cienaCesCfmSyntheticLossSessionFrameLossFar, cienaCesCfmSyntheticLossSessionLossFarThreshold.
NTF cienaCesSyntheticLossSessionNearFaultClearTrap	1.3.6.1.4.1.1271.2.2.5.0.17			A notification is sent whenever the fault is cleared during a Synthetic Loss Measurement test with a near loss threshold fault.Setting the cienaCesCfmSyntheticLossNearFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmSyntheticLossSessionServiceName, cienaCesCfmSyntheticLossSessionFrameLossNear, cienaCesCfmSyntheticLossSessionLossNearThreshold.
NTF cienaCesSyntheticLossSessionNearFaultTrap	1.3.6.1.4.1.1271.2.2.5.0.15			A notification is sent whenever the fault is detected during a Synthetic Loss Measurement test with a near loss threshold fault. Setting the cienaCesCfmSyntheticLossNearFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable bindings include : cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesCfmSyntheticLossSessionServiceName, cienaCesCfmSyntheticLossSessionFrameLossNear, cienaCesCfmSyntheticLossSessionLossNearThreshold.

RFC description

Ciena vendor-private MIB for CFM (Connectivity Fault Management) on Ciena CES (Carrier Ethernet Services) platforms.

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CIENA-CES-CFM-MIB

What Is CIENA-CES-CFM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description