CM-ENTITY-MIB :: ethernetNTEGE114SHCardSwitchPortAction

MIB Reference — IPNetwork Monitor

All MIBsCM-ENTITY-MIBethernetNTEGE114SHCardSwitchPortAction

ethernetNTEGE114SHCardSwitchPortAction

Module: CM-ENTITY-MIB

OID (symbolic): CM-ENTITY-MIB::ethernetNTEGE114SHCardSwitchPortAction

OID (numeric): 1.3.6.1.4.1.2544.1.12.3.1.45.1.11

Node type: OBJECT-TYPE

Type: SwitchPortAction

Access: read-write

Description:

Allows to perform specified action on the Ethernet NTE GE114SH card.

What is ethernetNTEGE114SHCardSwitchPortAction?

This object allows administrators to send a command to perform a specific action on an Ethernet NTE GE114SH card's switch port (such as enable, disable, or reset). Technicians use this for remote port management on carrier-grade Ethernet cards without physical access. The action specified here controls the card's switchport behavior immediately upon setting.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.3.1.45.1.11
snmpwalk -v2c -c public <target> CM-ENTITY-MIB::ethernetNTEGE114SHCardSwitchPortAction

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.3.1.45.1.11.1
snmpget -v2c -c public <target> CM-ENTITY-MIB::ethernetNTEGE114SHCardSwitchPortAction.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.3.1.45.1.11.1 s <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.2544advaMIBADVA-MIB
1.3.6.1.4.1.2544.1productsADVA-MIB
1.3.6.1.4.1.2544.1.12fsp150cmADVA-MIB
1.3.6.1.4.1.2544.1.12.3cmEntityMIBCM-ENTITY-MIB
1.3.6.1.4.1.2544.1.12.3.1cmEntityObjectsCM-ENTITY-MIB
1.3.6.1.4.1.2544.1.12.3.1.45ethernetNTEGE114SHCardTableCM-ENTITY-MIB
1.3.6.1.4.1.2544.1.12.3.1.45.1ethernetNTEGE114SHCardEntryCM-ENTITY-MIB
1.3.6.1.4.1.2544.1.12.3.1.45.1.11ethernetNTEGE114SHCardSwitchPortActionCM-ENTITY-MIB