All MIBs › CM-ENTITY-MIB › ethernetNTET1804CardRestartAction
ethernetNTET1804CardRestartAction
Module: CM-ENTITY-MIB
OID (symbolic): CM-ENTITY-MIB::ethernetNTET1804CardRestartAction
OID (numeric): 1.3.6.1.4.1.2544.1.12.3.1.38.1.8
Node type: OBJECT-TYPE
Type: RestartType
Access: read-write
Description:
Allows to perform specified action on the Ethernet NTE T1804 card.
What is ethernetNTET1804CardRestartAction?
This object allows an operator to command a restart action on an Ethernet NTE T1804 card, such as a warm reboot or factory reset. A system administrator uses this for remote card troubleshooting without physical access. This is a write-only control that forces the card to perform a specified restart operation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.3.1.38.1.8 snmpwalk -v2c -c public <target> CM-ENTITY-MIB::ethernetNTET1804CardRestartAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.3.1.38.1.8.1 snmpget -v2c -c public <target> CM-ENTITY-MIB::ethernetNTET1804CardRestartAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.3.1.38.1.8.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12.3 | cmEntityMIB | CM-ENTITY-MIB |
| 1.3.6.1.4.1.2544.1.12.3.1 | cmEntityObjects | CM-ENTITY-MIB |
| 1.3.6.1.4.1.2544.1.12.3.1.38 | ethernetNTET1804CardTable | CM-ENTITY-MIB |
| 1.3.6.1.4.1.2544.1.12.3.1.38.1 | ethernetNTET1804CardEntry | CM-ENTITY-MIB |
| 1.3.6.1.4.1.2544.1.12.3.1.38.1.8 | ethernetNTET1804CardRestartAction | CM-ENTITY-MIB |