CM-ENTITY-MIB :: ethernetNTEGO102ProSMCardSnmpDyingGaspEnabled

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCM-ENTITY-MIBethernetNTEGO102ProSMCardSnmpDyingGaspEnabled

ethernetNTEGO102ProSMCardSnmpDyingGaspEnabled

Module: CM-ENTITY-MIB

OID (symbolic): CM-ENTITY-MIB::ethernetNTEGO102ProSMCardSnmpDyingGaspEnabled

OID (numeric): 1.3.6.1.4.1.2544.1.12.3.1.92.1.7

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: Whether or not SNMP dying gasp is enabled on the Ethernet NTE GO102Pro-SM Card.

What is ethernetNTEGO102ProSMCardSnmpDyingGaspEnabled?

This read-write TruthValue turns the SNMP dying-gasp feature on or off for the Ethernet NTE GO102Pro-SM Card, controlling whether the card sends a last-gasp notification trap when it loses power. It matters because, when enabled, the Ethernet NTE GO102Pro-SM Card can alert the management system to an imminent power loss using the residual energy left in its capacitors, giving a few extra seconds of warning that a plain poll-based check would miss. For example, an operator enables this object on the Ethernet NTE GO102Pro-SM Card at a remote unmanned site so a sudden power failure there still generates an immediate trap instead of just going silent until the next poll times out.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.3.1.92.1.7
snmpwalk -v2c -c public <target> CM-ENTITY-MIB::ethernetNTEGO102ProSMCardSnmpDyingGaspEnabled

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.3.1.92.1.7.1
snmpget -v2c -c public <target> CM-ENTITY-MIB::ethernetNTEGO102ProSMCardSnmpDyingGaspEnabled.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.3.1.92.1.7.1 s <value>

Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-ENTITY-MIB::ethernetNTEGO102ProSMCardSnmpDyingGaspEnabled OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2544advaMIBADVA-MIB
1.3.6.1.4.1.2544.1productsADVA-MIB
1.3.6.1.4.1.2544.1.12fsp150cmADVA-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2544.1.12.3cmEntityMIBCM-ENTITY-MIB
1.3.6.1.4.1.2544.1.12.3.1cmEntityObjectsCM-ENTITY-MIB
1.3.6.1.4.1.2544.1.12.3.1.92ethernetNTEGO102ProSMCardTableCM-ENTITY-MIB
1.3.6.1.4.1.2544.1.12.3.1.92.1ethernetNTEGO102ProSMCardEntryCM-ENTITY-MIB
1.3.6.1.4.1.2544.1.12.3.1.92.1.7ethernetNTEGO102ProSMCardSnmpDyingGaspEnabledCM-ENTITY-MIB