COMPEX-IN3000 :: gsmCrc

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCOMPEX-IN3000gsmCrc

gsmCrc

Module: COMPEX-IN3000

OID (symbolic): COMPEX-IN3000::gsmCrc

OID (numeric): 1.3.6.1.4.1.426.1.6.3.1.13

Node type: OBJECT-TYPE

Type: Counter

Access: read-only

Description: The total number of packets received from all ports in the group that did not have a frame alignment error, but they had a bad CRC.

What is gsmCrc?

This counter tallies packets received across all ports in a group that had a bad CRC but no frame alignment error, meaning the frame's byte boundaries were fine but its content was still corrupted. This pattern more often points to a marginal cable or connector than to the more severe alignment problems tracked by gsmCrcFae. An admin seeing gsmCrc rise steadily on group 2 without a matching rise in gsmCrcFae would suspect cable degradation rather than a wiring fault.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.426.1.6.3.1.13
snmpwalk -v2c -c public <target> COMPEX-IN3000::gsmCrc

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.426.1.6.3.1.13.1
snmpget -v2c -c public <target> COMPEX-IN3000::gsmCrc.1

Start monitoring Compex Systems IN3000 device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COMPEX-IN3000::gsmCrc OID value, configure state conditions and alerts, and monitor any Compex Systems IN3000 device from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.426compexCOMPEX-IN3000
1.3.6.1.4.1.426.1in3000COMPEX-IN3000
1.3.6.1.4.1.426.1.6in3000StatsGroupCOMPEX-IN3000
1.3.6.1.4.1.426.1.6.3groupMiscTableCOMPEX-IN3000
1.3.6.1.4.1.426.1.6.3.1groupMiscEntryCOMPEX-IN3000
1.3.6.1.4.1.426.1.6.3.1.13gsmCrcCOMPEX-IN3000