All MIBs › RAPID-CITY › rcIpxRipOutFilterInterface
rcIpxRipOutFilterInterface
Module: RAPID-CITY
OID (symbolic): RAPID-CITY::rcIpxRipOutFilterInterface
OID (numeric): 1.3.6.1.4.1.2272.1.24.10.1.1
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description:
IPX Network address. The interface to which the policy is applied.
What is rcIpxRipOutFilterInterface?
This object specifies the IPX network address of an interface where outbound RIP (Routing Information Protocol) traffic filtering policies should be applied. RIP is a legacy routing protocol used in older IPX networks, and this filter controls which routing updates are sent out a particular interface. Network administrators configure this read-write object to apply route filtering policies that restrict which networks are advertised to downstream routers.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.24.10.1.1 snmpwalk -v2c -c public <target> RAPID-CITY::rcIpxRipOutFilterInterface
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.24.10.1.1.1 snmpget -v2c -c public <target> RAPID-CITY::rcIpxRipOutFilterInterface.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.24.10.1.1.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.24 | rcIpx | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.24.10 | rcIpxRipOutFilterTable | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.24.10.1 | rcIpxRipOutFilterEntry | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.24.10.1.1 | rcIpxRipOutFilterInterface | RAPID-CITY |