RAPID-CITY :: rcTengIfPromiscuousMode

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › RAPID-CITY › rcTengIfPromiscuousMode

rcTengIfPromiscuousMode

Module: RAPID-CITY

OID (symbolic): RAPID-CITY::rcTengIfPromiscuousMode

OID (numeric): 1.3.6.1.4.1.2272.1.50.1.4.1.17

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object has a value of false(2) If this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when the station accepts all packets/frames transmitted on the media. The value true(1) is only legal on certain types of media. If legal, setting this object to a value of true(1) may require the interface to be reset before becoming effective.

The value of rcTengIfPromiscuousMode does not affect the reception of broadcast and multicast packets/frames by the interface.

What is rcTengIfPromiscuousMode?

This OID stores a yes/no setting that controls whether the network interface accepts all transmitted packets or only those addressed to it. Setting this to 'yes' puts the interface in promiscuous mode, meaning it listens to all traffic on the network segment regardless of destination. Network operators enable this mode temporarily when using network monitoring tools (like packet sniffers) to capture and analyze all traffic passing through that port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.50.1.4.1.17
snmpwalk -v2c -c public <target> RAPID-CITY::rcTengIfPromiscuousMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.50.1.4.1.17.1
snmpget -v2c -c public <target> RAPID-CITY::rcTengIfPromiscuousMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.50.1.4.1.17.1 s <value>

Start monitoring Bay Networks/Nortel Accelar and Ethernet Routing Switch (ERS) chassis switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAPID-CITY::rcTengIfPromiscuousMode OID value, configure state conditions and alerts, and monitor any Bay Networks/Nortel Accelar and Ethernet Routing Switch (ERS) chassis switches from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2272rapidCityRAPID-CITY
1.3.6.1.4.1.2272.1rcMgmtRAPID-CITY
1.3.6.1.4.1.2272.1.50rcTengEnetRAPID-CITY
1.3.6.1.4.1.2272.1.50.1rcTengEnetStatsRAPID-CITY
1.3.6.1.4.1.2272.1.50.1.4rcTengIfXTableRAPID-CITY
1.3.6.1.4.1.2272.1.50.1.4.1rcTengIfXEntryRAPID-CITY
1.3.6.1.4.1.2272.1.50.1.4.1.17rcTengIfPromiscuousModeRAPID-CITY