All MIBs › RAPID-CITY › rcCfmTransmitL2TracePriority
rcCfmTransmitL2TracePriority
Module: RAPID-CITY
OID (symbolic): RAPID-CITY::rcCfmTransmitL2TracePriority
OID (numeric): 1.3.6.1.4.1.2272.1.69.35.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description:
Priority. 3 bit value to be used in the VLAN hdr, if present in the transmitted frame.
What is rcCfmTransmitL2TracePriority?
This object configures the 802.1p priority tag (0-7, known as PCP or Class of Service) that will be placed in the VLAN header of Connectivity Fault Management trace frames transmitted by the switch. It controls the network priority assigned to CFM diagnostic messages used to test L2 connectivity. Network operators use this setting to ensure that diagnostic traffic gets appropriate treatment, typically assigning a higher priority to prevent frame loss during congestion.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.69.35.1.2 snmpwalk -v2c -c public <target> RAPID-CITY::rcCfmTransmitL2TracePriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.69.35.1.2.1 snmpget -v2c -c public <target> RAPID-CITY::rcCfmTransmitL2TracePriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.69.35.1.2.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.69 | rcCfm | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.69.35 | rcCfmTransmitL2TraceTable | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.69.35.1 | rcCfmTransmitL2TraceEntry | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.69.35.1.2 | rcCfmTransmitL2TracePriority | RAPID-CITY |