All MIBs › COMPEX-IN3000 › uartParityErrors
uartParityErrors
Module: COMPEX-IN3000
OID (symbolic): COMPEX-IN3000::uartParityErrors
OID (numeric): 1.3.6.1.4.1.426.1.14.11
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: The number frames received from the UART that had parity errors.
What is uartParityErrors?
This counter tallies the number of frames received by the UART that failed the configured parity check. A rising count almost always indicates a parity setting mismatch between the IN3000 and the connected terminal, or electrical noise on the serial cable. An admin seeing uartParityErrors climb would first verify that uartParity on the device matches the terminal software's configured parity setting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.426.1.14.11 snmpwalk -v2c -c public <target> COMPEX-IN3000::uartParityErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.426.1.14.11.1 snmpget -v2c -c public <target> COMPEX-IN3000::uartParityErrors.1
Start monitoring Compex Systems IN3000 device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COMPEX-IN3000::uartParityErrors OID value, configure state conditions and alerts, and monitor any Compex Systems IN3000 device from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.426 | compex | COMPEX-IN3000 |
| 1.3.6.1.4.1.426.1 | in3000 | COMPEX-IN3000 |
| 1.3.6.1.4.1.426.1.14 | in3000StatsUart | COMPEX-IN3000 |
| 1.3.6.1.4.1.426.1.14.11 | uartParityErrors | COMPEX-IN3000 |