COMPEX-IN3000

All MIBs › COMPEX-IN3000

Category: Device Management

Description: MIB for Compex IN3000 series network devices covering interface management, routing, and device configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is COMPEX-IN3000?

COMPEX-IN3000 is a Compex Systems proprietary MIB (enterprise OID 426) for the IN3000 device platform, exposing product identity information (name, version, release date), vendor contact details (address, phone), and a development-team table. As a lightweight inventory MIB it lets an administrator confirm product name/version and access basic vendor-support contact information directly through SNMP. It is deployed on Compex IN3000 devices. Engineers can download the COMPEX-IN3000 file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in COMPEX-IN3000. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Compex Systems IN3000 devices

Monitoring Examples

An administrator polls productVersion on a Compex IN3000 unit to confirm its firmware revision when auditing a fleet of these devices for a known issue affecting only certain versions.

What Can Be Monitored

product name/version and vendor contact information

Imported Objects

From RFC1155-SMI

TimeTicks
enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
compex	1.3.6.1.4.1.426
in3000	1.3.6.1.4.1.426.1
NTF partState	1.3.6.1.4.1.426.1.0.1			This trap is sent whenever the partition state changes to partitioned.
NTF notPartState	1.3.6.1.4.1.426.1.0.2			This trap is sent whenever the partition state changes to not partitioned.
hubTypes	1.3.6.1.4.1.426.1.1
tp3000	1.3.6.1.4.1.426.1.1.1
rp3000	1.3.6.1.4.1.426.1.1.2
productInfo	1.3.6.1.4.1.426.1.2
STR productName	1.3.6.1.4.1.426.1.2.1	DisplayString	read-only	The textual description of the IN3000.
STR productVersion	1.3.6.1.4.1.426.1.2.2	DisplayString	read-only	The version of the IN3000 Firmware.
STR releasedDate	1.3.6.1.4.1.426.1.2.3	DisplayString	read-only	The release date of this version.
STR compexAddress	1.3.6.1.4.1.426.1.2.4	DisplayString	read-only	Address of Compex, Inc.
STR compexPhone	1.3.6.1.4.1.426.1.2.5	DisplayString	read-only	Compex's phone number for technical support or sales information.
OCT compexImage	1.3.6.1.4.1.426.1.2.6	OCTET STRING	read-only	Information on the system setup. This string is not in a human readable form.
INT compexMyAccess	1.3.6.1.4.1.426.1.2.7	INTEGER	read-only	This tells you the access you have with the community string you are using.
devTeamTable	1.3.6.1.4.1.426.1.2.8		not-accessible	This is a list of the Compex development team.
devTeamEntry	1.3.6.1.4.1.426.1.2.8.1		not-accessible	Information about a particular person. The index is the cpId of the person.
INT cpId	1.3.6.1.4.1.426.1.2.8.1.1	INTEGER	read-only	This is the development team member's unique identifier number.
STR cpName	1.3.6.1.4.1.426.1.2.8.1.2	DisplayString	read-only	This is the development team member's name.
communityInfo	1.3.6.1.4.1.426.1.3
communityTable	1.3.6.1.4.1.426.1.3.1		not-accessible	A table containing community string information.
communityEntry	1.3.6.1.4.1.426.1.3.1.1		not-accessible	Information about a particular community string. The instance of the table entries is the communityInstance.
INT communityInstance	1.3.6.1.4.1.426.1.3.1.1.1	INTEGER	read-only	The table instance. This is the row number of a particular community string in the table.
STR communityString	1.3.6.1.4.1.426.1.3.1.1.2	DisplayString	read-write	The community string. This is defined in RFC 1157. The community string may be up to 10 characters in length.
INT communityCapability	1.3.6.1.4.1.426.1.3.1.1.3	INTEGER	read-write	The capability of the community string. The community string may be valid for different SNMP operations. Setting this object to 'clear' will cause the entry to be cleared out.
trapInfo	1.3.6.1.4.1.426.1.4
trapTable	1.3.6.1.4.1.426.1.4.1		not-accessible	A table containing trap receiver information.
trapEntry	1.3.6.1.4.1.426.1.4.1.1		not-accessible	Information about a particular trap receiver. The instance for this table is the trapDest, or the IP address of the trap receiver. This table may have up to ten entries.
IP trapDest	1.3.6.1.4.1.426.1.4.1.1.1	IpAddress	read-write	The trap destination. This is defined in RFC 1157. The trap received should be the IP address of an SNMP based network management system.
INT trapStatus	1.3.6.1.4.1.426.1.4.1.1.2	INTEGER	read-write	The trap status. This MIB variable is used to delete a trap receiver from the trap table.
in3000StatsRptr	1.3.6.1.4.1.426.1.5
CTR rptrFifoColls	1.3.6.1.4.1.426.1.5.1	Counter	read-only	The total number of Collision Designators put into the IN3000's FIFO.
CTR rptrShortWoPort	1.3.6.1.4.1.426.1.5.2	Counter	read-only	The total number of short fragment put into the IN3000's FIFO without a port designator.
CTR rptrNoStatsDsgntr	1.3.6.1.4.1.426.1.5.3	Counter	read-only	The total number of empty statistic designators put into the IN3000's FIFO.
CTR rptrInvalidDesgntr	1.3.6.1.4.1.426.1.5.4	Counter	read-only	The total number of entries put into the IN3000's FIFO that had invalid designators.
CTR rptrPortIDwoPacket	1.3.6.1.4.1.426.1.5.5	Counter	read-only	The total number of entries in the IN3000's FIFO which do not have a corresponding packet in the ethernet controller's RAM buffer.
CTR rptrOverflows	1.3.6.1.4.1.426.1.5.6	Counter	read-only	The total number of times the IN3000's FIFO has overflowed.
CTR rptrNoFreeBuffers	1.3.6.1.4.1.426.1.5.7	Counter	read-only	The number of packets received that had to be discarded due to lack of buffers.
CTR rptrTxTimeouts	1.3.6.1.4.1.426.1.5.8	Counter	read-only	The total number of times a packet could not be sent before the transmit timer expired.
CTR rptrNICTxCollisions	1.3.6.1.4.1.426.1.5.9	Counter	read-only	The total number of collision that occured while the ethernet controller attempted to transmit. This error is reported by the ethernet controller.
CTR rptrNICTxFifoUruns	1.3.6.1.4.1.426.1.5.10	Counter	read-only	The total number of times the ethernet controller could not gain access to the ethernet before the ethernet controller's FIFO emptied.
CTR rptrNICTxCDHrtbts	1.3.6.1.4.1.426.1.5.11	Counter	read-only	The number of times the ethernet controlled was unable to transmit a collision signal after transmission of a packet.
CTR rptrNICTxOutWinCls	1.3.6.1.4.1.426.1.5.12	Counter	read-only	The total number of collisions seen by the ethernet controller that occured after the slot time.
CTR rptrNICCarrierLost	1.3.6.1.4.1.426.1.5.13	Counter	read-only	The total number of times a carrier lost was detected by the ethernet controlled during the transmission of a packet.
CTR rptrInNoRxBuf	1.3.6.1.4.1.426.1.5.14	Counter	read-only	The total number of times a packet was discarded due to lack of receive buffers.
in3000StatsGroup	1.3.6.1.4.1.426.1.6
groupOctetsTable	1.3.6.1.4.1.426.1.6.1		not-accessible	This table contains Repeater Group Level octets Statistics.
groupOctetsEntry	1.3.6.1.4.1.426.1.6.1.1		not-accessible	Each row of this table is associated to a TP3000 or RP3000. Note the the groups are numbered from 1 to 4.
INT gsoGroupIndex	1.3.6.1.4.1.426.1.6.1.1.1	INTEGER	read-only	A unique value to the group. The groups are numbered from 1 to 4. The addresses set via the dip switches on the TP3000 and RP3000 are numbered 0 to 3. In order to calculate the group number add one (1) to the address set via the TP3000 or RP3000 dip switches.
CTR gsoHostOctetsRxOk	1.3.6.1.4.1.426.1.6.1.1.2	Counter	read-only	The total number of octets received by all ports in the group that were from valid packets and were addressed to the IN3000.
CTR gsoHostOctetsRxErr	1.3.6.1.4.1.426.1.6.1.1.3	Counter	read-only	The total number of octets received by all ports in the group that were from packets with errors and were addressed to the IN3000.
CTR gsoOctetsRxOk	1.3.6.1.4.1.426.1.6.1.1.4	Counter	read-only	The total number of octets received by all ports in the group that were from valid packets and were no addressed to the IN3000.
CTR gsoOctetsRxErr	1.3.6.1.4.1.426.1.6.1.1.5	Counter	read-only	The total number of octets received by all ports in the group that were from packets with errors and were not addressed to the IN3000.
CTR gsobkt64Ok	1.3.6.1.4.1.426.1.6.1.1.6	Counter	read-only	The total number of packets received from all ports in the group that were 64 bytes in length (including FCS octets and excluding framing bits) and did not contain errors.
CTR gsobkt64Err	1.3.6.1.4.1.426.1.6.1.1.7	Counter	read-only	The total number of packets received from all ports in the group that were 64 bytes in length (including FCS octets and excluding framing bits) and contained errors.
CTR gsobkt65to127Ok	1.3.6.1.4.1.426.1.6.1.1.8	Counter	read-only	The total number of packets received from all ports in the group that were between 65 bytes and 127 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.
CTR gsobkt65to127Err	1.3.6.1.4.1.426.1.6.1.1.9	Counter	read-only	The total number of packets received from all ports in the group that were between 65 bytes and 127 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.
CTR gsobkt128to255Ok	1.3.6.1.4.1.426.1.6.1.1.10	Counter	read-only	The total number of packets received from all ports in the group that were between 128 bytes and 255 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.
CTR gsobkt128to255Err	1.3.6.1.4.1.426.1.6.1.1.11	Counter	read-only	The total number of packets received from all ports in the group that were between 128 bytes and 255 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.
CTR gsobkt256to511Ok	1.3.6.1.4.1.426.1.6.1.1.12	Counter	read-only	The total number of packets received from all ports in the group that were between 256 bytes and 511 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.
CTR gsobkt256to511Err	1.3.6.1.4.1.426.1.6.1.1.13	Counter	read-only	The total number of packets received from all ports in the group that were between 256 bytes and 511 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.
CTR gsobkt512to1023Ok	1.3.6.1.4.1.426.1.6.1.1.14	Counter	read-only	The total number of packets received from all ports in the group that were between 512 bytes and 1023 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.
CTR gsobkt512to1023Err	1.3.6.1.4.1.426.1.6.1.1.15	Counter	read-only	The total number of packets received from all ports in the group that were between 512 bytes and 1023 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.
CTR gsobkt1024to1518Ok	1.3.6.1.4.1.426.1.6.1.1.16	Counter	read-only	The total number of packets received from all ports in the group that were between 1024 bytes and 1518 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.
CTR gsobkt1024to1518Err	1.3.6.1.4.1.426.1.6.1.1.17	Counter	read-only	The total number of packets received from all ports in the group that were between 1024 bytes and 1518 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.
CTR gsoRuntPacketsOk	1.3.6.1.4.1.426.1.6.1.1.18	Counter	read-only	The total number of packets received from all ports in the group that were less than 64 bytes, and did not contain any other errors.
CTR gsoRuntPacketsErr	1.3.6.1.4.1.426.1.6.1.1.19	Counter	read-only	The total number of packets reveived from all ports in the group that were less than 64 bytes and contained errors.
CTR gsoPacketsTooBigOk	1.3.6.1.4.1.426.1.6.1.1.20	Counter	read-only	The total number of packets reveived from all ports in the group that were larger than 1518 bytes, and did not contain any other errors.
CTR gsoPacketsTooBigErr	1.3.6.1.4.1.426.1.6.1.1.21	Counter	read-only	The total number of packets reveived from all ports in the group that were larger than 1518 bytes, and contained other errors.
groupPacketTable	1.3.6.1.4.1.426.1.6.2		not-accessible	This table contains Repeater Group Level Packet Statistics.
groupPacketEntry	1.3.6.1.4.1.426.1.6.2.1		not-accessible	Each row of this table is associated to a TP3000 or RP3000. Note the the groups are numbered from 1 to 4.
INT gspGroupIndex	1.3.6.1.4.1.426.1.6.2.1.1	INTEGER	read-only	A unique value to the group. The groups are numbered from 1 to 4. The addresses set via the dip switches on the TP3000 and RP3000 are numbered 0 to 3. In order to calculate the group number add one (1) to the address set via the dip switches.
CTR gspPacketsRxOk	1.3.6.1.4.1.426.1.6.2.1.2	Counter	read-only	The total number of packet received by all ports in the group that were valid packets.
CTR gspPacketsRxErr	1.3.6.1.4.1.426.1.6.2.1.3	Counter	read-only	The total number of packet received by all ports in the group that were packets with errors.
CTR gspPhysicalOk	1.3.6.1.4.1.426.1.6.2.1.4	Counter	read-only	The total number of packets received from all ports in the group that were unicast packets and were valid packets.
CTR gspPhysicalErr	1.3.6.1.4.1.426.1.6.2.1.5	Counter	read-only	The total number of packets received from all ports in the group that were unicast packets and were packets with errors.
CTR gspMulticastOk	1.3.6.1.4.1.426.1.6.2.1.6	Counter	read-only	The total number of packets received from all ports in the group that were multicast packets and were valid packets.
CTR gspMulticastErr	1.3.6.1.4.1.426.1.6.2.1.7	Counter	read-only	The total number of packets received from all ports in the group that were multicast packets and were packets with errors.
CTR gspBroadcastOk	1.3.6.1.4.1.426.1.6.2.1.8	Counter	read-only	The total number of packets received from all ports in the group that were broadcast packets and were valid packets.
CTR gspBroadcastErr	1.3.6.1.4.1.426.1.6.2.1.9	Counter	read-only	The total number of packets received from all ports in the group that were broadcast packets and were packets with errors.
CTR gspHostPhysicalOk	1.3.6.1.4.1.426.1.6.2.1.10	Counter	read-only	The total number of packets received from all ports in the group that were unicast packets, addressed to the IN3000 and did not have errors.
CTR gspHostPhysicalErr	1.3.6.1.4.1.426.1.6.2.1.11	Counter	read-only	The total number of packets received from all ports in the group that were unicast packets, addressed to the IN3000 and had errors.
groupMiscTable	1.3.6.1.4.1.426.1.6.3		not-accessible	This table contains Repeater Group Level Statistics.
groupMiscEntry	1.3.6.1.4.1.426.1.6.3.1		not-accessible	Each row of this table is associated to a TP3000 or RP3000. Note the the groups are numbered from 1 to 4.
INT gsmGroupIndex	1.3.6.1.4.1.426.1.6.3.1.1	INTEGER	read-only	A unique value to the group. The groups are numbered from 1 to 4. The addresses set via the dip switches on the TP3000 and RP3000 are numbered 0 to 3. In order to calculate the group number add one (1) to the address set via the dip switches.
INT gsmNumPorts	1.3.6.1.4.1.426.1.6.3.1.2	INTEGER	read-only	The total number of ports contained in the group.
STR gsmName	1.3.6.1.4.1.426.1.6.3.1.3	DisplayString	read-write	The name of the group.
INT gsmType	1.3.6.1.4.1.426.1.6.3.1.4	INTEGER	read-only	The microhub type.
GAU gsmNumLinkUp	1.3.6.1.4.1.426.1.6.3.1.5	Gauge	read-only	The total number of ports in the group that have link status.
GAU gsmNumLinkPulses	1.3.6.1.4.1.426.1.6.3.1.6	Gauge	read-only	The total number of ports in the group that have link pulses enabled.
CTR gsmCollisions	1.3.6.1.4.1.426.1.6.3.1.7	Counter	read-only	The total number of collisions detected by all ports in the group.
CTR gsmLateCollisions	1.3.6.1.4.1.426.1.6.3.1.8	Counter	read-only	The total number of late collisions detected by all ports in the group.
CTR gsmPartitions	1.3.6.1.4.1.426.1.6.3.1.9	Counter	read-only	The total number of partitions from all ports in the group.
CTR gsmJabbers	1.3.6.1.4.1.426.1.6.3.1.10	Counter	read-only	The total number of frames from all port in the group that were longer than 1518 bytes, and had a non integral number of bytes or a bad frame check sequence (FCS).
CTR gsmShortFragments	1.3.6.1.4.1.426.1.6.3.1.11	Counter	read-only	Total number of packets from all ports in the group that were less than 64 bytes, and had a non-integral number of octets or had a bad frame check sequence (FCS).
CTR gsmCrcFae	1.3.6.1.4.1.426.1.6.3.1.12	Counter	read-only	The total number of packets reveived from all ports in the group that had frame alignment errors. Since there was a frame alignment error the packet also had a bad CRC.
CTR gsmCrc	1.3.6.1.4.1.426.1.6.3.1.13	Counter	read-only	The total number of packets received from all ports in the group that did not have a frame alignment error, but they had a bad CRC.
CTR gsmFifoOverrun	1.3.6.1.4.1.426.1.6.3.1.14	Counter	read-only	The total number of packets reveived from all port in the group that caused the ethernet controlled to overrun its FIFO.
CTR gsmDeferring	1.3.6.1.4.1.426.1.6.3.1.15	Counter	read-only	The total number of packets from all ports in the group that caused the ethernet controller to detect a jabber.
in3000StatsPort	1.3.6.1.4.1.426.1.7
portOctetsTable	1.3.6.1.4.1.426.1.7.1		not-accessible	This table contains octet statistics that deal with the TP3000 and RP3000 ports.
portOctetsEntry	1.3.6.1.4.1.426.1.7.1.1		not-accessible	Each row in this table is associated with a port in a TP3000 or RP3000. Note that groups are numbered 1 to 4 and ports are numbered 1 to 7. The row instance is made up of the group number and the port number.
INT psoGroupIndex	1.3.6.1.4.1.426.1.7.1.1.1	INTEGER	read-only	The group that this port resides in. The groups are numbered 1 to 4.
INT psoPortIndex	1.3.6.1.4.1.426.1.7.1.1.2	INTEGER	read-only	The port number of this port. Note that the ports are numbered 1 to 7. For the TP3000 the twisted pair ports are numbered 1 to 6 and the remaining ethernet port (either 10base2 or AUI) is port 7.
CTR psoHostOctetsRxOk	1.3.6.1.4.1.426.1.7.1.1.3	Counter	read-only	The total number of octets received on this port that were from packets without errors and were addressed to the IN3000.
CTR psoHostOctetsRxErr	1.3.6.1.4.1.426.1.7.1.1.4	Counter	read-only	The total number of octets received on this port that were from packets with errors and were addressed to the IN3000.
CTR psoOctetsRxOk	1.3.6.1.4.1.426.1.7.1.1.5	Counter	read-only	The total number of octets received on this port that were from packets without errors.
CTR psoOctetsRxErr	1.3.6.1.4.1.426.1.7.1.1.6	Counter	read-only	The total number of octets received on this port that were from packets with errors.
CTR psobkt64Ok	1.3.6.1.4.1.426.1.7.1.1.7	Counter	read-only	The total number of packets receive by this port that were 64 bytes in length (including FCS octets and excluding framing bits) and did not contain errors.
CTR psobkt64Err	1.3.6.1.4.1.426.1.7.1.1.8	Counter	read-only	The total number of packets receive by this port that were 64 bytes in length (including FCS octets and excluding framing bits) and contained errors.
CTR psobkt65to127Ok	1.3.6.1.4.1.426.1.7.1.1.9	Counter	read-only	The total number of packets receive by this port that were between 65 and 127 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.
CTR psobkt65to127Err	1.3.6.1.4.1.426.1.7.1.1.10	Counter	read-only	The total number of packets receive by this port that were between 65 and 127 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.
CTR psobkt128to255Ok	1.3.6.1.4.1.426.1.7.1.1.11	Counter	read-only	The total number of packets receive by this port that were between 128 and 255 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.
CTR psobkt128to255Err	1.3.6.1.4.1.426.1.7.1.1.12	Counter	read-only	The total number of packets receive by this port that were between 128 and 255 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.
CTR psobkt256to511Ok	1.3.6.1.4.1.426.1.7.1.1.13	Counter	read-only	The total number of packets receive by this port that were between 256 and 511 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.
CTR psobkt256to511Err	1.3.6.1.4.1.426.1.7.1.1.14	Counter	read-only	The total number of packets receive by this port that were between 256 and 511 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.
CTR psobkt512to1023Ok	1.3.6.1.4.1.426.1.7.1.1.15	Counter	read-only	The total number of packets receive by this port that were between 512 and 1023 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.
CTR psobkt512to1023Err	1.3.6.1.4.1.426.1.7.1.1.16	Counter	read-only	The total number of packets receive by this port that were between 512 and 1023 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.
CTR psobkt1024to1518Ok	1.3.6.1.4.1.426.1.7.1.1.17	Counter	read-only	The total number of packets receive by this port that were between 1024 and 1518 bytes in length inclusive (including FCS octets and excluding framing bits) and did not contain errors.
CTR psobkt1024to1518Err	1.3.6.1.4.1.426.1.7.1.1.18	Counter	read-only	The total number of packets receive by this port that were between 1024 and 1518 bytes in length inclusive (including FCS octets and excluding framing bits) and contained errors.
CTR psoRuntPacketsOk	1.3.6.1.4.1.426.1.7.1.1.19	Counter	read-only	The total number of packets received by this port that were less than 64 bytes, but contained no other errors.
CTR psoRuntPacketsErr	1.3.6.1.4.1.426.1.7.1.1.20	Counter	read-only	The total number of packets received by this port that were less than 64 bytes, and contained other errors.
CTR psoPacketsTooBigOk	1.3.6.1.4.1.426.1.7.1.1.21	Counter	read-only	The total number of packets received by this port that were greater than 1518 bytes, but contained no other errors.
CTR psoPacketsTooBigErr	1.3.6.1.4.1.426.1.7.1.1.22	Counter	read-only	The total number of packets received by this port that were greater than 1518 bytes, and contained other errors.
portPacketTable	1.3.6.1.4.1.426.1.7.2		not-accessible	This table contains statistics that deal with the TP3000 and RP3000 ports.
portPacketEntry	1.3.6.1.4.1.426.1.7.2.1		not-accessible	Each row in this table is associated with a port in a TP3000 or RP3000. Note that groups are numbered 1 to 4 and ports are numbered 1 to 7. The row instance is made up of the group number and the port number.
INT pspGroupIndex	1.3.6.1.4.1.426.1.7.2.1.1	INTEGER	read-only	The group that this port resides in. The groups are numbered 1 to 4.
INT pspPortIndex	1.3.6.1.4.1.426.1.7.2.1.2	INTEGER	read-only	The port number of this port. Note that the ports are numbered 1 to 7. For the TP3000 the twisted pair ports are numbered 1 to 6 and the remaining ethernet port (either 10base2 or AUI) is port 7.
CTR pspPacketsRxOk	1.3.6.1.4.1.426.1.7.2.1.3	Counter	read-only	The total number of packets received on this port that did no have any errors.
CTR pspPacketsRxErr	1.3.6.1.4.1.426.1.7.2.1.4	Counter	read-only	The total number of packets received on this port that had errors.
CTR pspPhysicalOk	1.3.6.1.4.1.426.1.7.2.1.5	Counter	read-only	The total number of unicast packets received on this port that did not have any errors.
CTR pspPhysicalErr	1.3.6.1.4.1.426.1.7.2.1.6	Counter	read-only	The total number of unicast packets received on this port that had errors.
CTR pspMulticastOk	1.3.6.1.4.1.426.1.7.2.1.7	Counter	read-only	The total number of multicast packets received on this port that did no have any errors.
CTR pspMulticastErr	1.3.6.1.4.1.426.1.7.2.1.8	Counter	read-only	The total number of multicast packets received on this port that have errors.
CTR pspBroadcastOk	1.3.6.1.4.1.426.1.7.2.1.9	Counter	read-only	The total number of broadcast packets that were received by this port and had no errors.
CTR pspBroadcastErr	1.3.6.1.4.1.426.1.7.2.1.10	Counter	read-only	The total number of broadcast packets that were received by this port and had errors.
CTR pspHostPhysicalOk	1.3.6.1.4.1.426.1.7.2.1.11	Counter	read-only	The total number of unicast packets received by this port that were addressed to the IN3000 and had no errors.
CTR pspHostPhysicalErr	1.3.6.1.4.1.426.1.7.2.1.12	Counter	read-only	The total number of unicast packets received by this port that were addressed to the IN3000 and had errors.
portMiscTable	1.3.6.1.4.1.426.1.7.3		not-accessible	This table contains statistics that deal with the TP3000 and RP3000 ports.
portMiscEntry	1.3.6.1.4.1.426.1.7.3.1		not-accessible	Each row in this table is associated with a port in a TP3000 or RP3000. Note that groups are numbered 1 to 4 and ports are numbered 1 to 7. The row instance is made up of the group number and the port number.
INT psmGroupIndex	1.3.6.1.4.1.426.1.7.3.1.1	INTEGER	read-only	The group that this port resides in. The groups are numbered 1 to 4.
INT psmPortIndex	1.3.6.1.4.1.426.1.7.3.1.2	INTEGER	read-only	The port number of this port. Note that the ports are numbered 1 to 7. For the TP3000 the twisted pair ports are numbered 1 to 6 and the remaining ethernet port (either 10base2 or AUI) is port 7.
STR psmName	1.3.6.1.4.1.426.1.7.3.1.3	DisplayString	read-write	The name assigned to this port.
INT psmType	1.3.6.1.4.1.426.1.7.3.1.4	INTEGER	read-only	The port type.
INT psmLinkState	1.3.6.1.4.1.426.1.7.3.1.5	INTEGER	read-only	The link state of the port. Note that if link pulses are disabled then the link state will be up.
INT psmLinkPulses	1.3.6.1.4.1.426.1.7.3.1.6	INTEGER	read-write	This variable is used to check or set whether this port has link pulses enabled.
CTR psmCollisions	1.3.6.1.4.1.426.1.7.3.1.7	Counter	read-only	The total number of collisions that were received by this port.
CTR psmLateCollisions	1.3.6.1.4.1.426.1.7.3.1.8	Counter	read-only	The total number of late collisions that were received by this port.
CTR psmPartitions	1.3.6.1.4.1.426.1.7.3.1.9	Counter	read-only	The total number of times this port entered the partitioned state.
CTR psmJabbers	1.3.6.1.4.1.426.1.7.3.1.10	Counter	read-only	The total number of frames received by this port that were longer than 1518 bytes, and had a non- integral number of octets or had a bad frame check sequence (FCS).
CTR psmShortFragments	1.3.6.1.4.1.426.1.7.3.1.11	Counter	read-only	The total number of frames received by this port that were less than 64 bytes, and had a non- integral number of octets or had a bad frame check sequence (FCS).
CTR psmCrcFae	1.3.6.1.4.1.426.1.7.3.1.12	Counter	read-only	The total number of packets reveived by this port that had frame alignment errors. Since there was a frame alignment error the packet also had a bad CRC.
CTR psmCrc	1.3.6.1.4.1.426.1.7.3.1.13	Counter	read-only	The total number of packets reveived by this port that did not have frame alignment errors but had a bad CRC.
CTR psmFifoOverrun	1.3.6.1.4.1.426.1.7.3.1.14	Counter	read-only	The total number of packets reveived by this port that caused the ethernet controlled to overrun its FIFO.
CTR psmDeferring	1.3.6.1.4.1.426.1.7.3.1.15	Counter	read-only	The total number of packets received by this port the caused the ethernet controller to detect a jabber.
in3000StatsMemory	1.3.6.1.4.1.426.1.8
INT initHeapSize	1.3.6.1.4.1.426.1.8.1	INTEGER	read-only	The initial heap memory size in bytes.
GAU usedHeap	1.3.6.1.4.1.426.1.8.2	Gauge	read-only	Amount of heap memory in use in bytes.
GAU freeHeap	1.3.6.1.4.1.426.1.8.3	Gauge	read-only	Amount of free heap memory in bytes.
INT heapStatus	1.3.6.1.4.1.426.1.8.4	INTEGER	read-only	The status of the heap. A notOk(2) response means the heap has been corrupted, and an ok(1) reponse means the heap is OK. The heap check is preformed at the time of memory coalescing and not on demand. Therefore, the value of the variable may not match the current state of the heap. If you wish to have the heap checked on demand please use the heapTest variable to preform this test.
CTR mallocCalls	1.3.6.1.4.1.426.1.8.5	Counter	read-only	Number of times malloc() has been called.
CTR reallocCalls	1.3.6.1.4.1.426.1.8.6	Counter	read-only	Number of times realloc() has been called.
CTR callocCalls	1.3.6.1.4.1.426.1.8.7	Counter	read-only	Number of times calloc() has been called.
CTR freeCalls	1.3.6.1.4.1.426.1.8.8	Counter	read-only	Number of times free() has been called.
CTR noMemoryAvailable	1.3.6.1.4.1.426.1.8.9	Counter	read-only	The number of times that there was not enough memory to complete a memory allocation operation.
CTR mnodeCoalesces	1.3.6.1.4.1.426.1.8.10	Counter	read-only	The number of times that the memory manager coalesced mnodes.
CTR coalesceMemCalls	1.3.6.1.4.1.426.1.8.11	Counter	read-only	The number of times that the memory manager was called to coalesced mnodes.
INT coalesceThreshold	1.3.6.1.4.1.426.1.8.12	INTEGER	read-write	This variable is used to set the number of free calls before coalescing memory. This change takes effect as soon as the variable is changed.
in3000StatsIcmp	1.3.6.1.4.1.426.1.9
CTR inUnknownTypes	1.3.6.1.4.1.426.1.9.1	Counter	read-only	Number of ICMP packets received with unknown type fields.
CTR bufferPoolEmpty	1.3.6.1.4.1.426.1.9.2	Counter	read-only	Number of times an ICMP packet was received and there were not enough available buffers.
CTR dataBufferTooSmall	1.3.6.1.4.1.426.1.9.3	Counter	read-only	Number of times an ICMP packet was received and the data buffer was too small.
in3000StatsOS	1.3.6.1.4.1.426.1.10
CTR threadCreateReq	1.3.6.1.4.1.426.1.10.1	Counter	read-only	The number of thread create requests.
CTR threadCreateOk	1.3.6.1.4.1.426.1.10.2	Counter	read-only	The number of successful thread creates.
CTR threadCreateFail	1.3.6.1.4.1.426.1.10.3	Counter	read-only	The number of unsuccessful thread creates.
CTR threadTableFull	1.3.6.1.4.1.426.1.10.4	Counter	read-only	The number of requests to create a thread that failed because the maximum number of threads were reached.
CTR threadKill	1.3.6.1.4.1.426.1.10.5	Counter	read-only	The number of threads that have been killed.
INT threadMaximum	1.3.6.1.4.1.426.1.10.6	INTEGER	read-write	The maximum number of threads that may be created. The set will take effect the next time the IN3000 is initialized.
INT defaultStackSize	1.3.6.1.4.1.426.1.10.7	INTEGER	read-write	The default stack size (in bytes) for each thread. The set will take effect the next time the IN3000 is initialized.
INT defaultTimeSlice	1.3.6.1.4.1.426.1.10.8	INTEGER	read-write	The default time slice (in milliseconds) for each thread. The set will take effect the next time the IN3000 is initialized. All newly created threads will get the new time slice.
CTR bogusInterrupts	1.3.6.1.4.1.426.1.10.9	Counter	read-only	The total number of bogus interrupts.
CTR divideError	1.3.6.1.4.1.426.1.10.10	Counter	read-only	The total number of divide by zero error interrupts.
CTR singleStep	1.3.6.1.4.1.426.1.10.11	Counter	read-only	The total number of single step interrupts.
CTR breakpoint	1.3.6.1.4.1.426.1.10.12	Counter	read-only	The total number of break point interrupts.
CTR interruptOverflow	1.3.6.1.4.1.426.1.10.13	Counter	read-only	The total number of interrupt overflows.
CTR arrayBoundsCheck	1.3.6.1.4.1.426.1.10.14	Counter	read-only	The total number of array bound check interrupts.
CTR invalidOpcode	1.3.6.1.4.1.426.1.10.15	Counter	read-only	Th total number of invalid op code interrupts.
CTR escapeOpcode	1.3.6.1.4.1.426.1.10.16	Counter	read-only	The total number of escape opcode interrupts.
CTR coprocessorFault	1.3.6.1.4.1.426.1.10.17	Counter	read-only	Th total number of coprocessor fault interrupts.
threadTable	1.3.6.1.4.1.426.1.10.18		not-accessible	A table containing the currently running threads.
threadEntry	1.3.6.1.4.1.426.1.10.18.1		not-accessible	Information about a particular thread. The instance of the table entries is the tid.
INT tid	1.3.6.1.4.1.426.1.10.18.1.1	INTEGER	read-only	This is the thread identifier. This is the unique number assigned to a thread. This value is also the instance of the table row.
STR name	1.3.6.1.4.1.426.1.10.18.1.2	DisplayString	read-only	This is the thread's assigned name.
INT priority	1.3.6.1.4.1.426.1.10.18.1.3	INTEGER	read-only	This is the thread's priority.
INT muxCount	1.3.6.1.4.1.426.1.10.18.1.4	INTEGER	read-only	This is the thread's mutual exclusion Count.
INT status	1.3.6.1.4.1.426.1.10.18.1.5	INTEGER	read-only	This is the thread's status at the time of the SNMP query.
INT stackSize	1.3.6.1.4.1.426.1.10.18.1.6	INTEGER	read-only	This is the thread's stack size.
in3000StatsArp	1.3.6.1.4.1.426.1.11
CTR arpInReqs	1.3.6.1.4.1.426.1.11.1	Counter	read-only	The number of received ARP requests.
CTR arpInRpls	1.3.6.1.4.1.426.1.11.2	Counter	read-only	The number of ARP replies received.
CTR arpOutReqs	1.3.6.1.4.1.426.1.11.3	Counter	read-only	The number of ARP requests sent.
CTR arpOutRpls	1.3.6.1.4.1.426.1.11.4	Counter	read-only	The number of ARP replies sent.
CTR arpGetReqs	1.3.6.1.4.1.426.1.11.5	Counter	read-only	The number of ARP Get requests.
CTR arpPutReqs	1.3.6.1.4.1.426.1.11.6	Counter	read-only	The number of ARP Put requests.
CTR arpDeadEntries	1.3.6.1.4.1.426.1.11.7	Counter	read-only	The number of dead ARP entries.
INT arpCacheSize	1.3.6.1.4.1.426.1.11.8	INTEGER	read-write	The maximum number of ARP cache entries. Changing this value will take place on next reboot.
INT arpEntryTimeout	1.3.6.1.4.1.426.1.11.9	INTEGER	read-write	The length of time (in seconds) that an ARP entry is stored. If an entry is not accessed within this time period the entry is purged. Changes to this take place immediately.
INT arpNumRetries	1.3.6.1.4.1.426.1.11.10	INTEGER	read-write	The number of ARP request retries before giving up. Changes to this take place after next reboot.
INT arpReplyTimeout	1.3.6.1.4.1.426.1.11.11	INTEGER	read-write	The length of time ARP waits for an ARP response. Changes to this take place immediately.
in3000StatsIp	1.3.6.1.4.1.426.1.12
CTR inHdrTooSmall	1.3.6.1.4.1.426.1.12.1	Counter	read-only	The number of IP packets with headers too small. This is a subset of ipHdrErrors.
CTR inHdrBadVersion	1.3.6.1.4.1.426.1.12.2	Counter	read-only	The number of IP packets with Incrrect version information. This is a subset of ipHdrErrors.
CTR inHdrBadCheckSum	1.3.6.1.4.1.426.1.12.3	Counter	read-only	The number of IP packets with invalid checksums. This is a subset of ipHdrErrors.
CTR inHdrBadOption	1.3.6.1.4.1.426.1.12.4	Counter	read-only	The number of IP packets with one or more incorrect options. This is a subset of ipHdrErrors.
CTR inDataNotAllocated	1.3.6.1.4.1.426.1.12.5	Counter	read-only	This is an internal error. This is a subset of inDiscards.
CTR inNoPacketBuffers	1.3.6.1.4.1.426.1.12.6	Counter	read-only	The number of IP packets received that had to be discarded due to lack of buffer space. This is a subset of inDiscards.
CTR outNoPacketBuffers	1.3.6.1.4.1.426.1.12.7	Counter	read-only	The number of IP packets that were to be sent but had to be discarded due to lack of buffer space. This is a subset of outDiscards.
CTR outBadTransmits	1.3.6.1.4.1.426.1.12.8	Counter	read-only	The number of IP packets that could not be transmitted even though the packet was valid.
CTR outAddrNotResolved	1.3.6.1.4.1.426.1.12.9	Counter	read-only	The number of IP packets that could not be transmitted due to ARP failure. The address could not be resolved.
INT reasmTimeout	1.3.6.1.4.1.426.1.12.10	INTEGER	read-write	The IP reasmebly timeout.
in3000StatsHmi	1.3.6.1.4.1.426.1.13
CTR hmiReqs	1.3.6.1.4.1.426.1.13.1	Counter	read-only	The number of HMI requests received.
CTR hmiResp	1.3.6.1.4.1.426.1.13.2	Counter	read-only	The number of HMI reresponses sent. This does not include acknowledgement frames.
CTR hmiError	1.3.6.1.4.1.426.1.13.3	Counter	read-only	The number of errors that occured processing HMI requests.
CTR hmiAckOk	1.3.6.1.4.1.426.1.13.4	Counter	read-only	The number of HMI Good Acknowledgements sent.
CTR hmiAckBad	1.3.6.1.4.1.426.1.13.5	Counter	read-only	The number of HMI Bad Acknowledgements sent.
CTR hmiTrap	1.3.6.1.4.1.426.1.13.6	Counter	read-only	The number of HMI traps sent.
CTR hmiIdReq	1.3.6.1.4.1.426.1.13.7	Counter	read-only	The number of HMI ID requests sent.
CTR hmiGetInfoReq	1.3.6.1.4.1.426.1.13.8	Counter	read-only	The number of HMI GET INFO requests sent.
CTR hmiSelftestReq	1.3.6.1.4.1.426.1.13.9	Counter	read-only	The number of HMI SELFTEST requests sent.
CTR hmiPortEnableReq	1.3.6.1.4.1.426.1.13.10	Counter	read-only	The number of HMI PORT ENABLE requests sent.
CTR hmiPortDisableReq	1.3.6.1.4.1.426.1.13.11	Counter	read-only	The number of HMI PORT DISABLE requests sent.
CTR hmiStatusReq	1.3.6.1.4.1.426.1.13.12	Counter	read-only	The number of HMI STATUS requests sent.
CTR hmiRepeaterReq	1.3.6.1.4.1.426.1.13.13	Counter	read-only	The number of HMI REPEATER requests sent.
CTR hmiPortObjectsReq	1.3.6.1.4.1.426.1.13.14	Counter	read-only	The number of HMI POR OBJECTS request sent.
CTR hmiPortChangesReq	1.3.6.1.4.1.426.1.13.15	Counter	read-only	The number of HMI PORT CHANGES requests sent.
CTR hmiSelfTestStatReq	1.3.6.1.4.1.426.1.13.16	Counter	read-only	The number of HMI SELF TEST STATUTS requests sent.
CTR hmiDebugOnReq	1.3.6.1.4.1.426.1.13.17	Counter	read-only	The number of HMI DEBUG ON requests sent.
CTR hmiDebugOffReq	1.3.6.1.4.1.426.1.13.18	Counter	read-only	The number of HMI DEBUG OFF requests sent.
CTR hmiGetInfoResp	1.3.6.1.4.1.426.1.13.19	Counter	read-only	The number of HMI GET INFO responses sent.
CTR hmiSelfTestResp	1.3.6.1.4.1.426.1.13.20	Counter	read-only	The number of HMI SELF TEST responses sent.
CTR hmiStatusResp	1.3.6.1.4.1.426.1.13.21	Counter	read-only	The number of HMI STATUS responses sent.
CTR hmiRepeaterResp	1.3.6.1.4.1.426.1.13.22	Counter	read-only	The number of HMI REPEATER responses sent.
CTR hmiPortObjectsResp	1.3.6.1.4.1.426.1.13.23	Counter	read-only	The number of HMI PORT OBJECTS responses sent.
CTR hmiPortChangesResp	1.3.6.1.4.1.426.1.13.24	Counter	read-only	The number of HMI PORT CHANGES responses sent.
CTR hmiSelfTestStatResp	1.3.6.1.4.1.426.1.13.25	Counter	read-only	The number of HMI SLEF TEST STATUS responses sent.
in3000StatsUart	1.3.6.1.4.1.426.1.14
CTR uartInOctets	1.3.6.1.4.1.426.1.14.1	Counter	read-only	The number of octets received by the UART driver.
CTR uartOutOctets	1.3.6.1.4.1.426.1.14.2	Counter	read-only	The number of octets sent by the UART driver.
CTR uartInDelivers	1.3.6.1.4.1.426.1.14.3	Counter	read-only	The number of octets received by the Uart and passed to upper layer protocol, such as HMI.
CTR uartOutDelivers	1.3.6.1.4.1.426.1.14.4	Counter	read-only	The number of bytes sent by the Uart there were from a higher level protocol, such as HMI.
INT uartBaudRate	1.3.6.1.4.1.426.1.14.5	INTEGER	read-only	The baud rate of the serial port.
INT uartDataBits	1.3.6.1.4.1.426.1.14.6	INTEGER	read-write	The the number of data bits used by the serial port.
INT uartStopBits	1.3.6.1.4.1.426.1.14.7	INTEGER	read-write	The number of stop bits used by the serial port.
INT uartParity	1.3.6.1.4.1.426.1.14.8	INTEGER	read-write	The data parity used by the serial port.
INT uartHandshaking	1.3.6.1.4.1.426.1.14.9	INTEGER	read-write	The handshaking used bu the serial port.
CTR uartOverrunErrors	1.3.6.1.4.1.426.1.14.10	Counter	read-only	The number of time the UART has overrun causing an error.
CTR uartParityErrors	1.3.6.1.4.1.426.1.14.11	Counter	read-only	The number frames received from the UART that had parity errors.
CTR uartFramingErrors	1.3.6.1.4.1.426.1.14.12	Counter	read-only	The number frames received from the UART that had framing errors.
CTR uartBreakIndicators	1.3.6.1.4.1.426.1.14.13	Counter	read-only	The number indicators received by the UART.
in3000SelfTests	1.3.6.1.4.1.426.1.15
INT dallasTest	1.3.6.1.4.1.426.1.15.1	INTEGER	read-write	This variable is used to run a diagnostic test on the Universal Clock. To run the test this variable must be set to runTest(3). Setting this to any other value will result in an error.
INT flashTest	1.3.6.1.4.1.426.1.15.2	INTEGER	read-write	This variable is used to run a diagnostic test on the Non-Volitile RAM. To run the test this variable must be set to runTest(3). Setting this to any other value will result in an error.
INT uartTest	1.3.6.1.4.1.426.1.15.3	INTEGER	read-write	This variable is used to run a diagnostic test on the serial port (UART). To run the test this variable must be set to runTest(3). Setting this to any other value will result in an error.
INT nicTest	1.3.6.1.4.1.426.1.15.4	INTEGER	read-write	This variable is used to run a diagnostic test on the ethernet controller. To run the test this variable must be set to runTest(3). Setting this to any other value will result in an error.
INT netioTest	1.3.6.1.4.1.426.1.15.5	INTEGER	read-write	This variable is used to run a diagnostic test on the ethernet modules in the microhubs. To run the test this variable must be set to testHub1, testHub2, testHub3 or testHub4. Setting this to any other value will result in an error.
INT heapTest	1.3.6.1.4.1.426.1.15.6	INTEGER	read-write	This variable is used to run a diagnostic test on the memory heap. To run the test this variable must be set to runTest(3). Setting this to any other value will result in an error.

RFC description

Provides product information and management objects for the Compex IN3000 network hub.

Start monitoring Compex Systems IN3000 device with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download COMPEX-IN3000

What Is COMPEX-IN3000?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description