A3COM-HUAWEI-HGMP-MIB

All MIBs › A3COM-HUAWEI-HGMP-MIB

Organization: Huawei 3Com Technologies Co., Ltd.

Last Updated: 2005-12-06

Category: Device Management, Vendor: H3C/HH3C

Description: Manages H3C Group Management Protocol (HGMP) cluster membership, topology, and remote device control.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is A3COM-HUAWEI-HGMP-MIB?

A3COM-HUAWEI-HGMP-MIB is a jointly-branded 3Com/H3C (formerly Huawei-3Com) proprietary MIB implementing the HGMP (Huawei Group Management Protocol), a cluster-management protocol used on LAN switch products to let one management device administer a cluster of neighboring switches as if they were a single unit. It is expected to expose cluster topology, membership, and remote-device-control configuration, though no concrete object list is available in this batch to confirm specific table names. Where implemented, such MIBs typically support monitoring of cluster member reachability and management-device role/status, giving visibility into whether clustered switches remain under central management control. It depends on the vendor's underlying HGMP protocol rather than any IETF standard, and is not portable outside 3Com/H3C/Huawei switch lines of that era. It is deployed in enterprise LAN environments where 3Com/H3C switches are organized into management clusters for simplified administration. Network engineers evaluating or troubleshooting this functionality can download the A3COM-HUAWEI-HGMP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-HGMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

3Com/H3C/Huawei-3Com LAN switch

Monitoring Examples

No sample objects were available for this module, so a concrete polling scenario cannot be grounded in real object names; in general, an HGMP MIB implementation would be polled to confirm which switches are current cluster members and whether the management/commander switch retains connectivity to each member switch.

Imported Objects

From A3COM-HUAWEI-OID-MIB

huaweiUtility

OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
OCT hgmpBlacklistAccessDeviceId	1.3.6.1.4.1.43.45.1.6.7.1.23.3.1.2	OCTET STRING	read-only	Unique identifier indicating the access device of a black list switch. Tracing from a black list device to the cluster commander switch, the device which the black list switch directly connects to is the access device. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. 10 bytes of 0xff means invalid value for this object. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
OCT hgmpBlacklistAccessPortName	1.3.6.1.4.1.43.45.1.6.7.1.23.3.1.3	OCTET STRING	read-only	The port which the access device connecting to the black list switch is named access port, the object returns the access port name. An empty string means invalid value for this object.
OCT hgmpBlacklistDeviceId	1.3.6.1.4.1.43.45.1.6.7.1.23.3.1.1	OCTET STRING	not-accessible	Unique identifier indicating a black list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
hgmpBlacklistEntry	1.3.6.1.4.1.43.45.1.6.7.1.23.3.1		not-accessible	Entry items
ROW hgmpBlacklistRowStatus	1.3.6.1.4.1.43.45.1.6.7.1.23.3.1.4	RowStatus	read-create	The row status of this table.
hgmpBlacklistTable	1.3.6.1.4.1.43.45.1.6.7.1.23.3		not-accessible	Cluster switches black list table. The black list table records all black list devices, and a device in black list is not permitted to join in any cluster.
OCT hgmpClusterCmdSwMac	1.3.6.1.4.1.43.45.1.6.7.1.18	OCTET STRING	read-only	The MAC address of administrator switch. It will be filled with zero when not be a member of cluster.
INT hgmpClusterMaxPoolNum	1.3.6.1.4.1.43.45.1.6.7.1.17	INTEGER	read-only	Max switch members that the cluster can support(include administrator switch).
MAC hgmpClusterProtocolMac	1.3.6.1.4.1.43.45.1.6.7.1.22.1	MacAddress	read-write	Protocol MAC of HGMP protocol family. All multicast packets of this protocol family use this MAC as destination MAC.
INT hgmpClusterRole	1.3.6.1.4.1.43.45.1.6.7.1.16	INTEGER	read-only	This switch's role in cluster.
OCT hgmpCmdClusterName	1.3.6.1.4.1.43.45.1.6.7.1.7	OCTET STRING	read-write	Cluster name of the administrator switch
INT hgmpCmdLanswitchFlag	1.3.6.1.4.1.43.45.1.6.7.1.6	INTEGER	read-write	Administrator switch flag
hgmpEventsV2	1.3.6.1.4.1.43.45.1.6.7.1.0			Definition point for cluster notifications.
IP hgmpFtpServer	1.3.6.1.4.1.43.45.1.6.7.1.10	IpAddress	read-write	The cluster members can access the Ftp Server through the administrator switch, which can only be configured and accessed on the administrator switch.
OCT hgmpGrpMemberDeviceId	1.3.6.1.4.1.43.45.1.6.7.1.14.1.1	OCTET STRING	read-only	4 bytes reserved as 0x0 + 6 bytes of MAC address, expressed as a character string of the hexadecimal number.
I32 hgmpGrpMemberDisconCount	1.3.6.1.4.1.43.45.1.6.7.1.14.1.8	Integer32	read-only	Count of inside communication disconnection between the member switch and the administrator switch.
I32 hgmpGrpMemberEnrollTime	1.3.6.1.4.1.43.45.1.6.7.1.14.1.9	Integer32	read-only	Enrollment time of the member, measured in seconds.
hgmpGrpMemberEntry	1.3.6.1.4.1.43.45.1.6.7.1.14.1		not-accessible
IP hgmpGrpMemberIpAddr	1.3.6.1.4.1.43.45.1.6.7.1.14.1.3	IpAddress	read-only	The private IP addresses of the member switches for the communication inside the cluster.
OCT hgmpGrpMemberName	1.3.6.1.4.1.43.45.1.6.7.1.14.1.4	OCTET STRING	read-only	Hostname of the member switch
ROW hgmpGrpMemberOperate	1.3.6.1.4.1.43.45.1.6.7.1.14.1.10	RowStatus	read-write	Operation indication field, indicates the operation of adding/removing a member by the network management agent.
OCT hgmpGrpMemberPassword	1.3.6.1.4.1.43.45.1.6.7.1.14.1.5	OCTET STRING	read-write	Member password for joining a cluster
OCT hgmpGrpMemberPlatform	1.3.6.1.4.1.43.45.1.6.7.1.14.1.6	OCTET STRING	read-only	Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.
I32 hgmpGrpMemberSerial	1.3.6.1.4.1.43.45.1.6.7.1.14.1.2	Integer32	read-only	When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it.
INT hgmpGrpMemberStatus	1.3.6.1.4.1.43.45.1.6.7.1.14.1.7	INTEGER	read-only	Member status on the administrator switch, use for displaying the network management status.
hgmpGrpMemberTable	1.3.6.1.4.1.43.45.1.6.7.1.14		not-accessible	Table of cluster member switches
I32 hgmpGrpMemberTableChange	1.3.6.1.4.1.43.45.1.6.7.1.4	Integer32	read-only	Add 1 to the member list after it changes. The administrator checks if the value has changed. If not, he will not read the list once more.
I32 hgmpHandShakeHoldtime	1.3.6.1.4.1.43.45.1.6.7.1.3	Integer32	read-write	Holdtime of administrator switch and member switch in the cluster.
I32 hgmpHandShakeInterval	1.3.6.1.4.1.43.45.1.6.7.1.2	Integer32	read-write	Handshaking interval of the cluster member switches.
IP hgmpLogHost	1.3.6.1.4.1.43.45.1.6.7.1.13	IpAddress	read-write	Log host of the cluster, which can only be configured and accessed on the administrator switch.
INT hgmpMainLanswitchFlag	1.3.6.1.4.1.43.45.1.6.7.2.3	INTEGER	read-write	The status of the local switch in the stack.
OCT hgmpMemberDevId	1.3.6.1.4.1.43.45.1.6.7.1.24.1.1	OCTET STRING	read-only	Unique identifier indicating the switch in cluster. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address.
I32 hgmpMemberDisconRate	1.3.6.1.4.1.43.45.1.6.7.1.5	Integer32	read-only	Disconnection times of the member and administrator switches divided by member number times 1000.
INT hgmpMemberEraseflash	1.3.6.1.4.1.43.45.1.6.7.1.15.1.2	INTEGER	read-write	Whether to erase the configuration file from the flash after resetting the switch. Read this node, cannotget(65535) will be returned.
NTF hgmpMemberfailure	1.3.6.1.4.1.43.45.1.6.7.1.0.1			When a cluster member failure, send a snmp trap to the network management.
hgmpMemberPriPortEntry	1.3.6.1.4.1.43.45.1.6.7.1.24.1		not-accessible	Information about a specified member private port entry. The indexes of the entry are hgmpGrpMemberDevId and hgmpMemberPriPortProto, which indicate entries in the table.
U32 hgmpMemberPriPortNum	1.3.6.1.4.1.43.45.1.6.7.1.24.1.4	Unsigned32	read-only	The private port number of member switch, used by specified hgmpMemberPriPortProto. By using the private IP address, specified protocol and port number, other devices outside cluster can access member switch. The private IP address can be acquired by reading hgmpGrpMemberIpAddr.
U32 hgmpMemberPriPortProto	1.3.6.1.4.1.43.45.1.6.7.1.24.1.2	Unsigned32	not-accessible	The index of this table. Each instance value of this object corresponds to a different protocol.
STR hgmpMemberPriPortProtoDescr	1.3.6.1.4.1.43.45.1.6.7.1.24.1.3	DisplayString	read-only	It describes the hgmpMemberPriPortProtocol object value. For example, it is 'SNMP' when hgmpMemberPriPortProtocol value is 1.
hgmpMemberPriPortTable	1.3.6.1.4.1.43.45.1.6.7.1.24		not-accessible	This table contains port number for different network protocols on each member switch. The port number can be used to access a specified member switch with specified protocol and private IP address.
NTF hgmpMemberRecover	1.3.6.1.4.1.43.45.1.6.7.1.0.2			When a cluster member recover, send a snmp trap to the network management.
hgmpMemberResetEntry	1.3.6.1.4.1.43.45.1.6.7.1.15.1		not-accessible
OCT hgmpMemberResetMAC	1.3.6.1.4.1.43.45.1.6.7.1.15.1.1	OCTET STRING	read-only	The management MAC address of the switch to be reset, which is the unique identifier of the switch.
hgmpMemberResetTable	1.3.6.1.4.1.43.45.1.6.7.1.15		not-accessible	Reset a member switch in the cluster.
NTF hgmpMemberStatusChange	1.3.6.1.4.1.43.45.1.6.7.1.0.3			When a cluster member status change, send a snmp trap to the network management.
IP hgmpMngPriIpMask	1.3.6.1.4.1.43.45.1.6.7.1.9	IpAddress	read-write	The private management IP address mask assigned by the administrator switch, which cannot be modified after the cluster has been created.
IP hgmpMngPriIpSegCMIP	1.3.6.1.4.1.43.45.1.6.7.1.8	IpAddress	read-write	The private management IP address of the administrator switch, which can not be modified after the cluster has been created.
NTF hgmpNetTopChange	1.3.6.1.4.1.43.45.1.6.7.1.0.4			When net topology of this cluster change, send a snmp trap to the network management.
INT hgmpNTDPCacheCapabilities	1.3.6.1.4.1.43.45.1.6.7.4.10.1.5	INTEGER	read-only	The capabilities of the device. FF indicates that the field was not included in in the latest NTDP packet.
I32 hgmpNTDPCacheChange	1.3.6.1.4.1.43.45.1.6.7.4.7	Integer32	read-only	Add 1 when the device table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again.
OCT hgmpNTDPCacheClusterName	1.3.6.1.4.1.43.45.1.6.7.4.10.1.3	OCTET STRING	read-only	Name of the cluster including the device.
INT hgmpNTDPCacheClusterRole	1.3.6.1.4.1.43.45.1.6.7.4.10.1.4	INTEGER	read-only	Cluster role of the current device, which can be a administrator switch (0x01), member switch(0x02), backup switch(0x03), candidate switch(0x10) or an independent switch (incapable of cluster member) (0x11).
OCT hgmpNTDPCacheDeviceID	1.3.6.1.4.1.43.45.1.6.7.4.10.1.2	OCTET STRING	read-only	2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
hgmpNTDPCacheEntry	1.3.6.1.4.1.43.45.1.6.7.4.10.1		not-accessible
I32 hgmpNTDPCacheHashIndex	1.3.6.1.4.1.43.45.1.6.7.4.10.1.1	Integer32	read-only	Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range.
INT hgmpNTDPCacheHop	1.3.6.1.4.1.43.45.1.6.7.4.10.1.9	INTEGER	read-only	Hops to this switch.
INT hgmpNTDPCacheMngVLAN	1.3.6.1.4.1.43.45.1.6.7.4.10.1.8	INTEGER	read-only	The management VLAN ID of the device.
OCT hgmpNTDPCachePlatform	1.3.6.1.4.1.43.45.1.6.7.4.10.1.7	OCTET STRING	read-only	Hardware platform. A null string indicates that the field was not included in the latest NTDP packet.
hgmpNTDPCacheTable	1.3.6.1.4.1.43.45.1.6.7.4.10		not-accessible	Access the information about the switch from the topology table.
OCT hgmpNTDPCacheVersion	1.3.6.1.4.1.43.45.1.6.7.4.10.1.6	OCTET STRING	read-only	The version information of the corresponding device. A null string indicates that the field was not included in in the latest NTDP packet.
I32 hgmpNTDPCollectTopTime	1.3.6.1.4.1.43.45.1.6.7.4.1	Integer32	read-write	Topology collection interval of the administrator switch of the cluster, measured in minutes.
I32 hgmpNTDPHopDelay	1.3.6.1.4.1.43.45.1.6.7.4.5	Integer32	read-write	Set the delay to forward the topology request from every hop, measured in milliseconds.
I32 hgmpNTDPHopRange	1.3.6.1.4.1.43.45.1.6.7.4.2	Integer32	read-write	Range of the topology collection of the administrator switch
INT hgmpNTDPInterfaceEnable	1.3.6.1.4.1.43.45.1.6.7.4.9.1.2	INTEGER	read-write	If it is true, the device will send and receive the NTDP packets via the interface. To disable the NTDP function on the interface, set the entry as false.
hgmpNTDPInterfaceEntry	1.3.6.1.4.1.43.45.1.6.7.4.9.1		not-accessible
I32 hgmpNTDPInterfaceIfIndex	1.3.6.1.4.1.43.45.1.6.7.4.9.1.1	Integer32	read-only	Unique identifier an interface of the device.
hgmpNTDPInterfaceTable	1.3.6.1.4.1.43.45.1.6.7.4.9		not-accessible	Enable/Disable the NTDP on the switch port.
I32 hgmpNTDPLastTopCollectDuration	1.3.6.1.4.1.43.45.1.6.7.4.6	Integer32	read-only	Duration of the latest overall topology collection, a performance count measured in seconds.
I32 hgmpNTDPPortDelay	1.3.6.1.4.1.43.45.1.6.7.4.4	Integer32	read-write	Set the delay to forward the topology request via the ports, measured in milliseconds.
INT hgmpNTDPRun	1.3.6.1.4.1.43.45.1.6.7.4.3	INTEGER	read-write	Enable/Disable the NTDP function on the switch.
OCT hgmpNTDPTopEdgeEndDevID	1.3.6.1.4.1.43.45.1.6.7.4.11.1.4	OCTET STRING	read-only	2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
OCT hgmpNTDPTopEdgeEndPort	1.3.6.1.4.1.43.45.1.6.7.4.11.1.8	OCTET STRING	read-only	The number of the last port of a topology edge. Interface type + card number / slot number / sequence number.
I32 hgmpNTDPTopEdgeIndex	1.3.6.1.4.1.43.45.1.6.7.4.11.1.3	Integer32	read-only	Edge index of this entry in the data structure.
OCT hgmpNTDPTopEdgeStartDevID	1.3.6.1.4.1.43.45.1.6.7.4.11.1.2	OCTET STRING	read-only	2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
OCT hgmpNTDPTopEdgeStartPort	1.3.6.1.4.1.43.45.1.6.7.4.11.1.5	OCTET STRING	read-only	The number of the first port of a topology edge. Interface type + card number / slot number / sequence number.
INT hgmpNTDPTopEdgeStartPortFullDuplex	1.3.6.1.4.1.43.45.1.6.7.4.11.1.6	INTEGER	read-only	The full-duplex status of the first port on a topology edge.
I32 hgmpNTDPTopEdgeStartPortSpeed	1.3.6.1.4.1.43.45.1.6.7.4.11.1.7	Integer32	read-only	The speed of the first port on a topology edge.
hgmpNTDPTopEntry	1.3.6.1.4.1.43.45.1.6.7.4.11.1		not-accessible
I32 hgmpNTDPTopHashIndex	1.3.6.1.4.1.43.45.1.6.7.4.11.1.1	Integer32	read-only	Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range.
INT hgmpNTDPTopLinkStatus	1.3.6.1.4.1.43.45.1.6.7.4.11.1.11	INTEGER	read-only	In STP or RSTP, it describes link status according to port STP steady status. In MSTP it describes STP steady status of the instance which management VLAN belongs to. Either 'hgmpNTDPTopEdgeStartPort' or 'hgmpNTDPTopEdgeEndPort' STP steady status is 'blocking', this object is 'blocking', otherwise is 'forwarding'. If STP or MSTP is disabled, this object is 'forwarding'.
hgmpNTDPTopTable	1.3.6.1.4.1.43.45.1.6.7.4.11		not-accessible	Access the topology structure collected by the NTDP.
I32 hgmpNTDPTOPTableChange	1.3.6.1.4.1.43.45.1.6.7.4.8	Integer32	read-only	Add 1 when the topology table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again.
hgmpProtocolMac	1.3.6.1.4.1.43.45.1.6.7.1.22
INT hgmpRun	1.3.6.1.4.1.43.45.1.6.7.1.19	INTEGER	read-write	Enable cluster on this switch.
INT hgmpSetVLANSecurity	1.3.6.1.4.1.43.45.1.6.7.1.1	INTEGER	read-write	Configure whether to perform the VLAN check inside the cluster.
IP hgmpSnmpHost	1.3.6.1.4.1.43.45.1.6.7.1.12	IpAddress	read-write	The Snmp Host to send the cluster trap packets, which can only be configured and accessed on the administrator switch.
hgmpStackEventsV2	1.3.6.1.4.1.43.45.1.6.7.2.0			Definition point for Stack notifications.
INT hgmpStackIpPoolLength	1.3.6.1.4.1.43.45.1.6.7.2.5	INTEGER	read-write	The length of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
IP hgmpStackIpPoolMask	1.3.6.1.4.1.43.45.1.6.7.2.10	IpAddress	read-write	The mask of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
IP hgmpStackIpPoolStartIP	1.3.6.1.4.1.43.45.1.6.7.2.4	IpAddress	read-write	The first address of the management IP network segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
OCT hgmpStackMainSwMac	1.3.6.1.4.1.43.45.1.6.7.2.9	OCTET STRING	read-only	The MAC address of main switch. It will be 00.00.00 when not be a member of stack.
INT hgmpStackMaxPoolNum	1.3.6.1.4.1.43.45.1.6.7.2.8	INTEGER	read-only	Max switch members in one stack that the switch support (include main switch).
OCT hgmpStackMemberDeviceId	1.3.6.1.4.1.43.45.1.6.7.2.6.1.1	OCTET STRING	read-only	2 bytes address type of the switch + 2 bytes zero + MAC address, expressed as a hexadecimal number string.
I32 hgmpStackMemberDisconCount	1.3.6.1.4.1.43.45.1.6.7.2.6.1.8	Integer32	read-only	Count of inside communication disconnection between the member switch and the master switch.
I32 hgmpStackMemberDisconRate	1.3.6.1.4.1.43.45.1.6.7.2.2	Integer32	read-only	Disconnection rate of the stack member switches.
I32 hgmpStackMemberEnrollTime	1.3.6.1.4.1.43.45.1.6.7.2.6.1.9	Integer32	read-only	Enrollment time of the member, measured in seconds.
hgmpStackMemberEntry	1.3.6.1.4.1.43.45.1.6.7.2.6.1		not-accessible
NTF hgmpStackMemberfailure	1.3.6.1.4.1.43.45.1.6.7.2.0.1			When a stack member failure, send a snmp trap to the network management.
IP hgmpStackMemberIpAddr	1.3.6.1.4.1.43.45.1.6.7.2.6.1.3	IpAddress	read-only	The private member IP address for the communication inside the stack.
OCT hgmpStackMemberName	1.3.6.1.4.1.43.45.1.6.7.2.6.1.4	OCTET STRING	read-only	Hostname of the member switch.
OCT hgmpStackMemberPassword	1.3.6.1.4.1.43.45.1.6.7.2.6.1.5	OCTET STRING	read-only	Member password for joining a stack.
OCT hgmpStackMemberPlatform	1.3.6.1.4.1.43.45.1.6.7.2.6.1.6	OCTET STRING	read-only	Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.
NTF hgmpStackMemberRecover	1.3.6.1.4.1.43.45.1.6.7.2.0.2			When a stack member Recover, send a snmp trap to the network management.
I32 hgmpStackMemberSerial	1.3.6.1.4.1.43.45.1.6.7.2.6.1.2	Integer32	read-only	When adding a member switch to the stack, the master switch will assign an unique integer to identify it.
INT hgmpStackMemberStatus	1.3.6.1.4.1.43.45.1.6.7.2.6.1.7	INTEGER	read-only	Member status on the master switch, use for displaying the network management status.
NTF hgmpStackMemberStatusChange	1.3.6.1.4.1.43.45.1.6.7.2.0.3			When a stack member status change, send a snmp trap to the network management.
hgmpStackMemberTable	1.3.6.1.4.1.43.45.1.6.7.2.6		not-accessible	Stack member table.
I32 hgmpStackMemberTableChange	1.3.6.1.4.1.43.45.1.6.7.2.1	Integer32	read-only	Change identifier of the stack member table.
INT hgmpStackRole	1.3.6.1.4.1.43.45.1.6.7.2.7	INTEGER	read-only	This switch's role status in stack.
IP hgmpTftpServer	1.3.6.1.4.1.43.45.1.6.7.1.11	IpAddress	read-write	The cluster members can access the Tftp Server through the administrator switch, which can only be configured and accessed on the administrator switch.
hgmpTopologyManagement	1.3.6.1.4.1.43.45.1.6.7.1.23
OCT hgmpWhitelistDeviceId	1.3.6.1.4.1.43.45.1.6.7.1.23.1.1.1	OCTET STRING	not-accessible	Unique identifier indicating a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
hgmpWhitelistEntry	1.3.6.1.4.1.43.45.1.6.7.1.23.1.1		not-accessible	Entry items
OCT hgmpWhitelistNbDeviceId	1.3.6.1.4.1.43.45.1.6.7.1.23.2.1.2	OCTET STRING	read-only	Unique identifier indicating a neighbor switch of a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
hgmpWhitelistNbEntry	1.3.6.1.4.1.43.45.1.6.7.1.23.2.1		not-accessible	Entry items
I32 hgmpWhitelistNbIndex	1.3.6.1.4.1.43.45.1.6.7.1.23.2.1.1	Integer32	not-accessible	Index of a switch which is the neighbor of a white list switch identified by 'hgmpWhitelistDeviceId'.
OCT hgmpWhitelistNbPortName	1.3.6.1.4.1.43.45.1.6.7.1.23.2.1.4	OCTET STRING	read-only	The name of the port which a neighbor device connects to the white list switch specified by 'hgmpWhitelistDeviceId'.
hgmpWhitelistNbTable	1.3.6.1.4.1.43.45.1.6.7.1.23.2		not-accessible	Cluster switches white list neighboring information table. White list neighbor table records all neighbor devices for every white list device. In fact, white list neighbor table displays the whole white list topology.
OCT hgmpWhitelistPortName	1.3.6.1.4.1.43.45.1.6.7.1.23.2.1.3	OCTET STRING	read-only	The name of the port which a white list switch connects to the neighbor specified by 'hgmpWhitelistNbIndex'.
ROW hgmpWhitelistRowStatus	1.3.6.1.4.1.43.45.1.6.7.1.23.1.1.3	RowStatus	read-create	The row status of this table.
I32 hgmpWhitelistSerial	1.3.6.1.4.1.43.45.1.6.7.1.23.1.1.2	Integer32	read-only	When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it. 0xffff means invalid value for this object.
hgmpWhitelistTable	1.3.6.1.4.1.43.45.1.6.7.1.23.1		not-accessible	Cluster switches white list table. White list topology is the topology which has been affirmed by network administrator in a cluster, and all devices in white list topology are recorded in this table. Against to white list table, black list table records the devices which are denied to join in cluster. Adding a black list device to white list table will cause a failure.
hwCluster	1.3.6.1.4.1.43.45.1.6.7			This MIB contains objects to manage the hgmp operations, which are used on lanswitch products.
hwClusterObject	1.3.6.1.4.1.43.45.1.6.7.1			This MIB contains objects to manage the cluster operations, which are used on lanswitch products.
I32 hwNDPAgingTime	1.3.6.1.4.1.43.45.1.6.7.5.3	Integer32	read-write	How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds.
C32 hwNDPChange	1.3.6.1.4.1.43.45.1.6.7.5.4	Counter32	read-only	Change identifier of the Neighbor table
I32 hwNDPHelloTimer	1.3.6.1.4.1.43.45.1.6.7.5.2	Integer32	read-write	NDP packet transmission interval, measured in seconds.
I32 hwNDPIfIndex	1.3.6.1.4.1.43.45.1.6.7.5.5.1.1	Integer32	read-only	Unique identifier of an interface of the device.
hwNDPObject	1.3.6.1.4.1.43.45.1.6.7.5			This MIB contains objects to manage the ndp operations, which are used on lanswitch products.
hwNDPPortEntry	1.3.6.1.4.1.43.45.1.6.7.5.5.1		not-accessible
I32 hwNDPPortNbAgingtime	1.3.6.1.4.1.43.45.1.6.7.5.6.1.9	Integer32	read-only	How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds.
OCT hwNDPPortNbBootromVer	1.3.6.1.4.1.43.45.1.6.7.5.6.1.7	OCTET STRING	read-only	Bootrom version. A null string indicates that the field was not included in the latest NDP packet.
OCT hwNDPPortNbDeviceId	1.3.6.1.4.1.43.45.1.6.7.5.6.1.1	OCTET STRING	read-only	2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
OCT hwNDPPortNbDeviceName	1.3.6.1.4.1.43.45.1.6.7.5.6.1.3	OCTET STRING	read-only	Device name. A null string indicates that the field was not included in the latest NDP packet.
hwNDPPortNbEntry	1.3.6.1.4.1.43.45.1.6.7.5.6.1		not-accessible
OCT hwNDPPortNbHardVer	1.3.6.1.4.1.43.45.1.6.7.5.6.1.6	OCTET STRING	read-only	Hardware version. A null string indicates that the field was not included in the latest NDP packet.
INT hwNDPPortNbPortMode	1.3.6.1.4.1.43.45.1.6.7.5.6.1.4	INTEGER	read-only	The neighbor port duplex mode.
OCT hwNDPPortNbPortName	1.3.6.1.4.1.43.45.1.6.7.5.6.1.2	OCTET STRING	read-only	Unique identifier of a port. A null string indicates that the field was not included in in the latest NDP packet. Interface type + card number / slot number / sequence number.
OCT hwNDPPortNbProductVer	1.3.6.1.4.1.43.45.1.6.7.5.6.1.5	OCTET STRING	read-only	Product version. A null string indicates that the field was not included in the latest NDP packet.
OCT hwNDPPortNbSoftVer	1.3.6.1.4.1.43.45.1.6.7.5.6.1.8	OCTET STRING	read-only	Software version. A null string indicates that the field was not included in the latest NDP packet.
hwNDPPortNbTable	1.3.6.1.4.1.43.45.1.6.7.5.6		not-accessible	NDP neighbor information on the switch.
INT hwNDPPortStatus	1.3.6.1.4.1.43.45.1.6.7.5.5.1.2	INTEGER	read-write	If it is enable, the device will send and receive the NDP packets via the interface. To disable the NDP function on the interface, set the entry as false.
hwNDPPortTable	1.3.6.1.4.1.43.45.1.6.7.5.5		not-accessible	Configure to enable/disable the interface NDP of the switch.
INT hwNDPStatus	1.3.6.1.4.1.43.45.1.6.7.5.1	INTEGER	read-write	NDP protocol module enable flag
hwNTDPObject	1.3.6.1.4.1.43.45.1.6.7.4			This MIB contains objects to manage the ntdp operations, which are used on lanswitch products.
hwStackObject	1.3.6.1.4.1.43.45.1.6.7.2			This MIB contains objects to manage the stack operations, which is used on lanswitch products.

RFC description

Manages HGMP cluster operations and network topology on Huawei LAN switch products.

Start monitoring H3C/3Com LAN switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download A3COM-HUAWEI-HGMP-MIB

What Is A3COM-HUAWEI-HGMP-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description