All MIBs › RAPID-CITY › rcIpxRoutingEnable
rcIpxRoutingEnable
Module: RAPID-CITY
OID (symbolic): RAPID-CITY::rcIpxRoutingEnable
OID (numeric): 1.3.6.1.4.1.2272.1.24.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Global Ipx Routing control variable
What is rcIpxRoutingEnable?
This OID is a global yes/no switch that enables or disables IPX routing across the entire device. When enabled, the router handles IPX traffic; when disabled, IPX traffic is dropped. An operator would disable this if IPX is no longer used in the network, or enable it when adding legacy systems that require IPX support.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.24.1 snmpwalk -v2c -c public <target> RAPID-CITY::rcIpxRoutingEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.24.1.1 snmpget -v2c -c public <target> RAPID-CITY::rcIpxRoutingEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.24.1.1 s <value>
Start monitoring Bay Networks/Nortel Accelar and Ethernet Routing Switch (ERS) chassis switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAPID-CITY::rcIpxRoutingEnable OID value, configure state conditions and alerts, and monitor any Bay Networks/Nortel Accelar and Ethernet Routing Switch (ERS) chassis switches from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.24 | rcIpx | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.24.1 | rcIpxRoutingEnable | RAPID-CITY |