All MIBs › CM-ENTITY-MIB › stuHighPerCardForceOffLineAction
stuHighPerCardForceOffLineAction
Module: CM-ENTITY-MIB
OID (symbolic): CM-ENTITY-MIB::stuHighPerCardForceOffLineAction
OID (numeric): 1.3.6.1.4.1.2544.1.12.3.1.47.1.9
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is released.
What is stuHighPerCardForceOffLineAction?
This read-write TruthValue object forces the Stu High Performance Card out of service by holding its hardware reset signal via AMI when set to true, and releases that reset when set back to false. Admins use this when a Stu High Performance Card needs to be taken fully out of service — for a physical swap or a safety condition — since holding the reset line keeps the card from operating even though it hasn't been physically removed. Before pulling a Stu High Performance Card for replacement, a technician would first set this object to true to hold its reset signal, then set it back to false once the replacement card is seated and ready to boot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.3.1.47.1.9 snmpwalk -v2c -c public <target> CM-ENTITY-MIB::stuHighPerCardForceOffLineAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.3.1.47.1.9.1 snmpget -v2c -c public <target> CM-ENTITY-MIB::stuHighPerCardForceOffLineAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.3.1.47.1.9.1 s <value>
Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CM-ENTITY-MIB::stuHighPerCardForceOffLineAction OID value, configure state conditions and alerts, and monitor any ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2544.1.12.3 | cmEntityMIB | CM-ENTITY-MIB |
| 1.3.6.1.4.1.2544.1.12.3.1 | cmEntityObjects | CM-ENTITY-MIB |
| 1.3.6.1.4.1.2544.1.12.3.1.47 | stuHighPerCardTable | CM-ENTITY-MIB |
| 1.3.6.1.4.1.2544.1.12.3.1.47.1 | stuHighPerCardEntry | CM-ENTITY-MIB |
| 1.3.6.1.4.1.2544.1.12.3.1.47.1.9 | stuHighPerCardForceOffLineAction | CM-ENTITY-MIB |