All MIBs › RAPID-CITY
Organization: Bay Networks, Rapid-City Group
Last Updated: 1997-01-01
Category: Bay Networks / Nortel, Routing, SMI / Registration
Description: Provides the base MIB framework for Bay Networks Rapid-City ERS switch management.
6,485 OIDs total — showing 3,039-6,078 (page 2 of 3)
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| INT rcDiagPcapAdvancedFilterToUdpPort | 1.3.6.1.4.1.2272.1.23.15.13.1.3 | INTEGER | read-write | To UdpPort. Used to specify a range |
| T/F rcDiagPcapAdvancedFilterIsInverseUdpPort | 1.3.6.1.4.1.2272.1.23.15.13.1.4 | TruthValue | read-write | UdpPort Inverse. when set the UdpPort otherthan specified range is matched |
| INT rcDiagPcapAdvancedFilterTcpPort | 1.3.6.1.4.1.2272.1.23.15.13.1.5 | INTEGER | read-write | TcpPort of the packet to be matched |
| INT rcDiagPcapAdvancedFilterToTcpPort | 1.3.6.1.4.1.2272.1.23.15.13.1.6 | INTEGER | read-write | To TcpPort. Used to specify a range |
| T/F rcDiagPcapAdvancedFilterIsInverseTcpPort | 1.3.6.1.4.1.2272.1.23.15.13.1.7 | TruthValue | read-write | TcpPort Inverse. when set the TcpPort otherthan specified range is matched |
| STR rcDiagPcapAdvancedFilterUserDefinedData | 1.3.6.1.4.1.2272.1.23.15.13.1.8 | DisplayString | read-write | User defined data to match with the packets received |
| INT rcDiagPcapAdvancedFilterUserDefinedDataSize | 1.3.6.1.4.1.2272.1.23.15.13.1.9 | INTEGER | read-write | Length of user defined data |
| INT rcDiagPcapAdvancedFilterUserDefinedOffset | 1.3.6.1.4.1.2272.1.23.15.13.1.10 | INTEGER | read-write | Offset from which match has to start |
| T/F rcDiagPcapAdvancedFilterIsInverseUserDefined | 1.3.6.1.4.1.2272.1.23.15.13.1.11 | TruthValue | read-write | TcpPort Inverse. when set the Userdata otherthan specified is matched |
| INT rcDiagPcapAdvancedFilterTimer | 1.3.6.1.4.1.2272.1.23.15.13.1.12 | INTEGER | read-write | Timer to start the pcap capture window in ms |
| INT rcDiagPcapAdvancedFilterPacketCount | 1.3.6.1.4.1.2272.1.23.15.13.1.13 | INTEGER | read-write | Number of packets to be captured before disabling pcap |
| INT rcDiagPcapAdvancedFilterRefreshTimer | 1.3.6.1.4.1.2272.1.23.15.13.1.14 | INTEGER | read-write | Refresh timer in ms |
| ROW rcDiagPcapAdvancedFilterRowStatus | 1.3.6.1.4.1.2272.1.23.15.13.1.15 | RowStatus | read-write | RowStatus |
| STR rcDiagPcapCopyFileName | 1.3.6.1.4.1.2272.1.23.15.14 | DisplayString | read-write | Used to indicate the file name. When set, the PCAP data from PCAP engine RAM is stored into this file in PCAP engine |
| INT rcDiagPcapResetStat | 1.3.6.1.4.1.2272.1.23.15.15 | INTEGER | read-write | To Reset PCAP statistics |
| STR rcDiagPcapStatPacketCapacityCount | 1.3.6.1.4.1.2272.1.23.15.16 | DisplayString | read-only | Packet Capacity Count |
| STR rcDiagPcapStatNumberOfPacketsReceived | 1.3.6.1.4.1.2272.1.23.15.17 | DisplayString | read-only | Number of packets received in PCAP engine |
| STR rcDiagPcapStatNumberOfPacketsAccumulated | 1.3.6.1.4.1.2272.1.23.15.18 | DisplayString | read-only | Number of packets captured in PCAP engine |
| STR rcDiagPcapStatNumberOfPacketsDroppedInPcapEngine | 1.3.6.1.4.1.2272.1.23.15.19 | DisplayString | read-only | Number of packets dropped in PCAP engine by filters |
| STR rcDiagPcapStatNumberOfPacketsDroppedInHardware | 1.3.6.1.4.1.2272.1.23.15.20 | DisplayString | read-only | Number of packets dropped in Hardware |
| T/F rcDiagPcapDataValid | 1.3.6.1.4.1.2272.1.23.15.21 | TruthValue | read-only | A true/false value that indicate the return data whether is valid. |
| INT rcDiagPcapEtherTypeForSvlanLevel | 1.3.6.1.4.1.2272.1.23.15.22 | INTEGER | read-write | EtherType of svlan level. |
| rcIpx | 1.3.6.1.4.1.2272.1.24 | |||
| T/F rcIpxRoutingEnable | 1.3.6.1.4.1.2272.1.24.1 | TruthValue | read-write | Global Ipx Routing control variable |
| rcIpxAddrTable | 1.3.6.1.4.1.2272.1.24.2 | not-accessible | The table of addressing information relevant to this entity's IPX addresses. This table is used for associating IfIndex and IPX network number. | |
| rcIpxAddrEntry | 1.3.6.1.4.1.2272.1.24.2.1 | not-accessible | The addressing information for one of this entity's IP addresses. | |
| INT rcIpxAddrVlanId | 1.3.6.1.4.1.2272.1.24.2.1.1 | INTEGER | read-write | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| OCT rcIpxAddrNetAddr | 1.3.6.1.4.1.2272.1.24.2.1.2 | OCTET STRING | read-write | IPX Network address. |
| INT rcIpxAddrEncap | 1.3.6.1.4.1.2272.1.24.2.1.3 | INTEGER | read-write | Specify IPX encapsulation format. It is relevent if the VLAN is port based. But it's always nice to have it. |
| ROW rcIpxAddrEntryStatus | 1.3.6.1.4.1.2272.1.24.2.1.4 | RowStatus | read-write | Used to create/delete entries in the rcIpxAddrEntry. |
| INT rcIpxAddrTicks | 1.3.6.1.4.1.2272.1.24.2.1.5 | INTEGER | read-write | The tick value gets updated to the routing table when an ipx address is being assigned to a vlan. |
| I32 rcIpxPolicyNetTableSize | 1.3.6.1.4.1.2272.1.24.3 | Integer32 | read-only | Used to indicate the number of entries in the table. |
| rcIpxPolicyNetTable | 1.3.6.1.4.1.2272.1.24.4 | not-accessible | Net Table is used to store the IPX network address range. This entry is used for Net List Table. | |
| rcIpxPolicyNetEntry | 1.3.6.1.4.1.2272.1.24.4.1 | not-accessible | table entry. | |
| I32 rcIpxPolicyNetId | 1.3.6.1.4.1.2272.1.24.4.1.1 | Integer32 | read-write | Unique ID to represent the entry in the table. |
| OCT rcIpxPolicyNetFromNet | 1.3.6.1.4.1.2272.1.24.4.1.2 | OCTET STRING | read-write | IPX Network Address. |
| OCT rcIpxPolicyNetToNet | 1.3.6.1.4.1.2272.1.24.4.1.3 | OCTET STRING | read-write | This is used to specify a range of IPX network addresses. This is an optional parameter. The default value is NetAddr. In that case the entry refers to a single IPX network. |
| STR rcIpxPolicyNetName | 1.3.6.1.4.1.2272.1.24.4.1.4 | DisplayString | read-write | Unique Name to represent the entry in the table. Id & Name have one-to-one relationship. |
| ROW rcIpxPolicyNetRowStatus | 1.3.6.1.4.1.2272.1.24.4.1.5 | RowStatus | read-write | . |
| I32 rcIpxPolicyServTableSize | 1.3.6.1.4.1.2272.1.24.5 | Integer32 | read-only | Used to indicate the number of entries in the table. |
| rcIpxPolicyServTable | 1.3.6.1.4.1.2272.1.24.6 | not-accessible | Service Table is used to store Service Type and Service Name. This is used only for SAP Updates. | |
| rcIpxPolicyServEntry | 1.3.6.1.4.1.2272.1.24.6.1 | not-accessible | table entry. | |
| I32 rcIpxPolicyServId | 1.3.6.1.4.1.2272.1.24.6.1.1 | Integer32 | read-only | Used to store the service Id. |
| INT rcIpxPolicyServServiceType | 1.3.6.1.4.1.2272.1.24.6.1.2 | INTEGER | read-only | Used to store the service type. |
| STR rcIpxPolicyServServiceName | 1.3.6.1.4.1.2272.1.24.6.1.3 | DisplayString | read-only | Used to store the service Name. This is an optional parameter. If not entered, '*' is taken as default value. This is matched to any service name. Also, '*' can be used to match wildcard characters. This is supported only at the end of the service name. For Eg: Printer* will be matched to Printer1, Printer2, Printer123 etc. Service Name matching is CASE SENSITIVE |
| STR rcIpxPolicyServName | 1.3.6.1.4.1.2272.1.24.6.1.4 | DisplayString | read-write | Used to store the entry name. Id & Name have one-to-one relationship. |
| ROW rcIpxPolicyServRowStatus | 1.3.6.1.4.1.2272.1.24.6.1.5 | RowStatus | read-write | . |
| I32 rcIpxPolicyListTableSize | 1.3.6.1.4.1.2272.1.24.7 | Integer32 | read-only | Used to indicate the number of entries in the table. |
| rcIpxPolicyListTable | 1.3.6.1.4.1.2272.1.24.8 | not-accessible | PolicyList Table is used to store generic policies that can be used by both RIP and SAP as their in/out policies. | |
| rcIpxPolicyListEntry | 1.3.6.1.4.1.2272.1.24.8.1 | not-accessible | table entry. | |
| INT rcIpxPolicyListId | 1.3.6.1.4.1.2272.1.24.8.1.1 | INTEGER | read-only | Index used to uniquely Identify a group of policies in the route policy table. |
| INT rcIpxPolicyListSeqnum | 1.3.6.1.4.1.2272.1.24.8.1.2 | INTEGER | read-only | Second Index used to identify a specific policy with in the route policy group (grouped by Id). This field allows users to specify different MATCH, SET parameters and an action. Also used to resolve the tie between 2 matching policies. The policy with lower sequence number is used. |
| STR rcIpxPolicyListName | 1.3.6.1.4.1.2272.1.24.8.1.3 | DisplayString | read-write | Is used to group a set of policies with different sequence number. Id & Name have one-to-one relationship Different policy groups can have same sequence number, whereas with in a group the sequence must be different. |
| T/F rcIpxPolicyListEnable | 1.3.6.1.4.1.2272.1.24.8.1.4 | TruthValue | read-write | value specified here indicates whether the policy is enabled or not. If disabled, the policy should not be used. |
| INT rcIpxPolicyListAction | 1.3.6.1.4.1.2272.1.24.8.1.5 | INTEGER | read-write | This determines what to do with the RIP/SAP packet. If the value is 'permit', then only in or out the packet. Otherwise, drop the packet. |
| INT rcIpxPolicyListRouteSource | 1.3.6.1.4.1.2272.1.24.8.1.6 | INTEGER | read-write | Used to specify the Route Source of the route Packet. This field is used only for announce policies. For accept policies, this field is ignored. Value is one of multiple (logical 'OR') of following values: direct(1), nlsp(2), rip(4), static(8), any(15) |
| STR rcIpxPolicyListMatchNetList | 1.3.6.1.4.1.2272.1.24.8.1.7 | DisplayString | read-write | List of networks to which this policy is applied. The Network List Name is entered. When this is not referring to any list or the Net List Table to which it is pointing to is empty, then THIS POLICY MATCHES ALL NETWORK ADDRESSES. |
| STR rcIpxPolicyListMatchServList | 1.3.6.1.4.1.2272.1.24.8.1.8 | DisplayString | read-write | List of service types and Service Names to which this policy is applied. The Service List name is entered. This field is used only for SAP out/in policies. For, RIP policies, this field is discarded. When this is not referring to any list or the Service List Table to which it is pointing to is empty, then this POLICY MATCHES ALL SERVICE TYPE AND SERVICE NAME. |
| INT rcIpxPolicyListHops | 1.3.6.1.4.1.2272.1.24.8.1.9 | INTEGER | read-write | This value is used as Hop count for out policies. If this field is 0, then Hop count is not modified. The default value is '0'. This field is also applicable only for Out Policies. |
| INT rcIpxPolicyListTicks | 1.3.6.1.4.1.2272.1.24.8.1.10 | INTEGER | read-write | The tick value which will be updated for RIP when the routing method is tick. |
| ROW rcIpxPolicyListRowStatus | 1.3.6.1.4.1.2272.1.24.8.1.11 | RowStatus | read-write | . |
| I32 rcIpxRipOutFilterTableSize | 1.3.6.1.4.1.2272.1.24.9 | Integer32 | read-only | Used to indicate the number of entries in the table. |
| rcIpxRipOutFilterTable | 1.3.6.1.4.1.2272.1.24.10 | not-accessible | RipOutFilter Table is used to store generic policies that can be used by both RIP and SAP as their in/out policies. | |
| rcIpxRipOutFilterEntry | 1.3.6.1.4.1.2272.1.24.10.1 | not-accessible | table entry. | |
| OCT rcIpxRipOutFilterInterface | 1.3.6.1.4.1.2272.1.24.10.1.1 | OCTET STRING | read-write | IPX Network address. The interface to which the policy is applied. |
| STR rcIpxRipOutFilterPolicyName | 1.3.6.1.4.1.2272.1.24.10.1.2 | DisplayString | read-write | The name of the policy group to which this entry refers. |
| ROW rcIpxRipOutFilterRowStatus | 1.3.6.1.4.1.2272.1.24.10.1.3 | RowStatus | read-write | . |
| I32 rcIpxSapOutFilterTableSize | 1.3.6.1.4.1.2272.1.24.11 | Integer32 | read-only | Used to indicate the number of entries in the table. |
| rcIpxSapOutFilterTable | 1.3.6.1.4.1.2272.1.24.12 | not-accessible | SapOutFilter Table is used to store generic policies that can be used by both RIP and SAP as their in/out policies. | |
| rcIpxSapOutFilterEntry | 1.3.6.1.4.1.2272.1.24.12.1 | not-accessible | table entry. | |
| OCT rcIpxSapOutFilterInterface | 1.3.6.1.4.1.2272.1.24.12.1.1 | OCTET STRING | read-write | IPX Network address. The interface to which the policy is applied. |
| STR rcIpxSapOutFilterPolicyName | 1.3.6.1.4.1.2272.1.24.12.1.2 | DisplayString | read-write | The name of the policy group to which this entry refers. |
| ROW rcIpxSapOutFilterRowStatus | 1.3.6.1.4.1.2272.1.24.12.1.3 | RowStatus | read-write | . |
| I32 rcIpxRipInFilterTableSize | 1.3.6.1.4.1.2272.1.24.13 | Integer32 | read-only | Used to indicate the number of entries in the table. |
| rcIpxRipInFilterTable | 1.3.6.1.4.1.2272.1.24.14 | not-accessible | RipInFilter Table is used to store generic policies that can be used by both RIP and SAP as their in/out policies. | |
| rcIpxRipInFilterEntry | 1.3.6.1.4.1.2272.1.24.14.1 | not-accessible | table entry. | |
| OCT rcIpxRipInFilterInterface | 1.3.6.1.4.1.2272.1.24.14.1.1 | OCTET STRING | read-write | IPX Network address. The interface to which the policy is applied. |
| STR rcIpxRipInFilterPolicyName | 1.3.6.1.4.1.2272.1.24.14.1.2 | DisplayString | read-write | The name of the policy group to which this entry refers. |
| ROW rcIpxRipInFilterRowStatus | 1.3.6.1.4.1.2272.1.24.14.1.3 | RowStatus | read-write | . |
| I32 rcIpxSapInFilterTableSize | 1.3.6.1.4.1.2272.1.24.15 | Integer32 | read-only | Used to indicate the number of entries in the table. |
| rcIpxSapInFilterTable | 1.3.6.1.4.1.2272.1.24.16 | not-accessible | SapInFilter Table is used to store generic policies that can be used by both RIP and SAP as their in/out policies. | |
| rcIpxSapInFilterEntry | 1.3.6.1.4.1.2272.1.24.16.1 | not-accessible | table entry. | |
| OCT rcIpxSapInFilterInterface | 1.3.6.1.4.1.2272.1.24.16.1.1 | OCTET STRING | read-write | IPX Network address. The interface to which the policy is applied. |
| STR rcIpxSapInFilterPolicyName | 1.3.6.1.4.1.2272.1.24.16.1.2 | DisplayString | read-write | The name of the policy group to which this entry refers. |
| ROW rcIpxSapInFilterRowStatus | 1.3.6.1.4.1.2272.1.24.16.1.3 | RowStatus | read-write | . |
| INT rcIpxRoutingMethod | 1.3.6.1.4.1.2272.1.24.17 | INTEGER | read-write | This global variable is referenced each time a decision has to be taken |
| rcIpxSapInterfaceTable | 1.3.6.1.4.1.2272.1.24.18 | not-accessible | SapInterface Table is used to store generic policies that can be used by SAP as their in/out policies. | |
| rcIpxSapInterfaceEntry | 1.3.6.1.4.1.2272.1.24.18.1 | not-accessible | table entry. | |
| OCT rcIpxSapInterfaceNetNum | 1.3.6.1.4.1.2272.1.24.18.1.1 | OCTET STRING | read-only | IPX Network address. The interface to which the policy is applied. |
| STR rcIpxSapInterfaceInPolicy | 1.3.6.1.4.1.2272.1.24.18.1.2 | DisplayString | read-write | The name of the in filter group to which this entry refers. |
| STR rcIpxSapInterfaceOutPolicy | 1.3.6.1.4.1.2272.1.24.18.1.3 | DisplayString | read-write | The name of the out filter to which this entry refers. |
| rcIpxRipInterfaceTable | 1.3.6.1.4.1.2272.1.24.19 | not-accessible | RipInterface Table is used to store generic policies that can be used by RIP as their in/out policies. | |
| rcIpxRipInterfaceEntry | 1.3.6.1.4.1.2272.1.24.19.1 | not-accessible | table entry. | |
| OCT rcIpxRipInterfaceNetNum | 1.3.6.1.4.1.2272.1.24.19.1.1 | OCTET STRING | read-only | IPX Network address. The interface to which the policy is applied. |
| STR rcIpxRipInterfaceInPolicy | 1.3.6.1.4.1.2272.1.24.19.1.2 | DisplayString | read-write | The name of the in filter group to which this entry refers. |
| STR rcIpxRipInterfaceOutPolicy | 1.3.6.1.4.1.2272.1.24.19.1.3 | DisplayString | read-write | The name of the out filter to which this entry refers. |
| rcIpxBrouterTable | 1.3.6.1.4.1.2272.1.24.20 | not-accessible | The table of addressing information relevant to this entity's IPX addresses. This table is used for associating IfIndex and IPX network number. | |
| rcIpxBrouterEntry | 1.3.6.1.4.1.2272.1.24.20.1 | not-accessible | The addressing information for one of this entity's IP addresses. | |
| I32 rcIpxBrouterPortIndex | 1.3.6.1.4.1.2272.1.24.20.1.1 | Integer32 | read-only | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| INT rcIpxBrouterVlanId | 1.3.6.1.4.1.2272.1.24.20.1.2 | INTEGER | read-only | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the sam2 value of ifIndex. |
| OCT rcIpxBrouterNetAddr | 1.3.6.1.4.1.2272.1.24.20.1.3 | OCTET STRING | read-only | IPX Network address. |
| INT rcIpxBrouterEncap | 1.3.6.1.4.1.2272.1.24.20.1.4 | INTEGER | read-only | Specify IPX encapsulation format. It is relevent if the VLAN is port based. But it's always nice to have it. |
| INT rcIpxBrouterMacOffset | 1.3.6.1.4.1.2272.1.24.20.1.5 | INTEGER | read-write | IPX Network address. |
| INT rcIpxBrouterTicks | 1.3.6.1.4.1.2272.1.24.20.1.6 | INTEGER | read-write | The tick value gets updated to the routing table when an ipx address is being assigned to a vlan. |
| ROW rcIpxBrouterRowStatus | 1.3.6.1.4.1.2272.1.24.20.1.7 | RowStatus | read-write | Used to create/delete entries in the rcIpxBrouterEntry. |
| rcIpxRsmlt | 1.3.6.1.4.1.2272.1.24.21 | |||
| rcIpxRsmltGlobal | 1.3.6.1.4.1.2272.1.24.21.1 | |||
| I32 rcIpxRsmltGlobalTableSize | 1.3.6.1.4.1.2272.1.24.21.1.1 | Integer32 | read-only | Route Smlt table size. |
| rcIpxRsmltOperTable | 1.3.6.1.4.1.2272.1.24.21.2 | not-accessible | Route Smlt Table | |
| rcIpxRsmltOperEntry | 1.3.6.1.4.1.2272.1.24.21.2.1 | not-accessible | An entry of Ip As Path Access List Table. | |
| INT rcIpxRsmltOperVlanId | 1.3.6.1.4.1.2272.1.24.21.2.1.1 | INTEGER | read-only | Vlan id. |
| NUM rcIpxRsmltOperIfIndex | 1.3.6.1.4.1.2272.1.24.21.2.1.2 | InterfaceIndex | read-only | Route Smlt Oper IfIndex. |
| T/F rcIpxRsmltOperAdminStatus | 1.3.6.1.4.1.2272.1.24.21.2.1.3 | TruthValue | read-write | is a enable/disable flag. |
| INT rcIpxRsmltOperHoldDownTimer | 1.3.6.1.4.1.2272.1.24.21.2.1.4 | INTEGER | read-write | Timer value, the range of value is from 0 to 3600. |
| INT rcIpxRsmltOperHoldDownTimeRemaining | 1.3.6.1.4.1.2272.1.24.21.2.1.5 | INTEGER | read-only | The time value that indicate how much time remaining of HoldDownTimer. |
| INT rcIpxRsmltOperHoldUpTimer | 1.3.6.1.4.1.2272.1.24.21.2.1.6 | INTEGER | read-write | The range of value 0 to 3600 or 9999. 9999 means infinity. |
| INT rcIpxRsmltOperHoldUpTimeRemaining | 1.3.6.1.4.1.2272.1.24.21.2.1.7 | INTEGER | read-only | The time value that indicate how much time remaining of HoldUpTimer. |
| INT rcIpxRsmltOperOperStatus | 1.3.6.1.4.1.2272.1.24.21.2.1.8 | INTEGER | read-only | The operation status of Rsmlt, up or down. |
| IDL rcIpxRsmltOperSmltId | 1.3.6.1.4.1.2272.1.24.21.2.1.9 | IdList | read-only | The id range for SMLT is 1-32. |
| IDL rcIpxRsmltOperSltId | 1.3.6.1.4.1.2272.1.24.21.2.1.10 | IdList | read-only | The id range for SLT is 1-512. |
| ROW rcIpxRsmltOperRowStatus | 1.3.6.1.4.1.2272.1.24.21.2.1.11 | RowStatus | read-write | Row Status. |
| MAC rcIpxRsmltOperMacAddr | 1.3.6.1.4.1.2272.1.24.21.2.1.12 | MacAddress | read-only | Mac Address. |
| rcIpxRsmltPeerTable | 1.3.6.1.4.1.2272.1.24.21.3 | not-accessible | Route Smlt Table | |
| rcIpxRsmltPeerEntry | 1.3.6.1.4.1.2272.1.24.21.3.1 | not-accessible | An entry of Ip As Path Access List Table. | |
| INT rcIpxRsmltPeerVlanId | 1.3.6.1.4.1.2272.1.24.21.3.1.1 | INTEGER | read-only | Vlan id. |
| NUM rcIpxRsmltPeerIfIndex | 1.3.6.1.4.1.2272.1.24.21.3.1.2 | InterfaceIndex | read-only | Route Smlt Oper IfIndex. |
| T/F rcIpxRsmltPeerAdminStatus | 1.3.6.1.4.1.2272.1.24.21.3.1.3 | TruthValue | read-only | is a enable/disable flag. |
| INT rcIpxRsmltPeerHoldDownTimer | 1.3.6.1.4.1.2272.1.24.21.3.1.4 | INTEGER | read-only | Timer value, the range of value is from 0 to 3600. |
| INT rcIpxRsmltPeerHoldDownTimeRemaining | 1.3.6.1.4.1.2272.1.24.21.3.1.5 | INTEGER | read-only | The time value that indicate how much time remaining of HoldDownTimer. |
| INT rcIpxRsmltPeerHoldUpTimer | 1.3.6.1.4.1.2272.1.24.21.3.1.6 | INTEGER | read-only | The range of value 0 to 3600 or 9999. 9999 means infinity. |
| INT rcIpxRsmltPeerHoldUpTimeRemaining | 1.3.6.1.4.1.2272.1.24.21.3.1.7 | INTEGER | read-only | The time value that indicate how much time remaining of HoldUpTimer. |
| INT rcIpxRsmltPeerOperStatus | 1.3.6.1.4.1.2272.1.24.21.3.1.8 | INTEGER | read-only | The operation status of Rsmlt, up or down. |
| IDL rcIpxRsmltPeerSmltId | 1.3.6.1.4.1.2272.1.24.21.3.1.9 | IdList | read-only | The id range for SMLT is 1-32. |
| IDL rcIpxRsmltPeerSltId | 1.3.6.1.4.1.2272.1.24.21.3.1.10 | IdList | read-only | The id range for SLT is 1-512. |
| MAC rcIpxRsmltPeerMacAddr | 1.3.6.1.4.1.2272.1.24.21.3.1.11 | MacAddress | read-only | Mac Address. |
| rcIpxRipGlobal | 1.3.6.1.4.1.2272.1.24.22 | |||
| I32 rcIpxRipGlobalPace | 1.3.6.1.4.1.2272.1.24.22.1 | Integer32 | read-write | The maximum pace, in packets per second, at which RIP packets may be sent on this circuit. |
| I32 rcIpxRipGlobalUpdate | 1.3.6.1.4.1.2272.1.24.22.2 | Integer32 | read-write | The RIP periodic update interval, in seconds. |
| I32 rcIpxRipGlobalAgeMultiplier | 1.3.6.1.4.1.2272.1.24.22.3 | Integer32 | read-write | The holding multiplier for information received in RIP periodic updates. |
| rcPos | 1.3.6.1.4.1.2272.1.26 | |||
| rcPosPppIpxTable | 1.3.6.1.4.1.2272.1.26.1 | not-accessible | ||
| rcPosPppIpxEntry | 1.3.6.1.4.1.2272.1.26.1.1 | not-accessible | ||
| NUM rcPosPppIpxIfIndex | 1.3.6.1.4.1.2272.1.26.1.1.1 | InterfaceIndex | read-only | port number. |
| INT rcPosPppIpxIpxcpAdminStatus | 1.3.6.1.4.1.2272.1.26.1.1.2 | INTEGER | read-write | |
| INT rcPosPppIpxOperStatus | 1.3.6.1.4.1.2272.1.26.1.1.3 | INTEGER | read-only | |
| OCT rcPosPppIpxNetAddr | 1.3.6.1.4.1.2272.1.26.1.1.4 | OCTET STRING | read-write | IPX Network address. |
| INT rcPosPppIpxRoutingProtocol | 1.3.6.1.4.1.2272.1.26.1.1.5 | INTEGER | read-write | |
| rcPosSonetTable | 1.3.6.1.4.1.2272.1.26.2 | not-accessible | ||
| rcPosSonetEntry | 1.3.6.1.4.1.2272.1.26.2.1 | not-accessible | ||
| NUM rcPosSonetIndex | 1.3.6.1.4.1.2272.1.26.2.1.1 | InterfaceIndex | read-only | pos ifIndex. |
| INT rcPosSonetFraming | 1.3.6.1.4.1.2272.1.26.2.1.2 | INTEGER | read-write | |
| INT rcPosSonetSectionTrace | 1.3.6.1.4.1.2272.1.26.2.1.3 | INTEGER | read-write | config. J0 byte |
| INT rcPosSonetSectionGrowth | 1.3.6.1.4.1.2272.1.26.2.1.4 | INTEGER | read-write | config. Z0 byte |
| INT rcPosSonetSyncronization | 1.3.6.1.4.1.2272.1.26.2.1.5 | INTEGER | read-write | config. S1 byte |
| OCT rcPosSonetStsPathTrace | 1.3.6.1.4.1.2272.1.26.2.1.6 | OCTET STRING | read-write | config. 64/16 byte. |
| INT rcPosSonetPathSignalLabel | 1.3.6.1.4.1.2272.1.26.2.1.7 | INTEGER | read-write | config. C2 byte |
| INT rcPosSonetClockSource | 1.3.6.1.4.1.2272.1.26.2.1.8 | INTEGER | read-write | |
| ENA rcPosSonetScramble | 1.3.6.1.4.1.2272.1.26.2.1.9 | EnableValue | read-write | |
| I32 rcPosSonetOperStatusFraming | 1.3.6.1.4.1.2272.1.26.2.1.10 | Integer32 | read-only | |
| I32 rcPosSonetOperStatusClockSource | 1.3.6.1.4.1.2272.1.26.2.1.11 | Integer32 | read-only | |
| ENA rcPosSonetOperStatusScramble | 1.3.6.1.4.1.2272.1.26.2.1.12 | EnableValue | read-only | |
| I32 rcPosSonetOperStatusSectionTrace | 1.3.6.1.4.1.2272.1.26.2.1.13 | Integer32 | read-only | |
| I32 rcPosSonetOperStatusPathSignalLabel | 1.3.6.1.4.1.2272.1.26.2.1.14 | Integer32 | read-only | |
| rcPosLineStatusTable | 1.3.6.1.4.1.2272.1.26.3 | not-accessible | Pos Line Status Table | |
| rcPosLineStatusEntry | 1.3.6.1.4.1.2272.1.26.3.1 | not-accessible | Entry containing infomation of Pos Line Status. | |
| NUM rcPosLineStatusIndex | 1.3.6.1.4.1.2272.1.26.3.1.1 | InterfaceIndex | read-only | pos ifIndex, same as rcPosPppIpxIfIndex. |
| MAC rcPosLineStatusLocalMACAddress | 1.3.6.1.4.1.2272.1.26.3.1.2 | MacAddress | read-only | current local MAC address |
| MAC rcPosLineStatusRemoteMACAddress | 1.3.6.1.4.1.2272.1.26.3.1.3 | MacAddress | read-only | current remote MAC address |
| IP rcPosLineStatusLocalIpAddr | 1.3.6.1.4.1.2272.1.26.3.1.4 | IpAddress | read-only | current local ip addr |
| IP rcPosLineStatusRemoteIpAddr | 1.3.6.1.4.1.2272.1.26.3.1.5 | IpAddress | read-only | current remote ip addr |
| I32 rcPosLineStatusOutQuality | 1.3.6.1.4.1.2272.1.26.3.1.6 | Integer32 | read-only | current output quality. |
| I32 rcPosLineStatusLocalPeriod | 1.3.6.1.4.1.2272.1.26.3.1.7 | Integer32 | read-only | |
| I32 rcPosLineStatusDeviceType | 1.3.6.1.4.1.2272.1.26.3.1.8 | Integer32 | read-only | |
| I32 rcPosLineStatusDeviceRev | 1.3.6.1.4.1.2272.1.26.3.1.9 | Integer32 | read-only | |
| I32 rcPosLineStatusIpxRoutingProtocol | 1.3.6.1.4.1.2272.1.26.3.1.10 | Integer32 | read-only | |
| rcPosLineConfigTable | 1.3.6.1.4.1.2272.1.26.4 | not-accessible | Pos Line Config Table | |
| rcPosLineConfigEntry | 1.3.6.1.4.1.2272.1.26.4.1 | not-accessible | Entry containing infomation of Pos Line Config. | |
| NUM rcPosLineConfigIndex | 1.3.6.1.4.1.2272.1.26.4.1.1 | InterfaceIndex | read-only | pos ifIndex, same as rcPosPppIpxIfIndex. |
| MAC rcPosLineConfigLocalMACAddress | 1.3.6.1.4.1.2272.1.26.4.1.2 | MacAddress | read-write | current local MAC address |
| MAC rcPosLineConfigRemoteMACAddress | 1.3.6.1.4.1.2272.1.26.4.1.3 | MacAddress | read-write | current remote MAC address |
| IP rcPosLineConfigLocalIpAddr | 1.3.6.1.4.1.2272.1.26.4.1.4 | IpAddress | read-write | current local ip addr |
| IP rcPosLineConfigRemoteIpAddr | 1.3.6.1.4.1.2272.1.26.4.1.5 | IpAddress | read-write | current remote ip addr |
| INT rcPosLineConfigRemoteReportPeriod | 1.3.6.1.4.1.2272.1.26.4.1.6 | INTEGER | read-write | config. remote report period. |
| INT rcPosLineConfigLqrThreshold | 1.3.6.1.4.1.2272.1.26.4.1.7 | INTEGER | read-write | config. input quality. |
| I32 rcPosLineConfigOutQuality | 1.3.6.1.4.1.2272.1.26.4.1.8 | Integer32 | read-write | config. output quality. |
| ENA rcPosLineConfigPppStp | 1.3.6.1.4.1.2272.1.26.4.1.9 | EnableValue | read-write | STP PPP encoding enable T/F |
| T/F rcPosLineConfigLoopBack | 1.3.6.1.4.1.2272.1.26.4.1.10 | TruthValue | read-write | perform loop-back. |
| MAC rcPosLineConfigIpxVlanMacAddress | 1.3.6.1.4.1.2272.1.26.4.1.11 | MacAddress | read-write | |
| MAC rcPosLineConfigIpxRemoteMacAddress | 1.3.6.1.4.1.2272.1.26.4.1.12 | MacAddress | read-write | |
| rcPosSonetTrap | 1.3.6.1.4.1.2272.1.26.5 | |||
| INT rcPosSonetTrapType | 1.3.6.1.4.1.2272.1.26.5.1 | INTEGER | read-only | Used to indicate a particular type of Sonet trap. |
| INT rcPosSonetTrapIndication | 1.3.6.1.4.1.2272.1.26.5.2 | INTEGER | read-only | Used to indicate an indication for a Sonet trap. |
| rcPosSioCardConfigTable | 1.3.6.1.4.1.2272.1.26.6 | not-accessible | Pos Sio Card Config Table | |
| rcPosSioCardConfigEntry | 1.3.6.1.4.1.2272.1.26.6.1 | not-accessible | Entry containing infomation of Pos Sio Card Config. | |
| I32 rcPosSioCardConfigSlotIndex | 1.3.6.1.4.1.2272.1.26.6.1.1 | Integer32 | read-only | slot Index. |
| INT rcPosSioCardConfigAction | 1.3.6.1.4.1.2272.1.26.6.1.2 | INTEGER | read-write | |
| INT rcPosSioCardConfigTraceMode | 1.3.6.1.4.1.2272.1.26.6.1.3 | INTEGER | read-write | |
| STR rcPosSioCardConfigImageFileName | 1.3.6.1.4.1.2272.1.26.6.1.4 | DisplayString | read-only | POS Image file name. |
| rcPosOperStatusTable | 1.3.6.1.4.1.2272.1.26.7 | not-accessible | ||
| rcPosOperStatusEntry | 1.3.6.1.4.1.2272.1.26.7.1 | not-accessible | ||
| NUM rcPosOperStatusIndex | 1.3.6.1.4.1.2272.1.26.7.1.1 | InterfaceIndex | read-only | pos ifIndex. |
| I32 rcPosOperStatusLqrStatus | 1.3.6.1.4.1.2272.1.26.7.1.2 | Integer32 | read-only | Operational status of pppLqrConfigStatus. |
| I32 rcPosOperStatusLineLqrThreshold | 1.3.6.1.4.1.2272.1.26.7.1.3 | Integer32 | read-only | . |
| I32 rcPosOperStatusLinkMagicNumber | 1.3.6.1.4.1.2272.1.26.7.1.4 | Integer32 | read-only | . |
| ENA rcPosOperStatusLinePppStp | 1.3.6.1.4.1.2272.1.26.7.1.5 | EnableValue | read-only | |
| rcLinkFlapDetect | 1.3.6.1.4.1.2272.1.27 | |||
| T/F rcLinkFlapDetectAutoPortDownEnable | 1.3.6.1.4.1.2272.1.27.1 | TruthValue | read-write | Used to enable/disable the Link Flap Detect feature. When enabled this feature will monitor the number of times a port goes down during a certain interval. If the number exceeds a given bound the port will be forced out-of-service. |
| T/F rcLinkFlapDetectSendTrap | 1.3.6.1.4.1.2272.1.27.2 | TruthValue | read-write | Used to configure whether a trap should be sent if the port is forced out-of-service. |
| INT rcLinkFlapDetectFrequency | 1.3.6.1.4.1.2272.1.27.3 | INTEGER | read-write | Used to configure the number of times the port can go down. |
| INT rcLinkFlapDetectInterval | 1.3.6.1.4.1.2272.1.27.4 | INTEGER | read-write | Used to configure the interval (in minutes). |
| rcV1Traps | 1.3.6.1.4.1.2272.1.28 | |||
| rcRadius | 1.3.6.1.4.1.2272.1.29 | |||
| rcRadiusGlobal | 1.3.6.1.4.1.2272.1.29.1 | |||
| T/F rcRadiusGlobalEnable | 1.3.6.1.4.1.2272.1.29.1.1 | TruthValue | read-write | Enable/disable this feature. |
| INT rcRadiusGlobalMaxNumberServer | 1.3.6.1.4.1.2272.1.29.1.2 | INTEGER | read-write | Maximum number of RADIUS servers. |
| INT rcRadiusGlobalAttributeValue | 1.3.6.1.4.1.2272.1.29.1.3 | INTEGER | read-write | Integer value for Access-Priority attribute. |
| I32 rcRadiusGlobalServerTableSize | 1.3.6.1.4.1.2272.1.29.1.4 | Integer32 | read-only | Used to indicate the number of entries in the rcRadiusServerTable. |
| T/F rcRadiusGlobalAcctEnable | 1.3.6.1.4.1.2272.1.29.1.5 | TruthValue | read-write | Enable/disable Radius Accounting feature. |
| INT rcRadiusGlobalAcctAttributeValue | 1.3.6.1.4.1.2272.1.29.1.6 | INTEGER | read-write | Integer value for User-Command attribute. |
| T/F rcRadiusGlobalAcctIncludeCli | 1.3.6.1.4.1.2272.1.29.1.7 | TruthValue | read-write | Include/Exclude cli-commands in radius acccounting updates. |
| T/F rcRadiusGlobalClearStat | 1.3.6.1.4.1.2272.1.29.1.8 | TruthValue | read-write | Clear Radius Statistic for all servers configured. |
| INT rcRadiusGlobalMcastAttributeValue | 1.3.6.1.4.1.2272.1.29.1.9 | INTEGER | read-write | Integer value for multicast address vendor specific attribute. |
| INT rcRadiusGlobalAuthInfoAttributeValue | 1.3.6.1.4.1.2272.1.29.1.10 | INTEGER | read-write | Integer value for Auth-Info vendor specific attribute. |
| INT rcRadiusGlobalCommandAccess | 1.3.6.1.4.1.2272.1.29.1.11 | INTEGER | read-write | Integer value for Command-Access attribute. |
| INT rcRadiusGlobalCliCommands | 1.3.6.1.4.1.2272.1.29.1.12 | INTEGER | read-write | Integer value for Cli-Command attribute. |
| INT rcRadiusGlobalIgapLogFSize | 1.3.6.1.4.1.2272.1.29.1.13 | INTEGER | read-write | Maximum size for the IGAP accounting time-out log file in KB. |
| T/F rcRadiusGlobalCliProfEnable | 1.3.6.1.4.1.2272.1.29.1.14 | TruthValue | read-write | Enable/disable Radius CLI Profiling. |
| C32 rcRadiusGlobalAuthInvalidServerAddress | 1.3.6.1.4.1.2272.1.29.1.15 | Counter32 | read-only | Number of Access Responses from unknown or invalid Radius servers. |
| T/F rcRadiusGlobalSourceIpFlag | 1.3.6.1.4.1.2272.1.29.1.16 | TruthValue | read-write | Flag to include configured IP address as source address in RADIUS packets. |
| INT rcRadiusGlobalCliCmdCount | 1.3.6.1.4.1.2272.1.29.1.18 | INTEGER | read-write | Integer value for Cli-Command-count. |
| rcRadiusServerTable | 1.3.6.1.4.1.2272.1.29.2 | not-accessible | The RADIUS table (0 to 10 entries). This table lists the information of the RADIUS server. | |
| rcRadiusServerEntry | 1.3.6.1.4.1.2272.1.29.2.1 | not-accessible | A RADIUS server table entry. | |
| INT rcRadiusServerPriority | 1.3.6.1.4.1.2272.1.29.2.1.1 | INTEGER | read-write | Server priority, used to control which server to choose first to send authentication. |
| IP rcRadiusServerAddress | 1.3.6.1.4.1.2272.1.29.2.1.2 | IpAddress | read-write | Server IP address of the RADIUS authentication server referred to in this table entry. |
| INT rcRadiusServerTimeOut | 1.3.6.1.4.1.2272.1.29.2.1.3 | INTEGER | read-write | The time interval in seconds before the client retransmit the packet. |
| T/F rcRadiusServerEnable | 1.3.6.1.4.1.2272.1.29.2.1.4 | TruthValue | read-write | Enable or disable this server. |
| INT rcRadiusServerMaxRetries | 1.3.6.1.4.1.2272.1.29.2.1.5 | INTEGER | read-write | Maximum number of retransmissions. |
| INT rcRadiusServerUdpPort | 1.3.6.1.4.1.2272.1.29.2.1.6 | INTEGER | read-write | The UDP port the client is using to send requests to this server. |
| STR rcRadiusServerSecretKey | 1.3.6.1.4.1.2272.1.29.2.1.7 | DisplayString | read-write | The identifier of the RADIUS authentication client. |
| C32 rcRadiusServerAccessRequests | 1.3.6.1.4.1.2272.1.29.2.1.8 | Counter32 | read-only | The number of RADIUS access-response packets sent to this server. This does not include retransmissions. |
| C32 rcRadiusServerAccessAccepts | 1.3.6.1.4.1.2272.1.29.2.1.9 | Counter32 | read-only | The number of RADIUS access-accept packets (valid or invalid) received from this server. |
| C32 rcRadiusServerAccessRejects | 1.3.6.1.4.1.2272.1.29.2.1.10 | Counter32 | read-only | The number of RADIUS access-reject packets (valid or invalid) received from this server. |
| C32 rcRadiusServerBadResponses | 1.3.6.1.4.1.2272.1.29.2.1.11 | Counter32 | read-only | The number of RADIUS invalid access-response packets received from this server. |
| C32 rcRadiusServerPendingRequests | 1.3.6.1.4.1.2272.1.29.2.1.12 | Counter32 | read-only | The number of RADIUS access-request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an access-request is sent and decremented due to receipt of an access-accept, access-reject, a timeout or retransmission. |
| C32 rcRadiusServerClientRetries | 1.3.6.1.4.1.2272.1.29.2.1.13 | Counter32 | read-only | The number of authentication retransmission to this server. |
| ROW rcRadiusServerRowStatus | 1.3.6.1.4.1.2272.1.29.2.1.14 | RowStatus | read-write | Used to create/delete entries. |
| T/F rcRadiusServerAcctEnable | 1.3.6.1.4.1.2272.1.29.2.1.15 | TruthValue | read-write | Enable or disable Radius Accounting on this server. |
| INT rcRadiusServerAcctUdpPort | 1.3.6.1.4.1.2272.1.29.2.1.16 | INTEGER | read-write | The UDP port the client used to send accounting requests to this server. |
| C32 rcRadiusServerAcctOnRequests | 1.3.6.1.4.1.2272.1.29.2.1.17 | Counter32 | read-only | The number of RADIUS accounting-on packets sent to this server. This does not include retransmissions. |
| C32 rcRadiusServerAcctOffRequests | 1.3.6.1.4.1.2272.1.29.2.1.18 | Counter32 | read-only | The number of RADIUS accounting-off packets sent to this server. This does not include retransmissions. |
| C32 rcRadiusServerAcctStartRequests | 1.3.6.1.4.1.2272.1.29.2.1.19 | Counter32 | read-only | The number of RADIUS accounting-start packets sent to this server. This does not include retransmissions. |
| C32 rcRadiusServerAcctStopRequests | 1.3.6.1.4.1.2272.1.29.2.1.20 | Counter32 | read-only | The number of RADIUS accounting-stop packets sent to this server. This does not include retransmissions. |
| C32 rcRadiusServerAcctInterimRequests | 1.3.6.1.4.1.2272.1.29.2.1.21 | Counter32 | read-only | The number of RADIUS accounting-interim packets sent to this server. This does not include retransmissions. |
| C32 rcRadiusServerAcctBadResponses | 1.3.6.1.4.1.2272.1.29.2.1.22 | Counter32 | read-only | The number of Invalid responses received from this server. |
| C32 rcRadiusServerAcctPendingRequests | 1.3.6.1.4.1.2272.1.29.2.1.23 | Counter32 | read-only | The number of RADIUS accounting packets that are waiting be sent to this server. This variable is incremented whenever any accounting-request is sent to this server and decremented when an acknowledgement is received or timeout occurs. |
| C32 rcRadiusServerAcctClientRetries | 1.3.6.1.4.1.2272.1.29.2.1.24 | Counter32 | read-only | The number of RADIUS accounting packets retransmitted to this server. |
| rcRadiusServTable | 1.3.6.1.4.1.2272.1.29.3 | not-accessible | The RADIUS table (0 to 10 entries). This table lists the information of the RADIUS server. | |
| rcRadiusServEntry | 1.3.6.1.4.1.2272.1.29.3.1 | not-accessible | A RADIUS server table entry. | |
| INT rcRadiusServPriority | 1.3.6.1.4.1.2272.1.29.3.1.1 | INTEGER | read-write | Server priority, used to control which server to choose first to send authentication. |
| IP rcRadiusServAddress | 1.3.6.1.4.1.2272.1.29.3.1.2 | IpAddress | read-write | Server IP address of the RADIUS authentication server referred to in this table entry. |
| INT rcRadiusServTimeOut | 1.3.6.1.4.1.2272.1.29.3.1.3 | INTEGER | read-write | The time interval in seconds before the client retransmit the packet. |
| T/F rcRadiusServEnable | 1.3.6.1.4.1.2272.1.29.3.1.4 | TruthValue | read-write | Enable or disable this server. |
| INT rcRadiusServMaxRetries | 1.3.6.1.4.1.2272.1.29.3.1.5 | INTEGER | read-write | Maximum number of retransmissions. |
| INT rcRadiusServUdpPort | 1.3.6.1.4.1.2272.1.29.3.1.6 | INTEGER | read-write | The UDP port the client is using to send requests to this server. |
| STR rcRadiusServSecretKey | 1.3.6.1.4.1.2272.1.29.3.1.7 | DisplayString | read-write | The identifier of the RADIUS authentication client. |
| C32 rcRadiusServAccessRequests | 1.3.6.1.4.1.2272.1.29.3.1.8 | Counter32 | read-only | The number of RADIUS access-response packets sent to this server. This does not include retransmissions. |
| C32 rcRadiusServAccessAccepts | 1.3.6.1.4.1.2272.1.29.3.1.9 | Counter32 | read-only | The number of RADIUS access-accept packets (valid or invalid) received from this server. |
| C32 rcRadiusServAccessRejects | 1.3.6.1.4.1.2272.1.29.3.1.10 | Counter32 | read-only | The number of RADIUS access-reject packets (valid or invalid) received from this server. |
| C32 rcRadiusServBadResponses | 1.3.6.1.4.1.2272.1.29.3.1.11 | Counter32 | read-only | The number of RADIUS invalid access-response packets received from this server. |
| C32 rcRadiusServPendingRequests | 1.3.6.1.4.1.2272.1.29.3.1.12 | Counter32 | read-only | The number of RADIUS access-request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an access-request is sent and decremented due to receipt of an access-accept, access-reject, a timeout or retransmission. |
| C32 rcRadiusServClientRetries | 1.3.6.1.4.1.2272.1.29.3.1.13 | Counter32 | read-only | The number of authentication retransmission to this server. |
| ROW rcRadiusServRowStatus | 1.3.6.1.4.1.2272.1.29.3.1.14 | RowStatus | read-write | Used to create/delete entries. |
| T/F rcRadiusServAcctEnable | 1.3.6.1.4.1.2272.1.29.3.1.15 | TruthValue | read-write | Enable or disable Radius Accounting on this server. |
| INT rcRadiusServAcctUdpPort | 1.3.6.1.4.1.2272.1.29.3.1.16 | INTEGER | read-write | The UDP port the client used to send accounting requests to this server. |
| C32 rcRadiusServAcctOnRequests | 1.3.6.1.4.1.2272.1.29.3.1.17 | Counter32 | read-only | The number of RADIUS accounting-on packets sent to this server. This does not include retransmissions. |
| C32 rcRadiusServAcctOffRequests | 1.3.6.1.4.1.2272.1.29.3.1.18 | Counter32 | read-only | The number of RADIUS accounting-off packets sent to this server. This does not include retransmissions. |
| C32 rcRadiusServAcctStartRequests | 1.3.6.1.4.1.2272.1.29.3.1.19 | Counter32 | read-only | The number of RADIUS accounting-start packets sent to this server. This does not include retransmissions. |
| C32 rcRadiusServAcctStopRequests | 1.3.6.1.4.1.2272.1.29.3.1.20 | Counter32 | read-only | The number of RADIUS accounting-stop packets sent to this server. This does not include retransmissions. |
| C32 rcRadiusServAcctInterimRequests | 1.3.6.1.4.1.2272.1.29.3.1.21 | Counter32 | read-only | The number of RADIUS accounting-interim packets sent to this server. This does not include retransmissions. |
| C32 rcRadiusServAcctBadResponses | 1.3.6.1.4.1.2272.1.29.3.1.22 | Counter32 | read-only | The number of Invalid responses received from this server. |
| C32 rcRadiusServAcctPendingRequests | 1.3.6.1.4.1.2272.1.29.3.1.23 | Counter32 | read-only | The number of RADIUS accounting packets that are waiting be sent to this server. This variable is incremented whenever any accounting-request is sent to this server and decremented when an acknowledgement is received or timeout occurs. |
| C32 rcRadiusServAcctClientRetries | 1.3.6.1.4.1.2272.1.29.3.1.24 | Counter32 | read-only | The number of RADIUS accounting packets retransmitted to this server. |
| INT rcRadiusServUsedBy | 1.3.6.1.4.1.2272.1.29.3.1.25 | INTEGER | read-only | cli(1): for cli login, igap(2): for igap,snmp(3): for snmp login, eap(4) for EAP PAE Authenticator, web(5) for EDM login. |
| IP rcRadiusServNasIpAddress | 1.3.6.1.4.1.2272.1.29.3.1.26 | IpAddress | read-only | RADIUS Client NAS Identifier for this server. |
| STR rcRadiusServRoundTripTime | 1.3.6.1.4.1.2272.1.29.3.1.27 | DisplayString | read-only | Time different between the instance when a RADIUS request is sent and the corresponding response is received. |
| C32 rcRadiusServAccessChallanges | 1.3.6.1.4.1.2272.1.29.3.1.28 | Counter32 | read-only | The number of RADIUS access-challanges packets sent to this server. This does not include retransmission. |
| IP rcRadiusServSourceIpAddr | 1.3.6.1.4.1.2272.1.29.3.1.29 | IpAddress | read-write | source IP address RADIUS packets. |
| rcRadiusGlobalSnmp | 1.3.6.1.4.1.2272.1.29.4 | |||
| T/F rcRadiusGlobalSnmpEnable | 1.3.6.1.4.1.2272.1.29.4.1 | TruthValue | read-write | Enable/disable snmp radius authentication. |
| T/F rcRadiusGlobalSnmpAcctEnable | 1.3.6.1.4.1.2272.1.29.4.2 | TruthValue | read-write | Enable/disable Radius Accounting for SNMP. |
| INT rcRadiusGlobalSnmpReAuthenticateTimer | 1.3.6.1.4.1.2272.1.29.4.3 | INTEGER | read-write | Integer value representing Re-Authenticate Timer in seconds. Timer to be used to Re- Authenticate a SNMP Session. |
| INT rcRadiusGlobalSnmpAbortSessionTimer | 1.3.6.1.4.1.2272.1.29.4.4 | INTEGER | read-write | Integer value representing the time in seconds after which the snmp session is considered expired and Radius Accounting Stop message is sent. |
| STR rcRadiusGlobalSnmpUserName | 1.3.6.1.4.1.2272.1.29.4.5 | DisplayString | read-write | User name for Radius SNMP Accounting. |
| MAC rcRadiusEapLastRejMac | 1.3.6.1.4.1.2272.1.29.4.6 | MacAddress | read-only | Used to store the Last Rejected MAC address on an EAP enabled port. |
| NUM rcRadiusPaePortNumber | 1.3.6.1.4.1.2272.1.29.4.7 | InterfaceIndex | read-only | Used to store the Port Number on which the Mac Intrusion happened. |
| MAC rcRadiusEapLastAuthMac | 1.3.6.1.4.1.2272.1.29.4.8 | MacAddress | read-only | Used to store the Last Authenticated MAC address on an EAP enabled port. |
| rcIgmp | 1.3.6.1.4.1.2272.1.30 | |||
| rcIgmpInterfaceExtnTable | 1.3.6.1.4.1.2272.1.30.1 | not-accessible | ||
| rcIgmpInterfaceExtnEntry | 1.3.6.1.4.1.2272.1.30.1.1 | not-accessible | ||
| NUM rcIgmpInterfaceExtnIfIndex | 1.3.6.1.4.1.2272.1.30.1.1.1 | InterfaceIndex | read-only | ifindex. |
| T/F rcIgmpInterfaceExtnSnoopEnable | 1.3.6.1.4.1.2272.1.30.1.1.2 | TruthValue | read-write | enable snoop. |
| T/F rcIgmpInterfaceExtnProxySnoopEnable | 1.3.6.1.4.1.2272.1.30.1.1.3 | TruthValue | read-write | enable proxy snoop. |
| INT rcIgmpInterfaceExtnMaxAdvertiseInterval | 1.3.6.1.4.1.2272.1.30.1.1.4 | INTEGER | read-write | |
| INT rcIgmpInterfaceExtnMinAdvertiseInterval | 1.3.6.1.4.1.2272.1.30.1.1.5 | INTEGER | read-write | |
| I32 rcIgmpInterfaceExtnMaxInitialAdvertiseInterval | 1.3.6.1.4.1.2272.1.30.1.1.6 | Integer32 | read-write | |
| I32 rcIgmpInterfaceExtnMaxInitialAdvertments | 1.3.6.1.4.1.2272.1.30.1.1.7 | Integer32 | read-write | |
| I32 rcIgmpInterfaceExtnNeighborDeadInterval | 1.3.6.1.4.1.2272.1.30.1.1.8 | Integer32 | read-write | |
| T/F rcIgmpInterfaceExtnFastLeaveEnable | 1.3.6.1.4.1.2272.1.30.1.1.9 | TruthValue | read-write | Enable fast leave on this interface. |
| POR rcIgmpInterfaceExtnFastLeavePortMembers | 1.3.6.1.4.1.2272.1.30.1.1.10 | PortSet | read-write | The set of ports that are enabled for fast leave. |
| T/F rcIgmpInterfaceExtnMrdiscEnable | 1.3.6.1.4.1.2272.1.30.1.1.11 | TruthValue | read-write | Enable/disable multicast router discovery. |
| POR rcIgmpInterfaceExtnDiscoveredRouterPorts | 1.3.6.1.4.1.2272.1.30.1.1.12 | PortSet | read-only | list of ports that discovered by IGMP Multicast router discovery (MRDISC) protocol. |
| POR rcIgmpInterfaceExtnSnoopMRouterPorts | 1.3.6.1.4.1.2272.1.30.1.1.13 | PortSet | read-write | The set of ports in this interface that provide connectivity to an IP Multicast router. |
| POR rcIgmpInterfaceExtnSnoopActiveMRouterPorts | 1.3.6.1.4.1.2272.1.30.1.1.14 | PortSet | read-only | Active ports. |
| I32 rcIgmpInterfaceExtnSnoopMRouterExpiration | 1.3.6.1.4.1.2272.1.30.1.1.15 | Integer32 | read-only | Multicast querier router aging time out. |
| INT rcIgmpInterfaceExtnFlushAction | 1.3.6.1.4.1.2272.1.30.1.1.16 | INTEGER | read-write | IGMP flush action. |
| ENA rcIgmpInterfaceExtnRouterAlertEnable | 1.3.6.1.4.1.2272.1.30.1.1.17 | EnableValue | read-write | Enable Router Alert Check. |
| T/F rcIgmpInterfaceExtnSsmEnable | 1.3.6.1.4.1.2272.1.30.1.1.18 | TruthValue | read-write | enable SSM. |
| ENA rcIgmpInterfaceExtnIgapEnable | 1.3.6.1.4.1.2272.1.30.1.1.19 | EnableValue | read-write | enable/disable IGAP. |
| ENA rcIgmpInterfaceExtnAccntEnable | 1.3.6.1.4.1.2272.1.30.1.1.20 | EnableValue | read-write | enable/disable accounting. |
| ENA rcIgmpInterfaceExtnAuthEnable | 1.3.6.1.4.1.2272.1.30.1.1.21 | EnableValue | read-write | enable/disable authentication. |
| ENA rcIgmpInterfaceExtnStreamLimitEnable | 1.3.6.1.4.1.2272.1.30.1.1.22 | EnableValue | read-write | Stream Limitation enable/disable. |
| I32 rcIgmpInterfaceExtnMaxStreams | 1.3.6.1.4.1.2272.1.30.1.1.23 | Integer32 | read-write | Maximum number of stream. |
| I32 rcIgmpInterfaceExtnNumStreams | 1.3.6.1.4.1.2272.1.30.1.1.24 | Integer32 | read-only | Current number of streams. |
| IP rcIgmpInterfaceExtnNewQuerier | 1.3.6.1.4.1.2272.1.30.1.1.25 | IpAddress | read-only | The address of the New IGMP Querier on the IP subnet to which this interface is attached. |
| T/F rcIgmpInterfaceExtnSnoopQuerierEnable | 1.3.6.1.4.1.2272.1.30.1.1.26 | TruthValue | read-write | enable snoop querier. |
| IP rcIgmpInterfaceExtnSnoopQuerierAddr | 1.3.6.1.4.1.2272.1.30.1.1.27 | IpAddress | read-write | The pseudo address of the IGMP Snoop Querier. |
| T/F rcIgmpInterfaceExtnMvrEnable | 1.3.6.1.4.1.2272.1.30.1.1.28 | TruthValue | read-write | Enable or disable mcast-vlan-registration on a vlan, it is used to specified a vlan works as a mcast-vlan, maximum 16 mcast-vlan is supported. |
| T/F rcIgmpInterfaceExtnMvrProxyEnable | 1.3.6.1.4.1.2272.1.30.1.1.29 | TruthValue | read-write | enable or disable mcast-vlan-registration proxy on a vlan, you must enable mcast-vlan-registration at first. |
| T/F rcIgmpInterfaceExtnDynamicDowngradeEnable | 1.3.6.1.4.1.2272.1.30.1.1.30 | TruthValue | read-write | enable dynamic downgrade the IGMP version when older version query message was received. |
| T/F rcIgmpInterfaceExtnCompatibilityModeEnable | 1.3.6.1.4.1.2272.1.30.1.1.31 | TruthValue | read-write | enable v2 v3 compatible mode, which will handle the IGMP v2 message in v3 interface. |
| INT rcIgmpInterfaceExtnOperVersion | 1.3.6.1.4.1.2272.1.30.1.1.32 | INTEGER | read-only | The operational version of IGMP which is running on this interface. |
| rcIgmpStaticTable | 1.3.6.1.4.1.2272.1.30.2 | not-accessible | ||
| rcIgmpStaticEntry | 1.3.6.1.4.1.2272.1.30.2.1 | not-accessible | ||
| NUM rcIgmpStaticIfIndex | 1.3.6.1.4.1.2272.1.30.2.1.1 | InterfaceIndex | read-only | ifindex |
| IP rcIgmpStaticGrpAddr | 1.3.6.1.4.1.2272.1.30.2.1.2 | IpAddress | read-only | Ip multicast address. The GrpAddress holds the starting range for the address range. If the ToGrpAddress is not entered, the it is as good as entering a single address. |
| POR rcIgmpStaticMemberPorts | 1.3.6.1.4.1.2272.1.30.2.1.3 | PortSet | read-write | egressing ports. |
| POR rcIgmpStaticNotAllowedToJoin | 1.3.6.1.4.1.2272.1.30.2.1.4 | PortSet | read-write | not allowed to join. |
| ROW rcIgmpStaticRowStatus | 1.3.6.1.4.1.2272.1.30.2.1.5 | RowStatus | read-write | Used to create/delete entries in the rcIgmpStaticEntry. |
| IP rcIgmpStaticToGrpAddr | 1.3.6.1.4.1.2272.1.30.2.1.6 | IpAddress | read-write | To hold the range for the GrpAddress. |
| rcIgmpAccessTable | 1.3.6.1.4.1.2272.1.30.3 | not-accessible | ||
| rcIgmpAccessEntry | 1.3.6.1.4.1.2272.1.30.3.1 | not-accessible | ||
| NUM rcIgmpAccessIfIndex | 1.3.6.1.4.1.2272.1.30.3.1.1 | InterfaceIndex | read-only | ifindex |
| IP rcIgmpAccessGrpAddr | 1.3.6.1.4.1.2272.1.30.3.1.2 | IpAddress | read-only | ip multicast addr. |
| IP rcIgmpAccessHostAddr | 1.3.6.1.4.1.2272.1.30.3.1.3 | IpAddress | read-only | host addr. |
| INT rcIgmpAccessMode | 1.3.6.1.4.1.2272.1.30.3.1.4 | INTEGER | read-write | denyTX(1), denyRX(2), denyBOTH(3). |
| ROW rcIgmpAccessRowStatus | 1.3.6.1.4.1.2272.1.30.3.1.5 | RowStatus | read-write | Used to create/delete entries in the rcIgmpAccessEntry. |
| IP rcIgmpAccessHostMask | 1.3.6.1.4.1.2272.1.30.3.1.6 | IpAddress | read-only | host mask. |
| rcIgmpSenderTable | 1.3.6.1.4.1.2272.1.30.4 | not-accessible | ||
| rcIgmpSenderEntry | 1.3.6.1.4.1.2272.1.30.4.1 | not-accessible | ||
| IP rcIgmpSenderGrpAddr | 1.3.6.1.4.1.2272.1.30.4.1.1 | IpAddress | read-only | ip multicast addr. |
| NUM rcIgmpSenderIfIndex | 1.3.6.1.4.1.2272.1.30.4.1.2 | InterfaceIndex | read-only | ifindex |
| IP rcIgmpSenderMemberAddr | 1.3.6.1.4.1.2272.1.30.4.1.3 | IpAddress | read-only | host addr. |
| INT rcIgmpSenderAction | 1.3.6.1.4.1.2272.1.30.4.1.4 | INTEGER | read-write | none(0), flushEntry(1), flushGrp(2). |
| I32 rcIgmpSenderTPort | 1.3.6.1.4.1.2272.1.30.4.1.5 | Integer32 | read-only | Igmp Sender Tport. |
| INT rcIgmpSenderState | 1.3.6.1.4.1.2272.1.30.4.1.6 | INTEGER | read-only | Indicates if a sender exists because of an IGMP access filter or not. |
| rcIgmpSsmGlobal | 1.3.6.1.4.1.2272.1.30.5 | |||
| T/F rcIgmpSsmGlobalDynamicLearning | 1.3.6.1.4.1.2272.1.30.5.1 | TruthValue | read-write | Enable/disable dynamic learning or source/group pair from IGMPv3 report. |
| INT rcIgmpSsmGlobalAdminAction | 1.3.6.1.4.1.2272.1.30.5.2 | INTEGER | read-write | Set the admin status of all the Ssm entries to enable/disable at once. |
| IP rcIgmpSsmGlobalRangeGroup | 1.3.6.1.4.1.2272.1.30.5.3 | IpAddress | read-write | If multicast group address & RangeMask == RangeGroup, then RangeGroup is in Ssm Range. Else it is not in the range. |
| IP rcIgmpSsmGlobalRangeMask | 1.3.6.1.4.1.2272.1.30.5.4 | IpAddress | read-write | Used with RangeGroup. |
| rcIgmpSsmTable | 1.3.6.1.4.1.2272.1.30.6 | not-accessible | ||
| rcIgmpSsmEntry | 1.3.6.1.4.1.2272.1.30.6.1 | not-accessible | ||
| IP rcIgmpSsmIpMulticastGrp | 1.3.6.1.4.1.2272.1.30.6.1.1 | IpAddress | read-only | This is the IP multicast group address that has default range of 232/8. This parameter should be configured by the user. |
| IP rcIgmpSsmIpSource | 1.3.6.1.4.1.2272.1.30.6.1.2 | IpAddress | read-write | This is the Source's IP address that will be sending traffic to the group source. This parameter should be configured by the user. |
| INT rcIgmpSsmLearningMode | 1.3.6.1.4.1.2272.1.30.6.1.3 | INTEGER | read-only | This is a read only field that provides information if the entry is statically configured entry (Static) or a dynamically learned entry from IGMPv3 (Dynamic). Note that Dynamic may not be used in the first step of the implementation. |
| T/F rcIgmpSsmActivity | 1.3.6.1.4.1.2272.1.30.6.1.4 | TruthValue | read-only | This is a read only field. It provides the activity on the corresponding (S,G). If the source is active and traffic is flowing to the switch, this field value should be Active, otherwise it should say non-active. This information is useful in knowing if the group has an active source or not when the group is joined by a member on the switch. |
| ENA rcIgmpSsmAdminState | 1.3.6.1.4.1.2272.1.30.6.1.5 | EnableValue | read-write | The admin state provides information on whether the entry is to be used or not. If the value of this field is Enabled (default), then the entry can be used. If the state is Disabled, then the entry will not be used, but will be saved for future use. |
| ROW rcIgmpSsmRowStatus | 1.3.6.1.4.1.2272.1.30.6.1.6 | RowStatus | read-write | Used to create/delete entries. |
| rcIgmpNewAccessTable | 1.3.6.1.4.1.2272.1.30.7 | not-accessible | ||
| rcIgmpNewAccessEntry | 1.3.6.1.4.1.2272.1.30.7.1 | not-accessible | ||
| NUM rcIgmpNewAccessIfIndex | 1.3.6.1.4.1.2272.1.30.7.1.1 | InterfaceIndex | read-only | ifindex |
| I32 rcIgmpNewAccessPrefixListId | 1.3.6.1.4.1.2272.1.30.7.1.2 | Integer32 | read-only | Prefix List ID. |
| STR rcIgmpNewAccessPrefixListName | 1.3.6.1.4.1.2272.1.30.7.1.3 | DisplayString | read-write | Prefix List name. |
| IP rcIgmpNewAccessHostAddr | 1.3.6.1.4.1.2272.1.30.7.1.4 | IpAddress | read-only | host addr. |
| IP rcIgmpNewAccessHostMask | 1.3.6.1.4.1.2272.1.30.7.1.5 | IpAddress | read-only | host mask. |
| INT rcIgmpNewAccessActionMode | 1.3.6.1.4.1.2272.1.30.7.1.6 | INTEGER | read-write | action mode. |
| ROW rcIgmpNewAccessRowStatus | 1.3.6.1.4.1.2272.1.30.7.1.7 | RowStatus | read-write | Used to create/delete entries in the rcIgmpNewAccessEntry. |
| rcIgmpChannelLimitTable | 1.3.6.1.4.1.2272.1.30.8 | not-accessible | ||
| rcIgmpChannelLimitEntry | 1.3.6.1.4.1.2272.1.30.8.1 | not-accessible | ||
| NUM rcIgmpChannelLimitIfIndex | 1.3.6.1.4.1.2272.1.30.8.1.1 | InterfaceIndex | read-only | ifindex |
| I32 rcIgmpChannelLimitPort | 1.3.6.1.4.1.2272.1.30.8.1.2 | Integer32 | read-only | The port belong to this vlan. |
| I32 rcIgmpChannelLimitMaxStreams | 1.3.6.1.4.1.2272.1.30.8.1.3 | Integer32 | read-write | Maximum number of stream. |
| I32 rcIgmpChannelLimitNumStreams | 1.3.6.1.4.1.2272.1.30.8.1.4 | Integer32 | read-only | Current number of streams. |
| ROW rcIgmpChannelLimitRowStatus | 1.3.6.1.4.1.2272.1.30.8.1.5 | RowStatus | read-write | Row Status. |
| rcIgmpIgapServiceAbilityTable | 1.3.6.1.4.1.2272.1.30.9 | not-accessible | ||
| rcIgmpIgapServiceAbilityEntry | 1.3.6.1.4.1.2272.1.30.9.1 | not-accessible | ||
| NUM rcIgmpIgapServiceAbilityIfIndex | 1.3.6.1.4.1.2272.1.30.9.1.1 | InterfaceIndex | read-only | ifindex |
| C64 rcIgmpIgapServiceAbilityAuthSuccess | 1.3.6.1.4.1.2272.1.30.9.1.2 | Counter64 | read-only | The port belong to this vlan. |
| C64 rcIgmpIgapServiceAbilityAuthReject | 1.3.6.1.4.1.2272.1.30.9.1.3 | Counter64 | read-only | Maximum number of stream. |
| C64 rcIgmpIgapServiceAbilityRespTimeout | 1.3.6.1.4.1.2272.1.30.9.1.4 | Counter64 | read-only | Current number of streams. |
| C64 rcIgmpIgapServiceAbilityPapJoinReq | 1.3.6.1.4.1.2272.1.30.9.1.5 | Counter64 | read-only | Row Status. |
| C64 rcIgmpIgapServiceAbilityBasicQuery | 1.3.6.1.4.1.2272.1.30.9.1.6 | Counter64 | read-only | Current number of streams. |
| C64 rcIgmpIgapServiceAbilityBasicLeave | 1.3.6.1.4.1.2272.1.30.9.1.7 | Counter64 | read-only | Row Status. |
| T/F rcIgmpIgapServiceAbilityClearStat | 1.3.6.1.4.1.2272.1.30.9.1.8 | TruthValue | read-write | Clear Counter. |
| rcIgmpIgapGlobal | 1.3.6.1.4.1.2272.1.30.10 | |||
| T/F rcIgmpIgapGlobalClearAllStat | 1.3.6.1.4.1.2272.1.30.10.1 | TruthValue | read-write | Clear All IGAP Counters. |
| rcIgmpGlobalParams | 1.3.6.1.4.1.2272.1.30.11 | |||
| INT rcIgmpFastLeaveMode | 1.3.6.1.4.1.2272.1.30.11.1 | INTEGER | read-write | Set the fast-leave mode to be used by for all fast-leave enabled IGMP interfaces. |
| ENA rcIgmpGenerateTrap | 1.3.6.1.4.1.2272.1.30.11.2 | EnableValue | read-write | Enabling the IGMP to generate trap. |
| ENA rcIgmpGenerateLog | 1.3.6.1.4.1.2272.1.30.11.3 | EnableValue | read-write | Enabling the IGMP to generate log. |
| ENA rcIgmpMvr | 1.3.6.1.4.1.2272.1.30.11.4 | EnableValue | read-write | Enabling mcast-vlan-registration globally. |
| rcIgmpCacheExtnTable | 1.3.6.1.4.1.2272.1.30.12 | not-accessible | ||
| rcIgmpCacheExtnEntry | 1.3.6.1.4.1.2272.1.30.12.1 | not-accessible | ||
| INT rcIgmpCacheExtnType | 1.3.6.1.4.1.2272.1.30.12.1.1 | INTEGER | read-only | It takes up either of the two values, dynamic or static depending upon whether the entry is learnt Dynamic or is added statically. |
| POR rcIgmpCacheExtnStaticPorts | 1.3.6.1.4.1.2272.1.30.12.1.2 | PortSet | read-only | It displays the static ports for the static joins, this would be null for the dynamic entry. |
| rcIgmpSnoopTraceTable | 1.3.6.1.4.1.2272.1.30.13 | not-accessible | The table listing the multicast groups traversing the snoop enabled router | |
| rcIgmpSnoopTraceEntry | 1.3.6.1.4.1.2272.1.30.13.1 | not-accessible | The entry listing the multicast groups traversing the snoop enabled router | |
| IP rcIgmpSnoopGrpAddr | 1.3.6.1.4.1.2272.1.30.13.1.1 | IpAddress | not-accessible | ip mcast addr of grp traversing the router |
| IP rcIgmpSnoopSrcAddr | 1.3.6.1.4.1.2272.1.30.13.1.2 | IpAddress | not-accessible | Ip src addr of the mcast grp address |
| NUM rcIgmpSnoopOutVlan | 1.3.6.1.4.1.2272.1.30.13.1.3 | InterfaceIndex | not-accessible | Egress vlan id for the mcast group |
| NUM rcIgmpSnoopInPort | 1.3.6.1.4.1.2272.1.30.13.1.4 | InterfaceIndex | read-only | Ingress port for the mcast grp |
| NUM rcIgmpSnoopInVlan | 1.3.6.1.4.1.2272.1.30.13.1.5 | InterfaceIndex | read-only | Ingress vlan id for the mcast source |
| POR rcIgmpSnoopOutPort | 1.3.6.1.4.1.2272.1.30.13.1.6 | PortSet | read-only | Egress port of the mcast grp |
| rcIgmpNewGroupTable | 1.3.6.1.4.1.2272.1.30.14 | not-accessible | The (conceptual) table listing the multicast groups configured in the device. | |
| rcIgmpNewGroupEntry | 1.3.6.1.4.1.2272.1.30.14.1 | not-accessible | An entry (conceptual row) representing an Igmp group. | |
| IP rcIgmpNewGroupIpAddress | 1.3.6.1.4.1.2272.1.30.14.1.1 | IpAddress | not-accessible | Multicast group Address (Class D) that others want to join. A group address can be the same for many incoming ports. |
| IP rcIgmpNewGroupMembers | 1.3.6.1.4.1.2272.1.30.14.1.2 | IpAddress | not-accessible | IP Address of a source that has sent group report wishing to join this group. |
| INT rcIgmpNewGroupInPort | 1.3.6.1.4.1.2272.1.30.14.1.3 | INTEGER | not-accessible | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| I32 rcIgmpNewGroupExpiration | 1.3.6.1.4.1.2272.1.30.14.1.4 | Integer32 | read-only | Time left before the group report expired on this port. Only one of this variable port. This variable is updated upon receiving a group report. |
| NUM rcIgmpNewGroupIfIndex | 1.3.6.1.4.1.2272.1.30.14.1.5 | InterfaceIndex | read-only | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| STR rcIgmpNewGroupUserId | 1.3.6.1.4.1.2272.1.30.14.1.6 | DisplayString | read-only | User-id sending this group |
| INT rcIgmpNewGroupMemberState | 1.3.6.1.4.1.2272.1.30.14.1.7 | INTEGER | read-only | Used for IGAP, to indicated member state. |
| I32 rcIgmpNewGroupSessionTime | 1.3.6.1.4.1.2272.1.30.14.1.8 | Integer32 | read-only | Used for IGAP, to indicated the session time in seconds for the member. Session time is started after traffic is available to member. It can be also called AccountingTime since its values correspondes to the accounting duration of IGAP user session. |
| rcIgmpMvrGroupTable | 1.3.6.1.4.1.2272.1.30.17 | not-accessible | The (conceptual) table listing the mcast-vlan-registration groups. | |
| rcIgmpMvrGroupEntry | 1.3.6.1.4.1.2272.1.30.17.1 | not-accessible | An entry (conceptual row) in the rcIgmpMvrGroupTable. | |
| IP rcIgmpMvrGroupGroupAddress | 1.3.6.1.4.1.2272.1.30.17.1.1 | IpAddress | not-accessible | The group's multicast ip address. |
| I32 rcIgmpMvrGroupVlanId | 1.3.6.1.4.1.2272.1.30.17.1.2 | Integer32 | not-accessible | The igmp snoop enabled vlan this group belongs to. |
| I32 rcIgmpMvrGroupIgmpVersion | 1.3.6.1.4.1.2272.1.30.17.1.3 | Integer32 | read-only | Version of this group. |
| I32 rcIgmpMvrGroupLivingTime | 1.3.6.1.4.1.2272.1.30.17.1.4 | Integer32 | read-only | Living time of this group. |
| rcIgmpMvrVlanTable | 1.3.6.1.4.1.2272.1.30.18 | not-accessible | The (conceptual) table listing the mcast vlans in mcast-vlan-registration. | |
| rcIgmpMvrVlanEntry | 1.3.6.1.4.1.2272.1.30.18.1 | not-accessible | An entry (conceptual row) in the rcIgmpMvrVlanTable. | |
| I32 rcIgmpMvrVlanMvrVlanId | 1.3.6.1.4.1.2272.1.30.18.1.1 | Integer32 | not-accessible | The id of mcast-vlan. |
| T/F rcIgmpMvrVlanMvrVlanProxy | 1.3.6.1.4.1.2272.1.30.18.1.2 | TruthValue | read-only | working mode of this mcast-vlan, proxy or not. |
| I32 rcIgmpMvrVlanSourcePort | 1.3.6.1.4.1.2272.1.30.18.1.3 | Integer32 | read-only | source port for this mcast-vlan. |
| IP rcIgmpMvrVlanSourceAddress | 1.3.6.1.4.1.2272.1.30.18.1.4 | IpAddress | read-only | querier address for the source in this mcast-vlan. |
| rcIgmpMvrReceiverTable | 1.3.6.1.4.1.2272.1.30.19 | not-accessible | The (conceptual) table listing the mcast vlans and receiver vlans in mcast-vlan-registration. | |
| rcIgmpMvrReceiverEntry | 1.3.6.1.4.1.2272.1.30.19.1 | not-accessible | An entry (conceptual row) in the rcIgmpMvrGroupTable. | |
| I32 rcIgmpMvrReceiverVlanId | 1.3.6.1.4.1.2272.1.30.19.1.1 | Integer32 | not-accessible | The id of receiver vlan that bound to mcast-vlan. |
| ROW rcIgmpMvrReceiverRowStatus | 1.3.6.1.4.1.2272.1.30.19.1.2 | RowStatus | read-create | Used to create/delete entries. |
| rcUserSetTime | 1.3.6.1.4.1.2272.1.31 | |||
| INT rcUserSetTimeYear | 1.3.6.1.4.1.2272.1.31.1 | INTEGER | read-write | Year of the time. |
| INT rcUserSetTimeMonth | 1.3.6.1.4.1.2272.1.31.2 | INTEGER | read-write | Month of the time. |
| INT rcUserSetTimeDate | 1.3.6.1.4.1.2272.1.31.3 | INTEGER | read-write | Date of the time. |
| INT rcUserSetTimeHour | 1.3.6.1.4.1.2272.1.31.4 | INTEGER | read-write | Hour of the time. |
| INT rcUserSetTimeMinute | 1.3.6.1.4.1.2272.1.31.5 | INTEGER | read-write | Minute of the time. |
| INT rcUserSetTimeSecond | 1.3.6.1.4.1.2272.1.31.6 | INTEGER | read-write | Second of the time. |
| rcL2Redundancy | 1.3.6.1.4.1.2272.1.32 | |||
| INT rcL2RedundancyHaCpuState | 1.3.6.1.4.1.2272.1.32.1 | INTEGER | read-only | Indicate the Ha-CPU state. initialization - indicate the CPU is in this state. oneWayActive - Modules that need to be synchronized have registered with the framework (either locally or a message was received from remote CPU (1). twoWayActive - Modules that need to be synchronized have registered with the framework (either locally or a message was received from remote CPU (2). synchronized - Table based synchroniztion was completed on the current CPU (3). remoteIncompatible - CPUs framework version is incompatible with the remote CPU (4). error - If an invalid event is generated in a given state the CPU enters Error state (5). disabled - High Availability is not enabled (6). peerNotConnected - no peer connection is established (7). peerConnected - peer connection is established (8). lostPeerConnection - lost connection to peer/Standby CPU (9). notSynchronized - Table Sync is not complete (10). |
| INT rcL2RedundancyHaEvent | 1.3.6.1.4.1.2272.1.32.2 | INTEGER | read-only | Indicate the Ha event status. restart (0) - Causes the state machine to restart systemRegistrationDone (1)- Causes the CPU to transfer to One Way or Two Way Active state. Locally or message received from remote CPU. tableSynchronizationDone (2) - Causes the CPU to transfer to Synchronized state. versionIncompatible (3) - Causes the CPU to go to Remote Incompatible state noEvent (4) - Means no event has occured uptill now. |
| ENA rcL2RedundancyEnable | 1.3.6.1.4.1.2272.1.32.3 | EnableValue | read-write | Indicate the feature enable/disable. |
| INT rcL2RedundancyStandbyCpu | 1.3.6.1.4.1.2272.1.32.4 | INTEGER | read-only | Indicate if the L2 Redundancy is enabled on the standby CPU. |
| rcNtp | 1.3.6.1.4.1.2272.1.33 | |||
| rcNtpGlobal | 1.3.6.1.4.1.2272.1.33.1 | |||
| T/F rcNtpGlobalEnable | 1.3.6.1.4.1.2272.1.33.1.1 | TruthValue | read-write | Enable/disable NTP feature |
| INT rcNtpGlobalInterval | 1.3.6.1.4.1.2272.1.33.1.2 | INTEGER | read-write | Time interval between successive NTP updates in minutes. |
| rcNtpServerTable | 1.3.6.1.4.1.2272.1.33.2 | not-accessible | The NTP server table. This table lists the information of a NTP server | |
| rcNtpServerEntry | 1.3.6.1.4.1.2272.1.33.2.1 | not-accessible | A NTP server table entry. | |
| IP rcNtpServerAddress | 1.3.6.1.4.1.2272.1.33.2.1.1 | IpAddress | read-only | Server IP address of NTP time source referred to in this table entry. |
| T/F rcNtpServerEnable | 1.3.6.1.4.1.2272.1.33.2.1.2 | TruthValue | read-write | Enable or disable this server for participation in time update. |
| T/F rcNtpServerAuthentication | 1.3.6.1.4.1.2272.1.33.2.1.3 | TruthValue | read-write | Enable or disable the MD5 Authentication on this serve. |
| INT rcNtpServerKeyId | 1.3.6.1.4.1.2272.1.33.2.1.4 | INTEGER | read-write | Public Key used to generate MD5 digest for this server. |
| C32 rcNtpServerAccessAttempts | 1.3.6.1.4.1.2272.1.33.2.1.5 | Counter32 | read-only | The number of NTP requests sent to this server |
| C32 rcNtpServerAccessSuccess | 1.3.6.1.4.1.2272.1.33.2.1.6 | Counter32 | read-only | The number of times this server was selected to update the time |
| C32 rcNtpServerAccessFailure | 1.3.6.1.4.1.2272.1.33.2.1.7 | Counter32 | read-only | The number of times this server was rejected from updating the time |
| ROW rcNtpServerRowStatus | 1.3.6.1.4.1.2272.1.33.2.1.8 | RowStatus | read-write | Used to create/delete entries. |
| STR rcNtpServerStratum | 1.3.6.1.4.1.2272.1.33.2.1.9 | DisplayString | read-only | Stratum of this server |
| STR rcNtpServerVersion | 1.3.6.1.4.1.2272.1.33.2.1.10 | DisplayString | read-only | NTP version of this server |
| STR rcNtpServerRootDelay | 1.3.6.1.4.1.2272.1.33.2.1.11 | DisplayString | read-only | Root Delay of this server |
| STR rcNtpServerPrecision | 1.3.6.1.4.1.2272.1.33.2.1.12 | DisplayString | read-only | NTP precision of this server in seconds |
| STR rcNtpServerReachable | 1.3.6.1.4.1.2272.1.33.2.1.13 | DisplayString | read-only | NTP Reachability of this server |
| STR rcNtpServerSynchronized | 1.3.6.1.4.1.2272.1.33.2.1.14 | DisplayString | read-only | Status of synchronization with this server |
| rcNtpKeyTable | 1.3.6.1.4.1.2272.1.33.3 | not-accessible | The NTP key table. This table lists the private key of the public key Id | |
| rcNtpKeyEntry | 1.3.6.1.4.1.2272.1.33.3.1 | not-accessible | A NTP key table entry. | |
| INT rcNtpKeyId | 1.3.6.1.4.1.2272.1.33.3.1.1 | INTEGER | read-only | Public Key used to generate MD5 digest |
| STR rcNtpKeySecret | 1.3.6.1.4.1.2272.1.33.3.1.2 | DisplayString | read-write | Private Key used to generate MD5 Digest |
| ROW rcNtpKeyRowStatus | 1.3.6.1.4.1.2272.1.33.3.1.3 | RowStatus | read-write | Used to create/delete entries. |
| rcSsh | 1.3.6.1.4.1.2272.1.34 | |||
| rcSshGlobal | 1.3.6.1.4.1.2272.1.34.1 | |||
| INT rcSshGlobalVersion | 1.3.6.1.4.1.2272.1.34.1.1 | INTEGER | read-write | SSH version |
| I32 rcSshGlobalPort | 1.3.6.1.4.1.2272.1.34.1.2 | Integer32 | read-write | SSH connection port. |
| INT rcSshGlobalMaxSession | 1.3.6.1.4.1.2272.1.34.1.3 | INTEGER | read-write | Number of session allowed. |
| INT rcSshGlobalTimeout | 1.3.6.1.4.1.2272.1.34.1.4 | INTEGER | read-write | SSH connection timeout in seconds. |
| INT rcSshGlobalRsaKeySize | 1.3.6.1.4.1.2272.1.34.1.5 | INTEGER | read-write | SSH Rsa key size. |
| INT rcSshGlobalDsaKeySize | 1.3.6.1.4.1.2272.1.34.1.6 | INTEGER | read-write | SSH Dsa key size. |
| T/F rcSshGlobalRsaAuth | 1.3.6.1.4.1.2272.1.34.1.7 | TruthValue | read-write | Enable/disable SSH RSA authentication |
| T/F rcSshGlobalDsaAuth | 1.3.6.1.4.1.2272.1.34.1.8 | TruthValue | read-write | Enable/disable SSH DSA authentication |
| T/F rcSshGlobalPassAuth | 1.3.6.1.4.1.2272.1.34.1.9 | TruthValue | read-write | Enable/disable SSH RSA authentication |
| INT rcSshGlobalKeyAction | 1.3.6.1.4.1.2272.1.34.1.10 | INTEGER | read-write | SSH key action. |
| INT rcSshGlobalEnable | 1.3.6.1.4.1.2272.1.34.1.11 | INTEGER | read-write | Enable/disable, or securely enable SSH. Securely enable turns off other daemon flag, and it takes ffect afte reboot |
| IP rcSshGlobalHostIpAddr | 1.3.6.1.4.1.2272.1.34.1.12 | IpAddress | read-write | current remote ip addr |
| rcSslMipTable | 1.3.6.1.4.1.2272.1.34.2 | not-accessible | This table would display the MIP of the SSL blade according to the slot number. | |
| rcSslMipTableEntry | 1.3.6.1.4.1.2272.1.34.2.1 | not-accessible | This table get the MIP of the SSL blade on which the blade is in different cluster. | |
| I32 rcSslMipSlot | 1.3.6.1.4.1.2272.1.34.2.1.1 | Integer32 | read-only | Used as an index to find out the MIP of SSL blade. |
| STR rcSslMipMip | 1.3.6.1.4.1.2272.1.34.2.1.2 | DisplayString | read-only | Master IP of the SSL blade. |
| rcSvlan | 1.3.6.1.4.1.2272.1.35 | |||
| rcSvlanGlobal | 1.3.6.1.4.1.2272.1.35.1 | |||
| INT rcSvlanActiveLevel | 1.3.6.1.4.1.2272.1.35.1.1 | INTEGER | read-write | Stacked Vlan active level. |
| rcSvlanTable | 1.3.6.1.4.1.2272.1.35.2 | not-accessible | A list of possible levels and their corresponding ether type. The number of entries is eight. | |
| rcSvlanEntry | 1.3.6.1.4.1.2272.1.35.2.1 | not-accessible | A Stacked Vlan table entry. | |
| INT rcSvlanId | 1.3.6.1.4.1.2272.1.35.2.1.1 | INTEGER | read-only | Row Index. |
| I32 rcSvlanLevel | 1.3.6.1.4.1.2272.1.35.2.1.2 | Integer32 | read-only | A value that identifies the switch level associated with this entry. |
| I32 rcSvlanEtherType | 1.3.6.1.4.1.2272.1.35.2.1.3 | Integer32 | read-write | The ether type value is used for svlan tagging. |
| rcTengEnet | 1.3.6.1.4.1.2272.1.50 | |||
| rcTengEnetStats | 1.3.6.1.4.1.2272.1.50.1 | |||
| rcTengDot3StatsTable | 1.3.6.1.4.1.2272.1.50.1.1 | not-accessible | Statistics for a collection of ethernet-like interfaces attached to a particular system. | |
| rcTengDot3StatsEntry | 1.3.6.1.4.1.2272.1.50.1.1.1 | not-accessible | Statistics for a particular interface to an ethernet-like medium. | |
| I32 rcTengDot3StatsIndex | 1.3.6.1.4.1.2272.1.50.1.1.1.1 | Integer32 | read-only | An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| C64 rcTengDot3StatsAlignmentErrors | 1.3.6.1.4.1.2272.1.50.1.1.1.2 | Counter64 | read-only | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. |
| C64 rcTengDot3StatsFCSErrors | 1.3.6.1.4.1.2272.1.50.1.1.1.3 | Counter64 | read-only | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. |
| C64 rcTengDot3StatsSingleCollisionFrames | 1.3.6.1.4.1.2272.1.50.1.1.1.4 | Counter64 | read-only | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsMultipleCollisionFrames object. |
| C64 rcTengDot3StatsMultipleCollisionFrames | 1.3.6.1.4.1.2272.1.50.1.1.1.5 | Counter64 | read-only | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object. |
| C64 rcTengDot3StatsSQETestErrors | 1.3.6.1.4.1.2272.1.50.1.1.1.6 | Counter64 | read-only | A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is described in section 7.2.4.6 of the same document. |
| C64 rcTengDot3StatsDeferredTransmissions | 1.3.6.1.4.1.2272.1.50.1.1.1.7 | Counter64 | read-only | A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions. |
| C64 rcTengDot3StatsLateCollisions | 1.3.6.1.4.1.2272.1.50.1.1.1.8 | Counter64 | read-only | The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10 Mbit/s system. A (late) collision included in a count represented by an instance of this object is also considered as a (generic) collision for purposes of other collision-related statistics. |
| C64 rcTengDot3StatsExcessiveCollisions | 1.3.6.1.4.1.2272.1.50.1.1.1.9 | Counter64 | read-only | A count of frames for which transmission on a particular interface fails due to excessive collisions. |
| C64 rcTengDot3StatsInternalMacTransmitErrors | 1.3.6.1.4.1.2272.1.50.1.1.1.10 | Counter64 | read-only | A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the rcTengDot3StatsLateCollisions object, the rcTengDot3StatsExcessiveCollisions object, or the rcTengDot3StatsCarrierSenseErrors object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of transmission errors on a particular interface that are not otherwise counted. |
| C64 rcTengDot3StatsCarrierSenseErrors | 1.3.6.1.4.1.2272.1.50.1.1.1.11 | Counter64 | read-only | The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count represented by an instance of this object is incremented at most once per transmission attempt, even if the carrier sense condition fluctuates during a transmission attempt. |
| C64 rcTengDot3StatsFrameTooLongs | 1.3.6.1.4.1.2272.1.50.1.1.1.13 | Counter64 | read-only | A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. |
| C64 rcTengDot3StatsInternalMacReceiveErrors | 1.3.6.1.4.1.2272.1.50.1.1.1.16 | Counter64 | read-only | A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the rcTengDot3StatsFrameTooLongs object, the rcTengDot3StatsAlignmentErrors object, or the rcTengDot3StatsFCSErrors object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted. |
| OID rcTengDot3StatsEtherChipSet | 1.3.6.1.4.1.2272.1.50.1.1.1.17 | OBJECT IDENTIFIER | read-only | This object contains an OBJECT IDENTIFIER which identifies the chipset used to realize the interface. Ethernet-like interfaces are typically built out of several different chips. The MIB implementor is presented with a decision of which chip to identify via this object. The implementor should identify the chip which is usually called the Medium Access Control chip. If no such chip is easily identifiable, the implementor should identify the chip which actually gathers the transmit and receive statistics and error indications. This would allow a manager station to correlate the statistics and the chip generating them, giving it the ability to take into account any known anomalies in the chip. |
| C32 rcTengDot3StatsLinkFailures | 1.3.6.1.4.1.2272.1.50.1.1.1.18 | Counter32 | read-only | The total number of link failures enCounter32ed on this interface. |
| C32 rcTengDot3StatsPacketErrors | 1.3.6.1.4.1.2272.1.50.1.1.1.19 | Counter32 | read-only | The total number of packet errors enCounter32ed on this interface. |
| C32 rcTengDot3StatsCarrierErrors | 1.3.6.1.4.1.2272.1.50.1.1.1.20 | Counter32 | read-only | The total number of carrier errors enCounter32ed on this interface. |
| C32 rcTengDot3StatsLinkInactiveErrors | 1.3.6.1.4.1.2272.1.50.1.1.1.21 | Counter32 | read-only | The total number of link inactive errors enCounter32ed on this interface. |
| C64 rcTengDot3StatsInFlowCtrlPkts | 1.3.6.1.4.1.2272.1.50.1.1.1.22 | Counter64 | read-only | The total number of flow control packets received by this interface. |
| C64 rcTengDot3StatsOutFlowCtrlPkts | 1.3.6.1.4.1.2272.1.50.1.1.1.23 | Counter64 | read-only | The total number of flow control packets transmitted by this interface. |
| C64 rcTengDot3StatsFrameTooShorts | 1.3.6.1.4.1.2272.1.50.1.1.1.24 | Counter64 | read-only | The total number of frames that are too short that were enCounter32ed on this interface. |
| rcTengStatTable | 1.3.6.1.4.1.2272.1.50.1.2 | not-accessible | A table used to store port statistics. | |
| rcTengStatEntry | 1.3.6.1.4.1.2272.1.50.1.2.1 | not-accessible | interface Counter32s | |
| I32 rcTengStatIndex | 1.3.6.1.4.1.2272.1.50.1.2.1.1 | Integer32 | read-only | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| C32 rcTengStatBridgeInUnicastFrames | 1.3.6.1.4.1.2272.1.50.1.2.1.2 | Counter32 | read-only | The total number of incoming unicast frames that were bridged. |
| C32 rcTengStatBridgeInMulticastFrames | 1.3.6.1.4.1.2272.1.50.1.2.1.3 | Counter32 | read-only | The total number of incoming multicast frames that were bridged. |
| C32 rcTengStatBridgeInBroadcastFrames | 1.3.6.1.4.1.2272.1.50.1.2.1.4 | Counter32 | read-only | The total number of incoming broadcast frames that were bridged. |
| C32 rcTengStatBridgeInDiscards | 1.3.6.1.4.1.2272.1.50.1.2.1.5 | Counter32 | read-only | The total number of frames that were discarded by the bridging entity. |
| C32 rcTengStatBridgeOutUnicastFrames | 1.3.6.1.4.1.2272.1.50.1.2.1.6 | Counter32 | read-only | The total number of outgoing unicast frames that were bridged. |
| C32 rcTengStatBridgeOutMulticastFrames | 1.3.6.1.4.1.2272.1.50.1.2.1.7 | Counter32 | read-only | The total number of outgoing multicast frames that were bridged. |
| C32 rcTengStatBridgeOutBroadcastFrames | 1.3.6.1.4.1.2272.1.50.1.2.1.8 | Counter32 | read-only | The total number of outgoing broadcast frames that were bridged. |
| C32 rcTengStatRouteInUnicastFrames | 1.3.6.1.4.1.2272.1.50.1.2.1.9 | Counter32 | read-only | The total number of incoming unicast frames that were routed. |
| C32 rcTengStatRouteInMulticastFrames | 1.3.6.1.4.1.2272.1.50.1.2.1.10 | Counter32 | read-only | The total number of incoming multicast frames that were routed. |
| C32 rcTengStatRouteInDiscards | 1.3.6.1.4.1.2272.1.50.1.2.1.11 | Counter32 | read-only | The total number of frames that were discarded by the routing entity. |
| C32 rcTengStatRouteOutUnicastFrames | 1.3.6.1.4.1.2272.1.50.1.2.1.12 | Counter32 | read-only | The total number of outgoing unicast frames that were routed. |
| C32 rcTengStatRouteOutMulticastFrames | 1.3.6.1.4.1.2272.1.50.1.2.1.13 | Counter32 | read-only | The total number of outgoing multicast frames that were routed. |
| C32 rcTengStatStgForwardTransitions | 1.3.6.1.4.1.2272.1.50.1.2.1.14 | Counter32 | read-only | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| C32 rcTengStatStgInConfigBpdus | 1.3.6.1.4.1.2272.1.50.1.2.1.15 | Counter32 | read-only | |
| C32 rcTengStatStgInTcnBpdus | 1.3.6.1.4.1.2272.1.50.1.2.1.16 | Counter32 | read-only | |
| C32 rcTengStatStgInBadBpdus | 1.3.6.1.4.1.2272.1.50.1.2.1.17 | Counter32 | read-only | |
| C32 rcTengStatStgOutConfigBpdus | 1.3.6.1.4.1.2272.1.50.1.2.1.18 | Counter32 | read-only | |
| C32 rcTengStatStgOutTcnBpdus | 1.3.6.1.4.1.2272.1.50.1.2.1.19 | Counter32 | read-only | |
| C32 rcTengStatBridgeOutFrames | 1.3.6.1.4.1.2272.1.50.1.2.1.20 | Counter32 | read-only | Used by the Accelar 8000 product family to account for all transmitted bridge unicast, broadcast, and multicast packets. The individual Counter32s are not supported. |
| rcTengIfTable | 1.3.6.1.4.1.2272.1.50.1.3 | not-accessible | A list of interface entries. The number of entries is given by the value of engIfNumber. | |
| rcTengIfEntry | 1.3.6.1.4.1.2272.1.50.1.3.1 | not-accessible | An entry containing management information applicable to a particular interface. | |
| NUM rcTengIfIndex | 1.3.6.1.4.1.2272.1.50.1.3.1.1 | InterfaceIndex | read-only | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. |
| STR rcTengIfDescr | 1.3.6.1.4.1.2272.1.50.1.3.1.2 | DisplayString | read-only | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software. |
| INT rcTengIfType | 1.3.6.1.4.1.2272.1.50.1.3.1.3 | INTEGER | read-only | The type of interface. Additional values for IfType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention. |
| I32 rcTengIfMtu | 1.3.6.1.4.1.2272.1.50.1.3.1.4 | Integer32 | read-only | The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface. |
| G32 rcTengIfSpeed | 1.3.6.1.4.1.2272.1.50.1.3.1.5 | Gauge32 | read-only | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero. |
| PHY rcTengIfPhysAddress | 1.3.6.1.4.1.2272.1.50.1.3.1.6 | PhysAddress | read-only | The interface's address at its protocol sub-layer. The interface's media-specific MIB must define the bit and byte ordering and format of the value contained by this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length. |
| INT rcTengIfAdminStatus | 1.3.6.1.4.1.2272.1.50.1.3.1.7 | INTEGER | read-write | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces start with IfAdminStatus in the down(2) state. As a result of either explicit management action or per configuration information retained by the managed system, IfAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state). |
| INT rcTengIfOperStatus | 1.3.6.1.4.1.2272.1.50.1.3.1.8 | INTEGER | read-only | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If IfAdminStatus is down(2) then IfOperStatus should be down(2). If IfAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should change to dormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incomming connection); it should remain in the down(2) state if and only if there is a fault that prevents if from going to the up(1) state. |
| TIK rcTengIfLastChange | 1.3.6.1.4.1.2272.1.50.1.3.1.9 | TimeTicks | read-only | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| C64 rcTengIfInOctets | 1.3.6.1.4.1.2272.1.50.1.3.1.10 | Counter64 | read-only | The total number of octets received on the interface, including framing characters. |
| C64 rcTengIfInUcastPkts | 1.3.6.1.4.1.2272.1.50.1.3.1.11 | Counter64 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. |
| C64 rcTengIfInNUcastPkts | 1.3.6.1.4.1.2272.1.50.1.3.1.12 | Counter64 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. This object is deprecated in favour of IfInMulticastPkts and IfInBroadcastPkts. |
| C64 rcTengIfInDiscards | 1.3.6.1.4.1.2272.1.50.1.3.1.13 | Counter64 | read-only | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. |
| C64 rcTengIfInErrors | 1.3.6.1.4.1.2272.1.50.1.3.1.14 | Counter64 | read-only | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. |
| C64 rcTengIfInUnknownProtos | 1.3.6.1.4.1.2272.1.50.1.3.1.15 | Counter64 | read-only | For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces which support protocol multiplexing the number of transmission units received via the interface which were discarded because of an unknown or unsupported protocol. For any interface which does not support protocol multiplexing, this counter will always be 0. |
| C64 rcTengIfOutOctets | 1.3.6.1.4.1.2272.1.50.1.3.1.16 | Counter64 | read-only | The total number of octets transmitted out of the interface, including framing characters. |
| C64 rcTengIfOutUcastPkts | 1.3.6.1.4.1.2272.1.50.1.3.1.17 | Counter64 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. |
| C64 rcTengIfOutNUcastPkts | 1.3.6.1.4.1.2272.1.50.1.3.1.18 | Counter64 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is deprecated in favour of IfOutMulticastPkts and IfOutBroadcastPkts. |
| C64 rcTengIfOutDiscards | 1.3.6.1.4.1.2272.1.50.1.3.1.19 | Counter64 | read-only | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. |
| C64 rcTengIfOutErrors | 1.3.6.1.4.1.2272.1.50.1.3.1.20 | Counter64 | read-only | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. |
| G32 rcTengIfOutQLen | 1.3.6.1.4.1.2272.1.50.1.3.1.21 | Gauge32 | read-only | The length of the output packet queue (in packets). |
| OID rcTengIfSpecific | 1.3.6.1.4.1.2272.1.50.1.3.1.22 | OBJECT IDENTIFIER | read-only | A reference to MIB definitions specific to the particular media being used to realize the interface. It is recommended that this value point to an instance of a MIB object in the media-specific MIB, i.e., that this object have the semantics associated with the InstancePointer textual convention defined in RFC 1443. In fact, it is recommended that the media- specific MIB specify what value ifSpecific should/can take for values of ifType. If no MIB definitions specific to the particular media are available, the value should be set to the OBJECT IDENTIFIER { 0 0 }. |
| rcTengIfXTable | 1.3.6.1.4.1.2272.1.50.1.4 | not-accessible | A list of interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table. | |
| rcTengIfXEntry | 1.3.6.1.4.1.2272.1.50.1.4.1 | not-accessible | An entry containing additional management information applicable to a particular interface. | |
| NUM rcTengIfXIndex | 1.3.6.1.4.1.2272.1.50.1.4.1.1 | InterfaceIndex | read-only | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. |
| STR rcTengIfName | 1.3.6.1.4.1.2272.1.50.1.4.1.2 | DisplayString | read-only | The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `le0' or a simple port number, such as `1', depending on the interface naming syntax of the device. If several entries in the rcTengIfTable together represent a single interface as named by the device, then each will have the same value of rcTengIfName. If there is no local name, or this object is otherwise not applicable, then this object contains a 0-length string. |
| C64 rcTengIfInMulticastPkts | 1.3.6.1.4.1.2272.1.50.1.4.1.3 | Counter64 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. |
| C64 rcTengIfInBroadcastPkts | 1.3.6.1.4.1.2272.1.50.1.4.1.4 | Counter64 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. |
| C64 rcTengIfOutMulticastPkts | 1.3.6.1.4.1.2272.1.50.1.4.1.5 | Counter64 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. |
| C64 rcTengIfOutBroadcastPkts | 1.3.6.1.4.1.2272.1.50.1.4.1.6 | Counter64 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. |
| C64 rcTengIfHCInOctets | 1.3.6.1.4.1.2272.1.50.1.4.1.7 | Counter64 | read-only | The total number of octets received on the interface, including framing characters. This object is a 64-bit version of rcTengIfInOctets. |
| C64 rcTengIfHCInUcastPkts | 1.3.6.1.4.1.2272.1.50.1.4.1.8 | Counter64 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of rcTengIfInUcastPkts. |
| C64 rcTengIfHCInMulticastPkts | 1.3.6.1.4.1.2272.1.50.1.4.1.9 | Counter64 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of rcTengIfInMulticastPkts. |
| C64 rcTengIfHCInBroadcastPkts | 1.3.6.1.4.1.2272.1.50.1.4.1.10 | Counter64 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of IfInBroadcastPkts. |
| C64 rcTengIfHCOutOctets | 1.3.6.1.4.1.2272.1.50.1.4.1.11 | Counter64 | read-only | The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of rcTengIfOutOctets. |
| C64 rcTengIfHCOutUcastPkts | 1.3.6.1.4.1.2272.1.50.1.4.1.12 | Counter64 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of rcTengIfOutUcastPkts. |
| C64 rcTengIfHCOutMulticastPkts | 1.3.6.1.4.1.2272.1.50.1.4.1.13 | Counter64 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of rcTengIfOutMulticastPkts. |
| C64 rcTengIfHCOutBroadcastPkts | 1.3.6.1.4.1.2272.1.50.1.4.1.14 | Counter64 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of rcTengIfOutBroadcastPkts. |
| INT rcTengIfLinkUpDownTrapEnable | 1.3.6.1.4.1.2272.1.50.1.4.1.15 | INTEGER | read-write | Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the rcTengIfStackTable), and disabled(2) otherwise. |
| G32 rcTengIfHighSpeed | 1.3.6.1.4.1.2272.1.50.1.4.1.16 | Gauge32 | read-only | An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to `n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero. |
| T/F rcTengIfPromiscuousMode | 1.3.6.1.4.1.2272.1.50.1.4.1.17 | TruthValue | read-write | This object has a value of false(2) If this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when the station accepts all packets/frames transmitted on the media. The value true(1) is only legal on certain types of media. If legal, setting this object to a value of true(1) may require the interface to be reset before becoming effective. The value of rcTengIfPromiscuousMode does not affect the reception of broadcast and multicast packets/frames by the interface. |
| T/F rcTengIfConnectorPresent | 1.3.6.1.4.1.2272.1.50.1.4.1.18 | TruthValue | read-only | This object has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise. |
| rcWisTrap | 1.3.6.1.4.1.2272.1.50.2 | |||
| INT rcWisSonetTrapType | 1.3.6.1.4.1.2272.1.50.2.1 | INTEGER | read-only | Used to indicate a particular type of 10GE Sonet trap. |
| INT rcWisSonetTrapIndication | 1.3.6.1.4.1.2272.1.50.2.2 | INTEGER | read-only | Used to indicate an indication for a 10GE Sonet trap. |
| rcRec | 1.3.6.1.4.1.2272.1.51 | |||
| rcRecReservTable | 1.3.6.1.4.1.2272.1.51.1 | not-accessible | This table would display the statistics of several HW record type used. This will also let the user reserve certain number of records for each type. | |
| rcRecReservTablEntry | 1.3.6.1.4.1.2272.1.51.1.1 | not-accessible | ||
| INT rcRecReservRecordType | 1.3.6.1.4.1.2272.1.51.1.1.1 | INTEGER | read-only | . |
| I32 rcRecReservUsed | 1.3.6.1.4.1.2272.1.51.1.1.2 | Integer32 | read-only | Displayes the number of HW records actually usee by the recordType. |
| I32 rcRecReservReserved | 1.3.6.1.4.1.2272.1.51.1.1.3 | Integer32 | read-only | Displayes the number of HW records reserved for the recordType. |
| I32 rcRecReservNewReserved | 1.3.6.1.4.1.2272.1.51.1.1.4 | Integer32 | read-write | Displayes the number of HW records that w ill be reserved for this recordType after reset if the configuration is saved. |
| I32 rcRecReservDefReserved | 1.3.6.1.4.1.2272.1.51.1.1.5 | Integer32 | read-only | Number of records reserved for this recordType if loaded with factory default. |
| rcLacp | 1.3.6.1.4.1.2272.1.53 | |||
| rcLacpGlobal | 1.3.6.1.4.1.2272.1.53.1 | |||
| T/F rcLacpGlobalEnable | 1.3.6.1.4.1.2272.1.53.1.1 | TruthValue | read-write | globally enable/disable LACP |
| I32 rcLacpGlobalSystemPriority | 1.3.6.1.4.1.2272.1.53.1.2 | Integer32 | read-write | set system priority to all the LACP enabled aggregators and prots |
| INT rcLacpGlobalFastPeriodicTime | 1.3.6.1.4.1.2272.1.53.1.3 | INTEGER | read-write | The number of miliseconds between periodic transmissions using Short Timeouts. Set this value to all LACP enabled ports. |
| INT rcLacpGlobalSlowPeriodicTime | 1.3.6.1.4.1.2272.1.53.1.4 | INTEGER | read-write | The number of miliseconds between periodic transmissions using LONG Timeouts. Set this value to all LACP enabled ports. |
| INT rcLacpGlobalTimeoutScale | 1.3.6.1.4.1.2272.1.53.1.5 | INTEGER | read-write | Scalar value used to calculate timeout time from periodic time. Set this value to all LACP enabled ports. |
| INT rcLacpGlobalAggrWaitTime | 1.3.6.1.4.1.2272.1.53.1.6 | INTEGER | read-write | The number of mili seconds to delay aggregation to allow multiple links to aggregate simultaneously. |
| T/F rcLacpGlobalVlacpEnable | 1.3.6.1.4.1.2272.1.53.1.7 | TruthValue | read-write | globally enable/disable Virtual LACP |
| INT rcLacpGlobalFastPeriodicTimeOper | 1.3.6.1.4.1.2272.1.53.1.9 | INTEGER | read-only | The operating value of global fast periodic timer. |
| INT rcLacpGlobalSlowPeriodicTimeOper | 1.3.6.1.4.1.2272.1.53.1.10 | INTEGER | read-only | The operating value of global show periodic time. |
| INT rcLacpGlobalTimeoutScaleOper | 1.3.6.1.4.1.2272.1.53.1.11 | INTEGER | read-only | The operating value of global timeout scale. |
| INT rcLacpGlobalAggrWaitTimeOper | 1.3.6.1.4.1.2272.1.53.1.12 | INTEGER | read-only | The operating value of global aggregate wait time. |
| MAC rcLacpGlobalSmltSysId | 1.3.6.1.4.1.2272.1.53.1.13 | MacAddress | read-write | LACP system ID for SMLT |
| I32 rcLacpGlobalVlacpHoldTime | 1.3.6.1.4.1.2272.1.53.1.15 | Integer32 | read-write | The number of seconds to hold down all vlacp enabled links |
| rcLicense | 1.3.6.1.4.1.2272.1.56 | |||
| INT rcLicenseNumber | 1.3.6.1.4.1.2272.1.56.1 | INTEGER | read-only | Bit position number of license bitmap |
| OCT rcLicenseBitMap | 1.3.6.1.4.1.2272.1.56.2 | OCTET STRING | read-only | License bit map. Bitmap number is defined in rcLicenseNumber |
| rcEap | 1.3.6.1.4.1.2272.1.57 | |||
| rcFdb | 1.3.6.1.4.1.2272.1.60 | |||
| rcGlobalMacFilterTable | 1.3.6.1.4.1.2272.1.60.1 | not-accessible | A list of Global Mac filter entries. | |
| rcGlobalMacFilterEntry | 1.3.6.1.4.1.2272.1.60.1.1 | not-accessible | this entry is used for global mac filtering.Any Mac address configured here will be discarded globally by the switch. | |
| MAC rcGlobalMacFilterAddress | 1.3.6.1.4.1.2272.1.60.1.1.1 | MacAddress | not-accessible | A MAC address which will be discarded globally by the switch |
| ROW rcGlobalMacFilterRowStatus | 1.3.6.1.4.1.2272.1.60.1.1.2 | RowStatus | read-write | Used to create/delete entries in rcGlobalMacFilterTable. |
| rcIpv6 | 1.3.6.1.4.1.2272.1.62 | |||
| rcIpv6Mib | 1.3.6.1.4.1.2272.1.62.1 | |||
| rcIpv6Notifications | 1.3.6.1.4.1.2272.1.62.1.0 | |||
| rcIpv6Objects | 1.3.6.1.4.1.2272.1.62.1.1 | |||
| rcIpv6Scalars | 1.3.6.1.4.1.2272.1.62.1.1.1 | |||
| INT rcIpv6IcmpErrorInterval | 1.3.6.1.4.1.2272.1.62.1.1.1.1 | INTEGER | read-write | The rate (in milliseconds) at which ICMP error messages can be sent out. A value of zero means not be send any. |
| T/F rcIpv6MulticastAdminStatus | 1.3.6.1.4.1.2272.1.62.1.1.1.2 | TruthValue | read-write | This indicates the global admin status for multicast. |
| T/F rcIpv6IcmpNetUnreach | 1.3.6.1.4.1.2272.1.62.1.1.1.3 | TruthValue | read-write | Used to set icmp net unreach feature enable/ disable. |
| T/F rcIpv6IcmpRedirectMsg | 1.3.6.1.4.1.2272.1.62.1.1.1.4 | TruthValue | read-write | Used to set icmp redirect feature enable/ disable. |
| INT rcIpv6IcmpErrorQuota | 1.3.6.1.4.1.2272.1.62.1.1.1.5 | INTEGER | read-write | The number of icmp error messages that can be sent during the icmp error interval. A value of zero means not be send any. |
| U32 rcIpv6PrefixListTableSize | 1.3.6.1.4.1.2272.1.62.1.1.1.8 | Unsigned32 | read-only | Size of Ipv6 Prefix List Table |
| rcIpv6InterfaceTable | 1.3.6.1.4.1.2272.1.62.1.1.2 | not-accessible | This table contains list of IPv6 interfaces and per-interface IPv6-specific information. | |
| rcIpv6InterfaceEntry | 1.3.6.1.4.1.2272.1.62.1.1.2.1 | not-accessible | An entry of ipv6 interface In Table containing per-interface information. | |
| NUM rcIpv6InterfaceIfIndex | 1.3.6.1.4.1.2272.1.62.1.1.2.1.1 | InterfaceIndex | not-accessible | An unique value to identify a physical interface or a logical interface (VLAN). For the brouter port it is the ifindex of the port and in the case of the vlan it is the ifindex of the vlan. |
| ADR rcIpv6InterfaceIdentifier | 1.3.6.1.4.1.2272.1.62.1.1.2.1.2 | Ipv6AddressIfIdentifier | read-create | IPv6 address interface identifiers. This is a binary string of up to 8 octets in network byte-order. |
| INT rcIpv6InterfaceIdentifierLength | 1.3.6.1.4.1.2272.1.62.1.1.2.1.3 | INTEGER | read-create | The length of the Interface Identifier in bits. |
| STR rcIpv6InterfaceDescr | 1.3.6.1.4.1.2272.1.62.1.1.2.1.4 | DisplayString | read-create | A textual string containing information about the interface. This string may be set by network management system. |
| INT rcIpv6InterfaceVlanId | 1.3.6.1.4.1.2272.1.62.1.1.2.1.5 | INTEGER | read-create | A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag. |
| INT rcIpv6InterfaceType | 1.3.6.1.4.1.2272.1.62.1.1.2.1.6 | INTEGER | read-only | The interface type. |
| INT rcIpv6InterfaceReasmMaxSize | 1.3.6.1.4.1.2272.1.62.1.1.2.1.7 | INTEGER | read-create | MTU for this IPv6 interface, this value should be same for all the ip addresses defined on this interface. |
| PHY rcIpv6InterfacePhysAddress | 1.3.6.1.4.1.2272.1.62.1.1.2.1.8 | PhysAddress | read-only | The media-dependent `physical' address, for the ethernet media it is the MAC address |
| T/F rcIpv6InterfaceAdminStatus | 1.3.6.1.4.1.2272.1.62.1.1.2.1.9 | TruthValue | read-create | The indication of whether IPv6 is enabled (up) or disabled (down) on this interface. This object does not affect the state of the interface itself, only its connection to an IPv6 stack. |
| INT rcIpv6InterfaceOperStatus | 1.3.6.1.4.1.2272.1.62.1.1.2.1.10 | INTEGER | read-only | Operating status of the interface. |
| INT rcIpv6InterfaceReachableTime | 1.3.6.1.4.1.2272.1.62.1.1.2.1.11 | INTEGER | read-create | The time (in milliseconds) a neighbor is considered reachable after receiving a reachability confirmation. REFERENCE RFC2461, Section 6.3.2 |
| INT rcIpv6InterfaceRetransmitTime | 1.3.6.1.4.1.2272.1.62.1.1.2.1.12 | INTEGER | read-create | The time (in milliseconds) between retransmissions of Neighbor Solicitation messages to a neighbor when resolving the address or when probing the reachability of a neighbor. REFERENCE RFC2461, Section 6.3.2 |
| T/F rcIpv6InterfaceMulticastAdminStatus | 1.3.6.1.4.1.2272.1.62.1.1.2.1.13 | TruthValue | read-create | This indicates the admin status for multicast for this interface. |
| ROW rcIpv6InterfaceRowStatus | 1.3.6.1.4.1.2272.1.62.1.1.2.1.14 | RowStatus | read-create | Row status for create/delete. |
| T/F rcIpv6InterfaceDhcpEnabled | 1.3.6.1.4.1.2272.1.62.1.1.2.1.15 | TruthValue | read-create | Enable or disable DHCP on the specified interface. |
| I32 rcIpv6InterfaceMacOffset | 1.3.6.1.4.1.2272.1.62.1.1.2.1.16 | Integer32 | read-create | Used to request a particular MAC for an IPv6 VLAN. Analogous to rcIpAdEntMacOffset in rcIpAddrTable. The system has 512 mac addresses of which 0-507 are reserved for Boardwalk box. 508-511 is reserved for MG. One can either mention a mac offset while configuring IPv6 on a vlan or it can be alloted by the system within the above range. |
| rcIpv6AddressTable | 1.3.6.1.4.1.2272.1.62.1.1.3 | not-accessible | This table contains addressing information relevant to the entity's interfaces. This table does not contain multicast address information. Tables for such information should be contained in multicast specific MIBs such as RFC3019. While this table is writable the user will note that several objects, such as rcIpv6AddressOrigin, are not. The intention in allowing a user to write to this table is to allow them to add or remove any entry that isn't permanent. The user should be allowed to modify objects and entries when that would not cause inconsistencies within the table. Allowing write access to objects such as rcIpv6AddressOrigin could allow a user to insert an entry and then label it incorrectly. | |
| rcIpv6AddressEntry | 1.3.6.1.4.1.2272.1.62.1.1.3.1 | not-accessible | An address mapping for a particular interface. Note that when an address is added to an interface the resulted prefix is added to that interface. | |
| NUM rcIpv6AddressIfIndex | 1.3.6.1.4.1.2272.1.62.1.1.3.1.1 | InterfaceIndex | not-accessible | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IfIndex field in the rcIpv6InterfaceIfIndex. |
| ADR rcIpv6AddressAddr | 1.3.6.1.4.1.2272.1.62.1.1.3.1.2 | Ipv6Address | not-accessible | The IPv6 address to which this entry's addressing information pertains. This is one of the ipv6 addresses that this interface(identified by the rcIpv6AddressIfIndex) has. Implementors need to be aware that if the size of ipAddressAddr exceeds 116 octets then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c or SNMPv3. |
| INT rcIpv6AddressType | 1.3.6.1.4.1.2272.1.62.1.1.3.1.3 | INTEGER | read-write | The type of address. It is either unicast or anycast IPv6 addresses (RFC3513). |
| INT rcIpv6AddressPrefixLength | 1.3.6.1.4.1.2272.1.62.1.1.3.1.4 | INTEGER | read-write | Prefix Length value for this address. Cannot be changed after the creation. This field MUST be provided in order to create an entry in this table. |
| NUM rcIpv6AddressPrefix | 1.3.6.1.4.1.2272.1.62.1.1.3.1.5 | RowPointer | read-only | A pointer to the row in the prefix table to which this address belongs. May be { 0 0 } if there is no such row. |
| NUM rcIpv6AddressOrigin | 1.3.6.1.4.1.2272.1.62.1.1.3.1.6 | IpAddressOriginTC | read-only | The origin of the address. The origin of the address, one of: other(1),manual(2), dhcp(4),linklayer(5), random(6) |
| ADR rcIpv6AddressStatus | 1.3.6.1.4.1.2272.1.62.1.1.3.1.7 | IpAddressStatusTC | read-only | The status of the address, describing if the address can be used for communication. It will One of: preferred(1), deprecated(2),invalid(3),inaccessible(4),unknown(5), tentative(6), duplicate(7) |
| TIM rcIpv6AddressCreated | 1.3.6.1.4.1.2272.1.62.1.1.3.1.8 | TimeStamp | read-only | The value of sysUpTime at the time this entry was created. If this entry was created prior to the last re- initialization of the local network management subsystem, then this object contains a zero value. |
| TIM rcIpv6AddressLastChanged | 1.3.6.1.4.1.2272.1.62.1.1.3.1.9 | TimeStamp | read-only | The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value. |
| ROW rcIpv6AddressRowStatus | 1.3.6.1.4.1.2272.1.62.1.1.3.1.10 | RowStatus | read-create | The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on whether other objects in this conceptual row can be modified. A conceptual row can not be made active until the rcIpv6AddressIfIndex has been set to a valid index. Only createAndGo and Delete vlaues are supported. |
| rcIpv6PrefixTable | 1.3.6.1.4.1.2272.1.62.1.1.4 | not-accessible | This table allows the user to determine the source of an IP address or set of IP addresses and allows other tables to share the information via pointer rather than by copying. For example when the node configures both a unicast and anycast address for a prefix the ipAddressPrefix objects for those addresses will point to a single row in this table. This table primarily provides support for IPv6 prefixes and several of the objects are less meaningful for IPv4. The table continues to allow IPv4 addresses to allow future flexibility. In order to promote a common configuration this document includes suggestions for default values for IPv4 prefixes. Each of these values may be overridden if an object is meaningful to the node. All prefixes used by this entity should be included in this table independent of how the entity learned the prefix. (This table isn't limited to prefixes learned from router advertisements.) | |
| rcIpv6PrefixEntry | 1.3.6.1.4.1.2272.1.62.1.1.4.1 | not-accessible | An entry of ipv6 prefix In the Table. | |
| NUM rcIpv6PrefixIfIndex | 1.3.6.1.4.1.2272.1.62.1.1.4.1.1 | InterfaceIndex | not-accessible | An unique value to identify an ipv6 interface. For the brouter port it is the ifindex of the port and in the case of the vlan it is the ifindex of the vlan. |
| ADR rcIpv6PrefixAddr | 1.3.6.1.4.1.2272.1.62.1.1.4.1.2 | Ipv6Address | not-accessible | Prefix to create an ipv6 address in ipv6 interface table. |
| INT rcIpv6PrefixLength | 1.3.6.1.4.1.2272.1.62.1.1.4.1.3 | INTEGER | not-accessible | Mask to create an ipv6 prefix entry either will be advertised or suppressed |
| INT rcIpv6PrefixVlanId | 1.3.6.1.4.1.2272.1.62.1.1.4.1.4 | INTEGER | read-only | A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag. |
| INT rcIpv6PrefixUseDefaultVal | 1.3.6.1.4.1.2272.1.62.1.1.4.1.5 | INTEGER | read-write | Select one of the value to set/use it's value to default value. This is a bitmask field, setting all the bits means that all the options will be reverted to default values. |
| I32 rcIpv6PrefixValidLife | 1.3.6.1.4.1.2272.1.62.1.1.4.1.6 | Integer32 | read-write | Deprecated. Use rcIpv6PrefixValidLifetime instead. |
| I32 rcIpv6PrefixPreferredLife | 1.3.6.1.4.1.2272.1.62.1.1.4.1.7 | Integer32 | read-write | Deprecated. Use rcIpv6PrefixPreferredLifetime instead. |
| DAT rcIpv6PrefixAtValidLife | 1.3.6.1.4.1.2272.1.62.1.1.4.1.8 | DateAndTime | read-write | Is the date and time, upon reaching this value the prefix will be expired, if configured this option will be included in the neighbor advertisement for this prefix. |
| DAT rcIpv6PrefixAtPreferredLife | 1.3.6.1.4.1.2272.1.62.1.1.4.1.9 | DateAndTime | read-write | Is the date and time, upon reaching this value the prefix will be expired, if configured this option will be included in the neighbor advertisement for this prefix. |
| T/F rcIpv6PrefixInfinite | 1.3.6.1.4.1.2272.1.62.1.1.4.1.10 | TruthValue | read-write | Deprecated. |
| T/F rcIpv6PrefixOnLinkFlag | 1.3.6.1.4.1.2272.1.62.1.1.4.1.11 | TruthValue | read-write | if set then this prefix can be used for onlink determination. This value be placed in the L-bit field in the prefix information option. It is a 1 bit flag. |
| T/F rcIpv6PrefixAutoFlag | 1.3.6.1.4.1.2272.1.62.1.1.4.1.12 | TruthValue | read-write | if set then this prefix can be used for autonomous address config. This value be placed in the auto-flag field in the prefix information option. It is a 1 bit flag. |
| INT rcIpv6PrefixAddressEui | 1.3.6.1.4.1.2272.1.62.1.1.4.1.13 | INTEGER | read-write | Use an EUI-64 interface ID in the low-order 64bits of the address when not specified in the address field. If enabled use EUI, otherwise use EUI-64 and complement U/L (Universal/Local bit). This operation should be allowed for both global and link local addresses. Once the entry is create cannot modify this field. This will be valid to use only when the PrefixLength is 64 or less |
| T/F rcIpv6PrefixNoAdvertise | 1.3.6.1.4.1.2272.1.62.1.1.4.1.14 | TruthValue | read-write | if set then this prefix can not be included in the neighbor advertisement. |
| ROW rcIpv6PrefixRowStatus | 1.3.6.1.4.1.2272.1.62.1.1.4.1.15 | RowStatus | read-create | Row status for create/delete. |
| U32 rcIpv6PrefixValidLifetime | 1.3.6.1.4.1.2272.1.62.1.1.4.1.16 | Unsigned32 | read-create | Valid lifetime in seconds, indicates how long this prefix advertised in the nbr advertisement is valid. Value of 4294967295 represents infinity. |
| U32 rcIpv6PrefixPreferredLifetime | 1.3.6.1.4.1.2272.1.62.1.1.4.1.17 | Unsigned32 | read-create | Preferred lifetime in seconds, indicates how long this prefix advertised in advertisemt for this prefix. Value of 4294967295 represents infinity. |
| rcIpv6RouterAdvertTable | 1.3.6.1.4.1.2272.1.62.1.1.5 | not-accessible | The table containing information used to construct router advertisements. | |
| rcIpv6RouterAdvertEntry | 1.3.6.1.4.1.2272.1.62.1.1.5.1 | not-accessible | An entry containing information used to construct router advertisements. | |
| NUM rcIpv6RouterAdvertIfIndex | 1.3.6.1.4.1.2272.1.62.1.1.5.1.1 | InterfaceIndex | not-accessible | An unique value to identify an ipv6 interface. For the brouter port it is the ifindex of the port and in the case of the vlan it is the ifindex of the vlan. |
| T/F rcIpv6RouterAdvertSendAdverts | 1.3.6.1.4.1.2272.1.62.1.1.5.1.2 | TruthValue | read-write | A flag indicating whether or not the router sends periodic router advertisements and responds to router solicitations on this interface. REFERENCE RFC2461 Section 6.2.1 |
| INT rcIpv6RouterAdvertUseDefaultVal | 1.3.6.1.4.1.2272.1.62.1.1.5.1.3 | INTEGER | read-write | Select one of the value to set/use it's value to default value, or set all the bits to indicate all the options will be set to their default value. |
| INT rcIpv6RouterAdvertMaxInterval | 1.3.6.1.4.1.2272.1.62.1.1.5.1.4 | INTEGER | read-write | Configure the max interval (in seconds) at which the transmission of route advertisments can occur on this interface. This must be no less than 4 seconds and no greater than 1800. |
| INT rcIpv6RouterAdvertMinInterval | 1.3.6.1.4.1.2272.1.62.1.1.5.1.5 | INTEGER | read-write | Configure the min interval (in seconds) at which the transmission of route advertisments can occur on this interface. This must be no less than 3 seconds and no greater than .75* max-interval. |
| INT rcIpv6RouterAdvertReachableTime | 1.3.6.1.4.1.2272.1.62.1.1.5.1.6 | INTEGER | read-only | The value (in milliseconds) to be placed in the router advertisement message sent by the router. The value zero means unspecified (by this router). Used to configure the amount of time that a remote IPv6 node is considered reachable after some reachability confirmation event has occured. REFERENCE RFC2461 Section 6.2.1 |
| INT rcIpv6RouterAdvertRetransmitTimer | 1.3.6.1.4.1.2272.1.62.1.1.5.1.7 | INTEGER | read-only | The value (in milliseconds) to be placed in the retransmit timer field in router advertisement message sent from this interface. The value zero means unspecified (by this router). Used to configure the amount of time that router should wait for the transmit to occur. REFERENCE RFC2461 Section 6.2.1 |
| INT rcIpv6RouterAdvertDefaultLifeTime | 1.3.6.1.4.1.2272.1.62.1.1.5.1.8 | INTEGER | read-write | The value to be placed in the router lifetime field of router advertisements sent from this interface. This value MUST be either 0 or between rcIpv6RouterAdvertMaxInterval and 9000 seconds. A value of zero indicates that the router is not to be used as a default router. The default is 3 * rcIpv6RouterAdvertMaxInterval. REFERENCE RFC2461 Section 6.2.1 |
| INT rcIpv6RouterAdvertCurHopLimit | 1.3.6.1.4.1.2272.1.62.1.1.5.1.9 | INTEGER | read-write | The default value to be placed in the current hop limit field in router advertisements sent from this interface. The value should be set to the current diameter of the Internet. A value of zero in the router advertisement indicates that the advertisement isn't specifying a value for curHopLimit. The default should be set to the value specified in the IANA web pages (www.iana.org) at the time of implementation. REFERENCE RFC2461 Section 6.2.1 |
| T/F rcIpv6RouterAdvertManagedFlag | 1.3.6.1.4.1.2272.1.62.1.1.5.1.10 | TruthValue | read-write | if true then the M-bit(Managed address configureation) in the router adverisement will be set. REFERENCE RFC2461 Section 6.2.1 |
| T/F rcIpv6RouterAdvertOtherConfigFlag | 1.3.6.1.4.1.2272.1.62.1.1.5.1.11 | TruthValue | read-write | if true then the O-bit (Other stateful Configuration) in the router adverisement will be set. REFERENCE RFC2461 Section 6.2.1 |
| INT rcIpv6RouterAdvertDadNsNum | 1.3.6.1.4.1.2272.1.62.1.1.5.1.12 | INTEGER | read-write | The number of neighbor solicitation messages for DAD (Duplicate address detection). A value 0 is used to disable DAD process on this interface. A value 1 is used to send one advertisment without any retransmissions. |
| U32 rcIpv6RouterAdvertLinkMTU | 1.3.6.1.4.1.2272.1.62.1.1.5.1.13 | Unsigned32 | read-only | The value to be placed in MTU options sent by the router on this interface. A value of zero indicates that no MTU options are sent. REFERENCE RFC2461 Section 6.2.1 |
| rcIpv6StaticRouteTable | 1.3.6.1.4.1.2272.1.62.1.1.6 | not-accessible | This table contains list of routes that are created by the user to destination networks. | |
| rcIpv6StaticRouteEntry | 1.3.6.1.4.1.2272.1.62.1.1.6.1 | not-accessible | An entry in the static route table for IPv6 can be created for a destination with a specific prefix length; multiple entries to the same destination are created either by specifying the next-hop or interfaceIndex or both to reach the destination. However if the nexthop Ipv6 address is a link-local address then IfIndex must be supplied. | |
| ADR rcIpv6StaticRouteDest | 1.3.6.1.4.1.2272.1.62.1.1.6.1.1 | Ipv6Address | not-accessible | The destination IPv6 address of this route. The values for the index objects rcIpv6StaticRouteDest and rcIpv6StaticRoutePrefixLength must be consistent. When the value of rcIpv6StaticRouteDest (excluding the zone index, if one is present) is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object rcIpv6StaticRoutePrefixLength MUST be equal to x. If not, then the index pair is not consistent and an inconsistentName error must be returned on SET or CREATE requests. |
| INT rcIpv6StaticRoutePrefixLength | 1.3.6.1.4.1.2272.1.62.1.1.6.1.2 | INTEGER | not-accessible | Indicates the number of leading one bits which form the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpv6StaticRouteDestAddr field. |
| ADR rcIpv6StaticRouteNextHop | 1.3.6.1.4.1.2272.1.62.1.1.6.1.3 | Ipv6Address | not-accessible | Next hop IPv6 address for this destination. On remote routes, the address of the next system en route. For non-remote routes, a zero length string. |
| NUM rcIpv6StaticRouteIfIndex | 1.3.6.1.4.1.2272.1.62.1.1.6.1.4 | InterfaceIndex | not-accessible | The ifIndex value which identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scenario where no interface is specified. |
| INT rcIpv6StaticRouteDistance | 1.3.6.1.4.1.2272.1.62.1.1.6.1.5 | INTEGER | read-write | cost/distance to reach the destination for this node. |
| INT rcIpv6StaticRouteStatus | 1.3.6.1.4.1.2272.1.62.1.1.6.1.6 | INTEGER | read-only | (1)notReachable means the route is not reachable and no neighbor request entry is built to resolved the next-hop. It happens when there is no route or neighbor to reach the static route's next-hop. (2)tryToResolve means the route is not reachable but a neighbor request entry is built to resolved the next-hop. It happens when there is a local equivelent route in system to reach the next-hop but the neighor is not learnt yet (3)reachableNotInRtm means the static route is reachable but it is not in RTM. It happens when the static route is reachable, but it is not the best among alternative static route. (4)reachableInRtm means the static route is reachable and it is in RTM. It happens when the static route is reachable, and it is the best among alternative static route to be added into RTM. |
| INT rcIpv6StaticRoutePreference | 1.3.6.1.4.1.2272.1.62.1.1.6.1.7 | INTEGER | read-write | Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest preference will be used instead of a lower preference one. The higher the number, the higher the preference. |
| T/F rcIpv6StaticRouteEnable | 1.3.6.1.4.1.2272.1.62.1.1.6.1.8 | TruthValue | read-write | Used to enable/disable this entry. |
| ROW rcIpv6StaticRouteRowStatus | 1.3.6.1.4.1.2272.1.62.1.1.6.1.9 | RowStatus | read-create | Row status for create/delete. |
| rcIpv6NetToPhysicalTable | 1.3.6.1.4.1.2272.1.62.1.1.7 | not-accessible | The IP Address Translation table used for mapping from IP addresses to physical addresses. The Address Translation tables contain the IP address to 'physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries. While many protocols may be used to populate this table, ARP [10] and Neighbor Discovery [4] are the most likely options. | |
| rcIpv6NetToPhysicalEntry | 1.3.6.1.4.1.2272.1.62.1.1.7.1 | not-accessible | Each entry contains one IP address to `physical' address equivalence. | |
| NUM rcIpv6NetToPhysicalIfIndex | 1.3.6.1.4.1.2272.1.62.1.1.7.1.1 | InterfaceIndex | not-accessible | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IfIndex field in the rcIpv6InterfaceIfIndex. |
| ADR rcIpv6NetToPhysicalNetAddress | 1.3.6.1.4.1.2272.1.62.1.1.7.1.2 | Ipv6Address | not-accessible | The IP Address corresponding to the media-dependent `physical' address. The address type of this object is specified in rcIpv6NetToPhysicalAddressType. Implementors need to be aware that if the size of rcIpv6NetToPhysicalNetAddress exceeds 115 octets then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c or SNMPv3. |
| PHY rcIpv6NetToPhysicalPhysAddress | 1.3.6.1.4.1.2272.1.62.1.1.7.1.3 | PhysAddress | read-write | The media-dependent `physical' address. As the entries in this table are typically not persistent when this object is written the entity SHOULD NOT save the change to non-volatile storage. In the ethernet case it is a MAC address. |
| I32 rcIpv6NetToPhysicalInterface | 1.3.6.1.4.1.2272.1.62.1.1.7.1.4 | Integer32 | read-write | The field represents either a physical port id or the MLT port id. This entry is associated either with a port or with a MLT in a VLAN/Brouter port. If the value is 0 then the interface is CP port. |
| TIM rcIpv6NetToPhysicalLastUpdated | 1.3.6.1.4.1.2272.1.62.1.1.7.1.5 | TimeStamp | read-only | The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value. |
| INT rcIpv6NetToPhysicalType | 1.3.6.1.4.1.2272.1.62.1.1.7.1.6 | INTEGER | read-write | The type of mapping. The 'dynamic(2)' type indicates that the IP address to physical addresses mapping has been dynamically resolved using e.g. IPv4 ARP or the IPv6 Neighbor Discovery protocol. The 'static(3)' type indicates that the mapping has been statically configured. Both of these refer to entries that provide mappings for other entities addresses. The 'local(4)' type indicates that the mapping is provided for an entity's own interface address. As the entries in this table are typically not persistent when this object is written the entity SHOULD NOT save the change to non-volatile storage. |
| INT rcIpv6NetToPhysicalState | 1.3.6.1.4.1.2272.1.62.1.1.7.1.8 | INTEGER | read-only | The Neighbor Unreachability Detection [4] state for the interface when the address mapping in this entry is used. If Neighbor Unreachability Detection is not in use (eg. for IPv4), this object is always unknown(6). REFERENCE RFC2461 |
| ROW rcIpv6NetToPhysicalRowStatus | 1.3.6.1.4.1.2272.1.62.1.1.7.1.9 | RowStatus | read-create | The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on whether other objects in this conceptual row can be modified. A conceptual row can not be made active until the rcIpv6NetToPhysicalPhysAddress object has been set. Note that if the rcIpv6NetToPhysicalType is set to 'invalid' the managed node may delete the entry independent of the state of this object. Only createandGo and Delete operations are supported |
| rcIpv6PrefixListTable | 1.3.6.1.4.1.2272.1.62.1.1.8 | not-accessible | IPv6 Prefix List table | |
| rcIpv6PrefixListEntry | 1.3.6.1.4.1.2272.1.62.1.1.8.1 | not-accessible | An entry of Ipv6 Prefix List Table. | |
| U32 rcIpv6PrefixListId | 1.3.6.1.4.1.2272.1.62.1.1.8.1.1 | Unsigned32 | not-accessible | Id of an IPv6 Prefix List |
| ADR rcIpv6PrefixListPrefix | 1.3.6.1.4.1.2272.1.62.1.1.8.1.2 | Ipv6Address | not-accessible | Is a member of a specific ipv6 prefix list. Adding the prefix to the given ipv6 prefix list |
| U32 rcIpv6PrefixListPrefixMaskLen | 1.3.6.1.4.1.2272.1.62.1.1.8.1.3 | Unsigned32 | not-accessible | Mask length of the ipv6 prefix added to the prefix list |
| U32 rcIpv6PrefixListMaskLenFrom | 1.3.6.1.4.1.2272.1.62.1.1.8.1.4 | Unsigned32 | read-create | Lower bound of mask length of the ipv6 prefix added to the prefix list |
| U32 rcIpv6PrefixListMaskLenUpto | 1.3.6.1.4.1.2272.1.62.1.1.8.1.5 | Unsigned32 | read-create | Higher bound of mask length of the ipv6 prefix added to the prefix list |
| STR rcIpv6PrefixListName | 1.3.6.1.4.1.2272.1.62.1.1.8.1.6 | SnmpAdminString | read-create | Name of the Ipv6 prefix list |
| ROW rcIpv6PrefixListRowStatus | 1.3.6.1.4.1.2272.1.62.1.1.8.1.7 | RowStatus | read-create | Used to create/delete entries in the ipv6 prefix list table |
| rcIpv6ConfDhcpRelayTable | 1.3.6.1.4.1.2272.1.62.1.1.9 | not-accessible | DHCP Relay for Ipv6 configuration table | |
| rcIpv6ConfDhcpRelayEntry | 1.3.6.1.4.1.2272.1.62.1.1.9.1 | not-accessible | Used to configure DHCP on a particular L3 interface. An entry is created automatically when the variable rcIpv6InterfaceDhcpEnabled is set to TRUE. Once created this entry will only be deleted if the rcIpv6ConfDhcpRowStatus is set to 'destroy(6)'. In which case, the rcIpv6InterfaceDhcpEnabled is automatically reset to the FALSE setting. | |
| NUM rcIpv6ConfDhcpIfIndex | 1.3.6.1.4.1.2272.1.62.1.1.9.1.1 | InterfaceIndex | not-accessible | Interface number. The number can represent either a physical or logical(VLAN) interface. |
| U32 rcIpv6ConfDhcpMaxHop | 1.3.6.1.4.1.2272.1.62.1.1.9.1.2 | Unsigned32 | read-create | Used to indicate the maximum number of hops a DHCP packet can take from the source device to the destination device (i.e., DHCP client to DHCP server). |
| T/F rcIpv6ConfDhcpRemoteIdEnabled | 1.3.6.1.4.1.2272.1.62.1.1.9.1.3 | TruthValue | read-create | Used to indicate if remote-id option is enabled. |
| C32 rcIpv6ConfDhcpNumRequests | 1.3.6.1.4.1.2272.1.62.1.1.9.1.4 | Counter32 | read-only | The total number of DHCP requests seen on this interface. |
| C32 rcIpv6ConfDhcpNumReplies | 1.3.6.1.4.1.2272.1.62.1.1.9.1.5 | Counter32 | read-only | The total number of DHCP replies seen on this interface. |
| ROW rcIpv6ConfDhcpRowStatus | 1.3.6.1.4.1.2272.1.62.1.1.9.1.6 | RowStatus | read-create | An entry is created automatically when the variable rcIpv6InterfaceDhcpEnabled is set to TRUE. Once created this entry will only be deleted if the rcIpv6ConfDhcpRowStatus is set to 'destroy(6)'. In which case, the rcIpv6InterfaceDhcpEnabled is automatically reset to the FALSE setting. |
| rcIpv6DhcpForwardTable | 1.3.6.1.4.1.2272.1.62.1.1.10 | not-accessible | DHCP Relay forwarding table. | |
| rcIpv6DhcpForwardEntry | 1.3.6.1.4.1.2272.1.62.1.1.10.1 | not-accessible | An entry used represents a DHCP Relayed message forwarding directive. | |
| ADR rcIpv6DhcpForwardAgentAddr | 1.3.6.1.4.1.2272.1.62.1.1.10.1.1 | Ipv6Address | not-accessible | The IP address configured on an interface (i.e., a locally configured IP address). |
| ADR rcIpv6DhcpForwardServerAddr | 1.3.6.1.4.1.2272.1.62.1.1.10.1.2 | Ipv6Address | not-accessible | The IP address of the DHCP server. If this IP address corresponds to a local interface address, the DHCP packet is multicast out the interface the IP address is assigned to.otherwise,the DHCP packet is sent via unicast to the remote device. |
| T/F rcIpv6DhcpForwardEnabled | 1.3.6.1.4.1.2272.1.62.1.1.10.1.3 | TruthValue | read-create | Used to indicate whether the entry should be used. |
| ROW rcIpv6DhcpForwardRowStatus | 1.3.6.1.4.1.2272.1.62.1.1.10.1.4 | RowStatus | read-create | Row status of this entry. |
| rcIpv6RadiusServTable | 1.3.6.1.4.1.2272.1.62.1.1.11 | not-accessible | The RADIUS table (0 to 10 entries). This table lists the information of the RADIUS server. | |
| rcIpv6RadiusServEntry | 1.3.6.1.4.1.2272.1.62.1.1.11.1 | not-accessible | A RADIUS server table entry. | |
| ADR rcIpv6RadiusServAddress | 1.3.6.1.4.1.2272.1.62.1.1.11.1.1 | Ipv6Address | not-accessible | Server IP address of the RADIUS authentication server referred to in this table entry. |
| INT rcIpv6RadiusServUsedBy | 1.3.6.1.4.1.2272.1.62.1.1.11.1.2 | INTEGER | not-accessible | cli(1): for cli login, igap(2): for igap,snmp(3): for snmp login, eap(4) for EAP PAE Authenticator,web(5) for EDM. |
| U32 rcIpv6RadiusServPriority | 1.3.6.1.4.1.2272.1.62.1.1.11.1.3 | Unsigned32 | read-create | Server priority, used to control which server to choose first to send authentication. |
| U32 rcIpv6RadiusServTimeOut | 1.3.6.1.4.1.2272.1.62.1.1.11.1.4 | Unsigned32 | read-create | The time interval in seconds before the client retransmit the packet. |
| T/F rcIpv6RadiusServEnable | 1.3.6.1.4.1.2272.1.62.1.1.11.1.5 | TruthValue | read-create | Enable or disable this server. |
| U32 rcIpv6RadiusServMaxRetries | 1.3.6.1.4.1.2272.1.62.1.1.11.1.6 | Unsigned32 | read-create | Maximum number of retransmissions. |
| U32 rcIpv6RadiusServUdpPort | 1.3.6.1.4.1.2272.1.62.1.1.11.1.7 | Unsigned32 | read-create | The UDP port the client is using to send requests to this server. |
| STR rcIpv6RadiusServSecretKey | 1.3.6.1.4.1.2272.1.62.1.1.11.1.8 | SnmpAdminString | read-create | The identifier of the RADIUS authentication client. |
| C32 rcIpv6RadiusServAccessRequests | 1.3.6.1.4.1.2272.1.62.1.1.11.1.9 | Counter32 | read-only | The number of RADIUS access-response packets sent to this server. This does not include retransmissions. |
| C32 rcIpv6RadiusServAccessAccepts | 1.3.6.1.4.1.2272.1.62.1.1.11.1.10 | Counter32 | read-only | The number of RADIUS access-accept packets (valid or invalid) received from this server. |
| C32 rcIpv6RadiusServAccessRejects | 1.3.6.1.4.1.2272.1.62.1.1.11.1.11 | Counter32 | read-only | The number of RADIUS access-reject packets (valid or invalid) received from this server. |
| C32 rcIpv6RadiusServBadResponses | 1.3.6.1.4.1.2272.1.62.1.1.11.1.12 | Counter32 | read-only | The number of RADIUS invalid access-response packets received from this server. |
| C32 rcIpv6RadiusServPendingRequests | 1.3.6.1.4.1.2272.1.62.1.1.11.1.13 | Counter32 | read-only | The number of RADIUS access-request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an access-request is sent and decremented due to receipt of an access-accept, access-reject, a timeout or retransmission. |
| C32 rcIpv6RadiusServClientRetries | 1.3.6.1.4.1.2272.1.62.1.1.11.1.14 | Counter32 | read-only | The number of authentication retransmission to this server. |
| T/F rcIpv6RadiusServAcctEnable | 1.3.6.1.4.1.2272.1.62.1.1.11.1.15 | TruthValue | read-create | Enable or disable Radius Accounting on this server. |
| U32 rcIpv6RadiusServAcctUdpPort | 1.3.6.1.4.1.2272.1.62.1.1.11.1.16 | Unsigned32 | read-create | The UDP port the client used to send accounting requests to this server. |
| C32 rcIpv6RadiusServAcctOnRequests | 1.3.6.1.4.1.2272.1.62.1.1.11.1.17 | Counter32 | read-only | The number of RADIUS accounting-on packets sent to this server. This does not include retransmissions. |
| C32 rcIpv6RadiusServAcctOffRequests | 1.3.6.1.4.1.2272.1.62.1.1.11.1.18 | Counter32 | read-only | The number of RADIUS accounting-off packets sent to this server. This does not include retransmissions. |
| C32 rcIpv6RadiusServAcctStartRequests | 1.3.6.1.4.1.2272.1.62.1.1.11.1.19 | Counter32 | read-only | The number of RADIUS accounting-start packets sent to this server. This does not include retransmissions. |
| C32 rcIpv6RadiusServAcctStopRequests | 1.3.6.1.4.1.2272.1.62.1.1.11.1.20 | Counter32 | read-only | The number of RADIUS accounting-stop packets sent to this server. This does not include retransmissions. |
| C32 rcIpv6RadiusServAcctInterimRequests | 1.3.6.1.4.1.2272.1.62.1.1.11.1.21 | Counter32 | read-only | The number of RADIUS accounting-interim packets sent to this server. This does not include retransmissions. |
| C32 rcIpv6RadiusServAcctBadResponses | 1.3.6.1.4.1.2272.1.62.1.1.11.1.22 | Counter32 | read-only | The number of Invalid responses received from this server. |
| C32 rcIpv6RadiusServAcctPendingRequests | 1.3.6.1.4.1.2272.1.62.1.1.11.1.23 | Counter32 | read-only | The number of RADIUS accounting packets that are waiting be sent to this server. This variable is incremented whenever any accounting-request is sent to this server and decremented when an acknowledgement is received or timeout occurs. |
| C32 rcIpv6RadiusServAcctClientRetries | 1.3.6.1.4.1.2272.1.62.1.1.11.1.24 | Counter32 | read-only | The number of RADIUS accounting packets retransmitted to this server. |
| ADR rcIpv6RadiusServNasIpAddress | 1.3.6.1.4.1.2272.1.62.1.1.11.1.25 | Ipv6Address | read-only | RADIUS Client NAS Identifier for this server. |
| STR rcIpv6RadiusServRoundTripTime | 1.3.6.1.4.1.2272.1.62.1.1.11.1.26 | SnmpAdminString | read-only | Time different between the instance when a RADIUS request is sent and the corresponding response is received. |
| C32 rcIpv6RadiusServAccessChallanges | 1.3.6.1.4.1.2272.1.62.1.1.11.1.27 | Counter32 | read-only | The number of RADIUS access-challanges packets sent to this server. This does not include retransmission. |
| ADR rcIpv6RadiusServSourceIpAddr | 1.3.6.1.4.1.2272.1.62.1.1.11.1.28 | Ipv6Address | read-create | source IP address RADIUS packets. |
| ROW rcIpv6RadiusServRowStatus | 1.3.6.1.4.1.2272.1.62.1.1.11.1.29 | RowStatus | read-create | Used to create/delete entries. |
| rcIsis | 1.3.6.1.4.1.2272.1.63 | |||
| rcIsisGlobalGroup | 1.3.6.1.4.1.2272.1.63.1 | |||
| INT rcIsisGlobalAreaAuthType | 1.3.6.1.4.1.2272.1.63.1.1 | INTEGER | read-write | The authentication type for the area |
| I32 rcIsisGlobalAreaKeyId | 1.3.6.1.4.1.2272.1.63.1.2 | Integer32 | read-write | Authentication key-id for the area. This is required if the auth-type is hmac-md5 else it is not required. |
| OCT rcIsisGlobalAreaAuthKey | 1.3.6.1.4.1.2272.1.63.1.3 | OCTET STRING | read-write | Authentication key, this key will be used to authenticate the LSP's received on the area |
| INT rcIsisGlobalDomainAuthType | 1.3.6.1.4.1.2272.1.63.1.4 | INTEGER | read-write | The authentication type for the domain |
| I32 rcIsisGlobalDomainKeyId | 1.3.6.1.4.1.2272.1.63.1.5 | Integer32 | read-write | The authentication key-id for the domain. This is required if the auth-type is hmac-md5 else it is not required. |
| OCT rcIsisGlobalDomainAuthKey | 1.3.6.1.4.1.2272.1.63.1.6 | OCTET STRING | read-write | Authentication key, this key will be used to authenticate the LSP's received on the domain |
| I32 rcIsisGlobalCsnpInt | 1.3.6.1.4.1.2272.1.63.1.7 | Integer32 | read-write | Interval of time, in seconds, between periodic transmission of a complete set of CSNPs on multiaccess networks if this router is the designated router at this level. This object follows the resettingTimer behavior. For ResettingTimer description see the ISIS MIB |
| I32 rcIsisGlobalRxmtLspInt | 1.3.6.1.4.1.2272.1.63.1.8 | Integer32 | read-write | Minimum interval, in seconds, between re-transmission of a LSP at this level. This object follows the resettingTimer behavior. For ResettingTimer description see the ISIS MIB |
| I32 rcIsisGlobalPSNPInterval | 1.3.6.1.4.1.2272.1.63.1.9 | Integer32 | read-write | Minimum interval in seconds between sending Partial Sequence Number PDUs at this level. This object follows the resettingTimer behavior. For ResettingTimer description see the ISIS MIB |
| OCT rcIsisGlobalHostName | 1.3.6.1.4.1.2272.1.63.1.10 | OCTET STRING | read-write | The hostname listed in LSP, or the system name if host name is not configured. |
| I32 rcIsisGlobalSpfDelay | 1.3.6.1.4.1.2272.1.63.1.11 | Integer32 | read-write | ISIS SPF delay in miliseconds |
| I32 rcIsisGlobalControlVlan | 1.3.6.1.4.1.2272.1.63.1.12 | Integer32 | read-write | ISIS control vlan ID |
| IP rcIsisGlobalIpSourceAddress | 1.3.6.1.4.1.2272.1.63.1.13 | InetAddress | read-write | ISIS PLSB IP address. Define an existing router interface for management (ping/traceroute) |
| IPt rcIsisGlobalIpSourceAddressType | 1.3.6.1.4.1.2272.1.63.1.14 | InetAddressType | read-write | The type of address for existing router interface for management (ping/traceroute) |
| rcIsisCircuitTable | 1.3.6.1.4.1.2272.1.63.2 | not-accessible | Table of IS-IS Circuit, this is extension to the isisCircTable defined in ISIS MIB | |
| rcIsisCircuitEntry | 1.3.6.1.4.1.2272.1.63.2.1 | not-accessible | An entry of rcIsisCircuit Table. A Entry in table exists for each ISIS circuit created | |
| I32 rcIsisCircuitIndex | 1.3.6.1.4.1.2272.1.63.2.1.1 | Integer32 | not-accessible | The identifier of this circuit, unique within the Intermediate System. This object follows the index behavior. This is for SNMP Indexing purposes only and need not have any relation to any protocol value. |
| INT rcIsisCircuitType | 1.3.6.1.4.1.2272.1.63.2.1.2 | INTEGER | read-write | ISIS circuit type this is an extention to ISIS circuit table, this was required a standard MIB circuit type does not support passive type |
| INT rcIsisCircuitAuthType | 1.3.6.1.4.1.2272.1.63.2.1.3 | INTEGER | read-write | Authentication type for IIH to be sent/reveived on the circuit/interface |
| INT rcIsisCircuitKeyId | 1.3.6.1.4.1.2272.1.63.2.1.4 | INTEGER | read-write | Authentication key id related to IIH key This can be set only if the auth-type is hmac-md5 |
| OCT rcIsisCircuitAuthKey | 1.3.6.1.4.1.2272.1.63.2.1.5 | OCTET STRING | read-write | Authentication key to be used to authenticate IIH sent/reveived on the circuit/interface |
| IP rcIsisCircuitAddr | 1.3.6.1.4.1.2272.1.63.2.1.6 | IpAddress | read-only | IP address associated with the interface |
| IP rcIsisCircuitMask | 1.3.6.1.4.1.2272.1.63.2.1.7 | IpAddress | read-only | IP mask associated with the interface |
| INT rcIsisCircuitOperState | 1.3.6.1.4.1.2272.1.63.2.1.8 | INTEGER | read-only | This variable tells the operating state of circ |
| I32 rcIsisCircuitNumAdj | 1.3.6.1.4.1.2272.1.63.2.1.9 | Integer32 | read-only | NUmber of adjacencies |
| I32 rcIsisCircuitNumUpAdj | 1.3.6.1.4.1.2272.1.63.2.1.10 | Integer32 | read-only | Number of adjancencies which are UP |
| rcIsisStats | 1.3.6.1.4.1.2272.1.63.3 | |||
| T/F rcIsisStatsClearErrorCounters | 1.3.6.1.4.1.2272.1.63.3.1 | TruthValue | read-write | Clear ISIS global and interface error counters. |
| T/F rcIsisStatsClearPacketCounters | 1.3.6.1.4.1.2272.1.63.3.2 | TruthValue | read-write | Clear IS-IS control packets sent and received at each level on all the interface/circuits. |
| rcIsisPlsbTable | 1.3.6.1.4.1.2272.1.63.4 | not-accessible | Table of PLSB under IS-IS | |
| rcIsisPlsbEntry | 1.3.6.1.4.1.2272.1.63.4.1 | not-accessible | An entry of rcIsisPlsb Table. A Entry in table exists for each plsb instance created | |
| I32 rcIsisPlsbId | 1.3.6.1.4.1.2272.1.63.4.1.1 | Integer32 | not-accessible | PLSB instance ID |
| ROW rcIsisPlsbRowStatus | 1.3.6.1.4.1.2272.1.63.4.1.2 | RowStatus | read-create | The state of the rcIsisPlsbEntry. |
| ISI rcIsisPlsbNodeNickName | 1.3.6.1.4.1.2272.1.63.4.1.3 | IsisPlsbNodeNickName | read-create | PLSB node's nickname is used to calculate ISID multicast mac address. |
| OCT rcIsisPlsbVlans | 1.3.6.1.4.1.2272.1.63.4.1.4 | OCTET STRING | read-create | PLSB ISIS vlans for a PLSB instance. |
| ENA rcIsisPlsbLsdbTrap | 1.3.6.1.4.1.2272.1.63.4.1.5 | EnableValue | read-create | isis PLSB lsdb update trap enable on this plsb instance |
| ENA rcIsisPlsbState | 1.3.6.1.4.1.2272.1.63.4.1.6 | EnableValue | read-create | enable/disable PLSB. |
| ENA rcIsisPlsbIpShortcut | 1.3.6.1.4.1.2272.1.63.4.1.7 | EnableValue | read-create | ISIS PLSB IP shortcut enabled |
| I32 rcIsisPlsbPrimaryVlan | 1.3.6.1.4.1.2272.1.63.4.1.8 | Integer32 | read-create | Primary Vlan Id for this plsb instance. |
| INT rcIsisPlsbSmltSplitBEB | 1.3.6.1.4.1.2272.1.63.4.1.9 | INTEGER | read-only | ISIS PLSB SMLT split BEB for this plsb instance. |
| MAC rcIsisPlsbSmltBmac | 1.3.6.1.4.1.2272.1.63.4.1.10 | MacAddress | read-create | ISIS PLSB SMLT virtual MAC for this plsb instance. |
| ISI rcIsisPlsbSmltPeerSysId | 1.3.6.1.4.1.2272.1.63.4.1.11 | IsisSystemID | read-create | ISIS PLSB SMLT Peer's system-id for this plsb instance. |
| rcIsisCircuitPlsbTable | 1.3.6.1.4.1.2272.1.63.5 | not-accessible | Table of IS-IS Circuit PLSB instance | |
| rcIsisCircuitPlsbEntry | 1.3.6.1.4.1.2272.1.63.5.1 | not-accessible | An entry of rcIsisCircuitPlsb Table. A Entry in table exists for each PLSB instance under a ISIS circuit created | |
| I32 rcIsisCircuitPlsbIndex | 1.3.6.1.4.1.2272.1.63.5.1.1 | Integer32 | not-accessible | The identifier of this circuit, unique within the Intermediate System. This object follows the index behavior. This is for SNMP Indexing purposes only and need not have any relation to any protocol value. |
| I32 rcIsisCircuitPlsbId | 1.3.6.1.4.1.2272.1.63.5.1.2 | Integer32 | not-accessible | PLSB instance ID |
| ROW rcIsisCircuitPlsbRowStatus | 1.3.6.1.4.1.2272.1.63.5.1.3 | RowStatus | read-create | The state of the rcIsisCircuitPlsbEntry. |
| ENA rcIsisCircuitPlsbState | 1.3.6.1.4.1.2272.1.63.5.1.4 | EnableValue | read-create | PLSB functionality enable on this Plsb instance at this port |
| INT rcIsisCircuitPlsbType | 1.3.6.1.4.1.2272.1.63.5.1.5 | INTEGER | read-create | ISIS circuit type this is an extention to ISIS circuit table, this was required a standard MIB circuit type does not support passive type |
| ISI rcIsisCircuitPlsbL1Metric | 1.3.6.1.4.1.2272.1.63.5.1.6 | IsisDefaultL1Metric | read-create | The metric value of this circuit for this level. |
| ISI rcIsisCircuitPlsbWideL1Metric | 1.3.6.1.4.1.2272.1.63.5.1.7 | IsisWideL1Metric | read-create | The metric value of this circuit for this level. |
| rcIsisPlsbUnicastFibTable | 1.3.6.1.4.1.2272.1.63.6 | not-accessible | Table of IS-IS PLSB Unicast FIB | |
| rcIsisPlsbUnicastFibEntry | 1.3.6.1.4.1.2272.1.63.6.1 | not-accessible | An entry of rcIsisPlsbUnicastFib Table. A Entry in table exists for each PLSB unicast forwarding entry generated by ISIS SPF computation | |
| MAC rcIsisPlsbUnicastFibDestinationMacAddr | 1.3.6.1.4.1.2272.1.63.6.1.1 | MacAddress | not-accessible | Destination Mac Address of the unicast FIB entry |
| I32 rcIsisPlsbUnicastFibVlan | 1.3.6.1.4.1.2272.1.63.6.1.2 | Integer32 | not-accessible | Vlan of the unicast FIB entry |
| OCT rcIsisPlsbUnicastFibSysId | 1.3.6.1.4.1.2272.1.63.6.1.3 | OCTET STRING | not-accessible | System ID of the node where unicast FIB entry come from |
| NUM rcIsisPlsbUnicastFibOutgoingPort | 1.3.6.1.4.1.2272.1.63.6.1.4 | InterfaceIndex | read-only | Outgoing port of the unicast Fib entry. |
| rcIsisPlsbMulticastFibTable | 1.3.6.1.4.1.2272.1.63.7 | not-accessible | Table of IS-IS PLSB Multicast FIB | |
| rcIsisPlsbMulticastFibEntry | 1.3.6.1.4.1.2272.1.63.7.1 | not-accessible | An entry of rcIsisPlsbmulticastFib Table. A Entry in table exists for each PLSB Multicast forwarding entry generated by ISIS SPF computation | |
| MAC rcIsisPlsbMulticastFibMcastDestMacAddr | 1.3.6.1.4.1.2272.1.63.7.1.1 | MacAddress | not-accessible | Multicast destination Mac Address of the multicast FIB entry |
| I32 rcIsisPlsbMulticastFibVlan | 1.3.6.1.4.1.2272.1.63.7.1.2 | Integer32 | not-accessible | Vlan of the multicast FIB entry |
| OCT rcIsisPlsbMulticastFibSysId | 1.3.6.1.4.1.2272.1.63.7.1.3 | OCTET STRING | not-accessible | System ID of the node where multicast FIB entry come from |
| I32 rcIsisPlsbMulticastFibIsid | 1.3.6.1.4.1.2272.1.63.7.1.4 | Integer32 | read-only | Isid id of the multicast FIB entry |
| STR rcIsisPlsbMulticastFibOutgoingPorts | 1.3.6.1.4.1.2272.1.63.7.1.5 | DisplayString | read-only | Nni port of the multicast Fib entry. |
| rcIsisPlsbIsidTable | 1.3.6.1.4.1.2272.1.63.8 | not-accessible | Table of IS-IS PLSB ISID | |
| rcIsisPlsbIsidEntry | 1.3.6.1.4.1.2272.1.63.8.1 | not-accessible | An entry of rcIsisPlsbIsid Table. A Entry in table exists for each PLSB i-sid configed or discovered by IS-IS | |
| I32 rcIsisPlsbIsidSourceName | 1.3.6.1.4.1.2272.1.63.8.1.1 | Integer32 | not-accessible | nick name of node where this i-sid got configed or discovered |
| I32 rcIsisPlsbIsidId | 1.3.6.1.4.1.2272.1.63.8.1.2 | Integer32 | not-accessible | IS-IS PLSB Isid id |
| OCT rcIsisPlsbIsidSysId | 1.3.6.1.4.1.2272.1.63.8.1.3 | OCTET STRING | not-accessible | System ID of the node where multicast FIB entry come from |
| INT rcIsisPlsbIsidType | 1.3.6.1.4.1.2272.1.63.8.1.4 | INTEGER | read-only | PLSB i-sid type |
| rcIsisTrap | 1.3.6.1.4.1.2272.1.63.9 | |||
| STR rcIsisLocalLspId | 1.3.6.1.4.1.2272.1.63.9.1 | DisplayString | read-only | The 8 byte Local LSP ID, consisting of the SystemID, Circuit ID, and Fragment Number. |
| ISI rcIsisLocall1Metric | 1.3.6.1.4.1.2272.1.63.9.2 | IsisDefaultL1Metric | read-only | l1-metric for ISIS interface on local Node. |
| STR rcIsisNgbLspId | 1.3.6.1.4.1.2272.1.63.9.3 | DisplayString | read-only | The 8 byte neighbor LSP ID, consisting of the SystemID, Circuit ID, and Fragment Number. |
| ISI rcIsisNgbl1Metric | 1.3.6.1.4.1.2272.1.63.9.4 | IsisDefaultL1Metric | read-only | l1-metric for ISIS interface on neighbor Node. |
| INT rcIsisPlsbTrapType | 1.3.6.1.4.1.2272.1.63.9.5 | INTEGER | read-only | |
| STR rcIsisLocalSysId | 1.3.6.1.4.1.2272.1.63.9.6 | DisplayString | read-only | ISIS local node system-id. |
| I32 rcIsisLocalInterface | 1.3.6.1.4.1.2272.1.63.9.7 | Integer32 | read-only | ISIS local interface index. |
| INT rcIsisTrapIndicator | 1.3.6.1.4.1.2272.1.63.9.8 | INTEGER | read-only | indicates that an alarm has been Raised, or an alarm has been cleared. |
| STR rcIsisLocalNickname | 1.3.6.1.4.1.2272.1.63.9.9 | DisplayString | read-only | ISIS local node nick-name. |
| STR rcIsisNgbNickname | 1.3.6.1.4.1.2272.1.63.9.10 | DisplayString | read-only | ISIS neighbor node nick-name. |
| STR rcIsisNgbSysId | 1.3.6.1.4.1.2272.1.63.9.11 | DisplayString | read-only | ISIS neighbor node system-id. |
| ISI rcIsisLocalPrimaryBvid | 1.3.6.1.4.1.2272.1.63.9.12 | IsisPlsbBvid | read-only | ISIS local primary B-VID. |
| ISI rcIsisLocalPrimaryTieBrkAlg | 1.3.6.1.4.1.2272.1.63.9.13 | IsisPlsbBvidTieBrkAlg | read-only | The tie breaking algorithm applied to local primary B-VID. |
| ISI rcIsisLocalSecondaryBvid | 1.3.6.1.4.1.2272.1.63.9.14 | IsisPlsbBvid | read-only | ISIS local secondary B-VID. |
| ISI rcIsisLocalSecondaryTieBrkAlg | 1.3.6.1.4.1.2272.1.63.9.15 | IsisPlsbBvidTieBrkAlg | read-only | The tie breaking algorithm applied to local seconday B-VID. |
| ISI rcIsisNgbPrimaryBvid | 1.3.6.1.4.1.2272.1.63.9.16 | IsisPlsbBvid | read-only | ISIS neighbor primary B-VID. |
| ISI rcIsisNgbPrimaryTieBrkAlg | 1.3.6.1.4.1.2272.1.63.9.17 | IsisPlsbBvidTieBrkAlg | read-only | The neighbor tie breaking algorithm applied to primary B-VID. |
| ISI rcIsisNgbSecondaryBvid | 1.3.6.1.4.1.2272.1.63.9.18 | IsisPlsbBvid | read-only | ISIS neighbor secondary B-VID. |
| ISI rcIsisNgbSecondaryTieBrkAlg | 1.3.6.1.4.1.2272.1.63.9.19 | IsisPlsbBvidTieBrkAlg | read-only | The neighbor tie breaking algorithm applied to secondary B-VID. |
| MAC rcIsisLocalVirtualBmac | 1.3.6.1.4.1.2272.1.63.9.20 | MacAddress | read-only | The SMLT Virtual BMAC configured in the local IST switch. |
| MAC rcIsisPeerVirtualBmac | 1.3.6.1.4.1.2272.1.63.9.21 | MacAddress | read-only | The SMLT Virtual BMAC configured in the IST Peer. |
| STR rcIsisSysId | 1.3.6.1.4.1.2272.1.63.9.22 | DisplayString | read-only | The isis system id configured in the local switch or IST peer. |
| STR rcIsisSmltPeerSysId | 1.3.6.1.4.1.2272.1.63.9.23 | DisplayString | read-only | The SMLT Peer system-id configured in the local switch or IST Peer. |
| INT rcIsisAdjState | 1.3.6.1.4.1.2272.1.63.9.24 | INTEGER | read-only | indicate different ISIS adjacency states. |
| INT rcIsisDuplicateNnameCounter | 1.3.6.1.4.1.2272.1.63.9.25 | INTEGER | read-only | indicate how many nodes in the network share the nick-name. |
| INT rcIsisLocalBvidCounter | 1.3.6.1.4.1.2272.1.63.9.26 | INTEGER | read-only | indicate how many b-vid configured on local nodes. |
| INT rcIsisNgbBvidCounter | 1.3.6.1.4.1.2272.1.63.9.27 | INTEGER | read-only | indicate how many b-vid configured on a neighbor nodes. |
| INT rcIsisLocalSmltSplitBeb | 1.3.6.1.4.1.2272.1.63.9.28 | INTEGER | read-only | The SMLT Split-BEB configured in the local IST switch. |
| INT rcIsisPeerSmltSplitBeb | 1.3.6.1.4.1.2272.1.63.9.29 | INTEGER | read-only | The SMLT Split-BEB configured in the IST Peer switch. |
| OCT rcIsisLocalHostName | 1.3.6.1.4.1.2272.1.63.9.30 | OCTET STRING | read-only | ISIS local host name. |
| OCT rcIsisNgbHostName | 1.3.6.1.4.1.2272.1.63.9.31 | OCTET STRING | read-only | ISIS neighbor host name. |
| I32 rcIsisPrevInterface | 1.3.6.1.4.1.2272.1.63.9.32 | Integer32 | read-only | ISIS local interface index for previously found adj. |
| rcIsisAdjTable | 1.3.6.1.4.1.2272.1.63.10 | not-accessible | Table of IS-IS Adjacency, this is extension to the isisISAdjTable defined in ISIS MIB | |
| rcIsisAdjEntry | 1.3.6.1.4.1.2272.1.63.10.1 | not-accessible | An entry of rcIsisAdj Table. A Entry in table exists for each ISIS adjacency | |
| I32 rcIsisAdjCircIndex | 1.3.6.1.4.1.2272.1.63.10.1.1 | Integer32 | not-accessible | The identifier of this circuit, unique within the Intermediate System. This object follows the index behavior. This is for SNMP Indexing purposes only and need not have any relation to any protocol value. |
| U32 rcIsisAdjIndex | 1.3.6.1.4.1.2272.1.63.10.1.2 | Unsigned32 | not-accessible | A unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is automatically assigned by the system when the adjacency is created. |
| OCT rcIsisAdjHostName | 1.3.6.1.4.1.2272.1.63.10.1.3 | OCTET STRING | read-only | The hostname listed in LSP, or the system name if host name is not configured. |
| NUM rcIsisAdjIfIndex | 1.3.6.1.4.1.2272.1.63.10.1.4 | InterfaceIndex | read-only | The value of ifIndex for the interface to which this circuit corresponds. |
| rcIsisLSPTable | 1.3.6.1.4.1.2272.1.63.11 | not-accessible | Table of IS-IS LSP, this is extension to the isisLSPSummaryTable defined in ISIS MIB | |
| rcIsisLSPEntry | 1.3.6.1.4.1.2272.1.63.11.1 | not-accessible | An entry of rcIsisLSP Table. A Entry in table exists for each ISIS LSP | |
| INT rcIsisLSPLevel | 1.3.6.1.4.1.2272.1.63.11.1.1 | INTEGER | not-accessible | At which level does this LSP appear? |
| OCT rcIsisLSPID | 1.3.6.1.4.1.2272.1.63.11.1.2 | OCTET STRING | not-accessible | The 8 byte LSP ID, consisting of the SystemID, Circuit ID, and Fragment Number. |
| U32 rcIsisLSPSeq | 1.3.6.1.4.1.2272.1.63.11.1.3 | Unsigned32 | read-only | The sequence number for this LSP. |
| OCT rcIsisLSPHostName | 1.3.6.1.4.1.2272.1.63.11.1.4 | OCTET STRING | read-only | The hostname listed in LSP, or the system name if host name is not configured. |
| I32 rcIsisLSPNickName | 1.3.6.1.4.1.2272.1.63.11.1.5 | Integer32 | read-only | PLSB node's nickname |
| U32 rcIsisLSPLifetimeRemain | 1.3.6.1.4.1.2272.1.63.11.1.6 | Unsigned32 | read-only | The remaining lifetime in seconds for this LSP. |
| rcIsisPlsbIpUnicastFibTable | 1.3.6.1.4.1.2272.1.63.12 | not-accessible | Table of IS-IS PLSB IP Unicast FIB | |
| rcIsisPlsbIpUnicastFibEntry | 1.3.6.1.4.1.2272.1.63.12.1 | not-accessible | An entry of rcIsisPlsbIpUnicastFib Table. A Entry in table exists for each PLSB IP unicast forwarding entry. | |
| I32 rcIsisPlsbIpUnicastFibVrfId | 1.3.6.1.4.1.2272.1.63.12.1.1 | Integer32 | not-accessible | VRF ID of the IP unicast FIB entry, 0 indicates NRE. |
| IPt rcIsisPlsbIpUnicastFibDestinationIpAddrType | 1.3.6.1.4.1.2272.1.63.12.1.2 | InetAddressType | not-accessible | The address type of destination IP Address. |
| IP rcIsisPlsbIpUnicastFibDestinationIpAddr | 1.3.6.1.4.1.2272.1.63.12.1.3 | InetAddress | not-accessible | Destination IP Address of the IP unicast FIB entry. Support ipv4 size(4) and ipv6 size(16) |
| ADR rcIsisPlsbIpUnicastFibDestinationMask | 1.3.6.1.4.1.2272.1.63.12.1.4 | InetAddressPrefixLength | not-accessible | Destination IP mask of the IP unicast FIB entry |
| MAC rcIsisPlsbIpUnicastFibNextHopBmac | 1.3.6.1.4.1.2272.1.63.12.1.5 | MacAddress | not-accessible | the nexthop BMAC of the IP unicast FIB entry |
| I32 rcIsisPlsbIpUnicastFibVlan | 1.3.6.1.4.1.2272.1.63.12.1.6 | Integer32 | not-accessible | Vlan of the IP unicast FIB entry |
| I32 rcIsisPlsbIpUnicastFibIsid | 1.3.6.1.4.1.2272.1.63.12.1.7 | Integer32 | read-only | ISID of the IP unicast FIB entry |
| STR rcIsisPlsbIpUnicastFibNextHopName | 1.3.6.1.4.1.2272.1.63.12.1.8 | DisplayString | read-only | the nexthop hostname of the IP unicast FIB entry |
| NUM rcIsisPlsbIpUnicastFibOutgoingPort | 1.3.6.1.4.1.2272.1.63.12.1.9 | InterfaceIndex | read-only | Outgoing port of the IP unicast Fib entry. |
| I32 rcIsisPlsbIpUnicastFibPrefixCost | 1.3.6.1.4.1.2272.1.63.12.1.10 | Integer32 | read-only | prefix cost of the IP unicast FIB entry |
| C64 rcIsisPlsbIpUnicastFibSpbmCost | 1.3.6.1.4.1.2272.1.63.12.1.11 | Counter64 | read-only | bmac cost of the IP unicast FIB entry |
| rcIsisPlsbUcastFibTable | 1.3.6.1.4.1.2272.1.63.13 | not-accessible | Table of IS-IS PLSB Unicast FIB | |
| rcIsisPlsbUcastFibEntry | 1.3.6.1.4.1.2272.1.63.13.1 | not-accessible | An entry of rcIsisPlsbUcastFib Table. A Entry in table exists for each PLSB unicast forwarding entry generated by ISIS SPF computation | |
| OCT rcIsisPlsbUcastFibSysId | 1.3.6.1.4.1.2272.1.63.13.1.1 | OCTET STRING | not-accessible | System ID of the node where unicast FIB entry come from |
| I32 rcIsisPlsbUcastFibVlan | 1.3.6.1.4.1.2272.1.63.13.1.2 | Integer32 | not-accessible | Vlan of the unicast FIB entry |
| MAC rcIsisPlsbUcastFibDestinationMacAddr | 1.3.6.1.4.1.2272.1.63.13.1.3 | MacAddress | not-accessible | Destination Mac Address of the unicast FIB entry |
| NUM rcIsisPlsbUcastFibOutgoingPort | 1.3.6.1.4.1.2272.1.63.13.1.4 | InterfaceIndex | read-only | Outgoing port of the unicast Fib entry. |
| OCT rcIsisPlsbUcastFibHostName | 1.3.6.1.4.1.2272.1.63.13.1.5 | OCTET STRING | read-only | Host name of the node where unicast FIB entry come from |
| C64 rcIsisPlsbUcastFibCost | 1.3.6.1.4.1.2272.1.63.13.1.6 | Counter64 | read-only | unicast FIB cost |
| rcIsisPlsbMcastFibTable | 1.3.6.1.4.1.2272.1.63.14 | not-accessible | Table of IS-IS PLSB Multicast FIB | |
| rcIsisPlsbMcastFibEntry | 1.3.6.1.4.1.2272.1.63.14.1 | not-accessible | An entry of rcIsisPlsbMcastFib Table. A Entry in table exists for each PLSB Multicast forwarding entry generated by ISIS SPF computation | |
| OCT rcIsisPlsbMcastFibSysId | 1.3.6.1.4.1.2272.1.63.14.1.1 | OCTET STRING | not-accessible | System ID of the node where multicast FIB entry come from |
| I32 rcIsisPlsbMcastFibVlan | 1.3.6.1.4.1.2272.1.63.14.1.2 | Integer32 | not-accessible | Vlan of the multicast FIB entry |
| MAC rcIsisPlsbMcastFibMcastDestMacAddr | 1.3.6.1.4.1.2272.1.63.14.1.3 | MacAddress | not-accessible | Multicast destination Mac Address of the multicast FIB entry |
| I32 rcIsisPlsbMcastFibIsid | 1.3.6.1.4.1.2272.1.63.14.1.4 | Integer32 | read-only | Isid id of the multicast FIB entry |
| I32 rcIsisPlsbMcastFibNickName | 1.3.6.1.4.1.2272.1.63.14.1.5 | Integer32 | read-only | nick name of node where this i-sid got configured or discovered |
| INT rcIsisPlsbMcastFibType | 1.3.6.1.4.1.2272.1.63.14.1.6 | INTEGER | read-only | PLSB i-sid type |
| STR rcIsisPlsbMcastFibOutgoingPorts | 1.3.6.1.4.1.2272.1.63.14.1.7 | DisplayString | read-only | Nni port of the multicast Fib entry. |
| OCT rcIsisPlsbMcastFibHostName | 1.3.6.1.4.1.2272.1.63.14.1.8 | OCTET STRING | read-only | Host name of the node where multicast FIB entry come from |
| rcIsisPlsbNodeTable | 1.3.6.1.4.1.2272.1.63.15 | not-accessible | Table of IS-IS PLSB Node | |
| rcIsisPlsbNodeEntry | 1.3.6.1.4.1.2272.1.63.15.1 | not-accessible | An entry of rcIsisPlsbNode Table. A Entry in table exists for each node running PLSB ISIS in the setup. | |
| OCT rcIsisPlsbNodeSysId | 1.3.6.1.4.1.2272.1.63.15.1.1 | OCTET STRING | not-accessible | System ID of the PLSB node entry |
| OCT rcIsisPlsbNodePrimaryParentSysId | 1.3.6.1.4.1.2272.1.63.15.1.2 | OCTET STRING | read-only | System ID of parent node of the PLSB node entry for primary bvlan |
| I32 rcIsisPlsbNodePrimaryBvlan | 1.3.6.1.4.1.2272.1.63.15.1.3 | Integer32 | read-only | spbm primary b-vlan |
| OCT rcIsisPlsbNodeSecondaryParentSysId | 1.3.6.1.4.1.2272.1.63.15.1.4 | OCTET STRING | read-only | System ID of parent node of the PLSB node entry for secondary bvlan |
| I32 rcIsisPlsbNodeSecondaryBvlan | 1.3.6.1.4.1.2272.1.63.15.1.5 | Integer32 | read-only | spbm secondary b-vlan |
| rcIsisSpbmPortDropStatsTable | 1.3.6.1.4.1.2272.1.63.16 | not-accessible | Table of IS-IS SPBM port drop-stats by port index and SPBM b-vlan | |
| rcIsisSpbmPortDropStatsEntry | 1.3.6.1.4.1.2272.1.63.16.1 | not-accessible | SPBM port based frame drop counters. | |
| NUM rcIsisSpbmPortDropStatsPortIndex | 1.3.6.1.4.1.2272.1.63.16.1.1 | InterfaceIndex | not-accessible | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| I32 rcIsisSpbmPortDropStatsVlanId | 1.3.6.1.4.1.2272.1.63.16.1.2 | Integer32 | not-accessible | A value that uniquely identifies the SPBM Virtual LAN associated with this entry. |
| INT rcIsisSpbmPortDropStatsVlanType | 1.3.6.1.4.1.2272.1.63.16.1.3 | INTEGER | read-only | Indicates the type of SPBM bvlan |
| C64 rcIsisSpbmPortDropStatsUnknownUcastSrcAddr | 1.3.6.1.4.1.2272.1.63.16.1.4 | Counter64 | read-only | The total number of SPBM unknown unicast SA packets dropped on SPBM bvlan. |
| C64 rcIsisSpbmPortDropStatsRpfcUcastSrcAddr | 1.3.6.1.4.1.2272.1.63.16.1.5 | Counter64 | read-only | The total number of SPBM reverse path forwarding check (RPFC) unicast SA packets dropped on SPBM bvlan. |
| C64 rcIsisSpbmPortDropStatsUnknownUcastDestAddr | 1.3.6.1.4.1.2272.1.63.16.1.6 | Counter64 | read-only | The total number of SPBM unknown unicast DA packets dropped on SPBM bvlan. |
| C64 rcIsisSpbmPortDropStatsUnknownMcastDestAddr | 1.3.6.1.4.1.2272.1.63.16.1.7 | Counter64 | read-only | The total number of SPBM unknown multicast DA packets dropped on SPBM bvlan. |
| C64 rcIsisSpbmPortDropStatsRpfcMcastSrcAddr | 1.3.6.1.4.1.2272.1.63.16.1.8 | Counter64 | read-only | The total number of SPBM reverse path forwarding check (RPFC) multicast SA packets dropped on SPBM bvlan. |
| MAC rcIsisSpbmPortDropStatsLastDropMac | 1.3.6.1.4.1.2272.1.63.16.1.9 | MacAddress | read-only | The DA or SA last dropped on SPBM bvlan. |
| T/F rcIsisSpbmPortDropStatsIsMacDestAddr | 1.3.6.1.4.1.2272.1.63.16.1.10 | TruthValue | read-only | The last dropped mac on SPBM bvlan is DA or not. |
| OCT rcIsisSpbmPortDropStatsLastDropMacHostName | 1.3.6.1.4.1.2272.1.63.16.1.11 | OCTET STRING | read-only | The host name of the nodes where last dropped SA or DA on SPBM bvlan belongs |
| rcSlpp | 1.3.6.1.4.1.2272.1.64 | |||
| rcSlppMib | 1.3.6.1.4.1.2272.1.64.1 | |||
| rcSlppNotifications | 1.3.6.1.4.1.2272.1.64.1.0 | |||
| NTF rcnSlppPortDownEvent | 1.3.6.1.4.1.2272.1.64.1.0.1 | A port down event that has occurred due to SLPP. The user is notified of the expected Vlan ID along with the Vlan ID and source MAC address of the packet coming in on the port identified. The first two objects can be used to lookup instance info for port id and vlan id. | ||
| NTF rcnSlppPortDownEventNew | 1.3.6.1.4.1.2272.1.64.1.0.2 | A port down event that has occurred due to SLPP. The trap includes the port and its Vlan which receives the packet, and along with the Vlan ID and source MAC address of the packet coming in on the port identified. | ||
| rcSlppObjects | 1.3.6.1.4.1.2272.1.64.1.1 | |||
| rcSlppScalars | 1.3.6.1.4.1.2272.1.64.1.1.1 | |||
| T/F rcSlppGlobalEnable | 1.3.6.1.4.1.2272.1.64.1.1.1.1 | TruthValue | read-write | Global enable/disable for the simple loop prevention protocol. |
| INT rcSlppTransmissionInterval | 1.3.6.1.4.1.2272.1.64.1.1.1.2 | INTEGER | read-write | The interval (in seconds) for which loop detection occurs. |
| I32 rcSlppEtherType | 1.3.6.1.4.1.2272.1.64.1.1.1.3 | Integer32 | read-write | SLPP Protocol Identification. The value is normally in Hex. |
| rcSlppVlanTable | 1.3.6.1.4.1.2272.1.64.1.1.2 | not-accessible | Table of VLANs for which simple loop detection occur on. | |
| rcSlppVlanEntry | 1.3.6.1.4.1.2272.1.64.1.1.2.1 | not-accessible | SLPP VLAN entry. | |
| INT rcSlppVlanVlanId | 1.3.6.1.4.1.2272.1.64.1.1.2.1.1 | INTEGER | not-accessible | Vlan id for which simple loop detection occurs on. |
| T/F rcSlppVlanSlppEnable | 1.3.6.1.4.1.2272.1.64.1.1.2.1.2 | TruthValue | read-write | Flag to indicate whether the VLAN entry is active or not for SLPP. |
| ROW rcSlppVlanRowStatus | 1.3.6.1.4.1.2272.1.64.1.1.2.1.3 | RowStatus | read-write | Used to create/delete entries. |
| rcSlppPortTable | 1.3.6.1.4.1.2272.1.64.1.1.3 | not-accessible | Table of ports for which simple loop detection occurs on. | |
| rcSlppPortEntry | 1.3.6.1.4.1.2272.1.64.1.1.3.1 | not-accessible | SLPP Port entry. | |
| NUM rcSlppPortIfIndex | 1.3.6.1.4.1.2272.1.64.1.1.3.1.1 | InterfaceIndex | not-accessible | Port on which simple loop detection occurs on. |
| I32 rcSlppPortPktRxThreshold | 1.3.6.1.4.1.2272.1.64.1.1.3.1.2 | Integer32 | read-write | Once the number of SLPP packets received on this port reaches this threshold action will be taken.Normally, the port will be shutdown. |
| T/F rcSlppPortSlppEnable | 1.3.6.1.4.1.2272.1.64.1.1.3.1.3 | TruthValue | read-write | Flag to indicate whether the port entry is active or not for SLPP. |
| I32 rcSlppPortIncomingVlanId | 1.3.6.1.4.1.2272.1.64.1.1.3.1.5 | Integer32 | read-only | Vlan id of the classified packet on the port brought down by SLPP. |
| INT rcSlppPortSrcNodeType | 1.3.6.1.4.1.2272.1.64.1.1.3.1.6 | INTEGER | read-only | The src node type of the received slpp Pkt. |
| rcSlppNotificationObjects | 1.3.6.1.4.1.2272.1.64.1.2 | |||
| INT rcSlppIncomingVlanId | 1.3.6.1.4.1.2272.1.64.1.2.1 | INTEGER | accessible-for-notify | Vlan id of the classified packet on the port brought down by SLPP. |
| MAC rcSlppSrcMacAddress | 1.3.6.1.4.1.2272.1.64.1.2.2 | MacAddress | accessible-for-notify | Source MAC address in the classified packet on the port brought down by SLPP. |
| NUM rcSlppRxPortIndex | 1.3.6.1.4.1.2272.1.64.1.2.3 | InterfaceIndex | accessible-for-notify | Port on which the SLPP packet is received. |
| INT rcSlppRxVlanId | 1.3.6.1.4.1.2272.1.64.1.2.4 | INTEGER | accessible-for-notify | Vlan on which the SLPP packet is received. |
| rcTacacs | 1.3.6.1.4.1.2272.1.65 | |||
| rcTacacsGlobal | 1.3.6.1.4.1.2272.1.65.1 | |||
| T/F rcTacacsGlobalEnable | 1.3.6.1.4.1.2272.1.65.1.1 | TruthValue | read-write | Enable/disable this feature. |
| OCT rcTacacsGlobalLastUserName | 1.3.6.1.4.1.2272.1.65.1.2 | OCTET STRING | read-only | The last user for which authentication was attempted using TACACS+. |
| IPt rcTacacsGlobalLastAddressType | 1.3.6.1.4.1.2272.1.65.1.3 | InetAddressType | read-only | The type of address for the TACACS+ server that was most recently accessed |
| IP rcTacacsGlobalLastAddress | 1.3.6.1.4.1.2272.1.65.1.4 | InetAddress | read-only | The address of the TACACS+ server that was most recently accessed |
| BIT rcTacacsAccounting | 1.3.6.1.4.1.2272.1.65.1.5 | Bits | read-write | Determines which application will be accounted by tacacs+. |
| BIT rcTacacsAuthentication | 1.3.6.1.4.1.2272.1.65.1.6 | Bits | read-write | Determines which application will be authenticated by tacacs+. |
| rcTacacsServerTable | 1.3.6.1.4.1.2272.1.65.2 | not-accessible | The (conceptual) table listing the TACACS+ servers with which the client shares a secret. | |
| rcTacacsServerEntry | 1.3.6.1.4.1.2272.1.65.2.1 | not-accessible | An entry (conceptual row) representing a TACACS+ server with which the client shares a secret. | |
| IPt rcTacacsServerAddressType | 1.3.6.1.4.1.2272.1.65.2.1.1 | InetAddressType | not-accessible | Specifies the type of IP address used on the Tacacs+ server. |
| IP rcTacacsServerAddress | 1.3.6.1.4.1.2272.1.65.2.1.2 | InetAddress | not-accessible | The IP address of the TACACS+ server referred to in this table entry. |
| INE rcTacacsServerPortNumber | 1.3.6.1.4.1.2272.1.65.2.1.3 | InetPortNumber | read-create | The TCP port on which the client establishes a connection to the server. A value of 0 indicates that the system specified default value is used. |
| INT rcTacacsServerConnectionType | 1.3.6.1.4.1.2272.1.65.2.1.4 | INTEGER | read-create | Specifies TCP connection type between device and TACACS+ server. Either a single open connection between a device and server (SingleConnection), or open/close connection per communication session (PerSessionConnection). |
| INT rcTacacsServerConnectionStatus | 1.3.6.1.4.1.2272.1.65.2.1.5 | INTEGER | read-only | Specifies status TCP connection type between device and TACACS+ server. |
| I32 rcTacacsServerTimeout | 1.3.6.1.4.1.2272.1.65.2.1.6 | Integer32 | read-create | The maximum time (in seconds) to wait for this TACACS+ server to reply. |
| OCT rcTacacsServerKey | 1.3.6.1.4.1.2272.1.65.2.1.7 | OCTET STRING | read-create | Secret key to be shared with this TACACS+ server. If the key length is zero that indicates no encryption is being used. |
| T/F rcTacacsServerSourceIpInterfaceEnabled | 1.3.6.1.4.1.2272.1.65.2.1.8 | TruthValue | read-create | Specifies whether source address specification is enabled. |
| IPt rcTacacsServerSourceIpInterfaceType | 1.3.6.1.4.1.2272.1.65.2.1.9 | InetAddressType | read-create | Specifies the type of IP address used on the interface that connects to the Tacacs+ server. If this value is unknown(0), then a system-wide default value will be used. |
| IP rcTacacsServerSourceIpInterface | 1.3.6.1.4.1.2272.1.65.2.1.10 | InetAddress | read-create | IP address of the interface to use with this server. |
| I32 rcTacacsServerPriority | 1.3.6.1.4.1.2272.1.65.2.1.11 | Integer32 | read-create | Determines the order in which the TACACS+ servers will be used, when 1 is the highest priority. If more than one server share the same priority - they will be used in lexicographic order (the order of entries in this table). |
| ROW rcTacacsServerRowStatus | 1.3.6.1.4.1.2272.1.65.2.1.12 | RowStatus | read-create | The row status variable, can be set to destroy or createAndGo. |
| rcIpfix | 1.3.6.1.4.1.2272.1.66 | |||
| rcIpfixMib | 1.3.6.1.4.1.2272.1.66.1 | |||
| rcIpfixConfGlobal | 1.3.6.1.4.1.2272.1.66.1.1 | |||
| ENA rcIpfixConfState | 1.3.6.1.4.1.2272.1.66.1.1.1 | EnableValue | read-write | Enables/Disables the state of ipfix on the box. |
| rcIpfixTable | 1.3.6.1.4.1.2272.1.66.1.2 | |||
| rcIpfixConfSlotTable | 1.3.6.1.4.1.2272.1.66.1.2.1 | not-accessible | A table to store the configuration details for IPFIX for each slot. This table is indexed by slot number. | |
| rcIpfixConfSlotEntry | 1.3.6.1.4.1.2272.1.66.1.2.1.1 | not-accessible | One Entry holding IPFIX config information on slot basis. | |
| I32 rcIpfixConfSlotNum | 1.3.6.1.4.1.2272.1.66.1.2.1.1.1 | Integer32 | not-accessible | Slot number |
| I32 rcIpfixConfSlotAgingIntv | 1.3.6.1.4.1.2272.1.66.1.2.1.1.2 | Integer32 | read-write | Flow record aging interval (Value in seconds). |
| I32 rcIpfixConfSlotActiveTimeout | 1.3.6.1.4.1.2272.1.66.1.2.1.1.3 | Integer32 | read-write | Flow record active timeout value (Value in mins). |
| I32 rcIpfixConfSlotExportIntv | 1.3.6.1.4.1.2272.1.66.1.2.1.1.4 | Integer32 | read-write | Frequency of flow export to collector (Value in sec). |
| ENA rcIpfixConfSlotExportState | 1.3.6.1.4.1.2272.1.66.1.2.1.1.5 | EnableValue | read-write | State of exporter. |
| I32 rcIpfixConfSlotTempRefIntvSec | 1.3.6.1.4.1.2272.1.66.1.2.1.1.6 | Integer32 | read-write | Template refresh timeout. Template is sent out to the collector at least every x seconds or every y exported packets, whichever occurs first. |
| I32 rcIpfixConfSlotTempRefIntvPkts | 1.3.6.1.4.1.2272.1.66.1.2.1.1.7 | Integer32 | read-write | Template refresh timeout. Template is sent out to the collector at least every x seconds or every y exported packets, whichever occurs first. |
| rcIpfixCollectorTable | 1.3.6.1.4.1.2272.1.66.1.2.2 | not-accessible | Table to store the configuration details for IPFIX collector for each slot. This table is indexed by slot number and ip address. | |
| rcIpfixCollectorEntry | 1.3.6.1.4.1.2272.1.66.1.2.2.1 | not-accessible | One entry holds IPFIX collector config information based on slot info and collector ip address. | |
| I32 rcIpfixCollectorSlotNum | 1.3.6.1.4.1.2272.1.66.1.2.2.1.1 | Integer32 | not-accessible | Slot number. An index to the CollectorEntry. |
| IPt rcIpfixCollectorAddressType | 1.3.6.1.4.1.2272.1.66.1.2.2.1.2 | InetAddressType | not-accessible | IP address type of the collector. An index to the CollectorEntry. |
| IP rcIpfixCollectorAddress | 1.3.6.1.4.1.2272.1.66.1.2.2.1.3 | InetAddress | not-accessible | IP address of the collector. An index to the CollectorEntry. |
| INT rcIpfixCollectorProtocol | 1.3.6.1.4.1.2272.1.66.1.2.2.1.4 | INTEGER | read-create | Protocol for export data from exporter to collector . |
| INE rcIpfixCollectorDestPort | 1.3.6.1.4.1.2272.1.66.1.2.2.1.5 | InetPortNumber | read-create | Dest port to send the requests. |
| IPt rcIpfixCollectorExporterIpType | 1.3.6.1.4.1.2272.1.66.1.2.2.1.6 | InetAddressType | read-create | Ip address type of the exporter for collector. |
| IP rcIpfixCollectorExporterIp | 1.3.6.1.4.1.2272.1.66.1.2.2.1.7 | InetAddress | read-create | Ip address of the exporter for collector. |
| INT rcIpfixCollectorProtoVer | 1.3.6.1.4.1.2272.1.66.1.2.2.1.8 | INTEGER | read-create | This specifies the protocol version for ipfix. |
| T/F rcIpfixCollectorState | 1.3.6.1.4.1.2272.1.66.1.2.2.1.9 | TruthValue | read-create | State of the particular collector. Enable is true by default. |
| ROW rcIpfixCollectorRowStatus | 1.3.6.1.4.1.2272.1.66.1.2.2.1.10 | RowStatus | read-create | Used to create/delete entries. |
| rcIpfixConfPortTable | 1.3.6.1.4.1.2272.1.66.1.2.3 | not-accessible | A table to store the configuration details for IPFIX for each port. This table is indexed by port number. | |
| rcIpfixConfPortEntry | 1.3.6.1.4.1.2272.1.66.1.2.3.1 | not-accessible | Entry holding IPFIX config information per port. | |
| NUM rcIpfixConfPortId | 1.3.6.1.4.1.2272.1.66.1.2.3.1.1 | InterfaceIndex | not-accessible | An index to the IpfixConfPortEntry, a unique identifier of the portId |
| I32 rcIpfixConfPortSampleRate | 1.3.6.1.4.1.2272.1.66.1.2.3.1.2 | Integer32 | read-write | Used to configure the sampling rate. Sample one in every N packets. |
| I32 rcIpfixConfPortHashPolyCoeffs | 1.3.6.1.4.1.2272.1.66.1.2.3.1.3 | Integer32 | read-write | Command to set hash polynomial coeffs. |
| I32 rcIpfixConfPortHashPolySeed | 1.3.6.1.4.1.2272.1.66.1.2.3.1.4 | Integer32 | read-write | Command to set hash polynomial seed. |
| INT rcIpfixConfPortFlush | 1.3.6.1.4.1.2272.1.66.1.2.3.1.5 | INTEGER | read-write | This is used to delete all records stored in COP, or to initiate an export of all records and delete data base after the export is finished. |
| ENA rcIpfixConfPortAllTraffic | 1.3.6.1.4.1.2272.1.66.1.2.3.1.6 | EnableValue | read-write | This is used to enable/disable ipfix on all trafiic, for the specified port. |
| INT rcIpfixConfPortHashKeyId | 1.3.6.1.4.1.2272.1.66.1.2.3.1.7 | INTEGER | read-write | hash key id. |
| I32 rcIpfixConfPortDynamicSampRate | 1.3.6.1.4.1.2272.1.66.1.2.3.1.8 | Integer32 | read-only | Indicates the dynamic sampling rate. |
| rcIpfixHashStatsTable | 1.3.6.1.4.1.2272.1.66.1.2.4 | not-accessible | A table of hash Statistics entries to store the statistics for each slot. This table is indexed by the slot number. | |
| rcIpfixHashStatsEntry | 1.3.6.1.4.1.2272.1.66.1.2.4.1 | not-accessible | Entry containing hash statistics information for a particular slot. | |
| I32 rcIpfixHashStatsSlotNum | 1.3.6.1.4.1.2272.1.66.1.2.4.1.1 | Integer32 | not-accessible | A unique identifier for the table. |
| C64 rcIpfixHashStatsHashOverflows | 1.3.6.1.4.1.2272.1.66.1.2.4.1.2 | Counter64 | read-only | Count of hash overflows per slot. |
| C64 rcIpfixHashStatsHashDrops | 1.3.6.1.4.1.2272.1.66.1.2.4.1.3 | Counter64 | read-only | Count of hash drops per slot. |
| INT rcIpfixHashStatsClear | 1.3.6.1.4.1.2272.1.66.1.2.4.1.4 | INTEGER | read-write | Setting this object will clear hash statistics for a slot. |
| TIM rcIpfixHashStatsClearTime | 1.3.6.1.4.1.2272.1.66.1.2.4.1.5 | TimeStamp | read-only | The value of sysUpTime when the hash statistics were last cleared. |
| rcIpfixExporterStatsTable | 1.3.6.1.4.1.2272.1.66.1.2.5 | not-accessible | A table of Exporter Statistics entries to store the statistics for each slot, each collector. This table is indexed by the slot number and collector address. | |
| rcIpfixExporterStatsEntry | 1.3.6.1.4.1.2272.1.66.1.2.5.1 | not-accessible | Entry containing Exporter statistics information for a particular slot and particular collector. | |
| I32 rcIpfixExporterStatsSlotNum | 1.3.6.1.4.1.2272.1.66.1.2.5.1.1 | Integer32 | not-accessible | Index for the table, slot number. |
| IPt rcIpfixExporterStatsCollectorType | 1.3.6.1.4.1.2272.1.66.1.2.5.1.2 | InetAddressType | not-accessible | Collector IP address type. This is an index for the table. |
| IP rcIpfixExporterStatsCollector | 1.3.6.1.4.1.2272.1.66.1.2.5.1.3 | InetAddress | not-accessible | Index for the table, collector address. |
| C64 rcIpfixExporterStatsOutPkts | 1.3.6.1.4.1.2272.1.66.1.2.5.1.4 | Counter64 | read-only | Number of Packets sent. |
| C64 rcIpfixExporterStatsOutOctets | 1.3.6.1.4.1.2272.1.66.1.2.5.1.5 | Counter64 | read-only | Number of Bytes sent. |
| C64 rcIpfixExporterStatsPktsLoss | 1.3.6.1.4.1.2272.1.66.1.2.5.1.6 | Counter64 | read-only | Number of Records lost. |
| INT rcIpfixExporterStatsClear | 1.3.6.1.4.1.2272.1.66.1.2.5.1.7 | INTEGER | read-write | Setting this object will clear exporter statistics. |
| TIM rcIpfixExporterStatsClearTime | 1.3.6.1.4.1.2272.1.66.1.2.5.1.8 | TimeStamp | read-only | The value of sysUpTime when exporter statistics were last cleared. |
| rcOspfv3 | 1.3.6.1.4.1.2272.1.67 | |||
| rcOspfv3Mib | 1.3.6.1.4.1.2272.1.67.1 | |||
| rcOspfv3Objects | 1.3.6.1.4.1.2272.1.67.1.1 | |||
| rcOspfv3GeneralGroup | 1.3.6.1.4.1.2272.1.67.1.1.1 | |||
| IP rcOspfv3RouterId | 1.3.6.1.4.1.2272.1.67.1.1.1.1 | IpAddress | read-write | A 32-bit integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 interface addresses if IPv4 is configured on the router. |
| INT rcOspfv3AdminStat | 1.3.6.1.4.1.2272.1.67.1.1.1.2 | INTEGER | read-write | The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one inter- face; 'disabled' disables it on all inter- faces. |
| INT rcOspfv3VersionNumber | 1.3.6.1.4.1.2272.1.67.1.1.1.3 | INTEGER | read-only | The version number of OSPF for IPv6 is 3. |
| T/F rcOspfv3AreaBdrRtrStatus | 1.3.6.1.4.1.2272.1.67.1.1.1.4 | TruthValue | read-only | A flag to note whether this router is an area border router. |
| T/F rcOspfv3ASBdrRtrStatus | 1.3.6.1.4.1.2272.1.67.1.1.1.5 | TruthValue | read-write | A flag to note whether this router is config- ured as an Autonomous System border router. |
| G32 rcOspfv3AsScopeLsaCount | 1.3.6.1.4.1.2272.1.67.1.1.1.6 | Gauge32 | read-only | The number of AS-Scope (e.g. AS-External) link-state advertisements in the link-state database. |
| I32 rcOspfv3AsScopeLsaCksumSum | 1.3.6.1.4.1.2272.1.67.1.1.1.7 | Integer32 | read-only | The 32-bit unsigned sum of the LS checksums of the AS-scoped link-state advertisements con- tained in the link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. |
| C32 rcOspfv3OriginateNewLsas | 1.3.6.1.4.1.2272.1.67.1.1.1.8 | Counter32 | read-only | The number of new link-state advertisements that have been originated. This number is in- cremented each time the router originates a new LSA. |
| C32 rcOspfv3RxNewLsas | 1.3.6.1.4.1.2272.1.67.1.1.1.9 | Counter32 | read-only | The number of link-state advertisements re- ceived determined to be new instantiations. This number does not include newer instantia- tions of self-originated link-state advertise- ments. |
| G32 rcOspfv3ExtLsaCount | 1.3.6.1.4.1.2272.1.67.1.1.1.10 | Gauge32 | read-only | The number of External(LS type 0x4005) in the link- state database |
| I32 rcOspfv3ExtAreaLsdbLimit | 1.3.6.1.4.1.2272.1.67.1.1.1.11 | Integer32 | read-write | The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches rcOspfv3ExtAreaLsdbLimit, the router enters Overflow- State. The router never holds more than rcOspfv3ExtAreaLsdbLimit non-default AS-external-LSAs in its database. OspfExtAreaLsdbLimit MUST be set identically in all routers attached to the OSPFv3 backbone and/or any regular OSPFv3 area. (i.e., OSPFv3 stub areas and NSSAs are excluded). |
| BIT rcOspfv3MulticastExtensions | 1.3.6.1.4.1.2272.1.67.1.1.1.12 | Bits | read-write | A Bit Mask indicating whether the router is forwarding IPv6 multicast datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. If intraAreaMulticast set, indicates that the router can forward IPv6 multicast datagrams in the router's directly attached areas (called intra-area mul- ticast routing). If interAreaMulticast set, indicates that the router can forward IPv6 multicast datagrams between OSPFv3 areas (called inter-area multicast routing). If interAsMulticast set, indicates that the router can forward IPv6 multicast datagrams between Auto- nomous Systems (called inter-AS multicast rout- ing). Only certain combinations of bit settings are allowed, namely: - All bits cleared (no multicasting) - intraAreaMulticast only, - intraAreaMulticast and interAreaMulticast, - intraAreaMulticast and interAsMulticast - intraAreaMulticast, interAreaMulticast and interAsMulticast By default, all bits are cleared. |
| U32 rcOspfv3ExitOverflowInterval | 1.3.6.1.4.1.2272.1.67.1.1.1.13 | Unsigned32 | read-write | The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-External-LSAs. When set to 0, the router will not leave Overflow- State until restarted. |
| T/F rcOspfv3DemandExtensions | 1.3.6.1.4.1.2272.1.67.1.1.1.14 | TruthValue | read-write | The router's support for demand routing. |
| T/F rcOspfv3TrafficEngineeringSupport | 1.3.6.1.4.1.2272.1.67.1.1.1.15 | TruthValue | read-write | The router's support for traffic engineering extensions. |
| U32 rcOspfv3ReferenceBandwidth | 1.3.6.1.4.1.2272.1.67.1.1.1.16 | Unsigned32 | read-write | Reference bandwidth in kilobits/second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS) |
| INT rcOspfv3RestartSupport | 1.3.6.1.4.1.2272.1.67.1.1.1.17 | INTEGER | read-write | The router's support for OSPF hitless restart. Options include: no restart support, only planned restarts or both planned and unplanned restarts. |
| I32 rcOspfv3RestartInterval | 1.3.6.1.4.1.2272.1.67.1.1.1.18 | Integer32 | read-write | Configured OSPF hitless restart timeout interval. |
| INT rcOspfv3RestartStatus | 1.3.6.1.4.1.2272.1.67.1.1.1.19 | INTEGER | read-only | Current status of OSPF hitless restart. |
| I32 rcOspfv3RestartAge | 1.3.6.1.4.1.2272.1.67.1.1.1.20 | Integer32 | read-only | Remaining time in current OSPF hitless restart interval. |
| INT rcOspfv3RestartExitReason | 1.3.6.1.4.1.2272.1.67.1.1.1.21 | INTEGER | read-only | Describes the outcome of the last attempt at a hitless restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a restart attempt is currently underway. |
| INT rcOspfv3BadLsaIgnore | 1.3.6.1.4.1.2272.1.67.1.1.1.22 | INTEGER | read-write | The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one inter- face; 'disabled' disables it on all inter- faces. |
| rcOspfv3AreaTable | 1.3.6.1.4.1.2272.1.67.1.1.2 | not-accessible | Information describing the configured parame- ters and cumulative statistics of the router's attached areas. | |
| rcOspfv3AreaEntry | 1.3.6.1.4.1.2272.1.67.1.1.2.1 | not-accessible | Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas. | |
| IP rcOspfv3AreaId | 1.3.6.1.4.1.2272.1.67.1.1.2.1.1 | IpAddress | not-accessible | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPFv3 backbone. |
| INT rcOspfv3ImportAsExtern | 1.3.6.1.4.1.2272.1.67.1.1.2.1.2 | INTEGER | read-write | Indicates whether an area is a Stub area, NSSA, or standard area. AS-scope LSAs are not imported into Stub Areas or NSSAs. NSSAs import AS-External data as Type-7 LSAs which have Area-scope |
| C32 rcOspfv3AreaSpfRuns | 1.3.6.1.4.1.2272.1.67.1.1.2.1.3 | Counter32 | read-only | The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm. |
| G32 rcOspfv3AreaBdrRtrCount | 1.3.6.1.4.1.2272.1.67.1.1.2.1.4 | Gauge32 | read-only | The total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass. |
| G32 rcOspfv3AreaAsBdrRtrCount | 1.3.6.1.4.1.2272.1.67.1.1.2.1.5 | Gauge32 | read-only | The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| G32 rcOspfv3AreaScopeLsaCount | 1.3.6.1.4.1.2272.1.67.1.1.2.1.6 | Gauge32 | read-only | The total number of Area-Scope link-state advertisements in this area's link-state database. |
| I32 rcOspfv3AreaScopeLsaCksumSum | 1.3.6.1.4.1.2272.1.67.1.1.2.1.7 | Integer32 | read-only | The 32-bit unsigned sum of the Area-Scope link-state advertisements' LS checksums contained in this area's link-state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. |
| INT rcOspfv3AreaSummary | 1.3.6.1.4.1.2272.1.67.1.1.2.1.8 | INTEGER | read-write | The variable rcOspfv3AreaSummary controls the im- port of Inter-Area LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate Inter-Area LSAs into the stub area. It will rely entirely on its de- fault route. If it is sendAreaSummary, the router will both summarize and propagate Inter-Area LSAs. |
| ROW rcOspfv3AreaStatus | 1.3.6.1.4.1.2272.1.67.1.1.2.1.9 | RowStatus | read-create | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| I32 rcOspfv3StubMetric | 1.3.6.1.4.1.2272.1.67.1.1.2.1.10 | Integer32 | read-write | The metric value advertised for the default route into Stub and NSSA areas. |
| INT rcOspfv3AreaNssaTranslatorRole | 1.3.6.1.4.1.2272.1.67.1.1.2.1.11 | INTEGER | read-write | Indicates an NSSA Border router's ability to perform NSSA translation of type-7 LSAs into type-5 LSAs. |
| INT rcOspfv3AreaNssaTranslatorState | 1.3.6.1.4.1.2272.1.67.1.1.2.1.12 | INTEGER | read-only | Indicates if and how an NSSA Border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object is set to enabled, the NSSA Border router's rcOspfv3AreaNssTranslatorRole has been set to always. When this object is set to elected, a candidate NSSA Border router is translating type-7 LSAs into type-5. When this object is set to disabled, a candidate NSSA Border router is NOT translating type-7 LSAs into type-5. |
| U32 rcOspfv3AreaNssaTranslatorStabilityInterval | 1.3.6.1.4.1.2272.1.67.1.1.2.1.13 | Unsigned32 | read-write | The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties. |
| C32 rcOspfv3AreaNssaTranslatorEvents | 1.3.6.1.4.1.2272.1.67.1.1.2.1.14 | Counter32 | read-only | Indicates the number of Translator State changes that have occurred since the last boot-up. |
| INT rcOspfv3AreaStubMetricType | 1.3.6.1.4.1.2272.1.67.1.1.2.1.15 | INTEGER | read-write | This variable displays the type of metric ad- vertised as a default route. |
| rcOspfv3AsLsdbTable | 1.3.6.1.4.1.2272.1.67.1.1.3 | not-accessible | The OSPFv3 Process's AS-Scope Link State Database. | |
| rcOspfv3AsLsdbEntry | 1.3.6.1.4.1.2272.1.67.1.1.3.1 | not-accessible | A single AS-Scope Link State Advertisement. | |
| INT rcOspfv3AsLsdbType | 1.3.6.1.4.1.2272.1.67.1.1.3.1.1 | INTEGER | not-accessible | The type of the link state advertisement. Each link state type has a separate advertise- ment format. AS-Scope LSAs not recognized by the router may be stored in the database. |
| IP rcOspfv3AsLsdbRouterId | 1.3.6.1.4.1.2272.1.67.1.1.3.1.2 | IpAddress | not-accessible | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| U32 rcOspfv3AsLsdbLsid | 1.3.6.1.4.1.2272.1.67.1.1.3.1.3 | Unsigned32 | not-accessible | The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics. |
| I32 rcOspfv3AsLsdbSequence | 1.3.6.1.4.1.2272.1.67.1.1.3.1.4 | Integer32 | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| I32 rcOspfv3AsLsdbAge | 1.3.6.1.4.1.2272.1.67.1.1.3.1.5 | Integer32 | read-only | This field is the age of the link state adver- tisement in seconds. |
| I32 rcOspfv3AsLsdbChecksum | 1.3.6.1.4.1.2272.1.67.1.1.3.1.6 | Integer32 | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum. |
| OCT rcOspfv3AsLsdbAdvertisement | 1.3.6.1.4.1.2272.1.67.1.1.3.1.7 | OCTET STRING | read-only | The entire Link State Advertisement, including its header. |
| T/F rcOspfv3AsLsdbTypeKnown | 1.3.6.1.4.1.2272.1.67.1.1.3.1.8 | TruthValue | read-only | Is the LSA type recognized by this Router? |
| rcOspfv3AreaLsdbTable | 1.3.6.1.4.1.2272.1.67.1.1.4 | not-accessible | The OSPFv3 Process's Area-Scope Link State Database. | |
| rcOspfv3AreaLsdbEntry | 1.3.6.1.4.1.2272.1.67.1.1.4.1 | not-accessible | A single Area-Scope Link State Advertisement. | |
| IP rcOspfv3AreaLsdbAreaId | 1.3.6.1.4.1.2272.1.67.1.1.4.1.1 | IpAddress | not-accessible | The 32 bit identifier of the Area from which the LSA was received. |
| INT rcOspfv3AreaLsdbType | 1.3.6.1.4.1.2272.1.67.1.1.4.1.2 | INTEGER | not-accessible | The type of the link state advertisement. Each link state type has a separate advertise- ment format. Area-Scope LSAs unrecognized by the router are also stored in this database. |
| IP rcOspfv3AreaLsdbRouterId | 1.3.6.1.4.1.2272.1.67.1.1.4.1.3 | IpAddress | not-accessible | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| U32 rcOspfv3AreaLsdbLsid | 1.3.6.1.4.1.2272.1.67.1.1.4.1.4 | Unsigned32 | not-accessible | The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics. |
| I32 rcOspfv3AreaLsdbSequence | 1.3.6.1.4.1.2272.1.67.1.1.4.1.5 | Integer32 | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| I32 rcOspfv3AreaLsdbAge | 1.3.6.1.4.1.2272.1.67.1.1.4.1.6 | Integer32 | read-only | This field is the age of the link state adver- tisement in seconds. |
| I32 rcOspfv3AreaLsdbChecksum | 1.3.6.1.4.1.2272.1.67.1.1.4.1.7 | Integer32 | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum. |
| OCT rcOspfv3AreaLsdbAdvertisement | 1.3.6.1.4.1.2272.1.67.1.1.4.1.8 | OCTET STRING | read-only | The entire Link State Advertisement, including its header. |
| T/F rcOspfv3AreaLsdbTypeKnown | 1.3.6.1.4.1.2272.1.67.1.1.4.1.9 | TruthValue | read-only | Is the LSA type recognized by this Router? |
| rcOspfv3LinkLsdbTable | 1.3.6.1.4.1.2272.1.67.1.1.5 | not-accessible | The OSPFv3 Process's Link-Scope Link State Database. | |
| rcOspfv3LinkLsdbEntry | 1.3.6.1.4.1.2272.1.67.1.1.5.1 | not-accessible | A single Link-Scope Link State Advertisement. | |
| NUM rcOspfv3LinkLsdbIfIndex | 1.3.6.1.4.1.2272.1.67.1.1.5.1.1 | InterfaceIndex | not-accessible | The identifier of the link from which the LSA was received. |
| INT rcOspfv3LinkLsdbType | 1.3.6.1.4.1.2272.1.67.1.1.5.1.2 | INTEGER | not-accessible | The type of the link state advertisement. Each link state type has a separate advertise- ment format. Link-Scope LSAs unrecognized by the router are also stored in this database. |
| IP rcOspfv3LinkLsdbRouterId | 1.3.6.1.4.1.2272.1.67.1.1.5.1.3 | IpAddress | not-accessible | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| U32 rcOspfv3LinkLsdbLsid | 1.3.6.1.4.1.2272.1.67.1.1.5.1.4 | Unsigned32 | not-accessible | The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics. |
| I32 rcOspfv3LinkLsdbSequence | 1.3.6.1.4.1.2272.1.67.1.1.5.1.5 | Integer32 | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| I32 rcOspfv3LinkLsdbAge | 1.3.6.1.4.1.2272.1.67.1.1.5.1.6 | Integer32 | read-only | This field is the age of the link state advertisement in seconds. |
| I32 rcOspfv3LinkLsdbChecksum | 1.3.6.1.4.1.2272.1.67.1.1.5.1.7 | Integer32 | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum. |
| OCT rcOspfv3LinkLsdbAdvertisement | 1.3.6.1.4.1.2272.1.67.1.1.5.1.8 | OCTET STRING | read-only | The entire Link State Advertisement, including its header. |
| T/F rcOspfv3LinkLsdbTypeKnown | 1.3.6.1.4.1.2272.1.67.1.1.5.1.9 | TruthValue | read-only | Indicates whether the LSA type is recognized by this Router. |
| rcOspfv3HostTable | 1.3.6.1.4.1.2272.1.67.1.1.6 | not-accessible | The list of Hosts, and their metrics, that the router will advertise as host routes. | |
| rcOspfv3HostEntry | 1.3.6.1.4.1.2272.1.67.1.1.6.1 | not-accessible | A metric to be advertised when a given host is reachable. | |
| INT rcOspfv3HostAddressType | 1.3.6.1.4.1.2272.1.67.1.1.6.1.1 | INTEGER | not-accessible | The address type of rcOspfv3HostAddress. Only IPv6 addresses without zone index are expected. |
| OCT rcOspfv3HostAddress | 1.3.6.1.4.1.2272.1.67.1.1.6.1.2 | OCTET STRING | not-accessible | The IPv6 Address of the Host. Must be a Global or Site-local address. |
| I32 rcOspfv3HostMetric | 1.3.6.1.4.1.2272.1.67.1.1.6.1.3 | Integer32 | read-write | The Metric to be advertised. |
| ROW rcOspfv3HostStatus | 1.3.6.1.4.1.2272.1.67.1.1.6.1.4 | RowStatus | read-create | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| IP rcOspfv3HostAreaID | 1.3.6.1.4.1.2272.1.67.1.1.6.1.5 | IpAddress | read-write | The Area the Host Entry is to be found within. By default, the area that a subsuming OSPFv3 in- terface is in, or 0.0.0.0 |
| rcOspfv3IfTable | 1.3.6.1.4.1.2272.1.67.1.1.7 | not-accessible | The OSPFv3 Interface Table describes the inter- faces from the viewpoint of OSPFv3. | |
| rcOspfv3IfEntry | 1.3.6.1.4.1.2272.1.67.1.1.7.1 | not-accessible | The OSPFv3 Interface Entry describes one inter- face from the viewpoint of OSPFv3. | |
| NUM rcOspfv3IfIndex | 1.3.6.1.4.1.2272.1.67.1.1.7.1.1 | InterfaceIndex | not-accessible | The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured. |
| IP rcOspfv3IfAreaId | 1.3.6.1.4.1.2272.1.67.1.1.7.1.2 | IpAddress | read-write | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPFv3 backbone. |
| INT rcOspfv3IfType | 1.3.6.1.4.1.2272.1.67.1.1.7.1.3 | INTEGER | read-write | The OSPFv3 interface type. |
| INT rcOspfv3IfAdminStat | 1.3.6.1.4.1.2272.1.67.1.1.7.1.4 | INTEGER | read-write | The OSPFv3 interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPFv3. |
| I32 rcOspfv3IfRtrPriority | 1.3.6.1.4.1.2272.1.67.1.1.7.1.5 | Integer32 | read-write | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker. |
| I32 rcOspfv3IfTransitDelay | 1.3.6.1.4.1.2272.1.67.1.1.7.1.6 | Integer32 | read-write | The estimated number of seconds it takes to transmit a link state update packet over this interface. |
| I32 rcOspfv3IfRetransInterval | 1.3.6.1.4.1.2272.1.67.1.1.7.1.7 | Integer32 | read-write | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets. |
| I32 rcOspfv3IfHelloInterval | 1.3.6.1.4.1.2272.1.67.1.1.7.1.8 | Integer32 | read-write | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network. |
| I32 rcOspfv3IfRtrDeadInterval | 1.3.6.1.4.1.2272.1.67.1.1.7.1.9 | Integer32 | read-write | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. |
| U32 rcOspfv3IfPollInterval | 1.3.6.1.4.1.2272.1.67.1.1.7.1.10 | Unsigned32 | read-write | The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. |
| INT rcOspfv3IfState | 1.3.6.1.4.1.2272.1.67.1.1.7.1.11 | INTEGER | read-only | The OSPFv3 Interface State. |
| IP rcOspfv3IfDesignatedRouter | 1.3.6.1.4.1.2272.1.67.1.1.7.1.12 | IpAddress | read-only | The Router ID of the Designated Router. |
| IP rcOspfv3IfBackupDesignatedRouter | 1.3.6.1.4.1.2272.1.67.1.1.7.1.14 | IpAddress | read-only | The Router ID of the Backup Designated Router. |
| C32 rcOspfv3IfEvents | 1.3.6.1.4.1.2272.1.67.1.1.7.1.15 | Counter32 | read-only | The number of times this OSPF interface has changed its state, or an error has occurred. |
| ROW rcOspfv3IfStatus | 1.3.6.1.4.1.2272.1.67.1.1.7.1.17 | RowStatus | read-create | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| INT rcOspfv3IfMulticastForwarding | 1.3.6.1.4.1.2272.1.67.1.1.7.1.18 | INTEGER | read-write | The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NBMA interfaces, and setting rcOspfv3MulticastForwarding to 0 effective- ly disables all multicast forwarding. |
| T/F rcOspfv3IfDemand | 1.3.6.1.4.1.2272.1.67.1.1.7.1.19 | TruthValue | read-write | Indicates whether Demand OSPFv3 procedures (hel- lo suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be per- formed on this interface. |
| I32 rcOspfv3IfMetricValue | 1.3.6.1.4.1.2272.1.67.1.1.7.1.20 | Integer32 | read-write | The metric assigned to this interface. The default value of the Metric is Reference Bandwidth / ifSpeed. The value of the reference bandwidth is configured by the rcOspfv3ReferenceBandwidth object. A value of '0' means the metric value of this interface will depend on the speed of the interface, when the state of the interface is up. The default (0) metric for Vlan and Tunnel is 10. |
| G32 rcOspfv3IfLinkScopeLsaCount | 1.3.6.1.4.1.2272.1.67.1.1.7.1.21 | Gauge32 | read-only | The total number of Link-Scope link-state advertisements in this link's link-state database. |
| I32 rcOspfv3IfLinkLsaCksumSum | 1.3.6.1.4.1.2272.1.67.1.1.7.1.22 | Integer32 | read-only | The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this link's link-state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. |
| I32 rcOspfv3IfInstId | 1.3.6.1.4.1.2272.1.67.1.1.7.1.23 | Integer32 | read-write | Enables multiple instances of OSPFv3 to be run over a single link. Each protocol instance would be assigned a separate ID. This ID has local link significance only. |
| T/F rcOspfv3IfDemandNbrProbe | 1.3.6.1.4.1.2272.1.67.1.1.7.1.24 | TruthValue | read-write | Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is disabled by default. |
| U32 rcOspfv3IfDemandNbrProbeRetxLimit | 1.3.6.1.4.1.2272.1.67.1.1.7.1.25 | Unsigned32 | read-write | The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down. |
| U32 rcOspfv3IfDemandNbrProbeInterval | 1.3.6.1.4.1.2272.1.67.1.1.7.1.26 | Unsigned32 | read-write | Defines how often the neighbor will be probed. |
| rcOspfv3VirtIfTable | 1.3.6.1.4.1.2272.1.67.1.1.8 | not-accessible | Information about this router's virtual inter- faces. | |
| rcOspfv3VirtIfEntry | 1.3.6.1.4.1.2272.1.67.1.1.8.1 | not-accessible | Information about a single Virtual Interface. | |
| IP rcOspfv3VirtIfAreaId | 1.3.6.1.4.1.2272.1.67.1.1.8.1.1 | IpAddress | not-accessible | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| IP rcOspfv3VirtIfNeighbor | 1.3.6.1.4.1.2272.1.67.1.1.8.1.2 | IpAddress | not-accessible | The Router ID of the Virtual Neighbor. |
| I32 rcOspfv3VirtIfIndex | 1.3.6.1.4.1.2272.1.67.1.1.8.1.3 | Integer32 | read-only | The interface ID assigned to this OSPFv3 virtual interface. It is advertised in Hello's sent over the virtal link and in the router's router-LSAs. |
| I32 rcOspfv3VirtIfTransitDelay | 1.3.6.1.4.1.2272.1.67.1.1.8.1.4 | Integer32 | read-write | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| I32 rcOspfv3VirtIfRetransInterval | 1.3.6.1.4.1.2272.1.67.1.1.8.1.5 | Integer32 | read-write | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets. This value should be well over the expected round- trip time. |
| I32 rcOspfv3VirtIfHelloInterval | 1.3.6.1.4.1.2272.1.67.1.1.8.1.6 | Integer32 | read-write | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor. |
| I32 rcOspfv3VirtIfRtrDeadInterval | 1.3.6.1.4.1.2272.1.67.1.1.8.1.7 | Integer32 | read-write | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor. |
| INT rcOspfv3VirtIfState | 1.3.6.1.4.1.2272.1.67.1.1.8.1.8 | INTEGER | read-only | OSPF virtual interface states. |
| C32 rcOspfv3VirtIfEvents | 1.3.6.1.4.1.2272.1.67.1.1.8.1.9 | Counter32 | read-only | The number of state changes or error events on this Virtual Link |
| ROW rcOspfv3VirtIfStatus | 1.3.6.1.4.1.2272.1.67.1.1.8.1.10 | RowStatus | read-create | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| G32 rcOspfv3VirtIfLinkScopeLsaCount | 1.3.6.1.4.1.2272.1.67.1.1.8.1.11 | Gauge32 | read-only | The total number of Link-Scope link-state advertisements in this virtual link's link-state database. |
| I32 rcOspfv3VirtIfLinkLsaCksumSum | 1.3.6.1.4.1.2272.1.67.1.1.8.1.12 | Integer32 | read-only | The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this virtual link's link-state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. |
| rcOspfv3NbrTable | 1.3.6.1.4.1.2272.1.67.1.1.9 | not-accessible | A table of non-virtual neighbor information. | |
| rcOspfv3NbrEntry | 1.3.6.1.4.1.2272.1.67.1.1.9.1 | not-accessible | The information regarding a single neighbor. | |
| NUM rcOspfv3NbrIfIndex | 1.3.6.1.4.1.2272.1.67.1.1.9.1.1 | InterfaceIndex | not-accessible | The local link ID of the link over which the neighbor can be reached. |
| IP rcOspfv3NbrRtrId | 1.3.6.1.4.1.2272.1.67.1.1.9.1.2 | IpAddress | not-accessible | A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. |
| INT rcOspfv3NbrAddressType | 1.3.6.1.4.1.2272.1.67.1.1.9.1.3 | INTEGER | read-only | The address type of rcOspfv3NbrAddress. Only IPv6 addresses without zone index are expected. |
| OCT rcOspfv3NbrAddress | 1.3.6.1.4.1.2272.1.67.1.1.9.1.4 | OCTET STRING | read-only | The IPv6 address of the neighbor associated with the local link. |
| I32 rcOspfv3NbrOptions | 1.3.6.1.4.1.2272.1.67.1.1.9.1.5 | Integer32 | read-only | A Bit Mask corresponding to the neighbor's op- tions field. |
| INT rcOspfv3NbrPriority | 1.3.6.1.4.1.2272.1.67.1.1.9.1.6 | INTEGER | read-only | The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network. |
| INT rcOspfv3NbrState | 1.3.6.1.4.1.2272.1.67.1.1.9.1.7 | INTEGER | read-only | The State of the relationship with this Neigh- bor. |
| C32 rcOspfv3NbrEvents | 1.3.6.1.4.1.2272.1.67.1.1.9.1.8 | Counter32 | read-only | The number of times this neighbor relationship has changed state, or an error has occurred. |
| G32 rcOspfv3NbrLsRetransQLen | 1.3.6.1.4.1.2272.1.67.1.1.9.1.9 | Gauge32 | read-only | The current length of the retransmission queue. |
| T/F rcOspfv3NbrHelloSuppressed | 1.3.6.1.4.1.2272.1.67.1.1.9.1.10 | TruthValue | read-only | Indicates whether Hellos are being suppressed to the neighbor |
| I32 rcOspfv3NbrIfId | 1.3.6.1.4.1.2272.1.67.1.1.9.1.11 | Integer32 | read-only | The interface ID that the neighbor advertises in its Hello Packets on this link, that is, the neighbor's local interface index. |
| INT rcOspfv3NbrRestartHelperStatus | 1.3.6.1.4.1.2272.1.67.1.1.9.1.12 | INTEGER | read-only | Indicates whether the router is acting as a hitless restart helper for the neighbor. |
| I32 rcOspfv3NbrRestartHelperAge | 1.3.6.1.4.1.2272.1.67.1.1.9.1.13 | Integer32 | read-only | Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor. |
| INT rcOspfv3NbrRestartHelperExitReason | 1.3.6.1.4.1.2272.1.67.1.1.9.1.14 | INTEGER | read-only | Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor. |
| rcOspfv3NbmaNbrTable | 1.3.6.1.4.1.2272.1.67.1.1.10 | not-accessible | A table of configured non-virtual neighbor information and neighbors dynamically discovered by lower-level protocols such as Inverse Neighbor Discovery. | |
| rcOspfv3NbmaNbrEntry | 1.3.6.1.4.1.2272.1.67.1.1.10.1 | not-accessible | The information regarding a single configured neighbor or neighbor discovered by lower-level protocols such as Inverse Neighbor Discovery. | |
| NUM rcOspfv3NbmaNbrIfIndex | 1.3.6.1.4.1.2272.1.67.1.1.10.1.1 | InterfaceIndex | not-accessible | The local link ID of the link over which the neighbor can be reached. |
| ADR rcOspfv3NbmaNbrAddress | 1.3.6.1.4.1.2272.1.67.1.1.10.1.2 | Ipv6Address | not-accessible | The IPv6 address of the neighbor associated with the local link. |
| INT rcOspfv3NbmaNbrPriority | 1.3.6.1.4.1.2272.1.67.1.1.10.1.3 | INTEGER | read-write | The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network. |
| IP rcOspfv3NbmaNbrRtrId | 1.3.6.1.4.1.2272.1.67.1.1.10.1.4 | IpAddress | read-only | A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. A value of 0.0.0.0 is returned until a Hello is received from the configured neighbor. |
| INT rcOspfv3NbmaNbrState | 1.3.6.1.4.1.2272.1.67.1.1.10.1.5 | INTEGER | read-only | The State of the relationship with this Neigh- bor. |
| STO rcOspfv3NbmaNbrStorageType | 1.3.6.1.4.1.2272.1.67.1.1.10.1.6 | StorageType | read-write | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. Manually configured entries will have a storage type of nonVolatile while entries dynamically created as a result of a lower-level protocol such as Inverse Neighbor Discovery will have a storage type of volatile. |
| ROW rcOspfv3NbmaNbrStatus | 1.3.6.1.4.1.2272.1.67.1.1.10.1.7 | RowStatus | read-create | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| rcOspfv3VirtNbrTable | 1.3.6.1.4.1.2272.1.67.1.1.11 | not-accessible | A table of virtual neighbor information. | |
| rcOspfv3VirtNbrEntry | 1.3.6.1.4.1.2272.1.67.1.1.11.1 | not-accessible | Virtual neighbor information. | |
| IP rcOspfv3VirtNbrArea | 1.3.6.1.4.1.2272.1.67.1.1.11.1.1 | IpAddress | not-accessible | The Transit Area Identifier. |
| IP rcOspfv3VirtNbrRtrId | 1.3.6.1.4.1.2272.1.67.1.1.11.1.2 | IpAddress | not-accessible | A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. |
| I32 rcOspfv3VirtNbrIfIndex | 1.3.6.1.4.1.2272.1.67.1.1.11.1.3 | Integer32 | read-only | The local interface ID for the virtual link over which the neighbor can be reached. |
| INT rcOspfv3VirtNbrAddressType | 1.3.6.1.4.1.2272.1.67.1.1.11.1.4 | INTEGER | read-only | The address type of rcOspfv3VirtNbrAddress. Only IPv6 addresses without zone index are expected. |
| OCT rcOspfv3VirtNbrAddress | 1.3.6.1.4.1.2272.1.67.1.1.11.1.5 | OCTET STRING | read-only | The IPv6 address advertised by this Virtual Neighbor. It must be a Site-Local or Global scope address. |
| I32 rcOspfv3VirtNbrOptions | 1.3.6.1.4.1.2272.1.67.1.1.11.1.6 | Integer32 | read-only | A Bit Mask corresponding to the neighbor's op- tions field. |
| INT rcOspfv3VirtNbrState | 1.3.6.1.4.1.2272.1.67.1.1.11.1.7 | INTEGER | read-only | The state of the Virtual Neighbor Relation- ship. |
| C32 rcOspfv3VirtNbrEvents | 1.3.6.1.4.1.2272.1.67.1.1.11.1.8 | Counter32 | read-only | The number of times this virtual link has changed its state, or an error has occurred. |
| G32 rcOspfv3VirtNbrLsRetransQLen | 1.3.6.1.4.1.2272.1.67.1.1.11.1.9 | Gauge32 | read-only | The current length of the retransmission queue. |
| T/F rcOspfv3VirtNbrHelloSuppressed | 1.3.6.1.4.1.2272.1.67.1.1.11.1.10 | TruthValue | read-only | Indicates whether Hellos are being suppressed to the neighbor |
| I32 rcOspfv3VirtNbrIfId | 1.3.6.1.4.1.2272.1.67.1.1.11.1.11 | Integer32 | read-only | The interface ID that the neighbor advertises in its Hello Packets on this virtual link, that is, the neighbor's local interface ID. |
| INT rcOspfv3VirtNbrRestartHelperStatus | 1.3.6.1.4.1.2272.1.67.1.1.11.1.12 | INTEGER | read-only | Indicates whether the router is acting as a hitless restart helper for the neighbor. |
| I32 rcOspfv3VirtNbrRestartHelperAge | 1.3.6.1.4.1.2272.1.67.1.1.11.1.13 | Integer32 | read-only | Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor. |
| INT rcOspfv3VirtNbrRestartHelperExitReason | 1.3.6.1.4.1.2272.1.67.1.1.11.1.14 | INTEGER | read-only | Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor. |
| rcOspfv3AreaAggregateTable | 1.3.6.1.4.1.2272.1.67.1.1.12 | not-accessible | A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range sub- sumes another range the most specific match is the preferred one. | |
| rcOspfv3AreaAggregateEntry | 1.3.6.1.4.1.2272.1.67.1.1.12.1 | not-accessible | A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range sub- sumes another range the most specific match is the preferred one. | |
| IP rcOspfv3AreaAggregateAreaID | 1.3.6.1.4.1.2272.1.67.1.1.12.1.1 | IpAddress | not-accessible | The Area the Address Aggregate is to be found within. |
| INT rcOspfv3AreaAggregateAreaLsdbType | 1.3.6.1.4.1.2272.1.67.1.1.12.1.2 | INTEGER | not-accessible | The type of the Address Aggregate. This field specifies the Area Lsdb type that this Address Ag- gregate applies to. |
| ADR rcOspfv3AreaAggregatePrefix | 1.3.6.1.4.1.2272.1.67.1.1.12.1.3 | Ipv6Address | not-accessible | The IPv6 Prefix. |
| U32 rcOspfv3AreaAggregatePrefixLength | 1.3.6.1.4.1.2272.1.67.1.1.12.1.4 | Unsigned32 | not-accessible | The length of the prefix (in bits). A prefix can not be shorter than 3 bits. |
| ROW rcOspfv3AreaAggregateStatus | 1.3.6.1.4.1.2272.1.67.1.1.12.1.5 | RowStatus | read-create | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| INT rcOspfv3AreaAggregateEffect | 1.3.6.1.4.1.2272.1.67.1.1.12.1.6 | INTEGER | read-write | Prefixes subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the prefix not being advertised at all outside the area. |
| I32 rcOspfv3AreaAggregateRouteTag | 1.3.6.1.4.1.2272.1.67.1.1.12.1.7 | Integer32 | read-write | This tag is advertised only in the summarized As-External LSA when summarizing from type-7 to type-5. |
| INT rcOspfv3AreaAggregateAdvertiseMetric | 1.3.6.1.4.1.2272.1.67.1.1.12.1.8 | INTEGER | read-write | Used to specify a metric for a Summary LSA (type 3) generated by OSPF through an area range. If this metric is set to 0, OSPF uses the cost to the farthest point in the networks being summarized as the metric. |
| rcOspfv3Stats | 1.3.6.1.4.1.2272.1.67.1.1.13 | |||
| C32 rcOspfv3StatsTxPackets | 1.3.6.1.4.1.2272.1.67.1.1.13.1 | Counter32 | read-only | Used to indicate the number of packets transmitted by OSPF. |
| C32 rcOspfv3StatsRxPackets | 1.3.6.1.4.1.2272.1.67.1.1.13.2 | Counter32 | read-only | Used to indicate the number of packets received by OSPF. |
| C32 rcOspfv3StatsTxDropPackets | 1.3.6.1.4.1.2272.1.67.1.1.13.3 | Counter32 | read-only | Used to indicate the number of packets dropped before transmitted by OSPF. |
| C32 rcOspfv3StatsRxDropPackets | 1.3.6.1.4.1.2272.1.67.1.1.13.4 | Counter32 | read-only | Used to indicate the number of packets dropped before received by OSPF. |
| C32 rcOspfv3StatsRxBadPackets | 1.3.6.1.4.1.2272.1.67.1.1.13.5 | Counter32 | read-only | Used to indicate the number of packets received by OSPF that are bad. |
| C32 rcOspfv3StatsSpfRuns | 1.3.6.1.4.1.2272.1.67.1.1.13.6 | Counter32 | read-only | Used to indicate the total number of SPF calculations performed by OSPF, which also includes the number of partial route table calculation for Incremental Updates. |
| TIK rcOspfv3StatsLastSpfRun | 1.3.6.1.4.1.2272.1.67.1.1.13.7 | TimeTicks | read-only | Used to indicate the time(SysUpTime) since the last spf calculated by OSPF. |
| G32 rcOspfv3StatsLsdbTblSize | 1.3.6.1.4.1.2272.1.67.1.1.13.8 | Gauge32 | read-only | Used to indicate the number of entries in the linkstate database table. |
| C32 rcOspfv3StatsBadLsReqs | 1.3.6.1.4.1.2272.1.67.1.1.13.9 | Counter32 | read-only | Used to indicate the number of bad ls requests. |
| C32 rcOspfv3StatsSeqMismatches | 1.3.6.1.4.1.2272.1.67.1.1.13.10 | Counter32 | read-only | Used to indicate the number of sequence mismatched packets. |
| rcOspfv3Conformance | 1.3.6.1.4.1.2272.1.67.1.2 | |||
| rcOspfv3Groups | 1.3.6.1.4.1.2272.1.67.1.2.1 | |||
| rcOspfv3BasicGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.1 | These objects are required for OSPFv3 systems. | ||
| rcOspfv3AreaGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.2 | These objects are required for OSPFv3 systems supporting areas. | ||
| rcOspfv3AsLsdbGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.3 | These objects are required for OSPFv3 systems that display their AS-scope link state database. | ||
| rcOspfv3AreaLsdbGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.4 | These objects are required for OSPFv3 systems that display their Area-scope link state database. | ||
| rcOspfv3LinkLsdbGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.5 | These objects are required for OSPFv3 systems that display their Link-scope link state database. | ||
| rcOspfv3HostGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.6 | These objects are required for OSPFv3 systems that support attached hosts. | ||
| rcOspfv3IfGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.7 | These interface objects are required for OSPFv3 systems. | ||
| rcOspfv3VirtIfGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.8 | These virtual interface objects are required for OSPFv3 systems. | ||
| rcOspfv3NbrGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.9 | These neighbor objects are required for OSPFv3 systems. | ||
| rcOspfv3NbmaNbrGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.10 | These NBMA neighbor objects are required for OSPFv3 systems. | ||
| rcOspfv3VirtNbrGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.11 | These virtual neighbor objects are required for OSPFv3 systems. | ||
| rcOspfv3AreaAggregateGroup | 1.3.6.1.4.1.2272.1.67.1.2.1.12 | These area aggregate objects are required for OSPFv3 systems. | ||
| rcOspfv3Compliances | 1.3.6.1.4.1.2272.1.67.1.2.2 | |||
| rcOspfv3Compliance | 1.3.6.1.4.1.2272.1.67.1.2.2.1 | The compliance statement | ||
| rcCfm | 1.3.6.1.4.1.2272.1.69 | |||
| rcCfmMaintenanceDomainTable | 1.3.6.1.4.1.2272.1.69.1 | not-accessible | Connectivity Fault Management Maintenance Domain table | |
| rcCfmMaintenanceDomainEntry | 1.3.6.1.4.1.2272.1.69.1.1 | not-accessible | Connectivity Fault Management Maintenance Domain entry. | |
| INT rcCfmMaintenanceDomainIndex | 1.3.6.1.4.1.2272.1.69.1.1.1 | INTEGER | not-accessible | Maintenance Domain index |
| STR rcCfmMaintenanceDomainName | 1.3.6.1.4.1.2272.1.69.1.1.2 | DisplayString | read-create | Maintenance Domain Name |
| ROW rcCfmMaintenanceDomainRowStatus | 1.3.6.1.4.1.2272.1.69.1.1.3 | RowStatus | read-create | Used to create/delete entries |
| I32 rcCfmMaintenanceDomainNumOfMa | 1.3.6.1.4.1.2272.1.69.1.1.4 | Integer32 | read-only | Used to indicate the number of MAs belong to this maintenance domain |
| INT rcCfmMaintenanceDomainLevel | 1.3.6.1.4.1.2272.1.69.1.1.6 | INTEGER | read-create | To set the maintenance level in this domain |
| I32 rcCfmMaintenanceDomainNumOfMip | 1.3.6.1.4.1.2272.1.69.1.1.7 | Integer32 | read-only | Used to indicate the number of Mips belong to this maintenance domain |
| INT rcCfmMaintenanceDomainType | 1.3.6.1.4.1.2272.1.69.1.1.8 | INTEGER | read-only | To indicate the type of domain |
| rcCfmMaintenanceAssociationTable | 1.3.6.1.4.1.2272.1.69.2 | not-accessible | Connectivity Fault Management Maintenance Association table | |
| rcCfmMaintenanceAssociationEntry | 1.3.6.1.4.1.2272.1.69.2.1 | not-accessible | Connectivity Fault Management Maintenance Association entry. | |
| INT rcCfmMaintenanceAssociationDomainIndex | 1.3.6.1.4.1.2272.1.69.2.1.1 | INTEGER | not-accessible | Maintenance Association Domain Index |
| INT rcCfmMaintenanceAssociationAssociationIndex | 1.3.6.1.4.1.2272.1.69.2.1.2 | INTEGER | not-accessible | Maintenance Association Index |
| STR rcCfmMaintenanceAssociationDomainName | 1.3.6.1.4.1.2272.1.69.2.1.3 | DisplayString | read-only | Maintenance Association Domain Name |
| STR rcCfmMaintenanceAssociationAssociationName | 1.3.6.1.4.1.2272.1.69.2.1.4 | DisplayString | read-create | Maintenance Association Name |
| ENA rcCfmMaintenanceAssociationAdminState | 1.3.6.1.4.1.2272.1.69.2.1.5 | EnableValue | read-create | Administratively enable or disable a maintenance association. |
| ROW rcCfmMaintenanceAssociationRowStatus | 1.3.6.1.4.1.2272.1.69.2.1.6 | RowStatus | read-create | Used to create/delete entries |
| I32 rcCfmMaintenanceAssociationNumOfMep | 1.3.6.1.4.1.2272.1.69.2.1.12 | Integer32 | read-only | Used to indicate the number of MEPs belong to this maintenance association |
| rcCfmMaintenanceEndPointTable | 1.3.6.1.4.1.2272.1.69.3 | not-accessible | Connectivity Fault Management Maintenance Association table | |
| rcCfmMaintenanceEndPointEntry | 1.3.6.1.4.1.2272.1.69.3.1 | not-accessible | Connectivity Fault Management Maintenance EndPoint entry. | |
| I32 rcCfmMaintenanceEndPointDomainIndex | 1.3.6.1.4.1.2272.1.69.3.1.1 | Integer32 | not-accessible | Maintenance Domain Name |
| I32 rcCfmMaintenanceEndPointAssociationIndex | 1.3.6.1.4.1.2272.1.69.3.1.2 | Integer32 | not-accessible | Maintenance Association Name |
| I32 rcCfmMaintenanceEndPointId | 1.3.6.1.4.1.2272.1.69.3.1.3 | Integer32 | not-accessible | Maintenance EndPoint ID |
| STR rcCfmMaintenanceEndPointDomainName | 1.3.6.1.4.1.2272.1.69.3.1.4 | DisplayString | read-only | Maintenance Domain Name |
| STR rcCfmMaintenanceEndPointAssociationName | 1.3.6.1.4.1.2272.1.69.3.1.5 | DisplayString | read-only | Maintenance Association Name |
| ENA rcCfmMaintenanceEndPointAdminState | 1.3.6.1.4.1.2272.1.69.3.1.6 | EnableValue | read-create | Administratively enable or disable a maintenance EndPoint. |
| ROW rcCfmMaintenanceEndPointRowStatus | 1.3.6.1.4.1.2272.1.69.3.1.7 | RowStatus | read-create | Used to create/delete entries |
| INT rcCfmMaintenanceEndPointMepType | 1.3.6.1.4.1.2272.1.69.3.1.11 | INTEGER | read-only | Mep Type |
| STR rcCfmMaintenanceEndPointServiceDescription | 1.3.6.1.4.1.2272.1.69.3.1.13 | DisplayString | read-only | Used to specify what service this mep assigned to |
| INT rcCfmMaintenanceEndPointMepStatus | 1.3.6.1.4.1.2272.1.69.3.1.15 | INTEGER | read-only | Indicating if the mep status is active or inactive. Only Dual-Home Ring endpoint client meps can have active/inactive status. All other mep types have active status. |
| rcCfmGlobals | 1.3.6.1.4.1.2272.1.69.10 | |||
| I32 rcCfmGlobalsEtherType | 1.3.6.1.4.1.2272.1.69.10.1 | Integer32 | read-write | CFM Ether Type |
| ENA rcCfmGlobalsSpbmAdminState | 1.3.6.1.4.1.2272.1.69.10.8 | EnableValue | read-write | Enable/Disable global cfm support for SPBM VLANs |
| I32 rcCfmGlobalsSpbmLevel | 1.3.6.1.4.1.2272.1.69.10.9 | Integer32 | read-write | Used to set the global cfm maintenance level for SPBM VLANs |
| I32 rcCfmGlobalsSpbmMepId | 1.3.6.1.4.1.2272.1.69.10.10 | Integer32 | read-write | Set the global cfm Maintenance End Point ID value for SPBM VLANs |
| ENA rcCfmGlobalsCmacAdminState | 1.3.6.1.4.1.2272.1.69.10.11 | EnableValue | read-write | Enable/Disable global cfm support for C-VLANs |
| I32 rcCfmGlobalsCmacLevel | 1.3.6.1.4.1.2272.1.69.10.12 | Integer32 | read-write | Used to set the global cfm maintenance level for C-VLANs |
| I32 rcCfmGlobalsCmacMepId | 1.3.6.1.4.1.2272.1.69.10.13 | Integer32 | read-write | Set the global cfm Maintenance End Point ID value for C-VLANs |
| rcCfmTransmitLbmTable | 1.3.6.1.4.1.2272.1.69.17 | not-accessible | Connectivity Fault Management transmit LBM table | |
| rcCfmTransmitLbmEntry | 1.3.6.1.4.1.2272.1.69.17.1 | not-accessible | Connectivity Fault Management Maintenance EndPoint LBM entry. | |
| I32 rcCfmTransmitLbmDomainIndex | 1.3.6.1.4.1.2272.1.69.17.1.1 | Integer32 | not-accessible | Maintenance Domain Name |
| I32 rcCfmTransmitLbmAssociationIndex | 1.3.6.1.4.1.2272.1.69.17.1.2 | Integer32 | not-accessible | Maintenance Association Name |
| I32 rcCfmTransmitLbmIndex | 1.3.6.1.4.1.2272.1.69.17.1.3 | Integer32 | not-accessible | Maintenance EndPoint Index |
| STR rcCfmTransmitLbmDomainName | 1.3.6.1.4.1.2272.1.69.17.1.4 | DisplayString | read-only | Maintenance Domain Name |
| STR rcCfmTransmitLbmAssociationName | 1.3.6.1.4.1.2272.1.69.17.1.5 | DisplayString | read-only | Maintenance Association Name |
| MAC rcCfmTransmitLbmDestMacAddress | 1.3.6.1.4.1.2272.1.69.17.1.6 | MacAddress | read-write | An indication of the target MAC Address Field to be transmitted, either: A unicast destination MAC address. |
| I32 rcCfmTransmitLbmDestMepId | 1.3.6.1.4.1.2272.1.69.17.1.7 | Integer32 | read-write | An indication of the target MAC Address Field to be transmitted, either: The Maintenance Assiciation End Point identifier of another MEP in the same Maintenance Association |
| T/F rcCfmTransmitLbmDestIsMepId | 1.3.6.1.4.1.2272.1.69.17.1.8 | TruthValue | read-write | True indicates that MepId of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission. |
| I32 rcCfmTransmitLbmMessages | 1.3.6.1.4.1.2272.1.69.17.1.9 | Integer32 | read-write | The number of loopback messages to be transmitted. |
| I32 rcCfmTransmitLbmVlanPriority | 1.3.6.1.4.1.2272.1.69.17.1.11 | Integer32 | read-write | Priority. 3 bit value to be used in the VLAN tsg, if present in the transmitted frame. |
| T/F rcCfmTransmitLbmVlanDropEnable | 1.3.6.1.4.1.2272.1.69.17.1.12 | TruthValue | read-write | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. |
| I32 rcCfmTransmitLbmSeqNumber | 1.3.6.1.4.1.2272.1.69.17.1.13 | Integer32 | read-only | The transaction identifier/sequence number of the first loopback message (to be) sent. |
| T/F rcCfmTransmitLbmResultOk | 1.3.6.1.4.1.2272.1.69.17.1.14 | TruthValue | read-only | Indicates the result of the operation: -true. The Loopback Message(s) will be (or have been) sent. -false. The Loopback Message(s) will not be sent. |
| INT rcCfmTransmitLbmStatus | 1.3.6.1.4.1.2272.1.69.17.1.15 | INTEGER | read-write | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the Loopback messages. -abort The service is aborted or about to abort the Loopback messages. This column will also be used to avoid concurrency or race condition problems that could occur if two or more management entities try to use the service at the same time. |
| STR rcCfmTransmitLbmResult | 1.3.6.1.4.1.2272.1.69.17.1.16 | DisplayString | read-only | Display the LBM result. |
| I32 rcCfmTransmitLbmTimeoutInt | 1.3.6.1.4.1.2272.1.69.17.1.18 | Integer32 | read-write | The interval to wait for an LBM time-out with a range of (1..10) seconds with a default value of 3 seconds. |
| I32 rcCfmTransmitLbmInterFrameInt | 1.3.6.1.4.1.2272.1.69.17.1.19 | Integer32 | read-write | The interval between LBM frames with a range of (0..1000) msecs with a default value of 500 msecs. The value of 0 msecs indicates to send the frames as fast as possible. |
| INT rcCfmTransmitLbmTestPattern | 1.3.6.1.4.1.2272.1.69.17.1.20 | INTEGER | read-write | The test pattern to use in the LBM PDU with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a default value of allZero. value meaning -------- ------- allZero(1) Null signal without CRC-32 allZeroCrc(2) Null signal with CRC-32 pseudoRandomBitSequence(3) PRBS 1/2^31-1 without CRC-32 pseudoRandomBitSequenceCrc(4) PBRS 1/2^31-1 with CRC-32 |
| I32 rcCfmTransmitLbmDataSize | 1.3.6.1.4.1.2272.1.69.17.1.21 | Integer32 | read-write | An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent. |
| I32 rcCfmTransmitLbmFrameSize | 1.3.6.1.4.1.2272.1.69.17.1.22 | Integer32 | read-write | If the frame size is specified then the data size shall be internally calculated and the calculated data size shall be included in the data TLV. |
| INT rcCfmTransmitLbmSourceMode | 1.3.6.1.4.1.2272.1.69.17.1.23 | INTEGER | read-write | Source modes of the transmit loopback service. |
| rcCfmTransmitLtmTable | 1.3.6.1.4.1.2272.1.69.18 | not-accessible | Connectivity Fault Management transmit LTM table | |
| rcCfmTransmitLtmEntry | 1.3.6.1.4.1.2272.1.69.18.1 | not-accessible | Connectivity Fault Management Maintenance EndPoint LTM entry. | |
| I32 rcCfmTransmitLtmDomainIndex | 1.3.6.1.4.1.2272.1.69.18.1.1 | Integer32 | not-accessible | Maintenance Domain Name |
| I32 rcCfmTransmitLtmAssociationIndex | 1.3.6.1.4.1.2272.1.69.18.1.2 | Integer32 | not-accessible | Maintenance Association Name |
| I32 rcCfmTransmitLtmIndex | 1.3.6.1.4.1.2272.1.69.18.1.3 | Integer32 | not-accessible | Maintenance EndPoint Index |
| STR rcCfmTransmitLtmDomainName | 1.3.6.1.4.1.2272.1.69.18.1.4 | DisplayString | read-only | Maintenance Domain Name |
| STR rcCfmTransmitLtmAssociationName | 1.3.6.1.4.1.2272.1.69.18.1.5 | DisplayString | read-only | Maintenance Association Name |
| I32 rcCfmTransmitLtmVlanPriority | 1.3.6.1.4.1.2272.1.69.18.1.6 | Integer32 | read-write | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. |
| MAC rcCfmTransmitLtmDestMacAddress | 1.3.6.1.4.1.2272.1.69.18.1.7 | MacAddress | read-write | An indication of the target MAC Address Field to be transmitted, either: A unicast destination MAC address. |
| I32 rcCfmTransmitLtmDestMepId | 1.3.6.1.4.1.2272.1.69.18.1.8 | Integer32 | read-write | An indication of the target MAC Address Field to be transmitted, either: The Maintenance Assiciation End Point identifier of another MEP in the same Maintenance Association |
| T/F rcCfmTransmitLtmDestIsMepId | 1.3.6.1.4.1.2272.1.69.18.1.9 | TruthValue | read-write | True indicates that MepId of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission. |
| I32 rcCfmTransmitLtmTtl | 1.3.6.1.4.1.2272.1.69.18.1.10 | Integer32 | read-write | The number of hops remaining to this LTM. Decremented by 1 by each Bridge that handles the LTM. The decremented value is returned in the LTR. If 0 on output, the LTM is not transmitted to the next hop. The value of the TTL Field in the LTM transmitted by the originating MEP is controlled by a Managed Object; The default value if none is specified is 64. |
| I32 rcCfmTransmitLtmSeqNumber | 1.3.6.1.4.1.2272.1.69.18.1.11 | Integer32 | read-only | The transaction identifier/sequence number of the first loopback message (to be) sent. |
| T/F rcCfmTransmitLtmResultOk | 1.3.6.1.4.1.2272.1.69.18.1.12 | TruthValue | read-only | Indicates the result of the operation: -true. The Loopback Message(s) will be (or have been) sent. -false. The Loopback Message(s) will not be sent. |
| INT rcCfmTransmitLtmStatus | 1.3.6.1.4.1.2272.1.69.18.1.13 | INTEGER | read-write | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the Loopback messages. -abort. The service is aborted, or about to abort the LTM message This column will also be used to avoid concurrency or race condition problems that could occur if two or more management entities try to use the service at the same time. |
| STR rcCfmTransmitLtmResult | 1.3.6.1.4.1.2272.1.69.18.1.14 | DisplayString | read-only | Display the LTM result. |
| INT rcCfmTransmitLtmFlag | 1.3.6.1.4.1.2272.1.69.18.1.15 | INTEGER | read-only | LTM result flag indicating LTM status or error code. Each enum value represents a status or error case. 1 - No error 2 - Ltm Internal Error 3 - Unknown Remote Maintenance End Point 4 - Invalid Remote Maintenance End Point Mac Address 5 - Unset Remote Maintenance End Point Mac Address 6 - Mep must be enabled in order to perform LTM 7 - No Ltr response received 8 - Linktrace to own Mep MAC is not sent 9 - Endpoint must be enabled in order to perform LTM 10 - Pbt-trunk must be enabled in order to perform LTM 11 - LTM completed 12 - LTM leaf node |
| INT rcCfmTransmitLtmSourceMode | 1.3.6.1.4.1.2272.1.69.18.1.16 | INTEGER | read-write | Source modes of the transmit linktrace service. |
| rcCfmLtrReplyTable | 1.3.6.1.4.1.2272.1.69.33 | not-accessible | This table contains a list of Linktrace replies received by a specific MEP in response to a linktrace message. | |
| rcCfmLtrReplyEntry | 1.3.6.1.4.1.2272.1.69.33.1 | not-accessible | The Linktrace Reply table entry. | |
| I32 rcCfmLtrReplyDomainIndex | 1.3.6.1.4.1.2272.1.69.33.1.1 | Integer32 | not-accessible | Maintenance Domain Index |
| I32 rcCfmLtrReplyAssociationIndex | 1.3.6.1.4.1.2272.1.69.33.1.2 | Integer32 | not-accessible | Maintenance Association Index |
| I32 rcCfmLtrReplyMepId | 1.3.6.1.4.1.2272.1.69.33.1.3 | Integer32 | not-accessible | Maintenance EndPoint ID |
| I32 rcCfmLtrReplySeqNumber | 1.3.6.1.4.1.2272.1.69.33.1.4 | Integer32 | not-accessible | The transaction identifier/sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned. |
| I32 rcCfmLtrReplyHop | 1.3.6.1.4.1.2272.1.69.33.1.5 | Integer32 | not-accessible | The number of hops away from LTM initiator |
| I32 rcCfmLtrReplyReceiveOrder | 1.3.6.1.4.1.2272.1.69.33.1.6 | Integer32 | not-accessible | An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. This value is assigned sequentially from 1, in the order that the Linktrace Initiator received the LTRs. |
| I32 rcCfmLtrReplyTtl | 1.3.6.1.4.1.2272.1.69.33.1.7 | Integer32 | read-only | Ttl field value for a returned LTR. |
| STR rcCfmLtrReplyDomainName | 1.3.6.1.4.1.2272.1.69.33.1.8 | DisplayString | read-only | Maintenance Domain Name |
| STR rcCfmLtrReplyAssociationName | 1.3.6.1.4.1.2272.1.69.33.1.9 | DisplayString | read-only | Maintenance Association Name |
| T/F rcCfmLtrReplyForwarded | 1.3.6.1.4.1.2272.1.69.33.1.10 | TruthValue | read-only | Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field. |
| T/F rcCfmLtrReplyTerminalMep | 1.3.6.1.4.1.2272.1.69.33.1.11 | TruthValue | read-only | A boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field. |
| OCT rcCfmLtrReplyLastEgressIdentifier | 1.3.6.1.4.1.2272.1.69.33.1.12 | OCTET STRING | read-only | An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace Indicator that originated, or the Linktrace Responder that forwarded, the LTM to which this LTR is the response. This is the same value as the Egress Identifier TLV of that LTM. |
| OCT rcCfmLtrReplyNextEgressIdentifier | 1.3.6.1.4.1.2272.1.69.33.1.13 | OCTET STRING | read-only | An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Responder that transmitted this LTR, and can forward the LTM to the next hop. This is the same value as the Egress Identifier TLV of the forwarded LTM, if any. If the FwdYes bit of the Flags field is false, the contents of this field are undefined, and the field is ignored by the receiver. |
| CFM rcCfmLtrReplyRelayAction | 1.3.6.1.4.1.2272.1.69.33.1.14 | CfmRelayActionFieldValue | read-only | Value returned in the Relay Action field. |
| MAC rcCfmLtrReplySrcMac | 1.3.6.1.4.1.2272.1.69.33.1.15 | MacAddress | read-only | Mac address of the MP that respond to the LTM request for this LTR |
| CFM rcCfmLtrReplyIngressAction | 1.3.6.1.4.1.2272.1.69.33.1.16 | CfmIngressActionFieldValue | read-only | The value returned in the Ingress Action Field of the LTM. The value ingNoTlv(5) indicates that no Reply Ingress TLV was returned in the LTM. |
| MAC rcCfmLtrReplyIngressMac | 1.3.6.1.4.1.2272.1.69.33.1.17 | MacAddress | read-only | Mac address returned in the ingress MAC address field. If the rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless. |
| LLD rcCfmLtrReplyIngressPortIdSubtype | 1.3.6.1.4.1.2272.1.69.33.1.18 | LldpPortIdSubtype | read-only | Format of the Ingress Port ID. If the rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless. |
| LLD rcCfmLtrReplyIngressPortId | 1.3.6.1.4.1.2272.1.69.33.1.19 | LldpPortId | read-only | Ingress Port ID. The format of this object is determined by the value of the rcCfmLtrReplyIngressPortIdSubtype object. If the rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless. |
| CFM rcCfmLtrReplyEgressAction | 1.3.6.1.4.1.2272.1.69.33.1.20 | CfmEgressActionFieldValue | read-only | The value returned in the Egress Action Field of the LTM. The value egrNoTlv(5) indicates that no Reply Egress TLV was returned in the LTM. |
| MAC rcCfmLtrReplyEgressMac | 1.3.6.1.4.1.2272.1.69.33.1.21 | MacAddress | read-only | Mac address returned in the egress MAC address field. If the rcCfmLtrReplyEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless. |
| LLD rcCfmLtrReplyEgressPortIdSubtype | 1.3.6.1.4.1.2272.1.69.33.1.22 | LldpPortIdSubtype | read-only | Format of the Egress Port ID. If the rcCfmLtrReplyEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless. |
| LLD rcCfmLtrReplyEgressPortId | 1.3.6.1.4.1.2272.1.69.33.1.23 | LldpPortId | read-only | Egress Port ID. The format of this object is determined by the value of the rcCfmLtrReplyEgressPortIdSubtype object. If the rcCfmLtrReplyEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless. |
| rcCfmTransmitL2PingTable | 1.3.6.1.4.1.2272.1.69.34 | not-accessible | Connectivity Fault Management transmit L2Ping table | |
| rcCfmTransmitL2PingEntry | 1.3.6.1.4.1.2272.1.69.34.1 | not-accessible | Connectivity Fault Management Maintenance EndPoint L2Ping entry. | |
| I32 rcCfmTransmitL2PingVlanId | 1.3.6.1.4.1.2272.1.69.34.1.1 | Integer32 | not-accessible | A value that uniquely identifies the Customer Vlan |
| MAC rcCfmTransmitL2PingDestMacAddress | 1.3.6.1.4.1.2272.1.69.34.1.2 | MacAddress | read-write | An indication of the target MAC Address field to be transmitted |
| OCT rcCfmTransmitL2PingHostName | 1.3.6.1.4.1.2272.1.69.34.1.3 | OCTET STRING | read-write | The target host name |
| T/F rcCfmTransmitL2PingDestIsHostName | 1.3.6.1.4.1.2272.1.69.34.1.4 | TruthValue | read-write | True indicates that the host name is used for L2Ping transmission |
| I32 rcCfmTransmitL2PingMessages | 1.3.6.1.4.1.2272.1.69.34.1.5 | Integer32 | read-write | The number of L2Ping messages to be transmitted. |
| I32 rcCfmTransmitL2PingPriority | 1.3.6.1.4.1.2272.1.69.34.1.6 | Integer32 | read-write | Priority. 3 bit value to be used in the VLAN hdr, if present in the transmitted frame. |
| I32 rcCfmTransmitL2PingTimeoutInt | 1.3.6.1.4.1.2272.1.69.34.1.7 | Integer32 | read-write | The interval to wait for an L2Ping time-out with a range of (1..10) seconds with a default value of 3 seconds. |
| INT rcCfmTransmitL2PingTestPattern | 1.3.6.1.4.1.2272.1.69.34.1.8 | INTEGER | read-write | The test pattern to use in the L2Ping PDU with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a default value of allZero. value meaning -------- ------- allZero(1) Null signal without CRC-32 allZeroCrc(2) Null signal with CRC-32 pseudoRandomBitSequence(3) PRBS 1/2^31-1 without CRC-32 pseudoRandomBitSequenceCrc(4) PBRS 1/2^31-1 with CRC-32 |
| I32 rcCfmTransmitL2PingDataSize | 1.3.6.1.4.1.2272.1.69.34.1.9 | Integer32 | read-write | An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent. |
| I32 rcCfmTransmitL2PingFrameSize | 1.3.6.1.4.1.2272.1.69.34.1.10 | Integer32 | read-write | If the frame size is specified then the data size shall be internally calculated and the calculated data size shall be included in the data TLV. |
| INT rcCfmTransmitL2PingSourceMode | 1.3.6.1.4.1.2272.1.69.34.1.11 | INTEGER | read-write | Source modes of the transmit loopback service. |
| I32 rcCfmTransmitL2PingSeqNumber | 1.3.6.1.4.1.2272.1.69.34.1.12 | Integer32 | read-only | The transaction identifier/sequence number of the first loopback message (to be) sent. |
| T/F rcCfmTransmitL2PingResultOk | 1.3.6.1.4.1.2272.1.69.34.1.13 | TruthValue | read-only | Indicates the result of the operation: -true. The L2Ping Message(s) will be (or have been) sent. -false. The L2Ping Message(s) will not be sent. |
| INT rcCfmTransmitL2PingStatus | 1.3.6.1.4.1.2272.1.69.34.1.14 | INTEGER | read-write | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Ping messages. -abort The service is aborted or about to abort the L2Ping messages. This column will also be used to avoid concurrency or race condition problems that could occur if two or more management entities try to use the service at the same time. |
| STR rcCfmTransmitL2PingResult | 1.3.6.1.4.1.2272.1.69.34.1.15 | DisplayString | read-only | Display the L2Ping result. |
| rcCfmTransmitL2TraceTable | 1.3.6.1.4.1.2272.1.69.35 | not-accessible | Connectivity Fault Management transmit L2Trace table | |
| rcCfmTransmitL2TraceEntry | 1.3.6.1.4.1.2272.1.69.35.1 | not-accessible | Connectivity Fault Management Maintenance EndPoint L2Trace entry. | |
| I32 rcCfmTransmitL2TraceVlanId | 1.3.6.1.4.1.2272.1.69.35.1.1 | Integer32 | not-accessible | A value that uniquely identifies the Customer Vlan |
| I32 rcCfmTransmitL2TracePriority | 1.3.6.1.4.1.2272.1.69.35.1.2 | Integer32 | read-write | Priority. 3 bit value to be used in the VLAN hdr, if present in the transmitted frame. |
| MAC rcCfmTransmitL2TraceDestMacAddress | 1.3.6.1.4.1.2272.1.69.35.1.3 | MacAddress | read-write | An indication of the target MAC Address field to be transmitted |
| OCT rcCfmTransmitL2TraceHostName | 1.3.6.1.4.1.2272.1.69.35.1.4 | OCTET STRING | read-write | The target host name |
| I32 rcCfmTransmitL2TraceIsid | 1.3.6.1.4.1.2272.1.69.35.1.5 | Integer32 | read-write | Isid Id |
| STR rcCfmTransmitL2TraceNickName | 1.3.6.1.4.1.2272.1.69.35.1.6 | DisplayString | read-only | Local Node nick name |
| T/F rcCfmTransmitL2TraceDestIsHostName | 1.3.6.1.4.1.2272.1.69.35.1.7 | TruthValue | read-write | True indicates that the host name is used for L2Trace transmission |
| T/F rcCfmTransmitL2TraceIsidTree | 1.3.6.1.4.1.2272.1.69.35.1.8 | TruthValue | read-write | True indicates that the multicast tree will be traced. False indicates that the unicast path will be traced |
| I32 rcCfmTransmitL2TraceTtl | 1.3.6.1.4.1.2272.1.69.35.1.9 | Integer32 | read-write | The number of hops remaining to this L2Trace. Decremented by 1 by each Bridge that handles the L2Trace. The decremented value is returned in the L2Trace. If 0 on output, the L2Trace is not transmitted to the next hop. The value of the TTL Field in the L2Trace transmitted by the originating MEP is controlled by a Managed Object; The default value if none is specified is 64. |
| INT rcCfmTransmitL2TraceSourceMode | 1.3.6.1.4.1.2272.1.69.35.1.10 | INTEGER | read-write | Source modes of the transmit loopback service. |
| I32 rcCfmTransmitL2TraceSeqNumber | 1.3.6.1.4.1.2272.1.69.35.1.11 | Integer32 | read-only | The transaction identifier/sequence number of the first loopback message (to be) sent. |
| T/F rcCfmTransmitL2TraceResultOk | 1.3.6.1.4.1.2272.1.69.35.1.12 | TruthValue | read-only | Indicates the result of the operation: -true. The L2Trace Message(s) will be (or have been) sent. -false. The L2Trace Message(s) will not be sent. |
| INT rcCfmTransmitL2TraceStatus | 1.3.6.1.4.1.2272.1.69.35.1.13 | INTEGER | read-write | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Trace messages. -abort The service is aborted or about to abort the L2Trace messages. This column will also be used to avoid concurrency or race condition problems that could occur if two or more management entities try to use the service at the same time. |
| INT rcCfmTransmitL2TraceFlag | 1.3.6.1.4.1.2272.1.69.35.1.14 | INTEGER | read-only | L2Trace result flag indicating L2Trace status or error code. Each enum value represents a status or error case. 1 - No error 2 - L2Trace Internal Error 3 - Invalid Mac Address 4 - Mep must be enabled in order to perform L2Trace 5 - No L2Trace response received 6 - L2Trace to own Mep MAC is not sent 7 - L2Trace completed 8 - Lookup failure for L2Trace 9 - On a leaf node in the i-sid tree 10 - Not in the i-sid tree 11 - Requested SMLT Source from Non-Primary Node |
| rcCfmL2TraceReplyTable | 1.3.6.1.4.1.2272.1.69.36 | not-accessible | This table contains a list of l2trace replies received by a specific MEP in response to a linktrace message. | |
| rcCfmL2TraceReplyEntry | 1.3.6.1.4.1.2272.1.69.36.1 | not-accessible | The Linktrace Reply table entry. | |
| I32 rcCfmL2TraceReplyVlanId | 1.3.6.1.4.1.2272.1.69.36.1.1 | Integer32 | not-accessible | A value that uniquely identifies the Customer Vlan |
| I32 rcCfmL2TraceReplySeqNumber | 1.3.6.1.4.1.2272.1.69.36.1.2 | Integer32 | not-accessible | The transaction identifier/sequence number returned by a previous transmit linktrace message command, indicating which L2Trace's response is going to be returned. |
| I32 rcCfmL2TraceReplyHop | 1.3.6.1.4.1.2272.1.69.36.1.3 | Integer32 | not-accessible | The number of hops away from L2Trace initiator. |
| I32 rcCfmL2TraceReplyReceiveOrder | 1.3.6.1.4.1.2272.1.69.36.1.4 | Integer32 | not-accessible | An index to distinguish among multiple L2Trace responses with the same Transaction Identifier field value. This value is assigned sequentially from 1, in the order that the Linktrace Initiator received the responses. |
| I32 rcCfmL2TraceReplyTtl | 1.3.6.1.4.1.2272.1.69.36.1.5 | Integer32 | read-only | Ttl field value for a returned L2Trace response. |
| MAC rcCfmL2TraceReplySrcMac | 1.3.6.1.4.1.2272.1.69.36.1.6 | MacAddress | read-only | Mac address of the MP that respond to the L2Trace request for this L2traceReply |
| OCT rcCfmL2TraceReplyHostName | 1.3.6.1.4.1.2272.1.69.36.1.7 | OCTET STRING | read-only | The host name of the replying node |
| MAC rcCfmL2TraceReplyLastSrcMac | 1.3.6.1.4.1.2272.1.69.36.1.8 | MacAddress | read-only | The MAC address of the node that forwarded the L2Trace to the responding node |
| OCT rcCfmL2TraceReplyLastHostName | 1.3.6.1.4.1.2272.1.69.36.1.9 | OCTET STRING | read-only | The host name of the node that forwarded the L2Trace to the responding node |
| rcCfmTransmitL2IpPingTable | 1.3.6.1.4.1.2272.1.69.37 | not-accessible | Connectivity Fault Management transmit L2IpPing table | |
| rcCfmTransmitL2IpPingEntry | 1.3.6.1.4.1.2272.1.69.37.1 | not-accessible | L2IpPing entry. | |
| IPt rcCfmTransmitL2IpPingIpAddrType | 1.3.6.1.4.1.2272.1.69.37.1.1 | InetAddressType | not-accessible | The address type of destination IP Address |
| IP rcCfmTransmitL2IpPingIpAddr | 1.3.6.1.4.1.2272.1.69.37.1.2 | InetAddress | not-accessible | Destination IP Address. Support ipv4 at this time |
| I32 rcCfmTransmitL2IpPingVrfId | 1.3.6.1.4.1.2272.1.69.37.1.3 | Integer32 | read-only | VRF ID |
| STR rcCfmTransmitL2IpPingVrfName | 1.3.6.1.4.1.2272.1.69.37.1.4 | DisplayString | read-only | The Name of the Virtual Router |
| I32 rcCfmTransmitL2IpPingMessages | 1.3.6.1.4.1.2272.1.69.37.1.5 | Integer32 | read-create | The number of L2IpPing messages to be transmitted per mac/vlan pair. |
| I32 rcCfmTransmitL2IpPingTimeoutInt | 1.3.6.1.4.1.2272.1.69.37.1.6 | Integer32 | read-create | The interval to wait for an L2IpPing time-out with a range of (1..10) seconds with a default value of 3 seconds. |
| INT rcCfmTransmitL2IpPingTestPattern | 1.3.6.1.4.1.2272.1.69.37.1.7 | INTEGER | read-create | The test pattern to use in the L2IpPing PDUs with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a default value of allZero. value meaning -------- ------- allZero(1) Null signal without CRC-32 allZeroCrc(2) Null signal with CRC-32 pseudoRandomBitSequence(3) PRBS 1/2^31-1 without CRC-32 pseudoRandomBitSequenceCrc(4) PBRS 1/2^31-1 with CRC-32 |
| I32 rcCfmTransmitL2IpPingDataSize | 1.3.6.1.4.1.2272.1.69.37.1.8 | Integer32 | read-create | An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent. |
| INT rcCfmTransmitL2IpPingStatus | 1.3.6.1.4.1.2272.1.69.37.1.9 | INTEGER | read-create | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2IpPing messages. -abort The service is aborted or about to abort the L2IpPing messages. This column will also be used to avoid concurrency or race condition problems that could occur if two or more management entities try to use the service at the same time. |
| T/F rcCfmTransmitL2IpPingResultOk | 1.3.6.1.4.1.2272.1.69.37.1.10 | TruthValue | read-only | Indicates the result of the operation: -true. L2IpPing Message(s) will be/have been sent. -false. L2IpPing Message(s) will not be sent. |
| I32 rcCfmTransmitL2IpPingPathsFound | 1.3.6.1.4.1.2272.1.69.37.1.11 | Integer32 | read-only | The number of paths found to execute l2ping command |
| ROW rcCfmTransmitL2IpPingRowStatus | 1.3.6.1.4.1.2272.1.69.37.1.12 | RowStatus | read-create | Used to create/delete entries in the rcCfmTransmitL2IpPingTable. Deletion of an entry in this table results in corresponding rcCfmL2IpPingReplyTable entries being deleted. |
| rcCfmL2IpPingReplyTable | 1.3.6.1.4.1.2272.1.69.38 | not-accessible | This table contains a list of l2 ip ping replies received | |
| rcCfmL2IpPingReplyEntry | 1.3.6.1.4.1.2272.1.69.38.1 | not-accessible | The L2 Ip Ping Reply table entry. | |
| IPt rcCfmL2IpPingReplyIpAddrType | 1.3.6.1.4.1.2272.1.69.38.1.1 | InetAddressType | not-accessible | The address type of destination IP Address |
| IP rcCfmL2IpPingReplyIpAddr | 1.3.6.1.4.1.2272.1.69.38.1.2 | InetAddress | not-accessible | Destination IP Address. Support ipv4 at this time |
| I32 rcCfmL2IpPingReplySendOrder | 1.3.6.1.4.1.2272.1.69.38.1.3 | Integer32 | not-accessible | An index to distinguish among multiple L2Ping sessions This value is assigned sequentially from 1. It denotes order that sessions were sent. It correlates to the number of paths found and stored in the rcCfmTransmitL2IpPingEntry. |
| I32 rcCfmL2IpPingReplyVrfId | 1.3.6.1.4.1.2272.1.69.38.1.4 | Integer32 | read-only | VRF ID |
| I32 rcCfmL2IpPingReplyVlanId | 1.3.6.1.4.1.2272.1.69.38.1.5 | Integer32 | read-only | Vlan found from L3 lookup and used for transmission |
| MAC rcCfmL2IpPingReplyDestMacAddress | 1.3.6.1.4.1.2272.1.69.38.1.6 | MacAddress | read-only | An indication of the target MAC Address transmitted |
| NUM rcCfmL2IpPingReplyPortNum | 1.3.6.1.4.1.2272.1.69.38.1.7 | InterfaceIndex | read-only | Either the value '0', or the port number of the port used for the l2ping. |
| OCT rcCfmL2IpPingReplyDestHostName | 1.3.6.1.4.1.2272.1.69.38.1.8 | OCTET STRING | read-only | The host name of the responding node |
| I32 rcCfmL2IpPingReplySize | 1.3.6.1.4.1.2272.1.69.38.1.9 | Integer32 | read-only | The number of bytes of data sent |
| I32 rcCfmL2IpPingReplyPktsTx | 1.3.6.1.4.1.2272.1.69.38.1.10 | Integer32 | read-only | Number of Packets transmitted for this vlan/mac |
| I32 rcCfmL2IpPingReplyPktsRx | 1.3.6.1.4.1.2272.1.69.38.1.11 | Integer32 | read-only | Number of Packets received for this vlan/mac |
| I32 rcCfmL2IpPingReplyPercentLossWhole | 1.3.6.1.4.1.2272.1.69.38.1.12 | Integer32 | read-only | Percentage of packet loss for this vlan/mac |
| I32 rcCfmL2IpPingReplyPercentLossFract | 1.3.6.1.4.1.2272.1.69.38.1.13 | Integer32 | read-only | Percentage of packet loss for this vlan/mac |
| I32 rcCfmL2IpPingReplyMinRoundTrip | 1.3.6.1.4.1.2272.1.69.38.1.14 | Integer32 | read-only | Min time for round-trip for this vlan/mac in us |
| I32 rcCfmL2IpPingReplyMaxRoundTrip | 1.3.6.1.4.1.2272.1.69.38.1.15 | Integer32 | read-only | Max time for round-trip for this vlan/mac in us |
| I32 rcCfmL2IpPingReplyRttAvgWhole | 1.3.6.1.4.1.2272.1.69.38.1.16 | Integer32 | read-only | Average time for round-trip for this vlan/mac in us |
| I32 rcCfmL2IpPingReplyRttAvgFract | 1.3.6.1.4.1.2272.1.69.38.1.17 | Integer32 | read-only | Fractional portion of Average time for round-trip |
| INT rcCfmL2IpPingReplyFlag | 1.3.6.1.4.1.2272.1.69.38.1.18 | INTEGER | read-only | Result flag indicating status or error code. Each enum value represents a status or error case. 1 - No error 2 - Internal Error 3 - Invalid Ip 4 - L2Trace completed 5 - Lookup failure for IP (no vlan/mac entries) |
| rcCfmTransmitL2IpTraceTable | 1.3.6.1.4.1.2272.1.69.39 | not-accessible | Connectivity Fault Management transmit L2IpTrace table | |
| rcCfmTransmitL2IpTraceEntry | 1.3.6.1.4.1.2272.1.69.39.1 | not-accessible | L2IpTrace entry. | |
| IPt rcCfmTransmitL2IpTraceIpAddrType | 1.3.6.1.4.1.2272.1.69.39.1.1 | InetAddressType | not-accessible | The address type of destination IP Address |
| IP rcCfmTransmitL2IpTraceIpAddr | 1.3.6.1.4.1.2272.1.69.39.1.2 | InetAddress | not-accessible | Destination IP Address. Support ipv4 at this time |
| I32 rcCfmTransmitL2IpTraceVrfId | 1.3.6.1.4.1.2272.1.69.39.1.3 | Integer32 | read-only | VRF ID |
| STR rcCfmTransmitL2IpTraceVrfName | 1.3.6.1.4.1.2272.1.69.39.1.4 | DisplayString | read-only | The Name of the Virtual Router |
| I32 rcCfmTransmitL2IpTraceTtl | 1.3.6.1.4.1.2272.1.69.39.1.5 | Integer32 | read-create | The number of hops remaining to this L2Trace. Decremented by 1 by each Bridge that handles the L2Trace. The decremented value is returned in the L2Trace. If 0 on output, the L2Trace is not transmitted to the next hop. The value of the TTL Field in the L2Trace transmitted by the originating MEP is controlled by a Managed Object; The default value if none is specified is 64. |
| INT rcCfmTransmitL2IpTraceStatus | 1.3.6.1.4.1.2272.1.69.39.1.6 | INTEGER | read-create | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Trace messages. -abort The service is aborted or about to abort the L2Trace messages. This column will also be used to avoid concurrency or race condition problems that could occur if two or more management entities try to use the service at the same time. |
| T/F rcCfmTransmitL2IpTraceResultOk | 1.3.6.1.4.1.2272.1.69.39.1.7 | TruthValue | read-only | Indicates the result of the operation: -true. The Trace Message(s) will be/have been sent. -false. The Trace Message(s) will not be sent. |
| I32 rcCfmTransmitL2IpTracePathsFound | 1.3.6.1.4.1.2272.1.69.39.1.8 | Integer32 | read-only | The number of paths found to execute l2trace command |
| ROW rcCfmTransmitL2IpTraceRowStatus | 1.3.6.1.4.1.2272.1.69.39.1.9 | RowStatus | read-create | Used to create/delete entries in the rcCfmTransmitL2IpTraceTable. Deletion of an entry in this table results in corresponding rcCfmL2IpTraceReplyTable entries being deleted. |
| rcCfmL2IpTraceReplyTable | 1.3.6.1.4.1.2272.1.69.40 | not-accessible | This table contains a list of l2 ip trace replies received by a specific MEP in response to a linktrace message. | |
| rcCfmL2IpTraceReplyEntry | 1.3.6.1.4.1.2272.1.69.40.1 | not-accessible | The L2 Ip Trace Reply table entry. | |
| IPt rcCfmL2IpTraceReplyIpAddrType | 1.3.6.1.4.1.2272.1.69.40.1.1 | InetAddressType | not-accessible | The address type of destination IP Address |
| IP rcCfmL2IpTraceReplyIpAddr | 1.3.6.1.4.1.2272.1.69.40.1.2 | InetAddress | not-accessible | Destination IP Address. Support ipv4 at this time |
| I32 rcCfmL2IpTraceReplySendOrder | 1.3.6.1.4.1.2272.1.69.40.1.3 | Integer32 | not-accessible | An index to distinguish among multiple L2Trace sessions This value is assigned sequentially from 1. It denotes order that sessions were sent. It correlates to the number of paths found and stored in the rcCfmTransmitL2IpTraceEntry. |
| I32 rcCfmL2IpTraceReplyHop | 1.3.6.1.4.1.2272.1.69.40.1.4 | Integer32 | not-accessible | The number of L2 hops away from L2Trace initiator. |
| I32 rcCfmL2IpTraceReplyReceiveOrder | 1.3.6.1.4.1.2272.1.69.40.1.5 | Integer32 | not-accessible | An index to distinguish among multiple L2Trace responses with the same Send Transaction Identifier field value. This value is assigned sequentially from 1, in the order that the Linktrace Initiator received the responses. A zero value may be seen in error conditions |
| I32 rcCfmL2IpTraceReplyTtl | 1.3.6.1.4.1.2272.1.69.40.1.6 | Integer32 | read-only | Ttl field value for a returned L2Trace response. |
| I32 rcCfmL2IpTraceReplyVrfId | 1.3.6.1.4.1.2272.1.69.40.1.7 | Integer32 | read-only | VRF ID |
| I32 rcCfmL2IpTraceReplyVlanId | 1.3.6.1.4.1.2272.1.69.40.1.8 | Integer32 | read-only | Vlan found from L3 lookup and used for transmission |
| MAC rcCfmL2IpTraceReplyDestMacAddress | 1.3.6.1.4.1.2272.1.69.40.1.9 | MacAddress | read-only | An indication of the target MAC Address transmitted |
| I32 rcCfmL2IpTraceReplySeqNumber | 1.3.6.1.4.1.2272.1.69.40.1.10 | Integer32 | read-only | The transaction identifier/sequence number used in linktrace message packet |
| NUM rcCfmL2IpTraceReplyPortNum | 1.3.6.1.4.1.2272.1.69.40.1.11 | InterfaceIndex | read-only | Either the value '0', or the port number of the port used for the l2trace. |
| MAC rcCfmL2IpTraceReplySrcMac | 1.3.6.1.4.1.2272.1.69.40.1.12 | MacAddress | read-only | Mac address of the MP that responded to L2Trace request for this L2traceReply |
| OCT rcCfmL2IpTraceReplyHostName | 1.3.6.1.4.1.2272.1.69.40.1.13 | OCTET STRING | read-only | The host name of the replying node |
| MAC rcCfmL2IpTraceReplyLastSrcMac | 1.3.6.1.4.1.2272.1.69.40.1.14 | MacAddress | read-only | The MAC address of the node that forwarded the L2Trace to the responding node |
| OCT rcCfmL2IpTraceReplyLastHostName | 1.3.6.1.4.1.2272.1.69.40.1.15 | OCTET STRING | read-only | The host name of the node that forwarded the L2Trace to the responding node |
| INT rcCfmL2IpTraceReplyFlag | 1.3.6.1.4.1.2272.1.69.40.1.16 | INTEGER | read-only | L2Trace result flag indicating status or error code. Each enum value represents a status or error case. 1 - No error 2 - L2Trace Internal Error 3 - Invalid Mac Address 4 - Mep must be enabled in order to perform L2Trace 5 - No L2Trace response received 6 - L2Trace to own Mep MAC is not sent 7 - L2Trace completed 8 - Lookup failure for L2Trace |
| rcPlugOptMod | 1.3.6.1.4.1.2272.1.71 | |||
| rcPlugOptModTable | 1.3.6.1.4.1.2272.1.71.1 | not-accessible | Gibc SFF diagnostic info table | |
| rcPlugOptModEntry | 1.3.6.1.4.1.2272.1.71.1.1 | not-accessible | Entry containing info. for a particular port | |
| NUM rcPlugOptModPortIndex | 1.3.6.1.4.1.2272.1.71.1.1.1 | InterfaceIndex | not-accessible | An index value that uniquely identifies a port on a blade or line-card. |
| BIT rcPlugOptModDdmStatusMask | 1.3.6.1.4.1.2272.1.71.1.1.2 | Bits | read-only | Each bit other than ddm-ok represents a specific error. Any combination of error bits is allowed. |
| INT rcPlugOptModCalibration | 1.3.6.1.4.1.2272.1.71.1.1.3 | INTEGER | read-only | The identifier value indicates type of calibration. |
| INT rcPlugOptModPowerMeasure | 1.3.6.1.4.1.2272.1.71.1.1.4 | INTEGER | read-only | The identifier value indicates type of external power. |
| STR rcPlugOptModConnectorType | 1.3.6.1.4.1.2272.1.71.1.1.5 | DisplayString | read-only | The connector type is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces. This is an assigned name that indicates some characteristic of the layer-1 interface. |
| STR rcPlugOptModVendorName | 1.3.6.1.4.1.2272.1.71.1.1.6 | DisplayString | read-only | The vendor name is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces. The vendor name shall be the full name of the corporation, a commonly accepted abbreviation of the name, the SCSI company code, or the stock exchange code for the corporation. |
| STR rcPlugOptModVendorPartNumber | 1.3.6.1.4.1.2272.1.71.1.1.7 | DisplayString | read-only | The vendor part number is a 16 byte field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor part number or product name. |
| STR rcPlugOptModVendorRevNumber | 1.3.6.1.4.1.2272.1.71.1.1.8 | DisplayString | read-only | The vendor revision number is a 4-byte field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor product revision number. |
| STR rcPlugOptModVendorSN | 1.3.6.1.4.1.2272.1.71.1.1.9 | DisplayString | read-only | The vendor serial number is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor serial number for the transceiver. |
| STR rcPlugOptModVendorDateCode | 1.3.6.1.4.1.2272.1.71.1.1.10 | DisplayString | read-only | The date code is an 8-byte field that contains the vendor's date code in ASCII. This field is mandatory and takes the form: YYMMDDLC where YY is the 2 low order digits of the year (00=2000), MM is the month, 01 thru 12, DD is the day, 01 thru 31, and LC is an optional vendor specific lot code. |
| STR rcPlugOptModPEC | 1.3.6.1.4.1.2272.1.71.1.1.11 | DisplayString | read-only | This is a 16 byte left-justified ASCII field that records the Nortel Product Equipment Code order number for the module. Nortel part numbers are 9 bytes long, so the 10th through 16th byte should be NULL. |
| STR rcPlugOptModCLEI | 1.3.6.1.4.1.2272.1.71.1.1.12 | DisplayString | read-only | This is a 10 byte left-justified ASCII field that records the Nortel supplied Common Language Equipment Identifier code for the device. The CLEI code is a Telcordia human-readable representation of the 1D barcode. |
| T/F rcPlugOptModSupportsDDM | 1.3.6.1.4.1.2272.1.71.1.1.13 | TruthValue | read-only | This boolean indicates whether or not the device supports the DDM capability. |
| INT rcPlugOptModAux1Monitoring | 1.3.6.1.4.1.2272.1.71.1.1.14 | INTEGER | read-only | This value tells what Aux1 is measuring.The values are as follows: 0 Auxiliary monitoring not implemented 1 APD Bias Voltage mV (units of 10 mV) 2 Reserved 3 TEC Current (mA) 4 Laser Temperature 5 Laser Wavelength 6 +5V Supply Voltage 7 +3.3V Supply Voltage 8 +1.8V Supply Voltage 9 -5.2V Supply Voltage 10 +5.0V Supply Current (unit of 100 uA) 13 +3.3V Supply Current (unit of 100 uA) 14 +1.8V Supply Current (unit of 100 uA) 15 -5.2V Supply Current (unit of 100 uA) |
| INT rcPlugOptModAux2Monitoring | 1.3.6.1.4.1.2272.1.71.1.1.15 | INTEGER | read-only | This value tells you what AUX2 is measuring.The values are as follows: 0 Auxiliary monitoring not implemented 1 APD Bias Voltage mV (units of 10 mV) 2 Reserved 3 TEC Current (mA) 4 Laser Temperature 5 Laser Wavelength 6 +5V Supply Voltage 7 +3.3V Supply Voltage 8 +1.8V Supply Voltage 9 -5.2V Supply Voltage 10 +5.0V Supply Current (unit of 100 uA) 13 +3.3V Supply Current (unit of 100 uA) 14 +1.8V Supply Current (unit of 100 uA) 15 -5.2V Supply Current (unit of 100 uA) |
| I32 rcPlugOptModWaveLength | 1.3.6.1.4.1.2272.1.71.1.1.16 | Integer32 | read-only | Nominal transmitter output wavelength at room temperature. It is expressed in nano-meters. |
| I32 rcPlugOptModTemperature | 1.3.6.1.4.1.2272.1.71.1.1.17 | Integer32 | read-only | This value represents the internally measured module temperature. It is expressed in units of 1/256 of a degree Celsius and can range from -40C to +125C with 0.0001 accuracy.The most significant byte is the signed integer part of the number and the least significant byte is the fraction. |
| I32 rcPlugOptModTemperatureHighAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.18 | Integer32 | read-only | This value represents the vendor specified high temperature threshold. If the device temperature exceeds this value, a temperature high is asserted. It is expressed in the same units as the measured temperature. |
| I32 rcPlugOptModTemperatureLowAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.19 | Integer32 | read-only | This value represents the vendor specified low temperature threshold. If the device temperature falls below this value, a temperature low is asserted. It is expressed in the same units as the measured temperature. |
| I32 rcPlugOptModTemperatureHighWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.20 | Integer32 | read-only | This value represents the vendor specified high temperature warning threshold. If the device temperature exceeds this value, a temperature high warning is asserted. It is expressed in the same units as the measured temperature. |
| I32 rcPlugOptModTemperatureLowWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.21 | Integer32 | read-only | This value represents the vendor specified low temperature warning threshold. If the device temperature falls below this value, a temperature low warning is asserted. It is expressed in the same units as the measured temperature. |
| I32 rcPlugOptModVoltage | 1.3.6.1.4.1.2272.1.71.1.1.22 | Integer32 | read-only | This value represents the internally measured supply voltage. It is a positive number expressed in microvolts and can range from 0 to 65535 mV. |
| I32 rcPlugOptModVoltageHighAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.23 | Integer32 | read-only | This value represents the vendor specified high voltage threshold. If the measured voltage exceeds this value, a high voltage is asserted. It is a positive number expressed in microvolts. |
| I32 rcPlugOptModVoltageLowAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.24 | Integer32 | read-only | This value represents the vendor specified low voltage threshold. If the measured voltage falls below this value, a low voltage is asserted. It is a positive number expressed in microvolts. |
| I32 rcPlugOptModVoltageHighWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.25 | Integer32 | read-only | This value represents the vendor specified high voltage warning threshold. If the measured voltage exceeds this value, a high voltage warning is asserted. It is a positive number expressed in microvolts. |
| I32 rcPlugOptModVoltageLowWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.26 | Integer32 | read-only | This value represents the vendor specified low voltage warning threshold. If the measured voltage falls below this value, a low voltage warning is asserted. It is a positive number expressed in microvolts. |
| I32 rcPlugOptModBias | 1.3.6.1.4.1.2272.1.71.1.1.27 | Integer32 | read-only | This value represents the internally measured transmitter laser bias current. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy. |
| I32 rcPlugOptModBiasHighAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.28 | Integer32 | read-only | This value represents the vendor specified high current threshold. If the measured bias current exceeds this value, a high current alarm is asserted. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy. |
| I32 rcPlugOptModBiasLowAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.29 | Integer32 | read-only | This value represents the vendor specified low current threshold. If the measured bias current falls below this value, a low current is asserted. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy. |
| I32 rcPlugOptModBiasHighWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.30 | Integer32 | read-only | This value represents the vendor specified high current warning threshold. If the measured bias current exceeds this value, a high current warning is asserted. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy. |
| I32 rcPlugOptModBiasLowWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.31 | Integer32 | read-only | This value represents the vendor specified low current warning threshold. If the measured bias current falls below this value, a low current warning is asserted. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy. |
| I32 rcPlugOptModTxPower | 1.3.6.1.4.1.2272.1.71.1.1.32 | Integer32 | read-only | This value represents the internally measured coupled TX output power. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm). |
| I32 rcPlugOptModTxPowerHighAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.33 | Integer32 | read-only | This value represents the vendor specified high transmit power threshold. If the measured transmitter power exceeds this value, a transmitter power high is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm). |
| I32 rcPlugOptModTxPowerLowAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.34 | Integer32 | read-only | This value represents the vendor specified low transmit power threshold. If the measured transmitter power falls below this value, a transmitter power low is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm). |
| I32 rcPlugOptModTxPowerHighWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.35 | Integer32 | read-only | This value represents the vendor specified high transmit power warning threshold. If the measured transmitter power exceeds this value, a transmitter power high warning is asserted. It is a positive number expressed in units of units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm). |
| I32 rcPlugOptModTxPowerLowWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.36 | Integer32 | read-only | This value represents the vendor specified low transmit power warning threshold. If the measured transmitter power falls below this value, a transmitter power low warning is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm). |
| I32 rcPlugOptModRxPower | 1.3.6.1.4.1.2272.1.71.1.1.37 | Integer32 | read-only | This value represents the internally measured received power. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm). |
| I32 rcPlugOptModRxPowerHighAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.38 | Integer32 | read-only | This value represents the vendor specified high receiver power threshold. If the measured received power exceeds this value, a receiver power high is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm). |
| I32 rcPlugOptModRxPowerLowAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.39 | Integer32 | read-only | This value represents the vendor specified low receiver power threshold. If the measured received power falls below this value, a receiver power low is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm). |
| I32 rcPlugOptModRxPowerHighWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.40 | Integer32 | read-only | This value represents the vendor specified high receiver power warning threshold. If the measured received power exceeds this value, a receiver power high warning is asserted. It is a positive number expressed in units of units of micro watts and can range from 0 to 65.535 uW (-40 to 18.16 dBm). |
| I32 rcPlugOptModRxPowerLowWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.41 | Integer32 | read-only | This value represents the vendor specified low receiver power warning threshold. If the measured received power falls below this value, a receiver power low warning is asserted. It is a positive number expressed in units of units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm). |
| I32 rcPlugOptModAux1 | 1.3.6.1.4.1.2272.1.71.1.1.42 | Integer32 | read-only | This represents the internally measured A/D value specified. |
| I32 rcPlugOptModAux1HighAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.43 | Integer32 | read-only | This value represents the vendor specified high Aux1 threshold. |
| I32 rcPlugOptModAux1LowAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.44 | Integer32 | read-only | This value represents the vendor specified low Aux1 threshold. |
| I32 rcPlugOptModAux1HighWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.45 | Integer32 | read-only | This value represents the vendor specified high Aux1 warning threshold. |
| I32 rcPlugOptModAux1LowWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.46 | Integer32 | read-only | This value represents the vendor specified low Aux1 warning threshold. |
| I32 rcPlugOptModAux2 | 1.3.6.1.4.1.2272.1.71.1.1.47 | Integer32 | read-only | This represents the internally measured A/D value specified. |
| I32 rcPlugOptModAux2HighAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.48 | Integer32 | read-only | This value represents the vendor specified high Aux1 threshold. |
| I32 rcPlugOptModAux2LowAlarmThreshold | 1.3.6.1.4.1.2272.1.71.1.1.49 | Integer32 | read-only | This value represents the vendor specified low Aux1 threshold. |
| I32 rcPlugOptModAux2HighWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.50 | Integer32 | read-only | This value represents the vendor specified high Aux1 warning threshold. |
| I32 rcPlugOptModAux2LowWarningThreshold | 1.3.6.1.4.1.2272.1.71.1.1.51 | Integer32 | read-only | This value represents the vendor specified low Aux1 warning threshold. |
| INT rcPlugOptModTemperatureStatus | 1.3.6.1.4.1.2272.1.71.1.1.52 | INTEGER | read-only | Used to indicate the current temperature status |
| INT rcPlugOptModVoltageStatus | 1.3.6.1.4.1.2272.1.71.1.1.53 | INTEGER | read-only | Used to indicate the current voltage status |
| INT rcPlugOptModBiasStatus | 1.3.6.1.4.1.2272.1.71.1.1.54 | INTEGER | read-only | Used to indicate the current laser bias status |
| INT rcPlugOptModTxPowerStatus | 1.3.6.1.4.1.2272.1.71.1.1.55 | INTEGER | read-only | Used to indicate the current transmitter power status |
| INT rcPlugOptModRxPowerStatus | 1.3.6.1.4.1.2272.1.71.1.1.56 | INTEGER | read-only | Used to indicate the current receiver power status |
| INT rcPlugOptModAux1Status | 1.3.6.1.4.1.2272.1.71.1.1.57 | INTEGER | read-only | Used to indicate the current Aux1 status |
| INT rcPlugOptModAux2Status | 1.3.6.1.4.1.2272.1.71.1.1.58 | INTEGER | read-only | Used to indicate the current Aux2 status |
| rcPlugOptModScalars | 1.3.6.1.4.1.2272.1.71.2 | |||
| ENA rcPlugOptModDdmMonitor | 1.3.6.1.4.1.2272.1.71.2.1 | EnableValue | read-write | Enable/disable the global polling monitor for DDM |
| INT rcPlugOptModDdmMonitorInterval | 1.3.6.1.4.1.2272.1.71.2.2 | INTEGER | read-write | Indicate the interval in which the DDM alert registers is polled |
| ENA rcPlugOptModDdmTrapSend | 1.3.6.1.4.1.2272.1.71.2.3 | EnableValue | read-write | Enable/disable the global ddm trap send to SNMP manager |
| ENA rcPlugOptModDdmAlarmPortdown | 1.3.6.1.4.1.2272.1.71.2.4 | EnableValue | read-write | Enable/disable the global portdown option when ddm alarm occurs |
| rcVrrp | 1.3.6.1.4.1.2272.1.73 | |||
| rcVrrpMib | 1.3.6.1.4.1.2272.1.73.1 | |||
| rcVrrpObjects | 1.3.6.1.4.1.2272.1.73.1.1 | |||
| rcVrrpScalars | 1.3.6.1.4.1.2272.1.73.1.1.1 | |||
| T/F rcVrrpPingVirtualAddrEnable | 1.3.6.1.4.1.2272.1.73.1.1.1.1 | TruthValue | read-write | Used to configure whether this device should respond to pings directed to a virtual router's IP address. |
| INT rcVrrpTrapStateTransitionType | 1.3.6.1.4.1.2272.1.73.1.1.1.2 | INTEGER | read-only | Potential types of state transitions. Used by rcVrrpTrapStateTransition trap. |
| INT rcVrrpTrapStateTransitionCause | 1.3.6.1.4.1.2272.1.73.1.1.1.3 | INTEGER | read-only | Potential types of causes that will generate a rcVrrpTrapStateTransition trap. |
| rcVrrpOperTable | 1.3.6.1.4.1.2272.1.73.1.1.2 | not-accessible | Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'rcVrrpOperEntry' items. | |
| rcVrrpOperEntry | 1.3.6.1.4.1.2272.1.73.1.1.2.1 | not-accessible | An entry in the rcVrrpOperTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combination of the IF index and VRID. | |
| NUM rcVrrpOperIfIndex | 1.3.6.1.4.1.2272.1.73.1.1.2.1.1 | InterfaceIndexOrZero | not-accessible | port interface index. |
| VRI rcVrrpOperVrId | 1.3.6.1.4.1.2272.1.73.1.1.2.1.2 | VrId | read-only | This object contains the Virtual Router Identifier (VRID). |
| IP rcVrrpOperIpAddr | 1.3.6.1.4.1.2272.1.73.1.1.2.1.3 | IpAddress | read-write | The assigned IP addresses that a virtual router is responsible for backing up. |
| MAC rcVrrpOperVirtualMacAddr | 1.3.6.1.4.1.2272.1.73.1.1.2.1.4 | MacAddress | read-only | The virtual MAC address of the virtual router. This is derived as follows: 00-00-5E-00-01-. Where the first three octets consist of the IANA's OUI; The next two octets indicate the address block of the VRRP protocol; and the remaining octets consist of the VRID. Although this object can be derived from the 'rcVrrpOperVrId' object, it is included here, for completeness, so that it is easily obtainable by a management application and can be included in VRRP-related SNMP traps. |
| INT rcVrrpOperState | 1.3.6.1.4.1.2272.1.73.1.1.2.1.5 | INTEGER | read-only | The current state of the virtual router. |
| INT rcVrrpOperControl | 1.3.6.1.4.1.2272.1.73.1.1.2.1.6 | INTEGER | read-write | This object will enable/disable the virtual router function. Setting the value to 'enabled', will transition the state of the router from 'initialize to 'backup'; Setting the value to 'disabled', will tranisition the router from 'master' or 'backup' to 'initialize'. |
| I32 rcVrrpOperPriority | 1.3.6.1.4.1.2272.1.73.1.1.2.1.7 | Integer32 | read-write | This object specifies the priority for the virtual router (e.g., master election) with respect to other virtual routers that are backing up a one or more associated IP addresses. Higher values imply higher priority. A priority of '0', although not settable, is used to indicate that this router has ceased to particpate in VRRP and a backup virtual router should transition \ to become a new master. A priority of 255 is used for the router that owns the associated IP address(es). |
| I32 rcVrrpOperIpAddrCount | 1.3.6.1.4.1.2272.1.73.1.1.2.1.8 | Integer32 | read-only | The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond to a given IF index/VRID pair. |
| IP rcVrrpOperMasterIpAddr | 1.3.6.1.4.1.2272.1.73.1.1.2.1.9 | IpAddress | read-only | The master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this virtual router |
| INT rcVrrpOperAuthType | 1.3.6.1.4.1.2272.1.73.1.1.2.1.10 | INTEGER | read-write | Authentication type used for VRRP protocol exchanges between virtual routers. |
| OCT rcVrrpOperAuthKey | 1.3.6.1.4.1.2272.1.73.1.1.2.1.11 | OCTET STRING | read-write | The Authentication Key. If the virtual router's Authorization Type is 'simpleTextPassword', and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, rcVrrpOperAuthKey always returns an Octet String of length zero. |
| OCT rcVrrpOperHMACMD5Key | 1.3.6.1.4.1.2272.1.73.1.1.2.1.12 | OCTET STRING | read-write | The Authentication Key. If the virtual router's 'Authorization Type' is 'ipAuthenticationHeader', and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, rcVrrpOperHMACMD5Key always returns an Octet String of length zero. |
| I32 rcVrrpOperAdvertisementInterval | 1.3.6.1.4.1.2272.1.73.1.1.2.1.13 | Integer32 | read-write | This is the time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements. |
| INT rcVrrpOperPreemptMode | 1.3.6.1.4.1.2272.1.73.1.1.2.1.14 | INTEGER | read-write | Controls whether a higher priority virtual router will preempt a lower priority master. |
| TIK rcVrrpOperVirtualRouterUpTime | 1.3.6.1.4.1.2272.1.73.1.1.2.1.15 | TimeTicks | read-only | This is the time interval (in hundredths of a second) since this virtual router was initialized. |
| ROW rcVrrpOperRowStatus | 1.3.6.1.4.1.2272.1.73.1.1.2.1.16 | RowStatus | read-write | The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to 'createAndGo' results in enabling the VRRP protocol for this virtual router. The information required to actually create the conceptual row may be included in the SET primitive or may be initialized by the agent on the virtual router. Destroying the entry or setting it to 'notInService' disables VRRP on this virtual router. |
| IP rcVrrpOperCriticalIpAddr | 1.3.6.1.4.1.2272.1.73.1.1.2.1.17 | IpAddress | read-write | IP address of the interface that will cause a shutdown event. |
| INT rcVrrpOperHoldDownTimer | 1.3.6.1.4.1.2272.1.73.1.1.2.1.18 | INTEGER | read-write | Used to configure the amount of time (in seconds) to wait before preempting the current vrrp master. |
| INT rcVrrpOperHoldDownState | 1.3.6.1.4.1.2272.1.73.1.1.2.1.19 | INTEGER | read-only | Used to indicate the hold-down state of this vrrp interface. If the hold-down timer is operational this variable will be set to 'active'. 'dormant' otherwise. |
| INT rcVrrpOperHoldDownTimeRemaining | 1.3.6.1.4.1.2272.1.73.1.1.2.1.20 | INTEGER | read-only | Used to indicate the amount of time (in seconds) left before the rcVrrpOperHoldDownTimer will expire. |
| INT rcVrrpOperAction | 1.3.6.1.4.1.2272.1.73.1.1.2.1.21 | INTEGER | read-write | Used to trigger an action on this vrrp interface. |
| T/F rcVrrpOperCriticalIpAddrEnable | 1.3.6.1.4.1.2272.1.73.1.1.2.1.22 | TruthValue | read-write | Indicate if an user-defined critical IP address should be enabled. 'NO' = use the default IP address (0.0.0.0). No effect if an user-defined IP address does not exist. |
| INT rcVrrpOperBackUpMaster | 1.3.6.1.4.1.2272.1.73.1.1.2.1.23 | INTEGER | read-write | Enable the backup VRRP switch traffic forwarding. This will reduce the traffic in IST link in the time of SMLT. |
| INT rcVrrpOperBackUpMasterState | 1.3.6.1.4.1.2272.1.73.1.1.2.1.24 | INTEGER | read-only | Indicate whether backup VRRP switch traffic forwarding is enabled or not. |
| I32 rcVrrpOperFasterAdvInterval | 1.3.6.1.4.1.2272.1.73.1.1.2.1.25 | Integer32 | read-write | This is the faster advertisement interval, in milliseconds, between sending advertisement messages. When the faster advertisement interval enable is checked, the faster advertisement interval is being used instead of the regular advertisement interval |
| INT rcVrrpOperFasterAdvIntervalEnable | 1.3.6.1.4.1.2272.1.73.1.1.2.1.26 | INTEGER | read-write | Used to indicate if the Faster Advertisement Interval should be used. 'Disable' means use regular Advertisement interval. |
| rcVrrpRouterStatsTable | 1.3.6.1.4.1.2272.1.73.1.1.3 | not-accessible | Table of virtual router statistics. | |
| rcVrrpRouterStatsEntry | 1.3.6.1.4.1.2272.1.73.1.1.3.1 | not-accessible | An entry in the table, containing statistics information about a given virtual router. | |
| I32 rcVrrpStatsIfIndex | 1.3.6.1.4.1.2272.1.73.1.1.3.1.1 | Integer32 | read-only | port interface index. |
| VRI rcVrrpStatsVrId | 1.3.6.1.4.1.2272.1.73.1.1.3.1.2 | VrId | read-only | This object contains the Virtual Router Identifier (VRID). |
| C32 rcVrrpStatsBecomeMaster | 1.3.6.1.4.1.2272.1.73.1.1.3.1.3 | Counter32 | read-only | The total number of times that this virtual router's state has transitioned from BACKUP to MASTER. |
| C32 rcVrrpStatsAdvertiseRcvd | 1.3.6.1.4.1.2272.1.73.1.1.3.1.4 | Counter32 | read-only | The total number of VRRP advertisements received by this virtual router. |
| C32 rcVrrpStatsAdvertiseIntervalErrors | 1.3.6.1.4.1.2272.1.73.1.1.3.1.5 | Counter32 | read-only | The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router. |
| C32 rcVrrpStatsPasswdSecurityViolations | 1.3.6.1.4.1.2272.1.73.1.1.3.1.6 | Counter32 | read-only | The total number of VRRP packets received that do not pass the simple text password authentification check. |
| C32 rcVrrpStatsHmacSecurityViolations | 1.3.6.1.4.1.2272.1.73.1.1.3.1.7 | Counter32 | read-only | The total number of VRRP packets received that do not pass the HMAC-MD5-96 authentification check. |
| C32 rcVrrpStatsIpTtlErrors | 1.3.6.1.4.1.2272.1.73.1.1.3.1.8 | Counter32 | read-only | The total number of VRRP packets received by the virtual router with IP TTL (Time-To-Live) not equal to 255. |
| C32 rcVrrpStatsPriorityZeroPktsRcvd | 1.3.6.1.4.1.2272.1.73.1.1.3.1.9 | Counter32 | read-only | The total number of VRRP packets received by the virtual router with a priority of '0'. |
| C32 rcVrrpStatsPriorityZeroPktsSent | 1.3.6.1.4.1.2272.1.73.1.1.3.1.10 | Counter32 | read-only | The total number of VRRP packets sent by the virtual router with a priority of '0'. |
| C32 rcVrrpStatsInvalidTypePktsRcvd | 1.3.6.1.4.1.2272.1.73.1.1.3.1.11 | Counter32 | read-only | The number of VRRP packets received by the virtual router with an invalid value in the 'type' field. |
| C32 rcVrrpStatsAddressListErrors | 1.3.6.1.4.1.2272.1.73.1.1.3.1.12 | Counter32 | read-only | Packets received address list the address list does not match the locally configured list for the virtual router. |
| C32 rcVrrpStatsUnknownAuthType | 1.3.6.1.4.1.2272.1.73.1.1.3.1.13 | Counter32 | read-only | Packets received with an unknown authentication type. |
| C32 rcVrrpStatsAuthTypeErrors | 1.3.6.1.4.1.2272.1.73.1.1.3.1.14 | Counter32 | read-only | Packets received with 'Auth Type' not equal to the locally configured authentication method ('vrrpOperAuthType'). |
| rcVrrpNotifications | 1.3.6.1.4.1.2272.1.73.1.2 | |||
| NTF rcVrrpTrapStateTransition | 1.3.6.1.4.1.2272.1.73.1.2.1 | A rcVrrpTrapStateTransition trap signifies a state transition has occurred on a particular vrrp interface. Implementation of this trap is optional. | ||
| rcMpls | 1.3.6.1.4.1.2272.1.74 | |||
| rcMplsMib | 1.3.6.1.4.1.2272.1.74.1 | |||
| rcMplsNotifications | 1.3.6.1.4.1.2272.1.74.1.0 | |||
| rcMplsObjects | 1.3.6.1.4.1.2272.1.74.1.1 | |||
| rcMplsGlobalGroup | 1.3.6.1.4.1.2272.1.74.1.1.1 | |||
| rcMplsGlobalScalars | 1.3.6.1.4.1.2272.1.74.1.1.1.1 | |||
| IP rcMplsRouterId | 1.3.6.1.4.1.2272.1.74.1.1.1.1.1 | IpAddress | read-write | IP address of the circuitless interface to be used as router-id |
| ENA rcMplsLdpAdminStatus | 1.3.6.1.4.1.2272.1.74.1.1.1.1.2 | EnableValue | read-write | State of global LDP - enabled or disabled |
| INT rcMplsLdpPenultimateHopPop | 1.3.6.1.4.1.2272.1.74.1.1.1.1.3 | INTEGER | read-write | State of global LDP Penultimate Hop Popping. |
| U32 rcMplsLdpHelloHoldTimer | 1.3.6.1.4.1.2272.1.74.1.1.1.1.4 | Unsigned32 | read-write | The global Hello Hold Time in seconds. |
| U32 rcMplsLdpSessionKeepAlive | 1.3.6.1.4.1.2272.1.74.1.1.1.1.5 | Unsigned32 | read-write | The global Session Keep alive in seconds. |
| I32 rcMplsLdpPathVectorLimit | 1.3.6.1.4.1.2272.1.74.1.1.1.1.6 | Integer32 | read-write | The global path vector limit. |
| I32 rcMplsLdpHopCountLimit | 1.3.6.1.4.1.2272.1.74.1.1.1.1.7 | Integer32 | read-write | The global loop detect hop count limit. |
| ENA rcMplsLdpEgressPolicyStatus | 1.3.6.1.4.1.2272.1.74.1.1.1.1.8 | EnableValue | read-write | State of LDP Egress-policy enabled or disabled |
| ENA rcMplsRsvpAdminStatus | 1.3.6.1.4.1.2272.1.74.1.1.1.1.9 | EnableValue | read-write | State of global RSVP - enabled or disabled |
| INT rcMplsRsvpPenultimateHopPop | 1.3.6.1.4.1.2272.1.74.1.1.1.1.10 | INTEGER | read-write | State of global RSVP Penultimate Hop Popping. |
| U32 rcMplsRsvpHelloInterval | 1.3.6.1.4.1.2272.1.74.1.1.1.1.11 | Unsigned32 | read-write | The global RSVP hello interval. |
| ENA rcMplsRsvpRefreshReduction | 1.3.6.1.4.1.2272.1.74.1.1.1.1.12 | EnableValue | read-write | State of global RSVP refresh reduction - enabled or disabled |
| U32 rcMplsRsvpRefreshInterval | 1.3.6.1.4.1.2272.1.74.1.1.1.1.13 | Unsigned32 | read-write | The global value for RSVP refresh interval. |
| U32 rcMplsRsvpRefreshMultiplier | 1.3.6.1.4.1.2272.1.74.1.1.1.1.14 | Unsigned32 | read-write | The global value for RSVP refresh multiplier. |
| ENA rcMplsRsvpMessageBundling | 1.3.6.1.4.1.2272.1.74.1.1.1.1.15 | EnableValue | read-write | State of global RSVP message bundling - enabled or disabled |
| I32 rcMplsLspIngressStartLabel | 1.3.6.1.4.1.2272.1.74.1.1.1.1.16 | Integer32 | read-write | The global ingress rsp start label. |
| I32 rcMplsLspEgressStartLabel | 1.3.6.1.4.1.2272.1.74.1.1.1.1.17 | Integer32 | read-write | The global egress rsp start label. |
| T/F rcMplsLspIngressPktEnable | 1.3.6.1.4.1.2272.1.74.1.1.1.1.18 | TruthValue | read-write | Enable/Disable ingress rsp pkt lsp stats |
| T/F rcMplsLspEgressPktEnable | 1.3.6.1.4.1.2272.1.74.1.1.1.1.19 | TruthValue | read-write | Enable/Disable egress rsp pkt lsp stats |
| T/F rcMplsLdpClearStats | 1.3.6.1.4.1.2272.1.74.1.1.1.1.20 | TruthValue | read-write | Clear global LDP Statistics. |
| T/F rcMplsRsvpClearStats | 1.3.6.1.4.1.2272.1.74.1.1.1.1.21 | TruthValue | read-write | Clear global RSVP Statistics. |
| INT rcMplsLspClearStats | 1.3.6.1.4.1.2272.1.74.1.1.1.1.22 | INTEGER | read-write | Clear 'transmit' or 'receive' lsp statistics. |
| rcMplsIpStaticFecTable | 1.3.6.1.4.1.2272.1.74.1.1.1.2 | not-accessible | This is the table of ip-static fec mappings for both RSVP and LDP . | |
| rcMplsIpStaticFecEntry | 1.3.6.1.4.1.2272.1.74.1.1.1.2.1 | not-accessible | A static fec mapping to an rsvp lsp or ldp egress IP address. | |
| IP rcMplsIpStaticFecDest | 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.1 | IpAddress | not-accessible | The statically-configured destination IP address. |
| IP rcMplsIpStaticFecMask | 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.2 | IpAddress | not-accessible | The statically-configured destination IP mask. |
| STR rcMplsIpStaticFecTunnelName | 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.3 | DisplayString | read-create | The rsvp lsp tunnel name associated with rcMplsIpStaticFecTunnelId. This field will be null if the value of rcMplsIpStaticFecTunnelId is 0. |
| MPL rcMplsIpStaticFecTunnelId | 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.4 | MplsTunnelIndex | read-create | The rsvp lsp tunnel index (from mplsTunnelTable defined in rfc3812) if this is an rsvp Ip statically mapped address. This field will be 0 if this is an LDP Egress Address mapping. |
| IP rcMplsIpStaticFecEgressAddr | 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.5 | IpAddress | read-create | The LDP Egress IP Address. This field will be 0 if this is an rsvp tunnel fec mapping. |
| IP rcMplsIpStaticFecEgressMask | 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.6 | IpAddress | read-create | The LDP Egress IP Mask. This field will be 0 if this is an rsvp tunnel fec mapping. |
| INT rcMplsIpStaticFecState | 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.7 | INTEGER | read-only | Indicates the actual operational status of this static fec. |
| ROW rcMplsIpStaticFecRowStatus | 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.8 | RowStatus | read-create | This variable is used to create, modify, and/or delete a row in this table. |
| rcMplsIpFtnTable | 1.3.6.1.4.1.2272.1.74.1.1.1.3 | not-accessible | This is the table of mpls Ip FTN. | |
| rcMplsIpFtnEntry | 1.3.6.1.4.1.2272.1.74.1.1.1.3.1 | not-accessible | An mpls FTN entry . | |
| IP rcMplsIpFtnDest | 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.1 | IpAddress | not-accessible | The FTN destination IP address. |
| IP rcMplsIpFtnMask | 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.2 | IpAddress | not-accessible | The FTN destination IP mask. |
| INT rcMplsIpFtnType | 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.3 | INTEGER | read-only | The FTN next hop label type. |
| MPL rcMplsIpFtnOutLabel | 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.4 | MplsLabel | read-only | The FTN outgoing label. |
| NUM rcMplsIpFtnOutIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.5 | InterfaceIndex | read-only | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| IP rcMplsIpFtnNextHop | 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.6 | IpAddress | read-only | The FTN next hop Ip Address. |
| rcMplsIpIlmTable | 1.3.6.1.4.1.2272.1.74.1.1.1.4 | not-accessible | This is the table of mpls Incoming Label Mapping. | |
| rcMplsIpIlmEntry | 1.3.6.1.4.1.2272.1.74.1.1.1.4.1 | not-accessible | An mpls Incoming Label Map entry . | |
| MPL rcMplsIpIlmInLabel | 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.1 | MplsLabel | not-accessible | The Incoming Label. |
| NUM rcMplsIpIlmInIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.2 | InterfaceIndex | read-only | The index value which uniquely identifies the incoming interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| MPL rcMplsIpIlmOutLabel | 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.3 | MplsLabel | read-only | The Outgoing Label. |
| NUM rcMplsIpIlmOutIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.4 | InterfaceIndex | read-only | The index value which uniquely identifies the outgoing interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| IP rcMplsIpIlmNextHop | 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.5 | IpAddress | read-only | The next hop Ip Address. |
| rcMplsIngressLspStatTable | 1.3.6.1.4.1.2272.1.74.1.1.1.5 | not-accessible | This is the table of mpls Incoming Label Stats. | |
| rcMplsIngressLspStatEntry | 1.3.6.1.4.1.2272.1.74.1.1.1.5.1 | not-accessible | An mpls Incoming Label Stat entry . | |
| INT rcMplsIngressLspPort | 1.3.6.1.4.1.2272.1.74.1.1.1.5.1.1 | INTEGER | not-accessible | The incoming port for the lsp. |
| MPL rcMplsIngressLspLabel | 1.3.6.1.4.1.2272.1.74.1.1.1.5.1.2 | MplsLabel | not-accessible | The Incoming Lsp Label. |
| C64 rcMplsIngressLspPkts | 1.3.6.1.4.1.2272.1.74.1.1.1.5.1.3 | Counter64 | read-only | Count of incoming packets for the corresponding lsp and port. |
| rcMplsEgressLspStatTable | 1.3.6.1.4.1.2272.1.74.1.1.1.6 | not-accessible | This is the table of mpls OutGoing Label Stats. | |
| rcMplsEgressLspStatEntry | 1.3.6.1.4.1.2272.1.74.1.1.1.6.1 | not-accessible | An mpls OutGoing Label Stat entry . | |
| INT rcMplsEgressLspPort | 1.3.6.1.4.1.2272.1.74.1.1.1.6.1.1 | INTEGER | not-accessible | The OutGoing port for the lsp. |
| MPL rcMplsEgressLspLabel | 1.3.6.1.4.1.2272.1.74.1.1.1.6.1.2 | MplsLabel | not-accessible | The OutGoing Lsp Label. |
| C64 rcMplsEgressLspPkts | 1.3.6.1.4.1.2272.1.74.1.1.1.6.1.3 | Counter64 | read-only | Count of outgoing packets for the corresponding lsp and port. |
| rcMplsRsvpGroup | 1.3.6.1.4.1.2272.1.74.1.1.2 | |||
| rcMplsRsvpSummaryGroup | 1.3.6.1.4.1.2272.1.74.1.1.2.1 | |||
| U32 rcMplsRsvpSummaryVersion | 1.3.6.1.4.1.2272.1.74.1.1.2.1.1 | Unsigned32 | read-only | This is the RSVP version number. |
| ENA rcMplsRsvpSummaryState | 1.3.6.1.4.1.2272.1.74.1.1.2.1.2 | EnableValue | read-only | This is the RSVP protocol state. |
| U32 rcMplsRsvpSummaryLSPRetryTimer | 1.3.6.1.4.1.2272.1.74.1.1.2.1.3 | Unsigned32 | read-only | This is the retry timer (secs) for the LSPs starting from this node, in case of failure. A value of zero means no retry on LSPs. |
| U32 rcMplsRsvpSummaryLSPRetryLimit | 1.3.6.1.4.1.2272.1.74.1.1.2.1.4 | Unsigned32 | read-only | This is the retry limit for the LSPs starting from this node. It indicates how many times an LSP is retried before giving up. A value of zero means try infinitely. |
| U32 rcMplsRsvpSummaryLSPDecayRate | 1.3.6.1.4.1.2272.1.74.1.1.2.1.5 | Unsigned32 | read-only | This is the decay rate (percent) for LSPs starting on this node. |
| INT rcMplsRsvpSummaryPHP | 1.3.6.1.4.1.2272.1.74.1.1.2.1.6 | INTEGER | read-only | This is the configured RSVP PHP support on this node. Possible values are implicit-null, explicit-null, or disabled. |
| rcMplsRsvpTunnelExtTable | 1.3.6.1.4.1.2272.1.74.1.1.2.2 | not-accessible | This is the table of mpls rsvp tunnels. This table supplements the mplsTunnelTable from rfc3812. | |
| rcMplsRsvpTunnelExtEntry | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1 | not-accessible | An entry in the mpls tunnel table. | |
| MPL rcMplsRsvpTunnelExtIndex | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.1 | MplsTunnelIndex | not-accessible | The Tunnel Index. The value of this object should mimic the value of mplsTunnelIndex of the MplsTunnelEntry of the mpls tunnel for which this extended tunnel table entry row applies. |
| MPL rcMplsRsvpTunnelExtInstance | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.2 | MplsTunnelInstanceIndex | not-accessible | The Tunnel Instance. The value of this object should mimic the value of mplsTunnelInstance of the MplsTunnelEntry of the mpls tunnel for which this extended tunnel table entry row applies. |
| MPL rcMplsRsvpTunnelExtIngressLSRId | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.3 | MplsExtendedTunnelId | not-accessible | The Rsvp Tunnel Ingress LSR Id. The value of this object should mimic the value of the mplsTunnelIngressLSRId of the MplsTunnelEntry of the mpls tunnel for which this extended tunnel table entry row applies. |
| MPL rcMplsRsvpTunnelExtEgressLSRId | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.4 | MplsExtendedTunnelId | not-accessible | The Rsvp Tunnel Egress LSR Id. The value of this object should mimic the value of the mplsTunnelEgressLSRId of the MplsTunnelEntry of the mpls tunnel for which this extended tunnel table entry row applies. |
| STR rcMplsRsvpTunnelExtName | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.5 | SnmpAdminString | read-write | The Name of the tunnel associated with this LSP. |
| T/F rcMplsRsvpTunnelExtSwitchover | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.6 | TruthValue | read-write | Switch this LSP from active status to inactive status or vice versa. |
| T/F rcMplsRsvpTunnelExtActiveStatus | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.7 | TruthValue | read-only | This is 'true' if this is the active LSP of the tunnel. |
| STR rcMplsRsvpTunnelExtResStyle | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.8 | SnmpAdminString | read-only | This is the reservation style of the tunnel. |
| MPL rcMplsRsvpTunnelExtLspId | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.9 | MplsLSPID | read-only | This is the LSP Id of this LSP. |
| STR rcMplsRsvpTunnelExtERO | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.10 | SnmpAdminString | read-only | This is the Explicit Route associated with this LSP. |
| STR rcMplsRsvpTunnelExtRRO | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.11 | SnmpAdminString | read-only | This is the Recorded Route associated with this LSP. |
| NUM rcMplsRsvpTunnelExtInIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.12 | InterfaceIndex | read-only | This is the incoming interface for the LSP. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| MPL rcMplsRsvpTunnelExtInLabel | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.13 | MplsLabel | read-only | This is the incoming Mpls Label. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| IP rcMplsRsvpTunnelExtInNeighbor | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.14 | IpAddress | read-only | This address of the previous-hop (upstream) router. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| NUM rcMplsRsvpTunnelExtOutIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.15 | InterfaceIndex | read-only | This is the outgoing interface for the LSP. This applies to rows with mplsTunnelRole set to head(1) or transit(2). |
| MPL rcMplsRsvpTunnelExtOutLabel | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.16 | MplsLabel | read-only | This is the outgoing Mpls Label. This applies to rows with mplsTunnelRole set to head(1) or transit(2). |
| IP rcMplsRsvpTunnelExtOutNeighbor | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.17 | IpAddress | read-only | This address of the next-hop (downstream) router. This applies to rows with applies to rows with mplsTunnelRole set to head(1) or transit(2). |
| U32 rcMplsRsvpTunnelExtTSpecRate | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.18 | Unsigned32 | read-only | This is the primary LSP TSpec Rate. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| U32 rcMplsRsvpTunnelExtTSpecSize | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.19 | Unsigned32 | read-only | This is the primary LSP TSpec Size. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| U32 rcMplsRsvpTunnelExtTSpecPeak | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.20 | Unsigned32 | read-only | This is the primary LSP TSpec Peak. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| U32 rcMplsRsvpTunnelExtTSpecMin | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.21 | Unsigned32 | read-only | This is the primary LSP TSpec Min. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| U32 rcMplsRsvpTunnelExtTSpecMax | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.22 | Unsigned32 | read-only | This is the primary lsp TSpec Max. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| TIK rcMplsRsvpTunnelExtInstanceUpTime | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.23 | TimeTicks | read-only | This is the time (in 100ths of a second) that this instance has been in the Oper 'Up' state. When the instance transitions out of the Oper 'Up' state the time is reset to zero. |
| TIK rcMplsRsvpTunnelExtLSPUpTime | 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.24 | TimeTicks | read-only | This is the time (in 100ths of a second) that all instances of this LSP have been in the Oper Up state. The time is calculated based on the create time of the first instance of the LSP to go to the Oper 'Up' state. When all instances of this LSP have transitioned out of the Oper 'Up' state the time is reset to zero. |
| rcMplsRsvpNeighborTable | 1.3.6.1.4.1.2272.1.74.1.1.2.3 | not-accessible | This is the table of mpls rsvp neighbors. | |
| rcMplsRsvpNeighborEntry | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1 | not-accessible | An entry in the mpls rsvp tunnel table. | |
| IP rcMplsRsvpNeighborAddress | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.1 | IpAddress | not-accessible | This is the address of a learned neighbor. |
| STR rcMplsRsvpNeighborHelloState | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.2 | SnmpAdminString | read-only | This is the state of hello exchange with the neighbor. |
| NUM rcMplsRsvpNeighborIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.3 | InterfaceIndex | read-only | This is the interface index of the neighbor. |
| I32 rcMplsRsvpNeighborTime | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.4 | Integer32 | read-only | This is the time the neighbor was learned. |
| I32 rcMplsRsvpNeighborPeriod | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.5 | Integer32 | read-only | This is the RSVP Hello Interval. |
| I32 rcMplsRsvpNeighborSendCnt | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.6 | Integer32 | read-only | This is the number of Hello packets sent to the neighbor. |
| I32 rcMplsRsvpNeighborRcvCnt | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.7 | Integer32 | read-only | This is the number of Hellp packets received from the neighbor. |
| I32 rcMplsRsvpNeighborLocalInstance | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.8 | Integer32 | read-only | This is the identification sent to the remote router during Hello message exchange. |
| I32 rcMplsRsvpNeighborRemoteInstance | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.9 | Integer32 | read-only | This is the identification provided by the remote router during Hello message exchange. |
| I32 rcMplsRsvpNeighborCreationTime | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.10 | Integer32 | read-only | This is the time the neighbor instance was created. |
| I32 rcMplsRsvpNeighborLastPktRxTime | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.11 | Integer32 | read-only | This is the time that the last Hello message was received from the remote router. |
| STR rcMplsRsvpNeighborRefReduction | 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.12 | SnmpAdminString | read-only | This is the refresh-reduction status between the local router and the neighbor. |
| rcMplsRsvpInterfaceTable | 1.3.6.1.4.1.2272.1.74.1.1.2.4 | not-accessible | This is the table of mpls rsvp interfaces. | |
| rcMplsRsvpInterfaceEntry | 1.3.6.1.4.1.2272.1.74.1.1.2.4.1 | not-accessible | An entry in the mpls rsvp interface table. | |
| NUM rcMplsRsvpInterfaceIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.1 | InterfaceIndex | not-accessible | This is the interface index. |
| IP rcMplsRsvpInterfaceAddress | 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.2 | IpAddress | read-only | This is the address of the interface. |
| U32 rcMplsRsvpInterfaceRefreshInterval | 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.3 | Unsigned32 | read-only | This is the RSVP refresh interval for the interface(seconds). |
| U32 rcMplsRsvpInterfaceRefreshMult | 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.4 | Unsigned32 | read-only | This is the configured RSVP refresh multiplier for the interface(seconds). |
| U32 rcMplsRsvpInterfaceHelloInterval | 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.5 | Unsigned32 | read-only | This is the configured RSVP Hello Interval of the interface (seconds). |
| U32 rcMplsRsvpInterfaceRefreshReduction | 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.6 | Unsigned32 | read-only | This is the configured RSVP refresh reduction support on the interface. |
| U32 rcMplsRsvpInterfaceMessageBundling | 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.7 | Unsigned32 | read-only | This indicates state of message bundling on the interface. |
| rcMplsRsvpStatsTable | 1.3.6.1.4.1.2272.1.74.1.1.2.5 | not-accessible | This is the table of mpls rsvp statistics. | |
| rcMplsRsvpStatsEntry | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1 | not-accessible | An entry in the mpls rsvp statistics table. | |
| NUM rcMplsRsvpStatsIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.1 | InterfaceIndex | not-accessible | This is the interface index. This value can be 0 or a valid interface index. When 0 the global rsvp statistics are retrieved. |
| C32 rcMplsRsvpStatsPathRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.2 | Counter32 | read-only | This is the path received count. |
| C32 rcMplsRsvpStatsPathSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.3 | Counter32 | read-only | This is the path sent count. |
| C32 rcMplsRsvpStatsPathErrRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.4 | Counter32 | read-only | This is the path error receives count. |
| C32 rcMplsRsvpStatsPathErrSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.5 | Counter32 | read-only | This is the path error sent count. |
| C32 rcMplsRsvpStatsPathTearRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.6 | Counter32 | read-only | This is the path tear receives count. |
| C32 rcMplsRsvpStatsPathTearSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.7 | Counter32 | read-only | This is the path tear sent count. |
| C32 rcMplsRsvpStatsResvRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.8 | Counter32 | read-only | This is the reservation received count. |
| C32 rcMplsRsvpStatsResvSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.9 | Counter32 | read-only | This is the reservation sent count. |
| C32 rcMplsRsvpStatsResvErrRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.10 | Counter32 | read-only | This is the reservation error receives count. |
| C32 rcMplsRsvpStatsResvErrSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.11 | Counter32 | read-only | This is the reservation error sent count. |
| C32 rcMplsRsvpStatsResvTearRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.12 | Counter32 | read-only | This is the resv tear receives count. |
| C32 rcMplsRsvpStatsResvTearSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.13 | Counter32 | read-only | This is the resv tear sent count. |
| C32 rcMplsRsvpStatsConfTearRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.14 | Counter32 | read-only | This is the conf tear receives count. |
| C32 rcMplsRsvpStatsConfTearSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.15 | Counter32 | read-only | This is the conf tear sent count. |
| C32 rcMplsRsvpStatsAckRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.16 | Counter32 | read-only | This is the acks receives count. |
| C32 rcMplsRsvpStatsAckSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.17 | Counter32 | read-only | This is the acks sent count. |
| C32 rcMplsRsvpStatsSRefreshRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.18 | Counter32 | read-only | This is the summary refresh receives count. |
| C32 rcMplsRsvpStatsSRefreshSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.19 | Counter32 | read-only | This is the summary refresh sent count. |
| C32 rcMplsRsvpStatsHelloReqRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.20 | Counter32 | read-only | This is the hello request receives count. |
| C32 rcMplsRsvpStatsHelloReqSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.21 | Counter32 | read-only | This is the hello request sent count. |
| C32 rcMplsRsvpStatsHelloAckRcv | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.22 | Counter32 | read-only | This is the hello ack receives count. |
| C32 rcMplsRsvpStatsHelloAckSent | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.23 | Counter32 | read-only | This is the hello ack sent count. |
| C32 rcMplsRsvpStatsBadIpHdr | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.24 | Counter32 | read-only | This is the count of pkts with bad IP Header. |
| C32 rcMplsRsvpStatsBadVersion | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.25 | Counter32 | read-only | This is the count of pkts with Bad Version. |
| C32 rcMplsRsvpStatsBadRsvpLen | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.26 | Counter32 | read-only | This is the count of pkts with Bad Rsvp length. |
| C32 rcMplsRsvpStatsBadCksum | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.27 | Counter32 | read-only | This is the count of pkts with Bad Checksum. |
| C32 rcMplsRsvpStatsBadMsgType | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.28 | Counter32 | read-only | This is the count of pkts with Bad Message type. |
| C32 rcMplsRsvpStatsBadMsgForm | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.29 | Counter32 | read-only | This is the count of pkts with Bad Message Form. |
| C32 rcMplsRsvpStatsBadIntf | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.30 | Counter32 | read-only | This is the count of pkts received on a Bad Interface. |
| T/F rcMplsRsvpStatsClear | 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.31 | TruthValue | read-write | Clear RSVP Statistics for the interface. |
| rcMplsLdpGroup | 1.3.6.1.4.1.2272.1.74.1.1.3 | |||
| rcMplsLdpSummaryGroup | 1.3.6.1.4.1.2272.1.74.1.1.3.1 | |||
| U32 rcMplsLdpSummaryIntAdjCount | 1.3.6.1.4.1.2272.1.74.1.1.3.1.1 | Unsigned32 | read-only | This is the LDP summary index. |
| U32 rcMplsLdpSummaryExtAdjCount | 1.3.6.1.4.1.2272.1.74.1.1.3.1.2 | Unsigned32 | read-only | This is the LDP summary index. |
| U32 rcMplsLdpSummarySessionCount | 1.3.6.1.4.1.2272.1.74.1.1.3.1.3 | Unsigned32 | read-only | This is the LDP summary session count. |
| U32 rcMplsLdpSummaryRouteCount | 1.3.6.1.4.1.2272.1.74.1.1.3.1.4 | Unsigned32 | read-only | This is the LDP summary route count. |
| OID rcMplsLdpSummaryLdpId | 1.3.6.1.4.1.2272.1.74.1.1.3.1.5 | MplsLdpIdentifier | read-only | This is the LDP summary Local LDP Id. |
| U32 rcMplsLdpSummaryLspCount | 1.3.6.1.4.1.2272.1.74.1.1.3.1.6 | Unsigned32 | read-only | This is the LDP summary LSP count. |
| U32 rcMplsLdpSummaryInSegCount | 1.3.6.1.4.1.2272.1.74.1.1.3.1.7 | Unsigned32 | read-only | This is the LDP summary in segment count. |
| U32 rcMplsLdpSummaryOutSegCount | 1.3.6.1.4.1.2272.1.74.1.1.3.1.8 | Unsigned32 | read-only | This is the LDP summary out segment count. |
| ENA rcMplsLdpSummaryRedistConn | 1.3.6.1.4.1.2272.1.74.1.1.3.1.9 | EnableValue | read-only | This is the LDP policy redist enable flag. |
| rcMplsLdpDiscoveryTable | 1.3.6.1.4.1.2272.1.74.1.1.3.2 | not-accessible | This is the table of mpls ldp discoveries. | |
| rcMplsLdpDiscoveryEntry | 1.3.6.1.4.1.2272.1.74.1.1.3.2.1 | not-accessible | An entry in the mpls ldp discovery table. | |
| NUM rcMplsLdpDiscoveryIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.1 | InterfaceIndex | not-accessible | This is the interface index. |
| OID rcMplsLdpDiscoveryPeerLdpId | 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.2 | MplsLdpIdentifier | not-accessible | This is the peer ldp id. |
| IP rcMplsLdpDiscoveryPeerTransportAddr | 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.3 | IpAddress | read-only | This is the peer transport address to which an LDP session has been provisioned. |
| U32 rcMplsLdpDiscoveryNegotiatedHoldTime | 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.4 | Unsigned32 | read-only | This is the hold time negotiated between peers. |
| U32 rcMplsLdpDiscoveryConfSeqNum | 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.5 | Unsigned32 | read-only | This is the configured sequence number sent by the peer. |
| U32 rcMplsLdpDiscoveryExtendedDiscovery | 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.6 | Unsigned32 | read-only | If set to 1, extended discovery is enabled. If set to 0, basic discovery is enabled. |
| rcMplsLdpPathTable | 1.3.6.1.4.1.2272.1.74.1.1.3.3 | not-accessible | This is the table of mpls LDP Paths between a local peer and a remote peer . | |
| rcMplsLdpPathEntry | 1.3.6.1.4.1.2272.1.74.1.1.3.3.1 | not-accessible | An entry in the mpls ldp path table. | |
| INT rcMplsLdpPathType | 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.1 | INTEGER | not-accessible | This is the path type. ATG_NHR_LDP_FEC_TYPE_NONE 0 ATG_NHR_LDP_FEC_TYPE_HOST 1 ATG_NHR_LDP_FEC_TYPE_PREFIX 2 ATG_NHR_LDP_FEC_TYPE_VC 3 ATG_NHR_LDP_FEC_TYPE_VC_GEN_ID 4. |
| IPt rcMplsLdpPathAddrType | 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.2 | InetAddressType | not-accessible | This is the path address type. |
| ADR rcMplsLdpPathAddrPrefixLength | 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.3 | InetAddressPrefixLength | not-accessible | This is the path address prefix length. |
| IP rcMplsLdpPathAddr | 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.4 | InetAddress | not-accessible | This is the path address. |
| MPL rcMplsLdpPathInLabel | 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.5 | MplsLabel | read-only | This is the path address prefix length. |
| rcMplsLdpPathRemotePeerTable | 1.3.6.1.4.1.2272.1.74.1.1.3.4 | not-accessible | This is the table of LDP paths to a given remote peer. | |
| rcMplsLdpPathRemotePeerEntry | 1.3.6.1.4.1.2272.1.74.1.1.3.4.1 | not-accessible | An entry in the mpls ldp path remote peer table. | |
| INT rcMplsLdpPathRemotePeerType | 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.1 | INTEGER | not-accessible | This is the path type. ATG_NHR_LDP_FEC_TYPE_NONE 0 ATG_NHR_LDP_FEC_TYPE_HOST 1 ATG_NHR_LDP_FEC_TYPE_PREFIX 2 ATG_NHR_LDP_FEC_TYPE_VC 3 ATG_NHR_LDP_FEC_TYPE_VC_GEN_ID 4. |
| IPt rcMplsLdpPathRemotePeerAddrType | 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.2 | InetAddressType | not-accessible | This is the type of the path address. |
| ADR rcMplsLdpPathRemotePeerAddrPrefixLength | 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.3 | InetAddressPrefixLength | not-accessible | This is the path address prefix length. |
| IP rcMplsLdpPathRemotePeerAddr | 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.4 | InetAddress | not-accessible | This is the path address. |
| INT rcMplsLdpPathRemotePeerId | 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.5 | INTEGER | not-accessible | This is the Id of the remote peer of the path. |
| OID rcMplsLdpPathRemotePeerLdpId | 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.6 | MplsLdpIdentifier | read-only | This is the LDP Id of the remote peer of the path. |
| MPL rcMplsLdpPathRemotePeerOutLabel | 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.7 | MplsLabel | read-only | This is the Out Label for this instance of the Remote Peer Id. |
| INT rcMplsLdpPathRemotePeerState | 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.8 | INTEGER | read-only | This is the state of the remote peer. |
| rcMplsLdpRouteTable | 1.3.6.1.4.1.2272.1.74.1.1.3.5 | not-accessible | This is the table of mpls ldp routes. | |
| rcMplsLdpRouteEntry | 1.3.6.1.4.1.2272.1.74.1.1.3.5.1 | not-accessible | An entry in the mpls ldp route table. | |
| INT rcMplsLdpRouteType | 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.1 | INTEGER | not-accessible | This is the route type. ATG_NHR_LDP_FEC_TYPE_NONE 0 ATG_NHR_LDP_FEC_TYPE_HOST 1 ATG_NHR_LDP_FEC_TYPE_PREFIX 2 ATG_NHR_LDP_FEC_TYPE_VC 3 ATG_NHR_LDP_FEC_TYPE_VC_GEN_ID 4. |
| IPt rcMplsLdpRouteAddrType | 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.2 | InetAddressType | not-accessible | This is the route address prefix length. |
| ADR rcMplsLdpRouteAddrPrefixLength | 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.3 | InetAddressPrefixLength | not-accessible | This is the route address prefix length. |
| IP rcMplsLdpRouteAddr | 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.4 | InetAddress | not-accessible | This is the route address. |
| NUM rcMplsLdpRouteIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.5 | InterfaceIndex | read-only | This is the interface index of the route entry. |
| IPt rcMplsLdpRouteNextHopAddrType | 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.6 | InetAddressType | read-only | This is the address type of the next hop. |
| IP rcMplsLdpRouteNextHopAddr | 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.7 | InetAddress | read-only | This is the address of the next hop. |
| rcMplsLdpSessionTable | 1.3.6.1.4.1.2272.1.74.1.1.3.6 | not-accessible | This is the table of mpls ldp sessions. | |
| rcMplsLdpSessionEntry | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1 | not-accessible | An entry in the mpls ldp session table. | |
| OID rcMplsLdpSessionEntityLdpId | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.1 | MplsLdpIdentifier | not-accessible | This is the entity LDP ID for the session. |
| NUM rcMplsLdpSessionEntityIndex | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.2 | IndexInteger | not-accessible | This is the entity LDP ID for the session. |
| OID rcMplsLdpSessionPeerLdpId | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.3 | MplsLdpIdentifier | not-accessible | This is the peer LDP ID for the session. |
| U32 rcMplsLdpSessionStateLastChange | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.4 | Unsigned32 | read-only | The time this Session entered its current state as denoted by the rcMplsLdpSessionState object. |
| INT rcMplsLdpSessionState | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.5 | INTEGER | read-only | The current state of the session, all of the states 1 to 5 are based on the state machine for session negotiation behavior 1- nonexistent, 2- initialized, 3- openrec, 4- opensent, 5- operational. |
| INT rcMplsLdpSessionRole | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.6 | INTEGER | read-only | During session establishment the LSR/LER takes either the active role or the passive role based on address comparisons. This object indicates whether this LSR/LER was behaving in an active role or passive role during this session's establishment, 1- unknown, 2- active, 3- passive. The value of unknown(1), indicates that the role is not able to be determined at the present time. |
| U32 rcMplsLdpSessionProtocolVersion | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.7 | Unsigned32 | read-only | This is the protocol version. |
| I32 rcMplsLdpSessionKeepAliveHoldTimeRem | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.8 | Integer32 | read-only | This is the session keep alive hold time remaining. |
| U32 rcMplsLdpSessionKeepAliveTime | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.9 | Unsigned32 | read-only | This is the session keep alive time. |
| U32 rcMplsLdpSessionMaxPduLength | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.10 | Unsigned32 | read-only | This is the session's max pdu length. |
| I32 rcMplsLdpSessionDiscontinuityTime | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.11 | Integer32 | read-only | This is the session's discontinuity time. |
| U32 rcMplsLdpSessionHoldTime | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.12 | Unsigned32 | read-only | This is the session's hold time. |
| I32 rcMplsLdpSessionUpTime | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.13 | Integer32 | read-only | This is the session's up time. |
| C32 rcMplsLdpSessionMessagesSent | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.14 | Counter32 | read-only | This is the session total messages sent. |
| C32 rcMplsLdpSessionMessagesRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.15 | Counter32 | read-only | This is the session total messages received. |
| rcMplsLdpInterfaceTable | 1.3.6.1.4.1.2272.1.74.1.1.3.7 | not-accessible | This is the table of mpls ldp interface. | |
| rcMplsLdpInterfaceEntry | 1.3.6.1.4.1.2272.1.74.1.1.3.7.1 | not-accessible | An entry in the mpls ldp interface table. | |
| NUM rcMplsLdpInterfaceIfIndex | 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.1 | InterfaceIndex | not-accessible | This is the LDP interface if index. |
| U32 rcMplsLdpInterfaceNbrCount | 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.2 | Unsigned32 | read-only | This is the number of neighbors. |
| U32 rcMplsLdpInterfaceNextHello | 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.3 | Unsigned32 | read-only | This is the next hello time. |
| U32 rcMplsLdpInterfaceConfHoldTime | 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.4 | Unsigned32 | read-only | This is the configured hello hold time. |
| U32 rcMplsLdpInterfaceNegHoldTime | 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.5 | Unsigned32 | read-only | This is the negotiated hello hold time. |
| U32 rcMplsLdpInterfaceHelloInterval | 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.6 | Unsigned32 | read-only | This is one third of the negotiated hello hold time. |
| rcMplsLdpStatsTable | 1.3.6.1.4.1.2272.1.74.1.1.3.8 | not-accessible | This is the table of mpls ldp statistics. | |
| rcMplsLdpStatsEntry | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1 | not-accessible | An entry in the mpls ldp statistics table. | |
| IP rcMplsLdpStatsPeerAddress | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.1 | IpAddress | not-accessible | This is the LDP Peer Address key for search. This value can be a valid peer address or 0.0.0.0. If 0.0.0.0 then global LDP statistics are retrieved. |
| C32 rcMplsLdpStatsNotifyRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.2 | Counter32 | read-only | This is the count of notifications received. |
| C32 rcMplsLdpStatsNotifySent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.3 | Counter32 | read-only | This is the count of notifications sent. |
| C32 rcMplsLdpStatsHelloRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.4 | Counter32 | read-only | This is the count of hellos received. |
| C32 rcMplsLdpStatsHelloSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.5 | Counter32 | read-only | This is the count of hellos sent. |
| C32 rcMplsLdpStatsInitRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.6 | Counter32 | read-only | This is the count of initializations received. |
| C32 rcMplsLdpStatsInitSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.7 | Counter32 | read-only | This is the count of initializations sent. |
| C32 rcMplsLdpStatsKeepRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.8 | Counter32 | read-only | This is the count of keep alives received. |
| C32 rcMplsLdpStatsKeepSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.9 | Counter32 | read-only | This is the count of keep alives sent. |
| C32 rcMplsLdpStatsAddrRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.10 | Counter32 | read-only | This is the count of addrs received. |
| C32 rcMplsLdpStatsAddrSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.11 | Counter32 | read-only | This is the count of addrs sent. |
| C32 rcMplsLdpStatsAddrWdrRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.12 | Counter32 | read-only | This is the count of addr withdraws received. |
| C32 rcMplsLdpStatsAddrWdrSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.13 | Counter32 | read-only | This is the count of addr withdraws sent. |
| C32 rcMplsLdpStatsLabelMapRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.14 | Counter32 | read-only | This is the count of label maps received. |
| C32 rcMplsLdpStatsLabelMapSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.15 | Counter32 | read-only | This is the count of label maps sent. |
| C32 rcMplsLdpStatsLabelReqRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.16 | Counter32 | read-only | This is the count of label reqs received. |
| C32 rcMplsLdpStatsLabelReqSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.17 | Counter32 | read-only | This is the count of label reqs sent. |
| C32 rcMplsLdpStatsLabelWdrRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.18 | Counter32 | read-only | This is the count of label withdraws received. |
| C32 rcMplsLdpStatsLabelWdrSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.19 | Counter32 | read-only | This is the count of label withdraws sent. |
| C32 rcMplsLdpStatsLabelRelRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.20 | Counter32 | read-only | This is the count of label withdraws received. |
| C32 rcMplsLdpStatsLabelRelSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.21 | Counter32 | read-only | This is the count of label withdraws sent. |
| C32 rcMplsLdpStatsLabelAbrRecv | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.22 | Counter32 | read-only | This is the count of label aborts received. |
| C32 rcMplsLdpStatsLabelAbrSent | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.23 | Counter32 | read-only | This is the count of label aborts sent. |
| C32 rcMplsLdpStatsSessionUp | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.24 | Counter32 | read-only | This is the count of session up. |
| C32 rcMplsLdpStatsSessionDown | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.25 | Counter32 | read-only | This is the count of session down. |
| C32 rcMplsLdpStatsBadLdpIdentifierErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.26 | Counter32 | read-only | This is the count of bad LDP ID errors. |
| C32 rcMplsLdpStatsBadPduLengthErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.27 | Counter32 | read-only | This is the count of Bad PDU length errors. |
| C32 rcMplsLdpStatsBadMessageLengthErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.28 | Counter32 | read-only | This is the count of bad message length errors. |
| C32 rcMplsLdpStatsUnknownMessageErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.29 | Counter32 | read-only | This is the count of unknown message errors. |
| C32 rcMplsLdpStatsUnknownTlvErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.30 | Counter32 | read-only | This is the count of unknown TLV errors. |
| C32 rcMplsLdpStatsBadTlvLengthErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.31 | Counter32 | read-only | This is the count of bad TLV Length errors. |
| C32 rcMplsLdpStatsMalformedTlvValueErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.32 | Counter32 | read-only | This is the count of Malinformed TLV value errors. |
| C32 rcMplsLdpStatsHoldTimerExpErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.33 | Counter32 | read-only | This is the count of hold time expired errors. |
| C32 rcMplsLdpStatsSessionRejectedNoHelloErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.34 | Counter32 | read-only | This is the count of session reject - no hello errors. |
| C32 rcMplsLdpStatsSessionRejectedBadParmAdvErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.35 | Counter32 | read-only | This is the count of session reject - bad parameter advertisement errors. |
| C32 rcMplsLdpStatsSessionRejectedMaxPduErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.36 | Counter32 | read-only | This is the count of session reject - Max PDU Errors. |
| C32 rcMplsLdpStatsSessionRejectedBadLabelRangeErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.37 | Counter32 | read-only | This is the count of session reject - Bad Label Range errors. |
| C32 rcMplsLdpStatsSessionRejectedSetupAbortErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.38 | Counter32 | read-only | This is the count of session reject - Setup Abort errors. |
| C32 rcMplsLdpStatsSessionRejectedBadKeepaliveErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.39 | Counter32 | read-only | This is the count of session reject - Bad Keepalive Errors. |
| C32 rcMplsLdpStatsSessionOtherErrors | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.40 | Counter32 | read-only | This is the count of other errors. |
| T/F rcMplsLdpStatsClear | 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.41 | TruthValue | read-write | Clear LDP Statistics for the Peer. |
| rcMplsNotificationObjects | 1.3.6.1.4.1.2272.1.74.1.2 | |||
| T/F rcMplsLdpStatusNotificationEnable | 1.3.6.1.4.1.2272.1.74.1.2.1 | TruthValue | read-write | If this object is true, then it enables the generation of LDP Session Up or Down Traps, otherwise these traps are not emitted. |
| T/F rcMplsLdpSessionThresholdNotificationEnable | 1.3.6.1.4.1.2272.1.74.1.2.2 | TruthValue | read-write | If this object is true, then it enables the generation of LDP Session Threshold Exceeded Traps, otherwise these traps are not emitted. |
| T/F rcMplsLdpPathVectorLimitNotificationEnable | 1.3.6.1.4.1.2272.1.74.1.2.3 | TruthValue | read-write | If this object is true, then it enables the generation of LDP Path Vector Limit Exceeded Traps, otherwise these traps are not emitted. |
| rcIpMRoute | 1.3.6.1.4.1.2272.1.76 | |||
| rcIpMRouteMIBObjects | 1.3.6.1.4.1.2272.1.76.1 | |||
| rcIpMRouteScalars | 1.3.6.1.4.1.2272.1.76.1.1 | |||
| T/F rcIpMRouteStatsEnabled | 1.3.6.1.4.1.2272.1.76.1.1.2 | TruthValue | read-write | The enabled status of IP Multicast statistics. |
| T/F rcIpMRouteStatsClear | 1.3.6.1.4.1.2272.1.76.1.1.3 | TruthValue | read-write | Clear ip mroute stats. |
| rcIpMRouteStatsTable | 1.3.6.1.4.1.2272.1.76.1.6 | not-accessible | the table containing IP Multicast statistics. | |
| rcIpMRouteStatsEntry | 1.3.6.1.4.1.2272.1.76.1.6.1 | not-accessible | An entry containing the ip multicast statistics information for the specific group ip address. | |
| IP rcIpMRouteStatsGroupAddress | 1.3.6.1.4.1.2272.1.76.1.6.1.1 | IpAddress | not-accessible | the IP multicast group address for which this entry contains ip multicast statistics. |
| C32 rcIpMRouteStatsSourceCount | 1.3.6.1.4.1.2272.1.76.1.6.1.2 | Counter32 | read-only | The number of sources corresponding to the specific group and vrf. |
| C64 rcIpMRouteStatsPkts | 1.3.6.1.4.1.2272.1.76.1.6.1.3 | Counter64 | read-only | The total number of frames that are processed corresponding to the specific group and vrf. |
| C64 rcIpMRouteStatsBytes | 1.3.6.1.4.1.2272.1.76.1.6.1.4 | Counter64 | read-only | The total number of bytes that are processed corresponding to the specific group and vrf. |
| I32 rcIpMRouteStatsAverageSizePerPkt | 1.3.6.1.4.1.2272.1.76.1.6.1.5 | Integer32 | read-only | The average length of packets that are processed corresponding to the specific group and vrf. |
| C64 rcIpMRouteStatsDropPkts | 1.3.6.1.4.1.2272.1.76.1.6.1.6 | Counter64 | read-only | The total number of drop frames that are processed corresponding to the specific group and vrf. |
| C64 rcIpMRouteStatsDropBytes | 1.3.6.1.4.1.2272.1.76.1.6.1.7 | Counter64 | read-only | The total number of drop bytes that are processed corresponding to the specific group and vrf. |
| I32 rcIpMRouteStatsPktsPerSecond | 1.3.6.1.4.1.2272.1.76.1.6.1.8 | Integer32 | read-only | The number of packets that are processed corresponding to the specific group and vrf in one second. |
| rcPlsb | 1.3.6.1.4.1.2272.1.78 | |||
| rcPlsbGlobal | 1.3.6.1.4.1.2272.1.78.1 | |||
| OCT rcPlsbGlobalVlans | 1.3.6.1.4.1.2272.1.78.1.1 | OCTET STRING | read-write | PLSB vlan entry. |
| ENA rcPlsbGlobalEnable | 1.3.6.1.4.1.2272.1.78.1.2 | EnableValue | read-write | Enable/Disable PLSB global flag. |
| INT rcPlsbGlobalMsti | 1.3.6.1.4.1.2272.1.78.1.3 | INTEGER | read-write | MSTI instance ID for PLSB VLANS |
| I32 rcPlsbGlobalEtherType | 1.3.6.1.4.1.2272.1.78.1.4 | Integer32 | read-write | SPBM Ethertype |
| rcMsdp | 1.3.6.1.4.1.2272.1.80 | |||
| rcMsdpMib | 1.3.6.1.4.1.2272.1.80.1 | |||
| rcMsdpNotifications | 1.3.6.1.4.1.2272.1.80.1.0 | |||
| NTF rcnMsdpMaxSACacheWarnSet | 1.3.6.1.4.1.2272.1.80.1.0.1 | This event is generated when the SA entries in the cache database exceeds 85 % of maximum value (6K) in local cache or in foreign cache. | ||
| NTF rcnMsdpMaxSACacheWarnClear | 1.3.6.1.4.1.2272.1.80.1.0.2 | This event is generated when the Sa entries in the cache database drops to 80 % of the maximum value (6K). | ||
| NTF rcnMsdpMaxSACacheErrorSet | 1.3.6.1.4.1.2272.1.80.1.0.3 | This event is generated when the SA entries in the cache database hits 100 % of the maximum value (6K). | ||
| NTF rcnMsdpMaxSACacheErrorClear | 1.3.6.1.4.1.2272.1.80.1.0.4 | This event is generated when the SA entries in the cache database drops to 95% of the maximum value. | ||
| NTF rcnMsdpMaxPeerSACacheWarnSet | 1.3.6.1.4.1.2272.1.80.1.0.5 | This event is generated when the SA entries for this peer exceeds 85 % of maximum value configured for this peer. | ||
| NTF rcnMsdpMaxPeerSACacheWarnClear | 1.3.6.1.4.1.2272.1.80.1.0.6 | This event is generated when the SA entries for this peer drops to 80 % of the maximum value configured for this peer. | ||
| NTF rcnMsdpMaxPeerSACacheErrorSet | 1.3.6.1.4.1.2272.1.80.1.0.7 | This event is generated when the SA entries for this peer hits 100 % of the peer SA limit. | ||
| NTF rcnMsdpMaxPeerSACacheErrorClear | 1.3.6.1.4.1.2272.1.80.1.0.8 | This event is generated when the SA entries for this peer drops to 95% of the peer SA limit. | ||
| NTF rcnMsdpEstablished | 1.3.6.1.4.1.2272.1.80.1.0.9 | The MSDP Established event is generated when the MSDP FSM enters the ESTABLISHED state. | ||
| NTF rcnMsdpBackwardTransition | 1.3.6.1.4.1.2272.1.80.1.0.10 | The MSDPBackwardTransition Event is generated when the MSDP FSM moves from a higher-numbered state to a lower-numbered state. | ||
| rcMsdpObjects | 1.3.6.1.4.1.2272.1.80.1.1 | |||
| rcMsdpScalars | 1.3.6.1.4.1.2272.1.80.1.1.1 | |||
| STR rcMsdpRouteMapName | 1.3.6.1.4.1.2272.1.80.1.1.1.1 | SnmpAdminString | read-write | Route map name. Transmit only the SA messages that meet the match criteria in the route map name with a permit keyword. It is used as the policy of the redistribute filter. It can not be set when redistribute filter is disabled. |
| T/F rcMsdpRedistributeFilterEnabled | 1.3.6.1.4.1.2272.1.80.1.1.1.2 | TruthValue | read-write | To enable or disable the redistribute filter. This filter is used to filter the (S,G,RP) entries provided by PIM to MSDP. |
| T/F rcMsdpRedistributeFilterApply | 1.3.6.1.4.1.2272.1.80.1.1.1.3 | TruthValue | read-write | Each time when making changes to the redistribute filter, it will not take effect until it is applied. |
| T/F rcMsdpImplicitDefaultPeerEnabled | 1.3.6.1.4.1.2272.1.80.1.1.1.4 | TruthValue | read-write | To enable or disable the implicit default peer of MSDP. If enabled,it will accept SA messages even if the Peer RPF(Reverse Path Forwarding) rules fails, condition is that there should be only one peer configured. |
| T/F rcMsdpSACacheStatsClear | 1.3.6.1.4.1.2272.1.80.1.1.1.5 | TruthValue | read-write | Clear foreign SA-Cache entries. |
| rcMsdpPeerTable | 1.3.6.1.4.1.2272.1.80.1.1.2 | not-accessible | A table that augments the management information in the standard IETF msdpPeerTable. | |
| rcMsdpPeerEntry | 1.3.6.1.4.1.2272.1.80.1.1.2.1 | not-accessible | A set of additional management information augmenting that of the standard IETF msdpPeerEntry. | |
| I32 rcMsdpPeerAsNumber | 1.3.6.1.4.1.2272.1.80.1.1.2.1.1 | Integer32 | read-create | The AS number of the remote Peer. Value -1 indicates that AS number is not configured. |
| C32 rcMsdpPeerTooShortMessages | 1.3.6.1.4.1.2272.1.80.1.1.2.1.2 | Counter32 | read-only | The number of Short messages received from this peer. |
| C32 rcMsdpPeerInBadMessages | 1.3.6.1.4.1.2272.1.80.1.1.2.1.3 | Counter32 | read-only | The number of Bad MSDP messages received from this peer. |
| C32 rcMsdpPeerInKeepAliveMessages | 1.3.6.1.4.1.2272.1.80.1.1.2.1.4 | Counter32 | read-only | The number of keep alive messages received from this peer. |
| C32 rcMsdpPeerOutKeepAliveMessages | 1.3.6.1.4.1.2272.1.80.1.1.2.1.5 | Counter32 | read-only | The number of keep alive messages transmitted to this peer. |
| T/F rcMsdpPeerInSAFilterEnabled | 1.3.6.1.4.1.2272.1.80.1.1.2.1.6 | TruthValue | read-create | To enable or disable the in SA filter of a peer. |
| STR rcMsdpPeerInSAFilterRouteMapName | 1.3.6.1.4.1.2272.1.80.1.1.2.1.7 | SnmpAdminString | read-create | The route Map name of IN SA Filter. If route map name is configured, it Accepts only the SA messages that meet the match criteria in the route map map-name with a permit keyword. If access route map name is not configured, all inbound SA messages from this peer will be blocked. |
| T/F rcMsdpPeerOutSAFilterEnabled | 1.3.6.1.4.1.2272.1.80.1.1.2.1.8 | TruthValue | read-create | To enable or disable the out SA filter of a peer. |
| STR rcMsdpPeerOutSAFilterRouteMapName | 1.3.6.1.4.1.2272.1.80.1.1.2.1.9 | SnmpAdminString | read-create | The route Map name of OUT SA Filter. If route map name is configured, it sends only the SA messages that meet the match criteria in the route map map-name with a permit keyword. If access route map name is not configured, all outbound SA messages sent to this peer will be blocked |
| STR rcMsdpPeerDescription | 1.3.6.1.4.1.2272.1.80.1.1.2.1.10 | SnmpAdminString | read-create | Peer specific description. It is used to make the peer easier to be identified. |
| U32 rcMsdpPeerSALimit | 1.3.6.1.4.1.2272.1.80.1.1.2.1.11 | Unsigned32 | read-create | The SA Cache limit for this peer. |
| T/F rcMsdpPeerMd5AuthEnabled | 1.3.6.1.4.1.2272.1.80.1.1.2.1.12 | TruthValue | read-create | The MD5 Authentication status of this peer. |
| STR rcMsdpPeerMd5AuthPassword | 1.3.6.1.4.1.2272.1.80.1.1.2.1.13 | SnmpAdminString | read-create | The MD5 Authentication password of this peer. |
| C32 rcMsdpPeerSAsLearnedFromThisPeer | 1.3.6.1.4.1.2272.1.80.1.1.2.1.14 | Counter32 | read-only | The total number of SAs learned from this peer. |
| C32 rcMsdpPeerSAsAdvertisedToThisPeer | 1.3.6.1.4.1.2272.1.80.1.1.2.1.15 | Counter32 | read-only | The total number of SAs advertised to this peer. |
| TIK rcMsdpPeerUpOrDownTime | 1.3.6.1.4.1.2272.1.80.1.1.2.1.16 | TimeTicks | read-only | MSDP Peer Up or Down duration. |
| TIK rcMsdpPeerConnAndStatsClearedTime | 1.3.6.1.4.1.2272.1.80.1.1.2.1.17 | TimeTicks | read-only | The duration of connection and statistics cleared ago. |
| STR rcMsdpPeerRouteMapName | 1.3.6.1.4.1.2272.1.80.1.1.2.1.18 | SnmpAdminString | read-create | Route map name for default peer. |
| T/F rcMsdpPeerAdminEnabled | 1.3.6.1.4.1.2272.1.80.1.1.2.1.19 | TruthValue | read-create | The admin status of this peer. |
| T/F rcMsdpPeerOperEnabled | 1.3.6.1.4.1.2272.1.80.1.1.2.1.20 | TruthValue | read-only | The operational status of this peer. |
| INT rcMsdpPeerDefaultPeerState | 1.3.6.1.4.1.2272.1.80.1.1.2.1.21 | INTEGER | read-only | The default peer has two state: Configured and Operational. MSDP node only accept SA messages from the Operational default peer. These is only one default peer can become Operational, all the Configured default peers are for redundancy. |
| T/F rcMsdpPeerDefaultPeer | 1.3.6.1.4.1.2272.1.80.1.1.2.1.22 | TruthValue | read-create | It is used to indicate whether a peer is a default peer or not. |
| rcMsdpSACacheTable | 1.3.6.1.4.1.2272.1.80.1.1.3 | not-accessible | SA (Source Active) - Cache Table. This table contains foreign as well as local SA Cache entries. Foreign SA Cache entries from this table will have corresponding entries in the standard table msdpSACacheTable | |
| rcMsdpSACacheEntry | 1.3.6.1.4.1.2272.1.80.1.1.3.1 | not-accessible | SA Cache Entry. | |
| IP rcMsdpSACacheGroupAddr | 1.3.6.1.4.1.2272.1.80.1.1.3.1.1 | IpAddress | not-accessible | The group address of the SA Cache entry. |
| IP rcMsdpSACacheSourceAddr | 1.3.6.1.4.1.2272.1.80.1.1.3.1.2 | IpAddress | not-accessible | The source address of the SA Cache entry. |
| IP rcMsdpSACacheOriginRP | 1.3.6.1.4.1.2272.1.80.1.1.3.1.3 | IpAddress | not-accessible | The RP of the SA Cache entry. This field is in the INDEX in order to catch multiple RP's advertising the same source and group. |
| INT rcMsdpSACacheTypeInformation | 1.3.6.1.4.1.2272.1.80.1.1.3.1.4 | INTEGER | not-accessible | This object describes the SA cache type. It can be either local cache or foreign cache. |
| U32 rcMsdpSACacheOriginatorAsNumber | 1.3.6.1.4.1.2272.1.80.1.1.3.1.5 | Unsigned32 | read-only | The AS number of the originator. |
| INT rcMsdpSACacheRouteType | 1.3.6.1.4.1.2272.1.80.1.1.3.1.6 | INTEGER | read-only | The owner of the route that is used for rpf checking. |
| rcMsdpNotificationObjects | 1.3.6.1.4.1.2272.1.80.1.2 | |||
| INT rcMsdpSACacheType | 1.3.6.1.4.1.2272.1.80.1.2.1 | INTEGER | accessible-for-notify | This object describes the SA cache type. |
| OID rcMsdpVrfId | 1.3.6.1.4.1.2272.1.80.1.2.2 | VrfIdentifier | accessible-for-notify | VRF ID for the MSDP. |
| rcBfd | 1.3.6.1.4.1.2272.1.81 | |||
| rcBfdTmpMib | 1.3.6.1.4.1.2272.1.81.1 | |||
| rcBfdTmpNotifications | 1.3.6.1.4.1.2272.1.81.1.0 | |||
| NTF rcBfdTmpSessUp | 1.3.6.1.4.1.2272.1.81.1.0.1 | This notification is generated when the bfdSessState object for one or more contiguous entries in bfdSessTable are about to enter the up(2) state from some other state. The included values of bfdSessDiag MUST both be set equal to this new state (i.e: up(1)). The two instances of bfdSessDiag in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For the cases where a contiguous range of sessions have transitioned into the up(1) state at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single bfdSessEntry, then the instance identifier (and values) of the two bfdSessDiag objects MUST be the identical. | ||
| NTF rcBfdTmpSessDown | 1.3.6.1.4.1.2272.1.81.1.0.2 | This notification is generated when the bfdSessState object for one or more contiguous entries in bfdSessTable are about to enter the down(4) or adminDown(5) states from some other state. The included values of bfdSessDiag MUST both be set equal to this new state (i.e: down(4) or adminDown(5)). The two instances of bfdSessDiag in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For cases where a contiguous range of sessions have transitioned into the down(4) or adminDown(5) states at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single bfdSessEntry, then the instance identifier (and values) of the two bfdSessDiag objects MUST be the identical. | ||
| rcBfdTmpObjects | 1.3.6.1.4.1.2272.1.81.1.1 | |||
| rcBfdTmpScalarObjects | 1.3.6.1.4.1.2272.1.81.1.1.1 | |||
| INT rcBfdTmpAdminStatus | 1.3.6.1.4.1.2272.1.81.1.1.1.1 | INTEGER | read-write | The global administrative status of BFD in this router. The value 'enabled' denotes that the BFD Process is active on at least one interface; 'disabled' disables it on all interfaces. |
| U32 rcBfdTmpVersionNumber | 1.3.6.1.4.1.2272.1.81.1.1.1.3 | Unsigned32 | read-only | The current version number of the BFD protocol. |
| T/F rcBfdTmpSessNotificationsEnable | 1.3.6.1.4.1.2272.1.81.1.1.1.4 | TruthValue | read-write | If this object is set to true(1), then it enables the emission of bfdSessUp and bfdSessDown notifications; otherwise these notifications are not emitted. |
| rcBfdTmpSessTable | 1.3.6.1.4.1.2272.1.81.1.1.2 | not-accessible | The BFD Session Table describes the BFD sessions. | |
| rcBfdTmpSessEntry | 1.3.6.1.4.1.2272.1.81.1.1.2.1 | not-accessible | The BFD Session Entry describes BFD session. | |
| RCB rcBfdTmpSessIndex | 1.3.6.1.4.1.2272.1.81.1.1.2.1.1 | RcBfdTmpSessIndexTC | not-accessible | This object contains an index used to represent a unique BFD session on this device. |
| U32 rcBfdTmpSessApplicationId | 1.3.6.1.4.1.2272.1.81.1.1.2.1.2 | Unsigned32 | read-only | This object contains an index used to indicate a local application which owns or maintains this BFD session. For instance, the MPLS VPN process may maintain a subset of the total number of BFD sessions. This application ID provides a convenient way to segregate sessions by the applications which maintain them. |
| U32 rcBfdTmpSessDiscriminator | 1.3.6.1.4.1.2272.1.81.1.1.2.1.3 | Unsigned32 | read-only | This object specifies the local discriminator for this BFD session, used to uniquely identify it. |
| U32 rcBfdTmpSessRemoteDiscr | 1.3.6.1.4.1.2272.1.81.1.1.2.1.4 | Unsigned32 | read-only | This object specifies the session discriminator chosen by the remote system for this BFD session. |
| INE rcBfdTmpSessUdpPort | 1.3.6.1.4.1.2272.1.81.1.1.2.1.5 | InetPortNumber | read-create | The UDP Port for BFD. The default value is the well-known value for this port. |
| INT rcBfdTmpSessState | 1.3.6.1.4.1.2272.1.81.1.1.2.1.6 | INTEGER | read-only | The perceived state of the BFD session. |
| T/F rcBfdTmpSessRemoteHeardFlag | 1.3.6.1.4.1.2272.1.81.1.1.2.1.7 | TruthValue | read-only | This object specifies status of BFD packet reception from the remote system. Specifically, it is set to true(1) if the local system is actively receiving BFD packets from the remote system, and is set to false(0) if the local system has not received BFD packets recently (within the detection time) or if the local system is attempting to tear down the BFD session. |
| U32 rcBfdTmpSessDiag | 1.3.6.1.4.1.2272.1.81.1.1.2.1.8 | Unsigned32 | accessible-for-notify | A diagnostic code specifying the local system's reason for the last transition of the session from up(1) to some other state. |
| INT rcBfdTmpSessOperMode | 1.3.6.1.4.1.2272.1.81.1.1.2.1.9 | INTEGER | read-only | This object specifies current operating mode that BFD session is operating in. A value of AsyncModeWEchoFun(1) ... A value of AsynchModeWOEchoFun(2) ... A value of DemandModeWEchoFunction(3) ... A value of DemandModeWOEchoFunction(4) ... |
| T/F rcBfdTmpSessDemandModeDesiredFlag | 1.3.6.1.4.1.2272.1.81.1.1.2.1.10 | TruthValue | read-create | This object indicates that the local system's desire to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or false(0) if not |
| T/F rcBfdTmpSessEchoFuncModeDesiredFlag | 1.3.6.1.4.1.2272.1.81.1.1.2.1.11 | TruthValue | read-create | This object indicates that the local system's desire to use Echo mode. Specifically, it is set to true(1) if the local system wishes to use Echo mode or false(0) if not |
| T/F rcBfdTmpSessControlPlanIndepFlag | 1.3.6.1.4.1.2272.1.81.1.1.2.1.12 | TruthValue | read-create | This object indicates that the local system's ability to continue to function through a disruption of the control plane. Specifically, it is set to true(1) if the local system BFD implementation is independent of the control plane. Otherwise, the value is set to false(0) |
| IPt rcBfdTmpSessAddrType | 1.3.6.1.4.1.2272.1.81.1.1.2.1.13 | InetAddressType | read-create | This object specifies IP address of the interface associated with this BFD session. Only values unknown(0), ipv4(1) or ipv6(2) have to be supported. A value of unknown(0) is allowed only when the outgoing interface is of type point-to-point, or when the BFD session is not associated with a specific interface. If any other unsupported values are attempted in a set operation, the agent MUST return an inconsistentValue error. |
| IP rcBfdTmpSessAddr | 1.3.6.1.4.1.2272.1.81.1.1.2.1.14 | InetAddress | read-create | This object specifies IP address of the interface associated with this BFD session. It can also be used to enabled BFD on a specific interface. The value is set to zero when BFD session is not associated with a specific interface. |
| NUM rcBfdTmpSessDesiredMinTxInterval | 1.3.6.1.4.1.2272.1.81.1.1.2.1.15 | RcBfdTmpInterval | read-create | This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. |
| NUM rcBfdTmpSessReqMinRxInterval | 1.3.6.1.4.1.2272.1.81.1.1.2.1.16 | RcBfdTmpInterval | read-create | This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. |
| NUM rcBfdTmpSessReqMinEchoRxInterval | 1.3.6.1.4.1.2272.1.81.1.1.2.1.17 | RcBfdTmpInterval | read-create | This object specifies the minimum interval, in microseconds, between received BFD Echo packets that this system is capable of supporting. |
| U32 rcBfdTmpSessDetectMult | 1.3.6.1.4.1.2272.1.81.1.1.2.1.18 | Unsigned32 | read-create | This object specifies the Detect time multiplier. |
| STO rcBfdTmpSessStorType | 1.3.6.1.4.1.2272.1.81.1.1.2.1.19 | StorageType | read-create | This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| ROW rcBfdTmpSessRowStatus | 1.3.6.1.4.1.2272.1.81.1.1.2.1.20 | RowStatus | read-create | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row can be modified except the bfdSessRowStatus and bfdSessStorageType. |
| T/F rcBfdTmpSessAuthPresFlag | 1.3.6.1.4.1.2272.1.81.1.1.2.1.21 | TruthValue | read-create | This object indicates that the local system's desire to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be authenticated or false(0) if not |
| INT rcBfdTmpSessAuthenticationType | 1.3.6.1.4.1.2272.1.81.1.1.2.1.22 | INTEGER | read-create | The Authentication Type used for this BFD session. This field is valid only when the Authentication Present bit is set |
| rcBfdTmpSessPerfTable | 1.3.6.1.4.1.2272.1.81.1.1.3 | not-accessible | This table specifies BFD Session performance counters. | |
| rcBfdTmpSessPerfEntry | 1.3.6.1.4.1.2272.1.81.1.1.3.1 | not-accessible | An entry in this table is created by a BFD-enabled node for every BFD Session. bfdCounterDiscontinuityTime is used to indicate potential discontinuity for all counter objects in this table. | |
| C32 rcBfdTmpSessPerfPktIn | 1.3.6.1.4.1.2272.1.81.1.1.3.1.1 | Counter32 | read-only | The total number of BFD messages received for this BFD session. |
| C32 rcBfdTmpSessPerfPktOut | 1.3.6.1.4.1.2272.1.81.1.1.3.1.2 | Counter32 | read-only | The total number of BFD messages sent for this BFD session. |
| TIM rcBfdTmpSessUpTime | 1.3.6.1.4.1.2272.1.81.1.1.3.1.3 | TimeStamp | read-only | The value of sysUpTime on the most recent occasion at which the session came up. If no such up event exists this object contains a zero value. |
| TIM rcBfdTmpSessPerfLastSessDownTime | 1.3.6.1.4.1.2272.1.81.1.1.3.1.4 | TimeStamp | read-only | The value of sysUpTime on the most recent occasion at which the last time communication was lost with the neighbor. If no such down event exist this object contains a zero value. |
| RCB rcBfdTmpSessPerfLastCommLostDiag | 1.3.6.1.4.1.2272.1.81.1.1.3.1.5 | RcBfdTmpDiag | read-only | The BFD diag code for the last time communication was lost with the neighbor. If no such down event exists this object contains a zero value. |
| C32 rcBfdTmpSessPerfSessUpCount | 1.3.6.1.4.1.2272.1.81.1.1.3.1.6 | Counter32 | read-only | The number of times this session has gone into the Up state since the router last rebooted. |
| TIM rcBfdTmpSessPerfDiscTime | 1.3.6.1.4.1.2272.1.81.1.1.3.1.7 | TimeStamp | read-only | The value of sysUpTime on the most recent occasion at which any one or more of the session counters suffered a discontinuity. The relevant counters are the specific instances associated with this BFD session of any Counter32 object contained in the BfdSessPerfTable. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value. |
| C64 rcBfdTmpSessPerfPktInHC | 1.3.6.1.4.1.2272.1.81.1.1.3.1.8 | Counter64 | read-only | This value represents the total number of BFD messages received for this BFD session. It MUST be equal to the least significant 32 bits of bfdSessPerfPktIn if bfdSessPerfPktInHC is supported according to the rules spelled out in RFC2863. |
| C64 rcBfdTmpSessPerfPktOutHC | 1.3.6.1.4.1.2272.1.81.1.1.3.1.9 | Counter64 | read-only | This value represents the total number of total number of BFD messages transmitted for this BFD session. It MUST be equal to the least significant 32 bits of bfdSessPerfPktIn if bfdSessPerfPktOutHC is supported according to the rules spelled out in RFC2863. |
| rcBfdTmpSessMapTable | 1.3.6.1.4.1.2272.1.81.1.1.4 | not-accessible | The BFD Session Mapping Table maps the complex indexing of the BFD sessions to the flat BFDIndex used in the BfdSessionTable. Implementors need to be aware that if the value of the bfdSessAddr (an OID) has more that 111 sub-identifiers, then OIDs of column instances in this table will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. | |
| rcBfdTmpSessMapEntry | 1.3.6.1.4.1.2272.1.81.1.1.4.1 | not-accessible | The BFD Session Entry describes BFD session that is mapped to this index. Implementors need to be aware that if the value of the mplsInSegmentMapLabelPtrIndex (an OID) has more that 111 sub-identifiers, then OIDs of column instances in this table will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. | |
| RCB rcBfdTmpSessMapBfdIndex | 1.3.6.1.4.1.2272.1.81.1.1.4.1.1 | RcBfdTmpSessIndexTC | read-only | This object specifies the BfdIndex referred to by the indexes of this row. In essence, a mapping is provided between these indexes and the BfdSessTable. |
| rcBfdExtMib | 1.3.6.1.4.1.2272.1.81.2 | |||
| rcBfdExtObjects | 1.3.6.1.4.1.2272.1.81.2.1 | |||
| rcBfdExtSessTable | 1.3.6.1.4.1.2272.1.81.2.1.1 | not-accessible | The BFD Session Extension Table describes the BFD sessions. | |
| rcBfdExtSessEntry | 1.3.6.1.4.1.2272.1.81.2.1.1.1 | not-accessible | The BFD Session Extension Entry describes BFD session. | |
| INT rcBfdExtSessPeerState | 1.3.6.1.4.1.2272.1.81.2.1.1.1.1 | INTEGER | read-only | The perceived peer state of the BFD session. |
| IPt rcBfdExtSessPeerAddrType | 1.3.6.1.4.1.2272.1.81.2.1.1.1.2 | InetAddressType | read-only | Inet Address Type of peer IP address associated with this BFD session. |
| IP rcBfdExtSessPeerAddr | 1.3.6.1.4.1.2272.1.81.2.1.1.1.3 | InetAddress | read-only | This object specifies peer IP address associated with this BFD session. |
| STR rcBfdExtSessApp | 1.3.6.1.4.1.2272.1.81.2.1.1.1.4 | SnmpAdminString | read-only | This object specifies the applications configured on this BFD session. |
| STR rcBfdExtSessAppRun | 1.3.6.1.4.1.2272.1.81.2.1.1.1.5 | SnmpAdminString | read-only | This object specifies the applications running on this BFD session. |
| rcKhi | 1.3.6.1.4.1.2272.1.85 | |||
| rcKhiConfig | 1.3.6.1.4.1.2272.1.85.1 | |||
| T/F rcKhiConfigKhiAdminState | 1.3.6.1.4.1.2272.1.85.1.1 | TruthValue | read-write | Key Health Inidaction, this object is used turn off the KHI feature administratively. true(1) means On, false(2) means off. By default, it is always set to true(1). |
| U32 rcKhiConfigKhiBootDelay | 1.3.6.1.4.1.2272.1.85.1.2 | Unsigned32 | read-write | Time interval from system up and running to start the KHI feature. Set to 0 to disable to the time interval. |
| BIT rcKhiConfigClearAction | 1.3.6.1.4.1.2272.1.85.1.3 | Bits | read-write | Clear action with bits set. 0 Bit means from left (most sinificant) bit to right (less sinificnt) bit |
| T/F rcKhiConfigPortKhiAdminState | 1.3.6.1.4.1.2272.1.85.1.4 | TruthValue | read-write | Key Health Inidcation, this object is used turn off the Port KHI feature administratively. true(1) means On, false(2) means off. By default, it is always set to true(1). |
| T/F rcKhiConfigPerfKhiAdminState | 1.3.6.1.4.1.2272.1.85.1.5 | TruthValue | read-write | Key Health Inidcation, this object is used turn off the Performance KHI feature administratively. true(1) means On, false(2) means off. By default, it is always set to true(1). |
| T/F rcKhiConfigChasKhiAdminState | 1.3.6.1.4.1.2272.1.85.1.6 | TruthValue | read-write | Key Health Inidcation, this object is used turn off the Chassis KHI feature administratively. true(1) means On, false(2) means off. By default, it is always set to true(1). |
| T/F rcKhiConfigForwardingKhiAdminState | 1.3.6.1.4.1.2272.1.85.1.7 | TruthValue | read-write | Key Health Inidcation, this object is used turn off the Forwarding KHI feature administratively. true(1) means On, false(2) means off. By default, it is always set to true(1). |
| T/F rcKhiConfigMgmtKhiAdminState | 1.3.6.1.4.1.2272.1.85.1.8 | TruthValue | read-write | Key Health Inidcation, this object is used turn off the Management KHI feature administratively. true(1) means On, false(2) means off. By default, it is always set to true(1). |
| rcKhiHighLevel | 1.3.6.1.4.1.2272.1.85.2 | |||
| INT rcKhiHighLevelKhiOperStatus | 1.3.6.1.4.1.2272.1.85.2.1 | INTEGER | read-only | Indicate if the KHI feature is on(1), off(2) or wait(3). running (1) means KHI is enabled and running. off(2) means KHI is disabled wait(3) means KHI is enabled but it is not running yet. At beginning of system boot up, KHI can be set to wait for start time (rcKhiHighLevelKhiStartTime) to experied then start the KHI monitor the system. This allows the system fully up and start the KHI info. When Operation Status is off or wait, all KHI status will not be valid |
| KHI rcKhiHighLevelChassisCurrentStatus | 1.3.6.1.4.1.2272.1.85.2.2 | KhiStatusValue | read-only | Chassis current status. Include: Chassis Temperature, Fan Temperature and operational status, Line card operational status, Mezz operational status, HA status. This object show GREEN when all of above are GREEN. Otherwise, it will show the highest alert in ther order of Red, Yellow, or Green green(1): All Chassis parameters are normal. yellow(2): One of chassis parameter in alert state red(3): One or more Chassis parameters are in critical state. |
| KHI rcKhiHighLevelChassisFirstHighestEvent | 1.3.6.1.4.1.2272.1.85.2.3 | KhiStatusValue | read-only | The first highest alert changing of chassis status since last boot or last clear (rcKhiConfigClearAction). green(1): All Chassis parameters were normal. yellow(2): One or more Chassis parameter has changed. red(3): One or more Chassis parameters were in critical state. |
| DAT rcKhiHighLevelChassisFirstHighestEventTime | 1.3.6.1.4.1.2272.1.85.2.4 | DateAndTime | read-only | Timestamp of first highest alert of chassis status indication (rcKhiHighLevelChassisChangeStatus) |
| KHI rcKhiHighLevelChassisRefStatus | 1.3.6.1.4.1.2272.1.85.2.5 | KhiStatusValue | read-only | Chassis reference status before the first the first change and since last boot or last clear (rcKhiConfigClearAction). green(1): All Chassis parameters were normal. yellow(2): One or more Chassis parameter has changed. red(3): One or more Chassis parameters were in critical state. |
| DAT rcKhiHighLevelChassisStatusLastClearTime | 1.3.6.1.4.1.2272.1.85.2.6 | DateAndTime | read-only | chassis status last clear time stamp |
| KHI rcKhiHighLevelCpuPerfCurrentStatus | 1.3.6.1.4.1.2272.1.85.2.7 | KhiStatusValue | read-only | Current CPU Performance Status. Inlcudes: CPU utilization, Fabric utilization, Buffer utilization, Dram Size, Suspended task, CPU control status. green(1): All chassis parameter are normal yellow(2): One or more Chassis parameters have changed. red(3): One or more Chassis parameters are in critical state. |
| KHI rcKhiHighLevelCpuPerfFirstHighestEvent | 1.3.6.1.4.1.2272.1.85.2.8 | KhiStatusValue | read-only | The first highest alert change of CPU performance status since last boot or last clear (rcKhiConfigClearAction). green(1): All Chassis parameters were normal. yellow(2): One or more Chassis parameter has changed. red(3): One or more Chassis parameters are in critical state. |
| DAT rcKhiHighLevelCpuPerfFirstHighestEventTime | 1.3.6.1.4.1.2272.1.85.2.9 | DateAndTime | read-only | Timestamp of first highest alert change of CPU Performance status (rcKhiHighLevelCpuPerfChangeStatus) |
| KHI rcKhiHighLevelCpuPerfRefStatus | 1.3.6.1.4.1.2272.1.85.2.10 | KhiStatusValue | read-only | CPU performance reference status before the first change since last boot or last clear (rcKhiConfigClearAction). green(1): All Chassis parameters were normal. yellow(2): One or more Chassis parameter has changed. red(3): One or more Chassis parameters are in critical state. |
| DAT rcKhiHighLevelCpuPerfStatusLastClearTime | 1.3.6.1.4.1.2272.1.85.2.11 | DateAndTime | read-only | CPU Performance last clear time stamp |
| KHI rcKhiHighLevelPortCurrentStatus | 1.3.6.1.4.1.2272.1.85.2.12 | KhiStatusValue | read-only | Ports current status. green(1): Port link state has no change. yellow(2): Port link state is changed by admin. red(3): Port link state is in critical state. |
| KHI rcKhiHighLevelPortFirstHighestEvent | 1.3.6.1.4.1.2272.1.85.2.13 | KhiStatusValue | read-only | The first highest change indication of ports status since last boot or last clear (rcKhiConfigClearAction). green(1): Port link state had no change. yellow(2): Port link state was changed by admin. red(3): Port link state was in critical state. |
| DAT rcKhiHighLevelPortFirstHighestEventTime | 1.3.6.1.4.1.2272.1.85.2.14 | DateAndTime | read-only | Timestamp of first highest inidcation of Ports status status indication (rcKhiHighLevelPortChangeStatus) |
| KHI rcKhiHighLevelPortRefStatus | 1.3.6.1.4.1.2272.1.85.2.15 | KhiStatusValue | read-only | Ports reference status before first change since last boot or last clear (rcKhiConfigClearAction). green(1): Port link state had no change. yellow(2): Port link state was changed by admin. red(3): Port link state was in critical state. |
| DAT rcKhiHighLevelPortStatusLastClearTime | 1.3.6.1.4.1.2272.1.85.2.16 | DateAndTime | read-only | Ports status last clear time stamp |
| KHI rcKhiHighLevelForwardingCurrentStatus | 1.3.6.1.4.1.2272.1.85.2.17 | KhiStatusValue | read-only | Forwarding current status. green(1): Port link state has no change. yellow(2): Port link state is changed by admin. red(3): Port link state is in critical state. |
| KHI rcKhiHighLevelForwardingFirstHighestEvent | 1.3.6.1.4.1.2272.1.85.2.18 | KhiStatusValue | read-only | The frist highest changing inidcation of Forwarding status since last boot or clear. green(1): Port link state had no change. yellow(2): Port link state was changed by admin. red(3): Port link state was in critical state. |
| DAT rcKhiHighLevelForwardingFirstHighestEventTime | 1.3.6.1.4.1.2272.1.85.2.19 | DateAndTime | read-only | Timestamp of first highest inidcation of Forwarding status status indication (rcKhiHighLevelForwardingChangeStatus) |
| KHI rcKhiHighLevelForwardingRefStatus | 1.3.6.1.4.1.2272.1.85.2.20 | KhiStatusValue | read-only | Forwarding reference status before the first change since last boot or clear. green(1): Port link state had no change. yellow(2): Port link state was changed by admin. red(3): Port link state was in critical state. |
| DAT rcKhiHighLevelForwardingStatusLastClearTime | 1.3.6.1.4.1.2272.1.85.2.21 | DateAndTime | read-only | Forwarding status last clear time stamp |
| C32 rcKhiHighLevelTotalConfigVlanCount | 1.3.6.1.4.1.2272.1.85.2.22 | Counter32 | read-only | Total Number of Vlan configured in device |
| C32 rcKhiHighLevelTotalConfigIpIfCount | 1.3.6.1.4.1.2272.1.85.2.23 | Counter32 | read-only | Total Configured IP Interface count |
| C32 rcKhiHighLevelTotalOperIpIfCurrentCount | 1.3.6.1.4.1.2272.1.85.2.24 | Counter32 | read-only | Current total operational IP Interface count |
| DAT rcKhiHighLevelIpIfFirstChangeTime | 1.3.6.1.4.1.2272.1.85.2.25 | DateAndTime | read-only | Timestamp of first change of IP interface |
| C32 rcKhiHighLevelTotalOperIpIfReferenceCount | 1.3.6.1.4.1.2272.1.85.2.26 | Counter32 | read-only | Reference count of total operational IP berfore the first change since last boot or last clear |
| DAT rcKhiHighLevelIpIfLastClearTime | 1.3.6.1.4.1.2272.1.85.2.27 | DateAndTime | read-only | IP interface last clear time stamp |
| C32 rcKhiHighLevelGlobalRouterTotalRouteCount | 1.3.6.1.4.1.2272.1.85.2.28 | Counter32 | read-only | Total number of route count in VRF 0, which is default VRF |
| C32 rcKhiHighLevelGlobalRouterTotalRouteRefCount | 1.3.6.1.4.1.2272.1.85.2.29 | Counter32 | read-only | Total number of route reference count in VRF 0, which is default VRF |
| DAT rcKhiHighLevelGlobalRouterLastClearTime | 1.3.6.1.4.1.2272.1.85.2.30 | DateAndTime | read-only | Global router total routes last clear time stamp |
| C32 rcKhiHighLevelGlobalRouterTotalBestRouteCount | 1.3.6.1.4.1.2272.1.85.2.31 | Counter32 | read-only | total number of best route count in VRF 0 (default VRF) |
| C32 rcKhiHighLevelGlobalRouterBestRouteRefCount | 1.3.6.1.4.1.2272.1.85.2.32 | Counter32 | read-only | Total number of best route reference count in VRF 0, which is default VRF |
| DAT rcKhiHighLevelGlobalRouterBestRouteLastClearTime | 1.3.6.1.4.1.2272.1.85.2.33 | DateAndTime | read-only | Global router total best routes last clear time stamp |
| C32 rcKhiHighLevelNonZeroVrfsTotalRouteCount | 1.3.6.1.4.1.2272.1.85.2.34 | Counter32 | read-only | Total number of route count in Non Zero Vrfs |
| C32 rcKhiHighLevelNonZeroVrfsTotalRouteRefCount | 1.3.6.1.4.1.2272.1.85.2.35 | Counter32 | read-only | Total number of route reference count in non zero VRF |
| DAT rcKhiHighLevelNonZeroVrfsRouteLastClearTime | 1.3.6.1.4.1.2272.1.85.2.36 | DateAndTime | read-only | Non zero vrf total routes last clear time stamp |
| C32 rcKhiHighLevelNonZeroVrfsTotalBestRouteCount | 1.3.6.1.4.1.2272.1.85.2.37 | Counter32 | read-only | total number of best route count in Non Zero Vrfs |
| C32 rcKhiHighLevelNonZeroVrfsBestRouteRefCount | 1.3.6.1.4.1.2272.1.85.2.38 | Counter32 | read-only | Total number of best route reference count in non zero VRF |
| DAT rcKhiHighLevelNonZeroVrfsBestRouteLastClearTime | 1.3.6.1.4.1.2272.1.85.2.39 | DateAndTime | read-only | Non zero vrf total best routes last clear time stamp |
| C32 rcKhiHighLevelFdbRecordCount | 1.3.6.1.4.1.2272.1.85.2.40 | Counter32 | read-only | This count includes the number of FDB entries in the CP (Control card) database, it includes the local and remote learnt MACs via IST/SMLT, it is not the actual record count on the line card. |
| C32 rcKhiHighLevelFdbRecordRefCount | 1.3.6.1.4.1.2272.1.85.2.41 | Counter32 | read-only | Total number of fdb record reference count |
| DAT rcKhiHighLevelFdbRecordLastClearTime | 1.3.6.1.4.1.2272.1.85.2.42 | DateAndTime | read-only | FDB Records Last clear time |
| KHI rcKhiHighLevelGlobalRouterProtocolState | 1.3.6.1.4.1.2272.1.85.2.43 | KhiStatusValue | read-only | Global Router Protocol State |
| DAT rcKhiHighLevelGlobalRouterProtocolStateLastClearTime | 1.3.6.1.4.1.2272.1.85.2.44 | DateAndTime | read-only | GR Protocol State last clear time |
| KHI rcKhiHighLevelNonZeroVrfsProtocolState | 1.3.6.1.4.1.2272.1.85.2.45 | KhiStatusValue | read-only | Non zero VRF Protocol State |
| DAT rcKhiHighLevelNonZeroVrfsProtocolStateLastClearTime | 1.3.6.1.4.1.2272.1.85.2.46 | DateAndTime | read-only | Nonzero vrf Protocol State last clear time |
| KHI rcKhiHighLevelIstCurrentStatus | 1.3.6.1.4.1.2272.1.85.2.47 | KhiStatusValue | read-only | Key Health Indicction, IST current status |
| KHI rcKhiHighLevelIstFirstHighestEvent | 1.3.6.1.4.1.2272.1.85.2.48 | KhiStatusValue | read-only | Key Health Indicction, IST changing status since last boot or clear |
| DAT rcKhiHighLevelIstFirstHighestEventTime | 1.3.6.1.4.1.2272.1.85.2.49 | DateAndTime | read-only | Timestamp of first change Ist Status |
| DAT rcKhiHighLevelIstStatusLastClearTime | 1.3.6.1.4.1.2272.1.85.2.50 | DateAndTime | read-only | Ist Status last Clear timestamp |
| C32 rcKhiHighLevelSmltOperPortsCount | 1.3.6.1.4.1.2272.1.85.2.51 | Counter32 | read-only | Current total numbers of SMLT operational ports |
| DAT rcKhiHighLevelSmltOperPortsChangeTime | 1.3.6.1.4.1.2272.1.85.2.52 | DateAndTime | read-only | Timestamp of first change Smlt operational ports |
| C32 rcKhiHighLevelSmltOperPortsReferenceCount | 1.3.6.1.4.1.2272.1.85.2.53 | Counter32 | read-only | Reference count of SMLT operational ports before the first chaneg since last boot or clear |
| DAT rcKhiHighLevelSmltOperPortsLastClearTime | 1.3.6.1.4.1.2272.1.85.2.54 | DateAndTime | read-only | SMLT operational ports count last Clear timestamp |
| C32 rcKhiHighLevelTotalSmltConfigPorts | 1.3.6.1.4.1.2272.1.85.2.55 | Counter32 | read-only | Total number of SMLT configured ports |
| KHI rcKhiHighLevelLogCurrentStatus | 1.3.6.1.4.1.2272.1.85.2.56 | KhiStatusValue | read-only | Logging task current status |
| KHI rcKhiHighLevelLogFirstHighestEvent | 1.3.6.1.4.1.2272.1.85.2.57 | KhiStatusValue | read-only | The highest inidcation of the first change of logging task status since last boot or clear |
| DAT rcKhiHighLevelLogFirstHighestEventTime | 1.3.6.1.4.1.2272.1.85.2.58 | DateAndTime | read-only | Timestamp of first change logging task Status |
| KHI rcKhiHighLevelLogRefStatus | 1.3.6.1.4.1.2272.1.85.2.59 | KhiStatusValue | read-only | log referemce status before the first change since last boot or clear |
| DAT rcKhiHighLevelLogStatusLastClearTime | 1.3.6.1.4.1.2272.1.85.2.60 | DateAndTime | read-only | Ist Status last Clear timestamp |
| C32 rcKhiHighLevelNumOfTcpConnection | 1.3.6.1.4.1.2272.1.85.2.61 | Counter32 | read-only | Total number of TCP connections |
| C32 rcKhiHighLevelNumOfActiveTcpConnection | 1.3.6.1.4.1.2272.1.85.2.62 | Counter32 | read-only | Total number of TCP connections which is establish |
| C32 rcKhiHighLevelNumOfCliUsers | 1.3.6.1.4.1.2272.1.85.2.63 | Counter32 | read-only | Total number of CLI sesssion |
| rcKhiChassis | 1.3.6.1.4.1.2272.1.85.3 | |||
| G32 rcKhiChassisChasTemperature | 1.3.6.1.4.1.2272.1.85.3.1 | Gauge32 | read-only | Used to indicate the core operating temperature of the chassis. This value represents the degree in celsius of the air inside the chassis. |
| G32 rcKhiChassisTemperatureFirstHigherAlert | 1.3.6.1.4.1.2272.1.85.3.2 | Gauge32 | read-only | Used to indicate the the first higher temperature alert of the chassis since last boot or clear. The value is the degree in celsius. |
| DAT rcKhiChassisTemperatureFirstHigherAlertTime | 1.3.6.1.4.1.2272.1.85.3.3 | DateAndTime | read-only | The time at which the first higher temperature alert occur. |
| KHI rcKhiChassisChasTemperatureStatusIndication | 1.3.6.1.4.1.2272.1.85.3.4 | KhiStatusValue | read-only | KHI Status indication |
| INT rcKhiChassisMasterCpuMezzOperState | 1.3.6.1.4.1.2272.1.85.3.5 | INTEGER | read-only | Used to indicate the CPU Mezz card |
| KHI rcKhiChassisMasterCpuMezzStatusIndication | 1.3.6.1.4.1.2272.1.85.3.6 | KhiStatusValue | read-only | the CPU Mezz card status indication |
| INT rcKhiChassisStandbyCpuMezzOperState | 1.3.6.1.4.1.2272.1.85.3.7 | INTEGER | read-only | Used to indicate the CPU Mezz card |
| KHI rcKhiChassisStandbyCpuMezzStatusIndication | 1.3.6.1.4.1.2272.1.85.3.8 | KhiStatusValue | read-only | Used to indicate the CPU Mezz card |
| INT rcKhiChassisStandbyCpuState | 1.3.6.1.4.1.2272.1.85.3.9 | INTEGER | read-only | Indicate the standby-CPU state. initialization - indicate the CPU is in this state (1). oneWayActive - Modules that need to be synchronized have registered with the framework (either locally or a message was received from remote CPU (2). twoWayActive - Modules that need to be synchronized have registered with the framework (either locally or a message was received from remote CPU (3). synchronized - Table based synchroniztion was completed on the current CPU (4). remoteIncompatible - CPUs framework version is incompatible with the remote CPU (5). error - If an invalid event is generated in a given state the CPU enters Error state (6). disabled - High Availability is not enabled (7). peerNotConnected - no peer connection is established (8). peerConnected - peer connection is established (9). lostPeerConnection - lost connection to peer/Standby CPU (10). notSynchronized - Table Sync is not complete (11). |
| KHI rcKhiChassisStandbyCpuStatusIndication | 1.3.6.1.4.1.2272.1.85.3.10 | KhiStatusValue | read-only | the Ha-CPU status indicaton |
| rcKhiChassisHistoryTable | 1.3.6.1.4.1.2272.1.85.3.11 | not-accessible | Chassis table include chassis history info | |
| rcKhiChassisHistoryEntry | 1.3.6.1.4.1.2272.1.85.3.11.1 | not-accessible | A chassis history table entry. | |
| I32 rcKhiChassisHistoryIndex | 1.3.6.1.4.1.2272.1.85.3.11.1.1 | Integer32 | not-accessible | history index for chassis |
| KHI rcKhiChassisHistoryTemperatureStateChange | 1.3.6.1.4.1.2272.1.85.3.11.1.2 | KhiStatusValue | read-only | Chassis temperature state change. Green if temperature =41 and =50 |
| DAT rcKhiChassisHistoryTemperatureStateChangeTime | 1.3.6.1.4.1.2272.1.85.3.11.1.3 | DateAndTime | read-only | Time at which the temperature state change occur. |
| rcKhiChassisFanTable | 1.3.6.1.4.1.2272.1.85.3.12 | not-accessible | Fan table include Fan statistics | |
| rcKhiChassisFanEntry | 1.3.6.1.4.1.2272.1.85.3.12.1 | not-accessible | A chassis fan table entry. | |
| I32 rcKhiChassisFanId | 1.3.6.1.4.1.2272.1.85.3.12.1.1 | Integer32 | not-accessible | An unique index used to identify a particular fan in the system. |
| INT rcKhiChassisFanOperState | 1.3.6.1.4.1.2272.1.85.3.12.1.2 | INTEGER | read-only | Fan operational state |
| INT rcKhiChassisFanFirstStateChange | 1.3.6.1.4.1.2272.1.85.3.12.1.3 | INTEGER | read-only | Fan operational state first change after boot or clear. |
| DAT rcKhiChassisFanFirstStateChangeTime | 1.3.6.1.4.1.2272.1.85.3.12.1.4 | DateAndTime | read-only | Time at which the fan operational state first change occur. |
| KHI rcKhiChassisFanOperStatusIndication | 1.3.6.1.4.1.2272.1.85.3.12.1.5 | KhiStatusValue | read-only | Fan oper state status indication |
| G32 rcKhiChassisFanTemperature | 1.3.6.1.4.1.2272.1.85.3.12.1.6 | Gauge32 | read-only | Fan 1 temperature |
| G32 rcKhiChassisFanTempFirstHigherAlert | 1.3.6.1.4.1.2272.1.85.3.12.1.7 | Gauge32 | read-only | Fan temperature first higher alert |
| DAT rcKhiChassisFanTempFirstHigherAlertTime | 1.3.6.1.4.1.2272.1.85.3.12.1.8 | DateAndTime | read-only | Time at which the fan temperature first higher alert occur |
| KHI rcKhiChassisFanTempStatusIndication | 1.3.6.1.4.1.2272.1.85.3.12.1.9 | KhiStatusValue | read-only | Fan status indication |
| rcKhiChassisFanOperHistoryTable | 1.3.6.1.4.1.2272.1.85.3.13 | not-accessible | Fan table include Fan operational state history info | |
| rcKhiChassisFanOperHistoryEntry | 1.3.6.1.4.1.2272.1.85.3.13.1 | not-accessible | A chassis fan oper state history table entry. | |
| I32 rcKhiChassisFanOperHistoryFanId | 1.3.6.1.4.1.2272.1.85.3.13.1.1 | Integer32 | not-accessible | An unique index used to identify a particular fan in the system. |
| I32 rcKhiChassisFanOperHistoryIndex | 1.3.6.1.4.1.2272.1.85.3.13.1.2 | Integer32 | not-accessible | history index for a particular fan |
| KHI rcKhiChassisFanOperHistoryStateChange | 1.3.6.1.4.1.2272.1.85.3.13.1.3 | KhiStatusValue | read-only | Fan operational state change. Up - Green and Down - Red |
| DAT rcKhiChassisFanOperHistoryStateChangeTime | 1.3.6.1.4.1.2272.1.85.3.13.1.4 | DateAndTime | read-only | Time at which the fan operational state change occur. |
| rcKhiChassisFanTempHistoryTable | 1.3.6.1.4.1.2272.1.85.3.14 | not-accessible | Fan table include Fan temperature history info | |
| rcKhiChassisFanTempHistoryEntry | 1.3.6.1.4.1.2272.1.85.3.14.1 | not-accessible | A chassis fan Temperature history table entry. | |
| I32 rcKhiChassisFanTempHistoryFanId | 1.3.6.1.4.1.2272.1.85.3.14.1.1 | Integer32 | not-accessible | An unique index used to identify a particular fan in the system. |
| I32 rcKhiChassisFanTempHistoryIndex | 1.3.6.1.4.1.2272.1.85.3.14.1.2 | Integer32 | not-accessible | history index for a particular fan |
| KHI rcKhiChassisFanTempHistoryTempStateChange | 1.3.6.1.4.1.2272.1.85.3.14.1.3 | KhiStatusValue | read-only | Fan temperature state change. Green if temperature =41 and =50 |
| DAT rcKhiChassisFanTempHistoryTempStateChangeTime | 1.3.6.1.4.1.2272.1.85.3.14.1.4 | DateAndTime | read-only | Time at which the fan temperature state change occur. |
| rcKhiChassisPowerSupplyTable | 1.3.6.1.4.1.2272.1.85.3.15 | not-accessible | Power Supply table include Power Supply statistics | |
| rcKhiChassisPowerSupplyEntry | 1.3.6.1.4.1.2272.1.85.3.15.1 | not-accessible | A chassis fan table entry. | |
| I32 rcKhiChassisPowerSupplyId | 1.3.6.1.4.1.2272.1.85.3.15.1.1 | Integer32 | not-accessible | An unique index used to identify a particular Power Supply in the system. |
| INT rcKhiChassisPowerSupplyOperState | 1.3.6.1.4.1.2272.1.85.3.15.1.2 | INTEGER | read-only | Power Supply operational state |
| INT rcKhiChassisPowerSupplyFirstStateChange | 1.3.6.1.4.1.2272.1.85.3.15.1.3 | INTEGER | read-only | Power Supply operational state First change after boot or clear. |
| DAT rcKhiChassisPowerSupplyFirstStateChangeTime | 1.3.6.1.4.1.2272.1.85.3.15.1.4 | DateAndTime | read-only | Time at which Power Supply State first change occur. |
| KHI rcKhiChassisPowerSupplyStatusIndication | 1.3.6.1.4.1.2272.1.85.3.15.1.5 | KhiStatusValue | read-only | Power Supply status indication |
| rcKhiChassisPowerSupplyHistoryTable | 1.3.6.1.4.1.2272.1.85.3.16 | not-accessible | Power Supply table include power supply history info | |
| rcKhiChassisPowerSupplyHistoryEntry | 1.3.6.1.4.1.2272.1.85.3.16.1 | not-accessible | A chassis power supply history table entry. | |
| I32 rcKhiChassisPowerSupplyHistoryPSId | 1.3.6.1.4.1.2272.1.85.3.16.1.1 | Integer32 | not-accessible | An unique index used to identify a particular PowerSupply in the system. |
| I32 rcKhiChassisPowerSupplyHistoryIndex | 1.3.6.1.4.1.2272.1.85.3.16.1.2 | Integer32 | not-accessible | history index for a particular power supply |
| KHI rcKhiChassisPowerSupplyHistoryOperStateChange | 1.3.6.1.4.1.2272.1.85.3.16.1.3 | KhiStatusValue | read-only | Power supply operational state change. Green if power supply comes up and Red if it goes down |
| DAT rcKhiChassisPowerSupplyHistoryOperStateChangeTime | 1.3.6.1.4.1.2272.1.85.3.16.1.4 | DateAndTime | read-only | Time at which the power supply operational state change occur. |
| rcKhiChassisLineCardTable | 1.3.6.1.4.1.2272.1.85.3.17 | not-accessible | table include line card statistics | |
| rcKhiChassisLineCardEntry | 1.3.6.1.4.1.2272.1.85.3.17.1 | not-accessible | A chassis line card table entry. | |
| I32 rcKhiChassisLineCardSlot | 1.3.6.1.4.1.2272.1.85.3.17.1.1 | Integer32 | not-accessible | An unique index used to identify a particular slot of line card in the system. |
| INT rcKhiChassisLineCardOperState | 1.3.6.1.4.1.2272.1.85.3.17.1.2 | INTEGER | read-only | Line card operational state |
| ENA rcKhiChassisLineCardAdminState | 1.3.6.1.4.1.2272.1.85.3.17.1.3 | EnableValue | read-only | Line card administrative state |
| KHI rcKhiChassisLineCardFirstStateChange | 1.3.6.1.4.1.2272.1.85.3.17.1.4 | KhiStatusValue | read-only | Line card first operational state change after boot or clear. |
| DAT rcKhiChassisLineCardFirstStateChangeTime | 1.3.6.1.4.1.2272.1.85.3.17.1.5 | DateAndTime | read-only | The time at which line card first operational state change occur. |
| KHI rcKhiChassisLineCardStatusIndication | 1.3.6.1.4.1.2272.1.85.3.17.1.6 | KhiStatusValue | read-only | Line card Status indication |
| rcKhiChassisLineCardHistoryTable | 1.3.6.1.4.1.2272.1.85.3.18 | not-accessible | Line card table include line card history info | |
| rcKhiChassisLineCardHistoryEntry | 1.3.6.1.4.1.2272.1.85.3.18.1 | not-accessible | A chassis line card history table entry. | |
| I32 rcKhiChassisLineCardHistoryLCId | 1.3.6.1.4.1.2272.1.85.3.18.1.1 | Integer32 | not-accessible | An unique index used to identify a particular LineCard in the system. |
| I32 rcKhiChassisLineCardHistoryIndex | 1.3.6.1.4.1.2272.1.85.3.18.1.2 | Integer32 | not-accessible | history index for a particular line card |
| KHI rcKhiChassisLineCardHistoryOperStateChange | 1.3.6.1.4.1.2272.1.85.3.18.1.3 | KhiStatusValue | read-only | Line card operational state change. Green if operationally up. Yellow if operationally down and adminstratively disabled. Red if operationally down and adminstratively enabled |
| DAT rcKhiChassisLineCardHistoryOperStateChangeTime | 1.3.6.1.4.1.2272.1.85.3.18.1.4 | DateAndTime | read-only | Time at which the line card operational state change occur. |
| rcKhiPerformance | 1.3.6.1.4.1.2272.1.85.4 | |||
| G32 rcKhiPerformanceCurrentCpuUtil | 1.3.6.1.4.1.2272.1.85.4.1 | Gauge32 | read-only | Current Percentage of CPU utilization in 5 minutes sampling. Status: Yellow: above 75 Green: below 75 |
| G32 rcKhiPerformanceFirstHigherCpuUtil | 1.3.6.1.4.1.2272.1.85.4.2 | Gauge32 | read-only | FirstHigher Percentage of CPU utilization in 5 minutes sampling. Status: Yellow: above 75 Green: below 75 |
| DAT rcKhiPerformanceCpuUtilFirstHigherAlertTime | 1.3.6.1.4.1.2272.1.85.4.3 | DateAndTime | read-only | Timestamp of the high cpu utilization |
| KHI rcKhiPerformanceCpuUtilStatus | 1.3.6.1.4.1.2272.1.85.4.4 | KhiStatusValue | read-only | the high cpu utilization status |
| G32 rcKhiPerformanceCurrentSwitchFabricUtil | 1.3.6.1.4.1.2272.1.85.4.5 | Gauge32 | read-only | Current Percentage of Switching Fabric utilization |
| G32 rcKhiPerformanceFirstHigherSwitchFabricUtil | 1.3.6.1.4.1.2272.1.85.4.6 | Gauge32 | read-only | FirstHigher Percentage of Switching Fabric utilization |
| DAT rcKhiPerformanceSwitchFabricUtilFirstHigherAlertTime | 1.3.6.1.4.1.2272.1.85.4.7 | DateAndTime | read-only | Timestamp of ciritcal Percentage of Switching Fabric utilization |
| KHI rcKhiPerformanceSwitchFabricUtilStatus | 1.3.6.1.4.1.2272.1.85.4.8 | KhiStatusValue | read-only | Switch Fabric Utilization Status |
| G32 rcKhiPerformanceCurrentOtherSwitchFabricUtil | 1.3.6.1.4.1.2272.1.85.4.9 | Gauge32 | read-only | Current Percentage of Other Switching Fabric utilization |
| G32 rcKhiPerformanceFirstHigherOtherSwitchFabricUtil | 1.3.6.1.4.1.2272.1.85.4.10 | Gauge32 | read-only | FirstHigher Percentage of Other Switching Fabric utilization |
| DAT rcKhiPerformanceOtherSwitchFabricUtilFirstHigherAlertTime | 1.3.6.1.4.1.2272.1.85.4.11 | DateAndTime | read-only | Timestamp of ciritcal percentage of other Switching Fabric utilization |
| KHI rcKhiPerformanceOtherSwitchFabricUtilStatus | 1.3.6.1.4.1.2272.1.85.4.12 | KhiStatusValue | read-only | Other Switch Fabric Utilization Status |
| G32 rcKhiPerformanceCurrentBufferUtil | 1.3.6.1.4.1.2272.1.85.4.13 | Gauge32 | read-only | Current Percentage of buffer utilization |
| G32 rcKhiPerformanceFirstHigherBufferUtil | 1.3.6.1.4.1.2272.1.85.4.14 | Gauge32 | read-only | FirstHigher Percentage of buffer utilization |
| DAT rcKhiPerformanceBufferUtilFirstHigherAlertTime | 1.3.6.1.4.1.2272.1.85.4.15 | DateAndTime | read-only | Timestamp of critical Percentage of buffer utilization |
| KHI rcKhiPerformanceBufferUtilStatus | 1.3.6.1.4.1.2272.1.85.4.16 | KhiStatusValue | read-only | Buffer Utilization Status |
| G32 rcKhiPerformanceCurrentDRamUsed | 1.3.6.1.4.1.2272.1.85.4.17 | Gauge32 | read-only | Current Percentage of used DRAM in Kbytes |
| G32 rcKhiPerformanceFirstHigherDRamUsed | 1.3.6.1.4.1.2272.1.85.4.18 | Gauge32 | read-only | FirstHigher Percentage of used DRAM in Kbytes |
| DAT rcKhiPerformanceDRamUsedFirstHigherAlertTime | 1.3.6.1.4.1.2272.1.85.4.19 | DateAndTime | read-only | Timestamp of ciritcal percentage of used DRAM in Kbytes |
| KHI rcKhiPerformanceDRamUsedStatus | 1.3.6.1.4.1.2272.1.85.4.20 | KhiStatusValue | read-only | Dynamic Random Access Memory Utilization Status |
| KHI rcKhiPerformanceSuspendedTaskStatus | 1.3.6.1.4.1.2272.1.85.4.21 | KhiStatusValue | read-only | Suspended Tasks Status |
| DAT rcKhiPerformanceCPUControlFirstHigherAlertTime | 1.3.6.1.4.1.2272.1.85.4.22 | DateAndTime | read-only | Timestamp of First Higher Alert for CPU Control |
| KHI rcKhiPerformanceCPUControlStatus | 1.3.6.1.4.1.2272.1.85.4.23 | KhiStatusValue | read-only | CPU Control Status |
| G32 rcKhiPerformanceCurrentNoFBuf | 1.3.6.1.4.1.2272.1.85.4.24 | Gauge32 | read-only | Current Number of None free buffer |
| G32 rcKhiPerformanceFirstHigherNoFBuf | 1.3.6.1.4.1.2272.1.85.4.25 | Gauge32 | read-only | FirstHigher Number of None free buffer |
| G32 rcKhiPerformanceCurrentTxPacketsDropped | 1.3.6.1.4.1.2272.1.85.4.26 | Gauge32 | read-only | Current Tx packet dropped |
| G32 rcKhiPerformanceFirstHigherTxPacketsDropped | 1.3.6.1.4.1.2272.1.85.4.27 | Gauge32 | read-only | FirstHigher Tx packet dropped |
| G32 rcKhiPerformanceCurrentOutError | 1.3.6.1.4.1.2272.1.85.4.28 | Gauge32 | read-only | Current Out errors |
| G32 rcKhiPerformanceFirstHigherOutError | 1.3.6.1.4.1.2272.1.85.4.29 | Gauge32 | read-only | FirstHigher Out errors |
| rcKhiPerformanceSuspendedTaskTable | 1.3.6.1.4.1.2272.1.85.4.30 | not-accessible | Suspended tasks table | |
| rcKhiPerformanceSuspendedTaskEntry | 1.3.6.1.4.1.2272.1.85.4.30.1 | not-accessible | Suspeded task table entry. | |
| I32 rcKhiPerformanceSuspendedTaskIndex | 1.3.6.1.4.1.2272.1.85.4.30.1.1 | Integer32 | not-accessible | An unique index used to identify a particular supended task index |
| I32 rcKhiPerformanceSuspendedTaskId | 1.3.6.1.4.1.2272.1.85.4.30.1.2 | Integer32 | read-only | An unique task id of suspeded task |
| STR rcKhiPerformanceSuspendedTaskName | 1.3.6.1.4.1.2272.1.85.4.30.1.3 | DisplayString | read-only | An unique task id of suspeded task |
| DAT rcKhiPerformanceSuspendedTaskSuspendedTime | 1.3.6.1.4.1.2272.1.85.4.30.1.4 | DateAndTime | read-only | Suspeded task time |
| rcKhiPerformanceHistoryTable | 1.3.6.1.4.1.2272.1.85.4.31 | not-accessible | Performance History table | |
| rcKhiPerformanceHistoryEntry | 1.3.6.1.4.1.2272.1.85.4.31.1 | not-accessible | History Performance table entry. | |
| I32 rcKhiPerformanceHistoryIndex | 1.3.6.1.4.1.2272.1.85.4.31.1.1 | Integer32 | not-accessible | An unique index used to identify a particular performance history record |
| G32 rcKhiPerformanceHistoryCpuUtil | 1.3.6.1.4.1.2272.1.85.4.31.1.2 | Gauge32 | read-only | History record for CPU utilization |
| DAT rcKhiPerformanceHistoryCpuUtilTimeStamp | 1.3.6.1.4.1.2272.1.85.4.31.1.3 | DateAndTime | read-only | Timestamp of the historical cpu utilization |
| G32 rcKhiPerformanceHistorySwitchFabricUtil | 1.3.6.1.4.1.2272.1.85.4.31.1.4 | Gauge32 | read-only | History Percentage of Switching Fabric utilization |
| DAT rcKhiPerformanceHistorySwitchFabricUtilTimeStamp | 1.3.6.1.4.1.2272.1.85.4.31.1.5 | DateAndTime | read-only | Timestamp of the historical switch fabric Utilization |
| G32 rcKhiPerformanceHistoryOtherSwitchFabricUtil | 1.3.6.1.4.1.2272.1.85.4.31.1.6 | Gauge32 | read-only | History Percentage of Other Switching Fabric utilization |
| DAT rcKhiPerformanceHistoryOtherSwitchFabricUtilTimeStamp | 1.3.6.1.4.1.2272.1.85.4.31.1.7 | DateAndTime | read-only | Timestamp of the historical other switch fabric Utilization |
| G32 rcKhiPerformanceHistoryBufferUtil | 1.3.6.1.4.1.2272.1.85.4.31.1.8 | Gauge32 | read-only | History Percentage of Buffer utilization |
| DAT rcKhiPerformanceHistoryBufferUtilTimeStamp | 1.3.6.1.4.1.2272.1.85.4.31.1.9 | DateAndTime | read-only | Timestamp of the historical Buffer Utilization |
| G32 rcKhiPerformanceHistoryDRamUsed | 1.3.6.1.4.1.2272.1.85.4.31.1.10 | Gauge32 | read-only | History DRAM Used |
| DAT rcKhiPerformanceHistoryDRamUsedTimeStamp | 1.3.6.1.4.1.2272.1.85.4.31.1.11 | DateAndTime | read-only | Timestamp of the historical DRAM Used |
| DAT rcKhiPerformanceHistoryCPUControlTimeStamp | 1.3.6.1.4.1.2272.1.85.4.31.1.12 | DateAndTime | read-only | Timestamp of the historical CPU Control |
| G32 rcKhiPerformanceHistoryNoFBuf | 1.3.6.1.4.1.2272.1.85.4.31.1.13 | Gauge32 | read-only | History Number of None Free Buffer |
| G32 rcKhiPerformanceHistoryTxPacketsDropped | 1.3.6.1.4.1.2272.1.85.4.31.1.14 | Gauge32 | read-only | History Tx Packets Dropped |
| G32 rcKhiPerformanceHistoryOutError | 1.3.6.1.4.1.2272.1.85.4.31.1.15 | Gauge32 | read-only | History Out Errors |
| rcKhiPort | 1.3.6.1.4.1.2272.1.85.5 | |||
| rcKhiPortSystemStats | 1.3.6.1.4.1.2272.1.85.5.1 | |||
| C64 rcKhiPortSystemStatsTotalUnicastRxPkts | 1.3.6.1.4.1.2272.1.85.5.1.1 | Counter64 | read-only | Total number of received Unicast packets within the past 2 minutes. |
| C64 rcKhiPortSystemStatsTotalUnicastTxPkts | 1.3.6.1.4.1.2272.1.85.5.1.2 | Counter64 | read-only | Total number of transmitted Unicast packets within the past 2 minutes. |
| I32 rcKhiPortSystemStatsUnicastPktsTxRxRatio | 1.3.6.1.4.1.2272.1.85.5.1.3 | Integer32 | read-only | Tx/Rx Ratio for Total Unicast Packets within the past 2 minutes. |
| KHI rcKhiPortSystemStatsUnicastPktsTxRxRatioHealthStatus | 1.3.6.1.4.1.2272.1.85.5.1.4 | KhiStatusValue | read-only | Health Indication for Unicast Packets Tx/Rx ratio. Green if the ratio is less than 5%. Yellow if it is between 5% and 50%. Red if it is greater than 50%. |
| C64 rcKhiPortSystemStatsTotalMulticastRxPkts | 1.3.6.1.4.1.2272.1.85.5.1.5 | Counter64 | read-only | Total number of received Multicast packets within the past 2 minutes. |
| C64 rcKhiPortSystemStatsTotalMulticastTxPkts | 1.3.6.1.4.1.2272.1.85.5.1.6 | Counter64 | read-only | Total number of transmitted Multicast packets within the past 2 minutes. |
| C64 rcKhiPortSystemStatsTotalBroadcastRxPkts | 1.3.6.1.4.1.2272.1.85.5.1.7 | Counter64 | read-only | Total number of received Broadcast packets within the past 2 minutes. |
| C64 rcKhiPortSystemStatsTotalBroadcastTxPkts | 1.3.6.1.4.1.2272.1.85.5.1.8 | Counter64 | read-only | Total number of transmitted Broadcast packets within the past 2 minutes. |
| rcKhiPortState | 1.3.6.1.4.1.2272.1.85.5.2 | |||
| I32 rcKhiPortStateTotalPortsUp | 1.3.6.1.4.1.2272.1.85.5.2.1 | Integer32 | read-only | Total number of ports that are administratively enabled and operationally up. |
| POR rcKhiPortStatePortsUpList | 1.3.6.1.4.1.2272.1.85.5.2.2 | PortSet | read-only | List of ports that are administratively enabled and operationally up. |
| POR rcKhiPortStatePortsUpReferenceList | 1.3.6.1.4.1.2272.1.85.5.2.3 | PortSet | read-only | Reference list of ports that are administratively enabled and operationally up. |
| KHI rcKhiPortStatePortsUpHealthStatus | 1.3.6.1.4.1.2272.1.85.5.2.4 | KhiStatusValue | read-only | Health Indication for Ports Up list. When a clear operation is issued, rcKhiPortStatePortsUpList is copied into rcKhiPortStatePortsUpReferenceList and will be used as a reference to indicate health. From that point onwards, if rcKhiPortStatePortsUpList does not match rcKhiPortStatePortsUpReferenceList, the health would be indicated as Yellow. If it matches, it would be Green. |
| I32 rcKhiPortStateTotalPortsDown | 1.3.6.1.4.1.2272.1.85.5.2.5 | Integer32 | read-only | Total number of ports that are administratively enabled and operationally down. |
| POR rcKhiPortStatePortsDownList | 1.3.6.1.4.1.2272.1.85.5.2.6 | PortSet | read-only | List of ports that are administratively enabled and operationally down. |
| I32 rcKhiPortStateTotalSmltPortsUp | 1.3.6.1.4.1.2272.1.85.5.2.7 | Integer32 | read-only | Total number of SMLT ports that are administratively enabled and operationally up. |
| POR rcKhiPortStateSmltPortsUpList | 1.3.6.1.4.1.2272.1.85.5.2.8 | PortSet | read-only | List of SMLT ports that are administratively enabled and operationally up. |
| POR rcKhiPortStateSmltPortsUpReferenceList | 1.3.6.1.4.1.2272.1.85.5.2.9 | PortSet | read-only | Reference list of SMLT ports that are administratively enabled and operationally up. |
| KHI rcKhiPortStateSmltPortsUpHealthStatus | 1.3.6.1.4.1.2272.1.85.5.2.10 | KhiStatusValue | read-only | Health Indication for Ports Up list. When a clear operation is issued, rcKhiPortStateSmltPortsUpList is copied into rcKhiPortStateSmltPortsUpReferenceList and will be used as a reference to indicate health. From that point onwards, if rcKhiPortStatSmltePortsUpList does not match rcKhiPortStateSmltPortsUpReferenceList, the health would be indicated as Yellow. If it matches, it would be Green. |
| I32 rcKhiPortStateTotalSmltPortsDown | 1.3.6.1.4.1.2272.1.85.5.2.11 | Integer32 | read-only | Total number of SMLT ports that are administratively enabled and operationally down. |
| POR rcKhiPortStateSmltPortsDownList | 1.3.6.1.4.1.2272.1.85.5.2.12 | PortSet | read-only | List of SMLT ports that are administratively enabled and operationally down. |
| I32 rcKhiPortStateTotalIstPortsUp | 1.3.6.1.4.1.2272.1.85.5.2.13 | Integer32 | read-only | Total number of IST ports that are administratively enabled and operationally up. |
| POR rcKhiPortStateIstPortsUpList | 1.3.6.1.4.1.2272.1.85.5.2.14 | PortSet | read-only | List of IST ports that are administratively enabled and operationally up. |
| POR rcKhiPortStateIstPortsUpReferenceList | 1.3.6.1.4.1.2272.1.85.5.2.15 | PortSet | read-only | Reference list of IST ports that are administratively enabled and operationally up. |
| KHI rcKhiPortStateIstPortsUpHealthStatus | 1.3.6.1.4.1.2272.1.85.5.2.16 | KhiStatusValue | read-only | Health Indication for Ports Up list. When a clear operation is issued, rcKhiPortStateIstPortsUpList is copied into rcKhiPortStateIstPortsUpReferenceList and will be used as a reference to indicate health. From that point onwards, if rcKhiPortStateIstPortsUpList does not match rcKhiPortStateIstPortsUpReferenceList, the health would be indicated as Yellow. If it matches, it would be Green. |
| I32 rcKhiPortStateTotalIstPortsDown | 1.3.6.1.4.1.2272.1.85.5.2.17 | Integer32 | read-only | Total number of IST ports that are administratively enabled and operationally down. |
| POR rcKhiPortStateIstPortsDownList | 1.3.6.1.4.1.2272.1.85.5.2.18 | PortSet | read-only | List of IST ports that are administratively enabled and operationally down. |
| I32 rcKhiPortStateTotalPortUpEvents | 1.3.6.1.4.1.2272.1.85.5.2.19 | Integer32 | read-only | Total number of port up events. |
| POR rcKhiPortStatePortUpEventList | 1.3.6.1.4.1.2272.1.85.5.2.20 | PortSet | read-only | List of ports that became operationally up. |
| KHI rcKhiPortStatePortUpEventsHealthStatus | 1.3.6.1.4.1.2272.1.85.5.2.21 | KhiStatusValue | read-only | Port Up Events Health Indication. |
| DAT rcKhiPortStatePortUpEventFirstEventTs | 1.3.6.1.4.1.2272.1.85.5.2.22 | DateAndTime | read-only | Timestamp of the first occurence of a port up event after reboot or clear. |
| I32 rcKhiPortStateTotalPortDownEvents | 1.3.6.1.4.1.2272.1.85.5.2.23 | Integer32 | read-only | Total number of port down events. |
| POR rcKhiPortStatePortDownEventList | 1.3.6.1.4.1.2272.1.85.5.2.24 | PortSet | read-only | List of ports that became operationally down. |
| KHI rcKhiPortStatePortDownEventsHealthStatus | 1.3.6.1.4.1.2272.1.85.5.2.25 | KhiStatusValue | read-only | Port Down Events Health Indication. |
| DAT rcKhiPortStatePortDownEventFirstEventTs | 1.3.6.1.4.1.2272.1.85.5.2.26 | DateAndTime | read-only | Timestamp of the first occurence of a port down event after reboot or clear. |
| I32 rcKhiPortStateTotalSmltPortUpEvents | 1.3.6.1.4.1.2272.1.85.5.2.27 | Integer32 | read-only | Total number of SMLT port up events. |
| POR rcKhiPortStateSmltPortUpEventList | 1.3.6.1.4.1.2272.1.85.5.2.28 | PortSet | read-only | List of SMLT ports that became operationally up. |
| KHI rcKhiPortStateSmltPortUpEventsHealthStatus | 1.3.6.1.4.1.2272.1.85.5.2.29 | KhiStatusValue | read-only | SMLT Port Up Events Health Indication. |
| DAT rcKhiPortStateSmltPortUpEventFirstEventTs | 1.3.6.1.4.1.2272.1.85.5.2.30 | DateAndTime | read-only | Timestamp of the first occurence of a SMLT port up event after reboot or clear. |
| I32 rcKhiPortStateTotalSmltPortDownEvents | 1.3.6.1.4.1.2272.1.85.5.2.31 | Integer32 | read-only | Total number of SMLT port down events. |
| POR rcKhiPortStateSmltPortDownEventList | 1.3.6.1.4.1.2272.1.85.5.2.32 | PortSet | read-only | List of SMLT ports that became operationally down. |
| KHI rcKhiPortStateSmltPortDownEventsHealthStatus | 1.3.6.1.4.1.2272.1.85.5.2.33 | KhiStatusValue | read-only | SMLT Port Down Events Health Indication. |
| DAT rcKhiPortStateSmltPortDownEventFirstEventTs | 1.3.6.1.4.1.2272.1.85.5.2.34 | DateAndTime | read-only | Timestamp of the first occurence of an SMLT port down event after reboot or clear. |
| I32 rcKhiPortStateTotalIstPortUpEvents | 1.3.6.1.4.1.2272.1.85.5.2.35 | Integer32 | read-only | Total number of SMLT port up events. |
| POR rcKhiPortStateIstPortUpEventList | 1.3.6.1.4.1.2272.1.85.5.2.36 | PortSet | read-only | List of SMLT ports that became operationally up. |
| KHI rcKhiPortStateIstPortUpEventsHealthStatus | 1.3.6.1.4.1.2272.1.85.5.2.37 | KhiStatusValue | read-only | IST Port Up Events Health Indication. |
| DAT rcKhiPortStateIstPortUpEventFirstEventTs | 1.3.6.1.4.1.2272.1.85.5.2.38 | DateAndTime | read-only | Timestamp of the first occurence of a IST port up event after reboot or clear. |
| I32 rcKhiPortStateTotalIstPortDownEvents | 1.3.6.1.4.1.2272.1.85.5.2.39 | Integer32 | read-only | Total number of SMLT port down events. |
| POR rcKhiPortStateIstPortDownEventList | 1.3.6.1.4.1.2272.1.85.5.2.40 | PortSet | read-only | List of SMLT ports that became operationally down. |
| KHI rcKhiPortStateIstPortDownEventsHealthStatus | 1.3.6.1.4.1.2272.1.85.5.2.41 | KhiStatusValue | read-only | IST Port Down Events Health Indication. |
| DAT rcKhiPortStateIstPortDownEventFirstEventTs | 1.3.6.1.4.1.2272.1.85.5.2.42 | DateAndTime | read-only | Timestamp of the first occurence of an IST port down event after reboot or clear. |
| rcKhiPortStateEventsHistoryTable | 1.3.6.1.4.1.2272.1.85.5.2.43 | not-accessible | Port State Events Historical Data. | |
| rcKhiPortStateEventsHistoryEntry | 1.3.6.1.4.1.2272.1.85.5.2.43.1 | not-accessible | Port State Events history table entry. | |
| INT rcKhiPortStateEventsHistoryIndex | 1.3.6.1.4.1.2272.1.85.5.2.43.1.1 | INTEGER | not-accessible | Historical data index number. |
| DAT rcKhiPortStateEventsHistoryTimestamp | 1.3.6.1.4.1.2272.1.85.5.2.43.1.2 | DateAndTime | read-only | Timestamp indicating when the event occurred. |
| INT rcKhiPortStateEventsHistoryPort | 1.3.6.1.4.1.2272.1.85.5.2.43.1.3 | INTEGER | read-only | Port number where the event occurred. |
| INT rcKhiPortStateEventsHistoryEvent | 1.3.6.1.4.1.2272.1.85.5.2.43.1.4 | INTEGER | read-only | Indication about the event-type. |
| rcKhiPortErrors | 1.3.6.1.4.1.2272.1.85.5.3 | |||
| rcKhiPortErrorsEventsTable | 1.3.6.1.4.1.2272.1.85.5.3.1 | not-accessible | Port Error Events Data. | |
| rcKhiPortErrorsEventsEntry | 1.3.6.1.4.1.2272.1.85.5.3.1.1 | not-accessible | Port error events table entry. | |
| INT rcKhiPortErrorsEventsPortNum | 1.3.6.1.4.1.2272.1.85.5.3.1.1.1 | INTEGER | read-only | Port number where the event occurred. |
| KHI rcKhiPortErrorsEventsSingleCollisionErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.2 | KhiStatusValue | read-only | Health Indication for Single Collisions errors on the port. |
| KHI rcKhiPortErrorsEventsMultipleCollisionErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.3 | KhiStatusValue | read-only | Health Indication for Multiple Collisions errors on the port. |
| KHI rcKhiPortErrorsEventsLateCollisionErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.4 | KhiStatusValue | read-only | Health Indication for Late Collisions errors on the port. |
| KHI rcKhiPortErrorsEventsExcessiveCollisionErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.5 | KhiStatusValue | read-only | Health Indication for Excessive Collisions errors on the port. |
| KHI rcKhiPortErrorsEventsMacRxErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.6 | KhiStatusValue | read-only | Health Indication for Mac Rx errors on the port. |
| KHI rcKhiPortErrorsEventsMacTxErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.7 | KhiStatusValue | read-only | Health Indication for Mac Tx errors on the port. |
| KHI rcKhiPortErrorsEventsDeferTxErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.8 | KhiStatusValue | read-only | Health Indication for Defer Tx errors on the port. |
| KHI rcKhiPortErrorsEventsPacketErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.9 | KhiStatusValue | read-only | Health Indication for Packet errors on the port. |
| KHI rcKhiPortErrorsEventsLinkInactiveErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.10 | KhiStatusValue | read-only | Health Indication for Link Inactive errors on the port. |
| KHI rcKhiPortErrorsEventsUnknownProtoErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.11 | KhiStatusValue | read-only | Health Indication for Unknown Proto errors on the port. |
| KHI rcKhiPortErrorsEventsInFlwctrlErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.12 | KhiStatusValue | read-only | Health Indication for In Flwctrl errors on the port. |
| KHI rcKhiPortErrorsEventsOutFlwctrlErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.13 | KhiStatusValue | read-only | Health Indication for Out Flwctrl errors on the port. |
| KHI rcKhiPortErrorsEventsAlignErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.14 | KhiStatusValue | read-only | Health Indication for Align errors on the port. |
| KHI rcKhiPortErrorsEventsFCSErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.15 | KhiStatusValue | read-only | Health Indication for FCS errors on the port. |
| KHI rcKhiPortErrorsEventsFramesLongErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.16 | KhiStatusValue | read-only | Health Indication for Frames Long errors on the port. |
| KHI rcKhiPortErrorsEventsTooShortErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.17 | KhiStatusValue | read-only | Health Indication for Too Short errors on the port. |
| KHI rcKhiPortErrorsEventsLinkFailureErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.18 | KhiStatusValue | read-only | Health Indication for Link Failure errors on the port. |
| KHI rcKhiPortErrorsEventsCarrierSenseErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.19 | KhiStatusValue | read-only | Health Indication for Carrier Sense errors on the port. |
| KHI rcKhiPortErrorsEventsCarrierErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.20 | KhiStatusValue | read-only | Health Indication for Carrier errors on the port. |
| KHI rcKhiPortErrorsEventsSQETestErr | 1.3.6.1.4.1.2272.1.85.5.3.1.1.21 | KhiStatusValue | read-only | Health Indication for SQE Test errors on the port. |
| rcKhiPortErrorsHistoryTable | 1.3.6.1.4.1.2272.1.85.5.3.2 | not-accessible | Port Errors Historical Data. | |
| rcKhiPortErrorsHistoryEntry | 1.3.6.1.4.1.2272.1.85.5.3.2.1 | not-accessible | Port errors history table entry. | |
| INT rcKhiPortErrorsHistoryIndex | 1.3.6.1.4.1.2272.1.85.5.3.2.1.1 | INTEGER | not-accessible | Index number. |
| DAT rcKhiPortErrorsHistoryTimestamp | 1.3.6.1.4.1.2272.1.85.5.3.2.1.2 | DateAndTime | read-only | Timestamp indicating when the event occurred. |
| INT rcKhiPortErrorsHistoryPort | 1.3.6.1.4.1.2272.1.85.5.3.2.1.3 | INTEGER | read-only | Port number where the event occurred. |
| BIT rcKhiPortErrorsHistoryErrorEvents | 1.3.6.1.4.1.2272.1.85.5.3.2.1.4 | Bits | read-only | This is used to specify the port error information. bit 0 - Single Collision Errors bit 1 - Multiple Collision Errors bit 2 - Late Collision Errors bit 3 - Excessive Collision Errors bit 4 - Mac Rx Errors bit 5 - Mac Tx Errors bit 6 - Defer Tx Errors bit 7 - Packet Errors bit 8 - Link Inactive Errors bit 9 - Unknown Proto Errors bit 10 - In Flwctrl Errors bit 11 - Out Flwctrl Errors bit 12 - Align Errors bit 13 - FCS Errors bit 14 - Frames Long Errors bit 15 - Too Short Errors bit 16 - Link Failure Errors bit 17 - Carrier Sense Errors bit 18 - Carrier Errors bit 19 - SQE Test Errors |
| rcKhiForwarding | 1.3.6.1.4.1.2272.1.85.6 | |||
| rcKhiForwardingAsicHealthTable | 1.3.6.1.4.1.2272.1.85.6.1 | not-accessible | Forwarding Asic Key Health Indicator MIB. | |
| rcKhiForwardingAsicHealthEntry | 1.3.6.1.4.1.2272.1.85.6.1.1 | not-accessible | Forwarding KHI - Asic Health table entry. | |
| INT rcKhiForwardingAsicHealthSlotNumber | 1.3.6.1.4.1.2272.1.85.6.1.1.1 | INTEGER | not-accessible | Slot Number. |
| I32 rcKhiForwardingAsicHealthLeftLnIngBkPrsureRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.2 | Integer32 | read-only | Total number of Left Lane Ingress RSP Combined Back Pressure Resets. |
| I32 rcKhiForwardingAsicHealthMidLnIngBkPrsureRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.3 | Integer32 | read-only | Total number of Middle Lane Ingress RSP Combined Back Pressure Resets. |
| I32 rcKhiForwardingAsicHealthRightLnIngBkPrsureRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.4 | Integer32 | read-only | Total number of Right Lane Ingress RSP Combined Back Pressure Resets. |
| KHI rcKhiForwardingAsicHealthLeftLnIngBkPrsureRstStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.5 | KhiStatusValue | read-only | Left Lane Ingress RSP Back Pressure Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingAsicHealthMidLnIngBkPrsureRstStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.6 | KhiStatusValue | read-only | Middle Lane ngress RSP Back Pressure Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingAsicHealthRightLnIngBkPrsureRstStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.7 | KhiStatusValue | read-only | Right Lane Ingress RSP Back Pressure Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| I32 rcKhiForwardingAsicHealthLeftLnIngSPIProtoRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.8 | Integer32 | read-only | Total number of Left Lane Ingress RSP SPI Protocol Resets. |
| I32 rcKhiForwardingAsicHealthMidLnIngSPIProtoRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.9 | Integer32 | read-only | Total number of Middle Lane Ingress RSP SPI Protocol Resets. |
| I32 rcKhiForwardingAsicHealthRightLnIngSPIProtoRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.10 | Integer32 | read-only | Total number of Right Lane Ingress RSP SPI Protocol Resets. |
| KHI rcKhiForwardingAsicHealthLeftLnIngSPIProtoRstStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.11 | KhiStatusValue | read-only | Left Lane Ingress RSP SPI Protocol Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingAsicHealthMidLnIngSPIProtoRstStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.12 | KhiStatusValue | read-only | Middle Lane Ingress RSP SPI Protocol Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingAsicHealthRightLnIngSPIProtoRstStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.13 | KhiStatusValue | read-only | Right Lane Ingress RSP SPI Protocol Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| I32 rcKhiForwardingAsicHealthLeftLnIngSPIDefragCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.14 | Integer32 | read-only | Total number of Left Lane Ingress RSP SPI Defrag Resets. |
| I32 rcKhiForwardingAsicHealthMidLnIngSPIDefragCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.15 | Integer32 | read-only | Total number of Middle Lane Ingress RSP SPI Defrag Resets. |
| I32 rcKhiForwardingAsicHealthRightLnIngSPIDefragCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.16 | Integer32 | read-only | Total number of Right Lane Ingress RSP SPI Defrag Resets. |
| KHI rcKhiForwardingAsicHealthLeftLnIngSPIDefragStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.17 | KhiStatusValue | read-only | Left Lane Ingress RSP SPI Defrag Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingAsicHealthMidLnIngSPIDefragStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.18 | KhiStatusValue | read-only | Middle Lane Ingress RSP SPI Defrag Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingAsicHealthRightLnIngSPIDefragStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.19 | KhiStatusValue | read-only | Right Lane Ingress RSP SPI Defrag Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| I32 rcKhiForwardingAsicHealthLeftLnEgrMcastQFullRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.20 | Integer32 | read-only | Total number of Left Lane Egress RSP Multicast Queue Full Resets. |
| I32 rcKhiForwardingAsicHealthMidLnEgrMcastQFullRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.21 | Integer32 | read-only | Total number of Middle Lane Egress RSP Multicast Queue Full Resets. |
| I32 rcKhiForwardingAsicHealthRightLnEgrMcastQFullRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.22 | Integer32 | read-only | Total number of Right Lane Egress RSP Multicast Queue Full Resets. |
| KHI rcKhiForwardingAsicHealthLeftLnEgrMcastQFullRstStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.23 | KhiStatusValue | read-only | Left Lane Egress RSP Multicast Queue Full Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingAsicHealthMidLnEgrMcastQFullRstStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.24 | KhiStatusValue | read-only | Middle Lane Egress RSP Multicast Queue Full Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingAsicHealthRightLnEgrMcastQFullRstStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.25 | KhiStatusValue | read-only | Right Lane Egress RSP Multicast Queue Full Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| I32 rcKhiForwardingAsicHealthLeftLnEgrFreePgErrRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.26 | Integer32 | read-only | Total number of Left Lane Egress RSP Free Page Error Resets. |
| I32 rcKhiForwardingAsicHealthMidLnEgrFreePgErrRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.27 | Integer32 | read-only | Total number of Middle Lane Egress RSP Free Page Error Resets. |
| I32 rcKhiForwardingAsicHealthRightLnEgrFreePgErrRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.28 | Integer32 | read-only | Total number of Right Lane Egress RSP Free Page Error Resets. |
| KHI rcKhiForwardingAsicHealthLeftLnEgrFreePgErrRstStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.29 | KhiStatusValue | read-only | Left Lane Egress RSP Free Page Error Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingAsicHealthMidLnEgrFreePgErrRstStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.30 | KhiStatusValue | read-only | Middle Lane Egress RSP Free Page Error Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingAsicHealthRightLnEgrFreePgErrRstStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.31 | KhiStatusValue | read-only | Left Lane Egress RSP Free Page Error Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| I32 rcKhiForwardingAsicHealthLeftLnEgrUcastQFullRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.32 | Integer32 | read-only | Total number of Left Lane Egress RSP Unicast Queue Full Resets. |
| I32 rcKhiForwardingAsicHealthMidLnEgrUcastQFullRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.33 | Integer32 | read-only | Total number of Middle Lane Egress RSP Unicast Queue Full Resets. |
| I32 rcKhiForwardingAsicHealthRightLnEgrUcastQFullRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.34 | Integer32 | read-only | Total number of Right Lane Egress RSP Unicast Queue Full Resets. |
| KHI rcKhiForwardingAsicHealthLeftLnEgrUcastQFullRstStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.35 | KhiStatusValue | read-only | Left Lane Egress RSP Unicast Queue Full Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingAsicHealthMidLnEgrUcastQFullRstStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.36 | KhiStatusValue | read-only | Middle Lane Egress RSP Unicast Queue Full Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingAsicHealthRightLnEgrUcastQFullRstStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.37 | KhiStatusValue | read-only | Right Lane Egress RSP Unicast Queue Full Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| I32 rcKhiForwardingAsicHealthLeftLnEgrFreePgLwrLmtRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.39 | Integer32 | read-only | Total number of Left Lane Egress RSP Free Pages at Lower Limit Resets. |
| I32 rcKhiForwardingAsicHealthMidLnEgrFreePgLwrLmtRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.40 | Integer32 | read-only | Total number of Middle Lane Egress RSP Free Pages at Lower Limit Resets. |
| I32 rcKhiForwardingAsicHealthRightLnEgrFreePgLwrLmtRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.41 | Integer32 | read-only | Total number of Right Lane Egress RSP Free Pages at Lower Limit Resets. |
| KHI rcKhiForwardingAsicHealthLeftLnEgrFreePgLwrLmtStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.42 | KhiStatusValue | read-only | Left Lane Egress RSP Free Pages at Lower Limit Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingAsicHealthMidLnEgrFreePgLwrLmtStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.43 | KhiStatusValue | read-only | Middle Lane Egress RSP Free Pages at Lower Limit Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingAsicHealthRightLnEgrFreePgLwrLmtStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.44 | KhiStatusValue | read-only | Right Lane Egress RSP Free Pages at Lower Limit Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| I32 rcKhiForwardingAsicHealthLeftLnEgrRepIDMismatchRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.45 | Integer32 | read-only | Total number of Left Lane Egress RSP Replication ID Mismatch Resets. |
| I32 rcKhiForwardingAsicHealthMidLnEgrRepIDMismatchRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.46 | Integer32 | read-only | Total number of Middle Lane Egress RSP Replication ID Mismatch Resets. |
| I32 rcKhiForwardingAsicHealthRightLnEgrRepIDMismatchRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.47 | Integer32 | read-only | Total number of Right Lane Egress RSP Replication ID Mismatch Resets. |
| KHI rcKhiForwardingAsicHealthLeftLnEgrRepIDMismatchStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.48 | KhiStatusValue | read-only | Left Lane Egress RSP Replication ID Mismatch Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingAsicHealthMidLnEgrRepIDMismatchStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.49 | KhiStatusValue | read-only | Middle Lane Egress RSP Replication ID Mismatch Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingAsicHealthRightLnEgrRepIDMismatchStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.50 | KhiStatusValue | read-only | Right Lane Egress RSP Replication ID Mismatch Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| I32 rcKhiForwardingAsicHealthLeftLnEgrNoBeepBeepRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.51 | Integer32 | read-only | Total number of Left Lane Egress RSP No Beep-Beep Resets. |
| I32 rcKhiForwardingAsicHealthMidLnEgrNoBeepBeepRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.52 | Integer32 | read-only | Total number of Middle Lane Egress RSP No Beep-Beep Resets. |
| I32 rcKhiForwardingAsicHealthRightLnEgrNoBeepBeepRstCnt | 1.3.6.1.4.1.2272.1.85.6.1.1.53 | Integer32 | read-only | Total number of Right Lane Egress RSP No Beep-Beep Resets. |
| KHI rcKhiForwardingAsicHealthLeftLnEgrNoBeepBeepStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.54 | KhiStatusValue | read-only | Left Lane Egress RSP No Beep-Beep Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingAsicHealthMidLnEgrNoBeepBeepStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.55 | KhiStatusValue | read-only | Middle Lane Egress RSP No Beep-Beep Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingAsicHealthRightLnEgrNoBeepBeepStatus | 1.3.6.1.4.1.2272.1.85.6.1.1.56 | KhiStatusValue | read-only | Right Lane Egress RSP No Beep-Beep Resets Health Indication. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| rcKhiForwardingRSPStateTable | 1.3.6.1.4.1.2272.1.85.6.2 | not-accessible | Forwarding Key Health Indicator MIB - RSP Stats. | |
| rcKhiForwardingRSPStateEntry | 1.3.6.1.4.1.2272.1.85.6.2.1 | not-accessible | Forwarding KHI - RSP State table entry. | |
| INT rcKhiForwardingRSPStateSlotNumber | 1.3.6.1.4.1.2272.1.85.6.2.1.1 | INTEGER | not-accessible | Slot Number. |
| INT rcKhiForwardingRSPStateDirection | 1.3.6.1.4.1.2272.1.85.6.2.1.2 | INTEGER | not-accessible | Direction - Ingress or Egress. |
| BIT rcKhiForwardingRSPStateLeftLnErrMask | 1.3.6.1.4.1.2272.1.85.6.2.1.3 | Bits | read-only | Left Lane RSP State Error Bit Mask. Each bit in the mask represents a specific error. Bit 0 - CIF Parity Error. Bit 1 - CIF Protocol Error. Bit 2 - EME0 Parity Error. Bit 3 - EME1 Parity Error. Bit 4 - BAP Host Read Error. Bit 5 - BAP Host Write Error. Bit 6 - BAP Clock PLL is not locked. Bit 7 - BAP Tx Clock PLL is not locked. Bit 8 - BAP Memory Clock PLL is not locked. Bit 9 - GAB Error. Bit 10 - BAP Intf Timeout. Bit 11 - BAP Intf Error. Bit 12 - BAP Decoder Error. Bit 13 - BAP Decoder Special Access Error. Bit 14 - BAP Controller Write Error. Bit 15 - BAP Controller Read Error. Bit 16 - BAP GAB Error. Bit 17 - IME0 is disabled. Bit 18 - IME1 is disabled. Bit 19 - Hash engine is disabled. Bit 20 - Multiplication Engine is disabled. Bit 21 - FDIB Empty Pkt. Wrong PTM access. Bit 22 - FDIB Past End of Pkt Error. Bit 23 - FDIB Fifo empty. Wrong PM access. Bit 24 - FDIB Invalid Page. Bit 25 - Fifo Full. Bit 26 - FDIB Mixed access. Bit 27 - FDOB PM Error. Bit 28 - FDOB is Full. Bit 29 - FDOB is empty. Bit 30 - PTM Bus Error. Bit 31 - PM Program Counter Error. Bit 32 - PM Stats BUS Error. Bit 33 - PM FDIB HPI BUS Error. Bit 34 - PM EME1 Parity Error. Bit 35 - PM EME0 Parity Error. Bit 36 - PM Multicast Error. Bit 37 - PM Frame Error. Bit 38 - PM Pop rollover. Bit 39 - PM Release Error. Bit 40 - AM Unsupported optype for region/device exception. Bit 41 - AM Illegal region/subregion exception. Bit 42 - AM Search run on exception. Bit 43 - AM Search bus error exception. Bit 44 - AM Parity error exception. Bit 45 - AM Protocol error exception. Bit 46 - AM Illegal Argument exception. Bit 47 - AM Non-alligned address exception. Bit 48 - AM Packet memory bus error exception. Bit 49 - AM Packet header address error exception. Bit 50 - AM Lookup Continue Zero exception. Bit 51 - AM Unsupported RSVD8 exception. Bit 52 - AM Unsupported RSVD10 exception. Bit 53 - AM Unsupported RSVD1 exception. Bit 54 - AM Unsupported RSVD2 exception. Bit 55 - AM Unsupported RSVD3 exception. Bit 56 - AM Unsupported RSVD4 exception. Bit 57 - AM Unsupported RSVD5 exception. Bit 58 - AM Unsupported Unknown h/w failure exception. Bit 59 - AM Software Interrupt. Bit 60 - Missing RSP Heartbeats. |
| BIT rcKhiForwardingRSPStateMidLnErrMask | 1.3.6.1.4.1.2272.1.85.6.2.1.4 | Bits | read-only | Middle Lane RSP State Error Bit Mask. Each bit in the mask represents a specific error. Bit 0 - CIF Parity Error. Bit 1 - CIF Protocol Error. Bit 2 - EME0 Parity Error. Bit 3 - EME1 Parity Error. Bit 4 - BAP Host Read Error. Bit 5 - BAP Host Write Error. Bit 6 - BAP Clock PLL is not locked. Bit 7 - BAP Tx Clock PLL is not locked. Bit 8 - BAP Memory Clock PLL is not locked. Bit 9 - GAB Error. Bit 10 - BAP Intf Timeout. Bit 11 - BAP Intf Error. Bit 12 - BAP Decoder Error. Bit 13 - BAP Decoder Special Access Error. Bit 14 - BAP Controller Write Error. Bit 15 - BAP Controller Read Error. Bit 16 - BAP GAB Error. Bit 17 - IME0 is disabled. Bit 18 - IME1 is disabled. Bit 19 - Hash engine is disabled. Bit 20 - Multiplication Engine is disabled. Bit 21 - FDIB Empty Pkt. Wrong PTM access. Bit 22 - FDIB Past End of Pkt Error. Bit 23 - FDIB Fifo empty. Wrong PM access. Bit 24 - FDIB Invalid Page. Bit 25 - Fifo Full. Bit 26 - FDIB Mixed access. Bit 27 - FDOB PM Error. Bit 28 - FDOB is Full. Bit 29 - FDOB is empty. Bit 30 - PTM Bus Error. Bit 31 - PM Program Counter Error. Bit 32 - PM Stats BUS Error. Bit 33 - PM FDIB HPI BUS Error. Bit 34 - PM EME1 Parity Error. Bit 35 - PM EME0 Parity Error. Bit 36 - PM Multicast Error. Bit 37 - PM Frame Error. Bit 38 - PM Pop rollover. Bit 39 - PM Release Error. Bit 40 - AM Unsupported optype for region/device exception. Bit 41 - AM Illegal region/subregion exception. Bit 42 - AM Search run on exception. Bit 43 - AM Search bus error exception. Bit 44 - AM Parity error exception. Bit 45 - AM Protocol error exception. Bit 46 - AM Illegal Argument exception. Bit 47 - AM Non-alligned address exception. Bit 48 - AM Packet memory bus error exception. Bit 49 - AM Packet header address error exception. Bit 50 - AM Lookup Continue Zero exception. Bit 51 - AM Unsupported RSVD8 exception. Bit 52 - AM Unsupported RSVD10 exception. Bit 53 - AM Unsupported RSVD1 exception. Bit 54 - AM Unsupported RSVD2 exception. Bit 55 - AM Unsupported RSVD3 exception. Bit 56 - AM Unsupported RSVD4 exception. Bit 57 - AM Unsupported RSVD5 exception. Bit 58 - AM Unsupported Unknown h/w failure exception. Bit 59 - AM Software Interrupt. Bit 60 - Missing RSP Heartbeats. |
| BIT rcKhiForwardingRSPStateRightLnErrMask | 1.3.6.1.4.1.2272.1.85.6.2.1.5 | Bits | read-only | Right Lane RSP State Error Bit Mask. Each bit in the mask represents a specific error. Bit 0 - CIF Parity Error. Bit 1 - CIF Protocol Error. Bit 2 - EME0 Parity Error. Bit 3 - EME1 Parity Error. Bit 4 - BAP Host Read Error. Bit 5 - BAP Host Write Error. Bit 6 - BAP Clock PLL is not locked. Bit 7 - BAP Tx Clock PLL is not locked. Bit 8 - BAP Memory Clock PLL is not locked. Bit 9 - GAB Error. Bit 10 - BAP Intf Timeout. Bit 11 - BAP Intf Error. Bit 12 - BAP Decoder Error. Bit 13 - BAP Decoder Special Access Error. Bit 14 - BAP Controller Write Error. Bit 15 - BAP Controller Read Error. Bit 16 - BAP GAB Error. Bit 17 - IME0 is disabled. Bit 18 - IME1 is disabled. Bit 19 - Hash engine is disabled. Bit 20 - Multiplication Engine is disabled. Bit 21 - FDIB Empty Pkt. Wrong PTM access. Bit 22 - FDIB Past End of Pkt Error. Bit 23 - FDIB Fifo empty. Wrong PM access. Bit 24 - FDIB Invalid Page. Bit 25 - Fifo Full. Bit 26 - FDIB Mixed access. Bit 27 - FDOB PM Error. Bit 28 - FDOB is Full. Bit 29 - FDOB is empty. Bit 30 - PTM Bus Error. Bit 31 - PM Program Counter Error. Bit 32 - PM Stats BUS Error. Bit 33 - PM FDIB HPI BUS Error. Bit 34 - PM EME1 Parity Error. Bit 35 - PM EME0 Parity Error. Bit 36 - PM Multicast Error. Bit 37 - PM Frame Error. Bit 38 - PM Pop rollover. Bit 39 - PM Release Error. Bit 40 - AM Unsupported optype for region/device exception. Bit 41 - AM Illegal region/subregion exception. Bit 42 - AM Search run on exception. Bit 43 - AM Search bus error exception. Bit 44 - AM Parity error exception. Bit 45 - AM Protocol error exception. Bit 46 - AM Illegal Argument exception. Bit 47 - AM Non-alligned address exception. Bit 48 - AM Packet memory bus error exception. Bit 49 - AM Packet header address error exception. Bit 50 - AM Lookup Continue Zero exception. Bit 51 - AM Unsupported RSVD8 exception. Bit 52 - AM Unsupported RSVD10 exception. Bit 53 - AM Unsupported RSVD1 exception. Bit 54 - AM Unsupported RSVD2 exception. Bit 55 - AM Unsupported RSVD3 exception. Bit 56 - AM Unsupported RSVD4 exception. Bit 57 - AM Unsupported RSVD5 exception. Bit 58 - AM Unsupported Unknown h/w failure exception. Bit 59 - AM Software Interrupt. Bit 60 - Missing RSP Heartbeats. |
| KHI rcKhiForwardingRSPStateLeftLnHealthStatus | 1.3.6.1.4.1.2272.1.85.6.2.1.6 | KhiStatusValue | read-only | Indicates the Left Lane RSP-State Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of all the events is reported. |
| KHI rcKhiForwardingRSPStateMidLnHealthStatus | 1.3.6.1.4.1.2272.1.85.6.2.1.7 | KhiStatusValue | read-only | Indicates the Middle Lane RSP-State Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of all the events is reported. |
| KHI rcKhiForwardingRSPStateRightLnHealthStatus | 1.3.6.1.4.1.2272.1.85.6.2.1.8 | KhiStatusValue | read-only | Indicates the Right Lane RSP-State Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of all the events is reported. |
| rcKhiForwardingRSPStatsTable | 1.3.6.1.4.1.2272.1.85.6.3 | not-accessible | Forwarding Key Health Indicator MIB - RSP Stats. | |
| rcKhiForwardingRSPStatsEntry | 1.3.6.1.4.1.2272.1.85.6.3.1 | not-accessible | Forwarding KHI - RSP Stats table entry. | |
| INT rcKhiForwardingRSPStatsSlotNumber | 1.3.6.1.4.1.2272.1.85.6.3.1.1 | INTEGER | not-accessible | Slot Number. |
| INT rcKhiForwardingRSPStatsDirection | 1.3.6.1.4.1.2272.1.85.6.3.1.2 | INTEGER | not-accessible | Direction - Ingress or Egress. |
| C64 rcKhiForwardingRSPStatsLeftLnTotalAMPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.3 | Counter64 | read-only | Left Lane RSP Total AM Packets. |
| C64 rcKhiForwardingRSPStatsMidLnTotalAMPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.4 | Counter64 | read-only | Middle Lane RSP Total AM Packets. |
| C64 rcKhiForwardingRSPStatsRightLnTotalAMPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.5 | Counter64 | read-only | Right Lane RSP Total AM Packets. |
| C64 rcKhiForwardingRSPStatsLeftLnTotalAMRxErrPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.6 | Counter64 | read-only | Left Lane RSP Total AM Rx Error Packets Count. |
| C64 rcKhiForwardingRSPStatsMidLnTotalAMRxErrPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.7 | Counter64 | read-only | Middle Lane RSP Total AM Rx Error Packets Count. |
| C64 rcKhiForwardingRSPStatsRightLnTotalAMRxErrPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.8 | Counter64 | read-only | Right Lane RSP Total AM Rx Error Packets Count. |
| KHI rcKhiForwardingRSPStatsLeftLnAMRxErrPktsStatus | 1.3.6.1.4.1.2272.1.85.6.3.1.9 | KhiStatusValue | read-only | Left Lane RSP Total AM Rx Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingRSPStatsMidLnAMRxErrPktsStatus | 1.3.6.1.4.1.2272.1.85.6.3.1.10 | KhiStatusValue | read-only | Middle Lane RSP Total AM Rx Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingRSPStatsRightLnAMRxErrPktsStatus | 1.3.6.1.4.1.2272.1.85.6.3.1.11 | KhiStatusValue | read-only | Right Lane RSP Total AM Rx Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| C64 rcKhiForwardingRSPStatsLeftLnTotalAMShortPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.12 | Counter64 | read-only | Left Lane RSP Total AM Short Packets Count. |
| C64 rcKhiForwardingRSPStatsMidLnTotalAMShortPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.13 | Counter64 | read-only | Middle Lane RSP Total AM Short Packets Count. |
| C64 rcKhiForwardingRSPStatsRightLnTotalAMShortPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.14 | Counter64 | read-only | Right Lane RSP Total AM Short Packets Count. |
| KHI rcKhiForwardingRSPStatsLeftLnAMShortPktsStatus | 1.3.6.1.4.1.2272.1.85.6.3.1.15 | KhiStatusValue | read-only | Left Lane RSP Total AM Short Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingRSPStatsMidLnAMShortPktsStatus | 1.3.6.1.4.1.2272.1.85.6.3.1.16 | KhiStatusValue | read-only | Middle Lane RSP Total AM Short Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| KHI rcKhiForwardingRSPStatsRightLnAMShortPktsStatus | 1.3.6.1.4.1.2272.1.85.6.3.1.17 | KhiStatusValue | read-only | Right Lane RSP Total AM Short Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Red. |
| C64 rcKhiForwardingRSPStatsLeftLnTotalAMCongestionDrops | 1.3.6.1.4.1.2272.1.85.6.3.1.18 | Counter64 | read-only | Left Lane RSP Total AM Congestion Drop Count. |
| C64 rcKhiForwardingRSPStatsMidLnTotalAMCongestionDrops | 1.3.6.1.4.1.2272.1.85.6.3.1.19 | Counter64 | read-only | Middle Lane RSP Total AM Congestion Drop Count. |
| C64 rcKhiForwardingRSPStatsRightLnTotalAMCongestionDrops | 1.3.6.1.4.1.2272.1.85.6.3.1.20 | Counter64 | read-only | Right Lane RSP Total AM Congestion Drop Count. |
| KHI rcKhiForwardingRSPStatsLeftLnAMCongestionDropStatus | 1.3.6.1.4.1.2272.1.85.6.3.1.21 | KhiStatusValue | read-only | Left Lane RSP Total AM Congestion Drop Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| KHI rcKhiForwardingRSPStatsMidLnAMCongestionDropStatus | 1.3.6.1.4.1.2272.1.85.6.3.1.22 | KhiStatusValue | read-only | Middle Lane RSP Total AM Congestion Drop Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| KHI rcKhiForwardingRSPStatsRightLnAMCongestionDropStatus | 1.3.6.1.4.1.2272.1.85.6.3.1.23 | KhiStatusValue | read-only | Right Lane RSP Total AM Congestion Drop Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| C64 rcKhiForwardingRSPStatsLeftLnTotalAMProcErrPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.24 | Counter64 | read-only | Left Lane RSP Total AM Proc Error Packets Count. |
| C64 rcKhiForwardingRSPStatsMidLnTotalAMProcErrPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.25 | Counter64 | read-only | Middle Lane RSP Total AM Proc Error Packets Count. |
| C64 rcKhiForwardingRSPStatsRightLnTotalAMProcErrPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.26 | Counter64 | read-only | Right Lane RSP Total AM Proc Error Packets Count. |
| KHI rcKhiForwardingRSPStatsLeftLnAMProcErrPktsStatus | 1.3.6.1.4.1.2272.1.85.6.3.1.27 | KhiStatusValue | read-only | Left Lane RSP Total AM Proc Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| KHI rcKhiForwardingRSPStatsMidLnAMProcErrPktsStatus | 1.3.6.1.4.1.2272.1.85.6.3.1.28 | KhiStatusValue | read-only | Middle Lane RSP Total AM Proc Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| KHI rcKhiForwardingRSPStatsRightLnAMProcErrPktsStatus | 1.3.6.1.4.1.2272.1.85.6.3.1.29 | KhiStatusValue | read-only | Right Lane RSP Total AM Proc Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| C64 rcKhiForwardingRSPStatsLeftLnTotalAMExpPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.30 | Counter64 | read-only | Left Lane RSP Total AM Exp Packets Count. |
| C64 rcKhiForwardingRSPStatsMidLnTotalAMExpPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.31 | Counter64 | read-only | Middle Lane RSP Total AM Exp Packets Count. |
| C64 rcKhiForwardingRSPStatsRightLnTotalAMExpPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.32 | Counter64 | read-only | Right Lane RSP Total AM Exp Packets Count. |
| KHI rcKhiForwardingRSPStatsLeftLnAMExpPktsStatus | 1.3.6.1.4.1.2272.1.85.6.3.1.33 | KhiStatusValue | read-only | Left Lane RSP Total AM Exp Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| KHI rcKhiForwardingRSPStatsMidLnAMExpPktsStatus | 1.3.6.1.4.1.2272.1.85.6.3.1.34 | KhiStatusValue | read-only | Middle Lane RSP Total AM Exp Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| KHI rcKhiForwardingRSPStatsRightLnAMExpPktsStatus | 1.3.6.1.4.1.2272.1.85.6.3.1.35 | KhiStatusValue | read-only | Right Lane RSP Total AM Exp Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| C64 rcKhiForwardingRSPStatsLeftLnTotalPMFwdPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.36 | Counter64 | read-only | Left Lane RSP Total PM Forwarded Packets Count. |
| C64 rcKhiForwardingRSPStatsMidLnTotalPMFwdPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.37 | Counter64 | read-only | Middle Lane RSP Total PM Forwarded Packets Count. |
| C64 rcKhiForwardingRSPStatsRightLnTotalPMFwdPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.38 | Counter64 | read-only | Right Lane RSP Total PM Forwarded Packets Count. |
| C64 rcKhiForwardingRSPStatsLeftLnTotalPMDropErrPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.39 | Counter64 | read-only | Left Lane RSP Total PM Dropped Error Packets Count. |
| C64 rcKhiForwardingRSPStatsMidLnTotalPMDropErrPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.40 | Counter64 | read-only | Middle Lane RSP Total PM Dropped Error Packets Count. |
| C64 rcKhiForwardingRSPStatsRightLnTotalPMDropErrPkts | 1.3.6.1.4.1.2272.1.85.6.3.1.41 | Counter64 | read-only | Right Lane RSP Total PM Dropped Error Packets Count. |
| KHI rcKhiForwardingRSPStatsLeftLnPMDropErrStatus | 1.3.6.1.4.1.2272.1.85.6.3.1.42 | KhiStatusValue | read-only | Left Lane RSP Total PM Dropped Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| KHI rcKhiForwardingRSPStatsMidLnPMDropErrStatus | 1.3.6.1.4.1.2272.1.85.6.3.1.43 | KhiStatusValue | read-only | Middle Lane RSP Total PM Dropped Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| KHI rcKhiForwardingRSPStatsRightLnPMDropErrStatus | 1.3.6.1.4.1.2272.1.85.6.3.1.44 | KhiStatusValue | read-only | Right Lane RSP Total PM Dropped Error Packets Health Status. A zero count would indicate a Health Status of Green and a non-zero count would indicate a Yellow. |
| rcKhiForwardingF2XHealthTable | 1.3.6.1.4.1.2272.1.85.6.4 | not-accessible | Forwarding Key Health Indicator MIB - F2X (F2I and F2E) Health. | |
| rcKhiForwardingF2XHealthEntry | 1.3.6.1.4.1.2272.1.85.6.4.1 | not-accessible | Forwarding KHI - F2X Health table entry. | |
| INT rcKhiForwardingF2XHealthSlotNumber | 1.3.6.1.4.1.2272.1.85.6.4.1.1 | INTEGER | not-accessible | Slot Number. |
| BIT rcKhiForwardingF2XHealthLeftLnErrMask | 1.3.6.1.4.1.2272.1.85.6.4.1.2 | Bits | read-only | Left Lane F2X Health Bit Mask. Each bit in the mask represents a specific F2X event. The following are the events - Bit 0 - Police Drops. Indicates a Status of Yellow. Bit 1 - FOQ Drops. Indicates a Status of Yellow. Bit 2 - Fabric Drops. Indicates a Status of Yellow. Bit 3 - Legacy Drops. Indicates a Status of Yellow. Bit 4 - F2E Combined Packet Memory Threshold Exceeded. Indicates a Status of Yellow. Bit 5 - F2E HAB Master - FIFO Parity Error. Indicates a Status of Yellow. Bit 6 - F2E Egress SPI-4.2 Sync Error. Indicates a Status of Red. Bit 7 - F2E Loop SPI-4.2 Sync Error. Indicates a Status of Red. Bit 8 - F2E CIF Illegal Operation. Indicates a Status of Yellow. Bit 9 - F2E CIF Protocol Error. Indicates a Status of Yellow. Bit 10 - F2E CIF Errored Data. Indicates a Status of Yellow. Bit 11 - F2E CIF Illegal Address. Indicates a Status of Yellow. Bit 12 - F2E CIF Read Error in Target Data. Indicates a Status of Yellow. Bit 13 - F2E Egress Queue Drops. Indicates a Status of Red. Bit 14 - F2I Ingress SPI-4.2 Protocol Error. Indicates a Status of Yellow. Bit 15 - F2I Ingress SPI-4.2 Overflow Error. Indicates a Status of Red. Bit 16 - F2I Ingress SPI-4.2 Abort Received. Indicates a Status of Yellow. Bit 17 - F2I Ingress SPI-4.2 Data DIP4 Error Detected. Indicates a Status of Yellow. Bit 18 - F2I Ingress SPI-4.2 Sync Error. Indicates a Status of Red. Bit 19 - F2I Loop SPI-4.2 Protocol Error. Indicates a Status of Yellow. Bit 20 - F2I Loop SPI-4.2 Overflow Error. Indicates a Status of Yellow. Bit 21 - F2I Loop SPI-4.2 Abort Received. Indicates a Status of Yellow. Bit 22 - F2I Loop SPI-4.2 Data DIP4 Error Detected. Indicates a Status of Yellow. Bit 23 - F2I Loop SPI-4.2 Sync Error. Indicates a Status of Red. Bit 24 - F2I HAB Slave FIFO Parity Error. Indicates a Status of Yellow. Bit 25 - F2I HAB Slave FIFO Overflow. Indicates a Status of Red. Bit 26 - F2I HAB Slave Data Parity Error. Indicates a Status of Yellow. Bit 27 - F2I HAB Slave Protocol Error. Indicates a Status of Yellow. Bit 28 - F2I HAB Slave Data Error. Indicates a Status of Yellow. Bit 29 - F2I FOQM Protocol Error. Indicates a Status of Red. Bit 30 - F2I FOQM Overflow. Indicates a Status of Red. Bit 31 - F2E Packet Parity Error. Indicates a status of Red. Bit 32 - F2E Parity Error in Packet Memory Data (QDR). Indicates a status of Red. Bit 33 - F2E Parity Error in Packet Memory Control (QDR). Indicates a status of Red. Bit 34 - F2E Packet Memory Parity Error (QDR). Indicates a status of Red. |
| BIT rcKhiForwardingF2XHealthMidLnErrMask | 1.3.6.1.4.1.2272.1.85.6.4.1.3 | Bits | read-only | Middle Lane F2X Health Bit Mask. Each bit in the mask represents a specific F2X event. The following are the events - Bit 0 - Police Drops. Indicates a Status of Yellow. Bit 1 - FOQ Drops. Indicates a Status of Yellow. Bit 2 - Fabric Drops. Indicates a Status of Yellow. Bit 3 - Legacy Drops. Indicates a Status of Yellow. Bit 4 - F2E Combined Packet Memory Threshold Exceeded. Indicates a Status of Yellow. Bit 5 - F2E HAB Master - FIFO Parity Error. Indicates a Status of Yellow. Bit 6 - F2E Egress SPI-4.2 Sync Error. Indicates a Status of Red. Bit 7 - F2E Loop SPI-4.2 Sync Error. Indicates a Status of Red. Bit 8 - F2E CIF Illegal Operation. Indicates a Status of Yellow. Bit 9 - F2E CIF Protocol Error. Indicates a Status of Yellow. Bit 10 - F2E CIF Errored Data. Indicates a Status of Yellow. Bit 11 - F2E CIF Illegal Address. Indicates a Status of Yellow. Bit 12 - F2E CIF Read Error in Target Data. Indicates a Status of Yellow. Bit 13 - F2E Egress Queue Drops. Indicates a Status of Red. Bit 14 - F2I Ingress SPI-4.2 Protocol Error. Indicates a Status of Yellow. Bit 15 - F2I Ingress SPI-4.2 Overflow Error. Indicates a Status of Red. Bit 16 - F2I Ingress SPI-4.2 Abort Received. Indicates a Status of Yellow. Bit 17 - F2I Ingress SPI-4.2 Data DIP4 Error Detected. Indicates a Status of Yellow. Bit 18 - F2I Ingress SPI-4.2 Sync Error. Indicates a Status of Red. Bit 19 - F2I Loop SPI-4.2 Protocol Error. Indicates a Status of Yellow. Bit 20 - F2I Loop SPI-4.2 Overflow Error. Indicates a Status of Yellow. Bit 21 - F2I Loop SPI-4.2 Abort Received. Indicates a Status of Yellow. Bit 22 - F2I Loop SPI-4.2 Data DIP4 Error Detected. Indicates a Status of Yellow. Bit 23 - F2I Loop SPI-4.2 Sync Error. Indicates a Status of Red. Bit 24 - F2I HAB Slave FIFO Parity Error. Indicates a Status of Yellow. Bit 25 - F2I HAB Slave FIFO Overflow. Indicates a Status of Red. Bit 26 - F2I HAB Slave Data Parity Error. Indicates a Status of Yellow. Bit 27 - F2I HAB Slave Protocol Error. Indicates a Status of Yellow. Bit 28 - F2I HAB Slave Data Error. Indicates a Status of Yellow. Bit 29 - F2I FOQM Protocol Error. Indicates a Status of Red. Bit 30 - F2I FOQM Overflow. Indicates a Status of Red. Bit 31 - F2E Packet Parity Error. Indicates a status of Red. Bit 32 - F2E Parity Error in Packet Memory Data (QDR). Indicates a status of Red. Bit 33 - F2E Parity Error in Packet Memory Control (QDR). Indicates a status of Red. Bit 34 - F2E Packet Memory Parity Error (QDR). Indicates a status of Red. |
| BIT rcKhiForwardingF2XHealthRightLnErrMask | 1.3.6.1.4.1.2272.1.85.6.4.1.4 | Bits | read-only | Right Lane F2X Health Bit Mask. Each bit in the mask represents a specific F2X event. The following are the events - Bit 0 - Police Drops. Indicates a Status of Yellow. Bit 1 - FOQ Drops. Indicates a Status of Yellow. Bit 2 - Fabric Drops. Indicates a Status of Yellow. Bit 3 - Legacy Drops. Indicates a Status of Yellow. Bit 4 - F2E Combined Packet Memory Threshold Exceeded. Indicates a Status of Yellow. Bit 5 - F2E HAB Master - FIFO Parity Error. Indicates a Status of Yellow. Bit 6 - F2E Egress SPI-4.2 Sync Error. Indicates a Status of Red. Bit 7 - F2E Loop SPI-4.2 Sync Error. Indicates a Status of Red. Bit 8 - F2E CIF Illegal Operation. Indicates a Status of Yellow. Bit 9 - F2E CIF Protocol Error. Indicates a Status of Yellow. Bit 10 - F2E CIF Errored Data. Indicates a Status of Yellow. Bit 11 - F2E CIF Illegal Address. Indicates a Status of Yellow. Bit 12 - F2E CIF Read Error in Target Data. Indicates a Status of Yellow. Bit 13 - F2E Egress Queue Drops. Indicates a Status of Red. Bit 14 - F2I Ingress SPI-4.2 Protocol Error. Indicates a Status of Yellow. Bit 15 - F2I Ingress SPI-4.2 Overflow Error. Indicates a Status of Red. Bit 16 - F2I Ingress SPI-4.2 Abort Received. Indicates a Status of Yellow. Bit 17 - F2I Ingress SPI-4.2 Data DIP4 Error Detected. Indicates a Status of Yellow. Bit 18 - F2I Ingress SPI-4.2 Sync Error. Indicates a Status of Red. Bit 19 - F2I Loop SPI-4.2 Protocol Error. Indicates a Status of Yellow. Bit 20 - F2I Loop SPI-4.2 Overflow Error. Indicates a Status of Yellow. Bit 21 - F2I Loop SPI-4.2 Abort Received. Indicates a Status of Yellow. Bit 22 - F2I Loop SPI-4.2 Data DIP4 Error Detected. Indicates a Status of Yellow. Bit 23 - F2I Loop SPI-4.2 Sync Error. Indicates a Status of Red. Bit 24 - F2I HAB Slave FIFO Parity Error. Indicates a Status of Yellow. Bit 25 - F2I HAB Slave FIFO Overflow. Indicates a Status of Red. Bit 26 - F2I HAB Slave Data Parity Error. Indicates a Status of Yellow. Bit 27 - F2I HAB Slave Protocol Error. Indicates a Status of Yellow. Bit 28 - F2I HAB Slave Data Error. Indicates a Status of Yellow. Bit 29 - F2I FOQM Protocol Error. Indicates a Status of Red. Bit 30 - F2I FOQM Overflow. Indicates a Status of Red. Bit 31 - F2E Packet Parity Error. Indicates a status of Red. Bit 32 - F2E Parity Error in Packet Memory Data (QDR). Indicates a status of Red. Bit 33 - F2E Parity Error in Packet Memory Control (QDR). Indicates a status of Red. Bit 34 - F2E Packet Memory Parity Error (QDR). Indicates a status of Red. |
| KHI rcKhiForwardingF2XHealthLeftLnHealthStatus | 1.3.6.1.4.1.2272.1.85.6.4.1.5 | KhiStatusValue | read-only | Indicates the Left Lane F2X Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of all the events is reported. |
| KHI rcKhiForwardingF2XHealthMidLnHealthStatus | 1.3.6.1.4.1.2272.1.85.6.4.1.6 | KhiStatusValue | read-only | Indicates the Middle Lane F2X Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of all the events is reported. |
| KHI rcKhiForwardingF2XHealthRightLnHealthStatus | 1.3.6.1.4.1.2272.1.85.6.4.1.7 | KhiStatusValue | read-only | Indicates the Right Lane F2X Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of all the events is reported. |
| rcKhiForwardingHistoryTable | 1.3.6.1.4.1.2272.1.85.6.5 | not-accessible | Forwarding Key Health Indicator MIB - Historical Data. | |
| rcKhiForwardingHistoryEntry | 1.3.6.1.4.1.2272.1.85.6.5.1 | not-accessible | Forwarding KHI - History table entry. | |
| INT rcKhiForwardingHistoryIndex | 1.3.6.1.4.1.2272.1.85.6.5.1.1 | INTEGER | not-accessible | Index for Forwarding Health historical data. |
| DAT rcKhiForwardingHistoryTimeStamp | 1.3.6.1.4.1.2272.1.85.6.5.1.2 | DateAndTime | read-only | Timestamp indicating when a particular event occurred. |
| INT rcKhiForwardingHistorySlotNumber | 1.3.6.1.4.1.2272.1.85.6.5.1.3 | INTEGER | read-only | Slot Number. |
| INT rcKhiForwardingHistoryLane | 1.3.6.1.4.1.2272.1.85.6.5.1.4 | INTEGER | read-only | Lane where the event occurred. |
| STR rcKhiForwardingHistoryEvent | 1.3.6.1.4.1.2272.1.85.6.5.1.5 | DisplayString | read-only | Name of the event |
| rcKhiForwardingCurrentStatusTable | 1.3.6.1.4.1.2272.1.85.6.6 | not-accessible | Forwarding Key Health Indicator MIB - Current Status Info. | |
| rcKhiForwardingCurrentStatusEntry | 1.3.6.1.4.1.2272.1.85.6.6.1 | not-accessible | Forwarding KHI - Current Status table entry. | |
| INT rcKhiForwardingCurrentStatusSlotNumber | 1.3.6.1.4.1.2272.1.85.6.6.1.1 | INTEGER | not-accessible | Slot Number. |
| KHI rcKhiForwardingCurrentStatusLeftLnHealth | 1.3.6.1.4.1.2272.1.85.6.6.1.2 | KhiStatusValue | read-only | Indicates the Left Lane Current Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of all the events is reported.Slot Number. |
| BIT rcKhiForwardingCurrentStatusLeftLnErrMask | 1.3.6.1.4.1.2272.1.85.6.6.1.3 | Bits | read-only | Left Lane Current Status Health Bit Mask. Each bit in the mask represents what kind of errors the lane is currently experiencing. The following are the events - Bit 0 - Asic Resets. Bit 1 - RSP State Errors. Bit 2 - RSP Stats Errors. Bit 3 - F2X Errors. |
| KHI rcKhiForwardingCurrentStatusMidLnHealth | 1.3.6.1.4.1.2272.1.85.6.6.1.4 | KhiStatusValue | read-only | Indicates the Middle Lane Current Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of all the events is reported.Slot Number. |
| BIT rcKhiForwardingCurrentStatusMidLnErrMask | 1.3.6.1.4.1.2272.1.85.6.6.1.5 | Bits | read-only | Middle Lane Current Status Health Bit Mask. Each bit in the mask represents what kind of errors the lane is currently experiencing. The following are the events - Bit 0 - Asic Resets. Bit 1 - RSP State Errors. Bit 2 - RSP Stats Errors. Bit 3 - F2X Errors. |
| KHI rcKhiForwardingCurrentStatusRightLnHealth | 1.3.6.1.4.1.2272.1.85.6.6.1.6 | KhiStatusValue | read-only | Indicates the Right Lane Current Health as Green/Yellow/Red. If multiple events with different health status occurs at the same time, the highest health status of all the events is reported.Slot Number. |
| BIT rcKhiForwardingCurrentStatusRightLnErrMask | 1.3.6.1.4.1.2272.1.85.6.6.1.7 | Bits | read-only | Right Lane Current Status Health Bit Mask. Each bit in the mask represents what kind of errors the lane is currently experiencing. The following are the events - Bit 0 - Asic Resets. Bit 1 - RSP State Errors. Bit 2 - RSP Stats Errors. Bit 3 - F2X Errors. |
| rcKhiProtocol | 1.3.6.1.4.1.2272.1.85.7 | |||
| rcKhiOspfTable | 1.3.6.1.4.1.2272.1.85.7.1 | not-accessible | Ospf protcol KHI summary | |
| rcKhiOspfEntry | 1.3.6.1.4.1.2272.1.85.7.1.1 | not-accessible | Ospf protcol KHI summary entry | |
| I32 rcKhiOspfVrfId | 1.3.6.1.4.1.2272.1.85.7.1.1.1 | Integer32 | not-accessible | An unique index used to identify a particular fan in the system. |
| C32 rcKhiOspfRouteTableSize | 1.3.6.1.4.1.2272.1.85.7.1.1.2 | Counter32 | read-only | |
| C32 rcKhiOspfRefRouteTableSize | 1.3.6.1.4.1.2272.1.85.7.1.1.3 | Counter32 | read-only | |
| C32 rcKhiOspfLsdbTableSize | 1.3.6.1.4.1.2272.1.85.7.1.1.4 | Counter32 | read-only | |
| C32 rcKhiOspfNumOfInterfaces | 1.3.6.1.4.1.2272.1.85.7.1.1.5 | Counter32 | read-only | |
| C32 rcKhiOspfNumOfAdjacency | 1.3.6.1.4.1.2272.1.85.7.1.1.6 | Counter32 | read-only | |
| C32 rcKhiOspfRefNumOfAdjacency | 1.3.6.1.4.1.2272.1.85.7.1.1.7 | Counter32 | read-only | |
| DAT rcKhiOspfLastClearTimestamp | 1.3.6.1.4.1.2272.1.85.7.1.1.8 | DateAndTime | read-only | |
| DAT rcKhiOspfFirstEventTimestamp | 1.3.6.1.4.1.2272.1.85.7.1.1.9 | DateAndTime | read-only | |
| rcKhiOspfHistoryTable | 1.3.6.1.4.1.2272.1.85.7.2 | not-accessible | Ospf protcol KHI summary | |
| rcKhiOspfHistoryEntry | 1.3.6.1.4.1.2272.1.85.7.2.1 | not-accessible | Ospf protcol KHI summary entry | |
| I32 rcKhiOspfHistoryVrfId | 1.3.6.1.4.1.2272.1.85.7.2.1.1 | Integer32 | not-accessible | An unique index used to identify a particular fan in the system. |
| I32 rcKhiOspfHistoryIndex | 1.3.6.1.4.1.2272.1.85.7.2.1.2 | Integer32 | not-accessible | History index for a particular VRF OSPF |
| C32 rcKhiOspfHistoryLsdbTableSize | 1.3.6.1.4.1.2272.1.85.7.2.1.3 | Counter32 | read-only | |
| C32 rcKhiOspfHistoryNumOfAdjacency | 1.3.6.1.4.1.2272.1.85.7.2.1.4 | Counter32 | read-only | |
| DAT rcKhiOspfHistoryTimestamp | 1.3.6.1.4.1.2272.1.85.7.2.1.5 | DateAndTime | read-only | |
| rcKhiBgpTable | 1.3.6.1.4.1.2272.1.85.7.3 | not-accessible | Bgp protcol KHI summary | |
| rcKhiBgpEntry | 1.3.6.1.4.1.2272.1.85.7.3.1 | not-accessible | Bgp protcol KHI summary entry | |
| I32 rcKhiBgpVrfId | 1.3.6.1.4.1.2272.1.85.7.3.1.1 | Integer32 | not-accessible | An unique index used to identify a particular fan in the system. |
| C32 rcKhiBgpUpdateSent | 1.3.6.1.4.1.2272.1.85.7.3.1.2 | Counter32 | read-only | |
| C32 rcKhiBgpUpdateRecvd | 1.3.6.1.4.1.2272.1.85.7.3.1.3 | Counter32 | read-only | Update received |
| C32 rcKhiBgpNotifySent | 1.3.6.1.4.1.2272.1.85.7.3.1.4 | Counter32 | read-only | Notify sent |
| C32 rcKhiBgpNotifyRecvd | 1.3.6.1.4.1.2272.1.85.7.3.1.5 | Counter32 | read-only | BGP Notify received |
| C32 rcKhiBgpBadEvents | 1.3.6.1.4.1.2272.1.85.7.3.1.6 | Counter32 | read-only | BGP bad event count |
| C32 rcKhiBgpRouteTableSize | 1.3.6.1.4.1.2272.1.85.7.3.1.7 | Counter32 | read-only | BGP route table size |
| C32 rcKhiBgpRefRouteTableSize | 1.3.6.1.4.1.2272.1.85.7.3.1.8 | Counter32 | read-only | BGP reference route table size |
| C32 rcKhiBgpEstablishedNbrs | 1.3.6.1.4.1.2272.1.85.7.3.1.9 | Counter32 | read-only | BGP established neighbor |
| C32 rcKhiBgpRefEstablishedNbrs | 1.3.6.1.4.1.2272.1.85.7.3.1.10 | Counter32 | read-only | BGP established neighbor |
| C32 rcKhiBgpNumOfAggregates | 1.3.6.1.4.1.2272.1.85.7.3.1.11 | Counter32 | read-only | Number of aggregates |
| C32 rcKhiBgpNumOfImportedRoutes | 1.3.6.1.4.1.2272.1.85.7.3.1.12 | Counter32 | read-only | Number of imported routes |
| DAT rcKhiBgpLastClearTimestamp | 1.3.6.1.4.1.2272.1.85.7.3.1.13 | DateAndTime | read-only | |
| DAT rcKhiBgpFirstEventTimestamp | 1.3.6.1.4.1.2272.1.85.7.3.1.14 | DateAndTime | read-only | |
| rcKhiBgpHistoryTable | 1.3.6.1.4.1.2272.1.85.7.4 | not-accessible | Bgp protcol KHI summary | |
| rcKhiBgpHistoryEntry | 1.3.6.1.4.1.2272.1.85.7.4.1 | not-accessible | Bgp protcol KHI summary entry | |
| I32 rcKhiBgpHistoryVrfId | 1.3.6.1.4.1.2272.1.85.7.4.1.1 | Integer32 | not-accessible | An unique index used to identify a particular fan in the system. |
| I32 rcKhiBgpHistoryIndex | 1.3.6.1.4.1.2272.1.85.7.4.1.2 | Integer32 | not-accessible | History index for a particular VRF OSPF |
| C32 rcKhiBgpHistoryRibCount | 1.3.6.1.4.1.2272.1.85.7.4.1.3 | Counter32 | read-only | Number of BGP Rib |
| C32 rcKhiBgpHistoryNumOfPeers | 1.3.6.1.4.1.2272.1.85.7.4.1.4 | Counter32 | read-only | Number of BGP peers |
| DAT rcKhiBgpHistoryTimestamp | 1.3.6.1.4.1.2272.1.85.7.4.1.5 | DateAndTime | read-only | BGP history timestamp |
| rcKhiPimTable | 1.3.6.1.4.1.2272.1.85.7.5 | not-accessible | Pim protcol KHI summary | |
| rcKhiPimEntry | 1.3.6.1.4.1.2272.1.85.7.5.1 | not-accessible | Pim protcol KHI summary entry | |
| I32 rcKhiPimVrfId | 1.3.6.1.4.1.2272.1.85.7.5.1.1 | Integer32 | not-accessible | An unique index used to identify a particular fan in the system. |
| C32 rcKhiPimRoutes | 1.3.6.1.4.1.2272.1.85.7.5.1.2 | Counter32 | read-only | |
| C32 rcKhiPimRefRoutes | 1.3.6.1.4.1.2272.1.85.7.5.1.3 | Counter32 | read-only | |
| C32 rcKhiPimAdjacencies | 1.3.6.1.4.1.2272.1.85.7.5.1.4 | Counter32 | read-only | |
| C32 rcKhiPimRefAdjacencies | 1.3.6.1.4.1.2272.1.85.7.5.1.5 | Counter32 | read-only | |
| DAT rcKhiPimLastClearTimestamp | 1.3.6.1.4.1.2272.1.85.7.5.1.6 | DateAndTime | read-only | |
| DAT rcKhiPimFirstEventTimestamp | 1.3.6.1.4.1.2272.1.85.7.5.1.7 | DateAndTime | read-only | |
| rcKhiPimHistoryTable | 1.3.6.1.4.1.2272.1.85.7.6 | not-accessible | Pim protcol KHI summary | |
| rcKhiPimHistoryEntry | 1.3.6.1.4.1.2272.1.85.7.6.1 | not-accessible | Pim protcol KHI summary entry | |
| I32 rcKhiPimHistoryVrfId | 1.3.6.1.4.1.2272.1.85.7.6.1.1 | Integer32 | not-accessible | An unique index used to identify a particular fan in the system. |
| I32 rcKhiPimHistoryIndex | 1.3.6.1.4.1.2272.1.85.7.6.1.2 | Integer32 | not-accessible | History index for a particular VRF PIM |
| C32 rcKhiPimHistoryRouteCount | 1.3.6.1.4.1.2272.1.85.7.6.1.3 | Counter32 | read-only | |
| C32 rcKhiPimHistoryAdjacencies | 1.3.6.1.4.1.2272.1.85.7.6.1.4 | Counter32 | read-only | |
| DAT rcKhiPimHistoryTimestamp | 1.3.6.1.4.1.2272.1.85.7.6.1.5 | DateAndTime | read-only | |
| rcKhiIgmpHistoryTable | 1.3.6.1.4.1.2272.1.85.7.7 | not-accessible | Igmp protcol KHI summary | |
| rcKhiIgmpHistoryEntry | 1.3.6.1.4.1.2272.1.85.7.7.1 | not-accessible | Igmp protcol KHI summary entry | |
| I32 rcKhiIgmpHistoryVrfId | 1.3.6.1.4.1.2272.1.85.7.7.1.1 | Integer32 | not-accessible | An unique index used to identify a particular fan in the system. |
| I32 rcKhiIgmpHistoryIndex | 1.3.6.1.4.1.2272.1.85.7.7.1.2 | Integer32 | not-accessible | History index for a particular VRF PIM |
| C32 rcKhiIgmpHistoryGroupCount | 1.3.6.1.4.1.2272.1.85.7.7.1.3 | Counter32 | read-only | |
| C32 rcKhiIgmpHistorySenderCount | 1.3.6.1.4.1.2272.1.85.7.7.1.4 | Counter32 | read-only | |
| DAT rcKhiIgmpHistoryTimestamp | 1.3.6.1.4.1.2272.1.85.7.7.1.5 | DateAndTime | read-only | |
| rcKhiIgmpSnoopHistoryTable | 1.3.6.1.4.1.2272.1.85.7.8 | not-accessible | IgmpSnoop protcol KHI summary | |
| rcKhiIgmpSnoopHistoryEntry | 1.3.6.1.4.1.2272.1.85.7.8.1 | not-accessible | IgmpSnoop protcol KHI summary entry | |
| I32 rcKhiIgmpSnoopHistoryVrfId | 1.3.6.1.4.1.2272.1.85.7.8.1.1 | Integer32 | not-accessible | An unique index used to identify a particular fan in the system. |
| I32 rcKhiIgmpSnoopHistoryIndex | 1.3.6.1.4.1.2272.1.85.7.8.1.2 | Integer32 | not-accessible | History index for a particular VRF PIM |
| C32 rcKhiIgmpSnoopHistoryStreamCount | 1.3.6.1.4.1.2272.1.85.7.8.1.3 | Counter32 | read-only | IGMP Snoop stream count |
| C32 rcKhiIgmpSnoopHistoryHostCount | 1.3.6.1.4.1.2272.1.85.7.8.1.4 | Counter32 | read-only | IgmpSnoop hots count |
| DAT rcKhiIgmpSnoopHistoryTimestamp | 1.3.6.1.4.1.2272.1.85.7.8.1.5 | DateAndTime | read-only | Igmp Snoop timestamp |
| C32 rcKhiVlacpTotalPortCount | 1.3.6.1.4.1.2272.1.85.7.9 | Counter32 | read-only | VLACP port count, where VLACP is enabled |
| C32 rcKhiVlacpPortUpCount | 1.3.6.1.4.1.2272.1.85.7.10 | Counter32 | read-only | Number of ports where VLACP is up |
| KHI rcKhiIstState | 1.3.6.1.4.1.2272.1.85.7.11 | KhiStatusValue | read-only | Current IST State for KHI |
| DAT rcKhiFirstIstSyncTimeStamp | 1.3.6.1.4.1.2272.1.85.7.12 | DateAndTime | read-only | Timestamp for the first IST Sync |
| DAT rcKhiLastIstSyncTimeStamp | 1.3.6.1.4.1.2272.1.85.7.13 | DateAndTime | read-only | Timestamp for the last IST Sync |
| C32 rcKhiNumIstUpEvents | 1.3.6.1.4.1.2272.1.85.7.14 | Counter32 | read-only | Total number of IST up events |
| C32 rcKhiNumIstDownEvents | 1.3.6.1.4.1.2272.1.85.7.15 | Counter32 | read-only | Total number of IST down events |
| C32 rcKhiNumSmltDownEventsSent | 1.3.6.1.4.1.2272.1.85.7.16 | Counter32 | read-only | Total number of SMLT down events sent |
| DAT rcKhiLastSmltDownEventSentTimeStamp | 1.3.6.1.4.1.2272.1.85.7.17 | DateAndTime | read-only | Timestamp for the last SMLT down event sent |
| C32 rcKhiNumSmltDownEventsRecv | 1.3.6.1.4.1.2272.1.85.7.18 | Counter32 | read-only | Total number of SMLT down events received |
| DAT rcKhiLastSmltDownEventRecvTimeStamp | 1.3.6.1.4.1.2272.1.85.7.19 | DateAndTime | read-only | Timestamp for the last SMLT down event received |
| C32 rcKhiNumSmltUpEventsSent | 1.3.6.1.4.1.2272.1.85.7.20 | Counter32 | read-only | Total number of SMLT up events sent |
| DAT rcKhiLastSmltUpEventSentTimeStamp | 1.3.6.1.4.1.2272.1.85.7.21 | DateAndTime | read-only | Timestamp for the last SMLT up event sent |
| C32 rcKhiNumSmltUpEventsRecv | 1.3.6.1.4.1.2272.1.85.7.22 | Counter32 | read-only | Total number of SMLT Up events received |
| DAT rcKhiLastSmltUpEventRecvTimeStamp | 1.3.6.1.4.1.2272.1.85.7.23 | DateAndTime | read-only | Timestamp for the last SMLT up event received |
| C32 rcKhiNumSendMacAddrSent | 1.3.6.1.4.1.2272.1.85.7.24 | Counter32 | read-only | Total number of SMLT send mac addr events sent |
| DAT rcKhiLastSendMacAddrSentTimeStamp | 1.3.6.1.4.1.2272.1.85.7.25 | DateAndTime | read-only | Timestamp for the last SMLT send MAC addr event sent |
| C32 rcKhiNumSendMacAddrRecv | 1.3.6.1.4.1.2272.1.85.7.26 | Counter32 | read-only | Total number of SMLT send mac addr events recv |
| DAT rcKhiLastSendMacAddrRecvTimeStamp | 1.3.6.1.4.1.2272.1.85.7.27 | DateAndTime | read-only | Timestamp for the last SMLT send MAC addr event received |
| rcKhiIstHistoryTable | 1.3.6.1.4.1.2272.1.85.7.28 | not-accessible | Ist protcol KHI history | |
| rcKhiIstHistoryEntry | 1.3.6.1.4.1.2272.1.85.7.28.1 | not-accessible | Ist protcol KHI history entry | |
| I32 rcKhiIstHistoryIndex | 1.3.6.1.4.1.2272.1.85.7.28.1.1 | Integer32 | not-accessible | History index for a particular IST history entry |
| KHI rcKhiIstHistoryIstStatus | 1.3.6.1.4.1.2272.1.85.7.28.1.2 | KhiStatusValue | read-only | Status of the IST |
| DAT rcKhiIstHistoryTimestamp | 1.3.6.1.4.1.2272.1.85.7.28.1.3 | DateAndTime | read-only | Timestamp associated with IST history entry |
| rcKhiSmltHistoryTable | 1.3.6.1.4.1.2272.1.85.7.29 | not-accessible | Smlt protocol KHI history | |
| rcKhiSmltHistoryEntry | 1.3.6.1.4.1.2272.1.85.7.29.1 | not-accessible | Smlt protcol KHI history entry | |
| I32 rcKhiSmltHistoryIndex | 1.3.6.1.4.1.2272.1.85.7.29.1.1 | Integer32 | not-accessible | History index for a particular SMLT history entry |
| I32 rcKhiSmltHistorySmltId | 1.3.6.1.4.1.2272.1.85.7.29.1.2 | Integer32 | read-only | SMLTID of the SMLT history entry |
| KHI rcKhiSmltHistorySmltStatus | 1.3.6.1.4.1.2272.1.85.7.29.1.3 | KhiStatusValue | read-only | Status of the SMLT |
| DAT rcKhiSmltHistoryTimestamp | 1.3.6.1.4.1.2272.1.85.7.29.1.4 | DateAndTime | read-only | Timestamp associated with IST history entry |
| rcKhiSmltTable | 1.3.6.1.4.1.2272.1.85.7.30 | not-accessible | Smlt protocol KHI | |
| rcKhiSmltEntry | 1.3.6.1.4.1.2272.1.85.7.30.1 | not-accessible | Smlt protcol KHI entry | |
| I32 rcKhiSmltId | 1.3.6.1.4.1.2272.1.85.7.30.1.1 | Integer32 | not-accessible | SMLTID of the SMLT entry, also used as index |
| KHI rcKhiSmltStatus | 1.3.6.1.4.1.2272.1.85.7.30.1.2 | KhiStatusValue | read-only | Status of the SMLT |
| C32 rcKhiSmltUpEvents | 1.3.6.1.4.1.2272.1.85.7.30.1.3 | Counter32 | read-only | Number of SMLT Up Events |
| C32 rcKhiSmltDownEvents | 1.3.6.1.4.1.2272.1.85.7.30.1.4 | Counter32 | read-only | Number of SMLT Down Events |
| rcKhiMgmt | 1.3.6.1.4.1.2272.1.85.8 | |||
| KHI rcKhiMgmtCurrentLogStatus | 1.3.6.1.4.1.2272.1.85.8.1 | KhiStatusValue | read-only | The current status of logging task |
| KHI rcKhiMgmtLogFirstHighestEvent | 1.3.6.1.4.1.2272.1.85.8.2 | KhiStatusValue | read-only | The first change status of the log since last boot or clear. 'green (1)' means log OK. 'red (4)' means log fail |
| DAT rcKhiMgmtLogFirstHighestEventTime | 1.3.6.1.4.1.2272.1.85.8.3 | DateAndTime | read-only | Record the first log task change time The display format in mmddyyhhmmss. If all are zero, it means no change |
| KHI rcKhiMgmtLogRefStatus | 1.3.6.1.4.1.2272.1.85.8.4 | KhiStatusValue | read-only | Reference status before change since last boot or clear. 'green (1)' means log OK. 'red (4)' means log fail |
| DAT rcKhiMgmtLogStatusLastClearTime | 1.3.6.1.4.1.2272.1.85.8.5 | DateAndTime | read-only | Record the first log task change time The display format in mmddyyhhmmss. If all are zero, it means no change |
| rcKhiMgmtLogHistoryTable | 1.3.6.1.4.1.2272.1.85.8.6 | not-accessible | Log history KHI summary | |
| rcKhiMgmtLogHistoryEntry | 1.3.6.1.4.1.2272.1.85.8.6.1 | not-accessible | Log sttaus KHI summary entry | |
| I32 rcKhiMgmtLogHistoryIndex | 1.3.6.1.4.1.2272.1.85.8.6.1.1 | Integer32 | not-accessible | An unique history index used to identify a particular entry in log history. |
| KHI rcKhiMgmtLogHistoryStatus | 1.3.6.1.4.1.2272.1.85.8.6.1.2 | KhiStatusValue | read-only | Changing Status |
| DAT rcKhiMgmtLogHistoryTimestamp | 1.3.6.1.4.1.2272.1.85.8.6.1.3 | DateAndTime | read-only | Status change timestamp. |
| rcKhiIpInterface | 1.3.6.1.4.1.2272.1.85.9 | |||
| rcKhiIpInterfaceHistoryTable | 1.3.6.1.4.1.2272.1.85.9.1 | not-accessible | Ip Interface Historical Data | |
| rcKhiIpInterfaceHistoryEntry | 1.3.6.1.4.1.2272.1.85.9.1.1 | not-accessible | Ip Interface history table entry. | |
| INT rcKhiIpInterfaceHistoryIndex | 1.3.6.1.4.1.2272.1.85.9.1.1.1 | INTEGER | not-accessible | Historical data index number. |
| DAT rcKhiIpInterfaceHistoryTimestamp | 1.3.6.1.4.1.2272.1.85.9.1.1.2 | DateAndTime | read-only | Timestamp indicating when the event occurred. |
| IP rcKhiIpInterfaceHistoryIpAddr | 1.3.6.1.4.1.2272.1.85.9.1.1.3 | IpAddress | read-only | IP address of the interface. |
| INT rcKhiIpInterfaceHistoryVlanId | 1.3.6.1.4.1.2272.1.85.9.1.1.4 | INTEGER | read-only | Vlan id of the IP interface. |
| INT rcKhiIpInterfaceHistoryEvent | 1.3.6.1.4.1.2272.1.85.9.1.1.5 | INTEGER | read-only | Indicates whether the interface went up or down. |
| rc2k | 1.3.6.1.4.1.2272.1.100 | |||
| rc2kChassis | 1.3.6.1.4.1.2272.1.100.1 | |||
| OCT rc2kChassisPortOperStatus | 1.3.6.1.4.1.2272.1.100.1.1 | OCTET STRING | read-only | A bit array that contains the oper-status of the ports in the device. 2 bits are used for each port. The high order 2 bits of the first octet represent port #0, the next two bits are used for port #1, etc. The status is encoded with the following scheme : value meaning ----- ------- 0 no-link (admin=up, oper=down) 1 up (admin=up, oper=up) 2 down (admin=down, oper=down) 3 testing (admin=test, oper=test) |
| G32 rc2kChassisTemperature | 1.3.6.1.4.1.2272.1.100.1.2 | Gauge32 | read-only | Used to indicate the core operating temperature of the chassis. This value represents the degree in celsius of the air inside the chassis. |
| G32 rc2kChassisAmbientLowerTemperature | 1.3.6.1.4.1.2272.1.100.1.3 | Gauge32 | read-only | Used to indicate the temperature of the air entering the fan at the lower half of the chassis. |
| G32 rc2kChassisAmbientUpperTemperature | 1.3.6.1.4.1.2272.1.100.1.4 | Gauge32 | read-only | Used to indicate the temperature of the air entering the fan at the upper half of the chassis. |
| MAC rc2kChassisBaseMacAddr | 1.3.6.1.4.1.2272.1.100.1.5 | MacAddress | read-only | base mac addr |
| I32 rc2kChassisMacAddrCapacity | 1.3.6.1.4.1.2272.1.100.1.6 | Integer32 | read-only | Mac Address Capacity |
| rc2kCpuEthernetPortTable | 1.3.6.1.4.1.2272.1.100.2 | not-accessible | 2k CPU Ethernet Port table | |
| rc2kCpuEthernetPortEntry | 1.3.6.1.4.1.2272.1.100.2.1 | not-accessible | Entry containing infomation of 2k CPU Ethernet Port | |
| NUM rc2kCpuEthernetPortIfIndex | 1.3.6.1.4.1.2272.1.100.2.1.1 | InterfaceIndex | read-only | IfIndex of the port. |
| STR rc2kCpuEthernetPortDescr | 1.3.6.1.4.1.2272.1.100.2.1.2 | DisplayString | read-only | Port description |
| INT rc2kCpuEthernetPortAdminStatus | 1.3.6.1.4.1.2272.1.100.2.1.3 | INTEGER | read-write | Used to configure the admininstrative status of the port. |
| INT rc2kCpuEthernetPortOperStatus | 1.3.6.1.4.1.2272.1.100.2.1.4 | INTEGER | read-only | Used to indicate the administrative status of the port. |
| IP rc2kCpuEthernetPortAddr | 1.3.6.1.4.1.2272.1.100.2.1.5 | IpAddress | read-write | Used to configure the port's IP address |
| IP rc2kCpuEthernetPortMask | 1.3.6.1.4.1.2272.1.100.2.1.6 | IpAddress | read-write | Used to configure the port's net mask |
| IP rc2kCpuEthernetPortGateway | 1.3.6.1.4.1.2272.1.100.2.1.7 | IpAddress | read-write | Used to configure the the IP address of the gateway that should be used to forward IP traffic. |
| IP rc2kCpuEthernetPortNetwork | 1.3.6.1.4.1.2272.1.100.2.1.8 | IpAddress | read-write | Used to configure the network that can be used to remotely manage this device. |
| T/F rc2kCpuEthernetPortAutoNegotiate | 1.3.6.1.4.1.2272.1.100.2.1.9 | TruthValue | read-write | Used to configure auto-negotiation on this port. |
| INT rc2kCpuEthernetPortAdminDuplex | 1.3.6.1.4.1.2272.1.100.2.1.10 | INTEGER | read-write | Used to configure the administrative duplex setting for this port. |
| INT rc2kCpuEthernetPortOperDuplex | 1.3.6.1.4.1.2272.1.100.2.1.11 | INTEGER | read-only | Used to indicate the operational duplex setting for this port. |
| INT rc2kCpuEthernetPortAdminSpeed | 1.3.6.1.4.1.2272.1.100.2.1.12 | INTEGER | read-write | Used to configure the administrative speed setting for this port. |
| INT rc2kCpuEthernetPortOperSpeed | 1.3.6.1.4.1.2272.1.100.2.1.13 | INTEGER | read-only | Used to indicate the operational duplex setting for this port. |
| T/F rc2kCpuEthernetPortEnableBootp | 1.3.6.1.4.1.2272.1.100.2.1.14 | TruthValue | read-write | Used to enable/disable the Bootp feature on this port. |
| MAC rc2kCpuEthernetPortMgmtMacAddr | 1.3.6.1.4.1.2272.1.100.2.1.15 | MacAddress | read-only | Used to indicate the mac addr for this port. |
| rc2kCpuSerialPortTable | 1.3.6.1.4.1.2272.1.100.3 | not-accessible | 2k CPU Serial Port table | |
| rc2kCpuSerialPortEntry | 1.3.6.1.4.1.2272.1.100.3.1 | not-accessible | Entry containing infomation of 2k CPU Serial Port | |
| NUM rc2kCpuSerialPortIfIndex | 1.3.6.1.4.1.2272.1.100.3.1.1 | InterfaceIndex | read-only | IfIndex for this port. |
| STR rc2kCpuSerialPortDescr | 1.3.6.1.4.1.2272.1.100.3.1.2 | DisplayString | read-only | Port description. |
| INT rc2kCpuSerialPortMode | 1.3.6.1.4.1.2272.1.100.3.1.3 | INTEGER | read-write | Used to configure the mode this port should operate in. |
| INT rc2kCpuSerialPortAdminStatus | 1.3.6.1.4.1.2272.1.100.3.1.4 | INTEGER | read-write | Used to configure the administrative status setting for this port. |
| INT rc2kCpuSerialPortOperStatus | 1.3.6.1.4.1.2272.1.100.3.1.5 | INTEGER | read-only | Used to indicate the operational status setting for this port. |
| INT rc2kCpuSerialPortBaudRate | 1.3.6.1.4.1.2272.1.100.3.1.6 | INTEGER | read-write | Used to configure the baud rate of this port. |
| INT rc2kCpuSerialPortDataBits | 1.3.6.1.4.1.2272.1.100.3.1.7 | INTEGER | read-write | Used to configure the number of data bits, per byte of data, this port should send/receive. |
| IP rc2kCpuSerialPortMyAddr | 1.3.6.1.4.1.2272.1.100.3.1.8 | IpAddress | read-write | Used to configure this port's IP address. Used for both 'slip' and 'ppp' modes. |
| IP rc2kCpuSerialPortPeerAddr | 1.3.6.1.4.1.2272.1.100.3.1.9 | IpAddress | read-write | Used to configure the peer's IP address. Used for both 'slip' and 'ppp' modes. |
| INT rc2kCpuSerialPortSlipMtu | 1.3.6.1.4.1.2272.1.100.3.1.10 | INTEGER | read-write | Used to configure the MTU for this port. Used for slip only. |
| T/F rc2kCpuSerialPortSlipTxRxCompress | 1.3.6.1.4.1.2272.1.100.3.1.11 | TruthValue | read-write | Used to enable/disable compression of TCP/IP packet headers on this port. Used for slip only. |
| T/F rc2kCpuSerialPortSlipRxCompress | 1.3.6.1.4.1.2272.1.100.3.1.12 | TruthValue | read-write | Used to enable/disable compression for receiving packets on this port. Used for slip only. |
| OCT rc2kCpuSerialPortPppConfigFile | 1.3.6.1.4.1.2272.1.100.3.1.13 | OCTET STRING | read-write | Used to configure the configuration file to use for PPP. |
| rc2kDevice | 1.3.6.1.4.1.2272.1.100.4 | |||
| rc2kDeviceGlobalTable | 1.3.6.1.4.1.2272.1.100.4.1 | not-accessible | 2k CPU Ethernet Port table | |
| rc2kDeviceGlobalEntry | 1.3.6.1.4.1.2272.1.100.4.1.1 | not-accessible | Entry containing infomation of 2k CPU Ethernet Port | |
| INT rc2kDeviceGlobalSlot | 1.3.6.1.4.1.2272.1.100.4.1.1.1 | INTEGER | read-only | slot number |
| I32 rc2kDeviceGlobalFlashBytesUsed | 1.3.6.1.4.1.2272.1.100.4.1.1.2 | Integer32 | read-only | bytes used |
| I32 rc2kDeviceGlobalFlashBytesFree | 1.3.6.1.4.1.2272.1.100.4.1.1.3 | Integer32 | read-only | bytes free |
| I32 rc2kDeviceGlobalFlashNumFiles | 1.3.6.1.4.1.2272.1.100.4.1.1.4 | Integer32 | read-only | # files in flash |
| I32 rc2kDeviceGlobalPcmciaBytesUsed | 1.3.6.1.4.1.2272.1.100.4.1.1.5 | Integer32 | read-only | bytes used |
| I32 rc2kDeviceGlobalPcmciaBytesFree | 1.3.6.1.4.1.2272.1.100.4.1.1.6 | Integer32 | read-only | bytes free |
| I32 rc2kDeviceGlobalPcmciaNumFiles | 1.3.6.1.4.1.2272.1.100.4.1.1.7 | Integer32 | read-only | # files in pcmcia |
| INT rc2kDeviceGlobalAction | 1.3.6.1.4.1.2272.1.100.4.1.1.8 | INTEGER | read-write | none(1), resetPcmcia(2), .. |
| INT rc2kDeviceGlobalResult | 1.3.6.1.4.1.2272.1.100.4.1.1.9 | INTEGER | read-only | Used to indicate the result of the last action performed on one of the system's device. |
| I32 rc2kDeviceSeparator1 | 1.3.6.1.4.1.2272.1.100.4.2 | Integer32 | read-only | This leaf is used to provide a separation between tables. No meaningful information is stored in this variable. |
| rc2kDeviceFlashFileTable | 1.3.6.1.4.1.2272.1.100.4.3 | not-accessible | 2k Flash table | |
| rc2kDeviceFlashFileEntry | 1.3.6.1.4.1.2272.1.100.4.3.1 | not-accessible | Entry containing infomation of 2k CPU Serial Port | |
| INT rc2kDeviceFlashFileSlot | 1.3.6.1.4.1.2272.1.100.4.3.1.1 | INTEGER | read-only | slot number |
| STR rc2kDeviceFlashFileName | 1.3.6.1.4.1.2272.1.100.4.3.1.2 | DisplayString | read-only | name of file |
| STR rc2kDeviceFlashFileDate | 1.3.6.1.4.1.2272.1.100.4.3.1.3 | DisplayString | read-only | date |
| I32 rc2kDeviceFlashFileSize | 1.3.6.1.4.1.2272.1.100.4.3.1.4 | Integer32 | read-only | size in bytes |
| T/F rc2kDevicePcmciaPresent | 1.3.6.1.4.1.2272.1.100.4.4 | TruthValue | read-only | pcmcia is a slower device. This leaf is used to stop the access into pcmcia file table when it got the end of flash file table. |
| rc2kDevicePcmciaFileTable | 1.3.6.1.4.1.2272.1.100.4.5 | not-accessible | 2k PCMCIA table | |
| rc2kDevicePcmciaFileEntry | 1.3.6.1.4.1.2272.1.100.4.5.1 | not-accessible | Entry containing infomation of 2k CPU Serial Port | |
| INT rc2kDevicePcmciaFileSlot | 1.3.6.1.4.1.2272.1.100.4.5.1.1 | INTEGER | read-only | slot number |
| STR rc2kDevicePcmciaFileName | 1.3.6.1.4.1.2272.1.100.4.5.1.2 | DisplayString | read-only | name of file |
| STR rc2kDevicePcmciaFileDate | 1.3.6.1.4.1.2272.1.100.4.5.1.3 | DisplayString | read-only | date |
| I32 rc2kDevicePcmciaFileSize | 1.3.6.1.4.1.2272.1.100.4.5.1.4 | Integer32 | read-only | size in bytes |
| I32 rc2kDeviceSeparator2 | 1.3.6.1.4.1.2272.1.100.4.6 | Integer32 | read-only | This leaf is used to provide a separation between tables. No meaningful information is stored in this variable. |
| rc2kBootConfigTable | 1.3.6.1.4.1.2272.1.100.5 | not-accessible | 2k Boot Configuration table | |
| rc2kBootConfigEntry | 1.3.6.1.4.1.2272.1.100.5.1 | not-accessible | Entry containing boot configuration information. | |
| INT rc2kBootConfigSlot | 1.3.6.1.4.1.2272.1.100.5.1.1 | INTEGER | read-only | slot number, tattoo use 3 as cpu slot, 4 is not valid cpu slot number |
| STR rc2kBootConfigLastBootConfigSource | 1.3.6.1.4.1.2272.1.100.5.1.2 | DisplayString | read-only | boot config source |
| STR rc2kBootConfigLastRuntimeImageSource | 1.3.6.1.4.1.2272.1.100.5.1.3 | DisplayString | read-only | runtime image source |
| STR rc2kBootConfigLastRuntimeConfigSource | 1.3.6.1.4.1.2272.1.100.5.1.4 | DisplayString | read-only | runtime config source |
| STR rc2kBootConfigPrimaryImageSource | 1.3.6.1.4.1.2272.1.100.5.1.5 | DisplayString | read-write | image source |
| STR rc2kBootConfigPrimaryConfigSource | 1.3.6.1.4.1.2272.1.100.5.1.6 | DisplayString | read-write | config source |
| STR rc2kBootConfigSecondaryImageSource | 1.3.6.1.4.1.2272.1.100.5.1.7 | DisplayString | read-write | image source |
| STR rc2kBootConfigSecondaryConfigSource | 1.3.6.1.4.1.2272.1.100.5.1.8 | DisplayString | read-write | config source |
| STR rc2kBootConfigTertiaryImageSource | 1.3.6.1.4.1.2272.1.100.5.1.9 | DisplayString | read-write | image source |
| STR rc2kBootConfigTertiaryConfigSource | 1.3.6.1.4.1.2272.1.100.5.1.10 | DisplayString | read-write | config source |
| T/F rc2kBootConfigEnableAutoBoot | 1.3.6.1.4.1.2272.1.100.5.1.11 | TruthValue | read-write | auto boot mode |
| T/F rc2kBootConfigEnableFactoryDefaults | 1.3.6.1.4.1.2272.1.100.5.1.12 | TruthValue | read-write | use factory default |
| T/F rc2kBootConfigEnableDebugMode | 1.3.6.1.4.1.2272.1.100.5.1.13 | TruthValue | read-write | debug mode |
| T/F rc2kBootConfigEnableHwWatchDogTimer | 1.3.6.1.4.1.2272.1.100.5.1.14 | TruthValue | read-write | hw watch dog timer |
| T/F rc2kBootConfigEnableRebootOnError | 1.3.6.1.4.1.2272.1.100.5.1.15 | TruthValue | read-write | reboot on error |
| T/F rc2kBootConfigEnableTelnetServer | 1.3.6.1.4.1.2272.1.100.5.1.16 | TruthValue | read-write | telnet server |
| T/F rc2kBootConfigEnableRloginServer | 1.3.6.1.4.1.2272.1.100.5.1.17 | TruthValue | read-write | rlogin server |
| T/F rc2kBootConfigEnableFtpServer | 1.3.6.1.4.1.2272.1.100.5.1.18 | TruthValue | read-write | ftp server |
| T/F rc2kBootConfigEnableTftpServer | 1.3.6.1.4.1.2272.1.100.5.1.19 | TruthValue | read-write | tftp server |
| STR rc2kBootConfigSwVersion | 1.3.6.1.4.1.2272.1.100.5.1.20 | DisplayString | read-only | current sw version |
| INT rc2kBootConfigMulticastConfigProfile | 1.3.6.1.4.1.2272.1.100.5.1.21 | INTEGER | read-only | multicast config |
| T/F rc2kBootConfigEnableSshServer | 1.3.6.1.4.1.2272.1.100.5.1.22 | TruthValue | read-write | ssh server |
| T/F rc2kBootConfigEnableAltLed | 1.3.6.1.4.1.2272.1.100.5.1.23 | TruthValue | read-write | Boot flag for enableing Alternate LED |
| STR rc2kBootConfigPrimaryBackupConfigSource | 1.3.6.1.4.1.2272.1.100.5.1.24 | DisplayString | read-write | primary backup config source (safeconfig) |
| STR rc2kBootConfigSecondaryBackupConfigSource | 1.3.6.1.4.1.2272.1.100.5.1.25 | DisplayString | read-write | secondary backup config source (safeconfig) |
| STR rc2kBootConfigTertiaryBackupConfigSource | 1.3.6.1.4.1.2272.1.100.5.1.26 | DisplayString | read-write | tertiary backup config source (safeconfig) |
| T/F rc2kBootConfigEnable8616ReAutoneg | 1.3.6.1.4.1.2272.1.100.5.1.27 | TruthValue | read-write | Enable re-autoneg for 8616SX Cards (Intel GMAC fix) |
| STR rc2kBootConfigMezzImageSource | 1.3.6.1.4.1.2272.1.100.5.1.28 | DisplayString | read-write | Mezz image source |
| T/F rc2kBootConfigEnableMezz | 1.3.6.1.4.1.2272.1.100.5.1.29 | TruthValue | read-write | Enable/disable Mezz Flag |
| STR rc2kBootConfigPrimaryLicenseSource | 1.3.6.1.4.1.2272.1.100.5.1.30 | DisplayString | read-write | primary license file name |
| STR rc2kBootConfigSecondaryLicenseSource | 1.3.6.1.4.1.2272.1.100.5.1.31 | DisplayString | read-write | secondary license file name |
| STR rc2kBootConfigTertiaryLicenseSource | 1.3.6.1.4.1.2272.1.100.5.1.32 | DisplayString | read-write | tertiary license file name |
| T/F rc2kBootConfigEnableCfPcCompat | 1.3.6.1.4.1.2272.1.100.5.1.44 | TruthValue | read-write | Enable/disable CF PC compatibility flag |
| rc2kCardTable | 1.3.6.1.4.1.2272.1.100.6 | not-accessible | 2k Card table | |
| rc2kCardEntry | 1.3.6.1.4.1.2272.1.100.6.1 | not-accessible | Entry containing information of 2k Card | |
| INT rc2kCardIndex | 1.3.6.1.4.1.2272.1.100.6.1.1 | INTEGER | read-only | slot number. |
| INT rc2kCardFrontType | 1.3.6.1.4.1.2272.1.100.6.1.2 | INTEGER | read-only | Used to indicate card types in the Accelar 8000 product families. For Accelar 8000 devices, all cards use an encoded value according to the following rule: | 6 | 1 | 5 | 4 | 1 | 3 | 4 | 8 | +------+-------+-------+-------+------------+------+------+------+ bits : |31-26 | 25 | 24-20 | 19-16 | 15 | 14-12 | 11-8 | 7-0 | +------+-------+-------+-------+----+-------+------+------+------+ field : | a | b | c | d | e | f | g | h | +------+-------+-------+-------+----+-------+------+------+------+ a : Family type/Product line (6 bits (5 bits usuable) (was 4 bits)) MSB bit31 should not be used (MIB compiler fails) 0x0-00 = 0000-00 = Reserved 0x1-00 = 0001-00 = Monoploy non specific (e.g backplane, psu, fans) 0x2-00 = 0010-00 = Boardwalk 0x2-01 = 0010-01 = Power Ranger 0x3-00 = 0011-00 = Marvin Gardens 0x4-00 = 0100-00 = Thunderbolt (was Pacific) 0x5-00 = 0101-00 = PP8300 (was ParkPlace) 0x6-00 = 0110-00 = Central Office (only used in chassis) 0x7-00 = 0111-00 = Alteon WebSystems b : Interface / Device type variation: 1 bit (was 3 bits, 2 bits were stolen by faimly) MSB bit31 should not be used (MIB compiler fails) 0x0-00 = 0000-00 = Reserved 0x1-00 = 0001-00 = Monoploy non specific (e.g backplane, psu, fans) 0x2-00 = 0010-00 = Boardwalk 0x2-01 = 0010-01 = Power Ranger 0x3-00 = 0011-00 = Marvin Gardens 0x4-00 = 0100-00 = Thunderbolt (was Pacific) 0x5-00 = 0101-00 = PP8300 (was ParkPlace) 0x6-00 = 0110-00 = Central Office (only used in chassis) 0x7-00 = 0111-00 = Alteon WebSystems b : Interface / Device type variation: (Were 3 bits, 2 bits taken by family) 0x1 = 1 = M-module (128K RARU records) c : Interface / device type: (5 bits) 0x0 = 00000 = CPU 0x1 = 00001 = Switch fabric 0x2 = 00010 = Copper Ethernet 0x3 = 00011 = Fiber Ethernet 0x4 = 00100 = Sonet (Packets) 0x5 = 00101 = ATM 0x6 = 00110 = Token Ring 0x7 = 00111 = RMON 0x8 = 01000 = BFM (Frame or cells indicated by field 'a' above) 0x9 = 01001 = PSU 0xa = 01010 = Fan Tray 0xb = 01011 = Chassis/Backplane 0xc = 01100 = CPU Mezz 0xd = 01101 = SSL 0xe = 01110 = LaunchPad 0xf = 01111 = reserved for future 0x10 = 10000 = reserved for future 0x11 = 10001 = reserved for future 0x12 = 10010 = reserved for future 0x13 = 10011 = WSM Fiber Ethernet d : Maximum speed (highest negotiable speed) (4 bits) 0x0 = 0000 = 10 Mbit 0x1 = 0001 = 100 Mbit 0x2 = 0010 = 1 Gbit 0x3 = 0011 = 10 Gbit 0x4 = 0100 = OC-3 0x5 = 0101 = OC-12 0x6 = 0110 = OC-48 0x7 = 0111 = OC-92 0x8 = 1000 = OC-192 0x9 = 1001 = 4 Mbit (TR) 0xa = 1010 = 16 Mbit (TR) 0xb = 1011 = E3 0xc = 1100 = DS1 0xd = 1101 = DS3 0xe = 1110 = none (no PHY interfaces on board) 0xf = 1111 = Max speed indicated implicitly in field (c) (for expansion) e : AM&OM-06/28/2006: This bit was originally used to indicate port redundancy. For PR it is used as a differentiator between Boomslang (0) and Copperhead (1). 0=non-redundant, (1 bit) 1=redundant f : Card specific info. (3 bits) For Gigabit used as follows: 000=short-haul (SX) 010=long-haul (LX) 100=extra-distance (DX) 101=GBIC For 10 Gigabit used as follws 000 = 10GE WAN serial 1310nm (XLW) 001 = 10GE WAN serial 1550nm (XEW) 100 = 10GE LAN serial 1310nm (XLR) 101 = 10GE LAN serial 1550nm (XER) 011 = 10GE LAN/WAN (XZW) For ATM/Sonet used as follows 000 = multi mode 001 = single mode 010 = single or multimode 011 = not applicable (e.g., copper has no mode) For Marvin Gardens, indicates number of MDA slots 000 = none 001 = one option slots 010 = two option slots 011 = three option slots For Power Supplies: 000 = AC PSU 001 = DC PSU For CPU Mezz: 000 = MPC755/MPC107 Mezz For SSL: 000 = server offloading 001 = end to end encryption For WSM: 000 = WSM mode 001 = ASFM mode For 8003 (3 slot) chassis differentiation: 000 = ERS 8003 001 = MERS 8003-R (Triumph) 000: PP8300 48TX, 10/100/1000 without POL 001: PP8300 48TX, 10/100/1000 with POL 010: SFP 000: non SFP g : Chassis type (4 bits, possibly MSB 2 bits are extension of field b) 0x0 = 00-00 = work-group (single card switches, etc) 0x1 = 00-01 = back-bone (chassis based products) 0x2 = 00-10 = MDA (option modules) h : Number of ports (binary representation obmited) (8 bits) (for ACIM/BFM cards, this is number of octapids/blackbirds/dea) 0x00 = no ports (cpus, switch fabrics) 0x01 = 1-port, 0x02 = 2-port, 0x04 = 4-port, 0x06 = 6-port, 0x08 = 8-port, 0x0c = 12-port, 0x10 = 16-port, 0x18 = 24-port, 0x22 = 36-port, 0x30 = 48-port, 0x40 = 64-port. |
| STR rc2kCardFrontDescription | 1.3.6.1.4.1.2272.1.100.6.1.3 | DisplayString | read-only | description |
| INT rc2kCardFrontAdminStatus | 1.3.6.1.4.1.2272.1.100.6.1.4 | INTEGER | read-write | Used to indicate the administrative status of this card |
| INT rc2kCardFrontOperStatus | 1.3.6.1.4.1.2272.1.100.6.1.5 | INTEGER | read-only | Used to indicate the operational status of this card. |
| STR rc2kCardFrontSerialNum | 1.3.6.1.4.1.2272.1.100.6.1.6 | DisplayString | read-only | serial number of card |
| STR rc2kCardFrontHwVersion | 1.3.6.1.4.1.2272.1.100.6.1.7 | DisplayString | read-only | hardware version |
| STR rc2kCardFrontPartNumber | 1.3.6.1.4.1.2272.1.100.6.1.8 | DisplayString | read-only | part number |
| STR rc2kCardFrontDateCode | 1.3.6.1.4.1.2272.1.100.6.1.9 | DisplayString | read-only | date code |
| STR rc2kCardFrontDeviations | 1.3.6.1.4.1.2272.1.100.6.1.10 | DisplayString | read-only | deviations |
| MAC rc2kCardFrontMacAddr | 1.3.6.1.4.1.2272.1.100.6.1.11 | MacAddress | read-only | base mac address |
| INT rc2kCardBackType | 1.3.6.1.4.1.2272.1.100.6.1.12 | INTEGER | read-only | Refer to rc2kCardFrontType for the encoding scheme |
| STR rc2kCardBackDescription | 1.3.6.1.4.1.2272.1.100.6.1.13 | DisplayString | read-only | description |
| STR rc2kCardBackSerialNum | 1.3.6.1.4.1.2272.1.100.6.1.14 | DisplayString | read-only | serial number of card |
| STR rc2kCardBackHwVersion | 1.3.6.1.4.1.2272.1.100.6.1.15 | DisplayString | read-only | hardware version |
| STR rc2kCardBackPartNumber | 1.3.6.1.4.1.2272.1.100.6.1.16 | DisplayString | read-only | part number |
| STR rc2kCardBackDateCode | 1.3.6.1.4.1.2272.1.100.6.1.17 | DisplayString | read-only | date code |
| STR rc2kCardBackDeviations | 1.3.6.1.4.1.2272.1.100.6.1.18 | DisplayString | read-only | deviations |
| INT rc2kCardPCMCIAType | 1.3.6.1.4.1.2272.1.100.6.1.19 | INTEGER | read-only | Used to indicate the type of PCMCIA card currently installed in this CPU card, if any. For non-CPU cards, this variable has no meaning and will always be set to none(1). |
| STR rc2kCardPCMCIADescr | 1.3.6.1.4.1.2272.1.100.6.1.20 | DisplayString | read-only | PCMCIA descriptor |
| STR rc2kCardASICDescr | 1.3.6.1.4.1.2272.1.100.6.1.21 | DisplayString | read-only | ASIC descriptor |
| T/F rc2kCardFrontMasterIO | 1.3.6.1.4.1.2272.1.100.6.1.22 | TruthValue | read-only | Used to indicate whether an IO card in a 8100 device is operating in the 'master' mode. This variable is not meaningful for non-IO cards and non-8100 devices. |
| T/F rc2kCardSmltOnSingleCpSupported | 1.3.6.1.4.1.2272.1.100.6.1.23 | TruthValue | read-only | Used to indicate whether an IO card is updated to support SMLT on single Cp feature or not. |
| INT rc2kCardMezzCard | 1.3.6.1.4.1.2272.1.100.6.1.24 | INTEGER | read-only | Used to indicate the CPU Mezz card |
| OCT rc2kCardMezzSerialNum | 1.3.6.1.4.1.2272.1.100.6.1.26 | OCTET STRING | read-only | Used to get the serial number of the mezz |
| INT rc2kCardMezzHwVersion | 1.3.6.1.4.1.2272.1.100.6.1.27 | INTEGER | read-only | Used to get the HW version of the mezz. The value of HW Version corresponds to the value of part number. |
| INT rc2kCardMezzPartNum | 1.3.6.1.4.1.2272.1.100.6.1.28 | INTEGER | read-only | Used to get the part number of the mezz. The value of part number corresponds to the value of HW Version. |
| INT rc2kCardSlotPriority | 1.3.6.1.4.1.2272.1.100.6.1.29 | INTEGER | read-write | Used to indicate the priority of the slot for power management. It will take effect only after reboot. |
| INT rc2kCardSlotOriginalPriority | 1.3.6.1.4.1.2272.1.100.6.1.30 | INTEGER | read-only | Priority of the slot for power management which the swtich has currently booted with. It will remain the same until the next reboot. |
| STR rc2kCardModuleSerialNum | 1.3.6.1.4.1.2272.1.100.6.1.33 | DisplayString | read-only | Module serial number. It is only applicable to the RS module. And it is not applicable to old version of the R module and CP |
| STR rc2kCardModulePartNumber | 1.3.6.1.4.1.2272.1.100.6.1.34 | DisplayString | read-only | Module part number. It is only applicable to the RS module. And it is not applicable to old version of the R module and CP |
| STR rc2kCardModuleAssemblyDate | 1.3.6.1.4.1.2272.1.100.6.1.35 | DisplayString | read-only | Module assemly date. It is only applicable to the RS module. And it is not applicable to old version of the R module and CP |
| rc2kCopyFile | 1.3.6.1.4.1.2272.1.100.7 | |||
| OCT rc2kCopyFileSource | 1.3.6.1.4.1.2272.1.100.7.1 | OCTET STRING | read-write | source file |
| OCT rc2kCopyFileDestination | 1.3.6.1.4.1.2272.1.100.7.2 | OCTET STRING | read-write | dest file |
| INT rc2kCopyFileAction | 1.3.6.1.4.1.2272.1.100.7.3 | INTEGER | read-write | start or cancell |
| INT rc2kCopyFileResult | 1.3.6.1.4.1.2272.1.100.7.4 | INTEGER | read-only | result |
| rc2kQos | 1.3.6.1.4.1.2272.1.100.8 | |||
| rc2kQosQosTable | 1.3.6.1.4.1.2272.1.100.8.1 | not-accessible | This table is used to define the Quality Of Service(QOS) profiles for the system. The system can support eight different QOS levels. Each QOS level can be individually configured. | |
| rc2kQosQosEntry | 1.3.6.1.4.1.2272.1.100.8.1.1 | not-accessible | QOS profile entry. | |
| INT rc2kQosQosRow | 1.3.6.1.4.1.2272.1.100.8.1.1.1 | INTEGER | read-only | Used to uniquely identify a row in this table. |
| INT rc2kQosQosLevel | 1.3.6.1.4.1.2272.1.100.8.1.1.2 | INTEGER | read-only | QOS level |
| STR rc2kQosQosName | 1.3.6.1.4.1.2272.1.100.8.1.1.3 | DisplayString | read-write | Qos level name |
| I32 rc2kQosQosAdminWeight | 1.3.6.1.4.1.2272.1.100.8.1.1.4 | Integer32 | read-write | Administrative transmit opportunity percentage |
| I32 rc2kQosQosOperWeight | 1.3.6.1.4.1.2272.1.100.8.1.1.5 | Integer32 | read-only | Operational transmit opportunity percentage |
| INT rc2kQosOctapidMode | 1.3.6.1.4.1.2272.1.100.8.1.1.6 | INTEGER | read-write | Octapid mode |
| INT rc2kQosQosAdminThreshold | 1.3.6.1.4.1.2272.1.100.8.1.1.7 | INTEGER | read-write | Administrative queue threshold |
| INT rc2kQosQosOperThreshold | 1.3.6.1.4.1.2272.1.100.8.1.1.8 | INTEGER | read-only | Operational queue threshold |
| INT rc2kQosPidMode | 1.3.6.1.4.1.2272.1.100.8.1.1.9 | INTEGER | read-write | Pid mode |
| rc2kQosIngressTagToQosTable | 1.3.6.1.4.1.2272.1.100.8.2 | not-accessible | This table is used to specify the 802.1P to QOS (802.1P->QOS) mapping on packet ingress. | |
| rc2kQosIngressTagToQosEntry | 1.3.6.1.4.1.2272.1.100.8.2.1 | not-accessible | Entry containing infomation of 8021P->Qos mapping | |
| INT rc2kQosIngressTagToQosRow | 1.3.6.1.4.1.2272.1.100.8.2.1.1 | INTEGER | read-only | Used to uniquely identify a row in this table. |
| INT rc2kQosIngressTagToQosInIeee8021P | 1.3.6.1.4.1.2272.1.100.8.2.1.2 | INTEGER | read-only | 802.1P |
| INT rc2kQosIngressTagToQosQosLevel | 1.3.6.1.4.1.2272.1.100.8.2.1.3 | INTEGER | read-write | Qos level |
| rc2kQosIngressDsFieldToQosTable | 1.3.6.1.4.1.2272.1.100.8.3 | not-accessible | This table is used to specify the DSCP field to QOS (DsField->QOS) mapping on packet ingress. | |
| rc2kQosIngressDsFieldToQosEntry | 1.3.6.1.4.1.2272.1.100.8.3.1 | not-accessible | Entry containing infomation of DsField->Qos mapping | |
| INT rc2kQosIngressDsFieldToQosRow | 1.3.6.1.4.1.2272.1.100.8.3.1.1 | INTEGER | read-only | Used to uniquely identify a row in this table. |
| INT rc2kQosIngressDsFieldToQosInDsField | 1.3.6.1.4.1.2272.1.100.8.3.1.2 | INTEGER | read-only | diffserv dsField |
| INT rc2kQosIngressDsFieldToQosQosLevel | 1.3.6.1.4.1.2272.1.100.8.3.1.3 | INTEGER | read-write | qos level |
| rc2kQosEgressQosToTagTable | 1.3.6.1.4.1.2272.1.100.8.4 | not-accessible | This table is used to specify the QOS to 802.1P (QOS->802.1P) mapping on packet egress. | |
| rc2kQosEgressQosToTagEntry | 1.3.6.1.4.1.2272.1.100.8.4.1 | not-accessible | Entry containing infomation of Qos->Qos mapping | |
| INT rc2kQosEgressQosToTagRow | 1.3.6.1.4.1.2272.1.100.8.4.1.1 | INTEGER | read-only | Used to uniquely identify a row in this table. |
| INT rc2kQosEgressQosToTagQosLevel | 1.3.6.1.4.1.2272.1.100.8.4.1.2 | INTEGER | read-only | qos level |
| INT rc2kQosEgressQosToTagOutIeee8021P | 1.3.6.1.4.1.2272.1.100.8.4.1.3 | INTEGER | read-write | 802.1P |
| rc2kQosEgressQosToDsFieldTable | 1.3.6.1.4.1.2272.1.100.8.5 | not-accessible | This table is used to specify the QOS to DSCP field (QOS->DsField) mapping on packet egress. | |
| rc2kQosEgressQosToDsFieldEntry | 1.3.6.1.4.1.2272.1.100.8.5.1 | not-accessible | Entry containing infomation of Qos->Qos mapping | |
| INT rc2kQosEgressQosToDsFieldRow | 1.3.6.1.4.1.2272.1.100.8.5.1.1 | INTEGER | read-only | Used to uniquely identify a row in this table. |
| INT rc2kQosEgressQosToDsFieldQosLevel | 1.3.6.1.4.1.2272.1.100.8.5.1.2 | INTEGER | read-only | qos level |
| INT rc2kQosEgressQosToDsFieldOutDsField | 1.3.6.1.4.1.2272.1.100.8.5.1.3 | INTEGER | read-write | diffserv dsField |
| rc2kQosTrafficProfileTable | 1.3.6.1.4.1.2272.1.100.8.6 | not-accessible | This table is used to specify traffic profiles for the system. These traffic profiles are used for policying purposes to guarantee streams of traffic do not egress the system above a certain rate. These traffic profiles are applied in the 'rcIpFilterTable'. | |
| rc2kQosTrafficProfileEntry | 1.3.6.1.4.1.2272.1.100.8.6.1 | not-accessible | Entry containing infomation of Qos->Qos mapping | |
| INT rc2kQosTrafficProfileId | 1.3.6.1.4.1.2272.1.100.8.6.1.1 | INTEGER | read-only | Profile id |
| STR rc2kQosTrafficProfileName | 1.3.6.1.4.1.2272.1.100.8.6.1.2 | DisplayString | read-write | Profile name |
| T/F rc2kQosTrafficProfileEnable | 1.3.6.1.4.1.2272.1.100.8.6.1.3 | TruthValue | read-write | Enable this entry |
| T/F rc2kQosTrafficProfileTranslateDscpEnable | 1.3.6.1.4.1.2272.1.100.8.6.1.4 | TruthValue | read-write | Used to specify whether translation of the DSCP field should be performed. If enabled, the value in the DSCP field for packets that fall within the traffic profile will get translated to 'rc2kQosTrafficProfileInProfileDscp'. Packets that fall outside the traffic profile will get translated to 'rc2kQosTrafficProfileOutProfileDscp'. If disabled, no translation is performed. |
| STR rc2kQosTrafficProfileInProfileDscp | 1.3.6.1.4.1.2272.1.100.8.6.1.5 | DisplayString | read-write | Used to specify the DSCP value for 'good' packets. |
| STR rc2kQosTrafficProfileOutProfileDscp | 1.3.6.1.4.1.2272.1.100.8.6.1.6 | DisplayString | read-write | Used to specify the DSCP value for 'violation' packets. |
| T/F rc2kQosTrafficProfileDiscardEnable | 1.3.6.1.4.1.2272.1.100.8.6.1.7 | TruthValue | read-write | Used to specify whether packets that fall outside the traffic profile should be discarded. |
| I32 rc2kQosTrafficProfileAverageRate | 1.3.6.1.4.1.2272.1.100.8.6.1.8 | Integer32 | read-write | Average rate in packets per second. |
| I32 rc2kQosTrafficProfilePeakRate | 1.3.6.1.4.1.2272.1.100.8.6.1.9 | Integer32 | read-write | Peak rate in packets per second. |
| ROW rc2kQosTrafficProfileRowStatus | 1.3.6.1.4.1.2272.1.100.8.6.1.10 | RowStatus | read-write | Used to create/delete entries. |
| rc2kQosIngressDscpToQosTable | 1.3.6.1.4.1.2272.1.100.8.7 | not-accessible | This table is used to specify the DSCP to QOS (Dscp->QOS) mapping on packet ingress. | |
| rc2kQosIngressDscpToQosEntry | 1.3.6.1.4.1.2272.1.100.8.7.1 | not-accessible | Entry containing information of Dscp->Qos mapping | |
| INT rc2kQosIngressDscpToQosRow | 1.3.6.1.4.1.2272.1.100.8.7.1.1 | INTEGER | read-only | Used to uniquely identify a row in this table. |
| INT rc2kQosIngressDscpToQosInDscp | 1.3.6.1.4.1.2272.1.100.8.7.1.2 | INTEGER | read-only | A 6-bit value used to define the Differentiated Service Code Point(DSCP). |
| STR rc2kQosIngressDscpToQosInDscpBinaryFormat | 1.3.6.1.4.1.2272.1.100.8.7.1.3 | DisplayString | read-only | The 'rc2kQosIngressDscpToQosInDscp' value shown in a binary format (network order). |
| INT rc2kQosIngressDscpToQosQosLevel | 1.3.6.1.4.1.2272.1.100.8.7.1.4 | INTEGER | read-write | qos level |
| rc2kQosEgressQosToDscpTable | 1.3.6.1.4.1.2272.1.100.8.8 | not-accessible | This table is used to specify the QOS to DSCP field (QOS->DsField) mapping on packet egress. | |
| rc2kQosEgressQosToDscpEntry | 1.3.6.1.4.1.2272.1.100.8.8.1 | not-accessible | Entry containing infomation of Qos->Qos mapping | |
| INT rc2kQosEgressQosToDscpRow | 1.3.6.1.4.1.2272.1.100.8.8.1.1 | INTEGER | read-only | Used to uniquely identify a row in this table. |
| INT rc2kQosEgressQosToDscpQosLevel | 1.3.6.1.4.1.2272.1.100.8.8.1.2 | INTEGER | read-only | qos level |
| INT rc2kQosEgressQosToDscpOutDscp | 1.3.6.1.4.1.2272.1.100.8.8.1.3 | INTEGER | read-write | A 6-bit value used to define the Differentiated Service Code Point(DSCP). |
| STR rc2kQosEgressQosToDscpOutDscpBinaryFormat | 1.3.6.1.4.1.2272.1.100.8.8.1.4 | DisplayString | read-only | The 'rc2kQosEgressQosToDscpOutDscp' value show in a binary format (network order). |
| rc2kAtm | 1.3.6.1.4.1.2272.1.100.9 | |||
| rc2kAtmGlobal | 1.3.6.1.4.1.2272.1.100.9.1 | |||
| T/F rc2kAtmElanStatsClearAll | 1.3.6.1.4.1.2272.1.100.9.1.1 | TruthValue | read-write | Clear all Elan Statistics |
| rc2kAtmPortTable | 1.3.6.1.4.1.2272.1.100.9.2 | not-accessible | ATM port table | |
| rc2kAtmPortEntry | 1.3.6.1.4.1.2272.1.100.9.2.1 | not-accessible | Entry containing infomation of ATM port | |
| NUM rc2kAtmPortIfIndex | 1.3.6.1.4.1.2272.1.100.9.2.1.1 | InterfaceIndex | read-only | port number |
| INT rc2kAtmPortNumVpiBits | 1.3.6.1.4.1.2272.1.100.9.2.1.2 | INTEGER | read-write | # of vpi bits. For OC3, the max number of vpibits is 6. However, for OC12, it is 8. Both media types share the same MIB object. |
| INT rc2kAtmPortNumVciBits | 1.3.6.1.4.1.2272.1.100.9.2.1.3 | INTEGER | read-write | # of vci bits |
| INT rc2kAtmPortMediaType | 1.3.6.1.4.1.2272.1.100.9.2.1.4 | INTEGER | read-only | media type |
| T/F rc2kAtmPortScrambleEnable | 1.3.6.1.4.1.2272.1.100.9.2.1.5 | TruthValue | read-write | enable scramble |
| INT rc2kAtmPortFramingMode | 1.3.6.1.4.1.2272.1.100.9.2.1.6 | INTEGER | read-write | port framing mode |
| INT rc2kAtmPortClockSource | 1.3.6.1.4.1.2272.1.100.9.2.1.7 | INTEGER | read-write | clock source |
| INT rc2kAtmPortLineSpeed | 1.3.6.1.4.1.2272.1.100.9.2.1.8 | INTEGER | read-only | line speed |
| INT rc2kAtmPortLoopBackMode | 1.3.6.1.4.1.2272.1.100.9.2.1.9 | INTEGER | read-write | loop back mode |
| MAC rc2kAtmPortMacAddress | 1.3.6.1.4.1.2272.1.100.9.2.1.10 | MacAddress | read-only | XLR assigned MAC addr |
| rc2kAtmPvcTable | 1.3.6.1.4.1.2272.1.100.9.3 | not-accessible | ATM Pvc table | |
| rc2kAtmPvcEntry | 1.3.6.1.4.1.2272.1.100.9.3.1 | not-accessible | Entry containing infomation of ATM Pvc | |
| NUM rc2kAtmPvcIfIndex | 1.3.6.1.4.1.2272.1.100.9.3.1.1 | InterfaceIndex | read-only | port number |
| INT rc2kAtmPvcVpi | 1.3.6.1.4.1.2272.1.100.9.3.1.2 | INTEGER | read-only | vpi of this pvc |
| INT rc2kAtmPvcVci | 1.3.6.1.4.1.2272.1.100.9.3.1.3 | INTEGER | read-only | vci of this pvc |
| I32 rc2kAtmPvcPvcId | 1.3.6.1.4.1.2272.1.100.9.3.1.4 | Integer32 | read-only | internal pvc id |
| STR rc2kAtmPvcName | 1.3.6.1.4.1.2272.1.100.9.3.1.5 | DisplayString | read-write | name of pvc |
| INT rc2kAtmPvcEncapsulation | 1.3.6.1.4.1.2272.1.100.9.3.1.6 | INTEGER | read-write | encapsulation |
| INT rc2kAtmPvcServiceType | 1.3.6.1.4.1.2272.1.100.9.3.1.7 | INTEGER | read-write | service type |
| INT rc2kAtmPvcPeakCellRate | 1.3.6.1.4.1.2272.1.100.9.3.1.8 | INTEGER | read-write | Peak cell rate in cells per second. The maximum peak cell rate is half of the line rate. The peak cell rate for MDA type OC12 must be less than 733491. However, for OC3, it is less than 182783. |
| INT rc2kAtmPvcSustainedCellRate | 1.3.6.1.4.1.2272.1.100.9.3.1.9 | INTEGER | read-write | Sustained cell rate in cells per second. The maximum peak cell rate is half of the line rate. The peak cell rate for MDA type OC12 must be less than 733491. However, for OC3, it is less than 182783. |
| INT rc2kAtmPvcMaxBurstSize | 1.3.6.1.4.1.2272.1.100.9.3.1.10 | INTEGER | read-write | max burst size |
| ROW rc2kAtmPvcRowStatus | 1.3.6.1.4.1.2272.1.100.9.3.1.11 | RowStatus | read-write | row status |
| T/F rc2kAtmPvcOamLbMgmtEnable | 1.3.6.1.4.1.2272.1.100.9.3.1.12 | TruthValue | read-write | Indicate whether end-to-end F5 OAM loopback is enabled. When it is enabled, OAM loopback request is sent periodically |
| INT rc2kAtmPvcOamLbSendFrequency | 1.3.6.1.4.1.2272.1.100.9.3.1.13 | INTEGER | read-write | Number of seconds between transmitting OAM loopback request |
| INT rc2kAtmPvcOamLbRetryFrequency | 1.3.6.1.4.1.2272.1.100.9.3.1.14 | INTEGER | read-write | Number of seconds between retry |
| INT rc2kAtmPvcOamLbUpCount | 1.3.6.1.4.1.2272.1.100.9.3.1.15 | INTEGER | read-write | Number of consecutive end-to-end F5 OAM loopback cell responses that must be received in order to change a PVC connection state to up |
| INT rc2kAtmPvcOamLbDownCount | 1.3.6.1.4.1.2272.1.100.9.3.1.16 | INTEGER | read-write | Number of consecutive end-to-end F5 OAM loopback cell responses that are not received in order to change a PVC state to down. |
| T/F rc2kAtmPvcOamTrapEnable | 1.3.6.1.4.1.2272.1.100.9.3.1.17 | TruthValue | read-write | Indicate whether OAM trap is enabled. When it is enabled, a trap is sent to the management station when rc2kAtmPvcOamVcStatus is going up or down. |
| INT rc2kAtmPvcOamVcStatus | 1.3.6.1.4.1.2272.1.100.9.3.1.18 | INTEGER | read-only | Indicate the status of PVC link. Not Managed--VC is not being managed by OAM. Down Verify --An OAM loopback failed. End-to-end F5 OAM loopback cells are sent at retry frequency to verify the VC is really down. After down-count unsuccessful retries, the VC goes to the down state (see definition of rc2kAtmPvcOamLoopbackDownCount). Down --VC has not received responses to by end-to-end F5 OAM loopback cells. Up Verify -- An OAM loopback was successful. End-to-end F5 OAM loopback cells are sent at retry frequency to verify the VC is really up. After up-count successive and successful loopback retries, the VC goes to the Up state (see definition of rc2kAtmPvcOamLoopbackUpCount). Up - End-to-end loopbacks are successful. |
| C32 rc2kAtmPvcOamLbRequestSent | 1.3.6.1.4.1.2272.1.100.9.3.1.19 | Counter32 | read-only | Number of OAM loopback request sent |
| C32 rc2kAtmPvcOamLbReplySent | 1.3.6.1.4.1.2272.1.100.9.3.1.20 | Counter32 | read-only | Number of OAM loopback reply sent |
| C32 rc2kAtmPvcOamLbReplyReceived | 1.3.6.1.4.1.2272.1.100.9.3.1.21 | Counter32 | read-only | Number of OAM loopback reply received |
| rc2kAtm1483ElanTable | 1.3.6.1.4.1.2272.1.100.9.5 | not-accessible | ATM 1483Elan table | |
| rc2kAtm1483ElanEntry | 1.3.6.1.4.1.2272.1.100.9.5.1 | not-accessible | Entry containing infomation of ATM 1483Elan | |
| NUM rc2kAtm1483ElanIfIndex | 1.3.6.1.4.1.2272.1.100.9.5.1.1 | InterfaceIndex | read-only | port number |
| I32 rc2kAtm1483ElanElanId | 1.3.6.1.4.1.2272.1.100.9.5.1.2 | Integer32 | read-only | Elan Id |
| INT rc2kAtm1483ElanNumPvcIds | 1.3.6.1.4.1.2272.1.100.9.5.1.3 | INTEGER | read-only | # pvc-ids in list |
| IDL rc2kAtm1483ElanPvcIds | 1.3.6.1.4.1.2272.1.100.9.5.1.4 | IdList | read-write | list of pvc-ids. each pvc-id is represented by a 32 bit value this field can contain a maximum of 64 pvc-ids. |
| I32 rc2kAtm1483ElanVlanId | 1.3.6.1.4.1.2272.1.100.9.5.1.5 | Integer32 | read-write | vlan tag for this 1483 |
| ROW rc2kAtm1483ElanRowStatus | 1.3.6.1.4.1.2272.1.100.9.5.1.6 | RowStatus | read-write | row status |
| INT rc2kAtm1483ElanConnectType | 1.3.6.1.4.1.2272.1.100.9.5.1.7 | INTEGER | read-write | connection type |
| MAC rc2kAtm1483ElanVlanMacAddress | 1.3.6.1.4.1.2272.1.100.9.5.1.8 | MacAddress | read-only | mac for vlan |
| MAC rc2kAtm1483ElanDummyMacAddress | 1.3.6.1.4.1.2272.1.100.9.5.1.9 | MacAddress | read-only | dummy mac for the other router |
| IP rc2kAtm1483ElanLocalIpAddress | 1.3.6.1.4.1.2272.1.100.9.5.1.10 | IpAddress | read-write | local ip, if ConnectType is ip(2) |
| IP rc2kAtm1483ElanRemoteIpAddress | 1.3.6.1.4.1.2272.1.100.9.5.1.11 | IpAddress | read-write | remote ip, if ConnectType is ip(2) |
| T/F rc2kAtm1483ElanInArpSendEnable | 1.3.6.1.4.1.2272.1.100.9.5.1.12 | TruthValue | read-write | enable arp sending on the port, if ConnectType is ip(2) |
| INT rc2kAtm1483ElanInArpSendInterval | 1.3.6.1.4.1.2272.1.100.9.5.1.13 | INTEGER | read-write | interval of arp sending on the port, if ConnectType is ip(2) |
| INT rc2kAtm1483ElanIpxVlanEncapMethod | 1.3.6.1.4.1.2272.1.100.9.5.1.14 | INTEGER | read-write | vlan encapsulation method, if ConnectType is ipx(3) |
| INT rc2kAtm1483ElanIpxNetworkNum | 1.3.6.1.4.1.2272.1.100.9.5.1.15 | INTEGER | read-write | network number, if ConnectType is ipx(3) |
| I32 rc2kAtm1483ElanStgId | 1.3.6.1.4.1.2272.1.100.9.5.1.16 | Integer32 | read-only | An identifier used to identify a STG in the device, only in bridge mode |
| I32 rc2kAtm1483ElanrcStgTaggedBpduVlanId | 1.3.6.1.4.1.2272.1.100.9.5.1.17 | Integer32 | read-only | The VLAN ID to be used for tagging BPDUs, only in bridge mode. |
| OCT rc2kAtm1483ElanIpxNetworkAddr | 1.3.6.1.4.1.2272.1.100.9.5.1.18 | OCTET STRING | read-write | network number, instead of rc2kAtm1483ElanIpxNetworkNum |
| rc2kAtmSioCardConfigTable | 1.3.6.1.4.1.2272.1.100.9.8 | not-accessible | 2kAtm Sio Card Config Table | |
| rc2kAtmSioCardConfigEntry | 1.3.6.1.4.1.2272.1.100.9.8.1 | not-accessible | Entry containing infomation of 2kAtm Sio Card Config. | |
| I32 rc2kAtmSioCardConfigSlotIndex | 1.3.6.1.4.1.2272.1.100.9.8.1.1 | Integer32 | read-only | slot Index. |
| INT rc2kAtmSioCardConfigAction | 1.3.6.1.4.1.2272.1.100.9.8.1.2 | INTEGER | read-write | |
| INT rc2kAtmSioCardConfigTraceMode | 1.3.6.1.4.1.2272.1.100.9.8.1.3 | INTEGER | read-write | |
| STR rc2kAtmSioCardConfigImageFileName | 1.3.6.1.4.1.2272.1.100.9.8.1.4 | DisplayString | read-only | ATM Image file name. |
| INT rc2kAtmSioCardConfigElanStatsEnable | 1.3.6.1.4.1.2272.1.100.9.8.1.5 | INTEGER | read-write | Enable/Disable Elan Statistics collection |
| INT rc2kAtmSioCardConfigStatsPollPeriod | 1.3.6.1.4.1.2272.1.100.9.8.1.6 | INTEGER | read-write | Time interval after which Elan statistics would be polled |
| rc2kAtmPortStatsTable | 1.3.6.1.4.1.2272.1.100.9.10 | not-accessible | ATM port statistics table | |
| rc2kAtmPortStatsEntry | 1.3.6.1.4.1.2272.1.100.9.10.1 | not-accessible | Entry containing infomation of ATM port statistics | |
| NUM rc2kAtmPortStatsIfIndex | 1.3.6.1.4.1.2272.1.100.9.10.1.1 | InterfaceIndex | read-only | port number |
| C64 rc2kAtmPortStatsInCells | 1.3.6.1.4.1.2272.1.100.9.10.1.2 | Counter64 | read-only | Number of Cells received from ATM interface |
| C64 rc2kAtmPortStatsOutCells | 1.3.6.1.4.1.2272.1.100.9.10.1.3 | Counter64 | read-only | Number of Cells transmitted by ATM interface |
| C64 rc2kAtmPortStatsOutIdleCells | 1.3.6.1.4.1.2272.1.100.9.10.1.4 | Counter64 | read-only | Number of Idle Cells transmitted |
| C32 rc2kAtmPortStatsInHecCorrected | 1.3.6.1.4.1.2272.1.100.9.10.1.5 | Counter32 | read-only | Number of received cells in which HCS was corrected |
| C32 rc2kAtmPortStatsInHecUncorrected | 1.3.6.1.4.1.2272.1.100.9.10.1.6 | Counter32 | read-only | Number of received cells dropped because HCS couldn't be corrected |
| C32 rc2kAtmPortStatsInUnknownProtos | 1.3.6.1.4.1.2272.1.100.9.10.1.7 | Counter32 | read-only | Number of received cells dropped with wrong VPI/VCI |
| C32 rc2kAtmPortStatsInPkts | 1.3.6.1.4.1.2272.1.100.9.10.1.8 | Counter32 | read-only | Number of AAL5 CPCS PDUs received |
| C32 rc2kAtmPortStatsOutPkts | 1.3.6.1.4.1.2272.1.100.9.10.1.9 | Counter32 | read-only | Number of AAL5 CPCS PDUs transmitted |
| C32 rc2kAtmPortStatsInDroppedPkts | 1.3.6.1.4.1.2272.1.100.9.10.1.10 | Counter32 | read-only | Number of AAL5 CPCS PDUs dropped due to resource exhaustion |
| C32 rc2kAtmPortStatsOutDroppedPkts | 1.3.6.1.4.1.2272.1.100.9.10.1.11 | Counter32 | read-only | Number of AAL5 CPCS PDUs dropped because the transmitter closed the channel |
| rc2kAtmVPortStatsTable | 1.3.6.1.4.1.2272.1.100.9.11 | not-accessible | ATM Elan statistics table | |
| rc2kAtmVPortStatsEntry | 1.3.6.1.4.1.2272.1.100.9.11.1 | not-accessible | Entry containing infomation of ATM Elan statistics | |
| NUM rc2kAtmVPortStatsIfIndex | 1.3.6.1.4.1.2272.1.100.9.11.1.1 | InterfaceIndex | read-only | port number |
| I32 rc2kAtmVPortStatsVlanId | 1.3.6.1.4.1.2272.1.100.9.11.1.2 | Integer32 | read-only | Vlan Id |
| INT rc2kAtmVPortStatsClear | 1.3.6.1.4.1.2272.1.100.9.11.1.3 | INTEGER | read-write | Clear Elan Stats |
| C64 rc2kAtmVPortStatsInOctets | 1.3.6.1.4.1.2272.1.100.9.11.1.4 | Counter64 | read-only | AAL5 CPCS PDU octects received from ATM interface |
| C64 rc2kAtmVPortStatsOutOctets | 1.3.6.1.4.1.2272.1.100.9.11.1.5 | Counter64 | read-only | AAL5 CPCS PDU octects transmitted out of ATM interface |
| C32 rc2kAtmVPortStatsInErrors | 1.3.6.1.4.1.2272.1.100.9.11.1.6 | Counter32 | read-only | AAL5 CPCS PDUs received with errors from ATM interface. These errors include CRC-32 errors,SAR time-out errors And oversized SDU errors |
| C32 rc2kAtmVPortStatsOutErrors | 1.3.6.1.4.1.2272.1.100.9.11.1.7 | Counter32 | read-only | Number of AAL5 CPCS PDUs that couldn't be transmitted due to errors |
| C32 rc2kAtmVPortStatsInDiscards | 1.3.6.1.4.1.2272.1.100.9.11.1.8 | Counter32 | read-only | Number of received AAL5 CPCS PDUs discarded |
| C32 rc2kAtmVPortStatsOutDiscards | 1.3.6.1.4.1.2272.1.100.9.11.1.9 | Counter32 | read-only | Number of AAL5 CPCS PDUs which are to be transmitted but discarded |
| C32 rc2kAtmVPortStatsInUcastPkts | 1.3.6.1.4.1.2272.1.100.9.11.1.10 | Counter32 | read-only | Received ethernet/IP/IPX packets whose destination address is neither a multicast nor a broadcast address |
| C32 rc2kAtmVPortStatsOutUcastPkts | 1.3.6.1.4.1.2272.1.100.9.11.1.11 | Counter32 | read-only | Forwarded ethernet/IP/IPX packets whose destination address is neither a multicast nor a broadcast address |
| C32 rc2kAtmVPortStatsInMulticastPkts | 1.3.6.1.4.1.2272.1.100.9.11.1.12 | Counter32 | read-only | Received ethernet/IP/IPX packets whose destination MAC address(or IP address in case of IP ELAN type) is multicast MAC address or class D IP address (in case of IP ELAN type) |
| C32 rc2kAtmVPortStatsOutMulticastPkts | 1.3.6.1.4.1.2272.1.100.9.11.1.13 | Counter32 | read-only | Forwarded ethernet/IP/IPX packets whose destination MAC address(or IP address in case of IP ELAN type) is multicast MAC address or class D IP address (in case of IP ELAN type) |
| C32 rc2kAtmVPortStatsInBroadcastPkts | 1.3.6.1.4.1.2272.1.100.9.11.1.14 | Counter32 | read-only | Received ethernet/IP/IPX packets whose destination address in broadcast address |
| C32 rc2kAtmVPortStatsOutBroadcastPkts | 1.3.6.1.4.1.2272.1.100.9.11.1.15 | Counter32 | read-only | Forwarded ethernet/IP/IPX packets whose destination address in broadcast address |
| rc2kMdaCardTable | 1.3.6.1.4.1.2272.1.100.10 | not-accessible | Mda card table | |
| rc2kMdaCardEntry | 1.3.6.1.4.1.2272.1.100.10.1 | not-accessible | Entry containing infomation of Mda card | |
| INT rc2kMdaCardSlotNum | 1.3.6.1.4.1.2272.1.100.10.1.1 | INTEGER | read-only | Slot number |
| INT rc2kMdaCardMdaNum | 1.3.6.1.4.1.2272.1.100.10.1.2 | INTEGER | read-only | MDA number within slot. MDAs are numbered from left to right. |
| INT rc2kMdaCardType | 1.3.6.1.4.1.2272.1.100.10.1.3 | INTEGER | read-only | Refer to rc2kCardFrontType for the encoding scheme |
| STR rc2kMdaCardDescription | 1.3.6.1.4.1.2272.1.100.10.1.4 | DisplayString | read-only | description of mda card |
| INT rc2kMdaCardAdminStatus | 1.3.6.1.4.1.2272.1.100.10.1.5 | INTEGER | read-write | administration status of mda card |
| INT rc2kMdaCardOperStatus | 1.3.6.1.4.1.2272.1.100.10.1.6 | INTEGER | read-only | operation status of mda card. |
| STR rc2kMdaCardSerialNum | 1.3.6.1.4.1.2272.1.100.10.1.7 | DisplayString | read-only | serial number of mad card |
| STR rc2kMdaCardHwVersion | 1.3.6.1.4.1.2272.1.100.10.1.8 | DisplayString | read-only | hardware version of mda card |
| STR rc2kMdaCardPartNumber | 1.3.6.1.4.1.2272.1.100.10.1.9 | DisplayString | read-only | part number of mda card |
| STR rc2kMdaCardDateCode | 1.3.6.1.4.1.2272.1.100.10.1.10 | DisplayString | read-only | date code of mda card |
| STR rc2kMdaCardDeviations | 1.3.6.1.4.1.2272.1.100.10.1.11 | DisplayString | read-only | hardware deviation infomation of mda card |
| MAC rc2kMdaCardMacAddr | 1.3.6.1.4.1.2272.1.100.10.1.12 | MacAddress | read-only | base mac address of mda card |
| I32 rc2kMdaCardNumPorts | 1.3.6.1.4.1.2272.1.100.10.1.13 | Integer32 | read-only | number of ports on mda card |
| NUM rc2kMdaCardFirstIfIndex | 1.3.6.1.4.1.2272.1.100.10.1.14 | InterfaceIndex | read-only | first ifindex number on mda card |
| NUM rc2kMdaCardLastIfIndex | 1.3.6.1.4.1.2272.1.100.10.1.15 | InterfaceIndex | read-only | last ifindex number on mda card |
| rc2kCpuEthernetPortRouteTable | 1.3.6.1.4.1.2272.1.100.11 | not-accessible | 2k CPU Ethernet Port Route table | |
| rc2kCpuEthernetPortRouteEntry | 1.3.6.1.4.1.2272.1.100.11.1 | not-accessible | Entry containing infomation of 2k CPU Ethernet Port | |
| IP rc2kCpuEthernetPortRouteNetwork | 1.3.6.1.4.1.2272.1.100.11.1.1 | IpAddress | read-write | Used to configure the network that can be used to remotely manage this device. |
| IP rc2kCpuEthernetPortRouteGateway | 1.3.6.1.4.1.2272.1.100.11.1.2 | IpAddress | read-write | Used to configure the the IP address of the gateway that should be used to forward IP traffic. |
| ROW rc2kCpuEthernetPortRouteRowStatus | 1.3.6.1.4.1.2272.1.100.11.1.3 | RowStatus | read-write | row status |
| rc2kCPUTypeGeneralGroup | 1.3.6.1.4.1.2272.1.100.12 | |||
| INT rc2kCPUTypePrimary | 1.3.6.1.4.1.2272.1.100.12.1 | INTEGER | read-only | Used to identify the type of primary CPU |
| INT rc2kCPUTypeSecondary | 1.3.6.1.4.1.2272.1.100.12.2 | INTEGER | read-only | Used to identify the type of secondary CPU |
| INT rc2kCPUTypePrimaryMemory | 1.3.6.1.4.1.2272.1.100.12.3 | INTEGER | read-only | Used to get the memory size of Primary CPU |
| INT rc2kCPUTypeSecondaryMemory | 1.3.6.1.4.1.2272.1.100.12.4 | INTEGER | read-only | Used to get the memory size of Secondary CPU |
| rc2kCpuEthernetPortIpv6RouteTable | 1.3.6.1.4.1.2272.1.100.13 | not-accessible | 2k CPU Ethernet Port Route table for Ipv6 | |
| rc2kCpuEthernetPortIpv6RouteEntry | 1.3.6.1.4.1.2272.1.100.13.1 | not-accessible | Entry containing information of 2k CPU Ethernet Port Ipv6 | |
| ADR rc2kCpuEthernetPortIpv6RouteNetwork | 1.3.6.1.4.1.2272.1.100.13.1.1 | Ipv6Address | not-accessible | Used to configure the ipv6 network that can be used to remotely manage this device. |
| INT rc2kCpuEthernetPortIpv6RoutePrefixLength | 1.3.6.1.4.1.2272.1.100.13.1.2 | INTEGER | not-accessible | The length of the prefix (in bits). |
| ADR rc2kCpuEthernetPortIpv6RouteGateway | 1.3.6.1.4.1.2272.1.100.13.1.3 | Ipv6Address | not-accessible | Used to configure the the IPv6 address of the gateway that should be used to forward IPv6 traffic. |
| ROW rc2kCpuEthernetPortIpv6RouteRowStatus | 1.3.6.1.4.1.2272.1.100.13.1.4 | RowStatus | read-create | row status |
| rcPowerRanger | 1.3.6.1.4.1.2272.1.202 | |||
| rcPowerRangerMib | 1.3.6.1.4.1.2272.1.202.1 | |||
| rcPowerRangerNotifications | 1.3.6.1.4.1.2272.1.202.1.0 | |||
| rcPowerRangerObjects | 1.3.6.1.4.1.2272.1.202.1.1 | |||
| rcPrQos | 1.3.6.1.4.1.2272.1.202.1.1.1 | |||
| rcPrQosScalars | 1.3.6.1.4.1.2272.1.202.1.1.1.1 | |||
| INT rcPrQosPolicyNumPolicies | 1.3.6.1.4.1.2272.1.202.1.1.1.1.1 | INTEGER | read-only | A list of Global Policer (GPID) entries. The number of entries is given by rcPrQosPolicyNumPolicies. |
| INT rcPrQosTxQueueNumTemplates | 1.3.6.1.4.1.2272.1.202.1.1.1.1.2 | INTEGER | read-only | The number of egress queue templates currently defined in the switch. |
| rcPrQosPolicyTable | 1.3.6.1.4.1.2272.1.202.1.1.1.2 | not-accessible | A list of GPID entries. The number of entries is given by rcPrQosPolicyNumPolicies. | |
| rcPrQosPolicyEntry | 1.3.6.1.4.1.2272.1.202.1.1.1.2.1 | not-accessible | Entry containing configuration information for a particular global policer. | |
| INT rcPrQosPolicyGpId | 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.1 | INTEGER | read-only | A value that uniquely identifies Global Policer associated with this entry. |
| STR rcPrQosPolicyName | 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.2 | DisplayString | read-write | An administratively-assigned name for this Global Policer. |
| INT rcPrQosPolicyPeakRate | 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.3 | INTEGER | read-write | Global Policer Peak Rate in Kilobit/sec. |
| INT rcPrQosPolicySvcRate | 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.4 | INTEGER | read-write | Global Policer Service Rate in Kilobit/sec. |
| LAN rcPrQosPolicyLaneMembers | 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.5 | LaneSet | read-write | The set of lanes that are members of this Global Policer. The string is 4 octets long, for a total of 32 bits. Each bit corresponds to a laneId. Each I/O slot has 4 laneIds. When a bit has the value one(1), the corresponding laneId is a member of the set. When a bit has the value zero(0), the corresponding laneId is not a member of the set. The encoding is such that the most significant bit of octet #1 corresponds to laneId 0, while the least significant bit of octet #4 corresponds to laneId 31. |
| ROW rcPrQosPolicyRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrQosLocalPolicyTable | 1.3.6.1.4.1.2272.1.202.1.1.1.3 | not-accessible | A list of local (aka physical) policer entries. | |
| rcPrQosLocalPolicyEntry | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1 | not-accessible | An entry containing configuration information for a particular local policer. | |
| INT rcPrQosLocalPolicyGpId | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.1 | INTEGER | read-only | A value of Global Policer ID corresponding to this local policer. |
| I32 rcPrQosLocalPolicyIndex | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.2 | Integer32 | read-only | A value that uniquely identifies the local Policer associated with this entry. Concatenation of tap.lane.lpid. |
| INT rcPrQosLocalPolicyPeakRate | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.3 | INTEGER | read-only | Local Policer Peak Rate in Kilobit/sec. Equals to that of corresponding Global Policer ID. |
| INT rcPrQosLocalPolicySvcRate | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.4 | INTEGER | read-only | Local Policer Service Rate in Kilobit/sec. Equals to that of corresponding Global Policer ID. |
| C64 rcPrQosLocalPolicyTotalPkts | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.5 | Counter64 | read-only | Local Policer Total Packets Count. |
| C64 rcPrQosLocalPolicyTotalBytes | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.6 | Counter64 | read-only | Local Policer Total Bytes Count. |
| C64 rcPrQosLocalPolicyBytesOverPeak | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.7 | Counter64 | read-only | Local Policer Bytes over Peak Rate Count. |
| C64 rcPrQosLocalPolicyBytesOverSvc | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.8 | Counter64 | read-only | Local Policer Bytes over Service Rate Count. |
| C64 rcPrQosLocalPolicyTotalPktsDropped | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.9 | Counter64 | read-only | The count of Local Policer Total Packets dropped due to reasons other than policing, e.g. congestion. |
| OCT rcPrQosLocalPolicyLaneMember | 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.10 | OCTET STRING | read-only | The lane that this Gpid has a local policing account on |
| rcPrQosTxQueueTemplateTable | 1.3.6.1.4.1.2272.1.202.1.1.1.4 | not-accessible | A list of egress queue templates. The number of templates is given by rcPrQosTxQueueNumTemplates. | |
| rcPrQosTxQueueTemplateEntry | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1 | not-accessible | Entry containing configuration information for a particular egress queue template. Queue is a set of egress queues. | |
| INT rcPrQosTxQueueTemplateId | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.1 | INTEGER | read-only | A value that uniquely identifies Egress Queue Template. |
| STR rcPrQosTxQueueTemplateName | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.2 | DisplayString | read-write | An administratively-assigned name for this egress Queue Template. |
| INT rcPrQosTxQueueTemplateMaxQueues | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.3 | INTEGER | read-create | Maximum number of queues in this Template. |
| INT rcPrQosTxQueueTemplateBalancedQueues | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.4 | INTEGER | read-write | Total number of Balanced Queues in this Template. |
| INT rcPrQosTxQueueTemplateHiPriQueues | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.5 | INTEGER | read-write | Total number of High Priority Queues in this Template. |
| INT rcPrQosTxQueueTemplateLoPriQueues | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.6 | INTEGER | read-write | Total number of Low Priority Queues in this Template. |
| I32 rcPrQosTxQueueTemplateTotalQueues | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.7 | Integer32 | read-only | Total number of queues in this Template. |
| OCT rcPrQosTxQueueTemplateBalancedQList | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.8 | OCTET STRING | read-only | List of Balanced Queues in this Template. |
| OCT rcPrQosTxQueueTemplateHiPriQList | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.9 | OCTET STRING | read-only | List of High Priority Queues in this Template. |
| OCT rcPrQosTxQueueTemplateLoPriQList | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.10 | OCTET STRING | read-only | List of Low Priority Queues in this Template. |
| OCT rcPrQosTxQueueTemplateTotalQLists | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.11 | OCTET STRING | read-only | List of Total Physical Queues in this Template. |
| INT rcPrQosTxQueueTemplateMinRateTotal | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.12 | INTEGER | read-only | Sum of minimum rate guarantees for this template. |
| INT rcPrQosTxQueueTemplateMaxRateHiPri | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.13 | INTEGER | read-only | Sum of maximum rate guarantees for high priority queues of this template. |
| POR rcPrQosTxQueueTemplatePortMembers | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.14 | PortSet | read-write | Port members of this template. |
| INT rcPrQosTxQueueTemplateFlags | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.15 | INTEGER | read-write | Bitset indicated template state. |
| T/F rcPrQosTxQueueTemplateApply | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.16 | TruthValue | read-write | When apply is issued by the administrator, the Egress Queue Set attributes are committed. |
| ROW rcPrQosTxQueueTemplateRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.17 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrQosTxQueueTable | 1.3.6.1.4.1.2272.1.202.1.1.1.5 | not-accessible | A list of elementary Egress queue entries. | |
| rcPrQosTxQueueEntry | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1 | not-accessible | Entry containing configuration information for a particular elementary egress queue. | |
| INT rcPrQosTxQueueTid | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.1 | INTEGER | read-write | Template ID of the template this queue belongs to. |
| INT rcPrQosTxQueueQid | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.2 | INTEGER | read-only | Queue Offset from the base queue for this port. |
| STR rcPrQosTxQueueName | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.3 | DisplayString | read-write | An NNSC name for this egress queue. Allowed only for 8 NNSC queues. |
| INT rcPrQosTxQueueStyle | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.4 | INTEGER | read-write | Egress queue style. |
| I32 rcPrQosTxQueueWeight | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.5 | Integer32 | read-only | Egress queue weight. Applicable for balanced queues and lo-pri queues only. |
| I32 rcPrQosTxQueueMaxRate | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.6 | Integer32 | read-write | Egress queue maximum rate, Kbs |
| I32 rcPrQosTxQueueMinRate | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.7 | Integer32 | read-write | Egress queue minimun rate guarantee, Kbs. Applicable for balanced queues and lo-pri queues only. |
| I32 rcPrQosTxQueueBquantum | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.8 | Integer32 | read-only | Bandwidth allocation unit. Applicable for balanced queues and lo-pri queues only. |
| I32 rcPrQosTxQueueMaxLength | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.9 | Integer32 | read-write | Maximum queue length. |
| INT rcPrQosTxQueueWredCurveSet | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.10 | INTEGER | read-write | Random Early Detection Number. |
| ROW rcPrQosTxQueueRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.11 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrQosTxQueueStatsTable | 1.3.6.1.4.1.2272.1.202.1.1.1.6 | not-accessible | A list of elementary Egress queue stats entries. | |
| rcPrQosTxQueueStatsEntry | 1.3.6.1.4.1.2272.1.202.1.1.1.6.1 | not-accessible | Entry containing statistics information for a particular elementary egress queue. | |
| NUM rcPrQosTxQueueStatsPort | 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.1 | InterfaceIndex | read-only | Port index of the stats table. |
| INT rcPrQosTxQueueStatsQid | 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.2 | INTEGER | read-only | Queue Offset from the base queue for this port. |
| C64 rcPrQosTxQueueStatsTotalPages | 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.3 | Counter64 | read-only | Total pages offered to the queue. |
| C64 rcPrQosTxQueueStatsDroppedPages | 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.4 | Counter64 | read-only | Total pages dropped by the queue. |
| INT rcPrQosTxQueueStatsUtilization | 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.5 | INTEGER | read-only | Utilization percentage of the queue. |
| rcPrQosIngressExpToQosTable | 1.3.6.1.4.1.2272.1.202.1.1.1.7 | not-accessible | This table is used to specify the Mpls EXP to QOS (Exp bit->QOS) mapping on packet ingress. | |
| rcPrQosIngressExpToQosEntry | 1.3.6.1.4.1.2272.1.202.1.1.1.7.1 | not-accessible | Entry containing information of Exp bit->Qos mapping | |
| INT rcPrQosIngressExpToQosIndex | 1.3.6.1.4.1.2272.1.202.1.1.1.7.1.1 | INTEGER | not-accessible | Used to uniquely identify a row in this table. |
| INT rcPrQosIngressExpToQosMplsExp | 1.3.6.1.4.1.2272.1.202.1.1.1.7.1.2 | INTEGER | read-only | The Mpls Exp bit level. |
| INT rcPrQosIngressExpToQosLevel | 1.3.6.1.4.1.2272.1.202.1.1.1.7.1.3 | INTEGER | read-write | qos level |
| ROW rcPrQosIngressExpToQosRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.1.7.1.4 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrQosEgressQosToExpTable | 1.3.6.1.4.1.2272.1.202.1.1.1.8 | not-accessible | This table is used to specify the QOS to Mpls EXP bit field (QOS->Exp bit) mapping on packet egress. | |
| rcPrQosEgressQosToExpEntry | 1.3.6.1.4.1.2272.1.202.1.1.1.8.1 | not-accessible | Entry containing infomation of Qos->Exp bit mapping | |
| INT rcPrQosEgressQosToExpIndex | 1.3.6.1.4.1.2272.1.202.1.1.1.8.1.1 | INTEGER | not-accessible | Used to uniquely identify a row in this table. |
| INT rcPrQosEgressQosToExpQosLevel | 1.3.6.1.4.1.2272.1.202.1.1.1.8.1.2 | INTEGER | read-only | qos level |
| INT rcPrQosEgressQosToExpMplsExp | 1.3.6.1.4.1.2272.1.202.1.1.1.8.1.3 | INTEGER | read-write | The Mpls EXP bit level. |
| ROW rcPrQosEgressQosToExpRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.1.8.1.4 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilter | 1.3.6.1.4.1.2272.1.202.1.1.2 | |||
| rcPrFilterScalars | 1.3.6.1.4.1.2272.1.202.1.1.2.1 | |||
| INT rcPrFilterActTableSize | 1.3.6.1.4.1.2272.1.202.1.1.2.1.1 | INTEGER | read-only | Used to indicate the number of Act entries in the rcPrFilterActTable. Default table size is 0 until the administrator configures any Act entries. |
| INT rcPrFilterAclTableSize | 1.3.6.1.4.1.2272.1.202.1.1.2.1.2 | INTEGER | read-only | Used to indicate the number of Acl entries in the rcPrFilterAclTable. Default table size is 0 until the administrator configures any Acl entries. |
| INT rcPrFilterAceTableSize | 1.3.6.1.4.1.2272.1.202.1.1.2.1.3 | INTEGER | read-only | Used to indicate the number of Ace entries in the rcPrFilterAceTable. Default table size is 0 until the administrator configures any Ace entries. The maximum size is # of Acls multiplied by # of Aces. |
| rcPrFilterAct | 1.3.6.1.4.1.2272.1.202.1.1.2.2 | |||
| rcPrFilterActTable | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1 | not-accessible | A table of Acts to store information of each Act entry. This table is indexed by the Act Id. | |
| rcPrFilterActEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1 | not-accessible | One Act Entry holding Act information. | |
| INT rcPrFilterActId | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.1 | INTEGER | read-only | A table of Acts to store information of each Act. This table is indexed by the Act Id. |
| STR rcPrFilterActName | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.2 | DisplayString | read-write | A descriptive name chosen by the administrator for the Act Entry. |
| INT rcPrFilterActArpAttrs | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.3 | INTEGER | read-write | Value is one or multiple (logical 'OR' of the following): none(0), operation(1) none: No Arp Attrs are selected or to clear other choices. operation: Only valid option for Arp attributes. |
| INT rcPrFilterActEthernetAttrs | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.4 | INTEGER | read-write | Value is one or multiple of the following: none(0), srcMac(1), dstMac(2), etherType(4), port(8), vlan(16), vlanTagPrio(32) none: If selected then unselect all other selections. |
| INT rcPrFilterActIpAttrs | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.5 | INTEGER | read-write | Value is one or multiple of the following: none(0), srcIp(1), dstIp(2), ipFragFlag(4), ipOptions(8), ipProtoType(16), dscp(32) none: If selected then unselect all other selections. |
| INT rcPrFilterActProtocolAttrs | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.6 | INTEGER | read-write | Value is one or multiple of the following: none(0), tcpSrcPort(1), udpSrcPort(2), tcpDstPort(4), udpDstPort(8), tcpFlags(16), icmpMsgType(32) none: If selected then unselect all other selections. |
| T/F rcPrFilterActApply | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.7 | TruthValue | read-write | When apply is issued by the administrator, the ACT attributes cannot be modified. |
| ROW rcPrFilterActRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.8 | RowStatus | read-write | Create/delete operations for this entry. The entry cannot be modified or deleted while there are Acls configured with this Act entry. |
| INT rcPrFilterActIpv6Attrs | 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.9 | INTEGER | read-write | Value is one or multiple of the following: none(0), srcIpv6(1), dstIpv6(4), nextHdr(16), none: If selected then unselect all other selections. |
| rcPrFilterActPatternTable | 1.3.6.1.4.1.2272.1.202.1.1.2.2.2 | not-accessible | A table of user-defined parameters of Acls to store information of each Acl. This table is indexed by the Act Id and PatternIndex. | |
| rcPrFilterActPatternEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1 | not-accessible | Entry containing Configuration information for a particular Act. | |
| INT rcPrFilterActPatternActId | 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.1 | INTEGER | read-only | An index to the ActPatternEntry, a unique identifier for Act entry in the range of Table Size. |
| INT rcPrFilterActPatternIndex | 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.2 | INTEGER | read-only | Indexes each user defined field pattern in an Acl entry. In this release only 3 patterns are allowed per ACT but we can have multiple patterns per ACL. |
| STR rcPrFilterActPatternName | 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.3 | DisplayString | read-write | A descriptive name chosen by the administrator for the Acl Pattern Entry. |
| INT rcPrFilterActPatternBase | 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.4 | INTEGER | read-write | User defined fields from headers to be used in the Aces of the Acl. |
| INT rcPrFilterActPatternOffset | 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.5 | INTEGER | read-write | Set Offset in bits to the beginning offset of the user defined field with selected header option as base. |
| INT rcPrFilterActPatternLength | 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.6 | INTEGER | read-write | The number of bits to extract beginning from the offset is set in rcPrFilterActPatternLength. Only 1-56 are valid. |
| ROW rcPrFilterActPatternRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.7 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilterAcl | 1.3.6.1.4.1.2272.1.202.1.1.2.3 | |||
| rcPrFilterAclTable | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1 | not-accessible | A table of Acls to store information of each Acl. This table is indexed by the Acl Id. | |
| rcPrFilterAclEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1 | not-accessible | Entry containing Configuration information for a particular Acl. | |
| INT rcPrFilterAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.1 | INTEGER | read-only | A unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAclActId | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.2 | INTEGER | read-write | A unique identifier for Act entry in the range of Table Size. |
| STR rcPrFilterAclName | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.3 | DisplayString | read-write | A descriptive name chosen by the administrator for the Acl Entry. |
| INT rcPrFilterAclType | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.4 | INTEGER | read-write | An Acl can be vlan-based or port-based. An Ace has a capability to match packets classified as 'ingress' and 'egress'. An ingress packet is assigned a value 'in' and an egress packet is assigned a value 'out'. |
| INT rcPrFilterAclAceListSize | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.5 | INTEGER | read-only | Indicates the number of Aces in a particular Acl. |
| INT rcPrFilterAclDefaultAction | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.6 | INTEGER | read-write | Indicates action to be taken when none of the Aces in the Acl match. |
| INT rcPrFilterAclGlobalAction | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.7 | INTEGER | read-write | Indicates action is applied to all Aces that match in an Acl. |
| ENA rcPrFilterAclState | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.8 | EnableValue | read-write | Enables/Disables the state of all Aces in the Acl |
| IDL rcPrFilterAclVlanList | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.9 | IdList | read-write | An array used to indicate all the VLANs to be associated with this Acl Entry. At present, only 4k Vlans are supported. |
| POR rcPrFilterAclPortList | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.10 | PortSet | read-write | Indicates the ports to be added to this Acl Entry. |
| ROW rcPrFilterAclRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.11 | RowStatus | read-write | Create/delete operations for the entry. Deleting a non-empty Acl results in deletion of member Aces and then the Acl. |
| INT rcPrFilterAclNumVlanIds | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.12 | INTEGER | read-only | Used to Indicate the number of VLAN ID's that are stored in the rcPrFilterAclVlanList. |
| INT rcPrFilterAclPktType | 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.13 | INTEGER | read-write | Indicates the packet type that thsi ACL is applicable to. |
| rcPrFilterAclStatsTable | 1.3.6.1.4.1.2272.1.202.1.1.2.3.2 | not-accessible | A table of Acls Statistics entries to store the Default Acl statistics for each Acl. This table is indexed by the Acl Id. | |
| rcPrFilterAclStatsEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1 | not-accessible | Entry containing default statistics information for a particular Acl. | |
| INT rcPrFilterAclStatsAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.1 | INTEGER | read-only | A unique identifier for Acl entry in the range of Table Size. |
| C64 rcPrFilterAclStatsMatchDefaultCounterPkts | 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.2 | Counter64 | read-only | Packet count of traffic not matching any of the Ace rules or hit the Default Action that have the count bit turned on in Acl Global Action. |
| C64 rcPrFilterAclStatsMatchDefaultOctets | 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.3 | Counter64 | read-only | Byte count of traffic not matching any of the Ace rules or hit the Default Action that have the count bit turned on in Acl Global Action. |
| T/F rcPrFilterAclStatsClear | 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.4 | TruthValue | read-write | Clear default statistics for ACL Filters. |
| rcPrFilterAce | 1.3.6.1.4.1.2272.1.202.1.1.2.4 | |||
| rcPrFilterAceTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1 | not-accessible | A table of Aces to store information of each Ace in context of its parent Acl. This is indexed by AclId and AceId. | |
| rcPrFilterAceEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1 | not-accessible | One Ace entry holding Ace information. Ace is a member of one Acl. | |
| INT rcPrFilterAceAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.1 | INTEGER | read-only | An index to the AceEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.2 | INTEGER | read-only | AceId uniquely identifies one Ace entry. |
| STR rcPrFilterAceName | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.3 | DisplayString | read-write | A descriptive name chosen by the administrator. System automatically assigns a name if the user has not assigned one. |
| INT rcPrFilterAceMode | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.4 | INTEGER | read-write | Operating Mode associated with the Ace is effective on the packets matching this Ace. |
| INT rcPrFilterAceRemarkDscp | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.5 | INTEGER | read-write | The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to PHB (like EF) or PHB-class(like AF1 which includes AF11, AF12,AF13) to mark specific diffserv class traffic. Set the field value to desired integer dscp code for rcPrFilterAceRemarkDscp field to mark non-standard traffic classes and local use PHBs. |
| INT rcPrFilterAceRemarkDot1Priority | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.6 | INTEGER | read-write | Dot1 Priority as described by Layer 2 standards, 802.1Q, 802.1P. |
| IP rcPrFilterAceRedirectNextHop | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.7 | IpAddress | read-write | Redirect matching IP traffic to the next hop. |
| INT rcPrFilterAceRedirectUnreach | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.8 | INTEGER | read-write | Set the desired behavior for redirected traffic in case the specified next-hop is not reachable. |
| INT rcPrFilterAcePolice | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.9 | INTEGER | read-write | Policing profile Identifier. Set the desired policing profile identifier. Set the value to 0 when policing is not desired. |
| ENA rcPrFilterAceAdminState | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.10 | EnableValue | read-write | Value indicating whether the Ace is enabled. An Ace can only be modified if it is disabled. |
| INT rcPrFilterAceOperState | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.11 | INTEGER | read-only | The current operational state of the Ace. |
| INT rcPrFilterAceEgressQueue | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.12 | INTEGER | read-write | Indicates the Egress Queue for 10/100 card. If only 1 value is specified then this value is applied to Queue1g and Queue10g as well. If 2 values are specified then the first value is applied to 10/100 card and the second value is applied to 1gig and 10gig cards. If all three values are specified, then all three values are applied respectively to the appropriate Egress Queue. If value is greater than 8, it will not be applied to the 10/100 card as it only has 8 queues. However, the value will be applied to the 1gig and 10gig card types. |
| INT rcPrFilterAceEgressQueue1g | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.13 | INTEGER | read-write | Indicates the Egress Queue for 1gig card. |
| INT rcPrFilterAceEgressQueue10g | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.14 | INTEGER | read-write | Indicates the Egress Queue for 10gig card. |
| INT rcPrFilterAceEgressQueueNNSC | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.15 | INTEGER | read-write | Ace Egress Queue NNSC. |
| INT rcPrFilterAceFlags | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.16 | INTEGER | read-write | Bitmask for the flags: none(0): Default value for the flags. stopOnMatch(1): set desired behavior for flag whether to stop or continue in case an Ace matching the packet is found. When this Ace is hit, match on other Aces with a lower priority is not attempted. count(2): set desired behavior for flag i.e. to enable/disable counting in case a packet matching the ace is found. copyToPrimaryCp(4): set to enable/disable copying of matching packets to primary CP. copyToSecondaryCp(8): set to enable/disable copying of matching packets to secondary CP. mirror(16): set to enable/disable mirroring the matching packets to an interface. System can mirror one port or mirror to 1 port. |
| ENA rcPrFilterAceStopOnMatch | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.17 | EnableValue | read-write | Value indicating whether stop-on-match option on the Ace is enabled. |
| INT rcPrFilterAceMltIndex | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.18 | INTEGER | read-write | If this action is specified, it will basically override the mlt-index picked by the mlt algorithm, when a packet is being sent out on MLT ports. |
| ROW rcPrFilterAceRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.19 | RowStatus | read-write | Create/delete operations for this entry. |
| ENA rcPrFilterAceIpfixState | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.20 | EnableValue | read-write | Value indicating whether ipfix option on the Ace is enabled. |
| ADR rcPrFilterAceRedirectNextHopIpv6 | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.21 | Ipv6Address | read-write | Redirect matching IPv6 traffic to the next hop. |
| POR rcPrFilterAceDstPortList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.22 | PortSet | read-create | Destination Port List for mirroring the packets. |
| I32 rcPrFilterAceDstVlanId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.23 | Integer32 | read-create | Destination Vlan to mirror the packets. |
| I32 rcPrFilterAceDstMltId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.24 | Integer32 | read-create | Destination Mlt to mirror the packets. |
| rcPrFilterAceEthSrcAddrTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.2 | not-accessible | A table of Aces to store Ethernet Source MAC Address Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceEthSrcAddrEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1 | not-accessible | One Ace entry holding Ace Ethernet Source MAC Address information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceEthSrcAddrAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.1 | INTEGER | read-only | An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceEthSrcAddrAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.2 | INTEGER | read-only | An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size. |
| OCT rcPrFilterAceEthSrcAddrList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.3 | OCTET STRING | read-write | The list of ethernet source address to match. |
| INT rcPrFilterAceEthSrcAddrListCount | 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.4 | INTEGER | read-write | Count to store the number of discrete ranges entered for the ethernet src address. |
| INT rcPrFilterAceEthSrcAddrOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.5 | INTEGER | read-write | Operators for Ace Ethernet Source MAC Address. |
| ROW rcPrFilterAceEthSrcAddrRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilterAceEthDstAddrTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.3 | not-accessible | A table of Aces to store Ethernet Destination MAC Address Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceEthDstAddrEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1 | not-accessible | One Ace entry holding Ace Ethernet Destination MAC Address information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceEthDstAddrAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.1 | INTEGER | read-only | An index to the AceEthDstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceEthDstAddrAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.2 | INTEGER | read-only | An index to the AceEthDstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| OCT rcPrFilterAceEthDstAddrList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.3 | OCTET STRING | read-write | List of ethernet destination address to match. |
| INT rcPrFilterAceEthDstAddrListCount | 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.4 | INTEGER | read-write | Count to store the number of discrete ranges entered for the ethernet dst address. |
| INT rcPrFilterAceEthDstAddrOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.5 | INTEGER | read-write | Operators for Ace Ethernet Destination MAC Address. |
| ROW rcPrFilterAceEthDstAddrRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilterAceEthEtherTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.4 | not-accessible | A table of Aces to store Ethernet Ether Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceEthEtherEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1 | not-accessible | One Ace entry holding Ace Ethernet Ether information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceEthEtherAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.1 | INTEGER | read-only | An index to the AceEthEtherEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceEthEtherAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.2 | INTEGER | read-only | An index to the AceEthEtherEntry, a unique identifier for Acl entry in the range of Table Size. |
| OCT rcPrFilterAceEthEtherTypeList | 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.3 | OCTET STRING | read-write | EtherType value from ethernet header. For example ARP uses 0x0806, IP uses 0x0800. The platform support determines the behavior for 802.1Q/p tagged packets. The EtherType for 802.1Q tagged frames is 0x8100. Valid range for the 16-bit Ether-type is 0..65535 and the attribute supports lists/ranges of values. Invalid ether-type value 65536 is interpreted as field is not desired in match criteria. |
| INT rcPrFilterAceEthEtherTypeListCount | 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.4 | INTEGER | read-write | Count to store the number of discrete ranges entered for the ethernet types. |
| INT rcPrFilterAceEthEtherTypeOper | 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.5 | INTEGER | read-write | Ethernet Type Operators. |
| ROW rcPrFilterAceEthEtherRowStatus | 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.6 | RowStatus | read-write | Create/delete operations for this entry. |
| rcPrFilterAceEthVlanTagPrioTable | 1.3.6.1.4.1.2272.1.202.1.1.2.4.5 | not-accessible | A table of Aces to store Ethernet Vlan Tag Priority Header information of each Ace in context of its parent Acl. | |
| rcPrFilterAceEthVlanTagPrioEntry | 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1 | not-accessible | One Ace entry holding Ace Ethernet Vlan Tag Priority information. An Ace is a member of one Acl. | |
| INT rcPrFilterAceEthVlanTagPrioAclId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.1 | INTEGER | read-only | An index to the AceEthVlanTagPrioEntry, a unique identifier for Acl entry in the range of Table Size. |
| INT rcPrFilterAceEthVlanTagPrioAceId | 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.2 | INTEGER | read-only | An index to the AceEthVlanTagPrioEntry, a unique identifier for Acl entry in the range of Table Size. |
6,485 OIDs total — showing 3,039-6,078 (page 2 of 3)