All MIBs › COMPEX-IN3000 › uartBreakIndicators
uartBreakIndicators
Module: COMPEX-IN3000
OID (symbolic): COMPEX-IN3000::uartBreakIndicators
OID (numeric): 1.3.6.1.4.1.426.1.14.13
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: The number indicators received by the UART.
What is uartBreakIndicators?
This counter tallies the number of break conditions (a sustained line-idle signal used to interrupt serial communication) the UART has detected on the console line. An admin might see this increment intentionally, for example when using a break sequence to interrupt a boot process, or unexpectedly if the serial cable is faulty. A rising uartBreakIndicators count without an admin having deliberately sent a break would suggest an electrical fault on the serial connection.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.426.1.14.13 snmpwalk -v2c -c public <target> COMPEX-IN3000::uartBreakIndicators
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.426.1.14.13.1 snmpget -v2c -c public <target> COMPEX-IN3000::uartBreakIndicators.1
Start monitoring Compex Systems IN3000 device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COMPEX-IN3000::uartBreakIndicators OID value, configure state conditions and alerts, and monitor any Compex Systems IN3000 device from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.426 | compex | COMPEX-IN3000 |
| 1.3.6.1.4.1.426.1 | in3000 | COMPEX-IN3000 |
| 1.3.6.1.4.1.426.1.14 | in3000StatsUart | COMPEX-IN3000 |
| 1.3.6.1.4.1.426.1.14.13 | uartBreakIndicators | COMPEX-IN3000 |