All MIBs › COMPEX-IN3000 › outBadTransmits
outBadTransmits
Module: COMPEX-IN3000
OID (symbolic): COMPEX-IN3000::outBadTransmits
OID (numeric): 1.3.6.1.4.1.426.1.12.8
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: The number of IP packets that could not be transmitted even though the packet was valid.
What is outBadTransmits?
This counter tallies IP packets that could not be transmitted even though the packet itself was determined to be valid. A rising value points to a lower-layer transmission failure, such as an Ethernet controller problem, rather than any fault in the IP packet's own construction. An admin seeing outBadTransmits climb would check the rptrNICTxCollisions and related NIC error counters to see if a hardware transmit problem is the underlying cause.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.426.1.12.8 snmpwalk -v2c -c public <target> COMPEX-IN3000::outBadTransmits
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.426.1.12.8.1 snmpget -v2c -c public <target> COMPEX-IN3000::outBadTransmits.1
Start monitoring Compex Systems IN3000 device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COMPEX-IN3000::outBadTransmits OID value, configure state conditions and alerts, and monitor any Compex Systems IN3000 device from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.426 | compex | COMPEX-IN3000 |
| 1.3.6.1.4.1.426.1 | in3000 | COMPEX-IN3000 |
| 1.3.6.1.4.1.426.1.12 | in3000StatsIp | COMPEX-IN3000 |
| 1.3.6.1.4.1.426.1.12.8 | outBadTransmits | COMPEX-IN3000 |