All MIBs › COMPEX-IN3000 › uartStopBits
uartStopBits
Module: COMPEX-IN3000
OID (symbolic): COMPEX-IN3000::uartStopBits
OID (numeric): 1.3.6.1.4.1.426.1.14.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The number of stop bits used by the serial port.
What is uartStopBits?
This read-write enumerated value sets whether the IN3000's serial port uses one or two stop bits per character frame. An admin configures their terminal to match this setting exactly, since a stop-bit mismatch causes intermittent framing errors on the console link. An admin seeing uartFramingErrors rise on the console port would double-check that uartStopBits matches what their terminal emulator is configured to use.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.426.1.14.7 snmpwalk -v2c -c public <target> COMPEX-IN3000::uartStopBits
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.426.1.14.7.1 snmpget -v2c -c public <target> COMPEX-IN3000::uartStopBits.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.426.1.14.7.1 i <value>
Start monitoring Compex Systems IN3000 device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COMPEX-IN3000::uartStopBits OID value, configure state conditions and alerts, and monitor any Compex Systems IN3000 device from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.426 | compex | COMPEX-IN3000 |
| 1.3.6.1.4.1.426.1 | in3000 | COMPEX-IN3000 |
| 1.3.6.1.4.1.426.1.14 | in3000StatsUart | COMPEX-IN3000 |
| 1.3.6.1.4.1.426.1.14.7 | uartStopBits | COMPEX-IN3000 |