CM-ENTITY-MIB :: ethernetNTEGE114ProVmHCardSwitchPortAction

MIB Reference — IPNetwork Monitor

All MIBsCM-ENTITY-MIBethernetNTEGE114ProVmHCardSwitchPortAction

ethernetNTEGE114ProVmHCardSwitchPortAction

Module: CM-ENTITY-MIB

OID (symbolic): CM-ENTITY-MIB::ethernetNTEGE114ProVmHCardSwitchPortAction

OID (numeric): 1.3.6.1.4.1.2544.1.12.3.1.67.1.11

Node type: OBJECT-TYPE

Type: SwitchPortAction

Access: read-write

Description:

Allows to perform specified action on the Ethernet NTE GE114ProVmH card.

What is ethernetNTEGE114ProVmHCardSwitchPortAction?

This is a control command for an Ethernet card in telecom equipment to perform administrative actions on its ports. It lets operators remotely reset, enable, or disable specific ports without physical access. A NOC tech would use this to restart a problematic port that's dropping connections.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.3.1.67.1.11
snmpwalk -v2c -c public <target> CM-ENTITY-MIB::ethernetNTEGE114ProVmHCardSwitchPortAction

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.3.1.67.1.11.1
snmpget -v2c -c public <target> CM-ENTITY-MIB::ethernetNTEGE114ProVmHCardSwitchPortAction.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.3.1.67.1.11.1 s <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.2544advaMIBADVA-MIB
1.3.6.1.4.1.2544.1productsADVA-MIB
1.3.6.1.4.1.2544.1.12fsp150cmADVA-MIB
1.3.6.1.4.1.2544.1.12.3cmEntityMIBCM-ENTITY-MIB
1.3.6.1.4.1.2544.1.12.3.1cmEntityObjectsCM-ENTITY-MIB
1.3.6.1.4.1.2544.1.12.3.1.67ethernetNTEGE114ProVmHCardTableCM-ENTITY-MIB
1.3.6.1.4.1.2544.1.12.3.1.67.1ethernetNTEGE114ProVmHCardEntryCM-ENTITY-MIB
1.3.6.1.4.1.2544.1.12.3.1.67.1.11ethernetNTEGE114ProVmHCardSwitchPortActionCM-ENTITY-MIB