COMPEX-IN3000 :: psmCrc

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCOMPEX-IN3000psmCrc

psmCrc

Module: COMPEX-IN3000

OID (symbolic): COMPEX-IN3000::psmCrc

OID (numeric): 1.3.6.1.4.1.426.1.7.3.1.13

Node type: OBJECT-TYPE

Type: Counter

Access: read-only

Description: The total number of packets reveived by this port that did not have frame alignment errors but had a bad CRC.

What is psmCrc?

This counter tallies packets received by this one port that had a bad CRC but no frame alignment error, meaning the frame boundaries were fine but the content was still corrupted. This pattern on a single port more often points to cable degradation than a severe wiring fault. An admin seeing psmCrc climb steadily on port 5 without a matching rise in psmCrcFae would consider that cable run aging or damaged rather than newly broken.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.426.1.7.3.1.13
snmpwalk -v2c -c public <target> COMPEX-IN3000::psmCrc

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.426.1.7.3.1.13.1
snmpget -v2c -c public <target> COMPEX-IN3000::psmCrc.1

Start monitoring Compex Systems IN3000 device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COMPEX-IN3000::psmCrc OID value, configure state conditions and alerts, and monitor any Compex Systems IN3000 device from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.426compexCOMPEX-IN3000
1.3.6.1.4.1.426.1in3000COMPEX-IN3000
1.3.6.1.4.1.426.1.7in3000StatsPortCOMPEX-IN3000
1.3.6.1.4.1.426.1.7.3portMiscTableCOMPEX-IN3000
1.3.6.1.4.1.426.1.7.3.1portMiscEntryCOMPEX-IN3000
1.3.6.1.4.1.426.1.7.3.1.13psmCrcCOMPEX-IN3000