RAPID-CITY :: rcPlugOptModRxPowerHighAlarmThreshold

MIB Reference — IPNetwork Monitor · Updated September 12, 2026

All MIBsRAPID-CITYrcPlugOptModRxPowerHighAlarmThreshold

rcPlugOptModRxPowerHighAlarmThreshold

Module: RAPID-CITY

OID (symbolic): RAPID-CITY::rcPlugOptModRxPowerHighAlarmThreshold

OID (numeric): 1.3.6.1.4.1.2272.1.71.1.1.38

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: This value represents the vendor specified high receiver power threshold. If the measured received power exceeds this value, a receiver power high is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).

What is rcPlugOptModRxPowerHighAlarmThreshold?

This read-only value specifies the vendor-defined maximum received optical signal power (in microwatts, ranging from 0 to 65.535 milliwatts or -40 to 18.16 dBm) at which a high-power alarm is triggered. When measured receiver power exceeds this threshold, the system alerts that the optical signal is too strong. Network operators monitor this against actual received power readings to detect fiber over-illumination or fiber coupling issues that could damage receiver optics.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.71.1.1.38
snmpwalk -v2c -c public <target> RAPID-CITY::rcPlugOptModRxPowerHighAlarmThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.71.1.1.38.1
snmpget -v2c -c public <target> RAPID-CITY::rcPlugOptModRxPowerHighAlarmThreshold.1

Start monitoring Bay Networks/Nortel Accelar and Ethernet Routing Switch (ERS) chassis switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAPID-CITY::rcPlugOptModRxPowerHighAlarmThreshold OID value, configure state conditions and alerts, and monitor any Bay Networks/Nortel Accelar and Ethernet Routing Switch (ERS) chassis switches from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2272rapidCityRAPID-CITY
1.3.6.1.4.1.2272.1rcMgmtRAPID-CITY
1.3.6.1.4.1.2272.1.71rcPlugOptModRAPID-CITY
1.3.6.1.4.1.2272.1.71.1rcPlugOptModTableRAPID-CITY
1.3.6.1.4.1.2272.1.71.1.1rcPlugOptModEntryRAPID-CITY
1.3.6.1.4.1.2272.1.71.1.1.38rcPlugOptModRxPowerHighAlarmThresholdRAPID-CITY