All MIBs › RAPID-CITY › rcMplsLdpSessionHoldTime
rcMplsLdpSessionHoldTime
Module: RAPID-CITY
OID (symbolic): RAPID-CITY::rcMplsLdpSessionHoldTime
OID (numeric): 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.12
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description:
This is the session's hold time.
What is rcMplsLdpSessionHoldTime?
This object specifies the maximum idle time (in seconds) that an MPLS Label Distribution Protocol (LDP) session will remain active without receiving a keepalive message from the peer. If the hold time expires without a keepalive, the session terminates and labels are revoked. Operators adjust this value to tune session stability, balancing fast failure detection against false flaps from transient packet loss.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.12 snmpwalk -v2c -c public <target> RAPID-CITY::rcMplsLdpSessionHoldTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.12.1 snmpget -v2c -c public <target> RAPID-CITY::rcMplsLdpSessionHoldTime.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.74 | rcMpls | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.74.1 | rcMplsMib | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.74.1.1 | rcMplsObjects | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.74.1.1.3 | rcMplsLdpGroup | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6 | rcMplsLdpSessionTable | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1 | rcMplsLdpSessionEntry | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.12 | rcMplsLdpSessionHoldTime | RAPID-CITY |