CM-ENTITY-MIB :: pseudoWireOcnStmCardForceOffLineAction

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCM-ENTITY-MIBpseudoWireOcnStmCardForceOffLineAction

pseudoWireOcnStmCardForceOffLineAction

Module: CM-ENTITY-MIB

OID (symbolic): CM-ENTITY-MIB::pseudoWireOcnStmCardForceOffLineAction

OID (numeric): 1.3.6.1.4.1.2544.1.12.3.1.34.1.15

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.

What is pseudoWireOcnStmCardForceOffLineAction?

This OID stores a true/false setting that forces a circuit card in the equipment to stop accepting new traffic by holding its reset signal active, removing it from service without a full power-off. When you enable this, the card stops immediately without causing a reboot, allowing maintenance without disrupting other cards. A network operator would use this during hardware maintenance to safely isolate a failing card from the system while keeping the rest of the equipment running.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.3.1.34.1.15
snmpwalk -v2c -c public <target> CM-ENTITY-MIB::pseudoWireOcnStmCardForceOffLineAction

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.3.1.34.1.15.1
snmpget -v2c -c public <target> CM-ENTITY-MIB::pseudoWireOcnStmCardForceOffLineAction.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.3.1.34.1.15.1 s <value>

Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-ENTITY-MIB::pseudoWireOcnStmCardForceOffLineAction OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2544advaMIBADVA-MIB
1.3.6.1.4.1.2544.1productsADVA-MIB
1.3.6.1.4.1.2544.1.12fsp150cmADVA-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2544.1.12.3cmEntityMIBCM-ENTITY-MIB
1.3.6.1.4.1.2544.1.12.3.1cmEntityObjectsCM-ENTITY-MIB
1.3.6.1.4.1.2544.1.12.3.1.34pseudoWireOcnStmCardTableCM-ENTITY-MIB
1.3.6.1.4.1.2544.1.12.3.1.34.1pseudoWireOcnStmCardEntryCM-ENTITY-MIB
1.3.6.1.4.1.2544.1.12.3.1.34.1.15pseudoWireOcnStmCardForceOffLineActionCM-ENTITY-MIB