All MIBs › RAPID-CITY › rc2kCpuSerialPortSlipMtu
rc2kCpuSerialPortSlipMtu
Module: RAPID-CITY
OID (symbolic): RAPID-CITY::rc2kCpuSerialPortSlipMtu
OID (numeric): 1.3.6.1.4.1.2272.1.100.3.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Used to configure the MTU for this port. Used for slip only.
What is rc2kCpuSerialPortSlipMtu?
This object configures the Maximum Transmission Unit (MTU) size for a serial port operating in Serial Line Internet Protocol (SLIP) mode, with a valid range of 0 to 224 bytes. It controls the maximum frame size that the serial interface will accept or transmit when using SLIP encapsulation for point-to-point links. Administrators adjust this parameter to match the MTU requirements of remote systems connected via the serial port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.100.3.1.10 snmpwalk -v2c -c public <target> RAPID-CITY::rc2kCpuSerialPortSlipMtu
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.100.3.1.10.1 snmpget -v2c -c public <target> RAPID-CITY::rc2kCpuSerialPortSlipMtu.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.100.3.1.10.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.100 | rc2k | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.100.3 | rc2kCpuSerialPortTable | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.100.3.1 | rc2kCpuSerialPortEntry | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.100.3.1.10 | rc2kCpuSerialPortSlipMtu | RAPID-CITY |